summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-02-08 10:01:39 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2017-02-08 10:01:39 -0800
commit472ff5be61f9593ee2d3ebbd716768e14de4659d (patch)
treef49df37c99948503c5e7c754aa1f506899847c10 /arch
parentd3498fbaf386f9d540cdde7211ebb2d502b2b365 (diff)
parent5aff1d245e8cc1ab5c4517d916edaed9e3f7f973 (diff)
downloadlinux-472ff5be61f9593ee2d3ebbd716768e14de4659d.tar.bz2
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann: - A relatively large patch restores booting on i.MX platforms that failed to boot after a cleanup was merged for v4.10. - A quirk for USB needs to be enabled on the STi platform - On the Meson platform, we saw memory corruption with part of the memory used by the secure monitor, so we have to stay out of that area. - The same platform also has a problem with ethernet under load, which is fixed by disabling EEE negotiation. - imx6dl has an incorrect pin configuration, which prevents SPI from working. - Two maintainers have lost their access to their email addresses, so we should update the MAINTAINERS file before the release - Renaming one of the orion5x linkstation models to help simplify the debian install. - A couple of fixes for build warnings that were introduced during v4.10-rc. * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: defconfigs: make NF_CT_PROTO_SCTP and NF_CT_PROTO_UDPLITE built-in MAINTAINERS: socfpga: update email for Dinh Nguyen ARM: orion5x: fix Makefile for linkstation-lschl.dtb ARM: dts: orion5x-lschl: More consistent naming on linkstation series ARM: dts: orion5x-lschl: Fix model name MAINTAINERS: change email address from atmel to microchip MAINTAINERS: at91: change email address ARM64: dts: meson-gx: Add firmware reserved memory zones ARM64: dts: meson-gxbb-odroidc2: fix GbE tx link breakage ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk ARM: dts: imx: Pass 'chosen' and 'memory' nodes ARM: dts: imx6dl: fix GPIO4 range ARM: imx: hide unused variable in #ifdef
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/Makefile2
-rw-r--r--arch/arm/boot/dts/imx1.dtsi8
-rw-r--r--arch/arm/boot/dts/imx23.dtsi8
-rw-r--r--arch/arm/boot/dts/imx25.dtsi8
-rw-r--r--arch/arm/boot/dts/imx27.dtsi8
-rw-r--r--arch/arm/boot/dts/imx28.dtsi8
-rw-r--r--arch/arm/boot/dts/imx31.dtsi8
-rw-r--r--arch/arm/boot/dts/imx35.dtsi8
-rw-r--r--arch/arm/boot/dts/imx50.dtsi8
-rw-r--r--arch/arm/boot/dts/imx51.dtsi8
-rw-r--r--arch/arm/boot/dts/imx53.dtsi8
-rw-r--r--arch/arm/boot/dts/imx6dl.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl.dtsi8
-rw-r--r--arch/arm/boot/dts/imx6sl.dtsi8
-rw-r--r--arch/arm/boot/dts/imx6sx.dtsi8
-rw-r--r--arch/arm/boot/dts/imx6ul.dtsi8
-rw-r--r--arch/arm/boot/dts/imx7s.dtsi8
-rw-r--r--arch/arm/boot/dts/orion5x-linkstation-lschl.dts (renamed from arch/arm/boot/dts/orion5x-lschl.dts)4
-rw-r--r--arch/arm/boot/dts/stih407-family.dtsi1
-rw-r--r--arch/arm/configs/ezx_defconfig4
-rw-r--r--arch/arm/configs/imote2_defconfig4
-rw-r--r--arch/arm/mach-imx/mmdc.c2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gx.dtsi18
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts12
24 files changed, 160 insertions, 9 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f10fe8526239..01d178a2009f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -617,7 +617,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
orion5x-lacie-ethernet-disk-mini-v2.dtb \
orion5x-linkstation-lsgl.dtb \
orion5x-linkstation-lswtgl.dtb \
- orion5x-lschl.dtb \
+ orion5x-linkstation-lschl.dtb \
orion5x-lswsgl.dtb \
orion5x-maxtor-shared-storage-2.dtb \
orion5x-netgear-wnr854t.dtb \
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi
index b792eee3899b..2ee40bc9ec21 100644
--- a/arch/arm/boot/dts/imx1.dtsi
+++ b/arch/arm/boot/dts/imx1.dtsi
@@ -18,6 +18,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ * Also for U-Boot there must be a pre-existing /memory node.
