summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-06-04 19:17:47 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-06-04 19:17:47 -0700
commit0afe832e55a70f4bc5e725db400779b4f620290c (patch)
treea656975173d7ed2cc65ef3cf38c16be48c81b85a /arch
parent42964c6f6261f6b44bb43cabc93ac9e39b5a9a54 (diff)
parent844ea8f62619ac2a5e47d13e3449ac197067b414 (diff)
downloadlinux-0afe832e55a70f4bc5e725db400779b4f620290c.tar.bz2
Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar: "Misc cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apm: Fix spelling mistake: "caculate" -> "calculate" x86/mtrr: Rename main.c to mtrr.c and remove duplicate prefixes x86: Remove pr_fmt duplicate logging prefixes x86/early-quirks: Rename duplicate define of dev_err x86/bpf: Clean up non-standard comments, to make the code more readable
Diffstat (limited to 'arch')
-rw-r--r--arch/x86/events/amd/ibs.c2
-rw-r--r--arch/x86/kernel/apm_32.c2
-rw-r--r--arch/x86/kernel/cpu/mtrr/Makefile2
-rw-r--r--arch/x86/kernel/cpu/mtrr/mtrr.c (renamed from arch/x86/kernel/cpu/mtrr/main.c)33
-rw-r--r--arch/x86/kernel/e820.c32
-rw-r--r--arch/x86/kernel/early-quirks.c8
-rw-r--r--arch/x86/kernel/hpet.c5
-rw-r--r--arch/x86/kernel/uprobes.c4
-rw-r--r--arch/x86/mm/numa.c22
-rw-r--r--arch/x86/net/bpf_jit_comp.c233
10 files changed, 188 insertions, 155 deletions
diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c
index 786fd875de92..4b98101209a1 100644
--- a/arch/x86/events/amd/ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -889,7 +889,7 @@ static void force_ibs_eilvt_setup(void)
if (!ibs_eilvt_valid())
goto out;
- pr_info("IBS: LVT offset %d assigned\n", offset);
+ pr_info("LVT offset %d assigned\n", offset);
return;
out:
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index cadeafabf167..5d0de79fdab0 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -2433,7 +2433,7 @@ MODULE_PARM_DESC(idle_threshold,
"System idle percentage above which to make APM BIOS idle calls");
module_param(idle_period, int, 0444);
MODULE_PARM_DESC(idle_period,
- "Period (in sec/100) over which to caculate the idle percentage");
+ "Period (in sec/100) over which to calculate the idle percentage");
module_param(smp, bool, 0444);
MODULE_PARM_DESC(smp,
"Set this to enable APM use on an SMP platform. Use with caution on older systems");
diff --git a/arch/x86/kernel/cpu/mtrr/Makefile b/arch/x86/kernel/cpu/mtrr/Makefile
index ad9e5ed81181..2ad9107ee980 100644
--- a/arch/x86/kernel/cpu/mtrr/Makefile
+++ b/arch/x86/kernel/cpu/mtrr/Makefile
@@ -1,3 +1,3 @@
-obj-y := main.o if.o generic.o cleanup.o
+obj-y := mtrr.o if.o generic.o cleanup.o
obj-$(CONFIG_X86_32) += amd.o cyrix.o centaur.o
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/mtrr.c
index 3ea0047beb40..9a19c800fe40 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.c
@@ -101,7 +101,7 @@ static int have_wrcomb(void)
if (dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
dev->device == PCI_DEVICE_ID_SERVERWORKS_LE &&
dev->revision <= 5) {
- pr_info("mtrr: Serverworks LE rev < 6 detected. Write-combining disabled.\n");
+ pr_info("Serverworks LE rev < 6 detected. Write-combining disabled.\n");
pci_dev_put(dev);
return 0;
}
@@ -111,7 +111,7 @@ static int have_wrcomb(void)
*/
if (dev->vendor == PCI_VENDOR_ID_INTEL &&
dev->device == PCI_DEVICE_ID_INTEL_82451NX) {
- pr_info("mtrr: Intel 450NX MMC detected. Write-combining disabled.\n");
+ pr_info("Intel 450NX MMC detected. Write-combining disabled.\n");
pci_dev_put(dev);
return 0;
}
@@ -313,24 +313,24 @@ int mtrr_add_page(unsigned long base, unsigned long size,
return error;
if (type >= MTRR_NUM_TYPES) {
- pr_warn("mtrr: type: %u invalid\n", type);
+ pr_warn("type: %u invalid\n", type);
return -EINVAL;
}
/* If the type is WC, check that this processor supports it */
if ((type == MTRR_TYPE_WRCOMB) && !have_wrcomb()) {
- pr_warn("mtrr: your processor doesn't support write-combining\n");
+ pr_warn("your processor doesn't support write-combining\n");
return -ENOSYS;
}
if (!size) {
- pr_warn("mtrr: zero sized request\n");
+ pr_warn("zero sized request\n");
return -EINVAL;
}
if ((base | (base + size - 1)) >>
(boot_cpu_data.x86_phys_bits - PAGE_SHIFT)) {
- pr_warn("mtrr: base or size exceeds the MTRR width\n");
+ pr_warn("base or size exceeds the MTRR width\n");
return -EINVAL;
}
@@ -361,8 +361,7 @@ int mtrr_add_page(unsigned long base, unsigned long size,
} else if (types_compatible(type, ltype))
continue;
}
