summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-10-29 15:05:20 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-10-29 15:05:20 -0700
commit93335e5911dbffccd3b74c4d214268c0fd2bc1b0 (patch)
tree8b649f173e6bae3aafda31ed754349a284a3a667 /arch
parentc38239b4be1ac7e4bcf5bbd971353bae51525b8f (diff)
parentbe59a3282cf8e0c9c82e8835ffca98dfd2cd98e1 (diff)
downloadlinux-93335e5911dbffccd3b74c4d214268c0fd2bc1b0.tar.bz2
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree updates from Arnd Bergmann: "There are close to 800 indivudal changesets in this branch again, which feels like a lot. There are particularly many changes for the NVIDIA Tegra platform this time, in fact more than it has seen in the two years since the v4.9 merge window. Aside from this, it's been fairly normal, with lots of changes going into Renesas R-CAR, NXP i.MX, Allwinner Sunxi, Samsung Exynos, and TI OMAP. Most of the changes are for adding new features into existing boards, for brevity I'm only mentioning completely new machines and SoCs here. For the first time I think we have (slightly) more new 64-bit hardware than 32-bit: Two boards get added for TI OMAP: Moxa UC-2101 is an industrial computer, see https://www.moxa.com/product/UC-2100.htm; GTA04A5 is a minor variation of the motherboards of the GTA04 phone, see https://shop.goldelico.com/wiki.php?page=GTA04A5 Clearfog is a nice little board for quad-core Marvell Armada 8040 network processor, see https://www.solid-run.com/marvell-armada-family/clearfog-gt-8k/ Two additional server boards come with the Aspeed baseboard management controllers: Stardragon4800 is an arm64 reference platform made by HXT (based on Qualcomm's server chips), and TiogaPass is an Open Compute mainboard with x86 CPUs. Both use the ARM11 based AST2500 chips in the BMC. NXP i.MX usually sees a lot of new boards each release. This time there we only add one minor variant: ConnectCore 6UL SBC Pro uses the same SoM design as the ConnectCore 6UL SBC Express added later. However, there is a new chip, the i.MX6ULZ, which is an even smaller variant of the i.MX6ULL, with features removed. There is also support for the reference board design, the i.MX6ULZ 14x14 EVK. A new Raspberry Pi variant gets added, this one is the CM3 compute module based on bcm2837, it was launched in early 2017 but only now added to the kernel, both as 32-bit and as 64-bit files, as we tend to do for Raspberry Pi. On the Allwinner side, everything is again about cheap development boards, usually of the "Fruit Pi" variety. The new ones this time are: - Orange Pi Zero Plus2: http://www.orangepi.org/OrangePiZeroPlus2/ - Orange Pi One Plus: http://www.orangepi.org/OrangePiOneplus/ - Pine64 LTS: https://www.pine64.org/?product=pine-a64-lts - Banana Pi M2+ H5: http://www.banana-pi.org/m2plus.html The last one of these is now a 64-bit version of the earlier Banana Pi M2+ H3, with the same board layout. Similarly, for Rockchips, get get another variant of the 32-bit Asus Tinker board, the model 'S' based on rk3288, and three now boards based on the popular RK3399 chip: - ROC-RK3399-PC: https://libre.computer/products/boards/roc-rk3399-pc/ - Rock960: https://www.96boards.org/product/rock960/ - RockPro64: https://www.pine64.org/?page_id=61454 These are all quite powerful boards with lots of RAM and I/O, and the RK3399 is the same chip used in several Chromebooks. Finally, we get support for the PX30 (aka rk3326) chip, which is based on the low-end 64-bit Cortex-A35 CPU core. So far, only the evaluation board is supported. One more Banana Pi is added with a Mediatek chip: Banana Pi R64 is based on the MT7622 WiFi router platform, and the first product I've seen with a 64-bit Mediatek chip in that market: http://www.banana-pi.org/r64.html For HiSilicon, we gain support for the Hi3670 SoC and HiKey 370 development board, which are similar to the Hi3660 and Hikey 360 respectively, but add support for an NPU. Amlogic gets initial support for the Meson-G12A chip (S905D2), another quad-core Cortex-A53 SoC, and its evaluation platform. On the 32-bit side, we gain support for an actual end-user product, the Endless Computers Endless Mini based on Meson8b (S805), see https://endlessos.com/computers/ Qualcomm adds support for their MSM8998 SoC and evaluation platform. This chip is commonly known as the Snapdragon 835, and is used in high-end phones as well as low-end laptops. For Renesas, a very bare support for the r8a774a1 (RZ/G2M) is added, but no boards for this one. However, we do add boards for the previously added r8a77965 (R-Car M3-N): the M3NULCB Kingfisher and the M3NULCB Starter Kit Pro. While we have lots of DT changes for NVIDIA to update the existing files, the only board that gets added is the Toradex Colibri T20 on Colibri Evaluation Board for the old Tegra2. Synaptics add support for their AS370 SoC, which is part of the (formerly Marvell) Berlin line of set-top-box chips used e.g. in the various Google Chromecast. Only the .dtsi gets added at this point, no actual machines" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (721 commits) ARM: dts: socfgpa: remove ethernet aliases from dtsi arm64: dts: stratix10: add ethernet aliases dt-bindings: mediatek: Add bindig for MT7623 IOMMU and SMI dt-bindings: mediatek: Add JPEG Decoder binding for MT7623 dt-bindings: iommu: mediatek: Add binding for MT7623 dt-bindings: clock: mediatek: add support for MT7623 ARM: dts: mvebu: armada-385-db-88f6820-amc: auto-detect nand ECC properites ARM: dts: da850-lego-ev3: slow down A/DC as much as possible ARM: dts: da850-evm: Enable tca6416 on baseboard arm64: dts: uniphier: Add USB2 PHY nodes arm64: dts: uniphier: Add USB3 controller nodes ARM: dts: uniphier: Add USB2 PHY nodes ARM: dts: uniphier: Add USB3 controller nodes arm64: dts: meson-axg: s400: disable emmc arm64: dts: meson-axg: s400: add missing emmc pwrseq arm64: dts: clearfog-gt-8k: add PCIe slot description ARM: dts: at91: sama5d4_xplained: even nand memory partitions ARM: dts: at91: sama5d3_xplained: even nand memory partitions ARM: dts: at91: at91sam9x5cm: even nand memory partitions ARM: dts: at91: sama5d2_ptc_ek: fix bootloader env offsets ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/Makefile18
-rw-r--r--arch/arm/boot/dts/am335x-bone-common.dtsi6
-rw-r--r--arch/arm/boot/dts/am335x-boneblack-common.dtsi5
-rw-r--r--arch/arm/boot/dts/am335x-chiliboard.dts6
-rw-r--r--arch/arm/boot/dts/am335x-cm-t335.dts6
-rw-r--r--arch/arm/boot/dts/am335x-evm.dts12
-rw-r--r--arch/arm/boot/dts/am335x-evmsk.dts12
-rw-r--r--arch/arm/boot/dts/am335x-igep0033.dtsi13
-rw-r--r--arch/arm/boot/dts/am335x-lxm.dts12
-rw-r--r--arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi249
-rw-r--r--arch/arm/boot/dts/am335x-moxa-uc-2101.dts69
-rw-r--r--arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts12
-rw-r--r--arch/arm/boot/dts/am335x-nano.dts12
-rw-r--r--arch/arm/boot/dts/am335x-osd3358-sm-red.dts8
-rw-r--r--arch/arm/boot/dts/am335x-pdu001.dts14
-rw-r--r--arch/arm/boot/dts/am335x-pepper.dts12
-rw-r--r--arch/arm/boot/dts/am335x-sancloud-bbe.dts6
-rw-r--r--arch/arm/boot/dts/am335x-shc.dts1
-rw-r--r--arch/arm/boot/dts/am3517-evm-ui.dtsi220
-rw-r--r--arch/arm/boot/dts/am3517-evm.dts1
-rw-r--r--arch/arm/boot/dts/am4372.dtsi2
-rw-r--r--arch/arm/boot/dts/am437x-cm-t43.dts12
-rw-r--r--arch/arm/boot/dts/am437x-gp-evm.dts6
-rw-r--r--arch/arm/boot/dts/am437x-idk-evm.dts6
-rw-r--r--arch/arm/boot/dts/am437x-sk-evm.dts12
-rw-r--r--arch/arm/boot/dts/am43x-epos-evm.dts6
-rw-r--r--arch/arm/boot/dts/am571x-idk.dts84
-rw-r--r--arch/arm/boot/dts/am572x-idk-common.dtsi76
-rw-r--r--arch/arm/boot/dts/am572x-idk.dts4
-rw-r--r--arch/arm/boot/dts/am57xx-cl-som-am57x.dts14
-rw-r--r--arch/arm/boot/dts/am57xx-idk-common.dtsi18
-rw-r--r--arch/arm/boot/dts/arm-realview-eb.dtsi2
-rw-r--r--arch/arm/boot/dts/arm-realview-pb1176.dts2
-rw-r--r--arch/arm/boot/dts/arm-realview-pb11mp.dts2
-rw-r--r--arch/arm/boot/dts/arm-realview-pbx.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-385-db-88f6820-amc.dts155
-rw-r--r--arch/arm/boot/dts/armada-388-clearfog.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-xp-98dx3236.dtsi4
-rw-r--r--arch/arm/boot/dts/armada-xp-98dx3336.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-xp-98dx4251.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-xp-db-dxbc2.dts18
-rw-r--r--arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts18
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts207
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts146
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts47
-rw-r--r--arch/arm/boot/dts/aspeed-g4.dtsi2
-rw-r--r--arch/arm/boot/dts/aspeed-g5.dtsi2
-rw-r--r--arch/arm/boot/dts/at91-dvk_su60_somc.dtsi4
-rw-r--r--arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi4
-rw-r--r--arch/arm/boot/dts/at91-nattis-2-natte-2.dts103
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_som1_ek.dts42
-rw-r--r--arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts8
-rw-r--r--arch/arm/boot/dts/at91-sama5d2_xplained.dts30
-rw-r--r--arch/arm/boot/dts/at91-sama5d3_xplained.dts11
-rw-r--r--arch/arm/boot/dts/at91-sama5d4_xplained.dts13
-rw-r--r--arch/arm/boot/dts/at91-tse850-3.dts32
-rw-r--r--arch/arm/boot/dts/at91-vinco.dts2
-rw-r--r--arch/arm/boot/dts/at91sam9260ek.dts2
-rw-r--r--arch/arm/boot/dts/at91sam9261ek.dts2
-rw-r--r--arch/arm/boot/dts/at91sam9g20ek_common.dtsi2
-rw-r--r--arch/arm/boot/dts/at91sam9g45.dtsi2
-rw-r--r--arch/arm/boot/dts/at91sam9x5cm.dtsi18
-rw-r--r--arch/arm/boot/dts/bcm-hr2.dtsi2
-rw-r--r--arch/arm/boot/dts/bcm-nsp.dtsi33
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts87
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi52
-rw-r--r--arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi14
-rw-r--r--arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts28
-rw-r--r--arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts31
-rw-r--r--arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts28
-rw-r--r--arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi4
-rw-r--r--arch/arm/boot/dts/bcm5301x.dtsi5
-rw-r--r--arch/arm/boot/dts/bcm958625hr.dts26
-rw-r--r--arch/arm/boot/dts/da850-evm.dts6
-rw-r--r--arch/arm/boot/dts/da850-lego-ev3.dts3
-rw-r--r--arch/arm/boot/dts/dm8148-evm.dts14
-rw-r--r--arch/arm/boot/dts/dm8148-t410.dts14
-rw-r--r--arch/arm/boot/dts/dove-cubox.dts2
-rw-r--r--arch/arm/boot/dts/dove.dtsi6
-rw-r--r--arch/arm/boot/dts/dra62x-j5eco-evm.dts14
-rw-r--r--arch/arm/boot/dts/dra7-evm.dts14
-rw-r--r--arch/arm/boot/dts/dra7.dtsi6
-rw-r--r--arch/arm/boot/dts/dra71-evm.dts4
-rw-r--r--arch/arm/boot/dts/dra72-evm-revc.dts4
-rw-r--r--arch/arm/boot/dts/dra72-evm.dts8
-rw-r--r--arch/arm/boot/dts/dra76-evm.dts4
-rw-r--r--arch/arm/boot/dts/exynos3250-artik5.dtsi7
-rw-r--r--arch/arm/boot/dts/exynos4210-origen.dts9
-rw-r--r--arch/arm/boot/dts/exynos4210-trats.dts15
-rw-r--r--arch/arm/boot/dts/exynos4210-universal_c210.dts11
-rw-r--r--arch/arm/boot/dts/exynos4412-midas.dtsi3
-rw-r--r--arch/arm/boot/dts/exynos4412-odroid-common.dtsi3
-rw-r--r--arch/arm/boot/dts/exynos5250-arndale.dts102
-rw-r--r--arch/arm/boot/dts/exynos5250-pinctrl.dtsi11
-rw-r--r--arch/arm/boot/dts/exynos5250-snow-rev5.dts11
-rw-r--r--arch/arm/boot/dts/exynos5250.dtsi152
-rw-r--r--arch/arm/boot/dts/exynos5410-odroidxu.dts10
-rw-r--r--arch/arm/boot/dts/exynos5420-peach-pit.dts5
-rw-r--r--arch/arm/boot/dts/exynos5422-odroid-core.dtsi157
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi6
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3.dts6
-rw-r--r--arch/arm/boot/dts/exynos5800-peach-pi.dts5
-rw-r--r--arch/arm/boot/dts/hip04.dtsi346
-rw-r--r--arch/arm/boot/dts/imx1.dtsi4
-rw-r--r--arch/arm/boot/dts/imx23-evk.dts2
-rw-r--r--arch/arm/boot/dts/imx23-olinuxino.dts4
-rw-r--r--arch/arm/boot/dts/imx23-sansa.dts4
-rw-r--r--arch/arm/boot/dts/imx23-stmp378x_devb.dts2
-rw-r--r--arch/arm/boot/dts/imx23-xfi3.dts4
-rw-r--r--arch/arm/boot/dts/imx23.dtsi4
-rw-r--r--arch/arm/boot/dts/imx25.dtsi6
-rw-r--r--arch/arm/boot/dts/imx27.dtsi6
-rw-r--r--arch/arm/boot/dts/imx28-apf28dev.dts4
-rw-r--r--arch/arm/boot/dts/imx28-apx4devkit.dts4
-rw-r--r--arch/arm/boot/dts/imx28-cfa10036.dts2
-rw-r--r--arch/arm/boot/dts/imx28-duckbill-2-485.dts4
-rw-r--r--arch/arm/boot/dts/imx28-duckbill-2-enocean.dts4
-rw-r--r--arch/arm/boot/dts/imx28-duckbill-2-spi.dts4
-rw-r--r--arch/arm/boot/dts/imx28-duckbill-2.dts4
-rw-r--r--arch/arm/boot/dts/imx28-duckbill.dts4
-rw-r--r--arch/arm/boot/dts/imx28-evk.dts6
-rw-r--r--arch/arm/boot/dts/imx28-m28cu3.dts4
-rw-r--r--arch/arm/boot/dts/imx28-m28evk.dts4
-rw-r--r--arch/arm/boot/dts/imx28-sps1.dts4
-rw-r--r--arch/arm/boot/dts/imx28-ts4600.dts2
-rw-r--r--arch/arm/boot/dts/imx28.dtsi8
-rw-r--r--arch/arm/boot/dts/imx31.dtsi4
-rw-r--r--arch/arm/boot/dts/imx35.dtsi4
-rw-r--r--arch/arm/boot/dts/imx50.dtsi6
-rw-r--r--arch/arm/boot/dts/imx51-babbage.dts1
-rw-r--r--arch/arm/boot/dts/imx51-zii-rdu1.dts2
-rw-r--r--arch/arm/boot/dts/imx51-zii-scu2-mezz.dts8
-rw-r--r--arch/arm/boot/dts/imx51-zii-scu3-esb.dts4
-rw-r--r--arch/arm/boot/dts/imx51.dtsi8
-rw-r--r--arch/arm/boot/dts/imx53-ppd.dts1
-rw-r--r--arch/arm/boot/dts/imx53.dtsi6
-rw-r--r--arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts2
-rw-r--r--arch/arm/boot/dts/imx6dl-icore-mipi.dts2
-rw-r--r--arch/arm/boot/dts/imx6dl-icore-rqs.dts38
-rw-r--r--arch/arm/boot/dts/imx6dl-icore.dts38
-rw-r--r--arch/arm/boot/dts/imx6dl-riotboard.dts5
-rw-r--r--arch/arm/boot/dts/imx6q-apalis-eval.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-apalis-ixora.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-icore-mipi.dts6
-rw-r--r--arch/arm/boot/dts/imx6q-icore-ofcap10.dts38
-rw-r--r--arch/arm/boot/dts/imx6q-icore-ofcap12.dts38
-rw-r--r--arch/arm/boot/dts/imx6q-icore-rqs.dts39
-rw-r--r--arch/arm/boot/dts/imx6q-icore.dts38
-rw-r--r--arch/arm/boot/dts/imx6q.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-apalis.dtsi4
-rw-r--r--arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi34
-rw-r--r--arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi41
-rw-r--r--arch/arm/boot/dts/imx6qdl-icore.dtsi42
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabreauto.dtsi67
-rw-r--r--arch/arm/boot/dts/imx6qdl-wandboard.dtsi4
-rw-r--r--arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi4
-rw-r--r--arch/arm/boot/dts/imx6qdl.dtsi8
-rw-r--r--arch/arm/boot/dts/imx6sl.dtsi8
-rw-r--r--arch/arm/boot/dts/imx6sll.dtsi31
-rw-r--r--arch/arm/boot/dts/imx6sx-sdb.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6sx.dtsi14
-rw-r--r--arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts390
-rw-r--r--arch/arm/boot/dts/imx6ul-geam.dts40
-rw-r--r--arch/arm/boot/dts/imx6ul-isiot-emmc.dts61
-rw-r--r--arch/arm/boot/dts/imx6ul-isiot-nand.dts63
-rw-r--r--arch/arm/boot/dts/imx6ul-isiot.dtsi90
-rw-r--r--arch/arm/boot/dts/imx6ul.dtsi28
-rw-r--r--arch/arm/boot/dts/imx6ull-14x14-evk.dts2
-rw-r--r--arch/arm/boot/dts/imx6ull-pinfunc.h39
-rw-r--r--arch/arm/boot/dts/imx6ull.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6ulz-14x14-evk.dts20
-rw-r--r--arch/arm/boot/dts/imx6ulz.dtsi38
-rw-r--r--arch/arm/boot/dts/imx7d-sdb.dts2
-rw-r--r--arch/arm/boot/dts/imx7d.dtsi15
-rw-r--r--arch/arm/boot/dts/imx7s-warp.dts53
-rw-r--r--arch/arm/boot/dts/imx7s.dtsi131
-rw-r--r--arch/arm/boot/dts/imx7ulp-pinfunc.h16
-rw-r--r--arch/arm/boot/dts/iwg20d-q7-common.dtsi4
-rw-r--r--arch/arm/boot/dts/keystone-k2g.dtsi2
-rw-r--r--arch/arm/boot/dts/lpc32xx.dtsi4
-rw-r--r--arch/arm/boot/dts/ls1021a-qds.dts2
-rw-r--r--arch/arm/boot/dts/ls1021a-twr.dts2
-rw-r--r--arch/arm/boot/dts/ls1021a.dtsi12
-rw-r--r--arch/arm/boot/dts/meson8.dtsi2
-rw-r--r--arch/arm/boot/dts/meson8b-ec100.dts248
-rw-r--r--arch/arm/boot/dts/meson8b-odroidc1.dts109
-rw-r--r--arch/arm/boot/dts/meson8b.dtsi47
-rw-r--r--arch/arm/boot/dts/mt7623.dtsi124
-rw-r--r--arch/arm/boot/dts/omap2.dtsi4
-rw-r--r--arch/arm/boot/dts/omap2430.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3-beagle-xm.dts17
-rw-r--r--arch/arm/boot/dts/omap3-beagle.dts17
-rw-r--r--arch/arm/boot/dts/omap3-gta04.dtsi262
-rw-r--r--arch/arm/boot/dts/omap3-gta04a3.dts2
-rw-r--r--arch/arm/boot/dts/omap3-gta04a4.dts2
-rw-r--r--arch/arm/boot/dts/omap3-gta04a5.dts129
-rw-r--r--arch/arm/boot/dts/omap3-gta04a5one.dts114
-rw-r--r--arch/arm/boot/dts/omap3-n9.dts2
-rw-r--r--arch/arm/boot/dts/omap5-board-common.dtsi4
-rw-r--r--arch/arm/boot/dts/orion5x-linkstation.dtsi2
-rw-r--r--arch/arm/boot/dts/owl-s500-cubieboard6.dts3
-rw-r--r--arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts3
-rw-r--r--arch/arm/boot/dts/owl-s500-guitar.dtsi3
-rw-r--r--arch/arm/boot/dts/owl-s500.dtsi3
-rw-r--r--arch/arm/boot/dts/pxa25x.dtsi4
-rw-r--r--arch/arm/boot/dts/pxa27x.dtsi6
-rw-r--r--arch/arm/boot/dts/pxa2xx.dtsi27
-rw-r--r--arch/arm/boot/dts/qcom-apq8064.dtsi71
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019.dtsi143
-rw-r--r--arch/arm/boot/dts/qcom-ipq8064-ap148.dts83
-rw-r--r--arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi125
-rw-r--r--arch/arm/boot/dts/qcom-ipq8064.dtsi286
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts83
-rw-r--r--arch/arm/boot/dts/qcom-msm8974.dtsi198
-rw-r--r--arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts4
-rw-r--r--arch/arm/boot/dts/r8a7743-iwg20d-q7.dts4
-rw-r--r--arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts12
-rw-r--r--arch/arm/boot/dts/r8a77470.dtsi168
-rw-r--r--arch/arm/boot/dts/r8a7778-bockw.dts2
-rw-r--r--arch/arm/boot/dts/r8a7778.dtsi2
-rw-r--r--arch/arm/boot/dts/r8a7779-marzen.dts2
-rw-r--r--arch/arm/boot/dts/r8a7779.dtsi4
-rw-r--r--arch/arm/boot/dts/r8a7790-stout.dts4
-rw-r--r--arch/arm/boot/dts/r8a7790.dtsi6
-rw-r--r--arch/arm/boot/dts/r8a7791.dtsi6
-rw-r--r--arch/arm/boot/dts/r8a7792.dtsi3
-rw-r--r--arch/arm/boot/dts/r8a7793-gose.dts16
-rw-r--r--arch/arm/boot/dts/r8a7793.dtsi2
-rw-r--r--arch/arm/boot/dts/r8a7794-silk.dts25
-rw-r--r--arch/arm/boot/dts/r8a7794.dtsi3
-rw-r--r--arch/arm/boot/dts/r9a06g032.dtsi88
-rw-r--r--arch/arm/boot/dts/rk3036.dtsi2
-rw-r--r--arch/arm/boot/dts/rk3188-radxarock.dts8
-rw-r--r--arch/arm/boot/dts/rk3188.dtsi82
-rw-r--r--arch/arm/boot/dts/rk3288-tinker-s.dts26
-rw-r--r--arch/arm/boot/dts/rk3288-tinker.dts498
-rw-r--r--arch/arm/boot/dts/rk3288-tinker.dtsi502
-rw-r--r--arch/arm/boot/dts/s5pv210.dtsi2
-rw-r--r--arch/arm/boot/dts/sama5d2.dtsi123
-rw-r--r--arch/arm/boot/dts/sama5d4.dtsi8
-rw-r--r--arch/arm/boot/dts/socfpga.dtsi22
-rw-r--r--arch/arm/boot/dts/socfpga_arria10.dtsi32
-rw-r--r--arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts (renamed from arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts)2
-rw-r--r--arch/arm/boot/dts/socfpga_cyclone5_socrates.dts7
-rw-r--r--arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts3
-rw-r--r--arch/arm/boot/dts/ste-dbx5x0.dtsi80
-rw-r--r--arch/arm/boot/dts/ste-href-family-pinctrl.dtsi8
-rw-r--r--arch/arm/boot/dts/ste-href.dtsi1
-rw-r--r--arch/arm/boot/dts/ste-hrefprev60.dtsi2
-rw-r--r--arch/arm/boot/dts/ste-snowball.dts3
-rw-r--r--arch/arm/boot/dts/ste-u300.dts2
-rw-r--r--arch/arm/boot/dts/stih410-b2260.dts5
-rw-r--r--arch/arm/boot/dts/stihxxx-b2120.dtsi11
-rw-r--r--arch/arm/boot/dts/stm32429i-eval.dts3
-rw-r--r--arch/arm/boot/dts/stm32f429.dtsi2
-rw-r--r--arch/arm/boot/dts/stm32f469-disco.dts3
-rw-r--r--arch/arm/boot/dts/stm32f746-disco.dts3
-rw-r--r--arch/arm/boot/dts/stm32f769-disco.dts3
-rw-r--r--arch/arm/boot/dts/stm32h743.dtsi2
-rw-r--r--arch/arm/boot/dts/stm32mp157c-ev1.dts73
-rw-r--r--arch/arm/boot/dts/stm32mp157c.dtsi2
-rw-r--r--arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi3
-rw-r--r--arch/arm/boot/dts/sun5i.dtsi26
-rw-r--r--arch/arm/boot/dts/sun7i-a20.dtsi26
-rw-r--r--arch/arm/boot/dts/sun8i-a33.dtsi26
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts5
-rw-r--r--arch/arm/boot/dts/sun8i-a83t.dtsi18
-rw-r--r--arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts13
-rw-r--r--arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts190
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts140
-rw-r--r--arch/arm/boot/dts/sun8i-h3.dtsi25
-rw-r--r--arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts21
-rw-r--r--arch/arm/boot/dts/sun8i-r40.dtsi13
-rw-r--r--arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi3
-rw-r--r--arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts2
-rw-r--r--arch/arm/boot/dts/sun9i-a80.dtsi2
-rw-r--r--arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi31
-rw-r--r--arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi231
-rw-r--r--arch/arm/boot/dts/sunxi-h3-h5.dtsi2
-rw-r--r--arch/arm/boot/dts/tegra124-apalis-eval.dts40
-rw-r--r--arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts43
-rw-r--r--arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi452
-rw-r--r--arch/arm/boot/dts/tegra124-apalis.dtsi451
-rw-r--r--arch/arm/boot/dts/tegra20-colibri-eval-v3.dts262
-rw-r--r--arch/arm/boot/dts/tegra20-colibri-iris.dts200
-rw-r--r--arch/arm/boot/dts/tegra20-colibri.dtsi657
-rw-r--r--arch/arm/boot/dts/tegra20-paz00.dts12
-rw-r--r--arch/arm/boot/dts/tegra20.dtsi28
-rw-r--r--arch/arm/boot/dts/tegra30-apalis-eval.dts148
-rw-r--r--arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts266
-rw-r--r--arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi1189
-rw-r--r--arch/arm/boot/dts/tegra30-apalis.dtsi705
-rw-r--r--arch/arm/boot/dts/tegra30-colibri-eval-v3.dts130
-rw-r--r--arch/arm/boot/dts/tegra30-colibri.dtsi780
-rw-r--r--arch/arm/boot/dts/tegra30.dtsi10
-rw-r--r--arch/arm/boot/dts/uniphier-ld4-ref.dts4
-rw-r--r--arch/arm/boot/dts/uniphier-ld4.dtsi48
-rw-r--r--arch/arm/boot/dts/uniphier-ld6b-ref.dts12
-rw-r--r--arch/arm/boot/dts/uniphier-pinctrl.dtsi25
-rw-r--r--arch/arm/boot/dts/uniphier-pro4-ace.dts12
-rw-r--r--arch/arm/boot/dts/uniphier-pro4-ref.dts12
-rw-r--r--arch/arm/boot/dts/uniphier-pro4-sanji.dts12
-rw-r--r--arch/arm/boot/dts/uniphier-pro4.dtsi189
-rw-r--r--arch/arm/boot/dts/uniphier-pro5.dtsi59
-rw-r--r--arch/arm/boot/dts/uniphier-pxs2-gentil.dts12
-rw-r--r--arch/arm/boot/dts/uniphier-pxs2-vodka.dts8
-rw-r--r--arch/arm/boot/dts/uniphier-pxs2.dtsi239
-rw-r--r--arch/arm/boot/dts/uniphier-sld8-ref.dts4
-rw-r--r--arch/arm/boot/dts/uniphier-sld8.dtsi48
-rw-r--r--arch/arm/boot/dts/versatile-ab.dts2
-rw-r--r--arch/arm/boot/dts/vf500.dtsi43
-rw-r--r--arch/arm/boot/dts/vf610-twr.dts43
-rw-r--r--arch/arm/boot/dts/vf610-zii-cfu1.dts30
-rw-r--r--arch/arm/boot/dts/vf610-zii-dev-rev-c.dts44
-rw-r--r--arch/arm/boot/dts/vf610.dtsi44
-rw-r--r--arch/arm/boot/dts/vfxxx.dtsi55
-rw-r--r--arch/arm/boot/dts/zynq-zc702.dts12
-rw-r--r--arch/arm/boot/dts/zynq-zc770-xm010.dts2
-rw-r--r--arch/arm/boot/dts/zynq-zc770-xm013.dts2
-rw-r--r--arch/arm/mach-exynos/common.h1
-rw-r--r--arch/arm/mach-exynos/firmware.c14
-rw-r--r--arch/arm/mach-exynos/suspend.c34
-rw-r--r--arch/arm/mach-s3c24xx/mach-gta02.c42
-rw-r--r--arch/arm/mach-s3c24xx/mach-mini2440.c113
-rw-r--r--arch/arm64/boot/dts/actions/Makefile2
-rw-r--r--arch/arm64/boot/dts/actions/s700-cubieboard7.dts7
-rw-r--r--arch/arm64/boot/dts/actions/s700.dtsi21
-rw-r--r--arch/arm64/boot/dts/actions/s900-bubblegum-96.dts224
-rw-r--r--arch/arm64/boot/dts/actions/s900.dtsi118
-rw-r--r--arch/arm64/boot/dts/allwinner/Makefile4
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts2
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts30
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts85
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts99
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts175
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts13
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts28
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts9
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts28
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts2
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi193
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts11
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts11
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi43
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts150
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi23
-rw-r--r--arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi2
-rw-r--r--arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts5
-rw-r--r--arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi4
-rw-r--r--arch/arm64/boot/dts/amlogic/Makefile1
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-axg-s400.dts370
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-axg.dtsi1575
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts29
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12a.dtsi172
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gx.dtsi19
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl.dtsi2
-rw-r--r--arch/arm64/boot/dts/arm/juno-base.dtsi162
-rw-r--r--arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi52
-rw-r--r--arch/arm64/boot/dts/arm/juno.dts13
-rw-r--r--arch/arm64/boot/dts/broadcom/Makefile3
-rw-r--r--arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts2
-rw-r--r--arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi4
-rw-r--r--arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi2
-rw-r--r--arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi4
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi18
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi2
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts2
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts2
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi8
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts2
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts4
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi6
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi20
-rw-r--r--arch/arm64/boot/dts/hisilicon/Makefile1
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts35
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3670.dtsi162
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi181
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi6220.dtsi7
-rw-r--r--arch/arm64/boot/dts/lg/lg1312.dtsi4
-rw-r--r--arch/arm64/boot/dts/lg/lg1313.dtsi4
-rw-r--r--arch/arm64/boot/dts/marvell/Makefile1
-rw-r--r--arch/arm64/boot/dts/marvell/armada-372x.dtsi2
-rw-r--r--arch/arm64/boot/dts/marvell/armada-37xx.dtsi15
-rw-r--r--arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts441
-rw-r--r--arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi4
-rw-r--r--arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi12
-rw-r--r--arch/arm64/boot/dts/marvell/armada-ap806.dtsi110
-rw-r--r--arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi16
-rw-r--r--arch/arm64/boot/dts/marvell/armada-common.dtsi1
-rw-r--r--arch/arm64/boot/dts/marvell/armada-cp110.dtsi189
-rw-r--r--arch/arm64/boot/dts/mediatek/Makefile1
-rw-r--r--arch/arm64/boot/dts/mediatek/mt2712e.dtsi11
-rw-r--r--arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts530
-rw-r--r--arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts196
-rw-r--r--arch/arm64/boot/dts/mediatek/mt7622.dtsi62
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra186.dtsi76
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194.dtsi16
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi12
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi1
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210.dtsi57
-rw-r--r--arch/arm64/boot/dts/qcom/Makefile1
-rw-r--r--arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi14
-rw-r--r--arch/arm64/boot/dts/qcom/apq8096-db820c.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi14
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916.dtsi98
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996.dtsi15
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998-mtp.dts13
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi243
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998.dtsi690
-rw-r--r--arch/arm64/boot/dts/qcom/pm8916.dtsi18
-rw-r--r--arch/arm64/boot/dts/qcom/pm8994.dtsi18
-rw-r--r--arch/arm64/boot/dts/qcom/pm8998.dtsi75
-rw-r--r--arch/arm64/boot/dts/qcom/pmi8998.dtsi40
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-mtp.dts382
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845.dtsi300
-rw-r--r--arch/arm64/boot/dts/renesas/Makefile2
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774a1.dtsi1663
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts3
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi18
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts3
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts3
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts17
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7795.dtsi137
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts3
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts3
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7796.dtsi103
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts16
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts33
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts14
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77965.dtsi417
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts26
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77970.dtsi116
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77980-condor.dts123
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts134
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77980.dtsi677
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts272
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77990.dtsi681
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77995-draak.dts362
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77995.dtsi82
-rw-r--r--arch/arm64/boot/dts/renesas/salvator-common.dtsi9
-rw-r--r--arch/arm64/boot/dts/renesas/ulcb-kf.dtsi2
-rw-r--r--arch/arm64/boot/dts/renesas/ulcb.dtsi4
-rw-r--r--arch/arm64/boot/dts/rockchip/Makefile4
-rw-r--r--arch/arm64/boot/dts/rockchip/px30-evb.dts235
-rw-r--r--arch/arm64/boot/dts/rockchip/px30.dtsi2047
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts30
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328-rock64.dts61
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328.dtsi74
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-ficus.dts524
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-firefly.dts36
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts2
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts680
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rock960.dts52
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi542
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts692
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi68
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399.dtsi32
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi52
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts4
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts4
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi255
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts12
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi283
-rw-r--r--arch/arm64/boot/dts/synaptics/as370.dtsi173
-rw-r--r--arch/arm64/boot/dts/ti/k3-am65-main.dtsi51
-rw-r--r--arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi18
-rw-r--r--arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi46
-rw-r--r--arch/arm64/boot/dts/ti/k3-am65.dtsi54
-rw-r--r--arch/arm64/boot/dts/ti/k3-am654-base-board.dts5
472 files changed, 28653 insertions, 6209 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b5bd3de87c33..b0e966d625b9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2836-rpi-2-b.dtb \
bcm2837-rpi-3-b.dtb \
bcm2837-rpi-3-b-plus.dtb \
+ bcm2837-rpi-cm3-io3.dtb \
bcm2835-rpi-zero.dtb \
bcm2835-rpi-zero-w.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
@@ -321,6 +322,7 @@ dtb-$(CONFIG_MACH_MESON6) += \
meson6-atv1200.dtb
dtb-$(CONFIG_MACH_MESON8) += \
meson8-minix-neo-x8.dtb \
+ meson8b-ec100.dtb \
meson8b-mxq.dtb \
meson8b-odroidc1.dtb \
meson8m2-mxiii-plus.dtb
@@ -548,6 +550,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-14x14-evk.dtb \
imx6ul-ccimx6ulsbcexpress.dtb \
+ imx6ul-ccimx6ulsbcpro.dtb \
imx6ul-geam.dtb \
imx6ul-isiot-emmc.dtb \
imx6ul-isiot-nand.dtb \
@@ -559,7 +562,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-tx6ul-mainboard.dtb \
imx6ull-14x14-evk.dtb \
imx6ull-colibri-eval-v3.dtb \
- imx6ull-colibri-wifi-eval-v3.dtb
+ imx6ull-colibri-wifi-eval-v3.dtb \
+ imx6ulz-14x14-evk.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
imx7d-colibri-emmc-eval-v3.dtb \
@@ -649,6 +653,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
omap3-gta04a3.dtb \
omap3-gta04a4.dtb \
omap3-gta04a5.dtb \
+ omap3-gta04a5one.dtb \
omap3-ha.dtb \
omap3-ha-lcd.dtb \
omap3-igep0020.dtb \
@@ -706,6 +711,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-evmsk.dtb \
am335x-icev2.dtb \
am335x-lxm.dtb \
+ am335x-moxa-uc-2101.dtb \
am335x-moxa-uc-8100-me-t.dtb \
am335x-nano.dtb \
am335x-pdu001.dtb \
@@ -864,6 +870,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3288-r89.dtb \
rk3288-rock2-square.dtb \
rk3288-tinker.dtb \
+ rk3288-tinker-s.dtb \
rk3288-veyron-brain.dtb \
rk3288-veyron-jaq.dtb \
rk3288-veyron-jerry.dtb \
@@ -892,7 +899,7 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria10_socdk_sdmmc.dtb \
socfpga_cyclone5_mcvevk.dtb \
socfpga_cyclone5_socdk.dtb \
- socfpga_cyclone5_de0_sockit.dtb \
+ socfpga_cyclone5_de0_nano_soc.dtb \
socfpga_cyclone5_sockit.dtb \
socfpga_cyclone5_socrates.dtb \
socfpga_cyclone5_sodia.dtb \
@@ -1033,6 +1040,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-h2-plus-orangepi-r1.dtb \
sun8i-h2-plus-orangepi-zero.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
+ sun8i-h3-bananapi-m2-plus-v1.2.dtb \
sun8i-h3-beelink-x2.dtb \
sun8i-h3-libretech-all-h3-cc.dtb \
sun8i-h3-nanopi-m1.dtb \
@@ -1046,6 +1054,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-h3-orangepi-pc-plus.dtb \
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-orangepi-plus2e.dtb \
+ sun8i-h3-orangepi-zero-plus2.dtb \
sun8i-r16-bananapi-m2m.dtb \
sun8i-r16-nintendo-nes-classic.dtb \
sun8i-r16-nintendo-super-nes-classic.dtb \
@@ -1061,6 +1070,7 @@ dtb-$(CONFIG_ARCH_TANGO) += \
tango4-vantage-1172.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
tegra20-harmony.dtb \
+ tegra20-colibri-eval-v3.dtb \
tegra20-colibri-iris.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
@@ -1071,6 +1081,7 @@ dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
tegra20-ventana.dtb
dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
tegra30-apalis-eval.dtb \
+ tegra30-apalis-v1.1-eval.dtb \
tegra30-beaver.dtb \
tegra30-cardhu-a02.dtb \
tegra30-cardhu-a04.dtb \
@@ -1149,6 +1160,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb
dtb-$(CONFIG_MACH_ARMADA_38X) += \
+ armada-385-db-88f6820-amc.dtb \
armada-385-db-ap.dtb \
armada-385-linksys-caiman.dtb \
armada-385-linksys-cobra.dtb \
@@ -1199,6 +1211,8 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
aspeed-bmc-arm-centriq2400-rep.dtb \
+ aspeed-bmc-arm-stardragon4800-rep2.dtb \
+ aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-intel-s2600wf.dtb \
aspeed-bmc-opp-lanyang.dtb \
aspeed-bmc-opp-palmetto.dtb \
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 73b514dddf65..9e5e75ea87f5 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -379,7 +379,7 @@
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&ethphy0>;
phy-mode = "mii";
};
@@ -396,6 +396,10 @@
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&mmc1 {
diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
index 325daae40278..e543c2bee8c2 100644
--- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi
+++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
@@ -7,6 +7,7 @@
*/
#include <dt-bindings/display/tda998x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
&ldo3_reg {
regulator-min-microvolt = <1800000>;
@@ -88,9 +89,11 @@
};
&i2c0 {
- tda19988: tda19988 {
+ tda19988: tda19988@70 {
compatible = "nxp,tda998x";
reg = <0x70>;
+ nxp,calib-gpios = <&gpio1 25 0>;
+ interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default", "off";
pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
index 59431b235944..9c2a947aacf5 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -140,10 +140,14 @@
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&ethphy0>;
phy-mode = "rmii";
};
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index 947c81b7aaaf..c4d3e1f1a95e 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -486,10 +486,14 @@ status = "okay";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&ethphy0>;
phy-mode = "rgmii-txid";
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index c87d01297a01..98ec9c3e49ba 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -713,6 +713,7 @@
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
+ slaves = <1>;
};
&davinci_mdio {
@@ -720,15 +721,14 @@
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
-};
-&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
- phy-mode = "rgmii-txid";
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
-&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+&cpsw_emac0 {
+ phy-handle = <&ethphy0>;
phy-mode = "rgmii-txid";
};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index bf1a40e45c97..245868f58fe3 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -639,16 +639,24 @@
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&ethphy0>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <&ethphy1>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <2>;
};
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index a5769a8f5fc8..55b4c94cfafb 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -102,15 +102,24 @@
&davinci_mdio {
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&ethphy0>;
phy-mode = "rmii";
+
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <&ethphy1>;
phy-mode = "rmii";
};
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index 1d6c6fa703e4..481edcfaf121 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -317,13 +317,13 @@
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <5>;
+ phy-handle = <&ethphy0>;
phy-mode = "rmii";
dual_emac_res_vlan = <2>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <4>;
+ phy-handle = <&ethphy1>;
phy-mode = "rmii";
dual_emac_res_vlan = <3>;
};
@@ -345,6 +345,14 @@
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@5 {
+ reg = <5>;
+ };
+
+ ethphy1: ethernet-phy@4 {
+ reg = <4>;
+ };
};
&mmc1 {
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
new file mode 100644
index 000000000000..14f781953475
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
+ *
+ * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
+ * Wes Huang (黃淵河) <wes.huang@moxa.com>
+ * Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
+ */
+
+#include "am33xx.dtsi"
+
+/ {
+ vbat: vbat-regulator {
+ compatible = "regulator-fixed";
+ };
+
+ /* Power supply provides a fixed 3.3V @3A */
+ vmmcsd_fixed: vmmcsd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ buttons: push_button {
+ compatible = "gpio-keys";
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ push_button_pins: pinmux_push_button {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2_23 */
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ mmc1_pins_default: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ /* eMMC */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad12.mmc1_dat0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad13.mmc1_dat1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad14.mmc1_dat2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad15.mmc1_dat3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad8.mmc1_dat4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad9.mmc1_dat5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad10.mmc1_dat6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad11.mmc1_dat7 */
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ >;
+ };
+
+ spi0_pins: pinmux_spi0 {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+ AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ >;
+ };
+};
+
+&uart0 {
+ /* Console */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c16";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+
+ rtc_wdt: rtc_wdt@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+/* Power */
+&vbat {
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+};
+
+&mac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpsw_default>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&davinci_mdio_default>;
+ status = "okay";
+};
+
+&cpsw_emac0 {
+ status = "okay";
+};
+
+&cpsw_emac1 {
+ status = "okay";
+};
+
+&phy_sel {
+ reg= <0x44e10650 0xf5>;
+ rmii-clock-ext;
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&gpio0 {
+ ti,no-reset-on-init;
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ pinctrl-0 = <&mmc1_pins_default>;
+ ti,non-removable;
+ status = "okay";
+};
+
+&buttons {
+ pinctrl-names = "default";
+ pinctrl-0 = <&push_button_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@0 {
+ label = "push_button";
+ linux,code = <0x100>;
+ gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ };
+};
+
+/* SPI Busses */
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+
+ m25p80@0 {
+ compatible = "mx25l6405d";
+ spi-max-frequency = <40000000>;
+
+ reg = <0>;
+ spi-cpol;
+ spi-cpha;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* reg : The partition's offset and size within the mtd bank. */
+ partitions@0 {
+ label = "MLO";
+ reg = <0x0 0x80000>;
+ };
+
+ partitions@1 {
+ label = "U-Boot";
+ reg = <0x80000 0x100000>;
+ };
+
+ partitions@2 {
+ label = "U-Boot Env";
+ reg = <0x180000 0x40000>;
+ };
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+
+ tpm_spi_tis@0 {
+ compatible = "tcg,tpm_tis-spi";
+ reg = <0>;
+ spi-max-frequency = <500000>;
+ };
+};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
new file mode 100644
index 000000000000..48aee6de4cdb
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
+ *
+ * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
+ * Wes Huang (黃淵河) <wes.huang@moxa.com>
+ * Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
+ */
+
+/dts-v1/;
+
+#include "am335x-moxa-uc-2100-common.dtsi"
+
+/ {
+ model = "Moxa UC-2101";
+ compatible = "moxa,uc-2101", "ti,am33xx";
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ label = "UC2100:GREEN:USER";
+ gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mii1_refclk.rmii1_refclk */
+ >;
+ };
+
+ spi1_pins: pinmux_spi1 {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* ecap0_in_pwm0_out.spi1_sclk */
+ AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE4) /* uart1_ctsn.spi1_cs0 */
+ AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_ctsn.spi1_d0 */
+ AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_rtsn.spi1_d1 */
+ >;
+ };
+};
+
+&davinci_mdio {
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&cpsw_emac0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rmii";
+};
+
+&cpsw_emac1 {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
index f82233cd18e0..5a58efc0c874 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
@@ -422,18 +422,26 @@
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
status = "okay";
+
+ ethphy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ ethphy1: ethernet-phy@5 {
+ reg = <5>;
+ };
};
&cpsw_emac0 {
status = "okay";
- phy_id = <&davinci_mdio>, <4>;
+ phy-handle = <&ethphy0>;
phy-mode = "rmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
status = "okay";
- phy_id = <&davinci_mdio>, <5>;
+ phy-handle = <&ethphy1>;
phy-mode = "rmii";
dual_emac_res_vlan = <2>;
};
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index 946d7069f417..9c9143ed4003 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -380,16 +380,24 @@
&davinci_mdio {
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&ethphy0>;
phy-mode = "mii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <&ethphy1>;
phy-mode = "mii";
dual_emac_res_vlan = <2>;
};
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
index 4d969013f99a..85cd1d0a73ca 100644
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
@@ -161,7 +161,7 @@
invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/
};
- bmp280: pressure@78 {
+ bmp280: pressure@76 {
compatible = "bosch,bmp280";
reg = <0x76>;
};
@@ -424,7 +424,7 @@
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <4>;
+ phy-handle = <&ethphy0>;
phy-mode = "rgmii-txid";
};
@@ -441,6 +441,10 @@
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@4 {
+ reg = <4>;
+ };
};
&mmc1 {
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
index 1ad530a39a95..6dd9d487aaeb 100644
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -373,7 +373,7 @@
ti,pindir-d0-out-d1-in;
status = "okay";
- cfaf240320a032t {
+ display-controller@0 {
compatible = "orisetech,otm3225a";
reg = <0>;
spi-max-frequency = <1000000>;
@@ -533,16 +533,24 @@
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&ethphy0>;
phy-mode = "mii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <&ethphy1>;
phy-mode = "mii";
dual_emac_res_vlan = <2>;
};
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 9fb7426070ce..6be79b8349ac 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -265,13 +265,13 @@
/* Ethernet */
&cpsw_emac0 {
status = "okay";
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&ethphy0>;
phy-mode = "rgmii";
};
&cpsw_emac1 {
status = "okay";
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <&ethphy1>;
phy-mode = "rgmii";
};
@@ -279,6 +279,14 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&mac {
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
index 7b8e7417a11e..35527fdf56cc 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -103,10 +103,14 @@
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&ethphy0>;
phy-mode = "rgmii-txid";
};
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index 4f6a286ea293..1d925ed2b102 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -206,7 +206,6 @@
status = "okay";
slaves = <1>;
cpsw_emac0: slave@4a100200 {
- phy_id = <&davinci_mdio>, <0>;
phy-mode = "mii";
phy-handle = <&ethernetphy0>;
};
diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/am3517-evm-ui.dtsi
new file mode 100644
index 000000000000..e841918c1c26
--- /dev/null
+++ b/arch/arm/boot/dts/am3517-evm-ui.dtsi
@@ -0,0 +1,220 @@
+/*
+ * Copyright (C) 2018 Logic PD, Inc - http://www.logicpd.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ codec1 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "tlv320aic23-hifi";
+
+ simple-audio-card,widgets =
+ "Microphone", "Mic In",
+ "Line", "Line In",
+ "Line", "Line Out";
+
+ simple-audio-card,routing =
+ "Line Out", "LOUT",
+ "Line Out", "ROUT",
+ "LLINEIN", "Line In",
+ "RLINEIN", "Line In",
+ "MICIN", "Mic In";
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_master>;
+ simple-audio-card,frame-master = <&sound_master>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcbsp1>;
+ };
+
+ sound_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic23_1>;
+ system-clock-frequency = <12000000>;
+ };
+ };
+
+ codec2 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "tlv320aic23-hifi";
+
+ simple-audio-card,widgets =
+ "Microphone", "Mic In",
+ "Line", "Line In",
+ "Line", "Line Out";
+
+ simple-audio-card,routing =
+ "Line Out", "LOUT",
+ "Line Out", "ROUT",
+ "LLINEIN", "Line In",
+ "RLINEIN", "Line In",
+ "MICIN", "Mic In";
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_master2>;
+ simple-audio-card,frame-master = <&sound_master2>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcbsp2>;
+ };
+
+ sound_master2: simple-audio-card,codec {
+ sound-dai = <&tlv320aic23_2>;
+ system-clock-frequency = <12000000>;
+ };
+ };
+
+ expander-keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ record {
+ label = "Record";
+ /* linux,code = <BTN_0>; */
+ gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>;
+ };
+
+ play {
+ label = "Play";
+ linux,code = <KEY_PLAY>;
+ gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>;
+ };
+
+ Stop {
+ label = "Stop";
+ linux,code = <KEY_STOP>;
+ gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>;
+ };
+
+ fwd {
+ label = "FWD";
+ linux,code = <KEY_FASTFORWARD>;
+ gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>;
+ };
+
+ rwd {
+ label = "RWD";
+ linux,code = <KEY_REWIND>;
+ gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>;
+ };
+
+ shift {
+ label = "Shift";
+ linux,code = <KEY_LEFTSHIFT>;
+ gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>;
+ };
+
+ Mode {
+ label = "Mode";
+ linux,code = <BTN_MODE>;
+ gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>;
+ };
+
+ Menu {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>;
+ };
+
+ Up {
+ label = "Up";
+ linux,code = <KEY_UP>;
+ gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>;
+ };
+
+ Down {
+ label = "Down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&i2c2 {
+ /* Audio codecs */
+ tlv320aic23_1: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ #sound-dai-cells= <0>;
+ status = "okay";
+ };
+
+ tlv320aic23_2: codec@1b {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1b>;
+ #sound-dai-cells= <0>;
+ status = "okay";
+ };
+};
+
+&i2c3 {
+ /* Audio codecs */
+ tlv320aic23_3: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ #sound-dai-cells= <0>;
+ status = "okay";
+ };
+
+ /* GPIO Expanders */
+ tca6416_2: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <&vdd_io_reg>;
+ };
+
+ tca6416_3: gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <&vdd_io_reg>;
+ };
+
+ /* TVP5146 Analog Video decoder input */
+ tvp5146@5c {
+ compatible = "ti,tvp5146m2";
+ reg = <0x5c>;
+ };
+};
+
+&mcbsp1 {
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 {
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&omap3_pmx_core {
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */
+ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */
+ OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */
+ OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */
+ >;
+ };
+
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index 1d158cfda15f..d4d33cd7adad 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -9,6 +9,7 @@
#include "am3517.dtsi"
#include "am3517-som.dtsi"
+#include "am3517-evm-ui.dtsi"
#include <dt-bindings/input/input.h>
/ {
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index d4b7c59eec68..a68e89dae7a1 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -1101,7 +1101,7 @@
};
};
- qspi: qspi@47900000 {
+ qspi: spi@47900000 {
compatible = "ti,am4372-qspi";
reg = <0x47900000 0x100>,
<0x30000000 0x4000000>;
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
index bff5abe69bdb..4fcf647815a2 100644
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -339,16 +339,24 @@
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&ethphy0>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <&ethphy1>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <2>;
};
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 5b97c20c5ed4..601bf4daaeb7 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -831,10 +831,14 @@
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&ethphy0>;
phy-mode = "rgmii";
};
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 20132477a871..bb285409473e 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -499,10 +499,14 @@
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&ethphy0>;
phy-mode = "rgmii";
};
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index d4be3fd0b6f4..088cba09d34d 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -799,16 +799,24 @@
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ ethphy1: ethernet-phy@5 {
+ reg = <5>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <4>;
+ phy-handle = <&ethphy0>;
phy-mode = "rgmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <5>;
+ phy-handle = <&ethphy1>;
phy-mode = "rgmii";
dual_emac_res_vlan = <2>;
};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 6502d3397653..4ea753b3ee43 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -575,10 +575,14 @@
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@16 {
+ reg = <16>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <16>;
+ phy-handle = <&ethphy0>;
phy-mode = "rmii";
};
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index d9a2049a1ea8..6432309b39e3 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -64,6 +64,82 @@
linux,default-trigger = "mmc0";
};
};
+
+ idk-leds {
+ status = "disabled";
+ compatible = "gpio-leds";
+ red0-led {
+ label = "idk:red0";
+ gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green0-led {
+ label = "idk:green0";
+ gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue0-led {
+ label = "idk:blue0";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red1-led {
+ label = "idk:red1";
+ gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green1-led {
+ label = "idk:green1";
+ gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue1-led {
+ label = "idk:blue1";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red2-led {
+ label = "idk:red2";
+ gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green2-led {
+ label = "idk:green2";
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue2-led {
+ label = "idk:blue2";
+ gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red3-led {
+ label = "idk:red3";
+ gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green3-led {
+ label = "idk:green3";
+ gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue3-led {
+ label = "idk:blue3";
+ gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
};
&extcon_usb2 {
@@ -71,6 +147,10 @@
vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
};
+&sn65hvs882 {
+ load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+};
+
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
@@ -114,7 +194,3 @@
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
};
-
-&cpu0 {
- vdd-supply = <&smps12_reg>;
-};
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
index 784639ddf451..a064f13b3880 100644
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -55,6 +55,82 @@
linux,default-trigger = "mmc0";
};
};
+
+ idk-leds {
+ status = "disabled";
+ compatible = "gpio-leds";
+ red0-led {
+ label = "idk:red0";
+ gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green0-led {
+ label = "idk:green0";
+ gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue0-led {
+ label = "idk:blue0";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red1-led {
+ label = "idk:red1";
+ gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green1-led {
+ label = "idk:green1";
+ gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue1-led {
+ label = "idk:blue1";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red2-led {
+ label = "idk:red2";
+ gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green2-led {
+ label = "idk:green2";
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue2-led {
+ label = "idk:blue2";
+ gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red3-led {
+ label = "idk:red3";
+ gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green3-led {
+ label = "idk:green3";
+ gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue3-led {
+ label = "idk:blue3";
+ gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
};
&extcon_usb2 {
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 3ef9111d0e8b..b2fb6e097be7 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -36,7 +36,3 @@
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20>;
};
-
-&cpu0 {
- vdd-supply = <&smps12_reg>;
-};
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 203266f88480..4748ce8747ad 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -518,7 +518,7 @@
};
/* touch controller */
- ads7846@0 {
+ touchscreen@1 {
pinctrl-names = "default";
pinctrl-0 = <&ads7846_pins>;
@@ -558,13 +558,13 @@
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&ethphy0>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <0>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <&ethphy1>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <1>;
};
@@ -573,6 +573,14 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_pins_default>;
pinctrl-1 = <&davinci_mdio_pins_sleep>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&usb2_phy1 {
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index c9063ffca524..f7bd26458915 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -372,17 +372,27 @@
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&ethphy0>;
phy-mode = "rgmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <&ethphy1>;
phy-mode = "rgmii";
dual_emac_res_vlan = <2>;
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&usb2_phy1 {
phy-supply = <&ldousb_reg>;
};
@@ -478,3 +488,7 @@
};
};
};
+
+&cpu0 {
+ vdd-supply = <&smps12_reg>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index a917cf8825ca..0e4c7c4c8c09 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -371,7 +371,7 @@
clock-names = "uartclk", "apb_pclk";
};
- ssp: ssp@1000d000 {
+ ssp: spi@1000d000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1000d000 0x1000>;
clocks = <&sspclk>, <&pclk>;
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index f935b72d3d96..f2a1d25eb6cf 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -380,7 +380,7 @@
clock-names = "apb_pclk";
};
- pb1176_ssp: ssp@1010b000 {
+ pb1176_ssp: spi@1010b000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1010b000 0x1000>;
interrupt-parent = <&intc_dc1176>;
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
index 36203288de42..7f9cbdf33a51 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -523,7 +523,7 @@
clock-names = "uartclk", "apb_pclk";
};
- ssp@1000d000 {
+ spi@1000d000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1000d000 0x1000>;
interrupt-parent = <&intc_pb11mp>;
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index 10868ba3277f..a5676697ff3b 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -362,7 +362,7 @@
clock-names = "uartclk", "apb_pclk";
};
- ssp: ssp@1000d000 {
+ ssp: spi@1000d000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1000d000 0x1000>;
clocks = <&sspclk>, <&pclk>;
diff --git a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
new file mode 100644
index 000000000000..7881df3b28a0
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 385 AMC board
+ * (DB-88F6820-AMC)
+ *
+ * Copyright (C) 2017 Allied Telesis Labs
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Marvell Armada 385 AMC";
+ compatible = "marvell,a385-db-amc", "marvell,armada385", "marvell,armada380";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ ethernet0 = &eth0;
+ ethernet1 = &eth1;
+ spi1 = &spi1;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000>; /* 2GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+};
+
+&uart0 {
+ /*
+ * Exported on the micro USB connector CON3
+ * through an FTDI
+ */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+
+&eth0 {
+ pinctrl-names = "default";
+ /*
+ * The Reference Clock 0 is used to provide a
+ * clock to the PHY
+ */
+ pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
+&eth2 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "sgmii";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+
+
+&mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ phy1: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ nand-on-flash-bbt;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ reg = <0x00000000 0x40000000>;
+ label = "user";
+ };
+ };
+ };
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie1 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ reg = <0x00000000 0x00100000>;
+ label = "u-boot";
+ };
+ partition@100000 {
+ reg = <0x00100000 0x00040000>;
+ label = "u-boot-env";
+ };
+ };
+ };
+};
+
+&refclk {
+ clock-frequency = <20000000>;
+};
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi
index 7c6ad2afb094..1b0d0680c8b6 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
@@ -48,7 +48,7 @@
&clearfog_sdhci_cd_pins>;
pinctrl-names = "default";
status = "okay";
- vmmc = <&reg_3p3v>;
+ vmmc-supply = <&reg_3p3v>;
wp-inverted;
};
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index 8d708cc22495..59753470cd34 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -189,7 +189,7 @@
};
};
- nand: nand@d0000 {
+ nand_controller: nand-controller@d0000 {
clocks = <&dfx_coredivclk 0>;
};
@@ -243,7 +243,7 @@
ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
pp0: packet-processor@0 {
- compatible = "marvell,prestera-98dx3236";
+ compatible = "marvell,prestera-98dx3236", "marvell,prestera";
reg = <0 0x4000000>;
interrupts = <33>, <34>, <35>;
dfx = <&dfx>;
diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
index 2f5fc67dd6dc..1d9d8a8ea60c 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
@@ -35,5 +35,5 @@
};
&pp0 {
- compatible = "marvell,prestera-98dx3336";
+ compatible = "marvell,prestera-98dx3336", "marvell,prestera";
};
diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
index 7a9e8839880b..48ffdc72bfc7 100644
--- a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
@@ -49,6 +49,6 @@
};
&pp0 {
- compatible = "marvell,prestera-98dx4251";
+ compatible = "marvell,prestera-98dx4251", "marvell,prestera";
interrupts = <33>, <34>, <35>, <36>;
};
diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
index f42fc6118b7c..8a3aa616bbd0 100644
--- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
+++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
@@ -68,14 +68,18 @@
status = "okay";
};
-&nand {
+&nand_controller {
status = "okay";
- label = "pxa3xx_nand-0";
- num-cs = <1>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ };
};
&sdio {
diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
index 8432f517e346..df048050615f 100644
--- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
+++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
@@ -67,14 +67,18 @@
status = "okay";
};
-&nand {
+&nand_controller {
status = "okay";
- label = "pxa3xx_nand-0";
- num-cs = <1>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ };
};
&spi0 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
new file mode 100644
index 000000000000..bdfd8c9f3a7c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "HXT StarDragon 4800 REP2 AST2520";
+ compatible = "hxt,stardragon4800-rep2-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 7>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ system_fault1 {
+ label = "System_fault1";
+ gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ system_fault2 {
+ label = "System_fault2";
+ gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+ flash@0 {
+ status = "okay";
+ };
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2ck_default
+ &pinctrl_spi2miso_default
+ &pinctrl_spi2mosi_default
+ &pinctrl_spi2cs0_default>;
+};
+
+&uart3 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+ current-speed = <115200>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii2_default>;
+ use-ncsi;
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ tmp421@1e {
+ compatible = "ti,tmp421";
+ reg = <0x1e>;
+ };
+ tmp421@2a {
+ compatible = "ti,tmp421";
+ reg = <0x2a>;
+ };
+ tmp421@1c {
+ compatible = "ti,tmp421";
+ reg = <0x1c>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+
+ tmp421@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ nvt210@4c {
+ compatible = "nvt210";
+ reg = <0x4c>;
+ };
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ pagesize = <128>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+
+ pca9641@70 {
+ compatible = "nxp,pca9641";
+ reg = <0x70>;
+ i2c-arb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ dps650ab@58 {
+ compatible = "dps650ab";
+ reg = <0x58>;
+ };
+ };
+ };
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&gpio {
+ pin_gpio_c7 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "BIOS_SPI_MUX_S";
+ };
+ pin_gpio_d1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PHY2_RESET_N";
+ };
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
new file mode 100644
index 000000000000..f8e7b71af7e6
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+// Author: Vijay Khemka <vijaykhemka@fb.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Facebook TiogaPass BMC";
+ compatible = "facebook,tiogapass-bmc", "aspeed,ast2500";
+ aliases {
+ serial0 = &uart1;
+ serial4 = &uart5;
+ };
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&uart1 {
+ // Host Console
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default>;
+};
+
+&uart5 {
+ // BMC Console
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&i2c0 {
+ status = "okay";
+ //Airmax Conn B, CPU0 PIROM, CPU1 PIROM
+};
+
+&i2c1 {
+ status = "okay";
+ //X24 Riser
+};
+
+&i2c2 {
+ status = "okay";
+ // Mezz Management SMBus
+};
+
+&i2c3 {
+ status = "okay";
+ // SMBus to Board ID EEPROM
+};
+
+&i2c4 {
+ status = "okay";
+ // BMC Debug Header
+};
+
+&i2c5 {
+ status = "okay";
+ // CPU Voltage regulators
+};
+
+&i2c6 {
+ status = "okay";
+ tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+ };
+ tmp421@4e {
+ compatible = "ti,tmp421";
+ reg = <0x4e>;
+ };
+ tmp421@4f {
+ compatible = "ti,tmp421";
+ reg = <0x4f>;
+ };
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ pagesize = <32>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+ //HSC, AirMax Conn A
+};
+
+&i2c8 {
+ status = "okay";
+ //Mezz Sensor SMBus
+};
+
+&i2c9 {
+ status = "okay";
+ //USB Debug Connector
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
index 76aa6ea1f988..385c0f4b69ee 100644
--- a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
@@ -7,6 +7,25 @@
model = "Quanta Q71L BMC";
compatible = "quanta,q71l-bmc", "aspeed,ast2400";
+ aliases {
+ i2c14 = &i2c_pcie2;
+ i2c15 = &i2c_pcie3;
+ i2c16 = &i2c_pcie6;
+ i2c17 = &i2c_pcie7;
+ i2c18 = &i2c_pcie1;
+ i2c19 = &i2c_pcie4;
+ i2c20 = &i2c_pcie5;
+ i2c21 = &i2c_pcie8;
+ i2c22 = &i2c_pcie9;
+ i2c23 = &i2c_pcie10;
+ i2c24 = &i2c_ssd1;
+ i2c25 = &i2c_ssd2;
+ i2c26 = &i2c_psu4;
+ i2c27 = &i2c_psu1;
+ i2c28 = &i2c_psu3;
+ i2c29 = &i2c_psu2;
+ };
+
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlyprintk";
@@ -93,6 +112,10 @@
&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
};
+&ibt {
+ status = "okay";
+};
+
&lpc_snoop {
status = "okay";
snoop-ports = <0x80>;
@@ -299,24 +322,44 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+
+ psu@59 {
+ compatible = "pmbus";
+ reg = <0x59>;
+ };
};
i2c_psu1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ psu@58 {
+ compatible = "pmbus";
+ reg = <0x58>;
+ };
};
i2c_psu3: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
+
+ psu@58 {
+ compatible = "pmbus";
+ reg = <0x58>;
+ };
};
i2c_psu2: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
+
+ psu@59 {
+ compatible = "pmbus";
+ reg = <0x59>;
+ };
};
};
@@ -345,6 +388,10 @@
status = "okay";
};
+&adc {
+ status = "okay";
+};
+
&pwm_tacho {
status = "okay";
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b23a983f95a5..69f6b9d2e7e7 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -350,7 +350,7 @@
status = "disabled";
};
- i2c: i2c@1e78a000 {
+ i2c: bus@1e78a000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 87fdc146ff52..d107459fc0f8 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -410,7 +410,7 @@
status = "disabled";
};
- i2c: i2c@1e78a000 {
+ i2c: bus@1e78a000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
index bb86f17ed5ed..21876da7c442 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
@@ -70,9 +70,9 @@
&i2c1 {
status = "okay";
- eeprom@87 {
+ eeprom@57 {
compatible = "giantec,gt24c32a", "atmel,24c32";
- reg = <87>;
+ reg = <0x57>;
pagesize = <32>;
};
};
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
index 4b9176dc5d02..df0f0cc575c1 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
@@ -59,9 +59,9 @@
&i2c1 {
status = "okay";
- ft5426@56 {
+ ft5426@38 {
compatible = "focaltech,ft5426", "edt,edt-ft5406";
- reg = <56>;
+ reg = <0x38>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_ctp_int>;
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index af9f38456d04..911d2c7c1500 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -16,46 +16,6 @@
compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
"atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
- ahb {
- apb {
- pinctrl@fffff200 {
- nattis {
- pinctrl_usba_vbus: usba_vbus {
- atmel,pins =
- <AT91_PIOD 28
- AT91_PERIPH_GPIO
- AT91_PINCTRL_DEGLITCH>;
- };
-
- pinctrl_mmc0_cd: mmc0_cd {
- atmel,pins =
- <AT91_PIOD 5
- AT91_PERIPH_GPIO
- AT91_PINCTRL_PULL_UP_DEGLITCH>;
- };
-
- pinctrl_lcd_prlud0: lcd_prlud0 {
- atmel,pins =
- <AT91_PIOA 21
- AT91_PERIPH_GPIO
- AT91_PINCTRL_OUTPUT_VAL(0)>;
- };
-
- pinctrl_lcd_hipow0: lcd_hipow0 {
- atmel,pins =
- <AT91_PIOA 23
- AT91_PERIPH_GPIO
- AT91_PINCTRL_OUTPUT_VAL(0)>;
- };
- };
- };
-
- watchdog@fffffe40 {
- status = "okay";
- };
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
@@ -103,10 +63,29 @@
};
panel: panel {
- compatible = "sharp,lq150x1lg11";
+ compatible = "sharp,lq150x1lg11", "panel-lvds";
+
backlight = <&panel_bl>;
power-supply = <&panel_reg>;
+ width-mm = <304>;
+ height-mm = <228>;
+
+ data-mapping = "jeida-18";
+
+ panel-timing {
+ // 1024x768 @ 60Hz (typical)
+ clock-frequency = <50000000 65000000 80000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hfront-porch = <48 88 88>;
+ hback-porch = <96 168 168>;
+ hsync-len = <32 64 64>;
+ vsync-len = <3 13 74>;
+ vfront-porch = <3 13 74>;
+ vback-porch = <3 12 74>;
+ };
+
port {
panel_input: endpoint {
remote-endpoint = <&lvds_encoder_output>;
@@ -115,7 +94,10 @@
};
lvds-encoder {
- compatible = "lvds-encoder";
+ compatible = "ti,ds90c185", "lvds-encoder";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvds_prlud0 &pinctrl_lvds_hipow0>;
ports {
#address-cells = <1>;
@@ -159,6 +141,36 @@
};
};
+&pinctrl {
+ nattis {
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO
+ AT91_PINCTRL_DEGLITCH>;
+ };
+
+ pinctrl_mmc0_cd: mmc0_cd {
+ atmel,pins = <AT91_PIOD 5 AT91_PERIPH_GPIO
+ AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_lvds_prlud0: lvds_prlud0 {
+ atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO
+ (AT91_PINCTRL_OUTPUT |
+ AT91_PINCTRL_OUTPUT_VAL(0))>;
+ };
+
+ pinctrl_lvds_hipow0: lvds_hipow0 {
+ atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO
+ (AT91_PINCTRL_OUTPUT |
+ AT91_PINCTRL_OUTPUT_VAL(0))>;
+ };
+ };
+};
+
+&watchdog {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
@@ -195,14 +207,12 @@
hlcdc-display-controller {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_base
- &pinctrl_lcd_rgb565
- &pinctrl_lcd_prlud0
- &pinctrl_lcd_hipow0>;
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
port@0 {
hlcdc_output: endpoint {
remote-endpoint = <&lvds_encoder_input>;
+ bus-width = <16>;
};
};
};
@@ -219,6 +229,7 @@
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index e86e0c00eb6b..363a43d77424 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -283,6 +283,13 @@
status = "okay";
};
+ adc: adc@fc030000 {
+ vddana-supply = <&vddana>;
+ vref-supply = <&advref>;
+
+ status = "disabled";
+ };
+
pinctrl@fc038000 {
pinctrl_can1_default: can1_default {
@@ -549,4 +556,39 @@
linux,default-trigger = "heartbeat";
};
};
+
+ vddin_3v3: fixed-regulator-vddin_3v3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDDIN_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ status = "okay";
+ };
+
+ vddana: fixed-regulator-vddana {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDDANA";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vddin_3v3>;
+ status = "okay";
+ };
+
+ advref: fixed-regulator-advref {
+ compatible = "regulator-fixed";
+
+ regulator-name = "advref";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vddana>;
+ status = "okay";
+ };
};
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index 3b1baa8605a7..2214bfe7aa20 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -92,13 +92,13 @@
reg = <0x40000 0xc0000>;
};
- bootloaderenv@0x100000 {
- label = "bootloader env";
+ bootloaderenvred@0x100000 {
+ label = "bootloader env redundant";
reg = <0x100000 0x40000>;
};
- bootloaderenvred@0x140000 {
- label = "bootloader env redundant";
+ bootloaderenv@0x140000 {
+ label = "bootloader env";
reg = <0x140000 0x40000>;
};
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index fcc85d70f36e..518e2b095ccf 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -281,6 +281,12 @@
status = "okay";
};
+ i2s0: i2s@f8050000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s0_default>;
+ status = "disabled"; /* conflict with can0 */
+ };
+
can0: can@f8054000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can0_default>;
@@ -424,6 +430,24 @@
bias-disable;
};
+ pinctrl_i2s0_default: i2s0_default {
+ pinmux = <PIN_PC1__I2SC0_CK>,
+ <PIN_PC2__I2SC0_MCK>,
+ <PIN_PC3__I2SC0_WS>,
+ <PIN_PC4__I2SC0_DI0>,
+ <PIN_PC5__I2SC0_DO0>;
+ bias-disable;
+ };
+
+ pinctrl_i2s1_default: i2s1_default {
+ pinmux = <PIN_PA15__I2SC1_CK>,
+ <PIN_PA14__I2SC1_MCK>,
+ <PIN_PA16__I2SC1_WS>,
+ <PIN_PA17__I2SC1_DI0>,
+ <PIN_PA18__I2SC1_DO0>;
+ bias-disable;
+ };
+
pinctrl_key_gpio_default: key_gpio_default {
pinmux = <PIN_PB9__GPIO>;
bias-pull-up;
@@ -546,6 +570,12 @@
status = "okay";
};
+ i2s1: i2s@fc04c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s1_default>;
+ status = "disabled"; /* conflict with spi0, sdmmc1 */
+ };
+
can1: can@fc050000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_default>;
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 02c1d2958d78..322a744e4363 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -297,12 +297,17 @@
bootloader@40000 {
label = "bootloader";
- reg = <0x40000 0x80000>;
+ reg = <0x40000 0xc0000>;
};
- bootloaderenv@c0000 {
+ bootloaderenvred@100000 {
+ label = "bootloader env redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ bootloaderenv@140000 {
label = "bootloader env";
- reg = <0xc0000 0xc0000>;
+ reg = <0x140000 0x40000>;
};
dtb@180000 {
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 4b7c762d5f22..43aef56ac74a 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -232,12 +232,17 @@
bootloader@40000 {
label = "bootloader";
- reg = <0x40000 0x80000>;
+ reg = <0x40000 0xc0000>;
};
- bootloaderenv@c0000 {
+ bootloaderenvred@100000 {
+ label = "bootloader env redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ bootloaderenv@140000 {
label = "bootloader env";
- reg = <0xc0000 0xc0000>;
+ reg = <0x140000 0x40000>;
};
dtb@180000 {
@@ -252,7 +257,7 @@
rootfs@800000 {
label = "rootfs";
- reg = <0x800000 0x0f800000>;
+ reg = <0x800000 0x1f800000>;
};
};
};
diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts
index 2fbec69d9cd6..fe8876eaf917 100644
--- a/arch/arm/boot/dts/at91-tse850-3.dts
+++ b/arch/arm/boot/dts/at91-tse850-3.dts
@@ -16,25 +16,6 @@
compatible = "axentia,tse850v3", "axentia,linea",
"atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
- ahb {
- apb {
- pinctrl@fffff200 {
- tse850 {
- pinctrl_usba_vbus: usba-vbus {
- atmel,pins =
- <AT91_PIOC 31
- AT91_PERIPH_GPIO
- AT91_PINCTRL_DEGLITCH>;
- };
- };
- };
-
- watchdog@fffffe40 {
- status = "okay";
- };
- };
- };
-
sck: oscillator {
compatible = "fixed-clock";
@@ -253,6 +234,19 @@
};
};
+&pinctrl {
+ tse850 {
+ pinctrl_usba_vbus: usba-vbus {
+ atmel,pins = <AT91_PIOC 31 AT91_PERIPH_GPIO
+ AT91_PINCTRL_DEGLITCH>;
+ };
+ };
+};
+
+&watchdog {
+ status = "okay";
+};
+
&usart0 {
status = "okay";
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
index 1be9889a2b3a..430277291e02 100644
--- a/arch/arm/boot/dts/at91-vinco.dts
+++ b/arch/arm/boot/dts/at91-vinco.dts
@@ -128,7 +128,7 @@
i2c2: i2c@f8024000 {
status = "okay";
- rtc1: rtc@64 {
+ rtc1: rtc@32 {
compatible = "epson,rx8900";
reg = <0x32>;
};
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
index d2b865f60293..07d1b571e601 100644
--- a/arch/arm/boot/dts/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -127,7 +127,7 @@
spi0: spi@fffc8000 {
cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
- mtd_dataflash@0 {
+ mtd_dataflash@1 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <50000000>;
reg = <1>;
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index a29fc0494076..a57f2d435dca 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -160,7 +160,7 @@
spi-max-frequency = <15000000>;
};
- tsc2046@0 {
+ tsc2046@2 {
reg = <2>;
compatible = "ti,ads7843";
interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 71df3adfc7ca..ec1f17ab6753 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -109,7 +109,7 @@
spi0: spi@fffc8000 {
cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
- mtd_dataflash@0 {
+ mtd_dataflash@1 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <50000000>;
reg = <1>;
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 1ee25a475be8..d16db1fa7e15 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -570,7 +570,7 @@
};
};
- uart1 {
+ usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 4908ee07e628..c4cc9cc945fa 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -85,12 +85,22 @@
uboot@40000 {
label = "u-boot";
- reg = <0x40000 0x80000>;
+ reg = <0x40000 0xc0000>;
};
- ubootenv@c0000 {
+ ubootenvred@100000 {
+ label = "U-Boot Env Redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ ubootenv@140000 {
label = "U-Boot Env";
- reg = <0xc0000 0x140000>;
+ reg = <0x140000 0x40000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
};
kernel@200000 {
@@ -100,7 +110,7 @@
rootfs@800000 {
label = "rootfs";
- reg = <0x800000 0x1f800000>;
+ reg = <0x800000 0x0f800000>;
};
};
};
diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
index 3084a7c95733..e4d49731287f 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -216,7 +216,7 @@
reg = <0x33000 0x14>;
};
- qspi: qspi@27200 {
+ qspi: spi@27200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
reg = <0x027200 0x184>,
<0x027000 0x124>,
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 09ba85046322..2fd111d9d59c 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -273,7 +273,7 @@
brcm,nand-has-wp;
};
- qspi: qspi@27200 {
+ qspi: spi@27200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
reg = <0x027200 0x184>,
<0x027000 0x124>,
@@ -377,7 +377,36 @@
srab: srab@36000 {
compatible = "brcm,nsp-srab";
- reg = <0x36000 0x1000>;
+ reg = <0x36000 0x1000>,
+ <0x3f308 0x8>,
+ <0x3f410 0xc>;
+ reg-names = "srab", "mux_config", "sgmii";
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "link_state_p0",
+ "link_state_p1",
+ "link_state_p2",
+ "link_state_p3",
+ "link_state_p4",
+ "link_state_p5",
+ "link_state_p7",
+ "link_state_p8",
+ "phy",
+ "ts",
+ "imp_sleep_timer_p5",
+ "imp_sleep_timer_p7",
+ "imp_sleep_timer_p8";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
new file mode 100644
index 000000000000..6c8233a36d86
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837-rpi-cm3.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+ compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
+ model = "Raspberry Pi Compute Module 3 IO board V3.0";
+};
+
+&gpio {
+ /*
+ * This is based on the official GPU firmware DT blob.
+ *
+ * Legend:
+ * "NC" = not connected (no rail from the SoC)
+ * "FOO" = GPIO line named "FOO" on the schematic
+ * "FOO_N" = GPIO line named "FOO" on schematic, active low
+ */
+ gpio-line-names = "GPIO0",
+ "GPIO1",
+ "GPIO2",
+ "GPIO3",
+ "GPIO4",
+ "GPIO5",
+ "GPIO6",
+ "GPIO7",
+ "GPIO8",
+ "GPIO9",
+ "GPIO10",
+ "GPIO11",
+ "GPIO12",
+ "GPIO13",
+ "GPIO14",
+ "GPIO15",
+ "GPIO16",
+ "GPIO17",
+ "GPIO18",
+ "GPIO19",
+ "GPIO20",
+ "GPIO21",
+ "GPIO22",
+ "GPIO23",
+ "GPIO24",
+ "GPIO25",
+ "GPIO26",
+ "GPIO27",
+ "GPIO28",
+ "GPIO29",
+ "GPIO30",
+ "GPIO31",
+ "GPIO32",
+ "GPIO33",
+ "GPIO34",
+ "GPIO35",
+ "GPIO36",
+ "GPIO37",
+ "GPIO38",
+ "GPIO39",
+ "GPIO40",
+ "GPIO41",
+ "GPIO42",
+ "GPIO43",
+ "GPIO44",
+ "GPIO45",
+ "GPIO46",
+ "GPIO47",
+ /* Used by eMMC */
+ "SD_CLK_R",
+ "SD_CMD_R",
+ "SD_DATA0_R",
+ "SD_DATA1_R",
+ "SD_DATA2_R",
+ "SD_DATA3_R";
+
+ pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+ hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_gpio14>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
new file mode 100644
index 000000000000..7b7ab6aea988
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2835-rpi.dtsi"
+
+/ {
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ reg_3v3: fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_1v8: fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+};
+
+&firmware {
+ expgpio: gpio {
+ compatible = "raspberrypi,firmware-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "HDMI_HPD_N",
+ "EMMC_EN_N",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC";
+ status = "okay";
+ };
+};
+
+&sdhost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhost_gpio48>;
+ bus-width = <4>;
+ vmmc-supply = <&reg_3v3>;
+ vqmmc-supply = <&reg_1v8>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
index 9403da0990d0..70bece63f9a7 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
@@ -1,4 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/net/microchip-lan78xx.h>
+
/ {
aliases {
ethernet0 = &ethernet;
@@ -21,6 +23,18 @@
ethernet: ethernet@1 {
compatible = "usb424,7800";
reg = <1>;
+
+ mdio {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ eth_phy: ethernet-phy@1 {
+ reg = <1>;
+ microchip,led-modes = <
+ LAN78XX_LINK_1000_ACTIVITY
+ LAN78XX_LINK_10_100_ACTIVITY
+ >;
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
index 5f663f848db1..189cc3dcd6ef 100644
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -94,6 +94,34 @@
&spi_nor {
status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ label = "boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ os-image@100000 {
+ label = "os-image";
+ reg = <0x040000 0x200000>;
+ compatible = "brcm,trx";
+ };
+
+ rootfs@240000 {
+ label = "rootfs";
+ reg = <0x240000 0xc00000>;
+ };
+
+ nvram@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x010000>;
+ };
+ };
};
&usb2 {
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index 2033411240c7..4cb10f88a95e 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -66,3 +66,34 @@
&usb3_phy {
status = "okay";
};
+
+&nandcs {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ label = "boot";
+ reg = <0x00000000 0x00080000>;
+ read-only;
+ };
+
+ nvram@80000 {
+ label = "nvram";
+ reg = <0x00080000 0x00180000>;
+ };
+
+ firmware@200000 {
+ label = "firmware";
+ reg = <0x00200000 0x07cc0000>;
+ compatible = "brcm,trx";
+ };
+
+ asus@7ec0000 {
+ label = "asus";
+ reg = <0x07ec0000 0x00140000>;
+ read-only;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index c7143a9daa1a..b527d2ff987e 100644
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -103,6 +103,34 @@
&spi_nor {
status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ label = "boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ os-image@100000 {
+ label = "os-image";
+ reg = <0x040000 0x200000>;
+ compatible = "brcm,trx";
+ };
+
+ rootfs@240000 {
+ label = "rootfs";
+ reg = <0x240000 0xc00000>;
+ };
+
+ nvram@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x010000>;
+ };
+ };
};
&usb3_phy {
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
index e5a2d62daf92..925a7c9ce5b7 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
@@ -12,6 +12,10 @@
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
+
+ partitions {
+ compatible = "brcm,bcm947xx-cfe-partitions";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index bc607d11eef8..7a5c188c2676 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -475,8 +475,11 @@
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
- linux,part-probe = "ofpart", "bcm47xxpart";
status = "disabled";
+
+ partitions {
+ compatible = "brcm,bcm947xx-cfe-partitions";
+ };
};
};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index ea3fc194f8f3..a53a2f629d74 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -58,6 +58,24 @@
open-source;
priority = <200>;
};
+
+ /* Hardware I2C block cannot do more than 63 bytes per transfer,
+ * which would prevent reading from a SFP's EEPROM (256 byte).
+ */
+ i2c1: i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpioa 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ };
+
+ sfp: sfp {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c1>;
+ mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+ los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpioa 26 GPIO_ACTIVE_HIGH>;
+ };
};
&amac0 {
@@ -210,6 +228,14 @@
reg = <4>;
};
+ port@5 {
+ label = "sfp";
+ phy-mode = "sgmii";
+ reg = <5>;
+ sfp = <&sfp>;
+ managed = "in-band-status";
+ };
+
port@8 {
ethernet = <&amac2>;
label = "cpu";
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index f9b757905845..a3c9b346721d 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -221,6 +221,12 @@
gpio-controller;
#gpio-cells = <2>;
};
+ tca6416_bb: gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
&wdt {
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index c4729d0e6c19..66fcadf0ba91 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -352,7 +352,8 @@
compatible = "ti,ads7957";
reg = <3>;
#io-channel-cells = <1>;
- spi-max-frequency = <10000000>;
+ spi-max-frequency = <1000000>;
+ ti,spi-wdelay = <63>;
vref-supply = <&adc_ref>;
};
};
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
index 85d7b5148b0a..2d201719ba69 100644
--- a/arch/arm/boot/dts/dm8148-evm.dts
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -27,15 +27,25 @@
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&ethphy0>;
phy-mode = "rgmii";
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <&ethphy1>;
phy-mode = "rgmii";
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&gpmc {
ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
index c46a227b543d..63301bcacf19 100644
--- a/arch/arm/boot/dts/dm8148-t410.dts
+++ b/arch/arm/boot/dts/dm8148-t410.dts
@@ -36,15 +36,25 @@
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&ethphy0>;
phy-mode = "rgmii";
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <&ethphy1>;
phy-mode = "rgmii";
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc1 {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 580e3cbcfbf7..3e1584e787ae 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -87,7 +87,7 @@
status = "okay";
clock-frequency = <100000>;
- si5351: clock-generator {
+ si5351: clock-generator@60 {
compatible = "silabs,si5351a-msop";
reg = <0x60>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 4a0a5115b298..250ad0535e8c 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -155,7 +155,7 @@
0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800 /* CESA SRAM 2k */
0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU SRAM 2k */
- spi0: spi-ctrl@10600 {
+ spi0: spi@10600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
@@ -168,7 +168,7 @@
status = "disabled";
};
- i2c: i2c-ctrl@11000 {
+ i2c: i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
#address-cells = <1>;
@@ -218,7 +218,7 @@
status = "disabled";
};
- spi1: spi-ctrl@14600 {
+ spi1: spi@14600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
index 31b824ad5d29..906aedde045d 100644
--- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts
+++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -27,15 +27,25 @@
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&ethphy0>;
phy-mode = "rgmii";
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <&ethphy1>;
phy-mode = "rgmii";
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&gpmc {
ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 6ed5f9156270..cc079064a23b 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -512,17 +512,27 @@
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <2>;
+ phy-handle = <&ethphy0>;
phy-mode = "rgmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <3>;
+ phy-handle = <&ethphy1>;
phy-mode = "rgmii";
dual_emac_res_vlan = <2>;
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy1: ethernet-phy@3 {
+ reg = <3>;
+ };
+};
+
&dcan1 {
status = "ok";
pinctrl-names = "default", "sleep", "active";
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index a0ddf497e8cd..7ce24b282d42 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -336,6 +336,7 @@
<0 0 0 2 &pcie1_intc 2>,
<0 0 0 3 &pcie1_intc 3>,
<0 0 0 4 &pcie1_intc 4>;
+ ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
status = "disabled";
pcie1_intc: interrupt-controller {
interrupt-controller;
@@ -354,7 +355,7 @@
ti,hwmods = "pcie1";
phys = <&pcie1_phy>;
phy-names = "pcie-phy0";
- ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
+ ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
status = "disabled";
};
};
@@ -387,6 +388,7 @@
<0 0 0 2 &pcie2_intc 2>,
<0 0 0 3 &pcie2_intc 3>,
<0 0 0 4 &pcie2_intc 4>;
+ ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
pcie2_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
@@ -1369,7 +1371,7 @@
status = "disabled";
};
- qspi: qspi@4b300000 {
+ qspi: spi@4b300000 {
compatible = "ti,dra7xxx-qspi";
reg = <0x4b300000 0x100>,
<0x5c000000 0x4000000>;
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index c471bf3277b4..82cc7ec37af0 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -203,13 +203,13 @@
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <2>;
+ phy-handle = <&dp83867_0>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <3>;
+ phy-handle = <&dp83867_1>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
};
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
index bf588d00728d..fafc2a4d7bb9 100644
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -61,13 +61,13 @@
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <2>;
+ phy-handle = <&dp83867_0>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <3>;
+ phy-handle = <&dp83867_1>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index c572693b1665..154b0a0ceb18 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -51,10 +51,16 @@
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <3>;
+ phy-handle = <&ethphy0>;
phy-mode = "rgmii";
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@3 {
+ reg = <3>;
+ };
+};
+
&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
pinctrl-0 = <&mmc1_pins_default>;
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 5a46163d465f..8a57895fd8f3 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -375,13 +375,13 @@
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <2>;
+ phy-handle = <&dp83867_0>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <3>;
+ phy-handle = <&dp83867_1>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
};
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 620b50c19ead..7c22cbf6f3d4 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -69,6 +69,8 @@
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx3>;
interrupts = <5 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s2mps14_irq>;
reg = <0x66>;
s2mps14_osc: clocks {
@@ -350,6 +352,11 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
samsung,pin-val = <1>;
};
+
+ s2mps14_irq: s2mps14-irq {
+ samsung,pins = "gpx3-5";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
};
&rtc {
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 2ab99f9f3d0a..dd9ec05eb0f7 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -151,6 +151,8 @@
reg = <0x66>;
interrupt-parent = <&gpx0>;
interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max8997_irq>;
max8997,pmic-buck1-dvs-voltage = <1350000>;
max8997,pmic-buck2-dvs-voltage = <1100000>;
@@ -288,6 +290,13 @@
};
};
+&pinctrl_1 {
+ max8997_irq: max8997-irq {
+ samsung,pins = "gpx0-3", "gpx0-4";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
+
&sdhci_0 {
bus-width = <4>;
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 6f1d76cb7951..f9bbc6315cd9 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -385,6 +385,12 @@
regulator-max-microvolt = <1800000>;
};
+ tflash_reg: LDO17 {
+ regulator-name = "VTF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
vddq_reg: LDO21 {
regulator-name = "VDDQ_M1M2_1.2V";
regulator-min-microvolt = <1200000>;
@@ -452,6 +458,15 @@
status = "okay";
};
+&sdhci_2 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+ pinctrl-names = "default";
+ vmmc-supply = <&tflash_reg>;
+ cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
&serial_0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 4e6ff97e1ec4..5c3d98654f13 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -310,6 +310,9 @@
pmic@66 {
compatible = "national,lp3974";
+ interrupts-extended = <&gpx0 7 0>, <&gpx2 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lp3974_irq>;
reg = <0x66>;
max8998,pmic-buck1-default-dvs-idx = <0>;
@@ -503,6 +506,11 @@
};
&pinctrl_1 {
+ lp3974_irq: lp3974-irq {
+ samsung,pins = "gpx0-7", "gpx2-7";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
hdmi_hpd: hdmi-hpd {
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -537,8 +545,7 @@
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
pinctrl-names = "default";
vmmc-supply = <&ldo5_reg>;
- cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index c0476c290977..aed2f2e2b0d1 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -1269,8 +1269,7 @@
&sdhci_2 {
bus-width = <4>;
- cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
pinctrl-names = "default";
vmmc-supply = <&ldo21_reg>;
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index a09e46c9dbc0..2caa3132f34e 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -539,8 +539,7 @@
pinctrl-names = "default";
vmmc-supply = <&ldo21_reg>;
vqmmc-supply = <&ldo4_reg>;
- cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpk2 2 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 7a8a5c55701a..7d1f2dc59038 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -71,6 +71,17 @@
};
};
+ panel: panel {
+ compatible = "boe,hv070wsa-100";
+ power-supply = <&vcc_3v3_reg>;
+ enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
+ port {
+ panel_ep: endpoint {
+ remote-endpoint = <&bridge_out_ep>;
+ };
+ };
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
@@ -97,6 +108,30 @@
reg = <2>;
regulator-name = "hdmi-en";
};
+
+ vcc_1v2_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "VCC_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vcc_1v8_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc_3v3_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
fixed-rate-clocks {
@@ -119,6 +154,32 @@
cpu0-supply = <&buck2_reg>;
};
+&dsi_0 {
+ vddcore-supply = <&ldo8_reg>;
+ vddio-supply = <&ldo10_reg>;
+ samsung,pll-clock-frequency = <24000000>;
+ samsung,burst-clock-frequency = <320000000>;
+ samsung,esc-clock-frequency = <10000000>;
+ status = "okay";
+
+ bridge@0 {
+ reg = <0>;
+ compatible = "toshiba,tc358764";
+ vddc-supply = <&vcc_1v2_reg>;
+ vddio-supply = <&vcc_1v8_reg>;
+ vddlvds-supply = <&vcc_3v3_reg>;
+ reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@1 {
+ reg = <1>;
+ bridge_out_ep: endpoint {
+ remote-endpoint = <&panel_ep>;
+ };
+ };
+ };
+};
+
&dp {
status = "okay";
samsung,color-space = <0>;
@@ -149,9 +210,11 @@
};
&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd>;
status = "okay";
- ddc = <&i2c_2>;
- hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>;
+ ddc = <&i2c_ddc>;
+ hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
vdd-supply = <&ldo8_reg>;
@@ -168,6 +231,8 @@
reg = <0x66>;
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s5m8767_irq>;
vinb1-supply = <&main_dc_reg>;
vinb2-supply = <&main_dc_reg>;
@@ -452,13 +517,6 @@
};
};
-&i2c_2 {
- status = "okay";
- /* used by HDMI DDC */
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-};
-
&i2c_3 {
status = "okay";
@@ -535,6 +593,13 @@
cap-sd-highspeed;
};
+&pinctrl_0 {
+ s5m8767_irq: s5m8767-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
+
&rtc {
status = "okay";
};
@@ -547,3 +612,22 @@
status = "okay";
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
};
+
+&soc {
+ /*
+ * For unknown reasons HDMI-DDC does not work with Exynos I2C
+ * controllers. Lets use software I2C over GPIO pins as a workaround.
