summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-07-26 12:42:40 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-07-26 12:42:40 -0700
commitfef36a7a31c122270038122752373bd38977dd7f (patch)
treea326dc19a5288b28047dc689bff447641e83be41 /arch
parentdb8cbfadcf9073cc6401ebcf90392c5ce6e93f34 (diff)
parent515c0967205f2e6d0ca1602ce0de65f9aec1d215 (diff)
downloadlinux-fef36a7a31c122270038122752373bd38977dd7f.tar.bz2
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson: "This is a largeish batch of fixes, mostly because I missed -rc2 due to travel/vacation. So in number these are a bit more than ideal unless you amortize them over two -rcs. Quick breakdown: - Defconfig updates - Making multi_v7_defconfig useful on more hardware to encourage single-image usage - Davinci and nomadik updates due to new code merged this merge window - Fixes for UART on Samsung platforms, both PM and clock-related - A handful of warning fixes from defconfig builds, including for max8925 backlight and pxamci (both with appropriate acks) - Exynos5440 fixes for LPAE configuration, PM - ...plus a bunch of other smaller changes all over the place I expect to switch to regressions-or-severe-bugs-only fixes from here on out" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) mfd: max8925: fix dt code for backlight ARM: omap5: Only select errata 798181 if SMP ARM: EXYNOS: Update CONFIG_ARCH_NR_GPIO for Exynos ARM: EXYNOS: Fix low level debug support ARM: SAMSUNG: Save/restore only selected uart's registers ARM: SAMSUNG: Add SAMSUNG_PM config option to select pm ARM: S3C24XX: Add missing clkdev entries for s3c2440 UART ARM: multi_v7_defconfig: Select USB chipidea driver ARM: pxa: propagate errors from regulator_enable() to pxamci ARM: zynq: fix compilation warning ARM: keystone: fix compilation warning ARM: highbank: Only touch common coherency control register fields ARM: footbridge: fix overlapping PCI mappings dmaengine: shdma: fix a build failure on platforms with no DMA support ARM: STi: Set correct ARM ERRATAs. ARM: dts: STi: Fix pinconf setup for STiH416 serial2 ARM: nomadik: configure for NO_HZ and HRTIMERS ARM: nomadik: update defconfig base ARM: nomadik: Update MMC defconfigs ARM: davinci: defconfig: enable EDMA driver ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig3
-rw-r--r--arch/arm/boot/dts/imx28-apx4devkit.dts2
-rw-r--r--arch/arm/boot/dts/imx28-evk.dts2
-rw-r--r--arch/arm/boot/dts/imx28-m28evk.dts2
-rw-r--r--arch/arm/boot/dts/imx28.dtsi1
-rw-r--r--arch/arm/boot/dts/imx51-babbage.dts13
-rw-r--r--arch/arm/boot/dts/imx53-mba53.dts2
-rw-r--r--arch/arm/boot/dts/imx53.dtsi32
-rw-r--r--arch/arm/boot/dts/stih416-pinctrl.dtsi10
-rw-r--r--arch/arm/boot/dts/stih416.dtsi2
-rw-r--r--arch/arm/boot/dts/twl4030.dtsi6
-rw-r--r--arch/arm/boot/dts/vf610.dtsi8
-rw-r--r--arch/arm/common/edma.c1
-rw-r--r--arch/arm/configs/da8xx_omapl_defconfig2
-rw-r--r--arch/arm/configs/davinci_all_defconfig2
-rw-r--r--arch/arm/configs/multi_v7_defconfig6
-rw-r--r--arch/arm/configs/nhk8815_defconfig7
-rw-r--r--arch/arm/mach-davinci/board-dm365-evm.c2
-rw-r--r--arch/arm/mach-davinci/dm355.c2
-rw-r--r--arch/arm/mach-davinci/dm365.c2
-rw-r--r--arch/arm/mach-exynos/Kconfig1
-rw-r--r--arch/arm/mach-exynos/Makefile2
-rw-r--r--arch/arm/mach-exynos/common.c26
-rw-r--r--arch/arm/mach-exynos/common.h1
-rw-r--r--arch/arm/mach-exynos/cpuidle.c1
-rw-r--r--arch/arm/mach-exynos/include/mach/memory.h5
-rw-r--r--arch/arm/mach-exynos/pm.c6
-rw-r--r--arch/arm/mach-footbridge/dc21285.c2
-rw-r--r--arch/arm/mach-highbank/highbank.c7
-rw-r--r--arch/arm/mach-imx/clk-imx6q.c5
-rw-r--r--arch/arm/mach-imx/clk-vf610.c2
-rw-r--r--arch/arm/mach-imx/mx27.h2
-rw-r--r--arch/arm/mach-keystone/keystone.c2
-rw-r--r--arch/arm/mach-omap2/Kconfig2
-rw-r--r--arch/arm/mach-omap2/board-generic.c23
-rw-r--r--arch/arm/mach-pxa/em-x270.c17
-rw-r--r--arch/arm/mach-pxa/mainstone.c3
-rw-r--r--arch/arm/mach-pxa/pcm990-baseboard.c3
-rw-r--r--arch/arm/mach-pxa/poodle.c4
-rw-r--r--arch/arm/mach-pxa/spitz.c4
-rw-r--r--arch/arm/mach-pxa/stargate2.c3
-rw-r--r--arch/arm/mach-s3c24xx/clock-s3c2410.c161
-rw-r--r--arch/arm/mach-s3c24xx/clock-s3c2440.c3
-rw-r--r--arch/arm/mach-sti/Kconfig3
-rw-r--r--arch/arm/mach-zynq/common.c2
-rw-r--r--arch/arm/plat-samsung/Kconfig7
-rw-r--r--arch/arm/plat-samsung/Makefile2
-rw-r--r--arch/arm/plat-samsung/include/plat/clock.h5
-rw-r--r--arch/arm/plat-samsung/include/plat/pm.h8
-rw-r--r--arch/arm/plat-samsung/pm.c14
