summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>2014-01-16 09:10:31 +0100
committerJason Cooper <jason@lakedaemon.net>2014-01-16 16:31:26 +0000
commitf28d7de6bd4d41774744e011141945affa127da4 (patch)
tree6608781b5d4058e4de70eb9cce4e4d5ed8578034 /arch
parentf8b94beb7e6a374cb0de531b72377c49857b35ca (diff)
downloadlinux-f28d7de6bd4d41774744e011141945affa127da4.tar.bz2
ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER
DT-enabled Marvell Kirkwood and Dove SoCs make use of an irqchip driver. As expected for irqchip drivers, it uses a C-style interrupt handler and therefore selects MULTI_IRQ_HANDLER. Now, compiling a kernel with both non-DT and DT support enabled, selecting MULTI_IRQ_HANDLER will break ASM irq handler used by non-DT boards. Therefore, we provide a C-style irq handler even for non-DT boards, if MULTI_IRQ_HANDLER is set. By installing the C-style irq handler in orion_irq_init this is transparent to all non-DT board files. While the regression report was filed on Marvell Kirkwood, also Marvell Dove non-DT boards are affected and fixed by this patch. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Reported-by: Ian Campbell <ijc@hellion.org.uk> Cc: <stable@vger.kernel.org> # v3.12+ Fixes: 2326f04321a9 ("ARM: kirkwood: convert to DT irqchip and clocksource") Fixes: f07d73e33d0e ("ARM: dove: convert to DT irqchip and clocksource") Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/plat-orion/irq.c47
1 files changed, 47 insertions, 0 deletions
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index c492e1b3dfdb..807df142444b 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -15,8 +15,51 @@
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <asm/exception.h>
#include <plat/irq.h>
#include <plat/orion-gpio.h>
+#include <mach/bridge-regs.h>
+
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+/*
+ * Compiling with both non-DT and DT support enabled, will
+ * break asm irq handler used by non-DT boards. Therefore,
+ * we provide a C-style irq handler even for non-DT boards,
+ * if MULTI_IRQ_HANDLER is set.
+ *
+ * Notes:
+ * - this is prepared for Kirkwood and Dove only, update
+ * accordingly if you add Orion5x or MV78x00.
+ * - Orion5x uses different macro names and has only one
+ * set of CAUSE/MASK registers.
+ * - MV78x00 uses the same macro names but has a third
+ * set of CAUSE/MASK registers.
+ *
+ */
+
+static void __iomem *orion_irq_base = IRQ_VIRT_BASE;
+
+asmlinkage void
+__exception_irq_entry orion_legacy_handle_irq(struct pt_regs *regs)
+{
+ u32 stat;
+
+ stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_LOW_OFF);
+ stat &= readl_relaxed(orion_irq_base + IRQ_MASK_LOW_OFF);
+ if (stat) {
+ unsigned int hwirq = __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+ stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_HIGH_OFF);
+ stat &= readl_relaxed(orion_irq_base + IRQ_MASK_HIGH_OFF);
+ if (stat) {
+ unsigned int hwirq = 32 + __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+}
+#endif
void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
{
@@ -35,6 +78,10 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
ct->chip.irq_unmask = irq_gc_mask_set_bit;
irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE,
IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
+
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+ set_handle_irq(orion_legacy_handle_irq);
+#endif
}
#ifdef CONFIG_OF