+ */
+ i2c_ddc: i2c-gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_gpio_bus>;
+ status = "okay";
+ compatible = "i2c-gpio";
+ gpios = <&gpa0 6 0 /* sda */
+ &gpa0 7 0 /* scl */
+ >;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 6ff6dea29d44..d31a68672bfa 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -225,6 +225,12 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+ i2c2_gpio_bus: i2c2-gpio-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
uart2_data: uart2-data {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -593,6 +599,11 @@
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+
+ hdmi_hpd: hdmi-hpd {
+ samsung,pins = "gpx3-7";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
};
&pinctrl_1 {
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
index 0348b1c49a69..7cbfc6f1f4b8 100644
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -20,6 +20,14 @@
samsung,model = "Snow-I2S-MAX98090";
samsung,audio-codec = <&max98090>;
+
+ cpu {
+ sound-dai = <&i2s0 0>;
+ };
+
+ codec {
+ sound-dai = <&max98090 0>, <&hdmi>;
+ };
};
};
@@ -31,6 +39,9 @@
interrupt-parent = <&gpx0>;
pinctrl-names = "default";
pinctrl-0 = <&max98090_irq>;
+ clocks = <&pmu_system_controller 0>;
+ clock-names = "mclk";
+ #sound-dai-cells = <1>;
};
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index da163a40af15..5044f754e6e5 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -54,62 +54,109 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
- clock-frequency = <1700000000>;
clocks = <&clock CLK_ARM_CLK>;
clock-names = "cpu";
- clock-latency = <140000>;
-
- operating-points = <
- 1700000 1300000
- 1600000 1250000
- 1500000 1225000
- 1400000 1200000
- 1300000 1150000
- 1200000 1125000
- 1100000 1100000
- 1000000 1075000
- 900000 1050000
- 800000 1025000
- 700000 1012500
- 600000 1000000
- 500000 975000
- 400000 950000
- 300000 937500
- 200000 925000
- >;
+ operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <1>;
- clock-frequency = <1700000000>;
clocks = <&clock CLK_ARM_CLK>;
clock-names = "cpu";
- clock-latency = <140000>;
-
- operating-points = <
- 1700000 1300000
- 1600000 1250000
- 1500000 1225000
- 1400000 1200000
- 1300000 1150000
- 1200000 1125000
- 1100000 1100000
- 1000000 1075000
- 900000 1050000
- 800000 1025000
- 700000 1012500
- 600000 1000000
- 500000 975000
- 400000 950000
- 300000 937500
- 200000 925000
- >;
+ operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>; /* min followed by max */
};
};
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <925000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <937500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <975000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <1012500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1025000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <1050000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1075000>;
+ clock-latency-ns = <140000>;
+ opp-suspend;
+ };
+ opp-1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1125000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1150000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt = <1200000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1225000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <1250000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1700000000 {
+ opp-hz = /bits/ 64 <1700000000>;
+ opp-microvolt = <1300000>;
+ clock-latency-ns = <140000>;
+ };
+ };
+
soc: soc {
sysram@2020000 {
compatible = "mmio-sram";
@@ -756,6 +803,27 @@
#phy-cells = <0>;
};
+ mipi_phy: video-phy@10040710 {
+ compatible = "samsung,s5pv210-mipi-video-phy";
+ reg = <0x10040710 0x100>;
+ #phy-cells = <1>;
+ syscon = <&pmu_system_controller>;
+ };
+
+ dsi_0: dsi@14500000 {
+ compatible = "samsung,exynos4210-mipi-dsi";
+ reg = <0x14500000 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ samsung,power-domain = <&pd_disp1>;
+ phys = <&mipi_phy 3>;
+ phy-names = "dsim";
+ clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI1>;
+ clock-names = "bus_clk", "sclk_mipi";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
adc: adc@12d10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index a2046f5f998c..434a7591ff63 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -530,7 +530,7 @@
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4 &sd2_wp>;
bus-width = <4>;
cap-sd-highspeed;
vmmc-supply = <&ldo21_reg>;
@@ -545,6 +545,14 @@
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
+ sd2_wp: sd2-wp {
+ samsung,pins = "gpm5-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ /* Pin is floating so be sure to disable write-protect */
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+ };
+
pmic_dvs_3: pmic-dvs-3 {
samsung,pins = "gpx0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 57c2332bf282..f78db6809cca 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -153,7 +153,7 @@
&clock_audss {
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
- assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+ assigned-clock-parents = <&clock CLK_MAU_EPLL>;
};
&cpu0 {
@@ -312,6 +312,7 @@
regulator-name = "vdd_1v35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
@@ -333,6 +334,7 @@
regulator-name = "vdd_2v";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
@@ -343,6 +345,7 @@
regulator-name = "vdd_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 2f4f40882dab..2fac4baf1eb4 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -154,6 +154,13 @@
regulator-always-on;
};
+ ldo2_reg: LDO2 {
+ regulator-name = "vdd_ldo2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
ldo3_reg: LDO3 {
regulator-name = "vddq_mmc0";
regulator-min-microvolt = <1800000>;
@@ -216,10 +223,10 @@
};
ldo12_reg: LDO12 {
+ /* Unused */
regulator-name = "vdd_ldo12";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2375000>;
};
ldo13_reg: LDO13 {
@@ -228,6 +235,13 @@
regulator-max-microvolt = <2800000>;
};
+ ldo14_reg: LDO14 {
+ /* Unused */
+ regulator-name = "vdd_ldo14";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
ldo15_reg: LDO15 {
regulator-name = "vdd_ldo15";
regulator-min-microvolt = <3300000>;
@@ -236,10 +250,10 @@
};
ldo16_reg: LDO16 {
+ /* Unused */
regulator-name = "vdd_ldo16";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- regulator-always-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
};
ldo17_reg: LDO17 {
@@ -261,20 +275,139 @@
regulator-max-microvolt = <2800000>;
};
- ldo24_reg: LDO24 {
- regulator-name = "tsp_io";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
+ ldo20_reg: LDO20 {
+ /* Unused */
+ regulator-name = "vdd_ldo20";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo21_reg: LDO21 {
+ /* Unused */
+ regulator-name = "vdd_ldo21";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo22_reg: LDO22 {
+ /* Unused */
+ regulator-name = "vdd_ldo22";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2375000>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "vdd_mifs";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
regulator-always-on;
};
+ ldo24_reg: LDO24 {
+ /* Unused */
+ regulator-name = "vdd_ldo24";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo25_reg: LDO25 {
+ /* Unused */
+ regulator-name = "vdd_ldo25";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
ldo26_reg: LDO26 {
+ /* Used on XU3, XU3-Lite and XU4 */
regulator-name = "vdd_ldo26";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "vdd_g3ds";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
regulator-always-on;
};
+ ldo28_reg: LDO28 {
+ /* Used on XU3 */
+ regulator-name = "vdd_ldo28";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo29_reg: LDO29 {
+ /* Unused */
+ regulator-name = "vdd_ldo29";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo30_reg: LDO30 {
+ /* Unused */
+ regulator-name = "vdd_ldo30";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo31_reg: LDO31 {
+ /* Unused */
+ regulator-name = "vdd_ldo31";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo32_reg: LDO32 {
+ /* Unused */
+ regulator-name = "vdd_ldo32";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo33_reg: LDO33 {
+ /* Unused */
+ regulator-name = "vdd_ldo33";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo34_reg: LDO34 {
+ /* Unused */
+ regulator-name = "vdd_ldo34";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo35_reg: LDO35 {
+ /* Unused */
+ regulator-name = "vdd_ldo35";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2375000>;
+ };
+
+ ldo36_reg: LDO36 {
+ /* Unused */
+ regulator-name = "vdd_ldo36";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo37_reg: LDO37 {
+ /* Unused */
+ regulator-name = "vdd_ldo37";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo38_reg: LDO38 {
+ /* Unused */
+ regulator-name = "vdd_ldo38";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <800000>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 96e281c0a118..e522edb2bb82 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -367,6 +367,12 @@
status = "okay";
};
+&ldo26_reg {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+};
+
&mixer {
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index 0322f281912c..db0bc17a667b 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -49,6 +49,12 @@
};
};
+&ldo28_reg {
+ regulator-name = "dp_p3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+};
+
&pwm {
/*
* PWM 0 -- fan
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index d80ab9085da1..e0f470fe54c8 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -153,7 +153,7 @@
&clock_audss {
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
- assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+ assigned-clock-parents = <&clock CLK_MAU_EPLL>;
};
&cpu0 {
@@ -312,6 +312,7 @@
regulator-name = "vdd_1v35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
@@ -333,6 +334,7 @@
regulator-name = "vdd_2v";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
@@ -343,6 +345,7 @@
regulator-name = "vdd_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index 44044f275115..0f917b272ff3 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -277,10 +277,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb0_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator0_out_port0>;
+ in-ports {
+ port {
+ etb0_in_port: endpoint@0 {
+ remote-endpoint = <&replicator0_out_port0>;
+ };
};
};
};
@@ -291,10 +292,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb1_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator1_out_port0>;
+ in-ports {
+ port {
+ etb1_in_port: endpoint@0 {
+ remote-endpoint = <&replicator1_out_port0>;
+ };
};
};
};
@@ -305,10 +307,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb2_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator2_out_port0>;
+ in-ports {
+ port {
+ etb2_in_port: endpoint@0 {
+ remote-endpoint = <&replicator2_out_port0>;
+ };
};
};
};
@@ -319,10 +322,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb3_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator3_out_port0>;
+ in-ports {
+ port {
+ etb3_in_port: endpoint@0 {
+ remote-endpoint = <&replicator3_out_port0>;
+ };
};
};
};
@@ -333,10 +337,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&funnel4_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint@0 {
+ remote-endpoint = <&funnel4_out_port0>;
+ };
};
};
};
@@ -347,7 +352,7 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -365,12 +370,11 @@
remote-endpoint = <&funnel4_in_port0>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator0_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel0_out_port0>;
};
};
@@ -383,7 +387,7 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -401,12 +405,11 @@
remote-endpoint = <&funnel4_in_port1>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator1_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out_port0>;
};
};
@@ -419,11 +422,10 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port@0 {
reg = <0>;
replicator2_out_port0: endpoint {
@@ -437,12 +439,11 @@
remote-endpoint = <&funnel4_in_port2>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator2_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel2_out_port0>;
};
};
@@ -455,11 +456,10 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port@0 {
reg = <0>;
replicator3_out_port0: endpoint {
@@ -473,12 +473,11 @@
remote-endpoint = <&funnel4_in_port3>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator3_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel3_out_port0>;
};
};
@@ -491,48 +490,43 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel0_out_port0: endpoint {
remote-endpoint =
<&replicator0_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel0_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel0_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel0_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm2_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel0_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm3_out_port>;
};
};
@@ -545,48 +539,43 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel1_out_port0: endpoint {
remote-endpoint =
<&replicator1_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel1_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm4_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel1_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm5_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel1_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm6_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel1_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm7_out_port>;
};
};
@@ -599,48 +588,43 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel2_out_port0: endpoint {
remote-endpoint =
<&replicator2_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel2_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm8_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel2_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm9_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel2_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm10_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel2_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm11_out_port>;
};
};
@@ -653,48 +637,43 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel3_out_port0: endpoint {
remote-endpoint =
<&replicator3_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel3_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm12_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel3_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm13_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel3_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm14_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel3_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm15_out_port>;
};
};
@@ -707,50 +686,45 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel4_out_port0: endpoint {
remote-endpoint = <&tpiu_in_port>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel4_in_port0: endpoint {
- slave-mode;
remote-endpoint =
<&replicator0_out_port1>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel4_in_port1: endpoint {
- slave-mode;
remote-endpoint =
<&replicator1_out_port1>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel4_in_port2: endpoint {
- slave-mode;
remote-endpoint =
<&replicator2_out_port1>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel4_in_port3: endpoint {
- slave-mode;
remote-endpoint =
<&replicator3_out_port1>;
};
@@ -765,9 +739,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU0>;
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port0>;
+ };
};
};
};
@@ -779,9 +755,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU1>;
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port1>;
+ };
};
};
};
@@ -793,9 +771,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU2>;
- port {
- ptm2_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port2>;
+ out-ports {
+ port {
+ ptm2_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port2>;
+ };
};
};
};
@@ -807,9 +787,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU3>;
- port {
- ptm3_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port3>;
+ out-ports {
+ port {
+ ptm3_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port3>;
+ };
};
};
};
@@ -821,9 +803,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU4>;
- port {
- ptm4_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port0>;
+ out-ports {
+ port {
+ ptm4_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port0>;
+ };
};
};
};
@@ -835,9 +819,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU5>;
- port {
- ptm5_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port1>;
+ out-ports {
+ port {
+ ptm5_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port1>;
+ };
};
};
};
@@ -849,9 +835,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU6>;
- port {
- ptm6_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port2>;
+ out-ports {
+ port {
+ ptm6_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port2>;
+ };
};
};
};
@@ -863,9 +851,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU7>;
- port {
- ptm7_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port3>;
+ out-ports {
+ port {
+ ptm7_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port3>;
+ };
};
};
};
@@ -877,9 +867,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU8>;
- port {
- ptm8_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port0>;
+ out-ports {
+ port {
+ ptm8_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port0>;
+ };
};
};
};
@@ -890,9 +882,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU9>;
- port {
- ptm9_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port1>;
+ out-ports {
+ port {
+ ptm9_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port1>;
+ };
};
};
};
@@ -904,9 +898,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU10>;
- port {
- ptm10_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port2>;
+ out-ports {
+ port {
+ ptm10_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port2>;
+ };
};
};
};
@@ -918,9 +914,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU11>;
- port {
- ptm11_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port3>;
+ out-ports {
+ port {
+ ptm11_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port3>;
+ };
};
};
};
@@ -932,9 +930,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU12>;
- port {
- ptm12_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port0>;
+ out-ports {
+ port {
+ ptm12_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port0>;
+ };
};
};
};
@@ -946,9 +946,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU13>;
- port {
- ptm13_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port1>;
+ out-ports {
+ port {
+ ptm13_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port1>;
+ };
};
};
};
@@ -960,9 +962,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU14>;
- port {
- ptm14_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port2>;
+ out-ports {
+ port {
+ ptm14_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port2>;
+ };
};
};
};
@@ -974,9 +978,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU15>;
- port {
- ptm15_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port3>;
+ out-ports {
+ port {
+ ptm15_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port3>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi
index 3edc7b5550d8..b00ece16b853 100644
--- a/arch/arm/boot/dts/imx1.dtsi
+++ b/arch/arm/boot/dts/imx1.dtsi
@@ -164,7 +164,7 @@
reg = <0x00210000 0x10000>;
ranges;
- cspi1: cspi@213000 {
+ cspi1: spi@213000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx1-cspi";
@@ -186,7 +186,7 @@
status = "disabled";
};
- cspi2: cspi@219000 {
+ cspi2: spi@219000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx1-cspi";
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index ad2ae25b7b4d..98efe1aeb26a 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -58,7 +58,7 @@
status = "okay";
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index e9351774c619..31b1e3581ac0 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -25,7 +25,7 @@
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
@@ -59,7 +59,7 @@
};
};
- ssp1: ssp@80034000 {
+ ssp1: spi@80034000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx23-spi";
diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts
index 67de7863ad79..faf701b2adb2 100644
--- a/arch/arm/boot/dts/imx23-sansa.dts
+++ b/arch/arm/boot/dts/imx23-sansa.dts
@@ -55,7 +55,7 @@
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
@@ -65,7 +65,7 @@
status = "okay";
};
- ssp1: ssp@80034000 {
+ ssp1: spi@80034000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc1_8bit_pins_a>;
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
index 95c7b918f6d6..2ff6cdf71a55 100644
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -22,7 +22,7 @@
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts
index 9616e500b996..db53089fb7fb 100644
--- a/arch/arm/boot/dts/imx23-xfi3.dts
+++ b/arch/arm/boot/dts/imx23-xfi3.dts
@@ -54,7 +54,7 @@
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
@@ -64,7 +64,7 @@
status = "okay";
};
- ssp1: ssp@80034000 {
+ ssp1: spi@80034000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc1_4bit_pins_a>;
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 71bfd2b15609..ea259927eef6 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -93,7 +93,7 @@
status = "disabled";
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
reg = <0x80010000 0x2000>;
interrupts = <15>;
clocks = <&clks 33>;
@@ -457,7 +457,7 @@
status = "disabled";
};
- ssp1: ssp@80034000 {
+ ssp1: spi@80034000 {
reg = <0x80034000 0x2000>;
interrupts = <2>;
clocks = <&clks 33>;
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 85c15ee63272..b25309d26ea5 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -168,7 +168,7 @@
status = "disabled";
};
- spi1: cspi@43fa4000 {
+ spi1: spi@43fa4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
@@ -209,7 +209,7 @@
reg = <0x50000000 0x40000>;
ranges;
- spi3: cspi@50004000 {
+ spi3: spi@50004000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
@@ -238,7 +238,7 @@
status = "disabled";
};
- spi2: cspi@50010000 {
+ spi2: spi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 753d88df1627..151b0eb17dda 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -209,7 +209,7 @@
status = "disabled";
};
- cspi1: cspi@1000e000 {
+ cspi1: spi@1000e000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
@@ -221,7 +221,7 @@
status = "disabled";
};
- cspi2: cspi@1000f000 {
+ cspi2: spi@1000f000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
@@ -373,7 +373,7 @@
status = "disabled";
};
- cspi3: cspi@10017000 {
+ cspi3: spi@10017000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index c4fadbc1b400..8df5ec470376 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -18,7 +18,7 @@
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
@@ -27,7 +27,7 @@
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-spi";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>;
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 96faa53ba44c..6c9b498305c0 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -18,7 +18,7 @@
status = "okay";
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
@@ -26,7 +26,7 @@
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index e54f5aba7091..8337ca21e281 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -66,7 +66,7 @@
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
index 97084e463d7c..f4f2b3d16c8e 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
@@ -25,7 +25,7 @@
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
@@ -36,7 +36,7 @@
non-removable;
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_b
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
index 22215337f72a..71d0fcbc2d8c 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
@@ -26,7 +26,7 @@
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
@@ -37,7 +37,7 @@
non-removable;
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_b
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
index 13e7b134da9e..6580ec6e26ba 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
@@ -29,7 +29,7 @@
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
@@ -40,7 +40,7 @@
non-removable;
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-spi";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>;
diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts
index 88556c93b00f..693634edae99 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2.dts
@@ -25,7 +25,7 @@
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
@@ -36,7 +36,7 @@
non-removable;
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_b
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
index f286bfe699be..16f524428ed7 100644
--- a/arch/arm/boot/dts/imx28-duckbill.dts
+++ b/arch/arm/boot/dts/imx28-duckbill.dts
@@ -24,7 +24,7 @@
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
@@ -34,7 +34,7 @@
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-spi";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>;
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 93ab5bdfe068..5778300f44e8 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -103,7 +103,7 @@
status = "okay";
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
@@ -114,13 +114,13 @@
status = "okay";
};
- ssp1: ssp@80012000 {
+ ssp1: spi@80012000 {
compatible = "fsl,imx28-mmc";
bus-width = <8>;
wp-gpios = <&gpio0 28 0>;
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-spi";
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
index 3bb5ffc644d6..8883d36a51b5 100644
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -41,7 +41,7 @@
};
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
@@ -52,7 +52,7 @@
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_a
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 7d97a0ce74a3..893886d17b2d 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -18,7 +18,7 @@
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
@@ -30,7 +30,7 @@
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-spi";
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 2393e83979e0..ea9212f6ecda 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -40,7 +40,7 @@
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a>;
@@ -48,7 +48,7 @@
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-spi";
diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts
index f8a09a8c2c36..dccdd6bcd0b2 100644
--- a/arch/arm/boot/dts/imx28-ts4600.dts
+++ b/arch/arm/boot/dts/imx28-ts4600.dts
@@ -25,7 +25,7 @@
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 5107fdc482ea..2b7efb659fc0 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -117,7 +117,7 @@
status = "disabled";
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80010000 0x2000>;
@@ -128,7 +128,7 @@
status = "disabled";
};
- ssp1: ssp@80012000 {
+ ssp1: spi@80012000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80012000 0x2000>;
@@ -139,7 +139,7 @@
status = "disabled";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80014000 0x2000>;
@@ -150,7 +150,7 @@
status = "disabled";
};
- ssp3: ssp@80016000 {
+ ssp3: spi@80016000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80016000 0x2000>;
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index ca1419ca303c..af7afccf5f2f 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -206,7 +206,7 @@
status = "disabled";
};
- spi2: cspi@50010000 {
+ spi2: spi@50010000 {
compatible = "fsl,imx31-cspi";
reg = <0x50010000 0x4000>;
interrupts = <13>;
@@ -241,7 +241,7 @@
#clock-cells = <1>;
};
- spi3: cspi@53f84000 {
+ spi3: spi@53f84000 {
compatible = "fsl,imx31-cspi";
reg = <0x53f84000 0x4000>;
interrupts = <17>;
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 1c50b785cad4..a1c3d28e8771 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -133,7 +133,7 @@
status = "disabled";
};
- spi1: cspi@43fa4000 {
+ spi1: spi@43fa4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx35-cspi";
@@ -174,7 +174,7 @@
status = "disabled";
};
- spi2: cspi@50010000 {
+ spi2: spi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx35-cspi";
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index 7fae2ffb76fe..95b7fba58300 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -140,7 +140,7 @@
status = "disabled";
};
- ecspi1: ecspi@50010000 {
+ ecspi1: spi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
@@ -403,7 +403,7 @@
status = "disabled";
};
- ecspi2: ecspi@63fac000 {
+ ecspi2: spi@63fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
@@ -426,7 +426,7 @@
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
};
- cspi: cspi@63fc0000 {
+ cspi: spi@63fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index ba60b0cb3cc1..35ee1b4247c3 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -204,6 +204,7 @@
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,mc13xxx-uses-adc;
fsl,mc13xxx-uses-rtc;
regulators {
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index 469cce2c0357..e45a15ceb94b 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -508,7 +508,7 @@
};
ds1341: rtc@68 {
- compatible = "maxim,ds1341";
+ compatible = "dallas,ds1341";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
index 26cf08549df4..243d1c8cab0a 100644
--- a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
+++ b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
@@ -342,6 +342,14 @@
vcc-supply = <&vusb2_reg>;
};
+&vpu {
+ status = "disabled";
+};
+
+&wdog1 {
+ status = "disabled";
+};
+
&iomuxc {
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
index e6ebac8f43e4..14b207778114 100644
--- a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
+++ b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
@@ -350,6 +350,10 @@
vcc-supply = <&vusb2_reg>;
};
+&vpu {
+ status = "disabled";
+};
+
&wdog1 {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 5c4ba91e43ba..67d462715048 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -197,7 +197,7 @@
status = "disabled";
};
- ecspi1: ecspi@70010000 {
+ ecspi1: spi@70010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-ecspi";
@@ -464,7 +464,7 @@
status = "disabled";
};
- ecspi2: ecspi@83fac000 {
+ ecspi2: spi@83fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-ecspi";
@@ -487,7 +487,7 @@
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
};
- cspi: cspi@83fc0000 {
+ cspi: spi@83fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
@@ -608,7 +608,7 @@
status = "disabled";
};
- vpu@83ff4000 {
+ vpu: vpu@83ff4000 {
compatible = "fsl,imx51-vpu", "cnm,codahx4";
reg = <0x83ff4000 0x1000>;
interrupts = <9>;
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index cdb90bee7b4a..b560ff88459b 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -319,7 +319,6 @@
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
- num-chipselects = <1>;
cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 6386185ae234..207eb557c90e 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -259,7 +259,7 @@
status = "disabled";
};
- ecspi1: ecspi@50010000 {
+ ecspi1: spi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -684,7 +684,7 @@
status = "disabled";
};
- ecspi2: ecspi@63fac000 {
+ ecspi2: spi@63fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -707,7 +707,7 @@
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
};
- cspi: cspi@63fc0000 {
+ cspi: spi@63fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index 9de45a717356..d08e0402793b 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -146,7 +146,7 @@
&ecspi4 {
status = "okay";
- mcp251x0: mcp251x@1 {
+ mcp251x0: mcp251x@0 {
compatible = "microchip,mcp2515";
reg = <0>;
clocks = <&clk16m>;
diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
index bf53f0552aa1..e43bccb78ab2 100644
--- a/arch/arm/boot/dts/imx6dl-icore-mipi.dts
+++ b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2018 Engicam S.r.l.
* Copyright (C) 2018 Amarula Solutions B.V.
diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
index 1281bc39b7ab..73d710d34b9d 100644
--- a/arch/arm/boot/dts/imx6dl-icore-rqs.dts
+++ b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts
index 971f9fc39c66..80fa60607ab1 100644
--- a/arch/arm/boot/dts/imx6dl-icore.dts
+++ b/arch/arm/boot/dts/imx6dl-icore.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index dd3226fe5ecd..8e51491e68cf 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -84,6 +84,10 @@
status = "okay";
};
+&clks {
+ fsl,pmic-stby-poweroff;
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
@@ -164,6 +168,7 @@
reg = <0x08>;
interrupt-parent = <&gpio5>;
interrupts = <16 8>;
+ fsl,pmic-stby-poweroff;
regulators {
reg_vddcore: sw1ab { /* VDDARM_IN */
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
index 707ac9a46115..0edd3043d9c1 100644
--- a/arch/arm/boot/dts/imx6q-apalis-eval.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts
@@ -196,6 +196,8 @@
};
&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reset_moci>;
/* active-high meaning opposite of regular PERST# active-low polarity */
reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
reset-gpio-active-high;
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
index 4e1c8feaef82..b94bb687be6b 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
@@ -196,6 +196,8 @@
};
&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reset_moci>;
/* active-high meaning opposite of regular PERST# active-low polarity */
reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
reset-gpio-active-high;
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index 469e3d0e2827..302fd6adc8a7 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -200,6 +200,8 @@
};
&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reset_moci>;
/* active-high meaning opposite of regular PERST# active-low polarity */
reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
reset-gpio-active-high;
diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/imx6q-icore-mipi.dts
index 95b2efda17b4..d51745268dbf 100644
--- a/arch/arm/boot/dts/imx6q-icore-mipi.dts
+++ b/arch/arm/boot/dts/imx6q-icore-mipi.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2017 Engicam S.r.l.
* Copyright (C) 2017 Amarula Solutions B.V.
@@ -8,10 +8,10 @@
/dts-v1/;
#include "imx6q.dtsi"
-#include "imx6qdl-icore.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
/ {
- model = "Engicam i.CoreM6 Quad/Dual MIPI Starter Kit";
+ model = "Engicam i.CoreM6 1.5 Quad/Dual MIPI Starter Kit";
compatible = "engicam,imx6-icore", "fsl,imx6q";
};
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
index 49b60ca20e6d..81cc346dd149 100644
--- a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
index 6e27c8143f82..241811c52b62 100644
--- a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts
index b81f48c6a8c6..cf6ba724f497 100644
--- a/arch/arm/boot/dts/imx6q-icore-rqs.dts
+++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts
@@ -1,42 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2015 Amarula Solutions B.V.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2015 Engicam S.r.l.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
index 5613dd9dc469..fe28c3cf54c0 100644
--- a/arch/arm/boot/dts/imx6q-icore.dts
+++ b/arch/arm/boot/dts/imx6q-icore.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 0193ee6fe964..8381d24eff7d 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -163,7 +163,7 @@
aips-bus@2000000 { /* AIPS1 */
spba-bus@2000000 {
- ecspi5: ecspi@2018000 {
+ ecspi5: spi@2018000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 05f07ea3e8c8..3dc99dd8dde1 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -482,10 +482,6 @@
};
&iomuxc {
- /* pins used on module */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reset_moci>;
-
pinctrl_apalis_gpio1: gpio2io04grp {
fsl,pins = <
MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
diff --git a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
new file mode 100644
index 000000000000..d91d46b5898f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jacopo Mondi <jacopo@jmondi.org>
+ */
+
+#include "imx6qdl-icore.dtsi"
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+ >;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET_REF>;
+ phy-mode = "rmii";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index acc3b11fba2a..ba93026ecee8 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -1,42 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2015 Amarula Solutions B.V.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2015 Engicam S.r.l.
*/
#include <dt-bindings/gpio/gpio.h>
@@ -316,7 +281,7 @@
};
&iomuxc {
- pinctrl_audmux: audmux {
+ pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 9ce993776160..84d03c65f4c8 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
@@ -310,7 +274,7 @@
};
&iomuxc {
- pinctrl_audmux: audmux {
+ pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0
@@ -349,7 +313,7 @@
>;
};
- pinctrl_gpmi_nand: gpmi-nand {
+ pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 9f11f1fcc3e6..a6dc5c42c632 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -4,6 +4,7 @@
// Copyright 2011 Linaro Ltd.
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
chosen {
@@ -25,6 +26,47 @@
};
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ home {
+ label = "Home";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ wakeup-source;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ wakeup-source;
+ };
+
+ program {
+ label = "Program";
+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PROGRAM>;
+ wakeup-source;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
+ };
+ };
+
clocks {
codec_osc: anaclk2 {
compatible = "fixed-clock";
@@ -375,6 +417,15 @@
VLC-supply = <&reg_audio>;
};
+ touchscreen@4 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_egalax_int>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+ };
};
&i2c3 {
@@ -410,6 +461,12 @@
>;
};
+ pinctrl_egalax_int: egalax-intgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0xb0b1
+ >;
+ };
+
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0
@@ -446,6 +503,16 @@
>;
};
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0
+ MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+ MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+ MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0
+ MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0
+ >;
+ };
+
pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 381bf61fcd28..b7d5fb421404 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -8,6 +8,10 @@
#include <dt-bindings/gpio/gpio.h>
/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
sound {
compatible = "fsl,imx6-wandboard-sgtl5000",
"fsl,imx-audio-sgtl5000";
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 7fff3717cf7c..85e79a33bcd4 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -813,6 +813,10 @@
status = "okay";
};
+&snvs_rtc {
+ status = "disabled";
+};
+
&ssi1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 61d2d26afbf4..e4daf150881a 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -317,7 +317,7 @@
status = "disabled";
};
- ecspi1: ecspi@2008000 {
+ ecspi1: spi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -331,7 +331,7 @@
status = "disabled";
};
- ecspi2: ecspi@200c000 {
+ ecspi2: spi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -345,7 +345,7 @@
status = "disabled";
};
- ecspi3: ecspi@2010000 {
+ ecspi3: spi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -359,7 +359,7 @@
status = "disabled";
};
- ecspi4: ecspi@2014000 {
+ ecspi4: spi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 7a4f5dace902..7a3ae7160c12 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -168,7 +168,7 @@
status = "disabled";
};
- ecspi1: ecspi@2008000 {
+ ecspi1: spi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
@@ -180,7 +180,7 @@
status = "disabled";
};
- ecspi2: ecspi@200c000 {
+ ecspi2: spi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
@@ -192,7 +192,7 @@
status = "disabled";
};
- ecspi3: ecspi@2010000 {
+ ecspi3: spi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
@@ -204,7 +204,7 @@
status = "disabled";
};
- ecspi4: ecspi@2014000 {
+ ecspi4: spi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 000e6136a9d6..ed9a980bce85 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -375,10 +375,12 @@
reg = <0x0209c000 0x4000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>;
};
gpio2: gpio@20a0000 {
@@ -386,10 +388,12 @@
reg = <0x020a0000 0x4000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO2>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 50 32>;
};
gpio3: gpio@20a4000 {
@@ -397,10 +401,14 @@
reg = <0x020a4000 0x4000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>,
+ <&iomuxc 16 101 2>, <&iomuxc 18 5 1>,
+ <&iomuxc 21 6 11>;
};
gpio4: gpio@20a8000 {
@@ -408,10 +416,20 @@
reg = <0x020a8000 0x4000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>,
+ <&iomuxc 16 151 1>, <&iomuxc 17 149 1>,
+ <&iomuxc 18 146 1>, <&iomuxc 19 144 1>,
+ <&iomuxc 20 142 1>, <&iomuxc 21 143 1>,
+ <&iomuxc 22 150 1>, <&iomuxc 23 148 1>,
+ <&iomuxc 24 147 1>, <&iomuxc 25 145 1>,
+ <&iomuxc 26 152 1>, <&iomuxc 27 125 1>,
+ <&iomuxc 28 131 1>, <&iomuxc 29 134 1>,
+ <&iomuxc 30 129 1>, <&iomuxc 31 133 1>;
};
gpio5: gpio@20ac000 {
@@ -419,10 +437,22 @@
reg = <0x020ac000 0x4000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO5>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>,
+ <&iomuxc 2 132 1>, <&iomuxc 3 130 1>,
+ <&iomuxc 4 127 1>, <&iomuxc 5 126 1>,
+ <&iomuxc 6 120 1>, <&iomuxc 7 123 1>,
+ <&iomuxc 8 118 1>, <&iomuxc 9 122 1>,
+ <&iomuxc 10 124 1>, <&iomuxc 11 117 1>,
+ <&iomuxc 12 121 1>, <&iomuxc 13 119 1>,
+ <&iomuxc 14 116 1>, <&iomuxc 15 115 1>,
+ <&iomuxc 16 140 2>, <&iomuxc 18 136 1>,
+ <&iomuxc 19 138 1>, <&iomuxc 20 139 1>,
+ <&iomuxc 21 137 1>;
};
gpio6: gpio@20b0000 {
@@ -430,6 +460,7 @@
reg = <0x020b0000 0x4000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO6>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index f8f31872fa14..53b3408b5fab 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -40,12 +40,14 @@
label = "Volume Up";
gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
};
volume-down {
label = "Volume Down";
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 844caa39364f..95a3c1cb877d 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -268,7 +268,7 @@
status = "disabled";
};
- ecspi1: ecspi@2008000 {
+ ecspi1: spi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -280,7 +280,7 @@
status = "disabled";
};
- ecspi2: ecspi@200c000 {
+ ecspi2: spi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -292,7 +292,7 @@
status = "disabled";
};
- ecspi3: ecspi@2010000 {
+ ecspi3: spi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -304,7 +304,7 @@
status = "disabled";
};
- ecspi4: ecspi@2014000 {
+ ecspi4: spi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -1079,7 +1079,7 @@
status = "disabled";
};
- qspi1: qspi@21e0000 {
+ qspi1: spi@21e0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-qspi";
@@ -1092,7 +1092,7 @@
status = "disabled";
};
- qspi2: qspi@21e4000 {
+ qspi2: spi@21e4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-qspi";
@@ -1273,7 +1273,7 @@
status = "disabled";
};
- ecspi5: ecspi@228c000 {
+ ecspi5: spi@228c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
new file mode 100644
index 000000000000..11966d12af76
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Digi International's ConnectCore6UL SBC Pro board device tree source
+ *
+ * Copyright 2018 Digi International, Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6ul.dtsi"
+#include "imx6ul-ccimx6ulsom.dtsi"
+
+/ {
+ model = "Digi International ConnectCore 6UL SBC Pro.";
+ compatible = "digi,ccimx6ulsbcpro", "digi,ccimx6ulsom", "fsl,imx6ul";
+
+ lcd_backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm5 0 50000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&adc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc1>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <&ext_3v3>;
+ status = "okay";
+};
+
+/* CAN2 is multiplexed with UART2 RTS/CTS */
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <&ext_3v3>;
+ status = "disabled";
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_master>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-handle = <&ethphy0>;
+ status = "okay";
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
+ phy-mode = "rmii";
+ phy-handle = <&ethphy1>;
+ phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <26>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ smsc,disable-energy-detect;
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ smsc,disable-energy-detect;
+ reg = <1>;
+ };
+ };
+};
+
+&gpio5 {
+ emmc-usd-mux {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_LOW>;
+ output-high;
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat0_17
+ &pinctrl_lcdif_clken
+ &pinctrl_lcdif_hvsync>;
+ lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */
+ status = "okay";
+};
+
+&ldo4_ext {
+ regulator-max-microvolt = <1800000>;
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&pwm5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm5>;
+ status = "okay";
+};
+
+&pwm6 {
+ status = "okay";
+};
+
+&pwm7 {
+ status = "okay";
+};
+
+&pwm8 {
+ status = "okay";
+};
+
+&sai2 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_sai2>;
+ pinctrl-1 = <&pinctrl_sai2_sleep>;
+ assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+ <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>,
+ <&clks IMX6UL_CLK_SAI2>;
+ assigned-clock-rates = <0>, <786432000>, <12288000>;
+ assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+ status = "okay";
+};
+
+/* UART2 RTS/CTS muxed with CAN2 */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_4wires>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+/* UART3 RTS/CTS muxed with CAN 1 */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_2wires>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ vbus-supply = <&reg_usb_otg1_vbus>;
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+/* USDHC2 (microSD conflicts with eMMC) */
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ no-1-8-v;
+ broken-cd; /* no carrier detect line (use polling) */
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_adc1: adc1grp {
+ fsl,pins = <
+ /* EXP_GPIO_2 -> GPIO1_3/ADC1_IN3 */
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
+ >;
+ };
+
+ pinctrl_ecspi1_master: ecspi1grp1 {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x10b0
+ MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x10b0
+ MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x10b0
+ MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x10b0
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x40017051
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x40017051
+ >;
+ };
+
+ pinctrl_enet2_mdio: mdioenet2grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp{
+ fsl,pins = <
+ MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
+ MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
+ >;
+ };
+ pinctrl_flexcan2: flexcan2grp{
+ fsl,pins = <
+ MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
+ MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
+ >;
+ };
+
+ pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ >;
+ };
+
+ pinctrl_lcdif_clken: lcdifctrlgrp1 {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x17050
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ >;
+ };
+
+ pinctrl_lcdif_hvsync: lcdifctrlgrp2 {
+ fsl,pins = <
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_pwm5: pwm5grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_DQS__PWM5_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088
+ MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088
+ MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088
+ MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
+ MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
+ /* Interrupt */
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x10b0
+ >;
+ };
+
+ pinctrl_sai2_sleep: sai2grp-sleep {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x3000
+ MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x3000
+ MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x3000
+ MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x3000
+ /* Interrupt */
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x3000
+ >;
+ };
+
+ pinctrl_uart2_4wires: uart2grp-4wires {
+ fsl,pins = <
+ MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1
+ MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3_2wires: uart3grp-2wires {
+ fsl,pins = <
+ MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059
+ MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10039
+ MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059
+ MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059
+ MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059
+ MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059
+ /* Mux selector between eMMC/SD# */
+ MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x79
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x17059
+ MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x17059
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts
index d81d20f8fc8d..e22ec5be2b78 100644
--- a/arch/arm/boot/dts/imx6ul-geam.dts
+++ b/arch/arm/boot/dts/imx6ul-geam.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -328,7 +292,7 @@
>;
};
- pinctrl_gpmi_nand: gpmi-nand {
+ pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
index f5b422898e61..1df3e376ae2c 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
+++ b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -50,28 +14,5 @@
};
&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
- bus-width = <8>;
- no-1-8-v;
status = "okay";
};
-
-&iomuxc {
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070
- MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070
- MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070
- MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070
- MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070
- MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070
- MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070
- MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070
- MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070
- MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070
- MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070
- >;
- };
-};
diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
index de15e1c75dd1..8c26d4d1a7bf 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-nand.dts
+++ b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -50,30 +14,5 @@
};
&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand>;
- nand-on-flash-bbt;
status = "okay";
};
-
-&iomuxc {
- pinctrl_gpmi_nand: gpmi-nand {
- fsl,pins = <
- MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
- MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
- MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
- MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
- MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
- MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
- MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
- MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
- MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
- MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
- MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
- MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
- MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
- MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
- MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
- >;
- };
-};
diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi
index cd9928551154..b1fa3f0a684d 100644
--- a/arch/arm/boot/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
@@ -133,6 +97,13 @@
};
};
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ status = "disabled";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -243,6 +214,15 @@
status = "okay";
};
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+ bus-width = <8>;
+ no-1-8-v;
+ status = "disabled";
+};
+
&iomuxc {
pinctrl_enet1: enet1grp {
fsl,pins = <
@@ -259,6 +239,26 @@
>;
};
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
+ MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
+ MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
+ MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
+ MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
+ MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
+ MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
+ MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
+ MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
+ MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
+ MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
+ MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
+ MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
+ MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
+ MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
@@ -366,4 +366,20 @@
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
>;
};
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070
+ MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070
+ >;
+ };
};
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 6dc0b569acdf..083d3446c41d 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -89,6 +89,8 @@
"pll1_sys";
arm-supply = <&reg_arm>;
soc-supply = <&reg_soc>;
+ nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cell-names = "speed_grade";
};
};
@@ -156,7 +158,6 @@
compatible = "arm,cortex-a7-pmu";
interrupt-parent = <&gpc>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
};
soc {
@@ -218,7 +219,7 @@
reg = <0x02000000 0x40000>;
ranges;
- ecspi1: ecspi@2008000 {
+ ecspi1: spi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -230,7 +231,7 @@
status = "disabled";
};
- ecspi2: ecspi@200c000 {
+ ecspi2: spi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -242,7 +243,7 @@
status = "disabled";
};
- ecspi3: ecspi@2010000 {
+ ecspi3: spi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -254,7 +255,7 @@
status = "disabled";
};
- ecspi4: ecspi@2014000 {
+ ecspi4: spi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -918,6 +919,17 @@
reg = <0x021b0000 0x4000>;
};
+ weim: weim@21b8000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
+ reg = <0x021b8000 0x4000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_EIM>;
+ fsl,weim-cs-gpr = <&gpr>;
+ status = "disabled";
+ };
+
ocotp: ocotp-ctrl@21bc000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -932,6 +944,10 @@
tempmon_temp_grade: temp-grade@20 {
reg = <0x20 4>;
};
+
+ cpu_speed_grade: speed-grade@10 {
+ reg = <0x10 4>;
+ };
};
lcdif: lcdif@21c8000 {
@@ -945,7 +961,7 @@
status = "disabled";
};
- qspi: qspi@21e0000 {
+ qspi: spi@21e0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
index 30ef60344af3..0ba64546c13b 100644
--- a/arch/arm/boot/dts/imx6ull-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
@@ -45,7 +45,7 @@
#include "imx6ul-14x14-evk.dtsi"
/ {
- model = "Freescale i.MX6 UlltraLite 14x14 EVK Board";
+ model = "Freescale i.MX6 UltraLiteLite 14x14 EVK Board";
compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
};
diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h
index fdc46bb09cc1..a282a31a4bae 100644
--- a/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ b/arch/arm/boot/dts/imx6ull-pinfunc.h
@@ -14,14 +14,38 @@
* The pin function ID is a tuple of
* <mux_reg conf_reg input_reg mux_mode input_val>
*/
+/* signals common for i.MX6UL and i.MX6ULL */
+#undef MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6
+#undef MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7
+#undef MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5
+#undef MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6
+#undef MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS
+#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7
+
+/* signals for i.MX6ULL only */
+#define MX6ULL_PAD_UART1_TX_DATA__UART5_DCE_TX 0x0084 0x0310 0x0000 0x9 0x0
#define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX 0x0084 0x0310 0x0644 0x9 0x4
#define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX 0x0088 0x0314 0x0644 0x9 0x5
-#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_RTS 0x008C 0x0318 0x0640 0x9 0x3
-#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_RTS 0x0090 0x031C 0x0640 0x9 0x4
-#define MX6ULL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6
-#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7
-#define MX6ULL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5
-#define MX6ULL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6
+#define MX6ULL_PAD_UART1_RX_DATA__UART5_DTE_TX 0x0088 0x0314 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_CTS 0x008C 0x0318 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_CTS_B__UART5_DTE_RTS 0x008C 0x0318 0x0640 0x9 0x3
+#define MX6ULL_PAD_UART1_RTS_B__UART5_DCE_RTS 0x0090 0x031C 0x0640 0x9 0x4
+#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_CTS 0x0090 0x031C 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART4_RX_DATA__EPDC_PWRCTRL01 0x00B8 0x0344 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_TX_DATA__EPDC_PWRCTRL02 0x00BC 0x0348 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_RX_DATA__EPDC_PWRCTRL03 0x00C0 0x034C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_DATA0__EPDC_SDCE04 0x00C4 0x0350 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_DATA1__EPDC_SDCE05 0x00C8 0x0354 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_EN__EPDC_SDCE06 0x00CC 0x0358 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_DATA0__EPDC_SDCE07 0x00D0 0x035C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_DATA1__EPDC_SDCE08 0x00D4 0x0360 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_EN__EPDC_SDCE09 0x00D8 0x0364 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_CLK__EPDC_SDOED 0x00DC 0x0368 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_ER__EPDC_SDOEZ 0x00E0 0x036C 0x0000 0x9 0x0
#define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0
#define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0
#define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0
@@ -48,6 +72,8 @@
#define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK 0x0158 0x03E4 0x0000 0x9 0x0
#define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP 0x015C 0x03E8 0x0000 0x9 0x0
#define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1 0x016C 0x03F8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA22__EPDC_SDCE02 0x0170 0x03FC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA23__EPDC_SDCE03 0x0174 0x0400 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2 0x01D4 0x0460 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3 0x01D8 0x0464 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1 0x01DC 0x0468 0x0000 0x9 0x0
@@ -55,7 +81,6 @@
#define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7
#define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index cd1776a7015a..796ed35d4ac9 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -22,7 +22,7 @@
>;
fsl,soc-operating-points = <
/* KHz uV */
- 900000 1175000
+ 900000 1250000
792000 1175000
528000 1175000
396000 1175000
diff --git a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
new file mode 100644
index 000000000000..6f1af240e0ce
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+/dts-v1/;
+
+#include "imx6ulz.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
+
+/delete-node/ &fec1;
+/delete-node/ &fec2;
+/delete-node/ &lcdif;
+/delete-node/ &tsc;
+
+/ {
+ model = "Freescale i.MX6 ULZ 14x14 EVK Board";
+ compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
+
+ /delete-node/ panel;
+};
diff --git a/arch/arm/boot/dts/imx6ulz.dtsi b/arch/arm/boot/dts/imx6ulz.dtsi
new file mode 100644
index 000000000000..ae6d7e593769
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ulz.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+#include "imx6ull.dtsi"
+
+/ {
+ aliases {
+ /delete-property/ ethernet0;
+ /delete-property/ ethernet1;
+ /delete-property/ i2c2;
+ /delete-property/ i2c3;
+ /delete-property/ serial4;
+ /delete-property/ serial5;
+ /delete-property/ serial6;
+ /delete-property/ serial7;
+ /delete-property/ spi2;
+ /delete-property/ spi3;
+ };
+};
+
+/delete-node/ &adc1;
+/delete-node/ &can1;
+/delete-node/ &can2;
+/delete-node/ &ecspi3;
+/delete-node/ &ecspi4;
+/delete-node/ &epit2;
+/delete-node/ &gpt2;
+/delete-node/ &i2c3;
+/delete-node/ &i2c4;
+/delete-node/ &pwm5;
+/delete-node/ &pwm6;
+/delete-node/ &pwm7;
+/delete-node/ &pwm8;
+/delete-node/ &uart5;
+/delete-node/ &uart6;
+/delete-node/ &uart7;
+/delete-node/ &uart8;
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index c9b3c60b0eb2..f1bafdaa7e1a 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -27,12 +27,14 @@
label = "Volume Up";
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
};
volume-down {
label = "Volume Down";
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index efbdeaaa8dcd..826224bf7f4f 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -20,6 +20,7 @@
reg = <1>;
clock-frequency = <996000000>;
operating-points-v2 = <&cpu0_opp_table>;
+ cpu-idle-states = <&cpu_sleep_wait>;
};
};
@@ -63,9 +64,11 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etm1_out_port: endpoint {
- remote-endpoint = <&ca_funnel_in_port1>;
+ out-ports {
+ port {
+ etm1_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port1>;
+ };
};
};
};
@@ -153,11 +156,13 @@
};
};
-&ca_funnel_ports {
+&ca_funnel_in_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port@1 {
reg = <1>;
ca_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out_port>;
};
};
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index fa390da636de..f7ba2c0a24ad 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -1,44 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2016 NXP Semiconductors.
* Author: Fabio Estevam <fabio.estevam@nxp.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -216,6 +179,13 @@
status = "okay";
};
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
&i2c4 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -346,6 +316,13 @@
>;
};
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
+ >;
+ };
+
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index a052198f6e96..aa8df7d93b2e 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -54,6 +54,19 @@
#address-cells = <1>;
#size-cells = <0>;
+ idle-states {
+ entry-method = "psci";
+
+ cpu_sleep_wait: cpu-sleep-wait {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <100>;
+ exit-latency-us = <50>;
+ min-residency-us = <1000>;
+ };
+ };
+
cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
@@ -61,6 +74,7 @@
clock-frequency = <792000000>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clks IMX7D_CLK_ARM>;
+ cpu-idle-states = <&cpu_sleep_wait>;
};
};
@@ -106,7 +120,7 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
/* replicator output ports */
@@ -123,12 +137,11 @@
remote-endpoint = <&etr_in_port>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etf_out_port>;
};
};
@@ -168,28 +181,23 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ca_funnel_ports: ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel input ports */
- port@0 {
- reg = <0>;
+ ca_funnel_in_ports: in-ports {
+ port {
ca_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out_port>;
};
};
- /* funnel output port */
- port@2 {
- reg = <0>;
+ /* the other input ports are not connect to anything */
+ };
+
+ out-ports {
+ port {
ca_funnel_out_port0: endpoint {
remote-endpoint = <&hugo_funnel_in_port0>;
};
};
- /* the other input ports are not connect to anything */
};
};
@@ -200,9 +208,11 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etm0_out_port: endpoint {
- remote-endpoint = <&ca_funnel_in_port0>;
+ out-ports {
+ port {
+ etm0_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port0>;
+ };
};
};
};
@@ -213,15 +223,13 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel input ports */
port@0 {
reg = <0>;
hugo_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ca_funnel_out_port0>;
};
};
@@ -229,18 +237,18 @@
port@1 {
reg = <1>;
hugo_funnel_in_port1: endpoint {
- slave-mode; /* M4 input */
+ /* M4 input */
};
};
+ /* the other input ports are not connect to anything */
+ };
- port@2 {
- reg = <0>;
+ out-ports {
+ port {
hugo_funnel_out_port0: endpoint {
remote-endpoint = <&etf_in_port>;
};
};
-
- /* the other input ports are not connect to anything */
};
};
@@ -250,20 +258,16 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf_in_port: endpoint {
- slave-mode;
remote-endpoint = <&hugo_funnel_out_port0>;
};
};
+ };
- port@1 {
- reg = <0>;
+ out-ports {
+ port {
etf_out_port: endpoint {
remote-endpoint = <&replicator_in_port0>;
};
@@ -277,10 +281,11 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etr_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ etr_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
@@ -291,10 +296,11 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
@@ -563,14 +569,6 @@
clock-names = "snvs-rtc";
};
- snvs_poweroff: snvs-poweroff {
- compatible = "syscon-poweroff";
- regmap = <&snvs>;
- offset = <0x38>;
- value = <0x60>;
- mask = <0x60>;
- };
-
snvs_pwrkey: snvs-powerkey {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
@@ -644,7 +642,7 @@
status = "disabled";
};
- ecspi4: ecspi@30630000 {
+ ecspi4: spi@30630000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
@@ -725,7 +723,7 @@
reg = <0x30800000 0x100000>;
ranges;
- ecspi1: ecspi@30820000 {
+ ecspi1: spi@30820000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
@@ -737,7 +735,7 @@
status = "disabled";
};
- ecspi2: ecspi@30830000 {
+ ecspi2: spi@30830000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
@@ -749,7 +747,7 @@
status = "disabled";
};
- ecspi3: ecspi@30840000 {
+ ecspi3: spi@30840000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
@@ -974,6 +972,25 @@
status = "disabled";
};
+ mu0a: mailbox@30aa0000 {
+ compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
+ reg = <0x30aa0000 0x10000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_MU_ROOT_CLK>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ mu0b: mailbox@30ab0000 {
+ compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
+ reg = <0x30ab0000 0x10000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_MU_ROOT_CLK>;
+ #mbox-cells = <2>;
+ fsl,mu-side-b;
+ status = "disabled";
+ };
+
usbotg1: usb@30b10000 {
compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
reg = <0x30b10000 0x200>;
diff --git a/arch/arm/boot/dts/imx7ulp-pinfunc.h b/arch/arm/boot/dts/imx7ulp-pinfunc.h
index fe511775b518..85f6b017803a 100644
--- a/arch/arm/boot/dts/imx7ulp-pinfunc.h
+++ b/arch/arm/boot/dts/imx7ulp-pinfunc.h
@@ -116,6 +116,7 @@
#define IMX7ULP_PAD_PTC13__LPI2C7_SDA 0x0034 0x030c 0x5 0x1
#define IMX7ULP_PAD_PTC13__TPM7_CLKIN 0x0034 0x02f4 0x6 0x1
#define IMX7ULP_PAD_PTC13__FB_AD13 0x0034 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC13__USB0_ID 0x0034 0x0338 0xb 0x1
#define IMX7ULP_PAD_PTC14__PTC14 0x0038 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTC14__TRACE_D1 0x0038 0x0000 0xa 0x0
#define IMX7ULP_PAD_PTC14__FXIO1_D10 0x0038 0x022c 0x2 0x1
@@ -136,6 +137,7 @@
#define IMX7ULP_PAD_PTC16__LPSPI3_SIN 0x0040 0x0324 0x3 0x1
#define IMX7ULP_PAD_PTC16__TPM7_CH2 0x0040 0x02e4 0x6 0x1
#define IMX7ULP_PAD_PTC16__FB_ALE_FB_CS1_B_FB_TS_B 0x0040 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC16__USB1_OC2 0x0040 0x0334 0xb 0x1
#define IMX7ULP_PAD_PTC17__PTC17 0x0044 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTC17__FXIO1_D13 0x0044 0x0238 0x2 0x1
#define IMX7ULP_PAD_PTC17__LPSPI3_SOUT 0x0044 0x0328 0x3 0x1
@@ -146,11 +148,16 @@
#define IMX7ULP_PAD_PTC18__LPSPI3_SCK 0x0048 0x0320 0x3 0x1
#define IMX7ULP_PAD_PTC18__TPM6_CH0 0x0048 0x02d0 0x6 0x1
#define IMX7ULP_PAD_PTC18__FB_OE_B 0x0048 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC18__USB0_ID 0x0048 0x0338 0xb 0x2
+#define IMX7ULP_PAD_PTC18__VIU_DE 0x0048 0x033c 0xc 0x1
#define IMX7ULP_PAD_PTC19__PTC19 0x004c 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTC19__FXIO1_D15 0x004c 0x0240 0x2 0x1
#define IMX7ULP_PAD_PTC19__LPSPI3_PCS0 0x004c 0x0310 0x3 0x1
#define IMX7ULP_PAD_PTC19__TPM6_CH1 0x004c 0x02d4 0x6 0x1
#define IMX7ULP_PAD_PTC19__FB_A16 0x004c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC19__USB0_ID 0x004c 0x0338 0xa 0x3
+#define IMX7ULP_PAD_PTC19__USB1_PWR2 0x004c 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTC19__VIU_DE 0x004c 0x033c 0xc 0x3
#define IMX7ULP_PAD_PTD0__PTD0 0x0080 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTD0__SDHC0_RESET_B 0x0080 0x0000 0x8 0x0
#define IMX7ULP_PAD_PTD1__PTD1 0x0084 0x0000 0x1 0x0
@@ -218,6 +225,7 @@
#define IMX7ULP_PAD_PTE5__LPI2C5_SDA 0x0114 0x02c0 0x5 0x2
#define IMX7ULP_PAD_PTE5__TPM5_CH0 0x0114 0x02c4 0x6 0x2
#define IMX7ULP_PAD_PTE5__SDHC1_D2 0x0114 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE5__VIU_DE 0x0114 0x033c 0xc 0x2
#define IMX7ULP_PAD_PTE6__PTE6 0x0118 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE6__FXIO1_D25 0x0118 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE6__LPSPI2_SCK 0x0118 0x02ac 0x3 0x2
@@ -226,8 +234,10 @@
#define IMX7ULP_PAD_PTE6__TPM7_CH3 0x0118 0x02e8 0x6 0x2
#define IMX7ULP_PAD_PTE6__SDHC1_D4 0x0118 0x0000 0x8 0x0
#define IMX7ULP_PAD_PTE6__FB_A17 0x0118 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE6__USB0_OC 0x0118 0x0330 0xb 0x1
#define IMX7ULP_PAD_PTE7__PTE7 0x011c 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE7__TRACE_D7 0x011c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE7__USB0_PWR 0x011c 0x0000 0xb 0x0
#define IMX7ULP_PAD_PTE7__VIU_FID 0x011c 0x0000 0xc 0x0
#define IMX7ULP_PAD_PTE7__FXIO1_D24 0x011c 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE7__LPSPI2_PCS0 0x011c 0x029c 0x3 0x2
@@ -278,6 +288,7 @@
#define IMX7ULP_PAD_PTE11__FB_A20 0x012c 0x0000 0x9 0x0
#define IMX7ULP_PAD_PTE12__PTE12 0x0130 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE12__TRACE_D2 0x0130 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE12__USB1_OC2 0x0130 0x0334 0xb 0x2
#define IMX7ULP_PAD_PTE12__VIU_D20 0x0130 0x0000 0xc 0x0
#define IMX7ULP_PAD_PTE12__FXIO1_D19 0x0130 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE12__LPSPI3_SIN 0x0130 0x0324 0x3 0x2
@@ -288,6 +299,7 @@
#define IMX7ULP_PAD_PTE12__FB_A21 0x0130 0x0000 0x9 0x0
#define IMX7ULP_PAD_PTE13__PTE13 0x0134 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE13__TRACE_D1 0x0134 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE13__USB1_PWR2 0x0134 0x0000 0xb 0x0
#define IMX7ULP_PAD_PTE13__VIU_D21 0x0134 0x0000 0xc 0x0
#define IMX7ULP_PAD_PTE13__FXIO1_D18 0x0134 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE13__LPSPI3_SOUT 0x0134 0x0328 0x3 0x2
@@ -298,6 +310,7 @@
#define IMX7ULP_PAD_PTE13__FB_A22 0x0134 0x0000 0x9 0x0
#define IMX7ULP_PAD_PTE14__PTE14 0x0138 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE14__TRACE_D0 0x0138 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE14__USB0_OC 0x0138 0x0330 0xb 0x2
#define IMX7ULP_PAD_PTE14__VIU_D22 0x0138 0x0000 0xc 0x0
#define IMX7ULP_PAD_PTE14__FXIO1_D17 0x0138 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE14__LPSPI3_SCK 0x0138 0x0320 0x3 0x2
@@ -308,6 +321,7 @@
#define IMX7ULP_PAD_PTE14__FB_A23 0x0138 0x0000 0x9 0x0
#define IMX7ULP_PAD_PTE15__PTE15 0x013c 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE15__TRACE_CLKOUT 0x013c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE15__USB0_PWR 0x013c 0x0000 0xb 0x0
#define IMX7ULP_PAD_PTE15__VIU_D23 0x013c 0x0000 0xc 0x0
#define IMX7ULP_PAD_PTE15__FXIO1_D16 0x013c 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE15__LPSPI3_PCS0 0x013c 0x0310 0x3 0x2
@@ -315,7 +329,7 @@
#define IMX7ULP_PAD_PTE15__TPM6_CH1 0x013c 0x02d4 0x6 0x2
#define IMX7ULP_PAD_PTE15__FB_A24 0x013c 0x0000 0x9 0x0
#define IMX7ULP_PAD_PTF0__PTF0 0x0180 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF0__VIU_DE 0x0180 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF0__VIU_DE 0x0180 0x033c 0xc 0x0
#define IMX7ULP_PAD_PTF0__LPUART4_CTS_B 0x0180 0x0244 0x4 0x3
#define IMX7ULP_PAD_PTF0__LPI2C4_SCL 0x0180 0x0278 0x5 0x3
#define IMX7ULP_PAD_PTF0__TPM4_CLKIN 0x0180 0x0298 0x6 0x3
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 5cae74eb6cdd..ca9154dd8052 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -160,10 +160,6 @@
clock-frequency = <100000000>;
};
-&pciec {
- status = "okay";
-};
-
&pfc {
can0_pins: can0 {
groups = "can0_data_d";
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 738b44cf2b0b..1c833105d6c5 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -416,7 +416,7 @@
clock-names = "fck", "mmchsdb_fck";
};
- qspi: qspi@2940000 {
+ qspi: spi@2940000 {
compatible = "ti,k2g-qspi", "cdns,qspi-nor";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index abff7ef7c9cd..b7303a4e4236 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -179,7 +179,7 @@
* ssp0 and spi1 are shared pins;
* enable one in your board dts, as needed.
*/
- ssp0: ssp@20084000 {
+ ssp0: spi@20084000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x20084000 0x1000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
@@ -199,7 +199,7 @@
* ssp1 and spi2 are shared pins;
* enable one in your board dts, as needed.
*/
- ssp1: ssp@2008c000 {
+ ssp1: spi@2008c000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x2008c000 0x1000>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 499f41a2c6f0..923a25760516 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -1,5 +1,6 @@
/*
* Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -235,6 +236,7 @@
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
+ big-endian;
bank-width = <2>;
device-width = <1>;
};
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index f0c949d74833..8b48c3c7cd21 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -1,5 +1,6 @@
/*
* Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -203,6 +204,7 @@
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
+ big-endian;
bank-width = <2>;
device-width = <1>;
};
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index f18490548c78..bdd6e66a79ad 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -163,7 +163,7 @@
big-endian;
};
- qspi: quadspi@1550000 {
+ qspi: spi@1550000 {
compatible = "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -330,7 +330,7 @@
};
};
- dspi0: dspi@2100000 {
+ dspi0: spi@2100000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -343,7 +343,7 @@
status = "disabled";
};
- dspi1: dspi@2110000 {
+ dspi1: spi@2110000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -364,6 +364,8 @@
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 1>;
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 39>, <&edma0 1 38>;
status = "disabled";
};
@@ -375,6 +377,8 @@
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 1>;
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 37>, <&edma0 1 36>;
status = "disabled";
};
@@ -386,6 +390,8 @@
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 1>;
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 35>, <&edma0 1 34>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index d77dcf890cfc..7162e0ca05b0 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -194,7 +194,7 @@
#clock-cells = <1>;
#reset-cells = <1>;
compatible = "amlogic,meson8-clkc";
- reg = <0x8000 0x4>, <0x4000 0x460>;
+ reg = <0x8000 0x4>, <0x4000 0x400>;
};
reset: reset-controller@4404 {
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
new file mode 100644
index 000000000000..0872f6e3abf5
--- /dev/null
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "meson8b.dtsi"
+
+/ {
+ model = "Endless Computers Endless Mini";
+ compatible = "endless,ec100", "amlogic,meson8b";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ pal-switch {
+ label = "pal";
+ linux,input-type = <EV_SW>;
+ linux,code = <KEY_SWITCHVIDEOMODE>;
+ gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
+ };
+
+ ntsc-switch {
+ label = "ntsc";
+ linux,input-type = <EV_SW>;
+ linux,code = <KEY_SWITCHVIDEOMODE>;
+ gpios = <&gpio GPIOH_8 GPIO_ACTIVE_HIGH>;
+ };
+
+ power-button {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio GPIOH_9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ /*
+ * shutdown is managed by the EC (embedded micro-controller)
+ * which is configured through GPIOAO_2 (poweroff GPIO) and
+ * GPIOAO_7 (power LED, which has to go LOW as well).
+ */
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+ timeout-ms = <20000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "ec100:red:power";
+ /*
+ * Needs to go LOW (together with the poweroff GPIO)
+ * during shutdown to allow the EC (embedded
+ * micro-controller) to shutdown the system. Setting
+ * the output to LOW signals the EC to start a
+ * "breathing"/pulsing effect until the power is fully
+ * turned off.
+ */
+ gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vcc_5v: regulator-vcc5v {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC5V";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcck: regulator-vcck {
+ compatible = "pwm-regulator";
+
+ regulator-name = "VCCK";
+ regulator-min-microvolt = <860000>;
+ regulator-max-microvolt = <1140000>;
+
+ pwms = <&pwm_cd 0 1148 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_1v8: regulator-vcc1v8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc_3v3: regulator-vcc3v3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vcck>;
+};
+
+&ethmac {
+ status = "okay";
+
+ pinctrl-0 = <&eth_rmii_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&eth_phy0>;
+ phy-mode = "rmii";
+
+ snps,reset-gpio = <&gpio GPIOH_4 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ /* IC Plus IP101A/G (0x02430c54) */
+ reg = <0>;
+ };
+ };
+};
+
+&i2c_A {
+ status = "okay";
+ pinctrl-0 = <&i2c_a_pins>;
+ pinctrl-names = "default";
+
+ rt5640: codec@1c {
+ compatible = "realtek,rt5640";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */
+ realtek,in1-differential;
+ };
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vcc_1v8>;
+};
+
+&sdio {
+ status = "okay";
+
+ pinctrl-0 = <&sd_b_pins>;
+ pinctrl-names = "default";
+
+ /* SD card */
+ sd_card_slot: slot@1 {
+ compatible = "mmc-slot";
+ reg = <1>;
+ status = "okay";
+
+ bus-width = <4>;
+ no-sdio;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vcc_3v3>;
+ };
+};
+
+&pwm_cd {
+ status = "okay";
+ pinctrl-0 = <&pwm_c1_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_XTAL>;
+ clock-names = "clkin0";
+};
+
+/* exposed through the pin headers labeled "URDUG1" on the top of the PCB */
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+/*
+ * connected to the Bluetooth part of the RTL8723BS SDIO wifi / Bluetooth
+ * combo chip. This is only available on the variant with 2GB RAM.
+ */
+&uart_B {
+ status = "okay";
+ pinctrl-0 = <&uart_b0_pins>, <&uart_b0_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+};
+
+&usb1 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&usb1_phy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index ef3177d3da3d..58669abda259 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -57,6 +57,10 @@
mmc0 = &sd_card_slot;
};
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
memory {
reg = <0x40000000 0x40000000>;
};
@@ -71,6 +75,14 @@
};
};
+ p5v0: regulator-p5v0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "P5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
tflash_vdd: regulator-tflash_vdd {
/*
* signal name from schematics: TFLASH_VDD_EN
@@ -81,6 +93,8 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3>;
+
gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -92,6 +106,8 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3>;
+
/*
* signal name from schematics: TF_3V3N_1V8_EN
*/
@@ -101,6 +117,86 @@
states = <3300000 0
1800000 1>;
};
+
+ vcc_1v8: regulator-vcc-1v8 {
+ /*
+ * RICHTEK RT9179 configured for a fixed output voltage of
+ * 1.8V. This supplies not only VCC1V8 but also IOREF_1V8 and
+ * VDD1V8 according to the schematics.
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ vin-supply = <&p5v0>;
+ };
+
+ vcc_3v3: regulator-vcc-3v3 {
+ /*
+ * Monolithic Power Systems MP2161 configured for a fixed
+ * output voltage of 3.3V. This supplies not only VCC3V3 but
+ * also VDD3V3 and VDDIO_AO3V3 according to the schematics.
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ vin-supply = <&p5v0>;
+ };
+
+ vcck: regulator-vcck {
+ /* Monolithic Power Systems MP2161 */
+ compatible = "pwm-regulator";
+
+ regulator-name = "VCCK";
+ regulator-min-microvolt = <860000>;
+ regulator-max-microvolt = <1140000>;
+
+ vin-supply = <&p5v0>;
+
+ pwms = <&pwm_cd 0 12218 0>;
+ pwm-dutycycle-range = <91 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddc_ddr: regulator-vddc-ddr {
+ /*
+ * Monolithic Power Systems MP2161 configured for a fixed
+ * output voltage of 1.5V. This supplies not only DDR_VDDC but
+ * also DDR3_1V5 according to the schematics.
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "DDR_VDDC";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ vin-supply = <&p5v0>;
+ };
+
+ vdd_rtc: regulator-vdd-rtc {
+ /*
+ * Torex Semiconductor XC6215 configured for a fixed output of
+ * 0.9V.
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDD_RTC";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ vin-supply = <&vcc_3v3>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vcck>;
};
&ethmac {
@@ -154,6 +250,11 @@
pinctrl-names = "default";
};
+&saradc {
+ status = "okay";
+ vref-supply = <&vcc_1v8>;
+};
+
&sdio {
status = "okay";
@@ -180,6 +281,14 @@
};
};
+&pwm_cd {
+ status = "okay";
+ pinctrl-0 = <&pwm_c1_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_XTAL>;
+ clock-names = "clkin0";
+};
+
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 08f7f6be7254..cd1ca9dda126 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -163,7 +163,7 @@
#clock-cells = <1>;
#reset-cells = <1>;
compatible = "amlogic,meson8b-clkc";
- reg = <0x8000 0x4>, <0x4000 0x460>;
+ reg = <0x8000 0x4>, <0x4000 0x400>;
};
reset: reset-controller@4404 {
@@ -223,6 +223,28 @@
};
};
+ eth_rmii_pins: eth-rmii {
+ mux {
+ groups = "eth_tx_en",
+ "eth_txd1_0",
+ "eth_txd0_0",
+ "eth_rx_clk",
+ "eth_rx_dv",
+ "eth_rxd1",
+ "eth_rxd0",
+ "eth_mdio_en",
+ "eth_mdc";
+ function = "ethernet";
+ };
+ };
+
+ i2c_a_pins: i2c-a {
+ mux {
+ groups = "i2c_sda_a", "i2c_sck_a";
+ function = "i2c_a";
+ };
+ };
+
sd_b_pins: sd-b {
mux {
groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
@@ -230,6 +252,29 @@
function = "sd_b";
};
};
+
+ pwm_c1_pins: pwm-c1 {
+ mux {
+ groups = "pwm_c1";
+ function = "pwm_c";
+ };
+ };
+
+ uart_b0_pins: uart-b0 {
+ mux {
+ groups = "uart_tx_b0",
+ "uart_rx_b0";
+ function = "uart_b";
+ };
+ };
+
+ uart_b0_cts_rts_pins: uart-b0-cts-rts {
+ mux {
+ groups = "uart_cts_b0",
+ "uart_rts_b0";
+ function = "uart_b";
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 1cdc346a05e8..d01bdee6f2f3 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -13,6 +13,7 @@
#include <dt-bindings/power/mt2701-power.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/memory/mt2701-larb-port.h>
#include <dt-bindings/reset/mt2701-resets.h>
#include <dt-bindings/thermal/thermal.h>
@@ -121,6 +122,15 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
system_clk: dummy13m {
compatible = "fixed-clock";
clock-frequency = <13000000>;
@@ -277,6 +287,17 @@
clock-names = "system-clk", "rtc-clk";
};
+ smi_common: smi@1000c000 {
+ compatible = "mediatek,mt7623-smi-common",
+ "mediatek,mt2701-smi-common";
+ reg = <0 0x1000c000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_SMI>,
+ <&mmsys CLK_MM_SMI_COMMON>,
+ <&infracfg CLK_INFRA_SMI>;
+ clock-names = "apb", "smi", "async";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
pwrap: pwrap@1000d000 {
compatible = "mediatek,mt7623-pwrap",
"mediatek,mt2701-pwrap";
@@ -308,6 +329,17 @@
reg = <0 0x10200100 0 0x1c>;
};
+ iommu: mmsys_iommu@10205000 {
+ compatible = "mediatek,mt7623-m4u",
+ "mediatek,mt2701-m4u";
+ reg = <0 0x10205000 0 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_M4U>;
+ clock-names = "bclk";
+ mediatek,larbs = <&larb0 &larb1 &larb2>;
+ #iommu-cells = <1>;
+ };
+
efuse: efuse@10206000 {
compatible = "mediatek,mt7623-efuse",
"mediatek,mt8173-efuse";
@@ -683,6 +715,90 @@
status = "disabled";
};
+ g3dsys: syscon@13000000 {
+ compatible = "mediatek,mt7623-g3dsys",
+ "mediatek,mt2701-g3dsys",
+ "syscon";
+ reg = <0 0x13000000 0 0x200>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ mmsys: syscon@14000000 {
+ compatible = "mediatek,mt7623-mmsys",
+ "mediatek,mt2701-mmsys",
+ "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ larb0: larb@14010000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x14010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <0>;
+ clocks = <&mmsys CLK_MM_SMI_LARB0>,
+ <&mmsys CLK_MM_SMI_LARB0>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
+ imgsys: syscon@15000000 {
+ compatible = "mediatek,mt7623-imgsys",
+ "mediatek,mt2701-imgsys",
+ "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ larb2: larb@15001000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x15001000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <2>;
+ clocks = <&imgsys CLK_IMG_SMI_COMM>,
+ <&imgsys CLK_IMG_SMI_COMM>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ };
+
+ jpegdec: jpegdec@15004000 {
+ compatible = "mediatek,mt7623-jpgdec",
+ "mediatek,mt2701-jpgdec";
+ reg = <0 0x15004000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+ <&imgsys CLK_IMG_JPGDEC>;
+ clock-names = "jpgdec-smi",
+ "jpgdec";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ mediatek,larb = <&larb2>;
+ iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+ <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+ };
+
+ vdecsys: syscon@16000000 {
+ compatible = "mediatek,mt7623-vdecsys",
+ "mediatek,mt2701-vdecsys",
+ "syscon";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ larb1: larb@16010000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x16010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <1>;
+ clocks = <&vdecsys CLK_VDEC_CKGEN>,
+ <&vdecsys CLK_VDEC_LARB>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+ };
+
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
@@ -937,6 +1053,14 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
status = "disabled";
};
+
+ bdpsys: syscon@1c000000 {
+ compatible = "mediatek,mt7623-bdpsys",
+ "mediatek,mt2701-bdpsys",
+ "syscon";
+ reg = <0 0x1c000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
};
&pio {
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index f1d6de8b3c19..000bf16de651 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -114,7 +114,7 @@
dma-names = "tx", "rx";
};
- mcspi1: mcspi@48098000 {
+ mcspi1: spi@48098000 {
compatible = "ti,omap2-mcspi";
ti,hwmods = "mcspi1";
reg = <0x48098000 0x100>;
@@ -125,7 +125,7 @@
"tx2", "rx2", "tx3", "rx3";
};
- mcspi2: mcspi@4809a000 {
+ mcspi2: spi@4809a000 {
compatible = "ti,omap2-mcspi";
ti,hwmods = "mcspi2";
reg = <0x4809a000 0x100>;
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 84635eeb99cd..7f57af2f10ac 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -285,7 +285,7 @@
ti,timer-alwon;
};
- mcspi3: mcspi@480b8000 {
+ mcspi3: spi@480b8000 {
compatible = "ti,omap2-mcspi";
ti,hwmods = "mcspi3";
reg = <0x480b8000 0x100>;
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index d80587de0bbf..9985ee2aae0c 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -160,10 +160,11 @@
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
@@ -174,9 +175,11 @@
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 3ca8991a6c3e..91bb50ad9a4f 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -147,10 +147,11 @@
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
@@ -161,9 +162,11 @@
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index ac830b917776..d5fe55392230 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -10,6 +10,7 @@
/dts-v1/;
#include "omap36xx.dtsi"
+#include <dt-bindings/input/input.h>
/ {
model = "OMAP3 GTA04";
@@ -28,6 +29,7 @@
aliases {
display0 = &lcd;
+ display1 = &tv0;
};
/* fixed 26MHz oscillator */
@@ -42,12 +44,27 @@
aux-button {
label = "aux";
- linux,code = <169>;
+ linux,code = <KEY_PHONE>;
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
};
+ antenna-detect {
+ compatible = "gpio-keys";
+
+ gps_antenna_button: gps-antenna-button {
+ label = "GPS_EXT_ANT";
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LINEIN_INSERT>;
+ gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */
+ interrupt-parent = <&gpio5>;
+ interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
sound {
compatible = "ti,omap-twl4030";
ti,model = "gta04";
@@ -55,7 +72,7 @@
ti,mcbsp = <&mcbsp2>;
};
- /* GSM audio */
+ /* GSM audio */
sound_telephony {
compatible = "simple-audio-card";
simple-audio-card,name = "GTA04 voice";
@@ -78,7 +95,7 @@
#sound-dai-cells = <0>;
};
- spi_lcd {
+ spi_lcd: spi_lcd {
compatible = "spi-gpio";
#address-cells = <0x1>;
#size-cells = <0x0>;
@@ -131,7 +148,7 @@
};
tv0: connector {
- compatible = "svideo-connector";
+ compatible = "composite-video-connector";
label = "tv";
port {
@@ -143,7 +160,7 @@
tv_amp: opa362 {
compatible = "ti,opa362";
- enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; /* GPIO_23 to enable video out amplifier */
ports {
#address-cells = <1>;
@@ -169,6 +186,42 @@
compatible = "mmc-pwrseq-simple";
reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */
};
+
+ /* devconf0 setup for mcbsp1 clock pins */
+ pinmux_mcbsp1@48002274 {
+ compatible = "pinctrl-single";
+ reg = <0x48002274 4>; /* CONTROL_DEVCONF0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x7>; /* MCBSP1 CLK pinmux */
+ #pinctrl-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_devconf0_pins>;
+ mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins {
+ /* offset bits mask */
+ pinctrl-single,bits = <0x00 0x08 0x1c>; /* set MCBSP1_CLKR */
+ };
+ };
+
+ /* devconf1 setup for tvout pins */
+ pinmux_tv_out@480022d8 {
+ compatible = "pinctrl-single";
+ reg = <0x480022d8 4>; /* CONTROL_DEVCONF1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x81>; /* TV out pin control */
+ #pinctrl-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tv_acbias_devconf1_pins>;
+ tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins {
+ /* offset bits mask */
+ pinctrl-single,bits = <0x00 0x40800 0x40800>; /* set TVOUTBYPASS and TVOUTACEN */
+ };
+ };
};
&omap3_pmx_core {
@@ -220,14 +273,14 @@
>;
};
- backlight_pins: backlight_pins_pimnux {
+ backlight_pins: backlight_pins_pinmux {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */
>;
};
dss_dpi_pins: pinmux_dss_dpi_pins {
- pinctrl-single,pins = <
+ pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
@@ -265,6 +318,12 @@
>;
};
+ bmp085_pins: pinmux_bmp085_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */
+ >;
+ };
+
bma180_pins: pinmux_bma180_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
@@ -282,6 +341,78 @@
OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
>;
};
+
+ penirq_pins: pinmux_penirq_pins {
+ pinctrl-single,pins = <
+ /* here we could enable to wakeup the cpu from suspend by a pen touch */
+ OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
+ >;
+ };
+
+ camera_pins: pinmux_camera_pins {
+ pinctrl-single,pins = <
+ /* set up parallel camera interface */
+ OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */
+ OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */
+ OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
+ OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */
+ OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */
+ OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */
+ OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */
+ OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */
+ OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */
+ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */
+ OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */
+ OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */
+ OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+ OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+ OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */
+ OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */
+ OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */
+ >;
+ };
+
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4) /* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_clkr.mcbsp1_fsr */
+ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */
+ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */
+ /* mcbsp_clks is used as PENIRQ */
+ /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp_clks */
+ OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */
+ OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */
+ >;
+ };
+
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dx */
+ >;
+ };
+
+ mcbsp3_pins: pinmux_mcbsp3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dx */
+ OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dr */
+ OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_clkx */
+ OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_fsx */
+ >;
+ };
+
+ mcbsp4_pins: pinmux_mcbsp4_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_clkx */
+ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_dr */
+ OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_dx.mcbsp4_fsx */
+ >;
+ };
};
&omap3_pmx_core2 {
@@ -347,6 +478,8 @@
bmp085@77 {
compatible = "bosch,bmp085";
reg = <0x77>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bmp085_pins>;
interrupt-parent = <&gpio4>;
interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
};
@@ -402,7 +535,7 @@
reg = <0x4>;
};
- wifi_reset: wifi_reset@6 {
+ wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
reg = <0x6>;
compatible = "gpio";
};
@@ -422,10 +555,19 @@
tsc2007@48 {
compatible = "ti,tsc2007";
reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&penirq_pins>;
interrupt-parent = <&gpio6>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
- gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* GPIO_160 */
ti,x-plate-ohms = <600>;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <640>;
+ touchscreen-max-pressure = <1000>;
+ touchscreen-fuzz-x = <3>;
+ touchscreen-fuzz-y = <8>;
+ touchscreen-fuzz-pressure = <10>;
+ touchscreen-inverted-y;
};
/* RFID EEPROM */
@@ -462,6 +604,7 @@
vmmc-supply = <&vmmc1>;
bus-width = <4>;
ti,non-removable;
+ broken-cd; /* hardware has no CD */
};
&mmc2 {
@@ -476,6 +619,19 @@
status = "disabled";
};
+#define BIT(x) (1 << (x))
+&twl_gpio {
+ /* pullups: BIT(2) */
+ ti,pullups = <BIT(2)>;
+ /*
+ * pulldowns:
+ * BIT(0), BIT(1), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) |
+ BIT(13) | BIT(15) | BIT(16) | BIT(17))>;
+};
+
&twl_keypad {
status = "disabled";
};
@@ -493,6 +649,7 @@
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
};
&charger {
@@ -510,7 +667,7 @@
&vaux2 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-always-on;
+ regulator-always-on; /* we should never switch off while vio is on! */
};
/* camera */
@@ -531,6 +688,12 @@
regulator-max-microvolt = <3150000>;
};
+/* Needed to power the DPI pins */
+
+&vpll2 {
+ regulator-always-on;
+};
+
&dss {
pinctrl-names = "default";
pinctrl-0 = < &dss_dpi_pins >;
@@ -551,10 +714,14 @@
vdda-supply = <&vdac>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port {
+ reg = <0>;
venc_out: endpoint {
remote-endpoint = <&opa_in>;
- ti,channels = <2>;
+ ti,channels = <1>;
ti,invert-polarity;
};
};
@@ -569,27 +736,27 @@
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
+ ti,nand-ecc-opt = "ham1";
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
nand-bus-width = <16>;
- ti,nand-ecc-opt = "bch8";
+ #address-cells = <1>;
+ #size-cells = <1>;
- gpmc,sync-clk-ps = <0>;
+ gpmc,device-width = <2>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
gpmc,cs-wr-off-ns = <44>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <34>;
gpmc,adv-wr-off-ns = <44>;
- gpmc,we-off-ns = <40>;
gpmc,oe-off-ns = <54>;
+ gpmc,we-off-ns = <40>;
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
- gpmc,device-width = <2>;
-
- #address-cells = <1>;
- #size-cells = <1>;
+ gpmc,sync-clk-ps = <0>;
x-loader@0 {
label = "X-Loader";
@@ -598,28 +765,51 @@
bootloaders@80000 {
label = "U-Boot";
- reg = <0x80000 0x1e0000>;
+ reg = <0x80000 0x1c0000>;
};
- bootloaders_env@260000 {
+ bootloaders_env@240000 {
label = "U-Boot Env";
- reg = <0x260000 0x20000>;
+ reg = <0x240000 0x40000>;
};
kernel@280000 {
label = "Kernel";
- reg = <0x280000 0x400000>;
+ reg = <0x280000 0x600000>;
};
- filesystem@680000 {
+ filesystem@880000 {
label = "File System";
- reg = <0x680000 0xf980000>;
+ reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */
};
};
};
-&mcbsp2 {
- status = "okay";
+&mcbsp1 { /* FM Transceiver PCM */
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 { /* TPS65950 I2S */
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&mcbsp3 { /* Bluetooth PCM */
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp3_pins>;
+};
+
+&mcbsp4 { /* GSM voice PCM */
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp4_pins>;
};
&hdqw1w {
@@ -627,6 +817,22 @@
pinctrl-0 = <&hdq_pins>;
};
-&mcbsp4 {
- status = "okay";
+/* image signal processor within OMAP3 SoC */
+&isp {
+ ports {
+ port@0 {
+ reg = <0>;
+ parallel_ep: endpoint {
+ ti,isp-clock-divisor = <1>;
+ ti,strobe-mode;
+ bus-width = <8>;/* Used data lines */
+ data-shift = <2>; /* Lines 9:2 are used */
+ hsync-active = <0>; /* Active low */
+ vsync-active = <1>; /* Active high */
+ data-active = <1>;/* Active high */
+ pclk-sample = <1>;/* Falling */
+ };
+ };
+ /* port@1 and port@2 are not used by GTA04 */
+ };
};
diff --git a/arch/arm/boot/dts/omap3-gta04a3.dts b/arch/arm/boot/dts/omap3-gta04a3.dts
index 3099a892cf50..cc9244956679 100644
--- a/arch/arm/boot/dts/omap3-gta04a3.dts
+++ b/arch/arm/boot/dts/omap3-gta04a3.dts
@@ -9,7 +9,7 @@
#include "omap3-gta04.dtsi"
/ {
- model = "Goldelico GTA04A3";
+ model = "Goldelico GTA04A3/Letux 2804";
};
&i2c2 {
diff --git a/arch/arm/boot/dts/omap3-gta04a4.dts b/arch/arm/boot/dts/omap3-gta04a4.dts
index c918bb1f0529..77afc711fe4f 100644
--- a/arch/arm/boot/dts/omap3-gta04a4.dts
+++ b/arch/arm/boot/dts/omap3-gta04a4.dts
@@ -9,5 +9,5 @@
#include "omap3-gta04.dtsi"
/ {
- model = "Goldelico GTA04A4";
+ model = "Goldelico GTA04A4/Letux 2804";
};
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
index 600b6ca5a1bd..bd232b1b24cb 100644
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com>
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -9,9 +9,132 @@
#include "omap3-gta04.dtsi"
/ {
- model = "Goldelico GTA04A5";
+ model = "Goldelico GTA04A5/Letux 2804";
sound {
- ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */
+ ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */
+ };
+
+ wlan_en: wlan_en_regulator {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_pins>;
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* GPIO_138 */
+
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pps_pins>;
+
+ gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */
+ };
+
+};
+
+&gpio5 {
+ irda_en {
+ gpio-hog;
+ gpios = <(175-160) GPIO_ACTIVE_HIGH>;
+ output-high; /* activate gpio_175 to disable IrDA receiver */
+ };
+};
+
+&omap3_pmx_core {
+ bt_pins: pinmux_bt_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat5 = mmc3_dat1 = gpio137 */
+ >;
+ };
+
+ wlan_pins: pinmux_wlan_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat6 = mmc3_dat2 = gpio138 */
+ >;
+ };
+
+ wlan_irq_pin: pinmux_wlan_irq_pin {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4) /* mmc2_dat7 = mmc3_dat3 = gpio139 */
+ >;
+ };
+
+ irda_pins: pinmux_irda {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4) /* mcspi1_cs1 = gpio175 */
+ >;
+ };
+
+ pps_pins: pinmux_pps_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
+ >;
+ };
+
+};
+
+/*
+ * for WL183x module see
+ * http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+ */
+
+&wifi_pwrseq {
+ /delete-property/ reset-gpios;
+};
+
+&mmc2 {
+ vmmc-supply = <&wlan_en>;
+ bus-width = <4>;
+ cap-power-off-card;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_irq_pin>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /delete-property/ mmc-pwrseq;
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_139 */
+ ref-clock-frequency = <26000000>;
+ };
+};
+
+&i2c2 {
+ /delete-node/ bmp085@77;
+ /delete-node/ bma180@41;
+ /delete-node/ itg3200@68;
+ /delete-node/ hmc5843@1e;
+
+ bmg160@69 {
+ compatible = "bosch,bmg160";
+ reg = <0x69>;
+ };
+
+ bmc150@10 {
+ compatible = "bosch,bmc150_accel";
+ reg = <0x10>;
+ };
+
+ bmc150@12 {
+ compatible = "bosch,bmc150_magn";
+ reg = <0x12>;
+ };
+
+ bme280@76 {
+ compatible = "bosch,bme280";
+ reg = <0x76>;
};
};
diff --git a/arch/arm/boot/dts/omap3-gta04a5one.dts b/arch/arm/boot/dts/omap3-gta04a5one.dts
new file mode 100644
index 000000000000..9b7bbdc344b3
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-gta04a5one.dts
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-gta04a5.dts"
+
+&omap3_pmx_core {
+ model = "Goldelico GTA04A5/Letux 2804 with OneNAND";
+
+ gpmc_pins: pinmux_gpmc_pins {
+ pinctrl-single,pins = <
+
+ /* address lines */
+ OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */
+ OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */
+ OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */
+
+ /* data lines, gpmc_d0..d7 not muxable according to TRM */
+ OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */
+ OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */
+ OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */
+ OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */
+ OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */
+ OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */
+ OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */
+ OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */
+
+ /*
+ * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
+ * according to TRM. OneNAND seems to require PIN_INPUT on clock.
+ */
+ OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */
+ OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
+ >;
+ };
+};
+
+&gpmc {
+ /* switch inherited setup to OneNAND */
+
+ ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmc_pins>;
+
+ /delete-node/ nand@0,0;
+
+ onenand@0,0 {
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ti,omap2-onenand";
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
+
+ gpmc,sync-read;
+ gpmc,sync-write;
+ gpmc,burst-length = <16>;
+ gpmc,burst-read;
+ gpmc,burst-wrap;
+ gpmc,burst-write;
+ gpmc,device-width = <2>;
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <87>;
+ gpmc,cs-wr-off-ns = <87>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <10>;
+ gpmc,adv-wr-off-ns = <10>;
+ gpmc,oe-on-ns = <15>;
+ gpmc,oe-off-ns = <87>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <87>;
+ gpmc,rd-cycle-ns = <112>;
+ gpmc,wr-cycle-ns = <112>;
+ gpmc,access-ns = <81>;
+ gpmc,page-burst-access-ns = <15>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <5>;
+ gpmc,wr-data-mux-bus-ns = <30>;
+ gpmc,wr-access-ns = <81>;
+ gpmc,sync-clk-ps = <15000>;
+
+ x-loader@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+
+ bootloaders@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1c0000>;
+ };
+
+ bootloaders_env@240000 {
+ label = "U-Boot Env";
+ reg = <0x240000 0x40000>;
+ };
+
+ kernel@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x600000>;
+ };
+
+ filesystem@880000 {
+ label = "File System";
+ reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */
+ };
+
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
index ded5fcf084eb..1f91646b8951 100644
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -40,7 +40,7 @@
};
&i2c3 {
- ak8975@0f {
+ ak8975@f {
compatible = "asahi-kasei,ak8975";
reg = <0x0f>;
};
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index ab6f640b282b..bf7ca00f4c21 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -700,6 +700,10 @@
vbus-supply = <&smps10_out1_reg>;
};
+&dwc3 {
+ dr_mode = "otg";
+};
+
&mcspi1 {
};
diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi
index ebd93df5d07a..b6c9b85951ea 100644
--- a/arch/arm/boot/dts/orion5x-linkstation.dtsi
+++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi
@@ -156,7 +156,7 @@
&i2c {
status = "okay";
- rtc {
+ rtc@32 {
compatible = "ricoh,rs5c372a";
reg = <0x32>;
};
diff --git a/arch/arm/boot/dts/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/owl-s500-cubieboard6.dts
index ea4e01bce8d1..7c96c59b610d 100644
--- a/arch/arm/boot/dts/owl-s500-cubieboard6.dts
+++ b/arch/arm/boot/dts/owl-s500-cubieboard6.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Cubietech CubieBoard6
*
* Copyright (c) 2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
index 7be1d2eaf3f0..e610d49395d2 100644
--- a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
+++ b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2016-2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/owl-s500-guitar.dtsi b/arch/arm/boot/dts/owl-s500-guitar.dtsi
index 079b2c02cc13..81cc39871f17 100644
--- a/arch/arm/boot/dts/owl-s500-guitar.dtsi
+++ b/arch/arm/boot/dts/owl-s500-guitar.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* LeMaker Guitar SoM
*
* Copyright (c) 2016-2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
#include "owl-s500.dtsi"
diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
index 43c9980a4260..5ceb6cc4451d 100644
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ b/arch/arm/boot/dts/owl-s500.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Actions Semi S500 SoC
*
* Copyright (c) 2016-2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi
index 95d59be97213..8494b5787170 100644
--- a/arch/arm/boot/dts/pxa25x.dtsi
+++ b/arch/arm/boot/dts/pxa25x.dtsi
@@ -80,6 +80,10 @@
#pwm-cells = <1>;
clocks = <&clks CLK_PWM1>;
};
+
+ rtc@40900000 {
+ clocks = <&clks CLK_OSC32k768>;
+ };
};
timer@40a00000 {
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index 747f750f675d..3228ad5fb725 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -71,7 +71,7 @@
clocks = <&clks CLK_PWM1>;
};
- pwri2c: i2c@40f000180 {
+ pwri2c: i2c@40f00180 {
compatible = "mrvl,pxa-i2c";
reg = <0x40f00180 0x24>;
interrupts = <6>;
@@ -113,6 +113,10 @@
status = "disabled";
};
+
+ rtc@40900000 {
+ clocks = <&clks CLK_OSC32k768>;
+ };
};
clocks {
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
index a520b4c14ea9..080d5c5169b5 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -9,6 +9,25 @@
#include "skeleton.dtsi"
#include "dt-bindings/clock/pxa-clock.h"
+#define PMGROUP(pin) #pin
+#define PMMUX(func, pin, af) \
+ mux- ## func { \
+ groups = PMGROUP(P ## pin); \
+ function = #af; \
+ }
+#define PMMUX_LPM_LOW(func, pin, af) \
+ mux- ## func { \
+ groups = PMGROUP(P ## pin); \
+ function = #af; \
+ low-power-disable; \
+ }
+#define PMMUX_LPM_HIGH(func, pin, af) \
+ mux- ## func { \
+ groups = PMGROUP(P ## pin); \
+ function = #af; \
+ low-power-enable; \
+ }
+
/ {
model = "Marvell PXA2xx family SoC";
compatible = "marvell,pxa2xx";
@@ -76,7 +95,7 @@
};
};
- ffuart: uart@40100000 {
+ ffuart: serial@40100000 {
compatible = "mrvl,pxa-uart";
reg = <0x40100000 0x30>;
interrupts = <22>;
@@ -84,7 +103,7 @@
status = "disabled";
};
- btuart: uart@40200000 {
+ btuart: serial@40200000 {
compatible = "mrvl,pxa-uart";
reg = <0x40200000 0x30>;
interrupts = <21>;
@@ -92,7 +111,7 @@
status = "disabled";
};
- stuart: uart@40700000 {
+ stuart: serial@40700000 {
compatible = "mrvl,pxa-uart";
reg = <0x40700000 0x30>;
interrupts = <20>;
@@ -100,7 +119,7 @@
status = "disabled";
};
- hwuart: uart@41100000 {
+ hwuart: serial@41100000 {
compatible = "mrvl,pxa-uart";
reg = <0x41100000 0x30>;
interrupts = <7>;
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 4a99c9255104..48c3cf427610 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1611,10 +1611,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
@@ -1626,10 +1627,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
@@ -1640,7 +1642,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1656,10 +1658,11 @@
remote-endpoint = <&tpiu_in>;
};
};
- port@2 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&funnel_out>;
};
};
@@ -1673,7 +1676,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1687,33 +1690,31 @@
port@0 {
reg = <0>;
funnel_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
funnel_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@4 {
reg = <4>;
funnel_in4: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@5 {
reg = <5>;
funnel_in5: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
funnel_out: endpoint {
remote-endpoint = <&replicator_in>;
};
@@ -1730,9 +1731,11 @@
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in0>;
+ };
};
};
};
@@ -1746,9 +1749,11 @@
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in1>;
+ };
};
};
};
@@ -1762,9 +1767,11 @@
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel_in4>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in4>;
+ };
};
};
};
@@ -1778,9 +1785,11 @@
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel_in5>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in5>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 78db67337ed4..2d56008d8d6b 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -52,78 +52,85 @@
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
reg = <0x0>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
- operating-points = <
- /* kHz uV (fixed) */
- 48000 1100000
- 200000 1100000
- 500000 1100000
- 716000 1100000
- >;
clock-latency = <256000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
reg = <0x1>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
- operating-points = <
- /* kHz uV (fixed) */
- 48000 1100000
- 200000 1100000
- 500000 1100000
- 666000 1100000
- >;
clock-latency = <256000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc2>;
qcom,saw = <&saw2>;
reg = <0x2>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
- operating-points = <
- /* kHz uV (fixed) */
- 48000 1100000
- 200000 1100000
- 500000 1100000
- 666000 1100000
- >;
clock-latency = <256000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc3>;
qcom,saw = <&saw3>;
reg = <0x3>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
- operating-points = <
- /* kHz uV (fixed) */
- 48000 1100000
- 200000 1100000
- 500000 1100000
- 666000 1100000
- >;
clock-latency = <256000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-48000000 {
+ opp-hz = /bits/ 64 <48000000>;
+ clock-latency-ns = <256000>;
+ };
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ clock-latency-ns = <256000>;
+ };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ clock-latency-ns = <256000>;
+ };
+ opp-716000000 {
+ opp-hz = /bits/ 64 <716000000>;
+ clock-latency-ns = <256000>;
+ };
};
pmu {
@@ -291,49 +298,49 @@
status = "disabled";
};
- acc0: clock-controller@b088000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
- };
+ acc0: clock-controller@b088000 {
+ compatible = "qcom,kpss-acc-v2";
+ reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
+ };
- acc1: clock-controller@b098000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
- };
+ acc1: clock-controller@b098000 {
+ compatible = "qcom,kpss-acc-v2";
+ reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
+ };
- acc2: clock-controller@b0a8000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
- };
+ acc2: clock-controller@b0a8000 {
+ compatible = "qcom,kpss-acc-v2";
+ reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
+ };
- acc3: clock-controller@b0b8000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
- };
+ acc3: clock-controller@b0b8000 {
+ compatible = "qcom,kpss-acc-v2";
+ reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
+ };
- saw0: regulator@b089000 {
- compatible = "qcom,saw2";
- reg = <0x02089000 0x1000>, <0x0b009000 0x1000>;
+ saw0: regulator@b089000 {
+ compatible = "qcom,saw2";
+ reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
regulator;
- };
+ };
- saw1: regulator@b099000 {
- compatible = "qcom,saw2";
- reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
- regulator;
- };
+ saw1: regulator@b099000 {
+ compatible = "qcom,saw2";
+ reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
+ regulator;
+ };
- saw2: regulator@b0a9000 {
- compatible = "qcom,saw2";
- reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
- regulator;
- };
+ saw2: regulator@b0a9000 {
+ compatible = "qcom,saw2";
+ reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
+ regulator;
+ };
- saw3: regulator@b0b9000 {
- compatible = "qcom,saw2";
- reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
- regulator;
- };
+ saw3: regulator@b0b9000 {
+ compatible = "qcom,saw2";
+ reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
+ regulator;
+ };
blsp1_uart1: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
@@ -387,7 +394,7 @@
#size-cells = <2>;
ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
- 0x82000000 0 0x48000000 0x48000000 0 0x10000000>;
+ 0x82000000 0 0x40300000 0x40300000 0 0x400000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "msi";
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index bcf53e37ed93..554c65e7aa0e 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -2,26 +2,8 @@
#include "qcom-ipq8064-v1.0.dtsi"
/ {
- model = "Qualcomm IPQ8064/AP148";
- compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
-
- aliases {
- serial0 = &gsbi4_serial;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
+ model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
+ compatible = "qcom,ipq8064-ap148";
soc {
pinmux@800000 {
@@ -31,73 +13,22 @@
bias-disable;
};
- spi_pins: spi_pins {
+ buttons_pins: buttons_pins {
mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- drive-strength = <10>;
- bias-none;
+ pins = "gpio54", "gpio65";
+ drive-strength = <2>;
+ bias-pull-up;
};
};
};
gsbi@16300000 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "ok";
- serial@16340000 {
+ i2c@16380000 {
status = "ok";
- };
-
- i2c4: i2c@16380000 {
- status = "ok";
-
clock-frequency = <200000>;
-
pinctrl-0 = <&i2c4_pins>;
pinctrl-names = "default";
};
};
-
- gsbi5: gsbi@1a200000 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "ok";
-
- spi4: spi@1a280000 {
- status = "ok";
- spi-max-frequency = <50000000>;
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 0>;
-
- flash: m25p80@0 {
- compatible = "s25fl256s1";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- partition@0 {
- label = "rootfs";
- reg = <0x0 0x1000000>;
- };
-
- partition@1 {
- label = "scratch";
- reg = <0x1000000 0x1000000>;
- };
- };
- };
- };
-
- sata-phy@1b400000 {
- status = "ok";
- };
-
- sata@29000000 {
- ports-implemented = <0x1>;
- status = "ok";
- };
};
};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
index e1181194e8d3..e239a0486936 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -1,2 +1,127 @@
// SPDX-License-Identifier: GPL-2.0
#include "qcom-ipq8064.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
+
+ aliases {
+ serial0 = &gsbi4_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ soc {
+ gsbi@16300000 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "ok";
+
+ serial@16340000 {
+ status = "ok";
+ };
+ };
+
+ gsbi5: gsbi@1a200000 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "ok";
+
+ spi4: spi@1a280000 {
+ status = "ok";
+ spi-max-frequency = <50000000>;
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 0>;
+
+ flash: m25p80@0 {
+ compatible = "s25fl256s1";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partition@0 {
+ label = "rootfs";
+ reg = <0x0 0x1000000>;
+ };
+
+ partition@1 {
+ label = "scratch";
+ reg = <0x1000000 0x1000000>;
+ };
+ };
+ };
+ };
+
+ sata-phy@1b400000 {
+ status = "ok";
+ };
+
+ sata@29000000 {
+ ports-implemented = <0x1>;
+ status = "ok";
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&buttons_pins>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ debounce-interval = <60>;
+ };
+ button@2 {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&leds_pins>;
+ pinctrl-names = "default";
+
+ led@7 {
+ label = "led_usb1";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usbdev";
+ default-state = "off";
+ };
+
+ led@8 {
+ label = "led_usb3";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usbdev";
+ default-state = "off";
+ };
+
+ led@9 {
+ label = "status_led_fail";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@26 {
+ label = "sata_led";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@53 {
+ label = "status_led_pass";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 70790ac242d1..f793cd1ad6d0 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -2,8 +2,11 @@
/dts-v1/;
#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -114,6 +117,61 @@
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+
+ pcie0_pins: pcie0_pinmux {
+ mux {
+ pins = "gpio3";
+ function = "pcie1_rst";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ pcie1_pins: pcie1_pinmux {
+ mux {
+ pins = "gpio48";
+ function = "pcie2_rst";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ pcie2_pins: pcie2_pinmux {
+ mux {
+ pins = "gpio63";
+ function = "pcie3_rst";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-none;
+ };
+ };
+
+ leds_pins: leds_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9",
+ "gpio26", "gpio53";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ output-low;
+ };
+ };
+
+ buttons_pins: buttons_pins {
+ mux {
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
};
intc: interrupt-controller@2000000 {
@@ -373,5 +431,233 @@
#reset-cells = <1>;
};
+ pcie0: pci@1b500000 {
+ compatible = "qcom,pcie-ipq8064";
+ reg = <0x1b500000 0x1000
+ 0x1b502000 0x80
+ 0x1b600000 0x100
+ 0x0ff00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */
+ 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc PCIE_A_CLK>,
+ <&gcc PCIE_H_CLK>,
+ <&gcc PCIE_PHY_CLK>,
+ <&gcc PCIE_AUX_CLK>,
+ <&gcc PCIE_ALT_REF_CLK>;
+ clock-names = "core", "iface", "phy", "aux", "ref";
+
+ assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc PCIE_ACLK_RESET>,
+ <&gcc PCIE_HCLK_RESET>,
+ <&gcc PCIE_POR_RESET>,
+ <&gcc PCIE_PCI_RESET>,
+ <&gcc PCIE_PHY_RESET>,
+ <&gcc PCIE_EXT_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+ };
+
+ pcie1: pci@1b700000 {
+ compatible = "qcom,pcie-ipq8064";
+ reg = <0x1b700000 0x1000
+ 0x1b702000 0x80
+ 0x1b800000 0x100
+ 0x31f00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */
+ 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc PCIE_1_A_CLK>,
+ <&gcc PCIE_1_H_CLK>,
+ <&gcc PCIE_1_PHY_CLK>,
+ <&gcc PCIE_1_AUX_CLK>,
+ <&gcc PCIE_1_ALT_REF_CLK>;
+ clock-names = "core", "iface", "phy", "aux", "ref";
+
+ assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc PCIE_1_ACLK_RESET>,
+ <&gcc PCIE_1_HCLK_RESET>,
+ <&gcc PCIE_1_POR_RESET>,
+ <&gcc PCIE_1_PCI_RESET>,
+ <&gcc PCIE_1_PHY_RESET>,
+ <&gcc PCIE_1_EXT_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+ };
+
+ pcie2: pci@1b900000 {
+ compatible = "qcom,pcie-ipq8064";
+ reg = <0x1b900000 0x1000
+ 0x1b902000 0x80
+ 0x1ba00000 0x100
+ 0x35f00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <2>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */
+ 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc PCIE_2_A_CLK>,
+ <&gcc PCIE_2_H_CLK>,
+ <&gcc PCIE_2_PHY_CLK>,
+ <&gcc PCIE_2_AUX_CLK>,
+ <&gcc PCIE_2_ALT_REF_CLK>;
+ clock-names = "core", "iface", "phy", "aux", "ref";
+
+ assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc PCIE_2_ACLK_RESET>,
+ <&gcc PCIE_2_HCLK_RESET>,
+ <&gcc PCIE_2_POR_RESET>,
+ <&gcc PCIE_2_PCI_RESET>,
+ <&gcc PCIE_2_PHY_RESET>,
+ <&gcc PCIE_2_EXT_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+ pinctrl-0 = <&pcie2_pins>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+ };
+
+ vsdcc_fixed: vsdcc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "SDCC Power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sdcc1bam:dma@12402000 {
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x12402000 0x8000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc SDC1_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ sdcc3bam:dma@12182000 {
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x12182000 0x8000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc SDC3_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sdcc@12400000 {
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ reg = <0x12400000 0x2000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <96000000>;
+ non-removable;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ vmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+ dma-names = "tx", "rx";
+ };
+
+ sdcc@12180000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ status = "disabled";
+ reg = <0x12180000 0x2000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <192000000>;
+ #mmc-ddr-1_8v;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
+ vqmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+ dma-names = "tx", "rx";
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index c2dc9d09484a..ed8f064d0895 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -241,6 +241,33 @@
bias-pull-up;
};
};
+
+ i2c3_pins: i2c3 {
+ mux {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c12_pins: i2c12 {
+ mux {
+ pins = "gpio87", "gpio88";
+ function = "blsp_i2c12";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ mpu6515_pin: mpu6515 {
+ irq {
+ pins = "gpio73";
+ function = "gpio";
+ bias-disable;
+ input-enable;
+ };
+ };
};
sdhci@f9824900 {
@@ -277,6 +304,62 @@
linux,code = <KEY_VOLUMEDOWN>;
};
};
+
+ i2c@f9968000 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c12_pins>;
+ clock-frequency = <100000>;
+ qcom,src-freq = <50000000>;
+
+ mpu6515@68 {
+ compatible = "invensense,mpu6515";
+ reg = <0x68>;
+ interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>;
+ vddio-supply = <&pm8941_lvs1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpu6515_pin>;
+
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ak8963@f {
+ compatible = "asahi-kasei,ak8963";
+ reg = <0x0f>;
+ // Currently only works in polling mode.
