diff options
| author | Steven Whitehouse <swhiteho@redhat.com> | 2006-10-02 08:45:08 -0400 |
|---|---|---|
| committer | Steven Whitehouse <swhiteho@redhat.com> | 2006-10-02 08:45:08 -0400 |
| commit | 59458f40e25915a355d8b1d701425fe9f4f9ea23 (patch) | |
| tree | f1c9a2934df686e36d75f759ab7313b6f0e0e5f9 /arch | |
| parent | 825f9075d74028d11d7f5932f04e1b5db3022b51 (diff) | |
| parent | d834c16516d1ebec4766fc58c059bf01311e6045 (diff) | |
| download | linux-59458f40e25915a355d8b1d701425fe9f4f9ea23.tar.bz2 | |
Merge branch 'master' into gfs2
Diffstat (limited to 'arch')
343 files changed, 11692 insertions, 11495 deletions
diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h index 2a6e3da8144f..21f71287b6f5 100644 --- a/arch/alpha/kernel/proto.h +++ b/arch/alpha/kernel/proto.h @@ -1,5 +1,7 @@ #include <linux/interrupt.h> +#include <linux/io.h> +#include <asm/pgtable.h> /* Prototypes of functions used across modules here in this directory. */ @@ -181,9 +183,16 @@ extern void titan_dispatch_irqs(u64, struct pt_regs *); extern void switch_to_system_map(void); extern void srm_paging_stop(void); -/* ../mm/remap.c */ -extern int __alpha_remap_area_pages(unsigned long, unsigned long, - unsigned long, unsigned long); +static inline int +__alpha_remap_area_pages(unsigned long address, unsigned long phys_addr, + unsigned long size, unsigned long flags) +{ + pgprot_t prot; + + prot = __pgprot(_PAGE_VALID | _PAGE_ASM | _PAGE_KRE + | _PAGE_KWE | flags); + return ioremap_page_range(address, address + size, phys_addr, prot); +} /* irq.c */ diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c index b191cc759737..581ddcc22fc5 100644 --- a/arch/alpha/kernel/time.c +++ b/arch/alpha/kernel/time.c @@ -54,8 +54,6 @@ #include "proto.h" #include "irq_impl.h" -extern unsigned long wall_jiffies; /* kernel/timer.c */ - static int set_rtc_mmss(unsigned long); DEFINE_SPINLOCK(rtc_lock); @@ -132,7 +130,7 @@ irqreturn_t timer_interrupt(int irq, void *dev, struct pt_regs * regs) nticks = delta >> FIX_SHIFT; while (nticks > 0) { - do_timer(regs); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif @@ -413,7 +411,7 @@ void do_gettimeofday(struct timeval *tv) { unsigned long flags; - unsigned long sec, usec, lost, seq; + unsigned long sec, usec, seq; unsigned long delta_cycles, delta_usec, partial_tick; do { @@ -423,14 +421,13 @@ do_gettimeofday(struct timeval *tv) sec = xtime.tv_sec; usec = (xtime.tv_nsec / 1000); partial_tick = state.partial_tick; - lost = jiffies - wall_jiffies; } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); #ifdef CONFIG_SMP /* Until and unless we figure out how to get cpu cycle counters in sync and keep them there, we can't use the rpcc tricks. */ - delta_usec = lost * (1000000 / HZ); + delta_usec = 0; #else /* * usec = cycles * ticks_per_cycle * 2**48 * 1e6 / (2**48 * ticks) @@ -446,8 +443,7 @@ do_gettimeofday(struct timeval *tv) */ delta_usec = (delta_cycles * state.scaled_ticks_per_cycle - + partial_tick - + (lost << FIX_SHIFT)) * 15625; + + partial_tick) * 15625; delta_usec = ((delta_usec / ((1UL << (FIX_SHIFT-6-1)) * HZ)) + 1) / 2; #endif @@ -480,12 +476,11 @@ do_settimeofday(struct timespec *tv) time. Without this, a full-tick error is possible. */ #ifdef CONFIG_SMP - delta_nsec = (jiffies - wall_jiffies) * (NSEC_PER_SEC / HZ); + delta_nsec = 0; #else delta_nsec = rpcc() - state.last_time; delta_nsec = (delta_nsec * state.scaled_ticks_per_cycle - + state.partial_tick - + ((jiffies - wall_jiffies) << FIX_SHIFT)) * 15625; + + state.partial_tick) * 15625; delta_nsec = ((delta_nsec / ((1UL << (FIX_SHIFT-6-1)) * HZ)) + 1) / 2; delta_nsec *= 1000; #endif diff --git a/arch/alpha/mm/Makefile b/arch/alpha/mm/Makefile index 6edd9a09ea4f..09399c5386cb 100644 --- a/arch/alpha/mm/Makefile +++ b/arch/alpha/mm/Makefile @@ -4,6 +4,6 @@ EXTRA_CFLAGS := -Werror -obj-y := init.o fault.o extable.o remap.o +obj-y := init.o fault.o extable.o obj-$(CONFIG_DISCONTIGMEM) += numa.o diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c index 622dabd84680..8871529a34e2 100644 --- a/arch/alpha/mm/fault.c +++ b/arch/alpha/mm/fault.c @@ -193,7 +193,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* We ran out of memory, or some other thing happened to us that made us unable to handle the page fault gracefully. */ out_of_memory: - if (current->pid == 1) { + if (is_init(current)) { yield(); down_read(&mm->mmap_sem); goto survive; diff --git a/arch/alpha/mm/remap.c b/arch/alpha/mm/remap.c deleted file mode 100644 index a78356c3ead5..000000000000 --- a/arch/alpha/mm/remap.c +++ /dev/null @@ -1,86 +0,0 @@ -#include <linux/vmalloc.h> -#include <asm/pgalloc.h> -#include <asm/cacheflush.h> - -static inline void -remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, - unsigned long phys_addr, unsigned long flags) -{ - unsigned long end; - unsigned long pfn; - - address &= ~PMD_MASK; - end = address + size; - if (end > PMD_SIZE) - end = PMD_SIZE; - if (address >= end) - BUG(); - pfn = phys_addr >> PAGE_SHIFT; - do { - if (!pte_none(*pte)) { - printk("remap_area_pte: page already exists\n"); - BUG(); - } - set_pte(pte, pfn_pte(pfn, - __pgprot(_PAGE_VALID | _PAGE_ASM | - _PAGE_KRE | _PAGE_KWE | flags))); - address += PAGE_SIZE; - pfn++; - pte++; - } while (address && (address < end)); -} - -static inline int -remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size, - unsigned long phys_addr, unsigned long flags) -{ - unsigned long end; - - address &= ~PGDIR_MASK; - end = address + size; - if (end > PGDIR_SIZE) - end = PGDIR_SIZE; - phys_addr -= address; - if (address >= end) - BUG(); - do { - pte_t * pte = pte_alloc_kernel(pmd, address); - if (!pte) - return -ENOMEM; - remap_area_pte(pte, address, end - address, - address + phys_addr, flags); - address = (address + PMD_SIZE) & PMD_MASK; - pmd++; - } while (address && (address < end)); - return 0; -} - -int -__alpha_remap_area_pages(unsigned long address, unsigned long phys_addr, - unsigned long size, unsigned long flags) -{ - pgd_t * dir; - int error = 0; - unsigned long end = address + size; - - phys_addr -= address; - dir = pgd_offset(&init_mm, address); - flush_cache_all(); - if (address >= end) - BUG(); - do { - pmd_t *pmd; - pmd = pmd_alloc(&init_mm, dir, address); - error = -ENOMEM; - if (!pmd) - break; - if (remap_area_pmd(pmd, address, end - address, - phys_addr + address, flags)) - break; - error = 0; - address = (address + PGDIR_SIZE) & PGDIR_MASK; - dir++; - } while (address && (address < end)); - return error; -} - diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f81a62380add..f9362ee9955f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -17,6 +17,10 @@ config ARM Europe. There is an ARM Linux project with a web page at <http://www.arm.linux.org.uk/>. +config GENERIC_TIME + bool + default n + config MMU bool default y @@ -51,6 +55,10 @@ config GENERIC_HARDIRQS bool default y +config TRACE_IRQFLAGS_SUPPORT + bool + default y + config HARDIRQS_SW_RESEND bool default y @@ -91,7 +99,7 @@ config ARCH_MTD_XIP config VECTORS_BASE hex - default 0xffff0000 if MMU + default 0xffff0000 if MMU || CPU_HIGH_VECTOR default DRAM_BASE if REMAP_VECTORS_TO_RAM default 0x00000000 help @@ -198,16 +206,27 @@ config ARCH_IMX help Support for Motorola's i.MX family of processors (MX1, MXL). -config ARCH_IOP3XX - bool "IOP3xx-based" +config ARCH_IOP32X + bool "IOP32x-based" + depends on MMU + select PLAT_IOP + select PCI + help + Support for Intel's 80219 and IOP32X (XScale) family of + processors. + +config ARCH_IOP33X + bool "IOP33x-based" depends on MMU + select PLAT_IOP select PCI help - Support for Intel's IOP3XX (XScale) family of processors. + Support for Intel's IOP33X (XScale) family of processors. config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU + select GENERIC_TIME help Support for Intel's IXP4XX (XScale) family of processors. @@ -308,7 +327,9 @@ source "arch/arm/mach-footbridge/Kconfig" source "arch/arm/mach-integrator/Kconfig" -source "arch/arm/mach-iop3xx/Kconfig" +source "arch/arm/mach-iop32x/Kconfig" + +source "arch/arm/mach-iop33x/Kconfig" source "arch/arm/mach-ixp4xx/Kconfig" @@ -348,6 +369,9 @@ source "arch/arm/mach-netx/Kconfig" config ARCH_ACORN bool +config PLAT_IOP + bool + source arch/arm/mm/Kconfig # bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER @@ -602,6 +626,7 @@ config LEDS_CPU config ALIGNMENT_TRAP bool + depends on CPU_CP15_MMU default y if !ARCH_EBSA110 help ARM processors can not fetch/store information which is not @@ -633,11 +658,12 @@ config ZBOOT_ROM_BSS hex "Compressed ROM boot loader BSS address" default "0" help - The base address of 64KiB of read/write memory in the target - for the ROM-able zImage, which must be available while the - decompressor is running. Platforms which normally make use of - ROM-able zImage formats normally set this to a suitable - value in their defconfig file. + The base address of an area of read/write memory in the target + for the ROM-able zImage which must be available while the + decompressor is running. It must be large enough to hold the + entire decompressed kernel plus an additional 128 KiB. + Platforms which normally make use of ROM-able zImage formats + normally set this to a suitable value in their defconfig file. If ZBOOT_ROM is not enabled, this has no effect. @@ -832,7 +858,7 @@ source "drivers/base/Kconfig" source "drivers/connector/Kconfig" -if ALIGNMENT_TRAP +if ALIGNMENT_TRAP || !CPU_CP15_MMU source "drivers/mtd/Kconfig" endif @@ -844,7 +870,7 @@ source "drivers/block/Kconfig" source "drivers/acorn/block/Kconfig" -if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ +if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \ || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \ || ARCH_IXP23XX diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu index e1574be2ded6..f087376748d1 100644 --- a/arch/arm/Kconfig-nommu +++ b/arch/arm/Kconfig-nommu @@ -25,6 +25,14 @@ config FLASH_SIZE hex 'FLASH Size' if SET_MEM_PARAM default 0x00400000 +config PROCESSOR_ID + hex + default 0x00007700 + depends on !CPU_CP15 + help + If processor has no CP15 register, this processor ID is + used instead of the auto-probing which utilizes the register. + config REMAP_VECTORS_TO_RAM bool 'Install vectors to the begining of RAM' if DRAM_BASE depends on DRAM_BASE diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 92873cdee31f..2a0b2c8a1fe0 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -55,7 +55,12 @@ arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3 # This selects how we optimise for the processor. tune-$(CONFIG_CPU_ARM610) :=-mtune=arm610 tune-$(CONFIG_CPU_ARM710) :=-mtune=arm710 +tune-$(CONFIG_CPU_ARM7TDMI) :=-mtune=arm7tdmi tune-$(CONFIG_CPU_ARM720T) :=-mtune=arm7tdmi +tune-$(CONFIG_CPU_ARM740T) :=-mtune=arm7tdmi +tune-$(CONFIG_CPU_ARM9TDMI) :=-mtune=arm9tdmi +tune-$(CONFIG_CPU_ARM940T) :=-mtune=arm9tdmi +tune-$(CONFIG_CPU_ARM946T) :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi) tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi @@ -101,7 +106,8 @@ endif machine-$(CONFIG_ARCH_INTEGRATOR) := integrator textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 machine-$(CONFIG_ARCH_CLPS711X) := clps711x - machine-$(CONFIG_ARCH_IOP3XX) := iop3xx + machine-$(CONFIG_ARCH_IOP32X) := iop32x + machine-$(CONFIG_ARCH_IOP33X) := iop33x machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_IXP2000) := ixp2000 machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx @@ -157,6 +163,7 @@ core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) core-$(CONFIG_VFP) += arch/arm/vfp/ # If we have a common platform directory, then include it in the build. +core-$(CONFIG_PLAT_IOP) += arch/arm/plat-iop/ core-$(CONFIG_ARCH_OMAP) += arch/arm/plat-omap/ drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 2adc1527e0eb..adddc7131685 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -51,7 +51,11 @@ OBJS += head-at91rm9200.o endif ifeq ($(CONFIG_CPU_BIG_ENDIAN),y) +ifeq ($(CONFIG_CPU_CP15),y) OBJS += big-endian.o +else +# The endian should be set by h/w design. +endif endif # diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 14a9ff9c68df..e5ab51b9cceb 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -20,11 +20,21 @@ #ifdef DEBUG #if defined(CONFIG_DEBUG_ICEDCC) + +#ifdef CONFIG_CPU_V6 + .macro loadsp, rb + .endm + .macro writeb, ch, rb + mcr p14, 0, \ch, c0, c5, 0 + .endm +#else .macro loadsp, rb .endm .macro writeb, ch, rb mcr p14, 0, \ch, c0, c1, 0 .endm +#endif + #else #include <asm/arch/debug-macro.S> @@ -42,12 +52,6 @@ add \rb, \rb, #0x00010000 @ Ser1 #endif .endm -#elif defined(CONFIG_ARCH_IOP331) - .macro loadsp, rb - mov \rb, #0xff000000 - orr \rb, \rb, #0x00ff0000 - orr \rb, \rb, #0x0000f700 @ location of the UART - .endm #elif defined(CONFIG_ARCH_S3C2410) .macro loadsp, rb mov \rb, #0x50000000 @@ -78,9 +82,11 @@ kphex r6, 8 /* processor id */ kputc #':' kphex r7, 8 /* architecture id */ +#ifdef CONFIG_CPU_CP15 kputc #':' mrc p15, 0, r0, c1, c0 kphex r0, 8 /* control reg */ +#endif kputc #'\n' kphex r5, 8 /* decompressed kernel start */ kputc #'-' @@ -503,7 +509,11 @@ call_kernel: bl cache_clean_flush */ call_cache_fn: adr r12, proc_types +#ifdef CONFIG_CPU_CP15 mrc p15, 0, r6, c0, c0 @ get processor ID +#else + ldr r6, =CONFIG_PROCESSOR_ID +#endif 1: ldr r1, [r12, #0] @ get value ldr r2, [r12, #4] @ get mask eor r1, r1, r6 @ (real ^ match) diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index ace3fb5835d9..283891c736c4 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -30,6 +30,25 @@ static void putstr(const char *ptr); #include <asm/arch/uncompress.h> #ifdef CONFIG_DEBUG_ICEDCC + +#ifdef CONFIG_CPU_V6 + +static void icedcc_putc(int ch) +{ + int status, i = 0x4000000; + + do { + if (--i < 0) + return; + + asm volatile ("mrc p14, 0, %0, c0, c1, 0" : "=r" (status)); + } while (status & (1 << 29)); + + asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch)); +} + +#else + static void icedcc_putc(int ch) { int status, i = 0x4000000; @@ -44,6 +63,8 @@ static void icedcc_putc(int ch) asm("mcr p14, 0, %0, c1, c0, 0" : : "r" (ch)); } +#endif + #define putc(ch) icedcc_putc(ch) #define flush() do { } while (0) #endif diff --git a/arch/arm/common/icst307.c b/arch/arm/common/icst307.c index bafe8b19be82..6d094c157540 100644 --- a/arch/arm/common/icst307.c +++ b/arch/arm/common/icst307.c @@ -57,7 +57,7 @@ icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq) break; } while (i < ARRAY_SIZE(idx2s)); - if (i > ARRAY_SIZE(idx2s)) + if (i >= ARRAY_SIZE(idx2s)) return vco; vco.s = idx2s[i]; @@ -119,7 +119,7 @@ icst307_ps_to_vco(const struct icst307_params *p, unsigned long period) break; } while (i < ARRAY_SIZE(idx2s)); - if (i > ARRAY_SIZE(idx2s)) + if (i >= ARRAY_SIZE(idx2s)) return vco; vco.s = idx2s[i]; diff --git a/arch/arm/common/icst525.c b/arch/arm/common/icst525.c index 943ef88c0379..3d377c5bdef6 100644 --- a/arch/arm/common/icst525.c +++ b/arch/arm/common/icst525.c @@ -55,7 +55,7 @@ icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq) break; } while (i < ARRAY_SIZE(idx2s)); - if (i > ARRAY_SIZE(idx2s)) + if (i >= ARRAY_SIZE(idx2s)) return vco; vco.s = idx2s[i]; @@ -118,7 +118,7 @@ icst525_ps_to_vco(const struct icst525_params *p, unsigned long period) break; } while (i < ARRAY_SIZE(idx2s)); - if (i > ARRAY_SIZE(idx2s)) + if (i >= ARRAY_SIZE(idx2s)) return vco; vco.s = idx2s[i]; diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 4e0dcaef6eb2..181ef1ead5b8 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -121,6 +121,13 @@ static struct locomo_dev_info locomo_devices[] = { .offset = 0, .length = 0, }, + { + .devid = LOCOMO_DEVID_SPI, + .irq = {}, + .name = "locomo-spi", + .offset = LOCOMO_SPI, + .length = 0x30, + }, }; @@ -374,7 +381,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc, struct irqdesc *d; void __iomem *mapbase = get_irq_chipdata(irq); - req = locomo_readl(mapbase + LOCOMO_SPIIR) & 0x000F; + req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F; if (req) { irq = LOCOMO_IRQ_SPI_START; d = irq_desc + irq; @@ -391,35 +398,35 @@ static void locomo_spi_ack_irq(unsigned int irq) { void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; - r = locomo_readl(mapbase + LOCOMO_SPIWE); + r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE); r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START)); - locomo_writel(r, mapbase + LOCOMO_SPIWE); + locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE); - r = locomo_readl(mapbase + LOCOMO_SPIIS); + r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIS); r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START)); - locomo_writel(r, mapbase + LOCOMO_SPIIS); + locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIS); - r = locomo_readl(mapbase + LOCOMO_SPIWE); + r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE); r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START)); - locomo_writel(r, mapbase + LOCOMO_SPIWE); + locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE); } static void locomo_spi_mask_irq(unsigned int irq) { void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; - r = locomo_readl(mapbase + LOCOMO_SPIIE); + r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE); r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START)); - locomo_writel(r, mapbase + LOCOMO_SPIIE); + locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE); } static void locomo_spi_unmask_irq(unsigned int irq) { void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; - r = locomo_readl(mapbase + LOCOMO_SPIIE); + r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE); r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START)); - locomo_writel(r, mapbase + LOCOMO_SPIIE); + locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE); } static struct irq_chip locomo_spi_chip = { @@ -814,12 +821,15 @@ static inline struct locomo *locomo_chip_driver(struct locomo_dev *ldev) return (struct locomo *)dev_get_drvdata(ldev->dev.parent); } -void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned int dir) +void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir) { - struct locomo *lchip = locomo_chip_driver(ldev); + struct locomo *lchip = dev_get_drvdata(dev); unsigned long flags; unsigned int r; + if (!lchip) + return; + spin_lock_irqsave(&lchip->lock, flags); r = locomo_readl(lchip->base + LOCOMO_GPD); @@ -836,12 +846,15 @@ void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned in spin_unlock_irqrestore(&lchip->lock, flags); } -unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits) +int locomo_gpio_read_level(struct device *dev, unsigned int bits) { - struct locomo *lchip = locomo_chip_driver(ldev); + struct locomo *lchip = dev_get_drvdata(dev); unsigned long flags; unsigned int ret; + if (!lchip) + return -ENODEV; + spin_lock_irqsave(&lchip->lock, flags); ret = locomo_readl(lchip->base + LOCOMO_GPL); spin_unlock_irqrestore(&lchip->lock, flags); @@ -850,12 +863,15 @@ unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits) return ret; } -unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits) +int locomo_gpio_read_output(struct device *dev, unsigned int bits) { - struct locomo *lchip = locomo_chip_driver(ldev); + struct locomo *lchip = dev_get_drvdata(dev); unsigned long flags; unsigned int ret; + if (!lchip) + return -ENODEV; + spin_lock_irqsave(&lchip->lock, flags); ret = locomo_readl(lchip->base + LOCOMO_GPO); spin_unlock_irqrestore(&lchip->lock, flags); @@ -864,12 +880,15 @@ unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits) return ret; } -void locomo_gpio_write(struct locomo_dev *ldev, unsigned int bits, unsigned int set) +void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set) { - struct locomo *lchip = locomo_chip_driver(ldev); + struct locomo *lchip = dev_get_drvdata(dev); unsigned long flags; unsigned int r; + if (!lchip) + return; + spin_lock_irqsave(&lchip->lock, flags); r = locomo_readl(lchip->base + LOCOMO_GPO); @@ -1058,9 +1077,9 @@ void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf) struct locomo *lchip = locomo_chip_driver(dev); if (vr) - locomo_gpio_write(dev, LOCOMO_GPIO_FL_VR, 1); + locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 1); else - locomo_gpio_write(dev, LOCOMO_GPIO_FL_VR, 0); + locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 0); spin_lock_irqsave(&lchip->lock, flags); locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index 59b5ddec480f..f412dedda684 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -40,6 +40,7 @@ #define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */ #define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */ #define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ + #define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */ #define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ #define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */ @@ -575,6 +576,9 @@ static int corgi_pxa_pm_enter(suspend_state_t state) while (corgi_enter_suspend(alarm_time,alarm_status,state)) {} + if (sharpsl_pm.machinfo->earlyresume) + sharpsl_pm.machinfo->earlyresume(); + dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n"); return 0; diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 2948b4589a8b..3b4802a849e4 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -126,6 +126,7 @@ CONFIG_CRUNCH=y # EP93xx Platforms # CONFIG_MACH_EDB9302=y +CONFIG_MACH_EDB9312=y CONFIG_MACH_EDB9315=y CONFIG_MACH_EDB9315A=y CONFIG_MACH_GESBC9312=y diff --git a/arch/arm/configs/ep80219_defconfig b/arch/arm/configs/iop32x_defconfig index 3c73b707c2f3..0d67f66e78c2 100644 --- a/arch/arm/configs/ep80219_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -1,50 +1,63 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 22:34:12 2005 +# Linux kernel version: 2.6.18-rc7 +# Tue Sep 19 00:30:18 2006 # CONFIG_ARM=y CONFIG_MMU=y -CONFIG_UID16=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -52,24 +65,52 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y # +# Block layer +# +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -CONFIG_ARCH_IOP3XX=y +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +CONFIG_ARCH_IOP32X=y +# CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set @@ -77,28 +118,19 @@ CONFIG_ARCH_IOP3XX=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set # -# IOP3xx Implementation Options +# IOP32x Implementation Options # # -# IOP3xx Platform Types +# IOP32x Platform Types # -# CONFIG_ARCH_IQ80321 is not set +CONFIG_MACH_GLANTANK=y +CONFIG_ARCH_IQ80321=y CONFIG_ARCH_IQ31244=y -# CONFIG_ARCH_IQ80331 is not set -# CONFIG_MACH_IQ80332 is not set -CONFIG_ARCH_EP80219=y -CONFIG_ARCH_IOP321=y -# CONFIG_ARCH_IOP331 is not set - -# -# IOP3xx Chipset Features -# +CONFIG_MACH_N2100=y +CONFIG_PLAT_IOP=y # # Processor Type @@ -109,7 +141,6 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -121,8 +152,7 @@ CONFIG_XSCALE_PMU=y # Bus support # CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -133,6 +163,19 @@ CONFIG_PCI_NAMES=y # Kernel Features # # CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set CONFIG_ALIGNMENT_TRAP=y # @@ -140,7 +183,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200" +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp" # CONFIG_XIP_KERNEL is not set # @@ -166,6 +209,93 @@ CONFIG_BINFMT_AOUT=y # Power management options # # CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -177,6 +307,13 @@ CONFIG_BINFMT_AOUT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -200,6 +337,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -225,18 +363,18 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0xf0000000 -CONFIG_MTD_PHYSMAP_LEN=0x00800000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -245,7 +383,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -261,6 +398,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -272,7 +414,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -284,17 +425,9 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -305,6 +438,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -316,6 +450,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -330,10 +465,12 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -344,25 +481,19 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set @@ -377,8 +508,7 @@ CONFIG_BLK_DEV_MD=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=y -# CONFIG_MD_RAID6 is not set +# CONFIG_MD_RAID456 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y @@ -392,6 +522,9 @@ CONFIG_BLK_DEV_DM=y # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -404,71 +537,8 @@ CONFIG_BLK_DEV_DM=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -481,14 +551,21 @@ CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -526,16 +603,23 @@ CONFIG_E1000_NAPI=y # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -558,6 +642,8 @@ CONFIG_E1000_NAPI=y # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -595,7 +681,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -603,6 +688,7 @@ CONFIG_SOUND_GAMEPORT=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -610,7 +696,9 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -618,6 +706,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -631,8 +720,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -647,6 +736,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -671,14 +761,13 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set CONFIG_I2C_IOP3XX=y -# CONFIG_I2C_ISA is not set # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -689,15 +778,45 @@ CONFIG_I2C_IOP3XX=y # CONFIG_I2C_PCA_ISA is not set # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus # -# CONFIG_I2C_SENSOR is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set @@ -712,36 +831,45 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Other I2C Chip support +# Misc devices # -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # -# Misc devices +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers # # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -751,6 +879,7 @@ CONFIG_I2C_IOP3XX=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # @@ -758,6 +887,7 @@ CONFIG_I2C_IOP3XX=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -769,7 +899,125 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set + +# +# USB DSL modem support +# # # USB Gadget Support @@ -782,10 +1030,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -795,22 +1050,22 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set CONFIG_XFS_FS=y -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -830,12 +1085,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -850,8 +1103,9 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -868,16 +1122,19 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -886,6 +1143,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -905,6 +1163,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -921,11 +1180,34 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set +# CONFIG_FORCED_INLINING is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set # # Security options @@ -946,7 +1228,9 @@ CONFIG_DEBUG_USER=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y diff --git a/arch/arm/configs/iq80331_defconfig b/arch/arm/configs/iop33x_defconfig index 46c79e1efe07..2a8fc153969d 100644 --- a/arch/arm/configs/iq80331_defconfig +++ b/arch/arm/configs/iop33x_defconfig @@ -1,50 +1,63 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 15:13:37 2005 +# Linux kernel version: 2.6.18-rc7 +# Tue Sep 19 00:30:42 2006 # CONFIG_ARM=y CONFIG_MMU=y -CONFIG_UID16=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -52,24 +65,52 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y # +# Block layer +# +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -CONFIG_ARCH_IOP3XX=y +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP32X is not set +CONFIG_ARCH_IOP33X=y # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set @@ -77,28 +118,17 @@ CONFIG_ARCH_IOP3XX=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set # -# IOP3xx Implementation Options +# IOP33x Implementation Options # # -# IOP3xx Platform Types +# IOP33x Platform Types # -# CONFIG_ARCH_IQ80321 is not set -# CONFIG_ARCH_IQ31244 is not set CONFIG_ARCH_IQ80331=y -# CONFIG_MACH_IQ80332 is not set -# CONFIG_ARCH_EP80219 is not set -CONFIG_ARCH_IOP331=y - -# -# IOP3xx Chipset Features -# -CONFIG_IOP331_STEPD=y +CONFIG_MACH_IQ80332=y +CONFIG_PLAT_IOP=y # # Processor Type @@ -109,7 +139,6 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -121,8 +150,7 @@ CONFIG_XSCALE_PMU=y # Bus support # CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -133,6 +161,19 @@ CONFIG_PCI_NAMES=y # Kernel Features # # CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set CONFIG_ALIGNMENT_TRAP=y # @@ -140,7 +181,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200" +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp" # CONFIG_XIP_KERNEL is not set # @@ -166,6 +207,93 @@ CONFIG_BINFMT_AOUT=y # Power management options # # CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -177,6 +305,13 @@ CONFIG_BINFMT_AOUT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -200,6 +335,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -222,6 +358,7 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set @@ -229,18 +366,18 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0xc0000000 -CONFIG_MTD_PHYSMAP_LEN=0x00800000 +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -249,7 +386,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -265,6 +401,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -276,7 +417,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -288,17 +428,9 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -309,6 +441,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -320,6 +453,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -334,10 +468,12 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -348,25 +484,19 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set @@ -381,8 +511,7 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=y -# CONFIG_MD_RAID6 is not set +# CONFIG_MD_RAID456 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y @@ -396,6 +525,9 @@ CONFIG_BLK_DEV_DM=y # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -408,71 +540,8 @@ CONFIG_BLK_DEV_DM=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - +# Network device support # -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -485,6 +554,10 @@ CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set # +# PHY device support +# + +# # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set @@ -501,14 +574,20 @@ CONFIG_E1000_NAPI=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -531,6 +610,8 @@ CONFIG_E1000_NAPI=y # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -568,7 +649,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -576,6 +656,7 @@ CONFIG_SOUND_GAMEPORT=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -583,7 +664,9 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -591,6 +674,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -604,8 +688,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -620,6 +704,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -644,14 +729,13 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set CONFIG_I2C_IOP3XX=y -# CONFIG_I2C_ISA is not set # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -662,15 +746,45 @@ CONFIG_I2C_IOP3XX=y # CONFIG_I2C_PCA_ISA is not set # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -# CONFIG_I2C_SENSOR is not set +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set @@ -685,36 +799,45 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Other I2C Chip support +# Misc devices # -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # -# Misc devices +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers # # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -724,6 +847,7 @@ CONFIG_I2C_IOP3XX=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # @@ -731,6 +855,7 @@ CONFIG_I2C_IOP3XX=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -742,9 +867,14 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -755,10 +885,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -768,22 +905,22 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set CONFIG_XFS_FS=y -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -803,12 +940,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -834,16 +969,19 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -852,6 +990,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -871,6 +1010,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -887,11 +1027,34 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set +# CONFIG_FORCED_INLINING is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set # # Security options @@ -912,5 +1075,7 @@ CONFIG_DEBUG_USER=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set # CONFIG_CRC32 is not set # CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y diff --git a/arch/arm/configs/iq31244_defconfig b/arch/arm/configs/iq31244_defconfig deleted file mode 100644 index 32467160a6df..000000000000 --- a/arch/arm/configs/iq31244_defconfig +++ /dev/null @@ -1,922 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 02:10:38 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -CONFIG_ARCH_IOP3XX=y -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set - -# -# IOP3xx Implementation Options -# - -# -# IOP3xx Platform Types -# -# CONFIG_ARCH_IQ80321 is not set -CONFIG_ARCH_IQ31244=y -# CONFIG_ARCH_IQ80331 is not set -# CONFIG_MACH_IQ80332 is not set -# CONFIG_ARCH_EP80219 is not set -CONFIG_ARCH_IOP321=y -# CONFIG_ARCH_IOP331 is not set - -# -# IOP3xx Chipset Features -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_XSCALE_PMU=y - -# -# Bus support -# -CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0xf0000000 -CONFIG_MTD_PHYSMAP_LEN=0x00800000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -# CONFIG_MD_LINEAR is not set -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -# CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=y -# CONFIG_MD_RAID6 is not set -# CONFIG_MD_MULTIPATH is not set -# CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_CRYPT is not set -# CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set -# CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=y -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -CONFIG_I2C_IOP3XX=y -# CONFIG_I2C_ISA is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -CONFIG_XFS_FS=y -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_USER=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/iq80321_defconfig b/arch/arm/configs/iq80321_defconfig deleted file mode 100644 index b000da753c41..000000000000 --- a/arch/arm/configs/iq80321_defconfig +++ /dev/null @@ -1,843 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 13:24:10 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -CONFIG_ARCH_IOP3XX=y -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set - -# -# IOP3xx Implementation Options -# - -# -# IOP3xx Platform Types -# -CONFIG_ARCH_IQ80321=y -# CONFIG_ARCH_IQ31244 is not set -# CONFIG_ARCH_IQ80331 is not set -# CONFIG_MACH_IQ80332 is not set -# CONFIG_ARCH_EP80219 is not set -CONFIG_ARCH_IOP321=y -# CONFIG_ARCH_IOP331 is not set - -# -# IOP3xx Chipset Features -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_XSCALE_PMU=y - -# -# Bus support -# -CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0xf0000000 -CONFIG_MTD_PHYSMAP_LEN=0x00800000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=1 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=y -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -CONFIG_I2C_IOP3XX=y -# CONFIG_I2C_ISA is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -CONFIG_XFS_FS=y -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_USER=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/iq80332_defconfig b/arch/arm/configs/iq80332_defconfig deleted file mode 100644 index 11959b705d82..000000000000 --- a/arch/arm/configs/iq80332_defconfig +++ /dev/null @@ -1,916 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 17:33:39 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -CONFIG_ARCH_IOP3XX=y -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set - -# -# IOP3xx Implementation Options -# - -# -# IOP3xx Platform Types -# -# CONFIG_ARCH_IQ80321 is not set -# CONFIG_ARCH_IQ31244 is not set -# CONFIG_ARCH_IQ80331 is not set -CONFIG_MACH_IQ80332=y -# CONFIG_ARCH_EP80219 is not set -CONFIG_ARCH_IOP331=y - -# -# IOP3xx Chipset Features -# -# CONFIG_IOP331_STEPD is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_XSCALE_PMU=y - -# -# Bus support -# -CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_GEOMETRY is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0xc0000000 -CONFIG_MTD_PHYSMAP_LEN=0x00800000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=1 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -# CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=y -# CONFIG_MD_RAID6 is not set -# CONFIG_MD_MULTIPATH is not set -# CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_CRYPT is not set -# CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set -# CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=y -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -CONFIG_I2C_IOP3XX=y -# CONFIG_I2C_ISA is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -CONFIG_XFS_FS=y -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_USER=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC32 is not set -# CONFIG_LIBCRC32C is not set diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index f20814e6f497..a83222641045 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,14 +1,19 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-git9 -# Sun Jun 25 23:56:32 2006 +# Linux kernel version: 2.6.18 +# Wed Sep 20 20:27:31 2006 # CONFIG_ARM=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -26,14 +31,15 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -46,6 +52,8 @@ CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -84,7 +92,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set @@ -94,7 +102,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set @@ -122,13 +131,18 @@ CONFIG_ARCH_SMDK2410=y CONFIG_ARCH_S3C2440=y CONFIG_SMDK2440_CPU2440=y CONFIG_SMDK2440_CPU2442=y +CONFIG_MACH_S3C2413=y CONFIG_MACH_SMDK2413=y CONFIG_MACH_VR1000=y CONFIG_MACH_RX3715=y CONFIG_MACH_OTOM=y CONFIG_MACH_NEXCODER_2440=y +CONFIG_MACH_VSTMS=y CONFIG_S3C2410_CLOCK=y +CONFIG_S3C2410_PM=y +CONFIG_CPU_S3C2410_DMA=y CONFIG_CPU_S3C2410=y +CONFIG_S3C2412_PM=y CONFIG_CPU_S3C2412=y CONFIG_CPU_S3C244X=y CONFIG_CPU_S3C2440=y @@ -156,7 +170,7 @@ CONFIG_S3C2410_LOWLEVEL_UART_PORT=0 CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_ARM926T=y -CONFIG_CPU_32v4=y +CONFIG_CPU_32v4T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV4T=y CONFIG_CPU_ABRT_EV5TJ=y @@ -200,6 +214,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set CONFIG_ALIGNMENT_TRAP=y # @@ -304,7 +319,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -460,6 +474,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m @@ -640,6 +655,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_SERIAL_NONSTANDARD=y # CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set @@ -716,6 +732,7 @@ CONFIG_S3C2410_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_S3C2410_RTC=y # CONFIG_DTLK is not set @@ -857,12 +874,12 @@ CONFIG_VIDEO_V4L2=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set -CONFIG_FB_FIRMWARE_EDID=y # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set @@ -995,7 +1012,7 @@ CONFIG_USB_MON=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set -# CONFIG_USB_CY7C63 is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set @@ -1095,6 +1112,7 @@ CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -1202,14 +1220,19 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y @@ -1251,3 +1274,4 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y diff --git a/arch/arm/kernel/apm.c b/arch/arm/kernel/apm.c index 33c55689f999..ecf4f9472d94 100644 --- a/arch/arm/kernel/apm.c +++ b/arch/arm/kernel/apm.c @@ -25,6 +25,7 @@ #include <linux/list.h> #include <linux/init.h> #include <linux/completion.h> +#include <linux/kthread.h> #include <asm/apm.h> /* apm_power_info */ #include <asm/system.h> @@ -80,7 +81,7 @@ struct apm_user { */ static int suspends_pending; static int apm_disabled; -static int arm_apm_active; +static struct task_struct *kapmd_tsk; static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue); static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue); @@ -97,7 +98,6 @@ static LIST_HEAD(apm_user_list); * to be suspending the system. */ static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait); -static DECLARE_COMPLETION(kapmd_exit); static DEFINE_SPINLOCK(kapmd_queue_lock); static struct apm_queue kapmd_queue; @@ -468,16 +468,13 @@ static int apm_get_info(char *buf, char **start, off_t fpos, int length) static int kapmd(void *arg) { - daemonize("kapmd"); - current->flags |= PF_NOFREEZE; - do { apm_event_t event; wait_event_interruptible(kapmd_wait, - !queue_empty(&kapmd_queue) || !arm_apm_active); + !queue_empty(&kapmd_queue) || kthread_should_stop()); - if (!arm_apm_active) + if (kthread_should_stop()) break; spin_lock_irq(&kapmd_queue_lock); @@ -508,7 +505,7 @@ static int kapmd(void *arg) } } while (1); - complete_and_exit(&kapmd_exit, 0); + return 0; } static int __init apm_init(void) @@ -520,13 +517,14 @@ static int __init apm_init(void) return -ENODEV; } - arm_apm_active = 1; - - ret = kernel_thread(kapmd, NULL, CLONE_KERNEL); - if (ret < 0) { - arm_apm_active = 0; + kapmd_tsk = kthread_create(kapmd, NULL, "kapmd"); + if (IS_ERR(kapmd_tsk)) { + ret = PTR_ERR(kapmd_tsk); + kapmd_tsk = NULL; return ret; } + kapmd_tsk->flags |= PF_NOFREEZE; + wake_up_process(kapmd_tsk); #ifdef CONFIG_PROC_FS create_proc_info_entry("apm", 0, NULL, apm_get_info); @@ -535,10 +533,7 @@ static int __init apm_init(void) ret = misc_register(&apm_device); if (ret != 0) { remove_proc_entry("apm", NULL); - - arm_apm_active = 0; - wake_up(&kapmd_wait); - wait_for_completion(&kapmd_exit); + kthread_stop(kapmd_tsk); } return ret; @@ -549,9 +544,7 @@ static void __exit apm_exit(void) misc_deregister(&apm_device); remove_proc_entry("apm", NULL); - arm_apm_active = 0; - wake_up(&kapmd_wait); - wait_for_completion(&kapmd_exit); + kthread_stop(kapmd_tsk); } module_init(apm_init); diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index a5747e58a9dc..5617566477b4 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -21,6 +21,36 @@ #if defined(CONFIG_DEBUG_ICEDCC) @@ debug using ARM EmbeddedICE DCC channel + +#if defined(CONFIG_CPU_V6) + + .macro addruart, rx + .endm + + .macro senduart, rd, rx + mcr p14, 0, \rd, c0, c5, 0 + .endm + + .macro busyuart, rd, rx +1001: + mrc p14, 0, \rx, c0, c1, 0 + tst \rx, #0x20000000 + beq 1001b + .endm + + .macro waituart, rd, rx + mov \rd, #0x2000000 +1001: + subs \rd, \rd, #1 + bmi 1002f + mrc p14, 0, \rx, c0, c1, 0 + tst \rx, #0x20000000 + bne 1001b +1002: + .endm + +#else + .macro addruart, rx .endm @@ -46,9 +76,12 @@ bne 1001b 1002: .endm + +#endif /* CONFIG_CPU_V6 */ + #else #include <asm/arch/debug-macro.S> -#endif +#endif /* CONFIG_DEBUG_ICEDCC */ /* * Useful debugging routines diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index eca248d9eba4..3e14b1348c0b 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -295,7 +295,7 @@ ecard_task(void * unused) */ static void ecard_call(struct ecard_request *req) { - DECLARE_COMPLETION(completion); + DECLARE_COMPLETION_ONSTACK(completion); req->complete = &completion; diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index de4e33137901..bd623b73445f 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -191,6 +191,9 @@ __dabt_svc: __irq_svc: svc_entry +#ifdef CONFIG_TRACE_IRQFLAGS + bl trace_hardirqs_off +#endif #ifdef CONFIG_PREEMPT get_thread_info tsk ldr r8, [tsk, #TI_PREEMPT] @ get preempt count @@ -211,6 +214,10 @@ preempt_return: #endif ldr r0, [sp, #S_PSR] @ irqs are already disabled msr spsr_cxsf, r0 +#ifdef CONFIG_TRACE_IRQFLAGS + tst r0, #PSR_I_BIT + bleq trace_hardirqs_on +#endif ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr .ltorg @@ -398,6 +405,9 @@ __dabt_usr: __irq_usr: usr_entry +#ifdef CONFIG_TRACE_IRQFLAGS + bl trace_hardirqs_off +#endif get_thread_info tsk #ifdef CONFIG_PREEMPT ldr r8, [tsk, #TI_PREEMPT] @ get preempt count @@ -412,6 +422,9 @@ __irq_usr: teq r0, r7 strne r0, [r0, -r0] #endif +#ifdef CONFIG_TRACE_IRQFLAGS + bl trace_hardirqs_on +#endif mov why, #0 b ret_to_user diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index ac9eb3d30518..f359a189dcf2 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -9,7 +9,6 @@ * published by the Free Software Foundation. * * Common kernel startup code (non-paged MM) - * for 32-bit CPUs which has a process ID register(CP15). * */ #include <linux/linkage.h> @@ -40,7 +39,11 @@ ENTRY(stext) msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode @ and irqs disabled +#ifndef CONFIG_CPU_CP15 + ldr r9, =CONFIG_PROCESSOR_ID +#else mrc p15, 0, r9, c0, c0 @ get processor id +#endif bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? beq __error_p @ yes, error 'p' @@ -58,6 +61,7 @@ ENTRY(stext) */ .type __after_proc_init, %function __after_proc_init: +#ifdef CONFIG_CPU_CP15 mrc p15, 0, r0, c1, c0, 0 @ read control reg #ifdef CONFIG_ALIGNMENT_TRAP orr r0, r0, #CR_A @@ -73,7 +77,13 @@ __after_proc_init: #ifdef CONFIG_CPU_ICACHE_DISABLE bic r0, r0, #CR_I #endif +#ifdef CONFIG_CPU_HIGH_VECTOR + orr r0, r0, #CR_V +#else + bic r0, r0, #CR_V +#endif mcr p15, 0, r0, c1, c0, 0 @ write control reg +#endif /* CONFIG_CPU_CP15 */ mov pc, r13 @ clear the BSS and jump @ to start_kernel diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 298363d97047..1b061583408e 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -2,6 +2,7 @@ * linux/arch/arm/kernel/module.c * * Copyright (C) 2002 Russell King. + * Modified for nommu by Hyok S. Choi * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -32,6 +33,7 @@ extern void _etext; #define MODULE_START (((unsigned long)&_etext + ~PGDIR_MASK) & PGDIR_MASK) #endif +#ifdef CONFIG_MMU void *module_alloc(unsigned long size) { struct vm_struct *area; @@ -46,6 +48,12 @@ void *module_alloc(unsigned long size) return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL); } +#else /* CONFIG_MMU */ +void *module_alloc(unsigned long size) +{ + return size == 0 ? NULL : vmalloc(size); +} +#endif /* !CONFIG_MMU */ void module_free(struct module *module, void *region) { diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 3079535afccd..bf35c178a877 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -221,16 +221,26 @@ void __show_regs(struct pt_regs *regs) processor_modes[processor_mode(regs)], thumb_mode(regs) ? " (T)" : "", get_fs() == get_ds() ? "kernel" : "user"); +#if CONFIG_CPU_CP15 { - unsigned int ctrl, transbase, dac; + unsigned int ctrl; __asm__ ( " mrc p15, 0, %0, c1, c0\n" - " mrc p15, 0, %1, c2, c0\n" - " mrc p15, 0, %2, c3, c0\n" - : "=r" (ctrl), "=r" (transbase), "=r" (dac)); - printk("Control: %04X Table: %08X DAC: %08X\n", - ctrl, transbase, dac); + : "=r" (ctrl)); + printk("Control: %04X\n", ctrl); } +#ifdef CONFIG_CPU_CP15_MMU + { + unsigned int transbase, dac; + __asm__ ( + " mrc p15, 0, %0, c2, c0\n" + " mrc p15, 0, %1, c3, c0\n" + : "=r" (transbase), "=r" (dac)); + printk("Table: %08X DAC: %08X\n", + transbase, dac); + } +#endif +#endif } void show_regs(struct pt_regs * regs) diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 09a67d771857..b030320b17c7 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -37,8 +37,6 @@ */ struct sys_timer *system_timer; -extern unsigned long wall_jiffies; - /* this needs a better home */ DEFINE_SPINLOCK(rtc_lock); @@ -69,10 +67,12 @@ EXPORT_SYMBOL(profile_pc); */ int (*set_rtc)(void); +#ifndef CONFIG_GENERIC_TIME static unsigned long dummy_gettimeoffset(void) { return 0; } +#endif /* * Scheduler clock - returns current time in nanosec units. @@ -230,20 +230,16 @@ static inline void do_leds(void) #define do_leds() #endif +#ifndef CONFIG_GENERIC_TIME void do_gettimeofday(struct timeval *tv) { unsigned long flags; unsigned long seq; - unsigned long usec, sec, lost; + unsigned long usec, sec; do { seq = read_seqbegin_irqsave(&xtime_lock, flags); usec = system_timer->offset(); - - lost = jiffies - wall_jiffies; - if (lost) - usec += lost * USECS_PER_JIFFY; - sec = xtime.tv_sec; usec += xtime.tv_nsec / 1000; } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); @@ -276,7 +272,6 @@ int do_settimeofday(struct timespec *tv) * done, and then undo it! */ nsec -= system_timer->offset() * NSEC_PER_USEC; - nsec -= (jiffies - wall_jiffies) * TICK_NSEC; wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); @@ -291,6 +286,7 @@ int do_settimeofday(struct timespec *tv) } EXPORT_SYMBOL(do_settimeofday); +#endif /* !CONFIG_GENERIC_TIME */ /** * save_time_delta - Save the offset between system time and RTC time @@ -333,7 +329,7 @@ void timer_tick(struct pt_regs *regs) profile_tick(CPU_PROFILING, regs); do_leds(); do_set_rtc(); - do_timer(regs); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif @@ -500,8 +496,10 @@ device_initcall(timer_init_sysfs); void __init time_init(void) { +#ifndef CONFIG_GENERIC_TIME if (system_timer->offset == NULL) system_timer->offset = dummy_gettimeoffset; +#endif system_timer->init(); #ifdef CONFIG_NO_IDLE_HZ diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index aeeed806f991..bede380c07a9 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -191,7 +191,7 @@ void show_stack(struct task_struct *tsk, unsigned long *sp) if (tsk != current) fp = thread_saved_fp(tsk); else - asm("mov%? %0, fp" : "=r" (fp)); + asm("mov %0, fp" : "=r" (fp) : : "cc"); c_backtrace(fp, 0x10); barrier(); diff --git a/arch/arm/mach-at91rm9200/at91rm9200.c b/arch/arm/mach-at91rm9200/at91rm9200.c index 0985b1c42c7c..dcf6136fedf9 100644 --- a/arch/arm/mach-at91rm9200/at91rm9200.c +++ b/arch/arm/mach-at91rm9200/at91rm9200.c @@ -17,6 +17,7 @@ #include <asm/hardware.h> #include "generic.h" +#include "clock.h" static struct map_desc at91rm9200_io_desc[] __initdata = { { @@ -26,87 +27,224 @@ static struct map_desc at91rm9200_io_desc[] __initdata = { .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_SPI, - .pfn = __phys_to_pfn(AT91_BASE_SPI), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_SSC2, - .pfn = __phys_to_pfn(AT91_BASE_SSC2), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_SSC1, - .pfn = __phys_to_pfn(AT91_BASE_SSC1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_SSC0, - .pfn = __phys_to_pfn(AT91_BASE_SSC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_US3, - .pfn = __phys_to_pfn(AT91_BASE_US3), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_US2, - .pfn = __phys_to_pfn(AT91_BASE_US2), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_US1, - .pfn = __phys_to_pfn(AT91_BASE_US1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_US0, - .pfn = __phys_to_pfn(AT91_BASE_US0), + .pfn = __phys_to_pfn(AT91RM9200_BASE_SPI), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_EMAC, - .pfn = __phys_to_pfn(AT91_BASE_EMAC), + .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_TWI, - .pfn = __phys_to_pfn(AT91_BASE_TWI), + .pfn = __phys_to_pfn(AT91RM9200_BASE_TWI), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_MCI, - .pfn = __phys_to_pfn(AT91_BASE_MCI), + .pfn = __phys_to_pfn(AT91RM9200_BASE_MCI), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_UDP, - .pfn = __phys_to_pfn(AT91_BASE_UDP), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_TCB1, - .pfn = __phys_to_pfn(AT91_BASE_TCB1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_VA_BASE_TCB0, - .pfn = __phys_to_pfn(AT91_BASE_TCB0), + .pfn = __phys_to_pfn(AT91RM9200_BASE_UDP), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_SRAM_VIRT_BASE, - .pfn = __phys_to_pfn(AT91_SRAM_BASE), - .length = AT91_SRAM_SIZE, + .pfn = __phys_to_pfn(AT91RM9200_SRAM_BASE), + .length = AT91RM9200_SRAM_SIZE, .type = MT_DEVICE, }, }; -void __init at91rm9200_map_io(void) +/* -------------------------------------------------------------------- + * Clocks + * -------------------------------------------------------------------- */ + +/* + * The peripheral clocks. + */ +static struct clk udc_clk = { + .name = "udc_clk", + .pmc_mask = 1 << AT91RM9200_ID_UDP, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ohci_clk = { + .name = "ohci_clk", + .pmc_mask = 1 << AT91RM9200_ID_UHP, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ether_clk = { + .name = "ether_clk", + .pmc_mask = 1 << AT91RM9200_ID_EMAC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc_clk = { + .name = "mci_clk", + .pmc_mask = 1 << AT91RM9200_ID_MCI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi_clk = { + .name = "twi_clk", + .pmc_mask = 1 << AT91RM9200_ID_TWI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .pmc_mask = 1 << AT91RM9200_ID_US0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .pmc_mask = 1 << AT91RM9200_ID_US1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .pmc_mask = 1 << AT91RM9200_ID_US2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart3_clk = { + .name = "usart3_clk", + .pmc_mask = 1 << AT91RM9200_ID_US3, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi_clk = { + .name = "spi_clk", + .pmc_mask = 1 << AT91RM9200_ID_SPI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioA_clk = { + .name = "pioA_clk", + .pmc_mask = 1 << AT91RM9200_ID_PIOA, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioB_clk = { + .name = "pioB_clk", + .pmc_mask = 1 << AT91RM9200_ID_PIOB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioC_clk = { + .name = "pioC_clk", + .pmc_mask = 1 << AT91RM9200_ID_PIOC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioD_clk = { + .name = "pioD_clk", + .pmc_mask = 1 << AT91RM9200_ID_PIOD, + .type = CLK_TYPE_PERIPHERAL, +}; + +static struct clk *periph_clocks[] __initdata = { + &pioA_clk, + &pioB_clk, + &pioC_clk, + &pioD_clk, + &usart0_clk, + &usart1_clk, + &usart2_clk, + &usart3_clk, + &mmc_clk, + &udc_clk, + &twi_clk, + &spi_clk, + // ssc 0 .. ssc2 + // tc0 .. tc5 + &ohci_clk, + ðer_clk, + // irq0 .. irq6 +}; + +/* + * The four programmable clocks. + * You must configure pin multiplexing to bring these signals out. + */ +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 0, +}; +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 1, +}; +static struct clk pck2 = { + .name = "pck2", + .pmc_mask = AT91_PMC_PCK2, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 2, +}; +static struct clk pck3 = { + .name = "pck3", + .pmc_mask = AT91_PMC_PCK3, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 3, +}; + +static void __init at91rm9200_register_clocks(void) { + int i; + + for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) + clk_register(periph_clocks[i]); + + clk_register(&pck0); + clk_register(&pck1); + clk_register(&pck2); + clk_register(&pck3); +} + +/* -------------------------------------------------------------------- + * GPIO + * -------------------------------------------------------------------- */ + +static struct at91_gpio_bank at91rm9200_gpio[] = { + { + .id = AT91RM9200_ID_PIOA, + .offset = AT91_PIOA, + .clock = &pioA_clk, + }, { + .id = AT91RM9200_ID_PIOB, + .offset = AT91_PIOB, + .clock = &pioB_clk, + }, { + .id = AT91RM9200_ID_PIOC, + .offset = AT91_PIOC, + .clock = &pioC_clk, + }, { + .id = AT91RM9200_ID_PIOD, + .offset = AT91_PIOD, + .clock = &pioD_clk, + } +}; + +/* -------------------------------------------------------------------- + * AT91RM9200 processor initialization + * -------------------------------------------------------------------- */ +void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks) +{ + /* Map peripherals */ iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); + + /* Init clock subsystem */ + at91_clock_init(main_clock); + + /* Register the processor-specific clocks */ + at91rm9200_register_clocks(); + + /* Initialize GPIO subsystem */ + at91_gpio_init(at91rm9200_gpio, banks); } + +/* -------------------------------------------------------------------- + * Interrupt initialization + * -------------------------------------------------------------------- */ + /* * The default interrupt priority levels (0 = lowest, 7 = highest). */ @@ -145,10 +283,14 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { 0 /* Advanced Interrupt Controller (IRQ6) */ }; -void __init at91rm9200_init_irq(unsigned int priority[NR_AIC_IRQS]) +void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS]) { if (!priority) priority = at91rm9200_default_irq_priority; + /* Initialize the AIC interrupt controller */ at91_aic_init(priority); + + /* Enable GPIO interrupts */ + at91_gpio_irq_setup(); } diff --git a/arch/arm/mach-at91rm9200/board-1arm.c b/arch/arm/mach-at91rm9200/board-1arm.c index dc79e0992af7..36eecd7161f5 100644 --- a/arch/arm/mach-at91rm9200/board-1arm.c +++ b/arch/arm/mach-at91rm9200/board-1arm.c @@ -34,20 +34,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init onearm_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(PQFP_GPIO_BANKS); -} /* * Serial port configuration. @@ -62,15 +53,18 @@ static struct at91_uart_config __initdata onearm_uart_config = { static void __init onearm_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 18.432 MHz crystal */ - at91_clock_init(18432000); + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_PQFP); /* Setup the serial ports and console */ at91_init_serial(&onearm_uart_config); } +static void __init onearm_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + static struct at91_eth_data __initdata onearm_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, diff --git a/arch/arm/mach-at91rm9200/board-carmeva.c b/arch/arm/mach-at91rm9200/board-carmeva.c index 2c138b542ebe..50e513681ae6 100644 --- a/arch/arm/mach-at91rm9200/board-carmeva.c +++ b/arch/arm/mach-at91rm9200/board-carmeva.c @@ -35,20 +35,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init carmeva_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(BGA_GPIO_BANKS); -} /* * Serial port configuration. @@ -63,15 +54,19 @@ static struct at91_uart_config __initdata carmeva_uart_config = { static void __init carmeva_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 20.000 MHz crystal */ - at91_clock_init(20000000); + /* Initialize processor: 20.000 MHz crystal */ + at91rm9200_initialize(20000000, AT91RM9200_BGA); /* Setup the serial ports and console */ at91_init_serial(&carmeva_uart_config); } +static void __init carmeva_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + + static struct at91_eth_data __initdata carmeva_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c index 794d3fbb449b..8eeae491ce71 100644 --- a/arch/arm/mach-at91rm9200/board-csb337.c +++ b/arch/arm/mach-at91rm9200/board-csb337.c @@ -34,20 +34,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init csb337_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(BGA_GPIO_BANKS); -} /* * Serial port configuration. @@ -62,10 +53,8 @@ static struct at91_uart_config __initdata csb337_uart_config = { static void __init csb337_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 3.6864 MHz crystal */ - at91_clock_init(3686400); + /* Initialize processor: 3.6864 MHz crystal */ + at91rm9200_initialize(3686400, AT91RM9200_BGA); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -74,6 +63,11 @@ static void __init csb337_map_io(void) at91_init_serial(&csb337_uart_config); } +static void __init csb337_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + static struct at91_eth_data __initdata csb337_eth_data = { .phy_irq_pin = AT91_PIN_PC2, .is_rmii = 0, diff --git a/arch/arm/mach-at91rm9200/board-csb637.c b/arch/arm/mach-at91rm9200/board-csb637.c index c8b6f334246a..a29fa0e822ce 100644 --- a/arch/arm/mach-at91rm9200/board-csb637.c +++ b/arch/arm/mach-at91rm9200/board-csb637.c @@ -33,20 +33,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init csb637_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(BGA_GPIO_BANKS); -} /* * Serial port configuration. @@ -61,10 +52,8 @@ static struct at91_uart_config __initdata csb637_uart_config = { static void __init csb637_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 3.6864 MHz crystal */ - at91_clock_init(3686400); + /* Initialize processor: 3.6864 MHz crystal */ + at91rm9200_initialize(3686400, AT91RM9200_BGA); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); @@ -73,6 +62,11 @@ static void __init csb637_map_io(void) at91_init_serial(&csb637_uart_config); } +static void __init csb637_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + static struct at91_eth_data __initdata csb637_eth_data = { .phy_irq_pin = AT91_PIN_PC0, .is_rmii = 0, diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91rm9200/board-dk.c index 65873037e02a..c699f3984d4b 100644 --- a/arch/arm/mach-at91rm9200/board-dk.c +++ b/arch/arm/mach-at91rm9200/board-dk.c @@ -37,20 +37,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init dk_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(BGA_GPIO_BANKS); -} /* * Serial port configuration. @@ -65,10 +56,8 @@ static struct at91_uart_config __initdata dk_uart_config = { static void __init dk_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 18.432 MHz crystal */ - at91_clock_init(18432000); + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_BGA); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); @@ -77,6 +66,11 @@ static void __init dk_map_io(void) at91_init_serial(&dk_uart_config); } +static void __init dk_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + static struct at91_eth_data __initdata dk_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -128,6 +122,29 @@ static struct spi_board_info dk_spi_devices[] = { #endif }; +static struct mtd_partition __initdata dk_nand_partition[] = { + { + .name = "NAND Partition 1", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition *nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(dk_nand_partition); + return dk_nand_partition; +} + +static struct at91_nand_data __initdata dk_nand_data = { + .ale = 22, + .cle = 21, + .det_pin = AT91_PIN_PB1, + .rdy_pin = AT91_PIN_PC2, + // .enable_pin = ... not there + .partition_info = nand_partitions, +}; + static void __init dk_board_init(void) { /* Serial */ @@ -153,6 +170,8 @@ static void __init dk_board_init(void) at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ at91_add_device_mmc(&dk_mmc_data); #endif + /* NAND */ + at91_add_device_nand(&dk_nand_data); /* VGA */ // dk_add_device_video(); } diff --git a/arch/arm/mach-at91rm9200/board-eb9200.c b/arch/arm/mach-at91rm9200/board-eb9200.c index a3e2df968a66..c6e0d51fbea0 100644 --- a/arch/arm/mach-at91rm9200/board-eb9200.c +++ b/arch/arm/mach-at91rm9200/board-eb9200.c @@ -35,20 +35,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init eb9200_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(BGA_GPIO_BANKS); -} /* * Serial port configuration. @@ -63,15 +54,18 @@ static struct at91_uart_config __initdata eb9200_uart_config = { static void __init eb9200_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 18.432 MHz crystal */ - at91_clock_init(18432000); + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_BGA); /* Setup the serial ports and console */ at91_init_serial(&eb9200_uart_config); } +static void __init eb9200_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + static struct at91_eth_data __initdata eb9200_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91rm9200/board-ek.c index 868192351dda..830eb7932178 100644 --- a/arch/arm/mach-at91rm9200/board-ek.c +++ b/arch/arm/mach-at91rm9200/board-ek.c @@ -37,20 +37,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init ek_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(BGA_GPIO_BANKS); -} /* * Serial port configuration. @@ -65,10 +56,8 @@ static struct at91_uart_config __initdata ek_uart_config = { static void __init ek_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 18.432 MHz crystal */ - at91_clock_init(18432000); + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_BGA); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); @@ -77,6 +66,11 @@ static void __init ek_map_io(void) at91_init_serial(&ek_uart_config); } +static void __init ek_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + static struct at91_eth_data __initdata ek_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, diff --git a/arch/arm/mach-at91rm9200/board-kafa.c b/arch/arm/mach-at91rm9200/board-kafa.c index bf760c5e0c46..91e301924f2c 100644 --- a/arch/arm/mach-at91rm9200/board-kafa.c +++ b/arch/arm/mach-at91rm9200/board-kafa.c @@ -34,20 +34,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init kafa_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(PQFP_GPIO_BANKS); -} /* * Serial port configuration. @@ -62,10 +53,8 @@ static struct at91_uart_config __initdata kafa_uart_config = { static void __init kafa_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 18.432 MHz crystal */ - at91_clock_init(18432000); + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_PQFP); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); @@ -74,6 +63,11 @@ static void __init kafa_map_io(void) at91_init_serial(&kafa_uart_config); } +static void __init kafa_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + static struct at91_eth_data __initdata kafa_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 0, diff --git a/arch/arm/mach-at91rm9200/board-kb9202.c b/arch/arm/mach-at91rm9200/board-kb9202.c index f06d2b54cc9a..272fe43bceca 100644 --- a/arch/arm/mach-at91rm9200/board-kb9202.c +++ b/arch/arm/mach-at91rm9200/board-kb9202.c @@ -35,20 +35,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/hardware.