Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Device tree conversions for samsung and tegra

Both platforms had some initial device tree support, but this adds
much more to actually make it usable.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
  ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN
  ARM: EXYNOS: Add Exynos4 device tree enabled board file
  rtc: rtc-s3c: Add device tree support
  input: samsung-keypad: Add device tree support
  ARM: S5PV210: Modify platform data for pl330 driver
  ARM: S5PC100: Modify platform data for pl330 driver
  ARM: S5P64x0: Modify platform data for pl330 driver
  ARM: EXYNOS: Add a alias for pdma clocks
  ARM: EXYNOS: Limit usage of pl330 device instance to non-dt build
  ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers
  DMA: PL330: Add device tree support
  ARM: EXYNOS: Modify platform data for pl330 driver
  DMA: PL330: Infer transfer direction from transfer request instead of platform data
  DMA: PL330: move filter function into driver
  serial: samsung: Fix build for non-Exynos4210 devices
  serial: samsung: add device tree support
  serial: samsung: merge probe() function from all SoC specific extensions
  serial: samsung: merge all SoC specific port reset functions
  ARM: SAMSUNG: register uart clocks to clock lookup list
  serial: samsung: remove all uses of get_clksrc and set_clksrc
  ...

Fix up fairly trivial conflicts in arch/arm/mach-s3c2440/clock.c and
drivers/tty/serial/Kconfig both due to just adding code close to
changes.

50 files changed, 1999 insertions, 1107 deletions

diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
new file mode 100644
index 000000000000..b8c476384eef
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -0,0 +1,137 @@
+/*
+ * Samsung's Exynos4210 based Origen board device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Device tree source file for Insignal's Origen board which is based on
+ * Samsung's Exynos4210 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4210.dtsi"
+
+/ {
+	model = "Insignal Origen evaluation board based on Exynos4210";
+	compatible = "insignal,origen", "samsung,exynos4210";
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
+	};
+
+	sdhci@12530000 {
+		samsung,sdhci-bus-width = <4>;
+		linux,mmc_cap_4_bit_data;
+		samsung,sdhci-cd-internal;
+		gpio-cd = <&gpk2 2 2 3 3>;
+		gpios = <&gpk2 0 2 0 3>,
+			<&gpk2 1 2 0 3>,
+			<&gpk2 3 2 3 3>,
+			<&gpk2 4 2 3 3>,
+			<&gpk2 5 2 3 3>,
+			<&gpk2 6 2 3 3>;
+	};
+
+	sdhci@12510000 {
+		samsung,sdhci-bus-width = <4>;
+		linux,mmc_cap_4_bit_data;
+		samsung,sdhci-cd-internal;
+		gpio-cd = <&gpk0 2 2 3 3>;
+		gpios = <&gpk0 0 2 0 3>,
+			<&gpk0 1 2 0 3>,
+			<&gpk0 3 2 3 3>,
+			<&gpk0 4 2 3 3>,
+			<&gpk0 5 2 3 3>,
+			<&gpk0 6 2 3 3>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		up {
+			label = "Up";
+			gpios = <&gpx2 0 0 0 2>;
+			linux,code = <103>;
+		};
+
+		down {
+			label = "Down";
+			gpios = <&gpx2 1 0 0 2>;
+			linux,code = <108>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpx1 7 0 0 2>;
+			linux,code = <158>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpx1 6 0 0 2>;
+			linux,code = <102>;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpx1 5 0 0 2>;
+			linux,code = <139>;
+		};
+	};
+
+	keypad@100A0000 {
+		status = "disabled";
+	};
+
+	sdhci@12520000 {
+		status = "disabled";
+	};
+
+	sdhci@12540000 {
+		status = "disabled";
+	};
+
+	i2c@13860000 {
+		status = "disabled";
+	};
+
+	i2c@13870000 {
+		status = "disabled";
+	};
+
+	i2c@13880000 {
+		status = "disabled";
+	};
+
+	i2c@13890000 {
+		status = "disabled";
+	};
+
+	i2c@138A0000 {
+		status = "disabled";
+	};
+
+	i2c@138B0000 {
+		status = "disabled";
+	};
+
+	i2c@138C0000 {
+		status = "disabled";
+	};
+
+	i2c@138D0000 {
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
new file mode 100644
index 000000000000..27afc8e535ca
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -0,0 +1,182 @@
+/*
+ * Samsung's Exynos4210 based SMDKV310 board device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Device tree source file for Samsung's SMDKV310 board which is based on
+ * Samsung's Exynos4210 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4210.dtsi"
+
+/ {
+	model = "Samsung smdkv310 evaluation board based on Exynos4210";
+	compatible = "samsung,smdkv310", "samsung,exynos4210";
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
+	};
+
+	sdhci@12530000 {
+		samsung,sdhci-bus-width = <4>;
+		linux,mmc_cap_4_bit_data;
+		samsung,sdhci-cd-internal;
+		gpio-cd = <&gpk2 2 2 3 3>;
+		gpios = <&gpk2 0 2 0 3>,
+			<&gpk2 1 2 0 3>,
+			<&gpk2 3 2 3 3>,
+			<&gpk2 4 2 3 3>,
+			<&gpk2 5 2 3 3>,
+			<&gpk2 6 2 3 3>;
+	};
+
+	keypad@100A0000 {
+		samsung,keypad-num-rows = <2>;
+		samsung,keypad-num-columns = <8>;
+		linux,keypad-no-autorepeat;
+		linux,keypad-wakeup;
+
+		row-gpios = <&gpx2 0 3 3 0>,
+			    <&gpx2 1 3 3 0>;
+
+		col-gpios = <&gpx1 0 3 0 0>,
+			    <&gpx1 1 3 0 0>,
+			    <&gpx1 2 3 0 0>,
+			    <&gpx1 3 3 0 0>,
+			    <&gpx1 4 3 0 0>,
+			    <&gpx1 5 3 0 0>,
+			    <&gpx1 6 3 0 0>,
+			    <&gpx1 7 3 0 0>;
+
+		key_1 {
+			keypad,row = <0>;
+			keypad,column = <3>;
+			linux,code = <2>;
+		};
+
+		key_2 {
+			keypad,row = <0>;
+			keypad,column = <4>;
+			linux,code = <3>;
+		};
+
+		key_3 {
+			keypad,row = <0>;
+			keypad,column = <5>;
+			linux,code = <4>;
+		};
+
+		key_4 {
+			keypad,row = <0>;
+			keypad,column = <6>;
+			linux,code = <5>;
+		};
+
+		key_5 {
+			keypad,row = <0>;
+			keypad,column = <7>;
+			linux,code = <6>;
+		};
+
+		key_a {
+			keypad,row = <1>;
+			keypad,column = <3>;
+			linux,code = <30>;
+		};
+
+		key_b {
+			keypad,row = <1>;
+			keypad,column = <4>;
+			linux,code = <48>;
+		};
+
+		key_c {
+			keypad,row = <1>;
+			keypad,column = <5>;
+			linux,code = <46>;
+		};
+
+		key_d {
+			keypad,row = <1>;
+			keypad,column = <6>;
+			linux,code = <32>;
+		};
+
+		key_e {
+			keypad,row = <1>;
+			keypad,column = <7>;
+			linux,code = <18>;
+		};
+	};
+
+	i2c@13860000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		gpios = <&gpd1 0 2 3 0>,
+			<&gpd1 1 2 3 0>;
+
+		eeprom@50 {
+			compatible = "samsung,24ad0xd1";
+			reg = <0x50>;
+		};
+
+		eeprom@52 {
+			compatible = "samsung,24ad0xd1";
+			reg = <0x52>;
+		};
+	};
+
+	sdhci@12510000 {
+		status = "disabled";
+	};
+
+	sdhci@12520000 {
+		status = "disabled";
+	};
+
+	sdhci@12540000 {
+		status = "disabled";
+	};
+
+	i2c@13870000 {
+		status = "disabled";
+	};
+
+	i2c@13880000 {
+		status = "disabled";
+	};
+
+	i2c@13890000 {
+		status = "disabled";
+	};
+
+	i2c@138A0000 {
+		status = "disabled";
+	};
+
+	i2c@138B0000 {
+		status = "disabled";
+	};
+
+	i2c@138C0000 {
+		status = "disabled";
+	};
+
+	i2c@138D0000 {
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
new file mode 100644
index 000000000000..63d7578856c1
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -0,0 +1,397 @@
+/*
+ * Samsung's Exynos4210 SoC device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "samsung,exynos4210";
+	interrupt-parent = <&gic>;
+
+	gic:interrupt-controller@10490000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+	};
+
+	watchdog@10060000 {
+		compatible = "samsung,s3c2410-wdt";
+		reg = <0x10060000 0x100>;
+		interrupts = <0 43 0>;
+	};
+
+	rtc@10070000 {
+		compatible = "samsung,s3c6410-rtc";
+		reg = <0x10070000 0x100>;
+		interrupts = <0 44 0>, <0 45 0>;
+	};
+
+	keypad@100A0000 {
+		compatible = "samsung,s5pv210-keypad";
+		reg = <0x100A0000 0x100>;
+		interrupts = <0 109 0>;
+	};
+
+	sdhci@12510000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12510000 0x100>;
+		interrupts = <0 73 0>;
+	};
+
+	sdhci@12520000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12520000 0x100>;
+		interrupts = <0 74 0>;
+	};
+
+	sdhci@12530000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12530000 0x100>;
+		interrupts = <0 75 0>;
+	};
+
+	sdhci@12540000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12540000 0x100>;
+		interrupts = <0 76 0>;
+	};
+
+	serial@13800000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13800000 0x100>;
+		interrupts = <0 52 0>;
+	};
+
+	serial@13810000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13810000 0x100>;
+		interrupts = <0 53 0>;
+	};
+
+	serial@13820000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13820000 0x100>;
+		interrupts = <0 54 0>;
+	};
+
+	serial@13830000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13830000 0x100>;
+		interrupts = <0 55 0>;
+	};
+
+	i2c@13860000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13860000 0x100>;
+		interrupts = <0 58 0>;
+	};
+
+	i2c@13870000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13870000 0x100>;
+		interrupts = <0 59 0>;
+	};
+
+	i2c@13880000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13880000 0x100>;
+		interrupts = <0 60 0>;
+	};
+
+	i2c@13890000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13890000 0x100>;
+		interrupts = <0 61 0>;
+	};
+
+	i2c@138A0000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138A0000 0x100>;
+		interrupts = <0 62 0>;
+	};
+
+	i2c@138B0000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138B0000 0x100>;
+		interrupts = <0 63 0>;
+	};
+
+	i2c@138C0000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138C0000 0x100>;
+		interrupts = <0 64 0>;
+	};
+
+	i2c@138D0000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138D0000 0x100>;
+		interrupts = <0 65 0>;
+	};
+
+	amba {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,amba-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		pdma0: pdma@12680000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12680000 0x1000>;
+			interrupts = <0 35 0>;
+		};
+
+		pdma1: pdma@12690000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12690000 0x1000>;
+			interrupts = <0 36 0>;
+		};
+	};
+
+	gpio-controllers {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		gpio-controller;
+		ranges;
+
+		gpa0: gpio-controller@11400000 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11400000 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpa1: gpio-controller@11400020 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11400020 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpb: gpio-controller@11400040 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11400040 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpc0: gpio-controller@11400060 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11400060 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpc1: gpio-controller@11400080 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11400080 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpd0: gpio-controller@114000A0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x114000A0 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpd1: gpio-controller@114000C0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x114000C0 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpe0: gpio-controller@114000E0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x114000E0 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpe1: gpio-controller@11400100 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11400100 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpe2: gpio-controller@11400120 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11400120 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpe3: gpio-controller@11400140 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11400140 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpe4: gpio-controller@11400160 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11400160 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpf0: gpio-controller@11400180 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11400180 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpf1: gpio-controller@114001A0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x114001A0 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpf2: gpio-controller@114001C0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x114001C0 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpf3: gpio-controller@114001E0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x114001E0 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpj0: gpio-controller@11000000 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11000000 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpj1: gpio-controller@11000020 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11000020 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpk0: gpio-controller@11000040 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11000040 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpk1: gpio-controller@11000060 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11000060 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpk2: gpio-controller@11000080 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11000080 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpk3: gpio-controller@110000A0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x110000A0 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpl0: gpio-controller@110000C0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x110000C0 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpl1: gpio-controller@110000E0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x110000E0 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpl2: gpio-controller@11000100 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11000100 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpy0: gpio-controller@11000120 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11000120 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpy1: gpio-controller@11000140 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11000140 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpy2: gpio-controller@11000160 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11000160 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpy3: gpio-controller@11000180 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11000180 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpy4: gpio-controller@110001A0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x110001A0 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpy5: gpio-controller@110001C0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x110001C0 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpy6: gpio-controller@110001E0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x110001E0 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpx0: gpio-controller@11000C00 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11000C00 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpx1: gpio-controller@11000C20 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11000C20 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpx2: gpio-controller@11000C40 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11000C40 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpx3: gpio-controller@11000C60 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x11000C60 0x20>;
+			#gpio-cells = <4>;
+		};
+
+		gpz: gpio-controller@03860000 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x03860000 0x20>;
+			#gpio-cells = <4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index 0e225b86b652..80afa1b70b80 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -1,16 +1,11 @@
 /dts-v1/;
 