+ // gpios = <&msmgpio 61 0>;
+ vid-supply = <&pm8941_lvs1>;
+ vdd-supply = <&pm8941_l17>;
+ };
+
+ bmp280@76 {
+ compatible = "bosch,bmp280";
+ reg = <0x76>;
+ vdda-supply = <&pm8941_lvs1>;
+ vddd-supply = <&pm8941_l17>;
+ };
+ };
+ };
+ };
+
+ i2c@f9925000 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ clock-frequency = <100000>;
+ qcom,src-freq = <50000000>;
+
+ avago_apds993@39 {
+ compatible = "avago,apds9930";
+ reg = <0x39>;
+ interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8941_l17>;
+ vddio-supply = <&pm8941_lvs1>;
+ led-max-microamp = <100000>;
+ amstaos,proximity-diodes = <0>;
+ };
+ };
};
&spmi_bus {
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index d9019a49b292..aba159d5a95a 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -67,7 +67,7 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9 0xf04>;
CPU0: cpu@0 {
compatible = "qcom,krait";
@@ -214,7 +214,7 @@
cpu-pmu {
compatible = "qcom,krait-pmu";
- interrupts = <1 7 0xf04>;
+ interrupts = <GIC_PPI 7 0xf04>;
};
clocks {
@@ -233,17 +233,17 @@
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 2 0xf08>,
- <1 3 0xf08>,
- <1 4 0xf08>,
- <1 1 0xf08>;
+ interrupts = <GIC_PPI 2 0xf08>,
+ <GIC_PPI 3 0xf08>,
+ <GIC_PPI 4 0xf08>,
+ <GIC_PPI 1 0xf08>;
clock-frequency = <19200000>;
};
adsp-pil {
compatible = "qcom,msm8974-adsp-pil";
- interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -275,7 +275,7 @@
qcom,smem = <443>, <429>;
interrupt-parent = <&intc>;
- interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 10>;
@@ -300,7 +300,7 @@
qcom,smem = <435>, <428>;
interrupt-parent = <&intc>;
- interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 14>;
@@ -325,7 +325,7 @@
qcom,smem = <451>, <431>;
interrupt-parent = <&intc>;
- interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 18>;
@@ -364,7 +364,7 @@
modem_smsm: modem@1 {
reg = <1>;
- interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -372,7 +372,7 @@
adsp_smsm: adsp@2 {
reg = <2>;
- interrupts = <0 157 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -380,7 +380,7 @@
wcnss_smsm: wcnss@7 {
reg = <7>;
- interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -445,50 +445,50 @@
frame@f9021000 {
frame-number = <0>;
- interrupts = <0 8 0x4>,
- <0 7 0x4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9021000 0x1000>,
<0xf9022000 0x1000>;
};
frame@f9023000 {
frame-number = <1>;
- interrupts = <0 9 0x4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9023000 0x1000>;
status = "disabled";
};
frame@f9024000 {
frame-number = <2>;
- interrupts = <0 10 0x4>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9024000 0x1000>;
status = "disabled";
};
frame@f9025000 {
frame-number = <3>;
- interrupts = <0 11 0x4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9025000 0x1000>;
status = "disabled";
};
frame@f9026000 {
frame-number = <4>;
- interrupts = <0 12 0x4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9026000 0x1000>;
status = "disabled";
};
frame@f9027000 {
frame-number = <5>;
- interrupts = <0 13 0x4>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9027000 0x1000>;
status = "disabled";
};
frame@f9028000 {
frame-number = <6>;
- interrupts = <0 14 0x4>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9028000 0x1000>;
status = "disabled";
};
@@ -586,7 +586,7 @@
blsp1_uart1: serial@f991d000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991d000 0x1000>;
- interrupts = <0 107 0x0>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -595,7 +595,7 @@
blsp1_uart2: serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
- interrupts = <0 108 0x0>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -605,7 +605,8 @@
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <0 123 0>, <0 138 0>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>,
@@ -618,8 +619,8 @@
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
- <GIC_SPI 224 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC3_APPS_CLK>,
<&gcc GCC_SDCC3_AHB_CLK>,
@@ -632,7 +633,8 @@
compatible = "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <0 125 0>, <0 221 0>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>,
@@ -699,25 +701,36 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 208 0>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
};
i2c@f9924000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9924000 0x1000>;
- interrupts = <0 96 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
};
+ blsp_i2c3: i2c@f9925000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9925000 0x1000>;
+ interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
blsp_i2c8: i2c@f9964000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9964000 0x1000>;
- interrupts = <0 102 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
@@ -728,7 +741,7 @@
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9967000 0x1000>;
- interrupts = <0 105 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
@@ -737,6 +750,17 @@
dma-names = "tx", "rx";
};
+ blsp_i2c12: i2c@f9968000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9968000 0x1000>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
spmi_bus: spmi@fc4cf000 {
compatible = "qcom,spmi-pmic-arb";
reg-names = "core", "intr", "cnfg";
@@ -744,7 +768,7 @@
<0xfc4cb000 0x1000>,
<0xfc4ca000 0x1000>;
interrupt-names = "periph_irq";
- interrupts = <0 190 0>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
@@ -770,10 +794,11 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etr_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
@@ -785,10 +810,11 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
@@ -800,7 +826,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -816,10 +842,11 @@
remote-endpoint = <&tpiu_in>;
};
};
- port@2 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&etf_out>;
};
};
@@ -833,20 +860,17 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
etf_out: endpoint {
remote-endpoint = <&replicator_in>;
};
};
- port@1 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
etf_in: endpoint {
- slave-mode;
remote-endpoint = <&merger_out>;
};
};
@@ -860,7 +884,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -873,12 +897,13 @@
port@1 {
reg = <1>;
merger_in1: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
merger_out: endpoint {
remote-endpoint = <&etf_in>;
};
@@ -893,7 +918,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -910,12 +935,13 @@
port@5 {
reg = <5>;
funnel1_in5: endpoint {
- slave-mode;
remote-endpoint = <&kpss_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
funnel1_out: endpoint {
remote-endpoint = <&merger_in1>;
};
@@ -930,40 +956,38 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
kpss_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
kpss_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
kpss_in2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
kpss_in3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
kpss_out: endpoint {
remote-endpoint = <&funnel1_in5>;
};
@@ -980,9 +1004,11 @@
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&kpss_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&kpss_in0>;
+ };
};
};
};
@@ -996,9 +1022,11 @@
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&kpss_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&kpss_in1>;
+ };
};
};
};
@@ -1012,9 +1040,11 @@
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&kpss_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&kpss_in2>;
+ };
};
};
};
@@ -1028,9 +1058,11 @@
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&kpss_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&kpss_in3>;
+ };
};
};
};
@@ -1040,21 +1072,21 @@
compatible = "qcom,smd";
adsp {
- interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 8>;
qcom,smd-edge = <1>;
};
modem {
- interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 12>;
qcom,smd-edge = <0>;
};
rpm {
- interrupts = <0 168 1>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
index 327545119ee3..0d006aea99da 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
@@ -14,3 +14,7 @@
model = "iW-RainboW-G20D-Q7 RZ/G1M based plus camera daughter board";
compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
};
+
+&pciec {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
index b683db4da8b1..498e223a5f93 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
+++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
@@ -13,3 +13,7 @@
model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M";
compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
};
+
+&pciec {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index e3585daafdd6..22da819f186b 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -35,6 +35,8 @@
phy3: ethernet-phy@3 {
reg = <3>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <1>;
};
};
@@ -43,6 +45,16 @@
clock-frequency = <20000000>;
};
+&pfc {
+ scif1_pins: scif1 {
+ groups = "scif1_data_b";
+ function = "scif1";
+ };
+};
+
&scif1 {
+ pinctrl-0 = <&scif1_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 87d32d3e23de..9ec78d3d0ca8 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/r8a77470-cpg-mssr.h>
+#include <dt-bindings/power/r8a77470-sysc.h>
/ {
compatible = "renesas,r8a77470";
#address-cells = <2>;
@@ -16,6 +17,7 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -23,16 +25,25 @@
reg = <0>;
clock-frequency = <1000000000>;
clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
- power-domains = <&sysc 5>;
+ power-domains = <&sysc R8A77470_PD_CA7_CPU0>;
next-level-cache = <&L2_CA7>;
};
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <1>;
+ clock-frequency = <1000000000>;
+ clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
+ power-domains = <&sysc R8A77470_PD_CA7_CPU1>;
+ next-level-cache = <&L2_CA7>;
+ };
L2_CA7: cache-controller-0 {
compatible = "cache";
cache-unified;
cache-level = <2>;
- power-domains = <&sysc 21>;
+ power-domains = <&sysc R8A77470_PD_CA7_SCU>;
};
};
@@ -60,6 +71,102 @@
#size-cells = <2>;
ranges;
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 23>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 912>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 23>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 911>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 910>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 30>;
+ gpio-reserved-ranges = <17 10>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 909>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 908>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 907>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
+ };
+
+ pfc: pin-controller@e6060000 {
+ compatible = "renesas,pfc-r8a77470";
+ reg = <0 0xe6060000 0 0x118>;
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a77470-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
@@ -70,6 +177,12 @@
#reset-cells = <1>;
};
+ apmu@e6151000 {
+ compatible = "renesas,r8a77470-apmu", "renesas,apmu";
+ reg = <0 0xe6151000 0 0x188>;
+ cpus = <&cpu0 &cpu1>;
+ };
+
rst: reset-controller@e6160000 {
compatible = "renesas,r8a77470-rst";
reg = <0 0xe6160000 0 0x100>;
@@ -97,7 +210,7 @@
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 407>;
};
@@ -124,6 +237,20 @@
reg = <0 0xe6300000 0 0x20000>;
};
+ i2c4: i2c@e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77470",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a77470",
"renesas,rcar-dmac";
@@ -151,7 +278,7 @@
"ch12", "ch13", "ch14";
clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <15>;
@@ -184,7 +311,7 @@
"ch12", "ch13", "ch14";
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <15>;
@@ -196,7 +323,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
#size-cells = <0>;
@@ -214,7 +341,7 @@
dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
<&dmac1 0x29>, <&dmac1 0x2a>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 721>;
status = "disabled";
};
@@ -230,7 +357,7 @@
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
<&dmac1 0x2d>, <&dmac1 0x2e>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 720>;
status = "disabled";
};
@@ -246,7 +373,7 @@
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
<&dmac1 0x2b>, <&dmac1 0x2c>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 719>;
status = "disabled";
};
@@ -262,7 +389,7 @@
dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
<&dmac1 0x2f>, <&dmac1 0x30>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 718>;
status = "disabled";
};
@@ -278,7 +405,7 @@
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
<&dmac1 0xfb>, <&dmac1 0xfc>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 715>;
status = "disabled";
};
@@ -294,11 +421,26 @@
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
<&dmac1 0xfd>, <&dmac1 0xfe>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 714>;
status = "disabled";
};
+ sdhi2: sd@ee160000 {
+ compatible = "renesas,sdhi-r8a77470",
+ "renesas,rcar-gen2-sdhi";
+ reg = <0 0xee160000 0 0x328>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 312>;
+ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+ <&dmac1 0xd3>, <&dmac1 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <97500000>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1001000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -309,7 +451,7 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 408>;
};
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index de808d2ea856..cecb22924ec4 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Reference Device Tree Source for the Bock-W board
+ * Reference Device Tree Source for the R-Car M1A (R8A77781) Bock-W board
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 1bce16cc6b20..05db0ccad7a6 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for Renesas r8a7778
+ * Device Tree Source for the R-Car M1A (R8A77781) SoC
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index a4d0038363f0..abc14e7a4c93 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the Marzen board
+ * Device Tree Source for the R-Car H1 (R8A77790) Marzen board
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Simon Horman
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 6b997bc016ee..3bc133d9489c 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for Renesas r8a7779
+ * Device Tree Source for the R-Car H1 (R8A77790) SoC
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Simon Horman
@@ -344,7 +344,7 @@
sata: sata@fc600000 {
compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
- reg = <0xfc600000 0x2000>;
+ reg = <0xfc600000 0x200000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_SATA>;
power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
index a13a92c26645..629da4cee1b9 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -318,6 +318,10 @@
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
+ onkey {
+ compatible = "dlg,da9063-onkey";
+ };
+
rtc {
compatible = "dlg,da9063-rtc";
};
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 0925bdca438f..5a2747758f67 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7790 SoC
+ * Device Tree Source for the R-Car H2 (R8A77900) SoC
*
* Copyright (C) 2015 Renesas Electronics Corporation
* Copyright (C) 2013-2014 Renesas Solutions Corp.
@@ -1559,7 +1559,7 @@
sata0: sata@ee300000 {
compatible = "renesas,sata-r8a7790",
"renesas,rcar-gen2-sata";
- reg = <0 0xee300000 0 0x2000>;
+ reg = <0 0xee300000 0 0x200000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 815>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
@@ -1570,7 +1570,7 @@
sata1: sata@ee500000 {
compatible = "renesas,sata-r8a7790",
"renesas,rcar-gen2-sata";
- reg = <0 0xee500000 0 0x2000>;
+ reg = <0 0xee500000 0 0x200000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 814>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 991ac6feedd5..6f875502453c 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7791 SoC
+ * Device Tree Source for the R-Car M2-W (R8A77910) SoC
*
* Copyright (C) 2013-2015 Renesas Electronics Corporation
* Copyright (C) 2013-2014 Renesas Solutions Corp.
@@ -1543,7 +1543,7 @@
sata0: sata@ee300000 {
compatible = "renesas,sata-r8a7791",
"renesas,rcar-gen2-sata";
- reg = <0 0xee300000 0 0x2000>;
+ reg = <0 0xee300000 0 0x200000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 815>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
@@ -1554,7 +1554,7 @@
sata1: sata@ee500000 {
compatible = "renesas,sata-r8a7791",
"renesas,rcar-gen2-sata";
- reg = <0 0xee500000 0 0x2000>;
+ reg = <0 0xee500000 0 0x200000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 814>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 63a978ec81cc..8e9eb4b704d3 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7792 SoC
+ * Device Tree Source for the R-Car V2H (R8A77920) SoC
*
* Copyright (C) 2016 Cogent Embedded Inc.
*/
@@ -829,7 +829,6 @@
du: display@feb00000 {
compatible = "renesas,du-r8a7792";
reg = <0 0xfeb00000 0 0x40000>;
- reg-names = "du";
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 6b2f3a4fd13d..f51601af89a2 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -596,6 +596,10 @@
status = "okay";
};
+&cpu0 {
+ cpu0-supply = <&vdd_dvfs>;
+};
+
&rwdt {
timeout-sec = <60>;
status = "okay";
@@ -725,6 +729,18 @@
compatible = "dlg,da9063-watchdog";
};
};
+
+ vdd_dvfs: regulator@68 {
+ compatible = "dlg,da9210";
+ reg = <0x68>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&i2c4 {
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 620a570307ff..bf05110fac4e 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7793 SoC
+ * Device Tree Source for the R-Car M2-N (R8A77930) SoC
*
* Copyright (C) 2014-2015 Renesas Electronics Corporation
*/
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index daec965889d3..60e91ebfa65d 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -405,6 +405,31 @@
clock-frequency = <400000>;
};
+&i2c7 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ onkey {
+ compatible = "dlg,da9063-onkey";
+ };
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+ };
+};
+
&mmcif0 {
pinctrl-0 = <&mmcif0_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index ea2ca4bdaf1c..8d797d34816e 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7794 SoC
+ * Device Tree Source for the R-Car E2 (R8A77940) SoC
*
* Copyright (C) 2014 Renesas Electronics Corporation
* Copyright (C) 2014 Ulrich Hecht
@@ -1349,7 +1349,6 @@
du: display@feb00000 {
compatible = "renesas,du-r8a7794";
reg = <0 0xfeb00000 0 0x40000>;
- reg-names = "du";
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index afe29c95a006..eaf94976ed6d 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -7,6 +7,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a06g032-sysctrl.h>
/ {
compatible = "renesas,r9a06g032";
@@ -21,14 +22,14 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0>;
- clocks = <&sysctrl 84>;
+ clocks = <&sysctrl R9A06G032_CLK_A7MP>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <1>;
- clocks = <&sysctrl 84>;
+ clocks = <&sysctrl R9A06G032_CLK_A7MP>;
enable-method = "renesas,r9a06g032-smp";
cpu-release-addr = <0 0x4000c204>;
};
@@ -77,13 +78,90 @@
};
uart0: serial@40060000 {
- compatible = "snps,dw-apb-uart";
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
reg = <0x40060000 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&sysctrl 146>;
- clock-names = "baudclk";
+ clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart1: serial@40061000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
+ reg = <0x40061000 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART1>, <&sysctrl R9A06G032_HCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart2: serial@40062000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
+ reg = <0x40062000 0x400>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART2>, <&sysctrl R9A06G032_HCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart3: serial@50000000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+ reg = <0x50000000 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart4: serial@50001000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+ reg = <0x50001000 0x400>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart5: serial@50002000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+ reg = <0x50002000 0x400>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart6: serial@50003000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+ reg = <0x50003000 0x400>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart7: serial@50004000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+ reg = <0x50004000 0x400>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
+ clock-names = "baudclk", "apb_pclk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 67f57200d9a0..d560fc4051c5 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -733,7 +733,7 @@
/* no rts / cts for uart2 */
};
- spi {
+ spi-pins {
spi_txd:spi-txd {
rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
};
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 45fd2b302dda..4a2890618f6f 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -93,6 +93,8 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
@@ -315,6 +317,12 @@
};
};
+ sd0 {
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
usb {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index aa123f93f181..b6f790973736 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -56,6 +56,11 @@
};
};
+ display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop0_out>, <&vop1_out>;
+ };
+
sram: sram@10080000 {
compatible = "mmio-sram";
reg = <0x10080000 0x8000>;
@@ -69,6 +74,38 @@
};
};
+ vop0: vop@1010c000 {
+ compatible = "rockchip,rk3188-vop";
+ reg = <0x1010c000 0x1000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_LCDC0>, <&cru DCLK_LCDC0>, <&cru HCLK_LCDC0>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
+ reset-names = "axi", "ahb", "dclk";
+ status = "disabled";
+
+ vop0_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ vop1: vop@1010e000 {
+ compatible = "rockchip,rk3188-vop";
+ reg = <0x1010e000 0x1000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_LCDC1>, <&cru DCLK_LCDC1>, <&cru HCLK_LCDC1>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
+ reset-names = "axi", "ahb", "dclk";
+ status = "disabled";
+
+ vop1_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
timer3: timer@2000e000 {
compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
reg = <0x2000e000 0x20>;
@@ -309,6 +346,51 @@
};
};
+ lcdc1 {
+ lcdc1_dclk: lcdc1-dclk {
+ rockchip,pins = <2 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ lcdc1_den: lcdc1-den {
+ rockchip,pins = <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ lcdc1_hsync: lcdc1-hsync {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ lcdc1_vsync: lcdc1-vsync {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ lcdc1_rgb24: ldcd1-rgb24 {
+ rockchip,pins = <2 RK_PA0 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA1 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA2 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA3 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA4 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA5 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA6 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA7 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB0 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB1 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB2 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB3 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB4 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB5 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB7 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC0 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC2 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC3 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC4 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC5 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC6 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
pwm0 {
pwm0_out: pwm0-out {
rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-tinker-s.dts b/arch/arm/boot/dts/rk3288-tinker-s.dts
new file mode 100644
index 000000000000..37093922b482
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-tinker-s.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rk3288-tinker.dtsi"
+
+/ {
+ model = "Rockchip RK3288 Asus Tinker Board S";
+ compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+ max-frequency = <150000000>;
+ mmc-hs200-1_8v;
+ mmc-ddr-1_8v;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
index ceade5962899..1e43527aa196 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dts
+++ b/arch/arm/boot/dts/rk3288-tinker.dts
@@ -5,503 +5,9 @@
/dts-v1/;
-#include "rk3288.dtsi"
-#include <dt-bindings/input/input.h>
+#include "rk3288-tinker.dtsi"
/ {
- model = "Rockchip RK3288 Tinker Board";
+ model = "Rockchip RK3288 Asus Tinker Board";
compatible = "asus,rk3288-tinker", "rockchip,rk3288";
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- memory {
- reg = <0x0 0x0 0x0 0x80000000>;
- device_type = "memory";
- };
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- autorepeat;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pwrbtn>;
-
- button@0 {
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- label = "GPIO Key Power";
- linux,input-type = <1>;
- wakeup-source;
- debounce-interval = <100>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- act-led {
- gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger="mmc0";
- };
-
- heartbeat-led {
- gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger="heartbeat";
- };
-
- pwr-led {
- gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,name = "rockchip,tinker-codec";
- simple-audio-card,mclk-fs = <512>;
-
- simple-audio-card,codec {
- sound-dai = <&hdmi>;
- };
-
- simple-audio-card,cpu {
- sound-dai = <&i2s>;
- };
- };
-
- vcc_sys: vsys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_sd: sdmmc-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_pwr>;
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <100000>;
- vin-supply = <&vcc_io>;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- clock_in_out = "input";
- phy-mode = "rgmii";
- phy-supply = <&vcc33_lan>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio4 7 0>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
- tx_delay = <0x30>;
- rx_delay = <0x10>;
- status = "ok";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
- <&gpio0 12 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
- vcc8-supply = <&vcc_io>;
- vcc9-supply = <&vcc_io>;
- vcc10-supply = <&vcc_io>;
- vcc11-supply = <&vcc_sys>;
- vcc12-supply = <&vcc_io>;
- vddio-supply = <&vcc_io>;
-
- regulators {
- vdd_cpu: DCDC_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-name = "vdd_arm";
- regulator-ramp-delay = <6000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: DCDC_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd_gpu";
- regulator-ramp-delay = <6000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc_ddr";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_io: DCDC_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_io";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc18_ldo1: LDO_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_ldo1";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc33_mipi: LDO_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc33_mipi";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_10: LDO_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd_10";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc18_codec: LDO_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_codec";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vccio_sd: LDO_REG5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vccio_sd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vdd10_lcd: LDO_REG6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd10_lcd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_18: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_18";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc18_lcd: LDO_REG8 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_lcd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc33_sd: SWITCH_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc33_sd";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc33_lan: SWITCH_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc33_lan";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&i2s {
- #sound-dai-cells = <0>;
- status = "okay";
-};
-
-&io_domains {
- status = "okay";
-
- sdcard-supply = <&vccio_sd>;
-};
-
-&pinctrl {
- pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
- drive-strength = <8>;
- };
-
- pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
- bias-pull-up;
- drive-strength = <8>;
- };
-
- backlight {
- bl_en: bl-en {
- rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- buttons {
- pwrbtn: pwrbtn {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- eth_phy {
- eth_phy_pwr: eth-phy-pwr {
- rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int: pmic-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
- &pcfg_pull_up>;
- };
-
- dvs_1: dvs-1 {
- rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
- &pcfg_pull_down>;
- };
-
- dvs_2: dvs-2 {
- rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
- &pcfg_pull_down>;
- };
- };
-
- sdmmc {
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 20 RK_FUNC_1 \
- &pcfg_pull_none_drv_8ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
- };
-
- sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb {
- host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pwr_3g: pwr-3g {
- rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcc18_ldo1>;
- status ="okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <200>;
- disable-wp; /* wp not hooked up */
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- status = "okay";
- vmmc-supply = <&vcc33_sd>;
- vqmmc-supply = <&vccio_sd>;
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&uart3 {
- status = "okay";
-};
-
-&uart4 {
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host1 {
- status = "okay";
-};
-
-&usb_otg {
- status= "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
-&wdt {
- status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
new file mode 100644
index 000000000000..aa107ee41b8b
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -0,0 +1,502 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include "rk3288.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory {
+ reg = <0x0 0x0 0x0 0x80000000>;
+ device_type = "memory";
+ };
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ button@0 {
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ wakeup-source;
+ debounce-interval = <100>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ act-led {
+ gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger="mmc0";
+ };
+
+ heartbeat-led {
+ gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger="heartbeat";
+ };
+
+ pwr-led {
+ gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "rockchip,tinker-codec";
+ simple-audio-card,mclk-fs = <512>;
+
+ simple-audio-card,codec {
+ sound-dai = <&hdmi>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s>;
+ };
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vcc_io>;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ clock_in_out = "input";
+ phy-mode = "rgmii";
+ phy-supply = <&vcc33_lan>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "ok";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
+ <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_io>;
+ vcc9-supply = <&vcc_io>;
+ vcc10-supply = <&vcc_io>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc_io>;
+ vddio-supply = <&vcc_io>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_arm";
+ regulator-ramp-delay = <6000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ regulator-ramp-delay = <6000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc18_ldo1: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_ldo1";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc33_mipi: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33_mipi";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc18_codec: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_codec";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd10_lcd: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_lcd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc33_sd: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc33_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc33_lan: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc33_lan";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2s {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ sdcard-supply = <&vccio_sd>;
+};
+
+&pinctrl {
+ pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ backlight {
+ bl_en: bl-en {
+ rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ eth_phy {
+ eth_phy_pwr: eth-phy-pwr {
+ rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
+ &pcfg_pull_up>;
+ };
+
+ dvs_1: dvs-1 {
+ rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
+ &pcfg_pull_down>;
+ };
+
+ dvs_2: dvs-2 {
+ rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
+ &pcfg_pull_down>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <6 20 RK_FUNC_1 \
+ &pcfg_pull_none_drv_8ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pwr_3g: pwr-3g {
+ rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc18_ldo1>;
+ status ="okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp; /* wp not hooked up */
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ status = "okay";
+ vmmc-supply = <&vcc33_sd>;
+ vqmmc-supply = <&vccio_sd>;
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host1 {
+ status = "okay";
+};
+
+&usb_otg {
+ status= "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 67358562a6ea..75f454a210d6 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -120,7 +120,7 @@
interrupts = <30>;
wakeup-interrupt-controller {
- compatible = "samsung,exynos4210-wakeup-eint";
+ compatible = "samsung,s5pv210-wakeup-eint";
interrupts = <16>;
interrupt-parent = <&vic0>;
};
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 61f68e5c48e9..843052f14f1c 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
/ {
model = "Atmel SAMA5D2 family SoC";
@@ -58,6 +59,8 @@
serial1 = &uart3;
tcb0 = &tcb0;
tcb1 = &tcb1;
+ i2s0 = &i2s0;
+ i2s1 = &i2s1;
};
cpus {
@@ -84,10 +87,11 @@
clocks = <&mck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
@@ -99,9 +103,11 @@
clocks = <&mck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
@@ -323,44 +329,6 @@
};
};
- nand0: nand@80000000 {
- compatible = "atmel,sama5d2-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- reg = < /* EBI CS3 */
- 0x80000000 0x08000000
- /* SMC PMECC regs */
- 0xf8014070 0x00000490
- /* SMC PMECC Error Location regs */
- 0xf8014500 0x00000200
- /* ROM Galois tables */
- 0x00040000 0x00018000
- >;
- interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
- atmel,nand-addr-offset = <21>;
- atmel,nand-cmd-offset = <22>;
- atmel,nand-has-dma;
- atmel,has-pmecc;
- atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
- status = "disabled";
-
- nfc@c0000000 {
- compatible = "atmel,sama5d3-nfc";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = < /* NFC Command Registers */
- 0xc0000000 0x08000000
- /* NFC HSMC regs */
- 0xf8014000 0x00000070
- /* NFC SRAM banks */
- 0x00100000 0x00100000
- >;
- clocks = <&hsmc_clk>;
- atmel,write-by-sram;
- };
- };
-
sdmmc0: sdio-host@a0000000 {
compatible = "atmel,sama5d2-sdhci";
reg = <0xa0000000 0x300>;
@@ -992,6 +960,24 @@
atmel,clk-output-range = <0 100000000>;
};
};
+
+ i2s_clkmux {
+ compatible = "atmel,sama5d2-clk-i2s-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2s0muxck: i2s0_muxclk {
+ clocks = <&i2s0_clk>, <&i2s0_gclk>;
+ #clock-cells = <0>;
+ reg = <0>;
+ };
+
+ i2s1muxck: i2s1_muxclk {
+ clocks = <&i2s1_clk>, <&i2s1_gclk>;
+ #clock-cells = <0>;
+ reg = <1>;
+ };
+ };
};
qspi0: spi@f0020000 {
@@ -1295,6 +1281,24 @@
clocks = <&clk32k>;
};
+ i2s0: i2s@f8050000 {
+ compatible = "atmel,sama5d2-i2s";
+ reg = <0xf8050000 0x100>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(31))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(32))>;
+ dma-names = "tx", "rx";
+ clocks = <&i2s0_clk>, <&i2s0_gclk>;
+ clock-names = "pclk", "gclk";
+ assigned-clocks = <&i2s0muxck>;
+ assigned-clock-parents = <&i2s0_gclk>;
+ status = "disabled";
+ };
+
can0: can@f8054000 {
compatible = "bosch,m_can";
reg = <0xf8054000 0x4000>, <0x210000 0x4000>;
@@ -1437,6 +1441,17 @@
atmel,max-sample-rate-hz = <20000000>;
atmel,startup-time-ms = <4>;
atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+
+ resistive_touch: resistive-touch {
+ compatible = "resistive-adc-touch";
+ io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+ io-channel-names = "x", "y", "pressure";
+ touchscreen-min-pressure = <50000>;
status = "disabled";
};
@@ -1488,6 +1503,24 @@
status = "disabled";
};
+ i2s1: i2s@fc04c000 {
+ compatible = "atmel,sama5d2-i2s";
+ reg = <0xfc04c000 0x100>;
+ interrupts = <55 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(33))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(34))>;
+ dma-names = "tx", "rx";
+ clocks = <&i2s1_clk>, <&i2s1_gclk>;
+ clock-names = "pclk", "gclk";
+ assigned-clocks = <&i2s1muxck>;
+ assigned-parrents = <&i2s1_gclk>;
+ status = "disabled";
+ };
+
can1: can@fc050000 {
compatible = "bosch,m_can";
reg = <0xfc050000 0x4000>, <0x210000 0x4000>;
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 92a35a1942b6..7371f2a0460f 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -1323,13 +1323,13 @@
};
};
- rstc@fc068600 {
+ reset_controller: rstc@fc068600 {
compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
reg = <0xfc068600 0x10>;
clocks = <&clk32k>;
};
- shdwc@fc068610 {
+ shutdown_controller: shdwc@fc068610 {
compatible = "atmel,at91sam9x5-shdwc";
reg = <0xfc068610 0x10>;
clocks = <&clk32k>;
@@ -1342,7 +1342,7 @@
clocks = <&h32ck>;
};
- watchdog@fc068640 {
+ watchdog: watchdog@fc068640 {
compatible = "atmel,sama5d4-wdt";
reg = <0xfc068640 0x10>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -1376,7 +1376,7 @@
};
- pinctrl@fc06a000 {
+ pinctrl: pinctrl@fc06a000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index b38f8c240558..2d300396f0ed 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -22,8 +22,6 @@
#size-cells = <1>;
aliases {
- ethernet0 = &gmac0;
- ethernet1 = &gmac1;
serial0 = &uart0;
serial1 = &uart1;
timer0 = &timer0;
@@ -483,10 +481,17 @@
clk-gate = <0xa0 9>;
};
+ nand_ecc_clk: nand_ecc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&nand_x_clk>;
+ clk-gate = <0xa0 9>;
+ };
+
nand_clk: nand_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-gate-clk";
- clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+ clocks = <&nand_x_clk>;
clk-gate = <0xa0 10>;
fixed-divider = <4>;
};
@@ -754,7 +759,8 @@
reg-names = "nand_data", "denali_reg";
interrupts = <0x0 0x90 0x4>;
dma-mask = <0xffffffff>;
- clocks = <&nand_x_clk>;
+ clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+ clock-names = "nand", "nand_x", "ecc";
status = "disabled";
};
@@ -841,6 +847,8 @@
reg = <0xffc08000 0x1000>;
clocks = <&l4_sp_clk>;
clock-names = "timer";
+ resets = <&rst SPTIMER0_RESET>;
+ reset-names = "timer";
};
timer1: timer1@ffc09000 {
@@ -849,6 +857,8 @@
reg = <0xffc09000 0x1000>;
clocks = <&l4_sp_clk>;
clock-names = "timer";
+ resets = <&rst SPTIMER1_RESET>;
+ reset-names = "timer";
};
timer2: timer2@ffd00000 {
@@ -857,6 +867,8 @@
reg = <0xffd00000 0x1000>;
clocks = <&osc1>;
clock-names = "timer";
+ resets = <&rst OSC1TIMER0_RESET>;
+ reset-names = "timer";
};
timer3: timer3@ffd01000 {
@@ -865,6 +877,8 @@
reg = <0xffd01000 0x1000>;
clocks = <&osc1>;
clock-names = "timer";
+ resets = <&rst OSC1TIMER1_RESET>;
+ reset-names = "timer";
};
uart0: serial0@ffc02000 {
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index a4dcb68f4322..59ef13e37536 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -377,13 +377,28 @@
clk-gate = <0xC8 11>;
};
- nand_clk: nand_clk {
+ nand_x_clk: nand_x_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-gate-clk";
clocks = <&l4_mp_clk>;
clk-gate = <0xC8 10>;
};
+ nand_ecc_clk: nand_ecc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&nand_x_clk>;
+ clk-gate = <0xC8 10>;
+ };
+
+ nand_clk: nand_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&nand_x_clk>;
+ fixed-divider = <4>;
+ clk-gate = <0xC8 10>;
+ };
+
spi_m_clk: spi_m_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-gate-clk";
@@ -613,7 +628,7 @@
status = "disabled";
};
- sdr: sdr@ffc25000 {
+ sdr: sdr@ffcfb100 {
compatible = "altr,sdr-ctl", "syscon";
reg = <0xffcfb100 0x80>;
};
@@ -650,7 +665,8 @@
reg-names = "nand_data", "denali_reg";
interrupts = <0 99 4>;
dma-mask = <0xffffffff>;
- clocks = <&nand_clk>;
+ clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+ clock-names = "nand", "nand_x", "ecc";
status = "disabled";
};
@@ -760,7 +776,7 @@
timer@ffffc600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xffffc600 0x100>;
- interrupts = <1 13 0xf04>;
+ interrupts = <1 13 0xf01>;
clocks = <&mpu_periph_clk>;
};
@@ -770,6 +786,8 @@
reg = <0xffc02700 0x100>;
clocks = <&l4_sp_clk>;
clock-names = "timer";
+ resets = <&rst SPTIMER0_RESET>;
+ reset-names = "timer";
};
timer1: timer1@ffc02800 {
@@ -778,6 +796,8 @@
reg = <0xffc02800 0x100>;
clocks = <&l4_sp_clk>;
clock-names = "timer";
+ resets = <&rst SPTIMER1_RESET>;
+ reset-names = "timer";
};
timer2: timer2@ffd00000 {
@@ -786,6 +806,8 @@
reg = <0xffd00000 0x100>;
clocks = <&l4_sys_free_clk>;
clock-names = "timer";
+ resets = <&rst L4SYSTIMER0_RESET>;
+ reset-names = "timer";
};
timer3: timer3@ffd00100 {
@@ -794,6 +816,8 @@
reg = <0xffd01000 0x100>;
clocks = <&l4_sys_free_clk>;
clock-names = "timer";
+ resets = <&rst L4SYSTIMER1_RESET>;
+ reset-names = "timer";
};
uart0: serial0@ffc02000 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
index b280e6494193..31b01a998b2e 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
@@ -88,7 +88,7 @@
status = "okay";
clock-frequency = <100000>;
- adxl345: adxl345@0 {
+ adxl345: adxl345@53 {
compatible = "adi,adxl345";
reg = <0x53>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
index 53bf99eef66d..031c721441ff 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -21,8 +21,13 @@
model = "EBV SOCrates";
compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga";
+ aliases {
+ ethernet0 = &gmac1;
+ };
+
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory@0 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
index f50b19447de6..e61efe16e79c 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -54,7 +54,8 @@
compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory@0 {
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 2310a4e97768..e6ed7c0354a2 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -15,9 +15,14 @@
#include <dt-bindings/arm/ux500_pm_domains.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/ste-ab8500.h>
-#include "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -67,9 +72,11 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU0>;
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel_in_port0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
};
};
};
@@ -81,9 +88,11 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU1>;
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel_in_port1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
};
};
};
@@ -94,32 +103,29 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output ports */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel_out_port: endpoint {
remote-endpoint =
<&replicator_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
@@ -131,11 +137,10 @@
clocks = <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port@0 {
reg = <0>;
replicator_out_port0: endpoint {
@@ -148,12 +153,11 @@
remote-endpoint = <&etb_in_port>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel_out_port>;
};
};
@@ -166,10 +170,11 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
@@ -180,10 +185,11 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etb_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ etb_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
@@ -197,7 +203,7 @@
<0xa0410100 0x100>;
};
- scu@a04100000 {
+ scu@a0410000 {
compatible = "arm,cortex-a9-scu";
reg = <0xa0410000 0x100>;
};
@@ -487,7 +493,7 @@
};
prcmu: prcmu@80157000 {
- compatible = "stericsson,db8500-prcmu";
+ compatible = "stericsson,db8500-prcmu", "syscon";
reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
@@ -878,7 +884,7 @@
power-domains = <&pm_domains DOMAIN_VAPE>;
};
- ssp@80002000 {
+ spi@80002000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80002000 0x1000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -892,7 +898,7 @@
power-domains = <&pm_domains DOMAIN_VAPE>;
};
- ssp@80003000 {
+ spi@80003000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80003000 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
index 5c5cea232743..1ec193b0c506 100644
--- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
@@ -607,16 +607,20 @@
mcde {
lcd_default_mode: lcd_default {
- default_mux {
+ default_mux1 {
/* Mux in VSI0 and all the data lines */
function = "lcd";
groups =
"lcdvsi0_a_1", /* VSI0 for LCD */
"lcd_d0_d7_a_1", /* Data lines */
"lcd_d8_d11_a_1", /* TV-out */
- "lcdaclk_b_1", /* Clock line for TV-out */
"lcdvsi1_a_1"; /* VSI1 for HDMI */
};
+ default_mux2 {
+ function = "lcda";
+ groups =
+ "lcdaclk_b_1"; /* Clock line for TV-out */
+ };
default_cfg1 {
pins =
"GPIO68_E1", /* VSI0 */
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 9e359e4f342e..feb682a3d363 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -15,6 +15,7 @@
/ {
memory {
+ device_type = "memory";
reg = <0x00000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 3f14b4df69b4..94eeb7f1c947 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -57,7 +57,7 @@
};
};
- ssp@80002000 {
+ spi@80002000 {
/*
* On the first generation boards, this SSP/SPI port was connected
* to the AB8500.
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index b0b94d053098..2de3ce79e496 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -26,6 +26,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x20000000>;
};
@@ -376,7 +377,7 @@
pinctrl-1 = <&i2c3_sleep_mode>;
};
- ssp@80002000 {
+ spi@80002000 {
pinctrl-names = "default";
pinctrl-0 = <&ssp0_snowball_mode>;
};
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 62ecb6a2fa39..1bd1aba3322f 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -442,7 +442,7 @@
dma-names = "rx";
};
- spi: ssp@c0006000 {
+ spi: spi@c0006000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xc0006000 0x1000>;
interrupt-parent = <&vica>;
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index 155caa8c002a..4ee6d51d8d1e 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -61,8 +61,11 @@
compatible = "simple-audio-card";
simple-audio-card,name = "STI-B2260";
status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
- simple-audio-card,dai-link0 {
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
/* DAC */
format = "i2s";
mclk-fs = <128>;
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 4dedfcb0fcb3..97e05f55fb6e 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -27,8 +27,11 @@
compatible = "simple-audio-card";
simple-audio-card,name = "STI-B2120";
status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
- simple-audio-card,dai-link0 {
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
/* HDMI */
format = "i2s";
mclk-fs = <128>;
@@ -41,7 +44,8 @@
};
};
- simple-audio-card,dai-link1 {
+ simple-audio-card,dai-link@1 {
+ reg = <1>;
/* DAC */
format = "i2s";
mclk-fs = <256>;
@@ -55,7 +59,8 @@
};
};
- simple-audio-card,dai-link2 {
+ simple-audio-card,dai-link@2 {
+ reg = <2>;
/* SPDIF */
format = "left_j";
mclk-fs = <128>;
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 7eb786a2d624..ed7d7f46465e 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -264,8 +264,7 @@
&sdio {
status = "okay";
vmmc-supply = <&mmc_vcard>;
- cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "opendrain";
pinctrl-0 = <&sdio_pins>;
pinctrl-1 = <&sdio_pins_od>;
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index e35d782e7e5f..8d6f028ae285 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -58,7 +58,7 @@
clock-frequency = <0>;
};
- clk-lse {
+ clk_lse: clk-lse {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 3ee768cb86fc..7937b43d7788 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -210,8 +210,7 @@
&sdio {
status = "okay";
vmmc-supply = <&mmc_vcard>;
- cd-gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
broken-cd;
pinctrl-names = "default", "opendrain";
pinctrl-0 = <&sdio_pins>;
diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
index f9ad71f7c807..e3a7bd338d61 100644
--- a/arch/arm/boot/dts/stm32f746-disco.dts
+++ b/arch/arm/boot/dts/stm32f746-disco.dts
@@ -101,8 +101,7 @@
&sdio1 {
status = "okay";
vmmc-supply = <&mmc_vcard>;
- cd-gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "opendrain";
pinctrl-0 = <&sdio_pins_a>;
pinctrl-1 = <&sdio_pins_od_a>;
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index 677276ba4dbe..483d896e2bc1 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -126,8 +126,7 @@
&sdio2 {
status = "okay";
vmmc-supply = <&mmc_vcard>;
- cd-gpios = <&gpioi 15 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
broken-cd;
pinctrl-names = "default", "opendrain";
pinctrl-0 = <&sdio_pins_b>;
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 637beffe5067..cbdd69ca9e7a 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -472,7 +472,7 @@
interrupt-parent = <&exti>;
interrupts = <17 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "alarm";
- st,syscfg = <&pwrcfg>;
+ st,syscfg = <&pwrcfg 0x00 0x100>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 372bc2ea6b92..063ee8ac5dcb 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "stm32mp157c-ed1.dts"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
@@ -19,6 +20,58 @@
serial0 = &uart4;
ethernet0 = &ethernet0;
};
+
+ panel_backlight: panel-backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;
+ default-on;
+ status = "okay";
+ };
+};
+
+&cec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cec_pins_a>;
+ status = "okay";
+};
+
+&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <&ltdc_ep0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&dsi_panel_in>;
+ };
+ };
+ };
+
+ panel-dsi@0 {
+ compatible = "raydium,rm68200";
+ reg = <0>;
+ reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
+ backlight = <&panel_backlight>;
+ status = "okay";
+
+ port {
+ dsi_panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
};
&ethernet0 {
@@ -40,12 +93,6 @@
};
};
-&cec {
- pinctrl-names = "default";
- pinctrl-0 = <&cec_pins_a>;
- status = "okay";
-};
-
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
@@ -62,6 +109,20 @@
status = "okay";
};
+&ltdc {
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ltdc_ep0_out: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+};
+
&m_can1 {
pinctrl-names = "default";
pinctrl-0 = <&m_can1_pins_a>;
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 185541a5b69f..c50c36baba75 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -947,7 +947,7 @@
dma-requests = <48>;
};
- qspi: qspi@58003000 {
+ qspi: spi@58003000 {
compatible = "st,stm32f469-qspi";
reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
reg-names = "qspi", "qspi_mm";
diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
index 8acbaab14fe5..d2a2eb8b3f26 100644
--- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
@@ -92,7 +92,8 @@
*/
clock-frequency = <400000>;
- touchscreen: touchscreen {
+ touchscreen: touchscreen@40 {
+ reg = <0x40>;
interrupt-parent = <&pio>;
interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 8bfb36651177..9cd65c46720b 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -108,6 +108,21 @@
};
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+ cma_pool: cma@4a000000 {
+ compatible = "shared-dma-pool";
+ size = <0x6000000>;
+ alloc-ranges = <0x4a000000 0x6000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
soc@1c00000 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -294,6 +309,17 @@
};
};
+ video-codec@1c0e000 {
+ compatible = "allwinner,sun5i-a13-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_VE>;
+ interrupts = <53>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c0f000 0x1000>;
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 9c52712af241..02e40da9f028 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -174,6 +174,21 @@
reg = <0x40000000 0x80000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+ cma_pool: cma@4a000000 {
+ compatible = "shared-dma-pool";
+ size = <0x6000000>;
+ alloc-ranges = <0x4a000000 0x6000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -479,6 +494,17 @@
};
};
+ video-codec@1c0e000 {
+ compatible = "allwinner,sun7i-a20-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_VE>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 4e92741b24a7..c1cc8f09dd9a 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -190,6 +190,21 @@
reg = <0x40000000 0x80000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+ cma_pool: cma@4a000000 {
+ compatible = "shared-dma-pool";
+ size = <0x6000000>;
+ alloc-ranges = <0x4a000000 0x6000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
sound: sound {
compatible = "simple-audio-card";
simple-audio-card,name = "sun8i-a33-audio";
@@ -254,6 +269,17 @@
};
};
+ video-codec@01c0e000 {
+ compatible = "allwinner,sun8i-a33-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_VE>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
crypto: crypto-engine@1c15000 {
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index c7ce4158d6c8..742d2946b08b 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -191,6 +191,11 @@
status = "okay";
};
+&r_cir {
+ clock-frequency = <3000000>;
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 00a02b037320..5617dd387fd3 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -990,6 +990,19 @@
reg = <0x1f01c00 0x400>;
};
+ r_cir: ir@1f02000 {
+ compatible = "allwinner,sun8i-a83t-ir",
+ "allwinner,sun5i-a13-ir";
+ clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+ clock-names = "apb", "ir";
+ resets = <&r_ccu RST_APB0_IR>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x01f02000 0x400>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_cir_pin>;
+ status = "disabled";
+ };
+
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-a83t-r-pinctrl";
reg = <0x01f02c00 0x400>;
@@ -1002,6 +1015,11 @@
interrupt-controller;
#interrupt-cells = <3>;
+ r_cir_pin: r-cir-pin {
+ pins = "PL12";
+ function = "s_cir_rx";
+ };
+
r_rsb_pins: r-rsb-pins {
pins = "PL0", "PL1";
function = "s_rsb";
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts
new file mode 100644
index 000000000000..fc4a8c3d084d
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-bananapi-m2-plus-v1.2.dtsi"
+
+/ {
+ model = "Banana Pi BPI-M2-Plus v1.2 H3";
+ compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun8i-h3";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
index 30540dc8e0c5..195a75da13f1 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -42,195 +42,9 @@
/dts-v1/;
#include "sun8i-h3.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "sunxi-bananapi-m2-plus.dtsi"
/ {
- model = "Banana Pi BPI-M2-Plus";
+ model = "Banana Pi BPI-M2-Plus H3";
compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
-
- aliases {
- ethernet0 = &emac;
- serial0 = &uart0;
- serial1 = &uart1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&hdmi_out_con>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
-
- pwr_led {
- label = "bananapi-m2-plus:red:pwr";
- gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
- default-state = "on";
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
-
- sw4 {
- label = "power";
- linux,code = <BTN_0>;
- gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
- };
- };
-
- reg_gmac_3v3: gmac-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "gmac-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <100000>;
- enable-active-high;
- gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
- };
-
- wifi_pwrseq: wifi_pwrseq {
- compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- };
-};
-
-&de {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&ehci2 {
- status = "okay";
-};
-
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <&reg_gmac_3v3>;
- phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
-
- status = "okay";
-};
-
-&external_mdio {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
-};
-
-&hdmi {
- status = "okay";
-};
-
-&hdmi_out {
- hdmi_out_con: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
-};
-
-&ir {
- pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
- status = "okay";
-};
-
-&mmc0 {
- vmmc-supply = <&reg_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
- status = "okay";
-};
-
-&mmc1 {
- vmmc-supply = <&reg_vcc3v3>;
- vqmmc-supply = <&reg_vcc3v3>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-
- brcmf: wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- interrupt-parent = <&pio>;
- interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
- interrupt-names = "host-wake";
- };
-};
-
-&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_8bit_pins>;
- vmmc-supply = <&reg_vcc3v3>;
- vqmmc-supply = <&reg_vcc3v3>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&ohci2 {
- status = "okay";
-};
-
-&reg_usb0_vbus {
- gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
- usb0_vbus-supply = <&reg_usb0_vbus>;
- /* USB host VBUS is on as long as VCC-IO is on */
- status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
new file mode 100644
index 000000000000..c834048c325e
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ * Copyright (C) 2018 Diego Rondini <diego.rondini@kynetics.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "OrangePi Zero Plus2 H3";
+ compatible = "xunlong,orangepi-zero-plus2-h3", "allwinner,sun8i-h3";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&de {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <&reg_vcc3v3>;
+ vqmmc-supply = <&reg_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index f0096074a467..3ecfabb10151 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -119,6 +119,20 @@
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ cma_pool: cma@4a000000 {
+ compatible = "shared-dma-pool";
+ size = <0x6000000>;
+ alloc-ranges = <0x4a000000 0x6000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
soc {
system-control@1c00000 {
compatible = "allwinner,sun8i-h3-system-control";
@@ -142,6 +156,17 @@
};
};
+ video-codec@01c0e000 {
+ compatible = "allwinner,sun8i-h3-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_VE>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
mali: gpu@1c40000 {
compatible = "allwinner,sun8i-h3-mali", "arm,mali-400";
reg = <0x01c40000 0x10000>;
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index c39b9169ea64..438b7b44dab3 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -105,6 +105,12 @@
};
};
+&ahci {
+ ahci-supply = <&reg_dldo4>;
+ phy-supply = <&reg_eldo3>;
+ status = "okay";
+};
+
&de {
status = "okay";
};
@@ -159,8 +165,7 @@
&mmc0 {
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
- cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
- cd-inverted;
+ cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
status = "okay";
};
@@ -251,6 +256,18 @@
regulator-name = "vcc-wifi";
};
+&reg_dldo4 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdd1v2-sata";
+};
+
&tcon_tv0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 5f547c161baf..6f4c9ca5a3ee 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -529,6 +529,19 @@
#size-cells = <0>;
};
+ ahci: sata@1c18000 {
+ compatible = "allwinner,sun8i-r40-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+ resets = <&ccu RST_BUS_SATA>;
+ resets-name = "ahci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ };
+
gmac: ethernet@1c50000 {
compatible = "allwinner,sun8i-r40-gmac";
syscon = <&ccu>;
diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
index 880096c7e252..5e8a95af89b8 100644
--- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
@@ -69,7 +69,8 @@
*/
clock-frequency = <400000>;
- touchscreen: touchscreen@0 {
+ touchscreen: touchscreen@40 {
+ reg = <0x40>;
interrupt-parent = <&pio>;
interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index 35859d8f3267..bf97f6244c23 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -95,7 +95,7 @@
&i2c0 {
status = "okay";
- axp22x: pmic@68 {
+ axp22x: pmic@34 {
compatible = "x-powers,axp221";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 25591d6883ef..d9532fb1ef65 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -1196,7 +1196,7 @@
};
};
- r_rsb: i2c@8003400 {
+ r_rsb: rsb@8003400 {
compatible = "allwinner,sun8i-a23-rsb";
reg = <0x08003400 0x400>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
new file mode 100644
index 000000000000..53edd1faee99
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include "sunxi-bananapi-m2-plus.dtsi"
+
+/ {
+ /*
+ * Bananapi M2+ v1.2 uses a GPIO line to change the effective
+ * resistance on the CPU regulator's feedback pin.
+ */
+ reg_vdd_cpux: vdd-cpux {
+ compatible = "regulator-gpio";
+ regulator-name = "vdd-cpux";
+ regulator-type = "voltage";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <50>; /* 4ms */
+ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+ gpios-states = <0x1>;
+ states = <1100000 0x0
+ 1300000 0x1>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&reg_vdd_cpux>;
+};
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
new file mode 100644
index 000000000000..b3283aeb5b7d
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
@@ -0,0 +1,231 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+
+ pwr_led {
+ label = "bananapi-m2-plus:red:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+ default-state = "on";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+
+ sw4 {
+ label = "power";
+ linux,code = <BTN_0>;
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+ };
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <&reg_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+
+ status = "okay";
+};
+
+&external_mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <&reg_vcc3v3>;
+ vqmmc-supply = <&reg_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&pio>;
+ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <&reg_vcc3v3>;
+ vqmmc-supply = <&reg_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&reg_usb0_vbus {
+ gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ usb0_vbus-supply = <&reg_usb0_vbus>;
+ /* USB host VBUS is on as long as VCC-IO is on */
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index fc6131315c47..4b1530ebe427 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -816,7 +816,7 @@
clock-names = "apb", "ir";
resets = <&r_ccu RST_APB0_IR>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x01f02000 0x40>;
+ reg = <0x01f02000 0x400>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index a6ad759dddb4..eaee10ef6512 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -72,6 +72,7 @@
host1x@50000000 {
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <&reg_5v0>;
};
};
@@ -122,7 +123,7 @@
/*
* GEN2_I2C: I2C2_SDA/SCL (DDC) on MXM3 pin 205/207 (e.g. display EDID)
*/
- hdmi_ddc: i2c@7000c400 {
+ i2c@7000c400 {
status = "okay";
};
@@ -141,29 +142,19 @@
spi@7000d400 {
status = "okay";
spi-max-frequency = <50000000>;
-
- spidev0: spidev@0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
};
/* SPI4: Apalis SPI2 */
spi@7000da00 {
status = "okay";
spi-max-frequency = <50000000>;
-
- spidev1: spidev@0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
};
/* Apalis Serial ATA */
sata@70020000 {
status = "okay";
+ target-5v-supply = <&reg_5v0>;
+ target-12v-supply = <&reg_12v0>;
};
hda@70030000 {
@@ -177,18 +168,18 @@
/* Apalis MMC1 */
sdhci@700b0000 {
status = "okay";
+ bus-width = <4>;
/* MMC1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
- bus-width = <4>;
vqmmc-supply = <&vddio_sdmmc1>;
};
/* Apalis SD1 */
sdhci@700b0400 {
status = "okay";
+ bus-width = <4>;
/* SD1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
- bus-width = <4>;
vqmmc-supply = <&vddio_sdmmc3>;
};
@@ -225,11 +216,12 @@
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 3 5000000>; /* BKL1_PWM */
brightness-levels = <255 231 223 207 191 159 127 0>;
default-brightness-level = <6>;
/* BKL1_ON */
enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+ power-supply = <&reg_3v3>;
+ pwms = <&pwm 3 5000000>; /* BKL1_PWM */
};
gpio-keys {
@@ -244,6 +236,13 @@
};
};
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
reg_5v0: regulator-5v0 {
compatible = "regulator-fixed";
regulator-name = "5V_SW";
@@ -251,6 +250,13 @@
regulator-max-microvolt = <5000000>;
};
+ reg_12v0: regulator-12v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "12V_SW";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
/* USBO1_EN */
reg_usbo1_vbus: regulator-usbo1-vbus {
compatible = "regulator-fixed";
@@ -276,7 +282,7 @@
&gpio {
/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
- pex_perst_n {
+ pex-perst-n {
gpio-hog;
gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
index 8a8d5fa0ecd1..7961eb4bd803 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
@@ -11,7 +11,8 @@
/ {
model = "Toradex Apalis TK1 on Apalis Evaluation Board";
compatible = "toradex,apalis-tk1-v1.2-eval", "toradex,apalis-tk1-eval",
- "toradex,apalis-tk1", "nvidia,tegra124";
+ "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1",
+ "nvidia,tegra124";
aliases {
rtc0 = "/i2c@7000c000/rtc@68";
@@ -36,6 +37,7 @@
host1x@50000000 {
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <&reg_5v0>;
};
};
@@ -98,7 +100,7 @@
* I2C4 (DDC): I2C4_SDA/SCL (DDC) on MXM3 pin 205/207
* (e.g. display EDID)
*/
- hdmi_ddc: i2c@7000c700 {
+ i2c@7000c700 {
status = "okay";
};
@@ -106,29 +108,19 @@
spi@7000d400 {
status = "okay";
spi-max-frequency = <50000000>;
-
- spidev0: spidev@0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
};
/* SPI4: Apalis SPI2 */
spi@7000da00 {
status = "okay";
spi-max-frequency = <50000000>;
-
- spidev1: spidev@0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
};
/* Apalis Serial ATA */
sata@70020000 {
status = "okay";
+ target-5v-supply = <&reg_5v0>;
+ target-12v-supply = <&reg_12v0>;
};
hda@70030000 {
@@ -142,18 +134,18 @@
/* Apalis MMC1 */
sdhci@700b0000 {
status = "okay";
+ bus-width = <4>;
/* MMC1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
- bus-width = <4>;
vqmmc-supply = <&vddio_sdmmc1>;
};
/* Apalis SD1 */
sdhci@700b0400 {
status = "okay";
+ bus-width = <4>;
/* SD1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
- bus-width = <4>;
vqmmc-supply = <&vddio_sdmmc3>;
};
@@ -190,11 +182,12 @@
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 3 5000000>; /* BKL1_PWM */
brightness-levels = <255 231 223 207 191 159 127 0>;
default-brightness-level = <6>;
/* BKL1_ON */
enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+ power-supply = <&reg_3v3>;
+ pwms = <&pwm 3 5000000>; /* BKL1_PWM */
};
gpio-keys {
@@ -209,6 +202,13 @@
};
};
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
reg_5v0: regulator-5v0 {
compatible = "regulator-fixed";
regulator-name = "5V_SW";
@@ -216,6 +216,13 @@
regulator-max-microvolt = <5000000>;
};
+ reg_12v0: regulator-12v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "12V_SW";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
/* USBO1_EN */
reg_usbo1_vbus: regulator-usbo1-vbus {
compatible = "regulator-fixed";
@@ -241,7 +248,7 @@
&gpio {
/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
- pex_perst_n {
+ pex-perst-n {
gpio-hog;
gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index 573aaa50fff1..367eb8c86098 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -11,23 +11,19 @@
* Compatible for Revisions 2GB: V1.2A
*/
/ {
- model = "Toradex Apalis TK1";
- compatible = "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1",
- "nvidia,tegra124";
-
memory@80000000 {
reg = <0x0 0x80000000 0x0 0x80000000>;
};
pcie@1003000 {
status = "okay";
- avddio-pex-supply = <&vdd_1v05>;
- avdd-pex-pll-supply = <&vdd_1v05>;
- avdd-pll-erefe-supply = <&avdd_1v05>;
- dvddio-pex-supply = <&vdd_1v05>;
- hvdd-pex-pll-e-supply = <&reg_3v3>;
- hvdd-pex-supply = <&reg_3v3>;
- vddio-pex-ctl-supply = <&reg_3v3>;
+ avddio-pex-supply = <&reg_1v05_vdd>;
+ avdd-pex-pll-supply = <&reg_1v05_vdd>;
+ avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+ dvddio-pex-supply = <&reg_1v05_vdd>;
+ hvdd-pex-pll-e-supply = <&reg_module_3v3>;
+ hvdd-pex-supply = <&reg_module_3v3>;
+ vddio-pex-ctl-supply = <&reg_module_3v3>;
/* Apalis PCIe (additional lane Apalis type specific) */
pci@1,0 {
@@ -42,16 +38,21 @@
phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
phy-names = "pcie-0";
status = "okay";
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
};
};
host1x@50000000 {
hdmi@54280000 {
- pll-supply = <&reg_1v05_avdd_hdmi_pll>;
- vdd-supply = <&reg_3v3_avdd_hdmi>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ pll-supply = <&reg_1v05_avdd_hdmi_pll>;
+ vdd-supply = <&reg_3v3_avdd_hdmi>;
};
};
@@ -60,44 +61,44 @@
* Node left disabled on purpose - the bootloader will enable
* it after having set the VPR up
*/
- vdd-supply = <&vdd_gpu>;
+ vdd-supply = <&reg_vdd_gpu>;
};
- pinmux: pinmux@70000868 {
+ pinmux@70000868 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
/* Analogue Audio (On-module) */
- dap3_fs_pp0 {
+ dap3-fs-pp0 {
nvidia,pins = "dap3_fs_pp0";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_din_pp1 {
+ dap3-din-pp1 {
nvidia,pins = "dap3_din_pp1";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap3_dout_pp2 {
+ dap3-dout-pp2 {
nvidia,pins = "dap3_dout_pp2";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_sclk_pp3 {
+ dap3-sclk-pp3 {
nvidia,pins = "dap3_sclk_pp3";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap_mclk1_pw4 {
+ dap-mclk1-pw4 {
nvidia,pins = "dap_mclk1_pw4";
nvidia,function = "extperiph1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -124,7 +125,7 @@
};
/* Apalis CAM1_MCLK */
- cam_mclk_pcc0 {
+ cam-mclk-pcc0 {
nvidia,pins = "cam_mclk_pcc0";
nvidia,function = "vi_alt3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -133,28 +134,28 @@
};
/* Apalis Digital Audio */
- dap2_fs_pa2 {
+ dap2-fs-pa2 {
nvidia,pins = "dap2_fs_pa2";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_sclk_pa3 {
+ dap2-sclk-pa3 {
nvidia,pins = "dap2_sclk_pa3";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_din_pa4 {
+ dap2-din-pa4 {
nvidia,pins = "dap2_din_pa4";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_dout_pa5 {
+ dap2-dout-pa5 {
nvidia,pins = "dap2_dout_pa5";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -167,7 +168,7 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- clk3_out_pee0 {
+ clk3-out-pee0 {
nvidia,pins = "clk3_out_pee0";
nvidia,function = "extperiph3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -176,7 +177,7 @@
};
/* Apalis GPIO */
- usb_vbus_en0_pn4 {
+ usb-vbus-en0-pn4 {
nvidia,pins = "usb_vbus_en0_pn4";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -184,7 +185,7 @@
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
- usb_vbus_en1_pn5 {
+ usb-vbus-en1-pn5 {
nvidia,pins = "usb_vbus_en1_pn5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -192,35 +193,35 @@
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
- pex_l0_rst_n_pdd1 {
+ pex-l0-rst-n-pdd1 {
nvidia,pins = "pex_l0_rst_n_pdd1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l0_clkreq_n_pdd2 {
+ pex-l0-clkreq-n-pdd2 {
nvidia,pins = "pex_l0_clkreq_n_pdd2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l1_rst_n_pdd5 {
+ pex-l1-rst-n-pdd5 {
nvidia,pins = "pex_l1_rst_n_pdd5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l1_clkreq_n_pdd6 {
+ pex-l1-clkreq-n-pdd6 {
nvidia,pins = "pex_l1_clkreq_n_pdd6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dp_hpd_pff0 {
+ dp-hpd-pff0 {
nvidia,pins = "dp_hpd_pff0";
nvidia,function = "dp";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -244,7 +245,7 @@
};
/* Apalis HDMI1_CEC */
- hdmi_cec_pee3 {
+ hdmi-cec-pee3 {
nvidia,pins = "hdmi_cec_pee3";
nvidia,function = "cec";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -254,7 +255,7 @@
};
/* Apalis HDMI1_HPD */
- hdmi_int_pn7 {
+ hdmi-int-pn7 {
nvidia,pins = "hdmi_int_pn7";
nvidia,function = "rsvd1";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -264,7 +265,7 @@
};
/* Apalis I2C1 */
- gen1_i2c_scl_pc4 {
+ gen1-i2c-scl-pc4 {
nvidia,pins = "gen1_i2c_scl_pc4";
nvidia,function = "i2c1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -272,7 +273,7 @@
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- gen1_i2c_sda_pc5 {
+ gen1-i2c-sda-pc5 {
nvidia,pins = "gen1_i2c_sda_pc5";
nvidia,function = "i2c1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -282,7 +283,7 @@
};
/* Apalis I2C3 (CAM) */
- cam_i2c_scl_pbb1 {
+ cam-i2c-scl-pbb1 {
nvidia,pins = "cam_i2c_scl_pbb1";
nvidia,function = "i2c3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -290,7 +291,7 @@
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- cam_i2c_sda_pbb2 {
+ cam-i2c-sda-pbb2 {
nvidia,pins = "cam_i2c_sda_pbb2";
nvidia,function = "i2c3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -300,7 +301,7 @@
};
/* Apalis I2C4 (DDC) */
- ddc_scl_pv4 {
+ ddc-scl-pv4 {
nvidia,pins = "ddc_scl_pv4";
nvidia,function = "i2c4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -308,7 +309,7 @@
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
};
- ddc_sda_pv5 {
+ ddc-sda-pv5 {
nvidia,pins = "ddc_sda_pv5";
nvidia,function = "i2c4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -318,77 +319,77 @@
};
/* Apalis MMC1 */
- sdmmc1_cd_n_pv3 { /* CD# GPIO */
+ sdmmc1-cd-n-pv3 { /* CD# GPIO */
nvidia,pins = "sdmmc1_wp_n_pv3";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- clk2_out_pw5 { /* D5 GPIO */
+ clk2-out-pw5 { /* D5 GPIO */
nvidia,pins = "clk2_out_pw5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat3_py4 {
+ sdmmc1-dat3-py4 {
nvidia,pins = "sdmmc1_dat3_py4";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat2_py5 {
+ sdmmc1-dat2-py5 {
nvidia,pins = "sdmmc1_dat2_py5";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat1_py6 {
+ sdmmc1-dat1-py6 {
nvidia,pins = "sdmmc1_dat1_py6";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat0_py7 {
+ sdmmc1-dat0-py7 {
nvidia,pins = "sdmmc1_dat0_py7";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_clk_pz0 {
+ sdmmc1-clk-pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_cmd_pz1 {
+ sdmmc1-cmd-pz1 {
nvidia,pins = "sdmmc1_cmd_pz1";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- clk2_req_pcc5 { /* D4 GPIO */
+ clk2-req-pcc5 { /* D4 GPIO */
nvidia,pins = "clk2_req_pcc5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */
+ sdmmc3-clk-lb-in-pee5 { /* D6 GPIO */
nvidia,pins = "sdmmc3_clk_lb_in_pee5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- usb_vbus_en2_pff1 { /* D7 GPIO */
+ usb-vbus-en2-pff1 { /* D7 GPIO */
nvidia,pins = "usb_vbus_en2_pff1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -428,7 +429,7 @@
};
/* Apalis SATA1_ACT# */
- dap1_dout_pn2 {
+ dap1-dout-pn2 {
nvidia,pins = "dap1_dout_pn2";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -437,49 +438,49 @@
};
/* Apalis SD1 */
- sdmmc3_clk_pa6 {
+ sdmmc3-clk-pa6 {
nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_cmd_pa7 {
+ sdmmc3-cmd-pa7 {
nvidia,pins = "sdmmc3_cmd_pa7";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat3_pb4 {
+ sdmmc3-dat3-pb4 {
nvidia,pins = "sdmmc3_dat3_pb4";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat2_pb5 {
+ sdmmc3-dat2-pb5 {
nvidia,pins = "sdmmc3_dat2_pb5";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat1_pb6 {
+ sdmmc3-dat1-pb6 {
nvidia,pins = "sdmmc3_dat1_pb6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat0_pb7 {
+ sdmmc3-dat0-pb7 {
nvidia,pins = "sdmmc3_dat0_pb7";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_cd_n_pv2 { /* CD# GPIO */
+ sdmmc3-cd-n-pv2 { /* CD# GPIO */
nvidia,pins = "sdmmc3_cd_n_pv2";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -488,14 +489,14 @@
};
/* Apalis SPDIF */
- spdif_out_pk5 {
+ spdif-out-pk5 {
nvidia,pins = "spdif_out_pk5";
nvidia,function = "spdif";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- spdif_in_pk6 {
+ spdif-in-pk6 {
nvidia,pins = "spdif_in_pk6";
nvidia,function = "spdif";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -504,28 +505,28 @@
};
/* Apalis SPI1 */
- ulpi_clk_py0 {
+ ulpi-clk-py0 {
nvidia,pins = "ulpi_clk_py0";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_dir_py1 {
+ ulpi-dir-py1 {
nvidia,pins = "ulpi_dir_py1";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- ulpi_nxt_py2 {
+ ulpi-nxt-py2 {
nvidia,pins = "ulpi_nxt_py2";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_stp_py3 {
+ ulpi-stp-py3 {
nvidia,pins = "ulpi_stp_py3";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -578,42 +579,42 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_txd_pu0 {
+ uart1-txd-pu0 {
nvidia,pins = "pu0";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart1_rxd_pu1 {
+ uart1-rxd-pu1 {
nvidia,pins = "pu1";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_cts_n_pu2 {
+ uart1-cts-n-pu2 {
nvidia,pins = "pu2";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_rts_n_pu3 {
+ uart1-rts-n-pu3 {
nvidia,pins = "pu3";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart3_cts_n_pa1 { /* DSR GPIO */
+ uart3-cts-n-pa1 { /* DSR GPIO */
nvidia,pins = "uart3_cts_n_pa1";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart3_rts_n_pc0 { /* DTR GPIO */
+ uart3-rts-n-pc0 { /* DTR GPIO */
nvidia,pins = "uart3_rts_n_pc0";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -622,28 +623,28 @@
};
/* Apalis UART2 */
- uart2_txd_pc2 {
+ uart2-txd-pc2 {
nvidia,pins = "uart2_txd_pc2";
nvidia,function = "irda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart2_rxd_pc3 {
+ uart2-rxd-pc3 {
nvidia,pins = "uart2_rxd_pc3";
nvidia,function = "irda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart2_cts_n_pj5 {
+ uart2-cts-n-pj5 {
nvidia,pins = "uart2_cts_n_pj5";
nvidia,function = "uartb";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart2_rts_n_pj6 {
+ uart2-rts-n-pj6 {
nvidia,pins = "uart2_rts_n_pj6";
nvidia,function = "uartb";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -652,14 +653,14 @@
};
/* Apalis UART3 */
- uart3_txd_pw6 {
+ uart3-txd-pw6 {
nvidia,pins = "uart3_txd_pw6";
nvidia,function = "uartc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart3_rxd_pw7 {
+ uart3-rxd-pw7 {
nvidia,pins = "uart3_rxd_pw7";
nvidia,function = "uartc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -668,14 +669,14 @@
};
/* Apalis UART4 */
- uart4_rxd_pb0 {
+ uart4-rxd-pb0 {
nvidia,pins = "pb0";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart4_txd_pj7 {
+ uart4-txd-pj7 {
nvidia,pins = "pj7";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -684,7 +685,7 @@
};
/* Apalis USBH_EN */
- gen2_i2c_sda_pt6 {
+ gen2-i2c-sda-pt6 {
nvidia,pins = "gen2_i2c_sda_pt6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -703,7 +704,7 @@
};
/* Apalis USBO1_EN */
- gen2_i2c_scl_pt5 {
+ gen2-i2c-scl-pt5 {
nvidia,pins = "gen2_i2c_scl_pt5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -722,7 +723,7 @@
};
/* Apalis WAKE1_MICO */
- pex_wake_n_pdd3 {
+ pex-wake-n-pdd3 {
nvidia,pins = "pex_wake_n_pdd3";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -731,7 +732,7 @@
};
/* CORE_PWR_REQ */
- core_pwr_req {
+ core-pwr-req {
nvidia,pins = "core_pwr_req";
nvidia,function = "pwron";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -740,7 +741,7 @@
};
/* CPU_PWR_REQ */
- cpu_pwr_req {
+ cpu-pwr-req {
nvidia,pins = "cpu_pwr_req";
nvidia,function = "cpu";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -749,14 +750,14 @@
};
/* DVFS */
- dvfs_pwm_px0 {
+ dvfs-pwm-px0 {
nvidia,pins = "dvfs_pwm_px0";
nvidia,function = "cldvfs";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dvfs_clk_px2 {
+ dvfs-clk-px2 {
nvidia,pins = "dvfs_clk_px2";
nvidia,function = "cldvfs";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -765,70 +766,70 @@
};
/* eMMC */
- sdmmc4_dat0_paa0 {
+ sdmmc4-dat0-paa0 {
nvidia,pins = "sdmmc4_dat0_paa0";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat1_paa1 {
+ sdmmc4-dat1-paa1 {
nvidia,pins = "sdmmc4_dat1_paa1";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat2_paa2 {
+ sdmmc4-dat2-paa2 {
nvidia,pins = "sdmmc4_dat2_paa2";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat3_paa3 {
+ sdmmc4-dat3-paa3 {
nvidia,pins = "sdmmc4_dat3_paa3";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat4_paa4 {
+ sdmmc4-dat4-paa4 {
nvidia,pins = "sdmmc4_dat4_paa4";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat5_paa5 {
+ sdmmc4-dat5-paa5 {
nvidia,pins = "sdmmc4_dat5_paa5";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat6_paa6 {
+ sdmmc4-dat6-paa6 {
nvidia,pins = "sdmmc4_dat6_paa6";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat7_paa7 {
+ sdmmc4-dat7-paa7 {
nvidia,pins = "sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_clk_pcc4 {
+ sdmmc4-clk-pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_cmd_pt7 {
+ sdmmc4-cmd-pt7 {
nvidia,pins = "sdmmc4_cmd_pt7";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -837,7 +838,7 @@
};
/* JTAG_RTCK */
- jtag_rtck {
+ jtag-rtck {
nvidia,pins = "jtag_rtck";
nvidia,function = "rtck";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -846,7 +847,7 @@
};
/* LAN_DEV_OFF# */
- ulpi_data5_po6 {
+ ulpi-data5-po6 {
nvidia,pins = "ulpi_data5_po6";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -855,7 +856,7 @@
};
/* LAN_RESET# */
- kb_row10_ps2 {
+ kb-row10-ps2 {
nvidia,pins = "kb_row10_ps2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -864,7 +865,7 @@
};
/* LAN_WAKE# */
- ulpi_data4_po5 {
+ ulpi-data4-po5 {
nvidia,pins = "ulpi_data4_po5";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -918,35 +919,35 @@
};
/* MCU SPI */
- gpio_x4_aud_px4 {
+ gpio-x4-aud-px4 {
nvidia,pins = "gpio_x4_aud_px4";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x5_aud_px5 {
+ gpio-x5-aud-px5 {
nvidia,pins = "gpio_x5_aud_px5";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x6_aud_px6 { /* MCU_CS */
+ gpio-x6-aud-px6 { /* MCU_CS */
nvidia,pins = "gpio_x6_aud_px6";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x7_aud_px7 {
+ gpio-x7-aud-px7 {
nvidia,pins = "gpio_x7_aud_px7";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- gpio_w2_aud_pw2 { /* MCU_CSEZP */
+ gpio-w2-aud-pw2 { /* MCU_CSEZP */
nvidia,pins = "gpio_w2_aud_pw2";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -955,7 +956,7 @@
};
/* PMIC_CLK_32K */
- clk_32k_in {
+ clk-32k-in {
nvidia,pins = "clk_32k_in";
nvidia,function = "clk";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -964,7 +965,7 @@
};
/* PMIC_CPU_OC_INT */
- clk_32k_out_pa0 {
+ clk-32k-out-pa0 {
nvidia,pins = "clk_32k_out_pa0";
nvidia,function = "soc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -973,7 +974,7 @@
};
/* PWR_I2C */
- pwr_i2c_scl_pz6 {
+ pwr-i2c-scl-pz6 {
nvidia,pins = "pwr_i2c_scl_pz6";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -981,7 +982,7 @@
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- pwr_i2c_sda_pz7 {
+ pwr-i2c-sda-pz7 {
nvidia,pins = "pwr_i2c_sda_pz7";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -991,7 +992,7 @@
};
/* PWR_INT_N */
- pwr_int_n {
+ pwr-int-n {
nvidia,pins = "pwr_int_n";
nvidia,function = "pmi";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -1009,7 +1010,7 @@
};
/* RESET_OUT_N */
- reset_out_n {
+ reset-out-n {
nvidia,pins = "reset_out_n";
nvidia,function = "reset_out_n";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1018,14 +1019,14 @@
};
/* SHIFT_CTRL_DIR_IN */
- kb_row0_pr0 {
+ kb-row0-pr0 {
nvidia,pins = "kb_row0_pr0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row1_pr1 {
+ kb-row1-pr1 {
nvidia,pins = "kb_row1_pr1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1034,7 +1035,7 @@
};
/* Configure level-shifter as output for HDA */
- kb_row11_ps3 {
+ kb-row11-ps3 {
nvidia,pins = "kb_row11_ps3";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -1043,21 +1044,21 @@
};
/* SHIFT_CTRL_DIR_OUT */
- kb_col5_pq5 {
+ kb-col5-pq5 {
nvidia,pins = "kb_col5_pq5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col6_pq6 {
+ kb-col6-pq6 {
nvidia,pins = "kb_col6_pq6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col7_pq7 {
+ kb-col7-pq7 {
nvidia,pins = "kb_col7_pq7";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -1066,35 +1067,35 @@
};
/* SHIFT_CTRL_OE */
- kb_col0_pq0 {
+ kb-col0-pq0 {
nvidia,pins = "kb_col0_pq0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col1_pq1 {
+ kb-col1-pq1 {
nvidia,pins = "kb_col1_pq1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col2_pq2 {
+ kb-col2-pq2 {
nvidia,pins = "kb_col2_pq2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col4_pq4 {
+ kb-col4-pq4 {
nvidia,pins = "kb_col4_pq4";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row2_pr2 {
+ kb-row2-pr2 {
nvidia,pins = "kb_row2_pr2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1112,7 +1113,7 @@
};
/* TOUCH_INT */
- gpio_w3_aud_pw3 {
+ gpio-w3-aud-pw3 {
nvidia,pins = "gpio_w3_aud_pw3";
nvidia,function = "spi6";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1253,189 +1254,189 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_fs_pn0 { /* NC */
+ dap1-fs-pn0 { /* NC */
nvidia,pins = "dap1_fs_pn0";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_din_pn1 { /* NC */
+ dap1-din-pn1 { /* NC */
nvidia,pins = "dap1_din_pn1";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_sclk_pn3 { /* NC */
+ dap1-sclk-pn3 { /* NC */
nvidia,pins = "dap1_sclk_pn3";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data7_po0 { /* NC */
+ ulpi-data7-po0 { /* NC */
nvidia,pins = "ulpi_data7_po0";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data0_po1 { /* NC */
+ ulpi-data0-po1 { /* NC */
nvidia,pins = "ulpi_data0_po1";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data1_po2 { /* NC */
+ ulpi-data1-po2 { /* NC */
nvidia,pins = "ulpi_data1_po2";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data2_po3 { /* NC */
+ ulpi-data2-po3 { /* NC */
nvidia,pins = "ulpi_data2_po3";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data3_po4 { /* NC */
+ ulpi-data3-po4 { /* NC */
nvidia,pins = "ulpi_data3_po4";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data6_po7 { /* NC */
+ ulpi-data6-po7 { /* NC */
nvidia,pins = "ulpi_data6_po7";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_fs_pp4 { /* NC */
+ dap4-fs-pp4 { /* NC */
nvidia,pins = "dap4_fs_pp4";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_din_pp5 { /* NC */
+ dap4-din-pp5 { /* NC */
nvidia,pins = "dap4_din_pp5";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_dout_pp6 { /* NC */
+ dap4-dout-pp6 { /* NC */
nvidia,pins = "dap4_dout_pp6";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_sclk_pp7 { /* NC */
+ dap4-sclk-pp7 { /* NC */
nvidia,pins = "dap4_sclk_pp7";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col3_pq3 { /* NC */
+ kb-col3-pq3 { /* NC */
nvidia,pins = "kb_col3_pq3";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row3_pr3 { /* NC */
+ kb-row3-pr3 { /* NC */
nvidia,pins = "kb_row3_pr3";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row4_pr4 { /* NC */
+ kb-row4-pr4 { /* NC */
nvidia,pins = "kb_row4_pr4";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row5_pr5 { /* NC */
+ kb-row5-pr5 { /* NC */
nvidia,pins = "kb_row5_pr5";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row6_pr6 { /* NC */
+ kb-row6-pr6 { /* NC */
nvidia,pins = "kb_row6_pr6";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row7_pr7 { /* NC */
+ kb-row7-pr7 { /* NC */
nvidia,pins = "kb_row7_pr7";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row8_ps0 { /* NC */
+ kb-row8-ps0 { /* NC */
nvidia,pins = "kb_row8_ps0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row9_ps1 { /* NC */
+ kb-row9-ps1 { /* NC */
nvidia,pins = "kb_row9_ps1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row12_ps4 { /* NC */
+ kb-row12-ps4 { /* NC */
nvidia,pins = "kb_row12_ps4";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row13_ps5 { /* NC */
+ kb-row13-ps5 { /* NC */
nvidia,pins = "kb_row13_ps5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row14_ps6 { /* NC */
+ kb-row14-ps6 { /* NC */
nvidia,pins = "kb_row14_ps6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row15_ps7 { /* NC */
+ kb-row15-ps7 { /* NC */
nvidia,pins = "kb_row15_ps7";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row16_pt0 { /* NC */
+ kb-row16-pt0 { /* NC */
nvidia,pins = "kb_row16_pt0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row17_pt1 { /* NC */
+ kb-row17-pt1 { /* NC */
nvidia,pins = "kb_row17_pt1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1467,14 +1468,14 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x1_aud_px1 { /* NC */
+ gpio-x1-aud-px1 { /* NC */
nvidia,pins = "gpio_x1_aud_px1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x3_aud_px3 { /* NC */
+ gpio-x3-aud-px3 { /* NC */
nvidia,pins = "gpio_x3_aud_px3";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1502,14 +1503,14 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- clk3_req_pee1 { /* NC */
+ clk3-req-pee1 { /* NC */
nvidia,pins = "clk3_req_pee1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap_mclk1_req_pee2 { /* NC */
+ dap-mclk1-req-pee2 { /* NC */
nvidia,pins = "dap_mclk1_req_pee2";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1525,7 +1526,7 @@
* SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
* bits being set to 0xfffd according to the TRM!
