summaryrefslogtreecommitdiffstats
path: root/drivers/ata/libata-core.c
diff options
context:
space:
mode:
authorDavid Howells <dhowells@redhat.com>2006-12-05 17:01:28 +0000
committerDavid Howells <dhowells@warthog.cambridge.redhat.com>2006-12-05 17:01:28 +0000
commit9db73724453a9350e1c22dbe732d427e2939a5c9 (patch)
tree15e3ead6413ae97398a54292acc199bee0864d42 /drivers/ata/libata-core.c
parent4c1ac1b49122b805adfa4efc620592f68dccf5db (diff)
parente62438630ca37539c8cc1553710bbfaa3cf960a7 (diff)
downloadlinux-9db73724453a9350e1c22dbe732d427e2939a5c9.tar.bz2
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts: drivers/ata/libata-scsi.c include/linux/libata.h Futher merge of Linus's head and compilation fixups. Signed-Off-By: David Howells <dhowells@redhat.com>
Diffstat (limited to 'drivers/ata/libata-core.c')
-rw-r--r--drivers/ata/libata-core.c536
1 files changed, 426 insertions, 110 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b5f2da6ac80e..8816e30fb7a4 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -199,7 +199,8 @@ static const u8 ata_rw_cmds[] = {
/**
* ata_rwcmd_protocol - set taskfile r/w commands and protocol
- * @qc: command to examine and configure
+ * @tf: command to examine and configure
+ * @dev: device tf belongs to
*
* Examine the device configuration and tf->flags to calculate
* the proper read/write commands and protocol to use.
@@ -207,10 +208,8 @@ static const u8 ata_rw_cmds[] = {
* LOCKING:
* caller.
*/
-int ata_rwcmd_protocol(struct ata_queued_cmd *qc)
+static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev)
{
- struct ata_taskfile *tf = &qc->tf;
- struct ata_device *dev = qc->dev;
u8 cmd;
int index, fua, lba48, write;
@@ -222,7 +221,7 @@ int ata_rwcmd_protocol(struct ata_queued_cmd *qc)
if (dev->flags & ATA_DFLAG_PIO) {
tf->protocol = ATA_PROT_PIO;
index = dev->multi_count ? 0 : 8;
- } else if (lba48 && (qc->ap->flags & ATA_FLAG_PIO_LBA48)) {
+ } else if (lba48 && (dev->ap->flags & ATA_FLAG_PIO_LBA48)) {
/* Unable to use DMA due to host limitation */
tf->protocol = ATA_PROT_PIO;
index = dev->multi_count ? 0 : 8;
@@ -240,6 +239,174 @@ int ata_rwcmd_protocol(struct ata_queued_cmd *qc)
}
/**
+ * ata_tf_read_block - Read block address from ATA taskfile
+ * @tf: ATA taskfile of interest
+ * @dev: ATA device @tf belongs to
+ *
+ * LOCKING:
+ * None.
+ *
+ * Read block address from @tf. This function can handle all
+ * three address formats - LBA, LBA48 and CHS. tf->protocol and
+ * flags select the address format to use.
+ *
+ * RETURNS:
+ * Block address read from @tf.
+ */
+u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
+{
+ u64 block = 0;
+
+ if (tf->flags & ATA_TFLAG_LBA) {
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ block |= (u64)tf->hob_lbah << 40;
+ block |= (u64)tf->hob_lbam << 32;
+ block |= tf->hob_lbal << 24;
+ } else
+ block |= (tf->device & 0xf) << 24;
+
+ block |= tf->lbah << 16;
+ block |= tf->lbam << 8;
+ block |= tf->lbal;
+ } else {
+ u32 cyl, head, sect;
+
+ cyl = tf->lbam | (tf->lbah << 8);
+ head = tf->device & 0xf;
+ sect = tf->lbal;
+
+ block = (cyl * dev->heads + head) * dev->sectors + sect;
+ }
+
+ return block;
+}
+
+/**
+ * ata_build_rw_tf - Build ATA taskfile for given read/write request
+ * @tf: Target ATA taskfile
+ * @dev: ATA device @tf belongs to
+ * @block: Block address
+ * @n_block: Number of blocks
+ * @tf_flags: RW/FUA etc...
+ * @tag: tag
+ *
+ * LOCKING:
+ * None.
+ *
+ * Build ATA taskfile @tf for read/write request described by
+ * @block, @n_block, @tf_flags and @tag on @dev.
