ARM: OMAP2+: clk: remove obsolete clksel support code

The clksel clock type is no longer used for anything, it is rather
replaced with common clock divider code. Thus, remove the dead code
from kernel.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

3 files changed, 1 insertions, 480 deletions

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index a2f51564e8d4..d03bc21d7db3 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -12,8 +12,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
 
 hwmod-common				= omap_hwmod.o omap_hwmod_reset.o \
 					  omap_hwmod_common_data.o
-clock-common				= clock.o clock_common_data.o \
-					  clkt_clksel.o
+clock-common				= clock.o clock_common_data.o
 secure-common				= omap-smc.o omap-secure.o
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
deleted file mode 100644
index 7ee26108ac0d..000000000000
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ /dev/null
@@ -1,466 +0,0 @@
-/*
- * clkt_clksel.c - OMAP2/3/4 clksel clock functions
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- * clksel clocks are clocks that do not have a fixed parent, or that
- * can divide their parent's rate, or possibly both at the same time, based
- * on the contents of a hardware register bitfield.
- *
- * All of the various mux and divider settings can be encoded into
- * struct clksel* data structures, and then these can be autogenerated
- * from some hardware database for each new chip generation.  This
- * should avoid the need to write, review, and validate a lot of new
- * clock code for each new chip, since it can be exported from the SoC
- * design flow.  This is now done on OMAP4.
- *
- * The fusion of mux and divider clocks is a software creation.  In
- * hardware reality, the multiplexer (parent selection) and the
- * divider exist separately.  XXX At some point these clksel clocks
- * should be split into "divider" clocks and "mux" clocks to better
- * match the hardware.
- *
- * (The name "clksel" comes from the name of the corresponding
- * register field in the OMAP2/3 family of SoCs.)
- *
- * XXX Currently these clocks are only used in the OMAP2/3/4 code, but
- * many of the OMAP1 clocks should be convertible to use this
- * mechanism.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-#include <linux/bug.h>
-
-#include "clock.h"
-
-/* Private functions */
-
-/**
- * _get_clksel_by_parent() - return clksel struct for a given clk & parent
- * @clk: OMAP struct clk ptr to inspect
- * @src_clk: OMAP struct clk ptr of the parent clk to search for
- *
- * Scan the struct clksel array associated with the clock to find
- * the element associated with the supplied parent clock address.
- * Returns a pointer to the struct clksel on success or NULL on error.
- */
-static const struct clksel *_get_clksel_by_parent(struct clk_hw_omap *clk,
-						  struct clk *src_clk)
-{
-	const struct clksel *clks;
-
-	if (!src_clk)
-		return NULL;
-
-	for (clks = clk->clksel; clks->parent; clks++)
-		if (clks->parent == src_clk)
-			break; /* Found the requested parent */
-
-	if (!clks->parent) {
-		/* This indicates a data problem */
-		WARN(1, "clock: %s: could not find parent clock %s in clksel array\n",
-		     __clk_get_name(clk->hw.clk), __clk_get_name(src_clk));
-		return NULL;
-	}
-
-	return clks;
-}
-
-/**
- * _write_clksel_reg() - program a clock's clksel register in hardware
- * @clk: struct clk * to program
- * @v: clksel bitfield value to program (with LSB at bit 0)
- *
- * Shift the clksel register bitfield value @v to its appropriate
- * location in the clksel register and write it in.  This function
- * will ensure that the write to the clksel_reg reaches its
- * destination before returning -- important since PRM and CM register
- * accesses can be quite slow compared to ARM cycles -- but does not
- * take into account any time the hardware might take to switch the
- * clock source.
- */
-static void _write_clksel_reg(struct clk_hw_omap *clk, u32 field_val)
-{
-	u32 v;
-
-	v = omap2_clk_readl(clk, clk->clksel_reg);
-	v &= ~clk->clksel_mask;
-	v |= field_val << __ffs(clk->clksel_mask);
-	omap2_clk_writel(v, clk, clk->clksel_reg);
-
-	v = omap2_clk_readl(clk, clk->clksel_reg); /* OCP barrier */
-}
-
-/**
- * _clksel_to_divisor() - turn clksel field value into integer divider
- * @clk: OMAP struct clk to use
- * @field_val: register field value to find
- *
- * Given a struct clk of a rate-selectable clksel clock, and a register field
- * value to search for, find the corresponding clock divisor.  The register
- * field value should be pre-masked and shifted down so the LSB is at bit 0
- * before calling.  Returns 0 on error or returns the actual integer divisor
- * upon success.
- */
-static u32 _clksel_to_divisor(struct clk_hw_omap *clk, u32 field_val)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-	struct clk *parent;
-
-	parent = __clk_get_parent(clk->hw.clk);
-
-	clks = _get_clksel_by_parent(clk, parent);
-	if (!clks)
-		return 0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (!(clkr->flags & cpu_mask))