*/
- sdmmc3_clk_lb_out_pee4 { /* NC */
+ sdmmc3-clk-lb-out-pee4 { /* NC */
nvidia,pins = "sdmmc3_clk_lb_out_pee4";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1560,8 +1561,9 @@
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- VDDA-supply = <&reg_3v3>;
- VDDIO-supply = <&vddio_1v8>;
+ VDDA-supply = <&reg_module_3v3_audio>;
+ VDDD-supply = <&reg_1v8_vddio>;
+ VDDIO-supply = <&reg_1v8_vddio>;
clocks = <&tegra_car TEGRA124_CLK_EXTERN1>;
};
@@ -1578,14 +1580,14 @@
pinctrl-0 = <&as3722_default>;
as3722_default: pinmux {
- gpio2_7 {
+ gpio2-7 {
pins = "gpio2", /* PWR_EN_+V3.3 */
"gpio7"; /* +V1.6_LPO */
function = "gpio";
bias-pull-up;
};
- gpio0_1_3_4_5_6 {
+ gpio0-1-3-4-5-6 {
pins = "gpio0", "gpio1", "gpio3",
"gpio4", "gpio5", "gpio6";
bias-high-impedance;
@@ -1593,18 +1595,18 @@
};
regulators {
- vsup-sd2-supply = <&reg_3v3>;
- vsup-sd3-supply = <&reg_3v3>;
- vsup-sd4-supply = <&reg_3v3>;
- vsup-sd5-supply = <&reg_3v3>;
- vin-ldo0-supply = <&vddio_ddr_1v35>;
- vin-ldo1-6-supply = <&reg_3v3>;
- vin-ldo2-5-7-supply = <&vddio_1v8>;
- vin-ldo3-4-supply = <&reg_3v3>;
- vin-ldo9-10-supply = <&reg_3v3>;
- vin-ldo11-supply = <&reg_3v3>;
-
- vdd_cpu: sd0 {
+ vsup-sd2-supply = <&reg_module_3v3>;
+ vsup-sd3-supply = <&reg_module_3v3>;
+ vsup-sd4-supply = <&reg_module_3v3>;
+ vsup-sd5-supply = <&reg_module_3v3>;
+ vin-ldo0-supply = <&reg_1v35_vddio_ddr>;
+ vin-ldo1-6-supply = <&reg_module_3v3>;
+ vin-ldo2-5-7-supply = <&reg_1v8_vddio>;
+ vin-ldo3-4-supply = <&reg_module_3v3>;
+ vin-ldo9-10-supply = <&reg_module_3v3>;
+ vin-ldo11-supply = <&reg_module_3v3>;
+
+ reg_vdd_cpu: sd0 {
regulator-name = "+VDD_CPU_AP";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1400000>;
@@ -1626,7 +1628,7 @@
ams,ext-control = <1>;
};
- vddio_ddr_1v35: sd2 {
+ reg_1v35_vddio_ddr: sd2 {
regulator-name =
"+V1.35_VDDIO_DDR(sd2)";
regulator-min-microvolt = <1350000>;
@@ -1644,13 +1646,13 @@
regulator-boot-on;
};
- vdd_1v05: sd4 {
+ reg_1v05_vdd: sd4 {
regulator-name = "+V1.05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
- vddio_1v8: sd5 {
+ reg_1v8_vddio: sd5 {
regulator-name = "+V1.8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -1658,7 +1660,7 @@
regulator-always-on;
};
- vdd_gpu: sd6 {
+ reg_vdd_gpu: sd6 {
regulator-name = "+VDD_GPU_AP";
regulator-min-microvolt = <650000>;
regulator-max-microvolt = <1200000>;
@@ -1668,7 +1670,7 @@
regulator-always-on;
};
- avdd_1v05: ldo0 {
+ reg_1v05_avdd: ldo0 {
regulator-name = "+V1.05_AVDD";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
@@ -1743,12 +1745,13 @@
* TMP451 temperature sensor
* Note: THERM_N directly connected to AS3722 PMIC THERM
*/
- temperature-sensor@4c {
+ temp-sensor@4c {
compatible = "ti,tmp451";
reg = <0x4c>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
#thermal-sensor-cells = <1>;
+ vcc-supply = <&reg_module_3v3>;
};
};
@@ -1780,9 +1783,9 @@
sata@70020000 {
phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
phy-names = "sata-0";
- avdd-supply = <&vdd_1v05>;
- hvdd-supply = <&reg_3v3>;
- vddio-supply = <&vdd_1v05>;
+ avdd-supply = <&reg_1v05_vdd>;
+ hvdd-supply = <&reg_module_3v3>;
+ vddio-supply = <&reg_1v05_vdd>;
};
usb@70090000 {
@@ -1793,14 +1796,14 @@
<&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
<&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
- avddio-pex-supply = <&vdd_1v05>;
- avdd-pll-erefe-supply = <&avdd_1v05>;
- avdd-pll-utmip-supply = <&vddio_1v8>;
- avdd-usb-ss-pll-supply = <&vdd_1v05>;
- avdd-usb-supply = <&reg_3v3>;
- dvddio-pex-supply = <&vdd_1v05>;
- hvdd-usb-ss-pll-e-supply = <&reg_3v3>;
- hvdd-usb-ss-supply = <&reg_3v3>;
+ avddio-pex-supply = <&reg_1v05_vdd>;
+ avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+ avdd-pll-utmip-supply = <&reg_1v8_vddio>;
+ avdd-usb-ss-pll-supply = <&reg_1v05_vdd>;
+ avdd-usb-supply = <&reg_module_3v3>;
+ dvddio-pex-supply = <&reg_1v05_vdd>;
+ hvdd-usb-ss-pll-e-supply = <&reg_module_3v3>;
+ hvdd-usb-ss-supply = <&reg_module_3v3>;
};
padctl@7009f000 {
@@ -1810,18 +1813,18 @@
lanes {
usb2-0 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
usb2-1 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
usb2-2 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
};
};
@@ -1831,28 +1834,28 @@
lanes {
pcie-0 {
- nvidia,function = "usb3-ss";
status = "okay";
+ nvidia,function = "usb3-ss";
};
pcie-1 {
- nvidia,function = "usb3-ss";
status = "okay";
+ nvidia,function = "usb3-ss";
};
pcie-2 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
pcie-3 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
pcie-4 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
};
};
@@ -1862,8 +1865,8 @@
lanes {
sata-0 {
- nvidia,function = "sata";
status = "okay";
+ nvidia,function = "sata";
};
};
};
@@ -1874,7 +1877,6 @@
usb2-0 {
status = "okay";
mode = "otg";
-
vbus-supply = <&reg_usbo1_vbus>;
};
@@ -1882,7 +1884,6 @@
usb2-1 {
status = "okay";
mode = "host";
-
vbus-supply = <&reg_usbh_vbus>;
};
@@ -1890,18 +1891,19 @@
usb2-2 {
status = "okay";
mode = "host";
-
vbus-supply = <&reg_usbh_vbus>;
};
usb3-0 {
- nvidia,usb2-companion = <2>;
status = "okay";
+ nvidia,usb2-companion = <2>;
+ vbus-supply = <&reg_usbh_vbus>;
};
usb3-1 {
- nvidia,usb2-companion = <0>;
status = "okay";
+ nvidia,usb2-companion = <0>;
+ vbus-supply = <&reg_usbo1_vbus>;
};
};
};
@@ -1911,13 +1913,16 @@
status = "okay";
bus-width = <8>;
non-removable;
+ vmmc-supply = <&reg_module_3v3>; /* VCC */
+ vqmmc-supply = <&reg_1v8_vddio>; /* VCCQ */
+ mmc-ddr-1_8v;
};
/* CPU DFLL clock */
clock@70110000 {
status = "okay";
- vdd-cpu-supply = <&vdd_cpu>;
nvidia,i2c-fs-rate = <400000>;
+ vdd-cpu-supply = <&reg_vdd_cpu>;
};
ahub@70300000 {
@@ -1926,22 +1931,15 @@
};
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ clk32k_in: osc3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
};
cpus {
cpu@0 {
- vdd-cpu-supply = <&vdd_cpu>;
+ vdd-cpu-supply = <&reg_vdd_cpu>;
};
};
@@ -1951,7 +1949,7 @@
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
- vin-supply = <&vdd_1v05>;
+ vin-supply = <&reg_1v05_vdd>;
};
reg_3v3_mxm: regulator-3v3-mxm {
@@ -1963,7 +1961,15 @@
regulator-boot-on;
};
- reg_3v3: regulator-3v3 {
+ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&reg_1v05_vdd>;
+ };
+
+ reg_module_3v3: regulator-module-3v3 {
compatible = "regulator-fixed";
regulator-name = "+V3.3";
regulator-min-microvolt = <3300000>;
@@ -1976,12 +1982,12 @@
vin-supply = <&reg_3v3_mxm>;
};
- reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ reg_module_3v3_audio: regulator-module-3v3-audio {
compatible = "regulator-fixed";
- regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-name = "+V3.3_AUDIO_AVDD_S";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vin-supply = <&vdd_1v05>;
+ regulator-always-on;
};
sound {
@@ -2035,7 +2041,7 @@
&gpio {
/* I210 Gigabit Ethernet Controller Reset */
- lan_reset_n {
+ lan-reset-n {
gpio-hog;
gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
output-high;
@@ -2043,7 +2049,7 @@
};
/* Control MXM3 pin 26 Reset Module Output Carrier Input */
- reset_moci_ctrl {
+ reset-moci-ctrl {
gpio-hog;
gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 0f0d4a4988b9..13c93cd507d8 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -47,22 +47,19 @@
* Compatible for Revisions 2GB: V1.0A, V1.0B, V1.1A
*/
/ {
- model = "Toradex Apalis TK1";
- compatible = "toradex,apalis-tk1", "nvidia,tegra124";
-
memory@80000000 {
reg = <0x0 0x80000000 0x0 0x80000000>;
};
pcie@1003000 {
status = "okay";
- avddio-pex-supply = <&vdd_1v05>;
- avdd-pex-pll-supply = <&vdd_1v05>;
- avdd-pll-erefe-supply = <&avdd_1v05>;
- dvddio-pex-supply = <&vdd_1v05>;
- hvdd-pex-pll-e-supply = <&reg_3v3>;
- hvdd-pex-supply = <&reg_3v3>;
- vddio-pex-ctl-supply = <&reg_3v3>;
+ avddio-pex-supply = <&reg_1v05_vdd>;
+ avdd-pex-pll-supply = <&reg_1v05_vdd>;
+ avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+ dvddio-pex-supply = <&reg_1v05_vdd>;
+ hvdd-pex-pll-e-supply = <&reg_module_3v3>;
+ hvdd-pex-supply = <&reg_module_3v3>;
+ vddio-pex-ctl-supply = <&reg_module_3v3>;
/* Apalis PCIe (additional lane Apalis type specific) */
pci@1,0 {
@@ -77,16 +74,21 @@
phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
phy-names = "pcie-0";
status = "okay";
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
};
};
host1x@50000000 {
hdmi@54280000 {
- pll-supply = <&reg_1v05_avdd_hdmi_pll>;
- vdd-supply = <&reg_3v3_avdd_hdmi>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ pll-supply = <&reg_1v05_avdd_hdmi_pll>;
+ vdd-supply = <&reg_3v3_avdd_hdmi>;
};
};
@@ -95,44 +97,44 @@
* Node left disabled on purpose - the bootloader will enable
* it after having set the VPR up
*/
- vdd-supply = <&vdd_gpu>;
+ vdd-supply = <&reg_vdd_gpu>;
};
- pinmux: pinmux@70000868 {
+ pinmux@70000868 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
/* Analogue Audio (On-module) */
- dap3_fs_pp0 {
+ dap3-fs-pp0 {
nvidia,pins = "dap3_fs_pp0";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_din_pp1 {
+ dap3-din-pp1 {
nvidia,pins = "dap3_din_pp1";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap3_dout_pp2 {
+ dap3-dout-pp2 {
nvidia,pins = "dap3_dout_pp2";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_sclk_pp3 {
+ dap3-sclk-pp3 {
nvidia,pins = "dap3_sclk_pp3";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap_mclk1_pw4 {
+ dap-mclk1-pw4 {
nvidia,pins = "dap_mclk1_pw4";
nvidia,function = "extperiph1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -159,7 +161,7 @@
};
/* Apalis CAM1_MCLK */
- cam_mclk_pcc0 {
+ cam-mclk-pcc0 {
nvidia,pins = "cam_mclk_pcc0";
nvidia,function = "vi_alt3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -168,28 +170,28 @@
};
/* Apalis Digital Audio */
- dap2_fs_pa2 {
+ dap2-fs-pa2 {
nvidia,pins = "dap2_fs_pa2";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_sclk_pa3 {
+ dap2-sclk-pa3 {
nvidia,pins = "dap2_sclk_pa3";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_din_pa4 {
+ dap2-din-pa4 {
nvidia,pins = "dap2_din_pa4";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_dout_pa5 {
+ dap2-dout-pa5 {
nvidia,pins = "dap2_dout_pa5";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -202,7 +204,7 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- clk3_out_pee0 {
+ clk3-out-pee0 {
nvidia,pins = "clk3_out_pee0";
nvidia,function = "extperiph3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -211,49 +213,49 @@
};
/* Apalis GPIO */
- ddc_scl_pv4 {
+ ddc-scl-pv4 {
nvidia,pins = "ddc_scl_pv4";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- ddc_sda_pv5 {
+ ddc-sda-pv5 {
nvidia,pins = "ddc_sda_pv5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l0_rst_n_pdd1 {
+ pex-l0-rst-n-pdd1 {
nvidia,pins = "pex_l0_rst_n_pdd1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l0_clkreq_n_pdd2 {
+ pex-l0-clkreq-n-pdd2 {
nvidia,pins = "pex_l0_clkreq_n_pdd2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l1_rst_n_pdd5 {
+ pex-l1-rst-n-pdd5 {
nvidia,pins = "pex_l1_rst_n_pdd5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l1_clkreq_n_pdd6 {
+ pex-l1-clkreq-n-pdd6 {
nvidia,pins = "pex_l1_clkreq_n_pdd6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dp_hpd_pff0 {
+ dp-hpd-pff0 {
nvidia,pins = "dp_hpd_pff0";
nvidia,function = "dp";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -277,7 +279,7 @@
};
/* Apalis HDMI1_CEC */
- hdmi_cec_pee3 {
+ hdmi-cec-pee3 {
nvidia,pins = "hdmi_cec_pee3";
nvidia,function = "cec";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -287,7 +289,7 @@
};
/* Apalis HDMI1_HPD */
- hdmi_int_pn7 {
+ hdmi-int-pn7 {
nvidia,pins = "hdmi_int_pn7";
nvidia,function = "rsvd1";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -297,7 +299,7 @@
};
/* Apalis I2C1 */
- gen1_i2c_scl_pc4 {
+ gen1-i2c-scl-pc4 {
nvidia,pins = "gen1_i2c_scl_pc4";
nvidia,function = "i2c1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -305,7 +307,7 @@
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- gen1_i2c_sda_pc5 {
+ gen1-i2c-sda-pc5 {
nvidia,pins = "gen1_i2c_sda_pc5";
nvidia,function = "i2c1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -315,7 +317,7 @@
};
/* Apalis I2C2 (DDC) */
- gen2_i2c_scl_pt5 {
+ gen2-i2c-scl-pt5 {
nvidia,pins = "gen2_i2c_scl_pt5";
nvidia,function = "i2c2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -323,7 +325,7 @@
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- gen2_i2c_sda_pt6 {
+ gen2-i2c-sda-pt6 {
nvidia,pins = "gen2_i2c_sda_pt6";
nvidia,function = "i2c2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -333,7 +335,7 @@
};
/* Apalis I2C3 (CAM) */
- cam_i2c_scl_pbb1 {
+ cam-i2c-scl-pbb1 {
nvidia,pins = "cam_i2c_scl_pbb1";
nvidia,function = "i2c3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -341,7 +343,7 @@
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- cam_i2c_sda_pbb2 {
+ cam-i2c-sda-pbb2 {
nvidia,pins = "cam_i2c_sda_pbb2";
nvidia,function = "i2c3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -351,77 +353,77 @@
};
/* Apalis MMC1 */
- sdmmc1_cd_n_pv3 { /* CD# GPIO */
+ sdmmc1-cd-n-pv3 { /* CD# GPIO */
nvidia,pins = "sdmmc1_wp_n_pv3";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- clk2_out_pw5 { /* D5 GPIO */
+ clk2-out-pw5 { /* D5 GPIO */
nvidia,pins = "clk2_out_pw5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat3_py4 {
+ sdmmc1-dat3-py4 {
nvidia,pins = "sdmmc1_dat3_py4";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat2_py5 {
+ sdmmc1-dat2-py5 {
nvidia,pins = "sdmmc1_dat2_py5";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat1_py6 {
+ sdmmc1-dat1-py6 {
nvidia,pins = "sdmmc1_dat1_py6";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat0_py7 {
+ sdmmc1-dat0-py7 {
nvidia,pins = "sdmmc1_dat0_py7";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_clk_pz0 {
+ sdmmc1-clk-pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_cmd_pz1 {
+ sdmmc1-cmd-pz1 {
nvidia,pins = "sdmmc1_cmd_pz1";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- clk2_req_pcc5 { /* D4 GPIO */
+ clk2-req-pcc5 { /* D4 GPIO */
nvidia,pins = "clk2_req_pcc5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */
+ sdmmc3-clk-lb-in-pee5 { /* D6 GPIO */
nvidia,pins = "sdmmc3_clk_lb_in_pee5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- usb_vbus_en2_pff1 { /* D7 GPIO */
+ usb-vbus-en2-pff1 { /* D7 GPIO */
nvidia,pins = "usb_vbus_en2_pff1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -461,7 +463,7 @@
};
/* Apalis SATA1_ACT# */
- dap1_dout_pn2 {
+ dap1-dout-pn2 {
nvidia,pins = "dap1_dout_pn2";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -470,49 +472,49 @@
};
/* Apalis SD1 */
- sdmmc3_clk_pa6 {
+ sdmmc3-clk-pa6 {
nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_cmd_pa7 {
+ sdmmc3-cmd-pa7 {
nvidia,pins = "sdmmc3_cmd_pa7";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat3_pb4 {
+ sdmmc3-dat3-pb4 {
nvidia,pins = "sdmmc3_dat3_pb4";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat2_pb5 {
+ sdmmc3-dat2-pb5 {
nvidia,pins = "sdmmc3_dat2_pb5";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat1_pb6 {
+ sdmmc3-dat1-pb6 {
nvidia,pins = "sdmmc3_dat1_pb6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat0_pb7 {
+ sdmmc3-dat0-pb7 {
nvidia,pins = "sdmmc3_dat0_pb7";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_cd_n_pv2 { /* CD# GPIO */
+ sdmmc3-cd-n-pv2 { /* CD# GPIO */
nvidia,pins = "sdmmc3_cd_n_pv2";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -521,14 +523,14 @@
};
/* Apalis SPDIF */
- spdif_out_pk5 {
+ spdif-out-pk5 {
nvidia,pins = "spdif_out_pk5";
nvidia,function = "spdif";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- spdif_in_pk6 {
+ spdif-in-pk6 {
nvidia,pins = "spdif_in_pk6";
nvidia,function = "spdif";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -537,28 +539,28 @@
};
/* Apalis SPI1 */
- ulpi_clk_py0 {
+ ulpi-clk-py0 {
nvidia,pins = "ulpi_clk_py0";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_dir_py1 {
+ ulpi-dir-py1 {
nvidia,pins = "ulpi_dir_py1";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- ulpi_nxt_py2 {
+ ulpi-nxt-py2 {
nvidia,pins = "ulpi_nxt_py2";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_stp_py3 {
+ ulpi-stp-py3 {
nvidia,pins = "ulpi_stp_py3";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -611,42 +613,42 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_txd_pu0 {
+ uart1-txd-pu0 {
nvidia,pins = "pu0";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart1_rxd_pu1 {
+ uart1-rxd-pu1 {
nvidia,pins = "pu1";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_cts_n_pu2 {
+ uart1-cts-n-pu2 {
nvidia,pins = "pu2";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_rts_n_pu3 {
+ uart1-rts-n-pu3 {
nvidia,pins = "pu3";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart3_cts_n_pa1 { /* DSR GPIO */
+ uart3-cts-n-pa1 { /* DSR GPIO */
nvidia,pins = "uart3_cts_n_pa1";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart3_rts_n_pc0 { /* DTR GPIO */
+ uart3-rts-n-pc0 { /* DTR GPIO */
nvidia,pins = "uart3_rts_n_pc0";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -655,28 +657,28 @@
};
/* Apalis UART2 */
- uart2_txd_pc2 {
+ uart2-txd-pc2 {
nvidia,pins = "uart2_txd_pc2";
nvidia,function = "irda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart2_rxd_pc3 {
+ uart2-rxd-pc3 {
nvidia,pins = "uart2_rxd_pc3";
nvidia,function = "irda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart2_cts_n_pj5 {
+ uart2-cts-n-pj5 {
nvidia,pins = "uart2_cts_n_pj5";
nvidia,function = "uartb";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart2_rts_n_pj6 {
+ uart2-rts-n-pj6 {
nvidia,pins = "uart2_rts_n_pj6";
nvidia,function = "uartb";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -685,14 +687,14 @@
};
/* Apalis UART3 */
- uart3_txd_pw6 {
+ uart3-txd-pw6 {
nvidia,pins = "uart3_txd_pw6";
nvidia,function = "uartc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart3_rxd_pw7 {
+ uart3-rxd-pw7 {
nvidia,pins = "uart3_rxd_pw7";
nvidia,function = "uartc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -701,14 +703,14 @@
};
/* Apalis UART4 */
- uart4_rxd_pb0 {
+ uart4-rxd-pb0 {
nvidia,pins = "pb0";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart4_txd_pj7 {
+ uart4-txd-pj7 {
nvidia,pins = "pj7";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -717,7 +719,7 @@
};
/* Apalis USBH_EN */
- usb_vbus_en1_pn5 {
+ usb-vbus-en1-pn5 {
nvidia,pins = "usb_vbus_en1_pn5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -736,7 +738,7 @@
};
/* Apalis USBO1_EN */
- usb_vbus_en0_pn4 {
+ usb-vbus-en0-pn4 {
nvidia,pins = "usb_vbus_en0_pn4";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -755,7 +757,7 @@
};
/* Apalis WAKE1_MICO */
- pex_wake_n_pdd3 {
+ pex-wake-n-pdd3 {
nvidia,pins = "pex_wake_n_pdd3";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -764,7 +766,7 @@
};
/* CORE_PWR_REQ */
- core_pwr_req {
+ core-pwr-req {
nvidia,pins = "core_pwr_req";
nvidia,function = "pwron";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -773,7 +775,7 @@
};
/* CPU_PWR_REQ */
- cpu_pwr_req {
+ cpu-pwr-req {
nvidia,pins = "cpu_pwr_req";
nvidia,function = "cpu";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -782,14 +784,14 @@
};
/* DVFS */
- dvfs_pwm_px0 {
+ dvfs-pwm-px0 {
nvidia,pins = "dvfs_pwm_px0";
nvidia,function = "cldvfs";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dvfs_clk_px2 {
+ dvfs-clk-px2 {
nvidia,pins = "dvfs_clk_px2";
nvidia,function = "cldvfs";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -798,70 +800,70 @@
};
/* eMMC */
- sdmmc4_dat0_paa0 {
+ sdmmc4-dat0-paa0 {
nvidia,pins = "sdmmc4_dat0_paa0";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat1_paa1 {
+ sdmmc4-dat1-paa1 {
nvidia,pins = "sdmmc4_dat1_paa1";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat2_paa2 {
+ sdmmc4-dat2-paa2 {
nvidia,pins = "sdmmc4_dat2_paa2";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat3_paa3 {
+ sdmmc4-dat3-paa3 {
nvidia,pins = "sdmmc4_dat3_paa3";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat4_paa4 {
+ sdmmc4-dat4-paa4 {
nvidia,pins = "sdmmc4_dat4_paa4";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat5_paa5 {
+ sdmmc4-dat5-paa5 {
nvidia,pins = "sdmmc4_dat5_paa5";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat6_paa6 {
+ sdmmc4-dat6-paa6 {
nvidia,pins = "sdmmc4_dat6_paa6";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat7_paa7 {
+ sdmmc4-dat7-paa7 {
nvidia,pins = "sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_clk_pcc4 {
+ sdmmc4-clk-pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_cmd_pt7 {
+ sdmmc4-cmd-pt7 {
nvidia,pins = "sdmmc4_cmd_pt7";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -870,7 +872,7 @@
};
/* JTAG_RTCK */
- jtag_rtck {
+ jtag-rtck {
nvidia,pins = "jtag_rtck";
nvidia,function = "rtck";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -879,7 +881,7 @@
};
/* LAN_DEV_OFF# */
- ulpi_data5_po6 {
+ ulpi-data5-po6 {
nvidia,pins = "ulpi_data5_po6";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -888,7 +890,7 @@
};
/* LAN_RESET# */
- kb_row10_ps2 {
+ kb-row10-ps2 {
nvidia,pins = "kb_row10_ps2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -897,7 +899,7 @@
};
/* LAN_WAKE# */
- ulpi_data4_po5 {
+ ulpi-data4-po5 {
nvidia,pins = "ulpi_data4_po5";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -951,35 +953,35 @@
};
/* MCU SPI */
- gpio_x4_aud_px4 {
+ gpio-x4-aud-px4 {
nvidia,pins = "gpio_x4_aud_px4";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x5_aud_px5 {
+ gpio-x5-aud-px5 {
nvidia,pins = "gpio_x5_aud_px5";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x6_aud_px6 { /* MCU_CS */
+ gpio-x6-aud-px6 { /* MCU_CS */
nvidia,pins = "gpio_x6_aud_px6";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x7_aud_px7 {
+ gpio-x7-aud-px7 {
nvidia,pins = "gpio_x7_aud_px7";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- gpio_w2_aud_pw2 { /* MCU_CSEZP */
+ gpio-w2-aud-pw2 { /* MCU_CSEZP */
nvidia,pins = "gpio_w2_aud_pw2";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -988,7 +990,7 @@
};
/* PMIC_CLK_32K */
- clk_32k_in {
+ clk-32k-in {
nvidia,pins = "clk_32k_in";
nvidia,function = "clk";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -997,7 +999,7 @@
};
/* PMIC_CPU_OC_INT */
- clk_32k_out_pa0 {
+ clk-32k-out-pa0 {
nvidia,pins = "clk_32k_out_pa0";
nvidia,function = "soc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1006,7 +1008,7 @@
};
/* PWR_I2C */
- pwr_i2c_scl_pz6 {
+ pwr-i2c-scl-pz6 {
nvidia,pins = "pwr_i2c_scl_pz6";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1014,7 +1016,7 @@
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- pwr_i2c_sda_pz7 {
+ pwr-i2c-sda-pz7 {
nvidia,pins = "pwr_i2c_sda_pz7";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1024,7 +1026,7 @@
};
/* PWR_INT_N */
- pwr_int_n {
+ pwr-int-n {
nvidia,pins = "pwr_int_n";
nvidia,function = "pmi";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -1042,7 +1044,7 @@
};
/* RESET_OUT_N */
- reset_out_n {
+ reset-out-n {
nvidia,pins = "reset_out_n";
nvidia,function = "reset_out_n";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1051,14 +1053,14 @@
};
/* SHIFT_CTRL_DIR_IN */
- kb_row0_pr0 {
+ kb-row0-pr0 {
nvidia,pins = "kb_row0_pr0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row1_pr1 {
+ kb-row1-pr1 {
nvidia,pins = "kb_row1_pr1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1067,7 +1069,7 @@
};
/* Configure level-shifter as output for HDA */
- kb_row11_ps3 {
+ kb-row11-ps3 {
nvidia,pins = "kb_row11_ps3";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -1076,21 +1078,21 @@
};
/* SHIFT_CTRL_DIR_OUT */
- kb_col5_pq5 {
+ kb-col5-pq5 {
nvidia,pins = "kb_col5_pq5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col6_pq6 {
+ kb-col6-pq6 {
nvidia,pins = "kb_col6_pq6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col7_pq7 {
+ kb-col7-pq7 {
nvidia,pins = "kb_col7_pq7";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -1099,35 +1101,35 @@
};
/* SHIFT_CTRL_OE */
- kb_col0_pq0 {
+ kb-col0-pq0 {
nvidia,pins = "kb_col0_pq0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col1_pq1 {
+ kb-col1-pq1 {
nvidia,pins = "kb_col1_pq1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col2_pq2 {
+ kb-col2-pq2 {
nvidia,pins = "kb_col2_pq2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col4_pq4 {
+ kb-col4-pq4 {
nvidia,pins = "kb_col4_pq4";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row2_pr2 {
+ kb-row2-pr2 {
nvidia,pins = "kb_row2_pr2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1145,7 +1147,7 @@
};
/* TOUCH_INT */
- gpio_w3_aud_pw3 {
+ gpio-w3-aud-pw3 {
nvidia,pins = "gpio_w3_aud_pw3";
nvidia,function = "spi6";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1286,189 +1288,189 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_fs_pn0 { /* NC */
+ dap1-fs-pn0 { /* NC */
nvidia,pins = "dap1_fs_pn0";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_din_pn1 { /* NC */
+ dap1-din-pn1 { /* NC */
nvidia,pins = "dap1_din_pn1";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_sclk_pn3 { /* NC */
+ dap1-sclk-pn3 { /* NC */
nvidia,pins = "dap1_sclk_pn3";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data7_po0 { /* NC */
+ ulpi-data7-po0 { /* NC */
nvidia,pins = "ulpi_data7_po0";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data0_po1 { /* NC */
+ ulpi-data0-po1 { /* NC */
nvidia,pins = "ulpi_data0_po1";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data1_po2 { /* NC */
+ ulpi-data1-po2 { /* NC */
nvidia,pins = "ulpi_data1_po2";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data2_po3 { /* NC */
+ ulpi-data2-po3 { /* NC */
nvidia,pins = "ulpi_data2_po3";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data3_po4 { /* NC */
+ ulpi-data3-po4 { /* NC */
nvidia,pins = "ulpi_data3_po4";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data6_po7 { /* NC */
+ ulpi-data6-po7 { /* NC */
nvidia,pins = "ulpi_data6_po7";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_fs_pp4 { /* NC */
+ dap4-fs-pp4 { /* NC */
nvidia,pins = "dap4_fs_pp4";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_din_pp5 { /* NC */
+ dap4-din-pp5 { /* NC */
nvidia,pins = "dap4_din_pp5";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_dout_pp6 { /* NC */
+ dap4-dout-pp6 { /* NC */
nvidia,pins = "dap4_dout_pp6";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_sclk_pp7 { /* NC */
+ dap4-sclk-pp7 { /* NC */
nvidia,pins = "dap4_sclk_pp7";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col3_pq3 { /* NC */
+ kb-col3-pq3 { /* NC */
nvidia,pins = "kb_col3_pq3";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row3_pr3 { /* NC */
+ kb-row3-pr3 { /* NC */
nvidia,pins = "kb_row3_pr3";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row4_pr4 { /* NC */
+ kb-row4-pr4 { /* NC */
nvidia,pins = "kb_row4_pr4";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row5_pr5 { /* NC */
+ kb-row5-pr5 { /* NC */
nvidia,pins = "kb_row5_pr5";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row6_pr6 { /* NC */
+ kb-row6-pr6 { /* NC */
nvidia,pins = "kb_row6_pr6";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row7_pr7 { /* NC */
+ kb-row7-pr7 { /* NC */
nvidia,pins = "kb_row7_pr7";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row8_ps0 { /* NC */
+ kb-row8-ps0 { /* NC */
nvidia,pins = "kb_row8_ps0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row9_ps1 { /* NC */
+ kb-row9-ps1 { /* NC */
nvidia,pins = "kb_row9_ps1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row12_ps4 { /* NC */
+ kb-row12-ps4 { /* NC */
nvidia,pins = "kb_row12_ps4";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row13_ps5 { /* NC */
+ kb-row13-ps5 { /* NC */
nvidia,pins = "kb_row13_ps5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row14_ps6 { /* NC */
+ kb-row14-ps6 { /* NC */
nvidia,pins = "kb_row14_ps6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row15_ps7 { /* NC */
+ kb-row15-ps7 { /* NC */
nvidia,pins = "kb_row15_ps7";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row16_pt0 { /* NC */
+ kb-row16-pt0 { /* NC */
nvidia,pins = "kb_row16_pt0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row17_pt1 { /* NC */
+ kb-row17-pt1 { /* NC */
nvidia,pins = "kb_row17_pt1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1496,14 +1498,14 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x1_aud_px1 { /* NC */
+ gpio-x1-aud-px1 { /* NC */
nvidia,pins = "gpio_x1_aud_px1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x3_aud_px3 { /* NC */
+ gpio-x3-aud-px3 { /* NC */
nvidia,pins = "gpio_x3_aud_px3";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1531,14 +1533,14 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- clk3_req_pee1 { /* NC */
+ clk3-req-pee1 { /* NC */
nvidia,pins = "clk3_req_pee1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap_mclk1_req_pee2 { /* NC */
+ dap-mclk1-req-pee2 { /* NC */
nvidia,pins = "dap_mclk1_req_pee2";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1554,7 +1556,7 @@
* SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
* bits being set to 0xfffd according to the TRM!
*/
- sdmmc3_clk_lb_out_pee4 { /* NC */
+ sdmmc3-clk-lb-out-pee4 { /* NC */
nvidia,pins = "sdmmc3_clk_lb_out_pee4";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1589,8 +1591,9 @@
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- VDDA-supply = <&reg_3v3>;
- VDDIO-supply = <&vddio_1v8>;
+ VDDA-supply = <&reg_module_3v3_audio>;
+ VDDD-supply = <&reg_1v8_vddio>;
+ VDDIO-supply = <&reg_1v8_vddio>;
clocks = <&tegra_car TEGRA124_CLK_EXTERN1>;
};
@@ -1607,14 +1610,14 @@
pinctrl-0 = <&as3722_default>;
as3722_default: pinmux {
- gpio2_7 {
+ gpio2-7 {
pins = "gpio2", /* PWR_EN_+V3.3 */
"gpio7"; /* +V1.6_LPO */
function = "gpio";
bias-pull-up;
};
- gpio0_1_3_4_5_6 {
+ gpio0-1-3-4-5-6 {
pins = "gpio0", "gpio1", "gpio3",
"gpio4", "gpio5", "gpio6";
bias-high-impedance;
@@ -1622,18 +1625,18 @@
};
regulators {
- vsup-sd2-supply = <&reg_3v3>;
- vsup-sd3-supply = <&reg_3v3>;
- vsup-sd4-supply = <&reg_3v3>;
- vsup-sd5-supply = <&reg_3v3>;
- vin-ldo0-supply = <&vddio_ddr_1v35>;
- vin-ldo1-6-supply = <&reg_3v3>;
- vin-ldo2-5-7-supply = <&vddio_1v8>;
- vin-ldo3-4-supply = <&reg_3v3>;
- vin-ldo9-10-supply = <&reg_3v3>;
- vin-ldo11-supply = <&reg_3v3>;
-
- vdd_cpu: sd0 {
+ vsup-sd2-supply = <&reg_module_3v3>;
+ vsup-sd3-supply = <&reg_module_3v3>;
+ vsup-sd4-supply = <&reg_module_3v3>;
+ vsup-sd5-supply = <&reg_module_3v3>;
+ vin-ldo0-supply = <&reg_1v35_vddio_ddr>;
+ vin-ldo1-6-supply = <&reg_module_3v3>;
+ vin-ldo2-5-7-supply = <&reg_1v8_vddio>;
+ vin-ldo3-4-supply = <&reg_module_3v3>;
+ vin-ldo9-10-supply = <&reg_module_3v3>;
+ vin-ldo11-supply = <&reg_module_3v3>;
+
+ reg_vdd_cpu: sd0 {
regulator-name = "+VDD_CPU_AP";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1400000>;
@@ -1655,7 +1658,7 @@
ams,ext-control = <1>;
};
- vddio_ddr_1v35: sd2 {
+ reg_1v35_vddio_ddr: sd2 {
regulator-name =
"+V1.35_VDDIO_DDR(sd2)";
regulator-min-microvolt = <1350000>;
@@ -1673,13 +1676,13 @@
regulator-boot-on;
};
- vdd_1v05: sd4 {
+ reg_1v05_vdd: sd4 {
regulator-name = "+V1.05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
- vddio_1v8: sd5 {
+ reg_1v8_vddio: sd5 {
regulator-name = "+V1.8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -1687,7 +1690,7 @@
regulator-always-on;
};
- vdd_gpu: sd6 {
+ reg_vdd_gpu: sd6 {
regulator-name = "+VDD_GPU_AP";
regulator-min-microvolt = <650000>;
regulator-max-microvolt = <1200000>;
@@ -1697,7 +1700,7 @@
regulator-always-on;
};
- avdd_1v05: ldo0 {
+ reg_1v05_avdd: ldo0 {
regulator-name = "+V1.05_AVDD";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
@@ -1772,12 +1775,13 @@
* TMP451 temperature sensor
* Note: THERM_N directly connected to AS3722 PMIC THERM
*/
- temperature-sensor@4c {
+ temp-sensor@4c {
compatible = "ti,tmp451";
reg = <0x4c>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
#thermal-sensor-cells = <1>;
+ vcc-supply = <&reg_module_3v3>;
};
};
@@ -1809,9 +1813,9 @@
sata@70020000 {
phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
phy-names = "sata-0";
- avdd-supply = <&vdd_1v05>;
- hvdd-supply = <&reg_3v3>;
- vddio-supply = <&vdd_1v05>;
+ avdd-supply = <&reg_1v05_vdd>;
+ hvdd-supply = <&reg_module_3v3>;
+ vddio-supply = <&reg_1v05_vdd>;
};
usb@70090000 {
@@ -1822,14 +1826,14 @@
<&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
<&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
- avddio-pex-supply = <&vdd_1v05>;
- avdd-pll-erefe-supply = <&avdd_1v05>;
- avdd-pll-utmip-supply = <&vddio_1v8>;
- avdd-usb-ss-pll-supply = <&vdd_1v05>;
- avdd-usb-supply = <&reg_3v3>;
- dvddio-pex-supply = <&vdd_1v05>;
- hvdd-usb-ss-pll-e-supply = <&reg_3v3>;
- hvdd-usb-ss-supply = <&reg_3v3>;
+ avddio-pex-supply = <&reg_1v05_vdd>;
+ avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+ avdd-pll-utmip-supply = <&reg_1v8_vddio>;
+ avdd-usb-ss-pll-supply = <&reg_1v05_vdd>;
+ avdd-usb-supply = <&reg_module_3v3>;
+ dvddio-pex-supply = <&reg_1v05_vdd>;
+ hvdd-usb-ss-pll-e-supply = <&reg_module_3v3>;
+ hvdd-usb-ss-supply = <&reg_module_3v3>;
};
padctl@7009f000 {
@@ -1839,18 +1843,18 @@
lanes {
usb2-0 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
usb2-1 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
usb2-2 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
};
};
@@ -1860,28 +1864,28 @@
lanes {
pcie-0 {
- nvidia,function = "usb3-ss";
status = "okay";
+ nvidia,function = "usb3-ss";
};
pcie-1 {
- nvidia,function = "usb3-ss";
status = "okay";
+ nvidia,function = "usb3-ss";
};
pcie-2 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
pcie-3 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
pcie-4 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
};
};
@@ -1891,8 +1895,8 @@
lanes {
sata-0 {
- nvidia,function = "sata";
status = "okay";
+ nvidia,function = "sata";
};
};
};
@@ -1903,7 +1907,6 @@
usb2-0 {
status = "okay";
mode = "otg";
-
vbus-supply = <&reg_usbo1_vbus>;
};
@@ -1911,7 +1914,6 @@
usb2-1 {
status = "okay";
mode = "host";
-
vbus-supply = <&reg_usbh_vbus>;
};
@@ -1919,18 +1921,19 @@
usb2-2 {
status = "okay";
mode = "host";
-
vbus-supply = <&reg_usbh_vbus>;
};
usb3-0 {
- nvidia,usb2-companion = <2>;
status = "okay";
+ nvidia,usb2-companion = <2>;
+ vbus-supply = <&reg_usbh_vbus>;
};
usb3-1 {
- nvidia,usb2-companion = <0>;
status = "okay";
+ nvidia,usb2-companion = <0>;
+ vbus-supply = <&reg_usbo1_vbus>;
};
};
};
@@ -1940,13 +1943,16 @@
status = "okay";
bus-width = <8>;
non-removable;
+ vmmc-supply = <&reg_module_3v3>; /* VCC */
+ vqmmc-supply = <&reg_1v8_vddio>; /* VCCQ */
+ mmc-ddr-1_8v;
};
/* CPU DFLL clock */
clock@70110000 {
status = "okay";
- vdd-cpu-supply = <&vdd_cpu>;
nvidia,i2c-fs-rate = <400000>;
+ vdd-cpu-supply = <&reg_vdd_cpu>;
};
ahub@70300000 {
@@ -1955,22 +1961,15 @@
};
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ clk32k_in: osc3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
};
cpus {
cpu@0 {
- vdd-cpu-supply = <&vdd_cpu>;
+ vdd-cpu-supply = <&reg_vdd_cpu>;
};
};
@@ -1980,7 +1979,7 @@
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
- vin-supply = <&vdd_1v05>;
+ vin-supply = <&reg_1v05_vdd>;
};
reg_3v3_mxm: regulator-3v3-mxm {
@@ -1992,7 +1991,15 @@
regulator-boot-on;
};
- reg_3v3: regulator-3v3 {
+ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&reg_1v05_vdd>;
+ };
+
+ reg_module_3v3: regulator-module-3v3 {
compatible = "regulator-fixed";
regulator-name = "+V3.3";
regulator-min-microvolt = <3300000>;
@@ -2005,12 +2012,12 @@
vin-supply = <&reg_3v3_mxm>;
};
- reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ reg_module_3v3_audio: regulator-module-3v3-audio {
compatible = "regulator-fixed";
- regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-name = "+V3.3_AUDIO_AVDD_S";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vin-supply = <&vdd_1v05>;
+ regulator-always-on;
};
sound {
@@ -2064,7 +2071,7 @@
&gpio {
/* I210 Gigabit Ethernet Controller Reset */
- lan_reset_n {
+ lan-reset-n {
gpio-hog;
gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
output-high;
@@ -2072,7 +2079,7 @@
};
/* Control MXM3 pin 26 Reset Module Output Carrier Input */
- reset_moci_ctrl {
+ reset-moci-ctrl {
gpio-hog;
gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
new file mode 100644
index 000000000000..3c0f2681fcde
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20-colibri.dtsi"
+
+/ {
+ model = "Toradex Colibri T20 on Colibri Evaluation Board";
+ compatible = "toradex,colibri_t20-eval-v3", "toradex,colibri_t20",
+ "nvidia,tegra20";
+
+ aliases {
+ rtc0 = "/i2c@7000c000/rtc@68";
+ rtc1 = "/i2c@7000d000/pmic@34";
+ rtc2 = "/rtc@7000e000";
+ serial0 = &uarta;
+ serial1 = &uartd;
+ serial2 = &uartb;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+ nvidia,panel = <&panel>;
+ };
+ };
+
+ hdmi@54280000 {
+ status = "okay";
+ hdmi-supply = <&reg_5v0>;
+ };
+ };
+
+ pinmux@70000014 {
+ state_default: pinmux {
+ bl-on {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ ddc {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ hotplug-detect {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ i2c {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ lcd {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ lm1 {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ mmc {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ mmccd {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ pwm-a-b {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ pwm-c-d {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ ssp {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ uart-a {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ uart-b {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ uart-c {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ usbh-pen {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ };
+ };
+
+ /* Colibri UART-A */
+ serial@70006000 {
+ status = "okay";
+ };
+
+ /* Colibri UART-C */
+ serial@70006040 {
+ status = "okay";
+ };
+
+ /* Colibri UART-B */
+ serial@70006300 {
+ status = "okay";
+ };
+
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ /*
+ * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+ * board)
+ */
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ };
+ };
+
+ /* GEN2_I2C: unused */
+
+ /* CAM_I2C (I2C3): unused */
+
+ /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+ i2c@7000c400 {
+ status = "okay";
+ };
+
+ /* EHCI instance 0: USB1_DP/N -> USBC_P/N */
+ usb@c5000000 {
+ status = "okay";
+ dr_mode = "otg";
+ };
+
+ usb-phy@c5000000 {
+ status = "okay";
+ vbus-supply = <&reg_usbc_vbus>;
+ };
+
+ /* EHCI instance 2: USB3_DP/N -> USBH_P/N */
+ usb@c5008000 {
+ status = "okay";
+ };
+
+ usb-phy@c5008000 {
+ status = "okay";
+ vbus-supply = <&reg_usbh_vbus>;
+ };
+
+ /* SPI4: Colibri SSP */
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+
+ can@0 {
+ compatible = "microchip,mcp2515";
+ reg = <0>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio>;
+ /* CAN_INT */
+ interrupts = <TEGRA_GPIO(A, 0) IRQ_TYPE_EDGE_FALLING>;
+ spi-max-frequency = <10000000>;
+ vdd-supply = <&reg_3v3>;
+ xceiver-supply = <&reg_5v0>;
+ };
+ };
+
+ /* SD/MMC */
+ sdhci@c8000600 {
+ status = "okay";
+ bus-width = <4>;
+ cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
+ no-1-8-v;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <255 128 64 32 16 8 4 0>;
+ default-brightness-level = <6>;
+ /* BL_ON */
+ enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+ power-supply = <&reg_3v3>;
+ pwms = <&pwm 0 5000000>; /* PWM<A> */
+ };
+
+ clk16m: osc3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ wakeup {
+ label = "SODIMM pin 45 wakeup";
+ gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu", "simple-panel";
+ backlight = <&backlight>;
+ power-supply = <&reg_3v3>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usbc_vbus: regulator-usbc-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB5";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&reg_5v0>;
+ };
+
+ /* USBH_PEN resp. USB_P_EN */
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB[1-4]";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ vin-supply = <&reg_5v0>;
+ };
+};
diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts
index 57f16c0e9917..d8004d68efa0 100644
--- a/arch/arm/boot/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts
@@ -1,15 +1,21 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "tegra20-colibri.dtsi"
/ {
- model = "Toradex Colibri T20 256/512 MB on Iris";
- compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
+ model = "Toradex Colibri T20 on Iris";
+ compatible = "toradex,colibri_t20-iris", "toradex,colibri_t20",
+ "nvidia,tegra20";
aliases {
+ rtc0 = "/i2c@7000c000/rtc@68";
+ rtc1 = "/i2c@7000d000/pmic@34";
+ rtc2 = "/rtc@7000e000";
serial0 = &uarta;
serial1 = &uartd;
+ serial2 = &uartb;
};
chosen {
@@ -17,90 +23,222 @@
};
host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+ nvidia,panel = <&panel>;
+ };
+ };
+
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <&reg_5v0>;
};
};
pinmux@70000014 {
state_default: pinmux {
- hdint {
+ bl-on {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ ddc {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ hotplug-detect {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ i2c {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ lcd {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ lm1 {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ mmc {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ mmccd {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ pwm-a-b {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ pwm-c-d {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ ssp {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- i2cddc {
+ uart-a {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- sdio4 {
+ uart-b {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- uarta {
+ uart-c {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- uartd {
+ usbh-pen {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
};
};
+ /* Colibri UART-A */
serial@70006000 {
status = "okay";
};
+ /* Colibri UART-C */
+ serial@70006040 {
+ status = "okay";
+ };
+
+ /* Colibri UART-B */
serial@70006300 {
status = "okay";
};
- i2c_ddc: i2c@7000c400 {
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ /*
+ * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+ * board)
+ */
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ };
+ };
+
+ /* GEN2_I2C: unused */
+
+ /* CAM_I2C (I2C3): unused */
+
+ /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+ i2c@7000c400 {
status = "okay";
};
+ /* EHCI instance 0: USB1_DP/N -> USBC_P/N */
usb@c5000000 {
status = "okay";
+ dr_mode = "otg";
};
usb-phy@c5000000 {
status = "okay";
+ vbus-supply = <&reg_usbc_vbus>;
};
+ /* EHCI instance 2: USB3_DP/N -> USBH_P/N */
usb@c5008000 {
status = "okay";
};
usb-phy@c5008000 {
status = "okay";
+ vbus-supply = <&reg_usbh_vbus>;
+ };
+
+ /* SPI4: Colibri SSP */
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
};
+ /* SD/MMC */
sdhci@c8000600 {
status = "okay";
bus-width = <4>;
- vmmc-supply = <&vcc_sd_reg>;
- vqmmc-supply = <&vcc_sd_reg>;
- };
-
- regulators {
- regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb_host_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- regulator-always-on;
- gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
- };
+ cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
+ no-1-8-v;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <255 128 64 32 16 8 4 0>;
+ default-brightness-level = <6>;
+ /* BL_ON */
+ enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+ power-supply = <&reg_3v3>;
+ pwms = <&pwm 0 5000000>; /* PWM<A> */
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
- vcc_sd_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
+ wakeup {
+ label = "SODIMM pin 45 wakeup";
+ gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
};
};
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu", "simple-panel";
+ backlight = <&backlight>;
+ power-supply = <&reg_3v3>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usbc_vbus: regulator-usbc-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&reg_5v0>;
+ };
+
+ /* USBH_PEN resp. USB_P_EN */
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ vin-supply = <&reg_5v0>;
+ };
};
diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi
index e7b9ab09908a..6162d193e12c 100644
--- a/arch/arm/boot/dts/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri.dtsi
@@ -1,15 +1,13 @@
// SPDX-License-Identifier: GPL-2.0
#include "tegra20.dtsi"
+/*
+ * Toradex Colibri T20 Module Device Tree
+ * Compatible for Revisions Colibri T20 256MB V1.1B, V1.2A;
+ * Colibri T20 256MB IT V1.2A; Colibri T20 512MB V1.1C, V1.2A;
+ * Colibri T20 512MB IT V1.2A
+ */
/ {
- model = "Toradex Colibri T20 256/512 MB";
- compatible = "toradex,colibri_t20-512", "nvidia,tegra20";
-
- aliases {
- rtc0 = "/i2c@7000d000/tps6586x@34";
- rtc1 = "/rtc@7000e000";
- };
-
memory@0 {
/*
* Set memory to 256 MB to be safe as this could be used on
@@ -21,12 +19,11 @@
host1x@50000000 {
hdmi@54280000 {
- vdd-supply = <&hdmi_vdd_reg>;
- pll-supply = <&hdmi_pll_reg>;
-
- nvidia,ddc-i2c-bus = <&i2c_ddc>;
- nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
- GPIO_ACTIVE_HIGH>;
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ pll-supply = <&reg_1v8_avdd_hdmi_pll>;
+ vdd-supply = <&reg_3v3_avdd_hdmi>;
};
};
@@ -35,187 +32,406 @@
pinctrl-0 = <&state_default>;
state_default: pinmux {
- audio_refclk {
+ /* Analogue Audio AC97 to WM9712 (On-module) */
+ audio-refclk {
nvidia,pins = "cdev1";
nvidia,function = "plla_out";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- crt {
- nvidia,pins = "crtp";
- nvidia,function = "crt";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- };
dap3 {
nvidia,pins = "dap3";
nvidia,function = "dap3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- displaya {
- nvidia,pins = "ld0", "ld1", "ld2", "ld3",
- "ld4", "ld5", "ld6", "ld7", "ld8",
- "ld9", "ld10", "ld11", "ld12", "ld13",
- "ld14", "ld15", "ld16", "ld17",
- "lhs", "lpw0", "lpw2", "lsc0",
- "lsc1", "lsck", "lsda", "lspi", "lvs";
- nvidia,function = "displaya";
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- };
- gpio_dte {
- nvidia,pins = "dte";
- nvidia,function = "rsvd1";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- };
- gpio_gmi {
- nvidia,pins = "ata", "atc", "atd", "ate",
- "dap1", "dap2", "dap4", "gpu", "irrx",
- "irtx", "spia", "spib", "spic";
- nvidia,function = "gmi";
+
+ /*
+ * AC97_RESET, ULPI_RESET, AC97_INT aka WM9712 GENIRQ
+ * (All on-module), SODIMM Pin 45 Wakeup
+ */
+ gpio-uac {
+ nvidia,pins = "uac";
+ nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- gpio_pta {
+
+ /*
+ * Buffer Enables for nPWE and RDnWR (On-module,
+ * see GPIO hogging further down below)
+ */
+ gpio-pta {
nvidia,pins = "pta";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- gpio_uac {
- nvidia,pins = "uac";
- nvidia,function = "rsvd2";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+
+ /*
+ * CLK_32K_OUT, CORE_PWR_REQ, CPU_PWR_REQ, PWR_INT_N,
+ * SYS_CLK_REQ (All on-module)
+ */
+ pmc {
+ nvidia,pins = "pmc";
+ nvidia,function = "pwr_on";
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- hdint {
- nvidia,pins = "hdint";
+
+ /*
+ * Colibri Address/Data Bus (GMI)
+ * Note: spid and spie optionally used for SPI1
+ */
+ gmi {
+ nvidia,pins = "atc", "atd", "ate", "dap1",
+ "dap2", "dap4", "gmd", "gpu",
+ "irrx", "irtx", "spia", "spib",
+ "spic", "spid", "spie", "uca",
+ "ucb";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ /* Further pins may be used as GPIOs */
+ gmi-gpio1 {
+ nvidia,pins = "lpw0", "lsc1", "lsck", "lsda";
nvidia,function = "hdmi";
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- i2c1 {
- nvidia,pins = "rm";
- nvidia,function = "i2c1";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ gmi-gpio2 {
+ nvidia,pins = "lcsn", "ldc", "lm0", "lsdi";
+ nvidia,function = "rsvd4";
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- i2c3 {
- nvidia,pins = "dtf";
- nvidia,function = "i2c3";
+
+ /* Colibri BL_ON */
+ bl-on {
+ nvidia,pins = "dta";
+ nvidia,function = "rsvd1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- i2cddc {
+
+ /* Colibri Backlight PWM<A>, PWM<B> */
+ pwm-a-b {
+ nvidia,pins = "sdc";
+ nvidia,function = "pwm";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri DDC */
+ ddc {
nvidia,pins = "ddc";
nvidia,function = "i2c2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- i2cp {
- nvidia,pins = "i2cp";
- nvidia,function = "i2cp";
+
+ /*
+ * Colibri EXT_IO*
+ * Note: dtf optionally used for I2C3
+ */
+ ext-io {
+ nvidia,pins = "dtf", "spdi";
+ nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- irda {
- nvidia,pins = "uad";
- nvidia,function = "irda";
+
+ /*
+ * Colibri Ethernet (On-module)
+ * ULPI EHCI instance 1 USB2_DP/N -> AX88772B
+ */
+ ulpi {
+ nvidia,pins = "uaa", "uab", "uda";
+ nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- nand {
- nvidia,pins = "kbca", "kbcc", "kbcd",
- "kbce", "kbcf";
- nvidia,function = "nand";
+ ulpi-refclk {
+ nvidia,pins = "cdev2";
+ nvidia,function = "pllp_out4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- owc {
- nvidia,pins = "owc";
- nvidia,function = "owr";
+
+ /* Colibri HOTPLUG_DETECT (HDMI) */
+ hotplug-detect {
+ nvidia,pins = "hdint";
+ nvidia,function = "hdmi";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri I2C */
+ i2c {
+ nvidia,pins = "rm";
+ nvidia,function = "i2c1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- pmc {
- nvidia,pins = "pmc";
- nvidia,function = "pwr_on";
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
+
+ /*
+ * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
+ * today's display need DE, disable LCD_M1
+ */
+ lm1 {
+ nvidia,pins = "lm1";
+ nvidia,function = "rsvd3";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- pwm {
- nvidia,pins = "sdb", "sdc", "sdd";
- nvidia,function = "pwm";
+
+ /* Colibri LCD (L_* resp. LDD<*>) */
+ lcd {
+ nvidia,pins = "ld0", "ld1", "ld2", "ld3",
+ "ld4", "ld5", "ld6", "ld7",
+ "ld8", "ld9", "ld10", "ld11",
+ "ld12", "ld13", "ld14", "ld15",
+ "ld16", "ld17", "lhs", "lsc0",
+ "lspi", "lvs";
+ nvidia,function = "displaya";
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- sdio4 {
- nvidia,pins = "atb", "gma", "gme";
+ /* Colibri LCD (Optional 24 BPP Support) */
+ lcd-24 {
+ nvidia,pins = "ldi", "lhp0", "lhp1", "lhp2",
+ "lpp", "lvp1";
+ nvidia,function = "displaya";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri MMC */
+ mmc {
+ nvidia,pins = "atb", "gma";
nvidia,function = "sdio4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- spi1 {
- nvidia,pins = "spid", "spie", "spif";
- nvidia,function = "spi1";
+
+ /* Colibri MMCCD */
+ mmccd {
+ nvidia,pins = "gmb";
+ nvidia,function = "gmi_int";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- spi4 {
+
+ /* Colibri MMC (Optional 8-bit) */
+ mmc-8bit {
+ nvidia,pins = "gme";
+ nvidia,function = "sdio4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /*
+ * Colibri Parallel Camera (Optional)
+ * pins multiplexed with others and therefore disabled
+ * Note: dta used for BL_ON by default
+ */
+ cif-mclk {
+ nvidia,pins = "csus";
+ nvidia,function = "vi_sensor_clk";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ cif {
+ nvidia,pins = "dtb", "dtc", "dtd";
+ nvidia,function = "vi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri PWM<C>, PWM<D> */
+ pwm-c-d {
+ nvidia,pins = "sdb", "sdd";
+ nvidia,function = "pwm";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri SSP */
+ ssp {
nvidia,pins = "slxa", "slxc", "slxd", "slxk";
nvidia,function = "spi4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- uarta {
+
+ /* Colibri UART-A */
+ uart-a {
nvidia,pins = "sdio1";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- uartd {
+ uart-a-dsr {
+ nvidia,pins = "lpw1";
+ nvidia,function = "rsvd3";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ uart-a-dcd {
+ nvidia,pins = "lpw2";
+ nvidia,function = "hdmi";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri UART-B */
+ uart-b {
nvidia,pins = "gmc";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- ulpi {
- nvidia,pins = "uaa", "uab", "uda";
- nvidia,function = "ulpi";
+
+ /* Colibri UART-C */
+ uart-c {
+ nvidia,pins = "uad";
+ nvidia,function = "irda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri USB_CDET */
+ usb-cdet {
+ nvidia,pins = "spdo";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri USBH_OC */
+ usbh-oc {
+ nvidia,pins = "spih";
+ nvidia,function = "spi2_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri USBH_PEN */
+ usbh-pen {
+ nvidia,pins = "spig";
+ nvidia,function = "spi2_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri VGA not supported */
+ vga {
+ nvidia,pins = "crtp";
+ nvidia,function = "crt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* I2C3 (Optional) */
+ i2c3 {
+ nvidia,pins = "dtf";
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* JTAG_RTCK */
+ jtag-rtck {
+ nvidia,pins = "gpu7";
+ nvidia,function = "rtck";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /*
+ * LAN_RESET, LAN_EXT_WAKEUP and LAN_PME
+ * (All On-module)
+ */
+ gpio-gpv {
+ nvidia,pins = "gpv";
+ nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- ulpi_refclk {
- nvidia,pins = "cdev2";
- nvidia,function = "pllp_out4";
+
+ /*
+ * LAN_V_BUS, VDD_FAULT, BATT_FAULT, WM9712 PENDOWN
+ * (All On-module); Colibri CAN_INT
+ */
+ gpio-dte {
+ nvidia,pins = "dte";
+ nvidia,function = "rsvd1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- usb_gpio {
- nvidia,pins = "spig", "spih";
- nvidia,function = "spi2_alt";
+
+ /* NAND (On-module) */
+ nand {
+ nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+ "kbce", "kbcf";
+ nvidia,function = "nand";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- vi {
- nvidia,pins = "dta", "dtb", "dtc", "dtd";
- nvidia,function = "vi";
+
+ /* Onewire (Optional) */
+ owr {
+ nvidia,pins = "owc";
+ nvidia,function = "owr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- vi_sc {
- nvidia,pins = "csus";
- nvidia,function = "vi_sensor_clk";
+
+ /* Power I2C (On-module) */
+ i2cp {
+ nvidia,pins = "i2cp";
+ nvidia,function = "i2cp";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* RESET_OUT */
+ reset-out {
+ nvidia,pins = "ata";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /*
+ * SPI1 (Optional)
+ * Note: spid and spie used for Colibri Address/Data
+ * Bus (GMI)
+ */
+ spi1 {
+ nvidia,pins = "spid", "spie", "spif";
+ nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
+
+ /*
+ * THERMD_ALERT# (On-module), unlatched I2C address pin
+ * of LM95245 temperature sensor therefore requires
+ * disabling for now
+ */
+ lvp0 {
+ nvidia,pins = "lvp0";
+ nvidia,function = "rsvd3";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
};
};
- ac97: ac97@70002000 {
+ tegra_ac97: ac97@70002000 {
status = "okay";
- nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
- GPIO_ACTIVE_HIGH>;
- nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0)
- GPIO_ACTIVE_HIGH>;
+ nvidia,codec-reset-gpio =
+ <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+ nvidia,codec-sync-gpio =
+ <&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+ };
+
+ serial@70006040 {
+ compatible = "nvidia,tegra20-hsuart";
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra20-hsuart";
};
nand-controller@70008000 {
@@ -243,7 +459,7 @@
};
/* DDC_SCL/SDA on X3 pin 15/16 (e.g. display EDID) */
- i2c_ddc: i2c@7000c400 {
+ hdmi_ddc: i2c@7000c400 {
clock-frequency = <10000>;
};
@@ -256,59 +472,45 @@
status = "okay";
clock-frequency = <100000>;
- pmic: tps6586x@34 {
+ pmic@34 {
compatible = "ti,tps6586x";
reg = <0x34>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
ti,system-power-controller;
-
#gpio-cells = <2>;
gpio-controller;
-
- sys-supply = <&vdd_3v3_reg>;
- vin-sm0-supply = <&sys_reg>;
- vin-sm1-supply = <&sys_reg>;
- vin-sm2-supply = <&sys_reg>;
- vinldo01-supply = <&sm2_reg>;
- vinldo23-supply = <&vdd_3v3_reg>;
- vinldo4-supply = <&vdd_3v3_reg>;
- vinldo678-supply = <&vdd_3v3_reg>;
- vinldo9-supply = <&vdd_3v3_reg>;
+ sys-supply = <&reg_module_3v3>;
+ vin-sm0-supply = <&reg_3v3_vsys>;
+ vin-sm1-supply = <&reg_3v3_vsys>;
+ vin-sm2-supply = <&reg_3v3_vsys>;
+ vinldo01-supply = <&reg_1v8_vdd_ddr2>;
+ vinldo23-supply = <&reg_module_3v3>;
+ vinldo4-supply = <&reg_module_3v3>;
+ vinldo678-supply = <&reg_module_3v3>;
+ vinldo9-supply = <&reg_module_3v3>;
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- sys_reg: regulator@0 {
- reg = <0>;
- regulator-compatible = "sys";
- regulator-name = "vdd_sys";
+ reg_3v3_vsys: sys {
+ regulator-name = "VSYS_3.3V";
regulator-always-on;
};
- regulator@1 {
- reg = <1>;
- regulator-compatible = "sm0";
- regulator-name = "vdd_sm0,vdd_core";
+ sm0 {
+ regulator-name = "VDD_CORE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- regulator@2 {
- reg = <2>;
- regulator-compatible = "sm1";
- regulator-name = "vdd_sm1,vdd_cpu";
+ sm1 {
+ regulator-name = "VDD_CPU_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
- sm2_reg: regulator@3 {
- reg = <3>;
- regulator-compatible = "sm2";
- regulator-name = "vdd_sm2,vin_ldo*";
+ reg_1v8_vdd_ddr2: sm2 {
+ regulator-name = "VDD_DDR2_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
@@ -316,80 +518,68 @@
/* LDO0 is not connected to anything */
- regulator@5 {
- reg = <5>;
- regulator-compatible = "ldo1";
- regulator-name = "vdd_ldo1,avdd_pll*";
+ /*
+ * +3.3V_ENABLE_N switching via FET:
+ * AVDD_AUDIO_S and +3.3V
+ * see also +3.3V fixed supply
+ */
+ ldo1 {
+ regulator-name = "AVDD_PLL_1.1V";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
- regulator@6 {
- reg = <6>;
- regulator-compatible = "ldo2";
- regulator-name = "vdd_ldo2,vdd_rtc";
+ ldo2 {
+ regulator-name = "VDD_RTC_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
/* LDO3 is not connected to anything */
- regulator@8 {
- reg = <8>;
- regulator-compatible = "ldo4";
- regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+ ldo4 {
+ regulator-name = "VDDIO_SYS_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- ldo5_reg: regulator@9 {
- reg = <9>;
- regulator-compatible = "ldo5";
- regulator-name = "vdd_ldo5,vdd_fuse";
+ /* Switched via FET from regular +3.3V */
+ ldo5 {
+ regulator-name = "+3.3V_USB";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- regulator@10 {
- reg = <10>;
- regulator-compatible = "ldo6";
- regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
+ ldo6 {
+ regulator-name = "AVDD_VDAC_2.85V";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
- hdmi_vdd_reg: regulator@11 {
- reg = <11>;
- regulator-compatible = "ldo7";
- regulator-name = "vdd_ldo7,avdd_hdmi";
+ reg_3v3_avdd_hdmi: ldo7 {
+ regulator-name = "AVDD_HDMI_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- hdmi_pll_reg: regulator@12 {
- reg = <12>;
- regulator-compatible = "ldo8";
- regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+ reg_1v8_avdd_hdmi_pll: ldo8 {
+ regulator-name = "AVDD_HDMI_PLL_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- regulator@13 {
- reg = <13>;
- regulator-compatible = "ldo9";
- regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+ ldo9 {
+ regulator-name = "VDDIO_RX_DDR_2.85V";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
- regulator@14 {
- reg = <14>;
- regulator-compatible = "ldo_rtc";
- regulator-name = "vdd_rtc_out,vdd_cell";
+ ldo_rtc {
+ regulator-name = "VCC_BATT";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
@@ -397,7 +587,8 @@
};
};
- temperature-sensor@4c {
+ /* LM95245 temperature sensor */
+ temp-sensor@4c {
compatible = "national,lm95245";
reg = <0x4c>;
};
@@ -410,6 +601,14 @@
nvidia,core-pwr-good-time = <3845 3845>;
nvidia,core-pwr-off-time = <3875>;
nvidia,sys-clock-req-active-high;
+
+ /* Set SLEEP MODE bit in SUPPLYENE register of TPS658643 PMIC */
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <3>;
+ nvidia,bus-addr = <0x34>;
+ nvidia,reg-addr = <0x14>;
+ nvidia,reg-data = <0x8>;
+ };
};
memory-controller@7000f400 {
@@ -483,79 +682,87 @@
};
};
+ /* EHCI instance 1: ULPI PHY -> AX88772B (On-module) */
usb@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
- GPIO_ACTIVE_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ asix@1 {
+ reg = <1>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
};
usb-phy@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
- GPIO_ACTIVE_LOW>;
+ nvidia,phy-reset-gpio =
+ <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+ vbus-supply = <&reg_lan_v_bus>;
};
- sdhci@c8000600 {
- cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+ clk32k_in: xtal3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ reg_lan_v_bus: regulator-lan-v-bus {
+ compatible = "regulator-fixed";
+ regulator-name = "LAN_V_BUS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd_3v3_reg: regulator@100 {
- compatible = "regulator-fixed";
- reg = <100>;
- regulator-name = "vdd_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- regulator@101 {
- compatible = "regulator-fixed";
- reg = <101>;
- regulator-name = "internal_usb";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-boot-on;
- regulator-always-on;
- gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
- };
+ reg_module_3v3: regulator-module-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
sound {
compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
- "nvidia,tegra-audio-wm9712";
- nvidia,model = "Colibri T20 AC97 Audio";
-
+ "nvidia,tegra-audio-wm9712";
+ nvidia,model = "Toradex Colibri T20";
nvidia,audio-routing =
"Headphone", "HPOUTL",
"Headphone", "HPOUTR",
"LineIn", "LINEINL",
"LineIn", "LINEINR",
"Mic", "MIC1";
-
- nvidia,ac97-controller = <&ac97>;
-
+ nvidia,ac97-controller = <&tegra_ac97>;
clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
<&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
<&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
+
+&gpio {
+ lan-reset-n {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "LAN_RESET#";
+ };
+
+ /* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */
+ npwe {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "Tri-state nPWE";
+ };
+
+ /* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */
+ rdnwr {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "Not tri-state RDnWR";
+ };
+};
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index ef245291924f..8861e0976e37 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -303,7 +303,7 @@
request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
slave-addr = <138>;
clocks = <&tegra_car TEGRA20_CLK_I2C3>,
- <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+ <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 67>;
reset-names = "i2c";
@@ -524,10 +524,10 @@
gpio-keys {
compatible = "gpio-keys";
- power {
- label = "Power";
+ wakeup {
+ label = "Wakeup";
gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
+ linux,code = <KEY_WAKEUP>;
wakeup-source;
};
};
@@ -599,8 +599,8 @@
GPIO_ACTIVE_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
- <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
- <&tegra_car TEGRA20_CLK_CDEV1>;
+ <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 15b73bd377f0..20869757d32f 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -419,19 +419,6 @@
status = "disabled";
};
- gmi@70009000 {
- compatible = "nvidia,tegra20-gmi";
- reg = <0x70009000 0x1000>;
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0xd0000000 0xfffffff>;
- clocks = <&tegra_car TEGRA20_CLK_NOR>;
- clock-names = "gmi";
- resets = <&tegra_car 42>;
- reset-names = "gmi";
- status = "disabled";
- };
-
nand-controller@70008000 {
compatible = "nvidia,tegra20-nand";
reg = <0x70008000 0x100>;
@@ -447,6 +434,19 @@
status = "disabled";
};
+ gmi@70009000 {
+ compatible = "nvidia,tegra20-gmi";
+ reg = <0x70009000 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0xd0000000 0xfffffff>;
+ clocks = <&tegra_car TEGRA20_CLK_NOR>;
+ clock-names = "gmi";
+ resets = <&tegra_car 42>;
+ reset-names = "gmi";
+ status = "disabled";
+ };
+
pwm: pwm@7000a000 {
compatible = "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
@@ -865,5 +865,7 @@
compatible = "arm,cortex-a9-pmu";
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&{/cpus/cpu@0}>,
+ <&{/cpus/cpu@1}>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
index 0dc85a20bd45..749fc6d1ff70 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -6,11 +6,12 @@
/ {
model = "Toradex Apalis T30 on Apalis Evaluation Board";
- compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30", "nvidia,tegra30";
+ compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30",
+ "nvidia,tegra30";
aliases {
rtc0 = "/i2c@7000c000/rtc@68";
- rtc1 = "/i2c@7000d000/tps65911@2d";
+ rtc1 = "/i2c@7000d000/pmic@2d";
rtc2 = "/rtc@7000e000";
serial0 = &uarta;
serial1 = &uartb;
@@ -23,8 +24,6 @@
};
pcie@3000 {
- status = "okay";
-
pci@1,0 {
status = "okay";
};
@@ -32,10 +31,6 @@
pci@2,0 {
status = "okay";
};
-
- pci@3,0 {
- status = "okay";
- };
};
host1x@50000000 {
@@ -45,27 +40,30 @@
nvidia,panel = <&panel>;
};
};
+
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <&reg_5v0>;
};
};
+ /* Apalis UART1 */
serial@70006000 {
status = "okay";
};
+ /* Apalis UART2 */
serial@70006040 {
- compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
+ /* Apalis UART3 */
serial@70006200 {
- compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
+ /* Apalis UART4 */
serial@70006300 {
- compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
@@ -99,13 +97,13 @@
* CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
* carrier board)
*/
- cami2c: i2c@7000c500 {
+ i2c@7000c500 {
status = "okay";
clock-frequency = <400000>;
};
/* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
- hdmiddc: i2c@7000c700 {
+ i2c@7000c700 {
status = "okay";
};
@@ -113,29 +111,16 @@
spi@7000d400 {
status = "okay";
spi-max-frequency = <25000000>;
- spidev0: spidev@1 {
- compatible = "spidev";
- reg = <1>;
- spi-max-frequency = <25000000>;
- };
};
/* SPI5: Apalis SPI2 */
spi@7000dc00 {
status = "okay";
spi-max-frequency = <25000000>;
- spidev1: spidev@2 {
- compatible = "spidev";
- reg = <2>;
- spi-max-frequency = <25000000>;
- };
- };
-
- hda@70030000 {
- status = "okay";
};
- sd1: sdhci@78000000 {
+ /* Apalis SD1 */
+ sdhci@78000000 {
status = "okay";
bus-width = <4>;
/* SD1_CD# */
@@ -143,7 +128,8 @@
no-1-8-v;
};
- mmc1: sdhci@78000400 {
+ /* Apalis MMC1 */
+ sdhci@78000400 {
status = "okay";
bus-width = <8>;
/* MMC1_CD# */
@@ -154,12 +140,12 @@
/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
usb@7d000000 {
status = "okay";
+ dr_mode = "otg";
};
usb-phy@7d000000 {
status = "okay";
- dr_mode = "otg";
- vbus-supply = <&usbo1_vbus_reg>;
+ vbus-supply = <&reg_usbo1_vbus>;
};
/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
@@ -169,7 +155,7 @@
usb-phy@7d004000 {
status = "okay";
- vbus-supply = <&usbh_vbus_reg>;
+ vbus-supply = <&reg_usbh_vbus>;
};
/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
@@ -179,18 +165,17 @@
usb-phy@7d008000 {
status = "okay";
- vbus-supply = <&usbh_vbus_reg>;
+ vbus-supply = <&reg_usbh_vbus>;
};
backlight: backlight {
compatible = "pwm-backlight";
-
- /* PWM_BKL1 */
- pwms = <&pwm 0 5000000>;
brightness-levels = <255 231 223 207 191 159 127 0>;
default-brightness-level = <6>;
/* BKL1_ON */
enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <&reg_3v3>;
+ pwms = <&pwm 0 5000000>; /* BKL1_PWM */
};
gpio-keys {
@@ -211,64 +196,53 @@
* edt,et070080dh6: EDT 7.0" LCD TFT
*/
compatible = "edt,et057090dhu", "simple-panel";
-
backlight = <&backlight>;
+ power-supply = <&reg_3v3>;
};
- pwmleds {
- compatible = "pwm-leds";
-
- pwm1 {
- label = "PWM1";
- pwms = <&pwm 3 19600>;
- max-brightness = <255>;
- };
-
- pwm2 {
- label = "PWM2";
- pwms = <&pwm 2 19600>;
- max-brightness = <255>;
- };
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
- pwm3 {
- label = "PWM3";
- pwms = <&pwm 1 19600>;
- max-brightness = <255>;
- };
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
};
- regulators {
- sys_5v0_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ /* USBO1_EN */
+ reg_usbo1_vbus: regulator-usbo1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USBO1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&reg_5v0>;
+ };
- /* USBO1_EN */
- usbo1_vbus_reg: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "usbo1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&sys_5v0_reg>;
- };
+ /* USBH_EN */
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&reg_5v0>;
+ };
+};
- /* USBH_EN */
- usbh_vbus_reg: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "usbh_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&sys_5v0_reg>;
- };
+&gpio {
+ /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+ pex-perst-n {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PEX_PERST_N";
};
};
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
new file mode 100644
index 000000000000..0be50e881684
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra30-apalis-v1.1.dtsi"
+
+/ {
+ model = "Toradex Apalis T30 on Apalis Evaluation Board";
+ compatible = "toradex,apalis_t30-v1.1-eval", "toradex,apalis_t30-eval",
+ "toradex,apalis_t30-v1.1", "toradex,apalis_t30",
+ "nvidia,tegra30";
+
+ aliases {
+ rtc0 = "/i2c@7000c000/rtc@68";
+ rtc1 = "/i2c@7000d000/pmic@2d";
+ rtc2 = "/rtc@7000e000";
+ serial0 = &uarta;
+ serial1 = &uartb;
+ serial2 = &uartc;
+ serial3 = &uartd;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ pcie@3000 {
+ pci@1,0 {
+ status = "okay";
+ };
+
+ pci@2,0 {
+ status = "okay";
+ };
+ };
+
+ host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+ nvidia,panel = <&panel>;
+ };
+ };
+
+ hdmi@54280000 {
+ status = "okay";
+ hdmi-supply = <&reg_5v0>;
+ };
+ };
+
+ /* Apalis UART1 */
+ serial@70006000 {
+ status = "okay";
+ };
+
+ /* Apalis UART2 */
+ serial@70006040 {
+ status = "okay";
+ };
+
+ /* Apalis UART3 */
+ serial@70006200 {
+ status = "okay";
+ };
+
+ /* Apalis UART4 */
+ serial@70006300 {
+ status = "okay";
+ };
+
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ /*
+ * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+ * board)
+ */
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pcie-switch@58 {
+ compatible = "plx,pex8605";
+ reg = <0x58>;
+ };
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ };
+ };
+
+ /* GEN2_I2C: unused */
+
+ /*
+ * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
+ * carrier board)
+ */
+ i2c@7000c500 {
+ status = "okay";
+ clock-frequency = <400000>;
+ };
+
+ /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
+ i2c@7000c700 {
+ status = "okay";
+ };
+
+ /* SPI1: Apalis SPI1 */
+ spi@7000d400 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ };
+
+ /* SPI5: Apalis SPI2 */
+ spi@7000dc00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ };
+
+ /* Apalis SD1 */
+ sdhci@78000000 {
+ status = "okay";
+ bus-width = <4>;
+ /* SD1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ };
+
+ /* Apalis MMC1 */
+ sdhci@78000400 {
+ status = "okay";
+ bus-width = <8>;
+ /* MMC1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+ vqmmc-supply = <&reg_vddio_sdmmc3>;
+ };
+
+ /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+ usb@7d000000 {
+ status = "okay";
+ dr_mode = "otg";
+ };
+
+ usb-phy@7d000000 {
+ status = "okay";
+ vbus-supply = <&reg_usbo1_vbus>;
+ };
+
+ /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+ usb@7d004000 {
+ status = "okay";
+ };
+
+ usb-phy@7d004000 {
+ status = "okay";
+ vbus-supply = <&reg_usbh_vbus>;
+ };
+
+ /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
+ usb@7d008000 {
+ status = "okay";
+ };
+
+ usb-phy@7d008000 {
+ status = "okay";
+ vbus-supply = <&reg_usbh_vbus>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <255 231 223 207 191 159 127 0>;
+ default-brightness-level = <6>;
+ /* BKL1_ON */
+ enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <&reg_3v3>;
+ pwms = <&pwm 0 5000000>; /* BKL1_PWM */
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ wakeup {
+ label = "WAKE1_MICO";
+ gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu", "simple-panel";
+ backlight = <&backlight>;
+ power-supply = <&reg_3v3>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ /* USBO1_EN */
+ reg_usbo1_vbus: regulator-usbo1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USBO1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&reg_5v0>;
+ };
+
+ /* USBH_EN */
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&reg_5v0>;
+ };
+
+ /*
+ * 1.8 volt resp. 3.3 volt VDDIO_SDMMC3 depending on
+ * EN_+3.3_SDMMC3 GPIO
+ */
+ reg_vddio_sdmmc3: regulator-vddio-sdmmc3 {
+ compatible = "regulator-gpio";
+ regulator-name = "VDDIO_SDMMC3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-type = "voltage";
+ gpios = <&gpio TEGRA_GPIO(J, 5) GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x0
+ 3300000 0x1>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vddio_sdmmc_1v8_reg>;
+ };
+};
+
+&gpio {
+ /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+ pex-perst-n {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PEX_PERST_N";
+ };
+};
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
new file mode 100644
index 000000000000..02f8126481a2
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
@@ -0,0 +1,1189 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Apalis T30 Module Device Tree
+ * Compatible for Revisions 1GB: V1.1A, V1.1B; 1GB IT: V1.1A, V1.1B;
+ * 2GB: V1.1A, V1.1B
+ */
+/ {
+ memory@80000000 {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ pcie@3000 {
+ status = "okay";
+ avdd-pexa-supply = <&vdd2_reg>;
+ avdd-pexb-supply = <&vdd2_reg>;
+ avdd-pex-pll-supply = <&vdd2_reg>;
+ avdd-plle-supply = <&ldo6_reg>;
+ hvdd-pex-supply = <&reg_module_3v3>;
+ vddio-pex-ctl-supply = <&reg_module_3v3>;
+ vdd-pexa-supply = <&vdd2_reg>;
+ vdd-pexb-supply = <&vdd2_reg>;
+
+ /* Apalis type specific */
+ pci@1,0 {
+ nvidia,num-lanes = <4>;
+ };
+
+ /* Apalis PCIe */
+ pci@2,0 {
+ nvidia,num-lanes = <1>;
+ };
+
+ /* I210/I211 Gigabit Ethernet Controller (on-module) */
+ pci@3,0 {
+ status = "okay";
+ nvidia,num-lanes = <1>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+
+ host1x@50000000 {
+ hdmi@54280000 {
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ pll-supply = <&reg_1v8_avdd_hdmi_pll>;
+ vdd-supply = <&reg_3v3_avdd_hdmi>;
+ };
+ };
+
+ pinmux@70000868 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ /* Analogue Audio (On-module) */
+ clk1-out-pw4 {
+ nvidia,pins = "clk1_out_pw4";
+ nvidia,function = "extperiph1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap3-fs-pp0 {
+ nvidia,pins = "dap3_fs_pp0",
+ "dap3_sclk_pp3",
+ "dap3_din_pp1",
+ "dap3_dout_pp2";
+ nvidia,function = "i2s2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis BKL1_ON */
+ pv2 {
+ nvidia,pins = "pv2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis BKL1_PWM */
+ uart3-rts-n-pc0 {
+ nvidia,pins = "uart3_rts_n_pc0";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
+ uart3-cts-n-pa1 {
+ nvidia,pins = "uart3_cts_n_pa1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis CAN1 on SPI6 */
+ spi2-cs0-n-px3 {
+ nvidia,pins = "spi2_cs0_n_px3",
+ "spi2_miso_px1",
+ "spi2_mosi_px0",
+ "spi2_sck_px2";
+ nvidia,function = "spi6";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* CAN_INT1 */
+ spi2-cs1-n-pw2 {
+ nvidia,pins = "spi2_cs1_n_pw2";
+ nvidia,function = "spi3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis CAN2 on SPI4 */
+ gmi-a16-pj7 {
+ nvidia,pins = "gmi_a16_pj7",
+ "gmi_a17_pb0",
+ "gmi_a18_pb1",
+ "gmi_a19_pk7";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* CAN_INT2 */
+ spi2-cs2-n-pw3 {
+ nvidia,pins = "spi2_cs2_n_pw3";
+ nvidia,function = "spi3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis Digital Audio */
+ clk1-req-pee2 {
+ nvidia,pins = "clk1_req_pee2";
+ nvidia,function = "hda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ clk2-out-pw5 {
+ nvidia,pins = "clk2_out_pw5";
+ nvidia,function = "extperiph2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap1-fs-pn0 {
+ nvidia,pins = "dap1_fs_pn0",
+ "dap1_din_pn1",
+ "dap1_dout_pn2",
+ "dap1_sclk_pn3";
+ nvidia,function = "hda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis GPIO */
+ kb-col0-pq0 {
+ nvidia,pins = "kb_col0_pq0",
+ "kb_col1_pq1",
+ "kb_row10_ps2",
+ "kb_row11_ps3",
+ "kb_row12_ps4",
+ "kb_row13_ps5",
+ "kb_row14_ps6",
+ "kb_row15_ps7";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Multiplexed and therefore disabled */
+ owr {
+ nvidia,pins = "owr";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis HDMI1 */
+ hdmi-cec-pee3 {
+ nvidia,pins = "hdmi_cec_pee3";
+ nvidia,function = "cec";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ hdmi-int-pn7 {
+ nvidia,pins = "hdmi_int_pn7";
+ nvidia,function = "hdmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C1 */
+ gen1-i2c-scl-pc4 {
+ nvidia,pins = "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C2 (DDC) */
+ ddc-scl-pv4 {
+ nvidia,pins = "ddc_scl_pv4",
+ "ddc_sda_pv5";
+ nvidia,function = "i2c4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C3 (CAM) */
+ cam-i2c-scl-pbb1 {
+ nvidia,pins = "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2";
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis LCD1 */
+ lcd-d0-pe0 {
+ nvidia,pins = "lcd_d0_pe0",
+ "lcd_d1_pe1",
+ "lcd_d2_pe2",
+ "lcd_d3_pe3",
+ "lcd_d4_pe4",
+ "lcd_d5_pe5",
+ "lcd_d6_pe6",
+ "lcd_d7_pe7",
+ "lcd_d8_pf0",
+ "lcd_d9_pf1",
+ "lcd_d10_pf2",
+ "lcd_d11_pf3",
+ "lcd_d12_pf4",
+ "lcd_d13_pf5",
+ "lcd_d14_pf6",
+ "lcd_d15_pf7",
+ "lcd_d16_pm0",
+ "lcd_d17_pm1",
+ "lcd_d18_pm2",
+ "lcd_d19_pm3",
+ "lcd_d20_pm4",
+ "lcd_d21_pm5",
+ "lcd_d22_pm6",
+ "lcd_d23_pm7",
+ "lcd_de_pj1",
+ "lcd_hsync_pj3",
+ "lcd_pclk_pb3",
+ "lcd_vsync_pj4";
+ nvidia,function = "displaya";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis MMC1 */
+ sdmmc3-clk-pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc3-dat0-pb7 {
+ nvidia,pins = "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4",
+ "sdmmc3_dat4_pd1",
+ "sdmmc3_dat5_pd0",
+ "sdmmc3_dat6_pd3",
+ "sdmmc3_dat7_pd4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* Apalis MMC1_CD# */
+ pv3 {
+ nvidia,pins = "pv3";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis Parallel Camera */
+ cam-mclk-pcc0 {
+ nvidia,pins = "cam_mclk_pcc0";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ vi-vsync-pd6 {
+ nvidia,pins = "vi_d0_pt4",
+ "vi_d1_pd5",
+ "vi_d2_pl0",
+ "vi_d3_pl1",
+ "vi_d4_pl2",
+ "vi_d5_pl3",
+ "vi_d6_pl4",
+ "vi_d7_pl5",
+ "vi_d8_pl6",
+ "vi_d9_pl7",
+ "vi_d10_pt2",
+ "vi_d11_pt3",
+ "vi_hsync_pd7",
+ "vi_pclk_pt0",
+ "vi_vsync_pd6";
+ nvidia,function = "vi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Multiplexed and therefore disabled */
+ kb-col2-pq2 {
+ nvidia,pins = "kb_col2_pq2",
+ "kb_col3_pq3",
+ "kb_col4_pq4",
+ "kb_row4_pr4";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-row0-pr0 {
+ nvidia,pins = "kb_row0_pr0",
+ "kb_row1_pr1",
+ "kb_row2_pr2",
+ "kb_row3_pr3";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-row5-pr5 {
+ nvidia,pins = "kb_row5_pr5",
+ "kb_row6_pr6",
+ "kb_row7_pr7";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /*
+ * VI level-shifter direction
+ * (pull-down => default direction input)
+ */
+ vi-mclk-pt1 {
+ nvidia,pins = "vi_mclk_pt1";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM1 */
+ pu6 {
+ nvidia,pins = "pu6";
+ nvidia,function = "pwm3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM2 */
+ pu5 {
+ nvidia,pins = "pu5";
+ nvidia,function = "pwm2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM3 */
+ pu4 {
+ nvidia,pins = "pu4";
+ nvidia,function = "pwm1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM4 */
+ pu3 {
+ nvidia,pins = "pu3";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis RESET_MOCI# */
+ gmi-rst-n-pi4 {
+ nvidia,pins = "gmi_rst_n_pi4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis SATA1_ACT# */
+ pex-l0-prsnt-n-pdd0 {
+ nvidia,pins = "pex_l0_prsnt_n_pdd0";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis SD1 */
+ sdmmc1-clk-pz0 {
+ nvidia,pins = "sdmmc1_clk_pz0";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc1-cmd-pz1 {
+ nvidia,pins = "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat3_py4";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* Apalis SD1_CD# */
+ clk2-req-pcc5 {
+ nvidia,pins = "clk2_req_pcc5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis SPDIF1 */
+ spdif-out-pk5 {
+ nvidia,pins = "spdif_out_pk5",
+ "spdif_in_pk6";
+ nvidia,function = "spdif";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis SPI1 */
+ spi1-sck-px5 {
+ nvidia,pins = "spi1_sck_px5",
+ "spi1_mosi_px4",
+ "spi1_miso_px7",
+ "spi1_cs0_n_px6";
+ nvidia,function = "spi1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis SPI2 */
+ lcd-sck-pz4 {
+ nvidia,pins = "lcd_sck_pz4",
+ "lcd_sdout_pn5",
+ "lcd_sdin_pz2",
+ "lcd_cs0_n_pn4";
+ nvidia,function = "spi5";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /*
+ * Apalis TS (Low-speed type specific)
+ * pins may be used as GPIOs
+ */
+ kb-col5-pq5 {
+ nvidia,pins = "kb_col5_pq5";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb-col6-pq6 {
+ nvidia,pins = "kb_col6_pq6",
+ "kb_col7_pq7",
+ "kb_row8_ps0",
+ "kb_row9_ps1";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis UART1 */
+ ulpi-data0 {
+ nvidia,pins = "ulpi_data0_po1",
+ "ulpi_data1_po2",
+ "ulpi_data2_po3",
+ "ulpi_data3_po4",
+ "ulpi_data4_po5",
+ "ulpi_data5_po6",
+ "ulpi_data6_po7",
+ "ulpi_data7_po0";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART2 */
+ ulpi-clk-py0 {
+ nvidia,pins = "ulpi_clk_py0",
+ "ulpi_dir_py1",
+ "ulpi_nxt_py2",
+ "ulpi_stp_py3";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART3 */
+ uart2-rxd-pc3 {
+ nvidia,pins = "uart2_rxd_pc3",
+ "uart2_txd_pc2";
+ nvidia,function = "uartb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART4 */
+ uart3-rxd-pw7 {
+ nvidia,pins = "uart3_rxd_pw7",
+ "uart3_txd_pw6";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBH_EN */
+ pex-l0-rst-n-pdd1 {
+ nvidia,pins = "pex_l0_rst_n_pdd1";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBH_OC# */
+ pex-l0-clkreq-n-pdd2 {
+ nvidia,pins = "pex_l0_clkreq_n_pdd2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis USBO1_EN */
+ gen2-i2c-scl-pt5 {
+ nvidia,pins = "gen2_i2c_scl_pt5";
+ nvidia,function = "rsvd4";
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBO1_OC# */
+ gen2-i2c-sda-pt6 {
+ nvidia,pins = "gen2_i2c_sda_pt6";
+ nvidia,function = "rsvd4";
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis VGA1 not supported and therefore disabled */
+ crt-hsync-pv6 {
+ nvidia,pins = "crt_hsync_pv6",
+ "crt_vsync_pv7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis WAKE1_MICO */
+ pv1 {
+ nvidia,pins = "pv1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* eMMC (On-module) */
+ sdmmc4-clk-pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_cmd_pt7",
+ "sdmmc4_rst_n_pcc3";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4-dat0-paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* EN_+3.3_SDMMC3 */
+ uart2-cts-n-pj5 {
+ nvidia,pins = "uart2_cts_n_pj5";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* LAN i210/i211 DEV_OFF_N, PE_RST_N (On-module) */
+ pex-l2-prsnt-n-pdd7 {
+ nvidia,pins = "pex_l2_prsnt_n_pdd7",
+ "pex_l2_rst_n_pcc6";
+ nvidia,function = "pcie";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* LAN i210/i211 PE_WAKE_N, SDP3 (On-module) */
+ pex-wake-n-pdd3 {
+ nvidia,pins = "pex_wake_n_pdd3",
+ "pex_l2_clkreq_n_pcc7";
+ nvidia,function = "pcie";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* LAN i210/i211 SMB_ALERT_N (On-module) */
+ sys-clk-req-pz5 {
+ nvidia,pins = "sys_clk_req_pz5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* LVDS Transceiver Configuration */
+ pbb0 {
+ nvidia,pins = "pbb0",
+ "pbb7",
+ "pcc1",
+ "pcc2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pbb3 {
+ nvidia,pins = "pbb3",
+ "pbb4",
+ "pbb5",
+ "pbb6";
+ nvidia,function = "displayb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Not connected and therefore disabled */
+ clk-32k-out-pa0 {
+ nvidia,pins = "clk3_out_pee0",
+ "clk3_req_pee1",
+ "clk_32k_out_pa0",
+ "dap4_din_pp5",
+ "dap4_dout_pp6",
+ "dap4_fs_pp4",
+ "dap4_sclk_pp7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap2-fs-pa2 {
+ nvidia,pins = "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5",
+ "lcd_dc0_pn6",
+ "lcd_m1_pw1",
+ "lcd_pwr1_pc1",
+ "pex_l1_clkreq_n_pdd6",
+ "pex_l1_prsnt_n_pdd4",
+ "pex_l1_rst_n_pdd5";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-ad0-pg0 {
+ nvidia,pins = "gmi_ad0_pg0",
+ "gmi_ad2_pg2",
+ "gmi_ad3_pg3",
+ "gmi_ad4_pg4",
+ "gmi_ad5_pg5",
+ "gmi_ad6_pg6",
+ "gmi_ad7_pg7",
+ "gmi_ad8_ph0",
+ "gmi_ad9_ph1",
+ "gmi_ad10_ph2",
+ "gmi_ad11_ph3",
+ "gmi_ad12_ph4",
+ "gmi_ad13_ph5",
+ "gmi_ad14_ph6",
+ "gmi_ad15_ph7",
+ "gmi_adv_n_pk0",
+ "gmi_clk_pk1",
+ "gmi_cs4_n_pk2",
+ "gmi_cs2_n_pk3",
+ "gmi_dqs_pi2",
+ "gmi_iordy_pi5",
+ "gmi_oe_n_pi1",
+ "gmi_wait_pi7",
+ "gmi_wr_n_pi0",
+ "lcd_cs1_n_pw0",
+ "pu0",
+ "pu1",
+ "pu2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs0-n-pj0 {
+ nvidia,pins = "gmi_cs0_n_pj0",
+ "gmi_cs1_n_pj2",
+ "gmi_cs3_n_pk4";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs6-n-pi3 {
+ nvidia,pins = "gmi_cs6_n_pi3";
+ nvidia,function = "sata";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs7-n-pi6 {
+ nvidia,pins = "gmi_cs7_n_pi6";
+ nvidia,function = "gmi_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ lcd-pwr0-pb2 {
+ nvidia,pins = "lcd_pwr0_pb2",
+ "lcd_pwr2_pc6",
+ "lcd_wr_n_pz3";
+ nvidia,function = "hdcp";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ uart2-rts-n-pj6 {
+ nvidia,pins = "uart2_rts_n_pj6";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Power I2C (On-module) */
+ pwr-i2c-scl-pz6 {
+ nvidia,pins = "pwr_i2c_scl_pz6",
+ "pwr_i2c_sda_pz7";
+ nvidia,function = "i2cpwr";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /*
+ * THERMD_ALERT#, unlatched I2C address pin of LM95245
+ * temperature sensor therefore requires disabling for
+ * now
+ */
+ lcd-dc1-pd2 {
+ nvidia,pins = "lcd_dc1_pd2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* TOUCH_PEN_INT# (On-module) */
+ pv0 {
+ nvidia,pins = "pv0";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ };
+ };
+
+ serial@70006040 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ serial@70006200 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ hdmi_ddc: i2c@7000c700 {
+ clock-frequency = <10000>;
+ };
+
+ /*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ /* SGTL5000 audio codec */
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <&reg_module_3v3_audio>;
+ VDDD-supply = <&reg_1v8_vio>;
+ VDDIO-supply = <&reg_module_3v3>;
+ clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
+ };
+
+ pmic: pmic@2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ vcc1-supply = <&reg_module_3v3>;
+ vcc2-supply = <&reg_module_3v3>;
+ vcc3-supply = <&reg_1v8_vio>;
+ vcc4-supply = <&reg_module_3v3>;
+ vcc5-supply = <&reg_module_3v3>;
+ vcc6-supply = <&reg_1v8_vio>;
+ vcc7-supply = <&reg_5v0_charge_pump>;
+ vccio-supply = <&reg_module_3v3>;
+
+ regulators {
+ vdd1_reg: vdd1 {
+ regulator-name = "+V1.35_VDDIO_DDR";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ vdd2_reg: vdd2 {
+ regulator-name = "+V1.05";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ vddctrl_reg: vddctrl {
+ regulator-name = "+V1.0_VDD_CPU";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ };
+
+ reg_1v8_vio: vio {
+ regulator-name = "+V1.8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ /*
+ * 1.8 volt +VDDIO_SDMMC3 in case EN_+3.3_SDMMC3
+ * is off
+ */
+ vddio_sdmmc_1v8_reg: ldo1 {
+ regulator-name = "+VDDIO_SDMMC3_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ /*
+ * EN_+V3.3 switching via FET:
+ * +V3.3_AUDIO_AVDD_S, +V3.3
+ * see also +V3.3 fixed supply
+ */
+ ldo2_reg: ldo2 {
+ regulator-name = "EN_+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-name = "+V1.2_CSI";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-name = "+V1.2_VDD_RTC";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ /*
+ * +V2.8_AVDD_VDAC:
+ * only required for (unsupported) analog RGB
+ */
+ ldo5_reg: ldo5 {
+ regulator-name = "+V2.8_AVDD_VDAC";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ /*
+ * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+ * but LDO6 can't set voltage in 50mV
+ * granularity
+ */
+ ldo6_reg: ldo6 {
+ regulator-name = "+V1.05_AVDD_PLLE";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-name = "+V1.2_AVDD_PLL";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-name = "+V1.0_VDD_DDR_HS";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ /* STMPE811 touch screen controller */
+ touchscreen@41 {
+ compatible = "st,stmpe811";
+ reg = <0x41>;
+ irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ id = <0>;
+ blocks = <0x5>;
+ irq-trigger = <0x1>;
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 8 sample average control */
+ st,ave-ctrl = <3>;
+ /* 7 length fractional part in z */
+ st,fraction-z = <7>;
+ /*
+ * 50 mA typical 80 mA max touchscreen drivers
+ * current limit value
+ */
+ st,i-drive = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
+ /* 1 ms panel driver settling time */
+ st,settling = <3>;
+ /* 5 ms touch detect interrupt delay */
+ st,touch-det-delay = <5>;
+ };
+ };
+
+ /*
+ * LM95245 temperature sensor
+ * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
+ */
+ temp-sensor@4c {
+ compatible = "national,lm95245";
+ reg = <0x4c>;
+ };
+
+ /* SW: +V1.2_VDD_CORE */
+ regulator@60 {
+ compatible = "ti,tps62362";
+ reg = <0x60>;
+
+ regulator-name = "tps62362-vout";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ti,vsel0-state-low;
+ /* VSEL1: EN_CORE_DVFS_N low for DVFS */
+ ti,vsel1-state-low;
+ };
+ };
+
+ /* SPI4: CAN2 */
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <10000000>;
+
+ can@1 {
+ compatible = "microchip,mcp2515";
+ reg = <1>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ /* SPI6: CAN1 */
+ spi@7000de00 {
+ status = "okay";
+ spi-max-frequency = <10000000>;
+
+ can@0 {
+ compatible = "microchip,mcp2515";
+ reg = <0>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ pmc@7000e400 {
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <1>;
+ nvidia,cpu-pwr-good-time = <5000>;
+ nvidia,cpu-pwr-off-time = <5000>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <0>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+
+ /* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <4>;
+ nvidia,bus-addr = <0x2d>;
+ nvidia,reg-addr = <0x3f>;
+ nvidia,reg-data = <0x1>;
+ };
+ };
+
+ hda@70030000 {
+ status = "okay";
+ };
+
+ ahub@70080000 {
+ i2s@70080500 {
+ status = "okay";
+ };
+ };
+
+ /* eMMC */
+ sdhci@78000600 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ vmmc-supply = <&reg_module_3v3>; /* VCC */
+ vqmmc-supply = <&reg_1v8_vio>; /* VCCQ */
+ mmc-ddr-1_8v;
+ };
+
+ clk32k_in: xtal1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ clk16m: osc4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ };
+
+ reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+ compatible = "regulator-fixed";
+ regulator-name = "+V1.8_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&reg_1v8_vio>;
+ };
+
+ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&reg_module_3v3>;
+ };
+
+ reg_5v0_charge_pump: regulator-5v0-charge-pump {
+ compatible = "regulator-fixed";
+ regulator-name = "+V5.0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_module_3v3: regulator-module-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_module_3v3_audio: regulator-module-3v3-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AUDIO_AVDD_S";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
+ "nvidia,tegra-audio-sgtl5000";
+ nvidia,model = "Toradex Apalis T30";
+ nvidia,audio-routing =
+ "Headphone Jack", "HP_OUT",
+ "LINE_IN", "Line In Jack",
+ "MIC_IN", "Mic Jack";
+ nvidia,i2s-controller = <&tegra_i2s2>;
+ nvidia,audio-codec = <&sgtl5000>;
+ clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+ <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA30_CLK_EXTERN1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+ };
+};
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 2f807d40c1b7..7f112f192fe9 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -3,48 +3,53 @@
/*
* Toradex Apalis T30 Module Device Tree
- * Compatible for Revisions 1GB: V1.0A, V1.1A; 1GB IT: V1.1A;
- * 2GB: V1.0B, V1.0C, V1.0E, V1.1A
+ * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C, V1.0E
*/
/ {
- model = "Toradex Apalis T30";
- compatible = "toradex,apalis_t30", "nvidia,tegra30";
-
memory@80000000 {
reg = <0x80000000 0x40000000>;
};
pcie@3000 {
+ status = "okay";
avdd-pexa-supply = <&vdd2_reg>;
- vdd-pexa-supply = <&vdd2_reg>;
avdd-pexb-supply = <&vdd2_reg>;
- vdd-pexb-supply = <&vdd2_reg>;
avdd-pex-pll-supply = <&vdd2_reg>;
avdd-plle-supply = <&ldo6_reg>;
- vddio-pex-ctl-supply = <&sys_3v3_reg>;
- hvdd-pex-supply = <&sys_3v3_reg>;
+ hvdd-pex-supply = <&reg_module_3v3>;
+ vddio-pex-ctl-supply = <&reg_module_3v3>;
+ vdd-pexa-supply = <&vdd2_reg>;
+ vdd-pexb-supply = <&vdd2_reg>;
+ /* Apalis type specific */
pci@1,0 {
nvidia,num-lanes = <4>;
};
+ /* Apalis PCIe */
pci@2,0 {
nvidia,num-lanes = <1>;
};
+ /* I210/I211 Gigabit Ethernet Controller (on-module) */
pci@3,0 {
+ status = "okay";
nvidia,num-lanes = <1>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
};
};
host1x@50000000 {
hdmi@54280000 {
- vdd-supply = <&avdd_hdmi_3v3_reg>;
- pll-supply = <&avdd_hdmi_pll_1v8_reg>;
-
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
- nvidia,ddc-i2c-bus = <&hdmiddc>;
+ pll-supply = <&reg_1v8_avdd_hdmi_pll>;
+ vdd-supply = <&reg_3v3_avdd_hdmi>;
};
};
@@ -54,18 +59,18 @@
state_default: pinmux {
/* Analogue Audio (On-module) */
- clk1_out_pw4 {
+ clk1-out-pw4 {
nvidia,pins = "clk1_out_pw4";
nvidia,function = "extperiph1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_fs_pp0 {
- nvidia,pins = "dap3_fs_pp0",
- "dap3_sclk_pp3",
- "dap3_din_pp1",
- "dap3_dout_pp2";
+ dap3-fs-pp0 {
+ nvidia,pins = "dap3_fs_pp0",
+ "dap3_sclk_pp3",
+ "dap3_din_pp1",
+ "dap3_dout_pp2";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -77,25 +82,28 @@
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* Apalis BKL1_PWM */
- uart3_rts_n_pc0 {
+ uart3-rts-n-pc0 {
nvidia,pins = "uart3_rts_n_pc0";
nvidia,function = "pwm0";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
- uart3_cts_n_pa1 {
+ uart3-cts-n-pa1 {
nvidia,pins = "uart3_cts_n_pa1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* Apalis CAN1 on SPI6 */
- spi2_cs0_n_px3 {
+ spi2-cs0-n-px3 {
nvidia,pins = "spi2_cs0_n_px3",
"spi2_miso_px1",
"spi2_mosi_px0",
@@ -105,7 +113,7 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
/* CAN_INT1 */
- spi2_cs1_n_pw2 {
+ spi2-cs1-n-pw2 {
nvidia,pins = "spi2_cs1_n_pw2";
nvidia,function = "spi3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -114,7 +122,7 @@
