Merge tag 'at91-3.5-cleanup' of git://github.com/at91linux/linux-at91 into next/cleanup

Nicolas Ferre <nicolas.ferre@atmel.com> writes: First batch of AT91 cleanup for 3.5 kernel. - The biggest improvement of this series is the ability to compile several AT91 SoCs in one kernel image. For now on it's limited to the DT-enabled boards but we can compile all the core together. - The Kconfig series is stacked before other patches as it is simple and non-intrusive. Its goal is to remove too restrictive dependencies on SoC names. This will allow to add support for newer SoC seamlessly. - Some very "cosmetic" Kconfig changes are also added (entry names, comments, etc.). * tag 'at91-3.5-cleanup' of git://github.com/at91linux/linux-at91: (19 commits) ARM: at91: add defconfig for device tree ARM: at91/dt: do not specify the board any more ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support ARM: at91: add SOC_AT91SAM9 kconfig option to factorise select ARM: at91: pm select memory controler at runtime ARM: at91: move at91_init_leds to board init ARM: at91: do not pin mux the UARTs in init_early ARM: at91: drop at91_set_serial_console ARM: at91: uncompress: autodetect the uart to use ARM: at91: uncompress Store UART address in a variable hwrng: Kconfig: remove dependency for atmel-rng driver Input: Kconfig: remove dependency for atmel_tsadcc driver rtc: Kconfig: remove dependency for AT91 rtc driver ARM: at91/Kconfig: website link for AT91SAM9G20-EK ARM: at91/Kconfig: add AT91SAM9x5 family to AT91_EARLY_DBGU0 entry ARM: at91/Kconfig: add clarifications to AT91SAM9M10G45-EK entry ARM: at91/Kconfig: add comment to at91sam9x5 family entry ARM: at91/Kconfig: change at91sam9g45 entry ARM: at91: change AT91 Kconfig entry comment Also updates the cleanup branch to v3.4-rc3. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
author: Arnd Bergmann <arnd@arndb.de> 2012-04-22 22:22:34 +0200
committer: Arnd Bergmann <arnd@arndb.de> 2012-04-22 22:28:48 +0200
commit: 6540afeae0c66c99c24d43446dab90836170a4e6 (patch)
tree: 9d4ed5065c9ad95ad8bc4a26a6f5924e83019acd /arch
parent: 17d2f847e6aa1181024cb881fdc6cbad18f11b04 (diff)
parent: 39ecc143b4c1f3d42e8300e7f5274681b99f95c2 (diff)
download: linux-6540afeae0c66c99c24d43446dab90836170a4e6.tar.bz2
144 files changed, 1459 insertions, 1725 deletions
diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h
index f62251e82ffa..3bb7ffeae3bc 100644
--- a/arch/alpha/include/asm/atomic.h
+++ b/arch/alpha/include/asm/atomic.h
@@ -3,6 +3,7 @@
 
 #include <linux/types.h>
 #include <asm/barrier.h>
+#include <asm/cmpxchg.h>
 
 /*
  * Atomic operations that C can't guarantee us.  Useful for
@@ -168,73 +169,6 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 	return result;
 }
 
-/*
- * Atomic exchange routines.
- */
-
-#define __ASM__MB
-#define ____xchg(type, args...)		__xchg ## type ## _local(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ## type ## _local(args)
-#include <asm/xchg.h>
-
-#define xchg_local(ptr,x)						\
-  ({									\
-     __typeof__(*(ptr)) _x_ = (x);					\
-     (__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_,	\
-				       sizeof(*(ptr)));			\
-  })
-
-#define cmpxchg_local(ptr, o, n)					\
-  ({									\
-     __typeof__(*(ptr)) _o_ = (o);					\
-     __typeof__(*(ptr)) _n_ = (n);					\
-     (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	\
-					  (unsigned long)_n_,		\
-					  sizeof(*(ptr)));		\
-  })
-
-#define cmpxchg64_local(ptr, o, n)					\
-  ({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg_local((ptr), (o), (n));					\
-  })
-
-#ifdef CONFIG_SMP
-#undef __ASM__MB
-#define __ASM__MB	"\tmb\n"
-#endif
-#undef ____xchg
-#undef ____cmpxchg
-#define ____xchg(type, args...)		__xchg ##type(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ##type(args)
-#include <asm/xchg.h>
-
-#define xchg(ptr,x)							\
-  ({									\
-     __typeof__(*(ptr)) _x_ = (x);					\
-     (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_,		\
-				 sizeof(*(ptr)));			\
-  })
-
-#define cmpxchg(ptr, o, n)						\
-  ({									\
-     __typeof__(*(ptr)) _o_ = (o);					\
-     __typeof__(*(ptr)) _n_ = (n);					\
-     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		\
-				    (unsigned long)_n_,	sizeof(*(ptr)));\
-  })
-
-#define cmpxchg64(ptr, o, n)						\
-  ({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg((ptr), (o), (n));					\
-  })
-
-#undef __ASM__MB
-#undef ____cmpxchg
-
-#define __HAVE_ARCH_CMPXCHG 1
-
 #define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
 #define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
 
diff --git a/arch/alpha/include/asm/cmpxchg.h b/arch/alpha/include/asm/cmpxchg.h
new file mode 100644
index 000000000000..429e8cd0d78e
--- /dev/null
+++ b/arch/alpha/include/asm/cmpxchg.h
@@ -0,0 +1,71 @@
+#ifndef _ALPHA_CMPXCHG_H
+#define _ALPHA_CMPXCHG_H
+
+/*
+ * Atomic exchange routines.
+ */
+
+#define __ASM__MB
+#define ____xchg(type, args...)		__xchg ## type ## _local(args)
+#define ____cmpxchg(type, args...)	__cmpxchg ## type ## _local(args)
+#include <asm/xchg.h>
+
+#define xchg_local(ptr, x)						\
+({									\
+	__typeof__(*(ptr)) _x_ = (x);					\
+	(__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_,	\
+				       sizeof(*(ptr)));			\
+})
+
+#define cmpxchg_local(ptr, o, n)					\
+({									\
+	__typeof__(*(ptr)) _o_ = (o);					\
+	__typeof__(*(ptr)) _n_ = (n);					\
+	(__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	\
+					  (unsigned long)_n_,		\
+					  sizeof(*(ptr)));		\
+})
+
+#define cmpxchg64_local(ptr, o, n)					\
+({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+})
+
+#ifdef CONFIG_SMP
+#undef __ASM__MB
+#define __ASM__MB	"\tmb\n"
+#endif
+#undef ____xchg
+#undef ____cmpxchg
+#define ____xchg(type, args...)		__xchg ##type(args)
+#define ____cmpxchg(type, args...)	__cmpxchg ##type(args)
+#include <asm/xchg.h>
+
+#define xchg(ptr, x)							\
+({									\
+	__typeof__(*(ptr)) _x_ = (x);					\
+	(__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_,		\
+				 sizeof(*(ptr)));			\
+})
+
+#define cmpxchg(ptr, o, n)						\
+({									\
+	__typeof__(*(ptr)) _o_ = (o);					\
+	__typeof__(*(ptr)) _n_ = (n);					\
+	(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,	\
+				    (unsigned long)_n_,	sizeof(*(ptr)));\
+})
+
+#define cmpxchg64(ptr, o, n)						\
+({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg((ptr), (o), (n));					\
+})
+
+#undef __ASM__MB
+#undef ____cmpxchg
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+#endif /* _ALPHA_CMPXCHG_H */
diff --git a/arch/alpha/include/asm/xchg.h b/arch/alpha/include/asm/xchg.h
index 1d1b436fbff2..0ca9724597c1 100644
--- a/arch/alpha/include/asm/xchg.h
+++ b/arch/alpha/include/asm/xchg.h
@@ -1,10 +1,10 @@
-#ifndef _ALPHA_ATOMIC_H
+#ifndef _ALPHA_CMPXCHG_H
 #error Do not include xchg.h directly!
 #else
 /*
  * xchg/xchg_local and cmpxchg/cmpxchg_local share the same code
  * except that local version do not have the expensive memory barrier.
- * So this file is included twice from asm/system.h.
+ * So this file is included twice from asm/cmpxchg.h.
  */
 
 /*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 80787f77fe88..a231594ba44e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -340,8 +340,8 @@ config ARCH_AT91
 	select IRQ_DOMAIN
 	select NEED_MACH_IO_H if PCCARD
 	help
-	  This enables support for systems based on the Atmel AT91RM9200,
-	  AT91SAM9 processors.
+	  This enables support for systems based on Atmel
+	  AT91RM9200 and AT91SAM9* processors.
 
 config ARCH_BCMRING
 	bool "Broadcom BCMRING"
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
index 6ce11c481178..797f04bedb47 100644
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -77,6 +77,8 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 		} else if (atag->hdr.tag == ATAG_MEM) {
 			if (memcount >= sizeof(mem_reg_property)/4)
 				continue;
+			if (!atag->u.mem.size)
+				continue;
 			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
 			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
 		} else if (atag->hdr.tag == ATAG_INITRD2) {
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 5f6045f1766c..dc7e8ce8e6be 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -273,7 +273,7 @@ restart:	adr	r0, LC0
 		add	r0, r0, #0x100
 		mov	r1, r6
 		sub	r2, sp, r6
-		blne	atags_to_fdt
+		bleq	atags_to_fdt
 
 		ldmfd	sp!, {r0-r3, ip, lr}
 		sub	sp, sp, #0x10000
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index 799ad1889b51..773ef484037a 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -55,7 +55,6 @@
 				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
-				interrupt-parent;
 				reg = <0xfffff000 0x200>;
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 9e6eb6ecea0e..c8042147eaa2 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -56,7 +56,6 @@
 				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
-				interrupt-parent;
 				reg = <0xfffff000 0x200>;
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 70ab3a4e026f..dd4ed748469a 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -54,7 +54,6 @@
 				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
-				interrupt-parent;
 				reg = <0xfffff000 0x200>;
 			};
 
diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi
index d73dce645667..14bc30705099 100644
--- a/arch/arm/boot/dts/db8500.dtsi
+++ b/arch/arm/boot/dts/db8500.dtsi
@@ -24,7 +24,6 @@
 			#interrupt-cells = <3>;
 			#address-cells = <1>;
 			interrupt-controller;
-			interrupt-parent;
 			reg = <0xa0411000 0x1000>,
 			      <0xa0410100 0x100>;
 		};
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index 37c0ff9c8b90..83e72294aefb 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -89,7 +89,6 @@
 			#size-cells = <0>;
 			#address-cells = <1>;
 			interrupt-controller;
-			interrupt-parent;
 			reg = <0xfff11000 0x1000>,
 			      <0xfff10100 0x100>;
 		};
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 7a66311f3066..7e288f96cedf 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -427,19 +427,18 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent)
 
 /*
  * Handle each interrupt in a single VIC.  Returns non-zero if we've
- * handled at least one interrupt.  This does a single read of the
- * status register and handles all interrupts in order from LSB first.
+ * handled at least one interrupt.  This reads the status register
+ * before handling each interrupt, which is necessary given that
+ * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
  */
 static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
 {
 	u32 stat, irq;
 	int handled = 0;
 
-	stat = readl_relaxed(vic->base + VIC_IRQ_STATUS);
-	while (stat) {
+	while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
 		irq = ffs(stat) - 1;
 		handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
-		stat &= ~(1 << irq);
 		handled = 1;
 	}
 
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
new file mode 100644
index 000000000000..67bc571ed0c3
--- /dev/null
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -0,0 +1,196 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_SOC_AT91SAM9260=y
+CONFIG_SOC_AT91SAM9263=y
+CONFIG_SOC_AT91SAM9G45=y
+CONFIG_SOC_AT91SAM9X5=y
+CONFIG_MACH_AT91SAM_DT=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_KEXEC=y
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_IPV6_SIT_6RD=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_EEPROM_93CX6=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_DAVICOM_PHY=y
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_SSB=m
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_ATMEL=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_AT91=m
+CONFIG_USB_ATMEL_USBA=m
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_ACM_MS=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_MMC=y
+CONFIG_MMC_ATMELMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_DMADEVICES=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC7=m
+CONFIG_AVERAGE=y
diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig
index bbe4e1a1f5d8..d54e2acd3ab1 100644
--- a/arch/arm/configs/at91rm9200_defconfig
+++ b/arch/arm/configs/at91rm9200_defconfig
@@ -14,6 +14,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91RM9200=y
 CONFIG_MACH_ONEARM=y
 CONFIG_ARCH_AT91RM9200DK=y
 CONFIG_MACH_AT91RM9200EK=y
diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h
index 5c5ca2ea62b0..bfc198c75913 100644
--- a/arch/arm/include/asm/jump_label.h
+++ b/arch/arm/include/asm/jump_label.h
@@ -14,7 +14,7 @@
 #define JUMP_LABEL_NOP	"nop"
 #endif
 
-static __always_inline bool arch_static_branch(struct jump_label_key *key)
+static __always_inline bool arch_static_branch(struct static_key *key)
 {
 	asm goto("1:\n\t"
 		 JUMP_LABEL_NOP "\n\t"
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index b91411371ae1..ebfac782593f 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -523,7 +523,21 @@ int __init arm_add_memory(phys_addr_t start, unsigned long size)
 	 */
 	size -= start & ~PAGE_MASK;
 	bank->start = PAGE_ALIGN(start);
-	bank->size  = size & PAGE_MASK;
+
+#ifndef CONFIG_LPAE
+	if (bank->start + size < bank->start) {
+		printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
+			"32-bit physical address space\n", (long long)start);
+		/*
+		 * To ensure bank->start + bank->size is representable in
+		 * 32 bits, we use ULONG_MAX as the upper limit rather than 4GB.
+		 * This means we lose a page after masking.
+		 */
+		size = ULONG_MAX - bank->start;
+	}
+#endif
+
+	bank->size = size & PAGE_MASK;
 
 	/*
 	 * Check whether this memory region has non-zero size or
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index fef42b21cecb..5b150afb995b 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -118,10 +118,14 @@ static int twd_cpufreq_transition(struct notifier_block *nb,
 	 * The twd clock events must be reprogrammed to account for the new
 	 * frequency.  The timer is local to a cpu, so cross-call to the
 	 * changing cpu.
+	 *
+	 * Only wait for it to finish, if the cpu is active to avoid
+	 * deadlock when cpu1 is spinning on while(!cpu_active(cpu1)) during
+	 * booting of that cpu.
 	 */
 	if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
 		smp_call_function_single(freqs->cpu, twd_update_frequency,
-			NULL, 1);
+					 NULL, cpu_active(freqs->cpu));
 
 	return NOTIFY_OK;
 }
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 45db05d8d94c..98a42f3472d5 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -9,15 +9,6 @@ config HAVE_AT91_DBGU0
 config HAVE_AT91_DBGU1
 	bool
 
-config HAVE_AT91_USART3
-	bool
-
-config HAVE_AT91_USART4
-	bool
-
-config HAVE_AT91_USART5
-	bool
-
 config AT91_SAM9_ALT_RESET
 	bool
 	default !ARCH_AT91X40
@@ -26,87 +17,121 @@ config AT91_SAM9G45_RESET
 	bool
 	default !ARCH_AT91X40
 
+config SOC_AT91SAM9
+	bool
+	select GENERIC_CLOCKEVENTS
+	select CPU_ARM926T
+
 menu "Atmel AT91 System-on-Chip"
 
-choice
-	prompt "Atmel AT91 Processor"
+comment "Atmel AT91 Processor"
 
-config ARCH_AT91RM9200
+config SOC_AT91SAM9
+	bool
+	select CPU_ARM926T
+	select AT91_SAM9_TIME
+	select AT91_SAM9_SMC
+
+config SOC_AT91RM9200
 	bool "AT91RM9200"
 	select CPU_ARM920T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_DBGU0
-	select HAVE_AT91_USART3
 
-config ARCH_AT91SAM9260
-	bool "AT91SAM9260 or AT91SAM9XE"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
+config SOC_AT91SAM9260
+	bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
+	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
-	select HAVE_AT91_USART3
-	select HAVE_AT91_USART4
-	select HAVE_AT91_USART5
 	select HAVE_NET_MACB
+	help
+	  Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
+	  or AT91SAM9G20 SoC.
 
