[ARM] 3426/1: ARM: OMAP: 1/8 Update clock framework

Patch from Tony Lindgren

Update OMAP clock framework from linux-omap tree.
The highlights of the patch are:

- Add support for omap730 clocks by Andrzej Zaborowski
- Fix compile warnings by Dirk Behme
- Add support for using dev id by Tony Lindgren and Komal Shah
- Move memory timings and PRCM into separate files by Tony Lindgren

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 files changed, 466 insertions, 181 deletions

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 75110ba10424..619db18144ea 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -345,7 +345,7 @@ static unsigned calc_ext_dsor(unsigned long rate)
 	 */
 	for (dsor = 2; dsor < 96; ++dsor) {
 		if ((dsor & 1) && dsor > 8)
-		  	continue;
+			continue;
 		if (rate >= 96000000 / dsor)
 			break;
 	}
@@ -687,6 +687,11 @@ int __init omap1_clk_init(void)
 			clk_register(*clkp);
 			continue;
 		}
+
+		if (((*clkp)->flags &CLOCK_IN_OMAP310) && cpu_is_omap310()) {
+			clk_register(*clkp);
+			continue;
+		}
 	}
 
 	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
@@ -784,7 +789,7 @@ int __init omap1_clk_init(void)
 	clk_enable(&armxor_ck.clk);
 	clk_enable(&armtim_ck.clk); /* This should be done by timer code */
 
-	if (cpu_is_omap1510())
+	if (cpu_is_omap15xx())
 		clk_enable(&arm_gpio_ck);
 
 	return 0;
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 4f18d1b94449..b7c68819c4e7 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -151,7 +151,7 @@ static struct clk ck_ref = {
 	.name		= "ck_ref",
 	.rate		= 12000000,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  ALWAYS_ENABLED,
+			  CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
 	.enable		= &omap1_clk_enable_generic,
 	.disable	= &omap1_clk_disable_generic,
 };
@@ -160,7 +160,7 @@ static struct clk ck_dpll1 = {
 	.name		= "ck_dpll1",
 	.parent		= &ck_ref,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_PROPAGATES | ALWAYS_ENABLED,
+			  CLOCK_IN_OMAP310 | RATE_PROPAGATES | ALWAYS_ENABLED,
 	.enable		= &omap1_clk_enable_generic,
 	.disable	= &omap1_clk_disable_generic,
 };
@@ -183,7 +183,8 @@ static struct clk arm_ck = {
 	.name		= "arm_ck",
 	.parent		= &ck_dpll1,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED,
+			  CLOCK_IN_OMAP310 | RATE_CKCTL | RATE_PROPAGATES |
+			  ALWAYS_ENABLED,
 	.rate_offset	= CKCTL_ARMDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
 	.enable		= &omap1_clk_enable_generic,
@@ -195,7 +196,8 @@ static struct arm_idlect1_clk armper_ck = {
 		.name		= "armper_ck",
 		.parent		= &ck_dpll1,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  RATE_CKCTL | CLOCK_IDLE_CONTROL,
+				  CLOCK_IN_OMAP310 | RATE_CKCTL |
+				  CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_PERCK,
 		.rate_offset	= CKCTL_PERDIV_OFFSET,
@@ -209,7 +211,7 @@ static struct arm_idlect1_clk armper_ck = {
 static struct clk arm_gpio_ck = {
 	.name		= "arm_gpio_ck",
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310,
 	.enable_reg	= (void __iomem *)ARM_IDLECT2,
 	.enable_bit	= EN_GPIOCK,
 	.recalc		= &followparent_recalc,
@@ -222,7 +224,7 @@ static struct arm_idlect1_clk armxor_ck = {
 		.name		= "armxor_ck",
 		.parent		= &ck_ref,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IDLE_CONTROL,
+				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_XORPCK,
 		.recalc		= &followparent_recalc,
@@ -237,7 +239,7 @@ static struct arm_idlect1_clk armtim_ck = {
 		.name		= "armtim_ck",
 		.parent		= &ck_ref,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IDLE_CONTROL,
+				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_TIMCK,
 		.recalc		= &followparent_recalc,
@@ -252,7 +254,7 @@ static struct arm_idlect1_clk armwdt_ck = {
 		.name		= "armwdt_ck",
 		.parent		= &ck_ref,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IDLE_CONTROL,
+				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_WDTCK,
 		.recalc		= &omap1_watchdog_recalc,
@@ -344,9 +346,9 @@ static struct arm_idlect1_clk tc_ck = {
 		.name		= "tc_ck",
 		.parent		= &ck_dpll1,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IN_OMAP730 | RATE_CKCTL |
-				  RATE_PROPAGATES | ALWAYS_ENABLED |
-				  CLOCK_IDLE_CONTROL,
+				  CLOCK_IN_OMAP730 | CLOCK_IN_OMAP310 |
+				  RATE_CKCTL | RATE_PROPAGATES |
+				  ALWAYS_ENABLED | CLOCK_IDLE_CONTROL,
 		.rate_offset	= CKCTL_TCDIV_OFFSET,
 		.recalc		= &omap1_ckctl_recalc,
 		.enable		= &omap1_clk_enable_generic,
@@ -358,7 +360,8 @@ static struct arm_idlect1_clk tc_ck = {
 static struct clk arminth_ck1510 = {
 	.name		= "arminth_ck",
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
+			  ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 	/* Note: On 1510 the frequency follows TC_CK
 	 *
@@ -372,7 +375,8 @@ static struct clk tipb_ck = {
 	/* No-idle controlled by "tc_ck" */
 	.name		= "tibp_ck",
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
+			  ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 	.enable		= &omap1_clk_enable_generic,
 	.disable	= &omap1_clk_disable_generic,
@@ -417,7 +421,7 @@ static struct clk dma_ck = {
 	.name		= "dma_ck",
 	.parent		= &tc_ck.clk,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  ALWAYS_ENABLED,
+			  CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 	.enable		= &omap1_clk_enable_generic,
 	.disable	= &omap1_clk_disable_generic,
@@ -437,7 +441,7 @@ static struct arm_idlect1_clk api_ck = {
 		.name		= "api_ck",
 		.parent		= &tc_ck.clk,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IDLE_CONTROL,
+				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_APICK,
 		.recalc		= &followparent_recalc,
@@ -451,7 +455,8 @@ static struct arm_idlect1_clk lb_ck = {
 	.clk = {
 		.name		= "lb_ck",
 		.parent		= &tc_ck.clk,
-		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IDLE_CONTROL,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
+				  CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_LBCK,
 		.recalc		= &followparent_recalc,
@@ -495,8 +500,8 @@ static struct arm_idlect1_clk lcd_ck_1510 = {
 	.clk = {
 		.name		= "lcd_ck",
 		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IN_OMAP1510 | RATE_CKCTL |
-				  CLOCK_IDLE_CONTROL,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
+				  RATE_CKCTL | CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_LCDCK,
 		.rate_offset	= CKCTL_LCDDIV_OFFSET,
@@ -512,8 +517,9 @@ static struct clk uart1_1510 = {
 	/* Direct from ULPD, no real parent */
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT |
-			  ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
+			  ENABLE_REG_32BIT | ALWAYS_ENABLED |
+			  CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
@@ -544,8 +550,8 @@ static struct clk uart2_ck = {
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  ENABLE_REG_32BIT | ALWAYS_ENABLED |
-			  CLOCK_NO_IDLE_PARENT,
+			  CLOCK_IN_OMAP310 | ENABLE_REG_32BIT |
+			  ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
@@ -559,8 +565,9 @@ static struct clk uart3_1510 = {
 	/* Direct from ULPD, no real parent */
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT |
-			  ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
+			  ENABLE_REG_32BIT | ALWAYS_ENABLED |
+			  CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
@@ -590,7 +597,7 @@ static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
 	/* Direct from ULPD, no parent */
 	.rate		= 6000000,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT,
+			  CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT,
 	.enable_reg	= (void __iomem *)ULPD_CLOCK_CTRL,
 	.enable_bit	= USB_MCLK_EN_BIT,
 	.enable		= &omap1_clk_enable_generic,
@@ -601,7 +608,7 @@ static struct clk usb_hhc_ck1510 = {
 	.name		= "usb_hhc_ck",
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
-	.flags		= CLOCK_IN_OMAP1510 |
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
 			  RATE_FIXED | ENABLE_REG_32BIT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 	.enable_bit	= USB_HOST_HHC_UHOST_EN,
@@ -637,7 +644,9 @@ static struct clk mclk_1510 = {
 	.name		= "mclk",
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | RATE_FIXED,
+ 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
+ 	.enable_reg	= (void __iomem *)SOFT_REQ_REG,
+ 	.enable_bit	= 6,
 	.enable		= &omap1_clk_enable_generic,
 	.disable	= &omap1_clk_disable_generic,
 };
@@ -659,7 +668,7 @@ static struct clk bclk_1510 = {
 	.name		= "bclk",
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | RATE_FIXED,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
 	.enable		= &omap1_clk_enable_generic,
 	.disable	= &omap1_clk_disable_generic,
 };
@@ -678,12 +687,14 @@ static struct clk bclk_16xx = {
 };
 
