summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_ali.c
diff options
context:
space:
mode:
authorAlan Cox <alan@redhat.com>2009-01-05 14:13:22 +0000
committerJeff Garzik <jgarzik@redhat.com>2009-01-08 16:09:11 -0500
commit1b2c357c301b76118973763e886d9f70a7f50f7e (patch)
tree0ca772edd989be84a87e9e04e1f4f926d12f9b4b /drivers/ata/pata_ali.c
parent978ff6db23279422046c1b3f89fe2045c234dc91 (diff)
downloadlinux-1b2c357c301b76118973763e886d9f70a7f50f7e.tar.bz2
pata_ali: force initialise a few bits
We can't assume some of the setup here on non x86 boxes. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata/pata_ali.c')
-rw-r--r--drivers/ata/pata_ali.c71
1 files changed, 38 insertions, 33 deletions
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 73c466e452ca..d2ea2db61e52 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -19,7 +19,9 @@
*
* TODO/CHECK
* Cannot have ATAPI on both master & slave for rev < c2 (???) but
- * otherwise should do atapi DMA.
+ * otherwise should do atapi DMA (For now for old we do PIO only for
+ * ATAPI)
+ * Review Sunblade workaround.
*/
#include <linux/kernel.h>
@@ -33,12 +35,14 @@
#include <linux/dmi.h>
#define DRV_NAME "pata_ali"
-#define DRV_VERSION "0.7.5"
+#define DRV_VERSION "0.7.7"
static int ali_atapi_dma = 0;
module_param_named(atapi_dma, ali_atapi_dma, int, 0644);
MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)");
+static struct pci_dev *isa_bridge;
+
/*
* Cable special cases
*/
@@ -401,52 +405,49 @@ static struct ata_port_operations ali_c5_port_ops = {
static void ali_init_chipset(struct pci_dev *pdev)
{
u8 tmp;
- struct pci_dev *north, *isa_bridge;
+ struct pci_dev *north;
/*
* The chipset revision selects the driver operations and
* mode data.
*/
- if (pdev->revision >= 0x20 && pdev->revision < 0xC2) {
- /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
- pci_read_config_byte(pdev, 0x4B, &tmp);
- /* Clear CD-ROM DMA write bit */
- tmp &= 0x7F;
- pci_write_config_byte(pdev, 0x4B, tmp);
- } else if (pdev->revision >= 0xC2) {
- /* Enable cable detection logic */
+ if (pdev->revision <= 0x20) {
+ pci_read_config_byte(pdev, 0x53, &tmp);
+ tmp |= 0x03;
+ pci_write_config_byte(pdev, 0x53, tmp);
+ } else {
+ pci_read_config_byte(pdev, 0x4a, &tmp);
+ pci_write_config_byte(pdev, 0x4a, tmp | 0x20);
pci_read_config_byte(pdev, 0x4B, &tmp);
- pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
- }
- north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
- isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
-
- if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) {
- /* Configure the ALi bridge logic. For non ALi rely on BIOS.
- Set the south bridge enable bit */
- pci_read_config_byte(isa_bridge, 0x79, &tmp);
- if (pdev->revision == 0xC2)
- pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
- else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
- pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
- }
- if (pdev->revision >= 0x20) {
+ if (pdev->revision < 0xC2)
+ /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
+ /* Clear CD-ROM DMA write bit */
+ tmp &= 0x7F;
+ /* Cable and UDMA */
+ pci_write_config_byte(pdev, 0x4B, tmp | 0x09);
/*
* CD_ROM DMA on (0x53 bit 0). Enable this even if we want
* to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
* via 0x54/55.
*/
pci_read_config_byte(pdev, 0x53, &tmp);
- if (pdev->revision <= 0x20)
- tmp &= ~0x02;
if (pdev->revision >= 0xc7)
tmp |= 0x03;
else
tmp |= 0x01; /* CD_ROM enable for DMA */
pci_write_config_byte(pdev, 0x53, tmp);
}
- pci_dev_put(isa_bridge);
+ north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
+ if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) {
+ /* Configure the ALi bridge logic. For non ALi rely on BIOS.
+ Set the south bridge enable bit */
+ pci_read_config_byte(isa_bridge, 0x79, &tmp);
+ if (pdev->revision == 0xC2)
+ pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
+ else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
+ pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
+ }
pci_dev_put(north);
ata_pci_bmdma_clear_simplex(pdev);
}
@@ -516,7 +517,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
const struct ata_port_info *ppi[] = { NULL, NULL };
u8 tmp;
- struct pci_dev *isa_bridge;
int rc;
rc = pcim_enable_device(pdev);
@@ -543,14 +543,12 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
ali_init_chipset(pdev);
- isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
/* Are we paired with a UDMA capable chip */
pci_read_config_byte(isa_bridge, 0x5E, &tmp);
if ((tmp & 0x1E) == 0x12)
ppi[0] = &info_20_udma;
}
- pci_dev_put(isa_bridge);
return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL);
}
@@ -590,13 +588,20 @@ static struct pci_driver ali_pci_driver = {
static int __init ali_init(void)
{
- return pci_register_driver(&ali_pci_driver);
+ int ret;
+ isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
+
+ ret = pci_register_driver(&ali_pci_driver);
+ if (ret < 0)
+ pci_dev_put(isa_bridge);
+ return ret;
}
static void __exit ali_exit(void)
{
pci_unregister_driver(&ali_pci_driver);
+ pci_dev_put(isa_bridge);
}