-config ARCH_AT91SAM9261
-	bool "AT91SAM9261"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
+config SOC_AT91SAM9261
+	bool "AT91SAM9261 or AT91SAM9G10"
+	select SOC_AT91SAM9
+	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
+	help
+	  Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
+
+config SOC_AT91SAM9263
+	bool "AT91SAM9263"
+	select SOC_AT91SAM9
+	select HAVE_AT91_DBGU1
+	select HAVE_FB_ATMEL
+	select HAVE_NET_MACB
+
+config SOC_AT91SAM9RL
+	bool "AT91SAM9RL"
+	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
+	select HAVE_FB_ATMEL
 
-config ARCH_AT91SAM9G10
-	bool "AT91SAM9G10"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
+config SOC_AT91SAM9G45
+	bool "AT91SAM9G45 or AT91SAM9M10 families"
+	select SOC_AT91SAM9
+	select HAVE_AT91_DBGU1
+	select HAVE_FB_ATMEL
+	select HAVE_NET_MACB
+	help
+	  Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
+	  This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+
+config SOC_AT91SAM9X5
+	bool "AT91SAM9x5 family"
+	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
+	select HAVE_NET_MACB
+	help
+	  Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
+	  This means that your SAM9 name finishes with a '5' (except if it is
+	  AT91SAM9G45!).
+	  This support covers AT91SAM9G15, AT91SAM9G25, AT91SAM9X25, AT91SAM9G35
+	  and AT91SAM9X35.
+
+choice
+	prompt "Atmel AT91 Processor Devices for non DT boards"
+
+config ARCH_AT91_NONE
+	bool "None"
+
+config ARCH_AT91RM9200
+	bool "AT91RM9200"
+	select SOC_AT91RM9200
+
+config ARCH_AT91SAM9260
+	bool "AT91SAM9260 or AT91SAM9XE"
+	select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9261
+	bool "AT91SAM9261"
+	select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9G10
+	bool "AT91SAM9G10"
+	select SOC_AT91SAM9261
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
-	select HAVE_AT91_DBGU1
+	select SOC_AT91SAM9263
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_AT91_USART3
-	select HAVE_FB_ATMEL
-	select HAVE_AT91_DBGU0
+	select SOC_AT91SAM9RL
 
 config ARCH_AT91SAM9G20
 	bool "AT91SAM9G20"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_AT91_DBGU0
-	select HAVE_AT91_USART3
-	select HAVE_AT91_USART4
-	select HAVE_AT91_USART5
-	select HAVE_NET_MACB
+	select SOC_AT91SAM9260
 
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_AT91_USART3
-	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
-	select HAVE_AT91_DBGU1
-
-config ARCH_AT91SAM9X5
-	bool "AT91SAM9x5 family"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
-	select HAVE_AT91_DBGU0
+	select SOC_AT91SAM9G45
 
 config ARCH_AT91X40
 	bool "AT91x40"
+	depends on !MMU
 	select ARCH_USES_GETTIMEOFFSET
 
 endchoice
@@ -364,6 +389,7 @@ config MACH_AT91SAM9G20EK_2MMC
 	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
 	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
 	  onwards.
+	  <http://www.atmel.com/tools/SAM9G20-EK.aspx>
 
 config MACH_CPU9G20
 	bool "Eukrea CPU9G20 board"
@@ -433,9 +459,10 @@ comment "AT91SAM9G45 Board Type"
 config MACH_AT91SAM9M10G45EK
 	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
 	help
-	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
-	  "ES" at the end of the name means that this board is an
-	  Engineering Sample.
+	  Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
+	  Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
+	  families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+	  <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
 
 endif
 
@@ -515,41 +542,6 @@ config AT91_TIMER_HZ
 	  system clock (of at least several MHz), rounding is less of a
 	  problem so it can be safer to use a decimal values like 100.
 
-choice
-	prompt "Select a UART for early kernel messages"
-
-config AT91_EARLY_DBGU0
-	bool "DBGU on rm9200, 9260/9g20, 9261/9g10 and 9rl"
-	depends on HAVE_AT91_DBGU0
-
-config AT91_EARLY_DBGU1
-	bool "DBGU on 9263 and 9g45"
-	depends on HAVE_AT91_DBGU1
-
-config AT91_EARLY_USART0
-	bool "USART0"
-
-config AT91_EARLY_USART1
-	bool "USART1"
-
-config AT91_EARLY_USART2
-	bool "USART2"
-	depends on ! ARCH_AT91X40
-
-config AT91_EARLY_USART3
-	bool "USART3"
-	depends on HAVE_AT91_USART3
-
-config AT91_EARLY_USART4
-	bool "USART4"
-	depends on HAVE_AT91_USART4
-
-config AT91_EARLY_USART5
-	bool "USART5"
-	depends on HAVE_AT91_USART5
-
-endchoice
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 8512e53bed93..79d0f60af0b2 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -10,17 +10,25 @@ obj-		:=
 obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o
 obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
 obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
+obj-$(CONFIG_SOC_AT91SAM9)	+= at91sam926x_time.o sam9_smc.o
 
 # CPU-specific support
-obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9X5)	+= at91sam9x5.o at91sam926x_time.o sam9_smc.o
+obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o
+obj-$(CONFIG_SOC_AT91SAM9260)	+= at91sam9260.o
+obj-$(CONFIG_SOC_AT91SAM9261)	+= at91sam9261.o
+obj-$(CONFIG_SOC_AT91SAM9263)	+= at91sam9263.o
+obj-$(CONFIG_SOC_AT91SAM9G45)	+= at91sam9g45.o
+obj-$(CONFIG_SOC_AT91SAM9X5)	+= at91sam9x5.o
+obj-$(CONFIG_SOC_AT91SAM9RL)	+= at91sam9rl.o
+
+obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45_devices.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 364c19357e60..d50da1a9d0bf 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -258,18 +258,6 @@ static void __init at91rm9200_register_clocks(void)
 	clk_register(&pck3);
 }
 
-static struct clk_lookup console_clock_lookup;
-
-void __init at91rm9200_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 99ce5c955e39..d9f0d770978e 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -1152,14 +1152,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 		at91_uarts[portnr] = pdev;
 }
 
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91rm9200_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
 void __init at91_add_device_serial(void)
 {
 	int i;
@@ -1168,14 +1160,10 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
 void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
 #endif
 
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 46f774233298..a27bbec50ca3 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -268,18 +268,6 @@ static void __init at91sam9260_register_clocks(void)
 	clk_register(&pck1);
 }
 
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9260_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 5652dde4bbe2..ad00fe91d37d 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1229,14 +1229,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 		at91_uarts[portnr] = pdev;
 }
 
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9260_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
 void __init at91_add_device_serial(void)
 {
 	int i;
@@ -1245,13 +1237,9 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
 #endif
 
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 7de81e6222f1..c77d503d09d1 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -239,18 +239,6 @@ static void __init at91sam9261_register_clocks(void)
 	clk_register(&hck1);
 }
 
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9261_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 4db961a93085..9295e90b08ff 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -1051,14 +1051,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 		at91_uarts[portnr] = pdev;
 }
 
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9261_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
 void __init at91_add_device_serial(void)
 {
 	int i;
@@ -1067,13 +1059,9 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
 #endif
 
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index ef301be66575..7fae36502fbb 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -255,18 +255,6 @@ static void __init at91sam9263_register_clocks(void)
 	clk_register(&pck3);
 }
 
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9263_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index fe99206de880..dfe5bc006d5e 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -1461,14 +1461,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 		at91_uarts[portnr] = pdev;
 }
 
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9263_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
 void __init at91_add_device_serial(void)
 {
 	int i;
@@ -1477,13 +1469,9 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
 #endif
 
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index d222f8333dab..f2054495a655 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -288,18 +288,6 @@ static void __init at91sam9g45_register_clocks(void)
 	clk_register(&pck1);
 }
 
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9g45_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 6b008aee1dff..db2f88c246ff 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -1741,14 +1741,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 		at91_uarts[portnr] = pdev;
 }
 
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9g45_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
 void __init at91_add_device_serial(void)
 {
 	int i;
@@ -1757,13 +1749,9 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
 #endif
 
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index d9f2774f385e..e420085a57ef 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -232,18 +232,6 @@ static void __init at91sam9rl_register_clocks(void)
 	clk_register(&pck1);
 }
 
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9rl_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index fe4ae22e8561..9c0b1481a9a7 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -1192,14 +1192,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 		at91_uarts[portnr] = pdev;
 }
 
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9rl_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
 void __init at91_add_device_serial(void)
 {
 	int i;
@@ -1208,13 +1200,9 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
 #endif
 
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 2628384aaae1..271f994314a4 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -47,20 +47,6 @@ static void __init onearm_init_early(void)
 
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata onearm_eth_data = {
@@ -82,6 +68,16 @@ static struct at91_udc_data __initdata onearm_udc_data = {
 static void __init onearm_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&onearm_eth_data);
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 161efbaa1029..b7d8aa7b81e6 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -52,22 +52,6 @@ static void __init afeb9260_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1,
-			     ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR
-			   | ATMEL_UART_DCD | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2,
-			ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -183,6 +167,18 @@ static struct at91_cf_data afeb9260_cf_data = {
 static void __init afeb9260_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1,
+			     ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR
+			   | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2,
+			ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&afeb9260_usbh_data);
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index c6d44ee0c77e..29d3ef0a50fb 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -49,12 +49,6 @@ static void __init cam60_init_early(void)
 {
 	/* Initialize processor: 10 MHz crystal */
 	at91_initialize(10000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -175,6 +169,8 @@ static void __init cam60_add_device_nand(void)
 static void __init cam60_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	/* SPI */
 	at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 59d9cf997537..44328a6d4609 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -44,17 +44,6 @@ static void __init carmeva_init_early(void)
 {
 	/* Initialize processor: 20.000 MHz crystal */
 	at91_initialize(20000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata carmeva_eth_data = {
@@ -139,6 +128,13 @@ static struct gpio_led carmeva_leds[] = {
 static void __init carmeva_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&carmeva_eth_data);
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 5f3680e7c883..69951ec7dbf3 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -52,34 +52,6 @@ static void __init cpu9krea_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
-		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
-		ATMEL_UART_DCD | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
-		ATMEL_UART_RTS);
-
-	/* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
-		ATMEL_UART_RTS);
-
-	/* USART3 on ttyS4. (Rx, Tx) */
-	at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
-
-	/* USART4 on ttyS5. (Rx, Tx) */
-	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
-	/* USART5 on ttyS6. (Rx, Tx) */
-	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -352,6 +324,30 @@ static void __init cpu9krea_board_init(void)
 	/* NOR */
 	cpu9krea_add_device_nor();
 	/* Serial */
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
+		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+		ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART3 on ttyS4. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
+
+	/* USART4 on ttyS5. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+	/* USART5 on ttyS6. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&cpu9krea_usbh_data);
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index e094cc81fe25..895cf2dba612 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -59,28 +59,6 @@ static void __init cpuat91_init_early(void)
 
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
-		ATMEL_UART_RTS);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
-		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
-		ATMEL_UART_DCD | ATMEL_UART_RI);
-
-	/* USART2 on ttyS3 (Rx, Tx) */
-	at91_register_uart(AT91RM9200_ID_US2, 3, 0);
-
-	/* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
-		ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata cpuat91_eth_data = {
@@ -161,6 +139,24 @@ static struct platform_device *platform_devices[] __initdata = {
 static void __init cpuat91_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
+		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+		ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART2 on ttyS3 (Rx, Tx) */
+	at91_register_uart(AT91RM9200_ID_US2, 3, 0);
+
+	/* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* LEDs. */
 	at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds));
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 1a1547b1ce4e..cd813361cd26 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -47,15 +47,6 @@ static void __init csb337_init_early(void)
 {
 	/* Initialize processor: 3.6864 MHz crystal */
 	at91_initialize(3686400);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
-	/* DBGU on ttyS0 */
-	at91_register_uart(0, 0, 0);
-
-	/* make console=ttyS0 the default */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata csb337_eth_data = {
@@ -228,7 +219,11 @@ static struct gpio_led csb_leds[] = {
 
 static void __init csb337_board_init(void)
 {
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
 	/* Serial */
+	/* DBGU on ttyS0 */
+	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&csb337_eth_data);
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index f650bf39455d..7c8b05a57d7f 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -44,12 +44,6 @@ static void __init csb637_init_early(void)
 {
 	/* Initialize processor: 3.6864 MHz crystal */
 	at91_initialize(3686400);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* make console=ttyS0 (ie, DBGU) the default */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata csb637_eth_data = {
@@ -118,6 +112,8 @@ static void __init csb637_board_init(void)
 	/* LED(s) */
 	at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&csb637_eth_data);
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index c18d4d307801..a1fce05aa7a5 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -1,10 +1,6 @@
 /*
  *  Setup code for AT91SAM Evaluation Kits with Device Tree support
  *
- *  Covers: * AT91SAM9G45-EKES  board
- *          * AT91SAM9M10-EKES  board
- *          * AT91SAM9M10G45-EK board
- *
  *  Copyright (C) 2011 Atmel,
  *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
  *
@@ -49,9 +45,7 @@ static void __init at91_dt_device_init(void)
 }
 
 static const char *at91_dt_board_compat[] __initdata = {
-	"atmel,at91sam9m10g45ek",
-	"atmel,at91sam9x5ek",
-	"calao,usb-a9g20",
+	"atmel,at91sam9",
 	NULL
 };
 
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index d302ca3eeb64..bd1017297989 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -44,20 +44,6 @@ static void __init eb9200_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			| ATMEL_UART_RI);
-
-	/* USART2 on ttyS2. (Rx, Tx) - IRDA */
-	at91_register_uart(AT91RM9200_ID_US2, 2, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata eb9200_eth_data = {
@@ -101,6 +87,16 @@ static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
 static void __init eb9200_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			| ATMEL_UART_RI);
+
+	/* USART2 on ttyS2. (Rx, Tx) - IRDA */
+	at91_register_uart(AT91RM9200_ID_US2, 2, 0);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&eb9200_eth_data);
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 69966ce4d776..89cc3726a9ce 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -50,18 +50,6 @@ static void __init ecb_at91init_early(void)
 
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx & Tx only) */
-	at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata ecb_at91eth_data = {
@@ -151,7 +139,15 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = {
 
 static void __init ecb_at91board_init(void)
 {
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx & Tx only) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, 0);
 	at91_add_device_serial();
 
 	/* Ethernet */
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index f23aabef8551..558546cf63f4 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -37,15 +37,6 @@ static void __init eco920_init_early(void)
 	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
 
 	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
-	/* DBGU on ttyS0. (Rx & Tx only */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata eco920_eth_data = {
@@ -103,6 +94,10 @@ static struct spi_board_info eco920_spi_devices[] = {
 
 static void __init eco920_board_init(void)
 {
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+	/* DBGU on ttyS0. (Rx & Tx only */
+	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	at91_add_device_eth(&eco920_eth_data);
 	at91_add_device_usbh(&eco920_usbh_data);
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 1815152001f7..47658f78105d 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -41,12 +41,6 @@ static void __init flexibity_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /* USB Host port */
@@ -143,6 +137,8 @@ static struct gpio_led flexibity_leds[] = {
 static void __init flexibity_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&flexibity_usbh_data);
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index caf017f0f4ee..33411e6ecb1f 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -61,44 +61,6 @@ static void __init foxg20_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1,
-				ATMEL_UART_CTS
-				| ATMEL_UART_RTS
-				| ATMEL_UART_DTR
-				| ATMEL_UART_DSR
-				| ATMEL_UART_DCD
-				| ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2,
-		ATMEL_UART_CTS
-		| ATMEL_UART_RTS);
-
-	/* USART2 on ttyS3. (Rx & Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
-
-	/* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US3, 4,
-		ATMEL_UART_CTS
-		| ATMEL_UART_RTS);
-
-	/* USART4 on ttyS5. (Rx & Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
-	/* USART5 on ttyS6. (Rx & Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-
-	/* Set the internal pull-up resistor on DRXD */
-	at91_set_A_periph(AT91_PIN_PB14, 1);
-
 }
 
 /*
@@ -241,6 +203,39 @@ static struct i2c_board_info __initdata foxg20_i2c_devices[] = {
 static void __init foxg20_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1,
+				ATMEL_UART_CTS
+				| ATMEL_UART_RTS
+				| ATMEL_UART_DTR
+				| ATMEL_UART_DSR
+				| ATMEL_UART_DCD
+				| ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2,
+		ATMEL_UART_CTS
+		| ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx & Tx only) */
+	at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
+
+	/* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US3, 4,
+		ATMEL_UART_CTS
+		| ATMEL_UART_RTS);
+
+	/* USART4 on ttyS5. (Rx & Tx only) */
+	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+	/* USART5 on ttyS6. (Rx & Tx only) */
+	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+
+	/* Set the internal pull-up resistor on DRXD */
+	at91_set_A_periph(AT91_PIN_PB14, 1);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&foxg20_usbh_data);
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 230e71969fb7..3e0dfa643a86 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -41,38 +41,6 @@
 static void __init gsia18s_init_early(void)
 {
 	stamp9g20_init_early();
-
-	/*
-	 * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
-	 * Used for Internal Analog Modem.
-	 */
-	at91_register_uart(AT91SAM9260_ID_US0, 1,
-				ATMEL_UART_CTS | ATMEL_UART_RTS |
-				ATMEL_UART_DTR | ATMEL_UART_DSR |
-				ATMEL_UART_DCD | ATMEL_UART_RI);
-	/*
-	 * USART1 on ttyS2 (Rx, Tx, CTS, RTS).
-	 * Used for GPS or WiFi or Data stream.
-	 */
-	at91_register_uart(AT91SAM9260_ID_US1, 2,
-				ATMEL_UART_CTS | ATMEL_UART_RTS);
-	/*
-	 * USART2 on ttyS3 (Rx, Tx, CTS, RTS).
-	 * Used for External Modem.
-	 */
-	at91_register_uart(AT91SAM9260_ID_US2, 3,
-				ATMEL_UART_CTS | ATMEL_UART_RTS);
-	/*
-	 * USART3 on ttyS4 (Rx, Tx, RTS).
-	 * Used for RS-485.
-	 */
-	at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
-
-	/*
-	 * USART4 on ttyS5 (Rx, Tx).
-	 * Used for TRX433 Radio Module.
-	 */
-	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
 }
 
