summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-12-06 14:49:51 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2010-12-06 14:49:51 -0800
commit60658f8a293750b59a8a844bf5c387139af9500a (patch)
treebd3b2ededb09afec6c8a1bd59fee70bed96cbfdb /arch
parent771f8bc71c31c6bd103cdec283012253f352ab1c (diff)
parentf444a57ca10fa7c199f1daf1cebd1fd329004992 (diff)
downloadlinux-60658f8a293750b59a8a844bf5c387139af9500a.tar.bz2
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6524/1: GIC irq desciptor bug fix ARM: 6523/1: iop: ensure sched_clock() is notrace ARM: 6456/1: Fix for building DEBUG with sa11xx_base.c as a module. ARM: 6519/1: kuser: Fix incorrect cmpxchg syscall in kuser helpers ARM: 6505/1: kprobes: Don't HAVE_KPROBES when CONFIG_THUMB2_KERNEL is selected ARM: 6508/1: vexpress: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL ARM: 6507/1: RealView: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL ARM: 6504/1: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2. ARM: 6503/1: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL ARM: 6502/1: Thumb-2: Fix CONFIG_THUMB2_KERNEL breakage in compressed/head.S ARM: 6501/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in mm/proc-v7.S ARM: 6500/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in kernel/head.S ARM: 6499/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in bootp/init.S ARM: 6498/1: vfp: Correct data alignment for CONFIG_THUMB2_KERNEL ARM: 6497/1: kexec: Correct data alignment for CONFIG_THUMB2_KERNEL ARM: 6496/1: GIC: Do not try to register more then NR_IRQS interrupts ARM: cns3xxx: Fix build with CONFIG_PCI=y
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/boot/Makefile5
-rw-r--r--arch/arm/boot/bootp/init.S2
-rw-r--r--arch/arm/boot/compressed/head.S13
-rw-r--r--arch/arm/common/gic.c40
-rw-r--r--arch/arm/kernel/entry-armv.S2
-rw-r--r--arch/arm/kernel/head.S7
-rw-r--r--arch/arm/kernel/relocate_kernel.S2
-rw-r--r--arch/arm/mach-cns3xxx/pcie.c2
-rw-r--r--arch/arm/mach-realview/headsmp.S1
-rw-r--r--arch/arm/mach-vexpress/headsmp.S1
-rw-r--r--arch/arm/mm/proc-v7.S4
-rw-r--r--arch/arm/plat-iop/time.c3
-rw-r--r--arch/arm/vfp/vfphw.S1
14 files changed, 55 insertions, 30 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index db524e75c4a2..f1d9297b1050 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -9,7 +9,7 @@ config ARM
select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
- select HAVE_KPROBES if (!XIP_KERNEL)
+ select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 4a590f4113e2..4d26f2c52a75 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -70,12 +70,7 @@ else
$(obj)/uImage: LOADADDR=$(ZRELADDR)
endif
-ifeq ($(CONFIG_THUMB2_KERNEL),y)
-# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
-$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
-else
$(obj)/uImage: STARTADDR=$(LOADADDR)
-endif
$(obj)/uImage: $(obj)/zImage FORCE
$(call if_changed,uimage)
diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S
index 8b0de41c3dcb..78b508075161 100644
--- a/arch/arm/boot/bootp/init.S
+++ b/arch/arm/boot/bootp/init.S
@@ -73,6 +73,8 @@ move: ldmia r4!, {r7 - r10} @ move 32-bytes at a time
.size _start, . - _start
+ .align
+
.type data,#object
data: .word initrd_start @ source initrd address
.word initrd_phys @ destination initrd address
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 9be21ba648cd..7193884ed8b0 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -125,9 +125,13 @@ wait: mrc p14, 0, pc, c0, c1, 0
* sort out different calling conventions
*/
.align
+ .arm @ Always enter in ARM state
start:
.type start,#function
- .rept 8
+ THUMB( adr r12, BSYM(1f) )