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" -static void __init kb9202_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(PQFP_GPIO_BANKS); -} /* * Serial port configuration. @@ -63,10 +54,8 @@ static struct at91_uart_config __initdata kb9202_uart_config = { static void __init kb9202_map_io(void) { - at91rm9200_map_io(); - - /* Initialize clocks: 10 MHz crystal */ - at91_clock_init(10000000); + /* Initialize processor: 10 MHz crystal */ + at91rm9200_initialize(10000000, AT91RM9200_PQFP); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); @@ -75,6 +64,11 @@ static void __init kb9202_map_io(void) at91_init_serial(&kb9202_uart_config); } +static void __init kb9202_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + static struct at91_eth_data __initdata kb9202_eth_data = { .phy_irq_pin = AT91_PIN_PB29, .is_rmii = 0, @@ -95,6 +89,29 @@ static struct at91_mmc_data __initdata kb9202_mmc_data = { .wire4 = 1, }; +static struct mtd_partition __initdata kb9202_nand_partition[] = { + { + .name = "nand_fs", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition *nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(kb9202_nand_partition); + return kb9202_nand_partition; +} + +static struct at91_nand_data __initdata kb9202_nand_data = { + .ale = 22, + .cle = 21, + // .det_pin = ... not there + .rdy_pin = AT91_PIN_PC29, + .enable_pin = AT91_PIN_PC28, + .partition_info = nand_partitions, +}; + static void __init kb9202_board_init(void) { /* Serial */ @@ -111,6 +128,8 @@ static void __init kb9202_board_init(void) at91_add_device_i2c(); /* SPI */ at91_add_device_spi(NULL, 0); + /* NAND */ + at91_add_device_nand(&kb9202_nand_data); } MACHINE_START(KB9200, "KB920x") diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c index edc2cc837ae6..a43b061a7c85 100644 --- a/arch/arm/mach-at91rm9200/clock.c +++ b/arch/arm/mach-at91rm9200/clock.c @@ -29,7 +29,7 @@ #include <asm/hardware.h> -#include "generic.h" +#include "clock.h" /* @@ -38,23 +38,15 @@ * PLLB be used at other rates (on boards that don't need USB), etc. */ -struct clk { - const char *name; /* unique clock name */ - const char *function; /* function of the clock */ - struct device *dev; /* device associated with function */ - unsigned long rate_hz; - struct clk *parent; - u32 pmc_mask; - void (*mode)(struct clk *, int); - unsigned id:2; /* PCK0..3, or 32k/main/a/b */ - unsigned primary:1; - unsigned pll:1; - unsigned programmable:1; - u16 users; -}; +#define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY) +#define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE) +#define clk_is_peripheral(x) ((x)->type & CLK_TYPE_PERIPHERAL) + + +static LIST_HEAD(clocks); +static DEFINE_SPINLOCK(clk_lock); -static spinlock_t clk_lock; -static u32 at91_pllb_usb_init; +static u32 at91_pllb_usb_init; /* * Four primary clock sources: two crystal oscillators (32K, main), and @@ -67,21 +59,20 @@ static struct clk clk32k = { .rate_hz = AT91_SLOW_CLOCK, .users = 1, /* always on */ .id = 0, - .primary = 1, + .type = CLK_TYPE_PRIMARY, }; static struct clk main_clk = { .name = "main", .pmc_mask = AT91_PMC_MOSCS, /* in PMC_SR */ .id = 1, - .primary = 1, + .type = CLK_TYPE_PRIMARY, }; static struct clk plla = { .name = "plla", .parent = &main_clk, .pmc_mask = AT91_PMC_LOCKA, /* in PMC_SR */ .id = 2, - .primary = 1, - .pll = 1, + .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL, }; static void pllb_mode(struct clk *clk, int is_on) @@ -94,6 +85,7 @@ static void pllb_mode(struct clk *clk, int is_on) } else value = 0; + // REVISIT: Add work-around for AT91RM9200 Errata #26 ? at91_sys_write(AT91_CKGR_PLLBR, value); do { @@ -107,8 +99,7 @@ static struct clk pllb = { .pmc_mask = AT91_PMC_LOCKB, /* in PMC_SR */ .mode = pllb_mode, .id = 3, - .primary = 1, - .pll = 1, + .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL, }; static void pmc_sys_mode(struct clk *clk, int is_on) @@ -133,41 +124,6 @@ static struct clk uhpck = { .mode = pmc_sys_mode, }; -#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS -/* - * The four programmable clocks can be parented by any primary clock. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .mode = pmc_sys_mode, - .programmable = 1, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .mode = pmc_sys_mode, - .programmable = 1, - .id = 1, -}; -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .mode = pmc_sys_mode, - .programmable = 1, - .id = 2, -}; -static struct clk pck3 = { - .name = "pck3", - .pmc_mask = AT91_PMC_PCK3, - .mode = pmc_sys_mode, - .programmable = 1, - .id = 3, -}; -#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ - /* * The master clock is divided from the CPU clock (by 1-4). It's used for @@ -187,131 +143,21 @@ static void pmc_periph_mode(struct clk *clk, int is_on) at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask); } -static struct clk udc_clk = { - .name = "udc_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_UDP, - .mode = pmc_periph_mode, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_UHP, - .mode = pmc_periph_mode, -}; -static struct clk ether_clk = { - .name = "ether_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_EMAC, - .mode = pmc_periph_mode, -}; -static struct clk mmc_clk = { - .name = "mci_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_MCI, - .mode = pmc_periph_mode, -}; -static struct clk twi_clk = { - .name = "twi_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_TWI, - .mode = pmc_periph_mode, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_US0, - .mode = pmc_periph_mode, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_US1, - .mode = pmc_periph_mode, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_US2, - .mode = pmc_periph_mode, -}; -static struct clk usart3_clk = { - .name = "usart3_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_US3, - .mode = pmc_periph_mode, -}; -static struct clk spi_clk = { - .name = "spi0_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_SPI, - .mode = pmc_periph_mode, -}; -static struct clk pioA_clk = { - .name = "pioA_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_PIOA, - .mode = pmc_periph_mode, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_PIOB, - .mode = pmc_periph_mode, -}; -static struct clk pioC_clk = { - .name = "pioC_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_PIOC, - .mode = pmc_periph_mode, -}; -static struct clk pioD_clk = { - .name = "pioD_clk", - .parent = &mck, - .pmc_mask = 1 << AT91_ID_PIOD, - .mode = pmc_periph_mode, -}; - -static struct clk *const clock_list[] = { - /* four primary clocks -- MUST BE FIRST! */ - &clk32k, - &main_clk, - &plla, - &pllb, - - /* PLLB children (USB) */ - &udpck, - &uhpck, - -#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS - /* programmable clocks */ - &pck0, - &pck1, - &pck2, - &pck3, -#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ - - /* MCK and peripherals */ - &mck, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &usart3_clk, - &mmc_clk, - &udc_clk, - &twi_clk, - &spi_clk, - &pioA_clk, - &pioB_clk, - &pioC_clk, - &pioD_clk, - // ssc0..ssc2 - // tc0..tc5 - // irq0..irq6 - &ohci_clk, - ðer_clk, -}; +static struct clk __init *at91_css_to_clk(unsigned long css) +{ + switch (css) { + case AT91_PMC_CSS_SLOW: + return &clk32k; + case AT91_PMC_CSS_MAIN: + return &main_clk; + case AT91_PMC_CSS_PLLA: + return &plla; + case AT91_PMC_CSS_PLLB: + return &pllb; + } + return NULL; +} /* * Associate a particular clock with a function (eg, "uart") and device. @@ -329,14 +175,12 @@ void __init at91_clock_associate(const char *id, struct device *dev, const char clk->dev = dev; } -/* clocks are all static for now; no refcounting necessary */ +/* clocks cannot be de-registered no refcounting necessary */ struct clk *clk_get(struct device *dev, const char *id) { - int i; - - for (i = 0; i < ARRAY_SIZE(clock_list); i++) { - struct clk *clk = clock_list[i]; + struct clk *clk; + list_for_each_entry(clk, &clocks, node) { if (strcmp(id, clk->name) == 0) return clk; if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0) @@ -424,7 +268,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate) unsigned prescale; unsigned long actual; - if (!clk->programmable) + if (!clk_is_programmable(clk)) return -EINVAL; spin_lock_irqsave(&clk_lock, flags); @@ -446,7 +290,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) unsigned prescale; unsigned long actual; - if (!clk->programmable) + if (!clk_is_programmable(clk)) return -EINVAL; if (clk->users) return -EBUSY; @@ -484,7 +328,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent) if (clk->users) return -EBUSY; - if (!parent->primary || !clk->programmable) + if (!clk_is_primary(parent) || !clk_is_programmable(clk)) return -EINVAL; spin_lock_irqsave(&clk_lock, flags); @@ -497,6 +341,18 @@ int clk_set_parent(struct clk *clk, struct clk *parent) } EXPORT_SYMBOL(clk_set_parent); +/* establish PCK0..PCK3 parentage and rate */ +static void init_programmable_clock(struct clk *clk) +{ + struct clk *parent; + u32 pckr; + + pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); + parent = at91_css_to_clk(pckr & AT91_PMC_CSS); + clk->parent = parent; + clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3)); +} + #endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ /*------------------------------------------------------------------------*/ @@ -506,6 +362,7 @@ EXPORT_SYMBOL(clk_set_parent); static int at91_clk_show(struct seq_file *s, void *unused) { u32 scsr, pcsr, sr; + struct clk *clk; unsigned i; seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR)); @@ -523,9 +380,8 @@ static int at91_clk_show(struct seq_file *s, void *unused) seq_printf(s, "\n"); - for (i = 0; i < ARRAY_SIZE(clock_list); i++) { - char *state; - struct clk *clk = clock_list[i]; + list_for_each_entry(clk, &clocks, node) { + char *state; if (clk->mode == pmc_sys_mode) state = (scsr & clk->pmc_mask) ? "on" : "off"; @@ -570,6 +426,28 @@ postcore_initcall(at91_clk_debugfs_init); /*------------------------------------------------------------------------*/ +/* Register a new clock */ +int __init clk_register(struct clk *clk) +{ + if (clk_is_peripheral(clk)) { + clk->parent = &mck; + clk->mode = pmc_periph_mode; + list_add_tail(&clk->node, &clocks); + } +#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS + else if (clk_is_programmable(clk)) { + clk->mode = pmc_sys_mode; + init_programmable_clock(clk); + list_add_tail(&clk->node, &clocks); + } +#endif + + return 0; +} + + +/*------------------------------------------------------------------------*/ + static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg) { unsigned mul, div; @@ -640,20 +518,17 @@ fail: return 0; } - /* * Several unused clocks may be active. Turn them off. */ -static void at91_periphclk_reset(void) +static void __init at91_periphclk_reset(void) { unsigned long reg; - int i; + struct clk *clk; reg = at91_sys_read(AT91_PMC_PCSR); - for (i = 0; i < ARRAY_SIZE(clock_list); i++) { - struct clk *clk = clock_list[i]; - + list_for_each_entry(clk, &clocks, node) { if (clk->mode != pmc_periph_mode) continue; @@ -664,11 +539,25 @@ static void at91_periphclk_reset(void) at91_sys_write(AT91_PMC_PCDR, reg); } +static struct clk *const standard_pmc_clocks[] __initdata = { + /* four primary clocks */ + &clk32k, + &main_clk, + &plla, + &pllb, + + /* PLLB children (USB) */ + &udpck, + &uhpck, + + /* MCK */ + &mck +}; + int __init at91_clock_init(unsigned long main_clock) { unsigned tmp, freq, mckr; - - spin_lock_init(&clk_lock); + int i; /* * When the bootloader initialized the main oscillator correctly, @@ -709,11 +598,15 @@ int __init at91_clock_init(unsigned long main_clock) * For now, assume this parentage won't change. */ mckr = at91_sys_read(AT91_PMC_MCKR); - mck.parent = clock_list[mckr & AT91_PMC_CSS]; + mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS); freq = mck.parent->rate_hz; freq /= (1 << ((mckr >> 2) & 3)); /* prescale */ mck.rate_hz = freq / (1 + ((mckr >> 8) & 3)); /* mdiv */ + /* Register the PMC's standard clocks */ + for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) + list_add_tail(&standard_pmc_clocks[i]->node, &clocks); + /* MCK and CPU clock are "always on" */ clk_enable(&mck); @@ -722,35 +615,8 @@ int __init at91_clock_init(unsigned long main_clock) (unsigned) main_clock / 1000000, ((unsigned) main_clock % 1000000) / 1000); -#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS - /* establish PCK0..PCK3 parentage */ - for (tmp = 0; tmp < ARRAY_SIZE(clock_list); tmp++) { - struct clk *clk = clock_list[tmp], *parent; - u32 pckr; - - if (!clk->programmable) - continue; - - pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); - parent = clock_list[pckr & AT91_PMC_CSS]; - clk->parent = parent; - clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3)); - - if (clk->users == 0) { - /* not being used, so switch it off */ - at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask); - } - } -#else /* disable all programmable clocks */ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3); -#endif - - /* enable the PIO clocks */ - clk_enable(&pioA_clk); - clk_enable(&pioB_clk); - clk_enable(&pioC_clk); - clk_enable(&pioD_clk); /* disable all other unused peripheral clocks */ at91_periphclk_reset(); diff --git a/arch/arm/mach-at91rm9200/clock.h b/arch/arm/mach-at91rm9200/clock.h new file mode 100644 index 000000000000..0592e662ab37 --- /dev/null +++ b/arch/arm/mach-at91rm9200/clock.h @@ -0,0 +1,30 @@ +/* + * linux/arch/arm/mach-at91rm9200/clock.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define CLK_TYPE_PRIMARY 0x1 +#define CLK_TYPE_PLL 0x2 +#define CLK_TYPE_PROGRAMMABLE 0x4 +#define CLK_TYPE_PERIPHERAL 0x8 + + +struct clk { + struct list_head node; + const char *name; /* unique clock name */ + const char *function; /* function of the clock */ + struct device *dev; /* device associated with function */ + unsigned long rate_hz; + struct clk *parent; + u32 pmc_mask; + void (*mode)(struct clk *, int); + unsigned id:2; /* PCK0..3, or 32k/main/a/b */ + unsigned type; /* clock type */ + u16 users; +}; + + +extern int __init clk_register(struct clk *clk); diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c index 4352acb88178..01525530c287 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/devices.c @@ -35,13 +35,13 @@ static struct at91_usbh_data usbh_data; static struct resource at91_usbh_resources[] = { [0] = { - .start = AT91_UHP_BASE, - .end = AT91_UHP_BASE + SZ_1M - 1, + .start = AT91RM9200_UHP_BASE, + .end = AT91RM9200_UHP_BASE + SZ_1M - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_UHP, - .end = AT91_ID_UHP, + .start = AT91RM9200_ID_UHP, + .end = AT91RM9200_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -80,13 +80,13 @@ static struct at91_udc_data udc_data; static struct resource at91_udc_resources[] = { [0] = { - .start = AT91_BASE_UDP, - .end = AT91_BASE_UDP + SZ_16K - 1, + .start = AT91RM9200_BASE_UDP, + .end = AT91RM9200_BASE_UDP + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_UDP, - .end = AT91_ID_UDP, + .start = AT91RM9200_ID_UDP, + .end = AT91RM9200_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -131,13 +131,13 @@ static struct at91_eth_data eth_data; static struct resource at91_eth_resources[] = { [0] = { - .start = AT91_BASE_EMAC, - .end = AT91_BASE_EMAC + SZ_16K - 1, + .start = AT91_VA_BASE_EMAC, + .end = AT91_VA_BASE_EMAC + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_EMAC, - .end = AT91_ID_EMAC, + .start = AT91RM9200_ID_EMAC, + .end = AT91RM9200_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -263,13 +263,13 @@ static struct at91_mmc_data mmc_data; static struct resource at91_mmc_resources[] = { [0] = { - .start = AT91_BASE_MCI, - .end = AT91_BASE_MCI + SZ_16K - 1, + .start = AT91RM9200_BASE_MCI, + .end = AT91RM9200_BASE_MCI + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_MCI, - .end = AT91_ID_MCI, + .start = AT91RM9200_ID_MCI, + .end = AT91RM9200_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -423,13 +423,13 @@ static u64 spi_dmamask = 0xffffffffUL; static struct resource at91_spi_resources[] = { [0] = { - .start = AT91_BASE_SPI, - .end = AT91_BASE_SPI + SZ_16K - 1, + .start = AT91RM9200_BASE_SPI, + .end = AT91RM9200_BASE_SPI + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SPI, - .end = AT91_ID_SPI, + .start = AT91RM9200_ID_SPI, + .end = AT91RM9200_ID_SPI, .flags = IORESOURCE_IRQ, }, }; @@ -582,13 +582,13 @@ static inline void configure_dbgu_pins(void) static struct resource uart0_resources[] = { [0] = { - .start = AT91_BASE_US0, - .end = AT91_BASE_US0 + SZ_16K - 1, + .start = AT91RM9200_BASE_US0, + .end = AT91RM9200_BASE_US0 + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_US0, - .end = AT91_ID_US0, + .start = AT91RM9200_ID_US0, + .end = AT91RM9200_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -624,13 +624,13 @@ static inline void configure_usart0_pins(void) static struct resource uart1_resources[] = { [0] = { - .start = AT91_BASE_US1, - .end = AT91_BASE_US1 + SZ_16K - 1, + .start = AT91RM9200_BASE_US1, + .end = AT91RM9200_BASE_US1 + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_US1, - .end = AT91_ID_US1, + .start = AT91RM9200_ID_US1, + .end = AT91RM9200_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -665,13 +665,13 @@ static inline void configure_usart1_pins(void) static struct resource uart2_resources[] = { [0] = { - .start = AT91_BASE_US2, - .end = AT91_BASE_US2 + SZ_16K - 1, + .start = AT91RM9200_BASE_US2, + .end = AT91RM9200_BASE_US2 + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_US2, - .end = AT91_ID_US2, + .start = AT91RM9200_ID_US2, + .end = AT91RM9200_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -700,13 +700,13 @@ static inline void configure_usart2_pins(void) static struct resource uart3_resources[] = { [0] = { - .start = AT91_BASE_US3, - .end = AT91_BASE_US3 + SZ_16K - 1, + .start = AT91RM9200_BASE_US3, + .end = AT91RM9200_BASE_US3 + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_US3, - .end = AT91_ID_US3, + .start = AT91RM9200_ID_US3, + .end = AT91RM9200_ID_US3, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91rm9200/generic.h b/arch/arm/mach-at91rm9200/generic.h index 7979d8ab7e07..694e411e285f 100644 --- a/arch/arm/mach-at91rm9200/generic.h +++ b/arch/arm/mach-at91rm9200/generic.h @@ -8,18 +8,17 @@ * published by the Free Software Foundation. */ + /* Processors */ +extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks); + /* Interrupts */ -extern void __init at91rm9200_init_irq(unsigned int priority[]); +extern void __init at91rm9200_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); -extern void __init at91_gpio_irq_setup(unsigned banks); /* Timer */ struct sys_timer; extern struct sys_timer at91rm9200_timer; - /* Memory Map */ -extern void __init at91rm9200_map_io(void); - /* Clocks */ extern int __init at91_clock_init(unsigned long main_clock); struct device; @@ -29,3 +28,14 @@ extern void __init at91_clock_associate(const char *id, struct device *dev, cons extern void at91_irq_suspend(void); extern void at91_irq_resume(void); + /* GPIO */ +#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */ +#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */ + +struct at91_gpio_bank { + unsigned short id; /* peripheral ID */ + unsigned long offset; /* offset from system peripheral base */ + struct clk *clock; /* associated clock */ +}; +extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks); +extern void __init at91_gpio_irq_setup(void); diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c index cec199fd6721..58c9bf5e9520 100644 --- a/arch/arm/mach-at91rm9200/gpio.c +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -9,6 +9,7 @@ * (at your option) any later version. */ +#include <linux/clk.h> #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -20,12 +21,12 @@ #include <asm/hardware.h> #include <asm/arch/gpio.h> -static const u32 pio_controller_offset[4] = { - AT91_PIOA, - AT91_PIOB, - AT91_PIOC, - AT91_PIOD, -}; +#include "generic.h" + + +static struct at91_gpio_bank *gpio; +static int gpio_banks; + static inline void __iomem *pin_to_controller(unsigned pin) { @@ -33,8 +34,8 @@ static inline void __iomem *pin_to_controller(unsigned pin) pin -= PIN_BASE; pin /= 32; - if (likely(pin < BGA_GPIO_BANKS)) - return sys_base + pio_controller_offset[pin]; + if (likely(pin < gpio_banks)) + return sys_base + gpio[pin].offset; return NULL; } @@ -179,7 +180,6 @@ EXPORT_SYMBOL(at91_set_multi_drive); /*--------------------------------------------------------------------------*/ - /* * assuming the pin is muxed as a gpio output, set its value. */ @@ -216,8 +216,8 @@ EXPORT_SYMBOL(at91_get_gpio_value); #ifdef CONFIG_PM -static u32 wakeups[BGA_GPIO_BANKS]; -static u32 backups[BGA_GPIO_BANKS]; +static u32 wakeups[MAX_GPIO_BANKS]; +static u32 backups[MAX_GPIO_BANKS]; static int gpio_irq_set_wake(unsigned pin, unsigned state) { @@ -226,7 +226,7 @@ static int gpio_irq_set_wake(unsigned pin, unsigned state) pin -= PIN_BASE; pin /= 32; - if (unlikely(pin >= BGA_GPIO_BANKS)) + if (unlikely(pin >= MAX_GPIO_BANKS)) return -EINVAL; if (state) @@ -241,8 +241,8 @@ void at91_gpio_suspend(void) { int i; - for (i = 0; i < BGA_GPIO_BANKS; i++) { - u32 pio = pio_controller_offset[i]; + for (i = 0; i < gpio_banks; i++) { + u32 pio = gpio[i].offset; /* * Note: drivers should have disabled GPIO interrupts that @@ -257,14 +257,14 @@ void at91_gpio_suspend(void) * first place! */ backups[i] = at91_sys_read(pio + PIO_IMR); - at91_sys_write(pio_controller_offset[i] + PIO_IDR, backups[i]); - at91_sys_write(pio_controller_offset[i] + PIO_IER, wakeups[i]); + at91_sys_write(pio + PIO_IDR, backups[i]); + at91_sys_write(pio + PIO_IER, wakeups[i]); if (!wakeups[i]) { - disable_irq_wake(AT91_ID_PIOA + i); - at91_sys_write(AT91_PMC_PCDR, 1 << (AT91_ID_PIOA + i)); + disable_irq_wake(gpio[i].id); + at91_sys_write(AT91_PMC_PCDR, 1 << gpio[i].id); } else { - enable_irq_wake(AT91_ID_PIOA + i); + enable_irq_wake(gpio[i].id); #ifdef CONFIG_PM_DEBUG printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", "ABCD"[i], wakeups[i]); #endif @@ -276,16 +276,13 @@ void at91_gpio_resume(void) { int i; - for (i = 0; i < BGA_GPIO_BANKS; i++) { - at91_sys_write(pio_controller_offset[i] + PIO_IDR, wakeups[i]); - at91_sys_write(pio_controller_offset[i] + PIO_IER, backups[i]); - } + for (i = 0; i < gpio_banks; i++) { + u32 pio = gpio[i].offset; - at91_sys_write(AT91_PMC_PCER, - (1 << AT91_ID_PIOA) - | (1 << AT91_ID_PIOB) - | (1 << AT91_ID_PIOC) - | (1 << AT91_ID_PIOD)); + at91_sys_write(pio + PIO_IDR, wakeups[i]); + at91_sys_write(pio + PIO_IER, backups[i]); + at91_sys_write(AT91_PMC_PCER, 1 << gpio[i].id); + } } #else @@ -377,20 +374,25 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs /* now it may re-trigger */ } -/* call this from board-specific init_irq */ -void __init at91_gpio_irq_setup(unsigned banks) +/*--------------------------------------------------------------------------*/ + +/* + * Called from the processor-specific init to enable GPIO interrupt support. + */ +void __init at91_gpio_irq_setup(void) { - unsigned pioc, pin, id; + unsigned pioc, pin; - if (banks > 4) - banks = 4; - for (pioc = 0, pin = PIN_BASE, id = AT91_ID_PIOA; - pioc < banks; - pioc++, id++) { + for (pioc = 0, pin = PIN_BASE; + pioc < gpio_banks; + pioc++) { void __iomem *controller; + unsigned id = gpio[pioc].id; unsigned i; - controller = (void __iomem *) AT91_VA_BASE_SYS + pio_controller_offset[pioc]; + clk_enable(gpio[pioc].clock); /* enable PIO controller's clock */ + + controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset; __raw_writel(~0, controller + PIO_IDR); set_irq_data(id, (void *) pin); @@ -408,5 +410,16 @@ void __init at91_gpio_irq_setup(unsigned banks) set_irq_chained_handler(id, gpio_irq_handler); } - pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, banks); + pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks); +} + +/* + * Called from the processor-specific init to enable GPIO pin support. + */ +void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks) +{ + BUG_ON(nr_banks > MAX_GPIO_BANKS); + + gpio = data; + gpio_banks = nr_banks; } diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c index c3a5e777f9f8..3e488117ca91 100644 --- a/arch/arm/mach-at91rm9200/irq.c +++ b/arch/arm/mach-at91rm9200/irq.c @@ -34,8 +34,6 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> -#include "generic.h" - static void at91_aic_mask_irq(unsigned int irq) { @@ -61,12 +59,12 @@ static int at91_aic_set_type(unsigned irq, unsigned type) srctype = AT91_AIC_SRCTYPE_RISING; break; case IRQT_LOW: - if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0)) /* only supported on external interrupts */ + if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0)) /* only supported on external interrupts */ return -EINVAL; srctype = AT91_AIC_SRCTYPE_LOW; break; case IRQT_FALLING: - if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0)) /* only supported on external interrupts */ + if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0)) /* only supported on external interrupts */ return -EINVAL; srctype = AT91_AIC_SRCTYPE_FALLING; break; diff --git a/arch/arm/mach-at91rm9200/pm.c b/arch/arm/mach-at91rm9200/pm.c index 47e5480feb7e..32c95d8eaacf 100644 --- a/arch/arm/mach-at91rm9200/pm.c +++ b/arch/arm/mach-at91rm9200/pm.c @@ -123,13 +123,13 @@ static int at91_pm_enter(suspend_state_t state) (at91_sys_read(AT91_PMC_PCSR) | (1 << AT91_ID_FIQ) | (1 << AT91_ID_SYS) - | (1 << AT91_ID_IRQ0) - | (1 << AT91_ID_IRQ1) - | (1 << AT91_ID_IRQ2) - | (1 << AT91_ID_IRQ3) - | (1 << AT91_ID_IRQ4) - | (1 << AT91_ID_IRQ5) - | (1 << AT91_ID_IRQ6)) + | (1 << AT91RM9200_ID_IRQ0) + | (1 << AT91RM9200_ID_IRQ1) + | (1 << AT91RM9200_ID_IRQ2) + | (1 << AT91RM9200_ID_IRQ3) + | (1 << AT91RM9200_ID_IRQ4) + | (1 << AT91RM9200_ID_IRQ5) + | (1 << AT91RM9200_ID_IRQ6)) & at91_sys_read(AT91_AIC_IMR), state); diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index f1b740083aee..e346b03cd921 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -15,6 +15,12 @@ config MACH_EDB9302 Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9302 Evaluation Board. +config MACH_EDB9312 + bool "Support Cirrus Logic EDB9312" + help + Say 'Y' here if you want your kernel to support the Cirrus + Logic EDB9312 Evaluation Board. + config MACH_EDB9315 bool "Support Cirrus Logic EDB9315" help diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 1f5a6b0487ee..c2eb18b530c2 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -7,6 +7,7 @@ obj-n := obj- := obj-$(CONFIG_MACH_EDB9302) += edb9302.o +obj-$(CONFIG_MACH_EDB9312) += edb9312.o obj-$(CONFIG_MACH_EDB9315) += edb9315.o obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c new file mode 100644 index 000000000000..9e399211108c --- /dev/null +++ b/arch/arm/mach-ep93xx/edb9312.c @@ -0,0 +1,63 @@ +/* + * arch/arm/mach-ep93xx/edb9312.c + * Cirrus Logic EDB9312 support. + * + * Copyright (C) 2006 Infosys Technologies Limited + * Toufeeq Hussain <toufeeq_hussain@infosys.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <asm/io.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static struct physmap_flash_data edb9312_flash_data = { + .width = 4, +}; + +static struct resource edb9312_flash_resource = { + .start = 0x60000000, + .end = 0x61ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device edb9312_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &edb9312_flash_data, + }, + .num_resources = 1, + .resource = &edb9312_flash_resource, +}; + +static void __init edb9312_init_machine(void) +{ + ep93xx_init_devices(); + platform_device_register(&edb9312_flash); +} + +MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") + /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb9312_init_machine, +MACHINE_END diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 823e25d4547e..a1ae49df5c3b 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -69,16 +69,16 @@ dc21285_read_config(struct pci_bus *bus, unsigned int devfn, int where, if (addr) switch (size) { case 1: - asm("ldr%?b %0, [%1, %2]" - : "=r" (v) : "r" (addr), "r" (where)); + asm("ldrb %0, [%1, %2]" + : "=r" (v) : "r" (addr), "r" (where) : "cc"); break; case 2: - asm("ldr%?h %0, [%1, %2]" - : "=r" (v) : "r" (addr), "r" (where)); + asm("ldrh %0, [%1, %2]" + : "=r" (v) : "r" (addr), "r" (where) : "cc"); break; case 4: - asm("ldr%? %0, [%1, %2]" - : "=r" (v) : "r" (addr), "r" (where)); + asm("ldr %0, [%1, %2]" + : "=r" (v) : "r" (addr), "r" (where) : "cc"); break; } @@ -103,16 +103,19 @@ dc21285_write_config(struct pci_bus *bus, unsigned int devfn, int where, if (addr) switch (size) { case 1: - asm("str%?b %0, [%1, %2]" - : : "r" (value), "r" (addr), "r" (where)); + asm("strb %0, [%1, %2]" + : : "r" (value), "r" (addr), "r" (where) + : "cc"); break; case 2: - asm("str%?h %0, [%1, %2]" - : : "r" (value), "r" (addr), "r" (where)); + asm("strh %0, [%1, %2]" + : : "r" (value), "r" (addr), "r" (where) + : "cc"); break; case 4: - asm("str%? %0, [%1, %2]" - : : "r" (value), "r" (addr), "r" (where)); + asm("str %0, [%1, %2]" + : : "r" (value), "r" (addr), "r" (where) + : "cc"); break; } diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig new file mode 100644 index 000000000000..c072d94070da --- /dev/null +++ b/arch/arm/mach-iop32x/Kconfig @@ -0,0 +1,35 @@ +if ARCH_IOP32X + +menu "IOP32x Implementation Options" + +comment "IOP32x Platform Types" + +config MACH_GLANTANK + bool "Enable support for the IO-Data GLAN Tank" + help + Say Y here if you want to run your kernel on the GLAN Tank + NAS appliance or machines from IO-Data's HDL-Gxxx, HDL-GWxxx + and HDL-GZxxx series. + +config ARCH_IQ80321 + bool "Enable support for IQ80321" + help + Say Y here if you want to run your kernel on the Intel IQ80321 + evaluation kit for the IOP321 processor. + +config ARCH_IQ31244 + bool "Enable support for EP80219/IQ31244" + help + Say Y here if you want to run your kernel on the Intel EP80219 + evaluation kit for the Intel 80219 processor (a IOP321 variant) + or the IQ31244 evaluation kit for the IOP321 processor. + +config MACH_N2100 + bool "Enable support for the Thecus n2100" + help + Say Y here if you want to run your kernel on the Thecus n2100 + NAS appliance. + +endmenu + +endif diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile new file mode 100644 index 000000000000..7b05b37e1f94 --- /dev/null +++ b/arch/arm/mach-iop32x/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for the linux kernel. +# + +obj-y := irq.o +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_MACH_GLANTANK) += glantank.o +obj-$(CONFIG_ARCH_IQ80321) += iq80321.o +obj-$(CONFIG_ARCH_IQ31244) += iq31244.o +obj-$(CONFIG_MACH_N2100) += n2100.o diff --git a/arch/arm/mach-iop32x/Makefile.boot b/arch/arm/mach-iop32x/Makefile.boot new file mode 100644 index 000000000000..47000dccd61f --- /dev/null +++ b/arch/arm/mach-iop32x/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0xa0008000 +params_phys-y := 0xa0000100 +initrd_phys-y := 0xa0800000 diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c new file mode 100644 index 000000000000..b9b765057dbe --- /dev/null +++ b/arch/arm/mach-iop32x/glantank.c @@ -0,0 +1,195 @@ +/* + * arch/arm/mach-iop32x/glantank.c + * + * Board support code for the GLAN Tank. + * + * Copyright (C) 2006 Martin Michlmayr <tbm@cyrius.com> + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/pci.