 /*
@@ -558,6 +526,37 @@ static int __init gsia18s_power_off_init(void)
 
 static void __init gsia18s_board_init(void)
 {
+	/*
+	 * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
+	 * Used for Internal Analog Modem.
+	 */
+	at91_register_uart(AT91SAM9260_ID_US0, 1,
+				ATMEL_UART_CTS | ATMEL_UART_RTS |
+				ATMEL_UART_DTR | ATMEL_UART_DSR |
+				ATMEL_UART_DCD | ATMEL_UART_RI);
+	/*
+	 * USART1 on ttyS2 (Rx, Tx, CTS, RTS).
+	 * Used for GPS or WiFi or Data stream.
+	 */
+	at91_register_uart(AT91SAM9260_ID_US1, 2,
+				ATMEL_UART_CTS | ATMEL_UART_RTS);
+	/*
+	 * USART2 on ttyS3 (Rx, Tx, CTS, RTS).
+	 * Used for External Modem.
+	 */
+	at91_register_uart(AT91SAM9260_ID_US2, 3,
+				ATMEL_UART_CTS | ATMEL_UART_RTS);
+	/*
+	 * USART3 on ttyS4 (Rx, Tx, RTS).
+	 * Used for RS-485.
+	 */
+	at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
+
+	/*
+	 * USART4 on ttyS5 (Rx, Tx).
+	 * Used for TRX433 Radio Module.
+	 */
+	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
 	stamp9g20_board_init();
 	at91_add_device_usbh(&usbh_data);
 	at91_add_device_udc(&udc_data);
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index efde1b2327c8..f260657f32bc 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -47,18 +47,6 @@ static void __init kafa_init_early(void)
 
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata kafa_eth_data = {
@@ -79,7 +67,15 @@ static struct at91_udc_data __initdata kafa_udc_data = {
 
 static void __init kafa_board_init(void)
 {
+	/* Set up the LEDs */
+	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&kafa_eth_data);
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 59b92aab9bcf..ba39db5482b9 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -50,24 +50,6 @@ static void __init kb9202_init_early(void)
 
 	/* Initialize processor: 10 MHz crystal */
 	at91_initialize(10000000);
-
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1 (Rx & Tx only) */
-	at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-
-	/* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
-	at91_register_uart(AT91RM9200_ID_US1, 2, 0);
-
-	/* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
-	at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata kb9202_eth_data = {
@@ -115,7 +97,21 @@ static struct atmel_nand_data __initdata kb9202_nand_data = {
 
 static void __init kb9202_board_init(void)
 {
+	/* Set up the LEDs */
+	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1 (Rx & Tx only) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, 0);
+
+	/* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
+	at91_register_uart(AT91RM9200_ID_US1, 2, 0);
+
+	/* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
+	at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&kb9202_eth_data);
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 57d5f6a4726a..d2f4cc161766 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -55,15 +55,6 @@ static void __init neocore926_init_early(void)
 {
 	/* Initialize processor: 20 MHz crystal */
 	at91_initialize(20000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -341,6 +332,11 @@ static struct ac97c_platform_data neocore926_ac97_data = {
 static void __init neocore926_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 
 	/* USB Host */
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index b4a12fc184c8..7fe638342421 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -40,17 +40,6 @@
 static void __init pcontrol_g20_init_early(void)
 {
 	stamp9g20_init_early();
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback  A2 */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
-						| ATMEL_UART_RTS);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485  X5 */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS
-						| ATMEL_UART_RTS);
-
-	/* USART2 on ttyS3. (Rx, Tx)  9bit-Bus  Multidrop-mode  X4 */
-	at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
 }
 
 static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
@@ -199,6 +188,16 @@ static struct spi_board_info pcontrol_g20_spi_devices[] = {
 
 static void __init pcontrol_g20_board_init(void)
 {
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback  A2 */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
+						| ATMEL_UART_RTS);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485  X5 */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS
+						| ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx, Tx)  9bit-Bus  Multidrop-mode  X4 */
+	at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
 	stamp9g20_board_init();
 	at91_add_device_usbh(&usbh_data);
 	at91_add_device_eth(&macb_data);
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 59e35dd14863..b45c0a5d5ca7 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -48,17 +48,6 @@ static void __init picotux200_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			  | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			  | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata picotux200_eth_data = {
@@ -106,6 +95,13 @@ static struct platform_device picotux200_flash = {
 static void __init picotux200_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			  | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			  | ATMEL_UART_RI);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&picotux200_eth_data);
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index b6ed5ed7081a..0c61bf0d272c 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -52,24 +52,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
 	at91_initialize(12000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS1 (ie, USART0) */
-	at91_set_serial_console(1);
-
 }
 
 /*
@@ -235,6 +217,19 @@ static struct gpio_led ek_leds[] = {
 static void __init ek_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 01332aa538b2..afd7a4713766 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -50,20 +50,6 @@ static void __init dk_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata dk_eth_data = {
@@ -190,7 +176,17 @@ static struct gpio_led dk_leds[] = {
 
 static void __init dk_board_init(void)
 {
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&dk_eth_data);
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 11cbaa8946fe..78ffc8315f97 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -50,20 +50,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata ek_eth_data = {
@@ -161,7 +147,17 @@ static struct gpio_led ek_leds[] = {
 
 static void __init ek_board_init(void)
 {
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&ek_eth_data);
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index af0750fafa29..24ab9be7510f 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -35,26 +35,6 @@ static void __init rsi_ews_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	/* This one is for debugging */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	/* Dialin/-out modem interface */
-	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART3 on ttyS4. (Rx, Tx, RTS) */
-	/* RS485 communication */
-	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -204,7 +184,23 @@ static struct platform_device rsiews_nor_flash = {
  */
 static void __init rsi_ews_board_init(void)
 {
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	/* This one is for debugging */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	/* Dialin/-out modem interface */
+	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART3 on ttyS4. (Rx, Tx, RTS) */
+	/* RS485 communication */
+	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
 	at91_add_device_serial();
 	at91_set_gpio_output(AT91_PIN_PA21, 0);
 	/* Ethernet */
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index e8b116b6cba6..cdd21f2595d2 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -48,23 +48,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -184,7 +167,20 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
 
 static void __init ek_board_init(void)
 {
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index d5aec55b0eb4..7b3c3913551a 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -54,20 +54,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -320,6 +306,16 @@ static void __init ek_add_device_buttons(void) {}
 static void __init ek_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index c3f994462864..065b5ee35070 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -58,15 +58,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -576,7 +567,12 @@ static struct gpio_led ek_leds[] = {
 
 static void __init ek_board_init(void)
 {
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 2ffe50f3a9e9..983cb98d2465 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -57,15 +57,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 16.367 MHz crystal */
 	at91_initialize(16367660);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -412,6 +403,11 @@ static struct at91_can_data ek_can_data = {
 static void __init ek_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 8923ec9f5831..3d615532ae5c 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -65,20 +65,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -372,6 +358,16 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
 static void __init ek_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index c88e908ddd82..9a87f0b072f8 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -53,16 +53,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
 	at91_initialize(12000000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 not connected on the -EK board */
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -457,6 +447,12 @@ static struct platform_device *devices[] __initdata = {
 static void __init ek_board_init(void)
 {
 	/* Serial */
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 not connected on the -EK board */
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB HS Host */
 	at91_add_device_usbh_ohci(&ek_usbh_hs_data);
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index b109ce2ba864..be3239f13daa 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -42,15 +42,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
 	at91_initialize(12000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -296,6 +287,11 @@ static void __init ek_add_device_buttons(void) {}
 static void __init ek_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB HS */
 	at91_add_device_usba(&ek_usba_udc_data);
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index ebc9d01ce742..9d446f1bb45f 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -43,16 +43,6 @@
 static void __init snapper9260_init_early(void)
 {
 	at91_initialize(18432000);
-
-	/* Debug on ttyS0 */
-	at91_register_uart(0, 0, 0);
-	at91_set_serial_console(0);
-
-	at91_register_uart(AT91SAM9260_ID_US0, 1,
-			   ATMEL_UART_CTS | ATMEL_UART_RTS);
-	at91_register_uart(AT91SAM9260_ID_US1, 2,
-			   ATMEL_UART_CTS | ATMEL_UART_RTS);
-	at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
 }
 
 static struct at91_usbh_data __initdata snapper9260_usbh_data = {
@@ -168,6 +158,14 @@ static void __init snapper9260_board_init(void)
 	snapper9260_i2c_isl1208.irq = gpio_to_irq(AT91_PIN_PA31);
 	i2c_register_board_info(0, &snapper9260_i2c_isl1208, 1);
 
+	/* Debug on ttyS0 */
+	at91_register_uart(0, 0, 0);
+
+	at91_register_uart(AT91SAM9260_ID_US0, 1,
+			   ATMEL_UART_CTS | ATMEL_UART_RTS);
+	at91_register_uart(AT91SAM9260_ID_US1, 2,
+			   ATMEL_UART_CTS | ATMEL_UART_RTS);
+	at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
 	at91_add_device_serial();
 	at91_add_device_usbh(&snapper9260_usbh_data);
 	at91_add_device_udc(&snapper9260_udc_data);
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 7640049410a0..ee86f9d7ee72 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -36,44 +36,6 @@ void __init stamp9g20_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static void __init stamp9g20evb_init_early(void)
-{
-	stamp9g20_init_early();
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-						| ATMEL_UART_DTR | ATMEL_UART_DSR
-						| ATMEL_UART_DCD | ATMEL_UART_RI);
-}
-
-static void __init portuxg20_init_early(void)
-{
-	stamp9g20_init_early();
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-						| ATMEL_UART_DTR | ATMEL_UART_DSR
-						| ATMEL_UART_DCD | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* USART4 on ttyS5. (Rx, Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
-	/* USART5 on ttyS6. (Rx, Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
 }
 
 /*
@@ -254,6 +216,8 @@ void add_w1(void)
 void __init stamp9g20_board_init(void)
 {
 	/* Serial */
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	/* NAND */
 	add_device_nand();
@@ -269,6 +233,22 @@ void __init stamp9g20_board_init(void)
 
 static void __init portuxg20_board_init(void)
 {
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+						| ATMEL_UART_DTR | ATMEL_UART_DSR
+						| ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* USART4 on ttyS5. (Rx, Tx only) */
+	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+	/* USART5 on ttyS6. (Rx, Tx only) */
+	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
 	stamp9g20_board_init();
 	/* USB Host */
 	at91_add_device_usbh(&usbh_data);
@@ -286,6 +266,10 @@ static void __init portuxg20_board_init(void)
 
 static void __init stamp9g20evb_board_init(void)
 {
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+						| ATMEL_UART_DTR | ATMEL_UART_DSR
+						| ATMEL_UART_DCD | ATMEL_UART_RI);
 	stamp9g20_board_init();
 	/* USB Host */
 	at91_add_device_usbh(&usbh_data);
@@ -303,7 +287,7 @@ MACHINE_START(PORTUXG20, "taskit PortuxG20")
 	/* Maintainer: taskit GmbH */
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
-	.init_early	= portuxg20_init_early,
+	.init_early	= stamp9g20_init_early,
 	.init_irq	= at91_init_irq_default,
 	.init_machine	= portuxg20_board_init,
 MACHINE_END
@@ -312,7 +296,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20")
 	/* Maintainer: taskit GmbH */
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
-	.init_early	= stamp9g20evb_init_early,
+	.init_early	= stamp9g20_init_early,
 	.init_irq	= at91_init_irq_default,
 	.init_machine	= stamp9g20evb_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index b7483a3d0980..332ecd40bd02 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -53,12 +53,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.00 MHz crystal */
 	at91_initialize(12000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -325,6 +319,8 @@ static void __init ek_add_device_leds(void)
 static void __init ek_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 38dd279d30b2..d56665ea4b55 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -58,26 +58,6 @@ static void __init yl9200_init_early(void)
 
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
-	at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			| ATMEL_UART_RI);
-
-	/* USART0 on ttyS2. (Rx & Tx only to JP3) */
-	at91_register_uart(AT91RM9200_ID_US0, 2, 0);
-
-	/* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
-	at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -560,7 +540,23 @@ void __init yl9200_add_device_video(void) {}
 
 static void __init yl9200_board_init(void)
 {
+	/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
+	at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			| ATMEL_UART_RI);
+
+	/* USART0 on ttyS2. (Rx & Tx only to JP3) */
+	at91_register_uart(AT91RM9200_ID_US0, 2, 0);
+
+	/* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
+	at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&yl9200_eth_data);
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
index ece1f9aefb47..0c6381516a5a 100644
--- a/arch/arm/mach-at91/cpuidle.c
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -21,6 +21,7 @@
 #include <linux/export.h>
 #include <asm/proc-fns.h>
 #include <asm/cpuidle.h>
+#include <mach/cpu.h>
 
 #include "pm.h"
 
@@ -33,7 +34,12 @@ static int at91_enter_idle(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
 			       int index)
 {
-	at91_standby();
+	if (cpu_is_at91rm9200())
+		at91rm9200_standby();
+	else if (cpu_is_at91sam9g45())
+		at91sam9g45_standby();
+	else
+		at91sam9_standby();
 
 	return index;
 }
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index dd9b346c451d..0a60bf837037 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -40,17 +40,6 @@ extern struct sys_timer at91sam926x_timer;
 extern struct sys_timer at91x40_timer;
 
  /* Clocks */
-/*
- * function to specify the clock of the default console. As we do not
- * use the device/driver bus, the dev_name is not intialize. So we need
- * to link the clock to a specific con_id only "usart"
- */
-extern void __init at91rm9200_set_console_clock(int id);
-extern void __init at91sam9260_set_console_clock(int id);
-extern void __init at91sam9261_set_console_clock(int id);
-extern void __init at91sam9263_set_console_clock(int id);
-extern void __init at91sam9rl_set_console_clock(int id);
-extern void __init at91sam9g45_set_console_clock(int id);
 #ifdef CONFIG_AT91_PMC_UNIT
 extern int __init at91_clock_init(unsigned long main_clock);
 extern int __init at91_dt_clock_init(void);
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index 603e6aac2a4f..e67317c67761 100644
--- a/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -88,11 +88,6 @@
 #define AT91RM9200_BASE_RTC	0xfffffe00	/* Real-Time Clock */
 #define AT91RM9200_BASE_MC	0xffffff00	/* Memory Controllers */
 
-#define AT91_USART0	AT91RM9200_BASE_US0
-#define AT91_USART1	AT91RM9200_BASE_US1
-#define AT91_USART2	AT91RM9200_BASE_US2
-#define AT91_USART3	AT91RM9200_BASE_US3
-
 /*
  * Internal Memory.
  */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 08ae9afd00fe..416c7b6c56d3 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -95,13 +95,6 @@
 #define AT91SAM9260_BASE_WDT	0xfffffd40
 #define AT91SAM9260_BASE_GPBR	0xfffffd50
 
-#define AT91_USART0	AT91SAM9260_BASE_US0
-#define AT91_USART1	AT91SAM9260_BASE_US1
-#define AT91_USART2	AT91SAM9260_BASE_US2
-#define AT91_USART3	AT91SAM9260_BASE_US3
-#define AT91_USART4	AT91SAM9260_BASE_US4
-#define AT91_USART5	AT91SAM9260_BASE_US5
-
 
 /*
  * Internal Memory.
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 44fbdc12ee62..a041406d06ee 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -79,10 +79,6 @@
 #define AT91SAM9261_BASE_WDT	0xfffffd40
 #define AT91SAM9261_BASE_GPBR	0xfffffd50
 
-#define AT91_USART0	AT91SAM9261_BASE_US0
-#define AT91_USART1	AT91SAM9261_BASE_US1
-#define AT91_USART2	AT91SAM9261_BASE_US2
-
 
 /*
  * Internal Memory.
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index d96cbb2e03c4..d201029d60b3 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -95,10 +95,6 @@
 #define AT91SAM9263_BASE_RTT1	0xfffffd50
 #define AT91SAM9263_BASE_GPBR	0xfffffd60
 
-#define AT91_USART0	AT91SAM9263_BASE_US0
-#define AT91_USART1	AT91SAM9263_BASE_US1
-#define AT91_USART2	AT91SAM9263_BASE_US2
-
 #define AT91_SMC	AT91_SMC0
 
 /*
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index d052abcff852..3a4da24d5911 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -106,11 +106,6 @@
 #define AT91SAM9G45_BASE_RTC	0xfffffdb0
 #define AT91SAM9G45_BASE_GPBR	0xfffffd60
 