 static struct clk mmc1_ck = {
-	.name		= "mmc1_ck",
+	.name		= "mmc_ck",
+	.id		= 1,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+			  CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT |
+			  CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 	.enable_bit	= 23,
 	.enable		= &omap1_clk_enable_generic,
@@ -691,7 +702,8 @@ static struct clk mmc1_ck = {
 };
 
 static struct clk mmc2_ck = {
-	.name		= "mmc2_ck",
+	.name		= "mmc_ck",
+	.id		= 2,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
@@ -706,7 +718,7 @@ static struct clk mmc2_ck = {
 static struct clk virtual_ck_mpu = {
 	.name		= "mpu",
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  VIRTUAL_CLOCK | ALWAYS_ENABLED,
+			  CLOCK_IN_OMAP310 | VIRTUAL_CLOCK | ALWAYS_ENABLED,
 	.parent		= &arm_ck, /* Is smarter alias for */
 	.recalc		= &followparent_recalc,
 	.set_rate	= &omap1_select_table_rate,
@@ -715,6 +727,20 @@ static struct clk virtual_ck_mpu = {
 	.disable	= &omap1_clk_disable_generic,
 };
 
+/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
+remains active during MPU idle whenever this is enabled */
+static struct clk i2c_fck = {
+	.name		= "i2c_fck",
+	.id		= 1,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
+			  ALWAYS_ENABLED,
+	.parent		= &armxor_ck.clk,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable_generic,
+	.disable	= &omap1_clk_disable_generic,
+};
+
 static struct clk * onchip_clks[] = {
 	/* non-ULPD clocks */
 	&ck_ref,
@@ -763,6 +789,7 @@ static struct clk * onchip_clks[] = {
 	&mmc2_ck,
 	/* Virtual clocks */
 	&virtual_ck_mpu,
+	&i2c_fck,
 };
 
 #endif
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 180f675c9064..72eb4bf571ac 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -28,14 +28,14 @@
 
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
-#include <asm/arch/prcm.h>
 
+#include "prcm-regs.h"
+#include "memory.h"
 #include "clock.h"
 
 //#define DOWN_VARIABLE_DPLL 1			/* Experimental */
 
 static struct prcm_config *curr_prcm_set;
-static struct memory_timings mem_timings;
 static u32 curr_perf_level = PRCM_FULL_SPEED;
 
 /*-------------------------------------------------------------------------
@@ -54,11 +54,13 @@ static void omap2_sys_clk_recalc(struct clk * clk)
 
 static u32 omap2_get_dpll_rate(struct clk * tclk)
 {
-	int dpll_clk, dpll_mult, dpll_div, amult;
+	long long dpll_clk;
+	int dpll_mult, dpll_div, amult;
 
 	dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff;	/* 10 bits */
 	dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f;	/* 4 bits */
-	dpll_clk = (tclk->parent->rate * dpll_mult) / (dpll_div + 1);
+	dpll_clk = (long long)tclk->parent->rate * dpll_mult;
+	do_div(dpll_clk, dpll_div + 1);
 	amult = CM_CLKSEL2_PLL & 0x3;
 	dpll_clk *= amult;
 