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> +#include <asm/page.h> + +/* + * GLAN Tank timer tick configuration. + */ +static void __init glantank_timer_init(void) +{ + /* 33.333 MHz crystal. */ + iop3xx_init_time(200000000); +} + +static struct sys_timer glantank_timer = { + .init = glantank_timer_init, + .offset = iop3xx_gettimeoffset, +}; + + +/* + * GLAN Tank I/O. + */ +static struct map_desc glantank_io_desc[] __initdata = { + { /* on-board devices */ + .virtual = GLANTANK_UART, + .pfn = __phys_to_pfn(GLANTANK_UART), + .length = 0x00100000, + .type = MT_DEVICE + }, +}; + +void __init glantank_map_io(void) +{ + iop3xx_map_io(); + iotable_init(glantank_io_desc, ARRAY_SIZE(glantank_io_desc)); +} + + +/* + * GLAN Tank PCI. + */ +#define INTA IRQ_IOP32X_XINT0 +#define INTB IRQ_IOP32X_XINT1 +#define INTC IRQ_IOP32X_XINT2 +#define INTD IRQ_IOP32X_XINT3 + +static inline int __init +glantank_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[][4] = { + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + {INTD, INTD, INTD, INTD}, /* UART (8250) */ + {INTA, INTA, INTA, INTA}, /* Ethernet (E1000) */ + {INTB, INTB, INTB, INTB}, /* IDE (AEC6280R) */ + {INTC, INTC, INTC, INTC}, /* USB (NEC) */ + }; + + BUG_ON(pin < 1 || pin > 4); + + return pci_irq_table[slot % 4][pin - 1]; +} + +static struct hw_pci glantank_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .scan = iop3xx_pci_scan_bus, + .map_irq = glantank_pci_map_irq, +}; + +static int __init glantank_pci_init(void) +{ + if (machine_is_glantank()) + pci_common_init(&glantank_pci); + + return 0; +} + +subsys_initcall(glantank_pci_init); + + +/* + * GLAN Tank machine initialization. + */ +static struct physmap_flash_data glantank_flash_data = { + .width = 1, +}; + +static struct resource glantank_flash_resource = { + .start = 0xf0000000, + .end = 0xf007ffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device glantank_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &glantank_flash_data, + }, + .num_resources = 1, + .resource = &glantank_flash_resource, +}; + +static struct plat_serial8250_port glantank_serial_port[] = { + { + .mapbase = GLANTANK_UART, + .membase = (char *)GLANTANK_UART, + .irq = IRQ_IOP32X_XINT3, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = 1843200, + }, + { }, +}; + +static struct resource glantank_uart_resource = { + .start = GLANTANK_UART, + .end = GLANTANK_UART + 7, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device glantank_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = glantank_serial_port, + }, + .num_resources = 1, + .resource = &glantank_uart_resource, +}; + +static void glantank_power_off(void) +{ + __raw_writeb(0x01, 0xfe8d0004); + + while (1) + ; +} + +static void __init glantank_init_machine(void) +{ + platform_device_register(&iop3xx_i2c0_device); + platform_device_register(&iop3xx_i2c1_device); + platform_device_register(&glantank_flash_device); + platform_device_register(&glantank_serial_device); + + pm_power_off = glantank_power_off; +} + +MACHINE_START(GLANTANK, "GLAN Tank") + /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ + .phys_io = GLANTANK_UART, + .io_pg_offst = ((GLANTANK_UART) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = glantank_map_io, + .init_irq = iop32x_init_irq, + .timer = &glantank_timer, + .init_machine = glantank_init_machine, +MACHINE_END diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c new file mode 100644 index 000000000000..be4aedfa0de6 --- /dev/null +++ b/arch/arm/mach-iop32x/iq31244.c @@ -0,0 +1,293 @@ +/* + * arch/arm/mach-iop32x/iq31244.c + * + * Board support code for the Intel EP80219 and IQ31244 platforms. + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * Copyright 2003 (c) MontaVista, Software, Inc. + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/pm.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/pci.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> +#include <asm/page.h> +#include <asm/pgtable.h> + + +/* + * The EP80219 and IQ31244 use the same machine ID. To find out + * which of the two we're running on, we look at the processor ID. + */ +static int is_80219(void) +{ + extern int processor_id; + return !!((processor_id & 0xffffffe0) == 0x69052e20); +} + + +/* + * EP80219/IQ31244 timer tick configuration. + */ +static void __init iq31244_timer_init(void) +{ + if (is_80219()) { + /* 33.333 MHz crystal. */ + iop3xx_init_time(200000000); + } else { + /* 33.000 MHz crystal. */ + iop3xx_init_time(198000000); + } +} + +static struct sys_timer iq31244_timer = { + .init = iq31244_timer_init, + .offset = iop3xx_gettimeoffset, +}; + + +/* + * IQ31244 I/O. + */ +static struct map_desc iq31244_io_desc[] __initdata = { + { /* on-board devices */ + .virtual = IQ31244_UART, + .pfn = __phys_to_pfn(IQ31244_UART), + .length = 0x00100000, + .type = MT_DEVICE, + }, +}; + +void __init iq31244_map_io(void) +{ + iop3xx_map_io(); + iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc)); +} + + +/* + * EP80219/IQ31244 PCI. + */ +static inline int __init +ep80219_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + if (slot == 0) { + /* CFlash */ + irq = IRQ_IOP32X_XINT1; + } else if (slot == 1) { + /* 82551 Pro 100 */ + irq = IRQ_IOP32X_XINT0; + } else if (slot == 2) { + /* PCI-X Slot */ + irq = IRQ_IOP32X_XINT3; + } else if (slot == 3) { + /* SATA */ + irq = IRQ_IOP32X_XINT2; + } else { + printk(KERN_ERR "ep80219_pci_map_irq() called for unknown " + "device PCI:%d:%d:%d\n", dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + irq = -1; + } + + return irq; +} + +static struct hw_pci ep80219_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .scan = iop3xx_pci_scan_bus, + .map_irq = ep80219_pci_map_irq, +}; + +static inline int __init +iq31244_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + if (slot == 0) { + /* CFlash */ + irq = IRQ_IOP32X_XINT1; + } else if (slot == 1) { + /* SATA */ + irq = IRQ_IOP32X_XINT2; + } else if (slot == 2) { + /* PCI-X Slot */ + irq = IRQ_IOP32X_XINT3; + } else if (slot == 3) { + /* 82546 GigE */ + irq = IRQ_IOP32X_XINT0; + } else { + printk(KERN_ERR "iq31244_pci_map_irq called for unknown " + "device PCI:%d:%d:%d\n", dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + irq = -1; + } + + return irq; +} + +static struct hw_pci iq31244_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .scan = iop3xx_pci_scan_bus, + .map_irq = iq31244_pci_map_irq, +}; + +static int __init iq31244_pci_init(void) +{ + if (machine_is_iq31244()) { + if (is_80219()) { + pci_common_init(&ep80219_pci); + } else { + pci_common_init(&iq31244_pci); + } + } + + return 0; +} + +subsys_initcall(iq31244_pci_init); + + +/* + * IQ31244 machine initialisation. + */ +static struct physmap_flash_data iq31244_flash_data = { + .width = 2, +}; + +static struct resource iq31244_flash_resource = { + .start = 0xf0000000, + .end = 0xf07fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device iq31244_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &iq31244_flash_data, + }, + .num_resources = 1, + .resource = &iq31244_flash_resource, +}; + +static struct plat_serial8250_port iq31244_serial_port[] = { + { + .mapbase = IQ31244_UART, + .membase = (char *)IQ31244_UART, + .irq = IRQ_IOP32X_XINT1, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = 1843200, + }, + { }, +}; + +static struct resource iq31244_uart_resource = { + .start = IQ31244_UART, + .end = IQ31244_UART + 7, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device iq31244_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = iq31244_serial_port, + }, + .num_resources = 1, + .resource = &iq31244_uart_resource, +}; + +/* + * This function will send a SHUTDOWN_COMPLETE message to the PIC + * controller over I2C. We are not using the i2c subsystem since + * we are going to power off and it may be removed + */ +void ep80219_power_off(void) +{ + /* + * Send the Address byte w/ the start condition + */ + *IOP3XX_IDBR1 = 0x60; + *IOP3XX_ICR1 = 0xE9; + mdelay(1); + + /* + * Send the START_MSG byte w/ no start or stop condition + */ + *IOP3XX_IDBR1 = 0x0F; + *IOP3XX_ICR1 = 0xE8; + mdelay(1); + + /* + * Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or + * stop condition + */ + *IOP3XX_IDBR1 = 0x03; + *IOP3XX_ICR1 = 0xE8; + mdelay(1); + + /* + * Send an ignored byte w/ stop condition + */ + *IOP3XX_IDBR1 = 0x00; + *IOP3XX_ICR1 = 0xEA; + + while (1) + ; +} + +static void __init iq31244_init_machine(void) +{ + platform_device_register(&iop3xx_i2c0_device); + platform_device_register(&iop3xx_i2c1_device); + platform_device_register(&iq31244_flash_device); + platform_device_register(&iq31244_serial_device); + + if (is_80219()) + pm_power_off = ep80219_power_off; +} + +MACHINE_START(IQ31244, "Intel IQ31244") + /* Maintainer: Intel Corp. */ + .phys_io = IQ31244_UART, + .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = iq31244_map_io, + .init_irq = iop32x_init_irq, + .timer = &iq31244_timer, + .init_machine = iq31244_init_machine, +MACHINE_END diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c new file mode 100644 index 000000000000..1f37b5501888 --- /dev/null +++ b/arch/arm/mach-iop32x/iq80321.c @@ -0,0 +1,193 @@ +/* + * arch/arm/mach-iop32x/iq80321.c + * + * Board support code for the Intel IQ80321 platform. + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/pci.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> +#include <asm/page.h> +#include <asm/pgtable.h> + +/* + * IQ80321 timer tick configuration. + */ +static void __init iq80321_timer_init(void) +{ + /* 33.333 MHz crystal. */ + iop3xx_init_time(200000000); +} + +static struct sys_timer iq80321_timer = { + .init = iq80321_timer_init, + .offset = iop3xx_gettimeoffset, +}; + + +/* + * IQ80321 I/O. + */ +static struct map_desc iq80321_io_desc[] __initdata = { + { /* on-board devices */ + .virtual = IQ80321_UART, + .pfn = __phys_to_pfn(IQ80321_UART), + .length = 0x00100000, + .type = MT_DEVICE, + }, +}; + +void __init iq80321_map_io(void) +{ + iop3xx_map_io(); + iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc)); +} + + +/* + * IQ80321 PCI. + */ +static inline int __init +iq80321_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + if ((slot == 2 || slot == 6) && pin == 1) { + /* PCI-X Slot INTA */ + irq = IRQ_IOP32X_XINT2; + } else if ((slot == 2 || slot == 6) && pin == 2) { + /* PCI-X Slot INTA */ + irq = IRQ_IOP32X_XINT3; + } else if ((slot == 2 || slot == 6) && pin == 3) { + /* PCI-X Slot INTA */ + irq = IRQ_IOP32X_XINT0; + } else if ((slot == 2 || slot == 6) && pin == 4) { + /* PCI-X Slot INTA */ + irq = IRQ_IOP32X_XINT1; + } else if (slot == 4 || slot == 8) { + /* Gig-E */ + irq = IRQ_IOP32X_XINT0; + } else { + printk(KERN_ERR "iq80321_pci_map_irq() called for unknown " + "device PCI:%d:%d:%d\n", dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + irq = -1; + } + + return irq; +} + +static struct hw_pci iq80321_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .scan = iop3xx_pci_scan_bus, + .map_irq = iq80321_pci_map_irq, +}; + +static int __init iq80321_pci_init(void) +{ + if (machine_is_iq80321()) + pci_common_init(&iq80321_pci); + + return 0; +} + +subsys_initcall(iq80321_pci_init); + + +/* + * IQ80321 machine initialisation. + */ +static struct physmap_flash_data iq80321_flash_data = { + .width = 1, +}; + +static struct resource iq80321_flash_resource = { + .start = 0xf0000000, + .end = 0xf07fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device iq80321_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &iq80321_flash_data, + }, + .num_resources = 1, + .resource = &iq80321_flash_resource, +}; + +static struct plat_serial8250_port iq80321_serial_port[] = { + { + .mapbase = IQ80321_UART, + .membase = (char *)IQ80321_UART, + .irq = IRQ_IOP32X_XINT1, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = 1843200, + }, + { }, +}; + +static struct resource iq80321_uart_resource = { + .start = IQ80321_UART, + .end = IQ80321_UART + 7, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device iq80321_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = iq80321_serial_port, + }, + .num_resources = 1, + .resource = &iq80321_uart_resource, +}; + +static void __init iq80321_init_machine(void) +{ + platform_device_register(&iop3xx_i2c0_device); + platform_device_register(&iop3xx_i2c1_device); + platform_device_register(&iq80321_flash_device); + platform_device_register(&iq80321_serial_device); +} + +MACHINE_START(IQ80321, "Intel IQ80321") + /* Maintainer: Intel Corp. */ + .phys_io = IQ80321_UART, + .io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = iq80321_map_io, + .init_irq = iop32x_init_irq, + .timer = &iq80321_timer, + .init_machine = iq80321_init_machine, +MACHINE_END diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c new file mode 100644 index 000000000000..69d6302f40cf --- /dev/null +++ b/arch/arm/mach-iop32x/irq.c @@ -0,0 +1,76 @@ +/* + * arch/arm/mach-iop32x/irq.c + * + * Generic IOP32X IRQ handling functionality + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <asm/mach/irq.h> +#include <asm/irq.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> + +static u32 iop32x_mask; + +static inline void intctl_write(u32 val) +{ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val)); + iop3xx_cp6_disable(); +} + +static inline void intstr_write(u32 val) +{ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val)); + iop3xx_cp6_disable(); +} + +static void +iop32x_irq_mask(unsigned int irq) +{ + iop32x_mask &= ~(1 << irq); + intctl_write(iop32x_mask); +} + +static void +iop32x_irq_unmask(unsigned int irq) +{ + iop32x_mask |= 1 << irq; + intctl_write(iop32x_mask); +} + +struct irq_chip ext_chip = { + .name = "IOP32x", + .ack = iop32x_irq_mask, + .mask = iop32x_irq_mask, + .unmask = iop32x_irq_unmask, +}; + +void __init iop32x_init_irq(void) +{ + int i; + + intctl_write(0); + intstr_write(0); + if (machine_is_glantank() || + machine_is_iq80321() || + machine_is_iq31244() || + machine_is_n2100()) + *IOP3XX_PCIIRSR = 0x0f; + + for (i = 0; i < NR_IRQS; i++) { + set_irq_chip(i, &ext_chip); + set_irq_handler(i, do_level_IRQ); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + } +} diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c new file mode 100644 index 000000000000..a2c94a47b2b2 --- /dev/null +++ b/arch/arm/mach-iop32x/n2100.c @@ -0,0 +1,251 @@ +/* + * arch/arm/mach-iop32x/n2100.c + * + * Board support code for the Thecus N2100 platform. + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * Copyright 2003 (c) MontaVista, Software, Inc. + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/pm.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/pci.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> +#include <asm/page.h> +#include <asm/pgtable.h> + +/* + * N2100 timer tick configuration. + */ +static void __init n2100_timer_init(void) +{ + /* 33.000 MHz crystal. */ + iop3xx_init_time(198000000); +} + +static struct sys_timer n2100_timer = { + .init = n2100_timer_init, + .offset = iop3xx_gettimeoffset, +}; + + +/* + * N2100 I/O. + */ +static struct map_desc n2100_io_desc[] __initdata = { + { /* on-board devices */ + .virtual = N2100_UART, + .pfn = __phys_to_pfn(N2100_UART), + .length = 0x00100000, + .type = MT_DEVICE + }, +}; + +void __init n2100_map_io(void) +{ + iop3xx_map_io(); + iotable_init(n2100_io_desc, ARRAY_SIZE(n2100_io_desc)); +} + + +/* + * N2100 PCI. + */ +static inline int __init +n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + if (PCI_SLOT(dev->devfn) == 1) { + /* RTL8110SB #1 */ + irq = IRQ_IOP32X_XINT0; + } else if (PCI_SLOT(dev->devfn) == 2) { + /* RTL8110SB #2 */ + irq = IRQ_IOP32X_XINT1; + } else if (PCI_SLOT(dev->devfn) == 3) { + /* Sil3512 */ + irq = IRQ_IOP32X_XINT2; + } else if (PCI_SLOT(dev->devfn) == 4 && pin == 1) { + /* VT6212 INTA */ + irq = IRQ_IOP32X_XINT1; + } else if (PCI_SLOT(dev->devfn) == 4 && pin == 2) { + /* VT6212 INTB */ + irq = IRQ_IOP32X_XINT0; + } else if (PCI_SLOT(dev->devfn) == 4 && pin == 3) { + /* VT6212 INTC */ + irq = IRQ_IOP32X_XINT2; + } else if (PCI_SLOT(dev->devfn) == 5) { + /* Mini-PCI slot */ + irq = IRQ_IOP32X_XINT3; + } else { + printk(KERN_ERR "n2100_pci_map_irq() called for unknown " + "device PCI:%d:%d:%d\n", dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + irq = -1; + } + + return irq; +} + +static struct hw_pci n2100_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .scan = iop3xx_pci_scan_bus, + .map_irq = n2100_pci_map_irq, +}; + +static int __init n2100_pci_init(void) +{ + if (machine_is_n2100()) + pci_common_init(&n2100_pci); + + return 0; +} + +subsys_initcall(n2100_pci_init); + + +/* + * N2100 machine initialisation. + */ +static struct physmap_flash_data n2100_flash_data = { + .width = 2, +}; + +static struct resource n2100_flash_resource = { + .start = 0xf0000000, + .end = 0xf0ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device n2100_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &n2100_flash_data, + }, + .num_resources = 1, + .resource = &n2100_flash_resource, +}; + + +static struct plat_serial8250_port n2100_serial_port[] = { + { + .mapbase = N2100_UART, + .membase = (char *)N2100_UART, + .irq = 0, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = 1843200, + }, + { }, +}; + +static struct resource n2100_uart_resource = { + .start = N2100_UART, + .end = N2100_UART + 7, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device n2100_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = n2100_serial_port, + }, + .num_resources = 1, + .resource = &n2100_uart_resource, +}; + + +/* + * Pull PCA9532 GPIO #8 low to power off the machine. + */ +static void n2100_power_off(void) +{ + local_irq_disable(); + + /* Start condition, I2C address of PCA9532, write transaction. */ + *IOP3XX_IDBR0 = 0xc0; + *IOP3XX_ICR0 = 0xe9; + mdelay(1); + + /* Write address 0x08. */ + *IOP3XX_IDBR0 = 0x08; + *IOP3XX_ICR0 = 0xe8; + mdelay(1); + + /* Write data 0x01, stop condition. */ + *IOP3XX_IDBR0 = 0x01; + *IOP3XX_ICR0 = 0xea; + + while (1) + ; +} + + +static struct timer_list power_button_poll_timer; + +static void power_button_poll(unsigned long dummy) +{ + if (gpio_line_get(N2100_POWER_BUTTON) == 0) { + ctrl_alt_del(); + return; + } + + power_button_poll_timer.expires = jiffies + (HZ / 10); + add_timer(&power_button_poll_timer); +} + + +static void __init n2100_init_machine(void) +{ + platform_device_register(&iop3xx_i2c0_device); + platform_device_register(&n2100_flash_device); + platform_device_register(&n2100_serial_device); + + pm_power_off = n2100_power_off; + + init_timer(&power_button_poll_timer); + power_button_poll_timer.function = power_button_poll; + power_button_poll_timer.expires = jiffies + (HZ / 10); + add_timer(&power_button_poll_timer); +} + +MACHINE_START(N2100, "Thecus N2100") + /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ + .phys_io = N2100_UART, + .io_pg_offst = ((N2100_UART) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = n2100_map_io, + .init_irq = iop32x_init_irq, + .timer = &n2100_timer, + .init_machine = n2100_init_machine, +MACHINE_END diff --git a/arch/arm/mach-iop33x/Kconfig b/arch/arm/mach-iop33x/Kconfig new file mode 100644 index 000000000000..9aa016bb18f9 --- /dev/null +++ b/arch/arm/mach-iop33x/Kconfig @@ -0,0 +1,21 @@ +if ARCH_IOP33X + +menu "IOP33x Implementation Options" + +comment "IOP33x Platform Types" + +config ARCH_IQ80331 + bool "Enable support for IQ80331" + help + Say Y here if you want to run your kernel on the Intel IQ80331 + evaluation kit for the IOP331 chipset. + +config MACH_IQ80332 + bool "Enable support for IQ80332" + help + Say Y here if you want to run your kernel on the Intel IQ80332 + evaluation kit for the IOP332 chipset. + +endmenu + +endif diff --git a/arch/arm/mach-iop33x/Makefile b/arch/arm/mach-iop33x/Makefile new file mode 100644 index 000000000000..90081d8c9d16 --- /dev/null +++ b/arch/arm/mach-iop33x/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the linux kernel. +# + +obj-y := irq.o uart.o +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_ARCH_IQ80331) += iq80331.o +obj-$(CONFIG_MACH_IQ80332) += iq80332.o diff --git a/arch/arm/mach-iop33x/Makefile.boot b/arch/arm/mach-iop33x/Makefile.boot new file mode 100644 index 000000000000..67039c3e0c48 --- /dev/null +++ b/arch/arm/mach-iop33x/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c new file mode 100644 index 000000000000..97a7b7488264 --- /dev/null +++ b/arch/arm/mach-iop33x/iq80331.c @@ -0,0 +1,148 @@ +/* + * arch/arm/mach-iop33x/iq80331.c + * + * Board support code for the Intel IQ80331 platform. + * + * Author: Dave Jiang <dave.jiang@intel.com> + * Copyright (C) 2003 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/pci.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> +#include <asm/page.h> +#include <asm/pgtable.h> + +/* + * IQ80331 timer tick configuration. + */ +static void __init iq80331_timer_init(void) +{ + /* D-Step parts run at a higher internal bus frequency */ + if (*IOP3XX_ATURID >= 0xa) + iop3xx_init_time(333000000); + else + iop3xx_init_time(266000000); +} + +static struct sys_timer iq80331_timer = { + .init = iq80331_timer_init, + .offset = iop3xx_gettimeoffset, +}; + + +/* + * IQ80331 PCI. + */ +static inline int __init +iq80331_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + if (slot == 1 && pin == 1) { + /* PCI-X Slot INTA */ + irq = IRQ_IOP33X_XINT1; + } else if (slot == 1 && pin == 2) { + /* PCI-X Slot INTB */ + irq = IRQ_IOP33X_XINT2; + } else if (slot == 1 && pin == 3) { + /* PCI-X Slot INTC */ + irq = IRQ_IOP33X_XINT3; + } else if (slot == 1 && pin == 4) { + /* PCI-X Slot INTD */ + irq = IRQ_IOP33X_XINT0; + } else if (slot == 2) { + /* GigE */ + irq = IRQ_IOP33X_XINT2; + } else { + printk(KERN_ERR "iq80331_pci_map_irq() called for unknown " + "device PCI:%d:%d:%d\n", dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + irq = -1; + } + + return irq; +} + +static struct hw_pci iq80331_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .scan = iop3xx_pci_scan_bus, + .map_irq = iq80331_pci_map_irq, +}; + +static int __init iq80331_pci_init(void) +{ + if (machine_is_iq80331()) + pci_common_init(&iq80331_pci); + + return 0; +} + +subsys_initcall(iq80331_pci_init); + + +/* + * IQ80331 machine initialisation. + */ +static struct physmap_flash_data iq80331_flash_data = { + .width = 1, +}; + +static struct resource iq80331_flash_resource = { + .start = 0xc0000000, + .end = 0xc07fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device iq80331_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &iq80331_flash_data, + }, + .num_resources = 1, + .resource = &iq80331_flash_resource, +}; + +static void __init iq80331_init_machine(void) +{ + platform_device_register(&iop3xx_i2c0_device); + platform_device_register(&iop3xx_i2c1_device); + platform_device_register(&iop33x_uart0_device); + platform_device_register(&iop33x_uart1_device); + platform_device_register(&iq80331_flash_device); +} + +MACHINE_START(IQ80331, "Intel IQ80331") + /* Maintainer: Intel Corp. */ + .phys_io = 0xfefff000, + .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = iop3xx_map_io, + .init_irq = iop33x_init_irq, + .timer = &iq80331_timer, + .init_machine = iq80331_init_machine, +MACHINE_END diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c new file mode 100644 index 000000000000..9887bfc1c078 --- /dev/null +++ b/arch/arm/mach-iop33x/iq80332.c @@ -0,0 +1,148 @@ +/* + * arch/arm/mach-iop33x/iq80332.c + * + * Board support code for the Intel IQ80332 platform. + * + * Author: Dave Jiang <dave.jiang@intel.com> + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/pci.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> +#include <asm/page.h> +#include <asm/pgtable.h> + +/* + * IQ80332 timer tick configuration. + */ +static void __init iq80332_timer_init(void) +{ + /* D-Step parts and the iop333 run at a higher internal bus frequency */ + if (*IOP3XX_ATURID >= 0xa || *IOP3XX_ATUDID == 0x374) + iop3xx_init_time(333000000); + else + iop3xx_init_time(266000000); +} + +static struct sys_timer iq80332_timer = { + .init = iq80332_timer_init, + .offset = iop3xx_gettimeoffset, +}; + + +/* + * IQ80332 PCI. + */ +static inline int __init +iq80332_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + if (slot == 4 && pin == 1) { + /* PCI-X Slot INTA */ + irq = IRQ_IOP33X_XINT0; + } else if (slot == 4 && pin == 2) { + /* PCI-X Slot INTB */ + irq = IRQ_IOP33X_XINT1; + } else if (slot == 4 && pin == 3) { + /* PCI-X Slot INTC */ + irq = IRQ_IOP33X_XINT2; + } else if (slot == 4 && pin == 4) { + /* PCI-X Slot INTD */ + irq = IRQ_IOP33X_XINT3; + } else if (slot == 6) { + /* GigE */ + irq = IRQ_IOP33X_XINT2; + } else { + printk(KERN_ERR "iq80332_pci_map_irq() called for unknown " + "device PCI:%d:%d:%d\n", dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + irq = -1; + } + + return irq; +} + +static struct hw_pci iq80332_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .scan = iop3xx_pci_scan_bus, + .map_irq = iq80332_pci_map_irq, +}; + +static int __init iq80332_pci_init(void) +{ + if (machine_is_iq80332()) + pci_common_init(&iq80332_pci); + + return 0; +} + +subsys_initcall(iq80332_pci_init); + + +/* + * IQ80332 machine initialisation. + */ +static struct physmap_flash_data iq80332_flash_data = { + .width = 1, +}; + +static struct resource iq80332_flash_resource = { + .start = 0xc0000000, + .end = 0xc07fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device iq80332_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &iq80332_flash_data, + }, + .num_resources = 1, + .resource = &iq80332_flash_resource, +}; + +static void __init iq80332_init_machine(void) +{ + platform_device_register(&iop3xx_i2c0_device); + platform_device_register(&iop3xx_i2c1_device); + platform_device_register(&iop33x_uart0_device); + platform_device_register(&iop33x_uart1_device); + platform_device_register(&iq80332_flash_device); +} + +MACHINE_START(IQ80332, "Intel IQ80332") + /* Maintainer: Intel Corp. */ + .phys_io = 0xfefff000, + .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = iop3xx_map_io, + .init_irq = iop33x_init_irq, + .timer = &iq80332_timer, + .init_machine = iq80332_init_machine, +MACHINE_END diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c new file mode 100644 index 000000000000..63304b3d0d76 --- /dev/null +++ b/arch/arm/mach-iop33x/irq.c @@ -0,0 +1,127 @@ +/* + * arch/arm/mach-iop33x/irq.c + * + * Generic IOP331 IRQ handling functionality + * + * Author: Dave Jiang <dave.jiang@intel.com> + * Copyright (C) 2003 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <asm/mach/irq.h> +#include <asm/irq.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> + +static u32 iop33x_mask0; +static u32 iop33x_mask1; + +static inline void intctl0_write(u32 val) +{ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val)); + iop3xx_cp6_disable(); +} + +static inline void intctl1_write(u32 val) +{ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c1, c0, 0" : : "r" (val)); + iop3xx_cp6_disable(); +} + +static inline void intstr0_write(u32 val) +{ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c2, c0, 0" : : "r" (val)); + iop3xx_cp6_disable(); +} + +static inline void intstr1_write(u32 val) +{ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c3, c0, 0" : : "r" (val)); + iop3xx_cp6_disable(); +} + +static inline void intbase_write(u32 val) +{ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c12, c0, 0" : : "r" (val)); + iop3xx_cp6_disable(); +} + +static inline void intsize_write(u32 val) +{ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c13, c0, 0" : : "r" (val)); + iop3xx_cp6_disable(); +} + +static void +iop33x_irq_mask1 (unsigned int irq) +{ + iop33x_mask0 &= ~(1 << irq); + intctl0_write(iop33x_mask0); +} + +static void +iop33x_irq_mask2 (unsigned int irq) +{ + iop33x_mask1 &= ~(1 << (irq - 32)); + intctl1_write(iop33x_mask1); +} + +static void +iop33x_irq_unmask1(unsigned int irq) +{ + iop33x_mask0 |= 1 << irq; + intctl0_write(iop33x_mask0); +} + +static void +iop33x_irq_unmask2(unsigned int irq) +{ + iop33x_mask1 |= (1 << (irq - 32)); + intctl1_write(iop33x_mask1); +} + +struct irq_chip iop33x_irqchip1 = { + .name = "IOP33x-1", + .ack = iop33x_irq_mask1, + .mask = iop33x_irq_mask1, + .unmask = iop33x_irq_unmask1, +}; + +struct irq_chip iop33x_irqchip2 = { + .name = "IOP33x-2", + .ack = iop33x_irq_mask2, + .mask = iop33x_irq_mask2, + .unmask = iop33x_irq_unmask2, +}; + +void __init iop33x_init_irq(void) +{ + int i; + + intctl0_write(0); + intctl1_write(0); + intstr0_write(0); + intstr1_write(0); + intbase_write(0); + intsize_write(1); + if (machine_is_iq80331()) + *IOP3XX_PCIIRSR = 0x0f; + + for (i = 0; i < NR_IRQS; i++) { + set_irq_chip(i, (i < 32) ? &iop33x_irqchip1 : &iop33x_irqchip2); + set_irq_handler(i, do_level_IRQ); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + } +} diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c new file mode 100644 index 000000000000..ac297cd0276c --- /dev/null +++ b/arch/arm/mach-iop33x/uart.c @@ -0,0 +1,105 @@ +/* + * arch/arm/mach-iop33x/uart.c + * + * Author: Dave Jiang (dave.jiang@intel.com) + * Copyright (C) 2004 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/major.h> +#include <linux/fs.h> +#include <linux/platform_device.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_8250.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/system.h> +#include <asm/memory.h> +#include <asm/hardware.h> +#include <asm/hardware/iop3xx.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#define IOP33X_UART_XTAL 33334000 + +static struct plat_serial8250_port iop33x_uart0_data[] = { + { + .membase = (char *)IOP33X_UART0_VIRT, + .mapbase = IOP33X_UART0_PHYS, + .irq = IRQ_IOP33X_UART0, + .uartclk = IOP33X_UART_XTAL, + .regshift = 2, + .iotype = UPIO_MEM, + .flags = UPF_SKIP_TEST, + }, + { }, +}; + +static struct resource iop33x_uart0_resources[] = { + [0] = { + .start = IOP33X_UART0_PHYS, + .end = IOP33X_UART0_PHYS + 0x3f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP33X_UART0, + .end = IRQ_IOP33X_UART0, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device iop33x_uart0_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = iop33x_uart0_data, + }, + .num_resources = 2, + .resource = iop33x_uart0_resources, +}; + + +static struct resource iop33x_uart1_resources[] = { + [0] = { + .start = IOP33X_UART1_PHYS, + .end = IOP33X_UART1_PHYS + 0x3f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP33X_UART1, + .end = IRQ_IOP33X_UART1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct plat_serial8250_port iop33x_uart1_data[] = { + { + .membase = (char *)IOP33X_UART1_VIRT, + .mapbase = IOP33X_UART1_PHYS, + .irq = IRQ_IOP33X_UART1, + .uartclk = IOP33X_UART_XTAL, + .regshift = 2, + .iotype = UPIO_MEM, + .flags = UPF_SKIP_TEST, + }, + { }, +}; + +struct platform_device iop33x_uart1_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = iop33x_uart1_data, + }, + .num_resources = 2, + .resource = iop33x_uart1_resources, +}; diff --git a/arch/arm/mach-iop3xx/Kconfig b/arch/arm/mach-iop3xx/Kconfig deleted file mode 100644 index 4422f2388607..000000000000 --- a/arch/arm/mach-iop3xx/Kconfig +++ /dev/null @@ -1,66 +0,0 @@ -if ARCH_IOP3XX - -menu "IOP3xx Implementation Options" - -comment "IOP3xx Platform Types" - -config ARCH_IQ80321 - bool "Enable support for IQ80321" - select ARCH_IOP321 - help - Say Y here if you want to run your kernel on the Intel IQ80321 - evaluation kit for the IOP321 chipset. - -config ARCH_IQ31244 - bool "Enable support for IQ31244" - select ARCH_IOP321 - help - Say Y here if you want to run your kernel on the Intel IQ31244 - evaluation kit for the IOP321 chipset. - -config ARCH_IQ80331 - bool "Enable support for IQ80331" - select ARCH_IOP331 - help - Say Y here if you want to run your kernel on the Intel IQ80331 - evaluation kit for the IOP331 chipset. - -config MACH_IQ80332 - bool "Enable support for IQ80332" - select ARCH_IOP331 - help - Say Y here if you want to run your kernel on the Intel IQ80332 - evaluation kit for the IOP332 chipset. - -config ARCH_EP80219 - bool "Enable support for EP80219" - select ARCH_IOP321 - select ARCH_IQ31244 - help - Say Y here if you want to run your kernel on the Intel EP80219 - evaluation kit for the Intel 80219 chipset (a IOP321 variant). - -# Which IOP variant are we running? -config ARCH_IOP321 - bool - help - The IQ80321 uses the IOP321 variant. - The IQ31244 and EP80219 uses the IOP321 variant. - -config ARCH_IOP331 - bool - default ARCH_IQ80331 - help - The IQ80331, IQ80332, and IQ80333 uses the IOP331 variant. - -comment "IOP3xx Chipset Features" - -config IOP331_STEPD - bool "Chip stepping D of the IOP80331 processor or IOP80333" - depends on (ARCH_IOP331) - help - Say Y here if you have StepD of the IOP80331 or IOP8033 - based platforms. - -endmenu -endif diff --git a/arch/arm/mach-iop3xx/Makefile b/arch/arm/mach-iop3xx/Makefile deleted file mode 100644 index b17eb1f46102..000000000000 --- a/arch/arm/mach-iop3xx/Makefile +++ /dev/null @@ -1,23 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := common.o - -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_ARCH_IOP321) += iop321-setup.o iop321-irq.o iop321-pci.o iop321-time.o - -obj-$(CONFIG_ARCH_IOP331) += iop331-setup.o iop331-irq.o iop331-pci.o iop331-time.o - -obj-$(CONFIG_ARCH_IQ80321) += iq80321-mm.o iq80321-pci.o - -obj-$(CONFIG_ARCH_IQ31244) += iq31244-mm.o iq31244-pci.o - -obj-$(CONFIG_ARCH_IQ80331) += iq80331-mm.o iq80331-pci.o - -obj-$(CONFIG_MACH_IQ80332) += iq80332-mm.o iq80332-pci.o diff --git a/arch/arm/mach-iop3xx/Makefile.boot b/arch/arm/mach-iop3xx/Makefile.boot deleted file mode 100644 index 6387aa20461b..000000000000 --- a/arch/arm/mach-iop3xx/Makefile.boot +++ /dev/null @@ -1,9 +0,0 @@ - zreladdr-y := 0xa0008000 -params_phys-y := 0xa0000100 -initrd_phys-y := 0xa0800000 -ifeq ($(CONFIG_ARCH_IOP331),y) - zreladdr-y := 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 -endif - diff --git a/arch/arm/mach-iop3xx/common.c b/arch/arm/mach-iop3xx/common.c deleted file mode 100644 index d7f50e57e753..000000000000 --- a/arch/arm/mach-iop3xx/common.