-#define AT91_USART0	AT91SAM9G45_BASE_US0
-#define AT91_USART1	AT91SAM9G45_BASE_US1
-#define AT91_USART2	AT91SAM9G45_BASE_US2
-#define AT91_USART3	AT91SAM9G45_BASE_US3
-
 /*
  * Internal Memory.
  */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index e0073eb10144..a15db56d33fa 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -89,11 +89,6 @@
 #define AT91SAM9RL_BASE_GPBR	0xfffffd60
 #define AT91SAM9RL_BASE_RTC	0xfffffe00
 
-#define AT91_USART0	AT91SAM9RL_BASE_US0
-#define AT91_USART1	AT91SAM9RL_BASE_US1
-#define AT91_USART2	AT91SAM9RL_BASE_US2
-#define AT91_USART3	AT91SAM9RL_BASE_US3
-
 
 /*
  * Internal Memory.
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
index 88e43d534cdf..c75ee19b58d3 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9x5.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
@@ -55,14 +55,6 @@
 #define AT91SAM9X5_BASE_USART2	0xf8024000
 
 /*
- * Base addresses for early serial code (uncompress.h)
- */
-#define AT91_DBGU	AT91_BASE_DBGU0
-#define AT91_USART0	AT91SAM9X5_BASE_USART0
-#define AT91_USART1	AT91SAM9X5_BASE_USART1
-#define AT91_USART2	AT91SAM9X5_BASE_USART2
-
-/*
  * Internal Memory.
  */
 #define AT91SAM9X5_SRAM_BASE	0x00300000	/* Internal SRAM base address */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 49a821192c65..369afc2ffc5b 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -121,7 +121,6 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de
 #define ATMEL_UART_RI	0x20
 
 extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
-extern void __init at91_set_serial_console(unsigned portnr);
 
 extern struct platform_device *atmel_default_console_device;
 
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 0118c3338552..73d2fd209ce4 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -54,6 +54,7 @@
 #define ARCH_REVISON_9200_BGA	(0 << 0)
 #define ARCH_REVISON_9200_PQFP	(1 << 0)
 
+#ifndef __ASSEMBLY__
 enum at91_soc_type {
 	/* 920T */
 	AT91_SOC_RM9200,
@@ -106,7 +107,7 @@ static inline int at91_soc_is_detected(void)
 	return at91_soc_initdata.type != AT91_SOC_NONE;
 }
 
-#ifdef CONFIG_ARCH_AT91RM9200
+#ifdef CONFIG_SOC_AT91RM9200
 #define cpu_is_at91rm9200()	(at91_soc_initdata.type == AT91_SOC_RM9200)
 #define cpu_is_at91rm9200_bga()	(at91_soc_initdata.subtype == AT91_SOC_RM9200_BGA)
 #define cpu_is_at91rm9200_pqfp() (at91_soc_initdata.subtype == AT91_SOC_RM9200_PQFP)
@@ -116,45 +117,37 @@ static inline int at91_soc_is_detected(void)
 #define cpu_is_at91rm9200_pqfp() (0)
 #endif
 
-#ifdef CONFIG_ARCH_AT91SAM9260
+#ifdef CONFIG_SOC_AT91SAM9260
 #define cpu_is_at91sam9xe()	(at91_soc_initdata.subtype == AT91_SOC_SAM9XE)
 #define cpu_is_at91sam9260()	(at91_soc_initdata.type == AT91_SOC_SAM9260)
+#define cpu_is_at91sam9g20()	(at91_soc_initdata.type == AT91_SOC_SAM9G20)
 #else
 #define cpu_is_at91sam9xe()	(0)
 #define cpu_is_at91sam9260()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9G20
-#define cpu_is_at91sam9g20()	(at91_soc_initdata.type == AT91_SOC_SAM9G20)
-#else
 #define cpu_is_at91sam9g20()	(0)
 #endif
 
-#ifdef CONFIG_ARCH_AT91SAM9261
+#ifdef CONFIG_SOC_AT91SAM9261
 #define cpu_is_at91sam9261()	(at91_soc_initdata.type == AT91_SOC_SAM9261)
-#else
-#define cpu_is_at91sam9261()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9G10
 #define cpu_is_at91sam9g10()	(at91_soc_initdata.type == AT91_SOC_SAM9G10)
 #else
+#define cpu_is_at91sam9261()	(0)
 #define cpu_is_at91sam9g10()	(0)
 #endif
 
-#ifdef CONFIG_ARCH_AT91SAM9263
+#ifdef CONFIG_SOC_AT91SAM9263
 #define cpu_is_at91sam9263()	(at91_soc_initdata.type == AT91_SOC_SAM9263)
 #else
 #define cpu_is_at91sam9263()	(0)
 #endif
 
-#ifdef CONFIG_ARCH_AT91SAM9RL
+#ifdef CONFIG_SOC_AT91SAM9RL
 #define cpu_is_at91sam9rl()	(at91_soc_initdata.type == AT91_SOC_SAM9RL)
 #else
 #define cpu_is_at91sam9rl()	(0)
 #endif
 
-#ifdef CONFIG_ARCH_AT91SAM9G45
+#ifdef CONFIG_SOC_AT91SAM9G45
 #define cpu_is_at91sam9g45()	(at91_soc_initdata.type == AT91_SOC_SAM9G45)
 #define cpu_is_at91sam9g45es()	(at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES)
 #define cpu_is_at91sam9m10()	(at91_soc_initdata.subtype == AT91_SOC_SAM9M10)
@@ -168,7 +161,7 @@ static inline int at91_soc_is_detected(void)
 #define cpu_is_at91sam9m11()	(0)
 #endif
 
-#ifdef CONFIG_ARCH_AT91SAM9X5
+#ifdef CONFIG_SOC_AT91SAM9X5
 #define cpu_is_at91sam9x5()	(at91_soc_initdata.type == AT91_SOC_SAM9X5)
 #define cpu_is_at91sam9g15()	(at91_soc_initdata.subtype == AT91_SOC_SAM9G15)
 #define cpu_is_at91sam9g35()	(at91_soc_initdata.subtype == AT91_SOC_SAM9G35)
@@ -189,5 +182,6 @@ static inline int at91_soc_is_detected(void)
  * definitions may reduce clutter in common drivers.
  */
 #define cpu_is_at32ap7000()	(0)
+#endif /* __ASSEMBLY__ */
 
 #endif /* __MACH_CPU_H__ */
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index e9e29a6c3868..3a01f8ff7e74 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -22,27 +22,17 @@
 /* 9263, 9g45 */
 #define AT91_BASE_DBGU1	0xffffee00
 
-#if defined(CONFIG_ARCH_AT91RM9200)
+#if defined(CONFIG_ARCH_AT91X40)
+#include <mach/at91x40.h>
+#else
 #include <mach/at91rm9200.h>
-#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
 #include <mach/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
 #include <mach/at91sam9261.h>
-#elif defined(CONFIG_ARCH_AT91SAM9263)
 #include <mach/at91sam9263.h>
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
 #include <mach/at91sam9rl.h>
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
 #include <mach/at91sam9g45.h>
-#elif defined(CONFIG_ARCH_AT91SAM9X5)
 #include <mach/at91sam9x5.h>
-#elif defined(CONFIG_ARCH_AT91X40)
-#include <mach/at91x40.h>
-#else
-#error "Unsupported AT91 processor"
-#endif
 
-#if !defined(CONFIG_ARCH_AT91X40)
 /*
  * On all at91 except rm9200 and x40 have the System Controller starts
  * at address 0xffffc000 and has a size of 16KiB.
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index 4218647c1fcd..6f6118d1576a 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -1,7 +1,8 @@
 /*
  * arch/arm/mach-at91/include/mach/uncompress.h
  *
- *  Copyright (C) 2003 SAN People
+ * Copyright (C) 2003 SAN People
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -25,22 +26,147 @@
 #include <linux/atmel_serial.h>
 #include <mach/hardware.h>
 
-#if defined(CONFIG_AT91_EARLY_DBGU0)
-#define UART_OFFSET AT91_BASE_DBGU0
-#elif defined(CONFIG_AT91_EARLY_DBGU1)
-#define UART_OFFSET AT91_BASE_DBGU1
-#elif defined(CONFIG_AT91_EARLY_USART0)
-#define UART_OFFSET AT91_USART0
-#elif defined(CONFIG_AT91_EARLY_USART1)
-#define UART_OFFSET AT91_USART1
-#elif defined(CONFIG_AT91_EARLY_USART2)
-#define UART_OFFSET AT91_USART2
-#elif defined(CONFIG_AT91_EARLY_USART3)
-#define UART_OFFSET AT91_USART3
-#elif defined(CONFIG_AT91_EARLY_USART4)
-#define UART_OFFSET AT91_USART4
-#elif defined(CONFIG_AT91_EARLY_USART5)
-#define UART_OFFSET AT91_USART5
+#include <mach/at91_dbgu.h>
+#include <mach/cpu.h>
+
+void __iomem *at91_uart;
+
+#if !defined(CONFIG_ARCH_AT91X40)
+static const u32 uarts_rm9200[] = {
+	AT91_BASE_DBGU0,
+	AT91RM9200_BASE_US0,
+	AT91RM9200_BASE_US1,
+	AT91RM9200_BASE_US2,
+	AT91RM9200_BASE_US3,
+	0,
+};
+
+static const u32 uarts_sam9260[] = {
+	AT91_BASE_DBGU0,
+	AT91SAM9260_BASE_US0,
+	AT91SAM9260_BASE_US1,
+	AT91SAM9260_BASE_US2,
+	AT91SAM9260_BASE_US3,
+	AT91SAM9260_BASE_US4,
+	AT91SAM9260_BASE_US5,
+	0,
+};
+
+static const u32 uarts_sam9261[] = {
+	AT91_BASE_DBGU0,
+	AT91SAM9261_BASE_US0,
+	AT91SAM9261_BASE_US1,
+	AT91SAM9261_BASE_US2,
+	0,
+};
+
+static const u32 uarts_sam9263[] = {
+	AT91_BASE_DBGU1,
+	AT91SAM9263_BASE_US0,
+	AT91SAM9263_BASE_US1,
+	AT91SAM9263_BASE_US2,
+	0,
+};
+
+static const u32 uarts_sam9g45[] = {
+	AT91_BASE_DBGU1,
+	AT91SAM9G45_BASE_US0,
+	AT91SAM9G45_BASE_US1,
+	AT91SAM9G45_BASE_US2,
+	AT91SAM9G45_BASE_US3,
+	0,
+};
+
+static const u32 uarts_sam9rl[] = {
+	AT91_BASE_DBGU0,
+	AT91SAM9RL_BASE_US0,
+	AT91SAM9RL_BASE_US1,
+	AT91SAM9RL_BASE_US2,
+	AT91SAM9RL_BASE_US3,
+	0,
+};
+
+static const u32 uarts_sam9x5[] = {
+	AT91_BASE_DBGU0,
+	AT91SAM9X5_BASE_USART0,
+	AT91SAM9X5_BASE_USART1,
+	AT91SAM9X5_BASE_USART2,
+	0,
+};
+
+static inline const u32* decomp_soc_detect(u32 dbgu_base)
+{
+	u32 cidr, socid;
+
+	cidr = __raw_readl(dbgu_base + AT91_DBGU_CIDR);
+	socid = cidr & ~AT91_CIDR_VERSION;
+
+	switch (socid) {
+	case ARCH_ID_AT91RM9200:
+		return uarts_rm9200;
+
+	case ARCH_ID_AT91SAM9G20:
+	case ARCH_ID_AT91SAM9260:
+		return uarts_sam9260;
+
+	case ARCH_ID_AT91SAM9261:
+		return uarts_sam9261;
+
+	case ARCH_ID_AT91SAM9263:
+		return uarts_sam9263;
+
+	case ARCH_ID_AT91SAM9G45:
+		return uarts_sam9g45;
+
+	case ARCH_ID_AT91SAM9RL64:
+		return uarts_sam9rl;
+
+	case ARCH_ID_AT91SAM9X5:
+		return uarts_sam9x5;
+	}
+
+	/* at91sam9g10 */
+	if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
+		return uarts_sam9261;
+	}
+	/* at91sam9xe */
+	else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
+		return uarts_sam9260;
+	}
+
+	return NULL;
+}
+
+static inline void arch_decomp_setup(void)
+{
+	int i = 0;
+	const u32* usarts;
+
+	usarts = decomp_soc_detect(AT91_BASE_DBGU0);
+
+	if (!usarts)
+		usarts = decomp_soc_detect(AT91_BASE_DBGU1);
+	if (!usarts) {
+		at91_uart = NULL;
+		return;
+	}
+
+	do {
+		/* physical address */
+		at91_uart = (void __iomem *)usarts[i];
+
+		if (__raw_readl(at91_uart + ATMEL_US_BRGR))
+			return;
+		i++;
+	} while (usarts[i]);
+
+	at91_uart = NULL;
+}
+#else
+static inline void arch_decomp_setup(void)
+{
+	at91_uart = NULL;
+}
 #endif
 
 /*
@@ -52,28 +178,24 @@
  */
 static void putc(int c)
 {
-#ifdef UART_OFFSET
-	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
+	if (!at91_uart)
+		return;
 
-	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
+	while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXRDY))
 		barrier();
-	__raw_writel(c, sys + ATMEL_US_THR);
-#endif
+	__raw_writel(c, at91_uart + ATMEL_US_THR);
 }
 
 static inline void flush(void)
 {
-#ifdef UART_OFFSET
-	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
+	if (!at91_uart)
+		return;
 
 	/* wait for transmission to complete */
-	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
+	while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
 		barrier();
-#endif
 }
 
-#define arch_decomp_setup()
-
 #define arch_decomp_wdog()
 
 #endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index f630250c6b87..1bfaad628731 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -261,7 +261,12 @@ static int at91_pm_enter(suspend_state_t state)
 			 * For ARM 926 based chips, this requirement is weaker
 			 * as at91sam9 can access a RAM in self-refresh mode.
 			 */
-			at91_standby();
+			if (cpu_is_at91rm9200())
+				at91rm9200_standby();
+			else if (cpu_is_at91sam9g45())
+				at91sam9g45_standby();
+			else
+				at91sam9_standby();
 			break;
 
 		case PM_SUSPEND_ON:
@@ -307,10 +312,9 @@ static int __init at91_pm_init(void)
 
 	pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
 
-#ifdef CONFIG_ARCH_AT91RM9200
 	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
-	at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
-#endif
+	if (cpu_is_at91rm9200())
+		at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
 
 	suspend_set_ops(&at91_pm_ops);
 
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 89f56f3a802e..38f467c6b710 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -12,7 +12,6 @@
 #define __ARCH_ARM_MACH_AT91_PM
 
 #include <mach/at91_ramc.h>
-#ifdef CONFIG_ARCH_AT91RM9200
 #include <mach/at91rm9200_sdramc.h>
 
 /*
@@ -43,10 +42,6 @@ static inline void at91rm9200_standby(void)
 		  "r" (lpr));
 }
 
-#define at91_standby at91rm9200_standby
-
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
-
 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
  * remember.
  */
@@ -75,11 +70,7 @@ static inline void at91sam9g45_standby(void)
 	at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
 }
 
-#define at91_standby at91sam9g45_standby
-
-#else
-
-#ifdef CONFIG_ARCH_AT91SAM9263
+#ifdef CONFIG_SOC_AT91SAM9263
 /*
  * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
  * handle those cases both here and in the Suspend-To-RAM support.
@@ -102,8 +93,4 @@ static inline void at91sam9_standby(void)
 	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr);
 }
 
-#define at91_standby at91sam9_standby
-
-#endif
-
 #endif
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index db5452123f17..098c28ddf025 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -18,7 +18,7 @@
 #include <mach/at91_ramc.h>
 
 
-#ifdef CONFIG_ARCH_AT91SAM9263
+#ifdef CONFIG_SOC_AT91SAM9263
 /*
  * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
  * handle those cases both here and in the Suspend-To-RAM support.
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index 5db4aa45404a..683dddfd8b13 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -26,30 +26,30 @@ static inline int at91_soc_is_enabled(void)
 	return at91_boot_soc.init != NULL;
 }
 
-#if !defined(CONFIG_ARCH_AT91RM9200)
+#if !defined(CONFIG_SOC_AT91RM9200)
 #define at91rm9200_soc	at91_boot_soc
 #endif
 
-#if !(defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20))
+#if !defined(CONFIG_SOC_AT91SAM9260)
 #define at91sam9260_soc	at91_boot_soc
 #endif
 
-#if !(defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10))
+#if !defined(CONFIG_SOC_AT91SAM9261)
 #define at91sam9261_soc	at91_boot_soc
 #endif
 
-#if !defined(CONFIG_ARCH_AT91SAM9263)
+#if !defined(CONFIG_SOC_AT91SAM9263)
 #define at91sam9263_soc	at91_boot_soc
 #endif
 
