diff options
author | Kishon Vijay Abraham I <kishon@ti.com> | 2020-04-17 12:13:40 +0530 |
---|---|---|
committer | Tony Lindgren <tony@atomide.com> | 2020-04-21 09:33:22 -0700 |
commit | 90d4d3f4ea45370d482fa609dbae4d2281b4074f (patch) | |
tree | 64d3b1fa877074d61821276d3260ad2652a84441 /arch | |
parent | b0bbc039d075d9d0ad91e49e2a634cc28fb1ccd5 (diff) | |
download | linux-90d4d3f4ea45370d482fa609dbae4d2281b4074f.tar.bz2 |
ARM: dts: dra7: Fix bus_dma_limit for PCIe
Even though commit cfb5d65f2595 ("ARM: dts: dra7: Add bus_dma_limit
for L3 bus") added bus_dma_limit for L3 bus, the PCIe controller
gets incorrect value of bus_dma_limit.
Fix it by adding empty dma-ranges property to axi@0 and axi@1
(parent device tree node of PCIe controller).
Cc: stable@kernel.org
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/boot/dts/dra7.dtsi | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 4740989ed9c4..7191ee6a1b82 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -172,6 +172,7 @@ #address-cells = <1>; ranges = <0x51000000 0x51000000 0x3000 0x0 0x20000000 0x10000000>; + dma-ranges; /** * To enable PCI endpoint mode, disable the pcie1_rc * node and enable pcie1_ep mode. @@ -185,7 +186,6 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x20013000 0x13000 0 0xffed000>; - dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; @@ -230,6 +230,7 @@ #address-cells = <1>; ranges = <0x51800000 0x51800000 0x3000 0x0 0x30000000 0x10000000>; + dma-ranges; status = "disabled"; pcie2_rc: pcie@51800000 { reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; @@ -240,7 +241,6 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x30013000 0x13000 0 0xffed000>; - dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; |