+ THUMB( bx r12 )
+ THUMB( .rept 6 )
+ ARM( .rept 8 )
mov r0, r0
.endr
@@ -135,6 +139,7 @@ start:
.word 0x016f2818 @ Magic numbers to help the loader
.word start @ absolute load/run zImage address
.word _edata @ zImage end address
+ THUMB( .thumb )
1: mov r7, r1 @ save architecture ID
mov r8, r2 @ save atags pointer
@@ -174,7 +179,8 @@ not_angel:
ldr sp, [r0, #28]
#ifdef CONFIG_AUTO_ZRELADDR
@ determine final kernel image address
- and r4, pc, #0xf8000000
+ mov r4, pc
+ and r4, r4, #0xf8000000
add r4, r4, #TEXT_OFFSET
#else
ldr r4, =zreladdr
@@ -445,7 +451,8 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size
*/
mov r1, #0x1e
orr r1, r1, #3 << 10
- mov r2, pc, lsr #20
+ mov r2, pc
+ mov r2, r2, lsr #20
orr r1, r1, r2, lsl #20
add r0, r3, r2, lsl #2
str r1, [r0], #4
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 772f95f1aecd..e6388dcd8cfa 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -146,9 +146,15 @@ static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
unsigned int shift = (irq % 4) * 8;
unsigned int cpu = cpumask_first(mask_val);
u32 val;
+ struct irq_desc *desc;
spin_lock(&irq_controller_lock);
- irq_desc[irq].node = cpu;
+ desc = irq_to_desc(irq);
+ if (desc == NULL) {
+ spin_unlock(&irq_controller_lock);
+ return -EINVAL;
+ }
+ desc->node = cpu;
val = readl(reg) & ~(0xff << shift);
val |= 1 << (cpu + shift);
writel(val, reg);
@@ -210,7 +216,7 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
unsigned int irq_start)
{
- unsigned int max_irq, i;
+ unsigned int gic_irqs, irq_limit, i;
u32 cpumask = 1 << smp_processor_id();
if (gic_nr >= MAX_GIC_NR)
@@ -226,47 +232,49 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
/*
* Find out how many interrupts are supported.
- */
- max_irq = readl(base + GIC_DIST_CTR) & 0x1f;
- max_irq = (max_irq + 1) * 32;
-
- /*
* The GIC only supports up to 1020 interrupt sources.
- * Limit this to either the architected maximum, or the
- * platform maximum.
*/
- if (max_irq > max(1020, NR_IRQS))
- max_irq = max(1020, NR_IRQS);
+ gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f;
+ gic_irqs = (gic_irqs + 1) * 32;
+ if (gic_irqs > 1020)
+ gic_irqs = 1020;
/*
* Set all global interrupts to be level triggered, active low.
*/
- for (i = 32; i < max_irq; i += 16)
+ for (i = 32; i < gic_irqs; i += 16)
writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
/*
* Set all global interrupts to this CPU only.
*/
- for (i = 32; i < max_irq; i += 4)
+ for (i = 32; i < gic_irqs; i += 4)
writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
/*
* Set priority on all global interrupts.
*/
- for (i = 32; i < max_irq; i += 4)
+ for (i = 32; i < gic_irqs; i += 4)
writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
/*
* Disable all interrupts. Leave the PPI and SGIs alone
* as these enables are banked registers.
*/
- for (i = 32; i < max_irq; i += 32)
+ for (i = 32; i < gic_irqs; i += 32)
writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
/*
+ * Limit number of interrupts registered to the platform maximum
+ */
+ irq_limit = gic_data[gic_nr].irq_offset + gic_irqs;
+ if (WARN_ON(irq_limit > NR_IRQS))
+ irq_limit = NR_IRQS;
+
+ /*
* Setup the Linux IRQ subsystem.
*/
- for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
+ for (i = irq_start; i < irq_limit; i++) {
set_irq_chip(i, &gic_chip);
set_irq_chip_data(i, &gic_data[gic_nr]);
set_irq_handler(i, handle_level_irq);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index c09e3573c5de..bb96a7d4bbf5 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -911,7 +911,7 @@ __kuser_cmpxchg: @ 0xffff0fc0
* A special ghost syscall is used for that (see traps.c).