50 files changed, 268 insertions, 165 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ba412e02ec0c..37c0f4e978d4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1600,8 +1600,7 @@ config LOCAL_TIMERS
config ARCH_NR_GPIO
int
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
- default 512 if SOC_OMAP5
- default 512 if ARCH_KEYSTONE
+ default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5
default 392 if ARCH_U8500
default 352 if ARCH_VT8500
default 288 if ARCH_SUNXI
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 43bf3c796cba..0e7fed47bd8d 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -147,7 +147,7 @@
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
-
+ clocks = <&saif0>;
};
pcf8563: rtc@51 {
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 1f0d38d7b16f..e035f4664b97 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -195,7 +195,7 @@
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
-
+ clocks = <&saif0>;
};
at24@51 {
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 880df2f13be8..44d9da57736e 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -184,7 +184,7 @@
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
-
+ clocks = <&saif0>;
};
eeprom: eeprom@51 {
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 6a8acb01b1d3..9524a0571281 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -837,6 +837,7 @@
compatible = "fsl,imx28-saif";
reg = <0x80042000 0x2000>;
interrupts = <59 80>;
+ #clock-cells = <0>;
clocks = <&clks 53>;
dmas = <&dma_apbx 4>;
dma-names = "rx-tx";
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 6dd9486c755b..ad3471ca17c7 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -61,6 +61,16 @@
mux-int-port = <2>;
mux-ext-port = <3>;
};
+
+ clocks {
+ clk_26M: codec_clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ gpios = <&gpio4 26 1>;
+ };
+ };
};
&esdhc1 {
@@ -229,6 +239,7 @@
MX51_PAD_EIM_A27__GPIO2_21 0x5
MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
+ MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000
>;
};
};
@@ -255,7 +266,7 @@
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clock-frequency = <26000000>;
+ clocks = <&clk_26M>;
VDDA-supply = <&vdig_reg>;
VDDIO-supply = <&vvideo_reg>;
};
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index aaa33bc99f78..a63090267941 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -27,7 +27,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm2 0 50000 0 0>;
+ pwms = <&pwm2 0 50000>;
brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
default-brightness-level = <10>;
enable-gpios = <&gpio7 7 0>;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 3895fbba8fce..569aa9f2c4ed 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -725,15 +725,15 @@
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1c5
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1c5
+ MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
+ MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
>;
};
pinctrl_uart1_2: uart1grp-2 {
fsl,pins = <
- MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1c5
- MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
>;
};
@@ -748,8 +748,8 @@
uart2 {
pinctrl_uart2_1: uart2grp-1 {
fsl,pins = <
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
>;
};
@@ -766,17 +766,17 @@
uart3 {
pinctrl_uart3_1: uart3grp-1 {
fsl,pins = <
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
- MX53_PAD_PATA_DA_1__UART3_CTS 0x1c5
- MX53_PAD_PATA_DA_2__UART3_RTS 0x1c5
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4
+ MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
>;
};
pinctrl_uart3_2: uart3grp-2 {
fsl,pins = <
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
>;
};
@@ -785,8 +785,8 @@
uart4 {
pinctrl_uart4_1: uart4grp-1 {
fsl,pins = <
- MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1c5
- MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1c5
+ MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4
+ MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4
>;
};
};
@@ -794,8 +794,8 @@
uart5 {
pinctrl_uart5_1: uart5grp-1 {
fsl,pins = <
- MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1c5
- MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1c5
+ MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4
+ MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4
>;
};
};
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index 957b21a71b4b..0f246c979262 100644
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -166,6 +166,15 @@