-/memreserve/ 0x1c000000 0x04000000;
 /include/ "tegra20.dtsi"
 
 / {
 	model = "NVIDIA Tegra2 Harmony evaluation board";
 	compatible = "nvidia,harmony", "nvidia,tegra20";
 
-	chosen {
-		bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootwait";
-	};
-
 	memory@0 {
 		reg = < 0x00000000 0x40000000 >;
 	};
@@ -52,16 +47,40 @@
 		ext-mic-en-gpios = <&gpio 185 0>;
 	};
 
+	serial@70006000 {
+		status = "disable";
+	};
+
+	serial@70006040 {
+		status = "disable";
+	};
+
+	serial@70006200 {
+		status = "disable";
+	};
+
 	serial@70006300 {
 		clock-frequency = < 216000000 >;
 	};
 
+	serial@70006400 {
+		status = "disable";
+	};
+
+	sdhci@c8000000 {
+		status = "disable";
+	};
+
 	sdhci@c8000200 {
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
 		power-gpios = <&gpio 155 0>; /* gpio PT3 */
 	};
 
+	sdhci@c8000400 {
+		status = "disable";
+	};
+
 	sdhci@c8000600 {
 		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
 		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts
new file mode 100644
index 000000000000..1a1d7023b69b
--- /dev/null
+++ b/arch/arm/boot/dts/tegra-paz00.dts
@@ -0,0 +1,77 @@
+/dts-v1/;
+
+/include/ "tegra20.dtsi"
+
+/ {
+	model = "Toshiba AC100 / Dynabook AZ";
+	compatible = "compal,paz00", "nvidia,tegra20";
+
+	memory@0 {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		status = "disable";
+	};
+
+	nvec@7000c500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nvidia,nvec";
+		reg = <0x7000C500 0x100>;
+		interrupts = <0 92 0x04>;
+		clock-frequency = <80000>;
+		request-gpios = <&gpio 170 0>;
+		slave-addr = <138>;
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+	};
+
+	serial@70006000 {
+		clock-frequency = <216000000>;
+	};
+
+	serial@70006040 {
+		status = "disable";
+	};
+
+	serial@70006200 {
+		status = "disable";
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+	};
+
+	serial@70006400 {
+		status = "disable";
+	};
+
+	sdhci@c8000000 {
+		cd-gpios = <&gpio 173 0>; /* gpio PV5 */
+		wp-gpios = <&gpio 57 0>;  /* gpio PH1 */
+		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+	};
+
+	sdhci@c8000200 {
+		status = "disable";
+	};
+
+	sdhci@c8000400 {
+		status = "disable";
+	};
+
+	sdhci@c8000600 {
+		support-8bit;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index a72299b8e668..b55a02e34ba7 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -1,25 +1,65 @@
 /dts-v1/;
 
-/memreserve/ 0x1c000000 0x04000000;
 /include/ "tegra20.dtsi"
 
 / {
 	model = "NVIDIA Seaboard";
 	compatible = "nvidia,seaboard", "nvidia,tegra20";
 
-	chosen {
-		bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk1p3 rw rootwait";
-	};
-
 	memory {
 		device_type = "memory";
 		reg = < 0x00000000 0x40000000 >;
 	};
 
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+
+		adt7461@4c {
+			compatible = "adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	serial@70006000 {
+		status = "disable";
+	};
+
+	serial@70006040 {
+		status = "disable";
+	};
+
+	serial@70006200 {
+		status = "disable";
+	};
+
 	serial@70006300 {
 		clock-frequency = < 216000000 >;
 	};
 
+	serial@70006400 {
+		status = "disable";
+	};
+
+	sdhci@c8000000 {
+		status = "disable";
+	};
+
+	sdhci@c8000200 {
+		status = "disable";
+	};
+
 	sdhci@c8000400 {
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
@@ -29,4 +69,28 @@
 	sdhci@c8000600 {
 		support-8bit;
 	};
+
+	usb@c5000000 {
+		nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio 170 1>; /* gpio PV2, active low */
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio 23 0>; /* gpio PC7 */
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra-trimslice.dts
new file mode 100644
index 000000000000..3b3ee7db99f3
--- /dev/null
+++ b/arch/arm/boot/dts/tegra-trimslice.dts
@@ -0,0 +1,65 @@
+/dts-v1/;
+
+/include/ "tegra20.dtsi"
+
+/ {
+	model = "Compulab TrimSlice board";
+	compatible = "compulab,trimslice", "nvidia,tegra20";
+
+	memory@0 {
+		reg = < 0x00000000 0x40000000 >;
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "disable";
+	};
+
+	serial@70006000 {
+		clock-frequency = < 216000000 >;
+	};
+
+	serial@70006040 {
+		status = "disable";
+	};
+
+	serial@70006200 {
+		status = "disable";
+	};
+
+	serial@70006300 {
+		status = "disable";
+	};
+
+	serial@70006400 {
+		status = "disable";
+	};
+
+	sdhci@c8000000 {
+		status = "disable";
+	};
+
+	sdhci@c8000200 {
+		status = "disable";
+	};
+
+	sdhci@c8000400 {
+		status = "disable";
+	};
+
+	sdhci@c8000600 {
+		cd-gpios = <&gpio 121 0>;
+		wp-gpios = <&gpio 122 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts
index 3f9abd6b6964..c7d3b87f29df 100644
--- a/arch/arm/boot/dts/tegra-ventana.dts
+++ b/arch/arm/boot/dts/tegra-ventana.dts
@@ -1,24 +1,59 @@
 /dts-v1/;
 
-/memreserve/ 0x1c000000 0x04000000;
 /include/ "tegra20.dtsi"
 
 / {
 	model = "NVIDIA Tegra2 Ventana evaluation board";
 	compatible = "nvidia,ventana", "nvidia,tegra20";
 
-	chosen {
-		bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/ram rdinit=/sbin/init";
-	};
-
 	memory {
 		reg = < 0x00000000 0x40000000 >;
 	};
 
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+	};
+
+	serial@70006000 {
+		status = "disable";
+	};
+
+	serial@70006040 {
+		status = "disable";
+	};
+
+	serial@70006200 {
+		status = "disable";
+	};
+
 	serial@70006300 {
 		clock-frequency = < 216000000 >;
 	};
 
+	serial@70006400 {
+		status = "disable";
+	};
+
+	sdhci@c8000000 {
+		status = "disable";
+	};
+
+	sdhci@c8000200 {
+		status = "disable";
+	};
+
 	sdhci@c8000400 {
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 65d7e6a333eb..3da7afd45322 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -5,9 +5,9 @@
 	interrupt-parent = <&intc>;
 
 	intc: interrupt-controller@50041000 {
-		compatible = "nvidia,tegra20-gic";
+		compatible = "arm,cortex-a9-gic";
 		interrupt-controller;
-		#interrupt-cells = <1>;
+		#interrupt-cells = <3>;
 		reg = < 0x50041000 0x1000 >,
 		      < 0x50040100 0x0100 >;
 	};
@@ -17,7 +17,7 @@
 		#size-cells = <0>;
 		compatible = "nvidia,tegra20-i2c";
 		reg = <0x7000C000 0x100>;
-		interrupts = < 70 >;
+		interrupts = < 0 38 0x04 >;
 	};
 
 	i2c@7000c400 {
@@ -25,7 +25,7 @@
 		#size-cells = <0>;
 		compatible = "nvidia,tegra20-i2c";
 		reg = <0x7000C400 0x100>;
-		interrupts = < 116 >;
+		interrupts = < 0 84 0x04 >;
 	};
 
 	i2c@7000c500 {
@@ -33,38 +33,32 @@
 		#size-cells = <0>;
 		compatible = "nvidia,tegra20-i2c";
 		reg = <0x7000C500 0x100>;
-		interrupts = < 124 >;
+		interrupts = < 0 92 0x04 >;
 	};
 
 	i2c@7000d000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "nvidia,tegra20-i2c";
+		compatible = "nvidia,tegra20-i2c-dvc";
 		reg = <0x7000D000 0x200>;
-		interrupts = < 85 >;
+		interrupts = < 0 53 0x04 >;
 	};
 
 	i2s@70002800 {
-		#address-cells = <1>;
-		#size-cells = <0>;
 		compatible = "nvidia,tegra20-i2s";
 		reg = <0x70002800 0x200>;
-		interrupts = < 45 >;
+		interrupts = < 0 13 0x04 >;
 		dma-channel = < 2 >;
 	};
 
 	i2s@70002a00 {
-		#address-cells = <1>;
-		#size-cells = <0>;
 		compatible = "nvidia,tegra20-i2s";
 		reg = <0x70002a00 0x200>;
-		interrupts = < 35 >;
+		interrupts = < 0 3 0x04 >;
 		dma-channel = < 1 >;
 	};
 
 	das@70000c00 {
-		#address-cells = <1>;
-		#size-cells = <0>;
 		compatible = "nvidia,tegra20-das";
 		reg = <0x70000c00 0x80>;
 	};
@@ -72,7 +66,13 @@
 	gpio: gpio@6000d000 {
 		compatible = "nvidia,tegra20-gpio";
 		reg = < 0x6000d000 0x1000 >;
-		interrupts = < 64 65 66 67 87 119 121 >;
+		interrupts = < 0 32 0x04
+			       0 33 0x04
+			       0 34 0x04
+			       0 35 0x04
+			       0 55 0x04
+			       0 87 0x04
+			       0 89 0x04 >;
 		#gpio-cells = <2>;
 		gpio-controller;
 	};
@@ -89,59 +89,80 @@
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006000 0x40>;
 		reg-shift = <2>;
-		interrupts = < 68 >;
+		interrupts = < 0 36 0x04 >;
 	};
 
 	serial@70006040 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006040 0x40>;
 		reg-shift = <2>;
-		interrupts = < 69 >;
+		interrupts = < 0 37 0x04 >;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006200 0x100>;
 		reg-shift = <2>;
-		interrupts = < 78 >;
+		interrupts = < 0 46 0x04 >;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006300 0x100>;
 		reg-shift = <2>;
-		interrupts = < 122 >;
+		interrupts = < 0 90 0x04 >;
 	};
 
 	serial@70006400 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006400 0x100>;
 		reg-shift = <2>;
-		interrupts = < 123 >;
+		interrupts = < 0 91 0x04 >;
 	};
 
 	sdhci@c8000000 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000000 0x200>;
-		interrupts = < 46 >;
+		interrupts = < 0 14 0x04 >;
 	};
 
 	sdhci@c8000200 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000200 0x200>;
-		interrupts = < 47 >;
+		interrupts = < 0 15 0x04 >;
 	};
 
 	sdhci@c8000400 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000400 0x200>;
-		interrupts = < 51 >;
+		interrupts = < 0 19 0x04 >;
 	};
 
 	sdhci@c8000600 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000600 0x200>;
-		interrupts = < 63 >;
+		interrupts = < 0 31 0x04 >;
+	};
+
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		reg = <0xc5000000 0x4000>;
+		interrupts = < 0 20 0x04 >;
+		phy_type = "utmi";
+	};
+
+	usb@c5004000 {
+		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		reg = <0xc5004000 0x4000>;
+		interrupts = < 0 21 0x04 >;
+		phy_type = "ulpi";
+	};
+
+	usb@c5008000 {
+		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		reg = <0xc5008000 0x4000>;
+		interrupts = < 0 97 0x04 >;
+		phy_type = "utmi";
 	};
 };
 