- pr_warn("mtrr: 0x%lx000,0x%lx000 overlaps existing"
- " 0x%lx000,0x%lx000\n", base, size, lbase,
+ pr_warn("0x%lx000,0x%lx000 overlaps existing 0x%lx000,0x%lx000\n", base, size, lbase,
lsize);
goto out;
}
@@ -370,7 +369,7 @@ int mtrr_add_page(unsigned long base, unsigned long size,
if (ltype != type) {
if (types_compatible(type, ltype))
continue;
- pr_warn("mtrr: type mismatch for %lx000,%lx000 old: %s new: %s\n",
+ pr_warn("type mismatch for %lx000,%lx000 old: %s new: %s\n",
base, size, mtrr_attrib_to_str(ltype),
mtrr_attrib_to_str(type));
goto out;
@@ -396,7 +395,7 @@ int mtrr_add_page(unsigned long base, unsigned long size,
}
}
} else {
- pr_info("mtrr: no more MTRRs available\n");
+ pr_info("no more MTRRs available\n");
}
error = i;
out:
@@ -408,8 +407,8 @@ int mtrr_add_page(unsigned long base, unsigned long size,
static int mtrr_check(unsigned long base, unsigned long size)
{
if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) {
- pr_warn("mtrr: size and base must be multiples of 4 kiB\n");
- pr_debug("mtrr: size: 0x%lx base: 0x%lx\n", size, base);
+ pr_warn("size and base must be multiples of 4 kiB\n");
+ pr_debug("size: 0x%lx base: 0x%lx\n", size, base);
dump_stack();
return -1;
}
@@ -500,22 +499,22 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size)
}
}
if (reg < 0) {
- pr_debug("mtrr: no MTRR for %lx000,%lx000 found\n",
+ pr_debug("no MTRR for %lx000,%lx000 found\n",
base, size);
goto out;
}
}
if (reg >= max) {
- pr_warn("mtrr: register: %d too big\n", reg);
+ pr_warn("register: %d too big\n", reg);
goto out;
}
mtrr_if->get(reg, &lbase, &lsize, &ltype);
if (lsize < 1) {
- pr_warn("mtrr: MTRR %d not used\n", reg);
+ pr_warn("MTRR %d not used\n", reg);
goto out;
}
if (mtrr_usage_table[reg] < 1) {
- pr_warn("mtrr: reg: %d has count=0\n", reg);
+ pr_warn("reg: %d has count=0\n", reg);
goto out;
}
if (--mtrr_usage_table[reg] < 1)
@@ -776,7 +775,7 @@ void __init mtrr_bp_init(void)
}
if (!mtrr_enabled()) {
- pr_info("MTRR: Disabled\n");
+ pr_info("Disabled\n");
/*
* PAT initialization relies on MTRR's rendezvous handler.
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 6a2cb1442e05..d1f25c831447 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -155,7 +155,8 @@ static void __init __e820__range_add(struct e820_table *table, u64 start, u64 si
int x = table->nr_entries;
if (x >= ARRAY_SIZE(table->entries)) {
- pr_err("e820: too many entries; ignoring [mem %#010llx-%#010llx]\n", start, start + size - 1);
+ pr_err("too many entries; ignoring [mem %#010llx-%#010llx]\n",
+ start, start + size - 1);
return;
}
@@ -190,9 +191,10 @@ void __init e820__print_table(char *who)
int i;
for (i = 0; i < e820_table->nr_entries; i++) {
- pr_info("%s: [mem %#018Lx-%#018Lx] ", who,
- e820_table->entries[i].addr,
- e820_table->entries[i].addr + e820_table->entries[i].size - 1);
+ pr_info("%s: [mem %#018Lx-%#018Lx] ",
+ who,
+ e820_table->entries[i].addr,
+ e820_table->entries[i].addr + e820_table->entries[i].size - 1);
e820_print_type(e820_table->entries[i].type);
pr_cont("\n");
@@ -574,7 +576,7 @@ void __init e820__update_table_print(void)
if (e820__update_table(e820_table))
return;
- pr_info("e820: modified physical RAM map:\n");
+ pr_info("modified physical RAM map:\n");
e820__print_table("modified");
}
@@ -636,9 +638,8 @@ __init void e820__setup_pci_gap(void)
if (!found) {
#ifdef CONFIG_X86_64
gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
- pr_err(
- "e820: Cannot find an available gap in the 32-bit address range\n"
- "e820: PCI devices with unassigned 32-bit BARs may not work!\n");
+ pr_err("Cannot find an available gap in the 32-bit address range\n");
+ pr_err("PCI devices with unassigned 32-bit BARs may not work!\n");
#else
gapstart = 0x10000000;
#endif
@@ -649,7 +650,8 @@ __init void e820__setup_pci_gap(void)
*/
pci_mem_start = gapstart;
- pr_info("e820: [mem %#010lx-%#010lx] available for PCI devices\n", gapstart, gapstart + gapsize - 1);
+ pr_info("[mem %#010lx-%#010lx] available for PCI devices\n",
+ gapstart, gapstart + gapsize - 1);
}
/*
@@ -711,7 +713,7 @@ void __init e820__memory_setup_extended(u64 phys_addr, u32 data_len)
memcpy(e820_table_firmware, e820_table, sizeof(*e820_table_firmware));
early_memunmap(sdata, data_len);
- pr_info("e820: extended physical RAM map:\n");
+ pr_info("extended physical RAM map:\n");
e820__print_table("extended");
}
@@ -780,7 +782,7 @@ u64 __init e820__memblock_alloc_reserved(u64 size, u64 align)