@@ -385,75 +387,23 @@ static u32 omap2_dll_force_needed(void)
 		return 0;
 }
 
-static void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
-{
-	unsigned long dll_cnt;
-	u32 fast_dll = 0;
-
-	mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
-
-	/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
-	 * In the case of 2422, its ok to use CS1 instead of CS0.
-	 */
-
-#if 0	/* FIXME: Enable after 24xx cpu detection works */
-	ctype = get_cpu_type();
-	if (cpu_is_omap2422())
-		mem_timings.base_cs = 1;
-	else
-#endif
-		mem_timings.base_cs = 0;
-
-	if (mem_timings.m_type != M_DDR)
-		return;
-
-	/* With DDR we need to determine the low frequency DLL value */
-	if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL))
-		mem_timings.dll_mode = M_UNLOCK;
-	else
-		mem_timings.dll_mode = M_LOCK;
-
-	if (mem_timings.base_cs == 0) {
-		fast_dll = SDRC_DLLA_CTRL;
-		dll_cnt = SDRC_DLLA_STATUS & 0xff00;
-	} else {
-		fast_dll = SDRC_DLLB_CTRL;
-		dll_cnt = SDRC_DLLB_STATUS & 0xff00;
-	}
-	if (force_lock_to_unlock_mode) {
-		fast_dll &= ~0xff00;
-		fast_dll |= dll_cnt;		/* Current lock mode */
-	}
-	mem_timings.fast_dll_ctrl = fast_dll;
-
-	/* No disruptions, DDR will be offline & C-ABI not followed */
-	omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl,
-			    mem_timings.fast_dll_ctrl,
-			    mem_timings.base_cs,
-			    force_lock_to_unlock_mode);
-	mem_timings.slow_dll_ctrl &= 0xff00;	/* Keep lock value */
-
-	/* Turn status into unlock ctrl */
-	mem_timings.slow_dll_ctrl |=
-		((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
-
-	/* 90 degree phase for anything below 133Mhz */
-	mem_timings.slow_dll_ctrl |= (1 << 1);
-}
-
 static u32 omap2_reprogram_sdrc(u32 level, u32 force)
 {
+	u32 slow_dll_ctrl, fast_dll_ctrl, m_type;
 	u32 prev = curr_perf_level, flags;
 
 	if ((curr_perf_level == level) && !force)
 		return prev;
 
+	m_type = omap2_memory_get_type();
+	slow_dll_ctrl = omap2_memory_get_slow_dll_ctrl();
+	fast_dll_ctrl = omap2_memory_get_fast_dll_ctrl();
+
 	if (level == PRCM_HALF_SPEED) {
 		local_irq_save(flags);
 		PRCM_VOLTSETUP = 0xffff;
 		omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED,
-					  mem_timings.slow_dll_ctrl,
-					  mem_timings.m_type);
+					  slow_dll_ctrl, m_type);
 		curr_perf_level = PRCM_HALF_SPEED;
 		local_irq_restore(flags);
 	}
@@ -461,8 +411,7 @@ static u32 omap2_reprogram_sdrc(u32 level, u32 force)
 		local_irq_save(flags);
 		PRCM_VOLTSETUP = 0xffff;
 		omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED,
-					  mem_timings.fast_dll_ctrl,
-					  mem_timings.m_type);
+					  fast_dll_ctrl, m_type);
 		curr_perf_level = PRCM_FULL_SPEED;
 		local_irq_restore(flags);
 	}
@@ -650,7 +599,7 @@ static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask,
 		case 13:				/* dss2 */
 			mask = 0x1; break;
 		case 25:				/* usb */
-			mask = 0xf; break;
+			mask = 0x7; break;
 		}
 	}
 
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 6cab20b1d3c1..6c78d471fab7 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -33,20 +33,6 @@ static u32 omap2_clksel_get_divisor(struct clk *clk);
 #define RATE_IN_242X	(1 << 0)
 #define RATE_IN_243X	(1 << 1)
 
-/* Memory timings */
-#define M_DDR		1
-#define M_LOCK_CTRL	(1 << 2)
-#define M_UNLOCK	0
-#define M_LOCK		1
-
-struct memory_timings {
-	u32 m_type;		/* ddr = 1, sdr = 0 */
-	u32 dll_mode;		/* use lock mode = 1, unlock mode = 0 */
-	u32 slow_dll_ctrl;	/* unlock mode, dll value for slow speed */
-	u32 fast_dll_ctrl;	/* unlock mode, dll value for fast speed */
-	u32 base_cs;		/* base chip select to use for calculations */
-};
-
 /* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
  * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
  * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
@@ -731,6 +717,16 @@ static struct clk sys_clkout2 = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
+static struct clk emul_ck = {
+	.name		= "emul_ck",
+	.parent		= &func_54m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&PRCM_CLKEMUL_CTRL,
+	.enable_bit	= 0,
+	.recalc		= &omap2_propagate_rate,
+
+};
+
 /*
  * MPU clock domain
  *	Clocks:
@@ -1702,7 +1698,8 @@ static struct clk hdq_fck = {
 };
 
 static struct clk i2c2_ick = {
-	.name		= "i2c2_ick",
+	.name		= "i2c_ick",
+	.id		= 2,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
@@ -1711,7 +1708,8 @@ static struct clk i2c2_ick = {
 };
 
 static struct clk i2c2_fck = {
-	.name		= "i2c2_fck",
+	.name		= "i2c_fck",
+	.id		= 2,
 	.parent		= &func_12m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
@@ -1729,7 +1727,8 @@ static struct clk i2chs2_fck = {
 };
 
 static struct clk i2c1_ick = {
-	.name		= "i2c1_ick",
+	.name		= "i2c_ick",
+	.id		= 1,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
@@ -1738,7 +1737,8 @@ static struct clk i2c1_ick = {
 };
 