reg = <0x9000 0x100>;
st,bank-name = "PIO31";
};
+
+ serial2-oe {
+ pinctrl_serial2_oe: serial2-1 {
+ st,pins {
+ output-enable = <&PIO11 3 ALT2 OUT>;
+ };
+ };
+ };
+
};
pin-controller-rear {
@@ -218,7 +227,6 @@
st,pins {
tx = <&PIO17 4 ALT2 OUT>;
rx = <&PIO17 5 ALT2 IN>;
- output-enable = <&PIO11 3 ALT2 OUT>;
};
};
};
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 3cecd9689a49..1a0326ea7d07 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -79,7 +79,7 @@
interrupts = <0 197 0>;
clocks = <&CLK_S_ICN_REG_0>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_serial2>;
+ pinctrl-0 = <&pinctrl_serial2 &pinctrl_serial2_oe>;
};
/* SBC_UART1 */
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index b3034da00a37..ae6a17aed9ee 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -47,6 +47,12 @@
regulator-max-microvolt = <3150000>;
};
+ vmmc2: regulator-vmmc2 {
+ compatible = "ti,twl4030-vmmc2";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
vusb1v5: regulator-vusb1v5 {
compatible = "ti,twl4030-vusb1v5";
};
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index e1eb7dadda80..67d929cf9804 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -442,8 +442,8 @@
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
interrupts = <0 78 0x04>;
- clocks = <&clks VF610_CLK_ENET>,
- <&clks VF610_CLK_ENET>,
+ clocks = <&clks VF610_CLK_ENET0>,
+ <&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
@@ -453,8 +453,8 @@
compatible = "fsl,mvf600-fec";
reg = <0x400d1000 0x1000>;
interrupts = <0 79 0x04>;
- clocks = <&clks VF610_CLK_ENET>,
- <&clks VF610_CLK_ENET>,
+ clocks = <&clks VF610_CLK_ENET1>,
+ <&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index a432e6c1dac1..39ad030ac0c7 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -26,7 +26,6 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/edma.h>
-#include <linux/err.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_dma.h>
diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig
index 7c868139bdb0..1571bea48bed 100644
--- a/arch/arm/configs/da8xx_omapl_defconfig
+++ b/arch/arm/configs/da8xx_omapl_defconfig
@@ -102,6 +102,8 @@ CONFIG_SND_SOC=m
CONFIG_SND_DAVINCI_SOC=m
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
+CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_XFS_FS=m
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index c86fd75e181a..ab2f7378352c 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -162,6 +162,8 @@ CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_XFS_FS=m
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index fe0bdc361d2c..6e572c64cf5a 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -53,6 +53,7 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_OMAP_OCP2SCP=y
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_SATA_AHCI_PLATFORM=y
@@ -61,6 +62,7 @@ CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
CONFIG_SUN4I_EMAC=y
CONFIG_NET_CALXEDA_XGMAC=y
+CONFIG_KS8851=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
CONFIG_MDIO_SUN4I=y
@@ -89,6 +91,7 @@ CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_SIRF=y
CONFIG_I2C_TEGRA=y
CONFIG_SPI=y
+CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_PL022=y
CONFIG_SPI_SIRF=y
CONFIG_SPI_TEGRA114=y
@@ -111,11 +114,12 @@ CONFIG_FB_SIMPLE=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_AB8500_USB=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_OMAP_USB2=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 35f8cf299fa2..263ae3869e32 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -1,6 +1,8 @@
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -48,7 +50,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_TESTS=m
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=y
@@ -94,8 +95,10 @@ CONFIG_I2C_GPIO=y
CONFIG_I2C_NOMADIK=y
CONFIG_DEBUG_GPIO=y
# CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
CONFIG_MMC=y
-CONFIG_MMC_CLKGATE=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index afbc439f11d4..4cdb61c54459 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -505,7 +505,7 @@ static struct vpbe_output dm365evm_vpbe_outputs[] = {
/*
* Amplifiers on the board
*/
-struct ths7303_platform_data ths7303_pdata = {
+static struct ths7303_platform_data ths7303_pdata = {
.ch_1 = 3,
.ch_2 = 3,
.ch_3 = 3,
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 42ef53f62c6c..86100d179694 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -860,7 +860,7 @@ static struct platform_device dm355_vpbe_display = {