*/
stmfd sp!, {r7, lr}
- ldr r7, =1f @ it's 20 bits
+ ldr r7, 1f @ it's 20 bits
swi __ARM_NR_cmpxchg
ldmfd sp!, {r7, pc}
1: .word __ARM_NR_cmpxchg
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index dd6b369ac69c..6bd82d25683c 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -85,9 +85,11 @@ ENTRY(stext)
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor (r5=0)?
+ THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_p @ yes, error 'p'
bl __lookup_machine_type @ r5=machinfo
movs r8, r5 @ invalid machine (r5=0)?
+ THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_a @ yes, error 'a'
bl __vet_atags
#ifdef CONFIG_SMP_ON_UP
@@ -262,6 +264,7 @@ __create_page_tables:
mov pc, lr
ENDPROC(__create_page_tables)
.ltorg
+ .align
__enable_mmu_loc:
.long .
.long __enable_mmu
@@ -282,6 +285,7 @@ ENTRY(secondary_startup)
bl __lookup_processor_type
movs r10, r5 @ invalid processor?
moveq r0, #'p' @ yes, error 'p'
+ THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_p
/*
@@ -308,6 +312,8 @@ ENTRY(__secondary_switched)
b secondary_start_kernel
ENDPROC(__secondary_switched)
+ .align
+
.type __secondary_data, %object
__secondary_data:
.long .
@@ -413,6 +419,7 @@ __fixup_smp_on_up:
mov pc, lr
ENDPROC(__fixup_smp)
+ .align
1: .word .
.word __smpalt_begin
.word __smpalt_end
diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S
index fd26f8d65151..9cf4cbf8f95b 100644
--- a/arch/arm/kernel/relocate_kernel.S
+++ b/arch/arm/kernel/relocate_kernel.S
@@ -59,6 +59,8 @@ relocate_new_kernel:
ldr r2,kexec_boot_atags
mov pc,lr
+ .align
+
.globl kexec_start_address
kexec_start_address:
.long 0x0
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
index 38088c36936c..78defd71a829 100644
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ b/arch/arm/mach-cns3xxx/pcie.c
@@ -369,7 +369,7 @@ static int __init cns3xxx_pcie_init(void)
{
int i;
- hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS,
+ hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
"imprecise external abort");
for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
diff --git a/arch/arm/mach-realview/headsmp.S b/arch/arm/mach-realview/headsmp.S
index 4075473cf68a..b34be4554d40 100644
--- a/arch/arm/mach-realview/headsmp.S
+++ b/arch/arm/mach-realview/headsmp.S
@@ -35,5 +35,6 @@ pen: ldr r7, [r6]
*/
b secondary_startup
+ .align
1: .long .
.long pen_release
diff --git a/arch/arm/mach-vexpress/headsmp.S b/arch/arm/mach-vexpress/headsmp.S
index 8a78ff68e1ee..7a3f0632947c 100644
--- a/arch/arm/mach-vexpress/headsmp.S
+++ b/arch/arm/mach-vexpress/headsmp.S
@@ -35,5 +35,6 @@ pen: ldr r7, [r6]
*/
b secondary_startup
+ .align
1: .long .
.long pen_release
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 53cbe2225153..9b9ff5d949fd 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -381,7 +381,7 @@ __v7_ca9mp_proc_info:
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
- b __v7_ca9mp_setup
+ W(b) __v7_ca9mp_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
@@ -413,7 +413,7 @@ __v7_proc_info:
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
- b __v7_setup
+ W(b) __v7_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 85d3e55ca4a9..558cdfaf76b6 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -18,6 +18,7 @@
#include <linux/time.h>
#include <linux/init.h>
#include <linux/timex.h>
+#include <linux/sched.h>
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
@@ -36,7 +37,7 @@
/*
* IOP clocksource (free-running timer 1).
*/
-static cycle_t iop_clocksource_read(struct clocksource *unused)
+static cycle_t notrace iop_clocksource_read(struct clocksource *unused)
{
return 0xffffffffu - read_tcr1();
}
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index d66cead97d28..9897dcfc16d6 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -206,6 +206,7 @@ ENTRY(vfp_save_state)
mov pc, lr
ENDPROC(vfp_save_state)
+ .align
last_VFP_context_address:
.word last_VFP_context