+ */
+ chosen {};
+ memory { device_type = "memory"; reg = <0 0>; };
aliases {
gpio0 = &gpio1;
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index ac2a9da62b6c..43ccbbf754a3 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -16,6 +16,14 @@
#size-cells = <1>;
interrupt-parent = <&icoll>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ * Also for U-Boot there must be a pre-existing /memory node.
+ */
+ chosen {};
+ memory { device_type = "memory"; reg = <0 0>; };
aliases {
gpio0 = &gpio0;
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 831d09a28155..acd475659156 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -14,6 +14,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ * Also for U-Boot there must be a pre-existing /memory node.
+ */
+ chosen {};
+ memory { device_type = "memory"; reg = <0 0>; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 9d8b5969ee3b..b397384248f4 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -19,6 +19,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ * Also for U-Boot there must be a pre-existing /memory node.
+ */
+ chosen {};
+ memory { device_type = "memory"; reg = <0 0>; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 3aabf65a6a52..d6a2190b60ef 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -17,6 +17,14 @@
#size-cells = <1>;
interrupt-parent = <&icoll>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ * Also for U-Boot there must be a pre-existing /memory node.
+ */
+ chosen {};
+ memory { device_type = "memory"; reg = <0 0>; };
aliases {
ethernet0 = &mac0;
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index 85cd8be22f71..23b0d2cf9acd 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -12,6 +12,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ * Also for U-Boot there must be a pre-existing /memory node.
+ */
+ chosen {};
+ memory { device_type = "memory"; reg = <0 0>; };
aliases {
serial0 = &uart1;
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 9f40e6229189..d0496c65cea2 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -13,6 +13,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ * Also for U-Boot there must be a pre-existing /memory node.
+ */
+ chosen {};
+ memory { device_type = "memory"; reg = <0 0>; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index fe0221e4cbf7..ceae909e2201 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -17,6 +17,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ * Also for U-Boot there must be a pre-existing /memory node.
+ */
+ chosen {};
+ memory { device_type = "memory"; reg = <0 0>; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 33526cade735..1ee1d542d9ad 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -19,6 +19,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ * Also for U-Boot there must be a pre-existing /memory node.
+ */
+ chosen {};
+ memory { device_type = "memory"; reg = <0 0>; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index ca51dc03e327..2e516f4985e4 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -19,6 +19,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ * Also for U-Boot there must be a pre-existing /memory node.
+ */
+ chosen {};
+ memory { device_type = "memory"; reg = <0 0>; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 1ade1951e620..7aa120fbdc71 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -137,7 +137,7 @@
&gpio4 {
gpio-ranges = <&iomuxc 5 136 1>, <&iomuxc 6 145 1>, <&iomuxc 7 150 1>,
<&iomuxc 8 146 1>, <&iomuxc 9 151 1>, <&iomuxc 10 147 1>,
- <&iomuxc 11 151 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
+ <&iomuxc 11 152 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
<&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16 39 7>,
<&iomuxc 23 56 1>, <&iomuxc 24 61 7>, <&iomuxc 31 46 1>;
};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 89b834f3fa17..e7d30f45b161 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -16,6 +16,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ * Also for U-Boot there must be a pre-existing /memory node.
+ */
+ chosen {};
+ memory { device_type = "memory"; reg = <0 0>; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 19cbd879c448..cc9572ea2860 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -14,6 +14,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ * Also for U-Boot there must be a pre-existing /memory node.
+ */
+ chosen {};
+ memory { device_type = "memory"; reg = <0 0>; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 10f333016197..dd4ec85ecbaa 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -15,6 +15,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ * Also for U-Boot there must be a pre-existing /memory node.