 static struct clk i2c1_fck = {
-	.name		= "i2c1_fck",
+	.name		= "i2c_fck",
+	.id		= 1,
 	.parent		= &func_12m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
@@ -1971,6 +1971,7 @@ static struct clk *onchip_clks[] = {
 	&wdt1_osc_ck,
 	&sys_clkout,
 	&sys_clkout2,
+	&emul_ck,
 	/* mpu domain clocks */
 	&mpu_ck,
 	/* dsp domain clocks */
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
new file mode 100644
index 000000000000..1d925d69fc35
--- /dev/null
+++ b/arch/arm/mach-omap2/memory.c
@@ -0,0 +1,102 @@
+/*
+ * linux/arch/arm/mach-omap2/memory.c
+ *
+ * Memory timing related functions for OMAP24XX
+ *
+ * Copyright (C) 2005 Texas Instruments Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
+
+#include "prcm-regs.h"
+#include "memory.h"
+
+static struct memory_timings mem_timings;
+
+u32 omap2_memory_get_slow_dll_ctrl(void)
+{
+	return mem_timings.slow_dll_ctrl;
+}
+
+u32 omap2_memory_get_fast_dll_ctrl(void)
+{
+	return mem_timings.fast_dll_ctrl;
+}
+
+u32 omap2_memory_get_type(void)
+{
+	return mem_timings.m_type;
+}
+
+void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
+{
+	unsigned long dll_cnt;
+	u32 fast_dll = 0;
+
+	mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
+
+	/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
+	 * In the case of 2422, its ok to use CS1 instead of CS0.
+	 */
+	if (cpu_is_omap2422())
+		mem_timings.base_cs = 1;
+	else
+		mem_timings.base_cs = 0;
+
+	if (mem_timings.m_type != M_DDR)
+		return;
+
+	/* With DDR we need to determine the low frequency DLL value */
+	if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL))
+		mem_timings.dll_mode = M_UNLOCK;
+	else
+		mem_timings.dll_mode = M_LOCK;
+
+	if (mem_timings.base_cs == 0) {
+		fast_dll = SDRC_DLLA_CTRL;
+		dll_cnt = SDRC_DLLA_STATUS & 0xff00;
+	} else {
+		fast_dll = SDRC_DLLB_CTRL;
+		dll_cnt = SDRC_DLLB_STATUS & 0xff00;
+	}
+	if (force_lock_to_unlock_mode) {
+		fast_dll &= ~0xff00;
+		fast_dll |= dll_cnt;		/* Current lock mode */
+	}
+	/* set fast timings with DLL filter disabled */
+	mem_timings.fast_dll_ctrl = (fast_dll | (3 << 8));
+
+	/* No disruptions, DDR will be offline & C-ABI not followed */
+	omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl,
+			    mem_timings.fast_dll_ctrl,
+			    mem_timings.base_cs,
+			    force_lock_to_unlock_mode);
+	mem_timings.slow_dll_ctrl &= 0xff00;	/* Keep lock value */
+
+	/* Turn status into unlock ctrl */
+	mem_timings.slow_dll_ctrl |=
+		((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
+
+	/* 90 degree phase for anything below 133Mhz + disable DLL filter */
+	mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
+}
diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h
new file mode 100644
index 000000000000..d212eea83a05
--- /dev/null
+++ b/arch/arm/mach-omap2/memory.h
@@ -0,0 +1,34 @@
+/*
+ * linux/arch/arm/mach-omap2/memory.h
+ *
+ * Interface for memory timing related functions for OMAP24XX
+ *
+ * Copyright (C) 2005 Texas Instruments Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* Memory timings */
+#define M_DDR		1
+#define M_LOCK_CTRL	(1 << 2)
+#define M_UNLOCK	0
+#define M_LOCK		1
+
+struct memory_timings {
+	u32 m_type;		/* ddr = 1, sdr = 0 */
+	u32 dll_mode;		/* use lock mode = 1, unlock mode = 0 */
+	u32 slow_dll_ctrl;	/* unlock mode, dll value for slow speed */
+	u32 fast_dll_ctrl;	/* unlock mode, dll value for fast speed */
+	u32 base_cs;		/* base chip select to use for calculations */
+};
+
+extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode);
+extern u32 omap2_memory_get_slow_dll_ctrl(void);
+extern u32 omap2_memory_get_fast_dll_ctrl(void);
+extern u32 omap2_memory_get_type(void);
diff --git a/arch/arm/mach-omap2/prcm.h b/arch/arm/mach-omap2/prcm-regs.h
index 2eb89b936c83..22ac7be4f782 100644
--- a/arch/arm/mach-omap2/prcm.h
+++ b/arch/arm/mach-omap2/prcm-regs.h
@@ -1,5 +1,7 @@
 /*
- * prcm.h - Access definations for use in OMAP24XX clock and power management
+ * linux/arch/arm/mach-omap2/prcm-reg.h
+ *
+ * OMAP24XX Power Reset and Clock Management (PRCM) registers
  *
  * Copyright (C) 2005 Texas Instruments, Inc.
  *
@@ -18,8 +20,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
 
-#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
-#define __ASM_ARM_ARCH_DPM_PRCM_H
+#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_H
+#define __ARCH_ARM_MACH_OMAP2_PRCM_H
 
 /* SET_PERFORMANCE_LEVEL PARAMETERS */
 #define PRCM_HALF_SPEED 1
@@ -159,54 +161,63 @@
 #define CM_FCLKEN_MDM		PRCM_REG32(0xC00)
 #define CM_ICLKEN_MDM		PRCM_REG32(0xC10)
 #define CM_IDLEST_MDM		PRCM_REG32(0xC20)
+#define CM_AUTOIDLE_MDM		PRCM_REG32(0xC30)
 #define CM_CLKSEL_MDM		PRCM_REG32(0xC40)
-
-/* FIXME: Move to header for 2430 */
-#define DISP_BASE		(OMAP24XX_L4_IO_BASE+0x50000)
+#define CM_CLKSTCTRL_MDM	PRCM_REG32(0xC48)
+#define RM_RSTCTRL_MDM		PRCM_REG32(0xC50)
+#define RM_RSTST_MDM		PRCM_REG32(0xC58)
+#define PM_WKEN_MDM		PRCM_REG32(0xCA0)
+#define PM_WKST_MDM		PRCM_REG32(0xCB0)
+#define PM_WKDEP_MDM		PRCM_REG32(0xCC8)
+#define PM_PWSTCTRL_MDM		PRCM_REG32(0xCE0)
+#define PM_PWSTST_MDM		PRCM_REG32(0xCE4)
+
+#define OMAP24XX_L4_IO_BASE	0x48000000
+
+#define DISP_BASE		(OMAP24XX_L4_IO_BASE + 0x50000)
 #define DISP_REG32(offset)	__REG32(DISP_BASE + (offset))
 