},
};
-struct venc_platform_data dm355_venc_pdata = {
+static struct venc_platform_data dm355_venc_pdata = {
.setup_pinmux = dm355_vpbe_setup_pinmux,
.setup_clock = dm355_venc_setup_clock,
};
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index fa7af5eda52d..dad28029ba9b 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1349,7 +1349,7 @@ static struct platform_device dm365_vpbe_display = {
},
};
-struct venc_platform_data dm365_venc_pdata = {
+static struct venc_platform_data dm365_venc_pdata = {
.setup_pinmux = dm365_vpbe_setup_pinmux,
.setup_clock = dm365_venc_setup_clock,
};
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 855d4a7b462d..5952e68c76c4 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -92,6 +92,7 @@ config SOC_EXYNOS5440
bool "SAMSUNG EXYNOS5440"
default y
depends on ARCH_EXYNOS5
+ select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_HAS_OPP
select HAVE_ARM_ARCH_TIMER
select AUTO_ZRELADDR
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index e970a7a4e278..53696154aead 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -14,7 +14,7 @@ obj- :=
obj-$(CONFIG_ARCH_EXYNOS) += common.o
-obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_S5P_PM) += pm.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 164685bd25c8..ba95e5db2501 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -58,7 +58,6 @@ static const char name_exynos5440[] = "EXYNOS5440";
static void exynos4_map_io(void);
static void exynos5_map_io(void);
-static void exynos5440_map_io(void);
static int exynos_init(void);
static struct cpu_table cpu_ids[] __initdata = {
@@ -95,7 +94,6 @@ static struct cpu_table cpu_ids[] __initdata = {
}, {
.idcode = EXYNOS5440_SOC_ID,
.idmask = EXYNOS5_SOC_MASK,
- .map_io = exynos5440_map_io,
.init = exynos_init,
.name = name_exynos5440,
},
@@ -150,11 +148,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
.length = SZ_64K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(EXYNOS4_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
.length = SZ_128K,
@@ -268,20 +261,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
.pfn = __phys_to_pfn(EXYNOS5_PA_PMU),
.length = SZ_64K,
.type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(EXYNOS5_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos5440_iodesc0[] __initdata = {
- {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(EXYNOS5440_PA_UART0),
- .length = SZ_512K,
- .type = MT_DEVICE,
},
};
@@ -388,11 +367,6 @@ static void __init exynos5_map_io(void)
iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
}
-static void __init exynos5440_map_io(void)
-{
- iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
-}
-
void __init exynos_init_time(void)
{
of_clk_init(NULL);
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 3e156bcddcb4..972490fc09d6 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -97,6 +97,5 @@ struct exynos_pmu_conf {
};
extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
-extern void s3c_cpu_resume(void);
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 17a18ff3d71e..225ee8431c72 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -25,6 +25,7 @@
#include <mach/regs-pmu.h>
#include <plat/cpu.h>
+#include <plat/pm.h>
#include "common.h"
diff --git a/arch/arm/mach-exynos/include/mach/memory.h b/arch/arm/mach-exynos/include/mach/memory.h
index 374ef2cf7152..2a4cdb7cb326 100644
--- a/arch/arm/mach-exynos/include/mach/memory.h
+++ b/arch/arm/mach-exynos/include/mach/memory.h
@@ -15,8 +15,13 @@
#define PLAT_PHYS_OFFSET UL(0x40000000)
+#ifndef CONFIG_ARM_LPAE
/* Maximum of 256MiB in one bank */
#define MAX_PHYSMEM_BITS 32
#define SECTION_SIZE_BITS 28
+#else
+#define MAX_PHYSMEM_BITS 36
+#define SECTION_SIZE_BITS 31
+#endif
#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 41c20692a13f..c679db577269 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -217,6 +217,9 @@ static __init int exynos_pm_drvinit(void)
struct clk *pll_base;
unsigned int tmp;
+ if (soc_is_exynos5440())
+ return 0;
+
s3c_pm_init();
/* All wakeup disable */
@@ -340,6 +343,9 @@ static struct syscore_ops exynos_pm_syscore_ops = {
static __init int exynos_pm_syscore_init(void)
{
+ if (soc_is_exynos5440())
+ return 0;
+
register_syscore_ops(&exynos_pm_syscore_ops);
return 0;
}
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index a7cd2cf5e08d..3490a24f969e 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -276,8 +276,6 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