-			continue;
-
-		if (clkr->val == field_val)
-			break;
-	}
-
-	if (!clkr->div) {
-		/* This indicates a data error */
-		WARN(1, "clock: %s: could not find fieldval %d for parent %s\n",
-		     __clk_get_name(clk->hw.clk), field_val,
-		     __clk_get_name(parent));
-		return 0;
-	}
-
-	return clkr->div;
-}
-
-/**
- * _divisor_to_clksel() - turn clksel integer divisor into a field value
- * @clk: OMAP struct clk to use
- * @div: integer divisor to search for
- *
- * Given a struct clk of a rate-selectable clksel clock, and a clock
- * divisor, find the corresponding register field value.  Returns the
- * register field value _before_ left-shifting (i.e., LSB is at bit
- * 0); or returns 0xFFFFFFFF (~0) upon error.
- */
-static u32 _divisor_to_clksel(struct clk_hw_omap *clk, u32 div)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-	struct clk *parent;
-
-	/* should never happen */
-	WARN_ON(div == 0);
-
-	parent = __clk_get_parent(clk->hw.clk);
-	clks = _get_clksel_by_parent(clk, parent);
-	if (!clks)
-		return ~0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (!(clkr->flags & cpu_mask))
-			continue;
-
-		if (clkr->div == div)
-			break;
-	}
-
-	if (!clkr->div) {
-		pr_err("clock: %s: could not find divisor %d for parent %s\n",
-		       __clk_get_name(clk->hw.clk), div,
-		       __clk_get_name(parent));
-		return ~0;
-	}
-
-	return clkr->val;
-}
-
-/**
- * _read_divisor() - get current divisor applied to parent clock (from hdwr)
- * @clk: OMAP struct clk to use.
- *
- * Read the current divisor register value for @clk that is programmed
- * into the hardware, convert it into the actual divisor value, and
- * return it; or return 0 on error.
- */
-static u32 _read_divisor(struct clk_hw_omap *clk)
-{
-	u32 v;
-
-	if (!clk->clksel || !clk->clksel_mask)
-		return 0;
-
-	v = omap2_clk_readl(clk, clk->clksel_reg);
-	v &= clk->clksel_mask;
-	v >>= __ffs(clk->clksel_mask);
-
-	return _clksel_to_divisor(clk, v);
-}
-
-/* Public functions */
-
-/**
- * omap2_clksel_round_rate_div() - find divisor for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- * @new_div: ptr to where we should store the divisor
- *
- * Finds 'best' divider value in an array based on the source and target
- * rates.  The divider array must be sorted with smallest divider first.
- * This function is also used by the DPLL3 M2 divider code.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk,
-						 unsigned long target_rate,
-				u32 *new_div)
-{
-	unsigned long test_rate;
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-	u32 last_div = 0;
-	struct clk *parent;
-	unsigned long parent_rate;
-	const char *clk_name;
-
-	parent = __clk_get_parent(clk->hw.clk);
-	clk_name = __clk_get_name(clk->hw.clk);
-	parent_rate = __clk_get_rate(parent);
-
-	if (!clk->clksel || !clk->clksel_mask)
-		return ~0;
-
-	pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
-		 clk_name, target_rate);
-
-	*new_div = 1;
-
-	clks = _get_clksel_by_parent(clk, parent);
-	if (!clks)
-		return ~0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (!(clkr->flags & cpu_mask))
-			continue;
-
-		/* Sanity check */
-		if (clkr->div <= last_div)
-			pr_err("clock: %s: clksel_rate table not sorted\n",
-			       clk_name);
-
-		last_div = clkr->div;
-
-		test_rate = parent_rate / clkr->div;
-
-		if (test_rate <= target_rate)
-			break; /* found it */
-	}
-
-	if (!clkr->div) {
-		pr_err("clock: %s: could not find divisor for target rate %ld for parent %s\n",
-		       clk_name, target_rate, __clk_get_name(parent));
-		return ~0;
-	}
-
-	*new_div = clkr->div;
-
-	pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
-		 (parent_rate / clkr->div));
-
-	return parent_rate / clkr->div;
-}
-
-/*
- * Clocktype interface functions to the OMAP clock code
- * (i.e., those used in struct clk field function pointers, etc.)
- */
-
-/**
- * omap2_clksel_find_parent_index() - return the array index of the current
- * hardware parent of @hw
- * @hw: struct clk_hw * to find the current hardware parent of
- *
- * Given a struct clk_hw pointer @hw to the 'hw' member of a struct
- * clk_hw_omap record representing a source-selectable hardware clock,
- * read the hardware register and determine what its parent is
- * currently set to.  Intended to be called only by the common clock
- * framework struct clk_hw_ops.get_parent function pointer.  Return
- * the array index of this parent clock upon success -- there is no
- * way to return an error, so if we encounter an error, just WARN()
- * and pretend that we know that we're doing.
- */
-u8 omap2_clksel_find_parent_index(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-	u32 r, found = 0;
-	struct clk *parent;
-	const char *clk_name;
-	int ret = 0, f = 0;
-
-	parent = __clk_get_parent(hw->clk);
-	clk_name = __clk_get_name(hw->clk);
-
-	/* XXX should be able to return an error */
-	WARN((!clk->clksel || !clk->clksel_mask),
-	     "clock: %s: attempt to call on a non-clksel clock", clk_name);
-
-	r = omap2_clk_readl(clk, clk->clksel_reg) & clk->clksel_mask;