+ *
+ * RETURNS:
+ *
+ * 0 on success, -ERANGE if the request is too large for @dev,
+ * -EINVAL if the request is invalid.
+ */
+int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
+ u64 block, u32 n_block, unsigned int tf_flags,
+ unsigned int tag)
+{
+ tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf->flags |= tf_flags;
+
+ if ((dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ_OFF |
+ ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ &&
+ likely(tag != ATA_TAG_INTERNAL)) {
+ /* yay, NCQ */
+ if (!lba_48_ok(block, n_block))
+ return -ERANGE;
+
+ tf->protocol = ATA_PROT_NCQ;
+ tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
+
+ if (tf->flags & ATA_TFLAG_WRITE)
+ tf->command = ATA_CMD_FPDMA_WRITE;
+ else
+ tf->command = ATA_CMD_FPDMA_READ;
+
+ tf->nsect = tag << 3;
+ tf->hob_feature = (n_block >> 8) & 0xff;
+ tf->feature = n_block & 0xff;
+
+ tf->hob_lbah = (block >> 40) & 0xff;
+ tf->hob_lbam = (block >> 32) & 0xff;
+ tf->hob_lbal = (block >> 24) & 0xff;
+ tf->lbah = (block >> 16) & 0xff;
+ tf->lbam = (block >> 8) & 0xff;
+ tf->lbal = block & 0xff;
+
+ tf->device = 1 << 6;
+ if (tf->flags & ATA_TFLAG_FUA)
+ tf->device |= 1 << 7;
+ } else if (dev->flags & ATA_DFLAG_LBA) {
+ tf->flags |= ATA_TFLAG_LBA;
+
+ if (lba_28_ok(block, n_block)) {
+ /* use LBA28 */
+ tf->device |= (block >> 24) & 0xf;
+ } else if (lba_48_ok(block, n_block)) {
+ if (!(dev->flags & ATA_DFLAG_LBA48))
+ return -ERANGE;
+
+ /* use LBA48 */
+ tf->flags |= ATA_TFLAG_LBA48;
+
+ tf->hob_nsect = (n_block >> 8) & 0xff;
+
+ tf->hob_lbah = (block >> 40) & 0xff;
+ tf->hob_lbam = (block >> 32) & 0xff;
+ tf->hob_lbal = (block >> 24) & 0xff;
+ } else
+ /* request too large even for LBA48 */
+ return -ERANGE;
+
+ if (unlikely(ata_rwcmd_protocol(tf, dev) < 0))
+ return -EINVAL;
+
+ tf->nsect = n_block & 0xff;
+
+ tf->lbah = (block >> 16) & 0xff;
+ tf->lbam = (block >> 8) & 0xff;
+ tf->lbal = block & 0xff;
+
+ tf->device |= ATA_LBA;
+ } else {
+ /* CHS */
+ u32 sect, head, cyl, track;
+
+ /* The request -may- be too large for CHS addressing. */
+ if (!lba_28_ok(block, n_block))
+ return -ERANGE;
+
+ if (unlikely(ata_rwcmd_protocol(tf, dev) < 0))
+ return -EINVAL;
+
+ /* Convert LBA to CHS */
+ track = (u32)block / dev->sectors;
+ cyl = track / dev->heads;
+ head = track % dev->heads;
+ sect = (u32)block % dev->sectors + 1;
+
+ DPRINTK("block %u track %u cyl %u head %u sect %u\n",
+ (u32)block, track, cyl, head, sect);
+
+ /* Check whether the converted CHS can fit.