-#define GPMC_BASE		(OMAP24XX_GPMC_BASE)
-#define GPMC_REG32(offset)	__REG32(GPMC_BASE + (offset))
+#define OMAP24XX_GPMC_BASE	(L3_24XX_BASE + 0xa000)
+#define GPMC_REG32(offset)	__REG32(OMAP24XX_GPMC_BASE + (offset))
 
-#define GPT1_BASE		(OMAP24XX_GPT1)
+/* FIXME: Move these to timer code */
+#define GPT1_BASE		(0x48028000)
 #define GPT1_REG32(offset)	__REG32(GPT1_BASE + (offset))
 
 /* Misc sysconfig */
 #define DISPC_SYSCONFIG		DISP_REG32(0x410)
-#define SPI_BASE		(OMAP24XX_L4_IO_BASE+0x98000)
+#define SPI_BASE		(OMAP24XX_L4_IO_BASE + 0x98000)
 #define MCSPI1_SYSCONFIG	__REG32(SPI_BASE + 0x10)
-#define MCSPI2_SYSCONFIG	__REG32(SPI_BASE+0x2000 + 0x10)
-
-//#define DSP_MMU_SYSCONFIG	0x5A000010
-#define CAMERA_MMU_SYSCONFIG	__REG32(DISP_BASE+0x2C10)
-//#define IVA_MMU_SYSCONFIG	0x5D000010
-//#define DSP_DMA_SYSCONFIG	0x00FCC02C
-#define CAMERA_DMA_SYSCONFIG	__REG32(DISP_BASE+0x282C)
-#define SYSTEM_DMA_SYSCONFIG	__REG32(DISP_BASE+0x602C)
+#define MCSPI2_SYSCONFIG	__REG32(SPI_BASE + 0x2000 + 0x10)
+#define MCSPI3_SYSCONFIG	__REG32(OMAP24XX_L4_IO_BASE + 0xb8010)
+
+#define CAMERA_MMU_SYSCONFIG	__REG32(DISP_BASE + 0x2C10)
+#define CAMERA_DMA_SYSCONFIG	__REG32(DISP_BASE + 0x282C)
+#define SYSTEM_DMA_SYSCONFIG	__REG32(DISP_BASE + 0x602C)
 #define GPMC_SYSCONFIG		GPMC_REG32(0x010)
-#define MAILBOXES_SYSCONFIG	__REG32(OMAP24XX_L4_IO_BASE+0x94010)
-#define UART1_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE+0x6A054)
-#define UART2_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE+0x6C054)
-#define UART3_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE+0x6E054)
-//#define IVA_SYSCONFIG		0x5C060010
-#define SDRC_SYSCONFIG		__REG32(OMAP24XX_SDRC_BASE+0x10)
-#define SMS_SYSCONFIG		__REG32(OMAP24XX_SMS_BASE+0x10)
-#define SSI_SYSCONFIG		__REG32(DISP_BASE+0x8010)
-//#define VLYNQ_SYSCONFIG	0x67FFFE10
+#define MAILBOXES_SYSCONFIG	__REG32(OMAP24XX_L4_IO_BASE + 0x94010)
+#define UART1_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE + 0x6A054)
+#define UART2_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE + 0x6C054)
+#define UART3_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE + 0x6E054)
+#define SDRC_SYSCONFIG		__REG32(OMAP24XX_SDRC_BASE + 0x10)
+#define OMAP24XX_SMS_BASE	(L3_24XX_BASE + 0x8000)
+#define SMS_SYSCONFIG		__REG32(OMAP24XX_SMS_BASE + 0x10)
+#define SSI_SYSCONFIG		__REG32(DISP_BASE + 0x8010)
 
 /* rkw - good cannidates for PM_ to start what nm was trying */
-#define OMAP24XX_GPT2		(OMAP24XX_L4_IO_BASE+0x2A000)
-#define OMAP24XX_GPT3		(OMAP24XX_L4_IO_BASE+0x78000)
-#define OMAP24XX_GPT4		(OMAP24XX_L4_IO_BASE+0x7A000)
-#define OMAP24XX_GPT5		(OMAP24XX_L4_IO_BASE+0x7C000)
-#define OMAP24XX_GPT6		(OMAP24XX_L4_IO_BASE+0x7E000)
-#define OMAP24XX_GPT7		(OMAP24XX_L4_IO_BASE+0x80000)
-#define OMAP24XX_GPT8		(OMAP24XX_L4_IO_BASE+0x82000)
-#define OMAP24XX_GPT9		(OMAP24XX_L4_IO_BASE+0x84000)
-#define OMAP24XX_GPT10		(OMAP24XX_L4_IO_BASE+0x86000)
-#define OMAP24XX_GPT11		(OMAP24XX_L4_IO_BASE+0x88000)
-#define OMAP24XX_GPT12		(OMAP24XX_L4_IO_BASE+0x8A000)
-
+#define OMAP24XX_GPT2		(OMAP24XX_L4_IO_BASE + 0x2A000)
+#define OMAP24XX_GPT3		(OMAP24XX_L4_IO_BASE + 0x78000)
+#define OMAP24XX_GPT4		(OMAP24XX_L4_IO_BASE + 0x7A000)
+#define OMAP24XX_GPT5		(OMAP24XX_L4_IO_BASE + 0x7C000)
+#define OMAP24XX_GPT6		(OMAP24XX_L4_IO_BASE + 0x7E000)
+#define OMAP24XX_GPT7		(OMAP24XX_L4_IO_BASE + 0x80000)
+#define OMAP24XX_GPT8		(OMAP24XX_L4_IO_BASE + 0x82000)
+#define OMAP24XX_GPT9		(OMAP24XX_L4_IO_BASE + 0x84000)
+#define OMAP24XX_GPT10		(OMAP24XX_L4_IO_BASE + 0x86000)
+#define OMAP24XX_GPT11		(OMAP24XX_L4_IO_BASE + 0x88000)
+#define OMAP24XX_GPT12		(OMAP24XX_L4_IO_BASE + 0x8A000)
+
+/* FIXME: Move these to timer code */
 #define GPTIMER1_SYSCONFIG	GPT1_REG32(0x010)
 #define GPTIMER2_SYSCONFIG	__REG32(OMAP24XX_GPT2 + 0x10)
 #define GPTIMER3_SYSCONFIG	__REG32(OMAP24XX_GPT3 + 0x10)
@@ -220,12 +231,18 @@
 #define GPTIMER11_SYSCONFIG	__REG32(OMAP24XX_GPT11 + 0x10)
 #define GPTIMER12_SYSCONFIG	__REG32(OMAP24XX_GPT12 + 0x10)
 