-#if !defined(CONFIG_ARCH_AT91SAM9G45)
+#if !defined(CONFIG_SOC_AT91SAM9G45)
 #define at91sam9g45_soc	at91_boot_soc
 #endif
 
-#if !defined(CONFIG_ARCH_AT91SAM9RL)
+#if !defined(CONFIG_SOC_AT91SAM9RL)
 #define at91sam9rl_soc	at91_boot_soc
 #endif
 
-#if !defined(CONFIG_ARCH_AT91SAM9X5)
+#if !defined(CONFIG_SOC_AT91SAM9X5)
 #define at91sam9x5_soc	at91_boot_soc
 #endif
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 0491ceef1cda..e81c35f936b5 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -368,6 +368,7 @@ comment "Flattened Device Tree based board for EXYNOS SoCs"
 
 config MACH_EXYNOS4_DT
 	bool "Samsung Exynos4 Machine using device tree"
+	depends on ARCH_EXYNOS4
 	select CPU_EXYNOS4210
 	select USE_OF
 	select ARM_AMBA
@@ -380,6 +381,7 @@ config MACH_EXYNOS4_DT
 
 config MACH_EXYNOS5_DT
 	bool "SAMSUNG EXYNOS5 Machine using device tree"
+	depends on ARCH_EXYNOS5
 	select SOC_EXYNOS5250
 	select USE_OF
 	select ARM_AMBA
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index 9bee8535d9e0..591e78521a9f 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -212,6 +212,8 @@
 #define IRQ_MFC				EXYNOS4_IRQ_MFC
 #define IRQ_SDO				EXYNOS4_IRQ_SDO
 
+#define IRQ_I2S0			EXYNOS4_IRQ_I2S0
+
 #define IRQ_ADC				EXYNOS4_IRQ_ADC0
 #define IRQ_TC				EXYNOS4_IRQ_PEN0
 
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 024d38ff1718..6e6d11ff352a 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -89,6 +89,10 @@
 #define EXYNOS4_PA_MDMA1		0x12840000
 #define EXYNOS4_PA_PDMA0		0x12680000
 #define EXYNOS4_PA_PDMA1		0x12690000
+#define EXYNOS5_PA_MDMA0		0x10800000
+#define EXYNOS5_PA_MDMA1		0x11C10000
+#define EXYNOS5_PA_PDMA0		0x121A0000
+#define EXYNOS5_PA_PDMA1		0x121B0000
 
 #define EXYNOS4_PA_SYSMMU_MDMA		0x10A40000
 #define EXYNOS4_PA_SYSMMU_SSS		0x10A50000
diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h
index e141c1fd68d8..d9578a58ae7f 100644
--- a/arch/arm/mach-exynos/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos/include/mach/regs-clock.h
@@ -255,9 +255,15 @@
 
 /* For EXYNOS5250 */
 
+#define EXYNOS5_APLL_LOCK			EXYNOS_CLKREG(0x00000)
 #define EXYNOS5_APLL_CON0			EXYNOS_CLKREG(0x00100)
 #define EXYNOS5_CLKSRC_CPU			EXYNOS_CLKREG(0x00200)
+#define EXYNOS5_CLKMUX_STATCPU			EXYNOS_CLKREG(0x00400)
 #define EXYNOS5_CLKDIV_CPU0			EXYNOS_CLKREG(0x00500)
+#define EXYNOS5_CLKDIV_CPU1			EXYNOS_CLKREG(0x00504)
+#define EXYNOS5_CLKDIV_STATCPU0			EXYNOS_CLKREG(0x00600)
+#define EXYNOS5_CLKDIV_STATCPU1			EXYNOS_CLKREG(0x00604)
+
 #define EXYNOS5_MPLL_CON0			EXYNOS_CLKREG(0x04100)
 #define EXYNOS5_CLKSRC_CORE1			EXYNOS_CLKREG(0x04204)
 
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index 0d26f50081ad..4711c8920e37 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -45,7 +45,7 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 				"exynos4210-uart.3", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.2", NULL),
+	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
 	{},
 };
 
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index b3982c867c9c..b4f1f902ce6d 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -307,49 +307,7 @@ static struct i2c_board_info i2c1_devs[] __initdata = {
 };
 
 /* TSP */
-static u8 mxt_init_vals[] = {
-	/* MXT_GEN_COMMAND(6) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_GEN_POWER(7) */
-	0x20, 0xff, 0x32,
-	/* MXT_GEN_ACQUIRE(8) */
-	0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23,
-	/* MXT_TOUCH_MULTI(9) */
-	0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00,
-	0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00,
-	/* MXT_TOUCH_KEYARRAY(15) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
-	0x00,
-	/* MXT_SPT_GPIOPWM(19) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_PROCI_GRIPFACE(20) */
-	0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04,
-	0x0f, 0x0a,
-	/* MXT_PROCG_NOISE(22) */
-	0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00,
-	0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03,
-	/* MXT_TOUCH_PROXIMITY(23) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_PROCI_ONETOUCH(24) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_SPT_SELFTEST(25) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00,
-	/* MXT_PROCI_TWOTOUCH(27) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_SPT_CTECONFIG(28) */
-	0x00, 0x00, 0x02, 0x08, 0x10, 0x00,
-};
-
 static struct mxt_platform_data mxt_platform_data = {
-	.config			= mxt_init_vals,
-	.config_length		= ARRAY_SIZE(mxt_init_vals),
-
 	.x_line			= 18,
 	.y_line			= 11,
 	.x_size			= 1024,
@@ -571,7 +529,7 @@ static struct regulator_init_data __initdata max8997_ldo7_data = {
 
 static struct regulator_init_data __initdata max8997_ldo8_data = {
 	.constraints	= {
-		.name		= "VUSB/VDAC_3.3V_C210",
+		.name		= "VUSB+VDAC_3.3V_C210",
 		.min_uV		= 3300000,
 		.max_uV		= 3300000,
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
@@ -1347,6 +1305,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 
 static void __init nuri_map_io(void)
 {
+	clk_xusbxti.rate = 24000000;
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
@@ -1379,7 +1338,6 @@ static void __init nuri_machine_init(void)
 	nuri_camera_init();
 
 	nuri_ehci_init();
-	clk_xusbxti.rate = 24000000;
 
 	/* Last */
 	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 6bb9dbdd73fd..7ebf79c2ab34 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -29,6 +29,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/iic.h>
@@ -1057,6 +1058,7 @@ static struct platform_device *universal_devices[] __initdata = {
 
 static void __init universal_map_io(void)
 {
+	clk_xusbxti.rate = 24000000;
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 3698a370d636..26aac363a064 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -86,9 +86,6 @@ static void __init halibut_init(void)
 static void __init halibut_fixup(struct tag *tags, char **cmdline,
 				 struct meminfo *mi)
 {
-	mi->nr_banks=1;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].size = (101*1024*1024);
 }
 
 static void __init halibut_map_io(void)
diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c
index 25105c1027fe..89bf6b426699 100644
--- a/arch/arm/mach-msm/board-trout-panel.c
+++ b/arch/arm/mach-msm/board-trout-panel.c
@@ -12,6 +12,7 @@
 
 #include <asm/io.h>
 #include <asm/mach-types.h>
+#include <asm/system_info.h>
 
 #include <mach/msm_fb.h>
 #include <mach/vreg.h>
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 5414f76ec0a9..d4060a37e23d 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/clkdev.h>
 
+#include <asm/system_info.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c
index 67e701c7f183..9980dc736e7b 100644
--- a/arch/arm/mach-msm/proc_comm.c
+++ b/arch/arm/mach-msm/proc_comm.c
@@ -121,7 +121,7 @@ int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
  * and unknown state. This function should be called early to
  * wait on the ARM9.
  */
-void __init proc_comm_boot_wait(void)
+void __devinit proc_comm_boot_wait(void)
 {
 	void __iomem *base = MSM_SHARED_RAM_BASE;
  
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 7072e0d651b1..3d9d746b221a 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -165,83 +165,3 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 
 	return 0;
 }
-
-#ifdef CONFIG_CPU_FREQ
-/*
- * Walk PRCM rate table and fillout cpufreq freq_table
- * XXX This should be replaced by an OPP layer in the near future
- */
-static struct cpufreq_frequency_table *freq_table;
-
-void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	const struct prcm_config *prcm;
-	int i = 0;
-	int tbl_sz = 0;
-
-	if (!cpu_is_omap24xx())
-		return;
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sclk->rate)
-			continue;
-
-		/* don't put bypass rates in table */
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			continue;
-
-		tbl_sz++;
-	}
-
-	/*
-	 * XXX Ensure that we're doing what CPUFreq expects for this error
-	 * case and the following one
-	 */
-	if (tbl_sz == 0) {
-		pr_warning("%s: no matching entries in rate_table\n",
-			   __func__);
-		return;
-	}
-
-	/* Include the CPUFREQ_TABLE_END terminator entry */
-	tbl_sz++;
-
-	freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
-			     GFP_ATOMIC);
-	if (!freq_table) {
-		pr_err("%s: could not kzalloc frequency table\n", __func__);
-		return;
-	}
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sclk->rate)
-			continue;
-
-		/* don't put bypass rates in table */
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			continue;
-
-		freq_table[i].index = i;
-		freq_table[i].frequency = prcm->mpu_speed / 1000;
-		i++;
-	}
-
-	freq_table[i].index = i;
-	freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	*table = &freq_table[0];
-}
-
-void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	if (!cpu_is_omap24xx())
-		return;
-
-	kfree(freq_table);
-}
-
-#endif
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index f57ed5baeccf..d9f4931513f9 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -536,10 +536,5 @@ struct clk_functions omap2_clk_functions = {
 	.clk_set_rate		= omap2_clk_set_rate,
 	.clk_set_parent		= omap2_clk_set_parent,
 	.clk_disable_unused	= omap2_clk_disable_unused,
-#ifdef CONFIG_CPU_FREQ
-	/* These will be removed when the OPP code is integrated */
-	.clk_init_cpufreq_table	= omap2_clk_init_cpufreq_table,
-	.clk_exit_cpufreq_table	= omap2_clk_exit_cpufreq_table,
-#endif
 };
 
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index b8c2a686481c..a1bb23a23351 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -146,14 +146,6 @@ extern const struct clksel_rate gpt_sys_rates[];
 extern const struct clksel_rate gfx_l3_rates[];
 extern const struct clksel_rate dsp_ick_rates[];
 
-#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ)
-extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
-extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
-#else
-#define omap2_clk_init_cpufreq_table	0
-#define omap2_clk_exit_cpufreq_table	0
-#endif
-
 extern const struct clkops clkops_omap2_iclk_dflt_wait;
 extern const struct clkops clkops_omap2_iclk_dflt;
 extern const struct clkops clkops_omap2_iclk_idle_only;
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index 86ce62f66190..b8337e248b09 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -33,8 +33,6 @@
 #include <mach/irqs.h>
 #include <mach/dma.h>
 
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
 static u8 pdma0_peri[] = {
 	DMACH_UART0_RX,
 	DMACH_UART0_TX,
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index a9ea64e0da0d..48d018f2332b 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -484,8 +484,8 @@ static struct wm8994_pdata wm8994_platform_data = {
 	.gpio_defaults[8] = 0x0100,
 	.gpio_defaults[9] = 0x0100,
 	.gpio_defaults[10] = 0x0100,
-	.ldo[0]	= { S5PV210_MP03(6), NULL, &wm8994_ldo1_data },	/* XM0FRNB_2 */
-	.ldo[1]	= { 0, NULL, &wm8994_ldo2_data },
+	.ldo[0]	= { S5PV210_MP03(6), &wm8994_ldo1_data },	/* XM0FRNB_2 */
+	.ldo[1]	= { 0, &wm8994_ldo2_data },
 };
 
 /* GPIO I2C PMIC */
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 2cf5ed75f390..a8933de3d627 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -674,8 +674,8 @@ static struct wm8994_pdata wm8994_platform_data = {
 	.gpio_defaults[8] = 0x0100,
 	.gpio_defaults[9] = 0x0100,
 	.gpio_defaults[10] = 0x0100,
-	.ldo[0]	= { S5PV210_MP03(6), NULL, &wm8994_ldo1_data },	/* XM0FRNB_2 */
-	.ldo[1]	= { 0, NULL, &wm8994_ldo2_data },
+	.ldo[0]	= { S5PV210_MP03(6), &wm8994_ldo1_data },	/* XM0FRNB_2 */
+	.ldo[1]	= { 0, &wm8994_ldo2_data },
 };
 
 /* GPIO I2C PMIC */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 7edef9121632..7c8a7d8467bf 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -723,7 +723,7 @@ config CPU_HIGH_VECTOR
 	bool "Select the High exception vector"
 	help
 	  Say Y here to select high exception vector(0xFFFF0000~).
-	  The exception vector can be vary depending on the platform
+	  The exception vector can vary depending on the platform
 	  design in nommu mode. If your platform needs to select
 	  high exception vector, say Y.
 	  Otherwise or if you are unsure, say N, and the low exception
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 9055b5a84ec5..f07467533365 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -320,7 +320,7 @@ retry:
 	 */
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
-	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+	if (!(fault & VM_FAULT_ERROR) && flags & FAULT_FLAG_ALLOW_RETRY) {
 		if (fault & VM_FAULT_MAJOR) {
 			tsk->maj_flt++;
 			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 6486d2f253cd..d51225f90ae2 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -13,6 +13,7 @@
 #include <asm/sections.h>
 #include <asm/page.h>
 #include <asm/setup.h>
+#include <asm/traps.h>
 #include <asm/mach/arch.h>
 
 #include "mm.h"
@@ -39,6 +40,7 @@ void __init sanity_check_meminfo(void)
  */
 void __init paging_init(struct machine_desc *mdesc)
 {
+	early_trap_init((void *)CONFIG_VECTORS_BASE);
 	bootmem_init();
 }
 
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index f1c8486f7501..c2e2b66f72b5 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -255,6 +255,18 @@ __v7_setup:
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
 #endif
+#ifndef CONFIG_ARM_THUMBEE
+	mrc	p15, 0, r0, c0, c1, 0		@ read ID_PFR0 for ThumbEE
+	and	r0, r0, #(0xf << 12)		@ ThumbEE enabled field
+	teq	r0, #(1 << 12)			@ check if ThumbEE is present
+	bne	1f
+	mov	r5, #0
+	mcr	p14, 6, r5, c1, c0, 0		@ Initialize TEEHBR to 0
+	mrc	p14, 6, r0, c0, c0, 0		@ load TEECR
+	orr	r0, r0, #1			@ set the 1st bit in order to
+	mcr	p14, 6, r0, c0, c0, 0		@ stop userspace TEEHBR access
+1:
+#endif
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}
 #ifdef CONFIG_CPU_ENDIAN_BE8
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 8506cbb7fea4..62ec5c452792 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -398,32 +398,6 @@ struct clk dummy_ck = {
 	.ops	= &clkops_null,
 };
 
-#ifdef CONFIG_CPU_FREQ
-void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	unsigned long flags;
-
-	if (!arch_clock || !arch_clock->clk_init_cpufreq_table)
-		return;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	arch_clock->clk_init_cpufreq_table(table);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-
-void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	unsigned long flags;
-
-	if (!arch_clock || !arch_clock->clk_exit_cpufreq_table)
-		return;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	arch_clock->clk_exit_cpufreq_table(table);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-#endif
-
 /*
  *
  */
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 240a7b9fd946..d0ef57c1d71b 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -272,8 +272,6 @@ struct clk {
 #endif
 };
 
-struct cpufreq_frequency_table;
-
 struct clk_functions {
 	int		(*clk_enable)(struct clk *clk);
 	void		(*clk_disable)(struct clk *clk);
@@ -283,10 +281,6 @@ struct clk_functions {
 	void		(*clk_allow_idle)(struct clk *clk);
 	void		(*clk_deny_idle)(struct clk *clk);
 	void		(*clk_disable_unused)(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
-	void		(*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
-	void		(*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **);
-#endif
 };
 
 extern int mpurate;
@@ -301,10 +295,6 @@ extern void recalculate_root_clocks(void);
 extern unsigned long followparent_recalc(struct clk *clk);
 extern void clk_enable_init_clocks(void);
 unsigned long omap_fixed_divisor_recalc(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
-extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
-extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
-#endif
 extern struct clk *omap_clk_get_by_name(const char *name);
 extern int omap_clk_enable_autoidle_all(void);
 extern int omap_clk_disable_autoidle_all(void);
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 71553f410016..a0ffc77da809 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -302,6 +302,7 @@ comment "Power management"
 config SAMSUNG_PM_DEBUG
 	bool "S3C2410 PM Suspend debug"
 	depends on PM
+	select DEBUG_LL
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
 	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
diff --git a/arch/c6x/include/asm/irq.h b/arch/c6x/include/asm/irq.h
index f13b78d5e1ca..ab4577f93d96 100644
--- a/arch/c6x/include/asm/irq.h
+++ b/arch/c6x/include/asm/irq.h
@@ -42,10 +42,6 @@
 /* This number is used when no interrupt has been assigned */
 #define NO_IRQ		0
 
