diff options
author | Maxime Ripard <maxime.ripard@bootlin.com> | 2018-11-20 21:03:20 +0100 |
---|---|---|
committer | Maxime Ripard <maxime.ripard@bootlin.com> | 2018-11-28 15:14:08 +0100 |
commit | d491714e8187bd5c3254971074d6c96875f0b957 (patch) | |
tree | abac01272accfc41cca695230675a258a3dd7750 /arch | |
parent | 8f9e10524902d0b476bcda18cec1925fba6ce2df (diff) | |
download | linux-d491714e8187bd5c3254971074d6c96875f0b957.tar.bz2 |
ARM: dts: sun6i: Remove card detect pull-up
Boards usually have an external pull-up on the card-detect signal, so
there's no need to add another one.
This also removes a DTC warning.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/boot/dts/sun6i-a31-colombus.dts | 8 | ||||
-rw-r--r-- | arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 11 | ||||
-rw-r--r-- | arch/arm/boot/dts/sun6i-a31-i7.dts | 10 | ||||
-rw-r--r-- | arch/arm/boot/dts/sun6i-a31-m9.dts | 10 | ||||
-rw-r--r-- | arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts | 10 | ||||
-rw-r--r-- | arch/arm/boot/dts/sun6i-a31s-primo81.dts | 8 | ||||
-rw-r--r-- | arch/arm/boot/dts/sun6i-a31s-sina31s.dts | 10 | ||||
-rw-r--r-- | arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 10 | ||||
-rw-r--r-- | arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts | 10 | ||||
-rw-r--r-- | arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi | 8 |
10 files changed, 10 insertions, 85 deletions
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 557d4a988d9a..21584c2f968f 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -114,7 +114,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ @@ -126,12 +126,6 @@ }; &pio { - mmc0_cd_pin_colombus: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; - i2c_lcd_pins: i2c_lcd_pin@0 { pins = "PA23", "PA24"; function = "gpio_out"; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index fc49d14059b1..5a3b0face30e 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -215,7 +215,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ @@ -241,15 +241,6 @@ status = "okay"; }; -&pio { - mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; - -}; - &p2wi { status = "okay"; diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts index 679f0fa7e50c..f3e95d08fefc 100644 --- a/arch/arm/boot/dts/sun6i-a31-i7.dts +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -144,21 +144,13 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ status = "okay"; }; -&pio { - mmc0_cd_pin_i7: mmc0_cd_pin@0 { - pins = "PH22"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_usb1_vbus { gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 87ae3031aa89..90fb1f603820 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -102,7 +102,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ @@ -122,14 +122,6 @@ #include "axp22x.dtsi" -&pio { - mmc0_cd_pin_m9: mmc0_cd_pin@0 { - pins = "PH22"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_aldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts index 0711f55945e0..3dcf44580839 100644 --- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -102,7 +102,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ @@ -122,14 +122,6 @@ #include "axp22x.dtsi" -&pio { - mmc0_cd_pin_m9: mmc0_cd_pin@0 { - pins = "PH22"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_aldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index dd6ede6a8377..55d60c68694e 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -146,7 +146,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ @@ -159,12 +159,6 @@ function = "gpio_in"; bias-pull-up; }; - - mmc0_cd_pin_primo81: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; }; &p2wi { diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts index 1b07a950cb45..02c9a90fe876 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts @@ -162,7 +162,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ @@ -173,14 +173,6 @@ status = "okay"; }; -&pio { - mmc0_cd_pin_sina31s: mmc0_cd_pin@0 { - pins = "PA4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index ea29af15125b..016b23831cec 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -113,7 +113,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ @@ -163,14 +163,6 @@ }; }; -&pio { - mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 { - pins = "PA4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - #include "axp22x.dtsi" ®_aldo1 { diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index aab6c1720ef7..2d8dc4321b7b 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -89,17 +89,9 @@ status = "okay"; }; -&pio { - mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi index 4e72e4f3ef96..77f952b12188 100644 --- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi @@ -66,7 +66,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ @@ -74,12 +74,6 @@ }; &pio { - mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { pins = "PA15"; function = "gpio_in"; |