-#define GPIOX_BASE(X)		(OMAP24XX_GPIO_BASE+(0x2000*((X)-1)))
+/* FIXME: Move these to gpio code */
+#define OMAP24XX_GPIO_BASE	0x48018000
+#define GPIOX_BASE(X)		(OMAP24XX_GPIO_BASE + (0x2000 * ((X) - 1)))
+
+#define GPIO1_SYSCONFIG		__REG32((GPIOX_BASE(1) + 0x10))
+#define GPIO2_SYSCONFIG		__REG32((GPIOX_BASE(2) + 0x10))
+#define GPIO3_SYSCONFIG		__REG32((GPIOX_BASE(3) + 0x10))
+#define GPIO4_SYSCONFIG		__REG32((GPIOX_BASE(4) + 0x10))
 
-#define GPIO1_SYSCONFIG		__REG32((GPIOX_BASE(1)+0x10))
-#define GPIO2_SYSCONFIG		__REG32((GPIOX_BASE(2)+0x10))
-#define GPIO3_SYSCONFIG		__REG32((GPIOX_BASE(3)+0x10))
-#define GPIO4_SYSCONFIG		__REG32((GPIOX_BASE(4)+0x10))
+#if defined(CONFIG_ARCH_OMAP243X)
+#define GPIO5_SYSCONFIG		__REG32((OMAP24XX_GPIO5_BASE + 0x10))
+#endif
 
 /* GP TIMER 1 */
 #define GPTIMER1_TISTAT		GPT1_REG32(0x014)
@@ -243,15 +260,15 @@
 #define GPTIMER1_TCAR2		GPT1_REG32(0x044)
 
 /* rkw -- base fix up please... */
-#define GPTIMER3_TISR		__REG32(OMAP24XX_L4_IO_BASE+0x78018)
+#define GPTIMER3_TISR		__REG32(OMAP24XX_L4_IO_BASE + 0x78018)
 
 /* SDRC */
-#define SDRC_DLLA_CTRL		__REG32(OMAP24XX_SDRC_BASE+0x060)
-#define SDRC_DLLA_STATUS	__REG32(OMAP24XX_SDRC_BASE+0x064)
-#define SDRC_DLLB_CTRL		__REG32(OMAP24XX_SDRC_BASE+0x068)
-#define SDRC_DLLB_STATUS	__REG32(OMAP24XX_SDRC_BASE+0x06C)
-#define SDRC_POWER		__REG32(OMAP24XX_SDRC_BASE+0x070)
-#define SDRC_MR_0		__REG32(OMAP24XX_SDRC_BASE+0x084)
+#define SDRC_DLLA_CTRL		__REG32(OMAP24XX_SDRC_BASE + 0x060)
+#define SDRC_DLLA_STATUS	__REG32(OMAP24XX_SDRC_BASE + 0x064)
+#define SDRC_DLLB_CTRL		__REG32(OMAP24XX_SDRC_BASE + 0x068)
+#define SDRC_DLLB_STATUS	__REG32(OMAP24XX_SDRC_BASE + 0x06C)
+#define SDRC_POWER		__REG32(OMAP24XX_SDRC_BASE + 0x070)
+#define SDRC_MR_0		__REG32(OMAP24XX_SDRC_BASE + 0x084)
 
 /* GPIO 1 */
 #define GPIO1_BASE		GPIOX_BASE(1)
@@ -278,6 +295,8 @@
 #define GPIO2_DATAIN		GPIO2_REG32(0x038)
 #define GPIO2_OE		GPIO2_REG32(0x034)
 #define GPIO2_DATAOUT		GPIO2_REG32(0x03C)
+#define GPIO2_DEBOUNCENABLE	GPIO2_REG32(0x050)
+#define GPIO2_DEBOUNCINGTIME	GPIO2_REG32(0x054)
 
 /* GPIO 3 */
 #define GPIO3_BASE		GPIOX_BASE(3)
@@ -294,6 +313,8 @@
 #define GPIO3_DATAOUT		GPIO3_REG32(0x03C)
 #define GPIO3_DEBOUNCENABLE	GPIO3_REG32(0x050)
 #define GPIO3_DEBOUNCINGTIME	GPIO3_REG32(0x054)
+#define GPIO3_DEBOUNCENABLE	GPIO3_REG32(0x050)
+#define GPIO3_DEBOUNCINGTIME	GPIO3_REG32(0x054)
 
 /* GPIO 4 */
 #define GPIO4_BASE		GPIOX_BASE(4)
@@ -311,10 +332,26 @@
 #define GPIO4_DEBOUNCENABLE	GPIO4_REG32(0x050)
 #define GPIO4_DEBOUNCINGTIME	GPIO4_REG32(0x054)
 
+#if defined(CONFIG_ARCH_OMAP243X)
+/* GPIO 5 */
+#define GPIO5_REG32(offset)	__REG32((OMAP24XX_GPIO5_BASE + (offset)))
+#define GPIO5_IRQENABLE1	GPIO5_REG32(0x01C)
+#define GPIO5_IRQSTATUS1	GPIO5_REG32(0x018)
+#define GPIO5_IRQENABLE2	GPIO5_REG32(0x02C)
+#define GPIO5_IRQSTATUS2	GPIO5_REG32(0x028)
+#define GPIO5_WAKEUPENABLE	GPIO5_REG32(0x020)
+#define GPIO5_RISINGDETECT	GPIO5_REG32(0x048)
+#define GPIO5_FALLINGDETECT	GPIO5_REG32(0x04C)
+#define GPIO5_DATAIN		GPIO5_REG32(0x038)
+#define GPIO5_OE		GPIO5_REG32(0x034)
+#define GPIO5_DATAOUT		GPIO5_REG32(0x03C)
+#define GPIO5_DEBOUNCENABLE	GPIO5_REG32(0x050)
+#define GPIO5_DEBOUNCINGTIME	GPIO5_REG32(0x054)
+#endif
 