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
new file mode 100644
index 000000000000..ee7db9892e02
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -0,0 +1,127 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "nvidia,tegra30";
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = < 0x50041000 0x1000 >,
+		      < 0x50040100 0x0100 >;
+	};
+
+	i2c@7000c000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible =  "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000C000 0x100>;
+		interrupts = < 0 38 0x04 >;
+	};
+
+	i2c@7000c400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000C400 0x100>;
+		interrupts = < 0 84 0x04 >;
+	};
+
+	i2c@7000c500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000C500 0x100>;
+		interrupts = < 0 92 0x04 >;
+	};
+
+	i2c@7000c700 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c700 0x100>;
+		interrupts = < 0 120 0x04 >;
+	};
+
+	i2c@7000d000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000D000 0x100>;
+		interrupts = < 0 53 0x04 >;
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
+		reg = < 0x6000d000 0x1000 >;
+		interrupts = < 0 32 0x04 0 33 0x04 0 34 0x04 0 35 0x04 0 55 0x04 0 87 0x04 0 89 0x04 >;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	serial@70006000 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = < 0 36 0x04 >;
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = < 0 37 0x04 >;
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006200 0x100>;
+		reg-shift = <2>;
+		interrupts = < 0 46 0x04 >;
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006300 0x100>;
+		reg-shift = <2>;
+		interrupts = < 0 90 0x04 >;
+	};
+
+	serial@70006400 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006400 0x100>;
+		reg-shift = <2>;
+		interrupts = < 0 91 0x04 >;
+	};
+
+	sdhci@78000000 {
+		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+		reg = <0x78000000 0x200>;
+		interrupts = < 0 14 0x04 >;
+	};
+
+	sdhci@78000200 {
+		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+		reg = <0x78000200 0x200>;
+		interrupts = < 0 15 0x04 >;
+	};
+
+	sdhci@78000400 {
+		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+		reg = <0x78000400 0x200>;
+		interrupts = < 0 19 0x04 >;
+	};
+
+	sdhci@78000600 {
+		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+		reg = <0x78000600 0x200>;
+		interrupts = < 0 31 0x04 >;
+	};
+
+	pinmux: pinmux@70000000 {
+		compatible = "nvidia,tegra30-pinmux";
+		reg = < 0x70000868 0xd0     /* Pad control registers */
+			0x70003000 0x3e0 >; /* Mux registers */
+	};
+};
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index e1efbca2a539..b4bdf297e9fa 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -59,6 +59,11 @@ config EXYNOS4_MCT
 	help
 	  Use MCT (Multi Core Timer) as kernel timers
 
+config EXYNOS4_DEV_DMA
+	bool
+	help
+	  Compile in amba device definitions for DMA controller
+
 config EXYNOS4_DEV_AHCI
 	bool
 	help
@@ -179,6 +184,7 @@ config MACH_SMDKV310
 	select SAMSUNG_DEV_BACKLIGHT
 	select EXYNOS4_DEV_AHCI
 	select SAMSUNG_DEV_KEYPAD
+	select EXYNOS4_DEV_DMA
 	select EXYNOS4_DEV_PD
 	select SAMSUNG_DEV_PWM
 	select EXYNOS4_DEV_SYSMMU
@@ -199,6 +205,7 @@ config MACH_ARMLEX4210
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select EXYNOS4_DEV_AHCI
+	select EXYNOS4_DEV_DMA
 	select EXYNOS4_DEV_SYSMMU
 	select EXYNOS4_SETUP_SDHCI
 	help
@@ -224,6 +231,7 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_MFC
 	select S5P_DEV_ONENAND
 	select S5P_DEV_TV
+	select EXYNOS4_DEV_DMA
 	select EXYNOS4_DEV_PD
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
@@ -257,6 +265,7 @@ config MACH_NURI
 	select S5P_DEV_MFC
 	select S5P_DEV_USB_EHCI
 	select S5P_SETUP_MIPIPHY
+	select EXYNOS4_DEV_DMA
 	select EXYNOS4_DEV_PD
 	select EXYNOS4_SETUP_FIMC
 	select EXYNOS4_SETUP_FIMD0
@@ -289,6 +298,7 @@ config MACH_ORIGEN
 	select S5P_DEV_USB_EHCI
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
+	select EXYNOS4_DEV_DMA
 	select EXYNOS4_DEV_PD
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_SDHCI
@@ -329,6 +339,20 @@ config MACH_SMDK4412
 	  Machine support for Samsung SMDK4412
 endif
 
+comment "Flattened Device Tree based board for Exynos4 based SoC"
+
+config MACH_EXYNOS4_DT
+	bool "Samsung Exynos4 Machine using device tree"
+	select CPU_EXYNOS4210
+	select USE_OF
+	select ARM_AMBA
+	select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
+	help
+	  Machine support for Samsung Exynos4 machine with device tree enabled.
+	  Select this if a fdt blob is available for the Exynos4 SoC based board.
+	  Note: This is under development and not all peripherals can be supported
+	  with this machine file.
+
 if ARCH_EXYNOS4
 
 comment "Configuration for HSMMC 8-bit bus width"
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index bcb9efc576e9..fd0d9e9be382 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -19,7 +19,7 @@ obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
-obj-$(CONFIG_ARCH_EXYNOS4)	+= dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= pmu.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
@@ -39,6 +39,8 @@ obj-$(CONFIG_MACH_ORIGEN)		+= mach-origen.o
 obj-$(CONFIG_MACH_SMDK4212)		+= mach-smdk4x12.o
 obj-$(CONFIG_MACH_SMDK4412)		+= mach-smdk4x12.o
 
+obj-$(CONFIG_MACH_EXYNOS4_DT)		+= mach-exynos4-dt.o
+
 # device support
 
 obj-$(CONFIG_ARCH_EXYNOS4)		+= dev-audio.o
@@ -46,6 +48,7 @@ obj-$(CONFIG_EXYNOS4_DEV_AHCI)		+= dev-ahci.o
 obj-$(CONFIG_EXYNOS4_DEV_PD)		+= dev-pd.o
 obj-$(CONFIG_EXYNOS4_DEV_SYSMMU)	+= dev-sysmmu.o
 obj-$(CONFIG_EXYNOS4_DEV_DWMCI)		+= dev-dwmci.o
+obj-$(CONFIG_EXYNOS4_DEV_DMA)		+= dma.o
 
 obj-$(CONFIG_ARCH_EXYNOS4)		+= setup-i2c0.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMC)	+= setup-fimc.o
diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c
index 83616a039b15..befee4e13391 100644
--- a/arch/arm/mach-exynos/clock.c
+++ b/arch/arm/mach-exynos/clock.c
@@ -554,16 +554,6 @@ static struct clk init_clocks_off[] = {
 		.enable		= exynos4_clk_dac_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
-		.name		= "dma",
-		.devname	= "dma-pl330.0",
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "dma",
-		.devname	= "dma-pl330.1",
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
 		.name		= "adc",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 15),
@@ -779,6 +769,20 @@ static struct clk init_clocks[] = {
 	}
 };
 
+static struct clk clk_pdma0 = {
+	.name		= "dma",
+	.devname	= "dma-pl330.0",
+	.enable		= exynos4_clk_ip_fsys_ctrl,
+	.ctrlbit	= (1 << 0),
+};
+
+static struct clk clk_pdma1 = {
+	.name		= "dma",
+	.devname	= "dma-pl330.1",
+	.enable		= exynos4_clk_ip_fsys_ctrl,
+	.ctrlbit	= (1 << 1),
+};
+
 struct clk *clkset_group_list[] = {
 	[0] = &clk_ext_xtal_mux,
 	[1] = &clk_xusbxti,
@@ -1010,46 +1014,6 @@ static struct clksrc_clk clk_dout_mmc4 = {
 
 static struct clksrc_clk clksrcs[] = {
 	{
-		.clk	= {
-			.name		= "uclk1",
-			.devname	= "s5pv210-uart.0",
-			.enable		= exynos4_clksrc_mask_peril0_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "uclk1",
-			.devname	= "s5pv210-uart.1",
-			.enable		= exynos4_clksrc_mask_peril0_ctrl,
-			.ctrlbit	= (1 << 4),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "uclk1",
-			.devname	= "s5pv210-uart.2",
-			.enable		= exynos4_clksrc_mask_peril0_ctrl,
-			.ctrlbit	= (1 << 8),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "uclk1",
-			.devname	= "s5pv210-uart.3",
-			.enable		= exynos4_clksrc_mask_peril0_ctrl,
-			.ctrlbit	= (1 << 12),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 },
-	}, {
 		.clk		= {
 			.name		= "sclk_pwm",
 			.enable		= exynos4_clksrc_mask_peril0_ctrl,
@@ -1238,6 +1202,54 @@ static struct clksrc_clk clksrcs[] = {
 	}
 };
 
+static struct clksrc_clk clk_sclk_uart0 = {
+	.clk	= {
+		.name		= "uclk1",
+		.devname	= "exynos4210-uart.0",
+		.enable		= exynos4_clksrc_mask_peril0_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart1 = {
+	.clk		= {
+		.name		= "uclk1",
+		.devname	= "exynos4210-uart.1",
+		.enable		= exynos4_clksrc_mask_peril0_ctrl,
+		.ctrlbit	= (1 << 4),
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart2 = {
+	.clk		= {
+		.name		= "uclk1",
+		.devname	= "exynos4210-uart.2",
+		.enable		= exynos4_clksrc_mask_peril0_ctrl,
+		.ctrlbit	= (1 << 8),
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart3 = {
+	.clk		= {
+		.name		= "uclk1",
+		.devname	= "exynos4210-uart.3",
+		.enable		= exynos4_clksrc_mask_peril0_ctrl,
+		.ctrlbit	= (1 << 12),
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 },
+};
+
 /* Clock initialization code */
 static struct clksrc_clk *sysclks[] = {
 	&clk_mout_apll,
@@ -1272,6 +1284,27 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_mout_mfc1,
 };
 