addr = __memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);
if (addr) {
e820__range_update_kexec(addr, size, E820_TYPE_RAM, E820_TYPE_RESERVED);
- pr_info("e820: update e820_table_kexec for e820__memblock_alloc_reserved()\n");
+ pr_info("update e820_table_kexec for e820__memblock_alloc_reserved()\n");
e820__update_table_kexec();
}
@@ -830,8 +832,8 @@ static unsigned long __init e820_end_pfn(unsigned long limit_pfn, enum e820_type
if (last_pfn > max_arch_pfn)
last_pfn = max_arch_pfn;
- pr_info("e820: last_pfn = %#lx max_arch_pfn = %#lx\n",
- last_pfn, max_arch_pfn);
+ pr_info("last_pfn = %#lx max_arch_pfn = %#lx\n",
+ last_pfn, max_arch_pfn);
return last_pfn;
}
@@ -1005,7 +1007,7 @@ void __init e820__finish_early_params(void)
if (e820__update_table(e820_table) < 0)
early_panic("Invalid user supplied memory map");
- pr_info("e820: user-defined physical RAM map:\n");
+ pr_info("user-defined physical RAM map:\n");
e820__print_table("user");
}
}
@@ -1238,7 +1240,7 @@ void __init e820__memory_setup(void)
memcpy(e820_table_kexec, e820_table, sizeof(*e820_table_kexec));
memcpy(e820_table_firmware, e820_table, sizeof(*e820_table_firmware));
- pr_info("e820: BIOS-provided physical RAM map:\n");
+ pr_info("BIOS-provided physical RAM map:\n");
e820__print_table(who);
}
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index bae0d32e327b..da5d8ac60062 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -28,8 +28,6 @@
#include <asm/irq_remapping.h>
#include <asm/early_ioremap.h>
-#define dev_err(msg) pr_err("pci 0000:%02x:%02x.%d: %s", bus, slot, func, msg)
-
static void __init fix_hypertransport_config(int num, int slot, int func)
{
u32 htcfg;
@@ -617,7 +615,8 @@ static void __init apple_airport_reset(int bus, int slot, int func)
pmcsr = read_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL);
if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) {
- dev_err("Cannot power up Apple AirPort card\n");
+ pr_err("pci 0000:%02x:%02x.%d: Cannot power up Apple AirPort card\n",
+ bus, slot, func);
return;
}
}
@@ -628,7 +627,8 @@ static void __init apple_airport_reset(int bus, int slot, int func)
mmio = early_ioremap(addr, BCM4331_MMIO_SIZE);
if (!mmio) {
- dev_err("Cannot iomap Apple AirPort card\n");
+ pr_err("pci 0000:%02x:%02x.%d: Cannot iomap Apple AirPort card\n",
+ bus, slot, func);
return;
}
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 8ce4212e2b8d..b6be34ee88e9 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -975,8 +975,7 @@ int __init hpet_enable(void)
cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY);
hpet_writel(cfg, HPET_CFG);
if (cfg)
- pr_warn("HPET: Unrecognized bits %#x set in global cfg\n",
- cfg);
+ pr_warn("Unrecognized bits %#x set in global cfg\n", cfg);
for (i = 0; i <= last; ++i) {
cfg = hpet_readl(HPET_Tn_CFG(i));
@@ -988,7 +987,7 @@ int __init hpet_enable(void)
| HPET_TN_64BIT_CAP | HPET_TN_32BIT | HPET_TN_ROUTE
| HPET_TN_FSB | HPET_TN_FSB_CAP);
if (cfg)
- pr_warn("HPET: Unrecognized bits %#x set in cfg#%u\n",
+ pr_warn("Unrecognized bits %#x set in cfg#%u\n",
cfg, i);
}
hpet_print_config();
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index c84bb5396958..58d8d800875d 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -1083,8 +1083,8 @@ arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs
return orig_ret_vaddr;
if (nleft != rasize) {
- pr_err("uprobe: return address clobbered: pid=%d, %%sp=%#lx, "
- "%%ip=%#lx\n", current->pid, regs->sp, regs->ip);
+ pr_err("return address clobbered: pid=%d, %%sp=%#lx, %%ip=%#lx\n",
+ current->pid, regs->sp, regs->ip);
force_sig_info(SIGSEGV, SEND_SIG_FORCED, current);
}
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 25504d5aa816..fa150855647c 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -136,13 +136,13 @@ static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
/* whine about and ignore invalid blks */
if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
- pr_warning("NUMA: Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
- nid, start, end - 1);
+ pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
+ nid, start, end - 1);
return 0;
}
if (mi->nr_blks >= NR_NODE_MEMBLKS) {
- pr_err("NUMA: too many memblk ranges\n");
+ pr_err("too many memblk ranges\n");
return -EINVAL;
}
@@ -267,14 +267,14 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
*/
if (bi->end > bj->start && bi->start < bj->end) {
if (bi->nid != bj->nid) {