-	r >>= __ffs(clk->clksel_mask);
-
-	for (clks = clk->clksel; clks->parent && !found; clks++) {
-		for (clkr = clks->rates; clkr->div && !found; clkr++) {
-			if (!(clkr->flags & cpu_mask))
-				continue;
-
-			if (clkr->val == r) {
-				found = 1;
-				ret = f;
-			}
-		}
-		f++;
-	}
-
-	/* This indicates a data error */
-	WARN(!found, "clock: %s: init parent: could not find regval %0x\n",
-	     clk_name, r);
-
-	return ret;
-}
-
-
-/**
- * omap2_clksel_recalc() - function ptr to pass via struct clk .recalc field
- * @clk: struct clk *
- *
- * This function is intended to be called only by the clock framework.
- * Each clksel clock should have its struct clk .recalc field set to this
- * function.  Returns the clock's current rate, based on its parent's rate
- * and its current divisor setting in the hardware.
- */
-unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate)
-{
-	unsigned long rate;
-	u32 div = 0;
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
-	if (!parent_rate)
-		return 0;
-
-	div = _read_divisor(clk);
-	if (!div)
-		rate = parent_rate;
-	else
-		rate = parent_rate / div;
-
-	pr_debug("%s: recalc'd %s's rate to %lu (div %d)\n", __func__,
-		 __clk_get_name(hw->clk), rate, div);
-
-	return rate;
-}
-
-/**
- * omap2_clksel_round_rate() - find rounded rate for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- *
- * This function is intended to be called only by the clock framework.
- * Finds best target rate based on the source clock and possible dividers.
- * rates. The divider array must be sorted with smallest divider first.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate,
-			unsigned long *parent_rate)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	u32 new_div;
-
-	return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
-}
-
-/**
- * omap2_clksel_set_rate() - program clock rate in hardware
- * @clk: struct clk * to program rate
- * @rate: target rate to program
- *
- * This function is intended to be called only by the clock framework.
- * Program @clk's rate to @rate in the hardware.  The clock can be
- * either enabled or disabled when this happens, although if the clock
- * is enabled, some downstream devices may glitch or behave
- * unpredictably when the clock rate is changed - this depends on the
- * hardware. This function does not currently check the usecount of
- * the clock, so if multiple drivers are using the clock, and the rate
- * is changed, they will all be affected without any notification.
- * Returns -EINVAL upon error, or 0 upon success.
- */
-int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long parent_rate)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	u32 field_val, validrate, new_div = 0;
-
-	if (!clk->clksel || !clk->clksel_mask)
-		return -EINVAL;
-
-	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
-	if (validrate != rate)
-		return -EINVAL;
-
-	field_val = _divisor_to_clksel(clk, new_div);
-	if (field_val == ~0)
-		return -EINVAL;
-
-	_write_clksel_reg(clk, field_val);
-
-	pr_debug("clock: %s: set rate to %ld\n", __clk_get_name(hw->clk),
-		 __clk_get_rate(hw->clk));
-
-	return 0;
-}
-
-/*
- * Clksel parent setting function - not passed in struct clk function
- * pointer - instead, the OMAP clock code currently assumes that any
- * parent-setting clock is a clksel clock, and calls
- * omap2_clksel_set_parent() by default
- */
-
-/**
- * omap2_clksel_set_parent() - change a clock's parent clock
- * @clk: struct clk * of the child clock
- * @new_parent: struct clk * of the new parent clock
- *
- * This function is intended to be called only by the clock framework.
- * Change the parent clock of clock @clk to @new_parent.  This is
- * intended to be used while @clk is disabled.  This function does not
- * currently check the usecount of the clock, so if multiple drivers
- * are using the clock, and the parent is changed, they will all be
- * affected without any notification.  Returns -EINVAL upon error, or
- * 0 upon success.
- */
-int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
-	if (!clk->clksel || !clk->clksel_mask)
-		return -EINVAL;
-
-	_write_clksel_reg(clk, field_val);
-	return 0;
-}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index ca8c42c70db5..9efff4bb291b 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -186,18 +186,6 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
 
 void __init omap2_clk_disable_clkdm_control(void);
 
-/* clkt_clksel.c public functions */
-u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk,
-				unsigned long target_rate,
-				u32 *new_div);
-u8 omap2_clksel_find_parent_index(struct clk_hw *hw);
-unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate);
-long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate,
-				unsigned long *parent_rate);
-int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long parent_rate);
-int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
-
 int omap2_clk_enable_autoidle_all(void);
 int omap2_clk_allow_idle(struct clk *clk);
 int omap2_clk_deny_idle(struct clk *clk);