 /* IO CONFIG */
-#define CONTROL_BASE		(OMAP24XX_CTRL_BASE)
-#define CONTROL_REG32(offset)	__REG32(CONTROL_BASE + (offset))
+#define OMAP24XX_CTRL_BASE		(L4_24XX_BASE)
+#define CONTROL_REG32(offset)		__REG32(OMAP24XX_CTRL_BASE + (offset))
 
 #define CONTROL_PADCONF_SPI1_NCS2	CONTROL_REG32(0x104)
 #define CONTROL_PADCONF_SYS_XTALOUT	CONTROL_REG32(0x134)
@@ -322,15 +359,18 @@
 #define CONTROL_PADCONF_MCBSP1_DX	CONTROL_REG32(0x10C)
 #define CONTROL_PADCONF_GPMC_NCS4	CONTROL_REG32(0x090)
 #define CONTROL_PADCONF_DSS_D5		CONTROL_REG32(0x0B8)
-#define CONTROL_PADCONF_DSS_D9		CONTROL_REG32(0x0BC)
+#define CONTROL_PADCONF_DSS_D9		CONTROL_REG32(0x0BC)	/* 2420 */
 #define CONTROL_PADCONF_DSS_D13		CONTROL_REG32(0x0C0)
 #define CONTROL_PADCONF_DSS_VSYNC	CONTROL_REG32(0x0CC)
+#define CONTROL_PADCONF_SYS_NIRQW0	CONTROL_REG32(0x0BC)	/* 2430 */
+#define CONTROL_PADCONF_SSI1_FLAG_TX	CONTROL_REG32(0x108)	/* 2430 */
 
 /* CONTROL */
 #define CONTROL_DEVCONF		CONTROL_REG32(0x274)
+#define CONTROL_DEVCONF1	CONTROL_REG32(0x2E8)
 
 /* INTERRUPT CONTROLLER */
-#define INTC_BASE		(OMAP24XX_L4_IO_BASE+0xfe000)
+#define INTC_BASE		((L4_24XX_BASE) + 0xfe000)
 #define INTC_REG32(offset)	__REG32(INTC_BASE + (offset))
 
 #define INTC1_U_BASE		INTC_REG32(0x000)
@@ -348,10 +388,12 @@
 #define INTC_ISR_CLEAR2		INTC_REG32(0x0D4)
 #define INTC_SIR_IRQ		INTC_REG32(0x040)
 #define INTC_CONTROL		INTC_REG32(0x048)
-#define INTC_ILR11		INTC_REG32(0x12C)
+#define INTC_ILR11		INTC_REG32(0x12C)	/* PRCM on MPU PIC */
+#define INTC_ILR30		INTC_REG32(0x178)
+#define INTC_ILR31		INTC_REG32(0x17C)
 #define INTC_ILR32		INTC_REG32(0x180)
-#define INTC_ILR37		INTC_REG32(0x194)
-#define INTC_SYSCONFIG		INTC_REG32(0x010)
+#define INTC_ILR37		INTC_REG32(0x194)	/* GPIO4 on MPU PIC */
+#define INTC_SYSCONFIG		INTC_REG32(0x010)	/* GPT1 on MPU PIC */
 
 /* RAM FIREWALL */
 #define RAMFW_BASE		(0x68005000)
@@ -373,6 +415,24 @@
 #define GPMC_CONFIG6_0		GPMC_REG32(0x074)
 #define GPMC_CONFIG7_0		GPMC_REG32(0x078)
 
+/* GPMC CS1 */
+#define GPMC_CONFIG1_1		GPMC_REG32(0x090)
+#define GPMC_CONFIG2_1		GPMC_REG32(0x094)
+#define GPMC_CONFIG3_1		GPMC_REG32(0x098)
+#define GPMC_CONFIG4_1		GPMC_REG32(0x09C)
+#define GPMC_CONFIG5_1		GPMC_REG32(0x0a0)
+#define GPMC_CONFIG6_1		GPMC_REG32(0x0a4)
+#define GPMC_CONFIG7_1		GPMC_REG32(0x0a8)
+
+/* GPMC CS3 */
+#define GPMC_CONFIG1_3		GPMC_REG32(0x0F0)
+#define GPMC_CONFIG2_3		GPMC_REG32(0x0F4)
+#define GPMC_CONFIG3_3		GPMC_REG32(0x0F8)
+#define GPMC_CONFIG4_3		GPMC_REG32(0x0FC)
+#define GPMC_CONFIG5_3		GPMC_REG32(0x100)
+#define GPMC_CONFIG6_3		GPMC_REG32(0x104)
+#define GPMC_CONFIG7_3		GPMC_REG32(0x108)
+
 /* DSS */
 #define DSS_CONTROL		DISP_REG32(0x040)
 #define DISPC_CONTROL		DISP_REG32(0x440)
@@ -405,11 +465,15 @@
 #define DISPC_DATA_CYCLE2	DISP_REG32(0x5D8)
 #define DISPC_DATA_CYCLE3	DISP_REG32(0x5DC)
 
-/* Wake up define for board */
-#define GPIO97			(1 << 1)
-#define GPIO88			(1 << 24)
+/* HSUSB Suspend */
+#define HSUSB_CTRL		__REG8(0x480AC001)
+#define USBOTG_POWER		__REG32(0x480AC000)
+
+/* HS MMC */
+#define MMCHS1_SYSCONFIG	__REG32(0x4809C010)
+#define MMCHS2_SYSCONFIG	__REG32(0x480b4010)
 
-#endif /* __ASSEMBLER__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif
 
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
new file mode 100644
index 000000000000..8893479dc7e0
--- /dev/null
+++ b/arch/arm/mach-omap2/prcm.c
@@ -0,0 +1,40 @@
+/*
+ * linux/arch/arm/mach-omap2/prcm.c
+ *
+ * OMAP 24xx Power Reset and Clock Management (PRCM) functions
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Some pieces of code Copyright (C) 2005 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include "prcm-regs.h"
+
+u32 omap_prcm_get_reset_sources(void)
+{
+	return RM_RSTST_WKUP & 0x7f;
+}
+EXPORT_SYMBOL(omap_prcm_get_reset_sources);
+
+/* Resets clock rates and reboots the system. Only called from system.h */
+void omap_prcm_arch_reset(char mode)
+{
+	u32 rate;
+	struct clk *vclk, *sclk;
+
+	vclk = clk_get(NULL, "virt_prcm_set");
+	sclk = clk_get(NULL, "sys_ck");
+	rate = clk_get_rate(sclk);
+	clk_set_rate(vclk, rate);	/* go to bypass for OMAP limitation */
+	RM_RSTCTRL_WKUP |= 2;
+}
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 3c2bfc0efdaf..06485c193ee3 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -21,6 +21,7 @@
 #include <linux/string.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
+#include <linux/platform_device.h>
 