- pr_err("NUMA: node %d [mem %#010Lx-%#010Lx] overlaps with node %d [mem %#010Lx-%#010Lx]\n",
+ pr_err("node %d [mem %#010Lx-%#010Lx] overlaps with node %d [mem %#010Lx-%#010Lx]\n",
bi->nid, bi->start, bi->end - 1,
bj->nid, bj->start, bj->end - 1);
return -EINVAL;
}
- pr_warning("NUMA: Warning: node %d [mem %#010Lx-%#010Lx] overlaps with itself [mem %#010Lx-%#010Lx]\n",
- bi->nid, bi->start, bi->end - 1,
- bj->start, bj->end - 1);
+ pr_warn("Warning: node %d [mem %#010Lx-%#010Lx] overlaps with itself [mem %#010Lx-%#010Lx]\n",
+ bi->nid, bi->start, bi->end - 1,
+ bj->start, bj->end - 1);
}
/*
@@ -364,7 +364,7 @@ static int __init numa_alloc_distance(void)
phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
size, PAGE_SIZE);
if (!phys) {
- pr_warning("NUMA: Warning: can't allocate distance table!\n");
+ pr_warn("Warning: can't allocate distance table!\n");
/* don't retry until explicitly reset */
numa_distance = (void *)1LU;
return -ENOMEM;
@@ -410,14 +410,14 @@ void __init numa_set_distance(int from, int to, int distance)
if (from >= numa_distance_cnt || to >= numa_distance_cnt ||
from < 0 || to < 0) {
- pr_warn_once("NUMA: Warning: node ids are out of bound, from=%d to=%d distance=%d\n",
- from, to, distance);
+ pr_warn_once("Warning: node ids are out of bound, from=%d to=%d distance=%d\n",
+ from, to, distance);
return;
}
if ((u8)distance != distance ||
(from == to && distance != LOCAL_DISTANCE)) {
- pr_warn_once("NUMA: Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
+ pr_warn_once("Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
from, to, distance);
return;
}
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 263c8453815e..d765acedc05c 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -1,4 +1,5 @@
-/* bpf_jit_comp.c : BPF JIT compiler
+/*
+ * bpf_jit_comp.c: BPF JIT compiler
*
* Copyright (C) 2011-2013 Eric Dumazet (eric.dumazet@gmail.com)
* Internal BPF Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com
@@ -17,7 +18,7 @@
#include <asm/nospec-branch.h>
/*
- * assembly code in arch/x86/net/bpf_jit.S
+ * Assembly code in arch/x86/net/bpf_jit.S
*/
extern u8 sk_load_word[], sk_load_half[], sk_load_byte[];
extern u8 sk_load_word_positive_offset[], sk_load_half_positive_offset[];
@@ -45,14 +46,15 @@ static u8 *emit_code(u8 *ptr, u32 bytes, unsigned int len)
#define EMIT2(b1, b2) EMIT((b1) + ((b2) << 8), 2)
#define EMIT3(b1, b2, b3) EMIT((b1) + ((b2) << 8) + ((b3) << 16), 3)
#define EMIT4(b1, b2, b3, b4) EMIT((b1) + ((b2) << 8) + ((b3) << 16) + ((b4) << 24), 4)
+
#define EMIT1_off32(b1, off) \
- do {EMIT1(b1); EMIT(off, 4); } while (0)
+ do { EMIT1(b1); EMIT(off, 4); } while (0)
#define EMIT2_off32(b1, b2, off) \
- do {EMIT2(b1, b2); EMIT(off, 4); } while (0)
+ do { EMIT2(b1, b2); EMIT(off, 4); } while (0)
#define EMIT3_off32(b1, b2, b3, off) \
- do {EMIT3(b1, b2, b3); EMIT(off, 4); } while (0)
+ do { EMIT3(b1, b2, b3); EMIT(off, 4); } while (0)
#define EMIT4_off32(b1, b2, b3, b4, off) \
- do {EMIT4(b1, b2, b3, b4); EMIT(off, 4); } while (0)
+ do { EMIT4(b1, b2, b3, b4); EMIT(off, 4); } while (0)
static bool is_imm8(int value)
{
@@ -70,9 +72,10 @@ static bool is_uimm32(u64 value)
}
/* mov dst, src */
-#define EMIT_mov(DST, SRC) \
- do {if (DST != SRC) \
- EMIT3(add_2mod(0x48, DST, SRC), 0x89, add_2reg(0xC0, DST, SRC)); \
+#define EMIT_mov(DST, SRC) \
+ do { \
+ if (DST != SRC) \
+ EMIT3(add_2mod(0x48, DST, SRC), 0x89, add_2reg(0xC0, DST, SRC)); \
} while (0)
static int bpf_size_to_x86_bytes(int bpf_size)
@@ -89,7 +92,8 @@ static int bpf_size_to_x86_bytes(int bpf_size)
return 0;
}
-/* list of x86 cond jumps opcodes (. + s8)
+/*
+ * List of x86 cond jumps opcodes (. + s8)
* Add 0x10 (and an extra 0x0f) to generate far jumps (. + s32)
*/
#define X86_JB 0x72
@@ -106,35 +110,37 @@ static int bpf_size_to_x86_bytes(int bpf_size)
#define CHOOSE_LOAD_FUNC(K, func) \
((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset)
-/* pick a register outside of BPF range for JIT internal work */
+/* Pick a register outside of BPF range for JIT internal work */
#define AUX_REG (MAX_BPF_JIT_REG + 1)
-/* The following table maps BPF registers to x64 registers.
+/*
+ * The following table maps BPF registers to x86-64 registers.
*
- * x64 register r12 is unused, since if used as base address
+ * x86-64 register R12 is unused, since if used as base address
* register in load/store instructions, it always needs an
* extra byte of encoding and is callee saved.