sys->mem_offset = DC21285_PCI_MEM;
- pci_ioremap_io(0, DC21285_PCI_IO);
-
pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset);
pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index dc5d6becd8c7..88815795fe26 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -115,6 +115,7 @@ static int highbank_platform_notifier(struct notifier_block *nb,
{
struct resource *res;
int reg = -1;
+ u32 val;
struct device *dev = __dev;
if (event != BUS_NOTIFY_ADD_DEVICE)
@@ -141,10 +142,10 @@ static int highbank_platform_notifier(struct notifier_block *nb,
return NOTIFY_DONE;
if (of_property_read_bool(dev->of_node, "dma-coherent")) {
- writel(0xff31, sregs_base + reg);
+ val = readl(sregs_base + reg);
+ writel(val | 0xff01, sregs_base + reg);
set_dma_ops(dev, &arm_coherent_dma_ops);
- } else
- writel(0, sregs_base + reg);
+ }
return NOTIFY_OK;
}
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 4282e99f5ca1..86567d980b07 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -199,7 +199,8 @@ static const char *pcie_axi_sels[] = { "axi", "ahb", };
static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
-static const char *emi_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *emi_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
+static const char *emi_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *vdo_axi_sels[] = { "axi", "ahb", };
static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
@@ -392,7 +393,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[usdhc4_sel] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
clk[enfc_sel] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
clk[emi_sel] = imx_clk_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels));
- clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_sels, ARRAY_SIZE(emi_sels));
+ clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels));
clk[vdo_axi_sel] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels));
clk[vpu_axi_sel] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
clk[cko1_sel] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c
index d617c0b7c809..b169a396d93b 100644
--- a/arch/arm/mach-imx/clk-vf610.c
+++ b/arch/arm/mach-imx/clk-vf610.c
@@ -183,6 +183,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7);
clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24);
clk[VF610_CLK_ENET_TS] = imx_clk_gate("enet_ts", "enet_ts_sel", CCM_CSCDR1, 23);
+ clk[VF610_CLK_ENET0] = imx_clk_gate2("enet0", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(0));
+ clk[VF610_CLK_ENET1] = imx_clk_gate2("enet1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(1));
clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7));
diff --git a/arch/arm/mach-imx/mx27.h b/arch/arm/mach-imx/mx27.h
index e074616d54ca..8a65f192e7f3 100644
--- a/arch/arm/mach-imx/mx27.h
+++ b/arch/arm/mach-imx/mx27.h
@@ -135,7 +135,7 @@
#define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4)
#define MX27_INT_RTIC (NR_IRQS_LEGACY + 5)
#define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6)
-#define MX27_INT_SDHC (NR_IRQS_LEGACY + 7)
+#define MX27_INT_MSHC (NR_IRQS_LEGACY + 7)
#define MX27_INT_GPIO (NR_IRQS_LEGACY + 8)
#define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9)
#define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10)
diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c
index fe4d9ff93a7e..b661c5c2870a 100644
--- a/arch/arm/mach-keystone/keystone.c
+++ b/arch/arm/mach-keystone/keystone.c
@@ -49,7 +49,7 @@ static const char *keystone_match[] __initconst = {
NULL,
};
-void keystone_restart(char mode, const char *cmd)
+void keystone_restart(enum reboot_mode mode, const char *cmd)
{
u32 val;
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 627fa7e41fba..3eed0006d189 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -62,7 +62,7 @@ config SOC_OMAP5
select HAVE_SMP
select COMMON_CLK
select HAVE_ARM_ARCH_TIMER
- select ARM_ERRATA_798181
+ select ARM_ERRATA_798181 if SMP
config SOC_AM33XX
bool "AM33XX support"
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index e5fbfed69aa2..be5d005ebad2 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -15,6 +15,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/irqdomain.h>
+#include <linux/clk.h>
#include <asm/mach/arch.h>
@@ -35,6 +36,21 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
{ }
};
+/*
+ * Create alias for USB host PHY clock.
