summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-10-29 15:16:01 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-10-29 15:16:01 -0700
commitb22b6beae6116e3a9c46ced312c626f6737a3fa6 (patch)
treec92228669e0444d91fd1445bc562351fd69b58cc /arch
parent53b7a3b7ec00f207c18e71f58ef2bca48635c622 (diff)
parentc1a92909dbc2090753ff6224971d9b8ae5f93c97 (diff)
downloadlinux-b22b6beae6116e3a9c46ced312c626f6737a3fa6.tar.bz2
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann: "The most noteworthy SoC driver changes this time include: - The TEE subsystem gains an in-kernel interface to access the TEE from device drivers. - The reset controller subsystem gains a driver for the Qualcomm Snapdragon 845 Power Domain Controller. - The Xilinx Zynq platform now has a firmware interface for its platform management unit. This contains a firmware "ioctl" interface that was a little controversial at first, but the version we merged solved that by not exposing arbitrary firmware calls to user space. - The Amlogic Meson platform gains a "canvas" driver that is used for video processing and shared between different high-level drivers. The rest is more of the usual, mostly related to SoC specific power management support and core drivers in drivers/soc: - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new features related to power and reset control. - The Mediatek mt8183 and mt6765 SoC platforms gain support for their respective power management chips. - A new driver for NXP i.MX8, which need a firmware interface for power management. - The SCPI firmware interface now contains support estimating power usage of performance states - The NVIDIA Tegra "pmc" driver gains a few new features, in particular a pinctrl interface for configuring the pads. - Lots of small changes for Qualcomm, in particular the "smem" device driver. - Some cleanups for the TI OMAP series related to their sysc controller. Additional cleanups and bugfixes in SoC specific drivers include the Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits) firmware: tegra: bpmp: Implement suspend/resume support drivers: clk: Add ZynqMP clock driver dt-bindings: clock: Add bindings for ZynqMP clock driver firmware: xilinx: Add zynqmp IOCTL API for device control Documentation: xilinx: Add documentation for eemi APIs MAINTAINERS: imx: include drivers/firmware/imx path firmware: imx: add misc svc support firmware: imx: add SCU firmware driver support reset: Fix potential use-after-free in __of_reset_control_get() dt-bindings: arm: fsl: add scu binding doc soc: fsl: qbman: add interrupt coalesce changing APIs soc: fsl: bman_portals: defer probe after bman's probe soc: fsl: qbman: Use last response to determine valid bit soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers soc: fsl: qbman: Check if CPU is offline when initializing portals reset: qcom: PDC Global (Power Domain Controller) reset controller dt-bindings: reset: Add PDC Global binding for SDM845 SoCs reset: Grammar s/more then once/more than once/ bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-shmobile/Kconfig6
-rw-r--r--arch/arm/mach-shmobile/Makefile1
-rw-r--r--arch/arm/mach-shmobile/setup-r7s9210.c27
-rw-r--r--arch/arm64/Kconfig.platforms1
4 files changed, 35 insertions, 0 deletions
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index aeb2eed08598..94e9431d92b8 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -55,6 +55,12 @@ config ARCH_R7S72100
select SYS_SUPPORTS_SH_MTU2
select RENESAS_OSTM
+config ARCH_R7S9210
+ bool "RZ/A2 (R7S9210)"
+ select PM
+ select PM_GENERIC_DOMAINS
+ select RENESAS_OSTM
+
config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"
select ARCH_RMOBILE
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index b33dc59d8698..5591646cb9bb 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o
+obj-$(CONFIG_ARCH_R7S9210) += setup-r7s9210.o
# CPU reset vector handling objects
cpu-y := platsmp.o headsmp.o
diff --git a/arch/arm/mach-shmobile/setup-r7s9210.c b/arch/arm/mach-shmobile/setup-r7s9210.c
new file mode 100644
index 000000000000..573fb9955e7e
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r7s9210.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * r7s9210 processor support
+ *
+ * Copyright (C) 2018 Renesas Electronics Corporation
+ * Copyright (C) 2018 Chris Brandt
+ *
+ */
+
+#include <linux/kernel.h>
+
+#include <asm/mach/arch.h>
+
+#include "common.h"
+
+static const char *const r7s9210_boards_compat_dt[] __initconst = {
+ "renesas,r7s9210",
+ NULL,
+};
+
+DT_MACHINE_START(R7S72100_DT, "Generic R7S9210 (Flattened Device Tree)")
+ .l2c_aux_val = 0,
+ .l2c_aux_mask = ~0,
+ .init_early = shmobile_init_delay,
+ .init_late = shmobile_init_late,
+ .dt_compat = r7s9210_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 5a89a957641b..138d8eb58374 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -302,6 +302,7 @@ config ARCH_ZX
config ARCH_ZYNQMP
bool "Xilinx ZynqMP Family"
+ select ZYNQMP_FIRMWARE
help
This enables support for Xilinx ZynqMP Family