*
- * r9 caches skb->len - skb->data_len
- * r10 caches skb->data, and used for blinding (if enabled)
+ * R9 caches skb->len - skb->data_len
+ * R10 caches skb->data, and used for blinding (if enabled)
*/
static const int reg2hex[] = {
- [BPF_REG_0] = 0, /* rax */
- [BPF_REG_1] = 7, /* rdi */
- [BPF_REG_2] = 6, /* rsi */
- [BPF_REG_3] = 2, /* rdx */
- [BPF_REG_4] = 1, /* rcx */
- [BPF_REG_5] = 0, /* r8 */
- [BPF_REG_6] = 3, /* rbx callee saved */
- [BPF_REG_7] = 5, /* r13 callee saved */
- [BPF_REG_8] = 6, /* r14 callee saved */
- [BPF_REG_9] = 7, /* r15 callee saved */
- [BPF_REG_FP] = 5, /* rbp readonly */
- [BPF_REG_AX] = 2, /* r10 temp register */
- [AUX_REG] = 3, /* r11 temp register */
+ [BPF_REG_0] = 0, /* RAX */
+ [BPF_REG_1] = 7, /* RDI */
+ [BPF_REG_2] = 6, /* RSI */
+ [BPF_REG_3] = 2, /* RDX */
+ [BPF_REG_4] = 1, /* RCX */
+ [BPF_REG_5] = 0, /* R8 */
+ [BPF_REG_6] = 3, /* RBX callee saved */
+ [BPF_REG_7] = 5, /* R13 callee saved */
+ [BPF_REG_8] = 6, /* R14 callee saved */
+ [BPF_REG_9] = 7, /* R15 callee saved */
+ [BPF_REG_FP] = 5, /* RBP readonly */
+ [BPF_REG_AX] = 2, /* R10 temp register */
+ [AUX_REG] = 3, /* R11 temp register */
};
-/* is_ereg() == true if BPF register 'reg' maps to x64 r8..r15
+/*
+ * is_ereg() == true if BPF register 'reg' maps to x86-64 r8..r15
* which need extra byte of encoding.
* rax,rcx,...,rbp have simpler encoding
*/
@@ -153,7 +159,7 @@ static bool is_axreg(u32 reg)
return reg == BPF_REG_0;
}
-/* add modifiers if 'reg' maps to x64 registers r8..r15 */
+/* Add modifiers if 'reg' maps to x86-64 registers R8..R15 */
static u8 add_1mod(u8 byte, u32 reg)
{
if (is_ereg(reg))
@@ -170,13 +176,13 @@ static u8 add_2mod(u8 byte, u32 r1, u32 r2)
return byte;
}
-/* encode 'dst_reg' register into x64 opcode 'byte' */
+/* Encode 'dst_reg' register into x86-64 opcode 'byte' */
static u8 add_1reg(u8 byte, u32 dst_reg)
{
return byte + reg2hex[dst_reg];
}
-/* encode 'dst_reg' and 'src_reg' registers into x64 opcode 'byte' */
+/* Encode 'dst_reg' and 'src_reg' registers into x86-64 opcode 'byte' */
static u8 add_2reg(u8 byte, u32 dst_reg, u32 src_reg)
{
return byte + reg2hex[dst_reg] + (reg2hex[src_reg] << 3);
@@ -184,27 +190,28 @@ static u8 add_2reg(u8 byte, u32 dst_reg, u32 src_reg)
static void jit_fill_hole(void *area, unsigned int size)
{
- /* fill whole space with int3 instructions */
+ /* Fill whole space with INT3 instructions */
memset(area, 0xcc, size);
}
struct jit_context {
- int cleanup_addr; /* epilogue code offset */
+ int cleanup_addr; /* Epilogue code offset */
bool seen_ld_abs;
bool seen_ax_reg;
};
-/* maximum number of bytes emitted while JITing one eBPF insn */
+/* Maximum number of bytes emitted while JITing one eBPF insn */
#define BPF_MAX_INSN_SIZE 128
#define BPF_INSN_SAFETY 64
#define AUX_STACK_SPACE \
- (32 /* space for rbx, r13, r14, r15 */ + \
- 8 /* space for skb_copy_bits() buffer */)
+ (32 /* Space for RBX, R13, R14, R15 */ + \
+ 8 /* Space for skb_copy_bits() buffer */)
#define PROLOGUE_SIZE 37
-/* emit x64 prologue code for BPF program and check it's size.
+/*
+ * Emit x86-64 prologue code for BPF program and check its size.
* bpf_tail_call helper will skip it while jumping into another program
*/
static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf)
@@ -212,8 +219,11 @@ static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf)
u8 *prog = *pprog;
int cnt = 0;
- EMIT1(0x55); /* push rbp */
- EMIT3(0x48, 0x89, 0xE5); /* mov rbp,rsp */
+ /* push rbp */
+ EMIT1(0x55);
+
+ /* mov rbp,rsp */
+ EMIT3(0x48, 0x89, 0xE5);
/* sub rsp, rounded_stack_depth + AUX_STACK_SPACE */
EMIT3_off32(0x48, 0x81, 0xEC,
@@ -222,14 +232,15 @@ static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf)
/* sub rbp, AUX_STACK_SPACE */
EMIT4(0x48, 0x83, 0xED, AUX_STACK_SPACE);
- /* all classic BPF filters use R6(rbx) save it */
+ /* All classic BPF filters use R6(rbx) save it */
/* mov qword ptr [rbp+0],rbx */
EMIT4(0x48, 0x89, 0x5D, 0);
- /* bpf_convert_filter() maps classic BPF register X to R7 and uses R8
- * as temporary, so all tcpdump filters need to spill/fill R7(r13) and
- * R8(r14). R9(r15) spill could be made conditional, but there is only
+ /*
+ * bpf_convert_filter() maps classic BPF register X to R7 and uses R8
+ * as temporary, so all tcpdump filters need to spill/fill R7(R13) and
+ * R8(R14). R9(R15) spill could be made conditional, but there is only
* one 'bpf_error' return path out of helper functions inside bpf_jit.S
* The overhead of extra spill is negligible for any filter other
* than synthetic ones. Therefore not worth adding complexity.