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * arch/arm/mach-iop3xx/common.c - * - * Common routines shared across all IOP3xx implementations - * - * Author: Deepak Saxena <dsaxena@mvista.com> - * - * Copyright 2003 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/delay.h> -#include <asm/hardware.h> - -/* - * Shared variables - */ -unsigned long iop3xx_pcibios_min_io = 0; -unsigned long iop3xx_pcibios_min_mem = 0; - -#ifdef CONFIG_ARCH_EP80219 -#include <linux/kernel.h> -/* - * Default power-off for EP80219 - */ - -static inline void ep80219_send_to_pic(__u8 c) { -} - -void ep80219_power_off(void) -{ - /* - * This function will send a SHUTDOWN_COMPLETE message to the PIC controller - * over I2C. We are not using the i2c subsystem since we are going to power - * off and it may be removed - */ - - /* Send the Address byte w/ the start condition */ - *IOP321_IDBR1 = 0x60; - *IOP321_ICR1 = 0xE9; - mdelay(1); - - /* Send the START_MSG byte w/ no start or stop condition */ - *IOP321_IDBR1 = 0x0F; - *IOP321_ICR1 = 0xE8; - mdelay(1); - - /* Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or stop condition */ - *IOP321_IDBR1 = 0x03; - *IOP321_ICR1 = 0xE8; - mdelay(1); - - /* Send an ignored byte w/ stop condition */ - *IOP321_IDBR1 = 0x00; - *IOP321_ICR1 = 0xEA; - - while (1) ; -} - -#include <linux/init.h> -#include <linux/pm.h> - -static int __init ep80219_init(void) -{ - pm_power_off = ep80219_power_off; - return 0; -} -arch_initcall(ep80219_init); -#endif diff --git a/arch/arm/mach-iop3xx/iop321-irq.c b/arch/arm/mach-iop3xx/iop321-irq.c deleted file mode 100644 index 88ac333472c8..000000000000 --- a/arch/arm/mach-iop3xx/iop321-irq.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/iop321-irq.c - * - * Generic IOP321 IRQ handling functionality - * - * Author: Rory Bolt <rorybolt@pacbell.net> - * Copyright (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Added IOP3XX chipset and IQ80321 board masking code. - * - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/list.h> - -#include <asm/mach/irq.h> -#include <asm/irq.h> -#include <asm/hardware.h> - -#include <asm/mach-types.h> - -static u32 iop321_mask /* = 0 */; - -static inline void intctl_write(u32 val) -{ - asm volatile("mcr p6,0,%0,c0,c0,0"::"r" (val)); -} - -static inline void intstr_write(u32 val) -{ - asm volatile("mcr p6,0,%0,c4,c0,0"::"r" (val)); -} - -static void -iop321_irq_mask (unsigned int irq) -{ - - iop321_mask &= ~(1 << (irq - IOP321_IRQ_OFS)); - - intctl_write(iop321_mask); -} - -static void -iop321_irq_unmask (unsigned int irq) -{ - iop321_mask |= (1 << (irq - IOP321_IRQ_OFS)); - - intctl_write(iop321_mask); -} - -struct irq_chip ext_chip = { - .name = "IOP", - .ack = iop321_irq_mask, - .mask = iop321_irq_mask, - .unmask = iop321_irq_unmask, -}; - -void __init iop321_init_irq(void) -{ - unsigned int i, tmp; - - /* Enable access to coprocessor 6 for dealing with IRQs. - * From RMK: - * Basically, the Intel documentation here is poor. It appears that - * you need to set the bit to be able to access the coprocessor from - * SVC mode. Whether that allows access from user space or not is - * unclear. - */ - asm volatile ( - "mrc p15, 0, %0, c15, c1, 0\n\t" - "orr %0, %0, %1\n\t" - "mcr p15, 0, %0, c15, c1, 0\n\t" - /* The action is delayed, so we have to do this: */ - "mrc p15, 0, %0, c15, c1, 0\n\t" - "mov %0, %0\n\t" - "sub pc, pc, #4" - : "=r" (tmp) : "i" (1 << 6) ); - - intctl_write(0); // disable all interrupts - intstr_write(0); // treat all as IRQ - if(machine_is_iq80321() || - machine_is_iq31244()) // all interrupts are inputs to chip - *IOP321_PCIIRSR = 0x0f; - - for(i = IOP321_IRQ_OFS; i < NR_IOP321_IRQS; i++) - { - set_irq_chip(i, &ext_chip); - set_irq_handler(i, do_level_IRQ); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - - } -} - diff --git a/arch/arm/mach-iop3xx/iop321-pci.c b/arch/arm/mach-iop3xx/iop321-pci.c deleted file mode 100644 index 8ba6a0e23134..000000000000 --- a/arch/arm/mach-iop3xx/iop321-pci.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iop321-pci.c - * - * PCI support for the Intel IOP321 chipset - * - * Author: Rory Bolt <rorybolt@pacbell.net> - * Copyright (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/ioport.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/system.h> -#include <asm/hardware.h> -#include <asm/mach/pci.h> - -#include <asm/arch/iop321.h> - -// #define DEBUG - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) do { } while (0) -#endif - -/* - * This routine builds either a type0 or type1 configuration command. If the - * bus is on the 80321 then a type0 made, else a type1 is created. - */ -static u32 iop321_cfg_address(struct pci_bus *bus, int devfn, int where) -{ - struct pci_sys_data *sys = bus->sysdata; - u32 addr; - - if (sys->busnr == bus->number) - addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); - else - addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; - - addr |= PCI_FUNC(devfn) << 8 | (where & ~3); - - return addr; -} - -/* - * This routine checks the status of the last configuration cycle. If an error - * was detected it returns a 1, else it returns a 0. The errors being checked - * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during - * the discovery stage. - */ -static int iop321_pci_status(void) -{ - unsigned int status; - int ret = 0; - - /* - * Check the status registers. - */ - status = *IOP321_ATUSR; - if (status & 0xf900) - { - DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); - *IOP321_ATUSR = status & 0xf900; - ret = 1; - } - status = *IOP321_ATUISR; - if (status & 0x679f) - { - DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); - *IOP321_ATUISR = status & 0x679f; - ret = 1; - } - return ret; -} - -/* - * Simply write the address register and read the configuration - * data. Note that the 4 nop's ensure that we are able to handle - * a delayed abort (in theory.) - */ -static inline u32 iop321_read(unsigned long addr) -{ - u32 val; - - __asm__ __volatile__( - "str %1, [%2]\n\t" - "ldr %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : "=r" (val) - : "r" (addr), "r" (IOP321_OCCAR), "r" (IOP321_OCCDR)); - - return val; -} - -/* - * The read routines must check the error status of the last configuration - * cycle. If there was an error, the routine returns all hex f's. - */ -static int -iop321_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *value) -{ - unsigned long addr = iop321_cfg_address(bus, devfn, where); - u32 val = iop321_read(addr) >> ((where & 3) * 8); - - if( iop321_pci_status() ) - val = 0xffffffff; - - *value = val; - - return PCIBIOS_SUCCESSFUL; -} - -static int -iop321_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 value) -{ - unsigned long addr = iop321_cfg_address(bus, devfn, where); - u32 val; - - if (size != 4) { - val = iop321_read(addr); - if (!iop321_pci_status() == 0) - return PCIBIOS_SUCCESSFUL; - - where = (where & 3) * 8; - - if (size == 1) - val &= ~(0xff << where); - else - val &= ~(0xffff << where); - - *IOP321_OCCDR = val | value << where; - } else { - asm volatile( - "str %1, [%2]\n\t" - "str %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : - : "r" (value), "r" (addr), - "r" (IOP321_OCCAR), "r" (IOP321_OCCDR)); - } - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops iop321_ops = { - .read = iop321_read_config, - .write = iop321_write_config, -}; - -/* - * When a PCI device does not exist during config cycles, the 80200 gets a - * bus error instead of returning 0xffffffff. This handler simply returns. - */ -int -iop321_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", - addr, fsr, regs->ARM_pc, regs->ARM_lr); - - /* - * If it was an imprecise abort, then we need to correct the - * return address to be _after_ the instruction. - */ - if (fsr & (1 << 10)) - regs->ARM_pc += 4; - - return 0; -} - -/* - * Scan an IOP321 PCI bus. sys->bus defines which bus we scan. - */ -struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *sys) -{ - return pci_scan_bus(sys->busnr, &iop321_ops, sys); -} - -void iop321_init(void) -{ - DBG("PCI: Intel 80321 PCI init code.\n"); - DBG("ATU: IOP321_ATUCMD=0x%04x\n", *IOP321_ATUCMD); - DBG("ATU: IOP321_OMWTVR0=0x%04x, IOP321_OIOWTVR=0x%04x\n", - *IOP321_OMWTVR0, - *IOP321_OIOWTVR); - DBG("ATU: IOP321_ATUCR=0x%08x\n", *IOP321_ATUCR); - DBG("ATU: IOP321_IABAR0=0x%08x IOP321_IALR0=0x%08x IOP321_IATVR0=%08x\n", - *IOP321_IABAR0, *IOP321_IALR0, *IOP321_IATVR0); - DBG("ATU: IOP321_OMWTVR0=0x%08x\n", *IOP321_OMWTVR0); - DBG("ATU: IOP321_IABAR1=0x%08x IOP321_IALR1=0x%08x\n", - *IOP321_IABAR1, *IOP321_IALR1); - DBG("ATU: IOP321_ERBAR=0x%08x IOP321_ERLR=0x%08x IOP321_ERTVR=%08x\n", - *IOP321_ERBAR, *IOP321_ERLR, *IOP321_ERTVR); - DBG("ATU: IOP321_IABAR2=0x%08x IOP321_IALR2=0x%08x IOP321_IATVR2=%08x\n", - *IOP321_IABAR2, *IOP321_IALR2, *IOP321_IATVR2); - DBG("ATU: IOP321_IABAR3=0x%08x IOP321_IALR3=0x%08x IOP321_IATVR3=%08x\n", - *IOP321_IABAR3, *IOP321_IALR3, *IOP321_IATVR3); - - hook_fault_code(16+6, iop321_pci_abort, SIGBUS, "imprecise external abort"); -} - diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c deleted file mode 100644 index b6d096903c4a..000000000000 --- a/arch/arm/mach-iop3xx/iop321-setup.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/iop321-setup.c - * - * Author: Nicolas Pitre <nico@cam.org> - * Copyright (C) 2001 MontaVista Software, Inc. - * Copyright (C) 2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/major.h> -#include <linux/fs.h> -#include <linux/platform_device.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_core.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/system.h> -#include <asm/memory.h> -#include <asm/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#define IOP321_UART_XTAL 1843200 - -/* - * Standard IO mapping for all IOP321 based systems - */ -static struct map_desc iop321_std_desc[] __initdata = { - { /* mem mapped registers */ - .virtual = IOP321_VIRT_MEM_BASE, - .pfn = __phys_to_pfn(IOP321_PHYS_MEM_BASE), - .length = 0x00002000, - .type = MT_DEVICE - }, { /* PCI IO space */ - .virtual = IOP321_PCI_LOWER_IO_VA, - .pfn = __phys_to_pfn(IOP321_PCI_LOWER_IO_PA), - .length = IOP321_PCI_IO_WINDOW_SIZE, - .type = MT_DEVICE - } -}; - -#ifdef CONFIG_ARCH_IQ80321 -#define UARTBASE IQ80321_UART -#define IRQ_UART IRQ_IQ80321_UART -#endif - -#ifdef CONFIG_ARCH_IQ31244 -#define UARTBASE IQ31244_UART -#define IRQ_UART IRQ_IQ31244_UART -#endif - -static struct uart_port iop321_serial_ports[] = { - { - .membase = (char*)(UARTBASE), - .mapbase = (UARTBASE), - .irq = IRQ_UART, - .flags = UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 0, - .uartclk = IOP321_UART_XTAL, - .line = 0, - .type = PORT_16550A, - .fifosize = 16 - } -}; - -static struct resource iop32x_i2c_0_resources[] = { - [0] = { - .start = 0xfffff680, - .end = 0xfffff698, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP321_I2C_0, - .end = IRQ_IOP321_I2C_0, - .flags = IORESOURCE_IRQ - } -}; - -static struct resource iop32x_i2c_1_resources[] = { - [0] = { - .start = 0xfffff6a0, - .end = 0xfffff6b8, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP321_I2C_1, - .end = IRQ_IOP321_I2C_1, - .flags = IORESOURCE_IRQ - } -}; - -static struct platform_device iop32x_i2c_0_controller = { - .name = "IOP3xx-I2C", - .id = 0, - .num_resources = 2, - .resource = iop32x_i2c_0_resources -}; - -static struct platform_device iop32x_i2c_1_controller = { - .name = "IOP3xx-I2C", - .id = 1, - .num_resources = 2, - .resource = iop32x_i2c_1_resources -}; - -static struct platform_device *iop32x_devices[] __initdata = { - &iop32x_i2c_0_controller, - &iop32x_i2c_1_controller -}; - -void __init iop32x_init(void) -{ - if(iop_is_321()) - { - platform_add_devices(iop32x_devices, - ARRAY_SIZE(iop32x_devices)); - } -} - -void __init iop321_map_io(void) -{ - iotable_init(iop321_std_desc, ARRAY_SIZE(iop321_std_desc)); - early_serial_setup(&iop321_serial_ports[0]); -} - -#ifdef CONFIG_ARCH_IQ80321 -extern void iq80321_map_io(void); -extern struct sys_timer iop321_timer; -extern void iop321_init_time(void); -#endif - -#ifdef CONFIG_ARCH_IQ31244 -extern void iq31244_map_io(void); -extern struct sys_timer iop321_timer; -extern void iop321_init_time(void); -#endif - -#if defined(CONFIG_ARCH_IQ80321) -MACHINE_START(IQ80321, "Intel IQ80321") - /* Maintainer: Intel Corporation */ - .phys_io = IQ80321_UART, - .io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc, - .map_io = iq80321_map_io, - .init_irq = iop321_init_irq, - .timer = &iop321_timer, - .boot_params = 0xa0000100, - .init_machine = iop32x_init, -MACHINE_END -#elif defined(CONFIG_ARCH_IQ31244) -MACHINE_START(IQ31244, "Intel IQ31244") - /* Maintainer: Intel Corp. */ - .phys_io = IQ31244_UART, - .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, - .map_io = iq31244_map_io, - .init_irq = iop321_init_irq, - .timer = &iop321_timer, - .boot_params = 0xa0000100, - .init_machine = iop32x_init, -MACHINE_END -#else -#error No machine descriptor defined for this IOP3XX implementation -#endif diff --git a/arch/arm/mach-iop3xx/iop321-time.c b/arch/arm/mach-iop3xx/iop321-time.c deleted file mode 100644 index 04b1a6f7ebae..000000000000 --- a/arch/arm/mach-iop3xx/iop321-time.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iop321-time.c - * - * Timer code for IOP321 based systems - * - * Author: Deepak Saxena <dsaxena@mvista.com> - * - * Copyright 2002-2003 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/time.h> -#include <linux/init.h> -#include <linux/timex.h> - -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> - -#define IOP321_TIME_SYNC 0 - -static inline unsigned long get_elapsed(void) -{ - return LATCH - *IOP321_TU_TCR0; -} - -static unsigned long iop321_gettimeoffset(void) -{ - unsigned long elapsed, usec; - u32 tisr1, tisr2; - - /* - * If an interrupt was pending before we read the timer, - * we've already wrapped. Factor this into the time. - * If an interrupt was pending after we read the timer, - * it may have wrapped between checking the interrupt - * status and reading the timer. Re-read the timer to - * be sure its value is after the wrap. - */ - - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr1)); - elapsed = get_elapsed(); - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr2)); - - if(tisr1 & 1) - elapsed += LATCH; - else if (tisr2 & 1) - elapsed = LATCH + get_elapsed(); - - /* - * Now convert them to usec. - */ - usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000)); - - return usec; -} - -static irqreturn_t -iop321_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - u32 tisr; - - write_seqlock(&xtime_lock); - - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr)); - tisr |= 1; - asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (tisr)); - - timer_tick(regs); - - write_sequnlock(&xtime_lock); - - return IRQ_HANDLED; -} - -static struct irqaction iop321_timer_irq = { - .name = "IOP321 Timer Tick", - .handler = iop321_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER, -}; - -static void __init iop321_timer_init(void) -{ - u32 timer_ctl; - - setup_irq(IRQ_IOP321_TIMER0, &iop321_timer_irq); - - timer_ctl = IOP321_TMR_EN | IOP321_TMR_PRIVILEGED | IOP321_TMR_RELOAD | - IOP321_TMR_RATIO_1_1; - - asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (LATCH)); - - asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (timer_ctl)); -} - -struct sys_timer iop321_timer = { - .init = &iop321_timer_init, - .offset = iop321_gettimeoffset, -}; diff --git a/arch/arm/mach-iop3xx/iop331-irq.c b/arch/arm/mach-iop3xx/iop331-irq.c deleted file mode 100644 index cab11722ced2..000000000000 --- a/arch/arm/mach-iop3xx/iop331-irq.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/iop331-irq.c - * - * Generic IOP331 IRQ handling functionality - * - * Author: Dave Jiang <dave.jiang@intel.com> - * Copyright (C) 2003 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/list.h> - -#include <asm/mach/irq.h> -#include <asm/irq.h> -#include <asm/hardware.h> - -#include <asm/mach-types.h> - -static u32 iop331_mask0 = 0; -static u32 iop331_mask1 = 0; - -static inline void intctl_write0(u32 val) -{ - // INTCTL0 - asm volatile("mcr p6,0,%0,c0,c0,0"::"r" (val)); -} - -static inline void intctl_write1(u32 val) -{ - // INTCTL1 - asm volatile("mcr p6,0,%0,c1,c0,0"::"r" (val)); -} - -static inline void intstr_write0(u32 val) -{ - // INTSTR0 - asm volatile("mcr p6,0,%0,c2,c0,0"::"r" (val)); -} - -static inline void intstr_write1(u32 val) -{ - // INTSTR1 - asm volatile("mcr p6,0,%0,c3,c0,0"::"r" (val)); -} - -static void -iop331_irq_mask1 (unsigned int irq) -{ - iop331_mask0 &= ~(1 << (irq - IOP331_IRQ_OFS)); - intctl_write0(iop331_mask0); -} - -static void -iop331_irq_mask2 (unsigned int irq) -{ - iop331_mask1 &= ~(1 << (irq - IOP331_IRQ_OFS - 32)); - intctl_write1(iop331_mask1); -} - -static void -iop331_irq_unmask1(unsigned int irq) -{ - iop331_mask0 |= (1 << (irq - IOP331_IRQ_OFS)); - intctl_write0(iop331_mask0); -} - -static void -iop331_irq_unmask2(unsigned int irq) -{ - iop331_mask1 |= (1 << (irq - IOP331_IRQ_OFS - 32)); - intctl_write1(iop331_mask1); -} - -struct irq_chip iop331_irqchip1 = { - .name = "IOP-1", - .ack = iop331_irq_mask1, - .mask = iop331_irq_mask1, - .unmask = iop331_irq_unmask1, -}; - -struct irq_chip iop331_irqchip2 = { - .name = "IOP-2", - .ack = iop331_irq_mask2, - .mask = iop331_irq_mask2, - .unmask = iop331_irq_unmask2, -}; - -void __init iop331_init_irq(void) -{ - unsigned int i, tmp; - - /* Enable access to coprocessor 6 for dealing with IRQs. - * From RMK: - * Basically, the Intel documentation here is poor. It appears that - * you need to set the bit to be able to access the coprocessor from - * SVC mode. Whether that allows access from user space or not is - * unclear. - */ - asm volatile ( - "mrc p15, 0, %0, c15, c1, 0\n\t" - "orr %0, %0, %1\n\t" - "mcr p15, 0, %0, c15, c1, 0\n\t" - /* The action is delayed, so we have to do this: */ - "mrc p15, 0, %0, c15, c1, 0\n\t" - "mov %0, %0\n\t" - "sub pc, pc, #4" - : "=r" (tmp) : "i" (1 << 6) ); - - intctl_write0(0); // disable all interrupts - intctl_write1(0); - intstr_write0(0); // treat all as IRQ - intstr_write1(0); - if(machine_is_iq80331()) // all interrupts are inputs to chip - *IOP331_PCIIRSR = 0x0f; - - for(i = IOP331_IRQ_OFS; i < NR_IOP331_IRQS; i++) - { - set_irq_chip(i, (i < 32) ? &iop331_irqchip1 : &iop331_irqchip2); - set_irq_handler(i, do_level_IRQ); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } -} - diff --git a/arch/arm/mach-iop3xx/iop331-pci.c b/arch/arm/mach-iop3xx/iop331-pci.c deleted file mode 100644 index 44dd213b48a3..000000000000 --- a/arch/arm/mach-iop3xx/iop331-pci.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iop331-pci.c - * - * PCI support for the Intel IOP331 chipset - * - * Author: Dave Jiang (dave.jiang@intel.com) - * Copyright (C) 2003, 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/ioport.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/system.h> -#include <asm/hardware.h> -#include <asm/mach/pci.h> - -#include <asm/arch/iop331.h> - -#undef DEBUG -#undef DEBUG1 - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) do { } while (0) -#endif - -#ifdef DEBUG1 -#define DBG1(x...) printk(x) -#else -#define DBG1(x...) do { } while (0) -#endif - -/* - * This routine builds either a type0 or type1 configuration command. If the - * bus is on the 80331 then a type0 made, else a type1 is created. - */ -static u32 iop331_cfg_address(struct pci_bus *bus, int devfn, int where) -{ - struct pci_sys_data *sys = bus->sysdata; - u32 addr; - - if (sys->busnr == bus->number) - addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); - else - addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; - - addr |= PCI_FUNC(devfn) << 8 | (where & ~3); - - return addr; -} - -/* - * This routine checks the status of the last configuration cycle. If an error - * was detected it returns a 1, else it returns a 0. The errors being checked - * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during - * the discovery stage. - */ -static int iop331_pci_status(void) -{ - unsigned int status; - int ret = 0; - - /* - * Check the status registers. - */ - status = *IOP331_ATUSR; - if (status & 0xf900) - { - DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); - *IOP331_ATUSR = status & 0xf900; - ret = 1; - } - status = *IOP331_ATUISR; - if (status & 0x679f) - { - DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); - *IOP331_ATUISR = status & 0x679f; - ret = 1; - } - return ret; -} - -/* - * Simply write the address register and read the configuration - * data. Note that the 4 nop's ensure that we are able to handle - * a delayed abort (in theory.) - */ -static inline u32 iop331_read(unsigned long addr) -{ - u32 val; - - __asm__ __volatile__( - "str %1, [%2]\n\t" - "ldr %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : "=r" (val) - : "r" (addr), "r" (IOP331_OCCAR), "r" (IOP331_OCCDR)); - - return val; -} - -/* - * The read routines must check the error status of the last configuration - * cycle. If there was an error, the routine returns all hex f's. - */ -static int -iop331_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *value) -{ - unsigned long addr = iop331_cfg_address(bus, devfn, where); - u32 val = iop331_read(addr) >> ((where & 3) * 8); - - if( iop331_pci_status() ) - val = 0xffffffff; - - *value = val; - - return PCIBIOS_SUCCESSFUL; -} - -static int -iop331_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 value) -{ - unsigned long addr = iop331_cfg_address(bus, devfn, where); - u32 val; - - if (size != 4) { - val = iop331_read(addr); - if (!iop331_pci_status() == 0) - return PCIBIOS_SUCCESSFUL; - - where = (where & 3) * 8; - - if (size == 1) - val &= ~(0xff << where); - else - val &= ~(0xffff << where); - - *IOP331_OCCDR = val | value << where; - } else { - asm volatile( - "str %1, [%2]\n\t" - "str %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : - : "r" (value), "r" (addr), - "r" (IOP331_OCCAR), "r" (IOP331_OCCDR)); - } - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops iop331_ops = { - .read = iop331_read_config, - .write = iop331_write_config, -}; - -/* - * When a PCI device does not exist during config cycles, the XScale gets a - * bus error instead of returning 0xffffffff. This handler simply returns. - */ -int -iop331_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", - addr, fsr, regs->ARM_pc, regs->ARM_lr); - - /* - * If it was an imprecise abort, then we need to correct the - * return address to be _after_ the instruction. - */ - if (fsr & (1 << 10)) - regs->ARM_pc += 4; - - return 0; -} - -/* - * Scan an IOP331 PCI bus. sys->bus defines which bus we scan. - */ -struct pci_bus *iop331_scan_bus(int nr, struct pci_sys_data *sys) -{ - return pci_scan_bus(sys->busnr, &iop331_ops, sys); -} - -void iop331_init(void) -{ - DBG1("PCI: Intel 80331 PCI init code.\n"); - DBG1("\tATU: IOP331_ATUCMD=0x%04x\n", *IOP331_ATUCMD); - DBG1("\tATU: IOP331_OMWTVR0=0x%04x, IOP331_OIOWTVR=0x%04x\n", - *IOP331_OMWTVR0, - *IOP331_OIOWTVR); - DBG1("\tATU: IOP331_OMWTVR1=0x%04x\n", *IOP331_OMWTVR1); - DBG1("\tATU: IOP331_ATUCR=0x%08x\n", *IOP331_ATUCR); - DBG1("\tATU: IOP331_IABAR0=0x%08x IOP331_IALR0=0x%08x IOP331_IATVR0=%08x\n", *IOP331_IABAR0, *IOP331_IALR0, *IOP331_IATVR0); - DBG1("\tATU: IOP31_IABAR1=0x%08x IOP331_IALR1=0x%08x\n", *IOP331_IABAR1, *IOP331_IALR1); - DBG1("\tATU: IOP331_ERBAR=0x%08x IOP331_ERLR=0x%08x IOP331_ERTVR=%08x\n", *IOP331_ERBAR, *IOP331_ERLR, *IOP331_ERTVR); - DBG1("\tATU: IOP331_IABAR2=0x%08x IOP331_IALR2=0x%08x IOP331_IATVR2=%08x\n", *IOP331_IABAR2, *IOP331_IALR2, *IOP331_IATVR2); - DBG1("\tATU: IOP331_IABAR3=0x%08x IOP331_IALR3=0x%08x IOP331_IATVR3=%08x\n", *IOP331_IABAR3, *IOP331_IALR3, *IOP331_IATVR3); - - hook_fault_code(16+6, iop331_pci_abort, SIGBUS, "imprecise external abort"); -} - diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c deleted file mode 100644 index 3cc98d892ad4..000000000000 --- a/arch/arm/mach-iop3xx/iop331-setup.c +++ /dev/null @@ -1,221 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/iop331-setup.c - * - * Author: Dave Jiang (dave.jiang@intel.com) - * Copyright (C) 2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/major.h> -#include <linux/fs.h> -#include <linux/platform_device.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_8250.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/system.h> -#include <asm/memory.h> -#include <asm/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#define IOP331_UART_XTAL 33334000 - -/* - * Standard IO mapping for all IOP331 based systems - */ -static struct map_desc iop331_std_desc[] __initdata = { - { /* mem mapped registers */ - .virtual = IOP331_VIRT_MEM_BASE, - .pfn = __phys_to_pfn(IOP331_PHYS_MEM_BASE), - .length = 0x00002000, - .type = MT_DEVICE - }, { /* PCI IO space */ - .virtual = IOP331_PCI_LOWER_IO_VA, - .pfn = __phys_to_pfn(IOP331_PCI_LOWER_IO_PA), - .length = IOP331_PCI_IO_WINDOW_SIZE, - .type = MT_DEVICE - } -}; - -static struct resource iop33x_uart0_resources[] = { - [0] = { - .start = IOP331_UART0_PHYS, - .end = IOP331_UART0_PHYS + 0x3f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP331_UART0, - .end = IRQ_IOP331_UART0, - .flags = IORESOURCE_IRQ - } -}; - -static struct resource iop33x_uart1_resources[] = { - [0] = { - .start = IOP331_UART1_PHYS, - .end = IOP331_UART1_PHYS + 0x3f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP331_UART1, - .end = IRQ_IOP331_UART1, - .flags = IORESOURCE_IRQ - } -}; - -static struct plat_serial8250_port iop33x_uart0_data[] = { - { - .membase = (char*)(IOP331_UART0_VIRT), - .mapbase = (IOP331_UART0_PHYS), - .irq = IRQ_IOP331_UART0, - .uartclk = IOP331_UART_XTAL, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_SKIP_TEST, - }, - { }, -}; - -static struct plat_serial8250_port iop33x_uart1_data[] = { - { - .membase = (char*)(IOP331_UART1_VIRT), - .mapbase = (IOP331_UART1_PHYS), - .irq = IRQ_IOP331_UART1, - .uartclk = IOP331_UART_XTAL, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_SKIP_TEST, - }, - { }, -}; - -static struct platform_device iop33x_uart0 = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev.platform_data = iop33x_uart0_data, - .num_resources = 2, - .resource = iop33x_uart0_resources, -}; - -static struct platform_device iop33x_uart1 = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, - .dev.platform_data = iop33x_uart1_data, - .num_resources = 2, - .resource = iop33x_uart1_resources, -}; - -static struct resource iop33x_i2c_0_resources[] = { - [0] = { - .start = 0xfffff680, - .end = 0xfffff698, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP331_I2C_0, - .end = IRQ_IOP331_I2C_0, - .flags = IORESOURCE_IRQ - } -}; - -static struct resource iop33x_i2c_1_resources[] = { - [0] = { - .start = 0xfffff6a0, - .end = 0xfffff6b8, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP331_I2C_1, - .end = IRQ_IOP331_I2C_1, - .flags = IORESOURCE_IRQ - } -}; - -static struct platform_device iop33x_i2c_0_controller = { - .name = "IOP3xx-I2C", - .id = 0, - .num_resources = 2, - .resource = iop33x_i2c_0_resources -}; - -static struct platform_device iop33x_i2c_1_controller = { - .name = "IOP3xx-I2C", - .id = 1, - .num_resources = 2, - .resource = iop33x_i2c_1_resources -}; - -static struct platform_device *iop33x_devices[] __initdata = { - &iop33x_uart0, - &iop33x_uart1, - &iop33x_i2c_0_controller, - &iop33x_i2c_1_controller -}; - -void __init iop33x_init(void) -{ - if(iop_is_331()) - { - platform_add_devices(iop33x_devices, - ARRAY_SIZE(iop33x_devices)); - } -} - -void __init iop331_map_io(void) -{ - iotable_init(iop331_std_desc, ARRAY_SIZE(iop331_std_desc)); -} - -#ifdef CONFIG_ARCH_IOP331 -extern void iop331_init_irq(void); -extern struct sys_timer iop331_timer; -#endif - -#ifdef CONFIG_ARCH_IQ80331 -extern void iq80331_map_io(void); -#endif - -#ifdef CONFIG_MACH_IQ80332 -extern void iq80332_map_io(void); -#endif - -#if defined(CONFIG_ARCH_IQ80331) -MACHINE_START(IQ80331, "Intel IQ80331") - /* Maintainer: Intel Corp. */ - .phys_io = 0xfefff000, - .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical - .map_io = iq80331_map_io, - .init_irq = iop331_init_irq, - .timer = &iop331_timer, - .boot_params = 0x0100, - .init_machine = iop33x_init, -MACHINE_END - -#elif defined(CONFIG_MACH_IQ80332) -MACHINE_START(IQ80332, "Intel IQ80332") - /* Maintainer: Intel Corp. */ - .phys_io = 0xfefff000, - .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical - .map_io = iq80332_map_io, - .init_irq = iop331_init_irq, - .timer = &iop331_timer, - .boot_params = 0x0100, - .init_machine = iop33x_init, -MACHINE_END - -#else -#error No machine descriptor defined for this IOP3XX implementation -#endif - - diff --git a/arch/arm/mach-iop3xx/iop331-time.c b/arch/arm/mach-iop3xx/iop331-time.c deleted file mode 100644 index 0c09e74c5740..000000000000 --- a/arch/arm/mach-iop3xx/iop331-time.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iop331-time.c - * - * Timer code for IOP331 based systems - * - * Author: Dave Jiang <dave.jiang@intel.com> - * - * Copyright 2003 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/time.h> -#include <linux/init.h> -#include <linux/timex.h> - -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> - -static inline unsigned long get_elapsed(void) -{ - return LATCH - *IOP331_TU_TCR0; -} - -static unsigned long iop331_gettimeoffset(void) -{ - unsigned long elapsed, usec; - u32 tisr1, tisr2; - - /* - * If an interrupt was pending before we read the timer, - * we've already wrapped. Factor this into the time. - * If an interrupt was pending after we read the timer, - * it may have wrapped between checking the interrupt - * status and reading the timer. Re-read the timer to - * be sure its value is after the wrap. - */ - - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr1)); - elapsed = get_elapsed(); - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr2)); - - if(tisr1 & 1) - elapsed += LATCH; - else if (tisr2 & 1) - elapsed = LATCH + get_elapsed(); - - /* - * Now convert them to usec. - */ - usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000)); - - return usec; -} - -static irqreturn_t -iop331_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - u32 tisr; - - write_seqlock(&xtime_lock); - - asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr)); - tisr |= 1; - asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (tisr)); - - timer_tick(regs); - - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; -} - -static struct irqaction iop331_timer_irq = { - .name = "IOP331 Timer Tick", - .handler = iop331_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER, -}; - -static void __init iop331_timer_init(void) -{ - u32 timer_ctl; - - setup_irq(IRQ_IOP331_TIMER0, &iop331_timer_irq); - - timer_ctl = IOP331_TMR_EN | IOP331_TMR_PRIVILEGED | IOP331_TMR_RELOAD | - IOP331_TMR_RATIO_1_1; - - asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (LATCH)); - - asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (timer_ctl)); - -} - -struct sys_timer iop331_timer = { - .init = iop331_timer_init, - .offset = iop331_gettimeoffset, -}; diff --git a/arch/arm/mach-iop3xx/iq31244-mm.c b/arch/arm/mach-iop3xx/iq31244-mm.c deleted file mode 100644 index e874b54eefe3..000000000000 --- a/arch/arm/mach-iop3xx/iq31244-mm.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/mm.c - * - * Low level memory initialization for iq80321 platform - * - * Author: Rory Bolt <rorybolt@pacbell.net> - * Copyright (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/mm.h> -#include <linux/init.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> - -#include <asm/mach/map.h> - - -/* - * IQ80321 specific IO mappings - * - * We use RedBoot's setup for the onboard devices. - */ -static struct map_desc iq31244_io_desc[] __initdata = { - { /* on-board devices */ - .virtual = IQ31244_UART, - .pfn = __phys_to_pfn(IQ31244_UART), - .length = 0x00100000, - .type = MT_DEVICE - } -}; - -void __init iq31244_map_io(void) -{ - iop321_map_io(); - - iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc)); -} diff --git a/arch/arm/mach-iop3xx/iq31244-pci.c b/arch/arm/mach-iop3xx/iq31244-pci.c deleted file mode 100644 index f3c6413fa5bd..000000000000 --- a/arch/arm/mach-iop3xx/iq31244-pci.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iq80321-pci.c - * - * PCI support for the Intel IQ80321 reference board - * - * Author: Rory Bolt <rorybolt@pacbell.net> - * Copyright (C) 2002 Rory Bolt - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/slab.