+ * Remove this when clock phandle can be provided via DT
+ */
+static void __init legacy_init_ehci_clk(char *clkname)
+{
+ int ret;
+
+ ret = clk_add_alias("main_clk", NULL, clkname, NULL);
+ if (ret) {
+ pr_err("%s:Failed to add main_clk alias to %s :%d\n",
+ __func__, clkname, ret);
+ }
+}
+
static void __init omap_generic_init(void)
{
omap_sdrc_init(NULL, NULL);
@@ -45,10 +61,15 @@ static void __init omap_generic_init(void)
* HACK: call display setup code for selected boards to enable omapdss.
* This will be removed when omapdss supports DT.
*/
- if (of_machine_is_compatible("ti,omap4-panda"))
+ if (of_machine_is_compatible("ti,omap4-panda")) {
omap4_panda_display_init_of();
+ legacy_init_ehci_clk("auxclk3_ck");
+
+ }
else if (of_machine_is_compatible("ti,omap4-sdp"))
omap_4430sdp_display_init_of();
+ else if (of_machine_is_compatible("ti,omap5-uevm"))
+ legacy_init_ehci_clk("auxclk1_ck");
}
#ifdef CONFIG_SOC_OMAP2420
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index f6726bb4eb95..3a3362fa793e 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -477,16 +477,24 @@ static int em_x270_usb_hub_init(void)
/* USB Hub power-on and reset */
gpio_direction_output(usb_hub_reset, 1);
gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
- regulator_enable(em_x270_usb_ldo);
+ err = regulator_enable(em_x270_usb_ldo);
+ if (err)
+ goto err_free_rst_gpio;
+
gpio_set_value(usb_hub_reset, 0);
gpio_set_value(usb_hub_reset, 1);
regulator_disable(em_x270_usb_ldo);
- regulator_enable(em_x270_usb_ldo);
+ err = regulator_enable(em_x270_usb_ldo);
+ if (err)
+ goto err_free_rst_gpio;
+
gpio_set_value(usb_hub_reset, 0);
gpio_set_value(GPIO9_USB_VBUS_EN, 1);
return 0;
+err_free_rst_gpio:
+ gpio_free(usb_hub_reset);
err_free_vbus_gpio:
gpio_free(GPIO9_USB_VBUS_EN);
err_free_usb_ldo:
@@ -592,7 +600,7 @@ err_irq:
return err;
}
-static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
+static int em_x270_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
@@ -600,10 +608,11 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
- regulator_enable(em_x270_sdio_ldo);
+ return regulator_enable(em_x270_sdio_ldo);
} else {
regulator_disable(em_x270_sdio_ldo);
}
+ return 0;
}
static void em_x270_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index d2c652318376..dd70343c8708 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -408,7 +408,7 @@ static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_in
return err;
}
-static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
+static int mainstone_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
@@ -420,6 +420,7 @@ static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
printk(KERN_DEBUG "%s: off\n", __func__);
MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
}
+ return 0;
}
static void mainstone_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index fb7f1d1627dc..13e5b00eae90 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -335,7 +335,7 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
return err;
}
-static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
+static int pcm990_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data *p_d = dev->platform_data;
u8 val;
@@ -348,6 +348,7 @@ static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
val &= ~PCM990_CTRL_MMC2PWR;
pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5);
+ return 0;
}
static void pcm990_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 711d37e26bd8..aedf053a1de5 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -258,7 +258,7 @@ err_free_2:
return err;
}
-static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
+static int poodle_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
@@ -270,6 +270,8 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
gpio_set_value(POODLE_GPIO_SD_PWR, 0);
}
+
+ return 0;
}
static void poodle_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 2125df0444e7..4c29173026e8 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -598,7 +598,7 @@ static inline void spitz_spi_init(void) {}
* NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to
* give the card a chance to fully insert/eject.