@@ -243,9 +254,10 @@ static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf)
EMIT4(0x4C, 0x89, 0x7D, 24);
if (!ebpf_from_cbpf) {
- /* Clear the tail call counter (tail_call_cnt): for eBPF tail
+ /*
+ * Clear the tail call counter (tail_call_cnt): for eBPF tail
* calls we need to reset the counter to 0. It's done in two
- * instructions, resetting rax register to 0, and moving it
+ * instructions, resetting RAX register to 0, and moving it
* to the counter location.
*/
@@ -260,7 +272,9 @@ static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf)
*pprog = prog;
}
-/* generate the following code:
+/*
+ * Generate the following code:
+ *
* ... bpf_tail_call(void *ctx, struct bpf_array *array, u64 index) ...
* if (index >= array->map.max_entries)
* goto out;
@@ -278,23 +292,26 @@ static void emit_bpf_tail_call(u8 **pprog)
int label1, label2, label3;
int cnt = 0;
- /* rdi - pointer to ctx
+ /*
+ * rdi - pointer to ctx
* rsi - pointer to bpf_array
* rdx - index in bpf_array
*/
- /* if (index >= array->map.max_entries)
- * goto out;
+ /*
+ * if (index >= array->map.max_entries)
+ * goto out;
*/
EMIT2(0x89, 0xD2); /* mov edx, edx */
EMIT3(0x39, 0x56, /* cmp dword ptr [rsi + 16], edx */
offsetof(struct bpf_array, map.max_entries));
-#define OFFSET1 (41 + RETPOLINE_RAX_BPF_JIT_SIZE) /* number of bytes to jump */
+#define OFFSET1 (41 + RETPOLINE_RAX_BPF_JIT_SIZE) /* Number of bytes to jump */
EMIT2(X86_JBE, OFFSET1); /* jbe out */
label1 = cnt;
- /* if (tail_call_cnt > MAX_TAIL_CALL_CNT)
- * goto out;
+ /*
+ * if (tail_call_cnt > MAX_TAIL_CALL_CNT)
+ * goto out;
*/
EMIT2_off32(0x8B, 0x85, 36); /* mov eax, dword ptr [rbp + 36] */
EMIT3(0x83, 0xF8, MAX_TAIL_CALL_CNT); /* cmp eax, MAX_TAIL_CALL_CNT */
@@ -308,8 +325,9 @@ static void emit_bpf_tail_call(u8 **pprog)
EMIT4_off32(0x48, 0x8B, 0x84, 0xD6, /* mov rax, [rsi + rdx * 8 + offsetof(...)] */
offsetof(struct bpf_array, ptrs));
- /* if (prog == NULL)
- * goto out;
+ /*
+ * if (prog == NULL)
+ * goto out;
*/
EMIT3(0x48, 0x85, 0xC0); /* test rax,rax */
#define OFFSET3 (8 + RETPOLINE_RAX_BPF_JIT_SIZE)
@@ -321,7 +339,8 @@ static void emit_bpf_tail_call(u8 **pprog)
offsetof(struct bpf_prog, bpf_func));
EMIT4(0x48, 0x83, 0xC0, PROLOGUE_SIZE); /* add rax, prologue_size */
- /* now we're ready to jump into next BPF program
+ /*
+ * Wow we're ready to jump into next BPF program
* rdi == ctx (1st arg)
* rax == prog->bpf_func + prologue_size
*/
@@ -340,7 +359,8 @@ static void emit_load_skb_data_hlen(u8 **pprog)
u8 *prog = *pprog;
int cnt = 0;
- /* r9d = skb->len - skb->data_len (headlen)
+ /*
+ * r9d = skb->len - skb->data_len (headlen)
* r10 = skb->data
*/
/* mov %r9d, off32(%rdi) */
@@ -361,7 +381,8 @@ static void emit_mov_imm32(u8 **pprog, bool sign_propagate,
u8 b1, b2, b3;
int cnt = 0;
- /* optimization: if imm32 is positive, use 'mov %eax, imm32'
+ /*
+ * Optimization: if imm32 is positive, use 'mov %eax, imm32'
* (which zero-extends imm32) to save 2 bytes.
*/
if (sign_propagate && (s32)imm32 < 0) {
@@ -373,7 +394,8 @@ static void emit_mov_imm32(u8 **pprog, bool sign_propagate,
goto done;
}
- /* optimization: if imm32 is zero, use 'xor %eax, %eax'
+ /*
+ * Optimization: if imm32 is zero, use 'xor %eax, %eax'
* to save 3 bytes.
*/
if (imm32 == 0) {
@@ -400,7 +422,8 @@ static void emit_mov_imm64(u8 **pprog, u32 dst_reg,
int cnt = 0;
if (is_uimm32(((u64)imm32_hi << 32) | (u32)imm32_lo)) {
- /* For emitting plain u32, where sign bit must not be
+ /*
+ * For emitting plain u32, where sign bit must not be
* propagated LLVM tends to load imm64 over mov32
* directly, so save couple of bytes by just doing
* 'mov %eax, imm32' instead.
@@ -525,7 +548,8 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
else if (is_ereg(dst_reg))
EMIT1(add_1mod(0x40, dst_reg));
- /* b3 holds 'normal' opcode, b2 short form only valid
+ /*
+ * b3 holds 'normal' opcode, b2 short form only valid
* in case dst is eax/rax.