+ Cylinder: 0-65535
+ Head: 0-15
+ Sector: 1-255*/
+ if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
+ return -ERANGE;
+
+ tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
+ tf->lbal = sect;
+ tf->lbam = cyl;
+ tf->lbah = cyl >> 8;
+ tf->device |= head;
+ }
+
+ return 0;
+}
+
+/**
* ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask
* @pio_mask: pio_mask
* @mwdma_mask: mwdma_mask
@@ -997,13 +1164,13 @@ void ata_qc_complete_internal(struct ata_queued_cmd *qc)
}
/**
- * ata_exec_internal - execute libata internal command
+ * ata_exec_internal_sg - execute libata internal command
* @dev: Device to which the command is sent
* @tf: Taskfile registers for the command and the result
* @cdb: CDB for packet command
* @dma_dir: Data tranfer direction of the command
- * @buf: Data buffer of the command
- * @buflen: Length of data buffer
+ * @sg: sg list for the data buffer of the command
+ * @n_elem: Number of sg entries
*
* Executes libata internal command with timeout. @tf contains
* command on entry and result on return. Timeout and error
@@ -1017,9 +1184,10 @@ void ata_qc_complete_internal(struct ata_queued_cmd *qc)
* RETURNS:
* Zero on success, AC_ERR_* mask on failure
*/
-unsigned ata_exec_internal(struct ata_device *dev,
- struct ata_taskfile *tf, const u8 *cdb,
- int dma_dir, void *buf, unsigned int buflen)
+unsigned ata_exec_internal_sg(struct ata_device *dev,
+ struct ata_taskfile *tf, const u8 *cdb,
+ int dma_dir, struct scatterlist *sg,
+ unsigned int n_elem)
{
struct ata_port *ap = dev->ap;
u8 command = tf->command;
@@ -1075,7 +1243,12 @@ unsigned ata_exec_internal(struct ata_device *dev,
qc->flags |= ATA_QCFLAG_RESULT_TF;
qc->dma_dir = dma_dir;
if (dma_dir != DMA_NONE) {
- ata_sg_init_one(qc, buf, buflen);
+ unsigned int i, buflen = 0;
+
+ for (i = 0; i < n_elem; i++)
+ buflen += sg[i].length;
+
+ ata_sg_init(qc, sg, n_elem);
qc->nsect = buflen / ATA_SECT_SIZE;
}
@@ -1159,6 +1332,35 @@ unsigned ata_exec_internal(struct ata_device *dev,
}
/**
+ * ata_exec_internal_sg - execute libata internal command
+ * @dev: Device to which the command is sent
+ * @tf: Taskfile registers for the command and the result
+ * @cdb: CDB for packet command
+ * @dma_dir: Data tranfer direction of the command
+ * @buf: Data buffer of the command
+ * @buflen: Length of data buffer
+ *
+ * Wrapper around ata_exec_internal_sg() which takes simple
+ * buffer instead of sg list.
+ *
+ * LOCKING:
+ * None. Should be called with kernel context, might sleep.
+ *
+ * RETURNS:
+ * Zero on success, AC_ERR_* mask on failure
+ */
+unsigned ata_exec_internal(struct ata_device *dev,
+ struct ata_taskfile *tf, const u8 *cdb,
+ int dma_dir, void *buf, unsigned int buflen)
+{
+ struct scatterlist sg;
+
+ sg_init_one(&sg, buf, buflen);
+
+ return ata_exec_internal_sg(dev, tf, cdb, dma_dir, &sg, 1);
+}
+
+/**
* ata_do_simple_cmd - execute simple internal command
* @dev: Device to which the command is sent
* @cmd: Opcode to execute
@@ -1222,7 +1424,7 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev)
* ata_dev_read_id - Read ID data from the specified device
* @dev: target device
* @p_class: pointer to class of the target device (may be changed)
- * @post_reset: is this read ID post-reset?
+ * @flags: ATA_READID_* flags
* @id: buffer to read IDENTIFY data into
*
* Read ID data from the specified device. ATA_CMD_ID_ATA is
@@ -1237,7 +1439,7 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev)
* 0 on success, -errno otherwise.
*/
int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
- int post_reset, u16 *id)
+ unsigned int flags, u16 *id)
{
struct ata_port *ap = dev->ap;
unsigned int class = *p_class;
@@ -1269,10 +1471,17 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
}
tf.protocol = ATA_PROT_PIO;
+ tf.flags |= ATA_TFLAG_POLLING; /* for polling presence detection */
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
id, sizeof(id[0]) * ATA_ID_WORDS);
if (err_mask) {
+ if (err_mask & AC_ERR_NODEV_HINT) {
+ DPRINTK("ata%u.%d: NODEV after polling detection\n",
+ ap->id, dev->devno);
+ return -ENOENT;
+ }
+
rc = -EIO;
reason = "I/O error";
goto err_out;
@@ -1292,7 +1501,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
goto err_out;
}
- if (post_reset && class == ATA_DEV_ATA) {
+ if ((flags & ATA_READID_POSTRESET) && class == ATA_DEV_ATA) {
/*
* The exact sequence expected by certain pre-ATA4 drives is:
* SRST RESET
@@ -1312,7 +1521,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
/* current CHS translation info (id[53-58]) might be
* changed. reread the identify device info.
