diff options
author | Andreas Färber <afaerber@suse.de> | 2016-10-16 16:44:23 +0200 |
---|---|---|
committer | Shawn Guo <shawnguo@kernel.org> | 2016-10-24 19:33:27 +0800 |
commit | 76e691fc7653b85d390e58710e5c7db73ca49367 (patch) | |
tree | 485ccaf379ca393b32331b6918c1940fab60399b /arch | |
parent | 4d9e9cbb61fdf8d037e5ad95ed03c414073b1443 (diff) | |
download | linux-76e691fc7653b85d390e58710e5c7db73ca49367.tar.bz2 |
ARM: dts: imx6sx: Add UDOO Neo support
Add initial device trees for UDOO Neo Basic, Extended and Full boards:
* Serial console is enabled, other serial ports are prepared.
* I2C based PMIC is enabled.
* Ethernet is enabled for Basic and Full.
* SDHC is enabled, with the SDIO_PWR GPIO modeled as a regulator.
* Both user LEDs are enabled, with the orange one reserved for the M4
and with the SD card as default trigger for the red LED.
The decision on a board compatible string is deferred to later.
Cc: Ettore Chimenti <ettore.chimenti@udoo.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/boot/dts/Makefile | 5 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts | 69 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts | 54 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6sx-udoo-neo-full.dts | 69 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 293 |
5 files changed, 489 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 019976b50fbf..da0197dfc284 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -417,7 +417,10 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sabreauto.dtb \ imx6sx-sdb-reva.dtb \ imx6sx-sdb-sai.dtb \ - imx6sx-sdb.dtb + imx6sx-sdb.dtb \ + imx6sx-udoo-neo-basic.dtb \ + imx6sx-udoo-neo-extended.dtb \ + imx6sx-udoo-neo-full.dtb dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-14x14-evk.dtb \ imx6ul-geam-kit.dtb \ diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts new file mode 100644 index 000000000000..0b888789efc6 --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts @@ -0,0 +1,69 @@ +/* + * Copyright (c) 2016 Andreas Färber + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6sx-udoo-neo.dtsi" + +/ { + model = "UDOO Neo Basic"; + compatible = "fsl,imx6sx"; + + memory { + reg = <0x80000000 0x20000000>; + }; +}; + +&fec1 { + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts new file mode 100644 index 000000000000..d6fdd17cd3ac --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts @@ -0,0 +1,54 @@ +/* + * Copyright (c) 2016 Andreas Färber + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6sx-udoo-neo.dtsi" + +/ { + model = "UDOO Neo Extended"; + compatible = "fsl,imx6sx"; + + memory { + reg = <0x80000000 0x40000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts new file mode 100644 index 000000000000..d8c3577c9dd5 --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts @@ -0,0 +1,69 @@ +/* + * Copyright (c) 2016 Andreas Färber + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6sx-udoo-neo.dtsi" + +/ { + model = "UDOO Neo Full"; + compatible = "fsl,imx6sx"; + + memory { + reg = <0x80000000 0x40000000>; + }; +}; + +&fec1 { + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi new file mode 100644 index 000000000000..2b65d26f4396 --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi @@ -0,0 +1,293 @@ +/* + * Copyright (c) 2016 Andreas Färber + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6sx.dtsi" + +/ { + compatible = "fsl,imx6sx"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + red { + label = "udoo-neo:red:mmc"; + gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + + orange { + label = "udoo-neo:orange:user"; + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; + + reg_sdio_pwr: regulator-sdio-pwr { + compatible = "regulator-fixed"; + gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "SDIO_PWR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; + soc-supply = <&sw1c_reg>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; + + pmic: pmic@08 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = + <MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0xa0b1>, + <MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1>, + <MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1>, + <MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1>, + <MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1>, + <MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1>, + + <MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x3081>, + <MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x3081>, + <MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081>, + <MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081>, + <MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081>, + <MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER 0x3081>, + + <MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91>; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1>, + <MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1>; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>, + <MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1>; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1>, + <MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1>; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = + <MX6SX_PAD_SD4_DATA4__UART5_RX 0x1b0b1>, + <MX6SX_PAD_SD4_DATA5__UART5_TX 0x1b0b1>; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = + <MX6SX_PAD_CSI_DATA00__UART6_RI_B 0x1b0b1>, + <MX6SX_PAD_CSI_DATA01__UART6_DSR_B 0x1b0b1>, + <MX6SX_PAD_CSI_DATA02__UART6_DTR_B 0x1b0b1>, + <MX6SX_PAD_CSI_DATA03__UART6_DCD_B 0x1b0b1>, + <MX6SX_PAD_CSI_DATA04__UART6_RX 0x1b0b1>, + <MX6SX_PAD_CSI_DATA05__UART6_TX 0x1b0b1>, + <MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x1b0b1>, + <MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x1b0b1>; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = + <MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059>, + <MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059>, + <MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059>, + <MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059>, + <MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059>, + <MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059>, + <MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x17059>; /* CD */ + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* Cortex-M4 serial */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "disabled"; +}; + +/* Arduino serial */ +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "disabled"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + uart-has-rtscts; + status = "disabled"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vmmc-supply = <®_sdio_pwr>; + bus-width = <4>; + cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; |