*/
switch (BPF_OP(insn->code)) {
@@ -593,7 +617,8 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
/* mov rax, dst_reg */
EMIT_mov(BPF_REG_0, dst_reg);
- /* xor edx, edx
+ /*
+ * xor edx, edx
* equivalent to 'xor rdx, rdx', but one byte less
*/
EMIT2(0x31, 0xd2);
@@ -655,7 +680,7 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
}
break;
}
- /* shifts */
+ /* Shifts */
case BPF_ALU | BPF_LSH | BPF_K:
case BPF_ALU | BPF_RSH | BPF_K:
case BPF_ALU | BPF_ARSH | BPF_K:
@@ -686,7 +711,7 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
case BPF_ALU64 | BPF_RSH | BPF_X:
case BPF_ALU64 | BPF_ARSH | BPF_X:
- /* check for bad case when dst_reg == rcx */
+ /* Check for bad case when dst_reg == rcx */
if (dst_reg == BPF_REG_4) {
/* mov r11, dst_reg */
EMIT_mov(AUX_REG, dst_reg);
@@ -724,13 +749,13 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
case BPF_ALU | BPF_END | BPF_FROM_BE:
switch (imm32) {
case 16:
- /* emit 'ror %ax, 8' to swap lower 2 bytes */
+ /* Emit 'ror %ax, 8' to swap lower 2 bytes */
EMIT1(0x66);
if (is_ereg(dst_reg))
EMIT1(0x41);
EMIT3(0xC1, add_1reg(0xC8, dst_reg), 8);
- /* emit 'movzwl eax, ax' */
+ /* Emit 'movzwl eax, ax' */
if (is_ereg(dst_reg))
EMIT3(0x45, 0x0F, 0xB7);
else
@@ -738,7 +763,7 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
EMIT1(add_2reg(0xC0, dst_reg, dst_reg));
break;
case 32:
- /* emit 'bswap eax' to swap lower 4 bytes */
+ /* Emit 'bswap eax' to swap lower 4 bytes */
if (is_ereg(dst_reg))
EMIT2(0x41, 0x0F);
else
@@ -746,7 +771,7 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
EMIT1(add_1reg(0xC8, dst_reg));
break;
case 64:
- /* emit 'bswap rax' to swap 8 bytes */
+ /* Emit 'bswap rax' to swap 8 bytes */
EMIT3(add_1mod(0x48, dst_reg), 0x0F,
add_1reg(0xC8, dst_reg));
break;
@@ -756,7 +781,8 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
case BPF_ALU | BPF_END | BPF_FROM_LE:
switch (imm32) {
case 16:
- /* emit 'movzwl eax, ax' to zero extend 16-bit
+ /*
+ * Emit 'movzwl eax, ax' to zero extend 16-bit
* into 64 bit
*/
if (is_ereg(dst_reg))
@@ -766,7 +792,7 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
EMIT1(add_2reg(0xC0, dst_reg, dst_reg));
break;
case 32:
- /* emit 'mov eax, eax' to clear upper 32-bits */
+ /* Emit 'mov eax, eax' to clear upper 32-bits */
if (is_ereg(dst_reg))
EMIT1(0x45);
EMIT2(0x89, add_2reg(0xC0, dst_reg, dst_reg));
@@ -809,9 +835,9 @@ st: if (is_imm8(insn->off))
/* STX: *(u8*)(dst_reg + off) = src_reg */
case BPF_STX | BPF_MEM | BPF_B:
- /* emit 'mov byte ptr [rax + off], al' */
+ /* Emit 'mov byte ptr [rax + off], al' */
if (is_ereg(dst_reg) || is_ereg(src_reg) ||
- /* have to add extra byte for x86 SIL, DIL regs */
+ /* We have to add extra byte for x86 SIL, DIL regs */
src_reg == BPF_REG_1 || src_reg == BPF_REG_2)
EMIT2(add_2mod(0x40, dst_reg, src_reg), 0x88);
else
@@ -840,25 +866,26 @@ stx: if (is_imm8(insn->off))
/* LDX: dst_reg = *(u8*)(src_reg + off) */
case BPF_LDX | BPF_MEM | BPF_B:
- /* emit 'movzx rax, byte ptr [rax + off]' */
+ /* Emit 'movzx rax, byte ptr [rax + off]' */
EMIT3(add_2mod(0x48, src_reg, dst_reg), 0x0F, 0xB6);
goto ldx;
case BPF_LDX | BPF_MEM | BPF_H:
- /* emit 'movzx rax, word ptr [rax + off]' */
+ /* Emit 'movzx rax, word ptr [rax + off]' */
EMIT3(add_2mod(0x48, src_reg, dst_reg), 0x0F, 0xB7);
goto ldx;
case BPF_LDX | BPF_MEM | BPF_W:
- /* emit 'mov eax, dword ptr [rax+0x14]' */
+ /* Emit 'mov eax, dword ptr [rax+0x14]' */
if (is_ereg(dst_reg) || is_ereg(src_reg))
EMIT2(add_2mod(0x40, src_reg, dst_reg), 0x8B);
else
EMIT1(0x8B);
goto ldx;
case BPF_LDX | BPF_MEM | BPF_DW:
- /* emit 'mov rax, qword ptr [rax+0x14]' */
+ /* Emit 'mov rax, qword ptr [rax+0x14]' */
EMIT2(add_2mod(0x48, src_reg, dst_reg), 0x8B);
-ldx: /* if insn->off == 0 we can save one extra byte, but
- * special case of x86 r13 which always needs an offset
+ldx: /*
+ * If insn->off == 0 we can save one extra byte, but
+ * special case of x86 R13 which always needs an offset
* is not worth the hassle
*/
if (is_imm8(insn->off))
@@ -870,7 +897,7 @@ ldx: /* if insn->off == 0 we can save one extra byte, but
/* STX XADD: lock *(u32*)(dst_reg + off) += src_reg */
case BPF_STX | BPF_XADD | BPF_W:
- /* emit 'lock add dword ptr [rax + off], eax' */
+ /* Emit 'lock add dword ptr [rax + off], eax' */
if (is_ereg(dst_reg) || is_ereg(src_reg))