*/
- post_reset = 0;
+ flags &= ~ATA_READID_POSTRESET;
goto retry;
}
}
@@ -1343,7 +1552,10 @@ static void ata_dev_config_ncq(struct ata_device *dev,
desc[0] = '\0';
return;
}
-
+ if (ata_device_blacklisted(dev) & ATA_HORKAGE_NONCQ) {
+ snprintf(desc, desc_sz, "NCQ (not used)");
+ return;
+ }
if (ap->flags & ATA_FLAG_NCQ) {
hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1);
dev->flags |= ATA_DFLAG_NCQ;
@@ -1372,7 +1584,6 @@ static void ata_set_port_max_cmd_len(struct ata_port *ap)
/**
* ata_dev_configure - Configure the specified ATA/ATAPI device
* @dev: Target device to configure
- * @print_info: Enable device info printout
*
* Configure @dev according to @dev->id. Generic and low-level
* driver specific fixups are also applied.
@@ -1383,9 +1594,10 @@ static void ata_set_port_max_cmd_len(struct ata_port *ap)
* RETURNS:
* 0 on success, -errno otherwise
*/
-int ata_dev_configure(struct ata_device *dev, int print_info)
+int ata_dev_configure(struct ata_device *dev)
{
struct ata_port *ap = dev->ap;
+ int print_info = ap->eh_context.i.flags & ATA_EHI_PRINTINFO;
const u16 *id = dev->id;
unsigned int xfer_mask;
char revbuf[7]; /* XYZ-99\0 */
@@ -1452,6 +1664,10 @@ int ata_dev_configure(struct ata_device *dev, int print_info)
if (ata_id_has_lba48(id)) {
dev->flags |= ATA_DFLAG_LBA48;
lba_desc = "LBA48";
+
+ if (dev->n_sectors >= (1UL << 28) &&
+ ata_id_has_flush_ext(id))
+ dev->flags |= ATA_DFLAG_FLUSH_EXT;
}
/* config NCQ */
@@ -1528,6 +1744,11 @@ int ata_dev_configure(struct ata_device *dev, int print_info)
cdb_intr_string);
}
+ /* determine max_sectors */
+ dev->max_sectors = ATA_MAX_SECTORS;
+ if (dev->flags & ATA_DFLAG_LBA48)
+ dev->max_sectors = ATA_MAX_SECTORS_LBA48;
+
if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) {
/* Let the user know. We don't want to disallow opens for
rescue purposes, or in case the vendor is just a blithering
@@ -1629,11 +1850,14 @@ int ata_bus_probe(struct ata_port *ap)
if (!ata_dev_enabled(dev))
continue;
- rc = ata_dev_read_id(dev, &dev->class, 1, dev->id);
+ rc = ata_dev_read_id(dev, &dev->class, ATA_READID_POSTRESET,
+ dev->id);
if (rc)
goto fail;
- rc = ata_dev_configure(dev, 1);
+ ap->eh_context.i.flags |= ATA_EHI_PRINTINFO;
+ rc = ata_dev_configure(dev);
+ ap->eh_context.i.flags &= ~ATA_EHI_PRINTINFO;
if (rc)
goto fail;
}
@@ -2151,6 +2375,7 @@ int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0)
static int ata_dev_set_mode(struct ata_device *dev)
{
+ struct ata_eh_context *ehc = &dev->ap->eh_context;
unsigned int err_mask;
int rc;
@@ -2165,7 +2390,9 @@ static int ata_dev_set_mode(struct ata_device *dev)
return -EIO;
}
+ ehc->i.flags |= ATA_EHI_POST_SETMODE;
rc = ata_dev_revalidate(dev, 0);
+ ehc->i.flags &= ~ATA_EHI_POST_SETMODE;
if (rc)
return rc;
@@ -2323,11 +2550,14 @@ static inline void ata_tf_to_host(struct ata_port *ap,
* Sleep until ATA Status register bit BSY clears,
* or a timeout occurs.
*
- * LOCKING: None.
