diff options
author | Madalin Bucur <madalin.bucur@oss.nxp.com> | 2020-03-16 14:05:57 +0200 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2020-03-16 14:58:32 -0700 |
commit | 4022d808c45277693ea86478fab1f081ebf997e8 (patch) | |
tree | 9d59e2a77545159a5f1484f10758b6b9ff1f4062 /arch | |
parent | 0fe1568061be372a908b408b93c2f64d1d95b6f6 (diff) | |
download | linux-4022d808c45277693ea86478fab1f081ebf997e8.tar.bz2 |
arm64: dts: ls1043a-rdb: correct RGMII delay mode to rgmii-id
The correct setting for the RGMII ports on LS1043ARDB is to
enable delay on both Rx and Tx so the interface mode used must
be PHY_INTERFACE_MODE_RGMII_ID.
Since commit 1b3047b5208a80 ("net: phy: realtek: add support for
configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver
has control over the RGMII RX delay and it is disabling it for
RGMII_TXID. The LS1043ARDB uses two such PHYs in RGMII_ID mode but
in the device tree the mode was described as "rgmii_txid".
This issue was not apparent at the time as the PHY driver took the
same action for RGMII_TXID and RGMII_ID back then but it became
visible (RX no longer working) after the above patch.
Changing the phy-connection-type to "rgmii-id" to address the issue.
Fixes: bf02f2ffe59c ("arm64: dts: add LS1043A DPAA FMan support")
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index 4223a2352d45..dde50c88f5e3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -119,12 +119,12 @@ ethernet@e4000 { phy-handle = <&rgmii_phy1>; - phy-connection-type = "rgmii-txid"; + phy-connection-type = "rgmii-id"; }; ethernet@e6000 { phy-handle = <&rgmii_phy2>; - phy-connection-type = "rgmii-txid"; + phy-connection-type = "rgmii-id"; }; ethernet@e8000 { |