};
/* Apalis CAN2 on SPI4 */
- gmi_a16_pj7 {
+ gmi-a16-pj7 {
nvidia,pins = "gmi_a16_pj7",
"gmi_a17_pb0",
"gmi_a18_pb1",
@@ -125,7 +133,7 @@
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
/* CAN_INT2 */
- spi2_cs2_n_pw3 {
+ spi2-cs2-n-pw3 {
nvidia,pins = "spi2_cs2_n_pw3";
nvidia,function = "spi3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -134,20 +142,20 @@
};
/* Apalis Digital Audio */
- clk1_req_pee2 {
+ clk1-req-pee2 {
nvidia,pins = "clk1_req_pee2";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- clk2_out_pw5 {
+ clk2-out-pw5 {
nvidia,pins = "clk2_out_pw5";
nvidia,function = "extperiph2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_fs_pn0 {
+ dap1-fs-pn0 {
nvidia,pins = "dap1_fs_pn0",
"dap1_din_pn1",
"dap1_dout_pn2",
@@ -157,28 +165,125 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- /* Apalis I2C3 */
- cam_i2c_scl_pbb1 {
+ /* Apalis GPIO */
+ kb-col0-pq0 {
+ nvidia,pins = "kb_col0_pq0",
+ "kb_col1_pq1",
+ "kb_row10_ps2",
+ "kb_row11_ps3",
+ "kb_row12_ps4",
+ "kb_row13_ps5",
+ "kb_row14_ps6",
+ "kb_row15_ps7";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Multiplexed and therefore disabled */
+ owr {
+ nvidia,pins = "owr";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis HDMI1 */
+ hdmi-cec-pee3 {
+ nvidia,pins = "hdmi_cec_pee3";
+ nvidia,function = "cec";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ hdmi-int-pn7 {
+ nvidia,pins = "hdmi_int_pn7";
+ nvidia,function = "hdmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C1 */
+ gen1-i2c-scl-pc4 {
+ nvidia,pins = "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C2 (DDC) */
+ ddc-scl-pv4 {
+ nvidia,pins = "ddc_scl_pv4",
+ "ddc_sda_pv5";
+ nvidia,function = "i2c4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C3 (CAM) */
+ cam-i2c-scl-pbb1 {
nvidia,pins = "cam_i2c_scl_pbb1",
"cam_i2c_sda_pbb2";
nvidia,function = "i2c3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
- nvidia,lock = <TEGRA_PIN_DISABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
+ /* Apalis LCD1 */
+ lcd-d0-pe0 {
+ nvidia,pins = "lcd_d0_pe0",
+ "lcd_d1_pe1",
+ "lcd_d2_pe2",
+ "lcd_d3_pe3",
+ "lcd_d4_pe4",
+ "lcd_d5_pe5",
+ "lcd_d6_pe6",
+ "lcd_d7_pe7",
+ "lcd_d8_pf0",
+ "lcd_d9_pf1",
+ "lcd_d10_pf2",
+ "lcd_d11_pf3",
+ "lcd_d12_pf4",
+ "lcd_d13_pf5",
+ "lcd_d14_pf6",
+ "lcd_d15_pf7",
+ "lcd_d16_pm0",
+ "lcd_d17_pm1",
+ "lcd_d18_pm2",
+ "lcd_d19_pm3",
+ "lcd_d20_pm4",
+ "lcd_d21_pm5",
+ "lcd_d22_pm6",
+ "lcd_d23_pm7",
+ "lcd_de_pj1",
+ "lcd_hsync_pj3",
+ "lcd_pclk_pb3",
+ "lcd_vsync_pj4";
+ nvidia,function = "displaya";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
/* Apalis MMC1 */
- sdmmc3_clk_pa6 {
- nvidia,pins = "sdmmc3_clk_pa6",
- "sdmmc3_cmd_pa7";
+ sdmmc3-clk-pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- sdmmc3_dat0_pb7 {
- nvidia,pins = "sdmmc3_dat0_pb7",
+ sdmmc3-dat0-pb7 {
+ nvidia,pins = "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
"sdmmc3_dat1_pb6",
"sdmmc3_dat2_pb5",
"sdmmc3_dat3_pb4",
@@ -194,10 +299,81 @@
pv3 {
nvidia,pins = "pv3";
nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis Parallel Camera */
+ cam-mclk-pcc0 {
+ nvidia,pins = "cam_mclk_pcc0";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ vi-vsync-pd6 {
+ nvidia,pins = "vi_d0_pt4",
+ "vi_d1_pd5",
+ "vi_d2_pl0",
+ "vi_d3_pl1",
+ "vi_d4_pl2",
+ "vi_d5_pl3",
+ "vi_d6_pl4",
+ "vi_d7_pl5",
+ "vi_d8_pl6",
+ "vi_d9_pl7",
+ "vi_d10_pt2",
+ "vi_d11_pt3",
+ "vi_hsync_pd7",
+ "vi_pclk_pt0",
+ "vi_vsync_pd6";
+ nvidia,function = "vi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
+ /* Multiplexed and therefore disabled */
+ kb-col2-pq2 {
+ nvidia,pins = "kb_col2_pq2",
+ "kb_col3_pq3",
+ "kb_col4_pq4",
+ "kb_row4_pr4";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-row0-pr0 {
+ nvidia,pins = "kb_row0_pr0",
+ "kb_row1_pr1",
+ "kb_row2_pr2",
+ "kb_row3_pr3";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-row5-pr5 {
+ nvidia,pins = "kb_row5_pr5",
+ "kb_row6_pr6",
+ "kb_row7_pr7";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /*
+ * VI level-shifter direction
+ * (pull-down => default direction input)
+ */
+ vi-mclk-pt1 {
+ nvidia,pins = "vi_mclk_pt1";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
/* Apalis PWM1 */
pu6 {
@@ -232,21 +408,30 @@
};
/* Apalis RESET_MOCI# */
- gmi_rst_n_pi4 {
+ gmi-rst-n-pi4 {
nvidia,pins = "gmi_rst_n_pi4";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /* Apalis SATA1_ACT# */
+ pex-l0-prsnt-n-pdd0 {
+ nvidia,pins = "pex_l0_prsnt_n_pdd0";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
/* Apalis SD1 */
- sdmmc1_clk_pz0 {
+ sdmmc1-clk-pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- sdmmc1_cmd_pz1 {
+ sdmmc1-cmd-pz1 {
nvidia,pins = "sdmmc1_cmd_pz1",
"sdmmc1_dat0_py7",
"sdmmc1_dat1_py6",
@@ -257,16 +442,26 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
/* Apalis SD1_CD# */
- clk2_req_pcc5 {
+ clk2-req-pcc5 {
nvidia,pins = "clk2_req_pcc5";
nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis SPDIF1 */
+ spdif-out-pk5 {
+ nvidia,pins = "spdif_out_pk5",
+ "spdif_in_pk6";
+ nvidia,function = "spdif";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
/* Apalis SPI1 */
- spi1_sck_px5 {
+ spi1-sck-px5 {
nvidia,pins = "spi1_sck_px5",
"spi1_mosi_px4",
"spi1_miso_px7",
@@ -277,7 +472,7 @@
};
/* Apalis SPI2 */
- lcd_sck_pz4 {
+ lcd-sck-pz4 {
nvidia,pins = "lcd_sck_pz4",
"lcd_sdout_pn5",
"lcd_sdin_pz2",
@@ -287,8 +482,30 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /*
+ * Apalis TS (Low-speed type specific)
+ * pins may be used as GPIOs
+ */
+ kb-col5-pq5 {
+ nvidia,pins = "kb_col5_pq5";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb-col6-pq6 {
+ nvidia,pins = "kb_col6_pq6",
+ "kb_col7_pq7",
+ "kb_row8_ps0",
+ "kb_row9_ps1";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
/* Apalis UART1 */
- ulpi_data0 {
+ ulpi-data0 {
nvidia,pins = "ulpi_data0_po1",
"ulpi_data1_po2",
"ulpi_data2_po3",
@@ -303,7 +520,7 @@
};
/* Apalis UART2 */
- ulpi_clk_py0 {
+ ulpi-clk-py0 {
nvidia,pins = "ulpi_clk_py0",
"ulpi_dir_py1",
"ulpi_nxt_py2",
@@ -314,7 +531,7 @@
};
/* Apalis UART3 */
- uart2_rxd_pc3 {
+ uart2-rxd-pc3 {
nvidia,pins = "uart2_rxd_pc3",
"uart2_txd_pc2";
nvidia,function = "uartb";
@@ -323,7 +540,7 @@
};
/* Apalis UART4 */
- uart3_rxd_pw7 {
+ uart3-rxd-pw7 {
nvidia,pins = "uart3_rxd_pw7",
"uart3_txd_pw6";
nvidia,function = "uartc";
@@ -331,8 +548,26 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /* Apalis USBH_EN */
+ pex-l0-rst-n-pdd1 {
+ nvidia,pins = "pex_l0_rst_n_pdd1";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBH_OC# */
+ pex-l0-clkreq-n-pdd2 {
+ nvidia,pins = "pex_l0_clkreq_n_pdd2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
/* Apalis USBO1_EN */
- gen2_i2c_scl_pt5 {
+ gen2-i2c-scl-pt5 {
nvidia,pins = "gen2_i2c_scl_pt5";
nvidia,function = "rsvd4";
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
@@ -341,7 +576,7 @@
};
/* Apalis USBO1_OC# */
- gen2_i2c_sda_pt6 {
+ gen2-i2c-sda-pt6 {
nvidia,pins = "gen2_i2c_sda_pt6";
nvidia,function = "rsvd4";
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
@@ -350,6 +585,16 @@
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
+ /* Apalis VGA1 not supported and therefore disabled */
+ crt-hsync-pv6 {
+ nvidia,pins = "crt_hsync_pv6",
+ "crt_vsync_pv7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
/* Apalis WAKE1_MICO */
pv1 {
nvidia,pins = "pv1";
@@ -360,14 +605,16 @@
};
/* eMMC (On-module) */
- sdmmc4_clk_pcc4 {
+ sdmmc4-clk-pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_cmd_pt7",
"sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat0_paa0 {
+ sdmmc4-dat0-paa0 {
nvidia,pins = "sdmmc4_dat0_paa0",
"sdmmc4_dat1_paa1",
"sdmmc4_dat2_paa2",
@@ -379,6 +626,34 @@
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* LAN i210/i211 DEV_OFF_N, PE_RST_N (On-module) */
+ pex-l2-prsnt-n-pdd7 {
+ nvidia,pins = "pex_l2_prsnt_n_pdd7",
+ "pex_l2_rst_n_pcc6";
+ nvidia,function = "pcie";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* LAN i210/i211 PE_WAKE_N, SDP3 (On-module) */
+ pex-wake-n-pdd3 {
+ nvidia,pins = "pex_wake_n_pdd3",
+ "pex_l2_clkreq_n_pcc7";
+ nvidia,function = "pcie";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* LAN i210/i211 SMB_ALERT_N (On-module) */
+ sys-clk-req-pz5 {
+ nvidia,pins = "sys_clk_req_pz5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
/* LVDS Transceiver Configuration */
@@ -391,7 +666,6 @@
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
- nvidia,lock = <TEGRA_PIN_DISABLE>;
};
pbb3 {
nvidia,pins = "pbb3",
@@ -402,18 +676,121 @@
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
- nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Not connected and therefore disabled */
+ clk-32k-out-pa0 {
+ nvidia,pins = "clk3_out_pee0",
+ "clk3_req_pee1",
+ "clk_32k_out_pa0",
+ "dap4_din_pp5",
+ "dap4_dout_pp6",
+ "dap4_fs_pp4",
+ "dap4_sclk_pp7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap2-fs-pa2 {
+ nvidia,pins = "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5",
+ "lcd_dc0_pn6",
+ "lcd_m1_pw1",
+ "lcd_pwr1_pc1",
+ "pex_l1_clkreq_n_pdd6",
+ "pex_l1_prsnt_n_pdd4",
+ "pex_l1_rst_n_pdd5";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-ad0-pg0 {
+ nvidia,pins = "gmi_ad0_pg0",
+ "gmi_ad2_pg2",
+ "gmi_ad3_pg3",
+ "gmi_ad4_pg4",
+ "gmi_ad5_pg5",
+ "gmi_ad6_pg6",
+ "gmi_ad7_pg7",
+ "gmi_ad8_ph0",
+ "gmi_ad9_ph1",
+ "gmi_ad10_ph2",
+ "gmi_ad11_ph3",
+ "gmi_ad12_ph4",
+ "gmi_ad13_ph5",
+ "gmi_ad14_ph6",
+ "gmi_ad15_ph7",
+ "gmi_adv_n_pk0",
+ "gmi_clk_pk1",
+ "gmi_cs4_n_pk2",
+ "gmi_cs2_n_pk3",
+ "gmi_dqs_pi2",
+ "gmi_iordy_pi5",
+ "gmi_oe_n_pi1",
+ "gmi_wait_pi7",
+ "gmi_wr_n_pi0",
+ "lcd_cs1_n_pw0",
+ "pu0",
+ "pu1",
+ "pu2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs0-n-pj0 {
+ nvidia,pins = "gmi_cs0_n_pj0",
+ "gmi_cs1_n_pj2",
+ "gmi_cs3_n_pk4";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs6-n-pi3 {
+ nvidia,pins = "gmi_cs6_n_pi3";
+ nvidia,function = "sata";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs7-n-pi6 {
+ nvidia,pins = "gmi_cs7_n_pi6";
+ nvidia,function = "gmi_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ lcd-pwr0-pb2 {
+ nvidia,pins = "lcd_pwr0_pb2",
+ "lcd_pwr2_pc6",
+ "lcd_wr_n_pz3";
+ nvidia,function = "hdcp";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ uart2-cts-n-pj5 {
+ nvidia,pins = "uart2_cts_n_pj5",
+ "uart2_rts_n_pj6";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* Power I2C (On-module) */
- pwr_i2c_scl_pz6 {
+ pwr-i2c-scl-pz6 {
nvidia,pins = "pwr_i2c_scl_pz6",
"pwr_i2c_sda_pz7";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
- nvidia,lock = <TEGRA_PIN_DISABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
@@ -422,15 +799,15 @@
* temperature sensor therefore requires disabling for
* now
*/
- lcd_dc1_pd2 {
+ lcd-dc1-pd2 {
nvidia,pins = "lcd_dc1_pd2";
nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- /* TOUCH_PEN_INT# */
+ /* TOUCH_PEN_INT# (On-module) */
pv0 {
nvidia,pins = "pv0";
nvidia,function = "rsvd1";
@@ -441,7 +818,19 @@
};
};
- hdmiddc: i2c@7000c700 {
+ serial@70006040 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ serial@70006200 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ hdmi_ddc: i2c@7000c700 {
clock-frequency = <10000>;
};
@@ -457,12 +846,13 @@
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- VDDA-supply = <&sys_3v3_reg>;
- VDDIO-supply = <&sys_3v3_reg>;
+ VDDA-supply = <&reg_module_3v3_audio>;
+ VDDD-supply = <&reg_1v8_vio>;
+ VDDIO-supply = <&reg_module_3v3>;
clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
};
- pmic: tps65911@2d {
+ pmic: pmic@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
@@ -475,43 +865,38 @@
#gpio-cells = <2>;
gpio-controller;
- vcc1-supply = <&sys_3v3_reg>;
- vcc2-supply = <&sys_3v3_reg>;
- vcc3-supply = <&vio_reg>;
- vcc4-supply = <&sys_3v3_reg>;
- vcc5-supply = <&sys_3v3_reg>;
- vcc6-supply = <&vio_reg>;
- vcc7-supply = <&charge_pump_5v0_reg>;
- vccio-supply = <&sys_3v3_reg>;
+ vcc1-supply = <&reg_module_3v3>;
+ vcc2-supply = <&reg_module_3v3>;
+ vcc3-supply = <&reg_1v8_vio>;
+ vcc4-supply = <&reg_module_3v3>;
+ vcc5-supply = <&reg_module_3v3>;
+ vcc6-supply = <&reg_1v8_vio>;
+ vcc7-supply = <&reg_5v0_charge_pump>;
+ vccio-supply = <&reg_module_3v3>;
regulators {
- /* SW1: +V1.35_VDDIO_DDR */
vdd1_reg: vdd1 {
- regulator-name = "vddio_ddr_1v35";
+ regulator-name = "+V1.35_VDDIO_DDR";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
- /* SW2: +V1.05 */
vdd2_reg: vdd2 {
- regulator-name =
- "vdd_pexa,vdd_pexb,vdd_sata";
+ regulator-name = "+V1.05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
- /* SW CTRL: +V1.0_VDD_CPU */
vddctrl_reg: vddctrl {
- regulator-name = "vdd_cpu,vdd_sys";
+ regulator-name = "+V1.0_VDD_CPU";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
};
- /* SWIO: +V1.8 */
- vio_reg: vio {
- regulator-name = "vdd_1v8_gen";
+ reg_1v8_vio: vio {
+ regulator-name = "+V1.8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
@@ -521,27 +906,24 @@
/*
* EN_+V3.3 switching via FET:
- * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
- * see also v3_3 fixed supply
+ * +V3.3_AUDIO_AVDD_S, +V3.3
+ * see also +V3.3 fixed supply
*/
ldo2_reg: ldo2 {
- regulator-name = "en_3v3";
+ regulator-name = "EN_+V3.3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- /* +V1.2_CSI */
ldo3_reg: ldo3 {
- regulator-name =
- "avdd_dsi_csi,pwrdet_mipi";
+ regulator-name = "+V1.2_CSI";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- /* +V1.2_VDD_RTC */
ldo4_reg: ldo4 {
- regulator-name = "vdd_rtc";
+ regulator-name = "+V1.2_VDD_RTC";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
@@ -549,10 +931,10 @@
/*
* +V2.8_AVDD_VDAC:
- * only required for analog RGB
+ * only required for (unsupported) analog RGB
*/
ldo5_reg: ldo5 {
- regulator-name = "avdd_vdac";
+ regulator-name = "+V2.8_AVDD_VDAC";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
@@ -564,22 +946,20 @@
* granularity
*/
ldo6_reg: ldo6 {
- regulator-name = "avdd_plle";
+ regulator-name = "+V1.05_AVDD_PLLE";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
- /* +V1.2_AVDD_PLL */
ldo7_reg: ldo7 {
- regulator-name = "avdd_pll";
+ regulator-name = "+V1.2_AVDD_PLL";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- /* +V1.0_VDD_DDR_HS */
ldo8_reg: ldo8 {
- regulator-name = "vdd_ddr_hs";
+ regulator-name = "+V1.0_VDD_DDR_HS";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
@@ -588,11 +968,10 @@
};
/* STMPE811 touch screen controller */
- stmpe811@41 {
+ touchscreen@41 {
compatible = "st,stmpe811";
reg = <0x41>;
- interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
- interrupt-parent = <&gpio>;
+ irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
id = <0>;
blocks = <0x5>;
@@ -626,7 +1005,7 @@
/*
* LM95245 temperature sensor
- * Note: OVERT_N directly connected to PMIC PWRDN
+ * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
*/
temp-sensor@4c {
compatible = "national,lm95245";
@@ -634,7 +1013,7 @@
};
/* SW: +V1.2_VDD_CORE */
- tps62362@60 {
+ regulator@60 {
compatible = "ti,tps62362";
reg = <0x60>;
@@ -659,7 +1038,7 @@
reg = <1>;
clocks = <&clk16m>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_RISING>;
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
spi-max-frequency = <10000000>;
};
};
@@ -674,7 +1053,7 @@
reg = <0>;
clocks = <&clk16m>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>;
+ interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>;
spi-max-frequency = <10000000>;
};
};
@@ -688,6 +1067,18 @@
nvidia,core-pwr-off-time = <0>;
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
+
+ /* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <4>;
+ nvidia,bus-addr = <0x2d>;
+ nvidia,reg-addr = <0x3f>;
+ nvidia,reg-data = <0x1>;
+ };
+ };
+
+ hda@70030000 {
+ status = "okay";
};
ahub@70080000 {
@@ -701,73 +1092,65 @@
status = "okay";
bus-width = <8>;
non-removable;
+ vmmc-supply = <&reg_module_3v3>; /* VCC */
+ vqmmc-supply = <&reg_1v8_vio>; /* VCCQ */
+ mmc-ddr-1_8v;
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ clk32k_in: xtal1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
- clk32k_in: clk@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ clk16m: osc4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ };
- clk16m: clk@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <16000000>;
- clock-output-names = "clk16m";
- };
+ reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+ compatible = "regulator-fixed";
+ regulator-name = "+V1.8_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&reg_1v8_vio>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- avdd_hdmi_pll_1v8_reg: regulator@100 {
- compatible = "regulator-fixed";
- reg = <100>;
- regulator-name = "+V1.8_AVDD_HDMI_PLL";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <&vio_reg>;
- };
+ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&reg_module_3v3>;
+ };
- sys_3v3_reg: regulator@101 {
- compatible = "regulator-fixed";
- reg = <101>;
- regulator-name = "3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_5v0_charge_pump: regulator-5v0-charge-pump {
+ compatible = "regulator-fixed";
+ regulator-name = "+V5.0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- avdd_hdmi_3v3_reg: regulator@102 {
- compatible = "regulator-fixed";
- reg = <102>;
- regulator-name = "+V3.3_AVDD_HDMI";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <&sys_3v3_reg>;
- };
+ reg_module_3v3: regulator-module-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- charge_pump_5v0_reg: regulator@103 {
- compatible = "regulator-fixed";
- reg = <103>;
- regulator-name = "5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ reg_module_3v3_audio: regulator-module-3v3-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AUDIO_AVDD_S";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
sound {
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 16e1f387aa6d..5965150ecdd2 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -1,15 +1,17 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "tegra30-colibri.dtsi"
/ {
model = "Toradex Colibri T30 on Colibri Evaluation Board";
- compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30";
+ compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30",
+ "nvidia,tegra30";
aliases {
rtc0 = "/i2c@7000c000/rtc@68";
- rtc1 = "/i2c@7000d000/tps65911@2d";
+ rtc1 = "/i2c@7000d000/pmic@2d";
rtc2 = "/rtc@7000e000";
serial0 = &uarta;
serial1 = &uartb;
@@ -27,22 +29,25 @@
nvidia,panel = <&panel>;
};
};
+
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <&reg_5v0>;
};
};
+ /* Colibri UART-A */
serial@70006000 {
status = "okay";
};
+ /* Colibri UART-C */
serial@70006040 {
- compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
+ /* Colibri UART-B */
serial@70006300 {
- compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
@@ -65,8 +70,12 @@
};
};
+ /* GEN2_I2C: unused */
+
+ /* CAM_I2C (I2C3): unused */
+
/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
- hdmiddc: i2c@7000c700 {
+ i2c@7000c700 {
status = "okay";
};
@@ -74,18 +83,17 @@
spi@7000d400 {
status = "okay";
spi-max-frequency = <25000000>;
- can0: can@0 {
+
+ can@0 {
compatible = "microchip,mcp2515";
reg = <0>;
clocks = <&clk16m>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_RISING>;
+ /* CAN_INT */
+ interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_FALLING>;
spi-max-frequency = <10000000>;
- };
- spidev0: spi@1 {
- compatible = "spidev";
- reg = <1>;
- spi-max-frequency = <25000000>;
+ vdd-supply = <&reg_3v3>;
+ xceiver-supply = <&reg_5v0>;
};
};
@@ -93,19 +101,19 @@
sdhci@78000200 {
status = "okay";
bus-width = <4>;
- cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
no-1-8-v;
};
/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
usb@7d000000 {
status = "okay";
+ dr_mode = "otg";
};
usb-phy@7d000000 {
status = "okay";
- dr_mode = "otg";
- vbus-supply = <&usbc_vbus_reg>;
+ vbus-supply = <&reg_usbc_vbus>;
};
/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
@@ -115,28 +123,23 @@
usb-phy@7d008000 {
status = "okay";
- vbus-supply = <&usbh_vbus_reg>;
+ vbus-supply = <&reg_usbh_vbus>;
};
backlight: backlight {
compatible = "pwm-backlight";
-
- /* PWM<A> */
- pwms = <&pwm 0 5000000>;
brightness-levels = <255 128 64 32 16 8 4 0>;
default-brightness-level = <6>;
/* BL_ON */
enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <&reg_3v3>;
+ pwms = <&pwm 0 5000000>; /* PWM<A> */
};
- clocks {
- clk16m: clk@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <16000000>;
- clock-output-names = "clk16m";
- };
+ clk16m: osc3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
};
gpio-keys {
@@ -157,58 +160,39 @@
* edt,et070080dh6: EDT 7.0" LCD TFT
*/
compatible = "edt,et057090dhu", "simple-panel";
-
backlight = <&backlight>;
+ power-supply = <&reg_3v3>;
};
- pwmleds {
- compatible = "pwm-leds";
-
- pwmb {
- label = "PWM<B>";
- pwms = <&pwm 1 19600>;
- max-brightness = <255>;
- };
- pwmc {
- label = "PWM<C>";
- pwms = <&pwm 2 19600>;
- max-brightness = <255>;
- };
- pwmd {
- label = "PWM<D>";
- pwms = <&pwm 3 19600>;
- max-brightness = <255>;
- };
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
};
- regulators {
- sys_5v0_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
- usbc_vbus_reg: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "usbc_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&sys_5v0_reg>;
- };
+ reg_usbc_vbus: regulator-usbc-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB5";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&reg_5v0>;
+ };
- /* USBH_PEN */
- usbh_vbus_reg: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "usbh_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
- vin-supply = <&sys_5v0_reg>;
- };
+ /* USBH_PEN resp. USB_P_EN */
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB[1-4]";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ vin-supply = <&reg_5v0>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 526ed71cf7a3..35af03ca9e90 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -1,27 +1,22 @@
// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/input/input.h>
#include "tegra30.dtsi"
/*
* Toradex Colibri T30 Module Device Tree
- * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E; IT: V1.1A
+ * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E, V1.1F; IT: V1.1A, V1.1B
*/
/ {
- model = "Toradex Colibri T30";
- compatible = "toradex,colibri_t30", "nvidia,tegra30";
-
memory@80000000 {
reg = <0x80000000 0x40000000>;
};
host1x@50000000 {
hdmi@54280000 {
- vdd-supply = <&avdd_hdmi_3v3_reg>;
- pll-supply = <&avdd_hdmi_pll_1v8_reg>;
-
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
- nvidia,ddc-i2c-bus = <&hdmiddc>;
+ pll-supply = <&reg_1v8_avdd_hdmi_pll>;
+ vdd-supply = <&reg_3v3_avdd_hdmi>;
};
};
@@ -31,23 +26,173 @@
state_default: pinmux {
/* Analogue Audio (On-module) */
- clk1_out_pw4 {
+ clk1-out-pw4 {
nvidia,pins = "clk1_out_pw4";
nvidia,function = "extperiph1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_fs_pp0 {
- nvidia,pins = "dap3_fs_pp0",
- "dap3_sclk_pp3",
- "dap3_din_pp1",
- "dap3_dout_pp2";
+ dap3-fs-pp0 {
+ nvidia,pins = "dap3_fs_pp0",
+ "dap3_sclk_pp3",
+ "dap3_din_pp1",
+ "dap3_dout_pp2";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /* Colibri Address/Data Bus (GMI) */
+ gmi-ad0-pg0 {
+ nvidia,pins = "gmi_ad0_pg0",
+ "gmi_ad2_pg2",
+ "gmi_ad3_pg3",
+ "gmi_ad4_pg4",
+ "gmi_ad5_pg5",
+ "gmi_ad6_pg6",
+ "gmi_ad7_pg7",
+ "gmi_ad8_ph0",
+ "gmi_ad9_ph1",
+ "gmi_ad10_ph2",
+ "gmi_ad11_ph3",
+ "gmi_ad12_ph4",
+ "gmi_ad13_ph5",
+ "gmi_ad14_ph6",
+ "gmi_ad15_ph7",
+ "gmi_adv_n_pk0",
+ "gmi_clk_pk1",
+ "gmi_cs4_n_pk2",
+ "gmi_cs2_n_pk3",
+ "gmi_iordy_pi5",
+ "gmi_oe_n_pi1",
+ "gmi_wait_pi7",
+ "gmi_wr_n_pi0",
+ "dap1_fs_pn0",
+ "dap1_din_pn1",
+ "dap1_dout_pn2",
+ "dap1_sclk_pn3",
+ "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5",
+ "spi1_sck_px5",
+ "spi1_mosi_px4",
+ "spi1_cs0_n_px6",
+ "spi2_cs0_n_px3",
+ "spi2_miso_px1",
+ "spi2_mosi_px0",
+ "spi2_sck_px2",
+ "uart2_cts_n_pj5",
+ "uart2_rts_n_pj6";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Further pins may be used as GPIOs */
+ dap4-din-pp5 {
+ nvidia,pins = "dap4_din_pp5",
+ "dap4_dout_pp6",
+ "dap4_fs_pp4",
+ "dap4_sclk_pp7",
+ "pbb7",
+ "sdmmc1_clk_pz0",
+ "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat3_py4",
+ "uart3_cts_n_pa1",
+ "uart3_txd_pw6",
+ "uart3_rxd_pw7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd-d18-pm2 {
+ nvidia,pins = "lcd_d18_pm2",
+ "lcd_d19_pm3",
+ "lcd_d20_pm4",
+ "lcd_d21_pm5",
+ "lcd_d22_pm6",
+ "lcd_d23_pm7",
+ "lcd_dc0_pn6",
+ "pex_l2_clkreq_n_pcc7";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd-cs0-n-pn4 {
+ nvidia,pins = "lcd_cs0_n_pn4",
+ "lcd_sdin_pz2",
+ "pu0",
+ "pu1",
+ "pu2",
+ "pu3",
+ "pu4",
+ "pu5",
+ "pu6",
+ "spi1_miso_px7",
+ "uart3_rts_n_pc0";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd-pwr0-pb2 {
+ nvidia,pins = "lcd_pwr0_pb2",
+ "lcd_sck_pz4",
+ "lcd_sdout_pn5",
+ "lcd_wr_n_pz3";
+ nvidia,function = "hdcp";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pbb4 {
+ nvidia,pins = "pbb4",
+ "pbb5",
+ "pbb6";
+ nvidia,function = "displayb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Multiplexed RDnWR and therefore disabled */
+ lcd-cs1-n-pw0 {
+ nvidia,pins = "lcd_cs1_n_pw0";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* Multiplexed GMI_CLK and therefore disabled */
+ owr {
+ nvidia,pins = "owr";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* Tri-stating GMI_WR_N on nPWE SODIMM pin 99 */
+ sdmmc3-dat4-pd1 {
+ nvidia,pins = "sdmmc3_dat4_pd1";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* Not tri-stating GMI_WR_N on RDnWR SODIMM pin 93 */
+ sdmmc3-dat5-pd0 {
+ nvidia,pins = "sdmmc3_dat5_pd0";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
/* Colibri BL_ON */
pv2 {
nvidia,pins = "pv2";
@@ -57,7 +202,7 @@
};
/* Colibri Backlight PWM<A> */
- sdmmc3_dat3_pb4 {
+ sdmmc3-dat3-pb4 {
nvidia,pins = "sdmmc3_dat3_pb4";
nvidia,function = "pwm0";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -65,7 +210,7 @@
};
/* Colibri CAN_INT */
- kb_row8_ps0 {
+ kb-row8-ps0 {
nvidia,pins = "kb_row8_ps0";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -73,26 +218,133 @@
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
+ /* Colibri DDC */
+ ddc-scl-pv4 {
+ nvidia,pins = "ddc_scl_pv4",
+ "ddc_sda_pv5";
+ nvidia,function = "i2c4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri EXT_IO* */
+ gen2-i2c-scl-pt5 {
+ nvidia,pins = "gen2_i2c_scl_pt5",
+ "gen2_i2c_sda_pt6";
+ nvidia,function = "rsvd4";
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ spdif-in-pk6 {
+ nvidia,pins = "spdif_in_pk6";
+ nvidia,function = "hda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri GPIO */
+ clk2-out-pw5 {
+ nvidia,pins = "clk2_out_pw5",
+ "pcc2",
+ "pv3",
+ "sdmmc1_dat2_py5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd-pwr1-pc1 {
+ nvidia,pins = "lcd_pwr1_pc1",
+ "pex_l1_clkreq_n_pdd6",
+ "pex_l1_rst_n_pdd5";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pv1 {
+ nvidia,pins = "pv1",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri HOTPLUG_DETECT (HDMI) */
+ hdmi-int-pn7 {
+ nvidia,pins = "hdmi_int_pn7";
+ nvidia,function = "hdmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri I2C */
+ gen1-i2c-scl-pc4 {
+ nvidia,pins = "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri LCD (L_* resp. LDD<*>) */
+ lcd-d0-pe0 {
+ nvidia,pins = "lcd_d0_pe0",
+ "lcd_d1_pe1",
+ "lcd_d2_pe2",
+ "lcd_d3_pe3",
+ "lcd_d4_pe4",
+ "lcd_d5_pe5",
+ "lcd_d6_pe6",
+ "lcd_d7_pe7",
+ "lcd_d8_pf0",
+ "lcd_d9_pf1",
+ "lcd_d10_pf2",
+ "lcd_d11_pf3",
+ "lcd_d12_pf4",
+ "lcd_d13_pf5",
+ "lcd_d14_pf6",
+ "lcd_d15_pf7",
+ "lcd_d16_pm0",
+ "lcd_d17_pm1",
+ "lcd_de_pj1",
+ "lcd_hsync_pj3",
+ "lcd_pclk_pb3",
+ "lcd_vsync_pj4";
+ nvidia,function = "displaya";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
/*
* Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
- * todays display need DE, disable LCD_M1
+ * today's display need DE, disable LCD_M1
*/
- lcd_m1_pw1 {
+ lcd-m1-pw1 {
nvidia,pins = "lcd_m1_pw1";
nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* Colibri MMC */
- kb_row10_ps2 {
+ kb-row10-ps2 {
nvidia,pins = "kb_row10_ps2";
nvidia,function = "sdmmc2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- kb_row11_ps3 {
+ kb-row11-ps3 {
nvidia,pins = "kb_row11_ps3",
"kb_row12_ps4",
"kb_row13_ps5",
@@ -102,9 +354,108 @@
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /* Colibri MMC_CD */
+ gmi-wp-n-pc7 {
+ nvidia,pins = "gmi_wp_n_pc7";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Multiplexed and therefore disabled */
+ cam-mclk-pcc0 {
+ nvidia,pins = "cam_mclk_pcc0";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ cam-i2c-scl-pbb1 {
+ nvidia,pins = "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ pbb0 {
+ nvidia,pins = "pbb0",
+ "pcc1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pbb3 {
+ nvidia,pins = "pbb3";
+ nvidia,function = "displayb";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri nRESET_OUT */
+ gmi-rst-n-pi4 {
+ nvidia,pins = "gmi_rst_n_pi4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /*
+ * Colibri Parallel Camera (Optional)
+ * pins multiplexed with others and therefore disabled
+ */
+ vi-vsync-pd6 {
+ nvidia,pins = "vi_d0_pt4",
+ "vi_d1_pd5",
+ "vi_d2_pl0",
+ "vi_d3_pl1",
+ "vi_d4_pl2",
+ "vi_d5_pl3",
+ "vi_d6_pl4",
+ "vi_d7_pl5",
+ "vi_d8_pl6",
+ "vi_d9_pl7",
+ "vi_d10_pt2",
+ "vi_d11_pt3",
+ "vi_hsync_pd7",
+ "vi_mclk_pt1",
+ "vi_pclk_pt0",
+ "vi_vsync_pd6";
+ nvidia,function = "vi";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri PWM<B> */
+ sdmmc3-dat2-pb5 {
+ nvidia,pins = "sdmmc3_dat2_pb5";
+ nvidia,function = "pwm1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri PWM<C> */
+ sdmmc3-clk-pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6";
+ nvidia,function = "pwm2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri PWM<D> */
+ sdmmc3-cmd-pa7 {
+ nvidia,pins = "sdmmc3_cmd_pa7";
+ nvidia,function = "pwm3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
/* Colibri SSP */
- ulpi_clk_py0 {
+ ulpi-clk-py0 {
nvidia,pins = "ulpi_clk_py0",
"ulpi_dir_py1",
"ulpi_nxt_py2",
@@ -113,16 +464,18 @@
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- sdmmc3_dat6_pd3 {
+ /* Multiplexed SSPFRM, SSPTXD and therefore disabled */
+ sdmmc3-dat6-pd3 {
nvidia,pins = "sdmmc3_dat6_pd3",
"sdmmc3_dat7_pd4";
nvidia,function = "spdif";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- /* Colibri UART_A */
- ulpi_data0 {
+ /* Colibri UART-A */
+ ulpi-data0 {
nvidia,pins = "ulpi_data0_po1",
"ulpi_data1_po2",
"ulpi_data2_po3",
@@ -136,8 +489,8 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- /* Colibri UART_B */
- gmi_a16_pj7 {
+ /* Colibri UART-B */
+ gmi-a16-pj7 {
nvidia,pins = "gmi_a16_pj7",
"gmi_a17_pb0",
"gmi_a18_pb1",
@@ -147,8 +500,8 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- /* Colibri UART_C */
- uart2_rxd {
+ /* Colibri UART-C */
+ uart2-rxd {
nvidia,pins = "uart2_rxd_pc3",
"uart2_txd_pc2";
nvidia,function = "uartb";
@@ -156,15 +509,53 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- /* eMMC */
- sdmmc4_clk_pcc4 {
+ /* Colibri USBC_DET */
+ spdif-out-pk5 {
+ nvidia,pins = "spdif_out_pk5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri USBH_PEN */
+ spi2-cs1-n-pw2 {
+ nvidia,pins = "spi2_cs1_n_pw2";
+ nvidia,function = "spi2_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri USBH_OC */
+ spi2-cs2-n-pw3, {
+ nvidia,pins = "spi2_cs2_n_pw3";
+ nvidia,function = "spi2_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri VGA not supported and therefore disabled */
+ crt-hsync-pv6 {
+ nvidia,pins = "crt_hsync_pv6",
+ "crt_vsync_pv7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* eMMC (On-module) */
+ sdmmc4-clk-pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_cmd_pt7",
"sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat0_paa0 {
+ sdmmc4-dat0-paa0 {
nvidia,pins = "sdmmc4_dat0_paa0",
"sdmmc4_dat1_paa1",
"sdmmc4_dat2_paa2",
@@ -176,17 +567,111 @@
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* LAN_EXT_WAKEUP#, LAN_PME (On-module) */
+ pex-l0-rst-n-pdd1 {
+ nvidia,pins = "pex_l0_rst_n_pdd1",
+ "pex_wake_n_pdd3";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* LAN_V_BUS, LAN_RESET# (On-module) */
+ pex-l0-clkreq-n-pdd2 {
+ nvidia,pins = "pex_l0_clkreq_n_pdd2",
+ "pex_l0_prsnt_n_pdd0";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* nBATT_FAULT(SENSE), nVDD_FAULT(SENSE) */
+ pex-l2-rst-n-pcc6 {
+ nvidia,pins = "pex_l2_rst_n_pcc6",
+ "pex_l2_prsnt_n_pdd7";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Not connected and therefore disabled */
+ clk1-req-pee2 {
+ nvidia,pins = "clk1_req_pee2",
+ "pex_l1_prsnt_n_pdd4";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ clk2-req-pcc5 {
+ nvidia,pins = "clk2_req_pcc5",
+ "clk3_out_pee0",
+ "clk3_req_pee1",
+ "clk_32k_out_pa0",
+ "hdmi_cec_pee3",
+ "sys_clk_req_pz5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-dqs-pi2 {
+ nvidia,pins = "gmi_dqs_pi2",
+ "kb_col2_pq2",
+ "kb_col3_pq3",
+ "kb_col4_pq4",
+ "kb_col5_pq5",
+ "kb_row4_pr4";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-col0-pq0 {
+ nvidia,pins = "kb_col0_pq0",
+ "kb_col1_pq1",
+ "kb_col6_pq6",
+ "kb_col7_pq7",
+ "kb_row5_pr5",
+ "kb_row6_pr6",
+ "kb_row7_pr7",
+ "kb_row9_ps1";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-row0-pr0 {
+ nvidia,pins = "kb_row0_pr0",
+ "kb_row1_pr1",
+ "kb_row2_pr2",
+ "kb_row3_pr3";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ lcd-pwr2-pc6 {
+ nvidia,pins = "lcd_pwr2_pc6";
+ nvidia,function = "hdcp";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* Power I2C (On-module) */
- pwr_i2c_scl_pz6 {
+ pwr-i2c-scl-pz6 {
nvidia,pins = "pwr_i2c_scl_pz6",
"pwr_i2c_sda_pz7";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
- nvidia,lock = <TEGRA_PIN_DISABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
@@ -195,15 +680,15 @@
* temperature sensor therefore requires disabling for
* now
*/
- lcd_dc1_pd2 {
+ lcd-dc1-pd2 {
nvidia,pins = "lcd_dc1_pd2";
nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- /* TOUCH_PEN_INT# */
+ /* TOUCH_PEN_INT# (On-module) */
pv0 {
nvidia,pins = "pv0";
nvidia,function = "rsvd1";
@@ -214,13 +699,21 @@
};
};
- hdmiddc: i2c@7000c700 {
+ serial@70006040 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ hdmi_ddc: i2c@7000c700 {
clock-frequency = <10000>;
};
/*
* PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
- * touch screen controller
+ * touch screen controller (On-module)
*/
i2c@7000d000 {
status = "okay";
@@ -230,12 +723,13 @@
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- VDDA-supply = <&sys_3v3_reg>;
- VDDIO-supply = <&sys_3v3_reg>;
+ VDDA-supply = <&reg_module_3v3_audio>;
+ VDDD-supply = <&reg_1v8_vio>;
+ VDDIO-supply = <&reg_module_3v3>;
clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
};
- pmic: tps65911@2d {
+ pmic: pmic@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
@@ -248,19 +742,18 @@
#gpio-cells = <2>;
gpio-controller;
- vcc1-supply = <&sys_3v3_reg>;
- vcc2-supply = <&sys_3v3_reg>;
- vcc3-supply = <&vio_reg>;
- vcc4-supply = <&sys_3v3_reg>;
- vcc5-supply = <&sys_3v3_reg>;
- vcc6-supply = <&vio_reg>;
- vcc7-supply = <&charge_pump_5v0_reg>;
- vccio-supply = <&sys_3v3_reg>;
+ vcc1-supply = <&reg_module_3v3>;
+ vcc2-supply = <&reg_module_3v3>;
+ vcc3-supply = <&reg_1v8_vio>;
+ vcc4-supply = <&reg_module_3v3>;
+ vcc5-supply = <&reg_module_3v3>;
+ vcc6-supply = <&reg_1v8_vio>;
+ vcc7-supply = <&reg_5v0_charge_pump>;
+ vccio-supply = <&reg_module_3v3>;
regulators {
- /* SW1: +V1.35_VDDIO_DDR */
vdd1_reg: vdd1 {
- regulator-name = "vddio_ddr_1v35";
+ regulator-name = "+V1.35_VDDIO_DDR";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
@@ -268,17 +761,15 @@
/* SW2: unused */
- /* SW CTRL: +V1.0_VDD_CPU */
vddctrl_reg: vddctrl {
- regulator-name = "vdd_cpu,vdd_sys";
+ regulator-name = "+V1.0_VDD_CPU";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
};
- /* SWIO: +V1.8 */
- vio_reg: vio {
- regulator-name = "vdd_1v8_gen";
+ reg_1v8_vio: vio {
+ regulator-name = "+V1.8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
@@ -289,10 +780,10 @@
/*
* EN_+V3.3 switching via FET:
* +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
- * see also 3v3 fixed supply
+ * see also +V3.3 fixed supply
*/
ldo2_reg: ldo2 {
- regulator-name = "en_3v3";
+ regulator-name = "EN_+V3.3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
@@ -300,9 +791,8 @@
/* LDO3: unused */
- /* +V1.2_VDD_RTC */
ldo4_reg: ldo4 {
- regulator-name = "vdd_rtc";
+ regulator-name = "+V1.2_VDD_RTC";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
@@ -310,10 +800,10 @@
/*
* +V2.8_AVDD_VDAC:
- * only required for analog RGB
+ * only required for (unsupported) analog RGB
*/
ldo5_reg: ldo5 {
- regulator-name = "avdd_vdac";
+ regulator-name = "+V2.8_AVDD_VDAC";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
@@ -325,22 +815,20 @@
* granularity
*/
ldo6_reg: ldo6 {
- regulator-name = "avdd_plle";
+ regulator-name = "+V1.05_AVDD_PLLE";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
- /* +V1.2_AVDD_PLL */
ldo7_reg: ldo7 {
- regulator-name = "avdd_pll";
+ regulator-name = "+V1.2_AVDD_PLL";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- /* +V1.0_VDD_DDR_HS */
ldo8_reg: ldo8 {
- regulator-name = "vdd_ddr_hs";
+ regulator-name = "+V1.0_VDD_DDR_HS";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
@@ -349,11 +837,10 @@
};
/* STMPE811 touch screen controller */
- stmpe811@41 {
+ touchscreen@41 {
compatible = "st,stmpe811";
reg = <0x41>;
- interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
- interrupt-parent = <&gpio>;
+ irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
id = <0>;
blocks = <0x5>;
@@ -387,7 +874,7 @@
/*
* LM95245 temperature sensor
- * Note: OVERT_N directly connected to PMIC PWRDN
+ * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
*/
temp-sensor@4c {
compatible = "national,lm95245";
@@ -395,7 +882,7 @@
};
/* SW: +V1.2_VDD_CORE */
- tps62362@60 {
+ regulator@60 {
compatible = "ti,tps62362";
reg = <0x60>;
@@ -419,6 +906,18 @@
nvidia,core-pwr-off-time = <0>;
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
+
+ /* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <4>;
+ nvidia,bus-addr = <0x2d>;
+ nvidia,reg-addr = <0x3f>;
+ nvidia,reg-data = <0x1>;
+ };
+ };
+
+ hda@70030000 {
+ status = "okay";
};
ahub@70080000 {
@@ -432,75 +931,85 @@
status = "okay";
bus-width = <8>;
non-removable;
+ vmmc-supply = <&reg_module_3v3>; /* VCC */
+ vqmmc-supply = <&reg_1v8_vio>; /* VCCQ */
+ mmc-ddr-1_8v;
};
- /* EHCI instance 1: USB2_DP/N -> AX88772B */
+ /* EHCI instance 1: USB2_DP/N -> AX88772B (On-module) */
usb@7d004000 {
status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ asix@1 {
+ reg = <1>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
};
usb-phy@7d004000 {
status = "okay";
- nvidia,is-wired = <1>;
+ vbus-supply = <&reg_lan_v_bus>;
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ clk32k_in: xtal1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
- clk32k_in: clk@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+ compatible = "regulator-fixed";
+ regulator-name = "+V1.8_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&reg_1v8_vio>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&reg_module_3v3>;
+ };
- avdd_hdmi_pll_1v8_reg: regulator@100 {
- compatible = "regulator-fixed";
- reg = <100>;
- regulator-name = "+V1.8_AVDD_HDMI_PLL";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <&vio_reg>;
- };
+ reg_5v0_charge_pump: regulator-5v0-charge-pump {
+ compatible = "regulator-fixed";
+ regulator-name = "+V5.0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- sys_3v3_reg: regulator@101 {
- compatible = "regulator-fixed";
- reg = <101>;
- regulator-name = "3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_lan_v_bus: regulator-lan-v-bus {
+ compatible = "regulator-fixed";
+ regulator-name = "LAN_V_BUS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+ };
- avdd_hdmi_3v3_reg: regulator@102 {
- compatible = "regulator-fixed";
- reg = <102>;
- regulator-name = "+V3.3_AVDD_HDMI";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <&sys_3v3_reg>;
- };
+ reg_module_3v3: regulator-module-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- charge_pump_5v0_reg: regulator@103 {
- compatible = "regulator-fixed";
- reg = <103>;
- regulator-name = "5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ reg_module_3v3_audio: regulator-module-3v3-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AUDIO_AVDD_S";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
sound {
@@ -519,3 +1028,12 @@
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
+
+&gpio {
+ lan-reset-n {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "LAN_RESET#";
+ };
+};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index a6781f653310..d2b553f76719 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -896,7 +896,7 @@
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <51>;
- nvidia.xcvr-setup-use-fuses;
+ nvidia,xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <1>;
nvidia,xcvr-lsrslew = <1>;
nvidia,xcvr-hsslew = <32>;
@@ -933,7 +933,7 @@
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <51>;
- nvidia.xcvr-setup-use-fuses;
+ nvidia,xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
nvidia,xcvr-hsslew = <32>;
@@ -969,7 +969,7 @@
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <51>;
- nvidia.xcvr-setup-use-fuses;
+ nvidia,xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
nvidia,xcvr-hsslew = <32>;
@@ -1013,5 +1013,9 @@
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&{/cpus/cpu@0}>,
+ <&{/cpus/cpu@1}>,
+ <&{/cpus/cpu@2}>,
+ <&{/cpus/cpu@3}>;
};
};
diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts
index 21407e159bf7..3aaca10f6644 100644
--- a/arch/arm/boot/dts/uniphier-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts
@@ -63,6 +63,10 @@
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
&usb0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index 37950ad2de7c..b73d594b6dcd 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -63,6 +63,17 @@
cache-level = <2>;
};
+ spi: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
@@ -224,6 +235,40 @@
};
};
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a400000 0x200>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&mio_clk 0>;
+ reset-names = "host", "bridge";
+ resets = <&mio_rst 0>, <&mio_rst 3>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
+
+ emmc: sdhc@5a500000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a500000 0x200>;
+ interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ clocks = <&mio_clk 1>;
+ reset-names = "host", "bridge", "hw";
+ resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ non-removable;
+ };
+
usb0: usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
@@ -347,7 +392,8 @@
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
index a0a44a422e12..3d9080ee7aef 100644
--- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
@@ -65,6 +65,10 @@
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
&eth {
status = "okay";
phy-handle = <&ethphy>;
@@ -76,6 +80,14 @@
};
};
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
&nand {
status = "okay";
};
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
index 51f0e69f49fd..1fee5ffbfb9c 100644
--- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -121,11 +121,36 @@
function = "sd";
};
+ pinctrl_sd_uhs: sd-uhs {
+ groups = "sd";
+ function = "sd";
+ };
+
pinctrl_sd1: sd1 {
groups = "sd1";
function = "sd1";
};
+ pinctrl_spi0: spi0 {
+ groups = "spi0";
+ function = "spi0";
+ };
+
+ pinctrl_spi1: spi1 {
+ groups = "spi1";
+ function = "spi1";
+ };
+
+ pinctrl_spi2: spi2 {
+ groups = "spi2";
+ function = "spi2";
+ };
+
+ pinctrl_spi3: spi3 {
+ groups = "spi3";
+ function = "spi3";
+ };
+
pinctrl_system_bus: system-bus {
groups = "system_bus", "system_bus_cs1";
function = "system_bus";
diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts
index db1b08935ae5..92cc48dd86d0 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ace.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts
@@ -68,6 +68,10 @@
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
&usb2 {
status = "okay";
};
@@ -86,3 +90,11 @@
reg = <1>;
};
};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts
index efb084983b82..28038b17bbb3 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts
@@ -65,6 +65,10 @@
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
&usb2 {
status = "okay";
};
@@ -84,6 +88,14 @@
};
};
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
&nand {
status = "okay";
};
diff --git a/arch/arm/boot/dts/uniphier-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
index dac4d6679a32..dda1a2f214a8 100644
--- a/arch/arm/boot/dts/uniphier-pro4-sanji.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
@@ -71,6 +71,10 @@
status = "okay";
};
+&emmc {
+ status = "okay";
+};
+
&eth {
status = "okay";
phy-handle = <&ethphy>;
@@ -81,3 +85,11 @@
reg = <1>;
};
};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index 49539f035219..0beb606cf3c8 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -71,6 +71,17 @@
cache-level = <2>;
};
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
@@ -258,6 +269,54 @@
};
};
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a400000 0x200>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&mio_clk 0>;
+ reset-names = "host", "bridge";
+ resets = <&mio_rst 0>, <&mio_rst 3>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
+
+ emmc: sdhc@5a500000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a500000 0x200>;
+ interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ clocks = <&mio_clk 1>;
+ reset-names = "host", "bridge", "hw";
+ resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ non-removable;
+ };
+
+ sd1: sdhc@5a600000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a600000 0x200>;
+ interrupts = <0 85 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1>;
+ clocks = <&mio_clk 2>;
+ reset-names = "host", "bridge";
+ resets = <&mio_rst 2>, <&mio_rst 5>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ };
+
usb2: usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
@@ -269,6 +328,8 @@
<&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
+ phy-names = "usb";
+ phys = <&usb_phy0>;
has-transaction-translator;
};
@@ -283,6 +344,8 @@
<&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
+ phy-names = "usb";
+ phys = <&usb_phy1>;
has-transaction-translator;
};
@@ -294,6 +357,34 @@
pinctrl: pinctrl {
compatible = "socionext,uniphier-pro4-pinctrl";
};
+
+ usb-phy {
+ compatible = "socionext,uniphier-pro4-usb2-phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_phy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <0>;
+ vbus-supply = <&usb0_vbus>;
+ };
+
+ usb_phy3: phy@3 {
+ reg = <3>;
+ #phy-cells = <0>;
+ vbus-supply = <&usb1_vbus>;
+ };
+ };
};
soc-glue@5f900000 {
@@ -386,6 +477,101 @@
};
};
+ usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 134 4>, <0 135 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb0_rst 4>;
+ phys = <&usb_phy2>, <&usb0_ssphy>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-pro4-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x100>;
+
+ usb0_vbus: regulator@0 {
+ compatible = "socionext,uniphier-pro4-usb3-regulator";
+ reg = <0 0x10>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ };
+
+ usb0_ssphy: ss-phy@10 {
+ compatible = "socionext,uniphier-pro4-usb3-ssphy";
+ reg = <0x10 0x10>;
+ #phy-cells = <0>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ vbus-supply = <&usb0_vbus>;
+ };
+
+ usb0_rst: reset@40 {
+ compatible = "socionext,uniphier-pro4-usb3-reset";
+ reg = <0x40 0x4>;
+ #reset-cells = <1>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ };
+ };
+
+ usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65c00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 137 4>, <0 138 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb1_rst 4>;
+ phys = <&usb_phy3>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65d00000 {
+ compatible = "socionext,uniphier-pro4-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65d00000 0x100>;
+
+ usb1_vbus: regulator@0 {
+ compatible = "socionext,uniphier-pro4-usb3-regulator";
+ reg = <0 0x10>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ };
+
+ usb1_rst: reset@40 {
+ compatible = "socionext,uniphier-pro4-usb3-reset";
+ reg = <0x40 0x4>;
+ #reset-cells = <1>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ };
+ };
+
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5a";
status = "disabled";
@@ -394,7 +580,8 @@
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index 06c2cef91ec7..365738739412 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -156,6 +156,28 @@
cache-level = <3>;
};
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
@@ -439,9 +461,44 @@
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
+
+ emmc: sdhc@68400000 {
+ compatible = "socionext,uniphier-sd-v3.1";
+ status = "disabled";
+ reg = <0x68400000 0x800>;
+ interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ clocks = <&sd_clk 1>;
+ reset-names = "host", "hw";
+ resets = <&sd_rst 1>, <&sd_rst 6>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ non-removable;
+ };
+
+ sd: sdhc@68800000 {
+ compatible = "socionext,uniphier-sd-v3.1";
+ status = "disabled";
+ reg = <0x68800000 0x800>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&sd_clk 0>;
+ reset-names = "host";
+ resets = <&sd_rst 0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
};
};
diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
index bed26b8ed9a3..e27fd4f2a569 100644
--- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
@@ -76,6 +76,10 @@
};
};
+&emmc {
+ status = "okay";
+};
+
&eth {
status = "okay";
phy-handle = <&ethphy>;
@@ -86,3 +90,11 @@
reg = <1>;
};
};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
index b13d2d16ddad..23fe42b7408b 100644
--- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
@@ -77,6 +77,10 @@
status = "okay";
};
+&emmc {
+ status = "okay";
+};
+
&eth {
status = "okay";
phy-handle = <&ethphy>;
@@ -87,3 +91,7 @@
reg = <1>;
};
};
+
+&usb0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index e2d1a22c5950..8d20e9548e39 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -167,6 +167,28 @@
cache-level = <2>;
};
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
@@ -422,6 +444,40 @@
};
};
+ emmc: sdhc@5a000000 {
+ compatible = "socionext,uniphier-sd-v3.1.1";
+ status = "disabled";
+ reg = <0x5a000000 0x800>;
+ interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ clocks = <&sd_clk 1>;
+ reset-names = "host", "hw";
+ resets = <&sd_rst 1>, <&sd_rst 6>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ non-removable;
+ };
+
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v3.1.1";
+ status = "disabled";
+ reg = <0x5a400000 0x800>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&sd_clk 0>;
+ reset-names = "host";
+ resets = <&sd_rst 0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
+
soc_glue: soc-glue@5f800000 {
compatible = "socionext,uniphier-pxs2-soc-glue",
"simple-mfd", "syscon";
@@ -523,6 +579,186 @@
};
};
+ usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 134 4>, <0 135 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+ resets = <&usb0_rst 15>;
+ phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+ <&usb0_ssphy0>, <&usb0_ssphy1>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-pxs2-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb0_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs2-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb0_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs2-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb0_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs2-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb0_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus0>;
+ };
+
+ usb0_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus1>;
+ };
+
+ usb0_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 17>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 17>;
+ vbus-supply = <&usb0_vbus0>;
+ };
+
+ usb0_ssphy1: ss-phy@310 {
+ compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+ reg = <0x310 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 18>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 18>;
+ vbus-supply = <&usb0_vbus1>;
+ };
+ };
+
+ usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65c00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 137 4>, <0 138 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 15>, <&sys_clk 15>, <&sys_clk 15>;
+ resets = <&usb1_rst 15>;
+ phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65d00000 {
+ compatible = "socionext,uniphier-pxs2-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65d00000 0x400>;
+
+ usb1_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs2-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 15>;
+ reset-names = "link";
+ resets = <&sys_rst 15>;
+ };
+
+ usb1_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs2-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 15>;
+ reset-names = "link";
+ resets = <&sys_rst 15>;
+ };
+
+ usb1_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs2-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 15>;
+ reset-names = "link";
+ resets = <&sys_rst 15>;
+ };
+
+ usb1_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 15>, <&sys_clk 20>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 15>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus0>;
+ };
+
+ usb1_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 15>, <&sys_clk 20>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 15>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus1>;
+ };
+
+ usb1_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 15>, <&sys_clk 21>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 15>, <&sys_rst 21>;
+ vbus-supply = <&usb1_vbus0>;
+ };
+ };
+
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled";
@@ -531,7 +767,8 @@
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts
index fe386fa2ea4b..01bf94c6b93a 100644
--- a/arch/arm/boot/dts/uniphier-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts
@@ -63,6 +63,10 @@
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
&usb0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index e9b9b4f3c558..f7fcf6b45995 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -63,6 +63,17 @@
cache-level = <2>;
};
+ spi: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
@@ -228,6 +239,40 @@
};
};
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a400000 0x200>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&mio_clk 0>;
+ reset-names = "host", "bridge";
+ resets = <&mio_rst 0>, <&mio_rst 3>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
+
+ emmc: sdhc@5a500000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a500000 0x200>;
+ interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ clocks = <&mio_clk 1>;
+ reset-names = "host", "bridge", "hw";
+ resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ non-removable;
+ };
+
usb0: usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
@@ -351,7 +396,8 @@
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 5f61d3609027..6f4f60ba5429 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -373,7 +373,7 @@
clock-names = "apb_pclk";
};
- ssp@101f4000 {
+ spi@101f4000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x101f4000 0x1000>;
interrupts = <11>;
diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi
index bbff0115e2fb..76a0949df4a8 100644
--- a/arch/arm/boot/dts/vf500.dtsi
+++ b/arch/arm/boot/dts/vf500.dtsi
@@ -1,43 +1,6 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
#include "vfxxx.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index 6be7a828ae64..59fceea8805d 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -1,43 +1,6 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
/dts-v1/;
#include "vf610.dtsi"
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts
index 37777cf22e67..b76c3d0413df 100644
--- a/arch/arm/boot/dts/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
@@ -66,6 +66,15 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
+ sff: sfp {
+ compatible = "sff,sff";
+ pinctrl-0 = <&pinctrl_optical>;
+ pinctrl-names = "default";
+ i2c-bus = <&i2c0>;
+ los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ };
};
&adc0 {
@@ -113,6 +122,8 @@
non-removable;
no-1-8-v;
keep-power-in-suspend;
+ no-sdio;
+ no-sd;
status = "okay";
};
@@ -120,6 +131,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
+ no-sdio;
status = "okay";
};
@@ -170,6 +182,14 @@
label = "eth_cu_1000_3";
};
+ port@5 {
+ reg = <5>;
+ label = "eth_fc_1000_1";
+ phy-mode = "1000base-x";
+ managed = "in-band-status";
+ sfp = <&sff>;
+ };
+
port@6 {
reg = <6>;
label = "cpu";
@@ -289,6 +309,16 @@
>;
};
+ pinctrl_optical: optical-grp {
+ fsl,pins = <
+ /* SFF SD input */
+ VF610_PAD_PTE27__GPIO_132 0x3061
+
+ /* SFF Transmit disable output */
+ VF610_PAD_PTE13__GPIO_118 0x3043
+ >;
+ };
+
pinctrl_switch: switch-grp {
fsl,pins = <
VF610_PAD_PTB28__GPIO_98 0x3061
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index 0b1e94c6f25b..6f4a5602cefd 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -200,6 +200,13 @@
phy-handle = <&switch1phy4>;
};
+ port@9 {
+ reg = <9>;
+ label = "sff2";
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ sfp = <&sff2>;
+ };
switch1port10: port@10 {
reg = <10>;
@@ -245,6 +252,22 @@
#size-cells = <0>;
};
};
+
+ sff2: sff2 {
+ /* lower */
+ compatible = "sff,sff";
+ i2c-bus = <&sff2_i2c>;
+ los-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff3: sff3 {
+ /* upper */
+ compatible = "sff,sff";
+ i2c-bus = <&sff3_i2c>;
+ los-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ };
};
&dspi0 {
@@ -329,13 +352,6 @@
interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
gpio-controller;
interrupt-controller;
-
- enet_swr_en {
- gpio-hog;
- gpios = <0 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "enet-swr-en";
- };
};
/*
@@ -378,26 +394,16 @@
reg = <0>;
};
- i2c@1 {
+ sff2_i2c: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
-
- sfp2: at24c04@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- };
};
- i2c@2 {
+ sff3_i2c: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
-
- sfp3: at24c04@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- };
};
i2c@3 {
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 80fef182c672..7fd39817f8ab 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -1,43 +1,7 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
#include "vf500.dtsi"
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index d392794d9c13..028e0ec30e0c 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -1,43 +1,6 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
#include "vf610-pinfunc.h"
#include <dt-bindings/clock/vf610-clock.h>
@@ -190,7 +153,7 @@
status = "disabled";
};
- dspi0: dspi0@4002c000 {
+ dspi0: spi@4002c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
@@ -205,7 +168,7 @@
status = "disabled";
};
- dspi1: dspi1@4002d000 {
+ dspi1: spi@4002d000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
@@ -339,7 +302,7 @@
status = "disabled";
};
- qspi0: quadspi@40044000 {
+ qspi0: spi@40044000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-qspi";
@@ -569,7 +532,7 @@
status = "disabled";
};
- dspi2: dspi2@400ac000 {
+ dspi2: spi@400ac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
@@ -584,7 +547,7 @@
status = "disabled";
};
- dspi3: dspi3@400ad000 {
+ dspi3: spi@400ad000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
@@ -665,7 +628,7 @@
status = "disabled";
};
- qspi1: quadspi@400c4000 {
+ qspi1: spi@400c4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-qspi";
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index cc5a3dc2b4a0..27cd6cb52f1b 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -174,17 +174,17 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
- hwmon@52 {
+ hwmon@34 {
compatible = "ti,ucd9248";
- reg = <52>;
+ reg = <0x34>;
};
- hwmon@53 {
+ hwmon@35 {
compatible = "ti,ucd9248";
- reg = <53>;
+ reg = <0x35>;
};
- hwmon@54 {
+ hwmon@36 {
compatible = "ti,ucd9248";
- reg = <54>;
+ reg = <0x36>;
};
};
};
diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts
index 0e1bfdd3421f..0dd352289a45 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts
@@ -68,7 +68,7 @@
status = "okay";
num-cs = <4>;
is-decoded-cs = <0>;
- flash@0 {
+ flash@1 {
compatible = "sst25wf080", "jedec,spi-nor";
reg = <1>;
spi-max-frequency = <1000000>;
diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts
index 651913f1afa2..4ae2c85df3a0 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts
@@ -62,7 +62,7 @@
status = "okay";
num-cs = <4>;
is-decoded-cs = <0>;
- eeprom: eeprom@0 {
+ eeprom: eeprom@2 {
at25,byte-len = <8192>;
at25,addr-mode = <2>;
at25,page-size = <32>;
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index dcd21bb95e3b..f96730cce6e8 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -110,6 +110,7 @@ void exynos_firmware_init(void);
#define EXYNOS_SLEEP_MAGIC 0x00000bad
#define EXYNOS_AFTR_MAGIC 0xfcba0d10
+bool __init exynos_secure_firmware_available(void);
void exynos_set_boot_flag(unsigned int cpu, unsigned int mode);
void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode);
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index be1f20fe28f4..d602e3bf3f96 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -185,7 +185,7 @@ static void exynos_l2_configure(const struct l2x0_regs *regs)
exynos_smc(SMC_CMD_L2X0SETUP2, regs->pwr_ctrl, regs->aux_ctrl, 0);
}
-void __init exynos_firmware_init(void)
+bool __init exynos_secure_firmware_available(void)
{
struct device_node *nd;
const __be32 *addr;
@@ -193,14 +193,22 @@ void __init exynos_firmware_init(void)
nd = of_find_compatible_node(NULL, NULL,
"samsung,secure-firmware");
if (!nd)
- return;
+ return false;
addr = of_get_address(nd, 0, NULL, NULL);
if (!addr) {
pr_err("%s: No address specified.\n", __func__);
- return;
+ return false;
}
+ return true;
+}
+
+void __init exynos_firmware_init(void)
+{
+ if (!exynos_secure_firmware_available())
+ return;
+
pr_info("Running under secure firmware.\n");
register_firmware_ops(&exynos_firmware_ops);
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 7ead3acd6fa4..bb8e3985acdb 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -59,10 +59,15 @@ struct exynos_pm_data {
int (*cpu_suspend)(unsigned long);
};
-static const struct exynos_pm_data *pm_data __ro_after_init;
+/* Used only on Exynos542x/5800 */
+struct exynos_pm_state {
+ int cpu_state;
+ unsigned int pmu_spare3;
+ void __iomem *sysram_base;
+};
-static int exynos5420_cpu_state;
-static unsigned int exynos_pmu_spare3;
+static const struct exynos_pm_data *pm_data __ro_after_init;
+static struct exynos_pm_state pm_state;
/*
* GIC wake-up support
@@ -257,7 +262,7 @@ static int exynos5420_cpu_suspend(unsigned long arg)
unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
- writel_relaxed(0x0, sysram_base_addr + EXYNOS5420_CPU_STATE);
+ writel_relaxed(0x0, pm_state.sysram_base + EXYNOS5420_CPU_STATE);
if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) {
mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
@@ -321,7 +326,7 @@ static void exynos5420_pm_prepare(void)
/* Set wake-up mask registers */
exynos_pm_set_wakeup_mask();
- exynos_pmu_spare3 = pmu_raw_readl(S5P_PMU_SPARE3);
+ pm_state.pmu_spare3 = pmu_raw_readl(S5P_PMU_SPARE3);
/*
* The cpu state needs to be saved and restored so that the
* secondary CPUs will enter low power start. Though the U-Boot
@@ -329,8 +334,8 @@ static void exynos5420_pm_prepare(void)
* needs to restore it back in case, the primary cpu fails to
* suspend for any reason.
*/
- exynos5420_cpu_state = readl_relaxed(sysram_base_addr +
- EXYNOS5420_CPU_STATE);
+ pm_state.cpu_state = readl_relaxed(pm_state.sysram_base +
+ EXYNOS5420_CPU_STATE);
exynos_pm_enter_sleep_mode();
@@ -448,8 +453,8 @@ static void exynos5420_pm_resume(void)
EXYNOS5_ARM_CORE0_SYS_PWR_REG);
/* Restore the sysram cpu state register */
- writel_relaxed(exynos5420_cpu_state,
- sysram_base_addr + EXYNOS5420_CPU_STATE);
+ writel_relaxed(pm_state.cpu_state,
+ pm_state.sysram_base + EXYNOS5420_CPU_STATE);
pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL,
S5P_CENTRAL_SEQ_OPTION);
@@ -457,7 +462,7 @@ static void exynos5420_pm_resume(void)
if (exynos_pm_central_resume())
goto early_wakeup;
- pmu_raw_writel(exynos_pmu_spare3, S5P_PMU_SPARE3);
+ pmu_raw_writel(pm_state.pmu_spare3, S5P_PMU_SPARE3);
early_wakeup:
@@ -654,4 +659,13 @@ void __init exynos_pm_init(void)
register_syscore_ops(&exynos_pm_syscore_ops);
suspend_set_ops(&exynos_suspend_ops);
+
+ /*
+ * Applicable as of now only to Exynos542x. If booted under secure
+ * firmware, the non-secure region of sysram should be used.
+ */
+ if (exynos_secure_firmware_available())
+ pm_state.sysram_base = sysram_ns_base_addr;
+ else
+ pm_state.sysram_base = sysram_base_addr;
}
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 9d5595c4ad99..594901f3b8e5 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -219,17 +219,6 @@ static void gta02_udc_vbus_draw(unsigned int ma)
#define gta02_udc_vbus_draw NULL
#endif
-/*
- * This is called when pc50633 is probed, unfortunately quite late in the
- * day since it is an I2C bus device. Here we can belatedly define some
- * platform devices with the advantage that we can mark the pcf50633 as the
- * parent. This makes them get suspended and resumed with their parent
- * the pcf50633 still around.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
-
-
static char *gta02_batteries[] = {
"battery",
};
@@ -355,7 +344,6 @@ static struct pcf50633_platform_data gta02_pcf_pdata = {
},
},
- .probe_done = gta02_pmu_attach_child_devices,
.mbc_event_callback = gta02_pmu_event_callback,
};
@@ -512,36 +500,6 @@ static struct platform_device *gta02_devices[] __initdata = {
&s3c_device_ts,
};
-/* These guys DO need to be children of PMU. */
-
-static struct platform_device *gta02_devices_pmu_children[] = {
-};
-
-
-/*
- * This is called when pc50633 is probed, quite late in the day since it is an
- * I2C bus device. Here we can define platform devices with the advantage that
- * we can mark the pcf50633 as the parent. This makes them get suspended and
- * resumed with their parent the pcf50633 still around. All devices whose
- * operation depends on something from pcf50633 must have this relationship
- * made explicit like this, or suspend and resume will become an unreliable
- * hellworld.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
-{
- int n;
-
- /* Grab a copy of the now probed PMU pointer. */
- gta02_pcf = pcf;
-
- for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
- gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
-
- platform_add_devices(gta02_devices_pmu_children,
- ARRAY_SIZE(gta02_devices_pmu_children));
-}
-
static void gta02_poweroff(void)
{
pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index f9fc1f8d2b28..50d67d760efd 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -64,31 +64,31 @@ static struct map_desc mini2440_iodesc[] __initdata = {
};
#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
[0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
},
[1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
},
[2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
},
};
@@ -104,8 +104,8 @@ static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
/*
* This macro simplifies the table bellow
*/
-#define _LCD_DECLARE(_clock,_xres,margin_left,margin_right,hsync, \
- _yres,margin_top,margin_bottom,vsync, refresh) \
+#define _LCD_DECLARE(_clock, _xres, margin_left, margin_right, hsync, \
+ _yres, margin_top, margin_bottom, vsync, refresh) \
.width = _xres, \
.xres = _xres, \
.height = _yres, \
@@ -128,7 +128,7 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
[0] = { /* mini2440 + 3.5" TFT + touchscreen */
_LCD_DECLARE(
7, /* The 3.5 is quite fast */
- 240, 21, 38, 6, /* x timing */
+ 240, 21, 38, 6, /* x timing */
320, 4, 4, 2, /* y timing */
60), /* refresh rate */
.lcdcon5 = (S3C2410_LCDCON5_FRM565 |
@@ -140,7 +140,7 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
[1] = { /* mini2440 + 7" TFT + touchscreen */
_LCD_DECLARE(
10, /* the 7" runs slower */
- 800, 40, 40, 48, /* x timing */
+ 800, 40, 40, 48, /* x timing */
480, 29, 3, 3, /* y timing */
50), /* refresh rate */
.lcdcon5 = (S3C2410_LCDCON5_FRM565 |
@@ -148,7 +148,7 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
S3C2410_LCDCON5_INVVFRAME |
S3C2410_LCDCON5_PWREN),
},
- /* The VGA shield can outout at several resolutions. All share
+ /* The VGA shield can outout at several resolutions. All share
* the same timings, however, anything smaller than 1024x768
* will only be displayed in the top left corner of a 1024x768
* XGA output unless you add optional dip switches to the shield.
@@ -158,9 +158,10 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
_LCD_DECLARE(
10,
1024, 1, 2, 2, /* y timing */
- 768, 200, 16, 16, /* x timing */
+ 768, 200, 16, 16, /* x timing */
24), /* refresh rate, maximum stable,
- tested with the FPGA shield */
+ * tested with the FPGA shield
+ */
.lcdcon5 = (S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_HWSWP),
},
@@ -196,7 +197,8 @@ static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
/* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
* and disable the pull down resistors on pins we are using for LCD
- * data. */
+ * data.
+ */
.gpcup = (0xf << 1) | (0x3f << 10),
@@ -232,10 +234,11 @@ static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
/* MMC/SD */
static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
- .gpio_detect = S3C2410_GPG(8),
- .gpio_wprotect = S3C2410_GPH(8),
- .set_power = NULL,
- .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_detect = S3C2410_GPG(8),
+ .gpio_wprotect = S3C2410_GPH(8),
+ .wprotect_invert = 1,
+ .set_power = NULL,
+ .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
};
/* NAND Flash on MINI2440 board */
@@ -254,7 +257,8 @@ static struct mtd_partition mini2440_default_nand_part[] __initdata = {
[2] = {
.name = "kernel",
/* 5 megabytes, for a kernel with no modules
- * or a uImage with a ramdisk attached */
+ * or a uImage with a ramdisk attached
+ */
.size = 0x00500000,
.offset = SZ_256K + SZ_128K,
},
@@ -271,7 +275,7 @@ static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(mini2440_default_nand_part),
.partitions = mini2440_default_nand_part,
- .flash_bbt = 1, /* we use u-boot to create a BBT */
+ .flash_bbt = 1, /* we use u-boot to create a BBT */
},
};
@@ -282,7 +286,7 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
.nr_sets = ARRAY_SIZE(mini2440_nand_sets),
.sets = mini2440_nand_sets,
.ignore_unset_ecc = 1,
- .ecc_mode = NAND_ECC_HW,
+ .ecc_mode = NAND_ECC_HW,
};
/* DM9000AEP 10/100 ethernet controller */
@@ -290,7 +294,7 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
static struct resource mini2440_dm9k_resource[] = {
[0] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE, 4),
[1] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE + 4, 4),
- [2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \
+ [2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHEDGE),
};
@@ -362,7 +366,8 @@ static struct gpio_keys_button mini2440_buttons[] = {
},
#if 0
/* this pin is also known as TCLK1 and seems to already
- * marked as "in use" somehow in the kernel -- possibly wrongly */
+ * marked as "in use" somehow in the kernel -- possibly wrongly
+ */
{
.gpio = S3C2410_GPG(11), /* K6 */
.code = KEY_F6,
@@ -564,7 +569,8 @@ static char mini2440_features_str[12] __initdata = "0tb";
static int __init mini2440_features_setup(char *str)
{
if (str)
- strlcpy(mini2440_features_str, str, sizeof(mini2440_features_str));
+ strlcpy(mini2440_features_str, str,
+ sizeof(mini2440_features_str));
return 1;
}
@@ -583,10 +589,10 @@ struct mini2440_features_t {
};
static void __init mini2440_parse_features(
- struct mini2440_features_t * features,
- const char * features_str )
+ struct mini2440_features_t *features,
+ const char *features_str)
{
- const char * fp = features_str;
+ const char *fp = features_str;
features->count = 0;
features->done = 0;
@@ -598,13 +604,14 @@ static void __init mini2440_parse_features(
switch (f) {
case '0'...'9': /* tft screen */
if (features->done & FEATURE_SCREEN) {
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "screen type already set\n", f);
+ pr_info("MINI2440: '%c' ignored, screen type already set\n",
+ f);
} else {
int li = f - '0';
+
if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
- printk(KERN_INFO "MINI2440: "
- "'%c' out of range LCD mode\n", f);
+ pr_info("MINI2440: '%c' out of range LCD mode\n",
+ f);
else {
features->optional[features->count++] =
&s3c_device_lcd;
@@ -615,8 +622,8 @@ static void __init mini2440_parse_features(
break;
case 'b':
if (features->done & FEATURE_BACKLIGHT)
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "backlight already set\n", f);
+ pr_info("MINI2440: '%c' ignored, backlight already set\n",
+ f);
else {
features->optional[features->count++] =
&mini2440_led_backlight;
@@ -624,13 +631,13 @@ static void __init mini2440_parse_features(
features->done |= FEATURE_BACKLIGHT;
break;
case 't':
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "touchscreen not compiled in\n", f);
+ pr_info("MINI2440: '%c' ignored, touchscreen not compiled in\n",
+ f);
break;
case 'c':
if (features->done & FEATURE_CAMERA)
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "camera already registered\n", f);
+ pr_info("MINI2440: '%c' ignored, camera already registered\n",
+ f);
else
features->optional[features->count++] =
&s3c_device_camif;
@@ -645,7 +652,7 @@ static void __init mini2440_init(void)
struct mini2440_features_t features = { 0 };
int i;
- printk(KERN_INFO "MINI2440: Option string mini2440=%s\n",
+ pr_info("MINI2440: Option string mini2440=%s\n",
mini2440_features_str);
/* Parse the feature string */
@@ -674,17 +681,17 @@ static void __init mini2440_init(void)
mini2440_fb_info.displays =
&mini2440_lcd_cfg[features.lcd_index];
- printk(KERN_INFO "MINI2440: LCD");
+ pr_info("MINI2440: LCD");
for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
if (li == features.lcd_index)
- printk(" [%d:%dx%d]", li,
+ pr_cont(" [%d:%dx%d]", li,
mini2440_lcd_cfg[li].width,
mini2440_lcd_cfg[li].height);
else
- printk(" %d:%dx%d", li,
+ pr_cont(" %d:%dx%d", li,
mini2440_lcd_cfg[li].width,
mini2440_lcd_cfg[li].height);
- printk("\n");
+ pr_cont("\n");
s3c24xx_fb_set_platdata(&mini2440_fb_info);
}
diff --git a/arch/arm64/boot/dts/actions/Makefile b/arch/arm64/boot/dts/actions/Makefile
index d8b923480f5a..b57fd2372ecd 100644
--- a/arch/arm64/boot/dts/actions/Makefile
+++ b/arch/arm64/boot/dts/actions/Makefile
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+
dtb-$(CONFIG_ARCH_ACTIONS) += s700-cubieboard7.dtb
dtb-$(CONFIG_ARCH_ACTIONS) += s900-bubblegum-96.dtb
diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
index ef79d7905f44..28f3f4a0f7f0 100644
--- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
+++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
@@ -28,12 +28,6 @@
device_type = "memory";
reg = <0x1 0xe0000000 0x0 0x0>;
};
-
- uart3_clk: uart3-clk {
- compatible = "fixed-clock";
- clock-frequency = <921600>;
- #clock-cells = <0>;
- };
};
&timer {
@@ -42,5 +36,4 @@
&uart3 {
status = "okay";
- clocks = <&uart3_clk>;
};
diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
index 66dd5309f0a2..192c7b39c8c1 100644
--- a/arch/arm64/boot/dts/actions/s700.dtsi
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -3,6 +3,7 @@
* Copyright (c) 2017 Andreas Färber
*/
+#include <dt-bindings/clock/actions,s700-cmu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
@@ -87,6 +88,12 @@
#clock-cells = <0>;
};
+ losc: losc {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -107,6 +114,7 @@
uart0: serial@e0120000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0120000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART0>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -114,6 +122,7 @@
uart1: serial@e0122000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0122000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART1>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -121,6 +130,7 @@
uart2: serial@e0124000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0124000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART2>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -128,6 +138,7 @@
uart3: serial@e0126000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0126000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART3>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -135,6 +146,7 @@
uart4: serial@e0128000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0128000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART4>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -142,6 +154,7 @@
uart5: serial@e012a000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe012a000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART5>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -149,10 +162,18 @@
uart6: serial@e012c000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe012c000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART6>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+ cmu: clock-controller@e0168000 {
+ compatible = "actions,s700-cmu";
+ reg = <0x0 0xe0168000 0x0 0x1000>;
+ clocks = <&hosc>, <&losc>;
+ #clock-cells = <1>;
+ };
+
sps: power-controller@e01b0100 {
compatible = "actions,s700-sps";
reg = <0x0 0xe01b0100 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
index 21ca80f9941c..732daaa6e9d3 100644
--- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
+++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
@@ -24,11 +23,223 @@
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
+};
+
+&i2c0 {
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_default>;
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_default>;
+};
+
+&i2c2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_default>;
+};
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ * NC = not connected (pin out but not routed from the chip to
+ * anything the board)
+ * "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ * LSEC = Low Speed External Connector
+ * HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "Schematics Bubblegum96"
+ * version v1.0
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Boards naming of a line and the schematic name of
+ * the same line are in conflict, the 96Boards specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART2. Only exception is the I2C lines for which the schematic
+ * naming has been preferred. This is only for the informational
+ * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L"
+ * are the only ones actually used for GPIO.
+ */
+
+&pinctrl {
+ gpio-line-names =
+ "GPIO-A", /* GPIO_0, LSEC pin 23 */
+ "GPIO-B", /* GPIO_1, LSEC pin 24 */
+ "GPIO-C", /* GPIO_2, LSEC pin 25 */
+ "GPIO-D", /* GPIO_3, LSEC pin 26 */
+ "GPIO-E", /* GPIO_4, LSEC pin 27 */
+ "GPIO-F", /* GPIO_5, LSEC pin 28 */
+ "GPIO-G", /* GPIO_6, LSEC pin 29 */
+ "GPIO-H", /* GPIO_7, LSEC pin 30 */
+ "GPIO-I", /* GPIO_8, LSEC pin 31 */
+ "GPIO-J", /* GPIO_9, LSEC pin 32 */
+ "NC", /* GPIO_10 */
+ "NC", /* GPIO_11 */
+ "SIRQ2_1V8", /* GPIO_12 */
+ "PCM0_OUT", /* GPIO_13 */
+ "WIFI_LED", /* GPIO_14 */
+ "PCM0_SYNC", /* GPIO_15 */
+ "PCM0_CLK", /* GPIO_16 */
+ "PCM0_IN", /* GPIO_17 */
+ "BT_LED", /* GPIO_18 */
+ "LED0", /* GPIO_19 */
+ "LED1", /* GPIO_20 */
+ "JTAG_TCK", /* GPIO_21 */
+ "JTAG_TMS", /* GPIO_22 */
+ "JTAG_TDI", /* GPIO_23 */
+ "JTAG_TDO", /* GPIO_24 */
+ "[UART1_RxD]", /* GPIO_25, LSEC pin 13 */
+ "NC", /* GPIO_26 */
+ "[UART1_TxD]", /* GPIO_27, LSEC pin 11 */
+ "SD0_D0", /* GPIO_28 */
+ "SD0_D1", /* GPIO_29 */
+ "SD0_D2", /* GPIO_30 */
+ "SD0_D3", /* GPIO_31 */
+ "SD1_D0", /* GPIO_32 */
+ "SD1_D1", /* GPIO_33 */
+ "SD1_D2", /* GPIO_34 */
+ "SD1_D3", /* GPIO_35 */
+ "SD0_CMD", /* GPIO_36 */
+ "SD0_CLK", /* GPIO_37 */
+ "SD1_CMD", /* GPIO_38 */
+ "SD1_CLK", /* GPIO_39 */
+ "SPI0_SCLK", /* GPIO_40, LSEC pin 8 */
+ "SPI0_CS", /* GPIO_41, LSEC pin 12 */
+ "SPI0_DIN", /* GPIO_42, LSEC pin 10 */
+ "SPI0_DOUT", /* GPIO_43, LSEC pin 14 */
+ "I2C5_SDATA", /* GPIO_44, HSEC pin 36 */
+ "I2C5_SCLK", /* GPIO_45, HSEC pin 38 */
+ "UART0_RX", /* GPIO_46, LSEC pin 7 */
+ "UART0_TX", /* GPIO_47, LSEC pin 5 */
+ "UART0_RTSB", /* GPIO_48, LSEC pin 9 */
+ "UART0_CTSB", /* GPIO_49, LSEC pin 3 */
+ "I2C4_SCLK", /* GPIO_50, HSEC pin 32 */
+ "I2C4_SDATA", /* GPIO_51, HSEC pin 34 */
+ "I2C0_SCLK", /* GPIO_52 */
+ "I2C0_SDATA", /* GPIO_53 */
+ "I2C1_SCLK", /* GPIO_54, LSEC pin 15 */
+ "I2C1_SDATA", /* GPIO_55, LSEC pin 17 */
+ "I2C2_SCLK", /* GPIO_56, LSEC pin 19 */
+ "I2C2_SDATA", /* GPIO_57, LSEC pin 21 */
+ "CSI0_DN0", /* GPIO_58, HSEC pin 10 */
+ "CSI0_DP0", /* GPIO_59, HSEC pin 8 */
+ "CSI0_DN1", /* GPIO_60, HSEC pin 16 */
+ "CSI0_DP1", /* GPIO_61, HSEC pin 14 */
+ "CSI0_CN", /* GPIO_62, HSEC pin 4 */
+ "CSI0_CP", /* GPIO_63, HSEC pin 2 */
+ "CSI0_DN2", /* GPIO_64, HSEC pin 22 */
+ "CSI0_DP2", /* GPIO_65, HSEC pin 20 */
+ "CSI0_DN3", /* GPIO_66, HSEC pin 28 */
+ "CSI0_DP3", /* GPIO_67, HSEC pin 26 */
+ "[CLK0]", /* GPIO_68, HSEC pin 15 */
+ "CSI1_DN0", /* GPIO_69, HSEC pin 44 */
+ "CSI1_DP0", /* GPIO_70, HSEC pin 42 */
+ "CSI1_DN1", /* GPIO_71, HSEC pin 50 */
+ "CSI1_DP1", /* GPIO_72, HSEC pin 48 */
+ "CSI1_CN", /* GPIO_73, HSEC pin 56 */
+ "CSI1_CP", /* GPIO_74, HSEC pin 54 */
+ "[CLK1]", /* GPIO_75, HSEC pin 17 */
+ "[GPIOD0]", /* GPIO_76 */
+ "[GPIOD1]", /* GPIO_77 */
+ "BT_RST_N", /* GPIO_78 */
+ "EXT_DC_EN", /* GPIO_79 */
+ "[PCM_DI]", /* GPIO_80, LSEC pin 22 */
+ "[PCM_DO]", /* GPIO_81, LSEC pin 20 */
+ "[PCM_CLK]", /* GPIO_82, LSEC pin 18 */
+ "[PCM_FS]", /* GPIO_83, LSEC pin 16 */
+ "WAKE_BT", /* GPIO_84 */
+ "WL_REG_ON", /* GPIO_85 */
+ "NC", /* GPIO_86 */
+ "NC", /* GPIO_87 */
+ "NC", /* GPIO_88 */
+ "NC", /* GPIO_89 */
+ "NC", /* GPIO_90 */
+ "WIFI_WAKE", /* GPIO_91 */
+ "BT_WAKE", /* GPIO_92 */
+ "NC", /* GPIO_93 */
+ "OTG_EN2", /* GPIO_94 */
+ "OTG_EN", /* GPIO_95 */
+ "DSI_DP3", /* GPIO_96, HSEC pin 45 */
+ "DSI_DN3", /* GPIO_97, HSEC pin 47 */
+ "DSI_DP1", /* GPIO_98, HSEC pin 33 */
+ "DSI_DN1", /* GPIO_99, HSEC pin 35 */
+ "DSI_CP", /* GPIO_100, HSEC pin 21 */
+ "DSI_CN", /* GPIO_101, HSEC pin 23 */
+ "DSI_DP0", /* GPIO_102, HSEC pin 27 */
+ "DSI_DN0", /* GPIO_103, HSEC pin 29 */
+ "DSI_DP2", /* GPIO_104, HSEC pin 39 */
+ "DSI_DN2", /* GPIO_105, HSEC pin 41 */
+ "N0_D0", /* GPIO_106 */
+ "N0_D1", /* GPIO_107 */
+ "N0_D2", /* GPIO_108 */
+ "N0_D3", /* GPIO_109 */
+ "N0_D4", /* GPIO_110 */
+ "N0_D5", /* GPIO_111 */
+ "N0_D6", /* GPIO_112 */
+ "N0_D7", /* GPIO_113 */
+ "N0_DQS", /* GPIO_114 */
+ "N0_DQSN", /* GPIO_115 */
+ "NC", /* GPIO_116 */
+ "NC", /* GPIO_117 */
+ "NC", /* GPIO_118 */
+ "N0_CEB1", /* GPIO_119 */
+ "CARD_DT", /* GPIO_120 */
+ "N0_CEB3", /* GPIO_121 */
+ "SD_DAT0", /* GPIO_122, HSEC pin 1 */
+ "SD_DAT1", /* GPIO_123, HSEC pin 3 */
+ "SD_DAT2", /* GPIO_124, HSEC pin 5 */
+ "SD_DAT3", /* GPIO_125, HSEC pin 7 */
+ "NC", /* GPIO_126 */
+ "NC", /* GPIO_127 */
+ "[PWR_BTN_N]", /* GPIO_128, LSEC pin 4 */
+ "[RST_BTN_N]", /* GPIO_129, LSEC pin 6 */
+ "NC", /* GPIO_130 */
+ "SD_CMD", /* GPIO_131 */
+ "GPIO-L", /* GPIO_132, LSEC pin 34 */
+ "GPIO-K", /* GPIO_133, LSEC pin 33 */
+ "NC", /* GPIO_134 */
+ "SD_SCLK", /* GPIO_135 */
+ "NC", /* GPIO_136 */
+ "JTAG_TRST", /* GPIO_137 */
+ "I2C3_SCLK", /* GPIO_138 */
+ "LED2", /* GPIO_139 */
+ "LED3", /* GPIO_140 */
+ "I2C3_SDATA", /* GPIO_141 */
+ "UART3_RX", /* GPIO_142 */
+ "UART3_TX", /* GPIO_143 */
+ "UART3_RTSB", /* GPIO_144 */
+ "UART3_CTSB"; /* GPIO_145 */
+
+ i2c0_default: i2c0-default {
+ pinmux {
+ groups = "i2c0_mfp";
+ function = "i2c0";
+ };
+ pinconf {
+ pins = "i2c0_sclk", "i2c0_sdata";
+ bias-pull-up;
+ };
+ };
+
+ i2c1_default: i2c1-default {
+ pinconf {
+ pins = "i2c1_sclk", "i2c1_sdata";
+ bias-pull-up;
+ };
+ };
- uart5_clk: uart5-clk {
- compatible = "fixed-clock";
- clock-frequency = <921600>;
- #clock-cells = <0>;
+ i2c2_default: i2c2-default {
+ pinconf {
+ pins = "i2c2_sclk", "i2c2_sdata";
+ bias-pull-up;
+ };
};
};
@@ -38,5 +249,4 @@
&uart5 {
status = "okay";
- clocks = <&uart5_clk>;
};
diff --git a/arch/arm64/boot/dts/actions/s900.dtsi b/arch/arm64/boot/dts/actions/s900.dtsi
index 11406f6d3a6d..491ddccc9038 100644
--- a/arch/arm64/boot/dts/actions/s900.dtsi
+++ b/arch/arm64/boot/dts/actions/s900.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
+#include <dt-bindings/clock/actions,s900-cmu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
@@ -88,6 +88,18 @@
#clock-cells = <0>;
};
+ losc: losc {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+
+ diff24M: diff24M {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -108,6 +120,7 @@
uart0: serial@e0120000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0120000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART0>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -115,6 +128,7 @@
uart1: serial@e0122000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0122000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART1>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -122,6 +136,7 @@
uart2: serial@e0124000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0124000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART2>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -129,6 +144,7 @@
uart3: serial@e0126000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0126000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART3>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -136,6 +152,7 @@
uart4: serial@e0128000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0128000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART4>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -143,6 +160,7 @@
uart5: serial@e012a000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe012a000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART5>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -150,15 +168,111 @@
uart6: serial@e012c000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe012c000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART6>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+ sps: power-controller@e012e000 {
+ compatible = "actions,s900-sps";
+ reg = <0x0 0xe012e000 0x0 0x2000>;
+ #power-domain-cells = <1>;
+ };
+
+ cmu: clock-controller@e0160000 {
+ compatible = "actions,s900-cmu";
+ reg = <0x0 0xe0160000 0x0 0x1000>;
+ clocks = <&hosc>, <&losc>;
+ #clock-cells = <1>;
+ };
+
+ i2c0: i2c@e0170000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0170000 0 0x1000>;
+ clocks = <&cmu CLK_I2C0>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e0172000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0172000 0 0x1000>;
+ clocks = <&cmu CLK_I2C1>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e0174000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0174000 0 0x1000>;
+ clocks = <&cmu CLK_I2C2>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e0176000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0176000 0 0x1000>;
+ clocks = <&cmu CLK_I2C3>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e0178000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0178000 0 0x1000>;
+ clocks = <&cmu CLK_I2C4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e017a000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe017a000 0 0x1000>;
+ clocks = <&cmu CLK_I2C5>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl@e01b0000 {
+ compatible = "actions,s900-pinctrl";
+ reg = <0x0 0xe01b0000 0x0 0x1000>;
+ clocks = <&cmu CLK_GPIO>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 146>;
+ #gpio-cells = <2>;
+ };
+
timer: timer@e0228000 {
compatible = "actions,s900-timer";
reg = <0x0 0xe0228000 0x0 0x8000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "timer1";
};
+
+ dma: dma-controller@e0260000 {
+ compatible = "actions,s900-dma";
+ reg = <0x0 0xe0260000 0x0 0x1000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ dma-channels = <12>;
+ dma-requests = <46>;
+ clocks = <&cmu CLK_DMAC>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 9ffa7a038791..8d4f97f279e0 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -4,10 +4,13 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
@@ -15,4 +18,5 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
index eac4793c8502..6cb2b7f0c817 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
@@ -203,7 +203,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 094cfed13df9..ef1c90401bb2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -60,6 +60,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -86,6 +97,10 @@
};
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -103,6 +118,17 @@
status = "okay";
};
+&hdmi {
+ hvcc-supply = <&reg_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
@@ -151,7 +177,7 @@
&mmc2 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins>;
+ pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
@@ -302,7 +328,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
index 98dbff19f5cc..31884dbc8838 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -51,12 +51,44 @@
compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
aliases {
+ ethernet0 = &emac;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ blue {
+ label = "nanopi-a64:blue:status";
+ gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rtc 1>;
+ clock-names = "ext_clock";
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+ };
+};
+
+&de {
+ status = "okay";
};
&ehci0 {
@@ -67,6 +99,26 @@
status = "okay";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <&reg_dcdc1>;
+ status = "okay";
+};
+
+&hdmi {
+ hvcc-supply = <&reg_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
/* i2c1 connected with gpio headers like pine64, bananapi */
&i2c1 {
pinctrl-names = "default";
@@ -78,6 +130,13 @@
bias-pull-up;
};
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
@@ -88,6 +147,24 @@
status = "okay";
};
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&reg_dcdc1>;
+ vqmmc-supply = <&reg_dldo4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ rtl8189etv: wifi@1 {
+ reg = <1>;
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+ interrupt-names = "host-wake";
+ };
+};
+
&ohci0 {
status = "okay";
};
@@ -125,9 +202,9 @@
&reg_dcdc1 {
regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc-3v";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
@@ -201,7 +278,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 3f531393eaee..f7a4bccaa5d4 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -51,6 +51,7 @@
compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
aliases {
+ ethernet0 = &emac;
serial0 = &uart0;
};
@@ -58,12 +59,74 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */
+ status = "okay";
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
};
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <&reg_dcdc1>;
+ allwinner,tx-delay-ps = <600>;
+ status = "okay";
+};
+
+&hdmi {
+ hvcc-supply = <&reg_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
@@ -92,6 +155,14 @@
};
};
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
@@ -100,6 +171,7 @@
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
};
};
@@ -142,10 +214,14 @@
/* DCDC3 is polyphased with DCDC2 */
+/*
+ * The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal
+ * 1.35V that the PMIC can drive.
+ */
&reg_dcdc5 {
regulator-always-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
+ regulator-min-microvolt = <1360000>;
+ regulator-max-microvolt = <1360000>;
regulator-name = "vcc-ddr3";
};
@@ -180,6 +256,11 @@
regulator-name = "vcc-wifi-io";
};
+&reg_drivevbus {
+ regulator-name = "usb0-vbus";
+ status = "okay";
+};
+
&reg_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -220,6 +301,18 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
status = "okay";
+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ usb0_vbus-supply = <&reg_drivevbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index 1221764f5719..b0c64f75792c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ * Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -51,23 +52,127 @@
compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
aliases {
+ ethernet0 = &emac;
serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
};
chosen {
stdout-path = "serial0:115200n8";
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "orangepi:green:status";
+ gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */
+ status = "okay";
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
+ status = "okay";
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
+ };
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
};
&ehci1 {
status = "okay";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <&reg_gmac_3v3>;
+ status = "okay";
+};
+
+&hdmi {
+ hvcc-supply = <&reg_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&reg_dldo2>;
+ vqmmc-supply = <&reg_dldo4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci0 {
status = "okay";
};
@@ -89,9 +194,8 @@
#include "axp803.dtsi"
&reg_aldo1 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
regulator-name = "afvcc-csi";
};
@@ -163,12 +267,23 @@
regulator-name = "vcc-wifi-io";
};
+&reg_drivevbus {
+ regulator-name = "usb0-vbus";
+ status = "okay";
+};
+
&reg_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "cpvdd";
};
+&reg_eldo3 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dvdd-csi";
+};
+
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
@@ -195,13 +310,61 @@
vcc-hdmi-supply = <&reg_dldo1>;
};
+&spi0 {
+ status = "okay";
+
+ spi-flash@0 {
+ compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+ status = "okay";
+ };
+};
+
+/* On debug connector */
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
-&usbphy {
+/* Bluetooth */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
};
+/* On Pi-2 connector, RTS/CTS optional */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+};
+
+/* On Pi-2 connector, RTS/CTS optional */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "disabled";
+};
+
+/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ usb0_vbus-supply = <&reg_drivevbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
new file mode 100644
index 000000000000..72d6961dc312
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
@@ -0,0 +1,13 @@
+/*
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ *
+ * Copyright (c) 2018 ARM Ltd.