-struct irq_data;
-extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
-extern irq_hw_number_t virq_to_hw(unsigned int virq);
-
 extern void __init init_pic_c64xplus(void);
 
 extern void init_IRQ(void);
diff --git a/arch/c6x/kernel/irq.c b/arch/c6x/kernel/irq.c
index 65b8ddf54b44..c90fb5e82ad7 100644
--- a/arch/c6x/kernel/irq.c
+++ b/arch/c6x/kernel/irq.c
@@ -130,16 +130,3 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 	seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
 	return 0;
 }
-
-irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
-{
-	return d->hwirq;
-}
-EXPORT_SYMBOL_GPL(irqd_to_hwirq);
-
-irq_hw_number_t virq_to_hw(unsigned int virq)
-{
-	struct irq_data *irq_data = irq_get_irq_data(virq);
-	return WARN_ON(!irq_data) ? 0 : irq_data->hwirq;
-}
-EXPORT_SYMBOL_GPL(virq_to_hw);
diff --git a/arch/ia64/include/asm/cmpxchg.h b/arch/ia64/include/asm/cmpxchg.h
index 4c96187e2049..4f37dbbb8640 100644
--- a/arch/ia64/include/asm/cmpxchg.h
+++ b/arch/ia64/include/asm/cmpxchg.h
@@ -1 +1,147 @@
-#include <asm/intrinsics.h>
+#ifndef _ASM_IA64_CMPXCHG_H
+#define _ASM_IA64_CMPXCHG_H
+
+/*
+ * Compare/Exchange, forked from asm/intrinsics.h
+ * which was:
+ *
+ *	Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+/* include compiler specific intrinsics */
+#include <asm/ia64regs.h>
+#ifdef __INTEL_COMPILER
+# include <asm/intel_intrin.h>
+#else
+# include <asm/gcc_intrin.h>
+#endif
+
+/*
+ * This function doesn't exist, so you'll get a linker error if
+ * something tries to do an invalid xchg().
+ */
+extern void ia64_xchg_called_with_bad_pointer(void);
+
+#define __xchg(x, ptr, size)						\
+({									\
+	unsigned long __xchg_result;					\
+									\
+	switch (size) {							\
+	case 1:								\
+		__xchg_result = ia64_xchg1((__u8 *)ptr, x);		\
+		break;							\
+									\
+	case 2:								\
+		__xchg_result = ia64_xchg2((__u16 *)ptr, x);		\
+		break;							\
+									\
+	case 4:								\
+		__xchg_result = ia64_xchg4((__u32 *)ptr, x);		\
+		break;							\
+									\
+	case 8:								\
+		__xchg_result = ia64_xchg8((__u64 *)ptr, x);		\
+		break;							\
+	default:							\
+		ia64_xchg_called_with_bad_pointer();			\
+	}								\
+	__xchg_result;							\
+})
+
+#define xchg(ptr, x)							\
+((__typeof__(*(ptr))) __xchg((unsigned long) (x), (ptr), sizeof(*(ptr))))
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg().
+ */
+extern long ia64_cmpxchg_called_with_bad_pointer(void);
+
+#define ia64_cmpxchg(sem, ptr, old, new, size)				\
+({									\
+	__u64 _o_, _r_;							\
+									\
+	switch (size) {							\
+	case 1:								\
+		_o_ = (__u8) (long) (old);				\
+		break;							\
+	case 2:								\
+		_o_ = (__u16) (long) (old);				\
+		break;							\
+	case 4:								\
+		_o_ = (__u32) (long) (old);				\
+		break;							\
+	case 8:								\
+		_o_ = (__u64) (long) (old);				\
+		break;							\
+	default:							\
+		break;							\
+	}								\
+	switch (size) {							\
+	case 1:								\
+		_r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_);	\
+		break;							\
+									\
+	case 2:								\
+		_r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_);	\
+		break;							\
+									\
+	case 4:								\
+		_r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_);	\
+		break;							\
+									\
+	case 8:								\
+		_r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_);	\
+		break;							\
+									\
+	default:							\
+		_r_ = ia64_cmpxchg_called_with_bad_pointer();		\
+		break;							\
+	}								\
+	(__typeof__(old)) _r_;						\
+})
+
+#define cmpxchg_acq(ptr, o, n)	\
+	ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr)))
+#define cmpxchg_rel(ptr, o, n)	\
+	ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr)))
+
+/* for compatibility with other platforms: */
+#define cmpxchg(ptr, o, n)	cmpxchg_acq((ptr), (o), (n))
+#define cmpxchg64(ptr, o, n)	cmpxchg_acq((ptr), (o), (n))
+
+#define cmpxchg_local		cmpxchg
+#define cmpxchg64_local		cmpxchg64
+
+#ifdef CONFIG_IA64_DEBUG_CMPXCHG
+# define CMPXCHG_BUGCHECK_DECL	int _cmpxchg_bugcheck_count = 128;
+# define CMPXCHG_BUGCHECK(v)						\
+do {									\
+	if (_cmpxchg_bugcheck_count-- <= 0) {				\
+		void *ip;						\
+		extern int printk(const char *fmt, ...);		\
+		ip = (void *) ia64_getreg(_IA64_REG_IP);		\
+		printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v));\
+		break;							\
+	}								\
+} while (0)
+#else /* !CONFIG_IA64_DEBUG_CMPXCHG */
+# define CMPXCHG_BUGCHECK_DECL
+# define CMPXCHG_BUGCHECK(v)
+#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_CMPXCHG_H */
diff --git a/arch/ia64/include/asm/intrinsics.h b/arch/ia64/include/asm/intrinsics.h
index e4076b511829..d129e367e764 100644
--- a/arch/ia64/include/asm/intrinsics.h
+++ b/arch/ia64/include/asm/intrinsics.h
@@ -18,6 +18,7 @@
 #else
 # include <asm/gcc_intrin.h>
 #endif
+#include <asm/cmpxchg.h>
 
 #define ia64_native_get_psr_i()	(ia64_native_getreg(_IA64_REG_PSR) & IA64_PSR_I)
 
@@ -81,119 +82,6 @@ extern unsigned long __bad_increment_for_ia64_fetch_and_add (void);
 
 #define ia64_fetch_and_add(i,v)	(ia64_fetchadd(i, v, rel) + (i)) /* return new value */
 
-/*
- * This function doesn't exist, so you'll get a linker error if
- * something tries to do an invalid xchg().
- */
-extern void ia64_xchg_called_with_bad_pointer (void);
-
-#define __xchg(x,ptr,size)						\
-({									\
-	unsigned long __xchg_result;					\
-									\
-	switch (size) {							\
-	      case 1:							\
-		__xchg_result = ia64_xchg1((__u8 *)ptr, x);		\
-		break;							\
-									\
-	      case 2:							\
-		__xchg_result = ia64_xchg2((__u16 *)ptr, x);		\
-		break;							\
-									\
-	      case 4:							\
-		__xchg_result = ia64_xchg4((__u32 *)ptr, x);		\
-		break;							\
-									\
-	      case 8:							\
-		__xchg_result = ia64_xchg8((__u64 *)ptr, x);		\
-		break;							\
-	      default:							\
-		ia64_xchg_called_with_bad_pointer();			\
-	}								\
-	__xchg_result;							\
-})
-
-#define xchg(ptr,x)							     \
-  ((__typeof__(*(ptr))) __xchg ((unsigned long) (x), (ptr), sizeof(*(ptr))))
-
-/*
- * Atomic compare and exchange.  Compare OLD with MEM, if identical,
- * store NEW in MEM.  Return the initial value in MEM.  Success is
- * indicated by comparing RETURN with OLD.
- */
-
-#define __HAVE_ARCH_CMPXCHG 1
-
-/*
- * This function doesn't exist, so you'll get a linker error
- * if something tries to do an invalid cmpxchg().
- */
-extern long ia64_cmpxchg_called_with_bad_pointer (void);
-
-#define ia64_cmpxchg(sem,ptr,old,new,size)						\
-({											\
-	__u64 _o_, _r_;									\
-											\
-	switch (size) {									\
-	      case 1: _o_ = (__u8 ) (long) (old); break;				\
-	      case 2: _o_ = (__u16) (long) (old); break;				\
-	      case 4: _o_ = (__u32) (long) (old); break;				\
-	      case 8: _o_ = (__u64) (long) (old); break;				\
-	      default: break;								\
-	}										\
-	switch (size) {									\
-	      case 1:									\
-	      	_r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_);			\
-		break;									\
-											\
-	      case 2:									\
-	       _r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_);			\
-		break;									\
-											\
-	      case 4:									\
-	      	_r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_);			\
-		break;									\
-											\
-	      case 8:									\
-		_r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_);			\
-		break;									\
-											\
-	      default:									\
-		_r_ = ia64_cmpxchg_called_with_bad_pointer();				\
-		break;									\
-	}										\
-	(__typeof__(old)) _r_;								\
-})
-
-#define cmpxchg_acq(ptr, o, n)	\
-	ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr)))
-#define cmpxchg_rel(ptr, o, n)	\
-	ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr)))
-
-/* for compatibility with other platforms: */
-#define cmpxchg(ptr, o, n)	cmpxchg_acq((ptr), (o), (n))
-#define cmpxchg64(ptr, o, n)	cmpxchg_acq((ptr), (o), (n))
-
-#define cmpxchg_local		cmpxchg
-#define cmpxchg64_local		cmpxchg64
-
-#ifdef CONFIG_IA64_DEBUG_CMPXCHG
-# define CMPXCHG_BUGCHECK_DECL	int _cmpxchg_bugcheck_count = 128;
-# define CMPXCHG_BUGCHECK(v)							\
-  do {										\
-	if (_cmpxchg_bugcheck_count-- <= 0) {					\
-		void *ip;							\
-		extern int printk(const char *fmt, ...);			\
-		ip = (void *) ia64_getreg(_IA64_REG_IP);			\
-		printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v));	\
-		break;								\
-	}									\
-  } while (0)
-#else /* !CONFIG_IA64_DEBUG_CMPXCHG */
-# define CMPXCHG_BUGCHECK_DECL
-# define CMPXCHG_BUGCHECK(v)
-#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */
-
 #endif
 
 #ifdef __KERNEL__
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index cf417e510736..e648af92ced1 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -33,8 +33,6 @@ extern atomic_t ppc_n_lost_interrupts;
 /* Same thing, used by the generic IRQ code */
 #define NR_IRQS_LEGACY		NUM_ISA_INTERRUPTS
 
-struct irq_data;
-extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
 extern irq_hw_number_t virq_to_hw(unsigned int virq);
 
 /**
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 3e57a00b8cba..ba3aeb4bc06a 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -206,40 +206,43 @@ reenable_mmu:				/* re-enable mmu so we can */
 	andi.	r10,r10,MSR_EE		/* Did EE change? */
 	beq	1f
 
-	/* Save handler and return address into the 2 unused words
-	 * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything
-	 * else can be recovered from the pt_regs except r3 which for
-	 * normal interrupts has been set to pt_regs and for syscalls
-	 * is an argument, so we temporarily use ORIG_GPR3 to save it
-	 */
-	stw	r9,8(r1)
-	stw	r11,12(r1)
-	stw	r3,ORIG_GPR3(r1)
 	/*
 	 * The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1.
 	 * If from user mode there is only one stack frame on the stack, and
 	 * accessing CALLER_ADDR1 will cause oops. So we need create a dummy
 	 * stack frame to make trace_hardirqs_off happy.
+	 *
+	 * This is handy because we also need to save a bunch of GPRs,
+	 * r3 can be different from GPR3(r1) at this point, r9 and r11
+	 * contains the old MSR and handler address respectively,
+	 * r4 & r5 can contain page fault arguments that need to be passed
+	 * along as well. r12, CCR, CTR, XER etc... are left clobbered as
+	 * they aren't useful past this point (aren't syscall arguments),
+	 * the rest is restored from the exception frame.
 	 */
+	stwu	r1,-32(r1)
+	stw	r9,8(r1)
+	stw	r11,12(r1)
+	stw	r3,16(r1)
+	stw	r4,20(r1)
+	stw	r5,24(r1)
 	andi.	r12,r12,MSR_PR
-	beq	11f
-	stwu	r1,-16(r1)
+	b	11f
 	bl	trace_hardirqs_off
-	addi	r1,r1,16
 	b	12f
-
 11:
 	bl	trace_hardirqs_off
 12:
+	lwz	r5,24(r1)
+	lwz	r4,20(r1)
+	lwz	r3,16(r1)
+	lwz	r11,12(r1)
+	lwz	r9,8(r1)
+	addi	r1,r1,32
 	lwz	r0,GPR0(r1)
-	lwz	r3,ORIG_GPR3(r1)
-	lwz	r4,GPR4(r1)
-	lwz	r5,GPR5(r1)
 	lwz	r6,GPR6(r1)
 	lwz	r7,GPR7(r1)
 	lwz	r8,GPR8(r1)
-	lwz	r9,8(r1)
-	lwz	r11,12(r1)
 1:	mtctr	r11
 	mtlr	r9
 	bctr				/* jump to handler */
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 243dbabfe74d..5ec1b2354ca6 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -560,12 +560,6 @@ void do_softirq(void)
 	local_irq_restore(flags);
 }
 
-irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
-{
-	return d->hwirq;
-}
-EXPORT_SYMBOL_GPL(irqd_to_hwirq);
-
 irq_hw_number_t virq_to_hw(unsigned int virq)
 {
 	struct irq_data *irq_data = irq_get_irq_data(virq);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index f88698c0f332..4937c9690090 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1235,7 +1235,7 @@ void __ppc64_runlatch_on(void)
 	ctrl |= CTRL_RUNLATCH;
 	mtspr(SPRN_CTRLT, ctrl);
 
-	ti->local_flags |= TLF_RUNLATCH;
+	ti->local_flags |= _TLF_RUNLATCH;
 }
 
 /* Called with hard IRQs off */
@@ -1244,7 +1244,7 @@ void __ppc64_runlatch_off(void)
 	struct thread_info *ti = current_thread_info();
 	unsigned long ctrl;
 
-	ti->local_flags &= ~TLF_RUNLATCH;
+	ti->local_flags &= ~_TLF_RUNLATCH;
 
 	ctrl = mfspr(SPRN_CTRLF);
 	ctrl &= ~CTRL_RUNLATCH;
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index db360fc4cf0e..d09f3e8e6867 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -392,7 +392,7 @@ static int axon_msi_probe(struct platform_device *device)
 	}
 	memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES);
 
-	msic->irq_domain = irq_domain_add_nomap(dn, &msic_host_ops, msic);
+	msic->irq_domain = irq_domain_add_nomap(dn, 0, &msic_host_ops, msic);
 	if (!msic->irq_domain) {
 		printk(KERN_ERR "axon_msi: couldn't allocate irq_domain for %s\n",
 		       dn->full_name);
diff --git a/arch/powerpc/platforms/cell/beat_interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c
index e5c3a2c6090d..f9a48af335cb 100644
--- a/arch/powerpc/platforms/cell/beat_interrupt.c
+++ b/arch/powerpc/platforms/cell/beat_interrupt.c
@@ -239,7 +239,7 @@ void __init beatic_init_IRQ(void)
 	ppc_md.get_irq = beatic_get_irq;
 
 	/* Allocate an irq host */
-	beatic_host = irq_domain_add_nomap(NULL, &beatic_pic_host_ops, NULL);
+	beatic_host = irq_domain_add_nomap(NULL, 0, &beatic_pic_host_ops, NULL);
 	BUG_ON(beatic_host == NULL);
 	irq_set_default_host(beatic_host);
 }
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index a81e5a88fbdf..b4ddaa3fbb29 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -192,7 +192,7 @@ static int psurge_secondary_ipi_init(void)
 {
 	int rc = -ENOMEM;
 
-	psurge_host = irq_domain_add_nomap(NULL, &psurge_host_ops, NULL);
+	psurge_host = irq_domain_add_nomap(NULL, 0, &psurge_host_ops, NULL);
 
 	if (psurge_host)
 		psurge_secondary_virq = irq_create_direct_mapping(psurge_host);
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 2a4ff86cc21f..5f3b23220b8e 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -753,9 +753,8 @@ void __init ps3_init_IRQ(void)
 	unsigned cpu;
 	struct irq_domain *host;
 
-	host = irq_domain_add_nomap(NULL, &ps3_host_ops, NULL);
+	host = irq_domain_add_nomap(NULL, PS3_PLUG_MAX + 1, &ps3_host_ops, NULL);
 	irq_set_default_host(host);
-	irq_set_virq_count(PS3_PLUG_MAX + 1);
 
 	for_each_possible_cpu(cpu) {
 		struct ps3_private *pd = &per_cpu(ps3_private, cpu);
diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c
index fea13c7b1aee..b93c2c9ccb1d 100644
--- a/arch/sparc/kernel/ds.c
+++ b/arch/sparc/kernel/ds.c
@@ -1264,4 +1264,4 @@ static int __init ds_init(void)
 	return vio_register_driver(&ds_driver);
 }
 