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
*/
-
-unsigned int ata_busy_sleep (struct ata_port *ap,
- unsigned long tmout_pat, unsigned long tmout)
+int ata_busy_sleep(struct ata_port *ap,
+ unsigned long tmout_pat, unsigned long tmout)
{
unsigned long timer_start, timeout;
u8 status;
@@ -2335,27 +2565,32 @@ unsigned int ata_busy_sleep (struct ata_port *ap,
status = ata_busy_wait(ap, ATA_BUSY, 300);
timer_start = jiffies;
timeout = timer_start + tmout_pat;
- while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) {
+ while (status != 0xff && (status & ATA_BUSY) &&
+ time_before(jiffies, timeout)) {
msleep(50);
status = ata_busy_wait(ap, ATA_BUSY, 3);
}
- if (status & ATA_BUSY)
+ if (status != 0xff && (status & ATA_BUSY))
ata_port_printk(ap, KERN_WARNING,
"port is slow to respond, please be patient "
"(Status 0x%x)\n", status);
timeout = timer_start + tmout;
- while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) {
+ while (status != 0xff && (status & ATA_BUSY) &&
+ time_before(jiffies, timeout)) {
msleep(50);
status = ata_chk_status(ap);
}
+ if (status == 0xff)
+ return -ENODEV;
+
if (status & ATA_BUSY) {
ata_port_printk(ap, KERN_ERR, "port failed to respond "
"(%lu secs, Status 0x%x)\n",
tmout / HZ, status);
- return 1;
+ return -EBUSY;
}
return 0;
@@ -2446,10 +2681,8 @@ static unsigned int ata_bus_softreset(struct ata_port *ap,
* the bus shows 0xFF because the odd clown forgets the D7
* pulldown resistor.
*/
- if (ata_check_status(ap) == 0xFF) {
- ata_port_printk(ap, KERN_ERR, "SRST failed (status 0xFF)\n");
- return AC_ERR_OTHER;
- }
+ if (ata_check_status(ap) == 0xFF)
+ return 0;
ata_bus_post_reset(ap, devmask);
@@ -2775,9 +3008,9 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes)
}
/**
- * sata_std_hardreset - reset host port via SATA phy reset
+ * sata_port_hardreset - reset port via SATA phy reset
* @ap: port to reset
- * @class: resulting class of attached device
+ * @timing: timing parameters { interval, duratinon, timeout } in msec
*
* SATA phy-reset host port using DET bits of SControl register.
*
@@ -2787,10 +3020,8 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes)
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
+int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing)
{
- struct ata_eh_context *ehc = &ap->eh_context;
- const unsigned long *timing = sata_ehc_deb_timing(ehc);
u32 scontrol;
int rc;
@@ -2803,24 +3034,24 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
* and Sil3124.
*/
if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol)))
- return rc;
+ goto out;
scontrol = (scontrol & 0x0f0) | 0x304;
if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol)))
- return rc;
+ goto out;
sata_set_spd(ap);
}
/* issue phy wake/reset */
if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol)))
- return rc;
+ goto out;
scontrol = (scontrol & 0x0f0) | 0x301;
if ((rc = sata_scr_write_flush(ap, SCR_CONTROL, scontrol)))
- return rc;
+ goto out;
/* Couldn't find anything in SATA I/II specs, but AHCI-1.1
* 10.4.2 says at least 1 ms.
@@ -2828,7 +3059,40 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
msleep(1);
/* bring phy back */
- sata_phy_resume(ap, timing);
+ rc = sata_phy_resume(ap, timing);
+ out:
+ DPRINTK("EXIT, rc=%d\n", rc);
+ return rc;
+}
+
+/**
+ * sata_std_hardreset - reset host port via SATA phy reset
+ * @ap: port to reset
+ * @class: resulting class of attached device
+ *
+ * SATA phy-reset host port using DET bits of SControl register,
+ * wait for !BSY and classify the attached device.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
+{
+ const unsigned long *timing = sata_ehc_deb_timing(&ap->eh_context);
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ /* do hardreset */
+ rc = sata_port_hardreset(ap, timing);
+ if (rc) {
+ ata_port_printk(ap, KERN_ERR,
+ "COMRESET failed (errno=%d)\n", rc);
+ return rc;
+ }
/* TODO: phy layer with polling, timeouts, etc. */
if (ata_port_offline(ap)) {
@@ -2967,7 +3231,7 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
/**
* ata_dev_revalidate - Revalidate ATA device
* @dev: device to revalidate
- * @post_reset: is this revalidation after reset?
+ * @readid_flags: read ID flags
*
* Re-read IDENTIFY page and make sure @dev is still attached to
* the port.