*/
-static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
+static int spitz_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
@@ -606,6 +606,8 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V);
else
spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0);
+
+ return 0;
}
static struct pxamci_platform_data spitz_mci_platform_data = {
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 88fde43c948c..62aea3e835f3 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -734,9 +734,10 @@ static int stargate2_mci_init(struct device *dev,
*
* Very simple control. Either it is on or off and is controlled by
* a gpio pin */
-static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
+static int stargate2_mci_setpower(struct device *dev, unsigned int vdd)
{
gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
+ return 0;
}
static void stargate2_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
index 34fffdf6fc1d..564553694b54 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c
@@ -119,66 +119,101 @@ static struct clk init_clocks_off[] = {
}
};
-static struct clk init_clocks[] = {
- {
- .name = "lcd",
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_LCDC,
- }, {
- .name = "gpio",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_GPIO,
- }, {
- .name = "usb-host",
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_USBH,
- }, {
- .name = "usb-device",
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_USBD,
- }, {
- .name = "timers",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_PWMT,
- }, {
- .name = "uart",
- .devname = "s3c2410-uart.0",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART0,
- }, {
- .name = "uart",
- .devname = "s3c2410-uart.1",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART1,
- }, {
- .name = "uart",
- .devname = "s3c2410-uart.2",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART2,
- }, {
- .name = "rtc",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_RTC,
- }, {
- .name = "watchdog",
- .parent = &clk_p,
- .ctrlbit = 0,
- }, {
- .name = "usb-bus-host",
- .parent = &clk_usb_bus,
- }, {
- .name = "usb-bus-gadget",
- .parent = &clk_usb_bus,
- },
+static struct clk clk_lcd = {
+ .name = "lcd",
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_LCDC,
+};
+
+static struct clk clk_gpio = {
+ .name = "gpio",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_GPIO,
+};
+
+static struct clk clk_usb_host = {
+ .name = "usb-host",
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_USBH,
+};
+
+static struct clk clk_usb_device = {
+ .name = "usb-device",
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_USBD,
+};
+
+static struct clk clk_timers = {
+ .name = "timers",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_PWMT,
+};
+
+struct clk s3c24xx_clk_uart0 = {
+ .name = "uart",
+ .devname = "s3c2410-uart.0",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART0,
+};
+
+struct clk s3c24xx_clk_uart1 = {
+ .name = "uart",
+ .devname = "s3c2410-uart.1",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART1,
+};
+
+struct clk s3c24xx_clk_uart2 = {
+ .name = "uart",
+ .devname = "s3c2410-uart.2",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART2,
+};
+
+static struct clk clk_rtc = {
+ .name = "rtc",
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_RTC,
+};
+
+static struct clk clk_watchdog = {
+ .name = "watchdog",
+ .parent = &clk_p,
+ .ctrlbit = 0,
+};
+
+static struct clk clk_usb_bus_host = {
+ .name = "usb-bus-host",
+ .parent = &clk_usb_bus,
+};
+
+static struct clk clk_usb_bus_gadget = {
+ .name = "usb-bus-gadget",
+ .parent = &clk_usb_bus,
+};
+
+static struct clk *init_clocks[] = {
+ &clk_lcd,
+ &clk_gpio,
+ &clk_usb_host,
+ &clk_usb_device,
+ &clk_timers,
+ &s3c24xx_clk_uart0,
+ &s3c24xx_clk_uart1,
+ &s3c24xx_clk_uart2,
+ &clk_rtc,
+ &clk_watchdog,
+ &clk_usb_bus_host,
+ &clk_usb_bus_gadget,
};
/* s3c2410_baseclk_add()
@@ -195,7 +230,6 @@ int __init s3c2410_baseclk_add(void)
{
unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
- struct clk *clkp;
struct clk *xtal;
int ret;
int ptr;
@@ -207,8 +241,9 @@ int __init s3c2410_baseclk_add(void)
/* register clocks from clock array */
- clkp = init_clocks;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) {
+ struct clk *clkp = init_clocks[ptr];
+
/* ensure that we note the clock state */
clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c
index 1069b5680826..aaf006d1d6dc 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c