+static struct clk *clk_cdev[] = {
+	&clk_pdma0,
+	&clk_pdma1,
+};
+
+static struct clksrc_clk *clksrc_cdev[] = {
+	&clk_sclk_uart0,
+	&clk_sclk_uart1,
+	&clk_sclk_uart2,
+	&clk_sclk_uart3,
+};
+
+static struct clk_lookup exynos4_clk_lookup[] = {
+	CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &clk_sclk_uart0.clk),
+	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &clk_sclk_uart1.clk),
+	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &clk_sclk_uart2.clk),
+	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &clk_sclk_uart3.clk),
+	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0),
+	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1),
+};
+
 static int xtal_rate;
 
 static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
@@ -1479,11 +1512,19 @@ void __init exynos4_register_clocks(void)
 	for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
 		s3c_register_clksrc(sclk_tv[ptr], 1);
 
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+		s3c_register_clksrc(clksrc_cdev[ptr], 1);
+
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
+	s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
+	for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
+		s3c_disable_clocks(clk_cdev[ptr], 1);
+
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup));
 
 	register_syscore_ops(&exynos4_clock_syscore_ops);
 	s3c24xx_register_clock(&dummy_apb_pclk);
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 647c8434610c..c59e18871006 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -17,6 +17,8 @@
 #include <linux/gpio.h>
 #include <linux/sched.h>
 #include <linux/serial_core.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
 
 #include <asm/proc-fns.h>
 #include <asm/exception.h>
@@ -385,6 +387,13 @@ static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
 	}
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id exynos4_dt_irq_match[] = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{},
+};
+#endif
+
 void __init exynos4_init_irq(void)
 {
 	int irq;
@@ -392,7 +401,12 @@ void __init exynos4_init_irq(void)
 
 	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
 
-	gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset);
+	if (!of_have_populated_dt())
+		gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset);
+#ifdef CONFIG_OF
+	else
+		of_irq_init(exynos4_dt_irq_match);
+#endif
 
 	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
 
@@ -460,15 +474,6 @@ int __init exynos_init(void)
 	return device_register(&exynos4_dev);
 }
 
-static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = {
-	[0] = {
-		.name		= "uclk1",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-};
-
 /* uart registration process */
 
 void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
@@ -476,16 +481,10 @@ void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 	struct s3c2410_uartcfg *tcfg = cfg;
 	u32 ucnt;
 
-	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
-		if (!tcfg->clocks) {
-			tcfg->has_fracval = 1;
-			tcfg->clocks = exynos4_serial_clocks;
-			tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
-		}
-		tcfg->flags |= NO_NEED_CHECK_CLKSRC;
-	}
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++)
+		tcfg->has_fracval = 1;
 
-	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+	s3c24xx_init_uartdevs("exynos4210-uart", s5p_uart_resources, cfg, no);
 }
 
 static DEFINE_SPINLOCK(eint_lock);
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 9667c61e64fb..b10fcd270f07 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -24,6 +24,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl330.h>
+#include <linux/of.h>
 
 #include <asm/irq.h>
 #include <plat/devs.h>
@@ -35,95 +36,42 @@
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-struct dma_pl330_peri pdma0_peri[28] = {
-	{
-		.peri_id = (u8)DMACH_PCM0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PCM0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_PCM2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PCM2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ0,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ2,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S0S_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART4_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART4_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS4_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS4_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_AC97_MICIN,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_AC97_PCMIN,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_AC97_PCMOUT,
-		.rqtype = MEMTODEV,
-	},
+u8 pdma0_peri[] = {
+	DMACH_PCM0_RX,
+	DMACH_PCM0_TX,
+	DMACH_PCM2_RX,
+	DMACH_PCM2_TX,
+	DMACH_MSM_REQ0,
+	DMACH_MSM_REQ2,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI2_RX,
+	DMACH_SPI2_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S2_RX,
+	DMACH_I2S2_TX,
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART4_RX,
+	DMACH_UART4_TX,
+	DMACH_SLIMBUS0_RX,
+	DMACH_SLIMBUS0_TX,
+	DMACH_SLIMBUS2_RX,
+	DMACH_SLIMBUS2_TX,
+	DMACH_SLIMBUS4_RX,
+	DMACH_SLIMBUS4_TX,
+	DMACH_AC97_MICIN,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_PCMOUT,
 };
 
 struct dma_pl330_platdata exynos4_pdma0_pdata = {
 	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
-	.peri = pdma0_peri,
+	.peri_id = pdma0_peri,
 };
 
 struct amba_device exynos4_device_pdma0 = {
@@ -142,86 +90,37 @@ struct amba_device exynos4_device_pdma0 = {
 	.periphid = 0x00041330,
 };
 
-struct dma_pl330_peri pdma1_peri[25] = {
-	{
-		.peri_id = (u8)DMACH_PCM0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PCM0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_PCM1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PCM1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ1,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ3,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S0S_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART3_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART3_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS3_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS3_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS5_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS5_TX,
-		.rqtype = MEMTODEV,
-	},
+u8 pdma1_peri[] = {
+	DMACH_PCM0_RX,
+	DMACH_PCM0_TX,
+	DMACH_PCM1_RX,
+	DMACH_PCM1_TX,
+	DMACH_MSM_REQ1,
+	DMACH_MSM_REQ3,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_SLIMBUS1_RX,
+	DMACH_SLIMBUS1_TX,
+	DMACH_SLIMBUS3_RX,
+	DMACH_SLIMBUS3_TX,
+	DMACH_SLIMBUS5_RX,
+	DMACH_SLIMBUS5_TX,
 };
 
 struct dma_pl330_platdata exynos4_pdma1_pdata = {
 	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
-	.peri = pdma1_peri,
+	.peri_id = pdma1_peri,
 };
 
 struct amba_device exynos4_device_pdma1 = {
@@ -242,7 +141,15 @@ struct amba_device exynos4_device_pdma1 = {
 
 static int __init exynos4_dma_init(void)
 {
+	if (of_have_populated_dt())
+		return 0;
+
+	dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
 	amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+
+	dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
 	amba_device_register(&exynos4_device_pdma1, &iomem_resource);
 
 	return 0;
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index dfd4b7eecb90..713dd5251c64 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -17,13 +17,13 @@
 
 /* PPI: Private Peripheral Interrupt */
 
-#define IRQ_PPI(x)		S5P_IRQ(x+16)
+#define IRQ_PPI(x)		(x+16)
 
 #define IRQ_MCT_LOCALTIMER	IRQ_PPI(12)
 
 /* SPI: Shared Peripheral Interrupt */
 
-#define IRQ_SPI(x)		S5P_IRQ(x+32)
+#define IRQ_SPI(x)		(x+32)
 
 #define IRQ_EINT0		IRQ_SPI(16)
 #define IRQ_EINT1		IRQ_SPI(17)
@@ -163,7 +163,9 @@
 #define IRQ_GPIO2_NR_GROUPS	9
 #define IRQ_GPIO_END		(S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
 
+#define IRQ_TIMER_BASE		(IRQ_GPIO_END + 64)
+
 /* Set the default NR_IRQS */
-#define NR_IRQS			(IRQ_GPIO_END + 64)
+#define NR_IRQS			(IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
 
 #endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
new file mode 100644
index 000000000000..85fa02767d67
--- /dev/null
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -0,0 +1,85 @@
+/*
+ * Samsung's Exynos4210 flattened device tree enabled machine
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/of_platform.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/regs-serial.h>
+#include <plat/exynos4.h>
+
+/*
+ * The following lookup table is used to override device names when devices
+ * are registered from device tree. This is temporarily added to enable
+ * device tree support addition for the Exynos4 architecture.
+ *
+ * For drivers that require platform data to be provided from the machine
+ * file, a platform data pointer can also be supplied along with the
+ * devices names. Usually, the platform data elements that cannot be parsed
+ * from the device tree by the drivers (example: function pointers) are
+ * supplied. But it should be noted that this is a temporary mechanism and
+ * at some point, the drivers should be capable of parsing all the platform
+ * data from the device tree.
+ */
+static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART0,
+				"exynos4210-uart.0", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART1,
+				"exynos4210-uart.1", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART2,
+				"exynos4210-uart.2", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART3,
+				"exynos4210-uart.3", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0),
+				"exynos4-sdhci.0", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1),
+				"exynos4-sdhci.1", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2),
+				"exynos4-sdhci.2", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3),
+				"exynos4-sdhci.3", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
+				"s3c2440-i2c.0", NULL),
+	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
+	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
+	{},
+};
+
+static void __init exynos4210_dt_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+}
+
+static void __init exynos4210_dt_machine_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+				exynos4210_auxdata_lookup, NULL);
+}
+
+static char const *exynos4210_dt_compat[] __initdata = {
+	"samsung,exynos4210",
+	NULL
+};
+
+DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
+	/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
+	.init_irq	= exynos4_init_irq,
+	.map_io		= exynos4210_dt_map_io,
+	.init_machine	= exynos4210_dt_machine_init,
+	.timer		= &exynos4_timer,
+	.dt_compat	= exynos4210_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index c6133c6ec18f..feeaf73933dc 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -165,22 +165,6 @@ static struct map_desc bast_iodesc[] __initdata = {
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
 
-static struct s3c24xx_uart_clksrc bast_serial_clocks[] = {
-	[0] = {
-		.name		= "uclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-	[1] = {
-		.name		= "pclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	}
-};
-
-
 static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport	     = 0,
@@ -188,8 +172,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
 		.ucon	     = UCON,
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
-		.clocks	     = bast_serial_clocks,
-		.clocks_size = ARRAY_SIZE(bast_serial_clocks),
 	},
 	[1] = {
 		.hwport	     = 1,
@@ -197,8 +179,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
 		.ucon	     = UCON,
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
-		.clocks	     = bast_serial_clocks,
-		.clocks_size = ARRAY_SIZE(bast_serial_clocks),
 	},
 	/* port 2 is not actually used */
 	[2] = {
@@ -207,8 +187,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
 		.ucon	     = UCON,
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
-		.clocks	     = bast_serial_clocks,
-		.clocks_size = ARRAY_SIZE(bast_serial_clocks),
 	}
 };
 
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index cc7032b5c65b..dbe668a803ef 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -110,23 +110,6 @@ static struct map_desc vr1000_iodesc[] __initdata = {
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
 
-/* uart clock source(s) */
-
-static struct s3c24xx_uart_clksrc vr1000_serial_clocks[] = {
-	[0] = {
-		.name		= "uclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-	[1] = {
-		.name		= "pclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0.
-	}
-};
-
 static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport	     = 0,
@@ -134,8 +117,6 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
 		.ucon	     = UCON,
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
-		.clocks	     = vr1000_serial_clocks,
-		.clocks_size = ARRAY_SIZE(vr1000_serial_clocks),
 	},
 	[1] = {
 		.hwport	     = 1,
@@ -143,8 +124,6 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
 		.ucon	     = UCON,
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
-		.clocks	     = vr1000_serial_clocks,
-		.clocks_size = ARRAY_SIZE(vr1000_serial_clocks),
 	},
 	/* port 2 is not actually used */
 	[2] = {
@@ -153,9 +132,6 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
 		.ucon	     = UCON,
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
-		.clocks	     = vr1000_serial_clocks,
-		.clocks_size = ARRAY_SIZE(vr1000_serial_clocks),
-
 	}
 };
 
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index eea559ec7a58..061b6bb1a557 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -124,12 +124,18 @@ static struct clk s3c2410_armclk = {
 	.id	= -1,
 };
 
+static struct clk_lookup s3c2410_clk_lookup[] = {
+	CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
+	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
+};
+
 void __init s3c2410_init_clocks(int xtal)
 {
 	s3c24xx_register_baseclocks(xtal);
 	s3c2410_setup_clocks();
 	s3c2410_baseclk_add();
 	s3c24xx_register_clock(&s3c2410_armclk);
+	clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup));
 }
 
 struct bus_type s3c2410_subsys = {
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 516881640808..d10b695a9066 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -659,6 +659,12 @@ static struct clk *clks[] __initdata = {
 	&clk_armclk,
 };
 