@@ -2978,7 +3242,7 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
* RETURNS:
* 0 on success, negative errno otherwise
*/
-int ata_dev_revalidate(struct ata_device *dev, int post_reset)
+int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags)
{
unsigned int class = dev->class;
u16 *id = (void *)dev->ap->sector_buf;
@@ -2990,7 +3254,7 @@ int ata_dev_revalidate(struct ata_device *dev, int post_reset)
}
/* read ID data */
- rc = ata_dev_read_id(dev, &class, post_reset, id);
+ rc = ata_dev_read_id(dev, &class, readid_flags, id);
if (rc)
goto fail;
@@ -3003,7 +3267,7 @@ int ata_dev_revalidate(struct ata_device *dev, int post_reset)
memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS);
/* configure device according to the new ID */
- rc = ata_dev_configure(dev, 0);
+ rc = ata_dev_configure(dev);
if (rc == 0)
return 0;
@@ -3012,37 +3276,55 @@ int ata_dev_revalidate(struct ata_device *dev, int post_reset)
return rc;
}
-static const char * const ata_dma_blacklist [] = {
- "WDC AC11000H", NULL,
- "WDC AC22100H", NULL,
- "WDC AC32500H", NULL,
- "WDC AC33100H", NULL,
- "WDC AC31600H", NULL,
- "WDC AC32100H", "24.09P07",
- "WDC AC23200L", "21.10N21",
- "Compaq CRD-8241B", NULL,
- "CRD-8400B", NULL,
- "CRD-8480B", NULL,
- "CRD-8482B", NULL,
- "CRD-84", NULL,
- "SanDisk SDP3B", NULL,
- "SanDisk SDP3B-64", NULL,
- "SANYO CD-ROM CRD", NULL,
- "HITACHI CDR-8", NULL,
- "HITACHI CDR-8335", NULL,
- "HITACHI CDR-8435", NULL,
- "Toshiba CD-ROM XM-6202B", NULL,
- "TOSHIBA CD-ROM XM-1702BC", NULL,
- "CD-532E-A", NULL,
- "E-IDE CD-ROM CR-840", NULL,
- "CD-ROM Drive/F5A", NULL,
- "WPI CDD-820", NULL,
- "SAMSUNG CD-ROM SC-148C", NULL,
- "SAMSUNG CD-ROM SC", NULL,
- "SanDisk SDP3B-64", NULL,
- "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,
- "_NEC DV5800A", NULL,
- "SAMSUNG CD-ROM SN-124", "N001"
+struct ata_blacklist_entry {
+ const char *model_num;
+ const char *model_rev;
+ unsigned long horkage;
+};
+
+static const struct ata_blacklist_entry ata_device_blacklist [] = {
+ /* Devices with DMA related problems under Linux */
+ { "WDC AC11000H", NULL, ATA_HORKAGE_NODMA },
+ { "WDC AC22100H", NULL, ATA_HORKAGE_NODMA },
+ { "WDC AC32500H", NULL, ATA_HORKAGE_NODMA },
+ { "WDC AC33100H", NULL, ATA_HORKAGE_NODMA },
+ { "WDC AC31600H", NULL, ATA_HORKAGE_NODMA },
+ { "WDC AC32100H", "24.09P07", ATA_HORKAGE_NODMA },
+ { "WDC AC23200L", "21.10N21", ATA_HORKAGE_NODMA },
+ { "Compaq CRD-8241B", NULL, ATA_HORKAGE_NODMA },
+ { "CRD-8400B", NULL, ATA_HORKAGE_NODMA },
+ { "CRD-8480B", NULL, ATA_HORKAGE_NODMA },
+ { "CRD-8482B", NULL, ATA_HORKAGE_NODMA },
+ { "CRD-84", NULL, ATA_HORKAGE_NODMA },
+ { "SanDisk SDP3B", NULL, ATA_HORKAGE_NODMA },
+ { "SanDisk SDP3B-64", NULL, ATA_HORKAGE_NODMA },
+ { "SANYO CD-ROM CRD", NULL, ATA_HORKAGE_NODMA },
+ { "HITACHI CDR-8", NULL, ATA_HORKAGE_NODMA },
+ { "HITACHI CDR-8335", NULL, ATA_HORKAGE_NODMA },
+ { "HITACHI CDR-8435", NULL, ATA_HORKAGE_NODMA },
+ { "Toshiba CD-ROM XM-6202B", NULL, ATA_HORKAGE_NODMA },
+ { "TOSHIBA CD-ROM XM-1702BC", NULL, ATA_HORKAGE_NODMA },
+ { "CD-532E-A", NULL, ATA_HORKAGE_NODMA },
+ { "E-IDE CD-ROM CR-840",NULL, ATA_HORKAGE_NODMA },
+ { "CD-ROM Drive/F5A", NULL, ATA_HORKAGE_NODMA },
+ { "WPI CDD-820", NULL, ATA_HORKAGE_NODMA },
+ { "SAMSUNG CD-ROM SC-148C", NULL, ATA_HORKAGE_NODMA },
+ { "SAMSUNG CD-ROM SC", NULL, ATA_HORKAGE_NODMA },
+ { "SanDisk SDP3B-64", NULL, ATA_HORKAGE_NODMA },
+ { "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA },
+ { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA },
+ { "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA },
+
+ /* Devices we expect to fail diagnostics */
+
+ /* Devices where NCQ should be avoided */
+ /* NCQ is slow */
+ { "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ },
+
+ /* Devices with NCQ limits */
+
+ /* End Marker */
+ { }
};
static int ata_strim(char *s, size_t len)
@@ -3057,20 +3339,12 @@ static int ata_strim(char *s, size_t len)
return len;
}
-static int ata_dma_blacklisted(const struct ata_device *dev)
+unsigned long ata_device_blacklisted(const struct ata_device *dev)
{
unsigned char model_num[40];
unsigned char model_rev[16];
unsigned int nlen, rlen;
- int i;
-
- /* We don't support polling DMA.