-subsys_initcall(ds_init);
+fs_initcall(ds_init);
diff --git a/arch/sparc/kernel/leon_pci.c b/arch/sparc/kernel/leon_pci.c
index aba6b958b2a5..19f56058742b 100644
--- a/arch/sparc/kernel/leon_pci.c
+++ b/arch/sparc/kernel/leon_pci.c
@@ -45,7 +45,6 @@ void leon_pci_init(struct platform_device *ofdev, struct leon_pci_info *info)
 
 void __devinit pcibios_fixup_bus(struct pci_bus *pbus)
 {
-	struct leon_pci_info *info = pbus->sysdata;
 	struct pci_dev *dev;
 	int i, has_io, has_mem;
 	u16 cmd;
@@ -111,18 +110,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 	return pci_enable_resources(dev, mask);
 }
 
-struct device_node *pci_device_to_OF_node(struct pci_dev *pdev)
-{
-	/*
-	 * Currently the OpenBoot nodes are not connected with the PCI device,
-	 * this is because the LEON PROM does not create PCI nodes. Eventually
-	 * this will change and the same approach as pcic.c can be used to
-	 * match PROM nodes with pci devices.
-	 */
-	return NULL;
-}
-EXPORT_SYMBOL(pci_device_to_OF_node);
-
 void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
 {
 #ifdef CONFIG_PCI_DEBUG
diff --git a/arch/sparc/kernel/rtrap_64.S b/arch/sparc/kernel/rtrap_64.S
index 77f1b95e0806..9171fc238def 100644
--- a/arch/sparc/kernel/rtrap_64.S
+++ b/arch/sparc/kernel/rtrap_64.S
@@ -20,11 +20,6 @@
 
 		.text
 		.align			32
-__handle_softirq:
-		call			do_softirq
-		 nop
-		ba,a,pt			%xcc, __handle_softirq_continue
-		 nop
 __handle_preemption:
 		call			schedule
 		 wrpr			%g0, RTRAP_PSTATE, %pstate
@@ -89,9 +84,7 @@ rtrap:
 		cmp			%l1, 0
 
 		/* mm/ultra.S:xcall_report_regs KNOWS about this load. */
-		bne,pn			%icc, __handle_softirq
 		 ldx			[%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
-__handle_softirq_continue:
 rtrap_xcall:
 		sethi			%hi(0xf << 20), %l4
 		and			%l1, %l4, %l4
diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c
index 7705c6731e28..df3155a17991 100644
--- a/arch/sparc/mm/fault_32.c
+++ b/arch/sparc/mm/fault_32.c
@@ -225,6 +225,8 @@ asmlinkage void do_sparc_fault(struct pt_regs *regs, int text_fault, int write,
 	unsigned long g2;
 	int from_user = !(regs->psr & PSR_PS);
 	int fault, code;
+	unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+			      (write ? FAULT_FLAG_WRITE : 0));
 
 	if(text_fault)
 		address = regs->pc;
@@ -251,6 +253,7 @@ asmlinkage void do_sparc_fault(struct pt_regs *regs, int text_fault, int write,
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 
+retry:
 	down_read(&mm->mmap_sem);
 
 	/*
@@ -289,7 +292,11 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
+	fault = handle_mm_fault(mm, vma, address, flags);
+
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return;
+
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
@@ -297,13 +304,29 @@ good_area:
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR) {
-		current->maj_flt++;
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
-	} else {
-		current->min_flt++;
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
+
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+		if (fault & VM_FAULT_MAJOR) {
+			current->maj_flt++;
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ,
+				      1, regs, address);
+		} else {
+			current->min_flt++;
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN,
+				      1, regs, address);
+		}
+		if (fault & VM_FAULT_RETRY) {
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+			/* No need to up_read(&mm->mmap_sem) as we would
+			 * have already released it in __lock_page_or_retry
+			 * in mm/filemap.c.
+			 */
+
+			goto retry;
+		}
 	}
+
 	up_read(&mm->mmap_sem);
 	return;
 
diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c
index 504c0622f729..1fe0429b6314 100644
--- a/arch/sparc/mm/fault_64.c
+++ b/arch/sparc/mm/fault_64.c
@@ -279,6 +279,7 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs)
 	unsigned int insn = 0;
 	int si_code, fault_code, fault;
 	unsigned long address, mm_rss;
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	fault_code = get_thread_fault_code();
 
@@ -333,6 +334,8 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs)
 			insn = get_fault_insn(regs, insn);
 			goto handle_kernel_fault;
 		}
+
+retry:
 		down_read(&mm->mmap_sem);
 	}
 
@@ -423,7 +426,12 @@ good_area:
 			goto bad_area;
 	}
 
-	fault = handle_mm_fault(mm, vma, address, (fault_code & FAULT_CODE_WRITE) ? FAULT_FLAG_WRITE : 0);
+	flags |= ((fault_code & FAULT_CODE_WRITE) ? FAULT_FLAG_WRITE : 0);
+	fault = handle_mm_fault(mm, vma, address, flags);
+
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return;
+
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
@@ -431,12 +439,27 @@ good_area:
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR) {
-		current->maj_flt++;
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
-	} else {
-		current->min_flt++;
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
+
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+		if (fault & VM_FAULT_MAJOR) {
+			current->maj_flt++;
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ,
+				      1, regs, address);
+		} else {
+			current->min_flt++;
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN,
+				      1, regs, address);
+		}
+		if (fault & VM_FAULT_RETRY) {
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+			/* No need to up_read(&mm->mmap_sem) as we would
+			 * have already released it in __lock_page_or_retry
+			 * in mm/filemap.c.
+			 */
+
+			goto retry;
+		}
 	}
 	up_read(&mm->mmap_sem);
 
diff --git a/arch/tile/kernel/proc.c b/arch/tile/kernel/proc.c
index 7a9327046404..446a7f52cc11 100644
--- a/arch/tile/kernel/proc.c
+++ b/arch/tile/kernel/proc.c
@@ -146,7 +146,6 @@ static ctl_table unaligned_table[] = {
 	},
 	{}
 };
-#endif
 
 static struct ctl_path tile_path[] = {
 	{ .procname = "tile" },
@@ -155,10 +154,9 @@ static struct ctl_path tile_path[] = {
 
 static int __init proc_sys_tile_init(void)
 {
-#ifndef __tilegx__  /* FIXME: GX: no support for unaligned access yet */
 	register_sysctl_paths(tile_path, unaligned_table);
-#endif
 	return 0;
 }
 
 arch_initcall(proc_sys_tile_init);
+#endif
diff --git a/arch/tile/kernel/smpboot.c b/arch/tile/kernel/smpboot.c
index b949edcec200..172aef7d3159 100644
--- a/arch/tile/kernel/smpboot.c
+++ b/arch/tile/kernel/smpboot.c
@@ -196,6 +196,8 @@ void __cpuinit online_secondary(void)
 	/* This must be done before setting cpu_online_mask */
 	wmb();
 
+	notify_cpu_starting(smp_processor_id());
+
 	/*
 	 * We need to hold call_lock, so there is no inconsistency
 	 * between the time smp_call_function() determines number of
diff --git a/arch/um/drivers/cow.h b/arch/um/drivers/cow.h
index dc36b222100b..6673508f3426 100644
--- a/arch/um/drivers/cow.h
+++ b/arch/um/drivers/cow.h
@@ -3,41 +3,6 @@
 
 #include <asm/types.h>
 
-#if defined(__KERNEL__)
-
-# include <asm/byteorder.h>
-
-# if defined(__BIG_ENDIAN)
-#	define ntohll(x) (x)
-#	define htonll(x) (x)
-# elif defined(__LITTLE_ENDIAN)
-#	define ntohll(x)  be64_to_cpu(x)
-#	define htonll(x)  cpu_to_be64(x)
-# else
-#	error "Could not determine byte order"
-# endif
-
-#else
-/* For the definition of ntohl, htonl and __BYTE_ORDER */
-#include <endian.h>
-#include <netinet/in.h>
-#if defined(__BYTE_ORDER)
-
-#  if __BYTE_ORDER == __BIG_ENDIAN
-#	define ntohll(x) (x)
-#	define htonll(x) (x)
-#  elif __BYTE_ORDER == __LITTLE_ENDIAN
-#	define ntohll(x)  bswap_64(x)
-#	define htonll(x)  bswap_64(x)
-#  else
-#	error "Could not determine byte order: __BYTE_ORDER uncorrectly defined"
-#  endif
-
-#else  /* ! defined(__BYTE_ORDER) */
-#	error "Could not determine byte order: __BYTE_ORDER not defined"
-#endif
-#endif /* ! defined(__KERNEL__) */
-
 extern int init_cow_file(int fd, char *cow_file, char *backing_file,
 			 int sectorsize, int alignment, int *bitmap_offset_out,
 			 unsigned long *bitmap_len_out, int *data_offset_out);
diff --git a/arch/um/drivers/cow_user.c b/arch/um/drivers/cow_user.c
index 9cbb426c0b91..0ee9cc6cc4c7 100644
--- a/arch/um/drivers/cow_user.c
+++ b/arch/um/drivers/cow_user.c
@@ -8,11 +8,10 @@
  * that.
  */
 #include <unistd.h>
-#include <byteswap.h>
 #include <errno.h>
 #include <string.h>
 #include <arpa/inet.h>
-#include <asm/types.h>
+#include <endian.h>
 #include "cow.h"
 #include "cow_sys.h"
 
@@ -214,8 +213,8 @@ int write_cow_header(char *cow_file, int fd, char *backing_file,
 			   "header\n");
 		goto out;
 	}
-	header->magic = htonl(COW_MAGIC);
-	header->version = htonl(COW_VERSION);
+	header->magic = htobe32(COW_MAGIC);
+	header->version = htobe32(COW_VERSION);
 
 	err = -EINVAL;
 	if (strlen(backing_file) > sizeof(header->backing_file) - 1) {
@@ -246,10 +245,10 @@ int write_cow_header(char *cow_file, int fd, char *backing_file,
 		goto out_free;
 	}
 
-	header->mtime = htonl(modtime);
-	header->size = htonll(*size);
-	header->sectorsize = htonl(sectorsize);
-	header->alignment = htonl(alignment);
+	header->mtime = htobe32(modtime);
+	header->size = htobe64(*size);
+	header->sectorsize = htobe32(sectorsize);
+	header->alignment = htobe32(alignment);
 	header->cow_format = COW_BITMAP;
 
 	err = cow_write_file(fd, header, sizeof(*header));
@@ -301,8 +300,8 @@ int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg,
 	magic = header->v1.magic;
 	if (magic == COW_MAGIC)
 		version = header->v1.version;
-	else if (magic == ntohl(COW_MAGIC))
-		version = ntohl(header->v1.version);
+	else if (magic == be32toh(COW_MAGIC))
+		version = be32toh(header->v1.version);
 	/* No error printed because the non-COW case comes through here */
 	else goto out;
 
@@ -327,9 +326,9 @@ int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg,
 				   "header\n");
 			goto out;
 		}
-		*mtime_out = ntohl(header->v2.mtime);
-		*size_out = ntohll(header->v2.size);
-		*sectorsize_out = ntohl(header->v2.sectorsize);
+		*mtime_out = be32toh(header->v2.mtime);
+		*size_out = be64toh(header->v2.size);
+		*sectorsize_out = be32toh(header->v2.sectorsize);
 		*bitmap_offset_out = sizeof(header->v2);
 		*align_out = *sectorsize_out;
 		file = header->v2.backing_file;
@@ -341,10 +340,10 @@ int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg,
 				   "header\n");
 			goto out;
 		}
-		*mtime_out = ntohl(header->v3.mtime);
-		*size_out = ntohll(header->v3.size);
-		*sectorsize_out = ntohl(header->v3.sectorsize);
-		*align_out = ntohl(header->v3.alignment);
+		*mtime_out = be32toh(header->v3.mtime);
+		*size_out = be64toh(header->v3.size);
+		*sectorsize_out = be32toh(header->v3.sectorsize);
+		*align_out = be32toh(header->v3.alignment);
 		if (*align_out == 0) {
 			cow_printf("read_cow_header - invalid COW header, "
 				   "align == 0\n");
@@ -366,16 +365,16 @@ int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg,
 		 * this was used until Dec2005 - 64bits are needed to represent
 		 * 2038+. I.e. we can safely do this truncating cast.
 		 *
-		 * Additionally, we must use ntohl() instead of ntohll(), since
+		 * Additionally, we must use be32toh() instead of be64toh(), since
 		 * the program used to use the former (tested - I got mtime
 		 * mismatch "0 vs whatever").
 		 *
 		 * Ever heard about bug-to-bug-compatibility ? ;-) */
-		*mtime_out = (time32_t) ntohl(header->v3_b.mtime);
+		*mtime_out = (time32_t) be32toh(header->v3_b.mtime);
 
-		*size_out = ntohll(header->v3_b.size);
-		*sectorsize_out = ntohl(header->v3_b.sectorsize);
-		*align_out = ntohl(header->v3_b.alignment);
+		*size_out = be64toh(header->v3_b.size);
+		*sectorsize_out = be32toh(header->v3_b.sectorsize);
+		*align_out = be32toh(header->v3_b.alignment);
 		if (*align_out == 0) {
 			cow_printf("read_cow_header - invalid COW header, "
 				   "align == 0\n");
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index e672bd6d43e3..43b39d61b538 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -22,6 +22,7 @@
 #include <linux/workqueue.h>
 #include <linux/mutex.h>
 #include <asm/uaccess.h>
+#include <asm/switch_to.h>
 
 #include "init.h"
 #include "irq_kern.h"
diff --git a/arch/um/include/asm/Kbuild b/arch/um/include/asm/Kbuild
index 8419f5cf2ac7..fff24352255d 100644
--- a/arch/um/include/asm/Kbuild
+++ b/arch/um/include/asm/Kbuild
@@ -1,3 +1,4 @@
 generic-y += bug.h cputime.h device.h emergency-restart.h futex.h hardirq.h
 generic-y += hw_irq.h irq_regs.h kdebug.h percpu.h sections.h topology.h xor.h
-generic-y += ftrace.h pci.h io.h param.h delay.h mutex.h current.h
+generic-y += ftrace.h pci.h io.h param.h delay.h mutex.h current.h exec.h
+generic-y += switch_to.h
diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile
index 492bc4c1b62b..65a1c3d690ea 100644
--- a/arch/um/kernel/Makefile
+++ b/arch/um/kernel/Makefile
@@ -3,9 +3,10 @@
 # Licensed under the GPL
 #
 
-CPPFLAGS_vmlinux.lds := -DSTART=$(LDS_START) \
-                        -DELF_ARCH=$(LDS_ELF_ARCH)        \
-                        -DELF_FORMAT=$(LDS_ELF_FORMAT)
+CPPFLAGS_vmlinux.lds := -DSTART=$(LDS_START)		\
+                        -DELF_ARCH=$(LDS_ELF_ARCH)	\
+                        -DELF_FORMAT=$(LDS_ELF_FORMAT)	\
+			$(LDS_EXTRA)
 extra-y := vmlinux.lds
 clean-files :=
 
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index f386d04a84a5..2b73dedb44ca 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -88,11 +88,8 @@ static inline void set_current(struct task_struct *task)
 
 extern void arch_switch_to(struct task_struct *to);
 
-void *_switch_to(void *prev, void *next, void *last)
+void *__switch_to(struct task_struct *from, struct task_struct *to)
 {
-	struct task_struct *from = prev;
-	struct task_struct *to = next;
-
 	to->thread.prev_sched = from;
 	set_current(to);
 
@@ -111,7 +108,6 @@ void *_switch_to(void *prev, void *next, void *last)
 	} while (current->thread.saved_task);
 
 	return current->thread.prev_sched;
-
 }
 
 void interrupt_end(void)
diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c
index 4947b319f53a..0a49ef0c2bf4 100644
--- a/arch/um/kernel/skas/mmu.c
+++ b/arch/um/kernel/skas/mmu.c
@@ -103,7 +103,6 @@ int init_new_context(struct task_struct *task, struct mm_struct *mm)
 
 void uml_setup_stubs(struct mm_struct *mm)
 {
-	struct page **pages;
 	int err, ret;
 
 	if (!skas_needs_stub)
diff --git a/arch/x86/Makefile.um b/arch/x86/Makefile.um
index 4be406abeefd..36b62bc52638 100644
--- a/arch/x86/Makefile.um
+++ b/arch/x86/Makefile.um
@@ -14,6 +14,9 @@ LINK-y			+= $(call cc-option,-m32)
 
 export LDFLAGS
 
+LDS_EXTRA		:= -Ui386
+export LDS_EXTRA
+
 # First of all, tune CFLAGS for the specific CPU. This actually sets cflags-y.
 include $(srctree)/arch/x86/Makefile_32.cpu
 
diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h
index b3b733262909..99480e55973d 100644
--- a/arch/x86/include/asm/cmpxchg.h
+++ b/arch/x86/include/asm/cmpxchg.h
@@ -43,7 +43,7 @@ extern void __add_wrong_size(void)
 		switch (sizeof(*(ptr))) {				\
 		case __X86_CASE_B:					\
 			asm volatile (lock #op "b %b0, %1\n"		\
-				      : "+r" (__ret), "+m" (*(ptr))	\
+				      : "+q" (__ret), "+m" (*(ptr))	\
 				      : : "memory", "cc");		\
 			break;						\
 		case __X86_CASE_W:					\
@@ -173,7 +173,7 @@ extern void __add_wrong_size(void)
 		switch (sizeof(*(ptr))) {				\
 		case __X86_CASE_B:					\
 			asm volatile (lock "addb %b1, %0\n"		\
-				      : "+m" (*(ptr)) : "ri" (inc)	\
+				      : "+m" (*(ptr)) : "qi" (inc)	\
 				      : "memory", "cc");		\
 			break;						\
 		case __X86_CASE_W:					\
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 8be5f54d9360..e0544597cfe7 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -557,6 +557,8 @@ struct __large_struct { unsigned long buf[100]; };
 
 extern unsigned long
 copy_from_user_nmi(void *to, const void __user *from, unsigned long n);
+extern __must_check long
+strncpy_from_user(char *dst, const char __user *src, long count);
 