+ */
+
+#include "sun50i-a64-sopine-baseboard.dts"
+
+/ {
+ model = "Pine64 LTS";
+ compatible = "pine64,pine64-lts", "allwinner,sun50i-r18",
+ "allwinner,sun50i-a64";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 1b9b92e541d2..c077b6c1f458 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -62,6 +62,21 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+};
+
+&de {
+ status = "okay";
};
&ehci0 {
@@ -82,6 +97,17 @@
};
+&hdmi {
+ hvcc-supply = <&reg_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
@@ -241,7 +267,7 @@
/* On Exp and Euler connectors */
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 897e60cbe38d..77fac84797e9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -80,8 +80,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
disable-wp;
bus-width = <4>;
status = "okay";
@@ -104,7 +103,7 @@
&mmc2 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins>;
+ pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_eldo1>;
bus-width = <8>;
@@ -143,7 +142,7 @@
&r_i2c {
clock-frequency = <100000>;
pinctrl-names = "default";
- pinctrl-0 = <&r_i2c_pins_a>;
+ pinctrl-0 = <&r_i2c_pl89_pins>;
status = "okay";
};
@@ -270,7 +269,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index c21f2331add6..53fcc9098df3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -61,6 +61,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
reg_vcc1v8: vcc1v8 {
compatible = "regulator-fixed";
regulator-name = "vcc1v8";
@@ -69,6 +80,10 @@
};
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -86,6 +101,17 @@
status = "okay";
};
+&hdmi {
+ hvcc-supply = <&reg_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
@@ -140,7 +166,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index 81f8e0098699..c455b24dd079 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -260,7 +260,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index d3daf90a8715..f3a66f888205 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -88,6 +88,7 @@
device_type = "cpu";
reg = <0>;
enable-method = "psci";
+ next-level-cache = <&L2>;
};
cpu1: cpu@1 {
@@ -95,6 +96,7 @@
device_type = "cpu";
reg = <1>;
enable-method = "psci";
+ next-level-cache = <&L2>;
};
cpu2: cpu@2 {
@@ -102,6 +104,7 @@
device_type = "cpu";
reg = <2>;
enable-method = "psci";
+ next-level-cache = <&L2>;
};
cpu3: cpu@3 {
@@ -109,7 +112,20 @@
device_type = "cpu";
reg = <3>;
enable-method = "psci";
+ next-level-cache = <&L2>;
};
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ de: display-engine {
+ compatible = "allwinner,sun50i-a64-display-engine";
+ allwinner,pipelines = <&mixer0>,
+ <&mixer1>;
+ status = "disabled";
};
osc24M: osc24M_clk {
@@ -194,6 +210,52 @@
#clock-cells = <1>;
#reset-cells = <1>;
};
+
+ mixer0: mixer@100000 {
+ compatible = "allwinner,sun50i-a64-de2-mixer-0";
+ reg = <0x100000 0x100000>;
+ clocks = <&display_clocks CLK_BUS_MIXER0>,
+ <&display_clocks CLK_MIXER0>;
+ clock-names = "bus",
+ "mod";
+ resets = <&display_clocks RST_MIXER0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mixer0_out: port@1 {
+ reg = <1>;
+
+ mixer0_out_tcon0: endpoint {
+ remote-endpoint = <&tcon0_in_mixer0>;
+ };
+ };
+ };
+ };
+
+ mixer1: mixer@200000 {
+ compatible = "allwinner,sun50i-a64-de2-mixer-1";
+ reg = <0x200000 0x100000>;
+ clocks = <&display_clocks CLK_BUS_MIXER1>,
+ <&display_clocks CLK_MIXER1>;
+ clock-names = "bus",
+ "mod";
+ resets = <&display_clocks RST_MIXER1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mixer1_out: port@1 {
+ reg = <1>;
+
+ mixer1_out_tcon1: endpoint {
+ remote-endpoint = <&tcon1_in_mixer1>;
+ };
+ };
+ };
+ };
};
syscon: syscon@1c00000 {
@@ -228,6 +290,75 @@
#dma-cells = <1>;
};
+ tcon0: lcd-controller@1c0c000 {
+ compatible = "allwinner,sun50i-a64-tcon-lcd",
+ "allwinner,sun8i-a83t-tcon-lcd";
+ reg = <0x01c0c000 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+ clock-names = "ahb", "tcon-ch0";
+ clock-output-names = "tcon-pixel-clock";
+ resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
+ reset-names = "lcd", "lvds";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon0_in_mixer0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&mixer0_out_tcon0>;
+ };
+ };
+
+ tcon0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+
+ tcon1: lcd-controller@1c0d000 {
+ compatible = "allwinner,sun50i-a64-tcon-tv",
+ "allwinner,sun8i-a83t-tcon-tv";
+ reg = <0x01c0d000 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
+ clock-names = "ahb", "tcon-ch1";
+ resets = <&ccu RST_BUS_TCON1>;
+ reset-names = "lcd";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon1_in: port@0 {
+ reg = <0>;
+
+ tcon1_in_mixer1: endpoint {
+ remote-endpoint = <&mixer1_out_tcon1>;
+ };
+ };
+
+ tcon1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon1_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon1>;
+ };
+ };
+ };
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun50i-a64-mmc";
reg = <0x01c0f000 0x1000>;
@@ -270,6 +401,11 @@
#size-cells = <0>;
};
+ sid: eeprom@1c14000 {
+ compatible = "allwinner,sun50i-a64-sid";
+ reg = <0x1c14000 0x400>;
+ };
+
usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;
@@ -399,7 +535,7 @@
};
mmc2_pins: mmc2-pins {
- pins = "PC1", "PC5", "PC6", "PC8", "PC9",
+ pins = "PC5", "PC6", "PC8", "PC9",
"PC10","PC11", "PC12", "PC13",
"PC14", "PC15", "PC16";
function = "mmc2";
@@ -407,6 +543,13 @@
bias-pull-up;
};
+ mmc2_ds_pin: mmc2-ds-pin {
+ pins = "PC1";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
pwm_pin: pwm_pin {
pins = "PD22";
function = "pwm";
@@ -442,7 +585,7 @@
function = "spi1";
};
- uart0_pins_a: uart0 {
+ uart0_pb_pins: uart0-pb-pins {
pins = "PB8", "PB9";
function = "uart0";
};
@@ -686,6 +829,50 @@
status = "disabled";
};
+ hdmi: hdmi@1ee0000 {
+ compatible = "allwinner,sun50i-a64-dw-hdmi",
+ "allwinner,sun8i-a83t-dw-hdmi";
+ reg = <0x01ee0000 0x10000>;
+ reg-io-width = <1>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+ <&ccu CLK_HDMI>;
+ clock-names = "iahb", "isfr", "tmds";
+ resets = <&ccu RST_BUS_HDMI1>;
+ reset-names = "ctrl";
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi-phy";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+
+ hdmi_in_tcon1: endpoint {
+ remote-endpoint = <&tcon1_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ hdmi_phy: hdmi-phy@1ef0000 {
+ compatible = "allwinner,sun50i-a64-hdmi-phy";
+ reg = <0x01ef0000 0x10000>;
+ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+ <&ccu 7>;
+ clock-names = "bus", "mod", "pll-0";
+ resets = <&ccu RST_BUS_HDMI0>;
+ reset-names = "phy";
+ #phy-cells = <0>;
+ };
+
rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
@@ -749,7 +936,7 @@
interrupt-controller;
#interrupt-cells = <3>;
- r_i2c_pins_a: i2c-a {
+ r_i2c_pl89_pins: r-i2c-pl89-pins {
pins = "PL8", "PL9";
function = "s_i2c";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts
new file mode 100644
index 000000000000..2e2b14c0ae75
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <arm/sunxi-bananapi-m2-plus-v1.2.dtsi>
+
+/ {
+ model = "Banana Pi BPI-M2-Plus v1.2 H5";
+ compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun50i-h5";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts
new file mode 100644
index 000000000000..77661006dfba
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <arm/sunxi-bananapi-m2-plus.dtsi>
+
+/ {
+ model = "Banana Pi BPI-M2-Plus H5";
+ compatible = "sinovoip,bpi-m2-plus", "allwinner,sun50i-h5";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index 62d646baac3c..b41dc1aab67d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -92,6 +92,49 @@
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+
+ soc {
+ mali: gpu@1e80000 {
+ compatible = "allwinner,sun50i-h5-mali", "arm,mali-450";
+ reg = <0x01e80000 0x30000>;
+ /*
+ * While the datasheet lists an interrupt for the
+ * PMU, the actual silicon does not have the PMU
+ * block. Reads all return zero, and writes are
+ * ignored.
+ */
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pp2",
+ "ppmmu2",
+ "pp3",
+ "ppmmu3",
+ "pmu";
+ clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+ clock-names = "bus", "core";
+ resets = <&ccu RST_BUS_GPU>;
+
+ assigned-clocks = <&ccu CLK_GPU>;
+ assigned-clock-rates = <384000000>;
+ };
+ };
};
&ccu {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
new file mode 100644
index 000000000000..0612c19cd994
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2018 Amarula Solutions
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "OrangePi One Plus";
+ compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&reg_cldo1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp805: pmic@36 {
+ compatible = "x-powers,axp805", "x-powers,axp806";
+ reg = <0x36>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ x-powers,self-working-mode;
+
+ regulators {
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl";
+ };
+
+ reg_aldo2: aldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-ac200";
+ };
+
+ reg_aldo3: aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc25-dram";
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-bias-pll";
+ };
+
+ reg_bldo2: bldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-efuse-pcie-hdmi-io";
+ };
+
+ reg_bldo3: bldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-dcxoio";
+ };
+
+ bldo4 {
+ /* unused */
+ };
+
+ reg_cldo1: cldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+ };
+
+ reg_cldo2: cldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+ };
+
+ reg_cldo3: cldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+ };
+
+ reg_dcdca: dcdca {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1080000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdcc: dcdcc {
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1080000>;
+ regulator-name = "vdd-gpu";
+ };
+
+ reg_dcdcd: dcdcd {
+ regulator-always-on;
+ regulator-min-microvolt = <960000>;
+ regulator-max-microvolt = <960000>;
+ regulator-name = "vdd-sys";
+ };
+
+ reg_dcdce: dcdce {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+ };
+
+ sw {
+ /* unused */
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index cfa5fffcf62b..040828d2e2c0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -92,6 +92,29 @@
#size-cells = <1>;
ranges;
+ syscon: syscon@3000000 {
+ compatible = "allwinner,sun50i-h6-system-control",
+ "allwinner,sun50i-a64-system-control";
+ reg = <0x03000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_c: sram@28000 {
+ compatible = "mmio-sram";
+ reg = <0x00028000 0x1e000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00028000 0x1e000>;
+
+ de2_sram: sram-section@0 {
+ compatible = "allwinner,sun50i-h6-sram-c",
+ "allwinner,sun50i-a64-sram-c";
+ reg = <0x0000 0x1e000>;
+ };
+ };
+ };
+
ccu: clock@3001000 {
compatible = "allwinner,sun50i-h6-ccu";
reg = <0x03001000 0x1000>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index fb3d2ee77c56..8253a1a9e985 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -341,7 +341,7 @@
sysmgr: sysmgr@ffd12000 {
compatible = "altr,sys-mgr", "syscon";
- reg = <0xffd12000 0x1000>;
+ reg = <0xffd12000 0x228>;
};
/* Local timer */
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 7c661753bfaf..2e3863ee12b3 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -21,6 +21,9 @@
aliases {
serial0 = &uart0;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
};
chosen {
@@ -124,6 +127,8 @@
&i2c1 {
status = "okay";
clock-frequency = <100000>;
+ i2c-sda-falling-time-ns = <890>; /* hcnt */
+ i2c-sdl-falling-time-ns = <890>; /* lcnt */
adc@14 {
compatible = "lltc,ltc2497";
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 125f4deb52fe..b664e7af74eb 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -107,7 +107,7 @@
clock-names = "uartclk", "apb_pclk";
};
- spi0: ssp@e1020000 {
+ spi0: spi@e1020000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
reg = <0 0xe1020000 0 0x1000>;
@@ -117,7 +117,7 @@
clock-names = "apb_pclk";
};
- spi1: ssp@e1030000 {
+ spi1: spi@e1030000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
reg = <0 0xe1030000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index a97c0e2d7bc6..c31f29d660de 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index d5c01427a5ca..18778ada7bd3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -60,6 +60,55 @@
serial1 = &uart_A;
};
+ linein: audio-codec@0 {
+ #sound-dai-cells = <0>;
+ compatible = "everest,es7241";
+ VDDA-supply = <&vcc_3v3>;
+ VDDP-supply = <&vcc_3v3>;
+ VDDD-supply = <&vcc_3v3>;
+ status = "okay";
+ sound-name-prefix = "Linein";
+ };
+
+ lineout: audio-codec@1 {
+ #sound-dai-cells = <0>;
+ compatible = "everest,es7154";
+ VDD-supply = <&vcc_3v3>;
+ PVDD-supply = <&vcc_5v>;
+ status = "okay";
+ sound-name-prefix = "Lineout";
+ };
+
+ spdif_dit: audio-codec@2 {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ status = "okay";
+ sound-name-prefix = "DIT";
+ };
+
+ dmics: audio-codec@3 {
+ #sound-dai-cells = <0>;
+ compatible = "dmic-codec";
+ num-channels = <7>;
+ wakeup-delay-ms = <50>;
+ status = "okay";
+ sound-name-prefix = "MIC";
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
main_12v: regulator-main_12v {
compatible = "regulator-fixed";
regulator-name = "12V";
@@ -68,15 +117,26 @@
regulator-always-on;
};
- vddio_boot: regulator-vddio_boot {
+ vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
- regulator-name = "VDDIO_BOOT";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
+ vcc_5v: regulator-vcc_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&main_12v>;
+
+ gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
@@ -95,26 +155,15 @@
regulator-always-on;
};
- vcc_3v3: regulator-vcc_3v3 {
+ vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
- vcc_5v: regulator-vcc_5v {
- compatible = "regulator-fixed";
- regulator-name = "VCC5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&main_12v>;
-
- gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
usb_pwr: regulator-usb_pwr {
compatible = "regulator-fixed";
regulator-name = "USB_PWR";
@@ -126,11 +175,6 @@
enable-active-high;
};
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
- };
-
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
@@ -138,13 +182,6 @@
clock-names = "ext_clock";
};
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
- };
-
speaker-leds {
compatible = "gpio-leds";
@@ -179,30 +216,129 @@
};
};
- linein: audio-codec@0 {
- #sound-dai-cells = <0>;
- compatible = "everest,es7241";
- VDDA-supply = <&vcc_3v3>;
- VDDP-supply = <&vcc_3v3>;
- VDDD-supply = <&vcc_3v3>;
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "AXG-S400";
+ audio-aux-devs = <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
+ <&tdmin_lb>, <&tdmout_c>;
+ audio-widgets = "Line", "Lineout",
+ "Line", "Linein",
+ "Speaker", "Speaker1 Left",
+ "Speaker", "Speaker1 Right";
+ audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+ "SPDIFOUT IN 0", "FRDDR_A OUT 3",
+ "TDMOUT_C IN 1", "FRDDR_B OUT 2",
+ "SPDIFOUT IN 1", "FRDDR_B OUT 3",
+ "TDMOUT_C IN 2", "FRDDR_C OUT 2",
+ "SPDIFOUT IN 2", "FRDDR_C OUT 3",
+ "TDM_C Playback", "TDMOUT_C OUT",
+ "TDMIN_A IN 2", "TDM_C Capture",
+ "TDMIN_A IN 5", "TDM_C Loopback",
+ "TDMIN_B IN 2", "TDM_C Capture",
+ "TDMIN_B IN 5", "TDM_C Loopback",
+ "TDMIN_C IN 2", "TDM_C Capture",
+ "TDMIN_C IN 5", "TDM_C Loopback",
+ "TDMIN_LB IN 2", "TDM_C Loopback",
+ "TDMIN_LB IN 5", "TDM_C Capture",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "TODDR_B IN 0", "TDMIN_A OUT",
+ "TODDR_C IN 0", "TDMIN_A OUT",
+ "TODDR_A IN 1", "TDMIN_B OUT",
+ "TODDR_B IN 1", "TDMIN_B OUT",
+ "TODDR_C IN 1", "TDMIN_B OUT",
+ "TODDR_A IN 2", "TDMIN_C OUT",
+ "TODDR_B IN 2", "TDMIN_C OUT",
+ "TODDR_C IN 2", "TDMIN_C OUT",
+ "TODDR_A IN 4", "PDM Capture",
+ "TODDR_B IN 4", "PDM Capture",
+ "TODDR_C IN 4", "PDM Capture",
+ "TODDR_A IN 6", "TDMIN_LB OUT",
+ "TODDR_B IN 6", "TDMIN_LB OUT",
+ "TODDR_C IN 6", "TDMIN_LB OUT",
+ "Lineout", "Lineout AOUTL",
+ "Lineout", "Lineout AOUTR",
+ "Speaker1 Left", "SPK1 OUT_A",
+ "Speaker1 Left", "SPK1 OUT_B",
+ "Speaker1 Right", "SPK1 OUT_C",
+ "Speaker1 Right", "SPK1 OUT_D",
+ "Linein AINL", "Linein",
+ "Linein AINR", "Linein";
+ assigned-clocks = <&clkc CLKID_HIFI_PLL>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <589824000>,
+ <270950400>,
+ <393216000>;
status = "okay";
- sound-name-prefix = "Linein";
- };
- lineout: audio-codec@1 {
- #sound-dai-cells = <0>;
- compatible = "everest,es7154";
- VDD-supply = <&vcc_3v3>;
- PVDD-supply = <&vcc_5v>;
- status = "okay";
- sound-name-prefix = "Lineout";
+ dai-link@0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link@1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link@2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ dai-link@3 {
+ sound-dai = <&toddr_a>;
+ };
+
+ dai-link@4 {
+ sound-dai = <&toddr_b>;
+ };
+
+ dai-link@5 {
+ sound-dai = <&toddr_c>;
+ };
+
+ dai-link@6 {
+ sound-dai = <&tdmif_c>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-rx-mask-1 = <1 1>;
+ mclk-fs = <256>;
+
+ codec@0 {
+ sound-dai = <&lineout>;
+ };
+
+ codec@1 {
+ sound-dai = <&speaker_amp1>;
+ };
+
+ codec@2 {
+ sound-dai = <&linein>;
+ };
+
+ };
+
+ dai-link@7 {
+ sound-dai = <&spdifout>;
+
+ codec {
+ sound-dai = <&spdif_dit>;
+ };
+ };
+
+ dai-link@8 {
+ sound-dai = <&pdm>;
+
+ codec {
+ sound-dai = <&dmics>;
+ };
+ };
};
- spdif_dit: audio-codec@2 {
- #sound-dai-cells = <0>;
- compatible = "linux,spdif-dit";
- status = "okay";
- sound-name-prefix = "DIT";
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
};
};
@@ -226,16 +362,16 @@
};
};
-&uart_A {
+&frddr_a {
status = "okay";
- pinctrl-0 = <&uart_a_pins>;
- pinctrl-names = "default";
};
-&uart_AO {
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
};
&ir {
@@ -260,6 +396,7 @@
PVDD_B-supply = <&main_12v>;
PVDD_C-supply = <&main_12v>;
PVDD_D-supply = <&main_12v>;
+ sound-name-prefix = "SPK1";
};
};
@@ -277,30 +414,22 @@
};
};
+&pdm {
+ pinctrl-0 = <&pdm_dclk_a14_pins>, <&pdm_din0_pins>,
+ <&pdm_din1_pins>, <&pdm_din2_pins>, <&pdm_din3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&pwm_ab {
status = "okay";
pinctrl-0 = <&pwm_a_x20_pins>;
pinctrl-names = "default";
};
-/* emmc storage */
-&sd_emmc_c {
+&saradc {
status = "okay";
- pinctrl-0 = <&emmc_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <180000000>;
- non-removable;
- disable-wp;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
-
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vddio_boot>;
+ vref-supply = <&vddio_ao18>;
};
/* wifi module */
@@ -330,7 +459,96 @@
};
};
-&saradc {
+/* emmc storage */
+&sd_emmc_c {
+ status = "disabled";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <180000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+&spdifout {
+ pinctrl-0 = <&spdif_out_a20_pins>;
+ pinctrl-names = "default";
status = "okay";
- vref-supply = <&vddio_ao18>;
+};
+
+&tdmif_a {
+ pinctrl-0 = <&tdma_sclk_pins>, <&tdma_fs_pins>,
+ <&tdma_din0_pins>, <&tdma_dout0_x15_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&tdmif_b {
+ pinctrl-0 = <&tdmb_sclk_pins>, <&tdmb_fs_pins>,
+ <&tdmb_din3_pins>, <&mclk_b_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&tdmif_c {
+ pinctrl-0 = <&tdmc_sclk_pins>, <&tdmc_fs_pins>,
+ <&tdmc_din1_pins>, <&tdmc_dout2_pins>,
+ <&mclk_c_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&tdmin_a {
+ status = "okay";
+};
+
+&tdmin_b {
+ status = "okay";
+};
+
+&tdmin_c {
+ status = "okay";
+};
+
+&tdmin_lb {
+ status = "okay";
+};
+
+&tdmout_c {
+ status = "okay";
+};
+
+&toddr_a {
+ status = "okay";
+};
+
+&toddr_b {
+ status = "okay";
+};
+
+&toddr_c {
+ status = "okay";
+};
+
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>;
+ pinctrl-names = "default";
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index c518130e5ce7..df017dbd2e57 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -3,13 +3,14 @@
* Copyright (c) 2017 Amlogic, Inc. All rights reserved.
*/
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-aoclkc.h>
#include <dt-bindings/clock/axg-audio-clkc.h>
#include <dt-bindings/clock/axg-clkc.h>
-#include <dt-bindings/clock/axg-aoclkc.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/meson-axg-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
#include <dt-bindings/reset/amlogic,meson-axg-reset.h>
/ {
@@ -19,22 +20,53 @@
#address-cells = <2>;
#size-cells = <2>;
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ tdmif_a: audio-controller@0 {
+ compatible = "amlogic,axg-tdm-iface";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TDM_A";
+ clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
+ <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+ clock-names = "mclk", "sclk", "lrclk";
+ status = "disabled";
+ };
- /* 16 MiB reserved for Hardware ROM Firmware */
- hwrom_reserved: hwrom@0 {
- reg = <0x0 0x0 0x0 0x1000000>;
- no-map;
- };
+ tdmif_b: audio-controller@1 {
+ compatible = "amlogic,axg-tdm-iface";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TDM_B";
+ clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+ <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+ clock-names = "mclk", "sclk", "lrclk";
+ status = "disabled";
+ };
- /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
- secmon_reserved: secmon@5000000 {
- reg = <0x0 0x05000000 0x0 0x300000>;
- no-map;
- };
+ tdmif_c: audio-controller@2 {
+ compatible = "amlogic,axg-tdm-iface";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TDM_C";
+ clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
+ <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
+ clock-names = "mclk", "sclk", "lrclk";
+ status = "disabled";
+ };
+
+ ao_alt_xtal: ao_alt_xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32000000>;
+ clock-output-names = "ao_alt_xtal";
+ #clock-cells = <0>;
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
cpus {
@@ -78,77 +110,27 @@
};
};
- arm-pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
- };
-
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
- tdmif_a: audio-controller@0 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_A";
- clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
- <&clkc_audio AUD_CLKID_MST_A_SCLK>,
- <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-
- tdmif_b: audio-controller@1 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_B";
- clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
- <&clkc_audio AUD_CLKID_MST_B_SCLK>,
- <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-
- tdmif_c: audio-controller@2 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_C";
- clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
- <&clkc_audio AUD_CLKID_MST_C_SCLK>,
- <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
- };
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
- xtal: xtal-clk {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "xtal";
- #clock-cells = <0>;
- };
+ /* 16 MiB reserved for Hardware ROM Firmware */
+ hwrom_reserved: hwrom@0 {
+ reg = <0x0 0x0 0x0 0x1000000>;
+ no-map;
+ };
- ao_alt_xtal: ao_alt_xtal-clk {
- compatible = "fixed-clock";
- clock-frequency = <32000000>;
- clock-output-names = "ao_alt_xtal";
- #clock-cells = <0>;
+ /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
+ secmon_reserved: secmon@5000000 {
+ reg = <0x0 0x05000000 0x0 0x300000>;
+ no-map;
+ };
};
soc {
@@ -157,310 +139,10 @@
#size-cells = <2>;
ranges;
- apb: apb@ffe00000 {
- compatible = "simple-bus";
- reg = <0x0 0xffe00000 0x0 0x200000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
-
- sd_emmc_b: sd@5000 {
- compatible = "amlogic,meson-axg-mmc";
- reg = <0x0 0x5000 0x0 0x800>;
- interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&clkc CLKID_SD_EMMC_B>,
- <&clkc CLKID_SD_EMMC_B_CLK0>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "clkin0", "clkin1";
- resets = <&reset RESET_SD_EMMC_B>;
- };
-
- sd_emmc_c: mmc@7000 {
- compatible = "amlogic,meson-axg-mmc";
- reg = <0x0 0x7000 0x0 0x800>;
- interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&clkc CLKID_SD_EMMC_C>,
- <&clkc CLKID_SD_EMMC_C_CLK0>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "clkin0", "clkin1";
- resets = <&reset RESET_SD_EMMC_C>;
- };
- };
-
- audio: bus@ff642000 {
- compatible = "simple-bus";
- reg = <0x0 0xff642000 0x0 0x2000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>;
-
- clkc_audio: clock-controller@0 {
- compatible = "amlogic,axg-audio-clkc";
- reg = <0x0 0x0 0x0 0xb4>;
- #clock-cells = <1>;
-
- clocks = <&clkc CLKID_AUDIO>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>,
- <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL3>,
- <&clkc CLKID_HIFI_PLL>,
- <&clkc CLKID_FCLK_DIV3>,
- <&clkc CLKID_FCLK_DIV4>,
- <&clkc CLKID_GP0_PLL>;
- clock-names = "pclk",
- "mst_in0",
- "mst_in1",
- "mst_in2",
- "mst_in3",
- "mst_in4",
- "mst_in5",
- "mst_in6",
- "mst_in7";
-
- resets = <&reset RESET_AUDIO>;
- };
-
- arb: reset-controller@280 {
- compatible = "amlogic,meson-axg-audio-arb";
- reg = <0x0 0x280 0x0 0x4>;
- #reset-cells = <1>;
- clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
- };
-
- tdmin_a: audio-controller@300 {
- compatible = "amlogic,axg-tdmin";
- reg = <0x0 0x300 0x0 0x40>;
- sound-name-prefix = "TDMIN_A";
- clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
- <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmin_b: audio-controller@340 {
- compatible = "amlogic,axg-tdmin";
- reg = <0x0 0x340 0x0 0x40>;
- sound-name-prefix = "TDMIN_B";
- clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
- <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmin_c: audio-controller@380 {
- compatible = "amlogic,axg-tdmin";
- reg = <0x0 0x380 0x0 0x40>;
- sound-name-prefix = "TDMIN_C";
- clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
- <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmin_lb: audio-controller@3c0 {
- compatible = "amlogic,axg-tdmin";
- reg = <0x0 0x3c0 0x0 0x40>;
- sound-name-prefix = "TDMIN_LB";
- clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- spdifout: audio-controller@480 {
- compatible = "amlogic,axg-spdifout";
- reg = <0x0 0x480 0x0 0x50>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "SPDIFOUT";
- clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
- <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
- clock-names = "pclk", "mclk";
- status = "disabled";
- };
-
- tdmout_a: audio-controller@500 {
- compatible = "amlogic,axg-tdmout";
- reg = <0x0 0x500 0x0 0x40>;
- sound-name-prefix = "TDMOUT_A";
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmout_b: audio-controller@540 {
- compatible = "amlogic,axg-tdmout";
- reg = <0x0 0x540 0x0 0x40>;
- sound-name-prefix = "TDMOUT_B";
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmout_c: audio-controller@580 {
- compatible = "amlogic,axg-tdmout";
- reg = <0x0 0x580 0x0 0x40>;
- sound-name-prefix = "TDMOUT_C";
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
- };
-
- cbus: bus@ffd00000 {
- compatible = "simple-bus";
- reg = <0x0 0xffd00000 0x0 0x25000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
-
- gpio_intc: interrupt-controller@f080 {
- compatible = "amlogic,meson-gpio-intc";
- reg = <0x0 0xf080 0x0 0x10>;
- interrupt-controller;
- #interrupt-cells = <2>;
- amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
- status = "disabled";
- };
-
- pwm_ab: pwm@1b000 {
- compatible = "amlogic,meson-axg-ee-pwm";
- reg = <0x0 0x1b000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm_cd: pwm@1a000 {
- compatible = "amlogic,meson-axg-ee-pwm";
- reg = <0x0 0x1a000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- reset: reset-controller@1004 {
- compatible = "amlogic,meson-axg-reset";
- reg = <0x0 0x01004 0x0 0x9c>;
- #reset-cells = <1>;
- };
-
- spicc0: spi@13000 {
- compatible = "amlogic,meson-axg-spicc";
- reg = <0x0 0x13000 0x0 0x3c>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clkc CLKID_SPICC0>;
- clock-names = "core";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spicc1: spi@15000 {
- compatible = "amlogic,meson-axg-spicc";
- reg = <0x0 0x15000 0x0 0x3c>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clkc CLKID_SPICC1>;
- clock-names = "core";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c0: i2c@1f000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x1f000 0x0 0x20>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c1: i2c@1e000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x1e000 0x0 0x20>;
- interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c2: i2c@1d000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x1d000 0x0 0x20>;
- interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c3: i2c@1c000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x1c000 0x0 0x20>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- uart_A: serial@24000 {
- compatible = "amlogic,meson-gx-uart";
- reg = <0x0 0x24000 0x0 0x18>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- };
-
- uart_B: serial@23000 {
- compatible = "amlogic,meson-gx-uart";
- reg = <0x0 0x23000 0x0 0x18>;
- interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- };
- };
-
ethmac: ethernet@ff3f0000 {
- compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+ compatible = "amlogic,meson-axg-dwmac", "snps,dwmac";
reg = <0x0 0xff3f0000 0x0 0x10000
- 0x0 0xff634540 0x0 0x8>;
+ 0x0 0xff634540 0x0 0x8>;
interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "macirq";
clocks = <&clkc CLKID_ETH>,
@@ -470,54 +152,26 @@
status = "disabled";
};
- gic: interrupt-controller@ffc01000 {
- compatible = "arm,gic-400";
- reg = <0x0 0xffc01000 0 0x1000>,
- <0x0 0xffc02000 0 0x2000>,
- <0x0 0xffc04000 0 0x2000>,
- <0x0 0xffc06000 0 0x2000>;
- interrupt-controller;
- interrupts = <GIC_PPI 9
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
- #interrupt-cells = <3>;
- #address-cells = <0>;
- };
-
- hiubus: bus@ff63c000 {
- compatible = "simple-bus";
- reg = <0x0 0xff63c000 0x0 0x1c00>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
-
- sysctrl: system-controller@0 {
- compatible = "amlogic,meson-axg-hhi-sysctrl", "syscon", "simple-mfd";
- reg = <0 0 0 0x400>;
-
- clkc: clock-controller {
- compatible = "amlogic,axg-clkc";
- #clock-cells = <1>;
- };
- };
- };
-
- mailbox: mailbox@ff63dc00 {
- compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
- reg = <0 0xff63dc00 0 0x400>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
- #mbox-cells = <1>;
+ pdm: audio-controller@ff632000 {
+ compatible = "amlogic,axg-pdm";
+ reg = <0x0 0xff632000 0x0 0x34>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "PDM";
+ clocks = <&clkc_audio AUD_CLKID_PDM>,
+ <&clkc_audio AUD_CLKID_PDM_DCLK>,
+ <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+ clock-names = "pclk", "dclk", "sysclk";
+ status = "disabled";
};
- periphs: periphs@ff634000 {
+ periphs: bus@ff634000 {
compatible = "simple-bus";
reg = <0x0 0xff634000 0x0 0x2000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
- hwrng: rng {
+ hwrng: rng@18 {
compatible = "amlogic,meson-rng";
reg = <0x0 0x18 0x0 0x4>;
clocks = <&clkc CLKID_RNG0>;
@@ -532,28 +186,92 @@
gpio: bank@480 {
reg = <0x0 0x00480 0x0 0x40>,
- <0x0 0x004e8 0x0 0x14>,
- <0x0 0x00520 0x0 0x14>,
- <0x0 0x00430 0x0 0x3c>;
+ <0x0 0x004e8 0x0 0x14>,
+ <0x0 0x00520 0x0 0x14>,
+ <0x0 0x00430 0x0 0x3c>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_periphs 0 0 86>;
};
+ i2c0_pins: i2c0 {
+ mux {
+ groups = "i2c0_sck",
+ "i2c0_sda";
+ function = "i2c0";
+ };
+ };
+
+ i2c1_x_pins: i2c1_x {
+ mux {
+ groups = "i2c1_sck_x",
+ "i2c1_sda_x";
+ function = "i2c1";
+ };
+ };
+
+ i2c1_z_pins: i2c1_z {
+ mux {
+ groups = "i2c1_sck_z",
+ "i2c1_sda_z";
+ function = "i2c1";
+ };
+ };
+
+ i2c2_a_pins: i2c2_a {
+ mux {
+ groups = "i2c2_sck_a",
+ "i2c2_sda_a";
+ function = "i2c2";
+ };
+ };
+
+ i2c2_x_pins: i2c2_x {
+ mux {
+ groups = "i2c2_sck_x",
+ "i2c2_sda_x";
+ function = "i2c2";
+ };
+ };
+
+ i2c3_a6_pins: i2c3_a6 {
+ mux {
+ groups = "i2c3_sda_a6",
+ "i2c3_sck_a7";
+ function = "i2c3";
+ };
+ };
+
+ i2c3_a12_pins: i2c3_a12 {
+ mux {
+ groups = "i2c3_sda_a12",
+ "i2c3_sck_a13";
+ function = "i2c3";
+ };
+ };
+
+ i2c3_a19_pins: i2c3_a19 {
+ mux {
+ groups = "i2c3_sda_a19",
+ "i2c3_sck_a20";
+ function = "i2c3";
+ };
+ };
+
emmc_pins: emmc {
mux {
groups = "emmc_nand_d0",
- "emmc_nand_d1",
- "emmc_nand_d2",
- "emmc_nand_d3",
- "emmc_nand_d4",
- "emmc_nand_d5",
- "emmc_nand_d6",
- "emmc_nand_d7",
- "emmc_clk",
- "emmc_cmd",
- "emmc_ds";
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3",
+ "emmc_nand_d4",
+ "emmc_nand_d5",
+ "emmc_nand_d6",
+ "emmc_nand_d7",
+ "emmc_clk",
+ "emmc_cmd",
+ "emmc_ds";
function = "emmc";
};
};
@@ -569,40 +287,57 @@
};
};
- sdio_pins: sdio {
+ eth_rgmii_x_pins: eth-x-rgmii {
mux {
- groups = "sdio_d0",
- "sdio_d1",
- "sdio_d2",
- "sdio_d3",
- "sdio_cmd",
- "sdio_clk";
- function = "sdio";
+ groups = "eth_mdio_x",
+ "eth_mdc_x",
+ "eth_rgmii_rx_clk_x",
+ "eth_rx_dv_x",
+ "eth_rxd0_x",
+ "eth_rxd1_x",
+ "eth_rxd2_rgmii",
+ "eth_rxd3_rgmii",
+ "eth_rgmii_tx_clk",
+ "eth_txen_x",
+ "eth_txd0_x",
+ "eth_txd1_x",
+ "eth_txd2_rgmii",
+ "eth_txd3_rgmii";
+ function = "eth";
};
};
- sdio_clk_gate_pins: sdio_clk_gate {
+ eth_rgmii_y_pins: eth-y-rgmii {
mux {
- groups = "GPIOX_4";
- function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "GPIOX_4";
- bias-pull-down;
+ groups = "eth_mdio_y",
+ "eth_mdc_y",
+ "eth_rgmii_rx_clk_y",
+ "eth_rx_dv_y",
+ "eth_rxd0_y",
+ "eth_rxd1_y",
+ "eth_rxd2_rgmii",
+ "eth_rxd3_rgmii",
+ "eth_rgmii_tx_clk",
+ "eth_txen_y",
+ "eth_txd0_y",
+ "eth_txd1_y",
+ "eth_txd2_rgmii",
+ "eth_txd3_rgmii";
+ function = "eth";
};
};
eth_rmii_x_pins: eth-x-rmii {
mux {
groups = "eth_mdio_x",
- "eth_mdc_x",
- "eth_rgmii_rx_clk_x",
- "eth_rx_dv_x",
- "eth_rxd0_x",
- "eth_rxd1_x",
- "eth_txen_x",
- "eth_txd0_x",
- "eth_txd1_x";
+ "eth_mdc_x",
+ "eth_rgmii_rx_clk_x",
+ "eth_rx_dv_x",
+ "eth_rxd0_x",
+ "eth_rxd1_x",
+ "eth_txen_x",
+ "eth_txd0_x",
+ "eth_txd1_x";
function = "eth";
};
};
@@ -610,55 +345,29 @@
eth_rmii_y_pins: eth-y-rmii {
mux {
groups = "eth_mdio_y",
- "eth_mdc_y",
- "eth_rgmii_rx_clk_y",
- "eth_rx_dv_y",
- "eth_rxd0_y",
- "eth_rxd1_y",
- "eth_txen_y",
- "eth_txd0_y",
- "eth_txd1_y";
+ "eth_mdc_y",
+ "eth_rgmii_rx_clk_y",
+ "eth_rx_dv_y",
+ "eth_rxd0_y",
+ "eth_rxd1_y",
+ "eth_txen_y",
+ "eth_txd0_y",
+ "eth_txd1_y";
function = "eth";
};
};
- eth_rgmii_x_pins: eth-x-rgmii {
+ mclk_b_pins: mclk_b {
mux {
- groups = "eth_mdio_x",
- "eth_mdc_x",
- "eth_rgmii_rx_clk_x",
- "eth_rx_dv_x",
- "eth_rxd0_x",
- "eth_rxd1_x",
- "eth_rxd2_rgmii",
- "eth_rxd3_rgmii",
- "eth_rgmii_tx_clk",
- "eth_txen_x",
- "eth_txd0_x",
- "eth_txd1_x",
- "eth_txd2_rgmii",
- "eth_txd3_rgmii";
- function = "eth";
+ groups = "mclk_b";
+ function = "mclk_b";
};
};
- eth_rgmii_y_pins: eth-y-rgmii {
+ mclk_c_pins: mclk_c {
mux {
- groups = "eth_mdio_y",
- "eth_mdc_y",
- "eth_rgmii_rx_clk_y",
- "eth_rx_dv_y",
- "eth_rxd0_y",
- "eth_rxd1_y",
- "eth_rxd2_rgmii",
- "eth_rxd3_rgmii",
- "eth_rgmii_tx_clk",
- "eth_txen_y",
- "eth_txd0_y",
- "eth_txd1_y",
- "eth_txd2_rgmii",
- "eth_txd3_rgmii";
- function = "eth";
+ groups = "mclk_c";
+ function = "mclk_c";
};
};
@@ -788,6 +497,29 @@
};
};
+ sdio_pins: sdio {
+ mux {
+ groups = "sdio_d0",
+ "sdio_d1",
+ "sdio_d2",
+ "sdio_d3",
+ "sdio_cmd",
+ "sdio_clk";
+ function = "sdio";
+ };
+ };
+
+ sdio_clk_gate_pins: sdio_clk_gate {
+ mux {
+ groups = "GPIOX_4";
+ function = "gpio_periphs";
+ };
+ cfg-pull-down {
+ pins = "GPIOX_4";
+ bias-pull-down;
+ };
+ };
+
spdif_in_z_pins: spdif_in_z {
mux {
groups = "spdif_in_z";
@@ -823,13 +555,6 @@
};
};
- spdif_out_z_pins: spdif_out_z {
- mux {
- groups = "spdif_out_z";
- function = "spdif_out";
- };
- };
-
spdif_out_a1_pins: spdif_out_a1 {
mux {
groups = "spdif_out_a1";
@@ -858,11 +583,18 @@
};
};
+ spdif_out_z_pins: spdif_out_z {
+ mux {
+ groups = "spdif_out_z";
+ function = "spdif_out";
+ };
+ };
+
spi0_pins: spi0 {
mux {
groups = "spi0_miso",
- "spi0_mosi",
- "spi0_clk";
+ "spi0_mosi",
+ "spi0_clk";
function = "spi0";
};
};
@@ -888,12 +620,11 @@
};
};
-
spi1_a_pins: spi1_a {
mux {
groups = "spi1_miso_a",
- "spi1_mosi_a",
- "spi1_clk_a";
+ "spi1_mosi_a",
+ "spi1_clk_a";
function = "spi1";
};
};
@@ -915,8 +646,8 @@
spi1_x_pins: spi1_x {
mux {
groups = "spi1_miso_x",
- "spi1_mosi_x",
- "spi1_clk_x";
+ "spi1_mosi_x",
+ "spi1_clk_x";
function = "spi1";
};
};
@@ -928,145 +659,52 @@
};
};
- i2c0_pins: i2c0 {
- mux {
- groups = "i2c0_sck",
- "i2c0_sda";
- function = "i2c0";
- };
- };
-
- i2c1_z_pins: i2c1_z {
- mux {
- groups = "i2c1_sck_z",
- "i2c1_sda_z";
- function = "i2c1";
- };
- };
-
- i2c1_x_pins: i2c1_x {
- mux {
- groups = "i2c1_sck_x",
- "i2c1_sda_x";
- function = "i2c1";
- };
- };
-
- i2c2_x_pins: i2c2_x {
- mux {
- groups = "i2c2_sck_x",
- "i2c2_sda_x";
- function = "i2c2";
- };
- };
-
- i2c2_a_pins: i2c2_a {
- mux {
- groups = "i2c2_sck_a",
- "i2c2_sda_a";
- function = "i2c2";
- };
- };
-
- i2c3_a6_pins: i2c3_a6 {
- mux {
- groups = "i2c3_sda_a6",
- "i2c3_sck_a7";
- function = "i2c3";
- };
- };
-
- i2c3_a12_pins: i2c3_a12 {
- mux {
- groups = "i2c3_sda_a12",
- "i2c3_sck_a13";
- function = "i2c3";
- };
- };
-
- i2c3_a19_pins: i2c3_a19 {
- mux {
- groups = "i2c3_sda_a19",
- "i2c3_sck_a20";
- function = "i2c3";
- };
- };
-
- uart_a_pins: uart_a {
- mux {
- groups = "uart_tx_a",
- "uart_rx_a";
- function = "uart_a";
- };
- };
-
- uart_a_cts_rts_pins: uart_a_cts_rts {
- mux {
- groups = "uart_cts_a",
- "uart_rts_a";
- function = "uart_a";
- };
- };
-
- uart_b_x_pins: uart_b_x {
- mux {
- groups = "uart_tx_b_x",
- "uart_rx_b_x";
- function = "uart_b";
- };
- };
-
- uart_b_x_cts_rts_pins: uart_b_x_cts_rts {
+ tdma_din0_pins: tdma_din0 {
mux {
- groups = "uart_cts_b_x",
- "uart_rts_b_x";
- function = "uart_b";
+ groups = "tdma_din0";
+ function = "tdma";
};
};
- uart_b_z_pins: uart_b_z {
+ tdma_dout0_x14_pins: tdma_dout0_x14 {
mux {
- groups = "uart_tx_b_z",
- "uart_rx_b_z";
- function = "uart_b";
+ groups = "tdma_dout0_x14";
+ function = "tdma";
};
};
- uart_b_z_cts_rts_pins: uart_b_z_cts_rts {
+ tdma_dout0_x15_pins: tdma_dout0_x15 {
mux {
- groups = "uart_cts_b_z",
- "uart_rts_b_z";
- function = "uart_b";
+ groups = "tdma_dout0_x15";
+ function = "tdma";
};
};
- uart_ao_b_z_pins: uart_ao_b_z {
+ tdma_dout1_pins: tdma_dout1 {
mux {
- groups = "uart_ao_tx_b_z",
- "uart_ao_rx_b_z";
- function = "uart_ao_b_z";
+ groups = "tdma_dout1";
+ function = "tdma";
};
};
- uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts {
+ tdma_din1_pins: tdma_din1 {
mux {
- groups = "uart_ao_cts_b_z",
- "uart_ao_rts_b_z";
- function = "uart_ao_b_z";
+ groups = "tdma_din1";
+ function = "tdma";
};
};
- mclk_b_pins: mclk_b {
+ tdma_fs_pins: tdma_fs {
mux {
- groups = "mclk_b";
- function = "mclk_b";
+ groups = "tdma_fs";
+ function = "tdma";
};
};
- mclk_c_pins: mclk_c {
+ tdma_fs_slv_pins: tdma_fs_slv {
mux {
- groups = "mclk_c";
- function = "mclk_c";
+ groups = "tdma_fs_slv";
+ function = "tdma";
};
};
@@ -1084,65 +722,58 @@
};
};
- tdma_fs_pins: tdma_fs {
- mux {
- groups = "tdma_fs";
- function = "tdma";
- };
- };
-
- tdma_fs_slv_pins: tdma_fs_slv {
+ tdmb_din0_pins: tdmb_din0 {
mux {
- groups = "tdma_fs_slv";
- function = "tdma";
+ groups = "tdmb_din0";
+ function = "tdmb";
};
};
- tdma_din0_pins: tdma_din0 {
+ tdmb_din1_pins: tdmb_din1 {
mux {
- groups = "tdma_din0";
- function = "tdma";
+ groups = "tdmb_din1";
+ function = "tdmb";
};
};
- tdma_dout0_x14_pins: tdma_dout0_x14 {
+ tdmb_din2_pins: tdmb_din2 {
mux {
- groups = "tdma_dout0_x14";
- function = "tdma";
+ groups = "tdmb_din2";
+ function = "tdmb";
};
};
- tdma_dout0_x15_pins: tdma_dout0_x15 {
+ tdmb_din3_pins: tdmb_din3 {
mux {
- groups = "tdma_dout0_x15";
- function = "tdma";
+ groups = "tdmb_din3";
+ function = "tdmb";
};
};
- tdma_dout1_pins: tdma_dout1 {
+ tdmb_dout0_pins: tdmb_dout0 {
mux {
- groups = "tdma_dout1";
- function = "tdma";
+ groups = "tdmb_dout0";
+ function = "tdmb";
};
};
- tdma_din1_pins: tdma_din1 {
+ tdmb_dout1_pins: tdmb_dout1 {
mux {
- groups = "tdma_din1";
- function = "tdma";
+ groups = "tdmb_dout1";
+ function = "tdmb";
};
};
- tdmb_sclk_pins: tdmb_sclk {
+ tdmb_dout2_pins: tdmb_dout2 {
mux {
- groups = "tdmb_sclk";
+ groups = "tdmb_dout2";
function = "tdmb";
};
};
- tdmb_sclk_slv_pins: tdmb_sclk_slv {
+ tdmb_dout3_pins: tdmb_dout3 {
mux {
- groups = "tdmb_sclk_slv";
+ groups = "tdmb_dout3";
function = "tdmb";
};
};
@@ -1161,163 +792,412 @@
};
};
- tdmb_din0_pins: tdmb_din0 {
+ tdmb_sclk_pins: tdmb_sclk {
mux {
- groups = "tdmb_din0";
+ groups = "tdmb_sclk";
function = "tdmb";
};
};
- tdmb_dout0_pins: tdmb_dout0 {
+ tdmb_sclk_slv_pins: tdmb_sclk_slv {
mux {
- groups = "tdmb_dout0";
+ groups = "tdmb_sclk_slv";
function = "tdmb";
};
};
- tdmb_din1_pins: tdmb_din1 {
+ tdmc_fs_pins: tdmc_fs {
mux {
- groups = "tdmb_din1";
- function = "tdmb";
+ groups = "tdmc_fs";
+ function = "tdmc";
};
};
- tdmb_dout1_pins: tdmb_dout1 {
+ tdmc_fs_slv_pins: tdmc_fs_slv {
mux {
- groups = "tdmb_dout1";
- function = "tdmb";
+ groups = "tdmc_fs_slv";
+ function = "tdmc";
};
};
- tdmb_din2_pins: tdmb_din2 {
+ tdmc_sclk_pins: tdmc_sclk {
mux {
- groups = "tdmb_din2";
- function = "tdmb";
+ groups = "tdmc_sclk";
+ function = "tdmc";
};
};
- tdmb_dout2_pins: tdmb_dout2 {
+ tdmc_sclk_slv_pins: tdmc_sclk_slv {
mux {
- groups = "tdmb_dout2";
- function = "tdmb";
+ groups = "tdmc_sclk_slv";
+ function = "tdmc";
};
};
- tdmb_din3_pins: tdmb_din3 {
+ tdmc_din0_pins: tdmc_din0 {
mux {
- groups = "tdmb_din3";
- function = "tdmb";
+ groups = "tdmc_din0";
+ function = "tdmc";
};
};
- tdmb_dout3_pins: tdmb_dout3 {
+ tdmc_din1_pins: tdmc_din1 {
mux {
- groups = "tdmb_dout3";
- function = "tdmb";
+ groups = "tdmc_din1";
+ function = "tdmc";
};
};
- tdmc_sclk_pins: tdmc_sclk {
+ tdmc_din2_pins: tdmc_din2 {
mux {
- groups = "tdmc_sclk";
+ groups = "tdmc_din2";
function = "tdmc";
};
};
- tdmc_sclk_slv_pins: tdmc_sclk_slv {
+ tdmc_din3_pins: tdmc_din3 {
mux {
- groups = "tdmc_sclk_slv";
+ groups = "tdmc_din3";
function = "tdmc";
};
};
- tdmc_fs_pins: tdmc_fs {
+ tdmc_dout0_pins: tdmc_dout0 {
mux {
- groups = "tdmc_fs";
+ groups = "tdmc_dout0";
function = "tdmc";
};
};
- tdmc_fs_slv_pins: tdmc_fs_slv {
+ tdmc_dout1_pins: tdmc_dout1 {
mux {
- groups = "tdmc_fs_slv";
+ groups = "tdmc_dout1";
function = "tdmc";
};
};
- tdmc_din0_pins: tdmc_din0 {
+ tdmc_dout2_pins: tdmc_dout2 {
mux {
- groups = "tdmc_din0";
+ groups = "tdmc_dout2";
function = "tdmc";
};
};
- tdmc_dout0_pins: tdmc_dout0 {
+ tdmc_dout3_pins: tdmc_dout3 {
mux {
- groups = "tdmc_dout0";
+ groups = "tdmc_dout3";
function = "tdmc";
};
};
- tdmc_din1_pins: tdmc_din1 {
+ uart_a_pins: uart_a {
mux {
- groups = "tdmc_din1";
- function = "tdmc";
+ groups = "uart_tx_a",
+ "uart_rx_a";
+ function = "uart_a";
};
};
- tdmc_dout1_pins: tdmc_dout1 {
+ uart_a_cts_rts_pins: uart_a_cts_rts {
mux {
- groups = "tdmc_dout1";
- function = "tdmc";
+ groups = "uart_cts_a",
+ "uart_rts_a";
+ function = "uart_a";
};
};
- tdmc_din2_pins: tdmc_din2 {
+ uart_b_x_pins: uart_b_x {
mux {
- groups = "tdmc_din2";
- function = "tdmc";
+ groups = "uart_tx_b_x",
+ "uart_rx_b_x";
+ function = "uart_b";
};
};
- tdmc_dout2_pins: tdmc_dout2 {
+ uart_b_x_cts_rts_pins: uart_b_x_cts_rts {
mux {
- groups = "tdmc_dout2";
- function = "tdmc";
+ groups = "uart_cts_b_x",
+ "uart_rts_b_x";
+ function = "uart_b";
};
};
- tdmc_din3_pins: tdmc_din3 {
+ uart_b_z_pins: uart_b_z {
mux {
- groups = "tdmc_din3";
- function = "tdmc";
+ groups = "uart_tx_b_z",
+ "uart_rx_b_z";
+ function = "uart_b";
};
};
- tdmc_dout3_pins: tdmc_dout3 {
+ uart_b_z_cts_rts_pins: uart_b_z_cts_rts {
mux {
- groups = "tdmc_dout3";
- function = "tdmc";
+ groups = "uart_cts_b_z",
+ "uart_rts_b_z";
+ function = "uart_b";
+ };
+ };
+
+ uart_ao_b_z_pins: uart_ao_b_z {
+ mux {
+ groups = "uart_ao_tx_b_z",
+ "uart_ao_rx_b_z";
+ function = "uart_ao_b_z";
+ };
+ };
+
+ uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts {
+ mux {
+ groups = "uart_ao_cts_b_z",
+ "uart_ao_rts_b_z";
+ function = "uart_ao_b_z";
};
};
};
};
- sram: sram@fffc0000 {
- compatible = "amlogic,meson-axg-sram", "mmio-sram";
- reg = <0x0 0xfffc0000 0x0 0x20000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x0 0xfffc0000 0x20000>;
+ hiubus: bus@ff63c000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff63c000 0x0 0x1c00>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
- cpu_scp_lpri: scp-shmem@0 {
- compatible = "amlogic,meson-axg-scp-shmem";
- reg = <0x13000 0x400>;
+ sysctrl: system-controller@0 {
+ compatible = "amlogic,meson-axg-hhi-sysctrl",
+ "simple-mfd", "syscon";
+ reg = <0 0 0 0x400>;
+
+ clkc: clock-controller {
+ compatible = "amlogic,axg-clkc";
+ #clock-cells = <1>;
+ };
};
+ };
- cpu_scp_hpri: scp-shmem@200 {
- compatible = "amlogic,meson-axg-scp-shmem";
- reg = <0x13400 0x400>;
+ mailbox: mailbox@ff63dc00 {
+ compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
+ reg = <0 0xff63dc00 0 0x400>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
+ #mbox-cells = <1>;
+ };
+
+ audio: bus@ff642000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff642000 0x0 0x2000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>;
+
+ clkc_audio: clock-controller@0 {
+ compatible = "amlogic,axg-audio-clkc";
+ reg = <0x0 0x0 0x0 0xb4>;
+ #clock-cells = <1>;
+
+ clocks = <&clkc CLKID_AUDIO>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL3>,
+ <&clkc CLKID_HIFI_PLL>,
+ <&clkc CLKID_FCLK_DIV3>,
+ <&clkc CLKID_FCLK_DIV4>,
+ <&clkc CLKID_GP0_PLL>;
+ clock-names = "pclk",
+ "mst_in0",
+ "mst_in1",
+ "mst_in2",
+ "mst_in3",
+ "mst_in4",
+ "mst_in5",
+ "mst_in6",
+ "mst_in7";
+
+ resets = <&reset RESET_AUDIO>;
+ };
+
+ toddr_a: audio-controller@100 {
+ compatible = "amlogic,axg-toddr";
+ reg = <0x0 0x100 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TODDR_A";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
+ resets = <&arb AXG_ARB_TODDR_A>;
+ status = "disabled";
+ };
+
+ toddr_b: audio-controller@140 {
+ compatible = "amlogic,axg-toddr";
+ reg = <0x0 0x140 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TODDR_B";
+ interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
+ resets = <&arb AXG_ARB_TODDR_B>;
+ status = "disabled";
+ };
+
+ toddr_c: audio-controller@180 {
+ compatible = "amlogic,axg-toddr";
+ reg = <0x0 0x180 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TODDR_C";
+ interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
+ resets = <&arb AXG_ARB_TODDR_C>;
+ status = "disabled";
+ };
+
+ frddr_a: audio-controller@1c0 {
+ compatible = "amlogic,axg-frddr";
+ reg = <0x0 0x1c0 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "FRDDR_A";
+ interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+ resets = <&arb AXG_ARB_FRDDR_A>;
+ status = "disabled";
+ };
+
+ frddr_b: audio-controller@200 {
+ compatible = "amlogic,axg-frddr";
+ reg = <0x0 0x200 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "FRDDR_B";
+ interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
+ resets = <&arb AXG_ARB_FRDDR_B>;
+ status = "disabled";
+ };
+
+ frddr_c: audio-controller@240 {
+ compatible = "amlogic,axg-frddr";
+ reg = <0x0 0x240 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "FRDDR_C";
+ interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
+ resets = <&arb AXG_ARB_FRDDR_C>;
+ status = "disabled";
+ };
+
+ arb: reset-controller@280 {
+ compatible = "amlogic,meson-axg-audio-arb";
+ reg = <0x0 0x280 0x0 0x4>;
+ #reset-cells = <1>;
+ clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+ };
+
+ tdmin_a: audio-controller@300 {
+ compatible = "amlogic,axg-tdmin";
+ reg = <0x0 0x300 0x0 0x40>;
+ sound-name-prefix = "TDMIN_A";
+ clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
+ <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmin_b: audio-controller@340 {
+ compatible = "amlogic,axg-tdmin";
+ reg = <0x0 0x340 0x0 0x40>;
+ sound-name-prefix = "TDMIN_B";
+ clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
+ <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmin_c: audio-controller@380 {
+ compatible = "amlogic,axg-tdmin";
+ reg = <0x0 0x380 0x0 0x40>;
+ sound-name-prefix = "TDMIN_C";
+ clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
+ <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmin_lb: audio-controller@3c0 {
+ compatible = "amlogic,axg-tdmin";
+ reg = <0x0 0x3c0 0x0 0x40>;
+ sound-name-prefix = "TDMIN_LB";
+ clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
+ <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ spdifout: audio-controller@480 {
+ compatible = "amlogic,axg-spdifout";
+ reg = <0x0 0x480 0x0 0x50>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SPDIFOUT";
+ clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+ <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+ clock-names = "pclk", "mclk";
+ status = "disabled";
+ };
+
+ tdmout_a: audio-controller@500 {
+ compatible = "amlogic,axg-tdmout";
+ reg = <0x0 0x500 0x0 0x40>;
+ sound-name-prefix = "TDMOUT_A";
+ clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmout_b: audio-controller@540 {
+ compatible = "amlogic,axg-tdmout";
+ reg = <0x0 0x540 0x0 0x40>;
+ sound-name-prefix = "TDMOUT_B";
+ clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
+ <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmout_c: audio-controller@580 {
+ compatible = "amlogic,axg-tdmout";
+ reg = <0x0 0x580 0x0 0x40>;
+ sound-name-prefix = "TDMOUT_C";
+ clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
+ <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
};
};
@@ -1329,7 +1209,7 @@
ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
sysctrl_AO: sys-ctrl@0 {
- compatible = "amlogic,meson-axg-ao-sysctrl", "syscon", "simple-mfd";
+ compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon";
reg = <0x0 0x0 0x0 0x100>;
clkc_AO: clock-controller {
@@ -1347,8 +1227,8 @@
gpio_ao: bank@14 {
reg = <0x0 0x00014 0x0 0x8>,
- <0x0 0x0002c 0x0 0x4>,
- <0x0 0x00024 0x0 0x8>;
+ <0x0 0x0002c 0x0 0x4>,
+ <0x0 0x00024 0x0 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
@@ -1407,7 +1287,7 @@
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_ao_tx_a",
- "uart_ao_rx_a";
+ "uart_ao_rx_a";
function = "uart_ao_a";
};
};
@@ -1415,7 +1295,7 @@
uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
mux {
groups = "uart_ao_cts_a",
- "uart_ao_rts_a";
+ "uart_ao_rts_a";
function = "uart_ao_a";
};
};
@@ -1423,7 +1303,7 @@
uart_ao_b_pins: uart_ao_b {
mux {
groups = "uart_ao_tx_b",
- "uart_ao_rx_b";
+ "uart_ao_rx_b";
function = "uart_ao_b";
};
};
@@ -1431,7 +1311,7 @@
uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
mux {
groups = "uart_ao_cts_b",
- "uart_ao_rts_b";
+ "uart_ao_rts_b";
function = "uart_ao_b";
};
};
@@ -1443,13 +1323,6 @@
amlogic,has-chip-id;
};
- pwm_AO_ab: pwm@7000 {
- compatible = "amlogic,meson-axg-ao-pwm";
- reg = <0x0 0x07000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
pwm_AO_cd: pwm@2000 {
compatible = "amlogic,meson-axg-ao-pwm";
reg = <0x0 0x02000 0x0 0x20>;
@@ -1457,16 +1330,6 @@
status = "disabled";
};
- i2c_AO: i2c@5000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x05000 0x0 0x20>;
- interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_AO_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
uart_AO: serial@3000 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
reg = <0x0 0x3000 0x0 0x18>;
@@ -1485,6 +1348,23 @@
status = "disabled";
};
+ i2c_AO: i2c@5000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x05000 0x0 0x20>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_AO_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pwm_AO_ab: pwm@7000 {
+ compatible = "amlogic,meson-axg-ao-pwm";
+ reg = <0x0 0x07000 0x0 0x20>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
ir: ir@8000 {
compatible = "amlogic,meson-gxbb-ir";
reg = <0x0 0x8000 0x0 0x20>;
@@ -1499,12 +1379,211 @@
#io-channel-cells = <1>;
interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>,
- <&clkc_AO CLKID_AO_SAR_ADC>,
- <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
- <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
+ <&clkc_AO CLKID_AO_SAR_ADC>,
+ <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
+ <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
clock-names = "clkin", "core", "adc_clk", "adc_sel";
status = "disabled";
};
};
+
+ gic: interrupt-controller@ffc01000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xffc01000 0 0x1000>,
+ <0x0 0xffc02000 0 0x2000>,
+ <0x0 0xffc04000 0 0x2000>,
+ <0x0 0xffc06000 0 0x2000>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ };
+
+ cbus: bus@ffd00000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xffd00000 0x0 0x25000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
+
+ reset: reset-controller@1004 {
+ compatible = "amlogic,meson-axg-reset";
+ reg = <0x0 0x01004 0x0 0x9c>;
+ #reset-cells = <1>;
+ };
+
+ gpio_intc: interrupt-controller@f080 {
+ compatible = "amlogic,meson-gpio-intc";
+ reg = <0x0 0xf080 0x0 0x10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+ status = "disabled";
+ };
+
+ pwm_ab: pwm@1b000 {
+ compatible = "amlogic,meson-axg-ee-pwm";
+ reg = <0x0 0x1b000 0x0 0x20>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm_cd: pwm@1a000 {
+ compatible = "amlogic,meson-axg-ee-pwm";
+ reg = <0x0 0x1a000 0x0 0x20>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ spicc0: spi@13000 {
+ compatible = "amlogic,meson-axg-spicc";
+ reg = <0x0 0x13000 0x0 0x3c>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC0>;
+ clock-names = "core";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spicc1: spi@15000 {
+ compatible = "amlogic,meson-axg-spicc";
+ reg = <0x0 0x15000 0x0 0x3c>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC1>;
+ clock-names = "core";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@1c000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x1c000 0x0 0x20>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@1d000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x1d000 0x0 0x20>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@1e000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x1e000 0x0 0x20>;
+ interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@1f000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x1f000 0x0 0x20>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart_B: serial@23000 {
+ compatible = "amlogic,meson-gx-uart";
+ reg = <0x0 0x23000 0x0 0x18>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ };
+
+ uart_A: serial@24000 {
+ compatible = "amlogic,meson-gx-uart";
+ reg = <0x0 0x24000 0x0 0x18>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ };
+ };
+
+ apb: bus@ffe00000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xffe00000 0x0 0x200000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
+
+ sd_emmc_b: sd@5000 {
+ compatible = "amlogic,meson-axg-mmc";
+ reg = <0x0 0x5000 0x0 0x800>;
+ interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&clkc CLKID_SD_EMMC_B>,
+ <&clkc CLKID_SD_EMMC_B_CLK0>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_B>;
+ };
+
+ sd_emmc_c: mmc@7000 {
+ compatible = "amlogic,meson-axg-mmc";
+ reg = <0x0 0x7000 0x0 0x800>;
+ interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&clkc CLKID_SD_EMMC_C>,
+ <&clkc CLKID_SD_EMMC_C_CLK0>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_C>;
+ };
+ };
+
+ sram: sram@fffc0000 {
+ compatible = "amlogic,meson-axg-sram", "mmio-sram";
+ reg = <0x0 0xfffc0000 0x0 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0xfffc0000 0x20000>;
+
+ cpu_scp_lpri: scp-shmem@0 {
+ compatible = "amlogic,meson-axg-scp-shmem";
+ reg = <0x13000 0x400>;
+ };
+
+ cpu_scp_hpri: scp-shmem@200 {
+ compatible = "amlogic,meson-axg-scp-shmem";
+ reg = <0x13400 0x400>;
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
new file mode 100644
index 000000000000..c44dbdddf2cf
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+
+/ {
+ compatible = "amlogic,u200", "amlogic,g12a";
+ model = "Amlogic Meson G12A U200 Development Board";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+};
+
+&uart_AO {
+ status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
new file mode 100644
index 000000000000..3b82a975c663
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "amlogic,g12a";
+
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <0x2>;
+ #size-cells = <0x0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 3 MiB reserved for ARM Trusted Firmware (BL31) */
+ secmon_reserved: secmon@5000000 {
+ reg = <0x0 0x05000000 0x0 0x300000>;
+ no-map;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ periphs: periphs@ff634000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff634000 0x0 0x2000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
+ };
+
+ hiubus: bus@ff63c000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff63c000 0x0 0x1c00>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+ };
+
+ aobus: bus@ff800000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff800000 0x0 0x100000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
+
+ uart_AO: serial@3000 {
+ compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+ reg = <0x0 0x3000 0x0 0x18>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&xtal>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
+ };
+
+ uart_AO_B: serial@4000 {
+ compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+ reg = <0x0 0x4000 0x0 0x18>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&xtal>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
+ };
+ };
+
+ gic: interrupt-controller@ffc01000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xffc01000 0 0x1000>,
+ <0x0 0xffc02000 0 0x2000>,
+ <0x0 0xffc04000 0 0x2000>,
+ <0x0 0xffc06000 0 0x2000>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ };
+
+ cbus: bus@ffd00000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xffd00000 0x0 0x25000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
+ };
+
+ apb: apb@ffe00000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xffe00000 0x0 0x200000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index b8dc4dbb391b..f1e5cdbade5e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -44,7 +44,7 @@
linux,cma {
compatible = "shared-dma-pool";
reusable;
- size = <0x0 0xbc00000>;
+ size = <0x0 0x10000000>;
alignment = <0x0 0x400000>;
linux,cma-default;
};
@@ -344,7 +344,7 @@
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
sysctrl_AO: sys-ctrl@0 {
- compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+ compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
reg = <0x0 0x0 0x0 0x100>;
pwrc_vpu: power-controller-vpu {
@@ -423,6 +423,19 @@
};
};
+ dmcbus: bus@c8838000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xc8838000 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>;
+
+ canvas: video-lut@48 {
+ compatible = "amlogic,canvas";
+ reg = <0x0 0x48 0x0 0x14>;
+ };
+ };
+
hiubus: bus@c883c000 {
compatible = "simple-bus";
reg = <0x0 0xc883c000 0x0 0x2000>;
@@ -431,7 +444,7 @@
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
sysctrl: system-controller@0 {
- compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd";
+ compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
reg = <0 0 0 0x400>;
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 98cbba6809ca..1ade7e486828 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -390,7 +390,7 @@
};
};
- spi_pins: spi {
+ spi_pins: spi-pins {
mux {
groups = "spi_miso",
"spi_mosi",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index f63bceb88caa..90a56af967a7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -13,7 +13,7 @@
/ {
compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
- model = "Libre Technology CC";
+ model = "Libre Computer Board AML-S905X-CC";
aliases {
serial0 = &uart_AO;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index c87a80e9bcc6..8f0bb3c44bd6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -337,7 +337,7 @@
};
};
- spi_pins: spi {
+ spi_pins: spi-pins {
mux {
groups = "spi_miso",
"spi_mosi",
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index ce56a4acda4f..ed774ee8f659 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -115,22 +115,17 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- /* input port */
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf0_in_port: endpoint {
- slave-mode;
remote-endpoint = <&main_funnel_out_port>;
};
};
+ };
- /* output port */
- port@1 {
- reg = <0>;
+ out-ports {
+ port {
etf0_out_port: endpoint {
};
};
@@ -144,10 +139,11 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
@@ -160,31 +156,29 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- /* output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
main_funnel_out_port: endpoint {
remote-endpoint = <&etf0_in_port>;
};
};
+ };
- /* input ports */
- port@1 {
+ main_funnel_in_ports: in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
main_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&cluster0_funnel_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
main_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&cluster1_funnel_out_port>;
};
};
@@ -199,10 +193,12 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- etr_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ arm,scatter-gather;
+ in-ports {
+ port {
+ etr_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
@@ -216,8 +212,10 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- stm_out_port: endpoint {
+ out-ports {
+ port {
+ stm_out_port: endpoint {
+ };
};
};
};
@@ -238,9 +236,11 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster0_etm0_out_port: endpoint {
- remote-endpoint = <&cluster0_funnel_in_port0>;
+ out-ports {
+ port {
+ cluster0_etm0_out_port: endpoint {
+ remote-endpoint = <&cluster0_funnel_in_port0>;
+ };
};
};
};
@@ -252,29 +252,28 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster0_funnel_out_port: endpoint {
remote-endpoint = <&main_funnel_in_port0>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
cluster0_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&cluster0_etm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
cluster0_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&cluster0_etm1_out_port>;
};
};
@@ -297,9 +296,11 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster0_etm1_out_port: endpoint {
- remote-endpoint = <&cluster0_funnel_in_port1>;
+ out-ports {
+ port {
+ cluster0_etm1_out_port: endpoint {
+ remote-endpoint = <&cluster0_funnel_in_port1>;
+ };
};
};
};
@@ -320,9 +321,11 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster1_etm0_out_port: endpoint {
- remote-endpoint = <&cluster1_funnel_in_port0>;
+ out-ports {
+ port {
+ cluster1_etm0_out_port: endpoint {
+ remote-endpoint = <&cluster1_funnel_in_port0>;
+ };
};
};
};
@@ -334,43 +337,40 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster1_funnel_out_port: endpoint {
remote-endpoint = <&main_funnel_in_port1>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
cluster1_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&cluster1_etm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
cluster1_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&cluster1_etm1_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
cluster1_funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&cluster1_etm2_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
cluster1_funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&cluster1_etm3_out_port>;
};
};
@@ -393,9 +393,11 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster1_etm1_out_port: endpoint {
- remote-endpoint = <&cluster1_funnel_in_port1>;
+ out-ports {
+ port {
+ cluster1_etm1_out_port: endpoint {
+ remote-endpoint = <&cluster1_funnel_in_port1>;
+ };
};
};
};
@@ -416,9 +418,11 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster1_etm2_out_port: endpoint {
- remote-endpoint = <&cluster1_funnel_in_port2>;
+ out-ports {
+ port {
+ cluster1_etm2_out_port: endpoint {
+ remote-endpoint = <&cluster1_funnel_in_port2>;
+ };
};
};
};
@@ -439,9 +443,11 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster1_etm3_out_port: endpoint {
- remote-endpoint = <&cluster1_funnel_in_port3>;
+ out-ports {
+ port {
+ cluster1_etm3_out_port: endpoint {
+ remote-endpoint = <&cluster1_funnel_in_port3>;
+ };
};
};
};
@@ -454,7 +460,7 @@
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -472,12 +478,10 @@
remote-endpoint = <&etr_in_port>;
};
};
-
- /* replicator input port */
- port@2 {
- reg = <0>;
+ };
+ in-ports {
+ port {
replicator_in_port0: endpoint {
- slave-mode;
};
};
};
diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
index 0c43fb3525eb..cf285152deab 100644
--- a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
@@ -7,23 +7,16 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
csys1_funnel_out_port: endpoint {
remote-endpoint = <&etf1_in_port>;
};
};
-
- /* input port */
- port@1 {
- reg = <0>;
+ };
+ in-ports {
+ port {
csys1_funnel_in_port0: endpoint {
- slave-mode;
};
};
@@ -37,22 +30,15 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* input port */
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf1_in_port: endpoint {
- slave-mode;
remote-endpoint = <&csys1_funnel_out_port>;
};
};
-
- /* output port */
- port@1 {
- reg = <0>;
+ };
+ out-ports {
+ port {
etf1_out_port: endpoint {
remote-endpoint = <&csys2_funnel_in_port1>;
};
@@ -67,20 +53,18 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
csys2_funnel_out_port: endpoint {
remote-endpoint = <&replicator_in_port0>;
};
};
+ };
- /* input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
reg = <0>;
csys2_funnel_in_port0: endpoint {
slave-mode;
@@ -88,7 +72,7 @@
};
};
- port@2 {
+ port@1 {
reg = <1>;
csys2_funnel_in_port1: endpoint {
slave-mode;
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index 1fb5c5a0f32e..08d4ba1716c3 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -257,14 +257,11 @@
remote-endpoint = <&main_funnel_in_port2>;
};
-&main_funnel {
- ports {
- port@3 {
- reg = <2>;
- main_funnel_in_port2: endpoint {
- slave-mode;
- remote-endpoint = <&stm_out_port>;
- };
+&main_funnel_in_ports {
+ port@2 {
+ reg = <2>;
+ main_funnel_in_port2: endpoint {
+ remote-endpoint = <&stm_out_port>;
};
};
};
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index 1193a9e34bbb..667ca989c11b 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \
- bcm2837-rpi-3-b-plus.dtb
+ bcm2837-rpi-3-b-plus.dtb \
+ bcm2837-rpi-cm3-io3.dtb
subdir-y += northstar2
subdir-y += stingray
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
new file mode 100644
index 000000000000..b1c4ab212c64
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/bcm2837-rpi-cm3-io3.dts"
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 1a406a76c86a..ea854f689fda 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -639,7 +639,7 @@
status = "disabled";
};
- ssp0: ssp@66180000 {
+ ssp0: spi@66180000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x66180000 0x1000>;
interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
@@ -650,7 +650,7 @@
status = "disabled";
};
- ssp1: ssp@66190000 {
+ ssp1: spi@66190000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x66190000 0x1000>;
interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index bc299c3d9068..a9b92e52d50e 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -138,7 +138,7 @@
&i2c1 {
status = "okay";
- pcf8574: pcf8574@20 {
+ pcf8574: pcf8574@27 {
compatible = "nxp,pcf8574a";
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index e283480bfc7e..cfeaa855bd05 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -521,7 +521,7 @@
status = "disabled";
};
- ssp0: ssp@180000 {
+ ssp0: spi@180000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x00180000 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
@@ -533,7 +533,7 @@
status = "disabled";
};
- ssp1: ssp@190000 {
+ ssp1: spi@190000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x00190000 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index a1e3194b7483..f3ed4c078ba5 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -868,6 +868,14 @@
};
};
};
+
+ ports {
+ port {
+ muic_to_usb: endpoint {
+ remote-endpoint = <&usb_to_muic>;
+ };
+ };
+ };
};
regulators {
@@ -939,8 +947,7 @@
status = "okay";
cap-sd-highspeed;
disable-wp;
- cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
@@ -1283,12 +1290,17 @@
&usbdrd_dwc3 {
dr_mode = "otg";
- extcon = <&muic>;
};
&usbdrd30_phy {
vbus-supply = <&safeout1_reg>;
status = "okay";
+
+ port {
+ usb_to_muic: endpoint {
+ remote-endpoint = <&muic_to_usb>;
+ };
+ };
};
&xxti {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 68ac78c4564d..5da732f82fa0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -337,7 +337,7 @@
status = "disabled";
};
- dspi: dspi@2100000 {
+ dspi: spi@2100000 {
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index c7b8d2c009cd..dff3d648172e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -3,6 +3,7 @@
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*/
@@ -50,6 +51,7 @@
nor@0,0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
+ big-endian;
bank-width = <2>;
device-width = <1>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index 7b01ba8d3b7e..17ca357e854f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -3,6 +3,7 @@
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*/
@@ -65,6 +66,7 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x0 0x8000000>;
+ big-endian;
bank-width = <2>;
device-width = <1>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 7881e3d81a9a..3fed504b5381 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -3,6 +3,7 @@
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*/
@@ -280,11 +281,10 @@
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
- big-endian;
interrupts = <0 43 0x4>;
};
- qspi: quadspi@1550000 {
+ qspi: spi@1550000 {
compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -382,7 +382,7 @@
ranges = <0x0 0x5 0x00000000 0x8000000>;
};
- dspi0: dspi@2100000 {
+ dspi0: spi@2100000 {
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -395,7 +395,7 @@
status = "disabled";
};
- dspi1: dspi@2110000 {
+ dspi1: spi@2110000 {
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index e69306e6b0b1..e58a8ca1386c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -3,6 +3,7 @@
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* Shaohui Xie <Shaohui.Xie@nxp.com>
*/
@@ -141,6 +142,7 @@
nor@0,0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
+ big-endian;
bank-width = <2>;
device-width = <1>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 440e111651d5..a59b48203688 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -57,12 +57,12 @@
reg = <0x4c>;
};
- eeprom@56 {
+ eeprom@52 {
compatible = "atmel,24c512";
reg = <0x52>;
};
- eeprom@57 {
+ eeprom@53 {
compatible = "atmel,24c512";
reg = <0x53>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index ef83786b8b90..51cbd50012d6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -3,6 +3,7 @@
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* Mingkai Hu <mingkai.hu@nxp.com>
*/
@@ -198,11 +199,10 @@
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
- big-endian;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
};
- qspi: quadspi@1550000 {
+ qspi: spi@1550000 {
compatible = "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -361,7 +361,7 @@
#thermal-sensor-cells = <1>;
};
- dspi: dspi@2100000 {
+ dspi: spi@2100000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 90c0faf8579f..d188774a36e8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -22,6 +22,8 @@
crypto = &crypto;
serial0 = &serial0;
serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
};
cpu: cpus {
@@ -222,6 +224,20 @@
interrupts = <0 32 0x4>; /* Level high type */
};
+ serial2: serial@21d0500 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21d0500 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 33 0x4>; /* Level high type */
+ };
+
+ serial3: serial@21d0600 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21d0600 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 33 0x4>; /* Level high type */
+ };
+
cluster1_core0_watchdog: wdt@c000000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
@@ -474,7 +490,7 @@
<0 208 4>, <0 209 4>;
};
- dspi: dspi@2100000 {
+ dspi: spi@2100000 {
status = "disabled";
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
#address-cells = <1>;
@@ -600,7 +616,7 @@
3 0 0x5 0x20000000 0x00010000>;
};
- qspi: quadspi@20c0000 {
+ qspi: spi@20c0000 {
status = "disabled";
compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
index 03d93f8ef8a9..f4d68caeba83 100644
--- a/arch/arm64/boot/dts/hisilicon/Makefile
+++ b/arch/arm64/boot/dts/hisilicon/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi3670-hikey970.dtb
dtb-$(CONFIG_ARCH_HISI) += hi3798cv200-poplar.dtb
dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
new file mode 100644
index 000000000000..4f5118642024
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon HiKey970 Development Board
+ *
+ * Copyright (C) 2016, Hisilicon Ltd.
+ * Copyright (C) 2018, Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "hi3670.dtsi"
+
+/ {
+ model = "HiKey970";
+ compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
+
+ aliases {
+ serial6 = &uart6; /* console UART */
+ };
+
+ chosen {
+ stdout-path = "serial6:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ /* expect bootloader to fill in this region */
+ reg = <0x0 0x0 0x0 0x0>;
+ };
+};
+
+&uart6 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
new file mode 100644
index 000000000000..c90e6f6a34ec
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon Hi3670 SoC
+ *
+ * Copyright (C) 2016, Hisilicon Ltd.
+ * Copyright (C) 2018, Linaro Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "hisilicon,hi3670";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+
+ cpu4: cpu@100 {
+ compatible = "arm,cortex-a73", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ };
+
+ cpu5: cpu@101 {
+ compatible = "arm,cortex-a73", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ };
+
+ cpu6: cpu@102 {
+ compatible = "arm,cortex-a73", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ };
+
+ cpu7: cpu@103 {
+ compatible = "arm,cortex-a73", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ };
+ };
+
+ gic: interrupt-controller@e82b0000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */
+ <0x0 0xe82b2000 0 0x2000>, /* GICC */
+ <0x0 0xe82b4000 0 0x2000>, /* GICH */
+ <0x0 0xe82b6000 0 0x2000>; /* GICV */
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-controller;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <1920000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ uart6_clk: clk_19_2M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+
+ uart6: serial@fff32000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfff32000 0x0 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart6_clk &uart6_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
index 7afee5d5087b..68c52f1149be 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
@@ -20,22 +20,18 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
soc_funnel_out: endpoint {
remote-endpoint =
<&etf_in>;
};
};
+ };
- port@1 {
- reg = <0>;
+ in-ports {
+ port {
soc_funnel_in: endpoint {
- slave-mode;
remote-endpoint =
<&acpu_funnel_out>;
};
@@ -49,21 +45,17 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf_in: endpoint {
- slave-mode;
remote-endpoint =
<&soc_funnel_out>;
};
};
+ };
- port@1 {
- reg = <0>;
+ out-ports {
+ port {
etf_out: endpoint {
remote-endpoint =
<&replicator_in>;
@@ -77,20 +69,20 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
replicator_in: endpoint {
- slave-mode;
remote-endpoint =
<&etf_out>;
};
};
+ };
- port@1 {
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
replicator_out0: endpoint {
remote-endpoint =
@@ -98,7 +90,7 @@
};
};
- port@2 {
+ port@1 {
reg = <1>;
replicator_out1: endpoint {
remote-endpoint =
@@ -114,14 +106,9 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etr_in: endpoint {
- slave-mode;
remote-endpoint =
<&replicator_out0>;
};
@@ -135,14 +122,9 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
tpiu_in: endpoint {
- slave-mode;
remote-endpoint =
<&replicator_out1>;
};
@@ -156,85 +138,78 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
acpu_funnel_out: endpoint {
remote-endpoint =
<&soc_funnel_in>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
acpu_funnel_in0: endpoint {
- slave-mode;
remote-endpoint =
<&etm0_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
acpu_funnel_in1: endpoint {
- slave-mode;
remote-endpoint =
<&etm1_out>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
acpu_funnel_in2: endpoint {
- slave-mode;
remote-endpoint =
<&etm2_out>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
acpu_funnel_in3: endpoint {
- slave-mode;
remote-endpoint =
<&etm3_out>;
};
};
- port@5 {
+ port@4 {
reg = <4>;
acpu_funnel_in4: endpoint {
- slave-mode;
remote-endpoint =
<&etm4_out>;
};
};
- port@6 {
+ port@5 {
reg = <5>;
acpu_funnel_in5: endpoint {
- slave-mode;
remote-endpoint =
<&etm5_out>;
};
};
- port@7 {
+ port@6 {
reg = <6>;
acpu_funnel_in6: endpoint {
- slave-mode;
remote-endpoint =
<&etm6_out>;
};
};
- port@8 {
+ port@7 {
reg = <7>;
acpu_funnel_in7: endpoint {
- slave-mode;
remote-endpoint =
<&etm7_out>;
};
@@ -251,10 +226,12 @@
cpu = <&cpu0>;
- port {
- etm0_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in0>;
+ };
};
};
};
@@ -268,10 +245,12 @@
cpu = <&cpu1>;
- port {
- etm1_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in1>;
+ };
};
};
};
@@ -285,10 +264,12 @@
cpu = <&cpu2>;
- port {
- etm2_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in2>;
+ };
};
};
};
@@ -302,10 +283,12 @@
cpu = <&cpu3>;
- port {
- etm3_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in3>;
+ };
};
};
};
@@ -319,10 +302,12 @@
cpu = <&cpu4>;
- port {
- etm4_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in4>;
+ out-ports {
+ port {
+ etm4_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in4>;
+ };
};
};
};
@@ -336,10 +321,12 @@
cpu = <&cpu5>;
- port {
- etm5_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in5>;
+ out-ports {
+ port {
+ etm5_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in5>;
+ };
};
};
};
@@ -353,10 +340,12 @@
cpu = <&cpu6>;
- port {
- etm6_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in6>;
+ out-ports {
+ port {
+ etm6_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in6>;
+ };
};
};
};
@@ -370,10 +359,12 @@
cpu = <&cpu7>;
- port {
- etm7_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in7>;
+ out-ports {
+ port {
+ etm7_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in7>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 247024df714f..97d5bf2c6ec5 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -99,6 +99,7 @@
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
@@ -111,6 +112,7 @@
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
@@ -123,6 +125,7 @@
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
@@ -135,6 +138,7 @@
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
@@ -147,6 +151,7 @@
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
@@ -159,6 +164,7 @@
reg = <0x0 0x102>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
@@ -171,6 +177,7 @@
reg = <0x0 0x103>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
index 860c8fb10795..4bde7b6f2b11 100644
--- a/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -168,14 +168,14 @@
clock-names = "apb_pclk";
status="disabled";
};
- spi0: ssp@fe800000 {
+ spi0: spi@fe800000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe800000 0x1000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
};
- spi1: ssp@fe900000 {
+ spi1: spi@fe900000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe900000 0x1000>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi
index 1887af654a7d..16ced1ff1ad3 100644
--- a/arch/arm64/boot/dts/lg/lg1313.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -168,14 +168,14 @@
clock-names = "apb_pclk";
status="disabled";
};
- spi0: ssp@fe800000 {
+ spi0: spi@fe800000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe800000 0x1000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
};
- spi1: ssp@fe900000 {
+ spi1: spi@fe900000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe900000 0x1000>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index ea9d49f2a911..eca8bac6303a 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -3,6 +3,7 @@
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb
diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
index 97558a64e276..6800945a88ad 100644
--- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
@@ -16,7 +16,7 @@
compatible = "marvell,armada3720", "marvell,armada3710";
cpus {
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53","arm,armv8";
reg = <0x1>;
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index d9531e242eb4..4472bcd8f9fb 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -40,7 +40,7 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0>;
@@ -80,6 +80,19 @@
/* 32M internal register @ 0xd000_0000 */
ranges = <0x0 0x0 0xd0000000 0x2000000>;
+ wdt: watchdog@8300 {
+ compatible = "marvell,armada-3700-wdt";
+ reg = <0x8300 0x40>;
+ marvell,system-controller = <&cpu_misc>;
+ clocks = <&xtalclk>;
+ };
+
+ cpu_misc: system-controller@d000 {
+ compatible = "marvell,armada-3700-cpu-misc",
+ "syscon";
+ reg = <0xd000 0x1000>;
+ };
+
spi0: spi@10600 {
compatible = "marvell,armada-3700-spi";
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
new file mode 100644
index 000000000000..9473d40a292a
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -0,0 +1,441 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 SolidRun ltd.
+ * Based on Marvell MACCHIATOBin board
+ *
+ * Device Tree file for SolidRun's ClearFog GT 8K
+ */
+
+#include "armada-8040.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "SolidRun ClearFog GT 8K";
+ compatible = "solidrun,clearfog-gt-8k", "marvell,armada8040",
+ "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ aliases {
+ ethernet0 = &cp1_eth1;
+ ethernet1 = &cp0_eth0;
+ ethernet2 = &cp1_eth2;
+ };
+
+ v_3_3: regulator-3-3v {
+ compatible = "regulator-fixed";
+ regulator-name = "v_3_3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ status = "okay";
+ };
+
+ v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
+ compatible = "regulator-fixed";
+ gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_xhci_vbus_pins>;
+ regulator-name = "v_5v0_usb3_hst_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ status = "okay";
+ };
+
+ usb3h0_phy: usb3_phy0 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&v_5v0_usb3_hst_vbus>;
+ };
+
+ sfp_cp0_eth0: sfp-cp0-eth0 {
+ compatible = "sff,sfp";
+ i2c-bus = <&cp0_i2c1>;
+ mod-def0-gpio = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&cp0_led0_pins
+ &cp0_led1_pins>;
+ pinctrl-names = "default";
+ /* No designated function for these LEDs at the moment */
+ led0 {
+ label = "clearfog-gt-8k:green:led0";
+ gpios = <&cp0_gpio2 8 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ led1 {
+ label = "clearfog-gt-8k:green:led1";
+ gpios = <&cp0_gpio2 9 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>;
+ pinctrl-names = "default";
+
+ button_0 {
+ /* The rear button */
+ label = "Rear Button";
+ gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>;
+ linux,can-disable;
+ linux,code = <BTN_0>;
+ };
+
+ button_1 {
+ /* The wps button */
+ label = "WPS Button";
+ gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>;
+ linux,can-disable;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+&ap_sdhci0 {
+ bus-width = <8>;
+ no-1-8-v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+ vqmmc-supply = <&v_3_3>;
+};
+
+&cp0_i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ status = "okay";
+};
+
+&cp0_i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c1_pins>;
+ status = "okay";
+};
+
+&cp0_pinctrl {
+ /*
+ * MPP Bus:
+ * [0-31] = 0xff: Keep default CP0_shared_pins:
+ * [11] CLKOUT_MPP_11 (out)
+ * [23] LINK_RD_IN_CP2CP (in)
+ * [25] CLKOUT_MPP_25 (out)
+ * [29] AVS_FB_IN_CP2CP (in)
+ * [32, 33, 34] pci0/1/2 reset
+ * [35-38] CP0 I2C1 and I2C0
+ * [39] GPIO reset button
+ * [40,41] LED0 and LED1
+ * [43] 1512 phy reset
+ * [47] USB VBUS EN (active low)
+ * [48] FAN PWM
+ * [49] SFP+ present signal
+ * [50] TPM interrupt
+ * [51] WLAN0 disable
+ * [52] WLAN1 disable
+ * [53] LTE disable
+ * [54] NFC reset
+ * [55] Micro SD card detect
+ * [56-61] Micro SD
+ */
+
+ cp0_pci0_reset_pins: pci0-reset-pins {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+
+ cp0_pci1_reset_pins: pci1-reset-pins {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+
+ cp0_pci2_reset_pins: pci2-reset-pins {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+
+ cp0_i2c1_pins: i2c1-pins {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+
+ cp0_i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+
+ cp0_gpio_reset_pins: gpio-reset-pins {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+
+ cp0_led0_pins: led0-pins {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ cp0_led1_pins: led1-pins {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ cp0_copper_eth_phy_reset: copper-eth-phy-reset {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+
+ cp0_xhci_vbus_pins: xhci0-vbus-pins {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+
+ cp0_fan_pwm_pins: fan-pwm-pins {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+
+ cp0_sfp_present_pins: sfp-present-pins {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+
+ cp0_tpm_irq_pins: tpm-irq-pins {
+ marvell,pins = "mpp50";
+ marvell,function = "gpio";
+ };
+
+ cp0_sdhci_pins: sdhci-pins {
+ marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+ "mpp60", "mpp61";
+ marvell,function = "sdio";
+ };
+};
+
+&cp0_pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_pci0_reset_pins>;
+ reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&cp0_gpio2 {
+ sata_reset {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+/* SFP */
+&cp0_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+ managed = "in-band-status";
+ phys = <&cp0_comphy2 0>;
+ sfp = <&sfp_cp0_eth0>;
+};
+
+&cp0_sdhci0 {
+ broken-cd;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sdhci_pins>;
+ status = "okay";
+ vqmmc-supply = <&v_3_3>;
+};
+
+&cp1_pinctrl {
+ /*
+ * MPP Bus:
+ * [0-5] TDM
+ * [6] VHV Enable
+ * [7] CP1 SPI0 CSn1 (FXS)
+ * [8] CP1 SPI0 CSn0 (TPM)
+ * [9.11]CP1 SPI0 MOSI/MISO/CLK
+ * [13] CP1 SPI1 MISO (TDM and SPI ROM shared)
+ * [14] CP1 SPI1 CS0n (64Mb SPI ROM)
+ * [15] CP1 SPI1 MOSI (TDM and SPI ROM shared)
+ * [16] CP1 SPI1 CLK (TDM and SPI ROM shared)
+ * [24] Topaz switch reset
+ * [26] Buzzer
+ * [27] CP1 SMI MDIO
+ * [28] CP1 SMI MDC
+ * [29] CP0 10G SFP TX Disable
+ * [30] WPS button
+ * [31] Front panel button
+ */
+
+ cp1_spi1_pins: spi1-pins {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+
+ cp1_switch_reset_pins: switch-reset-pins {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ cp1_ge_mdio_pins: ge-mdio-pins {
+ marvell,pins = "mpp27", "mpp28";
+ marvell,function = "ge";
+ };
+
+ cp1_sfp_tx_disable_pins: sfp-tx-disable-pins {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ cp1_wps_button_pins: wps-button-pins {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
+};
+
+&cp1_sata0 {
+ pinctrl-0 = <&cp0_pci1_reset_pins>;
+ status = "okay";
+};
+
+&cp1_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_ge_mdio_pins>;
+ status = "okay";
+
+ ge_phy: ethernet-phy@0 {
+ /* LED0 - GB link
+ * LED1 - on: link, blink: activity
+ */
+ marvell,reg-init = <3 16 0 0x1017>;
+ reg = <0>;
+ };
+
+ switch0: switch0@4 {
+ compatible = "marvell,mv88e6085";
+ reg = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_switch_reset_pins>;
+ reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ phy-handle = <&switch0phy0>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan1";
+ phy-handle = <&switch0phy1>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ phy-handle = <&switch0phy2>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan3";
+ phy-handle = <&switch0phy3>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&cp1_eth2>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy0: switch0phy0@11 {
+ reg = <0x11>;
+ };
+
+ switch0phy1: switch0phy1@12 {
+ reg = <0x12>;
+ };
+
+ switch0phy2: switch0phy2@13 {
+ reg = <0x13>;
+ };
+
+ switch0phy3: switch0phy3@14 {
+ reg = <0x14>;
+ };
+ };
+ };
+};
+
+&cp1_ethernet {
+ status = "okay";
+};
+
+/* 1G copper */
+&cp1_eth1 {
+ status = "okay";
+ phy-mode = "sgmii";
+ phy = <&ge_phy>;
+ phys = <&cp1_comphy3 1>;
+};
+
+/* Switch uplink */
+&cp1_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy5 2>;
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+};
+
+&cp1_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_spi1_pins>;
+ status = "okay";
+
+ spi-flash@0 {
+ compatible = "st,w25q32";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+};
+
+&cp1_usb3_0 {
+ usb-phy = <&usb3h0_phy>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
index 64b5e61a698e..d3c0636558ff 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -15,13 +15,13 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
index 746e792767f5..64632c873888 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -15,29 +15,33 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
- cpu@100 {
+ cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x100>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
- cpu@101 {
+ cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x101>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 176e38d54872..073610ac0a53 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -6,6 +6,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
/dts-v1/;
@@ -27,6 +28,33 @@
method = "smc";
};
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ idle_states {
+ entry_method = "arm,pcsi";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <80>;
+ exit-latency-us = <160>;
+ min-residency-us = <320>;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <500>;
+ exit-latency-us = <1000>;
+ min-residency-us = <2500>;
+ };
+ };
+ };
+
ap806 {
#address-cells = <2>;
#size-cells = <2>;
@@ -124,6 +152,15 @@
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
+ sei: interrupt-controller@3f0200 {
+ compatible = "marvell,ap806-sei";
+ reg = <0x3f0200 0x40>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ msi-controller;
+ };
+
xor@400000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x400000 0x1000>,
@@ -247,11 +284,76 @@
};
};
- ap_thermal: thermal@6f808c {
- compatible = "marvell,armada-ap806-thermal";
- reg = <0x6f808c 0x4>,
- <0x6f8084 0x8>;
+ ap_syscon1: system-controller@6f8000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x6f8000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ap_thermal: thermal-sensor@80 {
+ compatible = "marvell,armada-ap806-thermal";
+ reg = <0x80 0x10>;
+ #thermal-sensor-cells = <1>;
+ };
};
};
};
+
+ /*
+ * The thermal IP features one internal sensor plus, if applicable, one
+ * remote channel wired to one sensor per CPU.
+ *
+ * The cooling maps are always empty as there are no cooling devices.
+ */
+ thermal-zones {
+ ap_thermal_ic: ap-thermal-ic {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 0>;
+
+ trips { };
+ cooling-maps { };
+ };
+
+ ap_thermal_cpu1: ap-thermal-cpu1 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 1>;
+
+ trips { };
+ cooling-maps { };
+ };
+
+ ap_thermal_cpu2: ap-thermal-cpu2 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 2>;
+
+ trips { };
+ cooling-maps { };
+ };
+
+ ap_thermal_cpu3: ap-thermal-cpu3 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 3>;
+
+ trips { };
+ cooling-maps { };
+ };
+
+ ap_thermal_cpu4: ap-thermal-cpu4 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 4>;
+
+ trips { };
+ cooling-maps { };
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
index 7d00ae78fc79..b788cb63caf2 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
@@ -13,49 +13,49 @@
#size-cells = <0>;
compatible = "marvell,armada-ap810-octa";
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
enable-method = "psci";
};
- cpu@100 {
+ cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x100>;
enable-method = "psci";
};
- cpu@101 {
+ cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x101>;
enable-method = "psci";
};
- cpu@200 {
+ cpu4: cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x200>;
enable-method = "psci";
};
- cpu@201 {
+ cpu5: cpu@201 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x201>;
enable-method = "psci";
};
- cpu@300 {
+ cpu6: cpu@300 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x300>;
enable-method = "psci";
};
- cpu@301 {
+ cpu7: cpu@301 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x301>;
diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi
index d5e8aedec188..b29c6405d214 100644
--- a/arch/arm64/boot/dts/marvell/armada-common.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi
@@ -7,4 +7,5 @@
#define PASTER(x, y) x ## y
#define EVALUATOR(x, y) PASTER(x, y)
#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name))
+#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name))
#define ADDRESSIFY(addr) EVALUATOR(0x, addr)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index 840c8454d03e..b9d9f31e3ba1 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -6,6 +6,7 @@
*/
#include <dt-bindings/interrupt-controller/mvebu-icu.h>
+#include <dt-bindings/thermal/thermal.h>
#include "armada-common.dtsi"
@@ -19,13 +20,30 @@
* save one indentation level
*/
CP110_NAME: CP110_NAME { };
+
+ /*
+ * CPs only have one sensor in the thermal IC.
+ *
+ * The cooling maps are empty as there are no cooling devices.