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/mach/pci.h> -#include <asm/mach-types.h> - -/* - * The following macro is used to lookup irqs in a standard table - * format for those systems that do not already have PCI - * interrupts properly routed. We assume 1 <= pin <= 4 - */ -#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ -({ int _ctl_ = -1; \ - unsigned int _idsel = idsel - minid; \ - if (_idsel <= maxid) \ - _ctl_ = pci_irq_table[_idsel][pin-1]; \ - _ctl_; }) - -#define INTA IRQ_IQ31244_INTA -#define INTB IRQ_IQ31244_INTB -#define INTC IRQ_IQ31244_INTC -#define INTD IRQ_IQ31244_INTD - -#define INTE IRQ_IQ31244_I82546 - -static inline int __init -iq31244_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) -{ - static int pci_irq_table[][4] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ -#ifdef CONFIG_ARCH_EP80219 - {INTB, INTB, INTB, INTB}, /* CFlash */ - {INTE, INTE, INTE, INTE}, /* 82551 Pro 100 */ - {INTD, INTD, INTD, INTD}, /* PCI-X Slot */ - {INTC, INTC, INTC, INTC}, /* SATA */ -#else - {INTB, INTB, INTB, INTB}, /* CFlash */ - {INTC, INTC, INTC, INTC}, /* SATA */ - {INTD, INTD, INTD, INTD}, /* PCI-X Slot */ - {INTE, INTE, INTE, INTE}, /* 82546 GigE */ -#endif // CONFIG_ARCH_EP80219 - }; - - BUG_ON(pin < 1 || pin > 4); - - return PCI_IRQ_TABLE_LOOKUP(0, 7); -} - -static int iq31244_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if(nr != 0) - return 0; - - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("PCI: unable to alloc resources"); - - res[0].start = IOP321_PCI_LOWER_IO_VA; - res[0].end = IOP321_PCI_UPPER_IO_VA; - res[0].name = "IQ31244 PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - - res[1].start = IOP321_PCI_LOWER_MEM_PA; - res[1].end = IOP321_PCI_UPPER_MEM_PA; - res[1].name = "IQ31244 PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); - - sys->mem_offset = IOP321_PCI_MEM_OFFSET; - sys->io_offset = IOP321_PCI_IO_OFFSET; - - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; - - return 1; -} - -static void iq31244_preinit(void) -{ - iop321_init(); -} - -static struct hw_pci iq31244_pci __initdata = { - .swizzle = pci_std_swizzle, - .nr_controllers = 1, - .setup = iq31244_setup, - .scan = iop321_scan_bus, - .preinit = iq31244_preinit, - .map_irq = iq31244_map_irq -}; - -static int __init iq31244_pci_init(void) -{ - if (machine_is_iq31244()) - pci_common_init(&iq31244_pci); - return 0; -} - -subsys_initcall(iq31244_pci_init); - - - - diff --git a/arch/arm/mach-iop3xx/iq80321-mm.c b/arch/arm/mach-iop3xx/iq80321-mm.c deleted file mode 100644 index d9cac5e1fc3d..000000000000 --- a/arch/arm/mach-iop3xx/iq80321-mm.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/mm.c - * - * Low level memory initialization for iq80321 platform - * - * Author: Rory Bolt <rorybolt@pacbell.net> - * Copyright (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/mm.h> -#include <linux/init.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> - -#include <asm/mach/map.h> - - -/* - * IQ80321 specific IO mappings - * - * We use RedBoot's setup for the onboard devices. - */ -static struct map_desc iq80321_io_desc[] __initdata = { - { /* on-board devices */ - .virtual = IQ80321_UART, - .pfn = __phys_to_pfn(IQ80321_UART), - .length = 0x00100000, - .type = MT_DEVICE - } -}; - -void __init iq80321_map_io(void) -{ - iop321_map_io(); - - iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc)); -} diff --git a/arch/arm/mach-iop3xx/iq80321-pci.c b/arch/arm/mach-iop3xx/iq80321-pci.c deleted file mode 100644 index d9758d3f6e7f..000000000000 --- a/arch/arm/mach-iop3xx/iq80321-pci.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iq80321-pci.c - * - * PCI support for the Intel IQ80321 reference board - * - * Author: Rory Bolt <rorybolt@pacbell.net> - * Copyright (C) 2002 Rory Bolt - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/slab.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/mach/pci.h> -#include <asm/mach-types.h> - -/* - * The following macro is used to lookup irqs in a standard table - * format for those systems that do not already have PCI - * interrupts properly routed. We assume 1 <= pin <= 4 - */ -#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ -({ int _ctl_ = -1; \ - unsigned int _idsel = idsel - minid; \ - if (_idsel <= maxid) \ - _ctl_ = pci_irq_table[_idsel][pin-1]; \ - _ctl_; }) - -#define INTA IRQ_IQ80321_INTA -#define INTB IRQ_IQ80321_INTB -#define INTC IRQ_IQ80321_INTC -#define INTD IRQ_IQ80321_INTD - -#define INTE IRQ_IQ80321_I82544 - -static inline int __init -iq80321_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) -{ - static int pci_irq_table[][4] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - {INTE, INTE, INTE, INTE}, /* Gig-E */ - {-1, -1, -1, -1}, /* Unused */ - {INTC, INTD, INTA, INTB}, /* PCI-X Slot */ - {-1, -1, -1, -1}, - }; - - BUG_ON(pin < 1 || pin > 4); - -// return PCI_IRQ_TABLE_LOOKUP(4, 7); - return pci_irq_table[idsel%4][pin-1]; -} - -static int iq80321_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if(nr != 0) - return 0; - - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("PCI: unable to alloc resources"); - - res[0].start = IOP321_PCI_LOWER_IO_VA; - res[0].end = IOP321_PCI_UPPER_IO_VA; - res[0].name = "IQ80321 PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - - res[1].start = IOP321_PCI_LOWER_MEM_PA; - res[1].end = IOP321_PCI_UPPER_MEM_PA; - res[1].name = "IQ80321 PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); - - sys->mem_offset = IOP321_PCI_MEM_OFFSET; - sys->io_offset = IOP321_PCI_IO_OFFSET; - - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; - - return 1; -} - -static void iq80321_preinit(void) -{ - iop321_init(); -} - -static struct hw_pci iq80321_pci __initdata = { - .swizzle = pci_std_swizzle, - .nr_controllers = 1, - .setup = iq80321_setup, - .scan = iop321_scan_bus, - .preinit = iq80321_preinit, - .map_irq = iq80321_map_irq -}; - -static int __init iq80321_pci_init(void) -{ - if (machine_is_iq80321()) - pci_common_init(&iq80321_pci); - return 0; -} - -subsys_initcall(iq80321_pci_init); - - - - diff --git a/arch/arm/mach-iop3xx/iq80331-mm.c b/arch/arm/mach-iop3xx/iq80331-mm.c deleted file mode 100644 index 129eb49b0670..000000000000 --- a/arch/arm/mach-iop3xx/iq80331-mm.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/mm.c - * - * Low level memory initialization for iq80331 platform - * - * Author: Dave Jiang <dave.jiang@intel.com> - * Copyright (C) 2003 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/mm.h> -#include <linux/init.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> - -#include <asm/mach/map.h> - - -/* - * IQ80331 specific IO mappings - * - * We use RedBoot's setup for the onboard devices. - */ - -void __init iq80331_map_io(void) -{ - iop331_map_io(); -} diff --git a/arch/arm/mach-iop3xx/iq80331-pci.c b/arch/arm/mach-iop3xx/iq80331-pci.c deleted file mode 100644 index 40d861002492..000000000000 --- a/arch/arm/mach-iop3xx/iq80331-pci.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iq80331-pci.c - * - * PCI support for the Intel IQ80331 reference board - * - * Author: Dave Jiang <dave.jiang@intel.com> - * Copyright (C) 2003, 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/slab.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/mach/pci.h> -#include <asm/mach-types.h> - -/* - * The following macro is used to lookup irqs in a standard table - * format for those systems that do not already have PCI - * interrupts properly routed. We assume 1 <= pin <= 4 - */ -#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ -({ int _ctl_ = -1; \ - unsigned int _idsel = idsel - minid; \ - if (_idsel <= maxid) \ - _ctl_ = pci_irq_table[_idsel][pin-1]; \ - _ctl_; }) - -#define INTA IRQ_IQ80331_INTA -#define INTB IRQ_IQ80331_INTB -#define INTC IRQ_IQ80331_INTC -#define INTD IRQ_IQ80331_INTD - -//#define INTE IRQ_IQ80331_I82544 - -static inline int __init -iq80331_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) -{ - static int pci_irq_table[][4] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - {INTB, INTC, INTD, INTA}, /* PCI-X Slot */ - {INTC, INTC, INTC, INTC}, /* GigE */ - }; - - BUG_ON(pin < 1 || pin > 4); - - return PCI_IRQ_TABLE_LOOKUP(1, 7); -} - -static int iq80331_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if(nr != 0) - return 0; - - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("PCI: unable to alloc resources"); - - res[0].start = IOP331_PCI_LOWER_IO_VA; - res[0].end = IOP331_PCI_UPPER_IO_VA; - res[0].name = "IQ80331 PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - - res[1].start = IOP331_PCI_LOWER_MEM_PA; - res[1].end = IOP331_PCI_UPPER_MEM_PA; - res[1].name = "IQ80331 PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); - - sys->mem_offset = IOP331_PCI_MEM_OFFSET; - sys->io_offset = IOP331_PCI_IO_OFFSET; - - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; - - return 1; -} - -static void iq80331_preinit(void) -{ - iop331_init(); -} - -static struct hw_pci iq80331_pci __initdata = { - .swizzle = pci_std_swizzle, - .nr_controllers = 1, - .setup = iq80331_setup, - .scan = iop331_scan_bus, - .preinit = iq80331_preinit, - .map_irq = iq80331_map_irq -}; - -static int __init iq80331_pci_init(void) -{ - if (machine_is_iq80331()) - pci_common_init(&iq80331_pci); - return 0; -} - -subsys_initcall(iq80331_pci_init); - - - - diff --git a/arch/arm/mach-iop3xx/iq80332-mm.c b/arch/arm/mach-iop3xx/iq80332-mm.c deleted file mode 100644 index 2feaf7591f53..000000000000 --- a/arch/arm/mach-iop3xx/iq80332-mm.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/arch/arm/mach-iop3xx/mm.c - * - * Low level memory initialization for iq80332 platform - * - * Author: Dave Jiang <dave.jiang@intel.com> - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/mm.h> -#include <linux/init.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> - -#include <asm/mach/map.h> - - -/* - * IQ80332 specific IO mappings - * - * We use RedBoot's setup for the onboard devices. - */ - -void __init iq80332_map_io(void) -{ - iop331_map_io(); -} diff --git a/arch/arm/mach-iop3xx/iq80332-pci.c b/arch/arm/mach-iop3xx/iq80332-pci.c deleted file mode 100644 index afc0676318e4..000000000000 --- a/arch/arm/mach-iop3xx/iq80332-pci.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * arch/arm/mach-iop3xx/iq80332-pci.c - * - * PCI support for the Intel IQ80332 reference board - * - * Author: Dave Jiang <dave.jiang@intel.com> - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/slab.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/mach/pci.h> -#include <asm/mach-types.h> - -/* - * The following macro is used to lookup irqs in a standard table - * format for those systems that do not already have PCI - * interrupts properly routed. We assume 1 <= pin <= 4 - */ -#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ -({ int _ctl_ = -1; \ - unsigned int _idsel = idsel - minid; \ - if (_idsel <= maxid) \ - _ctl_ = pci_irq_table[_idsel][pin-1]; \ - _ctl_; }) - -#define INTA IRQ_IQ80332_INTA -#define INTB IRQ_IQ80332_INTB -#define INTC IRQ_IQ80332_INTC -#define INTD IRQ_IQ80332_INTD - -//#define INTE IRQ_IQ80332_I82544 - -static inline int __init -iq80332_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) -{ - static int pci_irq_table[][8] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - {-1, -1, -1, -1}, - {-1, -1, -1, -1}, - {-1, -1, -1, -1}, - {INTA, INTB, INTC, INTD}, /* PCI-X Slot */ - {-1, -1, -1, -1}, - {INTC, INTC, INTC, INTC}, /* GigE */ - {-1, -1, -1, -1}, - {-1, -1, -1, -1}, - }; - - BUG_ON(pin < 1 || pin > 4); - - return PCI_IRQ_TABLE_LOOKUP(1, 7); -} - -static int iq80332_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if(nr != 0) - return 0; - - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("PCI: unable to alloc resources"); - - res[0].start = IOP331_PCI_LOWER_IO_VA; - res[0].end = IOP331_PCI_UPPER_IO_VA; - res[0].name = "IQ80332 PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - - res[1].start = IOP331_PCI_LOWER_MEM_PA; - res[1].end = IOP331_PCI_UPPER_MEM_PA; - res[1].name = "IQ80332 PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); - - sys->mem_offset = IOP331_PCI_MEM_OFFSET; - sys->io_offset = IOP331_PCI_IO_OFFSET; - - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; - - return 1; -} - -static void iq80332_preinit(void) -{ - iop331_init(); -} - -static struct hw_pci iq80332_pci __initdata = { - .swizzle = pci_std_swizzle, - .nr_controllers = 1, - .setup = iq80332_setup, - .scan = iop331_scan_bus, - .preinit = iq80332_preinit, - .map_irq = iq80332_map_irq -}; - -static int __init iq80332_pci_init(void) -{ - if (machine_is_iq80332()) - pci_common_init(&iq80332_pci); - return 0; -} - -subsys_initcall(iq80332_pci_init); - - - - diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 7c25dbd5a181..35dd8b3824b0 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -26,6 +26,7 @@ #include <linux/bitops.h> #include <linux/time.h> #include <linux/timex.h> +#include <linux/clocksource.h> #include <asm/hardware.h> #include <asm/uaccess.h> @@ -255,16 +256,6 @@ static unsigned volatile last_jiffy_time; #define CLOCK_TICKS_PER_USEC ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC) -/* IRQs are disabled before entering here from do_gettimeofday() */ -static unsigned long ixp4xx_gettimeoffset(void) -{ - u32 elapsed; - - elapsed = *IXP4XX_OSTS - last_jiffy_time; - - return elapsed / CLOCK_TICKS_PER_USEC; -} - static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { write_seqlock(&xtime_lock); @@ -309,7 +300,6 @@ static void __init ixp4xx_timer_init(void) struct sys_timer ixp4xx_timer = { .init = ixp4xx_timer_init, - .offset = ixp4xx_gettimeoffset, }; static struct resource ixp46x_i2c_resources[] = { @@ -365,3 +355,29 @@ void __init ixp4xx_sys_init(void) ixp4xx_exp_bus_size >> 20); } +cycle_t ixp4xx_get_cycles(void) +{ + return *IXP4XX_OSTS; +} + +static struct clocksource clocksource_ixp4xx = { + .name = "OSTS", + .rating = 200, + .read = ixp4xx_get_cycles, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .is_continuous = 1, +}; + +unsigned long ixp4xx_timer_freq = FREQ; +static int __init ixp4xx_clocksource_init(void) +{ + clocksource_ixp4xx.mult = + clocksource_hz2mult(ixp4xx_timer_freq, + clocksource_ixp4xx.shift); + clocksource_register(&clocksource_ixp4xx); + + return 0; +} + +device_initcall(ixp4xx_clocksource_init); diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 749a337494d3..162c266e5f8f 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -159,6 +159,8 @@ static void nslu2_power_off(void) static void __init nslu2_init(void) { + ixp4xx_timer_freq = NSLU2_FREQ; + ixp4xx_sys_init(); nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index c753a3c5aadd..62e42c7a628e 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -172,9 +172,11 @@ static struct resource kp_resources[] = { }; static struct omap_kp_platform_data kp_data = { - .rows = 8, - .cols = 8, - .keymap = fsample_keymap, + .rows = 8, + .cols = 8, + .keymap = fsample_keymap, + .keymapsize = ARRAY_SIZE(fsample_keymap), + .delay = 4, }; static struct platform_device kp_device = { diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index cd3a06dfc0a8..6e113078f7ab 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -167,10 +167,13 @@ static struct resource h2_kp_resources[] = { }; static struct omap_kp_platform_data h2_kp_data = { - .rows = 8, - .cols = 8, - .keymap = h2_keymap, - .rep = 1, + .rows = 8, + .cols = 8, + .keymap = h2_keymap, + .keymapsize = ARRAY_SIZE(h2_keymap), + .rep = 1, + .delay = 9, + .dbounce = 1, }; static struct platform_device h2_kp_device = { diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 7b206116cd03..f225a083dee1 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -247,10 +247,13 @@ static struct resource h3_kp_resources[] = { }; static struct omap_kp_platform_data h3_kp_data = { - .rows = 8, - .cols = 8, - .keymap = h3_keymap, - .rep = 1, + .rows = 8, + .cols = 8, + .keymap = h3_keymap, + .keymapsize = ARRAY_SIZE(h3_keymap), + .rep = 1, + .delay = 9, + .dbounce = 1, }; static struct platform_device h3_kp_device = { diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 4cbc62db5b5d..cb00530ad279 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -159,9 +159,11 @@ static struct resource innovator_kp_resources[] = { }; static struct omap_kp_platform_data innovator_kp_data = { - .rows = 8, - .cols = 8, - .keymap = innovator_keymap, + .rows = 8, + .cols = 8, + .keymap = innovator_keymap, + .keymapsize = ARRAY_SIZE(innovator_keymap), + .delay = 4, }; static struct platform_device innovator_kp_device = { diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 02b980d77b12..dbc555d209ff 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -71,9 +71,11 @@ static struct resource nokia770_kp_resources[] = { }; static struct omap_kp_platform_data nokia770_kp_data = { - .rows = 8, - .cols = 8, - .keymap = nokia770_keymap + .rows = 8, + .cols = 8, + .keymap = nokia770_keymap, + .keymapsize = ARRAY_SIZE(nokia770_keymap) + .delay = 4, }; static struct platform_device nokia770_kp_device = { diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index b742261c97ad..6b05647a6c01 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -266,9 +266,11 @@ static const int osk_keymap[] = { }; static struct omap_kp_platform_data osk_kp_data = { - .rows = 8, - .cols = 8, - .keymap = (int *) osk_keymap, + .rows = 8, + .cols = 8, + .keymap = (int *) osk_keymap, + .keymapsize = ARRAY_SIZE(osk_keymap), + .delay = 9, }; static struct resource osk5912_kp_resources[] = { diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 64b45d8ae357..fa4be962df67 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -171,9 +171,12 @@ static struct resource kp_resources[] = { }; static struct omap_kp_platform_data kp_data = { - .rows = 8, - .cols = 8, - .keymap = p2_keymap, + .rows = 8, + .cols = 8, + .keymap = p2_keymap, + .keymapsize = ARRAY_SIZE(p2_keymap), + .delay = 4, + .dbounce = 1, }; static struct platform_device kp_device = { diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index f1958e882e86..638490e62d5f 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -20,6 +20,7 @@ #include <linux/clk.h> #include <asm/io.h> +#include <asm/mach-types.h> #include <asm/arch/cpu.h> #include <asm/arch/usb.h> @@ -586,77 +587,53 @@ static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) *-------------------------------------------------------------------------*/ #ifdef CONFIG_OMAP_RESET_CLOCKS -/* - * Resets some clocks that may be left on from bootloader, - * but leaves serial clocks on. See also omap_late_clk_reset(). - */ -static inline void omap1_early_clk_reset(void) -{ - //omap_writel(0x3 << 29, MOD_CONF_CTRL_0); -} -static int __init omap1_late_clk_reset(void) +static void __init omap1_clk_disable_unused(struct clk *clk) { - /* Turn off all unused clocks */ - struct clk *p; __u32 regval32; - /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ - regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4); - omap_writew(regval32, SOFT_REQ_REG); - omap_writew(0, SOFT_REQ_REG2); - - list_for_each_entry(p, &clocks, node) { - if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) || - p->enable_reg == 0) - continue; - - /* Clocks in the DSP domain need api_ck. Just assume bootloader - * has not enabled any DSP clocks */ - if ((u32)p->enable_reg == DSP_IDLECT2) { - printk(KERN_INFO "Skipping reset check for DSP domain " - "clock \"%s\"\n", p->name); - continue; - } + /* Clocks in the DSP domain need api_ck. Just assume bootloader + * has not enabled any DSP clocks */ + if ((u32)clk->enable_reg == DSP_IDLECT2) { + printk(KERN_INFO "Skipping reset check for DSP domain " + "clock \"%s\"\n", clk->name); + return; + } - /* Is the clock already disabled? */ - if (p->flags & ENABLE_REG_32BIT) { - if (p->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readl(p->enable_reg); - else - regval32 = omap_readl(p->enable_reg); - } else { - if (p->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readw(p->enable_reg); + /* Is the clock already disabled? */ + if (clk->flags & ENABLE_REG_32BIT) { + if (clk->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readl(clk->enable_reg); else - regval32 = omap_readw(p->enable_reg); - } - - if ((regval32 & (1 << p->enable_bit)) == 0) - continue; + regval32 = omap_readl(clk->enable_reg); + } else { + if (clk->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readw(clk->enable_reg); + else + regval32 = omap_readw(clk->enable_reg); + } - /* FIXME: This clock seems to be necessary but no-one - * has asked for its activation. */ - if (p == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera - || p == &ck_dpll1out.clk // FIX: SoSSI, SSR - || p == &arm_gpio_ck // FIX: GPIO code for 1510 - ) { - printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", - p->name); - continue; - } + if ((regval32 & (1 << clk->enable_bit)) == 0) + return; - printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name); - p->disable(p); - printk(" done\n"); + /* FIXME: This clock seems to be necessary but no-one + * has asked for its activation. */ + if (clk == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera + || clk == &ck_dpll1out.clk // FIX: SoSSI, SSR + || clk == &arm_gpio_ck // FIX: GPIO code for 1510 + ) { + printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", + clk->name); + return; } - return 0; + printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name); + clk->disable(clk); + printk(" done\n"); } -late_initcall(omap1_late_clk_reset); #else -#define omap1_early_clk_reset() {} +#define omap1_clk_disable_unused NULL #endif static struct clk_functions omap1_clk_functions = { @@ -664,6 +641,7 @@ static struct clk_functions omap1_clk_functions = { .clk_disable = omap1_clk_disable, .clk_round_rate = omap1_clk_round_rate, .clk_set_rate = omap1_clk_set_rate, + .clk_disable_unused = omap1_clk_disable_unused, }; int __init omap1_clk_init(void) @@ -671,8 +649,13 @@ int __init omap1_clk_init(void) struct clk ** clkp; const struct omap_clock_config *info; int crystal_type = 0; /* Default 12 MHz */ + u32 reg; + + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ + reg = omap_readw(SOFT_REQ_REG) & (1 << 4); + omap_writew(reg, SOFT_REQ_REG); + omap_writew(0, SOFT_REQ_REG2); - omap1_early_clk_reset(); clk_init(&omap1_clk_functions); /* By default all idlect1 clocks are allowed to idle */ @@ -772,6 +755,12 @@ int __init omap1_clk_init(void) omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); #endif + /* Amstrad Delta wants BCLK high when inactive */ + if (machine_is_ams_delta()) + omap_writel(omap_readl(ULPD_CLOCK_CTRL) | + (1 << SDW_MCLK_INV_BIT), + ULPD_CLOCK_CTRL); + /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ /* (on 730, bit 13 must not be cleared) */ if (cpu_is_omap730()) diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index b7c68819c4e7..f7df00205c4a 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -89,6 +89,7 @@ struct arm_idlect1_clk { #define EN_DSPTIMCK 5 /* Various register defines for clock controls scattered around OMAP chip */ +#define SDW_MCLK_INV_BIT 2 /* In ULPD_CLKC_CTRL */ #define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */ #define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */ #define SWD_ULPD_PLL_CLK_REQ 1 /* In SWD_CLK_DIV_CTRL_SEL */ @@ -741,6 +742,18 @@ static struct clk i2c_fck = { .disable = &omap1_clk_disable_generic, }; +static struct clk i2c_ick = { + .name = "i2c_ick", + .id = 1, + .flags = CLOCK_IN_OMAP16XX | + VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT | + ALWAYS_ENABLED, + .parent = &armper_ck.clk, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable_generic, + .disable = &omap1_clk_disable_generic, +}; + static struct clk * onchip_clks[] = { /* non-ULPD clocks */ &ck_ref, @@ -790,6 +803,7 @@ static struct clk * onchip_clks[] = { /* Virtual clocks */ &virtual_ck_mpu, &i2c_fck, + &i2c_ick, }; #endif diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index fa74ef7af15f..5432335bc493 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -199,6 +199,17 @@ MUX_CFG("N14_1610_UWIRE_CS0", 8, 9, 1, 1, 21, 0, 1, 1, 1) MUX_CFG("P15_1610_UWIRE_CS3", 8, 12, 1, 1, 22, 0, 1, 1, 1) MUX_CFG("N15_1610_UWIRE_CS1", 7, 18, 2, 1, 14, 0, NA, 0, 1) +/* OMAP-1610 SPI */ +MUX_CFG("U19_1610_SPIF_SCK", 7, 21, 6, 1, 15, 0, 1, 1, 1) +MUX_CFG("U18_1610_SPIF_DIN", 8, 0, 6, 1, 18, 1, 1, 0, 1) +MUX_CFG("P20_1610_SPIF_DIN", 6, 27, 4, 1, 7, 1, 1, 0, 1) +MUX_CFG("W21_1610_SPIF_DOUT", 8, 3, 6, 1, 19, 0, 1, 0, 1) +MUX_CFG("R18_1610_SPIF_DOUT", 7, 9, 3, 1, 11, 0, 1, 0, 1) +MUX_CFG("N14_1610_SPIF_CS0", 8, 9, 6, 1, 21, 0, 1, 1, 1) +MUX_CFG("N15_1610_SPIF_CS1", 7, 18, 6, 1, 14, 0, 1, 1, 1) +MUX_CFG("T19_1610_SPIF_CS2", 7, 15, 4, 1, 13, 0, 1, 1, 1) +MUX_CFG("P15_1610_SPIF_CS3", 8, 12, 3, 1, 22, 0, 1, 1, 1) + /* OMAP-1610 Flash */ MUX_CFG("L3_1610_FLASH_CS2B_OE",10, 6, 1, NA, 0, 0, NA, 0, 1) MUX_CFG("M8_1610_FLASH_CS2B_WE",10, 3, 1, NA, 0, 0, NA, 0, 1) diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 7993b7bae2bd..2db6b732b084 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -166,8 +166,8 @@ static struct omap_uart_config apollon_uart_config __initdata = { static struct omap_mmc_config apollon_mmc_config __initdata = { .mmc [0] = { - .enabled = 0, - .wire4 = 0, + .enabled = 1, + .wire4 = 1, .wp_pin = -1, .power_pin = -1, .switch_pin = -1, @@ -257,6 +257,9 @@ static void __init omap_apollon_init(void) /* REVISIT: where's the correct place */ omap_cfg_reg(W19_24XX_SYS_NIRQ); + /* Use Interal loop-back in MMC/SDIO Module Input Clock selection */ + CONTROL_DEVCONF |= (1 << 24); + /* * Make sure the serial ports are muxed on at this point. * You have to mux them off in device drivers later on diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 4933fce766c8..996aeda1285d 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -245,6 +245,7 @@ static struct omap_kp_platform_data h4_kp_data = { .rows = 6, .cols = 7, .keymap = h4_keymap, + .keymapsize = ARRAY_SIZE(h4_keymap), .rep = 1, .row_gpios = row_gpios, .col_gpios = col_gpios, diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index d1b648a4efbf..0de201c3d50b 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -32,10 +32,14 @@ #include "memory.h" #include "clock.h" +#undef DEBUG + //#define DOWN_VARIABLE_DPLL 1 /* Experimental */ static struct prcm_config *curr_prcm_set; static u32 curr_perf_level = PRCM_FULL_SPEED; +static struct clk *vclk; +static struct clk *sclk; /*------------------------------------------------------------------------- * Omap2 specific clock functions @@ -79,6 +83,14 @@ static void omap2_propagate_rate(struct clk * clk) propagate_rate(clk); } +static void omap2_set_osc_ck(int enable) +{ + if (enable) + PRCM_CLKSRC_CTRL &= ~(0x3 << 3); + else + PRCM_CLKSRC_CTRL |= 0x3 << 3; +} + /* Enable an APLL if off */ static void omap2_clk_fixed_enable(struct clk *clk) { @@ -101,12 +113,54 @@ static void omap2_clk_fixed_enable(struct clk *clk) else if (clk == &apll54_ck) cval = (1 << 6); - while (!CM_IDLEST_CKGEN & cval) { /* Wait for lock */ + while (!(CM_IDLEST_CKGEN & cval)) { /* Wait for lock */ ++i; udelay(1); - if (i == 100000) + if (i == 100000) { + printk(KERN_ERR "Clock %s didn't lock\n", clk->name); + break; + } + } +} + +static void omap2_clk_wait_ready(struct clk *clk) +{ + unsigned long reg, other_reg, st_reg; + u32 bit; + int i; + + reg = (unsigned long) clk->enable_reg; + if (reg == (unsigned long) &CM_FCLKEN1_CORE || + reg == (unsigned long) &CM_FCLKEN2_CORE) + other_reg = (reg & ~0xf0) | 0x10; + else if (reg == (unsigned long) &CM_ICLKEN1_CORE || + reg == (unsigned long) &CM_ICLKEN2_CORE) + other_reg = (reg & ~0xf0) | 0x00; + else + return; + + /* No check for DSS or cam clocks */ + if ((reg & 0x0f) == 0) { + if (clk->enable_bit <= 1 || clk->enable_bit == 31) + return; + } + + /* Check if both functional and interface clocks + * are running. */ + bit = 1 << clk->enable_bit; + if (!(__raw_readl(other_reg) & bit)) + return; + st_reg = (other_reg & ~0xf0) | 0x20; + i = 0; + while (!(__raw_readl(st_reg) & bit)) { + i++; + if (i == 100000) { + printk(KERN_ERR "Timeout enabling clock %s\n", clk->name); break; + } } + if (i) + pr_debug("Clock %s stable after %d loops\n", clk->name, i); } /* Enables clock without considering parent dependencies or use count @@ -119,6 +173,11 @@ static int _omap2_clk_enable(struct clk * clk) if (clk->flags & ALWAYS_ENABLED) return 0; + if (unlikely(clk == &osc_ck)) { + omap2_set_osc_ck(1); + return 0; + } + if (unlikely(clk->enable_reg == 0)) { printk(KERN_ERR "clock.c: Enable for %s without enable code\n", clk->name); @@ -133,6 +192,9 @@ static int _omap2_clk_enable(struct clk * clk) regval32 = __raw_readl(clk->enable_reg); regval32 |= (1 << clk->enable_bit); __raw_writel(regval32, clk->enable_reg); + wmb(); + + omap2_clk_wait_ready(clk); return 0; } @@ -155,6 +217,11 @@ static void _omap2_clk_disable(struct clk *clk) { u32 regval32; + if (unlikely(clk == &osc_ck)) { + omap2_set_osc_ck(0); + return; + } + if (clk->enable_reg == 0) return; @@ -166,6 +233,7 @@ static void _omap2_clk_disable(struct clk *clk) regval32 = __raw_readl(clk->enable_reg); regval32 &= ~(1 << clk->enable_bit); __raw_writel(regval32, clk->enable_reg); + wmb(); } static int omap2_clk_enable(struct clk *clk) @@ -695,12 +763,14 @@ static int omap2_clk_set_rate(struct clk *clk, unsigned long rate) reg_val = __raw_readl(reg); reg_val &= ~(field_mask << div_off); reg_val |= (field_val << div_off); - __raw_writel(reg_val, reg); + wmb(); clk->rate = clk->parent->rate / field_val; - if (clk->flags & DELAYED_APP) + if (clk->flags & DELAYED_APP) { __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL); + wmb(); + } ret = 0; } else if (clk->set_rate != 0) ret = clk->set_rate(clk, rate); @@ -836,10 +906,12 @@ static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) reg_val = __raw_readl(reg) & ~(field_mask << src_off); reg_val |= (field_val << src_off); __raw_writel(reg_val, reg); + wmb(); - if (clk->flags & DELAYED_APP) + if (clk->flags & DELAYED_APP) { __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL); - + wmb(); + } if (clk->usecount > 0) _omap2_clk_enable(clk); @@ -953,12 +1025,29 @@ static int omap2_select_table_rate(struct clk * clk, unsigned long rate) * Omap2 clock reset and init functions *-------------------------------------------------------------------------*/ +#ifdef CONFIG_OMAP_RESET_CLOCKS +static void __init omap2_clk_disable_unused(struct clk *clk) +{ + u32 regval32; + + regval32 = __raw_readl(clk->enable_reg); + if ((regval32 & (1 << clk->enable_bit)) == 0) + return; + + printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name); + _omap2_clk_disable(clk); +} +#else +#define omap2_clk_disable_unused NULL +#endif + static struct clk_functions omap2_clk_functions = { .clk_enable = omap2_clk_enable, .clk_disable = omap2_clk_disable, .clk_round_rate = omap2_clk_round_rate, .clk_set_rate = omap2_clk_set_rate, .clk_set_parent = omap2_clk_set_parent, + .clk_disable_unused = omap2_clk_disable_unused, }; static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys) @@ -984,27 +1073,19 @@ static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys) sys->rate = sclk; } -#ifdef CONFIG_OMAP_RESET_CLOCKS -static void __init omap2_disable_unused_clocks(void) +/* + * Set clocks for bypass mode for reboot to work. + */ +void omap2_clk_prepare_for_reboot(void) { - struct clk *ck; - u32 regval32; + u32 rate; - list_for_each_entry(ck, &clocks, node) { - if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) || - ck->enable_reg == 0) - continue; - - regval32 = __raw_readl(ck->enable_reg); - if ((regval32 & (1 << ck->enable_bit)) == 0) - continue; + if (vclk == NULL || sclk == NULL) + return; - printk(KERN_INFO "Disabling unused clock \"%s\"\n", ck->name); - _omap2_clk_disable(ck); - } + rate = clk_get_rate(sclk); + clk_set_rate(vclk, rate); } -late_initcall(omap2_disable_unused_clocks); -#endif /* * Switch the MPU rate if specified on cmdline. @@ -1077,8 +1158,27 @@ int __init omap2_clk_init(void) */ clk_enable(&sync_32k_ick); clk_enable(&omapctrl_ick); + + /* Force the APLLs active during bootup to avoid disabling and + * enabling them unnecessarily. */ + clk_enable(&apll96_ck); + clk_enable(&apll54_ck); + if (cpu_is_omap2430()) clk_enable(&sdrc_ick); + /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ + vclk = clk_get(NULL, "virt_prcm_set"); + sclk = clk_get(NULL, "sys_ck"); + + return 0; +} + +static int __init omap2_disable_aplls(void) +{ + clk_disable(&apll96_ck); + clk_disable(&apll54_ck); + return 0; } +late_initcall(omap2_disable_aplls); diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 2781dfbc5164..8816f5a33a28 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -560,7 +560,7 @@ static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ .name = "osc_ck", .rate = 26000000, /* fixed up in clock init */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + RATE_FIXED | RATE_PROPAGATES, }; /* With out modem likely 12MHz, with modem likely 13MHz */ @@ -1368,7 +1368,8 @@ static struct clk mcbsp5_fck = { }; static struct clk mcspi1_ick = { - .name = "mcspi1_ick", + .name = "mcspi_ick", + .id = 1, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, @@ -1377,7 +1378,8 @@ static struct clk mcspi1_ick = { }; static struct clk mcspi1_fck = { - .name = "mcspi1_fck", + .name = "mcspi_fck", + .id = 1, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, @@ -1386,7 +1388,8 @@ static struct clk mcspi1_fck = { }; static struct clk mcspi2_ick = { - .name = "mcspi2_ick", + .name = "mcspi_ick", + .id = 2, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, @@ -1395,7 +1398,8 @@ static struct clk mcspi2_ick = { }; static struct clk mcspi2_fck = { - .name = "mcspi2_fck", + .name = "mcspi_fck", + .id = 2, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, @@ -1404,7 +1408,8 @@ static struct clk mcspi2_fck = { }; static struct clk mcspi3_ick = { - .name = "mcspi3_ick", + .name = "mcspi_ick", + .id = 3, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, @@ -1413,7 +1418,8 @@ static struct clk mcspi3_ick = { }; static struct clk mcspi3_fck = { - .name = "mcspi3_fck", + .name = "mcspi_fck", + .id = 3, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index c7a48f921fef..f4f04d87df32 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -13,6 +13,8 @@ #include <linux/init.h> #include <linux/err.h> #include <linux/clk.h> +#include <linux/ioport.h> +#include <linux/spinlock.h> #include <asm/io.h> #include <asm/arch/gpmc.h> @@ -41,6 +43,19 @@ #define GPMC_CS0 0x60 #define GPMC_CS_SIZE 0x30 +#define GPMC_CS_NUM 8 +#define GPMC_MEM_START 0x00000000 +#define GPMC_MEM_END 0x3FFFFFFF +#define BOOT_ROM_SPACE 0x100000 /* 1MB */ + +#define GPMC_CHUNK_SHIFT 24 /* 16 MB */ +#define GPMC_SECTION_SHIFT 28 /* 128 MB */ + +static struct resource gpmc_mem_root; +static struct resource gpmc_cs_mem[GPMC_CS_NUM]; +static spinlock_t gpmc_mem_lock = SPIN_LOCK_UNLOCKED; +static unsigned gpmc_cs_map; + static void __iomem *gpmc_base = (void __iomem *) IO_ADDRESS(GPMC_BASE); static void __iomem *gpmc_cs_base = @@ -187,9 +202,168 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) return 0; } -unsigned long gpmc_cs_get_base_addr(int cs) +static void gpmc_cs_enable_mem(int cs, u32 base, u32 size) +{ + u32 l; + u32 mask; + + mask = (1 << GPMC_SECTION_SHIFT) - size; + l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); + l &= ~0x3f; + l = (base >> GPMC_CHUNK_SHIFT) & 0x3f; + l &= ~(0x0f << 8); + l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8; + l |= 1 << 6; /* CSVALID */ + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l); +} + +static void gpmc_cs_disable_mem(int cs) +{ + u32 l; + + l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); + l &= ~(1 << 6); /* CSVALID */ + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l); +} + +static void gpmc_cs_get_memconf(int cs, u32 *base, u32 *size) +{ + u32 l; + u32 mask; + + l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); + *base = (l & 0x3f) << GPMC_CHUNK_SHIFT; + mask = (l >> 8) & 0x0f; + *size = (1 << GPMC_SECTION_SHIFT) - (mask << GPMC_CHUNK_SHIFT); +} + +static int gpmc_cs_mem_enabled(int cs) +{ + u32 l; + + l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); + return l & (1 << 6); +} + +static void gpmc_cs_set_reserved(int cs, int reserved) { - return (gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7) & 0x1f) << 24; + gpmc_cs_map &= ~(1 << cs); + gpmc_cs_map |= (reserved ? 