+ */
+ chosen {};
+ memory { device_type = "memory"; reg = <0 0>; };
aliases {
can0 = &flexcan1;
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 39845a7e0463..53d3f8e41e9b 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -15,6 +15,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ * Also for U-Boot there must be a pre-existing /memory node.
+ */
+ chosen {};
+ memory { device_type = "memory"; reg = <0 0>; };
aliases {
ethernet0 = &fec1;
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 8ff2cbdd8f0d..be33dfc86838 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -50,6 +50,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ * Also for U-Boot there must be a pre-existing /memory node.
+ */
+ chosen {};
+ memory { device_type = "memory"; reg = <0 0>; };
aliases {
gpio0 = &gpio1;
diff --git a/arch/arm/boot/dts/orion5x-lschl.dts b/arch/arm/boot/dts/orion5x-linkstation-lschl.dts
index 947409252845..ea6c881634b9 100644
--- a/arch/arm/boot/dts/orion5x-lschl.dts
+++ b/arch/arm/boot/dts/orion5x-linkstation-lschl.dts
@@ -2,7 +2,7 @@
* Device Tree file for Buffalo Linkstation LS-CHLv3
*
* Copyright (C) 2016 Ash Hughes <ashley.hughes@blueyonder.co.uk>
- * Copyright (C) 2015, 2016
+ * Copyright (C) 2015-2017
* Roger Shimizu <rogershimizu@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
@@ -52,7 +52,7 @@
#include <dt-bindings/gpio/gpio.h>
/ {
- model = "Buffalo Linkstation Live v3 (LS-CHL)";
+ model = "Buffalo Linkstation LiveV3 (LS-CHL)";
compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x";
memory { /* 128 MB */
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index c8b2944e304a..ace97e8576db 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -680,6 +680,7 @@
phy-names = "usb2-phy", "usb3-phy";
phys = <&usb2_picophy0>,
<&phy_port2 PHY_TYPE_USB3>;
+ snps,dis_u3_susphy_quirk;
};
};
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index ea316c4b890e..d3f1768840e2 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -64,8 +64,8 @@ CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig
index 18e59feaa307..7f479cdb3479 100644
--- a/arch/arm/configs/imote2_defconfig
+++ b/arch/arm/configs/imote2_defconfig
@@ -56,8 +56,8 @@ CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
index 699157759120..c03bf28d8bbc 100644
--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@@ -60,7 +60,6 @@
#define to_mmdc_pmu(p) container_of(p, struct mmdc_pmu, pmu)
-static enum cpuhp_state cpuhp_mmdc_state;
static int ddr_type;
struct fsl_mmdc_devtype_data {
@@ -82,6 +81,7 @@ static const struct of_device_id imx_mmdc_dt_ids[] = {
#ifdef CONFIG_PERF_EVENTS
+static enum cpuhp_state cpuhp_mmdc_state;
static DEFINE_IDA(mmdc_ida);
PMU_EVENT_ATTR_STRING(total-cycles, mmdc_pmu_total_cycles, "event=0x00")
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index eada0b58ba1c..0cbe24b49710 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -55,6 +55,24 @@
#address-cells = <2>;
#size-cells = <2>;
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 16 MiB reserved for Hardware ROM Firmware */
+ hwrom_reserved: hwrom@0 {
+ reg = <0x0 0x0 0x0 0x1000000>;
+ no-map;
+ };
+
+ /* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+ secmon_reserved: secmon@10000000 {
+ reg = <0x0 0x10000000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
cpus {
#address-cells = <0x2>;
#size-cells = <0x0>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 5d28e1cdc998..c59403adb387 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -151,6 +151,18 @@
status = "okay";
pinctrl-0 = <&eth_rgmii_pins>;
pinctrl-names = "default";
+ phy-handle = <&eth_phy0>;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ reg = <0>;
+ eee-broken-1000t;
+ };
+ };
};
&ir {