+ */
+ thermal-zones {
+ CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&CP110_LABEL(thermal) 0>;
+
+ trips { };
+ cooling-maps { };
+ };
+ };
};
&CP110_NAME {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
- interrupt-parent = <&CP110_LABEL(icu)>;
+ interrupt-parent = <&CP110_LABEL(icu_nsr)>;
ranges;
config-space@CP110_BASE {
@@ -47,42 +65,57 @@
dma-coherent;
CP110_LABEL(eth0): eth0 {
- interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
+ <43 IRQ_TYPE_LEVEL_HIGH>,
+ <47 IRQ_TYPE_LEVEL_HIGH>,
+ <51 IRQ_TYPE_LEVEL_HIGH>,
+ <55 IRQ_TYPE_LEVEL_HIGH>,
+ <59 IRQ_TYPE_LEVEL_HIGH>,
+ <63 IRQ_TYPE_LEVEL_HIGH>,
+ <67 IRQ_TYPE_LEVEL_HIGH>,
+ <71 IRQ_TYPE_LEVEL_HIGH>,
+ <129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
port-id = <0>;
gop-port-id = <0>;
status = "disabled";
};
CP110_LABEL(eth1): eth1 {
- interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
+ <44 IRQ_TYPE_LEVEL_HIGH>,
+ <48 IRQ_TYPE_LEVEL_HIGH>,
+ <52 IRQ_TYPE_LEVEL_HIGH>,
+ <56 IRQ_TYPE_LEVEL_HIGH>,
+ <60 IRQ_TYPE_LEVEL_HIGH>,
+ <64 IRQ_TYPE_LEVEL_HIGH>,
+ <68 IRQ_TYPE_LEVEL_HIGH>,
+ <72 IRQ_TYPE_LEVEL_HIGH>,
+ <128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
port-id = <1>;
gop-port-id = <2>;
status = "disabled";
};
CP110_LABEL(eth2): eth2 {
- interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
+ <45 IRQ_TYPE_LEVEL_HIGH>,
+ <49 IRQ_TYPE_LEVEL_HIGH>,
+ <53 IRQ_TYPE_LEVEL_HIGH>,
+ <57 IRQ_TYPE_LEVEL_HIGH>,
+ <61 IRQ_TYPE_LEVEL_HIGH>,
+ <65 IRQ_TYPE_LEVEL_HIGH>,
+ <69 IRQ_TYPE_LEVEL_HIGH>,
+ <73 IRQ_TYPE_LEVEL_HIGH>,
+ <127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
port-id = <2>;
gop-port-id = <3>;
status = "disabled";
@@ -150,22 +183,31 @@
CP110_LABEL(icu): interrupt-controller@1e0000 {
compatible = "marvell,cp110-icu";
reg = <0x1e0000 0x440>;
- #interrupt-cells = <3>;
- interrupt-controller;
- msi-parent = <&gicp>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ CP110_LABEL(icu_nsr): interrupt-controller@10 {
+ compatible = "marvell,cp110-icu-nsr";
+ reg = <0x10 0x20>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&gicp>;
+ };
+
+ CP110_LABEL(icu_sei): interrupt-controller@50 {
+ compatible = "marvell,cp110-icu-sei";
+ reg = <0x50 0x10>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&sei>;
+ };
};
CP110_LABEL(rtc): rtc@284000 {
compatible = "marvell,armada-8k-rtc";
reg = <0x284000 0x20>, <0x284080 0x24>;
reg-names = "rtc", "rtc-soc";
- interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- CP110_LABEL(thermal): thermal@400078 {
- compatible = "marvell,armada-cp110-thermal";
- reg = <0x400078 0x4>,
- <0x400070 0x8>;
+ interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
};
CP110_LABEL(syscon0): system-controller@440000 {
@@ -185,10 +227,10 @@
#gpio-cells = <2>;
gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
interrupt-controller;
- interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
+ <85 IRQ_TYPE_LEVEL_HIGH>,
+ <84 IRQ_TYPE_LEVEL_HIGH>,
+ <83 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -200,20 +242,33 @@
#gpio-cells = <2>;
gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>;
interrupt-controller;
- interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
+ <81 IRQ_TYPE_LEVEL_HIGH>,
+ <80 IRQ_TYPE_LEVEL_HIGH>,
+ <79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
+ CP110_LABEL(syscon1): system-controller@400000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x400000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ CP110_LABEL(thermal): thermal-sensor@70 {
+ compatible = "marvell,armada-cp110-thermal";
+ reg = <0x70 0x10>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
CP110_LABEL(usb3_0): usb3@500000 {
compatible = "marvell,armada-8k-xhci",
"generic-xhci";
reg = <0x500000 0x4000>;
dma-coherent;
- interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 22>,
<&CP110_LABEL(clk) 1 16>;
@@ -225,7 +280,7 @@
"generic-xhci";
reg = <0x510000 0x4000>;
dma-coherent;
- interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 23>,
<&CP110_LABEL(clk) 1 16>;
@@ -237,7 +292,7 @@
"generic-ahci";
reg = <0x540000 0x30000>;
dma-coherent;
- interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&CP110_LABEL(clk) 1 15>,
<&CP110_LABEL(clk) 1 16>;
status = "disabled";
@@ -290,7 +345,7 @@
reg = <0x701000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
@@ -302,7 +357,7 @@
reg = <0x701100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
@@ -313,7 +368,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x702000 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 122 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
@@ -325,7 +380,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x702100 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
@@ -337,7 +392,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x702200 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
@@ -349,7 +404,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x702300 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 125 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
@@ -368,7 +423,7 @@
reg = <0x720000 0x54>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 2>,
<&CP110_LABEL(clk) 1 17>;
@@ -380,7 +435,7 @@
compatible = "marvell,armada-8k-rng",
"inside-secure,safexcel-eip76";
reg = <0x760000 0x7d>;
- interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 25>,
<&CP110_LABEL(clk) 1 17>;
@@ -390,7 +445,7 @@
CP110_LABEL(sdhci0): sdhci@780000 {
compatible = "marvell,armada-cp110-sdhci";
reg = <0x780000 0x300>;
- interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "axi";
clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>;
dma-coherent;
@@ -400,12 +455,12 @@
CP110_LABEL(crypto): crypto@800000 {
compatible = "inside-secure,safexcel-eip197b";
reg = <0x800000 0x200000>;
- interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
+ <88 IRQ_TYPE_LEVEL_HIGH>,
+ <89 IRQ_TYPE_LEVEL_HIGH>,
+ <90 IRQ_TYPE_LEVEL_HIGH>,
+ <91 IRQ_TYPE_LEVEL_HIGH>,
+ <92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mem", "ring0", "ring1",
"ring2", "ring3", "eip";
clock-names = "core", "reg";
@@ -434,8 +489,8 @@
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>;
@@ -461,8 +516,8 @@
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
@@ -489,8 +544,8 @@
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 5b7fd6ad96e4..e8f952fb279b 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -5,4 +5,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 75cc0f7cc088..ee627a7c7b45 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -301,6 +301,17 @@
status = "disabled";
};
+ spis1: spi@10013000 {
+ compatible = "mediatek,mt2712-spi-slave";
+ reg = <0 0x10013000 0 0x100>;
+ interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_AO_SPI1>;
+ clock-names = "spi";
+ assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
+ status = "disabled";
+ };
+
apmixedsys: syscon@10209000 {
compatible = "mediatek,mt2712-apmixedsys", "syscon";
reg = <0 0x10209000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
new file mode 100644
index 000000000000..5d6005c9b097
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -0,0 +1,530 @@
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "mt7622.dtsi"
+#include "mt6380.dtsi"
+
+/ {
+ model = "Bananapi BPI-R64";
+ compatible = "bananapi,bpi-r64", "mediatek,mt7622";
+
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
+ };
+
+ cpus {
+ cpu@0 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+
+ cpu@1 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ factory {
+ label = "factory";
+ linux,code = <BTN_0>;
+ gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ green {
+ label = "bpi-r64:pio:green";
+ gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red {
+ label = "bpi-r64:pio:red";
+ gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ memory {
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&bch {
+ status = "disabled";
+};
+
+&btif {
+ status = "okay";
+};
+
+&cir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&irrx_pins>;
+ status = "okay";
+};
+
+&eth {
+ pinctrl-names = "default";
+ pinctrl-0 = <&eth_pins>;
+ status = "okay";
+
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-handle = <&phy5>;
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "sgmii";
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&emmc_pins_default>;
+ pinctrl-1 = <&emmc_pins_uhs>;
+ status = "okay";
+ bus-width = <8>;
+ max-frequency = <50000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_1p8v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+ non-removable;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&sd0_pins_default>;
+ pinctrl-1 = <&sd0_pins_uhs>;
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ r_smpl = <1>;
+ cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_3p3v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+};
+
+&nandc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&parallel_nand_pins>;
+ status = "disabled";
+};
+
+&nor_flash {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_nor_pins>;
+ status = "disabled";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;
+ status = "okay";
+
+ pcie@0,0 {
+ status = "okay";
+ };
+
+ pcie@1,0 {
+ status = "okay";
+ };
+};
+
+&pio {
+ /* Attention: GPIO 90 is used to switch between PCIe@1,0 and
+ * SATA functions. i.e. output-high: PCIe, output-low: SATA
+ */
+ asm_sel {
+ gpio-hog;
+ gpios = <90 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+
+ /* eMMC is shared pin with parallel NAND */
+ emmc_pins_default: emmc-pins-default {
+ mux {
+ function = "emmc", "emmc_rst";
+ groups = "emmc";
+ };
+
+ /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
+ * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
+ * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
+ */
+ conf-cmd-dat {
+ pins = "NDL0", "NDL1", "NDL2",
+ "NDL3", "NDL4", "NDL5",
+ "NDL6", "NDL7", "NRB";
+ input-enable;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "NCLE";
+ bias-pull-down;
+ };
+ };
+
+ emmc_pins_uhs: emmc-pins-uhs {
+ mux {
+ function = "emmc";
+ groups = "emmc";
+ };
+
+ conf-cmd-dat {
+ pins = "NDL0", "NDL1", "NDL2",
+ "NDL3", "NDL4", "NDL5",
+ "NDL6", "NDL7", "NRB";
+ input-enable;
+ drive-strength = <4>;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "NCLE";
+ drive-strength = <4>;
+ bias-pull-down;
+ };
+ };
+
+ eth_pins: eth-pins {
+ mux {
+ function = "eth";
+ groups = "mdc_mdio", "rgmii_via_gmac2";
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c1_0";
+ };
+ };
+
+ i2c2_pins: i2c2-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c2_0";
+ };
+ };
+
+ i2s1_pins: i2s1-pins {
+ mux {
+ function = "i2s";
+ groups = "i2s_out_mclk_bclk_ws",
+ "i2s1_in_data",
+ "i2s1_out_data";
+ };
+
+ conf {
+ pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
+ "I2S_WS", "I2S_MCLK";
+ drive-strength = <12>;
+ bias-pull-down;
+ };
+ };
+
+ irrx_pins: irrx-pins {
+ mux {
+ function = "ir";
+ groups = "ir_1_rx";
+ };
+ };
+
+ irtx_pins: irtx-pins {
+ mux {
+ function = "ir";
+ groups = "ir_1_tx";
+ };
+ };
+
+ /* Parallel nand is shared pin with eMMC */
+ parallel_nand_pins: parallel-nand-pins {
+ mux {
+ function = "flash";
+ groups = "par_nand";
+ };
+ };
+
+ pcie0_pins: pcie0-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie0_pad_perst",
+ "pcie0_1_waken",
+ "pcie0_1_clkreq";
+ };
+ };
+
+ pcie1_pins: pcie1-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie1_pad_perst",
+ "pcie1_0_waken",
+ "pcie1_0_clkreq";
+ };
+ };
+
+ pmic_bus_pins: pmic-bus-pins {
+ mux {
+ function = "pmic";
+ groups = "pmic_bus";
+ };
+ };
+
+ pwm7_pins: pwm1-2-pins {
+ mux {
+ function = "pwm";
+ groups = "pwm_ch7_2";
+ };
+ };
+
+ wled_pins: wled-pins {
+ mux {
+ function = "led";
+ groups = "wled";
+ };
+ };
+
+ sd0_pins_default: sd0-pins-default {
+ mux {
+ function = "sd";
+ groups = "sd_0";
+ };
+
+ /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
+ * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
+ * DAT2, DAT3, CMD, CLK for SD respectively.
+ */
+ conf-cmd-data {
+ pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+ "I2S2_IN","I2S4_OUT";
+ input-enable;
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ conf-clk {
+ pins = "I2S3_OUT";
+ drive-strength = <12>;
+ bias-pull-down;
+ };
+ conf-cd {
+ pins = "TXD3";
+ bias-pull-up;
+ };
+ };
+
+ sd0_pins_uhs: sd0-pins-uhs {
+ mux {
+ function = "sd";
+ groups = "sd_0";
+ };
+
+ conf-cmd-data {
+ pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+ "I2S2_IN","I2S4_OUT";
+ input-enable;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "I2S3_OUT";
+ bias-pull-down;
+ };
+ };
+
+ /* Serial NAND is shared pin with SPI-NOR */
+ serial_nand_pins: serial-nand-pins {
+ mux {
+ function = "flash";
+ groups = "snfi";
+ };
+ };
+
+ spic0_pins: spic0-pins {
+ mux {
+ function = "spi";
+ groups = "spic0_0";
+ };
+ };
+
+ spic1_pins: spic1-pins {
+ mux {
+ function = "spi";
+ groups = "spic1_0";
+ };
+ };
+
+ /* SPI-NOR is shared pin with serial NAND */
+ spi_nor_pins: spi-nor-pins {
+ mux {
+ function = "flash";
+ groups = "spi_nor";
+ };
+ };
+
+ /* serial NAND is shared pin with SPI-NOR */
+ serial_nand_pins: serial-nand-pins {
+ mux {
+ function = "flash";
+ groups = "snfi";
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ mux {
+ function = "uart";
+ groups = "uart0_0_tx_rx" ;
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ mux {
+ function = "uart";
+ groups = "uart2_1_tx_rx" ;
+ };
+ };
+
+ watchdog_pins: watchdog-pins {
+ mux {
+ function = "watchdog";
+ groups = "watchdog";
+ };
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm7_pins>;
+ status = "okay";
+};
+
+&pwrap {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_bus_pins>;
+
+ status = "okay";
+};
+
+&sata {
+ status = "disable";
+};
+
+&sata_phy {
+ status = "disable";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic0_pins>;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic1_pins>;
+ status = "okay";
+};
+
+&ssusb {
+ vusb33-supply = <&reg_3p3v>;
+ vbus-supply = <&reg_5v>;
+ status = "okay";
+};
+
+&u3phy {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&watchdog {
+ pinctrl-names = "default";
+ pinctrl-0 = <&watchdog_pins>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index a747b7bf132d..dcad0869b84c 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -51,7 +51,7 @@
};
memory {
- reg = <0 0x40000000 0 0x3F000000>;
+ reg = <0 0x40000000 0 0x20000000>;
};
reg_1p8v: regulator-1p8v {
@@ -81,6 +81,103 @@
};
};
+&bch {
+ status = "disabled";
+};
+
+&btif {
+ status = "okay";
+};
+
+&cir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&irrx_pins>;
+ status = "okay";
+};
+
+&eth {
+ pinctrl-names = "default";
+ pinctrl-0 = <&eth_pins>;
+ status = "okay";
+
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-handle = <&phy5>;
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "sgmii";
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&emmc_pins_default>;
+ pinctrl-1 = <&emmc_pins_uhs>;
+ status = "okay";
+ bus-width = <8>;
+ max-frequency = <50000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_1p8v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+ non-removable;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&sd0_pins_default>;
+ pinctrl-1 = <&sd0_pins_uhs>;
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ r_smpl = <1>;
+ cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_3p3v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+};
+
+&nandc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&parallel_nand_pins>;
+ status = "disabled";
+};
+
+&nor_flash {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_nor_pins>;
+ status = "disabled";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ };
+};
+
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pcie0_pins>;
@@ -344,103 +441,6 @@
};
};
-&bch {
- status = "disabled";
-};
-
-&btif {
- status = "okay";
-};
-
-&cir {
- pinctrl-names = "default";
- pinctrl-0 = <&irrx_pins>;
- status = "okay";
-};
-
-&eth {
- pinctrl-names = "default";
- pinctrl-0 = <&eth_pins>;
- status = "okay";
-
- gmac1: mac@1 {
- compatible = "mediatek,eth-mac";
- reg = <1>;
- phy-handle = <&phy5>;
- };
-
- mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "sgmii";
- };
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "okay";
-};
-
-&mmc0 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&emmc_pins_default>;
- pinctrl-1 = <&emmc_pins_uhs>;
- status = "okay";
- bus-width = <8>;
- max-frequency = <50000000>;
- cap-mmc-highspeed;
- mmc-hs200-1_8v;
- vmmc-supply = <&reg_3p3v>;
- vqmmc-supply = <&reg_1p8v>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
- non-removable;
-};
-
-&mmc1 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&sd0_pins_default>;
- pinctrl-1 = <&sd0_pins_uhs>;
- status = "okay";
- bus-width = <4>;
- max-frequency = <50000000>;
- cap-sd-highspeed;
- r_smpl = <1>;
- cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&reg_3p3v>;
- vqmmc-supply = <&reg_3p3v>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
-};
-
-&nandc {
- pinctrl-names = "default";
- pinctrl-0 = <&parallel_nand_pins>;
- status = "disabled";
-};
-
-&nor_flash {
- pinctrl-names = "default";
- pinctrl-0 = <&spi_nor_pins>;
- status = "disabled";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- };
-};
-
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm7_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index de2c47bdbe64..fe0c875f1d95 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -79,6 +79,7 @@
#cooling-cells = <2>;
enable-method = "psci";
clock-frequency = <1300000000>;
+ cci-control-port = <&cci_control2>;
};
cpu1: cpu@1 {
@@ -92,6 +93,7 @@
#cooling-cells = <2>;
enable-method = "psci";
clock-frequency = <1300000000>;
+ cci-control-port = <&cci_control2>;
};
};
@@ -113,6 +115,13 @@
method = "smc";
};
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -218,6 +227,16 @@
#reset-cells = <1>;
};
+ timer: timer@10004000 {
+ compatible = "mediatek,mt7622-timer",
+ "mediatek,mt6577-timer";
+ reg = <0 0x10004000 0 0x80>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_APXGPT_PD>,
+ <&topckgen CLK_TOP_RTC>;
+ clock-names = "system-clk", "rtc-clk";
+ };
+
scpsys: scpsys@10006000 {
compatible = "mediatek,mt7622-scpsys",
"syscon";
@@ -325,6 +344,42 @@
<0 0x10360000 0 0x2000>;
};
+ cci: cci@10390000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0x10390000 0 0x1000>;
+ ranges = <0 0 0x10390000 0x10000>;
+
+ cci_control0: slave-if@1000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace-lite";
+ reg = <0x1000 0x1000>;
+ };
+
+ cci_control1: slave-if@4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x4000 0x1000>;
+ };
+
+ cci_control2: slave-if@5000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x5000 0x1000>;
+ };
+
+ pmu@9000 {
+ compatible = "arm,cci-400-pmu,r1";
+ reg = <0x9000 0x5000>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
auxadc: adc@11001000 {
compatible = "mediatek,mt7622-auxadc";
reg = <0 0x11001000 0 0x1000>;
@@ -475,6 +530,13 @@
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
+
+ bluetooth {
+ compatible = "mediatek,mt7622-bluetooth";
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
+ clocks = <&clk25m>;
+ clock-names = "ref";
+ };
};
nandc: nfi@1100d000 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index b762227f6aa1..2f3c8e29520d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/tegra186-hsp.h>
#include <dt-bindings/memory/tegra186-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
#include <dt-bindings/power/tegra186-powergate.h>
#include <dt-bindings/reset/tegra186-reset.h>
#include <dt-bindings/thermal/tegra186-bpmp-thermal.h>
@@ -236,6 +237,20 @@
clock-names = "sdhci";
resets = <&bpmp TEGRA186_RESET_SDMMC1>;
reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc1_3v3>;
+ pinctrl-1 = <&sdmmc1_1v8>;
+ nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
+ nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+ nvidia,pad-autocal-pull-up-offset-sdr104 = <0x03>;
+ nvidia,pad-autocal-pull-down-offset-sdr104 = <0x05>;
+ nvidia,default-tap = <0x5>;
+ nvidia,default-trim = <0xb>;
+ assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
+ <&bpmp TEGRA186_CLK_PLLP_OUT0>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>;
status = "disabled";
};
@@ -247,6 +262,15 @@
clock-names = "sdhci";
resets = <&bpmp TEGRA186_RESET_SDMMC2>;
reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc2_3v3>;
+ pinctrl-1 = <&sdmmc2_1v8>;
+ nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
+ nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+ nvidia,default-tap = <0x5>;
+ nvidia,default-trim = <0xb>;
status = "disabled";
};
@@ -258,6 +282,17 @@
clock-names = "sdhci";
resets = <&bpmp TEGRA186_RESET_SDMMC3>;
reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc3_3v3>;
+ pinctrl-1 = <&sdmmc3_1v8>;
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
+ nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
+ nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+ nvidia,default-tap = <0x5>;
+ nvidia,default-trim = <0xb>;
status = "disabled";
};
@@ -267,8 +302,19 @@
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA186_CLK_SDMMC4>;
clock-names = "sdhci";
+ assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
+ <&bpmp TEGRA186_CLK_PLLC4_VCO>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>;
resets = <&bpmp TEGRA186_RESET_SDMMC4>;
reset-names = "sdhci";
+ nvidia,pad-autocal-pull-up-offset-hs400 = <0x05>;
+ nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>;
+ nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
+ nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>;
+ nvidia,default-tap = <0x5>;
+ nvidia,default-trim = <0x9>;
+ nvidia,dqs-trim = <63>;
+ mmc-hs400-1_8v;
status = "disabled";
};
@@ -368,6 +414,36 @@
<0 0x0c380000 0 0x10000>,
<0 0x0c390000 0 0x10000>;
reg-names = "pmc", "wake", "aotag", "scratch";
+
+ sdmmc1_3v3: sdmmc1-3v3 {
+ pins = "sdmmc1-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc1_1v8: sdmmc1-1v8 {
+ pins = "sdmmc1-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
+
+ sdmmc2_3v3: sdmmc2-3v3 {
+ pins = "sdmmc2-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc2_1v8: sdmmc2-1v8 {
+ pins = "sdmmc2-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
+
+ sdmmc3_3v3: sdmmc3-3v3 {
+ pins = "sdmmc3-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc3_1v8: sdmmc3-1v8 {
+ pins = "sdmmc3-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
};
ccplex@e000000 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index a4dfcd19b9e8..9fc14bb9a0af 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -118,7 +118,7 @@
};
gen1_i2c: i2c@3160000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x03160000 0x10000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -143,7 +143,7 @@
};
cam_i2c: i2c@3180000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x03180000 0x10000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -157,7 +157,7 @@
/* shares pads with dpaux1 */
dp_aux_ch1_i2c: i2c@3190000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x03190000 0x10000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -171,7 +171,7 @@
/* shares pads with dpaux0 */
dp_aux_ch0_i2c: i2c@31b0000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x031b0000 0x10000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -184,7 +184,7 @@
};
gen7_i2c: i2c@31c0000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x031c0000 0x10000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -197,7 +197,7 @@
};
gen9_i2c: i2c@31e0000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x031e0000 0x10000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -264,7 +264,7 @@
};
gen2_i2c: i2c@c240000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x0c240000 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -277,7 +277,7 @@
};
gen8_i2c: i2c@c250000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x0c250000 0x10000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index 212e6634c9ba..053458a5db55 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -178,16 +178,7 @@
vddio_sdmmc: ldo2 {
regulator-name = "VDDIO_SDMMC";
- /*
- * Technically this supply should have
- * a supported range from 1.8 - 3.3 V.
- * However, that would cause the SDHCI
- * driver to request 2.7 V upon access
- * and that in turn will cause traffic
- * to be broken. Leave it at 3.3 V for
- * now.
- */
- regulator-min-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
@@ -282,6 +273,7 @@
status = "okay";
bus-width = <8>;
non-removable;
+ vqmmc-supply = <&vdd_1v8>;
};
clocks {
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index 9d5a0e6b2ca4..365726ddd418 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1452,7 +1452,6 @@
sdhci@700b0000 {
status = "okay";
bus-width = <4>;
- no-1-8-v;
cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 3be920efee82..8fe47d6445a5 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/gpio/tegra-gpio.h>
#include <dt-bindings/memory/tegra210-mc.h>
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/tegra124-soctherm.h>
@@ -776,6 +777,26 @@
#power-domain-cells = <0>;
};
};
+
+ sdmmc1_3v3: sdmmc1-3v3 {
+ pins = "sdmmc1";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc1_1v8: sdmmc1-1v8 {
+ pins = "sdmmc1";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
+
+ sdmmc3_3v3: sdmmc3-3v3 {
+ pins = "sdmmc3";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc3_1v8: sdmmc3-1v8 {
+ pins = "sdmmc3";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
};
fuse@7000f800 {
@@ -1027,6 +1048,20 @@
clock-names = "sdhci";
resets = <&tegra_car 14>;
reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc1_3v3>;
+ pinctrl-1 = <&sdmmc1_1v8>;
+ nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+ nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+ nvidia,default-tap = <0x2>;
+ nvidia,default-trim = <0x4>;
+ assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+ <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>,
+ <&tegra_car TEGRA210_CLK_PLL_C4>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+ assigned-clock-rates = <200000000>, <1000000000>, <1000000000>;
status = "disabled";
};
@@ -1038,6 +1073,10 @@
clock-names = "sdhci";
resets = <&tegra_car 9>;
reset-names = "sdhci";
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>;
+ nvidia,default-tap = <0x8>;
+ nvidia,default-trim = <0x0>;
status = "disabled";
};
@@ -1049,6 +1088,15 @@
clock-names = "sdhci";
resets = <&tegra_car 69>;
reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc3_3v3>;
+ pinctrl-1 = <&sdmmc3_1v8>;
+ nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+ nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+ nvidia,default-tap = <0x3>;
+ nvidia,default-trim = <0x3>;
status = "disabled";
};
@@ -1060,6 +1108,15 @@
clock-names = "sdhci";
resets = <&tegra_car 15>;
reset-names = "sdhci";
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>;
+ nvidia,default-tap = <0x8>;
+ nvidia,default-trim = <0x0>;
+ assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+ <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+ nvidia,dqs-trim = <40>;
+ mmc-hs400-1_8v;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 9319e74b8906..a658c07652a7 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -6,4 +6,5 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 78ce3979ef09..46feedf7c989 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -545,6 +545,20 @@
};
};
+&spmi_bus {
+ pm8916_0: pm8916@0 {
+ pon@800 {
+ resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+ };
+};
+
&wcd_codec {
status = "okay";
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index 230e9c8484ac..da23bdafbd33 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -17,5 +17,5 @@
/ {
model = "Qualcomm Technologies, Inc. DB820c";
- compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc";
+ compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 0ef90c6554a9..bf20c55a6bc4 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -623,3 +623,17 @@
};
};
};
+
+&spmi_bus {
+ pmic@0 {
+ pon@800 {
+ resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 7b32b8990d62..d302d8d639a1 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -18,9 +18,6 @@
#include <dt-bindings/thermal/thermal.h>
/ {
- model = "Qualcomm Technologies, Inc. MSM8916";
- compatible = "qcom,msm8916";
-
interrupt-parent = <&intc>;
#address-cells = <2>;
@@ -1099,10 +1096,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
@@ -1114,7 +1112,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1132,12 +1130,13 @@
port@4 {
reg = <4>;
funnel0_in4: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
funnel0_out: endpoint {
remote-endpoint = <&etf_in>;
};
@@ -1152,7 +1151,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1168,10 +1167,11 @@
remote-endpoint = <&tpiu_in>;
};
};
- port@2 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&etf_out>;
};
};
@@ -1185,19 +1185,16 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf_in: endpoint {
- slave-mode;
remote-endpoint = <&funnel0_out>;
};
};
- port@1 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
etf_out: endpoint {
remote-endpoint = <&replicator_in>;
};
@@ -1212,10 +1209,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etr_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
@@ -1227,40 +1225,38 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
funnel1_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
funnel1_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
funnel1_in2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
funnel1_in3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@4 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
funnel1_out: endpoint {
remote-endpoint = <&funnel0_in4>;
};
@@ -1309,9 +1305,11 @@
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel1_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel1_in0>;
+ };
};
};
};
@@ -1325,9 +1323,11 @@
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel1_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel1_in1>;
+ };
};
};
};
@@ -1341,9 +1341,11 @@
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel1_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel1_in2>;
+ };
};
};
};
@@ -1357,9 +1359,11 @@
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel1_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel1_in3>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index cd3865e7a270..b29fe80d7288 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -16,8 +16,6 @@
#include <dt-bindings/clock/qcom,rpmcc.h>
/ {
- model = "Qualcomm Technologies, Inc. MSM8996";
-
interrupt-parent = <&intc>;
#address-cells = <2>;
@@ -409,11 +407,6 @@
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
- apcs: syscon@9820000 {
- compatible = "syscon";
- reg = <0x9820000 0x1000>;
- };
-
apcs_glb: mailbox@9820000 {
compatible = "qcom,msm8996-apcs-hmss-global";
reg = <0x9820000 0x1000>;
@@ -1140,7 +1133,7 @@
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
label = "lpass";
- qcom,ipc = <&apcs 16 8>;
+ mboxes = <&apcs_glb 8>;
qcom,smd-edge = <1>;
qcom,remote-pid = <2>;
};
@@ -1152,7 +1145,7 @@
interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 16 10>;
+ mboxes = <&apcs_glb 10>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
@@ -1176,7 +1169,7 @@
interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 16 14>;
+ mboxes = <&apcs_glb 14>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
@@ -1200,7 +1193,7 @@
interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 16 26>;
+ mboxes = <&apcs_glb 26>;
qcom,local-pid = <0>;
qcom,remote-pid = <3>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
new file mode 100644
index 000000000000..66540d2ca13b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998-mtp.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP";
+ compatible = "qcom,msm8998-mtp";
+
+ qcom,board-id = <8 0>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
new file mode 100644
index 000000000000..b4276da1fb0d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
+
+#include "msm8998.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+#include "pm8005.dtsi"
+
+/ {
+ aliases {
+ serial0 = &blsp2_uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ thermal-zones {
+ battery-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ battery_crit: trip0 {
+ temperature = <60000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ skin-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ skin_alert: trip0 {
+ temperature = <44000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ skip_crit: trip1 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&blsp2_uart1 {
+ status = "okay";
+};
+
+&rpm_requests {
+ pm8998-regulators {
+ compatible = "qcom,rpm-pm8998-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_s8-supply = <&vph_pwr>;
+ vdd_s9-supply = <&vph_pwr>;
+ vdd_s10-supply = <&vph_pwr>;
+ vdd_s11-supply = <&vph_pwr>;
+ vdd_s12-supply = <&vph_pwr>;
+ vdd_s13-supply = <&vph_pwr>;
+ vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+ vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+ vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+ vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+ vdd_l6-supply = <&vreg_s5a_2p04>;
+ vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+ vdd_l9-supply = <&vreg_bob>;
+ vdd_l10_l23_l25-supply = <&vreg_bob>;
+ vdd_l13_l19_l21-supply = <&vreg_bob>;
+ vdd_l16_l28-supply = <&vreg_bob>;
+ vdd_l18_l22-supply = <&vreg_bob>;
+ vdd_l20_l24-supply = <&vreg_bob>;
+ vdd_l26-supply = <&vreg_s3a_1p35>;
+ vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+ vreg_s3a_1p35: s3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+ vreg_s4a_1p8: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_s5a_2p04: s5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ };
+ vreg_s7a_1p025: s7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1028000>;
+ };
+ vreg_l1a_0p875: l1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ };
+ vreg_l2a_1p2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vreg_l3a_1p0: l3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+ vreg_l5a_0p8: l5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+ vreg_l6a_1p8: l6 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <1808000>;
+ };
+ vreg_l7a_1p8: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l8a_1p2: l8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vreg_l9a_1p8: l9 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l10a_1p8: l10 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l11a_1p0: l11 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+ vreg_l12a_1p8: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l13a_2p95: l13 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l14a_1p88: l14 {
+ regulator-min-microvolt = <1880000>;
+ regulator-max-microvolt = <1880000>;
+ };
+ vreg_15a_1p8: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l16a_2p7: l16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ };
+ vreg_l17a_1p3: l17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ };
+ vreg_l18a_2p7: l18 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ };
+ vreg_l19a_3p0: l19 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ };
+ vreg_l20a_2p95: l20 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l21a_2p95: l21 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l22a_2p85: l22 {
+ regulator-min-microvolt = <2864000>;
+ regulator-max-microvolt = <2864000>;
+ };
+ vreg_l23a_3p3: l23 {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3312000>;
+ };
+ vreg_l24a_3p075: l24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ };
+ vreg_l25a_3p3: l25 {
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3312000>;
+ };
+ vreg_l26a_1p2: l26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vreg_l28_3p0: l28 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ };
+
+ vreg_lvs1a_1p8: lvs1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_lvs2a_1p8: lvs2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ };
+
+ pmi8998-regulators {
+ compatible = "qcom,rpm-pmi8998-regulators";
+
+ vdd_bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3600000>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
new file mode 100644
index 000000000000..78227cce16db
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -0,0 +1,690 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8998.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ qcom,msm-id = <292 0x0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ memory {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0 0 0>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ memory@85800000 {
+ reg = <0x0 0x85800000 0x0 0x800000>;
+ no-map;
+ };
+
+ smem_mem: smem-mem@86000000 {
+ reg = <0x0 0x86000000 0x0 0x200000>;
+ no-map;
+ };
+
+ memory@86200000 {
+ reg = <0x0 0x86200000 0x0 0x2600000>;
+ no-map;
+ };
+
+ rmtfs {
+ compatible = "qcom,rmtfs-mem";
+
+ size = <0x0 0x200000>;
+ alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
+ };
+ };
+
+ clocks {
+ xo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+
+ sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32764>;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ efficiency = <1024>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ compatible = "arm,arch-cache";
+ cache-level = <2>;
+ };
+ L1_I_0: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_0: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ efficiency = <1024>;
+ next-level-cache = <&L2_0>;
+ L1_I_1: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_1: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ efficiency = <1024>;
+ next-level-cache = <&L2_0>;
+ L1_I_2: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_2: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ efficiency = <1024>;
+ next-level-cache = <&L2_0>;
+ L1_I_3: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_3: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ efficiency = <1536>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ compatible = "arm,arch-cache";
+ cache-level = <2>;
+ };
+ L1_I_100: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_100: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ efficiency = <1536>;
+ next-level-cache = <&L2_1>;
+ L1_I_101: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_101: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ efficiency = <1536>;
+ next-level-cache = <&L2_1>;
+ L1_I_102: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_102: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ efficiency = <1536>;
+ next-level-cache = <&L2_1>;
+ L1_I_103: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_103: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+
+ core1 {
+ cpu = <&CPU5>;
+ };
+
+ core2 {
+ cpu = <&CPU6>;
+ };
+
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+ };
+
+ firmware {
+ scm {
+ compatible = "qcom,scm-msm8998";
+ };
+ };
+
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_regs 0 0x1000>;
+ #hwlock-cells = <1>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ rpm-glink {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8998";
+ qcom,glink-channels = "rpm_requests";
+ };
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ smp2p-lpass {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-mpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+ interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 14>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-slpi {
+ compatible = "qcom,smp2p";
+ qcom,smem = <481>, <430>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 26>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <3>;
+
+ slpi_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ slpi_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ thermal-zones {
+ cpu-thermal0 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit0: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu_alert1: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit1: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu_alert2: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit2: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu_alert3: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit3: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal4 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ cpu_alert4: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit4: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal5 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cpu_alert5: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit5: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal6 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ cpu_alert6: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit6: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal7 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ cpu_alert7: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit7: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 3>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ rpm_msg_ram: memory@68000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x778000 0x7000>;
+ };
+
+ qfprom: qfprom@780000 {
+ compatible = "qcom,qfprom";
+ reg = <0x780000 0x621c>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-msm8998";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x100000 0xb0000>;
+ };
+
+ tlmm: pinctrl@3400000 {
+ compatible = "qcom,msm8998-pinctrl";
+ reg = <0x3400000 0xc00000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ spmi_bus: spmi@800f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x800f000 0x1000>,
+ <0x8400000 0x1000000>,
+ <0x9400000 0x1000000>,
+ <0xa400000 0x220000>,
+ <0x800a000 0x3000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ cell-index = <0>;
+ };
+
+ tsens0: thermal@10aa000 {
+ compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
+ reg = <0x10aa000 0x2000>;
+
+ #qcom,sensors = <12>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal@10ad000 {
+ compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
+ reg = <0x10ad000 0x2000>;
+
+ #qcom,sensors = <8>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tcsr_mutex_regs: syscon@1f40000 {
+ compatible = "syscon";
+ reg = <0x1f40000 0x20000>;
+ };
+
+ apcs_glb: mailbox@9820000 {
+ compatible = "qcom,msm8998-apcs-hmss-global";
+ reg = <0x17911000 0x1000>;
+
+ #mbox-cells = <1>;
+ };
+
+ blsp2_uart1: serial@c1b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xc1b0000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ timer@17920000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x17920000 0x1000>;
+
+ frame@17921000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17921000 0x1000>,
+ <0x17922000 0x1000>;
+ };
+
+ frame@17923000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17923000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17924000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17924000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17925000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17925000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17926000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17926000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17927000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17927000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17928000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17928000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ intc: interrupt-controller@17a00000 {
+ compatible = "arm,gic-v3";
+ reg = <0x17a00000 0x10000>, /* GICD */
+ <0x17b00000 0x100000>; /* GICR * 8 */
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x20000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index 196b1c0ceb9b..15a37cbcd216 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
@@ -18,12 +19,19 @@
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
- pwrkey@800 {
- compatible = "qcom,pm8941-pwrkey";
+ pon@800 {
+ compatible = "qcom,pm8916-pon";
reg = <0x800>;
- interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
};
pm8916_gpios: gpios@c000 {
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index 80024c0b1c7c..76b5a3e6a2b5 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/input/linux-event-codes.h>
&spmi_bus {
@@ -17,6 +18,23 @@
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
+ pon@800 {
+ compatible = "qcom,pm8916-pon";
+
+ reg = <0x800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+
+ };
+
pm8994_gpios: gpios@c000 {
compatible = "qcom,pm8994-gpio";
reg = <0xc000>;
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index 92bed1e7d4bb..048f19fa0150 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -1,8 +1,35 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/* Copyright 2018 Google LLC. */
-#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ thermal-zones {
+ pm8998 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&pm8998_temp>;
+
+ trips {
+ pm8998_alert0: pm8998-alert0 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ pm8998_crit: pm8998-crit {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
&spmi_bus {
pm8998_lsid0: pmic@0 {
@@ -11,6 +38,52 @@
#address-cells = <1>;
#size-cells = <0>;
+ pm8998_pon: pon@800 {
+ compatible = "qcom,pm8916-pon";
+
+ reg = <0x800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ pm8998_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400>;
+ interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm8998_coincell: coincell@2800 {
+ compatible = "qcom,pm8941-coincell";
+ reg = <0x2800>;
+
+ status = "disabled";
+ };
+
+ pm8998_adc: adc@3100 {
+ compatible = "qcom,spmi-adc-rev2";
+ reg = <0x3100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+ };
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000>, <0x6100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
pm8998_gpio: gpios@c000 {
compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
new file mode 100644
index 000000000000..da3285e216e2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+ pmi8998_lsid0: pmic@2 {
+ compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+ reg = <0x2 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmi8998_gpio: gpios@c000 {
+ compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xc8 0 IRQ_TYPE_NONE>,
+ <0 0xc9 0 IRQ_TYPE_NONE>,
+ <0 0xca 0 IRQ_TYPE_NONE>,
+ <0 0xcb 0 IRQ_TYPE_NONE>,
+ <0 0xcc 0 IRQ_TYPE_NONE>,
+ <0 0xcd 0 IRQ_TYPE_NONE>;
+ };
+ };
+
+ pmi8998_lsid1: pmic@3 {
+ compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+ reg = <0x3 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 6d651f314193..eedfaf8922e2 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -7,6 +7,7 @@
/dts-v1/;
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sdm845.dtsi"
/ {
@@ -20,6 +21,326 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ /*
+ * Apparently RPMh does not provide support for PM8998 S4 because it
+ * is always-on; model it as a fixed regulator.
+ */
+ vreg_s4a_1p8: pm8998-smps4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&vph_pwr>;
+ };
+};
+
+&apps_rsc {
+ pm8998-rpmh-regulators {
+ compatible = "qcom,pm8998-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-s11-supply = <&vph_pwr>;
+ vdd-s12-supply = <&vph_pwr>;
+ vdd-s13-supply = <&vph_pwr>;
+ vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+ vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+ vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+ vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+ vdd-l6-supply = <&vph_pwr>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+ vdd-l9-supply = <&vreg_bob>;
+ vdd-l10-l23-l25-supply = <&vreg_bob>;
+ vdd-l13-l19-l21-supply = <&vreg_bob>;
+ vdd-l16-l28-supply = <&vreg_bob>;
+ vdd-l18-l22-supply = <&vreg_bob>;
+ vdd-l20-l24-supply = <&vreg_bob>;
+ vdd-l26-supply = <&vreg_s3a_1p35>;
+ vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+ vreg_s2a_1p125: smps2 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ vreg_s3a_1p35: smps3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_s5a_2p04: smps5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s7a_1p025: smps7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1028000>;
+ };
+
+ vdd_qusb_hs0:
+ vdda_hp_pcie_core:
+ vdda_mipi_csi0_0p9:
+ vdda_mipi_csi1_0p9:
+ vdda_mipi_csi2_0p9:
+ vdda_mipi_dsi0_pll:
+ vdda_mipi_dsi1_pll:
+ vdda_qlink_lv:
+ vdda_qlink_lv_ck:
+ vdda_qrefs_0p875:
+ vdda_pcie_core:
+ vdda_pll_cc_ebi01:
+ vdda_pll_cc_ebi23:
+ vdda_sp_sensor:
+ vdda_ufs1_core:
+ vdda_ufs2_core:
+ vdda_usb1_ss_core:
+ vdda_usb2_ss_core:
+ vreg_l1a_0p875: ldo1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_10:
+ vreg_l2a_1p2: ldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l3a_1p0: ldo3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_wcss_cx:
+ vdd_wcss_mx:
+ vdda_wcss_pll:
+ vreg_l5a_0p8: ldo5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_13:
+ vreg_l6a_1p8: ldo6 {
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <1856000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8a_1p2: ldo8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1248000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a_1p8: ldo9 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_1p8: ldo10 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11a_1p0: ldo11 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1048000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_qfprom:
+ vdd_qfprom_sp:
+ vdda_apc1_cs_1p8:
+ vdda_gfx_cs_1p8:
+ vdda_qrefs_1p8:
+ vdda_qusb_hs0_1p8:
+ vddpx_11:
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_2:
+ vreg_l13a_2p95: ldo13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14a_1p88: ldo14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a_1p8: ldo15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_1p3: ldo17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18a_2p7: ldo18 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l19a_3p0: ldo19 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l20a_2p95: ldo20 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l21a_2p95: ldo21 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l22a_2p85: ldo22 {
+ regulator-min-microvolt = <2864000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l23a_3p3: ldo23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_qusb_hs0_3p1:
+ vreg_l24a_3p075: ldo24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l25a_3p3: ldo25 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_hp_pcie_1p2:
+ vdda_hv_ebi0:
+ vdda_hv_ebi1:
+ vdda_hv_ebi2:
+ vdda_hv_ebi3:
+ vdda_mipi_csi_1p25:
+ vdda_mipi_dsi0_1p2:
+ vdda_mipi_dsi1_1p2:
+ vdda_pcie_1p2:
+ vdda_ufs1_1p2:
+ vdda_ufs2_1p2:
+ vdda_usb1_ss_1p2:
+ vdda_usb2_ss_1p2:
+ vreg_l26a_1p2: ldo26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l28a_3p0: ldo28 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_lvs1a_1p8: lvs1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_lvs2a_1p8: lvs2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+
+ pmi8998-rpmh-regulators {
+ compatible = "qcom,pmi8998-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-allow-bypass;
+ };
+ };
+
+ pm8005-rpmh-regulators {
+ compatible = "qcom,pm8005-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s3c_0p6: smps3 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ };
+ };
};
&i2c10 {
@@ -35,6 +356,67 @@
status = "okay";
};
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ /* Until we have Type C hooked up we'll force this as host. */
+ dr_mode = "host";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vdda_usb1_ss_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+ qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+ qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+ vdda-pll-supply = <&vdda_usb1_ss_core>;
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ /*
+ * Though the USB block on SDM845 can support host, there's no vbus
+ * signal for this port on MTP. Thus (unless you have a non-compliant
+ * hub that works without vbus) the only sensible thing is to force
+ * peripheral mode.
+ */
+ dr_mode = "peripheral";
+};
+
+&usb_2_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vdda_usb2_ss_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+ vdda-pll-supply = <&vdda_usb2_ss_core>;
+};
+
/* PINCTRL - additions to nodes defined in sdm845.dtsi */
&qup_i2c10_default {
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 0c9a2aa6a1b5..b72bdb0a31a5 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -5,9 +5,12 @@
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
*/
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
/ {
@@ -230,6 +233,94 @@
hwlocks = <&tcsr_mutex 3>;
};
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+
+ interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apss_shared 6>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ cdsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ cdsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-lpass {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apss_shared 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-mpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+ interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apss_shared 14>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-slpi {
+ compatible = "qcom,smp2p";
+ qcom,smem = <481>, <430>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apss_shared 26>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <3>;
+
+ slpi_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ slpi_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -249,6 +340,23 @@
#power-domain-cells = <1>;
};
+ qfprom@784000 {
+ compatible = "qcom,qfprom";
+ reg = <0x784000 0x8ff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qusb2p_hstx_trim: hstx-trim-primary@1eb {
+ reg = <0x1eb 0x1>;
+ bits = <1 4>;
+ };
+
+ qusb2s_hstx_trim: hstx-trim-secondary@1eb {
+ reg = <0x1eb 0x2>;
+ bits = <6 4>;
+ };
+ };
+
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x8c0000 0x6000>;
@@ -962,6 +1070,192 @@
};
};
+ usb_1_hsphy: phy@88e2000 {
+ compatible = "qcom,sdm845-qusb2-phy";
+ reg = <0x88e2000 0x400>;
+ status = "disabled";
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ nvmem-cells = <&qusb2p_hstx_trim>;
+ };
+
+ usb_2_hsphy: phy@88e3000 {
+ compatible = "qcom,sdm845-qusb2-phy";
+ reg = <0x88e3000 0x400>;
+ status = "disabled";
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+ nvmem-cells = <&qusb2s_hstx_trim>;
+ };
+
+ usb_1_qmpphy: phy@88e9000 {
+ compatible = "qcom,sdm845-qmp-usb3-phy";
+ reg = <0x88e9000 0x18c>,
+ <0x88e8000 0x10>;
+ reg-names = "reg-base", "dp_com";
+ status = "disabled";
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+ resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3_PHY_PRIM_BCR>;
+ reset-names = "phy", "common";
+
+ usb_1_ssphy: lane@88e9200 {
+ reg = <0x88e9200 0x128>,
+ <0x88e9400 0x200>,
+ <0x88e9c00 0x218>,
+ <0x88e9a00 0x100>;
+ #phy-cells = <0>;
+ clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ };
+ };
+
+ usb_2_qmpphy: phy@88eb000 {
+ compatible = "qcom,sdm845-qmp-usb3-uni-phy";
+ reg = <0x88eb000 0x18c>;
+ status = "disabled";
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+ resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+ <&gcc GCC_USB3_PHY_SEC_BCR>;
+ reset-names = "phy", "common";
+
+ usb_2_ssphy: lane@88eb200 {
+ reg = <0x88eb200 0x128>,
+ <0x88eb400 0x1fc>,
+ <0x88eb800 0x218>,
+ <0x88e9600 0x70>;
+ #phy-cells = <0>;
+ clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ };
+ };
+
+ usb_1: usb@a6f8800 {
+ compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
+ reg = <0xa6f8800 0x400>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+ "sleep";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <150000000>;
+
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "ss_phy_irq",
+ "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ usb_1_dwc3: dwc3@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0xa600000 0xcd00>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ usb_2: usb@a8f8800 {
+ compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
+ reg = <0xa8f8800 0x400>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SEC_SLEEP_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+ "sleep";
+
+ assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <150000000>;
+
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "ss_phy_irq",
+ "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+ power-domains = <&gcc USB30_SEC_GDSC>;
+
+ resets = <&gcc GCC_USB30_SEC_BCR>;
+
+ usb_2_dwc3: dwc3@a800000 {
+ compatible = "snps,dwc3";
+ reg = <0xa800000 0xcd00>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sdm845-dispcc";
+ reg = <0xaf00000 0x10000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
tsens0: thermal-sensor@c263000 {
compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
reg = <0xc263000 0x1ff>, /* TM */
@@ -978,6 +1272,12 @@
#thermal-sensor-cells = <1>;
};
+ aoss_reset: reset-controller@c2a0000 {
+ compatible = "qcom,sdm845-aoss-cc";
+ reg = <0xc2a0000 0x31000>;
+ #reset-cells = <1>;
+ };
+
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xc440000 0x1100>,
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 9e2394bc3c62..a8ce6594342d 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -8,6 +8,8 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb
dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb
dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb r8a77980-v3hsk.dtb
dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
new file mode 100644
index 000000000000..012cbb64246e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -0,0 +1,1663 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a774a1 SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/ {
+ compatible = "renesas,r8a774a1";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c_dvfs;
+ };
+
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ a57_0: cpu@0 {
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x0>;
+ device_type = "cpu";
+ power-domains = <&sysc 0>;
+ next-level-cache = <&L2_CA57>;
+ enable-method = "psci";
+ clocks = <&cpg CPG_CORE 0>;
+ };
+
+ a57_1: cpu@1 {
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x1>;
+ device_type = "cpu";
+ power-domains = <&sysc 1>;
+ next-level-cache = <&L2_CA57>;
+ enable-method = "psci";
+ clocks = <&cpg CPG_CORE 0>;
+ };
+
+ a53_0: cpu@100 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x100>;
+ device_type = "cpu";
+ power-domains = <&sysc 5>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ clocks =<&cpg CPG_CORE 1>;
+ };
+
+ a53_1: cpu@101 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x101>;
+ device_type = "cpu";
+ power-domains = <&sysc 6>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ clocks =<&cpg CPG_CORE 1>;
+ };
+
+ a53_2: cpu@102 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x102>;
+ device_type = "cpu";
+ power-domains = <&sysc 7>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ clocks =<&cpg CPG_CORE 1>;
+ };
+
+ a53_3: cpu@103 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x103>;
+ device_type = "cpu";
+ power-domains = <&sysc 8>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ clocks =<&cpg CPG_CORE 1>;
+ };
+
+ L2_CA57: cache-controller-0 {
+ compatible = "cache";
+ power-domains = <&sysc 12>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ L2_CA53: cache-controller-1 {
+ compatible = "cache";
+ power-domains = <&sysc 21>;
+ cache-unified;
+ cache-level = <2>;
+ };
+ };
+
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ extalr_clk: extalr {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+ };
+
+ pmu_a57 {
+ compatible = "arm,cortex-a57-pmu";
+ interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a57_0>, <&a57_1>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ /* External SCIF clock - to be overridden by boards that provide it */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ rwdt: watchdog@e6020000 {
+ compatible = "renesas,r8a774a1-wdt",
+ "renesas,rcar-gen3-wdt";
+ reg = <0 0xe6020000 0 0x0c>;
+ clocks = <&cpg CPG_MOD 402>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 402>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 16>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 912>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 912>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 29>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 911>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 911>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 15>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 910>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 910>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 16>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 909>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 909>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 18>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 908>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 908>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 907>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 907>;
+ };
+
+ gpio6: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6055400 0 0x50>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 906>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 906>;
+ };
+
+ gpio7: gpio@e6055800 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6055800 0 0x50>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 224 4>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 905>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 905>;
+ };
+
+ pfc: pin-controller@e6060000 {
+ compatible = "renesas,pfc-r8a774a1";
+ reg = <0 0xe6060000 0 0x50c>;
+ };
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a774a1-cpg-mssr";
+ reg = <0 0xe6150000 0 0x0bb0>;
+ clocks = <&extal_clk>, <&extalr_clk>;
+ clock-names = "extal", "extalr";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };
+
+ rst: reset-controller@e6160000 {
+ compatible = "renesas,r8a774a1-rst";
+ reg = <0 0xe6160000 0 0x018c>;
+ };
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a774a1-sysc";
+ reg = <0 0xe6180000 0 0x0400>;
+ #power-domain-cells = <1>;
+ };
+
+ tsc: thermal@e6198000 {
+ compatible = "renesas,r8a774a1-thermal";
+ reg = <0 0xe6198000 0 0x100>,
+ <0 0xe61a0000 0 0x100>,
+ <0 0xe61a8000 0 0x100>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ intc_ex: interrupt-controller@e61c0000 {
+ compatible = "renesas,intc-ex-r8a774a1", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 407>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 407>;
+ };
+
+ i2c0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 931>;
+ dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+ <&dmac2 0x91>, <&dmac2 0x90>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 930>;
+ dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+ <&dmac2 0x93>, <&dmac2 0x92>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6510000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 929>;
+ dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+ <&dmac2 0x95>, <&dmac2 0x94>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e66d0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 928>;
+ dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e66d8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d8000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 927>;
+ dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e66e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e0000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 919>;
+ dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@e66e8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e8000 0 0x40>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 918>;
+ dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c_dvfs: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a774a1",
+ "renesas,rcar-gen3-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 926>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 926>;
+ dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ hscif0: serial@e6540000 {
+ compatible = "renesas,hscif-r8a774a1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6540000 0 0x60>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 520>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+ <&dmac2 0x31>, <&dmac2 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 520>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e6550000 {
+ compatible = "renesas,hscif-r8a774a1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6550000 0 0x60>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 519>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+ <&dmac2 0x33>, <&dmac2 0x32>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 519>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e6560000 {
+ compatible = "renesas,hscif-r8a774a1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6560000 0 0x60>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 518>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+ <&dmac2 0x35>, <&dmac2 0x34>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 518>;
+ status = "disabled";
+ };
+
+ hscif3: serial@e66a0000 {
+ compatible = "renesas,hscif-r8a774a1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66a0000 0 0x60>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 517>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 517>;
+ status = "disabled";
+ };
+
+ hscif4: serial@e66b0000 {
+ compatible = "renesas,hscif-r8a774a1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66b0000 0 0x60>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 516>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 516>;
+ status = "disabled";
+ };
+
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a774a1",
+ "renesas,rcar-gen3-usbhs";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>;
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <11>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 704>;
+ status = "disabled";
+ };
+
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,r8a774a1-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 330>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 330>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,r8a774a1-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 331>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 331>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb3_phy0: usb-phy@e65ee000 {
+ compatible = "renesas,r8a774a1-usb3-phy",
+ "renesas,rcar-gen3-usb3-phy";
+ reg = <0 0xe65ee000 0 0x90>;
+ clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+ <&usb_extal_clk>;
+ clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 328>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a774a1",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x10000>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 219>;
+ clock-names = "fck";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 219>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ dmac1: dma-controller@e7300000 {
+ compatible = "renesas,dmac-r8a774a1",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7300000 0 0x10000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 218>;
+ clock-names = "fck";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 218>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ dmac2: dma-controller@e7310000 {
+ compatible = "renesas,dmac-r8a774a1",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7310000 0 0x10000>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 217>;
+ clock-names = "fck";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 217>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ ipmmu_ds0: mmu@e6740000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xe6740000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 0>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_ds1: mmu@e7740000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xe7740000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 1>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_hc: mmu@e6570000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xe6570000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 2>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_mm: mmu@e67b0000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xe67b0000 0 0x1000>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_mp: mmu@ec670000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xec670000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 4>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_pv0: mmu@fd800000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xfd800000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 5>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_pv1: mmu@fd950000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xfd950000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 6>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vc0: mmu@fe6b0000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xfe6b0000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 8>;
+ power-domains = <&sysc 14>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vi0: mmu@febd0000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xfebd0000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 9>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ avb: ethernet@e6800000 {
+ compatible = "renesas,etheravb-r8a774a1",
+ "renesas,etheravb-rcar-gen3";
+ reg = <0 0xe6800000 0 0x800>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19",
+ "ch20", "ch21", "ch22", "ch23",
+ "ch24";
+ clocks = <&cpg CPG_MOD 812>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 812>;
+ phy-mode = "rgmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 0x40>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 207>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+ <&dmac2 0x51>, <&dmac2 0x50>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 207>;
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 0x40>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 206>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+ <&dmac2 0x53>, <&dmac2 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 206>;
+ status = "disabled";
+ };
+
+ scif2: serial@e6e88000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e88000 0 0x40>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 310>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 310>;
+ status = "disabled";
+ };
+
+ scif3: serial@e6c50000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c50000 0 0x40>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 204>;
+ status = "disabled";
+ };
+
+ scif4: serial@e6c40000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c40000 0 0x40>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 203>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 203>;
+ status = "disabled";
+ };
+
+ scif5: serial@e6f30000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6f30000 0 0x40>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 202>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+ <&dmac2 0x5b>, <&dmac2 0x5a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 202>;
+ status = "disabled";
+ };
+
+ msiof0: spi@e6e90000 {
+ compatible = "renesas,msiof-r8a774a1",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6e90000 0 0x0064>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 211>;
+ dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+ <&dmac2 0x41>, <&dmac2 0x40>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 211>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6ea0000 {
+ compatible = "renesas,msiof-r8a774a1",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6ea0000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 210>;
+ dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+ <&dmac2 0x43>, <&dmac2 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 210>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6c00000 {
+ compatible = "renesas,msiof-r8a774a1",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c00000 0 0x0064>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 209>;
+ dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 209>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c10000 {
+ compatible = "renesas,msiof-r8a774a1",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c10000 0 0x0064>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 208>;
+ dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 208>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ rcar_sound: sound@ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ /*
+ * #clock-cells is required for audio_clkout0/1/2/3
+ *
+ * clkout : #clock-cells = <0>; <&rcar_sound>;
+ * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE 10>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6",
+ "src.5", "src.4", "src.3", "src.2",
+ "src.1", "src.0",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>,
+ <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>,
+ <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0";
+ status = "disabled";
+
+ rcar_sound,dvc {
+ dvc0: dvc-0 {
+ dmas = <&audma1 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc-1 {
+ dmas = <&audma1 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
+ rcar_sound,src {
+ src0: src-0 {
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x85>, <&audma1 0x9a>;
+ dma-names = "rx", "tx";
+ };
+ src1: src-1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src-2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma1 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src-3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src-4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma1 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ src7: src-7 {
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x93>, <&audma1 0xb6>;
+ dma-names = "rx", "tx";
+ };
+ src8: src-8 {
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x95>, <&audma1 0xb8>;
+ dma-names = "rx", "tx";
+ };
+ src9: src-9 {
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x97>, <&audma1 0xba>;
+ dma-names = "rx", "tx";
+ };
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi-0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi1: ssi-1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi2: ssi-2 {
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi5: ssi-5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi6: ssi-6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi7: ssi-7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi8: ssi-8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi9: ssi-9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,dmac-r8a774a1",
+ "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 502>;
+ clock-names = "fck";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 502>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ audma1: dma-controller@ec720000 {
+ compatible = "renesas,dmac-r8a774a1",
+ "renesas,rcar-dmac";
+ reg = <0 0xec720000 0 0x10000>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 501>;
+ clock-names = "fck";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 501>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ xhci0: usb@ee000000 {
+ compatible = "renesas,xhci-r8a774a1",
+ "renesas,rcar-gen3-xhci";
+ reg = <0 0xee000000 0 0xc00>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 328>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 328>;
+ status = "disabled";
+ };
+
+ usb3_peri0: usb@ee020000 {
+ compatible = "renesas,r8a774a1-usb3-peri",
+ "renesas,rcar-gen3-usb3-peri";
+ reg = <0 0xee020000 0 0x400>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 328>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 328>;
+ status = "disabled";
+ };
+
+ ohci0: usb@ee080000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee080000 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 703>;
+ status = "disabled";
+ };
+
+ ohci1: usb@ee0a0000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee0a0000 0 0x100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 702>;
+ status = "disabled";
+ };
+
+ ehci0: usb@ee080100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee080100 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ companion = <&ohci0>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 703>;
+ status = "disabled";
+ };
+
+ ehci1: usb@ee0a0100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee0a0100 0 0x100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb";
+ companion = <&ohci1>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 702>;
+ status = "disabled";
+ };
+
+ usb2_phy0: usb-phy@ee080200 {
+ compatible = "renesas,usb2-phy-r8a774a1",
+ "renesas,rcar-gen3-usb2-phy";
+ reg = <0 0xee080200 0 0x700>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 703>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb2_phy1: usb-phy@ee0a0200 {
+ compatible = "renesas,usb2-phy-r8a774a1",
+ "renesas,rcar-gen3-usb2-phy";
+ reg = <0 0xee0a0200 0 0x700>;
+ clocks = <&cpg CPG_MOD 702>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 702>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ sdhi0: sd@ee100000 {
+ compatible = "renesas,sdhi-r8a774a1",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee100000 0 0x2000>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 314>;
+ status = "disabled";
+ };
+
+ sdhi1: sd@ee120000 {
+ compatible = "renesas,sdhi-r8a774a1",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee120000 0 0x2000>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 313>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 313>;
+ status = "disabled";
+ };
+
+ sdhi2: sd@ee140000 {
+ compatible = "renesas,sdhi-r8a774a1",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee140000 0 0x2000>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 312>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 312>;
+ status = "disabled";
+ };
+
+ sdhi3: sd@ee160000 {
+ compatible = "renesas,sdhi-r8a774a1",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee160000 0 0x2000>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 311>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 311>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@f1010000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xf1010000 0 0x1000>,
+ <0x0 0xf1020000 0 0x20000>,
+ <0x0 0xf1040000 0 0x20000>,
+ <0x0 0xf1060000 0 0x20000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&cpg CPG_MOD 408>;
+ clock-names = "clk";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 408>;
+ };
+
+ fcpf0: fcp@fe950000 {
+ compatible = "renesas,fcpf";
+ reg = <0 0xfe950000 0 0x200>;
+ clocks = <&cpg CPG_MOD 615>;
+ power-domains = <&sysc 14>;
+ resets = <&cpg 615>;
+ };
+
+ fcpvb0: fcp@fe96f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe96f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 607>;
+ power-domains = <&sysc 14>;
+ resets = <&cpg 607>;
+ };
+
+ fcpvd0: fcp@fea27000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea27000 0 0x200>;
+ clocks = <&cpg CPG_MOD 603>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 603>;
+ iommus = <&ipmmu_vi0 8>;
+ };
+
+ fcpvd1: fcp@fea2f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea2f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 602>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 602>;
+ iommus = <&ipmmu_vi0 9>;
+ };
+
+ fcpvd2: fcp@fea37000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea37000 0 0x200>;
+ clocks = <&cpg CPG_MOD 601>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 601>;
+ iommus = <&ipmmu_vi0 10>;
+ };
+
+ fcpvi0: fcp@fe9af000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9af000 0 0x200>;
+ clocks = <&cpg CPG_MOD 611>;
+ power-domains = <&sysc 14>;
+ resets = <&cpg 611>;
+ iommus = <&ipmmu_vc0 19>;
+ };
+
+ prr: chipid@fff00044 {
+ compatible = "renesas,prr";
+ reg = <0 0xfff00044 0 4>;
+ };
+ };
+
+ thermal-zones {
+ sensor_thermal1: sensor-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
+
+ trips {
+ sensor1_crit: sensor1-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal2: sensor-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 1>;
+
+ trips {
+ sensor2_crit: sensor2-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ };
+
+ sensor_thermal3: sensor-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 2>;
+
+ trips {
+ sensor3_crit: sensor3-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ /* External USB clocks - can be overridden by the board */
+ usb3s0_clk: usb3s0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
index 6b5fa91f1d5d..0895503b69d0 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
@@ -40,12 +40,11 @@
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&cpg CPG_MOD 721>,
- <&cpg CPG_MOD 727>,
<&versaclock5 1>,
<&x21_clk>,
<&x22_clk>,
<&versaclock5 2>;
- clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2", "du.3",
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
index 7b2fbaec9aef..0fb84c219b2f 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7795 ES1.x SoC
+ * Device Tree Source for the R-Car H3 (R8A77950) ES1.x SoC
*
* Copyright (C) 2015 Renesas Electronics Corp.
*/
@@ -232,7 +232,7 @@
port@1 {
vin0csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin0>;
+ remote-endpoint = <&csi21vin0>;
};
};
};
@@ -243,7 +243,7 @@
port@1 {
vin1csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin1>;
+ remote-endpoint = <&csi21vin1>;
};
};
};
@@ -254,7 +254,7 @@
port@1 {
vin2csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin2>;
+ remote-endpoint = <&csi21vin2>;
};
};
};
@@ -265,7 +265,7 @@
port@1 {
vin3csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin3>;
+ remote-endpoint = <&csi21vin3>;
};
};
};
@@ -276,7 +276,7 @@
port@1 {
vin4csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin4>;
+ remote-endpoint = <&csi21vin4>;
};
};
};
@@ -287,7 +287,7 @@
port@1 {
vin5csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin5>;
+ remote-endpoint = <&csi21vin5>;
};
};
};
@@ -298,7 +298,7 @@
port@1 {
vin6csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin6>;
+ remote-endpoint = <&csi21vin6>;
};
};
};
@@ -309,7 +309,7 @@
port@1 {
vin7csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin7>;
+ remote-endpoint = <&csi21vin7>;
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index df50bf46406e..54515eaf0310 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -41,11 +41,10 @@
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&cpg CPG_MOD 721>,
- <&cpg CPG_MOD 727>,
<&versaclock5 1>,
<&versaclock5 3>,
<&versaclock5 4>,
<&versaclock5 2>;
- clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2", "du.3",
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 446822f5751c..1620e8d8dacc 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -40,12 +40,11 @@
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&cpg CPG_MOD 721>,
- <&cpg CPG_MOD 727>,
<&versaclock5 1>,
<&x21_clk>,
<&x22_clk>,
<&versaclock5 2>;
- clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2", "du.3",
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
index 8ded64d0a4d5..cf08a119eec0 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
@@ -40,12 +40,11 @@
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&cpg CPG_MOD 721>,
- <&cpg CPG_MOD 727>,
<&versaclock6 1>,
<&x21_clk>,
<&x22_clk>,
<&versaclock6 2>;
- clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2", "du.3",
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
@@ -152,6 +151,15 @@
};
};
+&pca9654 {
+ pcie_sata_switch {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-low; /* enable SATA by default */
+ line-name = "PCIE/SATA switch";
+ };
+};
+
&pfc {
usb2_pins: usb2 {
groups = "usb2";
@@ -176,6 +184,11 @@
};
};
+/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
+&sata {
+ status = "okay";
+};
+
&usb2_phy2 {
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index fb9d08ad7659..b5f2273caca4 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7795 SoC
+ * Device Tree Source for the R-Car H3 (R8A77950) SoC
*
* Copyright (C) 2015 Renesas Electronics Corp.
*/
@@ -123,7 +123,7 @@
power-domains = <&sysc R8A7795_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
@@ -135,7 +135,7 @@
power-domains = <&sysc R8A7795_PD_CA57_CPU1>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
@@ -147,7 +147,7 @@
power-domains = <&sysc R8A7795_PD_CA57_CPU2>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
@@ -159,7 +159,7 @@
power-domains = <&sysc R8A7795_PD_CA57_CPU3>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
@@ -171,7 +171,7 @@
power-domains = <&sysc R8A7795_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
@@ -182,7 +182,7 @@
power-domains = <&sysc R8A7795_PD_CA53_CPU1>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
@@ -193,7 +193,7 @@
power-domains = <&sysc R8A7795_PD_CA53_CPU2>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
@@ -204,7 +204,7 @@
power-domains = <&sysc R8A7795_PD_CA53_CPU3>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
@@ -455,7 +455,6 @@
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 522>;
#thermal-sensor-cells = <1>;
- status = "okay";
};
intc_ex: interrupt-controller@e61c0000 {
@@ -525,15 +524,6 @@
status = "disabled";
};
- arm_cc630p: crypto@e6601000 {
- compatible = "arm,cryptocell-630p-ree";
- interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0xe6601000 0 0x1000>;
- clocks = <&cpg CPG_MOD 229>;
- resets = <&cpg 229>;
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- };
-
i2c3: i2c@e66d0000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -707,7 +697,7 @@
"renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
@@ -715,7 +705,7 @@
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 704>;
+ resets = <&cpg 704>, <&cpg 703>;
status = "disabled";
};
@@ -724,7 +714,7 @@
"renesas,rcar-gen3-usbhs";
reg = <0 0xe659c000 0 0x100>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 705>;
+ clocks = <&cpg CPG_MOD 705>, <&cpg CPG_MOD 700>;
dmas = <&usb_dmac2 0>, <&usb_dmac2 1>,
<&usb_dmac3 0>, <&usb_dmac3 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
@@ -732,7 +722,7 @@
phys = <&usb2_phy3>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 705>;
+ resets = <&cpg 705>, <&cpg 700>;
status = "disabled";
};
@@ -805,6 +795,15 @@
status = "disabled";
};
+ arm_cc630p: crypto@e6601000 {
+ compatible = "arm,cryptocell-630p-ree";
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0xe6601000 0 0x1000>;
+ clocks = <&cpg CPG_MOD 229>;
+ resets = <&cpg 229>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7795",
"renesas,rcar-dmac";
@@ -1425,11 +1424,11 @@
vin0csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin0>;
+ remote-endpoint = <&csi20vin0>;
};
vin0csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin0>;
+ remote-endpoint = <&csi40vin0>;
};
};
};
@@ -1457,11 +1456,11 @@
vin1csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin1>;
+ remote-endpoint = <&csi20vin1>;
};
vin1csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin1>;
+ remote-endpoint = <&csi40vin1>;
};
};
};
@@ -1489,11 +1488,11 @@
vin2csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin2>;
+ remote-endpoint = <&csi20vin2>;
};
vin2csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin2>;
+ remote-endpoint = <&csi40vin2>;
};
};
};
@@ -1521,11 +1520,11 @@
vin3csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin3>;
+ remote-endpoint = <&csi20vin3>;
};
vin3csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin3>;
+ remote-endpoint = <&csi40vin3>;
};
};
};
@@ -1553,11 +1552,11 @@
vin4csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin4>;
+ remote-endpoint = <&csi20vin4>;
};
vin4csi41: endpoint@3 {
reg = <3>;
- remote-endpoint= <&csi41vin4>;
+ remote-endpoint = <&csi41vin4>;
};
};
};
@@ -1585,11 +1584,11 @@
vin5csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin5>;
+ remote-endpoint = <&csi20vin5>;
};
vin5csi41: endpoint@3 {
reg = <3>;
- remote-endpoint= <&csi41vin5>;
+ remote-endpoint = <&csi41vin5>;
};
};
};
@@ -1617,11 +1616,11 @@
vin6csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin6>;
+ remote-endpoint = <&csi20vin6>;
};
vin6csi41: endpoint@3 {
reg = <3>;
- remote-endpoint= <&csi41vin6>;
+ remote-endpoint = <&csi41vin6>;
};
};
};
@@ -1649,11 +1648,11 @@
vin7csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin7>;
+ remote-endpoint = <&csi20vin7>;
};
vin7csi41: endpoint@3 {
reg = <3>;
- remote-endpoint= <&csi41vin7>;
+ remote-endpoint = <&csi41vin7>;
};
};
};
@@ -2098,11 +2097,11 @@
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
@@ -2134,11 +2133,11 @@
compatible = "generic-ohci";
reg = <0 0xee0e0000 0 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 700>;
+ clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
phys = <&usb2_phy3>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 700>;
+ resets = <&cpg 700>, <&cpg 705>;
status = "disabled";
};
@@ -2146,12 +2145,12 @@
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
@@ -2185,12 +2184,12 @@
compatible = "generic-ehci";
reg = <0 0xee0e0100 0 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 700>;
+ clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
phys = <&usb2_phy3>;
phy-names = "usb";
companion = <&ohci3>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 700>;
+ resets = <&cpg 700>, <&cpg 705>;
status = "disabled";
};
@@ -2199,9 +2198,9 @@
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>;
status = "disabled";
};
@@ -2233,9 +2232,9 @@
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee0e0200 0 0x700>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 700>;
+ clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 700>;
+ resets = <&cpg 700>, <&cpg 705>;
#phy-cells = <0>;
status = "disabled";
};
@@ -2782,9 +2781,7 @@
du: display@feb00000 {
compatible = "renesas,du-r8a7795";
- reg = <0 0xfeb00000 0 0x80000>,
- <0 0xfeb90000 0 0x14>;
- reg-names = "du", "lvds.0";
+ reg = <0 0xfeb00000 0 0x80000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
@@ -2792,9 +2789,8 @@
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 721>,
- <&cpg CPG_MOD 727>;
- clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
+ <&cpg CPG_MOD 721>;
+ clock-names = "du.0", "du.1", "du.2", "du.3";
vsps = <&vspd0 0 &vspd1 0 &vspd2 0 &vspd0 1>;
status = "disabled";
@@ -2822,6 +2818,33 @@
port@3 {
reg = <3>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a7795-lvds";
+ reg = <0 0xfeb90000 0 0x14>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index cbd8acbf537e..9e4594c27fa6 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -30,10 +30,9 @@
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 727>,
<&versaclock5 1>,
<&versaclock5 3>,
<&versaclock5 2>;
- clock-names = "du.0", "du.1", "du.2", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2",
"dclkin.0", "dclkin.1", "dclkin.2";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index 052d72acc862..b4f9567cb9f8 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -29,11 +29,10 @@
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 727>,
<&versaclock5 1>,
<&x21_clk>,
<&versaclock5 2>;
- clock-names = "du.0", "du.1", "du.2", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2",
"dclkin.0", "dclkin.1", "dclkin.2";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index cbd35c00b4af..1ec6aaa520c1 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7796 SoC
+ * Device Tree Source for the R-Car M3-W (R8A77960) SoC
*
* Copyright (C) 2016-2017 Renesas Electronics Corp.
*/
@@ -134,7 +134,7 @@
power-domains = <&sysc R8A7796_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
@@ -146,7 +146,7 @@
power-domains = <&sysc R8A7796_PD_CA57_CPU1>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
@@ -158,7 +158,7 @@
power-domains = <&sysc R8A7796_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
@@ -169,7 +169,7 @@
power-domains = <&sysc R8A7796_PD_CA53_CPU1>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
@@ -180,7 +180,7 @@
power-domains = <&sysc R8A7796_PD_CA53_CPU2>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
@@ -191,7 +191,7 @@
power-domains = <&sysc R8A7796_PD_CA53_CPU3>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
@@ -434,7 +434,6 @@
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 522>;
#thermal-sensor-cells = <1>;
- status = "okay";
};
intc_ex: interrupt-controller@e61c0000 {
@@ -677,7 +676,7 @@
"renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
@@ -685,7 +684,7 @@
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
- resets = <&cpg 704>;
+ resets = <&cpg 704>, <&cpg 703>;
status = "disabled";
};
@@ -1299,11 +1298,11 @@
vin0csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin0>;
+ remote-endpoint = <&csi20vin0>;
};
vin0csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin0>;
+ remote-endpoint = <&csi40vin0>;
};
};
};
@@ -1331,11 +1330,11 @@
vin1csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin1>;
+ remote-endpoint = <&csi20vin1>;
};
vin1csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin1>;
+ remote-endpoint = <&csi40vin1>;
};
};
};
@@ -1363,11 +1362,11 @@
vin2csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin2>;
+ remote-endpoint = <&csi20vin2>;
};
vin2csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin2>;
+ remote-endpoint = <&csi40vin2>;
};
};
};
@@ -1395,11 +1394,11 @@
vin3csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin3>;
+ remote-endpoint = <&csi20vin3>;
};
vin3csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin3>;
+ remote-endpoint = <&csi40vin3>;
};
};
};
@@ -1427,11 +1426,11 @@
vin4csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin4>;
+ remote-endpoint = <&csi20vin4>;
};
vin4csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin4>;
+ remote-endpoint = <&csi40vin4>;
};
};
};
@@ -1459,11 +1458,11 @@
vin5csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin5>;
+ remote-endpoint = <&csi20vin5>;
};
vin5csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin5>;
+ remote-endpoint = <&csi40vin5>;
};
};
};
@@ -1491,11 +1490,11 @@
vin6csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin6>;
+ remote-endpoint = <&csi20vin6>;
};
vin6csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin6>;
+ remote-endpoint = <&csi40vin6>;
};
};
};
@@ -1523,11 +1522,11 @@
vin7csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin7>;
+ remote-endpoint = <&csi20vin7>;
};
vin7csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin7>;
+ remote-endpoint = <&csi40vin7>;
};
};
};
@@ -1970,11 +1969,11 @@
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
@@ -1994,12 +1993,12 @@
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
- companion= <&ohci0>;
+ companion = <&ohci0>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
@@ -2010,7 +2009,7 @@
clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>;
phy-names = "usb";
- companion= <&ohci1>;
+ companion = <&ohci1>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 702>;
status = "disabled";
@@ -2021,9 +2020,9 @@
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>;
status = "disabled";
};
@@ -2437,17 +2436,14 @@
du: display@feb00000 {
compatible = "renesas,du-r8a7796";
- reg = <0 0xfeb00000 0 0x70000>,
- <0 0xfeb90000 0 0x14>;
- reg-names = "du", "lvds.0";
+ reg = <0 0xfeb00000 0 0x70000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
- <&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 727>;
- clock-names = "du.0", "du.1", "du.2", "lvds.0";
+ <&cpg CPG_MOD 722>;
+ clock-names = "du.0", "du.1", "du.2";
status = "disabled";
vsps = <&vspd0 &vspd1 &vspd2>;
@@ -2470,6 +2466,33 @@
port@2 {
reg = <2>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a7796-lvds";
+ reg = <0 0xfeb90000 0 0x14>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts
new file mode 100644
index 000000000000..dadad97051b9
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3NULCB Kingfisher board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+#include "r8a77965-m3nulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+ model = "Renesas M3NULCB Kingfisher board based on r8a77965";
+ compatible = "shimafuji,kingfisher", "renesas,m3nulcb",
+ "renesas,r8a77965";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts b/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts
new file mode 100644
index 000000000000..964078b6cc49
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77965.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+ model = "Renesas M3NULCB board based on r8a77965";
+ compatible = "renesas,m3nulcb", "renesas,r8a77965";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 721>,
+ <&versaclock5 1>,
+ <&versaclock5 3>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.3",
+ "dclkin.0", "dclkin.1", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts
index 9de4e3db1621..f03a5e9e0c42 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts
@@ -47,3 +47,17 @@
&hdmi0_con {
remote-endpoint = <&rcar_dw_hdmi0_out>;
};
+
+&pca9654 {
+ pcie_sata_switch {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-low; /* enable SATA by default */
+ line-name = "PCIE/SATA switch";
+ };
+};
+
+/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 0cd44461a0bd..83946ca2eba5 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a77965 SoC
+ * Device Tree Source for the R-Car M3-N (R8A77965) SoC
*
* Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
*
@@ -12,7 +12,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a77965-sysc.h>
-#define CPG_AUDIO_CLK_I 10
+#define CPG_AUDIO_CLK_I R8A77965_CLK_S0D4
/ {
compatible = "renesas,r8a77965";
@@ -60,6 +60,46 @@
clock-frequency = <0>;
};
+ cluster0_opp: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <830000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <830000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <830000>;
+ clock-latency-ns = <300000>;
+ opp-suspend;
+ };
+ opp-1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+ opp-1700000000 {
+ opp-hz = /bits/ 64 <1700000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <960000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -71,6 +111,8 @@
power-domains = <&sysc R8A77965_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
+ clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
+ operating-points-v2 = <&cluster0_opp>;
};
a57_1: cpu@1 {
@@ -80,6 +122,8 @@
power-domains = <&sysc R8A77965_PD_CA57_CPU1>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
+ clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
+ operating-points-v2 = <&cluster0_opp>;
};
L2_CA57: cache-controller-0 {
@@ -306,7 +350,6 @@
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 522>;
#thermal-sensor-cells = <1>;
- status = "okay";
};
intc_ex: interrupt-controller@e61c0000 {
@@ -545,11 +588,11 @@
};
hsusb: usb@e6590000 {
- compatible = "renesas,usbhs-r8a7796",
+ compatible = "renesas,usbhs-r8a77965",
"renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
@@ -557,7 +600,7 @@
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
- resets = <&cpg 704>;
+ resets = <&cpg 704>, <&cpg 703>;
status = "disabled";
};
@@ -634,6 +677,14 @@
resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+ <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+ <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+ <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+ <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+ <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+ <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+ <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
};
dmac1: dma-controller@e7300000 {
@@ -668,6 +719,14 @@
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+ <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+ <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+ <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+ <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+ <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+ <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+ <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
};
dmac2: dma-controller@e7310000 {
@@ -702,6 +761,14 @@
resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+ <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+ <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+ <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+ <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+ <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+ <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+ <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
};
ipmmu_ds0: mmu@e6740000 {
@@ -838,6 +905,16 @@
status = "disabled";
};
+ can0: can@e6c30000 {
+ reg = <0 0xe6c30000 0 0x1000>;
+ /* placeholder */
+ };
+
+ can1: can@e6c38000 {
+ reg = <0 0xe6c38000 0 0x1000>;
+ /* placeholder */
+ };
+
pwm0: pwm@e6e30000 {
compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
reg = <0 0xe6e30000 0 8>;
@@ -1089,11 +1166,11 @@
vin0csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin0>;
+ remote-endpoint = <&csi20vin0>;
};
vin0csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin0>;
+ remote-endpoint = <&csi40vin0>;
};
};
};
@@ -1121,11 +1198,11 @@
vin1csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin1>;
+ remote-endpoint = <&csi20vin1>;
};
vin1csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin1>;
+ remote-endpoint = <&csi40vin1>;
};
};
};
@@ -1153,11 +1230,11 @@
vin2csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin2>;
+ remote-endpoint = <&csi20vin2>;
};
vin2csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin2>;
+ remote-endpoint = <&csi40vin2>;
};
};
};
@@ -1185,11 +1262,11 @@
vin3csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin3>;
+ remote-endpoint = <&csi20vin3>;
};
vin3csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin3>;
+ remote-endpoint = <&csi40vin3>;
};
};
};
@@ -1217,11 +1294,11 @@
vin4csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin4>;
+ remote-endpoint = <&csi20vin4>;
};
vin4csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin4>;
+ remote-endpoint = <&csi40vin4>;
};
};
};
@@ -1249,11 +1326,11 @@
vin5csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin5>;
+ remote-endpoint = <&csi20vin5>;
};
vin5csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin5>;
+ remote-endpoint = <&csi40vin5>;
};
};
};
@@ -1281,11 +1358,11 @@
vin6csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin6>;
+ remote-endpoint = <&csi20vin6>;
};
vin6csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin6>;
+ remote-endpoint = <&csi40vin6>;
};
};
};
@@ -1313,57 +1390,280 @@
vin7csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin7>;
+ remote-endpoint = <&csi20vin7>;
};
vin7csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin7>;
+ remote-endpoint = <&csi40vin7>;
};
};
};
};
rcar_sound: sound@ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ /*
+ * #clock-cells is required for audio_clkout0/1/2/3
+ *
+ * clkout : #clock-cells = <0>; <&rcar_sound>;
+ * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a77965", "renesas,rcar_sound-gen3";
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
<0 0xec541000 0 0x280>, /* SSI */
<0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
- /* placeholder */
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE R8A77965_CLK_S0D4>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6",
+ "src.5", "src.4", "src.3", "src.2",
+ "src.1", "src.0",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>,
+ <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>,
+ <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0";
+ status = "disabled";
rcar_sound,dvc {
dvc0: dvc-0 {
+ dmas = <&audma1 0xbc>;
+ dma-names = "tx";
};
dvc1: dvc-1 {
+ dmas = <&audma1 0xbe>;
+ dma-names = "tx";
};
};
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
rcar_sound,src {
src0: src-0 {
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x85>, <&audma1 0x9a>;
+ dma-names = "rx", "tx";
};
src1: src-1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src-2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma1 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src-3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src-4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma1 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ src7: src-7 {
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x93>, <&audma1 0xb6>;
+ dma-names = "rx", "tx";
+ };
+ src8: src-8 {
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x95>, <&audma1 0xb8>;
+ dma-names = "rx", "tx";
+ };
+ src9: src-9 {
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x97>, <&audma1 0xba>;
+ dma-names = "rx", "tx";
};
};
rcar_sound,ssi {
ssi0: ssi-0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi1: ssi-1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
- };
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
+ ssi2: ssi-2 {
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
- port@1 {
- reg = <1>;
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi5: ssi-5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi6: ssi-6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi7: ssi-7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi8: ssi-8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi9: ssi-9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
};
};
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,dmac-r8a77965",
+ "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 502>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ audma1: dma-controller@ec720000 {
+ compatible = "renesas,dmac-r8a77965",
+ "renesas,rcar-dmac";
+ reg = <0 0xec720000 0 0x10000>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 501>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 501>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
xhci0: usb@ee000000 {
compatible = "renesas,xhci-r8a77965",
"renesas,rcar-gen3-xhci";
@@ -1390,11 +1690,11 @@
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
@@ -1414,12 +1714,12 @@
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
@@ -1441,9 +1741,9 @@
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>;
status = "disabled";
};
@@ -1452,9 +1752,9 @@
compatible = "renesas,usb2-phy-r8a77965",
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee0a0200 0 0x700>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 702>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 702>;
#phy-cells = <0>;
status = "disabled";
};
@@ -1507,6 +1807,17 @@
status = "disabled";
};
+ sata: sata@ee300000 {
+ compatible = "renesas,sata-r8a77965",
+ "renesas,rcar-gen3-sata";
+ reg = <0 0xee300000 0 0x200000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 815>;
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 815>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -1578,6 +1889,16 @@
status = "disabled";
};
+ fdp1@fe940000 {
+ compatible = "renesas,fdp1";
+ reg = <0 0xfe940000 0 0x2400>;
+ interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 119>;
+ power-domains = <&sysc R8A77965_PD_A3VP>;
+ resets = <&cpg 119>;
+ renesas,fcp = <&fcpf0>;
+ };
+
fcpf0: fcp@fe950000 {
compatible = "renesas,fcpf";
reg = <0 0xfe950000 0 0x200>;
@@ -1843,14 +2164,6 @@
};
};
- timer {
- compatible = "arm,armv8-timer";
- interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
thermal-zones {
sensor_thermal1: sensor-thermal1 {
polling-delay-passive = <250>;
@@ -1895,6 +2208,14 @@
};
};
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
/* External USB clocks - can be overridden by the board */
usb3s0_clk: usb3s0 {
compatible = "fixed-clock";
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
index 8eac8ca6550b..0dbcb4cccc18 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -51,6 +51,15 @@
regulator-always-on;
};
+ vcc_vddq_vin0: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_VDDQ_VIN0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
lvds-decoder {
compatible = "thine,thc63lvd1024";
vcc-supply = <&vcc_d3_3v>;
@@ -128,6 +137,12 @@
function = "i2c0";
};
+ mmc_pins: mmc_3_3v {
+ groups = "mmc_data8", "mmc_ctrl";
+ function = "mmc";
+ power-source = <3300>;
+ };
+
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
@@ -192,6 +207,17 @@
};
};
+&mmc0 {
+ pinctrl-0 = <&mmc_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_d3_3v>;
+ vqmmc-supply = <&vcc_vddq_vin0>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
&scif0 {
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index 954168858fed..cba7885cf7c3 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a77970 SoC
+ * Device Tree Source for the R-Car V3M (R8A77970) SoC
*
* Copyright (C) 2016-2017 Renesas Electronics Corp.
* Copyright (C) 2017 Cogent Embedded, Inc.
@@ -24,6 +24,13 @@
i2c4 = &i2c4;
};
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -82,13 +89,6 @@
method = "smc";
};
- /* External CAN clock - to be overridden by boards that provide it */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
/* External SCIF clock - to be overridden by boards that provide it */
scif_clk: scif {
compatible = "fixed-clock";
@@ -209,6 +209,76 @@
reg = <0 0xe6060000 0 0x504>;
};
+ cmt0: timer@e60f0000 {
+ compatible = "renesas,r8a77970-cmt0",
+ "renesas,rcar-gen3-cmt0";
+ reg = <0 0xe60f0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 303>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 303>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a77970-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 302>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 302>;
+ status = "disabled";
+ };
+
+ cmt2: timer@e6140000 {
+ compatible = "renesas,r8a77970-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6140000 0 0x1004>;
+ interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 301>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 301>;
+ status = "disabled";
+ };
+
+ cmt3: timer@e6148000 {
+ compatible = "renesas,r8a77970-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6148000 0 0x1004>;
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 300>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 300>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a77970-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
@@ -544,6 +614,16 @@
status = "disabled";
};
+ tpu: pwm@e6e80000 {
+ compatible = "renesas,tpu-r8a77970", "renesas,tpu";
+ reg = <0 0xe6e80000 0 0x148>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 304>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 304>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a77970";
@@ -567,7 +647,7 @@
vin0csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin0>;
+ remote-endpoint = <&csi40vin0>;
};
};
};
@@ -595,7 +675,7 @@
vin1csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin1>;
+ remote-endpoint = <&csi40vin1>;
};
};
};
@@ -623,7 +703,7 @@
vin2csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin2>;
+ remote-endpoint = <&csi40vin2>;
};
};
};
@@ -651,7 +731,7 @@
vin3csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin3>;
+ remote-endpoint = <&csi40vin3>;
};
};
};
@@ -754,6 +834,18 @@
#iommu-cells = <1>;
};
+ mmc0: mmc@ee140000 {
+ compatible = "renesas,sdhi-r8a77970",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee140000 0 0x2000>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
+ max-frequency = <200000000>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index 9f25c407dfd7..fe2e2c051cc9 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -45,6 +45,56 @@
regulator-boot-on;
regulator-always-on;
};
+
+ d1_8v: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "D1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&d3_3v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ x1_clk: x1-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
};
&avb {
@@ -74,6 +124,13 @@
};
};
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&x1_clk>;
+ clock-names = "du.0", "dclkin.0";
+ status = "okay";
+};
+
&extal_clk {
clock-frequency = <16666666>;
};
@@ -102,6 +159,55 @@
gpio-controller;
#gpio-cells = <2>;
};
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&d1_8v>;
+ dvdd-supply = <&d1_8v>;
+ pvdd-supply = <&d1_8v>;
+ bgvdd-supply = <&d1_8v>;
+ dvdd-3v-supply = <&d3_3v>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
};
&mmc0 {
@@ -117,6 +223,18 @@
status = "okay";
};
+&pciec {
+ status = "okay";
+};
+
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
&pfc {
avb_pins: avb {
groups = "avb_mdio", "avb_rgmii";
@@ -156,6 +274,11 @@
};
};
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
&scif0 {
pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
index 9dac42f8f804..dd14a41b32cd 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -27,6 +27,72 @@
/* first 128MB is reserved for secure area. */
reg = <0 0x48000000 0 0x78000000>;
};
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&vcc3v3_d5>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ osc1_clk: osc1-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
+
+ vcc1v8_d4: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC1V8_D4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc3v3_d5: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3_D5";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&osc1_clk>;
+ clock-names = "du.0", "dclkin.0";
+ status = "okay";
};
&extal_clk {
@@ -53,6 +119,64 @@
};
};
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ #sound-dai-cells = <0>;
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&vcc1v8_d4>;
+ dvdd-supply = <&vcc1v8_d4>;
+ pvdd-supply = <&vcc1v8_d4>;
+ bgvdd-supply = <&vcc1v8_d4>;
+ dvdd-3v-supply = <&vcc3v3_d5>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
+};
+
&pfc {
gether_pins: gether {
groups = "gether_mdio_a", "gether_rgmii",
@@ -60,6 +184,11 @@
function = "gether";
};
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
@@ -71,6 +200,11 @@
};
};
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
&scif0 {
pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index b8c9a56562f2..d4952b527d14 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a77980 SoC
+ * Device Tree Source for the R-Car V3H (R8A77980) SoC
*
* Copyright (C) 2018 Renesas Electronics Corp.
* Copyright (C) 2018 Cogent Embedded, Inc.
@@ -25,6 +25,13 @@
i2c5 = &i2c5;
};
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -77,27 +84,36 @@
};
};
- /* External CAN clock - to be overridden by boards that provide it */
- can_clk: can {
+ extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
+ /* This value must be overridden by the board */
clock-frequency = <0>;
};
- extal_clk: extal {
+ extalr_clk: extalr {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
- extalr_clk: extalr {
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
compatible = "fixed-clock";
#clock-cells = <0>;
- /* This value must be overridden by the board */
clock-frequency = <0>;
};
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+ };
+
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
@@ -118,6 +134,16 @@
#size-cells = <2>;
ranges;
+ rwdt: watchdog@e6020000 {
+ compatible = "renesas,r8a77980-wdt",
+ "renesas,rcar-gen3-wdt";
+ reg = <0 0xe6020000 0 0x0c>;
+ clocks = <&cpg CPG_MOD 402>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 402>;
+ status = "disabled";
+ };
+
gpio0: gpio@e6050000 {
compatible = "renesas,gpio-r8a77980",
"renesas,rcar-gen3-gpio";
@@ -213,6 +239,76 @@
reg = <0 0xe6060000 0 0x50c>;
};
+ cmt0: timer@e60f0000 {
+ compatible = "renesas,r8a77980-cmt0",
+ "renesas,rcar-gen3-cmt0";
+ reg = <0 0xe60f0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 303>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 303>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a77980-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 302>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 302>;
+ status = "disabled";
+ };
+
+ cmt2: timer@e6140000 {
+ compatible = "renesas,r8a77980-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6140000 0 0x1004>;
+ interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 301>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 301>;
+ status = "disabled";
+ };
+
+ cmt3: timer@e6148000 {
+ compatible = "renesas,r8a77980-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6148000 0 0x1004>;
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 300>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 300>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a77980-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
@@ -418,6 +514,16 @@
status = "disabled";
};
+ pcie_phy: pcie-phy@e65d0000 {
+ compatible = "renesas,r8a77980-pcie-phy";
+ reg = <0 0xe65d0000 0 0x8000>;
+ #phy-cells = <0>;
+ clocks = <&cpg CPG_MOD 319>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
+ status = "disabled";
+ };
+
canfd: can@e66c0000 {
compatible = "renesas,r8a77980-canfd",
"renesas,rcar-gen3-canfd";
@@ -443,69 +549,6 @@
};
};
- ipmmu_ds1: mmu@e7740000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xe7740000 0 0x1000>;
- renesas,ipmmu-main = <&ipmmu_mm 0>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_vip0: mmu@e7b00000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xe7b00000 0 0x1000>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_vip1: mmu@e7960000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xe7960000 0 0x1000>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_ir: mmu@ff8b0000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xff8b0000 0 0x1000>;
- renesas,ipmmu-main = <&ipmmu_mm 3>;
- power-domains = <&sysc R8A77980_PD_A3IR>;
- #iommu-cells = <1>;
- };
-
- ipmmu_mm: mmu@e67b0000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xe67b0000 0 0x1000>;
- interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_rt: mmu@ffc80000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xffc80000 0 0x1000>;
- renesas,ipmmu-main = <&ipmmu_mm 10>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_vc0: mmu@fe6b0000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xfe6b0000 0 0x1000>;
- renesas,ipmmu-main = <&ipmmu_mm 12>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_vi0: mmu@febd0000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xfebd0000 0 0x1000>;
- renesas,ipmmu-main = <&ipmmu_mm 14>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
avb: ethernet@e6800000 {
compatible = "renesas,etheravb-r8a77980",
"renesas,etheravb-rcar-gen3";
@@ -623,6 +666,313 @@
status = "disabled";
};
+ tpu: pwm@e6e80000 {
+ compatible = "renesas,tpu-r8a77980", "renesas,tpu";
+ reg = <0 0xe6e80000 0 0x148>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 304>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 304>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ vin0: video@e6ef0000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 811>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 811>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin0csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin0>;
+ };
+ };
+ };
+ };
+
+ vin1: video@e6ef1000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 810>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ status = "disabled";
+ resets = <&cpg 810>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin1csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin1>;
+ };
+ };
+ };
+ };
+
+ vin2: video@e6ef2000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef2000 0 0x1000>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 809>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 809>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin2csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin2>;
+ };
+ };
+ };
+ };
+
+ vin3: video@e6ef3000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef3000 0 0x1000>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 808>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 808>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin3csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin3>;
+ };
+ };
+ };
+ };
+
+ vin4: video@e6ef4000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef4000 0 0x1000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 807>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 807>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin4csi41: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi41vin4>;
+ };
+ };
+ };
+ };
+
+ vin5: video@e6ef5000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef5000 0 0x1000>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 806>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 806>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin5csi41: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi41vin5>;
+ };
+ };
+ };
+ };
+
+ vin6: video@e6ef6000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef6000 0 0x1000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 805>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 805>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin6csi41: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi41vin6>;
+ };
+ };
+ };
+ };
+
+ vin7: video@e6ef7000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef7000 0 0x1000>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 804>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 804>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin7csi41: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi41vin7>;
+ };
+ };
+ };
+ };
+
+ vin8: video@e6ef8000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef8000 0 0x1000>;
+ interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 628>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 628>;
+ status = "disabled";
+ };
+
+ vin9: video@e6ef9000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef9000 0 0x1000>;
+ interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 627>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 627>;
+ status = "disabled";
+ };
+
+ vin10: video@e6efa000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6efa000 0 0x1000>;
+ interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 625>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 625>;
+ status = "disabled";
+ };
+
+ vin11: video@e6efb000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6efb000 0 0x1000>;
+ interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 618>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 618>;
+ status = "disabled";
+ };
+
+ vin12: video@e6efc000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6efc000 0 0x1000>;
+ interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 612>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 612>;
+ status = "disabled";
+ };
+
+ vin13: video@e6efd000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6efd000 0 0x1000>;
+ interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 608>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 608>;
+ status = "disabled";
+ };
+
+ vin14: video@e6efe000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6efe000 0 0x1000>;
+ interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 605>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 605>;
+ status = "disabled";
+ };
+
+ vin15: video@e6eff000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6eff000 0 0x1000>;
+ interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 604>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 604>;
+ status = "disabled";
+ };
+
dmac1: dma-controller@e7300000 {
compatible = "renesas,dmac-r8a77980",
"renesas,rcar-dmac";
@@ -655,6 +1005,14 @@
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+ <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+ <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+ <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+ <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+ <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+ <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+ <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
};
dmac2: dma-controller@e7310000 {
@@ -689,6 +1047,14 @@
resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+ <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+ <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+ <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+ <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+ <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+ <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+ <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
};
gether: ethernet@e7400000 {
@@ -703,6 +1069,69 @@
status = "disabled";
};
+ ipmmu_ds1: mmu@e7740000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xe7740000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 0>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_ir: mmu@ff8b0000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xff8b0000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 3>;
+ power-domains = <&sysc R8A77980_PD_A3IR>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_mm: mmu@e67b0000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xe67b0000 0 0x1000>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_rt: mmu@ffc80000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xffc80000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 10>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vc0: mmu@fe6b0000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xfe6b0000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 12>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vi0: mmu@febd0000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xfebd0000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 14>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vip0: mmu@e7b00000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xe7b00000 0 0x1000>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vip1: mmu@e7960000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xe7960000 0 0x1000>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
mmc0: mmc@ee140000 {
compatible = "renesas,sdhi-r8a77980",
"renesas,rcar-gen3-sdhi";
@@ -732,6 +1161,38 @@
resets = <&cpg 408>;
};
+ pciec: pcie@fe000000 {
+ compatible = "renesas,pcie-r8a77980",
+ "renesas,pcie-rcar-gen3";
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <
+ 0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000
+ 0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000
+ 0x02000000 0 0x30000000 0 0x30000000 0 0x8000000
+ 0x42000000 0 0x38000000 0 0x38000000 0 0x8000000
+ >;
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000
+ 0 0x80000000>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 148
+ IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
+ phys = <&pcie_phy>;
+ phy-names = "pcie";
+ status = "disabled";
+ };
+
vspd0: vsp@fea20000 {
compatible = "renesas,vsp2";
reg = <0 0xfea20000 0 0x5000>;
@@ -750,6 +1211,84 @@
resets = <&cpg 603>;
};
+ csi40: csi2@feaa0000 {
+ compatible = "renesas,r8a77980-csi2";
+ reg = <0 0xfeaa0000 0 0x10000>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ csi40vin0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vin0csi40>;
+ };
+ csi40vin1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vin1csi40>;
+ };
+ csi40vin2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&vin2csi40>;
+ };
+ csi40vin3: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&vin3csi40>;
+ };
+ };
+ };
+ };
+
+ csi41: csi2@feab0000 {
+ compatible = "renesas,r8a77980-csi2";
+ reg = <0 0xfeab0000 0 0x10000>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 715>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 715>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ csi41vin4: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vin4csi41>;
+ };
+ csi41vin5: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vin5csi41>;
+ };
+ csi41vin6: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&vin6csi41>;
+ };
+ csi41vin7: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&vin7csi41>;
+ };
+ };
+ };
+ };
+
du: display@feb00000 {
compatible = "renesas,du-r8a77980",
"renesas,du-r8a77970";
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 2bc3a4884b00..f342dd85b152 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -28,6 +28,111 @@
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+
+ cvbs-in {
+ compatible = "composite-video-connector";
+ label = "CVBS IN";
+
+ port {
+ cvbs_con: endpoint {
+ remote-endpoint = <&adv7482_ain7>;
+ };
+ };
+ };
+
+ hdmi-in {
+ compatible = "hdmi-connector";
+ label = "HDMI IN";
+ type = "a";
+
+ port {
+ hdmi_in_con: endpoint {
+ remote-endpoint = <&adv7482_hdmi>;
+ };
+ };
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_out: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&reg_3p3v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
+ };
+ };
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ x13_clk: x13 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
};
&avb {
@@ -47,6 +152,41 @@
};
};
+&csi40 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+
+ csi40_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&adv7482_txa>;
+ };
+ };
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&x13_clk>;
+ clock-names = "du.0", "du.1", "dclkin.0";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
+ };
+};
+
&ehci0 {
status = "okay";
};
@@ -55,6 +195,105 @@
clock-frequency = <48000000>;
};
+&i2c0 {
+ status = "okay";
+
+ hdmi-encoder@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+
+ video-receiver@70 {
+ compatible = "adi,adv7482";
+ reg = <0x70>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&gpio0>;
+ interrupt-names = "intrq1", "intrq2";
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
+ <17 IRQ_TYPE_LEVEL_LOW>;
+
+ port@7 {
+ reg = <7>;
+
+ adv7482_ain7: endpoint {
+ remote-endpoint = <&cvbs_con>;
+ };
+ };
+
+ port@8 {
+ reg = <8>;
+
+ adv7482_hdmi: endpoint {
+ remote-endpoint = <&hdmi_in_con>;
+ };
+ };
+
+ port@a {
+ reg = <0xa>;
+
+ adv7482_txa: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 727>,
+ <&x13_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
+};
+
+&lvds1 {
+ clocks = <&cpg CPG_MOD 727>,
+ <&x13_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+};
+
&ohci0 {
status = "okay";
};
@@ -67,6 +306,21 @@
};
};
+ du_pins: du {
+ groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+ function = "du";
+ };
+
+ pwm3_pins: pwm3 {
+ groups = "pwm3_b";
+ function = "pwm3";
+ };
+
+ pwm5_pins: pwm5 {
+ groups = "pwm5_a";
+ function = "pwm5";
+ };
+
usb0_pins: usb {
groups = "usb0_b";
function = "usb0";
@@ -78,6 +332,20 @@
};
};
+&pwm3 {
+ pinctrl-0 = <&pwm3_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pwm5 {
+ pinctrl-0 = <&pwm5_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
&rwdt {
timeout-sec = <60>;
status = "okay";
@@ -94,6 +362,10 @@
status = "okay";
};
+&vin4 {
+ status = "okay";
+};
+
&xhci0 {
pinctrl-0 = <&usb30_pins>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index ae89260baad9..9509dc05665f 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -1,11 +1,11 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Device Tree Source for the r8a77990 SoC
+ * Device Tree Source for the R-Car E3 (R8A77990) SoC
*
* Copyright (C) 2018 Renesas Electronics Corp.