+static struct clk_lookup s3c2412_clk_lookup[] = {
+	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
+	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk),
+};
+
 int __init s3c2412_baseclk_add(void)
 {
 	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
@@ -751,6 +757,7 @@ int __init s3c2412_baseclk_add(void)
 		s3c2412_clkcon_enable(clkp, 0);
 	}
 
+	clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup));
 	s3c_pwmclk_init();
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index d8957592fdc4..bedbc87a3426 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -33,6 +33,7 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/serial_core.h>
 
 #include <mach/hardware.h>
 #include <linux/atomic.h>
@@ -42,6 +43,7 @@
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
+#include <plat/regs-serial.h>
 
 /* S3C2440 extended clock support */
 
@@ -107,6 +109,46 @@ static struct clk s3c2440_clk_ac97 = {
 	.ctrlbit	= S3C2440_CLKCON_CAMERA,
 };
 
+static unsigned long  s3c2440_fclk_n_getrate(struct clk *clk)
+{
+	unsigned long ucon0, ucon1, ucon2, divisor;
+
+	/* the fun of calculating the uart divisors on the s3c2440 */
+	ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
+	ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
+	ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
+
+	ucon0 &= S3C2440_UCON0_DIVMASK;
+	ucon1 &= S3C2440_UCON1_DIVMASK;
+	ucon2 &= S3C2440_UCON2_DIVMASK;
+
+	if (ucon0 != 0)
+		divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6;
+	else if (ucon1 != 0)
+		divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21;
+	else if (ucon2 != 0)
+		divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36;
+	else
+		/* manual calims 44, seems to be 9 */
+		divisor = 9;
+
+	return clk_get_rate(clk->parent) / divisor;
+}
+
+static struct clk s3c2440_clk_fclk_n = {
+	.name		= "fclk_n",
+	.parent		= &clk_f,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2440_fclk_n_getrate,
+	},
+};
+
+static struct clk_lookup s3c2440_clk_lookup[] = {
+	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
+	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+	CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
+};
+
 static int s3c2440_clk_add(struct device *dev)
 {
 	struct clk *clock_upll;
@@ -125,10 +167,12 @@ static int s3c2440_clk_add(struct device *dev)
 	s3c2440_clk_cam.parent = clock_h;
 	s3c2440_clk_ac97.parent = clock_p;
 	s3c2440_clk_cam_upll.parent = clock_upll;
+	s3c24xx_register_clock(&s3c2440_clk_fclk_n);
 
 	s3c24xx_register_clock(&s3c2440_clk_ac97);
 	s3c24xx_register_clock(&s3c2440_clk_cam);
 	s3c24xx_register_clock(&s3c2440_clk_cam_upll);
+	clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup));
 
 	clk_disable(&s3c2440_clk_ac97);
 	clk_disable(&s3c2440_clk_cam);
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 121ff8d2c887..24569550de1a 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -98,22 +98,6 @@ static struct map_desc anubis_iodesc[] __initdata = {
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
 
-static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = {
-	[0] = {
-		.name		= "uclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-	[1] = {
-		.name		= "pclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	}
-};
-
-
 static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport	     = 0,
@@ -121,8 +105,7 @@ static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
 		.ucon	     = UCON,
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
-		.clocks	     = anubis_serial_clocks,
-		.clocks_size = ARRAY_SIZE(anubis_serial_clocks),
+		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
 	},
 	[1] = {
 		.hwport	     = 2,
@@ -130,8 +113,7 @@ static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
 		.ucon	     = UCON,
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
-		.clocks	     = anubis_serial_clocks,
-		.clocks_size = ARRAY_SIZE(anubis_serial_clocks),
+		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
 	},
 };
 
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index b7e334f07da4..d6a9763110cd 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -59,22 +59,6 @@ static struct map_desc at2440evb_iodesc[] __initdata = {
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
 
-static struct s3c24xx_uart_clksrc at2440evb_serial_clocks[] = {
-	[0] = {
-		.name		= "uclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-	[1] = {
-		.name		= "pclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	}
-};
-
-
 static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport	     = 0,
@@ -82,8 +66,7 @@ static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
 		.ucon	     = UCON,
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
-		.clocks	     = at2440evb_serial_clocks,
-		.clocks_size = ARRAY_SIZE(at2440evb_serial_clocks),
+		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
 	},
 	[1] = {
 		.hwport	     = 1,
@@ -91,8 +74,7 @@ static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
 		.ucon	     = UCON,
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
-		.clocks	     = at2440evb_serial_clocks,
-		.clocks_size = ARRAY_SIZE(at2440evb_serial_clocks),
+		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
 	},
 };
 
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index e795715fba30..4c480ef734f6 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -102,21 +102,6 @@ static struct map_desc osiris_iodesc[] __initdata = {
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
 
-static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
-	[0] = {
-		.name		= "uclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-	[1] = {
-		.name		= "pclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	}
-};
-
 static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport	     = 0,
@@ -124,8 +109,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
 		.ucon	     = UCON,
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
-		.clocks	     = osiris_serial_clocks,
-		.clocks_size = ARRAY_SIZE(osiris_serial_clocks),
+		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
 	},
 	[1] = {
 		.hwport	     = 1,
@@ -133,8 +117,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
 		.ucon	     = UCON,
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
-		.clocks	     = osiris_serial_clocks,
-		.clocks_size = ARRAY_SIZE(osiris_serial_clocks),
+		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
 	},
 	[2] = {
 		.hwport	     = 2,
@@ -142,8 +125,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
 		.ucon	     = UCON,
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
-		.clocks	     = osiris_serial_clocks,
-		.clocks_size = ARRAY_SIZE(osiris_serial_clocks),
+		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
 	}
 };
 
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 332d7533bd96..80077f6472ee 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -70,15 +70,6 @@
 static struct map_desc rx1950_iodesc[] __initdata = {
 };
 
-static struct s3c24xx_uart_clksrc rx1950_serial_clocks[] = {
-	[0] = {
-	       .name = "fclk",
-	       .divisor = 0x0a,
-	       .min_baud = 0,
-	       .max_baud = 0,
-	},
-};
-
 static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
 	[0] = {
 	       .hwport = 0,
@@ -86,8 +77,7 @@ static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
 	       .ucon = 0x3c5,
 	       .ulcon = 0x03,
 	       .ufcon = 0x51,
-	       .clocks = rx1950_serial_clocks,
-	       .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+		.clk_sel = S3C2410_UCON_CLKSEL3,
 	},
 	[1] = {
 	       .hwport = 1,
@@ -95,8 +85,7 @@ static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
 	       .ucon = 0x3c5,
 	       .ulcon = 0x03,
 	       .ufcon = 0x51,
-	       .clocks = rx1950_serial_clocks,
-	       .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+		.clk_sel = S3C2410_UCON_CLKSEL3,
 	},
 	/* IR port */
 	[2] = {
@@ -105,8 +94,7 @@ static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
 	       .ucon = 0x3c5,
 	       .ulcon = 0x43,
 	       .ufcon = 0xf1,
-	       .clocks = rx1950_serial_clocks,
-	       .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+		.clk_sel = S3C2410_UCON_CLKSEL3,
 	},
 };
 
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 80a0972873c2..20103bafbd4b 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -69,16 +69,6 @@ static struct map_desc rx3715_iodesc[] __initdata = {
 	},
 };
 
-
-static struct s3c24xx_uart_clksrc rx3715_serial_clocks[] = {
-	[0] = {
-		.name		= "fclk",
-		.divisor	= 0,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	}
-};
-
 static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
 	[0] = {
 		.hwport	     = 0,
@@ -86,8 +76,7 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
 		.ucon	     = 0x3c5,
 		.ulcon	     = 0x03,
 		.ufcon	     = 0x51,
-		.clocks	     = rx3715_serial_clocks,
-		.clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
+		.clk_sel	= S3C2410_UCON_CLKSEL3,
 	},
 	[1] = {
 		.hwport	     = 1,
@@ -95,8 +84,7 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
 		.ucon	     = 0x3c5,
 		.ulcon	     = 0x03,
 		.ufcon	     = 0x00,
-		.clocks	     = rx3715_serial_clocks,
-		.clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
+		.clk_sel	= S3C2410_UCON_CLKSEL3,
 	},
 	/* IR port */
 	[2] = {
@@ -105,8 +93,7 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
 		.ucon	     = 0x3c5,
 		.ulcon	     = 0x43,
 		.ufcon	     = 0x51,
-		.clocks	     = rx3715_serial_clocks,
-		.clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
+		.clk_sel	= S3C2410_UCON_CLKSEL3,
 	}
 };
 
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 625219b9cefc..a3aafb6768c9 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -617,16 +617,6 @@ static struct clksrc_clk clksrcs[] = {
 		.sources	= &clkset_uhost,
 	}, {
 		.clk	= {
-			.name		= "uclk1",
-			.ctrlbit        = S3C_CLKCON_SCLK_UART,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 13, .size = 1  },
-		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4  },
-		.sources	= &clkset_uart,
-	}, {
-/* Where does UCLK0 come from? */
-		.clk	= {
 			.name		= "spi-bus",
 			.devname	= "s3c64xx-spi.0",
 			.ctrlbit        = S3C_CLKCON_SCLK_SPI0,
@@ -695,6 +685,18 @@ static struct clksrc_clk clksrcs[] = {
 	},
 };
 
+/* Where does UCLK0 come from? */
+static struct clksrc_clk clk_sclk_uclk = {
+	.clk	= {
+		.name		= "uclk1",
+		.ctrlbit        = S3C_CLKCON_SCLK_UART,
+		.enable		= s3c64xx_sclk_ctrl,
+	},
+	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 13, .size = 1  },
+	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4  },
+	.sources	= &clkset_uart,
+};
+
 /* Clock initialisation code */
 
 static struct clksrc_clk *init_parents[] = {
@@ -703,6 +705,15 @@ static struct clksrc_clk *init_parents[] = {
 	&clk_mout_mpll,
 };
 
+static struct clksrc_clk *clksrc_cdev[] = {
+	&clk_sclk_uclk,
+};
+
+static struct clk_lookup s3c64xx_clk_lookup[] = {
+	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
+};
+
 #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
 
 void __init_or_cpufreq s3c64xx_setup_clocks(void)
@@ -811,6 +822,8 @@ static struct clk *clks[] __initdata = {
 void __init s3c64xx_register_clocks(unsigned long xtal, 
 				    unsigned armclk_divlimit)
 {
+	unsigned int cnt;
+
 	armclk_mask = armclk_divlimit;
 
 	s3c24xx_register_baseclocks(xtal);
@@ -823,5 +836,9 @@ void __init s3c64xx_register_clocks(unsigned long xtal,
 
 	s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++)
+		s3c_register_clksrc(clksrc_cdev[cnt], 1);
+	clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup));
+
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index eb4ffe331e1a..4c797ab3b3fd 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -422,15 +422,6 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
 	}, {
 		.clk	= {
-			.name		= "uclk1",
-			.ctrlbit	= (1 << 5),
-			.enable		= s5p64x0_sclk_ctrl,
-		},
-		.sources = &clkset_uart,
-		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
-		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
 			.name		= "sclk_spi",
 			.devname	= "s3c64xx-spi.0",
 			.ctrlbit	= (1 << 20),
@@ -488,6 +479,17 @@ static struct clksrc_clk clksrcs[] = {
 	},
 };
 
+static struct clksrc_clk clk_sclk_uclk = {
+	.clk	= {
+		.name		= "uclk1",
+		.ctrlbit	= (1 << 5),
+		.enable		= s5p64x0_sclk_ctrl,
+	},
+	.sources = &clkset_uart,
+	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
+	.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
+};
+
 /* Clock initialization code */
 static struct clksrc_clk *sysclks[] = {
 	&clk_mout_apll,
@@ -506,6 +508,15 @@ static struct clk dummy_apb_pclk = {
 	.id		= -1,
 };
 
