summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorRussell Currey <ruscur@russell.cc>2016-04-07 16:28:26 +1000
committerMichael Ellerman <mpe@ellerman.id.au>2016-05-30 13:50:04 +1000
commit871e178e0f2c4fa788f694721a10b4758d494ce1 (patch)
tree145f7bf6050855419da5b9402dbcfa6fdfaea3a3 /arch
parent1a695a905c18548062509178b98bc91e67510864 (diff)
downloadlinux-871e178e0f2c4fa788f694721a10b4758d494ce1.tar.bz2
powerpc/pseries/eeh: Handle RTAS delay requests in configure_bridge
In the "ibm,configure-pe" and "ibm,configure-bridge" RTAS calls, the spec states that values of 9900-9905 can be returned, indicating that software should delay for 10^x (where x is the last digit, i.e. 990x) milliseconds and attempt the call again. Currently, the kernel doesn't know about this, and respecting it fixes some PCI failures when the hypervisor is busy. The delay is capped at 0.2 seconds. Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Russell Currey <ruscur@russell.cc> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Diffstat (limited to 'arch')
-rw-r--r--arch/powerpc/platforms/pseries/eeh_pseries.c51
1 files changed, 36 insertions, 15 deletions
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index ac3ffd97e059..405baaf96864 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -615,29 +615,50 @@ static int pseries_eeh_configure_bridge(struct eeh_pe *pe)
{
int config_addr;
int ret;
+ /* Waiting 0.2s maximum before skipping configuration */
+ int max_wait = 200;
/* Figure out the PE address */
config_addr = pe->config_addr;
if (pe->addr)
config_addr = pe->addr;
- /* Use new configure-pe function, if supported */
- if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) {
- ret = rtas_call(ibm_configure_pe, 3, 1, NULL,
- config_addr, BUID_HI(pe->phb->buid),
- BUID_LO(pe->phb->buid));
- } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) {
- ret = rtas_call(ibm_configure_bridge, 3, 1, NULL,
- config_addr, BUID_HI(pe->phb->buid),
- BUID_LO(pe->phb->buid));
- } else {
- return -EFAULT;
- }
+ while (max_wait > 0) {
+ /* Use new configure-pe function, if supported */
+ if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) {
+ ret = rtas_call(ibm_configure_pe, 3, 1, NULL,
+ config_addr, BUID_HI(pe->phb->buid),
+ BUID_LO(pe->phb->buid));
+ } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) {
+ ret = rtas_call(ibm_configure_bridge, 3, 1, NULL,
+ config_addr, BUID_HI(pe->phb->buid),
+ BUID_LO(pe->phb->buid));
+ } else {
+ return -EFAULT;
+ }
- if (ret)
- pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n",
- __func__, pe->phb->global_number, pe->addr, ret);
+ if (!ret)
+ return ret;
+
+ /*
+ * If RTAS returns a delay value that's above 100ms, cut it
+ * down to 100ms in case firmware made a mistake. For more
+ * on how these delay values work see rtas_busy_delay_time
+ */
+ if (ret > RTAS_EXTENDED_DELAY_MIN+2 &&
+ ret <= RTAS_EXTENDED_DELAY_MAX)
+ ret = RTAS_EXTENDED_DELAY_MIN+2;
+
+ max_wait -= rtas_busy_delay_time(ret);
+
+ if (max_wait < 0)
+ break;
+
+ rtas_busy_delay(ret);
+ }
+ pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n",
+ __func__, pe->phb->global_number, pe->addr, ret);
return ret;
}