ata: Convert dev_printk(KERN_<LEVEL> to dev_<level>(

Saves a bit of text as the call takes fewer args.

Coalesce a few formats.
Convert a few bare printks to pr_cont.

$ size drivers/ata/built-in.o*
   text	   data	    bss	    dec	    hex	filename
 558429	  73893	 117864	 750186	  b726a	drivers/ata/built-in.o.allyesconfig.new
 559574	  73893	 117888	 751355	  b76fb	drivers/ata/built-in.o.allyesconfig.old
 149567	  14689	   4220	 168476	  2921c	drivers/ata/built-in.o.defconfig.new
 149851	  14689	   4220	 168760	  29338	drivers/ata/built-in.o.defconfig.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

1 files changed, 20 insertions, 19 deletions

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 6f6e7718b05c..9842faac097f 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1225,8 +1225,9 @@ static int piix_pci_device_resume(struct pci_dev *pdev)
 		 */
 		rc = pci_reenable_device(pdev);
 		if (rc)
-			dev_printk(KERN_ERR, &pdev->dev, "failed to enable "
-				   "device after resume (%d)\n", rc);
+			dev_err(&pdev->dev,
+				"failed to enable device after resume (%d)\n",
+				rc);
 	} else
 		rc = ata_pci_device_do_resume(pdev);
 
@@ -1303,9 +1304,11 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev)
 			no_piix_dma = 2;
 	}
 	if (no_piix_dma)
-		dev_printk(KERN_WARNING, &ata_dev->dev, "450NX errata present, disabling IDE DMA.\n");
-	if (no_piix_dma == 2)
-		dev_printk(KERN_WARNING, &ata_dev->dev, "A BIOS update may resolve this.\n");
+		dev_warn(&ata_dev->dev,
+			 "450NX errata present, disabling IDE DMA%s\n",
+			 no_piix_dma == 2 ? " - a BIOS update may resolve this"
+			 : "");
+
 	return no_piix_dma;
 }
 
@@ -1338,37 +1341,36 @@ static const int *__devinit piix_init_sata_map(struct pci_dev *pdev,
 
 	map = map_db->map[map_value & map_db->mask];
 
-	dev_printk(KERN_INFO, &pdev->dev, "MAP [");
+	dev_info(&pdev->dev, "MAP [");
 	for (i = 0; i < 4; i++) {
 		switch (map[i]) {
 		case RV:
 			invalid_map = 1;
-			printk(" XX");
+			pr_cont(" XX");
 			break;
 
 		case NA:
-			printk(" --");
+			pr_cont(" --");
 			break;
 
 		case IDE:
 			WARN_ON((i & 1) || map[i + 1] != IDE);
 			pinfo[i / 2] = piix_port_info[ich_pata_100];
 			i++;
-			printk(" IDE IDE");
+			pr_cont(" IDE IDE");
 			break;
 
 		default:
-			printk(" P%d", map[i]);
+			pr_cont(" P%d", map[i]);
 			if (i & 1)
 				pinfo[i / 2].flags |= ATA_FLAG_SLAVE_POSS;
 			break;
 		}
 	}
-	printk(" ]\n");
+	pr_cont(" ]\n");
 
 	if (invalid_map)
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "invalid MAP value %u\n", map_value);
+		dev_err(&pdev->dev, "invalid MAP value %u\n", map_value);
 
 	return map;
 }
@@ -1398,8 +1400,8 @@ static bool piix_no_sidpr(struct ata_host *host)
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2920 &&
 	    pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
 	    pdev->subsystem_device == 0xb049) {
-		dev_printk(KERN_WARNING, host->dev,
-			   "Samsung DB-P70 detected, disabling SIDPR\n");
+		dev_warn(host->dev,
+			 "Samsung DB-P70 detected, disabling SIDPR\n");
 		return true;
 	}
 
@@ -1451,8 +1453,8 @@ static int __devinit piix_init_sidpr(struct ata_host *host)
 		piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol);
 
 		if ((scontrol & 0xf00) != 0x300) {
-			dev_printk(KERN_INFO, host->dev, "SCR access via "
-				   "SIDPR is available but doesn't work\n");
+			dev_info(host->dev,
+				 "SCR access via SIDPR is available but doesn't work\n");
 			return 0;
 		}
 	}
@@ -1501,8 +1503,7 @@ static void piix_iocfg_bit18_quirk(struct ata_host *host)
 	 * affected systems.
 	 */
 	if (hpriv->saved_iocfg & (1 << 18)) {
-		dev_printk(KERN_INFO, &pdev->dev,
-			   "applying IOCFG bit18 quirk\n");
+		dev_info(&pdev->dev, "applying IOCFG bit18 quirk\n");
 		pci_write_config_dword(pdev, PIIX_IOCFG,
 				       hpriv->saved_iocfg & ~(1 << 18));
 	}