diff options
author | Preetham Ramchandra <pchandru@nvidia.com> | 2018-03-12 17:10:33 +0530 |
---|---|---|
committer | Tejun Heo <tj@kernel.org> | 2018-03-14 08:24:20 -0700 |
commit | 56337b5576074ece867054b1ec231017a1a0a6b8 (patch) | |
tree | 89bf93fcab7ecb1c044f24976655fa10e4cba95c /drivers/ata/ahci_tegra.c | |
parent | 6431243f1506d1cd964a6c54d3d95e87a30f8a93 (diff) | |
download | linux-56337b5576074ece867054b1ec231017a1a0a6b8.tar.bz2 |
ata: ahci_tegra: Update initialization sequence
Update the controller initialization sequence and move Tegra124
specifics to tegra124_ahci_init.
Signed-off-by: Preetham Chandru R <pchandru@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Diffstat (limited to 'drivers/ata/ahci_tegra.c')
-rw-r--r-- | drivers/ata/ahci_tegra.c | 288 |
1 files changed, 224 insertions, 64 deletions
diff --git a/drivers/ata/ahci_tegra.c b/drivers/ata/ahci_tegra.c index 3a62eb246d80..055c65082a93 100644 --- a/drivers/ata/ahci_tegra.c +++ b/drivers/ata/ahci_tegra.c @@ -34,7 +34,8 @@ #define DRV_NAME "tegra-ahci" #define SATA_CONFIGURATION_0 0x180 -#define SATA_CONFIGURATION_EN_FPCI BIT(0) +#define SATA_CONFIGURATION_0_EN_FPCI BIT(0) +#define SATA_CONFIGURATION_0_CLK_OVERRIDE BIT(31) #define SCFG_OFFSET 0x1000 @@ -45,17 +46,55 @@ #define T_SATA0_CFG_1_SERR BIT(8) #define T_SATA0_CFG_9 0x24 -#define T_SATA0_CFG_9_BASE_ADDRESS_SHIFT 13 +#define T_SATA0_CFG_9_BASE_ADDRESS 0x40020000 #define SATA_FPCI_BAR5 0x94 -#define SATA_FPCI_BAR5_START_SHIFT 4 +#define SATA_FPCI_BAR5_START_MASK (0xfffffff << 4) +#define SATA_FPCI_BAR5_START (0x0040020 << 4) +#define SATA_FPCI_BAR5_ACCESS_TYPE (0x1) #define SATA_INTR_MASK 0x188 #define SATA_INTR_MASK_IP_INT_MASK BIT(16) +#define T_SATA0_CFG_35 0x94 +#define T_SATA0_CFG_35_IDP_INDEX_MASK (0x7ff << 2) +#define T_SATA0_CFG_35_IDP_INDEX (0x2a << 2) + +#define T_SATA0_AHCI_IDP1 0x98 +#define T_SATA0_AHCI_IDP1_DATA (0x400040) + +#define T_SATA0_CFG_PHY_1 0x12c +#define T_SATA0_CFG_PHY_1_PADS_IDDQ_EN BIT(23) +#define T_SATA0_CFG_PHY_1_PAD_PLL_IDDQ_EN BIT(22) + +#define T_SATA0_NVOOB 0x114 +#define T_SATA0_NVOOB_COMMA_CNT_MASK (0xff << 16) +#define T_SATA0_NVOOB_COMMA_CNT (0x07 << 16) +#define T_SATA0_NVOOB_SQUELCH_FILTER_MODE_MASK (0x3 << 24) +#define T_SATA0_NVOOB_SQUELCH_FILTER_MODE (0x1 << 24) +#define T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH_MASK (0x3 << 26) +#define T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH (0x3 << 26) + +#define T_SATA_CFG_PHY_0 0x120 +#define T_SATA_CFG_PHY_0_USE_7BIT_ALIGN_DET_FOR_SPD BIT(11) +#define T_SATA_CFG_PHY_0_MASK_SQUELCH BIT(24) + +#define T_SATA0_CFG2NVOOB_2 0x134 +#define T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW_MASK (0x1ff << 18) +#define T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW (0xc << 18) + #define T_SATA0_AHCI_HBA_CAP_BKDR 0x300 +#define T_SATA0_AHCI_HBA_CAP_BKDR_PARTIAL_ST_CAP BIT(13) +#define T_SATA0_AHCI_HBA_CAP_BKDR_SLUMBER_ST_CAP BIT(14) +#define T_SATA0_AHCI_HBA_CAP_BKDR_SALP BIT(26) +#define T_SATA0_AHCI_HBA_CAP_BKDR_SUPP_PM BIT(17) +#define T_SATA0_AHCI_HBA_CAP_BKDR_SNCQ BIT(30) #define T_SATA0_BKDOOR_CC 0x4a4 +#define T_SATA0_BKDOOR_CC_CLASS_CODE_MASK (0xffff << 16) +#define T_SATA0_BKDOOR_CC_CLASS_CODE (0x0106 << 16) +#define T_SATA0_BKDOOR_CC_PROG_IF_MASK (0xff << 8) +#define T_SATA0_BKDOOR_CC_PROG_IF (0x01 << 8) #define T_SATA0_CFG_SATA 0x54c #define T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN BIT(12) @@ -82,6 +121,27 @@ #define T_SATA0_CHX_PHY_CTRL11 0x6d0 #define T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ (0x2800 << 16) +#define T_SATA0_CHX_PHY_CTRL17_0 0x6e8 +#define T_SATA0_CHX_PHY_CTRL17_0_RX_EQ_CTRL_L_GEN1 0x55010000 +#define T_SATA0_CHX_PHY_CTRL18_0 0x6ec +#define T_SATA0_CHX_PHY_CTRL18_0_RX_EQ_CTRL_L_GEN2 