*/
-#include <dt-bindings/clock/renesas-cpg-mssr.h>
+#include <dt-bindings/clock/r8a77990-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a77990-sysc.h>
@@ -14,6 +14,17 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -22,7 +33,7 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0>;
device_type = "cpu";
- power-domains = <&sysc 5>;
+ power-domains = <&sysc R8A77990_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
};
@@ -31,14 +42,14 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <1>;
device_type = "cpu";
- power-domains = <&sysc 6>;
+ power-domains = <&sysc R8A77990_PD_CA53_CPU1>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
};
L2_CA53: cache-controller-0 {
compatible = "cache";
- power-domains = <&sysc 21>;
+ power-domains = <&sysc R8A77990_PD_CA53_SCU>;
cache-unified;
cache-level = <2>;
};
@@ -63,6 +74,13 @@
method = "smc";
};
+ /* External SCIF clock - to be overridden by boards that provide it */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
soc: soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
@@ -75,7 +93,7 @@
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
clocks = <&cpg CPG_MOD 402>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 402>;
status = "disabled";
};
@@ -91,7 +109,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 912>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 912>;
};
@@ -106,7 +124,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 911>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 911>;
};
@@ -121,7 +139,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 910>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 910>;
};
@@ -136,7 +154,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 909>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 909>;
};
@@ -151,7 +169,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 908>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 908>;
};
@@ -166,7 +184,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 907>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 907>;
};
@@ -181,10 +199,122 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 906>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 906>;
};
+ i2c0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6510000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e66d0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e66d8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d8000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e66e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e0000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@e66e8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e8000 0 0x40>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@e6690000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6690000 0 0x40>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1003>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 1003>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
pfc: pin-controller@e6060000 {
compatible = "renesas,pfc-r8a77990";
reg = <0 0xe6060000 0 0x508>;
@@ -211,6 +341,132 @@
#power-domain-cells = <1>;
};
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a77990",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x10000>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 219>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+ <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+ <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+ <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+ <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+ <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+ <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+ <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+ };
+
+ dmac1: dma-controller@e7300000 {
+ compatible = "renesas,dmac-r8a77990",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7300000 0 0x10000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 218>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+ <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+ <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+ <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+ <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+ <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+ <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+ <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+ };
+
+ dmac2: dma-controller@e7310000 {
+ compatible = "renesas,dmac-r8a77990",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7310000 0 0x10000>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 217>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 217>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+ <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+ <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+ <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+ <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+ <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+ <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+ <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+ };
+
ipmmu_ds0: mmu@e6740000 {
compatible = "renesas,ipmmu-r8a77990";
reg = <0 0xe6740000 0 0x1000>;
@@ -329,7 +585,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
#address-cells = <1>;
@@ -337,18 +593,191 @@
status = "disabled";
};
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
scif2: serial@e6e88000 {
compatible = "renesas,scif-r8a77990",
"renesas,rcar-gen3-scif", "renesas,scif";
reg = <0 0xe6e88000 0 64>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 310>;
- clock-names = "fck";
- power-domains = <&sysc 32>;
+ clocks = <&cpg CPG_MOD 310>,
+ <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 310>;
status = "disabled";
};
+ msiof0: spi@e6e90000 {
+ compatible = "renesas,msiof-r8a77990",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6e90000 0 0x0064>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 211>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 211>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6ea0000 {
+ compatible = "renesas,msiof-r8a77990",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6ea0000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 210>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 210>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6c00000 {
+ compatible = "renesas,msiof-r8a77990",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c00000 0 0x0064>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 209>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 209>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c10000 {
+ compatible = "renesas,msiof-r8a77990",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c10000 0 0x0064>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 208>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 208>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ vin4: video@e6ef4000 {
+ compatible = "renesas,vin-r8a77990";
+ reg = <0 0xe6ef4000 0 0x1000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 807>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 807>;
+ renesas,id = <4>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ vin4csi40: endpoint {
+ remote-endpoint= <&csi40vin4>;
+ };
+ };
+ };
+ };
+
+ vin5: video@e6ef5000 {
+ compatible = "renesas,vin-r8a77990";
+ reg = <0 0xe6ef5000 0 0x1000>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 806>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 806>;
+ renesas,id = <5>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ vin5csi40: endpoint {
+ remote-endpoint= <&csi40vin5>;
+ };
+ };
+ };
+ };
+
xhci0: usb@ee000000 {
compatible = "renesas,xhci-r8a77990",
"renesas,rcar-gen3-xhci";
@@ -364,11 +793,11 @@
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
- power-domains = <&sysc 32>;
- resets = <&cpg 703>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
@@ -376,12 +805,12 @@
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
companion = <&ohci0>;
- power-domains = <&sysc 32>;
- resets = <&cpg 703>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
@@ -390,9 +819,9 @@
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
- power-domains = <&sysc 32>;
- resets = <&cpg 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>;
status = "disabled";
};
@@ -410,10 +839,208 @@
(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 408>;
};
+ vspb0: vsp@fe960000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe960000 0 0x8000>;
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 626>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 626>;
+ renesas,fcp = <&fcpvb0>;
+ };
+
+ fcpvb0: fcp@fe96f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe96f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 607>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 607>;
+ iommus = <&ipmmu_vp0 5>;
+ };
+
+ vspi0: vsp@fe9a0000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe9a0000 0 0x8000>;
+ interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 631>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 631>;
+ renesas,fcp = <&fcpvi0>;
+ };
+
+ fcpvi0: fcp@fe9af000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9af000 0 0x200>;
+ clocks = <&cpg CPG_MOD 611>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 611>;
+ iommus = <&ipmmu_vp0 8>;
+ };
+
+ vspd0: vsp@fea20000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea20000 0 0x7000>;
+ interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 623>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 623>;
+ renesas,fcp = <&fcpvd0>;
+ };
+
+ fcpvd0: fcp@fea27000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea27000 0 0x200>;
+ clocks = <&cpg CPG_MOD 603>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 603>;
+ iommus = <&ipmmu_vi0 8>;
+ };
+
+ vspd1: vsp@fea28000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea28000 0 0x7000>;
+ interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 622>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 622>;
+ renesas,fcp = <&fcpvd1>;
+ };
+
+ fcpvd1: fcp@fea2f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea2f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 602>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 602>;
+ iommus = <&ipmmu_vi0 9>;
+ };
+
+ csi40: csi2@feaa0000 {
+ compatible = "renesas,r8a77990-csi2", "renesas,rcar-gen3-csi2";
+ reg = <0 0xfeaa0000 0 0x10000>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ csi40vin4: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vin4csi40>;
+ };
+ csi40vin5: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vin5csi40>;
+ };
+ };
+ };
+ };
+
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a77990";
+ reg = <0 0xfeb00000 0 0x80000>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>;
+ clock-names = "du.0", "du.1";
+ vsps = <&vspd0 0 &vspd1 0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ du_out_lvds1: endpoint {
+ remote-endpoint = <&lvds1_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds-encoder@feb90000 {
+ compatible = "renesas,r8a77990-lvds";
+ reg = <0 0xfeb90000 0 0x20>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ lvds1: lvds-encoder@feb90100 {
+ compatible = "renesas,r8a77990-lvds";
+ reg = <0 0xfeb90100 0 0x20>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 726>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds1_in: endpoint {
+ remote-endpoint = <&du_out_lvds1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds1_out: endpoint {
+ };
+ };
+ };
+ };
+
prr: chipid@fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index a8e8f2669d4c..2405eaad0296 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -2,7 +2,7 @@
/*
* Device Tree Source for the Draak board
*
- * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016-2018 Renesas Electronics Corp.
* Copyright (C) 2017 Glider bvba
*/
@@ -24,55 +24,58 @@
stdout-path = "serial0:115200n8";
};
- vga {
- compatible = "vga-connector";
+ composite-in {
+ compatible = "composite-video-connector";
port {
- vga_in: endpoint {
- remote-endpoint = <&adv7123_out>;
+ composite_con_in: endpoint {
+ remote-endpoint = <&adv7180_in>;
};
};
};
- vga-encoder {
- compatible = "adi,adv7123";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ hdmi-in {
+ compatible = "hdmi-connector";
+ type = "a";
- port@0 {
- reg = <0>;
- adv7123_in: endpoint {
- remote-endpoint = <&du_out_rgb>;
- };
- };
- port@1 {
- reg = <1>;
- adv7123_out: endpoint {
- remote-endpoint = <&vga_in>;
- };
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&adv7612_in>;
};
};
};
- composite-in {
- compatible = "composite-video-connector";
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
port {
- composite_con_in: endpoint {
- remote-endpoint = <&adv7180_in>;
+ hdmi_con_out: endpoint {
+ remote-endpoint = <&adv7511_out>;
};
};
};
- hdmi-in {
- compatible = "hdmi-connector";
- type = "a";
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&reg_3p3v>;
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&adv7612_in>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
};
};
};
@@ -101,76 +104,86 @@
regulator-always-on;
};
- x12_clk: x12 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <74250000>;
- };
-};
-
-&extal_clk {
- clock-frequency = <48000000>;
-};
+ vga {
+ compatible = "vga-connector";
-&pfc {
- avb0_pins: avb {
- mux {
- groups = "avb0_link", "avb0_mdio", "avb0_mii";
- function = "avb0";
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
};
};
- du_pins: du {
- groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
- function = "du";
- };
+ vga-encoder {
+ compatible = "adi,adv7123";
- i2c0_pins: i2c0 {
- groups = "i2c0";
- function = "i2c0";
- };
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- i2c1_pins: i2c1 {
- groups = "i2c1";
- function = "i2c1";
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
};
- pwm0_pins: pwm0 {
- groups = "pwm0_c";
- function = "pwm0";
+ x12_clk: x12 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
};
+};
- pwm1_pins: pwm1 {
- groups = "pwm1_c";
- function = "pwm1";
- };
+&avb {
+ pinctrl-0 = <&avb0_pins>;
+ pinctrl-names = "default";
+ renesas,no-ether-link;
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-txid";
+ status = "okay";
- scif2_pins: scif2 {
- groups = "scif2_data";
- function = "scif2";
+ phy0: ethernet-phy@0 {
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
};
+};
- sdhi2_pins: sd2 {
- groups = "mmc_data8", "mmc_ctrl";
- function = "mmc";
- power-source = <1800>;
- };
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
- sdhi2_pins_uhs: sd2_uhs {
- groups = "mmc_data8", "mmc_ctrl";
- function = "mmc";
- power-source = <1800>;
- };
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&x12_clk>;
+ clock-names = "du.0", "du.1", "dclkin.0";
- usb0_pins: usb0 {
- groups = "usb0";
- function = "usb0";
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
};
+};
- vin4_pins_cvbs: vin4 {
- groups = "vin4_data8", "vin4_sync", "vin4_clk";
- function = "vin4";
- };
+&ehci0 {
+ status = "okay";
+};
+
+&extal_clk {
+ clock-frequency = <48000000>;
};
&i2c0 {
@@ -178,12 +191,6 @@
pinctrl-names = "default";
status = "okay";
- eeprom@50 {
- compatible = "rohm,br24t01", "atmel,24c01";
- reg = <0x50>;
- pagesize = <8>;
- };
-
composite-in@20 {
compatible = "adi,adv7180cp";
reg = <0x20>;
@@ -218,6 +225,43 @@
};
+ hdmi-encoder@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>, <0x3f>, <0x38>, <0x3c>;
+ reg-names = "main", "edid", "packet", "cec";
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+
+ /* Depends on LVDS */
+ max-clock = <135000000>;
+ min-vrefresh = <50>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+
hdmi-decoder@4c {
compatible = "adi,adv7612";
reg = <0x4c>;
@@ -254,6 +298,12 @@
};
};
};
+
+ eeprom@50 {
+ compatible = "rohm,br24t01", "atmel,24c01";
+ reg = <0x50>;
+ pagesize = <8>;
+ };
};
&i2c1 {
@@ -262,47 +312,112 @@
status = "okay";
};
-&du {
- pinctrl-0 = <&du_pins>;
- pinctrl-names = "default";
+&lvds0 {
status = "okay";
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>,
- <&x12_clk>;
- clock-names = "du.0", "du.1", "dclkin.0";
+ clocks = <&cpg CPG_MOD 727>,
+ <&x12_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
ports {
- port@0 {
- endpoint {
- remote-endpoint = <&adv7123_in>;
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
};
};
};
};
-&ehci0 {
- status = "okay";
+&lvds1 {
+ clocks = <&cpg CPG_MOD 727>,
+ <&x12_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
};
&ohci0 {
status = "okay";
};
-&avb {
- pinctrl-0 = <&avb0_pins>;
+&pfc {
+ avb0_pins: avb {
+ mux {
+ groups = "avb0_link", "avb0_mdio", "avb0_mii";
+ function = "avb0";
+ };
+ };
+
+ du_pins: du {
+ groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+ function = "du";
+ };
+
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
+ i2c1_pins: i2c1 {
+ groups = "i2c1";
+ function = "i2c1";
+ };
+
+ pwm0_pins: pwm0 {
+ groups = "pwm0_c";
+ function = "pwm0";
+ };
+
+ pwm1_pins: pwm1 {
+ groups = "pwm1_c";
+ function = "pwm1";
+ };
+
+ scif2_pins: scif2 {
+ groups = "scif2_data";
+ function = "scif2";
+ };
+
+ sdhi2_pins: sd2 {
+ groups = "mmc_data8", "mmc_ctrl";
+ function = "mmc";
+ power-source = <1800>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "mmc_data8", "mmc_ctrl";
+ function = "mmc";
+ power-source = <1800>;
+ };
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ vin4_pins_cvbs: vin4 {
+ groups = "vin4_data8", "vin4_sync", "vin4_clk";
+ function = "vin4";
+ };
+};
+
+&pwm0 {
+ pinctrl-0 = <&pwm0_pins>;
pinctrl-names = "default";
- renesas,no-ether-link;
- phy-handle = <&phy0>;
- phy-mode = "rgmii-txid";
+
status = "okay";
+};
- phy0: ethernet-phy@0 {
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio5>;
- interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
- };
+&pwm1 {
+ pinctrl-0 = <&pwm1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
};
&scif2 {
@@ -333,25 +448,6 @@
status = "okay";
};
-&pwm0 {
- pinctrl-0 = <&pwm0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&pwm1 {
- pinctrl-0 = <&pwm1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&rwdt {
- timeout-sec = <60>;
- status = "okay";
-};
-
&vin4 {
pinctrl-0 = <&vin4_pins_cvbs>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index fe77bc43c447..214f4954b321 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a77995 SoC
+ * Device Tree Source for the R-Car D3 (R8A77995) SoC
*
* Copyright (C) 2016 Renesas Electronics Corp.
* Copyright (C) 2017 Glider bvba
@@ -391,6 +391,10 @@
resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <8>;
+ iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+ <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+ <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+ <&ipmmu_ds0 6>, <&ipmmu_ds0 7>;
};
dmac1: dma-controller@e7300000 {
@@ -415,6 +419,10 @@
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <8>;
+ iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+ <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+ <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+ <&ipmmu_ds1 6>, <&ipmmu_ds1 7>;
};
dmac2: dma-controller@e7310000 {
@@ -439,6 +447,10 @@
resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <8>;
+ iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+ <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+ <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+ <&ipmmu_ds1 22>, <&ipmmu_ds1 23>;
};
ipmmu_ds0: mmu@e6740000 {
@@ -817,11 +829,11 @@
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
@@ -829,12 +841,12 @@
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
@@ -843,9 +855,9 @@
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>;
status = "disabled";
};
@@ -960,12 +972,68 @@
port@1 {
reg = <1>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
};
};
port@2 {
reg = <2>;
du_out_lvds1: endpoint {
+ remote-endpoint = <&lvds1_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds-encoder@feb90000 {
+ compatible = "renesas,r8a77995-lvds";
+ reg = <0 0xfeb90000 0 0x20>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ lvds1: lvds-encoder@feb90100 {
+ compatible = "renesas,r8a77995-lvds";
+ reg = <0 0xfeb90100 0 0x20>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 726>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds1_in: endpoint {
+ remote-endpoint = <&du_out_lvds1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds1_out: endpoint {
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 7d3d866a0063..7f91ff524109 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -420,7 +420,10 @@
video-receiver@70 {
compatible = "adi,adv7482";
- reg = <0x70>;
+ reg = <0x70 0x71 0x72 0x73 0x74 0x75
+ 0x60 0x61 0x62 0x63 0x64 0x65>;
+ reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+ "infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
#address-cells = <1>;
#size-cells = <0>;
@@ -471,6 +474,8 @@
&i2c_dvfs {
status = "okay";
+ clock-frequency = <400000>;
+
pmic: pmic@30 {
pinctrl-0 = <&irq0_pins>;
pinctrl-names = "default";
@@ -748,6 +753,7 @@
wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
@@ -777,6 +783,7 @@
wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 8bf3091a899c..1b316d79df88 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -127,7 +127,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x71>;
- reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
};
};
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 0ead552d7eae..89daca7356df 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -18,6 +18,7 @@
};
chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
@@ -241,6 +242,8 @@
&i2c_dvfs {
status = "okay";
+ clock-frequency = <400000>;
+
pmic: pmic@30 {
pinctrl-0 = <&irq0_pins>;
pinctrl-names = "default";
@@ -416,6 +419,7 @@
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
bus-width = <4>;
sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index b0092d95b574..49042c477870 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
@@ -14,5 +15,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
new file mode 100644
index 000000000000..263d7f3dbc44
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "px30.dtsi"
+
+/ {
+ model = "Rockchip PX30 EVB";
+ compatible = "rockchip,px30-evb", "rockchip,px30";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 2>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ esc-key {
+ label = "esc";
+ linux,code = <KEY_ESC>;
+ press-threshold-microvolt = <1310000>;
+ };
+
+ home-key {
+ label = "home";
+ linux,code = <KEY_HOME>;
+ press-threshold-microvolt = <624000>;
+ };
+
+ menu-key {
+ label = "menu";
+ linux,code = <KEY_MENU>;
+ press-threshold-microvolt = <987000>;
+ };
+
+ vol-down-key {
+ label = "volume down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ press-threshold-microvolt = <300000>;
+ };
+
+ vol-up-key {
+ label = "volume up";
+ linux,code = <KEY_VOLUMEUP>;
+ press-threshold-microvolt = <17000>;
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 25000 0>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
+ };
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_phy";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc5v0_sys: vccsys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&display_subsystem {
+ status = "okay";
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&gmac {
+ clock_in_out = "output";
+ phy-supply = <&vcc_phy>;
+ snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 50000 50000>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2s1_2ch {
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+};
+
+&pinctrl {
+ headphone {
+ hp_det: hp-det {
+ rockchip,pins =
+ <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic_int {
+ rockchip,pins =
+ <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ soc_slppin_gpio: soc_slppin_gpio {
+ rockchip,pins =
+ <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+
+ soc_slppin_slp: soc_slppin_slp {
+ rockchip,pins =
+ <0 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ soc_slppin_rst: soc_slppin_rst {
+ rockchip,pins =
+ <0 RK_PA4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins =
+ <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&saradc {
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <800>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdio {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ keep-power-in-suspend;
+ non-removable;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer &uart1_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb20_otg {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
new file mode 100644
index 000000000000..9aa8d5ef9e45
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -0,0 +1,2047 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/clock/px30-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/px30-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+
+/ {
+ compatible = "rockchip,px30";
+
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &gmac;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLK>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ dynamic-power-coefficient = <90>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLK>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ dynamic-power-coefficient = <90>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35", "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLK>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ dynamic-power-coefficient = <90>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35", "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLK>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ dynamic-power-coefficient = <90>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP: cpu-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <120>;
+ exit-latency-us = <250>;
+ min-residency-us = <900>;
+ };
+
+ CLUSTER_SLEEP: cluster-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <400>;
+ exit-latency-us = <500>;
+ min-residency-us = <2000>;
+ };
+ };
+ };
+
+ cpu0_opp_table: cpu0-opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <950000 950000 1350000>;
+ clock-latency-ns = <40000>;
+ opp-suspend;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <950000 950000 1350000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1050000 1050000 1350000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1175000 1175000 1350000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1300000 1300000 1350000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1296000000 {
+ opp-hz = /bits/ 64 <1296000000>;
+ opp-microvolt = <1350000 1350000 1350000>;
+ clock-latency-ns = <40000>;
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ display_subsystem: display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vopb_out>, <&vopl_out>;
+ status = "disabled";
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
+
+ gmac_clkin: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ clock-output-names = "gmac_clkin";
+ #clock-cells = <0>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ xin24m: xin24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ };
+
+ xin32k: xin32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ };
+
+ pmu: power-management@ff000000 {
+ compatible = "rockchip,px30-pmu", "syscon", "simple-mfd";
+ reg = <0x0 0xff000000 0x0 0x1000>;
+
+ power: power-controller {
+ compatible = "rockchip,px30-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* These power domains are grouped by VD_LOGIC */
+ pd_usb@PX30_PD_USB {
+ reg = <PX30_PD_USB>;
+ clocks = <&cru HCLK_HOST>,
+ <&cru HCLK_OTG>,
+ <&cru SCLK_OTG_ADP>;
+ pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
+ };
+ pd_sdcard@PX30_PD_SDCARD {
+ reg = <PX30_PD_SDCARD>;
+ clocks = <&cru HCLK_SDMMC>,
+ <&cru SCLK_SDMMC>;
+ pm_qos = <&qos_sdmmc>;
+ };
+ pd_gmac@PX30_PD_GMAC {
+ reg = <PX30_PD_GMAC>;
+ clocks = <&cru ACLK_GMAC>,
+ <&cru PCLK_GMAC>,
+ <&cru SCLK_MAC_REF>,
+ <&cru SCLK_GMAC_RX_TX>;
+ pm_qos = <&qos_gmac>;
+ };
+ pd_mmc_nand@PX30_PD_MMC_NAND {
+ reg = <PX30_PD_MMC_NAND>;
+ clocks = <&cru HCLK_NANDC>,
+ <&cru HCLK_EMMC>,
+ <&cru HCLK_SDIO>,
+ <&cru HCLK_SFC>,
+ <&cru SCLK_EMMC>,
+ <&cru SCLK_NANDC>,
+ <&cru SCLK_SDIO>,
+ <&cru SCLK_SFC>;
+ pm_qos = <&qos_emmc>, <&qos_nand>,
+ <&qos_sdio>, <&qos_sfc>;
+ };
+ pd_vpu@PX30_PD_VPU {
+ reg = <PX30_PD_VPU>;
+ clocks = <&cru ACLK_VPU>,
+ <&cru HCLK_VPU>,
+ <&cru SCLK_CORE_VPU>;
+ pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
+ };
+ pd_vo@PX30_PD_VO {
+ reg = <PX30_PD_VO>;
+ clocks = <&cru ACLK_RGA>,
+ <&cru ACLK_VOPB>,
+ <&cru ACLK_VOPL>,
+ <&cru DCLK_VOPB>,
+ <&cru DCLK_VOPL>,
+ <&cru HCLK_RGA>,
+ <&cru HCLK_VOPB>,
+ <&cru HCLK_VOPL>,
+ <&cru PCLK_MIPI_DSI>,
+ <&cru SCLK_RGA_CORE>,
+ <&cru SCLK_VOPB_PWM>;
+ pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
+ <&qos_vop_m0>, <&qos_vop_m1>;
+ };
+ pd_vi@PX30_PD_VI {
+ reg = <PX30_PD_VI>;
+ clocks = <&cru ACLK_CIF>,
+ <&cru ACLK_ISP>,
+ <&cru HCLK_CIF>,
+ <&cru HCLK_ISP>,
+ <&cru SCLK_ISP>;
+ pm_qos = <&qos_isp_128>, <&qos_isp_rd>,
+ <&qos_isp_wr>, <&qos_isp_m1>,
+ <&qos_vip>;
+ };
+ pd_gpu@PX30_PD_GPU {
+ reg = <PX30_PD_GPU>;
+ clocks = <&cru SCLK_GPU>;
+ pm_qos = <&qos_gpu>;
+ };
+ };
+ };
+
+ pmugrf: syscon@ff010000 {
+ compatible = "rockchip,px30-pmugrf", "syscon", "simple-mfd";
+ reg = <0x0 0xff010000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pmu_io_domains: io-domains {
+ compatible = "rockchip,px30-pmu-io-voltage-domain";
+ status = "disabled";
+ };
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x200>;
+ mode-bootloader = <BOOT_BL_DOWNLOAD>;
+ mode-fastboot = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_BL_DOWNLOAD>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ };
+ };
+
+ uart0: serial@ff030000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff030000 0x0 0x100>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 0>, <&dmac 1>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "disabled";
+ };
+
+ i2s1_2ch: i2s@ff070000 {
+ compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff070000 0x0 0x1000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ dmas = <&dmac 18>, <&dmac 19>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1_2ch_sclk &i2s1_2ch_lrck
+ &i2s1_2ch_sdi &i2s1_2ch_sdo>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s2_2ch: i2s@ff080000 {
+ compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff080000 0x0 0x1000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ dmas = <&dmac 20>, <&dmac 21>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s2_2ch_sclk &i2s2_2ch_lrck
+ &i2s2_2ch_sdi &i2s2_2ch_sdo>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@ff131000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xff131000 0 0x1000>,
+ <0x0 0xff132000 0 0x2000>,
+ <0x0 0xff134000 0 0x2000>,
+ <0x0 0xff136000 0 0x2000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ grf: syscon@ff140000 {
+ compatible = "rockchip,px30-grf", "syscon", "simple-mfd";
+ reg = <0x0 0xff140000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ io_domains: io-domains {
+ compatible = "rockchip,px30-io-voltage-domain";
+ status = "disabled";
+ };
+ };
+
+ uart1: serial@ff158000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff158000 0x0 0x100>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 2>, <&dmac 3>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
+ status = "disabled";
+ };
+
+ uart2: serial@ff160000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff160000 0x0 0x100>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 4>, <&dmac 5>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "disabled";
+ };
+
+ uart3: serial@ff168000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff168000 0x0 0x100>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 6>, <&dmac 7>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3m1_xfer &uart3m1_cts &uart3m1_rts>;
+ status = "disabled";
+ };
+
+ uart4: serial@ff170000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff170000 0x0 0x100>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 8>, <&dmac 9>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>;
+ status = "disabled";
+ };
+
+ uart5: serial@ff178000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff178000 0x0 0x100>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 10>, <&dmac 11>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_xfer &uart5_cts &uart5_rts>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@ff180000 {
+ compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xff180000 0x0 0x1000>;
+ clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ff190000 {
+ compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xff190000 0x0 0x1000>;
+ clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ff1a0000 {
+ compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xff1a0000 0x0 0x1000>;
+ clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ff1b0000 {
+ compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xff1b0000 0x0 0x1000>;
+ clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi0: spi@ff1d0000 {
+ compatible = "rockchip,px30-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1d0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac 12>, <&dmac 13>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@ff1d8000 {
+ compatible = "rockchip,px30-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1d8000 0x0 0x1000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac 14>, <&dmac 15>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ wdt: watchdog@ff1e0000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x0 0xff1e0000 0x0 0x100>;
+ clocks = <&cru PCLK_WDT_NS>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@ff200000 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff200000 0x0 0x10>;
+ clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@ff200010 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff200010 0x0 0x10>;
+ clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@ff200020 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff200020 0x0 0x10>;
+ clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@ff200030 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff200030 0x0 0x10>;
+ clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@ff208000 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff208000 0x0 0x10>;
+ clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm4_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@ff208010 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff208010 0x0 0x10>;
+ clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm5_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@ff208020 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff208020 0x0 0x10>;
+ clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm6_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm7: pwm@ff208030 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff208030 0x0 0x10>;
+ clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm7_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ rktimer: timer@ff210000 {
+ compatible = "rockchip,px30-timer", "rockchip,rk3288-timer";
+ reg = <0x0 0xff210000 0x0 0x1000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>;
+ clock-names = "pclk", "timer";
+ };
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dmac: dmac@ff240000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff240000 0x0 0x4000>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+ };
+
+ saradc: saradc@ff288000 {
+ compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc";
+ reg = <0x0 0xff288000 0x0 0x100>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ #io-channel-cells = <1>;
+ clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+ clock-names = "saradc", "apb_pclk";
+ resets = <&cru SRST_SARADC_P>;
+ reset-names = "saradc-apb";
+ status = "disabled";
+ };
+
+ cru: clock-controller@ff2b0000 {
+ compatible = "rockchip,px30-cru";
+ reg = <0x0 0xff2b0000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ assigned-clocks = <&cru PLL_NPLL>;
+ assigned-clock-rates = <1188000000>;
+ };
+
+ pmucru: clock-controller@ff2bc000 {
+ compatible = "rockchip,px30-pmucru";
+ reg = <0x0 0xff2bc000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ assigned-clocks =
+ <&pmucru PLL_GPLL>, <&pmucru PCLK_PMU_PRE>,
+ <&pmucru SCLK_WIFI_PMU>, <&cru ARMCLK>,
+ <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+ <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+ <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
+ assigned-clock-rates =
+ <1200000000>, <100000000>,
+ <26000000>, <600000000>,
+ <200000000>, <200000000>,
+ <150000000>, <150000000>,
+ <100000000>, <200000000>;
+ };
+
+ usb20_otg: usb@ff300000 {
+ compatible = "rockchip,px30-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x0 0xff300000 0x0 0x40000>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG>;
+ clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <280>;
+ g-tx-fifo-size = <256 128 128 64 32 16>;
+ g-use-dma;
+ power-domains = <&power PX30_PD_USB>;
+ status = "disabled";
+ };
+
+ usb_host0_ehci: usb@ff340000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xff340000 0x0 0x10000>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST>;
+ clock-names = "usbhost";
+ power-domains = <&power PX30_PD_USB>;
+ status = "disabled";
+ };
+
+ usb_host0_ohci: usb@ff350000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xff350000 0x0 0x10000>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST>;
+ clock-names = "usbhost";
+ power-domains = <&power PX30_PD_USB>;
+ status = "disabled";
+ };
+
+ gmac: ethernet@ff360000 {
+ compatible = "rockchip,px30-gmac";
+ reg = <0x0 0xff360000 0x0 0x10000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&cru SCLK_GMAC>, <&cru SCLK_GMAC_RX_TX>,
+ <&cru SCLK_GMAC_RX_TX>, <&cru SCLK_MAC_REF>,
+ <&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>,
+ <&cru PCLK_GMAC>, <&cru SCLK_GMAC_RMII>;
+ clock-names = "stmmaceth", "mac_clk_rx",
+ "mac_clk_tx", "clk_mac_ref",
+ "clk_mac_refout", "aclk_mac",
+ "pclk_mac", "clk_mac_speed";
+ rockchip,grf = <&grf>;
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rmii_pins &mac_refclk_12ma>;
+ power-domains = <&power PX30_PD_GMAC>;
+ resets = <&cru SRST_GMAC_A>;
+ reset-names = "stmmaceth";
+ status = "disabled";
+ };
+
+ sdmmc: dwmmc@ff370000 {
+ compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff370000 0x0 0x4000>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
+ power-domains = <&power PX30_PD_SDCARD>;
+ status = "disabled";
+ };
+
+ sdio: dwmmc@ff380000 {
+ compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff380000 0x0 0x4000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>;
+ power-domains = <&power PX30_PD_MMC_NAND>;
+ status = "disabled";
+ };
+
+ emmc: dwmmc@ff390000 {
+ compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff390000 0x0 0x4000>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ power-domains = <&power PX30_PD_MMC_NAND>;
+ status = "disabled";
+ };
+
+ vopb: vop@ff460000 {
+ compatible = "rockchip,px30-vop-big";
+ reg = <0x0 0xff460000 0x0 0xefc>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOPB>, <&cru DCLK_VOPB>,
+ <&cru HCLK_VOPB>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_VOPB_A>, <&cru SRST_VOPB_H>, <&cru SRST_VOPB>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vopb_mmu>;
+ power-domains = <&power PX30_PD_VO>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ vopb_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ vopb_mmu: iommu@ff460f00 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff460f00 0x0 0x100>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vopb_mmu";
+ clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>;
+ clock-names = "aclk", "hclk";
+ power-domains = <&power PX30_PD_VO>;
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ vopl: vop@ff470000 {
+ compatible = "rockchip,px30-vop-lit";
+ reg = <0x0 0xff470000 0x0 0xefc>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOPL>, <&cru DCLK_VOPL>,
+ <&cru HCLK_VOPL>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_VOPL_A>, <&cru SRST_VOPL_H>, <&cru SRST_VOPL>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vopl_mmu>;
+ power-domains = <&power PX30_PD_VO>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ vopl_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ vopl_mmu: iommu@ff470f00 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff470f00 0x0 0x100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vopl_mmu";
+ clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>;
+ clock-names = "aclk", "hclk";
+ power-domains = <&power PX30_PD_VO>;
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ qos_gmac: qos@ff518000 {
+ compatible = "syscon";
+ reg = <0x0 0xff518000 0x0 0x20>;
+ };
+
+ qos_gpu: qos@ff520000 {
+ compatible = "syscon";
+ reg = <0x0 0xff520000 0x0 0x20>;
+ };
+
+ qos_sdmmc: qos@ff52c000 {
+ compatible = "syscon";
+ reg = <0x0 0xff52c000 0x0 0x20>;
+ };
+
+ qos_emmc: qos@ff538000 {
+ compatible = "syscon";
+ reg = <0x0 0xff538000 0x0 0x20>;
+ };
+
+ qos_nand: qos@ff538080 {
+ compatible = "syscon";
+ reg = <0x0 0xff538080 0x0 0x20>;
+ };
+
+ qos_sdio: qos@ff538100 {
+ compatible = "syscon";
+ reg = <0x0 0xff538100 0x0 0x20>;
+ };
+
+ qos_sfc: qos@ff538180 {
+ compatible = "syscon";
+ reg = <0x0 0xff538180 0x0 0x20>;
+ };
+
+ qos_usb_host: qos@ff540000 {
+ compatible = "syscon";
+ reg = <0x0 0xff540000 0x0 0x20>;
+ };
+
+ qos_usb_otg: qos@ff540080 {
+ compatible = "syscon";
+ reg = <0x0 0xff540080 0x0 0x20>;
+ };
+
+ qos_isp_128: qos@ff548000 {
+ compatible = "syscon";
+ reg = <0x0 0xff548000 0x0 0x20>;
+ };
+
+ qos_isp_rd: qos@ff548080 {
+ compatible = "syscon";
+ reg = <0x0 0xff548080 0x0 0x20>;
+ };
+
+ qos_isp_wr: qos@ff548100 {
+ compatible = "syscon";
+ reg = <0x0 0xff548100 0x0 0x20>;
+ };
+
+ qos_isp_m1: qos@ff548180 {
+ compatible = "syscon";
+ reg = <0x0 0xff548180 0x0 0x20>;
+ };
+
+ qos_vip: qos@ff548200 {
+ compatible = "syscon";
+ reg = <0x0 0xff548200 0x0 0x20>;
+ };
+
+ qos_rga_rd: qos@ff550000 {
+ compatible = "syscon";
+ reg = <0x0 0xff550000 0x0 0x20>;
+ };
+
+ qos_rga_wr: qos@ff550080 {
+ compatible = "syscon";
+ reg = <0x0 0xff550080 0x0 0x20>;
+ };
+
+ qos_vop_m0: qos@ff550100 {
+ compatible = "syscon";
+ reg = <0x0 0xff550100 0x0 0x20>;
+ };
+
+ qos_vop_m1: qos@ff550180 {
+ compatible = "syscon";
+ reg = <0x0 0xff550180 0x0 0x20>;
+ };
+
+ qos_vpu: qos@ff558000 {
+ compatible = "syscon";
+ reg = <0x0 0xff558000 0x0 0x20>;
+ };
+
+ qos_vpu_r128: qos@ff558080 {
+ compatible = "syscon";
+ reg = <0x0 0xff558080 0x0 0x20>;
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,px30-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmugrf>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio0: gpio0@ff040000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff040000 0x0 0x100>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmucru PCLK_GPIO0_PMU>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1@ff250000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff250000 0x0 0x100>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2@ff260000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff260000 0x0 0x100>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio3@ff270000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff270000 0x0 0x100>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ pcfg_pull_none_2ma: pcfg-pull-none-2ma {
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pcfg_pull_up_4ma: pcfg-pull-up-4ma {
+ bias-pull-up;
+ drive-strength = <4>;
+ };
+
+ pcfg_pull_none_4ma: pcfg-pull-none-4ma {
+ bias-disable;
+ drive-strength = <4>;
+ };
+
+ pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+ bias-pull-down;
+ drive-strength = <4>;
+ };
+
+ pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+ bias-disable;
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+ bias-disable;
+ drive-strength = <12>;
+ };
+
+ pcfg_pull_up_12ma: pcfg-pull-up-12ma {
+ bias-pull-up;
+ drive-strength = <12>;
+ };
+
+ pcfg_pull_none_smt: pcfg-pull-none-smt {
+ bias-disable;
+ input-schmitt-enable;
+ };
+
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ pcfg_output_low: pcfg-output-low {
+ output-low;
+ };
+
+ pcfg_input_high: pcfg-input-high {
+ bias-pull-up;
+ input-enable;
+ };
+
+ pcfg_input: pcfg-input {
+ input-enable;
+ };
+
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins =
+ <0 RK_PB0 1 &pcfg_pull_none_smt>,
+ <0 RK_PB1 1 &pcfg_pull_none_smt>;
+ };
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins =
+ <0 RK_PC2 1 &pcfg_pull_none_smt>,
+ <0 RK_PC3 1 &pcfg_pull_none_smt>;
+ };
+ };
+
+ i2c2 {
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins =
+ <2 RK_PB7 2 &pcfg_pull_none_smt>,
+ <2 RK_PC0 2 &pcfg_pull_none_smt>;
+ };
+ };
+
+ i2c3 {
+ i2c3_xfer: i2c3-xfer {
+ rockchip,pins =
+ <1 RK_PB4 4 &pcfg_pull_none_smt>,
+ <1 RK_PB5 4 &pcfg_pull_none_smt>;
+ };
+ };
+
+ tsadc {
+ tsadc_otp_gpio: tsadc-otp-gpio {
+ rockchip,pins =
+ <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ tsadc_otp_out: tsadc-otp-out {
+ rockchip,pins =
+ <0 RK_PA6 1 &pcfg_pull_none>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins =
+ <0 RK_PB2 1 &pcfg_pull_up>,
+ <0 RK_PB3 1 &pcfg_pull_up>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins =
+ <0 RK_PB4 1 &pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins =
+ <0 RK_PB5 1 &pcfg_pull_none>;
+ };
+
+ uart0_rts_gpio: uart0-rts-gpio {
+ rockchip,pins =
+ <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins =
+ <1 RK_PC1 1 &pcfg_pull_up>,
+ <1 RK_PC0 1 &pcfg_pull_up>;
+ };
+
+ uart1_cts: uart1-cts {
+ rockchip,pins =
+ <1 RK_PC2 1 &pcfg_pull_none>;
+ };
+
+ uart1_rts: uart1-rts {
+ rockchip,pins =
+ <1 RK_PC3 1 &pcfg_pull_none>;
+ };
+
+ uart1_rts_gpio: uart1-rts-gpio {
+ rockchip,pins =
+ <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ uart2-m0 {
+ uart2m0_xfer: uart2m0-xfer {
+ rockchip,pins =
+ <1 RK_PD2 2 &pcfg_pull_up>,
+ <1 RK_PD3 2 &pcfg_pull_up>;
+ };
+ };
+
+ uart2-m1 {
+ uart2m1_xfer: uart2m1-xfer {
+ rockchip,pins =
+ <2 RK_PB4 2 &pcfg_pull_up>,
+ <2 RK_PB6 2 &pcfg_pull_up>;
+ };
+ };
+
+ uart3-m0 {
+ uart3m0_xfer: uart3m0-xfer {
+ rockchip,pins =
+ <0 RK_PC0 2 &pcfg_pull_up>,
+ <0 RK_PC1 2 &pcfg_pull_up>;
+ };
+
+ uart3m0_cts: uart3m0-cts {
+ rockchip,pins =
+ <0 RK_PC2 2 &pcfg_pull_none>;
+ };
+
+ uart3m0_rts: uart3m0-rts {
+ rockchip,pins =
+ <0 RK_PC3 2 &pcfg_pull_none>;
+ };
+
+ uart3m0_rts_gpio: uart3m0-rts-gpio {
+ rockchip,pins =
+ <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ uart3-m1 {
+ uart3m1_xfer: uart3m1-xfer {
+ rockchip,pins =
+ <1 RK_PB6 2 &pcfg_pull_up>,
+ <1 RK_PB7 2 &pcfg_pull_up>;
+ };
+
+ uart3m1_cts: uart3m1-cts {
+ rockchip,pins =
+ <1 RK_PB4 2 &pcfg_pull_none>;
+ };
+
+ uart3m1_rts: uart3m1-rts {
+ rockchip,pins =
+ <1 RK_PB5 2 &pcfg_pull_none>;
+ };
+
+ uart3m1_rts_gpio: uart3m1-rts-gpio {
+ rockchip,pins =
+ <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ uart4 {
+ uart4_xfer: uart4-xfer {
+ rockchip,pins =
+ <1 RK_PD4 2 &pcfg_pull_up>,
+ <1 RK_PD5 2 &pcfg_pull_up>;
+ };
+
+ uart4_cts: uart4-cts {
+ rockchip,pins =
+ <1 RK_PD6 2 &pcfg_pull_none>;
+ };
+
+ uart4_rts: uart4-rts {
+ rockchip,pins =
+ <1 RK_PD7 2 &pcfg_pull_none>;
+ };
+ };
+
+ uart5 {
+ uart5_xfer: uart5-xfer {
+ rockchip,pins =
+ <3 RK_PA2 4 &pcfg_pull_up>,
+ <3 RK_PA1 4 &pcfg_pull_up>;
+ };
+
+ uart5_cts: uart5-cts {
+ rockchip,pins =
+ <3 RK_PA3 4 &pcfg_pull_none>;
+ };
+
+ uart5_rts: uart5-rts {
+ rockchip,pins =
+ <3 RK_PA5 4 &pcfg_pull_none>;
+ };
+ };
+
+ spi0 {
+ spi0_clk: spi0-clk {
+ rockchip,pins =
+ <1 RK_PB7 3 &pcfg_pull_up_4ma>;
+ };
+
+ spi0_csn: spi0-csn {
+ rockchip,pins =
+ <1 RK_PB6 3 &pcfg_pull_up_4ma>;
+ };
+
+ spi0_miso: spi0-miso {
+ rockchip,pins =
+ <1 RK_PB5 3 &pcfg_pull_up_4ma>;
+ };
+
+ spi0_mosi: spi0-mosi {
+ rockchip,pins =
+ <1 RK_PB4 3 &pcfg_pull_up_4ma>;
+ };
+
+ spi0_clk_hs: spi0-clk-hs {
+ rockchip,pins =
+ <1 RK_PB7 3 &pcfg_pull_up_8ma>;
+ };
+
+ spi0_miso_hs: spi0-miso-hs {
+ rockchip,pins =
+ <1 RK_PB5 3 &pcfg_pull_up_8ma>;
+ };
+
+ spi0_mosi_hs: spi0-mosi-hs {
+ rockchip,pins =
+ <1 RK_PB4 3 &pcfg_pull_up_8ma>;
+ };
+ };
+
+ spi1 {
+ spi1_clk: spi1-clk {
+ rockchip,pins =
+ <3 RK_PB7 4 &pcfg_pull_up_4ma>;
+ };
+
+ spi1_csn0: spi1-csn0 {
+ rockchip,pins =
+ <3 RK_PB1 4 &pcfg_pull_up_4ma>;
+ };
+
+ spi1_csn1: spi1-csn1 {
+ rockchip,pins =
+ <3 RK_PB2 2 &pcfg_pull_up_4ma>;
+ };
+
+ spi1_miso: spi1-miso {
+ rockchip,pins =
+ <3 RK_PB6 4 &pcfg_pull_up_4ma>;
+ };
+
+ spi1_mosi: spi1-mosi {
+ rockchip,pins =
+ <3 RK_PB4 4 &pcfg_pull_up_4ma>;
+ };
+
+ spi1_clk_hs: spi1-clk-hs {
+ rockchip,pins =
+ <3 RK_PB7 4 &pcfg_pull_up_8ma>;
+ };
+
+ spi1_miso_hs: spi1-miso-hs {
+ rockchip,pins =
+ <3 RK_PB6 4 &pcfg_pull_up_8ma>;
+ };
+
+ spi1_mosi_hs: spi1-mosi-hs {
+ rockchip,pins =
+ <3 RK_PB4 4 &pcfg_pull_up_8ma>;
+ };
+ };
+
+ pdm {
+ pdm_clk0m0: pdm-clk0m0 {
+ rockchip,pins =
+ <3 RK_PC6 2 &pcfg_pull_none>;
+ };
+
+ pdm_clk0m1: pdm-clk0m1 {
+ rockchip,pins =
+ <2 RK_PC6 1 &pcfg_pull_none>;
+ };
+
+ pdm_clk1: pdm-clk1 {
+ rockchip,pins =
+ <3 RK_PC7 2 &pcfg_pull_none>;
+ };
+
+ pdm_sdi0m0: pdm-sdi0m0 {
+ rockchip,pins =
+ <3 RK_PD3 2 &pcfg_pull_none>;
+ };
+
+ pdm_sdi0m1: pdm-sdi0m1 {
+ rockchip,pins =
+ <2 RK_PC5 2 &pcfg_pull_none>;
+ };
+
+ pdm_sdi1: pdm-sdi1 {
+ rockchip,pins =
+ <3 RK_PD0 2 &pcfg_pull_none>;
+ };
+
+ pdm_sdi2: pdm-sdi2 {
+ rockchip,pins =
+ <3 RK_PD1 2 &pcfg_pull_none>;
+ };
+
+ pdm_sdi3: pdm-sdi3 {
+ rockchip,pins =
+ <3 RK_PD2 2 &pcfg_pull_none>;
+ };
+
+ pdm_clk0m0_sleep: pdm-clk0m0-sleep {
+ rockchip,pins =
+ <3 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_clk0m_sleep1: pdm-clk0m1-sleep {
+ rockchip,pins =
+ <2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_clk1_sleep: pdm-clk1-sleep {
+ rockchip,pins =
+ <3 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_sdi0m0_sleep: pdm-sdi0m0-sleep {
+ rockchip,pins =
+ <3 RK_PD3 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_sdi0m1_sleep: pdm-sdi0m1-sleep {
+ rockchip,pins =
+ <2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_sdi1_sleep: pdm-sdi1-sleep {
+ rockchip,pins =
+ <3 RK_PD0 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_sdi2_sleep: pdm-sdi2-sleep {
+ rockchip,pins =
+ <3 RK_PD1 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_sdi3_sleep: pdm-sdi3-sleep {
+ rockchip,pins =
+ <3 RK_PD2 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+ };
+
+ i2s0 {
+ i2s0_8ch_mclk: i2s0-8ch-mclk {
+ rockchip,pins =
+ <3 RK_PC1 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sclktx: i2s0-8ch-sclktx {
+ rockchip,pins =
+ <3 RK_PC3 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sclkrx: i2s0-8ch-sclkrx {
+ rockchip,pins =
+ <3 RK_PB4 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_lrcktx: i2s0-8ch-lrcktx {
+ rockchip,pins =
+ <3 RK_PC2 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_lrckrx: i2s0-8ch-lrckrx {
+ rockchip,pins =
+ <3 RK_PB5 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdo0: i2s0-8ch-sdo0 {
+ rockchip,pins =
+ <3 RK_PC4 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdo1: i2s0-8ch-sdo1 {
+ rockchip,pins =
+ <3 RK_PC0 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdo2: i2s0-8ch-sdo2 {
+ rockchip,pins =
+ <3 RK_PB7 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdo3: i2s0-8ch-sdo3 {
+ rockchip,pins =
+ <3 RK_PB6 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdi0: i2s0-8ch-sdi0 {
+ rockchip,pins =
+ <3 RK_PC5 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdi1: i2s0-8ch-sdi1 {
+ rockchip,pins =
+ <3 RK_PB3 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdi2: i2s0-8ch-sdi2 {
+ rockchip,pins =
+ <3 RK_PB1 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdi3: i2s0-8ch-sdi3 {
+ rockchip,pins =
+ <3 RK_PB0 2 &pcfg_pull_none>;
+ };
+ };
+
+ i2s1 {
+ i2s1_2ch_mclk: i2s1-2ch-mclk {
+ rockchip,pins =
+ <2 RK_PC3 1 &pcfg_pull_none>;
+ };
+
+ i2s1_2ch_sclk: i2s1-2ch-sclk {
+ rockchip,pins =
+ <2 RK_PC2 1 &pcfg_pull_none>;
+ };
+
+ i2s1_2ch_lrck: i2s1-2ch-lrck {
+ rockchip,pins =
+ <2 RK_PC1 1 &pcfg_pull_none>;
+ };
+
+ i2s1_2ch_sdi: i2s1-2ch-sdi {
+ rockchip,pins =
+ <2 RK_PC5 1 &pcfg_pull_none>;
+ };
+
+ i2s1_2ch_sdo: i2s1-2ch-sdo {
+ rockchip,pins =
+ <2 RK_PC4 1 &pcfg_pull_none>;
+ };
+ };
+
+ i2s2 {
+ i2s2_2ch_mclk: i2s2-2ch-mclk {
+ rockchip,pins =
+ <3 RK_PA1 2 &pcfg_pull_none>;
+ };
+
+ i2s2_2ch_sclk: i2s2-2ch-sclk {
+ rockchip,pins =
+ <3 RK_PA2 2 &pcfg_pull_none>;
+ };
+
+ i2s2_2ch_lrck: i2s2-2ch-lrck {
+ rockchip,pins =
+ <3 RK_PA3 2 &pcfg_pull_none>;
+ };
+
+ i2s2_2ch_sdi: i2s2-2ch-sdi {
+ rockchip,pins =
+ <3 RK_PA5 2 &pcfg_pull_none>;
+ };
+
+ i2s2_2ch_sdo: i2s2-2ch-sdo {
+ rockchip,pins =
+ <3 RK_PA7 2 &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins =
+ <1 RK_PD6 1 &pcfg_pull_none_8ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins =
+ <1 RK_PD7 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_det: sdmmc-det {
+ rockchip,pins =
+ <0 RK_PA3 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins =
+ <1 RK_PD2 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins =
+ <1 RK_PD2 1 &pcfg_pull_up_8ma>,
+ <1 RK_PD3 1 &pcfg_pull_up_8ma>,
+ <1 RK_PD4 1 &pcfg_pull_up_8ma>,
+ <1 RK_PD5 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_gpio: sdmmc-gpio {
+ rockchip,pins =
+ <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+ };
+ };
+
+ sdio {
+ sdio_clk: sdio-clk {
+ rockchip,pins =
+ <1 RK_PC5 1 &pcfg_pull_none>;
+ };
+
+ sdio_cmd: sdio-cmd {
+ rockchip,pins =
+ <1 RK_PC4 1 &pcfg_pull_up>;
+ };
+
+ sdio_bus4: sdio-bus4 {
+ rockchip,pins =
+ <1 RK_PC6 1 &pcfg_pull_up>,
+ <1 RK_PC7 1 &pcfg_pull_up>,
+ <1 RK_PD0 1 &pcfg_pull_up>,
+ <1 RK_PD1 1 &pcfg_pull_up>;
+ };
+
+ sdio_gpio: sdio-gpio {
+ rockchip,pins =
+ <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ emmc {
+ emmc_clk: emmc-clk {
+ rockchip,pins =
+ <1 RK_PB1 2 &pcfg_pull_none_8ma>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins =
+ <1 RK_PB2 2 &pcfg_pull_up_8ma>;
+ };
+
+ emmc_pwren: emmc-pwren {
+ rockchip,pins =
+ <1 RK_PB0 2 &pcfg_pull_none>;
+ };
+
+ emmc_rstnout: emmc-rstnout {
+ rockchip,pins =
+ <1 RK_PB3 2 &pcfg_pull_none>;
+ };
+
+ emmc_bus1: emmc-bus1 {
+ rockchip,pins =
+ <1 RK_PA0 2 &pcfg_pull_up_8ma>;
+ };
+
+ emmc_bus4: emmc-bus4 {
+ rockchip,pins =
+ <1 RK_PA0 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA1 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA2 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA3 2 &pcfg_pull_up_8ma>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins =
+ <1 RK_PA0 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA1 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA2 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA3 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA4 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA5 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA6 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA7 2 &pcfg_pull_up_8ma>;
+ };
+ };
+
+ flash {
+ flash_cs0: flash-cs0 {
+ rockchip,pins =
+ <1 RK_PB0 1 &pcfg_pull_none>;
+ };
+
+ flash_rdy: flash-rdy {
+ rockchip,pins =
+ <1 RK_PB1 1 &pcfg_pull_none>;
+ };
+
+ flash_dqs: flash-dqs {
+ rockchip,pins =
+ <1 RK_PB2 1 &pcfg_pull_none>;
+ };
+
+ flash_ale: flash-ale {
+ rockchip,pins =
+ <1 RK_PB3 1 &pcfg_pull_none>;
+ };
+
+ flash_cle: flash-cle {
+ rockchip,pins =
+ <1 RK_PB4 1 &pcfg_pull_none>;
+ };
+
+ flash_wrn: flash-wrn {
+ rockchip,pins =
+ <1 RK_PB5 1 &pcfg_pull_none>;
+ };
+
+ flash_csl: flash-csl {
+ rockchip,pins =
+ <1 RK_PB6 1 &pcfg_pull_none>;
+ };
+
+ flash_rdn: flash-rdn {
+ rockchip,pins =
+ <1 RK_PB7 1 &pcfg_pull_none>;
+ };
+
+ flash_bus8: flash-bus8 {
+ rockchip,pins =
+ <1 RK_PA0 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA1 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA2 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA3 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA4 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA5 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA6 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA7 1 &pcfg_pull_up_12ma>;
+ };
+ };
+
+ lcdc {
+ lcdc_rgb_dclk_pin: lcdc-rgb-dclk-pin {
+ rockchip,pins =
+ <3 RK_PA0 1 &pcfg_pull_none_12ma>;
+ };
+
+ lcdc_rgb_m0_hsync_pin: lcdc-rgb-m0-hsync-pin {
+ rockchip,pins =
+ <3 RK_PA1 1 &pcfg_pull_none_12ma>;
+ };
+
+ lcdc_rgb_m0_vsync_pin: lcdc-rgb-m0-vsync-pin {
+ rockchip,pins =
+ <3 RK_PA2 1 &pcfg_pull_none_12ma>;
+ };
+
+ lcdc_rgb_m0_den_pin: lcdc-rgb-m0-den-pin {
+ rockchip,pins =
+ <3 RK_PA3 1 &pcfg_pull_none_12ma>;
+ };
+
+ lcdc_rgb888_m0_data_pins: lcdc-rgb888-m0-data-pins {
+ rockchip,pins =
+ <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+ <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+ <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+ <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+ <3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */
+ <3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */
+ <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+ <3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */
+ <3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */
+ <3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */
+ <3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */
+ <3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */
+ };
+
+ lcdc_rgb666_m0_data_pins: lcdc-rgb666-m0-data-pins {
+ rockchip,pins =
+ <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+ <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+ <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+ <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+ <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+ <3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */
+ };
+
+ lcdc_rgb565_m0_data_pins: lcdc-rgb565-m0-data-pins {
+ rockchip,pins =
+ <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+ <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+ <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+ <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */
+ };
+
+ lcdc_rgb888_m1_data_pins: lcdc-rgb888-m1-data-pins {
+ rockchip,pins =
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+ <3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */
+ <3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */
+ <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+ <3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */
+ <3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */
+ <3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */
+ <3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */
+ <3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */
+ };
+
+ lcdc_rgb666_m1_data_pins: lcdc-rgb666-m1-data-pins {
+ rockchip,pins =
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+ <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+ <3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */
+ };
+
+ lcdc_rgb565_m1_data_pins: lcdc-rgb565-m1-data-pins {
+ rockchip,pins =
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */
+ };
+ };
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins =
+ <0 RK_PB7 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins =
+ <0 RK_PC0 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins =
+ <2 RK_PB5 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_pin: pwm3-pin {
+ rockchip,pins =
+ <0 RK_PC1 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm4 {
+ pwm4_pin: pwm4-pin {
+ rockchip,pins =
+ <3 RK_PC2 3 &pcfg_pull_none>;
+ };
+ };
+
+ pwm5 {
+ pwm5_pin: pwm5-pin {
+ rockchip,pins =
+ <3 RK_PC3 3 &pcfg_pull_none>;
+ };
+ };
+
+ pwm6 {
+ pwm6_pin: pwm6-pin {
+ rockchip,pins =
+ <3 RK_PC4 3 &pcfg_pull_none>;
+ };
+ };
+
+ pwm7 {
+ pwm7_pin: pwm7-pin {
+ rockchip,pins =
+ <3 RK_PC5 3 &pcfg_pull_none>;
+ };
+ };
+
+ gmac {
+ rmii_pins: rmii-pins {
+ rockchip,pins =
+ <2 RK_PA0 2 &pcfg_pull_none_12ma>, /* mac_txen */
+ <2 RK_PA1 2 &pcfg_pull_none_12ma>, /* mac_txd1 */
+ <2 RK_PA2 2 &pcfg_pull_none_12ma>, /* mac_txd0 */
+ <2 RK_PA3 2 &pcfg_pull_none>, /* mac_rxd0 */
+ <2 RK_PA4 2 &pcfg_pull_none>, /* mac_rxd1 */
+ <2 RK_PA5 2 &pcfg_pull_none>, /* mac_rxer */
+ <2 RK_PA6 2 &pcfg_pull_none>, /* mac_rxdv */
+ <2 RK_PA7 2 &pcfg_pull_none>, /* mac_mdio */
+ <2 RK_PB1 2 &pcfg_pull_none>; /* mac_mdc */
+ };
+
+ mac_refclk_12ma: mac-refclk-12ma {
+ rockchip,pins =
+ <2 RK_PB2 2 &pcfg_pull_none_12ma>;
+ };
+
+ mac_refclk: mac-refclk {
+ rockchip,pins =
+ <2 RK_PB2 2 &pcfg_pull_none>;
+ };
+ };
+
+ cif-m0 {
+ cif_clkout_m0: cif-clkout-m0 {
+ rockchip,pins =
+ <2 RK_PB3 1 &pcfg_pull_none>;
+ };
+
+ dvp_d2d9_m0: dvp-d2d9-m0 {
+ rockchip,pins =
+ <2 RK_PA0 1 &pcfg_pull_none>, /* cif_data2 */
+ <2 RK_PA1 1 &pcfg_pull_none>, /* cif_data3 */
+ <2 RK_PA2 1 &pcfg_pull_none>, /* cif_data4 */
+ <2 RK_PA3 1 &pcfg_pull_none>, /* cif_data5 */
+ <2 RK_PA4 1 &pcfg_pull_none>, /* cif_data6 */
+ <2 RK_PA5 1 &pcfg_pull_none>, /* cif_data7 */
+ <2 RK_PA6 1 &pcfg_pull_none>, /* cif_data8 */
+ <2 RK_PA7 1 &pcfg_pull_none>, /* cif_data9 */
+ <2 RK_PB0 1 &pcfg_pull_none>, /* cif_sync */
+ <2 RK_PB1 1 &pcfg_pull_none>, /* cif_href */
+ <2 RK_PB2 1 &pcfg_pull_none>, /* cif_clkin */
+ <2 RK_PB3 1 &pcfg_pull_none>; /* cif_clkout */
+ };
+
+ dvp_d0d1_m0: dvp-d0d1-m0 {
+ rockchip,pins =
+ <2 RK_PB4 1 &pcfg_pull_none>, /* cif_data0 */
+ <2 RK_PB6 1 &pcfg_pull_none>; /* cif_data1 */
+ };
+
+ dvp_d10d11_m0:d10-d11-m0 {
+ rockchip,pins =
+ <2 RK_PB7 1 &pcfg_pull_none>, /* cif_data10 */
+ <2 RK_PC0 1 &pcfg_pull_none>; /* cif_data11 */
+ };
+ };
+
+ cif-m1 {
+ cif_clkout_m1: cif-clkout-m1 {
+ rockchip,pins =
+ <3 RK_PD0 3 &pcfg_pull_none>;
+ };
+
+ dvp_d2d9_m1: dvp-d2d9-m1 {
+ rockchip,pins =
+ <3 RK_PA3 3 &pcfg_pull_none>, /* cif_data2 */
+ <3 RK_PA5 3 &pcfg_pull_none>, /* cif_data3 */
+ <3 RK_PA7 3 &pcfg_pull_none>, /* cif_data4 */
+ <3 RK_PB0 3 &pcfg_pull_none>, /* cif_data5 */
+ <3 RK_PB1 3 &pcfg_pull_none>, /* cif_data6 */
+ <3 RK_PB4 3 &pcfg_pull_none>, /* cif_data7 */
+ <3 RK_PB6 3 &pcfg_pull_none>, /* cif_data8 */
+ <3 RK_PB7 3 &pcfg_pull_none>, /* cif_data9 */
+ <3 RK_PD1 3 &pcfg_pull_none>, /* cif_sync */
+ <3 RK_PD2 3 &pcfg_pull_none>, /* cif_href */
+ <3 RK_PD3 3 &pcfg_pull_none>, /* cif_clkin */
+ <3 RK_PD0 3 &pcfg_pull_none>; /* cif_clkout */
+ };
+
+ dvp_d0d1_m1: dvp-d0d1-m1 {
+ rockchip,pins =
+ <3 RK_PA1 3 &pcfg_pull_none>, /* cif_data0 */
+ <3 RK_PA2 3 &pcfg_pull_none>; /* cif_data1 */
+ };
+
+ dvp_d10d11_m1:d10-d11-m1 {
+ rockchip,pins =
+ <3 RK_PC6 3 &pcfg_pull_none>, /* cif_data10 */
+ <3 RK_PC7 3 &pcfg_pull_none>; /* cif_data11 */
+ };
+ };
+
+ isp {
+ isp_prelight: isp-prelight {
+ rockchip,pins =
+ <3 RK_PD1 4 &pcfg_pull_none>;
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index 246c317f6a68..99d0d9912950 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -41,6 +41,19 @@
vin-supply = <&vcc_io>;
};
+ vcc_sdio: sdmmcio-regulator {
+ compatible = "regulator-gpio";
+ gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ regulator-name = "vcc_sdio";
+ regulator-type = "voltage";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
compatible = "regulator-fixed";
enable-active-high;
@@ -208,6 +221,18 @@
};
};
+&io_domains {
+ status = "okay";
+
+ vccio1-supply = <&vcc_io>;
+ vccio2-supply = <&vcc18_emmc>;
+ vccio3-supply = <&vcc_sdio>;
+ vccio4-supply = <&vcc_18>;
+ vccio5-supply = <&vcc_io>;
+ vccio6-supply = <&vcc_io>;
+ pmuio-supply = <&vcc_io>;
+};
+
&pinctrl {
pmic {
pmic_int_l: pmic-int-l {
@@ -230,7 +255,12 @@
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vcc_sdio>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 5272e887a434..dc20145dd393 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -46,7 +46,7 @@
vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb20_host_drv>;
regulator-name = "vcc_host1_5v";
@@ -62,6 +62,23 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
+
+ sound {
+ compatible = "audio-graph-card";
+ label = "rockchip,rk3328";
+ dais = <&spdif_p0>;
+ };
+
+ spdif-dit {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+
+ port {
+ dit_p0_0: endpoint {
+ remote-endpoint = <&spdif_p0_0>;
+ };
+ };
+ };
};
&cpu0 {
@@ -108,6 +125,14 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmiphy {
+ status = "okay";
+};
+
&i2c1 {
status = "okay";
@@ -238,7 +263,7 @@
usb2 {
usb20_host_drv: usb20-host-drv {
- rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -261,6 +286,30 @@
status = "okay";
};
+&spdif {
+ pinctrl-0 = <&spdifm0_tx>;
+ status = "okay";
+ #sound-dai-cells = <0>;
+
+ spdif_p0: port {
+ spdif_p0_0: endpoint {
+ remote-endpoint = <&dit_p0_0>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ spiflash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+
+ /* maximum speed for Rockchip SPI */
+ spi-max-frequency = <50000000>;
+ };
+};
+
&tsadc {
rockchip,hw-tshut-mode = <0>;
rockchip,hw-tshut-polarity = <0>;
@@ -295,3 +344,11 @@
&usb_host0_ohci {
status = "okay";
};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 3f5a2944300f..e1a33dd981e0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -151,6 +151,11 @@
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
+ display_subsystem: display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop_out>;
+ };
+
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
@@ -249,6 +254,12 @@
status = "disabled";
};
+ grf_gpio: grf-gpio {
+ compatible = "rockchip,rk3328-grf-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power: power-controller {
compatible = "rockchip,rk3328-power-controller";
#power-domain-cells = <1>;
@@ -274,7 +285,6 @@
mode-bootloader = <BOOT_FASTBOOT>;
mode-loader = <BOOT_BL_DOWNLOAD>;
};
-
};
uart0: serial@ff110000 {
@@ -600,6 +610,28 @@
status = "disabled";
};
+ vop: vop@ff370000 {
+ compatible = "rockchip,rk3328-vop";
+ reg = <0x0 0xff370000 0x0 0x3efc>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP>, <&cru DCLK_LCDC>, <&cru HCLK_VOP>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vop_mmu>;
+ status = "disabled";
+
+ vop_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vop_out_hdmi: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hdmi_in_vop>;
+ };
+ };
+ };
+
vop_mmu: iommu@ff373f00 {
compatible = "rockchip,iommu";
reg = <0x0 0xff373f00 0x0 0x100>;
@@ -611,6 +643,46 @@
status = "disabled";
};
+ hdmi: hdmi@ff3c0000 {
+ compatible = "rockchip,rk3328-dw-hdmi";
+ reg = <0x0 0xff3c0000 0x0 0x20000>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI>,
+ <&cru SCLK_HDMI_SFC>;
+ clock-names = "iahb",
+ "isfr";
+ phys = <&hdmiphy>;
+ phy-names = "hdmi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ ports {
+ hdmi_in: port {
+ hdmi_in_vop: endpoint {
+ remote-endpoint = <&vop_out_hdmi>;
+ };
+ };
+ };
+ };
+
+ hdmiphy: phy@ff430000 {
+ compatible = "rockchip,rk3328-hdmi-phy";
+ reg = <0x0 0xff430000 0x0 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMIPHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
+ clock-names = "sysclk", "refoclk", "refpclk";
+ clock-output-names = "hdmi_phy";
+ #clock-cells = <0>;
+ nvmem-cells = <&efuse_cpu_version>;
+ nvmem-cell-names = "cpu-version";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
cru: clock-controller@ff440000 {
compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon";
reg = <0x0 0xff440000 0x0 0x1000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
index 8978d924eb83..cce266da28cd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
@@ -7,8 +7,7 @@
*/
/dts-v1/;
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
+#include "rk3399-rock960.dtsi"
/ {
model = "96boards RK3399 Ficus";
@@ -24,97 +23,6 @@
clock-output-names = "clkin_gmac";
#clock-cells = <0>;
};
-
- vcc1v8_s0: vcc1v8-s0 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8_s0";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vcc_sys: vcc-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- vin-supply = <&vcc_sys>;
- };
-
- vcc3v3_pcie: vcc3v3-pcie-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_drv>;
- regulator-boot-on;
- regulator-name = "vcc3v3_pcie";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc3v3_sys>;
- };
-
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&host_vbus_drv>;
- regulator-name = "vcc5v0_host";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&vcc_sys>;
- };
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 0>;
- regulator-name = "vdd_log";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- };
-
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
- status = "okay";
};
&gmac {
@@ -133,279 +41,8 @@
status = "okay";
};
-&hdmi {
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- status = "okay";
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- status = "okay";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio1>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc_sys>;
- vcc10-supply = <&vcc_sys>;
- vcc11-supply = <&vcc_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_1v8>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc1v8_dvp: LDO_REG1 {
- regulator-name = "vcc1v8_dvp";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca1v8_hdmi: LDO_REG2 {
- regulator-name = "vcca1v8_hdmi";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca_1v8: LDO_REG3 {
- regulator-name = "vcca_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sd: LDO_REG4 {
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc3v0_sd: LDO_REG5 {
- regulator-name = "vcc3v0_sd";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca0v9_hdmi: LDO_REG7 {
- regulator-name = "vcca0v9_hdmi";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <900000>;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c3 {
- status = "okay";
-};
-
-&i2c4 {
- status = "okay";
-};
-
-&io_domains {
- bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */
- audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */
- sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
- gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
- status = "okay";
-};
-
-&pcie_phy {
- status = "okay";
-};
-
&pcie0 {
ep-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqn_cpm>;
- vpcie3v3-supply = <&vcc3v3_pcie>;
- status = "okay";
-};
-
-&pmu_io_domains {
- pmu1830-supply = <&vcc_1v8>;
- status = "okay";
};
&pinctrl {
@@ -416,31 +53,6 @@
};
};
- sdmmc {
- sdmmc_bus1: sdmmc-bus1 {
- rockchip,pins =
- <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>;
- };
-
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins =
- <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins =
- <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins =
- <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>;
- };
- };
-
pcie {
pcie_drv: pcie-drv {
rockchip,pins =
@@ -448,23 +60,6 @@
};
};
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins =
- <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- vsel1_gpio: vsel1-gpio {
- rockchip,pins =
- <1 17 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel2_gpio: vsel2-gpio {
- rockchip,pins =
- <1 14 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
usb2 {
host_vbus_drv: host-vbus-drv {
rockchip,pins =
@@ -473,127 +68,18 @@
};
};
-&pwm2 {
- status = "okay";
-};
-
-&pwm3 {
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- non-removable;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- clock-frequency = <100000000>;
- clock-freq-min-max = <100000 100000000>;
- disable-wp;
- sd-uhs-sdr104;
- vqmmc-supply = <&vcc_sd>;
- card-detect-delay = <800>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- status = "okay";
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-};
-
-&u2phy1 {
- status = "okay";
-};
-
-&u2phy0_host {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
-};
-
-&u2phy1_host {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
-};
-
-&u2phy0_otg {
- status = "okay";
-};
-
-&u2phy1_otg {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
&usbdrd_dwc3_0 {
- status = "okay";
dr_mode = "host";
};
-&usbdrd3_1 {
- status = "okay";
-};
-
&usbdrd_dwc3_1 {
- status = "okay";
dr_mode = "host";
};
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
+&vcc3v3_pcie {
+ gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
};
-&vopl_mmu {
- status = "okay";
+&vcc5v0_host {
+ gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index 38336ab57cc4..c706db0ee9ec 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -622,6 +622,12 @@
};
};
+ wifi {
+ wifi_host_wake_l: wifi-host-wake-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
leds {
work_led_gpio: work_led-gpio {
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -646,6 +652,36 @@
status = "okay";
};
+&sdio0 {
+ /* WiFi & BT combo module Ampak AP6356S */
+ bus-width = <4>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+
+ /* Power supply */
+ vqmmc-supply = &vcc1v8_s3; /* IO line */
+ vmmc-supply = &vcc_sdio; /* card's power */
+
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ brcm,drive-strength = <5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index e0d64f862322..2dceeea29b83 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -131,7 +131,7 @@
status = "okay";
clock-frequency = <400000>;
- sgtl5000: codec@0a {
+ sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&sgtl5000_clk>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
new file mode 100644
index 000000000000..19f7732d728c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
@@ -0,0 +1,680 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Firefly ROC-RK3399-PC Board";
+ compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 25000 0>;
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ vcc_vbus_typec0: vcc-vbus-typec0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_vbus_typec0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ /*
+ * should be placed inside mp8859, but not until mp8859 has
+ * its own dt-binding.
+ */
+ vcc12v_sys: mp8859-dcdc1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&vcc_vbus_typec0>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc12v_sys>;
+ };
+
+ /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_vbus_typec1: vcc-vbus-typec1 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc_vbus_typec1_en>;
+ regulator-name = "vcc_vbus_typec1";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_sys>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+ vcc10-supply = <&vcc3v3_sys>;
+ vcc11-supply = <&vcc3v3_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc1v8_pmu>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG1 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_hdmi: LDO_REG2 {
+ regulator-name = "vcc1v8_hdmi";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG3 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca0v9_hdmi: LDO_REG7 {
+ regulator-name = "vcca0v9_hdmi";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel1_gpio>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel2_gpio>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb1: usb-typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb1_int>;
+ vbus-supply = <&vcc_vbus_typec1>;
+ status = "okay";
+ };
+};
+
+&i2c7 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb0: usb-typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc_vbus_typec0>;
+ status = "okay";
+ };
+};
+
+&i2s0 {
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ status = "okay";
+};
+
+&i2s1 {
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
+ status = "okay";
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&io_domains {
+ audio-supply = <&vcca1v8_codec>;
+ bt656-supply = <&vcc_3v0>;
+ gpio1830-supply = <&vcc_3v0>;
+ sdmmc-supply = <&vcc_sdio>;
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pinctrl {
+ lcd-panel {
+ lcd_panel_reset: lcd-panel-reset {
+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pmic {
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ hub_rst: hub-rst {
+ rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+
+ usb-typec {
+ vcc_vbus_typec1_en: vcc-vbus-typec1-en {
+ rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ fusb30x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ fusb1_int: fusb1-int {
+ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ phy-supply = <&vcc_vbus_typec0>;
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ phy-supply = <&vcc_vbus_typec1>;
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
new file mode 100644
index 000000000000..3c3308daec98
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-rock960.dtsi"
+
+/ {
+ model = "96boards Rock960";
+ compatible = "vamrs,rock960", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+};
+
+&pcie0 {
+ ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
+};
+
+&pinctrl {
+ pcie {
+ pcie_drv: pcie-drv {
+ rockchip,pins =
+ <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb2 {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins =
+ <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "otg";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+};
+
+&vcc3v3_pcie {
+ gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host {
+ gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
new file mode 100644
index 000000000000..6c8c4ab044aa
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
@@ -0,0 +1,542 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Linaro Ltd.
+ */
+
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ vcc1v8_s0: vcc1v8-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_drv>;
+ regulator-boot-on;
+ regulator-name = "vcc3v3_pcie";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ regulator-name = "vcc5v0_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 0>;
+ regulator-name = "vdd_log";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ status = "okay";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_hdmi: LDO_REG2 {
+ regulator-name = "vcca1v8_hdmi";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG3 {
+ regulator-name = "vcca_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sd: LDO_REG4 {
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc3v0_sd: LDO_REG5 {
+ regulator-name = "vcc3v0_sd";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca0v9_hdmi: LDO_REG7 {
+ regulator-name = "vcca0v9_hdmi";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&io_domains {
+ bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */
+ audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */
+ sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
+ gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ num-lanes = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreqn_cpm>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&pinctrl {
+ sdmmc {
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins =
+ <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins =
+ <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>,
+ <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>,
+ <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>,
+ <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins =
+ <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins =
+ <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins =
+ <1 17 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins =
+ <1 14 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ clock-frequency = <100000000>;
+ clock-freq-min-max = <100000 100000000>;
+ cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ sd-uhs-sdr104;
+ vqmmc-supply = <&vcc_sd>;
+ card-detect-delay = <800>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&u2phy1_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
new file mode 100644
index 000000000000..1d35f5406b5e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@@ -0,0 +1,692 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Pine64 RockPro64";
+ compatible = "pine64,rockpro64", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Key Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+
+ work-led {
+ label = "work";
+ default-state = "on";
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ };
+
+ diy-led {
+ label = "diy";
+ default-state = "off";
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pwr_en>;
+ regulator-name = "vcc3v3_pcie";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc5v0_typec: vcc5v0-typec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec_en>;
+ regulator-name = "vcc5v0_typec";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <&vcc_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc1v8_pmu>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc2v8_dvp: LDO_REG2 {
+ regulator-name = "vcc2v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG3 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <0>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb0: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc5v0_typec>;
+ status = "okay";
+ };
+};
+
+&i2s0 {
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ status = "okay";
+};
+
+&i2s1 {
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
+ status = "okay";
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ bt656-supply = <&vcc1v8_dvp>;
+ audio-supply = <&vcca1v8_codec>;
+ sdmmc-supply = <&vcc_sdio>;
+ gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pinctrl {
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ fusb302x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ work_led_gpio: work_led-gpio {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ diy_led_gpio: diy_led-gpio {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ lcd-panel {
+ lcd_panel_reset: lcd-panel-reset {
+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pcie {
+ pcie_pwr_en: pcie-pwr-en {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb-typec {
+ vcc5v0_typec_en: vcc5v0_typec_en {
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 36b60791c156..5421e23760c3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -93,6 +93,19 @@
vin-supply = <&vcc_1v8>;
};
+ vcc3v0_sd: vcc3v0-sd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_pwr_h>;
+ regulator-always-on;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-name = "vcc3v0_sd";
+ vin-supply = <&vcc3v3_sys>;
+ };
+
vcc3v3_sys: vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
@@ -103,20 +116,10 @@
vin-supply = <&vcc_sys>;
};
- vcc_sys: vcc-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_12v>;
- };
-
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
regulator-name = "vcc5v0_host";
@@ -124,6 +127,26 @@
vin-supply = <&vcc_sys>;
};
+ vcc5v0_typec0: vcc5v0-typec0-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec0_en>;
+ regulator-name = "vcc5v0_typec0";
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
vdd_log: vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm2 0 25000 1>;
@@ -208,7 +231,7 @@
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l &pmic_dvs2>;
+ pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
wakeup-source;
@@ -310,7 +333,7 @@
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
@@ -455,11 +478,6 @@
<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
- pmic_dvs2: pmic-dvs2 {
- rockchip,pins =
- <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
vsel1_gpio: vsel1-gpio {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
};
@@ -469,11 +487,22 @@
};
};
+ sd {
+ sdmmc0_pwr_h: sdmmc0-pwr-h {
+ rockchip,pins =
+ <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
usb2 {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins =
<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
+ vcc5v0_typec0_en: vcc5v0-typec0-en {
+ rockchip,pins =
+ <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
};
@@ -499,6 +528,7 @@
};
&sdmmc {
+ broken-cd;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
@@ -507,6 +537,7 @@
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc3v0_sd>;
vqmmc-supply = <&vcc_sdio>;
status = "okay";
};
@@ -531,6 +562,7 @@
status = "okay";
u2phy0_otg: otg-port {
+ phy-supply = <&vcc5v0_typec0>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index c88e603396f6..99e7f65c1779 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -74,6 +74,7 @@
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_l1: cpu@1 {
@@ -84,6 +85,7 @@
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_l2: cpu@2 {
@@ -94,6 +96,7 @@
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_l3: cpu@3 {
@@ -104,6 +107,7 @@
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_b0: cpu@100 {
@@ -114,6 +118,7 @@
clocks = <&cru ARMCLKB>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <436>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_b1: cpu@101 {
@@ -124,6 +129,29 @@
clocks = <&cru ARMCLKB>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <436>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP: cpu-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <120>;
+ exit-latency-us = <250>;
+ min-residency-us = <900>;
+ };
+
+ CLUSTER_SLEEP: cluster-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <400>;
+ exit-latency-us = <500>;
+ min-residency-us = <2000>;
+ };
};
};
@@ -1720,6 +1748,8 @@
resets = <&cru SRST_P_MIPI_DSI0>;
reset-names = "apb";
rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
ports {
@@ -1754,6 +1784,8 @@
resets = <&cru SRST_P_MIPI_DSI1>;
reset-names = "apb";
rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
ports {
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index d63b56e944de..31ba52b14e99 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -116,6 +116,28 @@
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
@@ -432,6 +454,8 @@
<&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
+ phy-names = "usb";
+ phys = <&usb_phy0>;
has-transaction-translator;
};
@@ -446,6 +470,8 @@
<&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
+ phy-names = "usb";
+ phys = <&usb_phy1>;
has-transaction-translator;
};
@@ -460,6 +486,8 @@
<&mio_clk 14>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
<&mio_rst 14>;
+ phy-names = "usb";
+ phys = <&usb_phy2>;
has-transaction-translator;
};
@@ -488,6 +516,27 @@
pinctrl: pinctrl {
compatible = "socionext,uniphier-ld11-pinctrl";
};
+
+ usb-phy {
+ compatible = "socionext,uniphier-ld11-usb2-phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_phy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <0>;
+ };
+ };
};
soc-glue@5f900000 {
@@ -571,7 +620,8 @@
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
index 1a5e7c24b901..d7ae28afef7d 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
@@ -148,3 +148,7 @@
&nand {
status = "okay";
};
+
+&usb {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
index 440c2e6a638b..406244a5c8e8 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
@@ -75,3 +75,7 @@
drive-strength = <9>;
};
};
+
+&usb {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index caf112629caa..d7e2d8969601 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -224,6 +224,50 @@
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi2: spi@54006200 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006200 0x100>;
+ interrupts = <0 229 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi3: spi@54006300 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006300 0x100>;
+ interrupts = <0 230 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi3>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
@@ -528,6 +572,20 @@
cdns,phy-dll-delay-sdclk-hsmmc = <21>;
};
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v3.1.1";
+ status = "disabled";
+ reg = <0x5a400000 0x800>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd>;
+ clocks = <&sd_clk 0>;
+ reset-names = "host";
+ resets = <&sd_rst 0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ };
+
soc_glue: soc-glue@5f800000 {
compatible = "socionext,uniphier-ld20-soc-glue",
"simple-mfd", "syscon";
@@ -553,6 +611,50 @@
efuse@200 {
compatible = "socionext,uniphier-efuse";
reg = <0x200 0x68>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* USB cells */
+ usb_rterm0: trim@54,4 {
+ reg = <0x54 1>;
+ bits = <4 2>;
+ };
+ usb_rterm1: trim@55,4 {
+ reg = <0x55 1>;
+ bits = <4 2>;
+ };
+ usb_rterm2: trim@58,4 {
+ reg = <0x58 1>;
+ bits = <4 2>;
+ };
+ usb_rterm3: trim@59,4 {
+ reg = <0x59 1>;
+ bits = <4 2>;
+ };
+ usb_sel_t0: trim@54,0 {
+ reg = <0x54 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t1: trim@55,0 {
+ reg = <0x55 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t2: trim@58,0 {
+ reg = <0x58 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t3: trim@59,0 {
+ reg = <0x59 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i0: trim@56,0 {
+ reg = <0x56 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i2: trim@5a,0 {
+ reg = <0x5a 1>;
+ bits = <0 4>;
+ };
};
};
@@ -620,6 +722,156 @@
};
};
+ usb: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host";
+ interrupts = <0 134 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>,
+ <&pinctrl_usb2>, <&pinctrl_usb3>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+ resets = <&usb_rst 15>;
+ phys = <&usb_hsphy0>, <&usb_hsphy1>,
+ <&usb_hsphy2>, <&usb_hsphy3>,
+ <&usb_ssphy0>, <&usb_ssphy1>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-ld20-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb_rst: reset@0 {
+ compatible = "socionext,uniphier-ld20-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_vbus2: regulator@120 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x120 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_vbus3: regulator@130 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x130 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb_vbus0>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+ <&usb_hs_i0>;
+ };
+
+ usb_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb_vbus1>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
+ <&usb_hs_i0>;
+ };
+
+ usb_hsphy2: hs-phy@220 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x220 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 17>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 17>;
+ vbus-supply = <&usb_vbus2>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
+ <&usb_hs_i2>;
+ };
+
+ usb_hsphy3: hs-phy@230 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x230 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 17>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 17>;
+ vbus-supply = <&usb_vbus3>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
+ <&usb_hs_i2>;
+ };
+
+ usb_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-ld20-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 18>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 18>;
+ vbus-supply = <&usb_vbus0>;
+ };
+
+ usb_ssphy1: ss-phy@310 {
+ compatible = "socionext,uniphier-ld20-usb3-ssphy";
+ reg = <0x310 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 19>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 19>;
+ vbus-supply = <&usb_vbus1>;
+ };
+ };
+
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled";
@@ -628,7 +880,8 @@
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
index c1bb607bd211..a41f7cac952a 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
@@ -75,6 +75,10 @@
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
&eth0 {
status = "okay";
phy-handle = <&ethphy0>;
@@ -100,3 +104,11 @@
&nand {
status = "okay";
};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index 2a4cf427f5d3..4f57c9e9d7a8 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -144,6 +144,28 @@
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
@@ -341,6 +363,24 @@
cdns,phy-dll-delay-sdclk-hsmmc = <21>;
};
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v3.1.1";
+ status = "disabled";
+ reg = <0x5a400000 0x800>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&sd_clk 0>;
+ reset-names = "host";
+ resets = <&sd_rst 0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
+
soc_glue: soc-glue@5f800000 {
compatible = "socionext,uniphier-pxs3-soc-glue",
"simple-mfd", "syscon";
@@ -366,6 +406,50 @@
efuse@200 {
compatible = "socionext,uniphier-efuse";
reg = <0x200 0x68>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* USB cells */
+ usb_rterm0: trim@54,4 {
+ reg = <0x54 1>;
+ bits = <4 2>;
+ };
+ usb_rterm1: trim@55,4 {
+ reg = <0x55 1>;
+ bits = <4 2>;
+ };
+ usb_rterm2: trim@58,4 {
+ reg = <0x58 1>;
+ bits = <4 2>;
+ };
+ usb_rterm3: trim@59,4 {
+ reg = <0x59 1>;
+ bits = <4 2>;
+ };
+ usb_sel_t0: trim@54,0 {
+ reg = <0x54 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t1: trim@55,0 {
+ reg = <0x55 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t2: trim@58,0 {
+ reg = <0x58 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t3: trim@59,0 {
+ reg = <0x59 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i0: trim@56,0 {
+ reg = <0x56 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i2: trim@5a,0 {
+ reg = <0x5a 1>;
+ bits = <0 4>;
+ };
};
};
@@ -447,6 +531,202 @@
};
};
+ usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 134 4>, <0 135 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb0_rst 15>;
+ phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+ <&usb0_ssphy0>, <&usb0_ssphy1>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-pxs3-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb0_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs3-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 12>;
+ reset-names = "link";
+ resets = <&sys_rst 12>;
+ };
+
+ usb0_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 12>;
+ reset-names = "link";
+ resets = <&sys_rst 12>;
+ };
+
+ usb0_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 12>;
+ reset-names = "link";
+ resets = <&sys_rst 12>;
+ };
+
+ usb0_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus0>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+ <&usb_hs_i0>;
+ };
+
+ usb0_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus1>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
+ <&usb_hs_i0>;
+ };
+
+ usb0_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 17>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 17>;
+ vbus-supply = <&usb0_vbus0>;
+ };
+
+ usb0_ssphy1: ss-phy@310 {
+ compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+ reg = <0x310 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 18>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 18>;
+ vbus-supply = <&usb0_vbus1>;
+ };
+ };
+
+ usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65c00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 137 4>, <0 138 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 13>, <&sys_clk 13>, <&sys_clk 13>;
+ resets = <&usb1_rst 15>;
+ phys = <&usb1_hsphy0>, <&usb1_hsphy1>,
+ <&usb1_ssphy0>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65d00000 {
+ compatible = "socionext,uniphier-pxs3-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65d00000 0x400>;
+
+ usb1_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs3-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 13>;
+ reset-names = "link";
+ resets = <&sys_rst 13>;
+ };
+
+ usb1_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 13>;
+ reset-names = "link";
+ resets = <&sys_rst 13>;
+ };
+
+ usb1_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 13>;
+ reset-names = "link";
+ resets = <&sys_rst 13>;
+ };
+
+ usb1_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy", "phy-ext";
+ clocks = <&sys_clk 13>, <&sys_clk 20>,
+ <&sys_clk 14>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 13>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus0>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
+ <&usb_hs_i2>;
+ };
+
+ usb1_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy", "phy-ext";
+ clocks = <&sys_clk 13>, <&sys_clk 20>,
+ <&sys_clk 14>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 13>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus1>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
+ <&usb_hs_i2>;
+ };
+
+ usb1_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy", "phy-ext";
+ clocks = <&sys_clk 13>, <&sys_clk 21>,
+ <&sys_clk 14>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 13>, <&sys_rst 21>;
+ vbus-supply = <&usb1_vbus0>;
+ };
+ };
+
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled";
@@ -455,7 +735,8 @@
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
diff --git a/arch/arm64/boot/dts/synaptics/as370.dtsi b/arch/arm64/boot/dts/synaptics/as370.dtsi
new file mode 100644
index 000000000000..7331acf3874e
--- /dev/null
+++ b/arch/arm64/boot/dts/synaptics/as370.dtsi
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2018 Synaptics Incorporated
+ *
+ * Author: Jisheng Zhang <jszhang@kernel.org>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "syna,as370";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x1>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x2>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x3>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ l2: cache {
+ compatible = "cache";
+ };
+
+ idle-states {
+ entry-method = "psci";
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <75>;
+ exit-latency-us = <155>;
+ min-residency-us = <1000>;
+ };
+ };
+ };
+
+ osc: osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>,
+ <&cpu1>,
+ <&cpu2>,
+ <&cpu3>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc@f7000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xf7000000 0x1000000>;
+
+ gic: interrupt-controller@901000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x901000 0x1000>,
+ <0x902000 0x2000>,
+ <0x904000 0x2000>,
+ <0x906000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ apb@e80000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xe80000 0x10000>;
+
+ uart0: serial@c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xc00 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@1800 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-port@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio1: gpio@2000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x2000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-port@1 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 2409344df4fa..adcd6341e40c 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -8,13 +8,13 @@
&cbass_main {
gic500: interrupt-controller@1800000 {
compatible = "arm,gic-v3";
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
ranges;
#interrupt-cells = <3>;
interrupt-controller;
- reg = <0x01800000 0x10000>, /* GICD */
- <0x01880000 0x90000>; /* GICR */
+ reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
+ <0x00 0x01880000 0x00 0x90000>; /* GICR */
/*
* vcpumntirq:
* virtual CPU interface maintenance interrupt
@@ -23,9 +23,50 @@
gic_its: gic-its@18200000 {
compatible = "arm,gic-v3-its";
- reg = <0x01820000 0x10000>;
+ reg = <0x00 0x01820000 0x00 0x10000>;
msi-controller;
#msi-cells = <1>;
};
};
+
+ secure_proxy_main: mailbox@32c00000 {
+ compatible = "ti,am654-secure-proxy";
+ #mbox-cells = <1>;
+ reg-names = "target_data", "rt", "scfg";
+ reg = <0x00 0x32c00000 0x00 0x100000>,
+ <0x00 0x32400000 0x00 0x100000>,
+ <0x00 0x32800000 0x00 0x100000>;
+ interrupt-names = "rx_011";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ main_uart0: serial@2800000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x02800000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ };
+
+ main_uart1: serial@2810000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x02810000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ };
+
+ main_uart2: serial@2820000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x02820000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
new file mode 100644
index 000000000000..8c611d16df44
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family MCU Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&cbass_mcu {
+ mcu_uart0: serial@40a00000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x40a00000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <96000000>;
+ current-speed = <115200>;
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
new file mode 100644
index 000000000000..affc3c309353
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&cbass_wakeup {
+ dmsc: dmsc {
+ compatible = "ti,k2g-sci";
+ ti,host-id = <12>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mbox-names = "rx", "tx";
+
+ mboxes= <&secure_proxy_main 11>,
+ <&secure_proxy_main 13>;
+
+ k3_pds: power-controller {
+ compatible = "ti,sci-pm-domain";
+ #power-domain-cells = <1>;
+ };
+
+ k3_clks: clocks {
+ compatible = "ti,k2g-sci-clk";
+ #clock-cells = <2>;
+ };
+
+ k3_reset: reset-controller {
+ compatible = "ti,sci-reset";
+ #reset-cells = <2>;
+ };
+ };
+
+ wkup_uart0: serial@42300000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x42300000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
index cede1fa0983c..3d4bf369d030 100644
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -16,6 +16,14 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ serial0 = &wkup_uart0;
+ serial1 = &mcu_uart0;
+ serial2 = &main_uart0;
+ serial3 = &main_uart1;
+ serial4 = &main_uart2;
+ };
+
chosen { };
firmware {
@@ -46,38 +54,38 @@
cbass_main: interconnect@100000 {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */
- <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */
- <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */
- <0x01000000 0x00 0x01000000 0x0af02400>, /* Most peripherals */
- <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+ <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+ <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
+ <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
+ <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
/* MCUSS Range */
- <0x28380000 0x00 0x28380000 0x03880000>,
- <0x40200000 0x00 0x40200000 0x00900100>,
- <0x42040000 0x00 0x42040000 0x03ac2400>,
- <0x45100000 0x00 0x45100000 0x00c24000>,
- <0x46000000 0x00 0x46000000 0x00200000>,
- <0x47000000 0x00 0x47000000 0x00068400>;
+ <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+ <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
+ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>;
cbass_mcu: interconnect@28380000 {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x28380000 0x28380000 0x03880000>, /* MCU NAVSS*/
- <0x40200000 0x40200000 0x00900100>, /* First peripheral window */
- <0x42040000 0x42040000 0x03ac2400>, /* WKUP */
- <0x45100000 0x45100000 0x00c24000>, /* MMRs, remaining NAVSS */
- <0x46000000 0x46000000 0x00200000>, /* CPSW */
- <0x47000000 0x47000000 0x00068400>; /* OSPI space 1 */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+ <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */
+ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
+ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */
cbass_wakeup: interconnect@42040000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
/* WKUP Basic peripherals */
- ranges = <0x42040000 0x42040000 0x03ac2400>;
+ ranges = <0x42040000 0x00 0x42040000 0x03ac2400>;
};
};
};
@@ -85,3 +93,5 @@
/* Now include the peripherals for each bus segments */
#include "k3-am65-main.dtsi"
+#include "k3-am65-mcu.dtsi"
+#include "k3-am65-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index af6956fdc13f..e146ac2ad781 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -34,3 +34,8 @@
};
};
};
+
+&wkup_uart0 {
+ /* Wakeup UART is used by System firmware */
+ status = "disabled";
+};