+static struct clksrc_clk *clksrc_cdev[] = {
+	&clk_sclk_uclk,
+};
+
+static struct clk_lookup s5p6440_clk_lookup[] = {
+	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
+	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
+};
+
 void __init_or_cpufreq s5p6440_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -584,9 +595,12 @@ void __init s5p6440_register_clocks(void)
 
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+		s3c_register_clksrc(clksrc_cdev[ptr], 1);
 
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	clkdev_add_table(s5p6440_clk_lookup, ARRAY_SIZE(s5p6440_clk_lookup));
 
 	s3c24xx_register_clock(&dummy_apb_pclk);
 
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index bb7ee912090b..26aa63402d6b 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -444,15 +444,6 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
 	}, {
 		.clk	= {
-			.name		= "uclk1",
-			.ctrlbit	= (1 << 5),
-			.enable		= s5p64x0_sclk_ctrl,
-		},
-		.sources = &clkset_uart,
-		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
-		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
 			.name		= "sclk_spi",
 			.devname	= "s3c64xx-spi.0",
 			.ctrlbit	= (1 << 20),
@@ -537,6 +528,26 @@ static struct clksrc_clk clksrcs[] = {
 	},
 };
 
+static struct clksrc_clk clk_sclk_uclk = {
+	.clk	= {
+		.name		= "uclk1",
+		.ctrlbit	= (1 << 5),
+		.enable		= s5p64x0_sclk_ctrl,
+	},
+	.sources = &clkset_uart,
+	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
+	.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk *clksrc_cdev[] = {
+	&clk_sclk_uclk,
+};
+
+static struct clk_lookup s5p6450_clk_lookup[] = {
+	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
+	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
+};
+
 /* Clock initialization code */
 static struct clksrc_clk *sysclks[] = {
 	&clk_mout_apll,
@@ -635,9 +646,12 @@ void __init s5p6450_register_clocks(void)
 
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+		s3c_register_clksrc(clksrc_cdev[ptr], 1);
 
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	clkdev_add_table(s5p6450_clk_lookup, ARRAY_SIZE(s5p6450_clk_lookup));
 
 	s3c24xx_register_clock(&dummy_apb_pclk);
 
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 28d0b918cd4b..0d50e79fb9fc 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -282,36 +282,7 @@ int __init s5p64x0_init(void)
 	return device_register(&s5p64x0_dev);
 }
 
-static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = {
-	[0] = {
-		.name		= "pclk_low",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-	[1] = {
-		.name		= "uclk1",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-};
-
 /* uart registration process */
-
-void __init s5p64x0_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	struct s3c2410_uartcfg *tcfg = cfg;
-	u32 ucnt;
-
-	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
-		if (!tcfg->clocks) {
-			tcfg->clocks = s5p64x0_serial_clocks;
-			tcfg->clocks_size = ARRAY_SIZE(s5p64x0_serial_clocks);
-		}
-	}
-}
-
 void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 {
 	int uart;
@@ -321,13 +292,11 @@ void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 		s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART;
 	}
 
-	s5p64x0_common_init_uarts(cfg, no);
 	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
 }
 
 void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 {
-	s5p64x0_common_init_uarts(cfg, no);
 	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
 }
 
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index 442dd4ad12da..f820c0744405 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -38,176 +38,74 @@
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-struct dma_pl330_peri s5p6440_pdma_peri[22] = {
-	{
-		.peri_id = (u8)DMACH_UART0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART3_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART3_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = DMACH_MAX,
-	}, {
-		.peri_id = DMACH_MAX,
-	}, {
-		.peri_id = (u8)DMACH_PCM0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_PCM0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_MAX,
-	}, {
-		.peri_id = (u8)DMACH_MAX,
-	}, {
-		.peri_id = (u8)DMACH_MAX,
-	}, {
-		.peri_id = (u8)DMACH_MAX,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_RX,
-		.rqtype = DEVTOMEM,
-	},
+u8 s5p6440_pdma_peri[] = {
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_MAX,
+	DMACH_MAX,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI0_RX,
+	DMACH_MAX,
+	DMACH_MAX,
+	DMACH_MAX,
+	DMACH_MAX,
+	DMACH_SPI1_TX,
+	DMACH_SPI1_RX,
 };
 
 struct dma_pl330_platdata s5p6440_pdma_pdata = {
 	.nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
-	.peri = s5p6440_pdma_peri,
+	.peri_id = s5p6440_pdma_peri,
 };
 
-struct dma_pl330_peri s5p6450_pdma_peri[32] = {
-	{
-		.peri_id = (u8)DMACH_UART0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART3_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART3_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART4_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART4_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_PCM0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_PCM0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PCM1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_PCM1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PCM2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_PCM2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_USI_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_USI_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_MAX,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PWM,
-	}, {
-		.peri_id = (u8)DMACH_UART5_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART5_TX,
-		.rqtype = MEMTODEV,
-	},
+u8 s5p6450_pdma_peri[] = {
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_UART4_RX,
+	DMACH_UART4_TX,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI0_RX,
+	DMACH_PCM1_TX,
+	DMACH_PCM1_RX,
+	DMACH_PCM2_TX,
+	DMACH_PCM2_RX,
+	DMACH_SPI1_TX,
+	DMACH_SPI1_RX,
+	DMACH_USI_TX,
+	DMACH_USI_RX,
+	DMACH_MAX,
+	DMACH_I2S1_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S2_TX,
+	DMACH_I2S2_RX,
+	DMACH_PWM,
+	DMACH_UART5_RX,
+	DMACH_UART5_TX,
 };
 
 struct dma_pl330_platdata s5p6450_pdma_pdata = {
 	.nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
-	.peri = s5p6450_pdma_peri,
+	.peri_id = s5p6450_pdma_peri,
 };
 
 struct amba_device s5p64x0_device_pdma = {
@@ -227,10 +125,15 @@ struct amba_device s5p64x0_device_pdma = {
 
 static int __init s5p64x0_dma_init(void)
 {
-	if (soc_is_s5p6450())
+	if (soc_is_s5p6450()) {
+		dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask);
+		dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask);
 		s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
-	else
+	} else {
+		dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask);
+		dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask);
 		s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
+	}
 
 	amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
 
diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
index 53982db9d259..5b845e849b30 100644
--- a/arch/arm/mach-s5p64x0/include/mach/irqs.h
+++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h
@@ -141,6 +141,8 @@
 
 #define IRQ_EINT_GROUP(grp, x)	(IRQ_EINT_GROUP##grp##_BASE + (x))
 
+#define IRQ_TIMER_BASE		(11)
+
 /* Set the default NR_IRQS */
 
 #define NR_IRQS			(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index c4c74893f53c..49f8c30d58da 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -963,16 +963,6 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
 	}, {
 		.clk	= {
-			.name		= "uclk1",
-			.ctrlbit	= (1 << 3),
-			.enable		= s5pc100_sclk0_ctrl,
-
-		},
-		.sources = &clk_src_group2,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
 			.name		= "sclk_mixer",
 			.ctrlbit	= (1 << 6),
 			.enable		= s5pc100_sclk0_ctrl,
@@ -1099,6 +1089,17 @@ static struct clksrc_clk clksrcs[] = {
 	},
 };
 
+static struct clksrc_clk clk_sclk_uart = {
+	.clk	= {
+		.name		= "uclk1",
+		.ctrlbit	= (1 << 3),
+		.enable		= s5pc100_sclk0_ctrl,
+	},
+	.sources = &clk_src_group2,
+	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
+	.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
+};
+
 /* Clock initialisation code */
 static struct clksrc_clk *sysclks[] = {
 	&clk_mout_apll,
@@ -1128,6 +1129,10 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_sclk_spdif,
 };
 
+static struct clksrc_clk *clksrc_cdev[] = {
+	&clk_sclk_uart,
+};
+
 void __init_or_cpufreq s5pc100_setup_clocks(void)
 {
 	unsigned long xtal;
@@ -1267,6 +1272,11 @@ static struct clk *clks[] __initdata = {
 	&clk_pcmcdclk1,
 };
 
+static struct clk_lookup s5pc100_clk_lookup[] = {
+	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uart.clk),
+};
+
 void __init s5pc100_register_clocks(void)
 {
 	int ptr;
@@ -1278,9 +1288,12 @@ void __init s5pc100_register_clocks(void)
 
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+		s3c_register_clksrc(clksrc_cdev[ptr], 1);
 
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	clkdev_add_table(s5pc100_clk_lookup, ARRAY_SIZE(s5pc100_clk_lookup));
 
 	s3c24xx_register_clock(&dummy_apb_pclk);
 
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index 065a087f5a8b..c841f4d313f2 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -35,100 +35,42 @@
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-struct dma_pl330_peri pdma0_peri[30] = {
-	{
-		.peri_id = (u8)DMACH_UART0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART3_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART3_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = DMACH_IRDA,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S0S_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_AC97_MICIN,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_AC97_PCMIN,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_AC97_PCMOUT,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_EXTERNAL,
-	}, {
-		.peri_id = (u8)DMACH_PWM,
-	}, {
-		.peri_id = (u8)DMACH_SPDIF,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_HSI_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_HSI_TX,
-		.rqtype = MEMTODEV,
-	},
+u8 pdma0_peri[] = {
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_IRDA,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_I2S2_RX,
+	DMACH_I2S2_TX,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_SPI2_RX,
+	DMACH_SPI2_TX,
+	DMACH_AC97_MICIN,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_PCMOUT,
+	DMACH_EXTERNAL,
+	DMACH_PWM,
+	DMACH_SPDIF,
+	DMACH_HSI_RX,
+	DMACH_HSI_TX,
 };
 
 struct dma_pl330_platdata s5pc100_pdma0_pdata = {
 	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
-	.peri = pdma0_peri,
+	.peri_id = pdma0_peri,
 };
 
 struct amba_device s5pc100_device_pdma0 = {
@@ -147,98 +89,42 @@ struct amba_device s5pc100_device_pdma0 = {
 	.periphid = 0x00041330,
 };
 
-struct dma_pl330_peri pdma1_peri[30] = {
-	{
-		.peri_id = (u8)DMACH_UART0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART3_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART3_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = DMACH_IRDA,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S0S_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_PCM0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PCM1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_PCM1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PCM1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ0,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ1,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ2,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ3,
-	},
+u8 pdma1_peri[] = {
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_IRDA,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_I2S2_RX,
+	DMACH_I2S2_TX,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_SPI2_RX,
+	DMACH_SPI2_TX,
+	DMACH_PCM0_RX,
+	DMACH_PCM0_TX,
+	DMACH_PCM1_RX,
+	DMACH_PCM1_TX,
+	DMACH_MSM_REQ0,
+	DMACH_MSM_REQ1,
+	DMACH_MSM_REQ2,
+	DMACH_MSM_REQ3,
 };
 
 struct dma_pl330_platdata s5pc100_pdma1_pdata = {
 	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
-	.peri = pdma1_peri,
+	.peri_id = pdma1_peri,
 };
 
 struct amba_device s5pc100_device_pdma1 = {
@@ -259,7 +145,12 @@ struct amba_device s5pc100_device_pdma1 = {
 
 static int __init s5pc100_dma_init(void)
 {
+	dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
 	amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+
+	dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
 	amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
 
 	return 0;
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index d2eb4757381f..2870f12c7926 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -97,6 +97,8 @@
 #define IRQ_SDMFIQ		S5P_IRQ_VIC2(31)
 #define IRQ_VIC_END		S5P_IRQ_VIC2(31)
 
