diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2018-06-05 17:01:41 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-06-05 17:01:41 -0700 |
commit | 0bbddb8cbe7a8765e9c6ef598a33b50461934f88 (patch) | |
tree | 85e13aaa6950b2636a9405bcb401cf809af285a0 /drivers/ata/libata-eh.c | |
parent | 476d9ff653b3b2d7f3140c56da771f2b4a3d1c0a (diff) | |
parent | 88e10092f6a623b88808f782b6637162b5b658fb (diff) | |
download | linux-0bbddb8cbe7a8765e9c6ef598a33b50461934f88.tar.bz2 |
Merge branch 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:
- libata has always been limiting the maximum queue depth to 31, with
one entry set aside mostly for historical reasons. This didn't use to
make much difference but Jens found out that modern hard drives can
actually perform measurably better with the extra one queue depth.
Jens updated libata core so that it can make use of full 32 queue
depth
- Damien updated command retry logic in error handling so that it
doesn't unnecessarily retry when upper layer (SCSI) is gonna handle
them
- A couple misc changes
* 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
sata_fsl: use the right type for tag bitshift
ahci: enable full queue depth of 32
libata: don't clamp queue depth to ATA_MAX_QUEUE - 1
libata: add extra internal command
sata_nv: set host can_queue count appropriately
libata: remove assumption that ATA_MAX_QUEUE - 1 is the max
libata: use ata_tag_internal() consistently
libata: bump ->qc_active to a 64-bit type
libata: convert core and drivers to ->hw_tag usage
libata: introduce notion of separate hardware tags
libata: Fix command retry decision
libata: Honor RQF_QUIET flag
libata: Make ata_dev_set_mode() less verbose
libata: Fix ata_err_string()
libata: Fix comment typo in ata_eh_analyze_tf()
sata_nv: don't use block layer bounce buffer
ata: hpt37x: Convert to use match_string() helper
Diffstat (limited to 'drivers/ata/libata-eh.c')
-rw-r--r-- | drivers/ata/libata-eh.c | 56 |
1 files changed, 46 insertions, 10 deletions
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index a2398e28c295..d5412145d76d 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -822,9 +822,12 @@ static int ata_eh_nr_in_flight(struct ata_port *ap) int nr = 0; /* count only non-internal commands */ - for (tag = 0; tag < ATA_MAX_QUEUE - 1; tag++) + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + if (ata_tag_internal(tag)) + continue; if (ata_qc_from_tag(ap, tag)) nr++; + } return nr; } @@ -849,7 +852,7 @@ void ata_eh_fastdrain_timerfn(struct timer_list *t) /* No progress during the last interval, tag all * in-flight qcs as timed out and freeze the port. */ - for (tag = 0; tag < ATA_MAX_QUEUE - 1; tag++) { + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag); if (qc) qc->err_mask |= AC_ERR_TIMEOUT; @@ -1003,7 +1006,8 @@ static int ata_do_link_abort(struct ata_port *ap, struct ata_link *link) /* we're gonna abort all commands, no need for fast drain */ ata_eh_set_pending(ap, 0); - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + /* include internal tag in iteration */ + for (tag = 0; tag <= ATA_MAX_QUEUE; tag++) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag); if (qc && (!link || qc->dev->link == link)) { @@ -1432,6 +1436,10 @@ static const char *ata_err_string(unsigned int err_mask) return "invalid argument"; if (err_mask & AC_ERR_DEV) return "device error"; + if (err_mask & AC_ERR_NCQ) + return "NCQ error"; + if (err_mask & AC_ERR_NODEV_HINT) + return "Polling detection error"; return "unknown error"; } @@ -1815,10 +1823,10 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, if (qc->flags & ATA_QCFLAG_SENSE_VALID) { int ret = scsi_check_sense(qc->scsicmd); /* - * SUCCESS here means that the sense code could + * SUCCESS here means that the sense code could be * evaluated and should be passed to the upper layers * for correct evaluation. - * FAILED means the sense code could not interpreted + * FAILED means the sense code could not be interpreted * and the device would need to be reset. * NEEDS_RETRY and ADD_TO_MLQUEUE means that the * command would need to be retried. @@ -2099,6 +2107,21 @@ static inline int ata_eh_worth_retry(struct ata_queued_cmd *qc) } /** + * ata_eh_quiet - check if we need to be quiet about a command error + * @qc: qc to check + * + * Look at the qc flags anbd its scsi command request flags to determine + * if we need to be quiet about the command failure. + */ +static inline bool ata_eh_quiet(struct ata_queued_cmd *qc) +{ + if (qc->scsicmd && + qc->scsicmd->request->rq_flags & RQF_QUIET) + qc->flags |= ATA_QCFLAG_QUIET; + return qc->flags & ATA_QCFLAG_QUIET; +} + +/** * ata_eh_link_autopsy - analyze error and determine recovery action * @link: host link to perform autopsy on * @@ -2115,7 +2138,7 @@ static void ata_eh_link_autopsy(struct ata_link *link) struct ata_eh_context *ehc = &link->eh_context; struct ata_device *dev; unsigned int all_err_mask = 0, eflags = 0; - int tag; + int tag, nr_failed = 0, nr_quiet = 0; u32 serror; int rc; @@ -2167,12 +2190,16 @@ static void ata_eh_link_autopsy(struct ata_link *link) if (qc->err_mask & ~AC_ERR_OTHER) qc->err_mask &= ~AC_ERR_OTHER; - /* SENSE_VALID trumps dev/unknown error and revalidation */ + /* + * SENSE_VALID trumps dev/unknown error and revalidation. Upper + * layers will determine whether the command is worth retrying + * based on the sense data and device class/type. Otherwise, + * determine directly if the command is worth retrying using its + * error mask and flags. + */ if (qc->flags & ATA_QCFLAG_SENSE_VALID) qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER); - - /* determine whether the command is worth retrying */ - if (ata_eh_worth_retry(qc)) + else if (ata_eh_worth_retry(qc)) qc->flags |= ATA_QCFLAG_RETRY; /* accumulate error info */ @@ -2181,8 +2208,17 @@ static void ata_eh_link_autopsy(struct ata_link *link) if (qc->flags & ATA_QCFLAG_IO) eflags |= ATA_EFLAG_IS_IO; trace_ata_eh_link_autopsy_qc(qc); + + /* Count quiet errors */ + if (ata_eh_quiet(qc)) + nr_quiet++; + nr_failed++; } + /* If all failed commands requested silence, then be quiet */ + if (nr_quiet == nr_failed) + ehc->i.flags |= ATA_EHI_QUIET; + /* enforce default EH actions */ if (ap->pflags & ATA_PFLAG_FROZEN || all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT)) |