@@ -166,6 +166,9 @@ static struct clk_lookup s3c2440_clk_lookup[] = {
CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
+ CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0),
+ CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1),
+ CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2),
CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll),
};
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index d04e3bfe1918..835833e3c4f8 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -11,8 +11,9 @@ menuconfig ARCH_STI
select HAVE_SMP
select HAVE_ARM_SCU if SMP
select ARCH_REQUIRE_GPIOLIB
- select ARM_ERRATA_720789
select ARM_ERRATA_754322
+ select ARM_ERRATA_764369
+ select ARM_ERRATA_775420
select PL310_ERRATA_753970 if CACHE_PL310
select PL310_ERRATA_769419 if CACHE_PL310
help
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 5b799c29886e..5f252569c689 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -91,7 +91,7 @@ static void __init zynq_map_io(void)
zynq_scu_map_io();
}
-static void zynq_system_reset(char mode, const char *cmd)
+static void zynq_system_reset(enum reboot_mode mode, const char *cmd)
{
zynq_slcr_system_reset();
}
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 3dc5cbea86cc..a5b5ff6e68d2 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -29,6 +29,13 @@ config PLAT_S5P
help
Base platform code for Samsung's S5P series SoC.
+config SAMSUNG_PM
+ bool
+ depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || S5P_PM)
+ default y
+ help
+ Base platform power management code for samsung code
+
if PLAT_SAMSUNG
# boot configurations
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 98d07d8fc7a7..199bbe304d02 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -51,7 +51,7 @@ obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o
# PM support
-obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_SAMSUNG_PM) += pm.o
obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o
obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index a62753dc15ba..df45d6edc98d 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -83,6 +83,11 @@ extern struct clk clk_ext;
extern struct clksrc_clk clk_epllref;
extern struct clksrc_clk clk_esysclk;
+/* S3C24XX UART clocks */
+extern struct clk s3c24xx_clk_uart0;
+extern struct clk s3c24xx_clk_uart1;
+extern struct clk s3c24xx_clk_uart2;
+
/* S3C64XX specific clocks */
extern struct clk clk_h2;
extern struct clk clk_27m;
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index 5d47ca35cabd..6bc1a8f471e3 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -19,7 +19,7 @@
struct device;
-#ifdef CONFIG_PM
+#ifdef CONFIG_SAMSUNG_PM
extern __init int s3c_pm_init(void);
extern __init int s3c64xx_pm_init(void);
@@ -58,8 +58,6 @@ extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */
/* from sleep.S */
-extern void s3c_cpu_resume(void);
-
extern int s3c2410_cpu_suspend(unsigned long);
/* sleep save info */
@@ -106,12 +104,14 @@ extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
-#ifdef CONFIG_PM
+#ifdef CONFIG_SAMSUNG_PM
extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
+extern void s3c_cpu_resume(void);
#else
#define s3c_irq_wake NULL
#define s3c_irqext_wake NULL
+#define s3c_cpu_resume NULL
#endif
/* PM debug functions */
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index ea3613642451..d0c23010b693 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -80,7 +80,7 @@ unsigned char pm_uart_udivslot;
#ifdef CONFIG_SAMSUNG_PM_DEBUG
-static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+static struct pm_uart_save uart_save;
static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
{
@@ -101,11 +101,7 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
static void s3c_pm_save_uarts(void)
{
- struct pm_uart_save *save = uart_save;
- unsigned int uart;
-
- for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
- s3c_pm_save_uart(uart, save);
+ s3c_pm_save_uart(CONFIG_DEBUG_S3C_UART, &uart_save);
}
static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
@@ -126,11 +122,7 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
static void s3c_pm_restore_uarts(void)
{
- struct pm_uart_save *save = uart_save;
- unsigned int uart;
-
- for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
- s3c_pm_restore_uart(uart, save);
+ s3c_pm_restore_uart(CONFIG_DEBUG_S3C_UART, &uart_save);
}
#else
static void s3c_pm_save_uarts(void) { }