0x55010000 +#define T_SATA0_CHX_PHY_CTRL20_0 0x6f4 +#define T_SATA0_CHX_PHY_CTRL20_0_RX_EQ_CTRL_H_GEN1 0x1 +#define T_SATA0_CHX_PHY_CTRL21_0 0x6f8 +#define T_SATA0_CHX_PHY_CTRL21_0_RX_EQ_CTRL_H_GEN2 0x1 + +/* AUX Registers */ +#define SATA_AUX_MISC_CNTL_1_0 0x8 +#define SATA_AUX_MISC_CNTL_1_0_DEVSLP_OVERRIDE BIT(17) +#define SATA_AUX_MISC_CNTL_1_0_SDS_SUPPORT BIT(13) +#define SATA_AUX_MISC_CNTL_1_0_DESO_SUPPORT BIT(15) + +#define SATA_AUX_RX_STAT_INT_0 0xc +#define SATA_AUX_RX_STAT_INT_0_SATA_DEVSLP BIT(7) + +#define SATA_AUX_SPARE_CFG0_0 0x18 +#define SATA_AUX_SPARE_CFG0_0_MDAT_TIMER_AFTER_PG_VALID BIT(14) + #define FUSE_SATA_CALIB 0x124 #define FUSE_SATA_CALIB_MASK 0x3 @@ -99,6 +159,14 @@ static const struct sata_pad_calibration tegra124_pad_calibration[] = { {0x14, 0x0e, 0x1a, 0x0e}, }; +struct tegra_ahci_ops { + int (*init)(struct ahci_host_priv *hpriv); +}; + +struct tegra_ahci_soc { + const struct tegra_ahci_ops *ops; +}; + struct tegra_ahci_priv { struct platform_device *pdev; void __iomem *sata_regs; @@ -108,8 +176,53 @@ struct tegra_ahci_priv { /* Needs special handling, cannot use ahci_platform */ struct clk *sata_clk; struct regulator_bulk_data supplies[5]; + const struct tegra_ahci_soc *soc; }; +static int tegra124_ahci_init(struct ahci_host_priv *hpriv) +{ + struct tegra_ahci_priv *tegra = hpriv->plat_data; + struct sata_pad_calibration calib; + int ret; + u32 val; + + /* Pad calibration */ + ret = tegra_fuse_readl(FUSE_SATA_CALIB, &val); + if (ret) + return ret; + + calib = tegra124_pad_calibration[val & FUSE_SATA_CALIB_MASK]; + + writel(BIT(0), tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX); + + val = readl(tegra->sata_regs + + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN1); + val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK; + val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK; + val |= calib.gen1_tx_amp << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT; + val |= calib.gen1_tx_peak << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT; + writel(val, tegra->sata_regs + SCFG_OFFSET + + T_SATA0_CHX_PHY_CTRL1_GEN1); + + val = readl(tegra->sata_regs + + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN2); + val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK; + val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK; + val |= calib.gen2_tx_amp << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT; + val |= calib.gen2_tx_peak << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT; + writel(val, tegra->sata_regs + SCFG_OFFSET + + T_SATA0_CHX_PHY_CTRL1_GEN2); + + writel(T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ, + tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL11); + writel(T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1, + tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL2); + + writel(0, tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX); + + return 0; +} + static int tegra_ahci_power_on(struct ahci_host_priv *hpriv) { struct tegra_ahci_priv *tegra = hpriv->plat_data; @@ -169,8 +282,7 @@ static int tegra_ahci_controller_init(struct ahci_host_priv *hpriv) { struct tegra_ahci_priv *tegra = hpriv->plat_data; int ret; - unsigned int val; - struct sata_pad_calibration calib; + u32 val; ret = tegra_ahci_power_on(hpriv); if (ret) { @@ -179,78 +291,114 @@ static int tegra_ahci_controller_init(struct ahci_host_priv *hpriv) return ret; } + /* + * Program the following SATA IPFS registers to allow SW accesses to + * SATA's MMIO register range. + */ + val = readl(tegra->sata_regs + SATA_FPCI_BAR5); + val &= ~(SATA_FPCI_BAR5_START_MASK | SATA_FPCI_BAR5_ACCESS_TYPE); + val |= SATA_FPCI_BAR5_START | SATA_FPCI_BAR5_ACCESS_TYPE; + writel(val, tegra->sata_regs + SATA_FPCI_BAR5); + + /* Program the following SATA IPFS register to enable the SATA */ val = readl(tegra->sata_regs + SATA_CONFIGURATION_0); - val |= SATA_CONFIGURATION_EN_FPCI; + val |= SATA_CONFIGURATION_0_EN_FPCI; writel(val, tegra->sata_regs + SATA_CONFIGURATION_0); - /* Pad calibration */ - - ret = tegra_fuse_readl(FUSE_SATA_CALIB, &val); - if (ret) { - dev_err(&tegra->pdev->dev, - "failed to read calibration fuse: %d\n", ret); - return ret; - } - - calib = tegra124_pad_calibration[val & FUSE_SATA_CALIB_MASK]; - - writel(BIT(0), tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX); - - val = readl(tegra->sata_regs + - SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN1); - val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK; - val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK; - val |= calib.gen1_tx_amp << - T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT; - val |= calib.gen1_tx_peak << - T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT; - writel(val, tegra->sata_regs + SCFG_OFFSET + - T_SATA0_CHX_PHY_CTRL1_GEN1); - - val = readl(tegra->sata_regs + - SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN2); - val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK; - val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK; - val |= calib.gen2_tx_amp << - T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT; - val |= calib.gen2_tx_peak << - T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT; - writel(val, tegra->sata_regs + SCFG_OFFSET + - T_SATA0_CHX_PHY_CTRL1_GEN2); - - writel(T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ, - tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL11); - writel(T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1, - tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL2); - - writel(0, tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX); - - /* Program controller device ID */ + /* Electrical settings for better link stability */ + val = T_SATA0_CHX_PHY_CTRL17_0_RX_EQ_CTRL_L_GEN1; + writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL17_0); + val = T_SATA0_CHX_PHY_CTRL18_0_RX_EQ_CTRL_L_GEN2; + writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL18_0); + val = T_SATA0_CHX_PHY_CTRL20_0_RX_EQ_CTRL_H_GEN1; + writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL20_0); + val = T_SATA0_CHX_PHY_CTRL21_0_RX_EQ_CTRL_H_GEN2; + writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL21_0); + + /* For SQUELCH Filter & Gen3 drive getting detected as Gen1 drive */ + + val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA_CFG_PHY_0); + val |= T_SATA_CFG_PHY_0_MASK_SQUELCH; + val &= ~T_SATA_CFG_PHY_0_USE_7BIT_ALIGN_DET_FOR_SPD; + writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA_CFG_PHY_0); + + val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_NVOOB); + val &= ~(T_SATA0_NVOOB_COMMA_CNT_MASK | + T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH_MASK | + T_SATA0_NVOOB_SQUELCH_FILTER_MODE_MASK); + val |= (T_SATA0_NVOOB_COMMA_CNT | + T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH | + T_SATA0_NVOOB_SQUELCH_FILTER_MODE); + writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_NVOOB); + + /* + * Change CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW from 83.3 ns to 58.8ns + */ + val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG2NVOOB_2); + val &= ~T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW_MASK; + val |= T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW; + writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG2NVOOB_2); + + if (tegra->soc->ops && tegra->soc->ops->init) + tegra->soc->ops->init(hpriv); + + /* + * Program the following SATA configuration registers to + * initialize SATA + */ + val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1); + val |= (T_SATA0_CFG_1_IO_SPACE | T_SATA0_CFG_1_MEMORY_SPACE | + T_SATA0_CFG_1_BUS_MASTER | T_SATA0_CFG_1_SERR); + writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1); + val = T_SATA0_CFG_9_BASE_ADDRESS; + writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_9); + /* Program Class Code and Programming interface for SATA */ val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA); val |= T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN; writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA); - writel(0x01060100, tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC); + val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC); + val &= + ~(T_SATA0_BKDOOR_CC_CLASS_CODE_MASK | + T_SATA0_BKDOOR_CC_PROG_IF_MASK); + val |= T_SATA0_BKDOOR_CC_CLASS_CODE | T_SATA0_BKDOOR_CC_PROG_IF; + writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC); val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA); val &= ~T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN; writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA); - /* Enable IO & memory access, bus master mode */ - - val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1); - val |= T_SATA0_CFG_1_IO_SPACE | T_SATA0_CFG_1_MEMORY_SPACE | - T_SATA0_CFG_1_BUS_MASTER | T_SATA0_CFG_1_SERR; - writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1); - - /* Program SATA MMIO */ - - writel(0x10000 << SATA_FPCI_BAR5_START_SHIFT, - tegra->sata_regs + SATA_FPCI_BAR5); + /* Enabling LPM capabilities through Backdoor Programming */ + val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_AHCI_HBA_CAP_BKDR); + val |= (T_SATA0_AHCI_HBA_CAP_BKDR_PARTIAL_ST_CAP | + T_SATA0_AHCI_HBA_CAP_BKDR_SLUMBER_ST_CAP | + T_SATA0_AHCI_HBA_CAP_BKDR_SALP | + T_SATA0_AHCI_HBA_CAP_BKDR_SUPP_PM); + writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_AHCI_HBA_CAP_BKDR); + + /* SATA Second Level Clock Gating configuration + * Enabling Gating of Tx/Rx clocks and driving Pad IDDQ and Lane + * IDDQ Signals + */ + val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_35); + val &= ~T_SATA0_CFG_35_IDP_INDEX_MASK; + val |= T_SATA0_CFG_35_IDP_INDEX; + writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_35); + + val = T_SATA0_AHCI_IDP1_DATA; + writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_AHCI_IDP1); + + val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_PHY_1); + val |= (T_SATA0_CFG_PHY_1_PADS_IDDQ_EN | + T_SATA0_CFG_PHY_1_PAD_PLL_IDDQ_EN); + writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_PHY_1); + + /* Enabling IPFS Clock Gating */ + val = readl(tegra->sata_regs + SATA_CONFIGURATION_0); + val &= ~SATA_CONFIGURATION_0_CLK_OVERRIDE; + writel(val, tegra->sata_regs + SATA_CONFIGURATION_0); - writel(0x08000 << T_SATA0_CFG_9_BASE_ADDRESS_SHIFT, - tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_9); /* Unmask SATA interrupts */ @@ -285,8 +433,19 @@ static const struct ata_port_info ahci_tegra_port_info = { .port_ops = &ahci_tegra_port_ops, }; +static const struct tegra_ahci_ops tegra124_ahci_ops = { + .init = tegra124_ahci_init, +}; + +static const struct tegra_ahci_soc tegra124_ahci_soc = { + .ops = &tegra124_ahci_ops, +}; + static const struct of_device_id tegra_ahci_of_match[] = { - { .compatible = "nvidia,tegra124-ahci" }, + { + .compatible = "nvidia,tegra124-ahci", + .data = &tegra124_ahci_soc + }, {} }; MODULE_DEVICE_TABLE(of, tegra_ahci_of_match); @@ -313,6 +472,7 @@ static int tegra_ahci_probe(struct platform_device *pdev) hpriv->plat_data = tegra; tegra->pdev = pdev; + tegra->soc = of_device_get_match_data(&pdev->dev); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); tegra->sata_regs = devm_ioremap_resource(&pdev->dev, res); |