 /*
  * movsl can be slow when source and dest are not both 8-byte aligned
diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h
index 566e803cc602..8084bc73b18c 100644
--- a/arch/x86/include/asm/uaccess_32.h
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -213,11 +213,6 @@ static inline unsigned long __must_check copy_from_user(void *to,
 	return n;
 }
 
-long __must_check strncpy_from_user(char *dst, const char __user *src,
-				    long count);
-long __must_check __strncpy_from_user(char *dst,
-				      const char __user *src, long count);
-
 /**
  * strlen_user: - Get the size of a string in user space.
  * @str: The string to measure.
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 1c66d30971ad..fcd4b6f3ef02 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -208,10 +208,6 @@ int __copy_in_user(void __user *dst, const void __user *src, unsigned size)
 	}
 }
 
-__must_check long
-strncpy_from_user(char *dst, const char __user *src, long count);
-__must_check long
-__strncpy_from_user(char *dst, const char __user *src, long count);
 __must_check long strnlen_user(const char __user *str, long n);
 __must_check long __strnlen_user(const char __user *str, long n);
 __must_check long strlen_user(const char __user *str);
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index f386dc49f988..7515cf0e1805 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -216,9 +216,9 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
 	current_thread_info()->sig_on_uaccess_error = 1;
 
 	/*
-	 * 0 is a valid user pointer (in the access_ok sense) on 32-bit and
+	 * NULL is a valid user pointer (in the access_ok sense) on 32-bit and
 	 * 64-bit, so we don't need to special-case it here.  For all the
-	 * vsyscalls, 0 means "don't write anything" not "write it at
+	 * vsyscalls, NULL means "don't write anything" not "write it at
 	 * address 0".
 	 */
 	ret = -EFAULT;
@@ -247,7 +247,7 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
 
 		ret = sys_getcpu((unsigned __user *)regs->di,
 				 (unsigned __user *)regs->si,
-				 0);
+				 NULL);
 		break;
 	}
 
diff --git a/arch/x86/lib/usercopy.c b/arch/x86/lib/usercopy.c
index 97be9cb54483..d6ae30bbd7bb 100644
--- a/arch/x86/lib/usercopy.c
+++ b/arch/x86/lib/usercopy.c
@@ -7,6 +7,8 @@
 #include <linux/highmem.h>
 #include <linux/module.h>
 
+#include <asm/word-at-a-time.h>
+
 /*
  * best effort, GUP based copy_from_user() that is NMI-safe
  */
@@ -41,3 +43,104 @@ copy_from_user_nmi(void *to, const void __user *from, unsigned long n)
 	return len;
 }
 EXPORT_SYMBOL_GPL(copy_from_user_nmi);
+
+static inline unsigned long count_bytes(unsigned long mask)
+{
+	mask = (mask - 1) & ~mask;
+	mask >>= 7;
+	return count_masked_bytes(mask);
+}
+
+/*
+ * Do a strncpy, return length of string without final '\0'.
+ * 'count' is the user-supplied count (return 'count' if we
+ * hit it), 'max' is the address space maximum (and we return
+ * -EFAULT if we hit it).
+ */
+static inline long do_strncpy_from_user(char *dst, const char __user *src, long count, unsigned long max)
+{
+	long res = 0;
+
+	/*
+	 * Truncate 'max' to the user-specified limit, so that
+	 * we only have one limit we need to check in the loop
+	 */
+	if (max > count)
+		max = count;
+
+	while (max >= sizeof(unsigned long)) {
+		unsigned long c;
+
+		/* Fall back to byte-at-a-time if we get a page fault */
+		if (unlikely(__get_user(c,(unsigned long __user *)(src+res))))
+			break;
+		/* This can write a few bytes past the NUL character, but that's ok */
+		*(unsigned long *)(dst+res) = c;
+		c = has_zero(c);
+		if (c)
+			return res + count_bytes(c);
+		res += sizeof(unsigned long);
+		max -= sizeof(unsigned long);
+	}
+
+	while (max) {
+		char c;
+
+		if (unlikely(__get_user(c,src+res)))
+			return -EFAULT;
+		dst[res] = c;
+		if (!c)
+			return res;
+		res++;
+		max--;
+	}
+
+	/*
+	 * Uhhuh. We hit 'max'. But was that the user-specified maximum
+	 * too? If so, that's ok - we got as much as the user asked for.
+	 */
+	if (res >= count)
+		return res;
+
+	/*
+	 * Nope: we hit the address space limit, and we still had more
+	 * characters the caller would have wanted. That's an EFAULT.
+	 */
+	return -EFAULT;
+}
+
+/**
+ * strncpy_from_user: - Copy a NUL terminated string from userspace.
+ * @dst:   Destination address, in kernel space.  This buffer must be at
+ *         least @count bytes long.
+ * @src:   Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	unsigned long max_addr, src_addr;
+
+	if (unlikely(count <= 0))
+		return 0;
+
+	max_addr = current_thread_info()->addr_limit.seg;
+	src_addr = (unsigned long)src;
+	if (likely(src_addr < max_addr)) {
+		unsigned long max = max_addr - src_addr;
+		return do_strncpy_from_user(dst, src, count, max);
+	}
+	return -EFAULT;
+}
+EXPORT_SYMBOL(strncpy_from_user);
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index d9b094ca7aaa..ef2a6a5d78e3 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -33,93 +33,6 @@ static inline int __movsl_is_ok(unsigned long a1, unsigned long a2, unsigned lon
 	__movsl_is_ok((unsigned long)(a1), (unsigned long)(a2), (n))
 
 /*
- * Copy a null terminated string from userspace.
- */
-
-#define __do_strncpy_from_user(dst, src, count, res)			   \
-do {									   \
-	int __d0, __d1, __d2;						   \
-	might_fault();							   \
-	__asm__ __volatile__(						   \
-		"	testl %1,%1\n"					   \
-		"	jz 2f\n"					   \
-		"0:	lodsb\n"					   \
-		"	stosb\n"					   \
-		"	testb %%al,%%al\n"				   \
-		"	jz 1f\n"					   \
-		"	decl %1\n"					   \
-		"	jnz 0b\n"					   \
-		"1:	subl %1,%0\n"					   \
-		"2:\n"							   \
-		".section .fixup,\"ax\"\n"				   \
-		"3:	movl %5,%0\n"					   \
-		"	jmp 2b\n"					   \
-		".previous\n"						   \
-		_ASM_EXTABLE(0b,3b)					   \
-		: "=&d"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1),	   \
-		  "=&D" (__d2)						   \
-		: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
-		: "memory");						   \
-} while (0)
-
-/**
- * __strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking.
- * @dst:   Destination address, in kernel space.  This buffer must be at
- *         least @count bytes long.
- * @src:   Source address, in user space.
- * @count: Maximum number of bytes to copy, including the trailing NUL.
- *
- * Copies a NUL-terminated string from userspace to kernel space.
- * Caller must check the specified block with access_ok() before calling
- * this function.
- *
- * On success, returns the length of the string (not including the trailing
- * NUL).
- *
- * If access to userspace fails, returns -EFAULT (some data may have been
- * copied).
- *
- * If @count is smaller than the length of the string, copies @count bytes
- * and returns @count.
- */
-long
-__strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res;
-	__do_strncpy_from_user(dst, src, count, res);
-	return res;
-}
-EXPORT_SYMBOL(__strncpy_from_user);
-
-/**
- * strncpy_from_user: - Copy a NUL terminated string from userspace.
- * @dst:   Destination address, in kernel space.  This buffer must be at
- *         least @count bytes long.
- * @src:   Source address, in user space.
- * @count: Maximum number of bytes to copy, including the trailing NUL.
- *
- * Copies a NUL-terminated string from userspace to kernel space.
- *
- * On success, returns the length of the string (not including the trailing
- * NUL).
- *
- * If access to userspace fails, returns -EFAULT (some data may have been
- * copied).
- *
- * If @count is smaller than the length of the string, copies @count bytes
- * and returns @count.
- */
-long
-strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res = -EFAULT;
-	if (access_ok(VERIFY_READ, src, 1))
-		__do_strncpy_from_user(dst, src, count, res);
-	return res;
-}
-EXPORT_SYMBOL(strncpy_from_user);
-
-/*
  * Zero Userspace
  */
 
diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
index b7c2849ffb66..0d0326f388c0 100644
--- a/arch/x86/lib/usercopy_64.c
+++ b/arch/x86/lib/usercopy_64.c
@@ -9,55 +9,6 @@
 #include <asm/uaccess.h>
 
 /*
- * Copy a null terminated string from userspace.
- */
-
-#define __do_strncpy_from_user(dst,src,count,res)			   \
-do {									   \
-	long __d0, __d1, __d2;						   \
-	might_fault();							   \
-	__asm__ __volatile__(						   \
-		"	testq %1,%1\n"					   \
-		"	jz 2f\n"					   \
-		"0:	lodsb\n"					   \
-		"	stosb\n"					   \
-		"	testb %%al,%%al\n"				   \
-		"	jz 1f\n"					   \
-		"	decq %1\n"					   \
-		"	jnz 0b\n"					   \
-		"1:	subq %1,%0\n"					   \
-		"2:\n"							   \
-		".section .fixup,\"ax\"\n"				   \
-		"3:	movq %5,%0\n"					   \
-		"	jmp 2b\n"					   \
-		".previous\n"						   \
-		_ASM_EXTABLE(0b,3b)					   \
-		: "=&r"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1),	   \
-		  "=&D" (__d2)						   \
-		: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
-		: "memory");						   \
-} while (0)
-
-long
-__strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res;
-	__do_strncpy_from_user(dst, src, count, res);
-	return res;
-}
-EXPORT_SYMBOL(__strncpy_from_user);
-
-long
-strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res = -EFAULT;
-	if (access_ok(VERIFY_READ, src, 1))
-		return __strncpy_from_user(dst, src, count);
-	return res;
-}
-EXPORT_SYMBOL(strncpy_from_user);
-
-/*
  * Zero Userspace
  */
 
diff --git a/arch/x86/um/asm/barrier.h b/arch/x86/um/asm/barrier.h
new file mode 100644
index 000000000000..7d01b8c56c00
--- /dev/null
+++ b/arch/x86/um/asm/barrier.h
@@ -0,0 +1,75 @@
+#ifndef _ASM_UM_BARRIER_H_
+#define _ASM_UM_BARRIER_H_
+
+#include <asm/asm.h>
+#include <asm/segment.h>
+#include <asm/cpufeature.h>
+#include <asm/cmpxchg.h>
+#include <asm/nops.h>
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ */
+#ifdef CONFIG_X86_32
+
+#define mb()	alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
+#define rmb()	alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
+#define wmb()	alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
+
+#else /* CONFIG_X86_32 */
+
+#define mb()	asm volatile("mfence" : : : "memory")
+#define rmb()	asm volatile("lfence" : : : "memory")
+#define wmb()	asm volatile("sfence" : : : "memory")
+
+#endif /* CONFIG_X86_32 */
+
+#define read_barrier_depends()	do { } while (0)
+
+#ifdef CONFIG_SMP
+
+#define smp_mb()	mb()
+#ifdef CONFIG_X86_PPRO_FENCE
+#define smp_rmb()	rmb()
+#else /* CONFIG_X86_PPRO_FENCE */
+#define smp_rmb()	barrier()
+#endif /* CONFIG_X86_PPRO_FENCE */
+
+#ifdef CONFIG_X86_OOSTORE
+#define smp_wmb()	wmb()
+#else /* CONFIG_X86_OOSTORE */
+#define smp_wmb()	barrier()
+#endif /* CONFIG_X86_OOSTORE */
+
+#define smp_read_barrier_depends()	read_barrier_depends()
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+
+#else /* CONFIG_SMP */
+
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while (0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
+
+#endif /* CONFIG_SMP */
+
+/*
+ * Stop RDTSC speculation. This is needed when you need to use RDTSC
+ * (or get_cycles or vread that possibly accesses the TSC) in a defined
+ * code region.
+ *
+ * (Could use an alternative three way for this if there was one.)
+ */
+static inline void rdtsc_barrier(void)
+{
+	alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
+	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
+}
+
+#endif
diff --git a/arch/x86/um/asm/system.h b/arch/x86/um/asm/system.h
deleted file mode 100644
index a459fd9b7598..000000000000
--- a/arch/x86/um/asm/system.h
+++ /dev/null
@@ -1,135 +0,0 @@
-#ifndef _ASM_X86_SYSTEM_H_
-#define _ASM_X86_SYSTEM_H_
-
-#include <asm/asm.h>
-#include <asm/segment.h>
-#include <asm/cpufeature.h>
-#include <asm/cmpxchg.h>
-#include <asm/nops.h>
-
-#include <linux/kernel.h>
-#include <linux/irqflags.h>
-
-/* entries in ARCH_DLINFO: */
-#ifdef CONFIG_IA32_EMULATION
-# define AT_VECTOR_SIZE_ARCH 2
-#else
-# define AT_VECTOR_SIZE_ARCH 1
-#endif
-
-extern unsigned long arch_align_stack(unsigned long sp);
-
-void default_idle(void);
-
-/*
- * Force strict CPU ordering.
- * And yes, this is required on UP too when we're talking
- * to devices.
- */
-#ifdef CONFIG_X86_32
-/*
- * Some non-Intel clones support out of order store. wmb() ceases to be a
- * nop for these.
- */
-#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
-#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
-#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
-#else
-#define mb() 	asm volatile("mfence":::"memory")
-#define rmb()	asm volatile("lfence":::"memory")
-#define wmb()	asm volatile("sfence" ::: "memory")
-#endif
-
-/**
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier.  All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads.  This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies.  See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	b = 2;
- *	memory_barrier();
- *	p = &b;				q = p;
- *					read_barrier_depends();
- *					d = *q;
- * </programlisting>
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends().  However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	a = 2;
- *	memory_barrier();
- *	b = 3;				y = b;
- *					read_barrier_depends();
- *					x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b".  Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
- * in cases like this where there are no data dependencies.
- **/
-
-#define read_barrier_depends()	do { } while (0)
-
-#ifdef CONFIG_SMP
-#define smp_mb()	mb()
-#ifdef CONFIG_X86_PPRO_FENCE
-# define smp_rmb()	rmb()
-#else
-# define smp_rmb()	barrier()
-#endif
-#ifdef CONFIG_X86_OOSTORE
-# define smp_wmb() 	wmb()
-#else
-# define smp_wmb()	barrier()
-#endif
-#define smp_read_barrier_depends()	read_barrier_depends()
-#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
-#else
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while (0)
-#define set_mb(var, value) do { var = value; barrier(); } while (0)
-#endif
-
-/*
- * Stop RDTSC speculation. This is needed when you need to use RDTSC
- * (or get_cycles or vread that possibly accesses the TSC) in a defined
- * code region.
- *
- * (Could use an alternative three way for this if there was one.)
- */
-static inline void rdtsc_barrier(void)
-{
-	alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
-	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
-}
-
-extern void *_switch_to(void *prev, void *next, void *last);
-#define switch_to(prev, next, last) prev = _switch_to(prev, next, last)
-
-#endif
author	Arnd Bergmann <arnd@arndb.de>	2012-04-22 22:22:34 +0200
committer	Arnd Bergmann <arnd@arndb.de>	2012-04-22 22:28:48 +0200
commit	6540afeae0c66c99c24d43446dab90836170a4e6 (patch)
tree	9d4ed5065c9ad95ad8bc4a26a6f5924e83019acd /arch
parent	17d2f847e6aa1181024cb881fdc6cbad18f11b04 (diff)
parent	39ecc143b4c1f3d42e8300e7f5274681b99f95c2 (diff)
download	linux-6540afeae0c66c99c24d43446dab90836170a4e6.tar.bz2