+#define IRQ_TIMER_BASE		(11)
+
 #define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
 #define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
 
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 04c9b578e626..d8df66887060 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -810,46 +810,6 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLK_DIV6, .shift = 12, .size = 3 },
 	}, {
 		.clk	= {
-			.name		= "uclk1",
-			.devname	= "s5pv210-uart.0",
-			.enable		= s5pv210_clk_mask0_ctrl,
-			.ctrlbit	= (1 << 12),
-		},
-		.sources = &clkset_uart,
-		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 },
-		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "uclk1",
-			.devname	= "s5pv210-uart.1",
-			.enable		= s5pv210_clk_mask0_ctrl,
-			.ctrlbit	= (1 << 13),
-		},
-		.sources = &clkset_uart,
-		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 },
-		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "uclk1",
-			.devname	= "s5pv210-uart.2",
-			.enable		= s5pv210_clk_mask0_ctrl,
-			.ctrlbit	= (1 << 14),
-		},
-		.sources = &clkset_uart,
-		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 },
-		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "uclk1",
-			.devname	= "s5pv210-uart.3",
-			.enable		= s5pv210_clk_mask0_ctrl,
-			.ctrlbit	= (1 << 15),
-		},
-		.sources = &clkset_uart,
-		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 },
-		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 },
-	}, {
-		.clk	= {
 			.name		= "sclk_fimc",
 			.devname	= "s5pv210-fimc.0",
 			.enable		= s5pv210_clk_mask1_ctrl,
@@ -1023,6 +983,61 @@ static struct clksrc_clk clksrcs[] = {
 	},
 };
 
+static struct clksrc_clk clk_sclk_uart0 = {
+	.clk	= {
+		.name		= "uclk1",
+		.devname	= "s5pv210-uart.0",
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 12),
+	},
+	.sources = &clkset_uart,
+	.reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 },
+	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart1 = {
+	.clk		= {
+		.name		= "uclk1",
+		.devname	= "s5pv210-uart.1",
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 13),
+	},
+	.sources = &clkset_uart,
+	.reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 },
+	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart2 = {
+	.clk		= {
+		.name		= "uclk1",
+		.devname	= "s5pv210-uart.2",
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 14),
+	},
+	.sources = &clkset_uart,
+	.reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 },
+	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart3	= {
+	.clk		= {
+		.name		= "uclk1",
+		.devname	= "s5pv210-uart.3",
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 15),
+	},
+	.sources = &clkset_uart,
+	.reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 },
+	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 },
+};
+
+static struct clksrc_clk *clksrc_cdev[] = {
+	&clk_sclk_uart0,
+	&clk_sclk_uart1,
+	&clk_sclk_uart2,
+	&clk_sclk_uart3,
+};
+
 /* Clock initialisation code */
 static struct clksrc_clk *sysclks[] = {
 	&clk_mout_apll,
@@ -1262,6 +1277,14 @@ static struct clk *clks[] __initdata = {
 	&clk_pcmcdclk2,
 };
 
+static struct clk_lookup s5pv210_clk_lookup[] = {
+	CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
+	CLKDEV_INIT("s5pv210-uart.0", "clk_uart_baud1", &clk_sclk_uart0.clk),
+	CLKDEV_INIT("s5pv210-uart.1", "clk_uart_baud1", &clk_sclk_uart1.clk),
+	CLKDEV_INIT("s5pv210-uart.2", "clk_uart_baud1", &clk_sclk_uart2.clk),
+	CLKDEV_INIT("s5pv210-uart.3", "clk_uart_baud1", &clk_sclk_uart3.clk),
+};
+
 void __init s5pv210_register_clocks(void)
 {
 	int ptr;
@@ -1274,11 +1297,15 @@ void __init s5pv210_register_clocks(void)
 	for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
 		s3c_register_clksrc(sclk_tv[ptr], 1);
 
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+		s3c_register_clksrc(clksrc_cdev[ptr], 1);
+
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	clkdev_add_table(s5pv210_clk_lookup, ARRAY_SIZE(s5pv210_clk_lookup));
 
 	s3c24xx_register_clock(&dummy_apb_pclk);
 	s3c_pwmclk_init();
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 0ec393305d7c..9c1bcdcc12c3 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -254,28 +254,9 @@ int __init s5pv210_init(void)
 	return device_register(&s5pv210_dev);
 }
 
-static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = {
-	[0] = {
-		.name		= "pclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-};
-
 /* uart registration process */
 
 void __init s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 {
-	struct s3c2410_uartcfg *tcfg = cfg;
-	u32 ucnt;
-
-	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
-		if (!tcfg->clocks) {
-			tcfg->clocks = s5pv210_serial_clocks;
-			tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks);
-		}
-	}
-
 	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
 }
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index 86b749c18b77..a6113e0267f2 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -35,90 +35,40 @@
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-struct dma_pl330_peri pdma0_peri[28] = {
-	{
-		.peri_id = (u8)DMACH_UART0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART3_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART3_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = DMACH_MAX,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S0S_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_MAX,
-	}, {
-		.peri_id = (u8)DMACH_MAX,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_MAX,
-	}, {
-		.peri_id = (u8)DMACH_MAX,
-	}, {
-		.peri_id = (u8)DMACH_AC97_MICIN,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_AC97_PCMIN,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_AC97_PCMOUT,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_MAX,
-	}, {
-		.peri_id = (u8)DMACH_PWM,
-	}, {
-		.peri_id = (u8)DMACH_SPDIF,
-		.rqtype = MEMTODEV,
-	},
+u8 pdma0_peri[] = {
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_MAX,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_MAX,
+	DMACH_MAX,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_MAX,
+	DMACH_MAX,
+	DMACH_AC97_MICIN,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_PCMOUT,
+	DMACH_MAX,
+	DMACH_PWM,
+	DMACH_SPDIF,
 };
 
 struct dma_pl330_platdata s5pv210_pdma0_pdata = {
 	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
-	.peri = pdma0_peri,
+	.peri_id = pdma0_peri,
 };
 
 struct amba_device s5pv210_device_pdma0 = {
@@ -137,102 +87,44 @@ struct amba_device s5pv210_device_pdma0 = {
 	.periphid = 0x00041330,
 };
 
-struct dma_pl330_peri pdma1_peri[32] = {
-	{
-		.peri_id = (u8)DMACH_UART0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART3_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART3_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = DMACH_MAX,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S0S_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_MAX,
-	}, {
-		.peri_id = (u8)DMACH_MAX,
-	}, {
-		.peri_id = (u8)DMACH_PCM0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PCM0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_PCM1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PCM1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ0,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ1,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ2,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ3,
-	}, {
-		.peri_id = (u8)DMACH_PCM2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PCM2_TX,
-		.rqtype = MEMTODEV,
-	},
+u8 pdma1_peri[] = {
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_MAX,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_I2S2_RX,
+	DMACH_I2S2_TX,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_MAX,
+	DMACH_MAX,
+	DMACH_PCM0_RX,
+	DMACH_PCM0_TX,
+	DMACH_PCM1_RX,
+	DMACH_PCM1_TX,
+	DMACH_MSM_REQ0,
+	DMACH_MSM_REQ1,
+	DMACH_MSM_REQ2,
+	DMACH_MSM_REQ3,
+	DMACH_PCM2_RX,
+	DMACH_PCM2_TX,
 };
 
 struct dma_pl330_platdata s5pv210_pdma1_pdata = {
 	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
-	.peri = pdma1_peri,
+	.peri_id = pdma1_peri,
 };
 
 struct amba_device s5pv210_device_pdma1 = {
@@ -253,7 +145,12 @@ struct amba_device s5pv210_device_pdma1 = {
 
 static int __init s5pv210_dma_init(void)
 {
+	dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask);
 	amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
+
+	dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask);
 	amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
 
 	return 0;
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index 5e0de3a31f3d..e777e010ed2e 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -118,6 +118,8 @@
 #define IRQ_MDNIE3		S5P_IRQ_VIC3(8)
 #define IRQ_VIC_END		S5P_IRQ_VIC3(31)
 
+#define IRQ_TIMER_BASE		(11)
+
 #define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
 #define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
 
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 5be8e9eefc95..c9ec38e82991 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -32,6 +32,8 @@ obj-$(CONFIG_MACH_SEABOARD)             += board-seaboard-pinmux.o
 obj-$(CONFIG_MACH_TEGRA_DT)             += board-dt.o
 obj-$(CONFIG_MACH_TEGRA_DT)             += board-harmony-pinmux.o
 obj-$(CONFIG_MACH_TEGRA_DT)             += board-seaboard-pinmux.o
+obj-$(CONFIG_MACH_TEGRA_DT)             += board-paz00-pinmux.o
+obj-$(CONFIG_MACH_TEGRA_DT)             += board-trimslice-pinmux.o
 
 obj-$(CONFIG_MACH_TRIMSLICE)            += board-trimslice.o
 obj-$(CONFIG_MACH_TRIMSLICE)            += board-trimslice-pinmux.o
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
index bd12c9fb81e8..cf51a000d400 100644
--- a/arch/arm/mach-tegra/Makefile.boot
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -3,5 +3,7 @@ params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00000100
 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00800000
 
 dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb
+dtb-$(CONFIG_MACH_PAZ00) += tegra-paz00.dtb
 dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb
+dtb-$(CONFIG_MACH_TRIMSLICE) += tegra-trimslice.dtb
 dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb
diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c
index e417a8383dbb..46074a2f0b82 100644
--- a/arch/arm/mach-tegra/board-dt.c
+++ b/arch/arm/mach-tegra/board-dt.c
@@ -37,6 +37,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/setup.h>
+#include <asm/hardware/gic.h>
 
 #include <mach/iomap.h>
 #include <mach/irqs.h>
@@ -47,9 +48,22 @@
 #include "devices.h"
 
 void harmony_pinmux_init(void);
+void paz00_pinmux_init(void);
 void seaboard_pinmux_init(void);
+void trimslice_pinmux_init(void);
 void ventana_pinmux_init(void);
 
+static const struct of_device_id tegra_dt_irq_match[] __initconst = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
+	{ }
+};
+
+void __init tegra_dt_init_irq(void)
+{
+	tegra_init_irq();
+	of_irq_init(tegra_dt_irq_match);
+}
+
 struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL),
@@ -58,16 +72,30 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C_BASE, "tegra-i2c.0", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C2_BASE, "tegra-i2c.1", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C3_BASE, "tegra-i2c.2", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_DVC_BASE, "tegra-i2c.3", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra20-i2c-dvc", TEGRA_DVC_BASE, "tegra-i2c.3", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra-i2s.0", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra-i2s.1", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S2_BASE, "tegra-i2s.1", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-das", TEGRA_APB_MISC_DAS_BASE, "tegra-das", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB_BASE, "tegra-ehci.0",
+		       &tegra_ehci1_device.dev.platform_data),
+	OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB2_BASE, "tegra-ehci.1",
+		       &tegra_ehci2_device.dev.platform_data),
+	OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB3_BASE, "tegra-ehci.2",
+		       &tegra_ehci3_device.dev.platform_data),
 	{}
 };
 
 static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
 	/* name		parent		rate		enabled */
 	{ "uartd",	"pll_p",	216000000,	true },
+	{ "usbd",	"clk_m",	12000000,	false },
+	{ "usb2",	"clk_m",	12000000,	false },
+	{ "usb3",	"clk_m",	12000000,	false },
+	{ "pll_a",      "pll_p_out1",   56448000,       true },
+	{ "pll_a_out0", "pll_a",        11289600,       true },
+	{ "cdev1",      NULL,           0,              true },
+	{ "i2s1",       "pll_a_out0",   11289600,       false},
+	{ "i2s2",       "pll_a_out0",   11289600,       false},
 	{ NULL,		NULL,		0,		0},
 };
 