1 : 0) << cs; +} + +static int gpmc_cs_reserved(int cs) +{ + return gpmc_cs_map & (1 << cs); +} + +static unsigned long gpmc_mem_align(unsigned long size) +{ + int order; + + size = (size - 1) >> (GPMC_CHUNK_SHIFT - 1); + order = GPMC_CHUNK_SHIFT - 1; + do { + size >>= 1; + order++; + } while (size); + size = 1 << order; + return size; +} + +static int gpmc_cs_insert_mem(int cs, unsigned long base, unsigned long size) +{ + struct resource *res = &gpmc_cs_mem[cs]; + int r; + + size = gpmc_mem_align(size); + spin_lock(&gpmc_mem_lock); + res->start = base; + res->end = base + size - 1; + r = request_resource(&gpmc_mem_root, res); + spin_unlock(&gpmc_mem_lock); + + return r; +} + +int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) +{ + struct resource *res = &gpmc_cs_mem[cs]; + int r = -1; + + if (cs > GPMC_CS_NUM) + return -ENODEV; + + size = gpmc_mem_align(size); + if (size > (1 << GPMC_SECTION_SHIFT)) + return -ENOMEM; + + spin_lock(&gpmc_mem_lock); + if (gpmc_cs_reserved(cs)) { + r = -EBUSY; + goto out; + } + if (gpmc_cs_mem_enabled(cs)) + r = adjust_resource(res, res->start & ~(size - 1), size); + if (r < 0) + r = allocate_resource(&gpmc_mem_root, res, size, 0, ~0, + size, NULL, NULL); + if (r < 0) + goto out; + + gpmc_cs_enable_mem(cs, res->start, res->end - res->start + 1); + *base = res->start; + gpmc_cs_set_reserved(cs, 1); +out: + spin_unlock(&gpmc_mem_lock); + return r; +} + +void gpmc_cs_free(int cs) +{ + spin_lock(&gpmc_mem_lock); + if (cs >= GPMC_CS_NUM || !gpmc_cs_reserved(cs)) { + printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs); + BUG(); + spin_unlock(&gpmc_mem_lock); + return; + } + gpmc_cs_disable_mem(cs); + release_resource(&gpmc_cs_mem[cs]); + gpmc_cs_set_reserved(cs, 0); + spin_unlock(&gpmc_mem_lock); +} + +void __init gpmc_mem_init(void) +{ + int cs; + unsigned long boot_rom_space = 0; + + if (cpu_is_omap242x()) { + u32 l; + l = omap_readl(OMAP242X_CONTROL_STATUS); + /* In case of internal boot the 1st MB is redirected to the + * boot ROM memory space. + */ + if (l & (1 << 3)) + boot_rom_space = BOOT_ROM_SPACE; + } else + /* We assume internal boot if the mode can't be + * determined. + */ + boot_rom_space = BOOT_ROM_SPACE; + gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space; + gpmc_mem_root.end = GPMC_MEM_END; + + /* Reserve all regions that has been set up by bootloader */ + for (cs = 0; cs < GPMC_CS_NUM; cs++) { + u32 base, size; + + if (!gpmc_cs_mem_enabled(cs)) + continue; + gpmc_cs_get_memconf(cs, &base, &size); + if (gpmc_cs_insert_mem(cs, base, size) < 0) + BUG(); + } } void __init gpmc_init(void) @@ -206,4 +380,6 @@ void __init gpmc_init(void) l &= 0x03 << 3; l |= (0x02 << 3) | (1 << 0); gpmc_write_reg(GPMC_SYSCONFIG, l); + + gpmc_mem_init(); } diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index dfc3b35cc1ff..1ed2fff4691a 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -41,18 +41,6 @@ static struct omap_irq_bank { .nr_irqs = 96, }, { /* XXX: DSP INTC */ - -#if 0 - /* - * Commented out for now until we fix the IVA clocking - */ -#ifdef CONFIG_ARCH_OMAP2420 - }, { - /* IVA INTC (2420 only) */ - .base_reg = OMAP24XX_IVA_INTC_BASE, - .nr_irqs = 16, /* Actually 32, but only 16 are used */ -#endif -#endif } }; diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 60ef084faffd..f538d0fdb13c 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -104,6 +104,20 @@ MUX_CFG_24XX("P20_24XX_TSC_IRQ", 0x108, 0, 0, 0, 1) MUX_CFG_24XX("K15_24XX_UART3_TX", 0x118, 0, 0, 0, 1) MUX_CFG_24XX("K14_24XX_UART3_RX", 0x119, 0, 0, 0, 1) +/* MMC/SDIO */ +MUX_CFG_24XX("G19_24XX_MMC_CLKO", 0x0f3, 0, 0, 0, 1) +MUX_CFG_24XX("H18_24XX_MMC_CMD", 0x0f4, 0, 0, 0, 1) +MUX_CFG_24XX("F20_24XX_MMC_DAT0", 0x0f5, 0, 0, 0, 1) +MUX_CFG_24XX("H14_24XX_MMC_DAT1", 0x0f6, 0, 0, 0, 1) +MUX_CFG_24XX("E19_24XX_MMC_DAT2", 0x0f7, 0, 0, 0, 1) +MUX_CFG_24XX("D19_24XX_MMC_DAT3", 0x0f8, 0, 0, 0, 1) +MUX_CFG_24XX("F19_24XX_MMC_DAT_DIR0", 0x0f9, 0, 0, 0, 1) +MUX_CFG_24XX("E20_24XX_MMC_DAT_DIR1", 0x0fa, 0, 0, 0, 1) +MUX_CFG_24XX("F18_24XX_MMC_DAT_DIR2", 0x0fb, 0, 0, 0, 1) +MUX_CFG_24XX("E18_24XX_MMC_DAT_DIR3", 0x0fc, 0, 0, 0, 1) +MUX_CFG_24XX("G18_24XX_MMC_CMD_DIR", 0x0fd, 0, 0, 0, 1) +MUX_CFG_24XX("H15_24XX_MMC_CLKI", 0x0fe, 0, 0, 0, 1) + /* Keypad GPIO*/ MUX_CFG_24XX("T19_24XX_KBR0", 0x106, 3, 1, 1, 1) MUX_CFG_24XX("R19_24XX_KBR1", 0x107, 3, 1, 1, 1) diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index c2bf57ef6825..90f530540c65 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -19,6 +19,8 @@ #include "prcm-regs.h" +extern void omap2_clk_prepare_for_reboot(void); + u32 omap_prcm_get_reset_sources(void) { return RM_RSTST_WKUP & 0x7f; @@ -28,12 +30,6 @@ EXPORT_SYMBOL(omap_prcm_get_reset_sources); /* Resets clock rates and reboots the system. Only called from system.h */ void omap_prcm_arch_reset(char mode) { - u32 rate; - struct clk *vclk, *sclk; - - vclk = clk_get(NULL, "virt_prcm_set"); - sclk = clk_get(NULL, "sys_ck"); - rate = clk_get_rate(sclk); - clk_set_rate(vclk, rate); /* go to bypass for OMAP limitation */ + omap2_clk_prepare_for_reboot(); RM_RSTCTRL_WKUP |= 2; } diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index bbd138be6a70..df37594c30f8 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -2,6 +2,13 @@ if ARCH_S3C2410 menu "S3C24XX Implementations" +config MACH_AML_M5900 + bool "AML M5900 Series" + select CPU_S3C2410 + help + Say Y here if you are using the American Microsystems M5900 Series + <http://www.amltd.com> + config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select CPU_S3C2440 @@ -126,6 +133,12 @@ config MACH_NEXCODER_2440 help Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board +config MACH_VSTMS + bool "VMSTMS" + select CPU_S3C2412 + help + Say Y here if you are using an VSTMS board + endmenu config S3C2410_CLOCK @@ -133,10 +146,24 @@ config S3C2410_CLOCK help Clock code for the S3C2410, and similar processors +config S3C2410_PM + bool + depends on CONFIG_PM + help + Power Management code common to S3C2410 and better + +config CPU_S3C2410_DMA + bool + depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442) + default y if CPU_S3C2410 || CPU_S3C2442 + help + DMA device selection for S3C2410 and compatible CPUs + config CPU_S3C2410 bool depends on ARCH_S3C2410 select S3C2410_CLOCK + select S3C2410_PM help Support for S3C2410 and S3C2410A family from the S3C24XX line of Samsung Mobile CPUs. @@ -149,6 +176,13 @@ config CPU_S3C2412_ONLY !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412 default y if CPU_S3C2412 +config S3C2412_PM + bool + default y if PM + depends on CPU_S3C2412 + help + Internal config node to apply S3C2412 power management + config CPU_S3C2412 bool depends on ARCH_S3C2410 @@ -165,6 +199,7 @@ config CPU_S3C2440 bool depends on ARCH_S3C2410 select S3C2410_CLOCK + select S3C2410_PM select CPU_S3C244X help Support for S3C2440 Samsung Mobile CPU based systems. @@ -173,6 +208,7 @@ config CPU_S3C2442 bool depends on ARCH_S3C2420 select S3C2410_CLOCK + select S3C2410_PM select CPU_S3C244X help Support for S3C2442 Samsung Mobile CPU based systems. @@ -256,7 +292,7 @@ config S3C2410_PM_CHECK_CHUNKSIZE config PM_SIMTEC bool - depends on PM && (ARCH_BAST || MACH_VR1000) + depends on PM && (ARCH_BAST || MACH_VR1000 || MACH_AML_M5900) default y config S3C2410_LOWLEVEL_UART_PORT diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 0eadec916214..d66013365b6b 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -9,6 +9,8 @@ obj-y := cpu.o irq.o time.o gpio.o clock.o devs.o obj-m := obj-n := obj- := +obj-dma-y := +obj-dma-n := # DMA obj-$(CONFIG_S3C2410_DMA) += dma.o @@ -20,6 +22,10 @@ obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o +obj-$(CONFIG_CPU_S3C2410) += s3c2410-irq.o + +obj-$(CONFIG_S3C2410_PM) += s3c2410-pm.o s3c2410-sleep.o +obj-$(CONFIG_CPU_S3C2410_DMA) += s3c2410-dma.o # Power Management support @@ -30,6 +36,9 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_CPU_S3C2412) += s3c2412-irq.o obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o +obj-dma-$(CONFIG_CPU_S3C2412) += s3c2412-dma.o + +obj-$(CONFIG_S3C2412_PM) += s3c2412-pm.o # # S3C244X support @@ -47,6 +56,7 @@ obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o +obj-dma-$(CONFIG_CPU_S3C2440) += s3c2440-dma.o # S3C2442 support @@ -57,8 +67,13 @@ obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o +# merge in dma objects + +obj-y += $(obj-dma-y) + # machine specific support +obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o @@ -71,5 +86,6 @@ obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o obj-$(CONFIG_MACH_OTOM) += mach-otom.o obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o +obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o obj-$(CONFIG_MACH_SMDK) += common-smdk.o
\ No newline at end of file diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index def4441d2442..440e9aa0211a 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -18,10 +18,6 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Modifications: - * 08-Jan-2003 BJD Moved from central IRQ code - * 21-Aug-2005 BJD Fixed missing code and compile errors */ diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c index 1c3c6adae6c4..9d4899eddf1f 100644 --- a/arch/arm/mach-s3c2410/cpu.c +++ b/arch/arm/mach-s3c2410/cpu.c @@ -124,6 +124,15 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s3c2412_init, .name = name_s3c2412, }, + { /* a newer version of the s3c2412 */ + .idcode = 0x32412003, + .idmask = 0xffffffff, + .map_io = s3c2412_map_io, + .init_clocks = s3c2412_init_clocks, + .init_uarts = s3c2412_init_uarts, + .init = s3c2412_init, + .name = name_s3c2412, + }, { .idcode = 0x0, /* S3C2400 doesn't have an idcode */ .idmask = 0xffffffff, diff --git a/arch/arm/mach-s3c2410/devs.h b/arch/arm/mach-s3c2410/devs.h index 726e2eaf8797..14fb0bade716 100644 --- a/arch/arm/mach-s3c2410/devs.h +++ b/arch/arm/mach-s3c2410/devs.h @@ -8,11 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 18-Aug-2004 BJD Created initial version - * 27-Aug-2004 BJD Added timers 0 through 3 - * 10-Feb-2005 BJD Added camera from guillaume.gourat@nexvision.tv */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index cc92a7b2db88..d264bbbd8bef 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -1,35 +1,16 @@ -/* linux/arch/arm/mach-bast/dma.c +/* linux/arch/arm/mach-s3c2410/dma.c * - * (c) 2003-2005 Simtec Electronics + * (c) 2003-2005,2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C2410 DMA core * - * http://www.simtec.co.uk/products/EB2410ITX/ + * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 27-Feb-2005 BJD Added kmem cache for dma descriptors - * 18-Nov-2004 BJD Removed error for loading onto stopped channel - * 10-Nov-2004 BJD Ensure all external symbols exported for modules - * 10-Nov-2004 BJD Use sys_device and sysdev_class for power management - * 08-Aug-2004 BJD Apply rmk's suggestions - * 21-Jul-2004 BJD Ported to linux 2.6 - * 12-Jul-2004 BJD Finished re-write and change of API - * 06-Jul-2004 BJD Rewrote dma code to try and cope with various problems - * 23-May-2003 BJD Created file - * 19-Aug-2003 BJD Cleanup, header fix, added URL - * - * This file is based on the Sangwook Lee/Samsung patches, re-written due - * to various ommisions from the code (such as flexible dma configuration) - * for use with the BAST system board. - * - * The re-write is pretty much complete, and should be good enough for any - * possible DMA function - */ +*/ #ifdef CONFIG_S3C2410_DMA_DEBUG @@ -55,10 +36,14 @@ #include <asm/mach/dma.h> #include <asm/arch/map.h> +#include "dma.h" + /* io map for dma */ static void __iomem *dma_base; static kmem_cache_t *dma_kmem; +struct s3c24xx_dma_selection dma_sel; + /* dma channel state information */ struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; @@ -79,7 +64,6 @@ dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val) pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg); writel(val, dma_regaddr(chan, reg)); } - #endif #define dma_rdreg(chan, reg) readl((chan)->regs + (reg)) @@ -151,12 +135,20 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan) #define dbg_showchan(chan) do { } while(0) #endif /* CONFIG_S3C2410_DMA_DEBUG */ -#define check_channel(chan) \ - do { if ((chan) >= S3C2410_DMA_CHANNELS) { \ - printk(KERN_ERR "%s: invalid channel %d\n", __FUNCTION__, (chan)); \ - return -EINVAL; \ - } } while(0) +static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX]; +/* lookup_dma_channel + * + * change the dma channel number given into a real dma channel id +*/ + +static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel) +{ + if (channel & DMACH_LOW_LEVEL) + return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL]; + else + return dma_chan_map[channel]; +} /* s3c2410_dma_stats_timeout * @@ -321,8 +313,10 @@ static inline void s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf, enum s3c2410_dma_buffresult result) { +#if 0 pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n", chan->callback_fn, buf, buf->id, buf->size, result); +#endif if (chan->callback_fn != NULL) { (chan->callback_fn)(chan, buf->id, buf->size, result); @@ -439,7 +433,6 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) return 0; } - /* s3c2410_dma_enqueue * * queue an given buffer for dma transfer. @@ -460,11 +453,12 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) int s3c2410_dma_enqueue(unsigned int channel, void *id, dma_addr_t data, int size) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); struct s3c2410_dma_buf *buf; unsigned long flags; - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: id=%p, data=%08x, size=%d\n", __FUNCTION__, id, (unsigned int)data, size); @@ -562,8 +556,10 @@ s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf) static inline void s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) { +#if 0 pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n", chan->number, chan->load_state); +#endif switch (chan->load_state) { case S3C2410_DMALOAD_NONE: @@ -718,7 +714,8 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs) if (chan->load_state == S3C2410_DMALOAD_NONE) { pr_debug("dma%d: end of transfer, stopping channel (%ld)\n", chan->number, jiffies); - s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP); + s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL, + S3C2410_DMAOP_STOP); } } @@ -726,37 +723,34 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs) return IRQ_HANDLED; } +static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel); + /* s3c2410_request_dma * * get control of an dma channel */ -int s3c2410_dma_request(unsigned int channel, struct s3c2410_dma_client *client, +int s3c2410_dma_request(unsigned int channel, + struct s3c2410_dma_client *client, void *dev) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan; unsigned long flags; int err; pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n", channel, client->name, dev); - check_channel(channel); - local_irq_save(flags); - dbg_showchan(chan); - - if (chan->in_use) { - if (client != chan->client) { - printk(KERN_ERR "dma%d: already in use\n", channel); - local_irq_restore(flags); - return -EBUSY; - } else { - printk(KERN_ERR "dma%d: client already has channel\n", channel); - } + chan = s3c2410_dma_map_channel(channel); + if (chan == NULL) { + local_irq_restore(flags); + return -EBUSY; } + dbg_showchan(chan); + chan->client = client; chan->in_use = 1; @@ -809,14 +803,14 @@ EXPORT_SYMBOL(s3c2410_dma_request); int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); unsigned long flags; - check_channel(channel); + if (chan == NULL) + return -EINVAL; local_irq_save(flags); - if (chan->client != client) { printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n", channel, chan->client, client); @@ -837,8 +831,12 @@ int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client) if (chan->irq_claimed) free_irq(chan->irq, (void *)chan); + chan->irq_claimed = 0; + if (!(channel & DMACH_LOW_LEVEL)) + dma_chan_map[channel] = NULL; + local_irq_restore(flags); return 0; @@ -848,8 +846,8 @@ EXPORT_SYMBOL(s3c2410_dma_free); static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan) { - unsigned long tmp; unsigned long flags; + unsigned long tmp; pr_debug("%s:\n", __FUNCTION__); @@ -997,9 +995,10 @@ s3c2410_dma_started(struct s3c2410_dma_chan *chan) int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; switch (op) { case S3C2410_DMAOP_START: @@ -1046,12 +1045,19 @@ int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", __FUNCTION__, channel, xferunit, dcon); - check_channel(channel); + if (chan == NULL) + return -EINVAL; + + printk("Initial dcon is %08x\n", dcon); + + dcon |= chan->dcon & dma_sel.dcon_mask; + + printk("New dcon is %08x\n", dcon); switch (xferunit) { case 1: @@ -1086,9 +1092,10 @@ EXPORT_SYMBOL(s3c2410_dma_config); int s3c2410_dma_setflags(dmach_t channel, unsigned int flags) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags); @@ -1106,9 +1113,10 @@ EXPORT_SYMBOL(s3c2410_dma_setflags); int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn); @@ -1121,9 +1129,10 @@ EXPORT_SYMBOL(s3c2410_dma_set_opfn); int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn); @@ -1153,9 +1162,10 @@ int s3c2410_dma_devconfig(int channel, int hwcfg, unsigned long devaddr) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n", __FUNCTION__, (int)source, hwcfg, devaddr); @@ -1200,9 +1210,10 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig); int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; if (src != NULL) *src = dma_rdreg(chan, S3C2410_DMA_DCSRC); @@ -1252,7 +1263,7 @@ static int s3c2410_dma_resume(struct sys_device *dev) #define s3c2410_dma_resume NULL #endif /* CONFIG_PM */ -static struct sysdev_class dma_sysclass = { +struct sysdev_class dma_sysclass = { set_kset_name("s3c24xx-dma"), .suspend = s3c2410_dma_suspend, .resume = s3c2410_dma_resume, @@ -1265,7 +1276,6 @@ static void s3c2410_dma_cache_ctor(void *p, kmem_cache_t *c, unsigned long f) memset(p, 0, sizeof(struct s3c2410_dma_buf)); } - /* initialisation code */ static int __init s3c2410_init_dma(void) @@ -1274,7 +1284,7 @@ static int __init s3c2410_init_dma(void) int channel; int ret; - printk("S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics\n"); + printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n"); dma_base = ioremap(S3C24XX_PA_DMA, 0x200); if (dma_base == NULL) { @@ -1282,6 +1292,8 @@ static int __init s3c2410_init_dma(void) return -ENOMEM; } + printk("Registering sysclass\n"); + ret = sysdev_class_register(&dma_sysclass); if (ret != 0) { printk(KERN_ERR "dma sysclass registration failed\n"); @@ -1335,4 +1347,95 @@ static int __init s3c2410_init_dma(void) return ret; } -__initcall(s3c2410_init_dma); +core_initcall(s3c2410_init_dma); + +static inline int is_channel_valid(unsigned int channel) +{ + return (channel & DMA_CH_VALID); +} + +/* s3c2410_dma_map_channel() + * + * turn the virtual channel number into a real, and un-used hardware + * channel. + * + * currently this code uses first-free channel from the specified harware + * map, not taking into account anything that the board setup code may + * have to say about the likely peripheral set to be in use. +*/ + +struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel) +{ + struct s3c24xx_dma_map *ch_map; + struct s3c2410_dma_chan *dmach; + int ch; + + if (dma_sel.map == NULL || channel > dma_sel.map_size) + return NULL; + + ch_map = dma_sel.map + channel; + + for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) { + if (!is_channel_valid(ch_map->channels[ch])) + continue; + + if (s3c2410_chans[ch].in_use == 0) { + printk("mapped channel %d to %d\n", channel, ch); + break; + } + } + + if (ch >= S3C2410_DMA_CHANNELS) + return NULL; + + /* update our channel mapping */ + + dmach = &s3c2410_chans[ch]; + dma_chan_map[channel] = dmach; + + /* select the channel */ + + (dma_sel.select)(dmach, ch_map); + + return dmach; +} + +static void s3c24xx_dma_show_ch(struct s3c24xx_dma_map *map, int ch) +{ + /* show the channel configuration */ + + printk("%2d: %20s, channels %c%c%c%c\n", ch, map->name, + (is_channel_valid(map->channels[0]) ? '0' : '-'), + (is_channel_valid(map->channels[1]) ? '1' : '-'), + (is_channel_valid(map->channels[2]) ? '2' : '-'), + (is_channel_valid(map->channels[3]) ? '3' : '-')); +} + +static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch) +{ + if (1) + s3c24xx_dma_show_ch(map, ch); + + return 0; +} + +int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel) +{ + struct s3c24xx_dma_map *nmap; + size_t map_sz = sizeof(*nmap) * sel->map_size; + int ptr; + + nmap = kmalloc(map_sz, GFP_KERNEL); + if (nmap == NULL) + return -ENOMEM; + + memcpy(nmap, sel->map, map_sz); + memcpy(&dma_sel, sel, sizeof(*sel)); + + dma_sel.map = nmap; + + for (ptr = 0; ptr < sel->map_size; ptr++) + s3c24xx_dma_check_entry(nmap+ptr, ptr); + + return 0; +} diff --git a/arch/arm/mach-s3c2410/dma.h b/arch/arm/mach-s3c2410/dma.h new file mode 100644 index 000000000000..0ebfe0aab80b --- /dev/null +++ b/arch/arm/mach-s3c2410/dma.h @@ -0,0 +1,45 @@ +/* arch/arm/mach-s3c2410/dma.h + * + * Copyright (C) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Samsung S3C24XX DMA support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern struct sysdev_class dma_sysclass; +extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; + +#define DMA_CH_VALID (1<<31) + +struct s3c24xx_dma_addr { + unsigned long from; + unsigned long to; +}; + +/* struct s3c24xx_dma_map + * + * this holds the mapping information for the channel selected + * to be connected to the specified device +*/ + +struct s3c24xx_dma_map { + const char *name; + struct s3c24xx_dma_addr hw_addr; + + unsigned long channels[S3C2410_DMA_CHANNELS]; +}; + +struct s3c24xx_dma_selection { + struct s3c24xx_dma_map *map; + unsigned long map_size; + unsigned long dcon_mask; + + void (*select)(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map); +}; + +extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index cd39e8684584..db6393c99860 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -18,21 +18,7 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Changelog - * 13-Sep-2004 BJD Implemented change of MISCCR - * 14-Sep-2004 BJD Added getpin call - * 14-Sep-2004 BJD Fixed bug in setpin() call - * 30-Sep-2004 BJD Fixed cfgpin() mask bug - * 01-Oct-2004 BJD Added getcfg() to get pin configuration - * 01-Oct-2004 BJD Fixed mask bug in pullup() call - * 01-Oct-2004 BJD Added getirq() to turn pin into irqno - * 04-Oct-2004 BJD Added irq filter controls for GPIO - * 05-Nov-2004 BJD EXPORT_SYMBOL() added for all code - * 13-Mar-2005 BJD Updates for __iomem - * 26-Oct-2005 BJD Added generic configuration types - * 15-Jan-2006 LCVR Added support for the S3C2400 - */ +*/ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index cd6139b35999..3e9f3462c61b 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -181,17 +181,19 @@ s3c_irq_unmask(unsigned int irqno) } struct irqchip s3c_irq_level_chip = { - .ack = s3c_irq_maskack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake + .name = "s3c-level", + .ack = s3c_irq_maskack, + .mask = s3c_irq_mask, + .unmask = s3c_irq_unmask, + .set_wake = s3c_irq_wake }; static struct irqchip s3c_irq_chip = { - .ack = s3c_irq_ack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake + .name = "s3c", + .ack = s3c_irq_ack, + .mask = s3c_irq_mask, + .unmask = s3c_irq_unmask, + .set_wake = s3c_irq_wake }; static void @@ -343,19 +345,21 @@ s3c_irqext_type(unsigned int irq, unsigned int type) } static struct irqchip s3c_irqext_chip = { - .mask = s3c_irqext_mask, - .unmask = s3c_irqext_unmask, - .ack = s3c_irqext_ack, - .set_type = s3c_irqext_type, - .set_wake = s3c_irqext_wake + .name = "s3c-ext", + .mask = s3c_irqext_mask, + .unmask = s3c_irqext_unmask, + .ack = s3c_irqext_ack, + .set_type = s3c_irqext_type, + .set_wake = s3c_irqext_wake }; static struct irqchip s3c_irq_eint0t4 = { - .ack = s3c_irq_ack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake, - .set_type = s3c_irqext_type, + .name = "s3c-ext0", + .ack = s3c_irq_ack, + .mask = s3c_irq_mask, + .unmask = s3c_irq_unmask, + .set_wake = s3c_irq_wake, + .set_type = s3c_irqext_type, }; /* mask values for the parent registers for each of the interrupt types */ @@ -387,9 +391,10 @@ s3c_irq_uart0_ack(unsigned int irqno) } static struct irqchip s3c_irq_uart0 = { - .mask = s3c_irq_uart0_mask, - .unmask = s3c_irq_uart0_unmask, - .ack = s3c_irq_uart0_ack, + .name = "s3c-uart0", + .mask = s3c_irq_uart0_mask, + .unmask = s3c_irq_uart0_unmask, + .ack = s3c_irq_uart0_ack, }; /* UART1 */ @@ -413,9 +418,10 @@ s3c_irq_uart1_ack(unsigned int irqno) } static struct irqchip s3c_irq_uart1 = { - .mask = s3c_irq_uart1_mask, - .unmask = s3c_irq_uart1_unmask, - .ack = s3c_irq_uart1_ack, + .name = "s3c-uart1", + .mask = s3c_irq_uart1_mask, + .unmask = s3c_irq_uart1_unmask, + .ack = s3c_irq_uart1_ack, }; /* UART2 */ @@ -439,9 +445,10 @@ s3c_irq_uart2_ack(unsigned int irqno) } static struct irqchip s3c_irq_uart2 = { - .mask = s3c_irq_uart2_mask, - .unmask = s3c_irq_uart2_unmask, - .ack = s3c_irq_uart2_ack, + .name = "s3c-uart2", + .mask = s3c_irq_uart2_mask, + .unmask = s3c_irq_uart2_unmask, + .ack = s3c_irq_uart2_ack, }; /* ADC and Touchscreen */ @@ -465,9 +472,10 @@ s3c_irq_adc_ack(unsigned int irqno) } static struct irqchip s3c_irq_adc = { - .mask = s3c_irq_adc_mask, - .unmask = s3c_irq_adc_unmask, - .ack = s3c_irq_adc_ack, + .name = "s3c-adc", + .mask = s3c_irq_adc_mask, + .unmask = s3c_irq_adc_unmask, + .ack = s3c_irq_adc_ack, }; /* irq demux for adc */ @@ -569,23 +577,104 @@ s3c_irq_demux_uart2(unsigned int irq, } static void -s3c_irq_demux_extint(unsigned int irq, - struct irqdesc *desc, - struct pt_regs *regs) +s3c_irq_demux_extint8(unsigned int irq, + struct irqdesc *desc, + struct pt_regs *regs) { unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); eintpnd &= ~eintmsk; + eintpnd &= ~0xff; /* ignore lower irqs */ - if (eintpnd) { - irq = fls(eintpnd); - irq += (IRQ_EINT4 - (4 + 1)); + /* we may as well handle all the pending IRQs here */ + while (eintpnd) { + irq = __ffs(eintpnd); + eintpnd &= ~(1<<irq); + + irq += (IRQ_EINT4 - 4); desc_handle_irq(irq, irq_desc + irq, regs); } + +} + +static void +s3c_irq_demux_extint4t7(unsigned int irq, + struct irqdesc *desc, + struct pt_regs *regs) +{ + unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); + unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); + + eintpnd &= ~eintmsk; + eintpnd &= 0xff; /* only lower irqs */ + + /* we may as well handle all the pending IRQs here */ + + while (eintpnd) { + irq = __ffs(eintpnd); + eintpnd &= ~(1<<irq); + + irq += (IRQ_EINT4 - 4); + + desc_handle_irq(irq, irq_desc + irq, regs); + } +} + +#ifdef CONFIG_PM + +static struct sleep_save irq_save[] = { + SAVE_ITEM(S3C2410_INTMSK), + SAVE_ITEM(S3C2410_INTSUBMSK), +}; + +/* the extint values move between the s3c2410/s3c2440 and the s3c2412 + * so we use an array to hold them, and to calculate the address of + * the register at run-time +*/ + +static unsigned long save_extint[3]; +static unsigned long save_eintflt[4]; +static unsigned long save_eintmask; + +int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(save_extint); i++) + save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4)); + + for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) + save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4)); + + s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); + save_eintmask = __raw_readl(S3C24XX_EINTMASK); + + return 0; } +int s3c24xx_irq_resume(struct sys_device *dev) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(save_extint); i++) + __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4)); + + for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) + __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4)); + + s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); + __raw_writel(save_eintmask, S3C24XX_EINTMASK); + + return 0; +} + +#else +#define s3c24xx_irq_suspend NULL +#define s3c24xx_irq_resume NULL +#endif + /* s3c24xx_init_irq * * Initialise S3C2410 IRQ system @@ -674,8 +763,8 @@ void __init s3c24xx_init_irq(void) /* setup the cascade irq handlers */ - set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint); - set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint); + set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7); + set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8); set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0); set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1); diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c new file mode 100644 index 000000000000..ba5109af40b4 --- /dev/null +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -0,0 +1,266 @@ +/*********************************************************************** + * + * linux/arch/arm/mach-s3c2410/mach-amlm5900.c + * + * Copyright (c) 2006 American Microsystems Limited + * David Anders <danders@amltd.com> + + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * @History: + * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by + * Ben Dooks <ben@simtec.co.uk> + * + ***********************************************************************/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/proc_fs.h> + + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/flash.