EMIT3(0xF0, add_2mod(0x40, dst_reg, src_reg), 0x01);
else
@@ -897,14 +924,15 @@ xadd: if (is_imm8(insn->off))
} else {
EMIT2(0x41, 0x52); /* push %r10 */
EMIT2(0x41, 0x51); /* push %r9 */
- /* need to adjust jmp offset, since
+ /*
+ * We need to adjust jmp offset, since
* pop %r9, pop %r10 take 4 bytes after call insn
*/
jmp_offset += 4;
}
}
if (!imm32 || !is_simm32(jmp_offset)) {
- pr_err("unsupported bpf func %d addr %p image %p\n",
+ pr_err("unsupported BPF func %d addr %p image %p\n",
imm32, func, image);
return -EINVAL;
}
@@ -970,7 +998,7 @@ xadd: if (is_imm8(insn->off))
else
EMIT2_off32(0x81, add_1reg(0xF8, dst_reg), imm32);
-emit_cond_jmp: /* convert BPF opcode to x86 */
+emit_cond_jmp: /* Convert BPF opcode to x86 */
switch (BPF_OP(insn->code)) {
case BPF_JEQ:
jmp_cond = X86_JE;
@@ -996,22 +1024,22 @@ emit_cond_jmp: /* convert BPF opcode to x86 */
jmp_cond = X86_JBE;
break;
case BPF_JSGT:
- /* signed '>', GT in x86 */
+ /* Signed '>', GT in x86 */
jmp_cond = X86_JG;
break;
case BPF_JSLT:
- /* signed '<', LT in x86 */
+ /* Signed '<', LT in x86 */
jmp_cond = X86_JL;
break;
case BPF_JSGE:
- /* signed '>=', GE in x86 */
+ /* Signed '>=', GE in x86 */
jmp_cond = X86_JGE;
break;
case BPF_JSLE:
- /* signed '<=', LE in x86 */
+ /* Signed '<=', LE in x86 */
jmp_cond = X86_JLE;
break;
- default: /* to silence gcc warning */
+ default: /* to silence GCC warning */
return -EFAULT;
}
jmp_offset = addrs[i + insn->off] - addrs[i];
@@ -1039,7 +1067,7 @@ emit_cond_jmp: /* convert BPF opcode to x86 */
jmp_offset = addrs[i + insn->off] - addrs[i];
if (!jmp_offset)
- /* optimize out nop jumps */
+ /* Optimize out nop jumps */
break;
emit_jmp:
if (is_imm8(jmp_offset)) {
@@ -1061,7 +1089,7 @@ common_load:
ctx->seen_ld_abs = seen_ld_abs = true;
jmp_offset = func - (image + addrs[i]);
if (!func || !is_simm32(jmp_offset)) {
- pr_err("unsupported bpf func %d addr %p image %p\n",
+ pr_err("unsupported BPF func %d addr %p image %p\n",
imm32, func, image);
return -EINVAL;
}
@@ -1080,7 +1108,8 @@ common_load:
EMIT2_off32(0x81, 0xC6, imm32);
}
}
- /* skb pointer is in R6 (%rbx), it will be copied into
+ /*
+ * skb pointer is in R6 (%rbx), it will be copied into
* %rdi if skb_copy_bits() call is necessary.
* sk_load_* helpers also use %r10 and %r9d.
* See bpf_jit.S
@@ -1111,7 +1140,7 @@ common_load:
goto emit_jmp;
}
seen_exit = true;
- /* update cleanup_addr */
+ /* Update cleanup_addr */
ctx->cleanup_addr = proglen;
/* mov rbx, qword ptr [rbp+0] */
EMIT4(0x48, 0x8B, 0x5D, 0);
@@ -1129,10 +1158,11 @@ common_load:
break;
default:
- /* By design x64 JIT should support all BPF instructions
+ /*
+ * By design x86-64 JIT should support all BPF instructions.
* This error will be seen if new instruction was added
- * to interpreter, but not to JIT
- * or if there is junk in bpf_prog
+ * to the interpreter, but not to the JIT, or if there is
+ * junk in bpf_prog.
*/
pr_err("bpf_jit: unknown opcode %02x\n", insn->code);
return -EINVAL;
@@ -1184,7 +1214,8 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
return orig_prog;
tmp = bpf_jit_blind_constants(prog);
- /* If blinding was requested and we failed during blinding,
+ /*
+ * If blinding was requested and we failed during blinding,
* we must fall back to the interpreter.
*/
if (IS_ERR(tmp))
@@ -1218,8 +1249,9 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
goto out_addrs;
}
- /* Before first pass, make a rough estimation of addrs[]
- * each bpf instruction is translated to less than 64 bytes
+ /*
+ * Before first pass, make a rough estimation of addrs[]
+ * each BPF instruction is translated to less than 64 bytes
*/
for (proglen = 0, i = 0; i < prog->len; i++) {
proglen += 64;
@@ -1228,10 +1260,11 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
ctx.cleanup_addr = proglen;
skip_init_addrs:
- /* JITed image shrinks with every pass and the loop iterates
- * until the image stops shrinking. Very large bpf programs
+ /*
+ * JITed image shrinks with every pass and the loop iterates
+ * until the image stops shrinking. Very large BPF programs
* may converge on the last pass. In such case do one more
- * pass to emit the final image
+ * pass to emit the final image.
*/
for (pass = 0; pass < 20 || image; pass++) {
proglen = do_jit(prog, addrs, image, oldproglen, &ctx);