- * DMA blacklist those ATAPI devices with CDB-intr (and use PIO)
- * if the LLDD handles only interrupts in the HSM_ST_LAST state.
- */
- if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) &&
- (dev->flags & ATA_DFLAG_CDB_INTR))
- return 1;
+ const struct ata_blacklist_entry *ad = ata_device_blacklist;
ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS,
sizeof(model_num));
@@ -3079,17 +3353,30 @@ static int ata_dma_blacklisted(const struct ata_device *dev)
nlen = ata_strim(model_num, sizeof(model_num));
rlen = ata_strim(model_rev, sizeof(model_rev));
- for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i += 2) {
- if (!strncmp(ata_dma_blacklist[i], model_num, nlen)) {
- if (ata_dma_blacklist[i+1] == NULL)
- return 1;
- if (!strncmp(ata_dma_blacklist[i], model_rev, rlen))
- return 1;
+ while (ad->model_num) {
+ if (!strncmp(ad->model_num, model_num, nlen)) {
+ if (ad->model_rev == NULL)
+ return ad->horkage;
+ if (!strncmp(ad->model_rev, model_rev, rlen))
+ return ad->horkage;
}
+ ad++;
}
return 0;
}
+static int ata_dma_blacklisted(const struct ata_device *dev)
+{
+ /* We don't support polling DMA.
+ * DMA blacklist those ATAPI devices with CDB-intr (and use PIO)
+ * if the LLDD handles only interrupts in the HSM_ST_LAST state.
+ */
+ if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) &&
+ (dev->flags & ATA_DFLAG_CDB_INTR))
+ return 1;
+ return (ata_device_blacklisted(dev) & ATA_HORKAGE_NODMA) ? 1 : 0;
+}
+
/**
* ata_dev_xfermask - Compute supported xfermask of the given device
* @dev: Device to compute xfermask for
@@ -3117,6 +3404,13 @@ static void ata_dev_xfermask(struct ata_device *dev)
*/
if (ap->cbl == ATA_CBL_PATA40)
xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
+ /* Apply drive side cable rule. Unknown or 80 pin cables reported
+ * host side are checked drive side as well. Cases where we know a
+ * 40wire cable is used safely for 80 are not checked here.
+ */
+ if (ata_drive_40wire(dev->id) && (ap->cbl == ATA_CBL_PATA_UNK || ap->cbl == ATA_CBL_PATA80))
+ xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
+
xfer_mask &= ata_pack_xfermask(dev->pio_mask,
dev->mwdma_mask, dev->udma_mask);
@@ -3234,8 +3528,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev,
* LOCKING:
* spin_lock_irqsave(host lock)
*/
-
-static void ata_sg_clean(struct ata_queued_cmd *qc)
+void ata_sg_clean(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct scatterlist *sg = qc->__sg;
@@ -3393,19 +3686,15 @@ void ata_noop_qc_prep(struct ata_queued_cmd *qc) { }
void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
{
- struct scatterlist *sg;
-
qc->flags |= ATA_QCFLAG_SINGLE;
- memset(&qc->sgent, 0, sizeof(qc->sgent));
qc->__sg = &qc->sgent;
qc->n_elem = 1;
qc->orig_n_elem = 1;
qc->buf_virt = buf;
qc->nbytes = buflen;
- sg = qc->__sg;
- sg_init_one(sg, buf, buflen);
+ sg_init_one(&qc->sgent, buf, buflen);
}
/**
@@ -4198,8 +4487,12 @@ fsm_start:
/* device stops HSM for abort/error */
qc->err_mask |= AC_ERR_DEV;
else
- /* HSM violation. Let EH handle this */
- qc->err_mask |= AC_ERR_HSM;
+ /* HSM violation. Let EH handle this.