 #include <asm/io.h>
 #include <asm/semaphore.h>
@@ -37,17 +38,37 @@ static struct clk_functions *arch_clock;
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
 
+/*
+ * Returns a clock. Note that we first try to use device id on the bus
+ * and clock name. If this fails, we try to use clock name only.
+ */
 struct clk * clk_get(struct device *dev, const char *id)
 {
 	struct clk *p, *clk = ERR_PTR(-ENOENT);
+	int idno;
+
+	if (dev == NULL || dev->bus != &platform_bus_type)
+		idno = -1;
+	else
+		idno = to_platform_device(dev)->id;
 
 	mutex_lock(&clocks_mutex);
+
+	list_for_each_entry(p, &clocks, node) {
+		if (p->id == idno &&
+		    strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+			clk = p;
+			break;
+		}
+	}
+
 	list_for_each_entry(p, &clocks, node) {
 		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
 			clk = p;
 			break;
 		}
 	}
+
 	mutex_unlock(&clocks_mutex);
 
 	return clk;
@@ -59,6 +80,9 @@ int clk_enable(struct clk *clk)
 	unsigned long flags;
 	int ret = 0;
 
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
 	spin_lock_irqsave(&clockfw_lock, flags);
 	if (arch_clock->clk_enable)
 		ret = arch_clock->clk_enable(clk);
@@ -72,6 +96,9 @@ void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
 
+	if (clk == NULL || IS_ERR(clk))
+		return;
+
 	spin_lock_irqsave(&clockfw_lock, flags);
 	if (arch_clock->clk_disable)
 		arch_clock->clk_disable(clk);
@@ -84,6 +111,9 @@ int clk_get_usecount(struct clk *clk)
 	unsigned long flags;
 	int ret = 0;
 
+	if (clk == NULL || IS_ERR(clk))
+		return 0;
+
 	spin_lock_irqsave(&clockfw_lock, flags);
 	ret = clk->usecount;
 	spin_unlock_irqrestore(&clockfw_lock, flags);
@@ -97,6 +127,9 @@ unsigned long clk_get_rate(struct clk *clk)
 	unsigned long flags;
 	unsigned long ret = 0;
 
+	if (clk == NULL || IS_ERR(clk))
+		return 0;
+
 	spin_lock_irqsave(&clockfw_lock, flags);
 	ret = clk->rate;
 	spin_unlock_irqrestore(&clockfw_lock, flags);
@@ -121,6 +154,9 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 	unsigned long flags;
 	long ret = 0;
 
+	if (clk == NULL || IS_ERR(clk))
+		return ret;
+
 	spin_lock_irqsave(&clockfw_lock, flags);
 	if (arch_clock->clk_round_rate)
 		ret = arch_clock->clk_round_rate(clk, rate);
@@ -133,7 +169,10 @@ EXPORT_SYMBOL(clk_round_rate);
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned long flags;
-	int ret = 0;
+	int ret = -EINVAL;
+
+	if (clk == NULL || IS_ERR(clk))
+		return ret;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
 	if (arch_clock->clk_set_rate)
@@ -147,7 +186,10 @@ EXPORT_SYMBOL(clk_set_rate);
 int clk_set_parent(struct clk *clk, struct clk *parent)
 {
 	unsigned long flags;
-	int ret = 0;
+	int ret = -EINVAL;
+
+	if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
+		return ret;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
 	if (arch_clock->clk_set_parent)
@@ -163,6 +205,9 @@ struct clk *clk_get_parent(struct clk *clk)
 	unsigned long flags;
 	struct clk * ret = NULL;
 
+	if (clk == NULL || IS_ERR(clk))
+		return ret;
+
 	spin_lock_irqsave(&clockfw_lock, flags);
 	if (arch_clock->clk_get_parent)
 		ret = arch_clock->clk_get_parent(clk);
@@ -199,6 +244,9 @@ __setup("mpurate=", omap_clk_setup);
 /* Used for clocks that always have same value as the parent clock */
 void followparent_recalc(struct clk *clk)
 {
+	if (clk == NULL || IS_ERR(clk))
+		return;
+
 	clk->rate = clk->parent->rate;
 }
 
@@ -207,6 +255,9 @@ void propagate_rate(struct clk * tclk)
 {
 	struct clk *clkp;
 
+	if (tclk == NULL || IS_ERR(tclk))
+		return;
+
 	list_for_each_entry(clkp, &clocks, node) {
 		if (likely(clkp->parent != tclk))
 			continue;
@@ -217,6 +268,9 @@ void propagate_rate(struct clk * tclk)
 
 int clk_register(struct clk *clk)
 {
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
 	mutex_lock(&clocks_mutex);
 	list_add(&clk->node, &clocks);
 	if (clk->init)
@@ -229,6 +283,9 @@ EXPORT_SYMBOL(clk_register);
 
 void clk_unregister(struct clk *clk)
 {
+	if (clk == NULL || IS_ERR(clk))
+		return;
+
 	mutex_lock(&clocks_mutex);
 	list_del(&clk->node);
 	mutex_unlock(&clocks_mutex);
@@ -239,6 +296,9 @@ void clk_deny_idle(struct clk *clk)
 {
 	unsigned long flags;
 
+	if (clk == NULL || IS_ERR(clk))
+		return;
+
 	spin_lock_irqsave(&clockfw_lock, flags);
 	if (arch_clock->clk_deny_idle)
 		arch_clock->clk_deny_idle(clk);
@@ -250,6 +310,9 @@ void clk_allow_idle(struct clk *clk)
 {
 	unsigned long flags;
 
+	if (clk == NULL || IS_ERR(clk))
+		return;
+
 	spin_lock_irqsave(&clockfw_lock, flags);
 	if (arch_clock->clk_allow_idle)
 		arch_clock->clk_allow_idle(clk);