@@ -76,30 +104,21 @@ static struct of_device_id tegra_dt_match_table[] __initdata = {
 	{}
 };
 
-static struct of_device_id tegra_dt_gic_match[] __initdata = {
-	{ .compatible = "nvidia,tegra20-gic", },
-	{}
-};
-
 static struct {
 	char *machine;
 	void (*init)(void);
 } pinmux_configs[] = {
+	{ "compulab,trimslice", trimslice_pinmux_init },
 	{ "nvidia,harmony", harmony_pinmux_init },
+	{ "compal,paz00", paz00_pinmux_init },
 	{ "nvidia,seaboard", seaboard_pinmux_init },
 	{ "nvidia,ventana", ventana_pinmux_init },
 };
 
 static void __init tegra_dt_init(void)
 {
-	struct device_node *node;
 	int i;
 
-	node = of_find_matching_node_by_address(NULL, tegra_dt_gic_match,
-						TEGRA_ARM_INT_DIST_BASE);
-	if (node)
-		irq_domain_add_simple(node, INT_GIC_BASE);
-
 	tegra_clk_init_from_table(tegra_dt_clk_init_table);
 
 	/*
@@ -121,7 +140,9 @@ static void __init tegra_dt_init(void)
 }
 
 static const char * tegra_dt_board_compat[] = {
+	"compulab,trimslice",
 	"nvidia,harmony",
+	"compal,paz00",
 	"nvidia,seaboard",
 	"nvidia,ventana",
 	NULL
@@ -130,7 +151,7 @@ static const char * tegra_dt_board_compat[] = {
 DT_MACHINE_START(TEGRA_DT, "nVidia Tegra (Flattened Device Tree)")
 	.map_io		= tegra_map_common_io,
 	.init_early	= tegra_init_early,
-	.init_irq	= tegra_init_irq,
+	.init_irq	= tegra_dt_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.timer		= &tegra_timer,
 	.init_machine	= tegra_dt_init,
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index 8ad82af6a293..4e1afcd54fae 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/of.h>
 
 #include <asm/hardware/gic.h>
 
@@ -125,6 +126,11 @@ void __init tegra_init_irq(void)
 	gic_arch_extn.irq_unmask = tegra_unmask;
 	gic_arch_extn.irq_retrigger = tegra_retrigger;
 
-	gic_init(0, 29, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE),
-		 IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
+	/*
+	 * Check if there is a devicetree present, since the GIC will be
+	 * initialized elsewhere under DT.
+	 */
+	if (!of_have_populated_dt())
+		gic_init(0, 29, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE),
+			IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
 }
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 5a21b15b2a97..4eab2cca2d92 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -297,13 +297,6 @@ static struct clksrc_clk clk_usb_bus_host = {
 
 static struct clksrc_clk clksrc_clks[] = {
 	{
-		/* ART baud-rate clock sourced from esysclk via a divisor */
-		.clk	= {
-			.name		= "uartclk",
-			.parent		= &clk_esysclk.clk,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
-	}, {
 		/* camera interface bus-clock, divided down from esysclk */
 		.clk	= {
 			.name		= "camif-upll",	/* same as 2440 name */
@@ -323,6 +316,15 @@ static struct clksrc_clk clksrc_clks[] = {
 	},
 };
 
+static struct clksrc_clk clk_esys_uart = {
+	/* ART baud-rate clock sourced from esysclk via a divisor */
+	.clk	= {
+		.name		= "uartclk",
+		.parent		= &clk_esysclk.clk,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
+};
+
 static struct clk clk_i2s_ext = {
 	.name		= "i2s-ext",
 };
@@ -589,6 +591,12 @@ static struct clksrc_clk *clksrcs[] __initdata = {
 	&clk_arm,
 };
 
+static struct clk_lookup s3c2443_clk_lookup[] = {
+	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
+	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
+};
+
 void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
 				       unsigned int *divs, int nr_divs,
 				       int divmask)
@@ -618,6 +626,7 @@ void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
 	/* See s3c2443/etc notes on disabling clocks at init time */
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
 
 	s3c2443_common_setup_clocks(get_mpll);
 }
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
index 93a994a5dd8f..2cded872f22b 100644
--- a/arch/arm/plat-samsung/dma-ops.c
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -18,23 +18,24 @@
 
 #include <mach/dma.h>
 
-static inline bool pl330_filter(struct dma_chan *chan, void *param)
-{
-	struct dma_pl330_peri *peri = chan->private;
-	return peri->peri_id == (unsigned)param;
-}
-
 static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
 				struct samsung_dma_info *info)
 {
 	struct dma_chan *chan;
 	dma_cap_mask_t mask;
 	struct dma_slave_config slave_config;
+	void *filter_param;
 
 	dma_cap_zero(mask);
 	dma_cap_set(info->cap, mask);
 
-	chan = dma_request_channel(mask, pl330_filter, (void *)dma_ch);
+	/*
+	 * If a dma channel property of a device node from device tree is
+	 * specified, use that as the fliter parameter.
+	 */
+	filter_param = (dma_ch == DMACH_DT_PROP) ? (void *)info->dt_dmach_prop :
+				(void *)dma_ch;
+	chan = dma_request_channel(mask, pl330_filter, filter_param);
 
 	if (info->direction == DMA_FROM_DEVICE) {
 		memset(&slave_config, 0, sizeof(struct dma_slave_config));
diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h
index 4c1a363526cf..22eafc310bd7 100644
--- a/arch/arm/plat-samsung/include/plat/dma-ops.h
+++ b/arch/arm/plat-samsung/include/plat/dma-ops.h
@@ -31,6 +31,7 @@ struct samsung_dma_info {
 	enum dma_slave_buswidth width;
 	dma_addr_t fifo;
 	struct s3c2410_dma_client *client;
+	struct property *dt_dmach_prop;
 };
 
 struct samsung_dma_ops {
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
index 2e55e5958674..c5eaad529de5 100644
--- a/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -21,7 +21,8 @@
  * use these just as IDs.
  */
 enum dma_ch {
-	DMACH_UART0_RX,
+	DMACH_DT_PROP = -1,
+	DMACH_UART0_RX = 0,
 	DMACH_UART0_TX,
 	DMACH_UART1_RX,
 	DMACH_UART1_TX,
diff --git a/arch/arm/plat-samsung/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h
index 08d1a7ef97b7..df46b776976a 100644
--- a/arch/arm/plat-samsung/include/plat/irqs.h
+++ b/arch/arm/plat-samsung/include/plat/irqs.h
@@ -44,13 +44,14 @@
 #define S5P_IRQ_VIC2(x)		(S5P_VIC2_BASE + (x))
 #define S5P_IRQ_VIC3(x)		(S5P_VIC3_BASE + (x))
 
-#define S5P_TIMER_IRQ(x)	(11 + (x))
+#define S5P_TIMER_IRQ(x)	(IRQ_TIMER_BASE + (x))
 
 #define IRQ_TIMER0		S5P_TIMER_IRQ(0)
 #define IRQ_TIMER1		S5P_TIMER_IRQ(1)
 #define IRQ_TIMER2		S5P_TIMER_IRQ(2)
 #define IRQ_TIMER3		S5P_TIMER_IRQ(3)
 #define IRQ_TIMER4		S5P_TIMER_IRQ(4)
+#define IRQ_TIMER_COUNT		(5)
 
 #define IRQ_EINT(x)		((x) < 16 ? ((x) + S5P_EINT_BASE1) \
 					: ((x) - 16 + S5P_EINT_BASE2))
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
index 720734847027..29c26a818842 100644
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -71,6 +71,7 @@
 #define S3C2410_LCON_IRM          (1<<6)
 
 #define S3C2440_UCON_CLKMASK	  (3<<10)
+#define S3C2440_UCON_CLKSHIFT	  (10)
 #define S3C2440_UCON_PCLK	  (0<<10)
 #define S3C2440_UCON_UCLK	  (1<<10)
 #define S3C2440_UCON_PCLK2	  (2<<10)
@@ -78,6 +79,7 @@
 #define S3C2443_UCON_EPLL	  (3<<10)
 
 #define S3C6400_UCON_CLKMASK	(3<<10)
+#define S3C6400_UCON_CLKSHIFT	(10)
 #define S3C6400_UCON_PCLK	(0<<10)
 #define S3C6400_UCON_PCLK2	(2<<10)
 #define S3C6400_UCON_UCLK0	(1<<10)
@@ -90,11 +92,14 @@
 #define S3C2440_UCON_DIVSHIFT	  (12)
 
 #define S3C2412_UCON_CLKMASK	(3<<10)
+#define S3C2412_UCON_CLKSHIFT	(10)
 #define S3C2412_UCON_UCLK	(1<<10)
 #define S3C2412_UCON_USYSCLK	(3<<10)
 #define S3C2412_UCON_PCLK	(0<<10)
 #define S3C2412_UCON_PCLK2	(2<<10)
 
+#define S3C2410_UCON_CLKMASK	(1 << 10)
+#define S3C2410_UCON_CLKSHIFT	(10)
 #define S3C2410_UCON_UCLK	  (1<<10)
 #define S3C2410_UCON_SBREAK	  (1<<4)
 
@@ -193,6 +198,7 @@
 
 /* Following are specific to S5PV210 */
 #define S5PV210_UCON_CLKMASK	(1<<10)
+#define S5PV210_UCON_CLKSHIFT	(10)
 #define S5PV210_UCON_PCLK	(0<<10)
 #define S5PV210_UCON_UCLK	(1<<10)
 
@@ -221,29 +227,24 @@
 #define S5PV210_UFSTAT_RXMASK	(255<<0)
 #define S5PV210_UFSTAT_RXSHIFT	(0)
 
-#define NO_NEED_CHECK_CLKSRC	1
+#define S3C2410_UCON_CLKSEL0	(1 << 0)
+#define S3C2410_UCON_CLKSEL1	(1 << 1)
+#define S3C2410_UCON_CLKSEL2	(1 << 2)
+#define S3C2410_UCON_CLKSEL3	(1 << 3)
 
-#ifndef __ASSEMBLY__
+/* Default values for s5pv210 UCON and UFCON uart registers */
+#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
 
-/* struct s3c24xx_uart_clksrc
- *
- * this structure defines a named clock source that can be used for the
- * uart, so that the best clock can be selected for the requested baud
- * rate.
- *
- * min_baud and max_baud define the range of baud-rates this clock is
- * acceptable for, if they are both zero, it is assumed any baud rate that
- * can be generated from this clock will be used.
- *
- * divisor gives the divisor from the clock to the one seen by the uart
-*/
+#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
 
-struct s3c24xx_uart_clksrc {
-	const char	*name;
-	unsigned int	 divisor;
-	unsigned int	 min_baud;
-	unsigned int	 max_baud;
-};
+#ifndef __ASSEMBLY__
 
 /* configuration structure for per-machine configurations for the
  * serial port
@@ -257,15 +258,13 @@ struct s3c2410_uartcfg {
 	unsigned char	   unused;
 	unsigned short	   flags;
 	upf_t		   uart_flags;	 /* default uart flags */
+	unsigned int	   clk_sel;
 
 	unsigned int	   has_fracval;
 
 	unsigned long	   ucon;	 /* value of ucon for port */
 	unsigned long	   ulcon;	 /* value of ulcon for port */
 	unsigned long	   ufcon;	 /* value of ufcon for port */
-
-	struct s3c24xx_uart_clksrc *clocks;
-	unsigned int		    clocks_size;
 };
 
 /* s3c24xx_uart_devs