+ * Phantom devices also trigger this
+ * condition. Mark hint.
+ */
+ qc->err_mask |= AC_ERR_HSM |
+ AC_ERR_NODEV_HINT;
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -4439,6 +4732,14 @@ void __ata_qc_complete(struct ata_queued_cmd *qc)
qc->complete_fn(qc);
}
+static void fill_result_tf(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ ap->ops->tf_read(ap, &qc->result_tf);
+ qc->result_tf.flags = qc->tf.flags;
+}
+
/**
* ata_qc_complete - Complete an active ATA command
* @qc: Command to complete
@@ -4476,7 +4777,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
if (!ata_tag_internal(qc->tag)) {
/* always fill result TF for failed qc */
- ap->ops->tf_read(ap, &qc->result_tf);
+ fill_result_tf(qc);
ata_qc_schedule_eh(qc);
return;
}
@@ -4484,7 +4785,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
/* read result TF if requested */
if (qc->flags & ATA_QCFLAG_RESULT_TF)
- ap->ops->tf_read(ap, &qc->result_tf);
+ fill_result_tf(qc);
__ata_qc_complete(qc);
} else {
@@ -4493,7 +4794,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
/* read result TF if failed or requested */
if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF)
- ap->ops->tf_read(ap, &qc->result_tf);
+ fill_result_tf(qc);
__ata_qc_complete(qc);
}
@@ -4673,6 +4974,14 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
}
}
+ /* Some controllers show flaky interrupt behavior after
+ * setting xfer mode. Use polling instead.
+ */
+ if (unlikely(qc->tf.command == ATA_CMD_SET_FEATURES &&
+ qc->tf.feature == SETFEATURES_XFER) &&
+ (ap->flags & ATA_FLAG_SETXFER_POLLING))
+ qc->tf.flags |= ATA_TFLAG_POLLING;
+
/* select the device */
ata_dev_select(ap, qc->dev->devno, 1, 0);
@@ -4781,6 +5090,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
inline unsigned int ata_host_intr (struct ata_port *ap,
struct ata_queued_cmd *qc)
{
+ struct ata_eh_info *ehi = &ap->eh_info;
u8 status, host_stat = 0;
VPRINTK("ata%u: protocol %d task_state %d\n",
@@ -4841,6 +5151,11 @@ inline unsigned int ata_host_intr (struct ata_port *ap,
ap->ops->irq_clear(ap);
ata_hsm_move(ap, qc, status, 0);
+
+ if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
+ qc->tf.protocol == ATA_PROT_ATAPI_DMA))
+ ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
+
return 1; /* irq handled */
idle_irq:
@@ -5047,7 +5362,7 @@ int ata_flush_cache(struct ata_device *dev)
if (!ata_try_flush_cache(dev))
return 0;
- if (ata_id_has_flush_ext(dev->id))
+ if (dev->flags & ATA_DFLAG_FLUSH_EXT)
cmd = ATA_CMD_FLUSH_EXT;
else
cmd = ATA_CMD_FLUSH;
@@ -5519,9 +5834,8 @@ int ata_device_add(const struct ata_probe_ent *ent)
ap->ioaddr.bmdma_addr,
irq_line);
- ata_chk_status(ap);
- host->ops->irq_clear(ap);
- ata_eh_freeze_port(ap); /* freeze port before requesting IRQ */
+ /* freeze port before requesting IRQ */
+ ata_eh_freeze_port(ap);
}
/* obtain irq, that may be shared between channels */
@@ -6119,6 +6433,7 @@ EXPORT_SYMBOL_GPL(__sata_phy_reset);
EXPORT_SYMBOL_GPL(ata_bus_reset);
EXPORT_SYMBOL_GPL(ata_std_prereset);
EXPORT_SYMBOL_GPL(ata_std_softreset);
+EXPORT_SYMBOL_GPL(sata_port_hardreset);
EXPORT_SYMBOL_GPL(sata_std_hardreset);
EXPORT_SYMBOL_GPL(ata_std_postreset);
EXPORT_SYMBOL_GPL(ata_dev_classify);
@@ -6145,6 +6460,7 @@ EXPORT_SYMBOL_GPL(ata_host_suspend);
EXPORT_SYMBOL_GPL(ata_host_resume);
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
+EXPORT_SYMBOL_GPL(ata_device_blacklisted);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);