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/arch/fb.h> + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/regs-gpio.h> + +#include "devs.h" +#include "cpu.h" + +#ifdef CONFIG_MTD_PARTITIONS + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/map.h> +#include <linux/mtd/physmap.h> + +static struct resource amlm5900_nor_resource = { + .start = 0x00000000, + .end = 0x01000000 - 1, + .flags = IORESOURCE_MEM, +}; + + + +static struct mtd_partition amlm5900_mtd_partitions[] = { + { + .name = "System", + .size = 0x240000, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + .name = "Kernel", + .size = 0x100000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "Ramdisk", + .size = 0x300000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "JFFS2", + .size = 0x9A0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "Settings", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data amlm5900_flash_data = { + .width = 2, + .parts = amlm5900_mtd_partitions, + .nr_parts = ARRAY_SIZE(amlm5900_mtd_partitions), +}; + +static struct platform_device amlm5900_device_nor = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &amlm5900_flash_data, + }, + .num_resources = 1, + .resource = &amlm5900_nor_resource, +}; +#endif + +static struct map_desc amlm5900_iodesc[] __initdata = { + { + .virtual = (u32)S3C24XX_VA_SPI, + .pfn = __phys_to_pfn(S3C2410_PA_SPI), + .length = SZ_1M, + .type = MT_DEVICE + } +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg amlm5900_uartcfgs[] = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + } +}; + + +static struct platform_device *amlm5900_devices[] __initdata = { +#ifdef CONFIG_FB_S3C2410 + &s3c_device_lcd, +#endif + &s3c_device_adc, + &s3c_device_wdt, + &s3c_device_i2c, + &s3c_device_usb, + &s3c_device_rtc, + &s3c_device_usbgadget, + &s3c_device_sdi, +#ifdef CONFIG_MTD_PARTITIONS + &amlm5900_device_nor, +#endif +}; + +static struct s3c24xx_board amlm5900_board __initdata = { + .devices = amlm5900_devices, + .devices_count = ARRAY_SIZE(amlm5900_devices) +}; + +void __init amlm5900_map_io(void) +{ + s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc)); + s3c24xx_init_clocks(0); + s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs)); + s3c24xx_set_board(&amlm5900_board); +} + +#ifdef CONFIG_FB_S3C2410 +static struct s3c2410fb_mach_info __initdata amlm5900_lcd_info = { + .width = 160, + .height = 160, + +/* commented out until stn patch is submitted +* .type = S3C2410_LCDCON1_STN4, +*/ + .gpccon = 0xaaaaaaaa, + .gpccon_mask = 0xffffffff, + .gpcup = 0x0000ffff, + .gpcup_mask = 0xffffffff, + + .gpdcon = 0xaaaaaaaa, + .gpdcon_mask = 0xffffffff, + .gpdup = 0x0000ffff, + .gpdup_mask = 0xffffffff, + + .xres = { + .min = 160, + .max = 160, + .defval = 160, + }, + + .yres = { + .min = 160, + .max = 160, + .defval = 160, + }, + + .bpp = { + .min = 4, + .max = 4, + .defval = 4, + }, + + .regs = { + .lcdcon1 = 0x00008225, + .lcdcon2 = 0x0027c000, + .lcdcon3 = 0x00182708, + .lcdcon4 = 0x00000002, + .lcdcon5 = 0x00000001, + } +}; +#endif + +static irqreturn_t +amlm5900_wake_interrupt(int irq, void *ignored, struct pt_regs *regs) +{ + return IRQ_HANDLED; +} + +static void amlm5900_init_pm(void) +{ + int ret = 0; + + ret = request_irq(IRQ_EINT9, &amlm5900_wake_interrupt, + IRQF_TRIGGER_RISING | IRQF_SHARED, + "amlm5900_wakeup", &amlm5900_wake_interrupt); + if (ret != 0) { + printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret); + } else { + enable_irq_wake(IRQ_EINT9); + /* configure the suspend/resume status pin */ + s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); + s3c2410_gpio_pullup(S3C2410_GPF2, 0); + } +} +static void __init amlm5900_init(void) +{ + amlm5900_init_pm(); +#ifdef CONFIG_FB_S3C2410 + s3c24xx_fb_set_platdata(&amlm5900_lcd_info); +#endif +} + +MACHINE_START(AML_M5900, "AML_M5900") + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = amlm5900_map_io, + .init_irq = s3c24xx_init_irq, + .init_machine = amlm5900_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c index 60641d452db3..e94cdcd96591 100644 --- a/arch/arm/mach-s3c2410/mach-anubis.c +++ b/arch/arm/mach-s3c2410/mach-anubis.c @@ -4,15 +4,9 @@ * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * - * - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 02-May-2005 BJD Copied from mach-bast.c - * 20-Sep-2005 BJD Added static to non-exported items */ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c index d661c6b7ff56..e2205ff1b0ee 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ b/arch/arm/mach-s3c2410/mach-smdk2440.c @@ -11,15 +11,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Modifications: - * 01-Nov-2004 BJD Initial version - * 12-Nov-2004 BJD Updated for release - * 04-Jan-2005 BJD Fixes for pre-release - * 22-Feb-2005 BJD Updated for 2.6.11-rc5 relesa - * 10-Mar-2005 LCVR Replaced S3C2410_VA by S3C24XX_VA - * 14-Mar-2005 BJD void __iomem fixes - * 20-Sep-2005 BJD Added static to non-exported items - * 26-Oct-2005 BJD Added framebuffer data */ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/mach-vstms.c b/arch/arm/mach-s3c2410/mach-vstms.c new file mode 100644 index 000000000000..ea554e7c006e --- /dev/null +++ b/arch/arm/mach-s3c2410/mach-vstms.c @@ -0,0 +1,168 @@ +/* linux/arch/arm/mach-s3c2410/mach-vstms.c + * + * (C) 2006 Thomas Gleixner <tglx@linutronix.de> + * + * Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/hardware.h> +#include <asm/hardware/iomd.h> +#include <asm/setup.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-lcd.h> + +#include <asm/arch/idle.h> +#include <asm/arch/fb.h> + +#include <asm/arch/nand.h> + +#include "s3c2410.h" +#include "s3c2412.h" +#include "clock.h" +#include "devs.h" +#include "cpu.h" + + +static struct map_desc vstms_iodesc[] __initdata = { +}; + +static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + } +}; + +static struct mtd_partition vstms_nand_part[] = { + [0] = { + .name = "Boot Agent", + .size = 0x7C000, + .offset = 0, + }, + [1] = { + .name = "UBoot Config", + .offset = 0x7C000, + .size = 0x4000, + }, + [2] = { + .name = "Kernel", + .offset = 0x80000, + .size = 0x200000, + }, + [3] = { + .name = "RFS", + .offset = 0x280000, + .size = 0x3d80000, + }, +}; + +static struct s3c2410_nand_set vstms_nand_sets[] = { + [0] = { + .name = "NAND", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(vstms_nand_part), + .partitions = vstms_nand_part, + }, +}; + +/* choose a set of timings which should suit most 512Mbit + * chips and beyond. +*/ + +static struct s3c2410_platform_nand vstms_nand_info = { + .tacls = 20, + .twrph0 = 60, + .twrph1 = 20, + .nr_sets = ARRAY_SIZE(vstms_nand_sets), + .sets = vstms_nand_sets, +}; + +static struct platform_device *vstms_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_wdt, + &s3c_device_i2c, + &s3c_device_iis, + &s3c_device_rtc, + &s3c_device_nand, +}; + +static struct s3c24xx_board vstms_board __initdata = { + .devices = vstms_devices, + .devices_count = ARRAY_SIZE(vstms_devices) +}; + +static void __init vstms_fixup(struct machine_desc *desc, + struct tag *tags, char **cmdline, + struct meminfo *mi) +{ + if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { + mi->nr_banks=1; + mi->bank[0].start = 0x30000000; + mi->bank[0].size = SZ_64M; + mi->bank[0].node = 0; + } +} + +static void __init vstms_map_io(void) +{ + s3c_device_nand.dev.platform_data = &vstms_nand_info; + + s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); + s3c24xx_set_board(&vstms_board); +} + +MACHINE_START(VSTMS, "VSTMS") + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + + .fixup = vstms_fixup, + .init_irq = s3c24xx_init_irq, + .map_io = vstms_map_io, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c index 7b244566a436..42cd05e298f8 100644 --- a/arch/arm/mach-s3c2410/pm-simtec.c +++ b/arch/arm/mach-s3c2410/pm-simtec.c @@ -49,7 +49,8 @@ static __init int pm_simtec_init(void) /* check which machine we are running on */ if (!machine_is_bast() && !machine_is_vr1000() && - !machine_is_anubis() && !machine_is_osiris()) + !machine_is_anubis() && !machine_is_osiris() && + !machine_is_aml_m5900()) return 0; printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n"); diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index a589fe76d915..b49a0b3b72b3 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -1,9 +1,9 @@ /* linux/arch/arm/mach-s3c2410/pm.c * - * Copyright (c) 2004 Simtec Electronics + * Copyright (c) 2004,2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C2410 Power Manager (Suspend-To-RAM) support + * S3C24XX Power Manager (Suspend-To-RAM) support * * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information * @@ -24,9 +24,6 @@ * Parts based on arch/arm/mach-pxa/pm.c * * Thanks to Dimitry Andric for debugging - * - * Modifications: - * 10-Mar-2005 LCVR Changed S3C2410_VA_UART to S3C24XX_VA_UART */ #include <linux/init.h> @@ -38,6 +35,7 @@ #include <linux/ioport.h> #include <linux/delay.h> +#include <asm/cacheflush.h> #include <asm/hardware.h> #include <asm/io.h> @@ -55,14 +53,6 @@ unsigned long s3c_pm_flags; -/* cache functions from arch/arm/mm/proc-arm920.S */ - -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH -extern void arm920_flush_kern_cache_all(void); -#else -static void arm920_flush_kern_cache_all(void) { } -#endif - #define PFX "s3c24xx-pm: " static struct sleep_save core_save[] = { @@ -92,19 +82,6 @@ static struct sleep_save core_save[] = { SAVE_ITEM(S3C2410_REFRESH), }; -/* this lot should be really saved by the IRQ code */ -static struct sleep_save irq_save[] = { - SAVE_ITEM(S3C2410_EXTINT0), - SAVE_ITEM(S3C2410_EXTINT1), - SAVE_ITEM(S3C2410_EXTINT2), - SAVE_ITEM(S3C2410_EINFLT0), - SAVE_ITEM(S3C2410_EINFLT1), - SAVE_ITEM(S3C2410_EINFLT2), - SAVE_ITEM(S3C2410_EINFLT3), - SAVE_ITEM(S3C2410_EINTMASK), - SAVE_ITEM(S3C2410_INTMSK) -}; - static struct sleep_save gpio_save[] = { SAVE_ITEM(S3C2410_GPACON), SAVE_ITEM(S3C2410_GPADAT), @@ -165,7 +142,7 @@ static struct sleep_save uart_save[] = { extern void printascii(const char *); -static void pm_dbg(const char *fmt, ...) +void pm_dbg(const char *fmt, ...) { va_list va; char buff[256]; @@ -509,6 +486,9 @@ static void s3c2410_pm_configure_extint(void) } } +void (*pm_cpu_prep)(void); +void (*pm_cpu_sleep)(void); + #define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) /* s3c2410_pm_enter @@ -519,7 +499,6 @@ static void s3c2410_pm_configure_extint(void) static int s3c2410_pm_enter(suspend_state_t state) { unsigned long regs_save[16]; - unsigned long tmp; /* ensure the debug is initialised (if enabled) */ @@ -527,6 +506,11 @@ static int s3c2410_pm_enter(suspend_state_t state) DBG("s3c2410_pm_enter(%d)\n", state); + if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) { + printk(KERN_ERR PFX "error: no cpu sleep functions set\n"); + return -EINVAL; + } + if (state != PM_SUSPEND_MEM) { printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n"); return -EINVAL; @@ -554,17 +538,9 @@ static int s3c2410_pm_enter(suspend_state_t state) DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys); - /* ensure at least GESTATUS3 has the resume address */ - - __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3); - - DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); - DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); - /* save all necessary core registers not covered by the drivers */ s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save)); - s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save)); s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); @@ -581,10 +557,16 @@ static int s3c2410_pm_enter(suspend_state_t state) /* ack any outstanding external interrupts before we go to sleep */ __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND); + __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); + __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); + + /* call cpu specific preperation */ + + pm_cpu_prep(); /* flush cache back to ram */ - arm920_flush_kern_cache_all(); + flush_cache_all(); s3c2410_pm_check_store(); @@ -592,23 +574,23 @@ static int s3c2410_pm_enter(suspend_state_t state) __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ - s3c2410_cpu_suspend(regs_save); + /* s3c2410_cpu_save will also act as our return point from when + * we resume as it saves its own register state, so use the return + * code to differentiate return from save and return from sleep */ + + if (s3c2410_cpu_save(regs_save) == 0) { + flush_cache_all(); + pm_cpu_sleep(); + } /* restore the cpu state */ cpu_init(); - /* unset the return-from-sleep flag, to ensure reset */ - - tmp = __raw_readl(S3C2410_GSTATUS2); - tmp &= S3C2410_GSTATUS2_OFFRESET; - __raw_writel(tmp, S3C2410_GSTATUS2); - /* restore the system state */ s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save)); - s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save)); s3c2410_pm_debug_init(); diff --git a/arch/arm/mach-s3c2410/pm.h b/arch/arm/mach-s3c2410/pm.h index 7a5e714c7386..ffe197a119fb 100644 --- a/arch/arm/mach-s3c2410/pm.h +++ b/arch/arm/mach-s3c2410/pm.h @@ -34,13 +34,19 @@ extern unsigned long s3c_irqwake_eintmask; extern unsigned long s3c_irqwake_intallow; extern unsigned long s3c_irqwake_eintallow; +/* per-cpu sleep functions */ + +extern void (*pm_cpu_prep)(void); +extern void (*pm_cpu_sleep)(void); + /* Flags for PM Control */ extern unsigned long s3c_pm_flags; /* from sleep.S */ -extern void s3c2410_cpu_suspend(unsigned long *saveblk); +extern int s3c2410_cpu_save(unsigned long *saveblk); +extern void s3c2410_cpu_suspend(void); extern void s3c2410_cpu_resume(void); extern unsigned long s3c2410_sleep_save_phys; @@ -57,3 +63,11 @@ struct sleep_save { extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count); extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count); + +#ifdef CONFIG_PM +extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state); +extern int s3c24xx_irq_resume(struct sys_device *dev); +#else +#define s3c24xx_irq_suspend NULL +#define s3c24xx_irq_resume NULL +#endif diff --git a/arch/arm/mach-s3c2410/s3c2410-dma.c b/arch/arm/mach-s3c2410/s3c2410-dma.c new file mode 100644 index 000000000000..51e5098b32e8 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2410-dma.c @@ -0,0 +1,158 @@ +/* linux/arch/arm/mach-s3c2410/s3c2410-dma.c + * + * (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 DMA selection + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sysdev.h> + +#include <asm/dma.h> +#include <asm/arch/dma.h> +#include "dma.h" + +#include "cpu.h" + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-ac97.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/regs-sdi.h> +#include <asm/arch/regs-iis.h> +#include <asm/arch/regs-spi.h> + +static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { + [DMACH_XD0] = { + .name = "xdreq0", + .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, + }, + [DMACH_XD1] = { + .name = "xdreq1", + .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, + }, + [DMACH_SDI] = { + .name = "sdi", + .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_SPI0] = { + .name = "spi0", + .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, + }, + [DMACH_SPI1] = { + .name = "spi1", + .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, + }, + [DMACH_UART0] = { + .name = "uart0", + .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1] = { + .name = "uart1", + .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2] = { + .name = "uart2", + .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_TIMER] = { + .name = "timer", + .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, + }, + [DMACH_I2S_IN] = { + .name = "i2s-sdi", + .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_I2S_OUT] = { + .name = "i2s-sdo", + .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_USB_EP1] = { + .name = "usb-ep1", + .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, + }, + [DMACH_USB_EP2] = { + .name = "usb-ep2", + .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, + }, + [DMACH_USB_EP3] = { + .name = "usb-ep3", + .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, + }, + [DMACH_USB_EP4] = { + .name = "usb-ep4", + .channels[3] =S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, + }, +}; + +static void s3c2410_dma_select(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map) +{ + chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; +} + +static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = { + .select = s3c2410_dma_select, + .dcon_mask = 7 << 24, + .map = s3c2410_dma_mappings, + .map_size = ARRAY_SIZE(s3c2410_dma_mappings), +}; + +static int s3c2410_dma_add(struct sys_device *sysdev) +{ + return s3c24xx_dma_init_map(&s3c2410_dma_sel); +} + +static struct sysdev_driver s3c2410_dma_driver = { + .add = s3c2410_dma_add, +}; + +static int __init s3c2410_dma_init(void) +{ + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver); +} + +arch_initcall(s3c2410_dma_init); + +/* S3C2442 DMA contains the same selection table as the S3C2410 */ + +static struct sysdev_driver s3c2442_dma_driver = { + .add = s3c2410_dma_add, +}; + +static int __init s3c2442_dma_init(void) +{ + return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver); +} + +arch_initcall(s3c2442_dma_init); + + diff --git a/arch/arm/mach-s3c2410/s3c2410-irq.c b/arch/arm/mach-s3c2410/s3c2410-irq.c new file mode 100644 index 000000000000..c796c9c76e78 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2410-irq.c @@ -0,0 +1,48 @@ +/* linux/arch/arm/mach-s3c2410/s3c2410-irq.c + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/ptrace.h> +#include <linux/sysdev.h> + +#include "cpu.h" +#include "pm.h" + +static int s3c2410_irq_add(struct sys_device *sysdev) +{ + return 0; +} + +static struct sysdev_driver s3c2410_irq_driver = { + .add = s3c2410_irq_add, + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, +}; + +static int s3c2410_irq_init(void) +{ + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver); +} + +arch_initcall(s3c2410_irq_init); diff --git a/arch/arm/mach-s3c2410/s3c2410-pm.c b/arch/arm/mach-s3c2410/s3c2410-pm.c new file mode 100644 index 000000000000..e51d76669512 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2410-pm.c @@ -0,0 +1,120 @@ +/* linux/arch/arm/mach-s3c2410/s3c2410-pm.c + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/errno.h> +#include <linux/time.h> +#include <linux/sysdev.h> + +#include <asm/hardware.h> +#include <asm/io.h> + +#include <asm/mach-types.h> + +#include <asm/arch/regs-gpio.h> + +#include "cpu.h" +#include "pm.h" + +#ifdef CONFIG_S3C2410_PM_DEBUG +extern void pm_dbg(const char *fmt, ...); +#define DBG(fmt...) pm_dbg(fmt) +#else +#define DBG(fmt...) printk(KERN_DEBUG fmt) +#endif + +static void s3c2410_pm_prepare(void) +{ + /* ensure at least GSTATUS3 has the resume address */ + + __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3); + + DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); + DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); + + if ( machine_is_aml_m5900() ) + s3c2410_gpio_setpin(S3C2410_GPF2, 1); + +} + +int s3c2410_pm_resume(struct sys_device *dev) +{ + unsigned long tmp; + + /* unset the return-from-sleep flag, to ensure reset */ + + tmp = __raw_readl(S3C2410_GSTATUS2); + tmp &= S3C2410_GSTATUS2_OFFRESET; + __raw_writel(tmp, S3C2410_GSTATUS2); + + if ( machine_is_aml_m5900() ) + s3c2410_gpio_setpin(S3C2410_GPF2, 0); + + return 0; +} + +static int s3c2410_pm_add(struct sys_device *dev) +{ + pm_cpu_prep = s3c2410_pm_prepare; + pm_cpu_sleep = s3c2410_cpu_suspend; + + return 0; +} + +static struct sysdev_driver s3c2410_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, +}; + +/* register ourselves */ + +static int __init s3c2410_pm_drvinit(void) +{ + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver); +} + +arch_initcall(s3c2410_pm_drvinit); + +static struct sysdev_driver s3c2440_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, +}; + +static int __init s3c2440_pm_drvinit(void) +{ + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver); +} + +arch_initcall(s3c2440_pm_drvinit); + +static struct sysdev_driver s3c2442_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, +}; + +static int __init s3c2442_pm_drvinit(void) +{ + return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver); +} + +arch_initcall(s3c2442_pm_drvinit); diff --git a/arch/arm/mach-s3c2410/s3c2410-sleep.S b/arch/arm/mach-s3c2410/s3c2410-sleep.S new file mode 100644 index 000000000000..9179a1024588 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2410-sleep.S @@ -0,0 +1,68 @@ +/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 Power Manager (Suspend-To-RAM) support + * + * Based on PXA/SA1100 sleep code by: + * Nicolas Pitre, (c) 2002 Monta Vista Software Inc + * Cliff Brake, (c) 2001 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/hardware.h> +#include <asm/arch/map.h> + +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-clock.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-serial.h> + + /* s3c2410_cpu_suspend + * + * put the cpu into sleep mode + */ + +ENTRY(s3c2410_cpu_suspend) + @@ prepare cpu to sleep + + ldr r4, =S3C2410_REFRESH + ldr r5, =S3C24XX_MISCCR + ldr r6, =S3C2410_CLKCON + ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB) + ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB) + ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB) + + orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command + orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals + orr r9, r9, #S3C2410_CLKCON_POWER @ power down command + + teq pc, #0 @ first as a trial-run to load cache + bl s3c2410_do_sleep + teq r0, r0 @ now do it for real + b s3c2410_do_sleep @ + + @@ align next bit of code to cache line + .align 8 +s3c2410_do_sleep: + streq r7, [ r4 ] @ SDRAM sleep command + streq r8, [ r5 ] @ SDRAM power-down config + streq r9, [ r6 ] @ CPU sleep +1: beq 1b + mov pc, r14 diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index a110cff9cf6b..183e4033ce61 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -8,17 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 16-May-2003 BJD Created initial version - * 16-Aug-2003 BJD Fixed header files and copyright, added URL - * 05-Sep-2003 BJD Moved to kernel v2.6 - * 18-Jan-2004 BJD Added serial port configuration - * 21-Aug-2004 BJD Added new struct s3c2410_board handler - * 28-Sep-2004 BJD Updates for new serial port bits - * 04-Nov-2004 BJD Updated UART configuration process - * 10-Jan-2005 BJD Removed s3c2410_clock_tick_rate - * 13-Aug-2005 DA Removed UART from initial I/O mappings */ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/s3c2412-dma.c b/arch/arm/mach-s3c2410/s3c2412-dma.c new file mode 100644 index 000000000000..171f3706d36d --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2412-dma.c @@ -0,0 +1,160 @@ +/* linux/arch/arm/mach-s3c2410/s3c2412-dma.c + * + * (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2412 DMA selection + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sysdev.h> + +#include <asm/dma.h> +#include <asm/arch/dma.h> +#include <asm/io.h> + +#include "dma.h" +#include "cpu.h" + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-ac97.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/regs-sdi.h> +#include <asm/arch/regs-iis.h> +#include <asm/arch/regs-spi.h> + +#define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID } + +static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { + [DMACH_XD0] = { + .name = "xdreq0", + .channels = MAP(S3C2412_DMAREQSEL_XDREQ0), + }, + [DMACH_XD1] = { + .name = "xdreq1", + .channels = MAP(S3C2412_DMAREQSEL_XDREQ1), + }, + [DMACH_SDI] = { + .name = "sdi", + .channels = MAP(S3C2412_DMAREQSEL_SDI), + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_SPI0] = { + .name = "spi0", + .channels = MAP(S3C2412_DMAREQSEL_SPI0TX), + .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, + }, + [DMACH_SPI1] = { + .name = "spi1", + .channels = MAP(S3C2412_DMAREQSEL_SPI1TX), + .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, + }, + [DMACH_UART0] = { + .name = "uart0", + .channels = MAP(S3C2412_DMAREQSEL_UART0_0), + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1] = { + .name = "uart1", + .channels = MAP(S3C2412_DMAREQSEL_UART1_0), + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2] = { + .name = "uart2", + .channels = MAP(S3C2412_DMAREQSEL_UART2_0), + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_UART0_SRC2] = { + .name = "uart0", + .channels = MAP(S3C2412_DMAREQSEL_UART0_1), + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1_SRC2] = { + .name = "uart1", + .channels = MAP(S3C2412_DMAREQSEL_UART1_1), + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2_SRC2] = { + .name = "uart2", + .channels = MAP(S3C2412_DMAREQSEL_UART2_1), + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_TIMER] = { + .name = "timer", + .channels = MAP(S3C2412_DMAREQSEL_TIMER), + }, + [DMACH_I2S_IN] = { + .name = "i2s-sdi", + .channels = MAP(S3C2412_DMAREQSEL_I2SRX), + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_I2S_OUT] = { + .name = "i2s-sdo", + .channels = MAP(S3C2412_DMAREQSEL_I2STX), + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_USB_EP1] = { + .name = "usb-ep1", + .channels = MAP(S3C2412_DMAREQSEL_USBEP1), + }, + [DMACH_USB_EP2] = { + .name = "usb-ep2", + .channels = MAP(S3C2412_DMAREQSEL_USBEP2), + }, + [DMACH_USB_EP3] = { + .name = "usb-ep3", + .channels = MAP(S3C2412_DMAREQSEL_USBEP3), + }, + [DMACH_USB_EP4] = { + .name = "usb-ep4", + .channels = MAP(S3C2412_DMAREQSEL_USBEP4), + }, +}; + +static void s3c2412_dma_select(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map) +{ + writel(chan->regs + S3C2412_DMA_DMAREQSEL, + map->channels[0] | S3C2412_DMAREQSEL_HW); +} + +static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { + .select = s3c2412_dma_select, + .dcon_mask = 0, + .map = s3c2412_dma_mappings, + .map_size = ARRAY_SIZE(s3c2412_dma_mappings), +}; + +static int s3c2412_dma_add(struct sys_device *sysdev) +{ + return s3c24xx_dma_init_map(&s3c2412_dma_sel); +} + +static struct sysdev_driver s3c2412_dma_driver = { + .add = s3c2412_dma_add, +}; + +static int __init s3c2412_dma_init(void) +{ + return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_dma_driver); +} + +arch_initcall(s3c2412_dma_init); diff --git a/arch/arm/mach-s3c2410/s3c2412-irq.c b/arch/arm/mach-s3c2410/s3c2412-irq.c index c80ec93dfea9..7f741547658f 100644 --- a/arch/arm/mach-s3c2410/s3c2412-irq.c +++ b/arch/arm/mach-s3c2410/s3c2412-irq.c @@ -37,6 +37,7 @@ #include "cpu.h" #include "irq.h" +#include "pm.h" /* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by * having them turn up in both the INT* and the EINT* registers. Whilst @@ -120,6 +121,8 @@ static int s3c2412_irq_add(struct sys_device *sysdev) static struct sysdev_driver s3c2412_irq_driver = { .add = s3c2412_irq_add, + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, }; static int s3c2412_irq_init(void) diff --git a/arch/arm/mach-s3c2410/s3c2412-pm.c b/arch/arm/mach-s3c2410/s3c2412-pm.c new file mode 100644 index 000000000000..19b63322d259 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2412-pm.c @@ -0,0 +1,128 @@ +/* linux/arch/arm/mach-s3c2410/s3c2412-pm.c + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * http://armlinux.simtec.co.uk/. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/sysdev.h> +#include <linux/platform_device.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> + +#include <asm/arch/regs-power.h> +#include <asm/arch/regs-gpioj.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-dsc.h> + +#include "cpu.h" +#include "pm.h" + +#include "s3c2412.h" + +static void s3c2412_cpu_suspend(void) +{ + unsigned long tmp; + + /* set our standby method to sleep */ + + tmp = __raw_readl(S3C2412_PWRCFG); + tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP; + __raw_writel(tmp, S3C2412_PWRCFG); + + /* issue the standby signal into the pm unit. Note, we + * issue a write-buffer drain just in case */ + + tmp = 0; + + asm("b 1f\n\t" + ".align 5\n\t" + "1:\n\t" + "mcr p15, 0, %0, c7, c10, 4\n\t" + "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp)); + + /* we should never get past here */ + + panic("sleep resumed to originator?"); +} + +static void s3c2412_pm_prepare(void) +{ +} + +static int s3c2412_pm_add(struct sys_device *sysdev) +{ + pm_cpu_prep = s3c2412_pm_prepare; + pm_cpu_sleep = s3c2412_cpu_suspend; + + return 0; +} + +static struct sleep_save s3c2412_sleep[] = { + SAVE_ITEM(S3C2412_DSC0), + SAVE_ITEM(S3C2412_DSC1), + SAVE_ITEM(S3C2413_GPJDAT), + SAVE_ITEM(S3C2413_GPJCON), + SAVE_ITEM(S3C2413_GPJUP), + + /* save the PWRCFG to get back to original sleep method */ + + SAVE_ITEM(S3C2412_PWRCFG), + + /* save the sleep configuration anyway, just in case these + * get damaged during wakeup */ + + SAVE_ITEM(S3C2412_GPBSLPCON), + SAVE_ITEM(S3C2412_GPCSLPCON), + SAVE_ITEM(S3C2412_GPDSLPCON), + SAVE_ITEM(S3C2412_GPESLPCON), + SAVE_ITEM(S3C2412_GPFSLPCON), + SAVE_ITEM(S3C2412_GPGSLPCON), + SAVE_ITEM(S3C2412_GPHSLPCON), + SAVE_ITEM(S3C2413_GPJSLPCON), +}; + +static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state) +{ + s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); + return 0; +} + +static int s3c2412_pm_resume(struct sys_device *dev) +{ + unsigned long tmp; + + tmp = __raw_readl(S3C2412_PWRCFG); + tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK; + tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE; + __raw_writel(tmp, S3C2412_PWRCFG); + + s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); + return 0; +} + +static struct sysdev_driver s3c2412_pm_driver = { + .add = s3c2412_pm_add, + .suspend = s3c2412_pm_suspend, + .resume = s3c2412_pm_resume, +}; + +static __init int s3c2412_pm_init(void) +{ + return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver); +} + +arch_initcall(s3c2412_pm_init); diff --git a/arch/arm/mach-s3c2410/s3c2412.c b/arch/arm/mach-s3c2410/s3c2412.c index 2d163f7600be..e76431c41461 100644 --- a/arch/arm/mach-s3c2410/s3c2412.c +++ b/arch/arm/mach-s3c2410/s3c2412.c @@ -8,17 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 16-May-2003 BJD Created initial version - * 16-Aug-2003 BJD Fixed header files and copyright, added URL - * 05-Sep-2003 BJD Moved to kernel v2.6 - * 18-Jan-2004 BJD Added serial port configuration - * 21-Aug-2004 BJD Added new struct s3c2410_board handler - * 28-Sep-2004 BJD Updates for new serial port bits - * 04-Nov-2004 BJD Updated UART configuration process - * 10-Jan-2005 BJD Removed s3c2410_clock_tick_rate - * 13-Aug-2005 DA Removed UART from initial I/O mappings */ #include <linux/kernel.h> @@ -56,6 +45,13 @@ #ifndef CONFIG_CPU_S3C2412_ONLY void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; + +static inline void s3c2412_init_gpio2(void) +{ + s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10; +} +#else +#define s3c2412_init_gpio2() do { } while(0) #endif /* Initial IO mappings */ @@ -76,6 +72,7 @@ void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no) /* rename devices that are s3c2412/s3c2413 specific */ s3c_device_sdi.name = "s3c2412-sdi"; + s3c_device_lcd.name = "s3c2412-lcd"; s3c_device_nand.name = "s3c2412-nand"; } @@ -110,7 +107,7 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size) { /* move base of IO */ - s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10; + s3c2412_init_gpio2(); /* set our idle function */ @@ -161,48 +158,8 @@ void __init s3c2412_init_clocks(int xtal) * as a driver which may support both 2410 and 2440 may try and use it. */ -#ifdef CONFIG_PM -static struct sleep_save s3c2412_sleep[] = { - SAVE_ITEM(S3C2412_DSC0), - SAVE_ITEM(S3C2412_DSC1), - SAVE_ITEM(S3C2413_GPJDAT), - SAVE_ITEM(S3C2413_GPJCON), - SAVE_ITEM(S3C2413_GPJUP), - - /* save the sleep configuration anyway, just in case these - * get damaged during wakeup */ - - SAVE_ITEM(S3C2412_GPBSLPCON), - SAVE_ITEM(S3C2412_GPCSLPCON), - SAVE_ITEM(S3C2412_GPDSLPCON), - SAVE_ITEM(S3C2412_GPESLPCON), - SAVE_ITEM(S3C2412_GPFSLPCON), - SAVE_ITEM(S3C2412_GPGSLPCON), - SAVE_ITEM(S3C2412_GPHSLPCON), - SAVE_ITEM(S3C2413_GPJSLPCON), -}; - -static int s3c2412_suspend(struct sys_device *dev, pm_message_t state) -{ - s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); - return 0; -} - -static int s3c2412_resume(struct sys_device *dev) -{ - s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); - return 0; -} - -#else -#define s3c2412_suspend NULL -#define s3c2412_resume NULL -#endif - struct sysdev_class s3c2412_sysclass = { set_kset_name("s3c2412-core"), - .suspend = s3c2412_suspend, - .resume = s3c2412_resume }; static int __init s3c2412_core_init(void) diff --git a/arch/arm/mach-s3c2410/s3c2440-dma.c b/arch/arm/mach-s3c2410/s3c2440-dma.c new file mode 100644 index 000000000000..11e109c84a15 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2440-dma.c @@ -0,0 +1,164 @@ +/* linux/arch/arm/mach-s3c2410/s3c2440-dma.c + * + * (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2440 DMA selection + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sysdev.h> + +#include <asm/dma.h> +#include <asm/arch/dma.h> +#include "dma.h" + +#include "cpu.h" + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-ac97.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/regs-sdi.h> +#include <asm/arch/regs-iis.h> +#include <asm/arch/regs-spi.h> + +static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { + [DMACH_XD0] = { + .name = "xdreq0", + .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, + }, + [DMACH_XD1] = { + .name = "xdreq1", + .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, + }, + [DMACH_SDI] = { + .name = "sdi", + .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, + .channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_SPI0] = { + .name = "spi0", + .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, + }, + [DMACH_SPI1] = { + .name = "spi1", + .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, + }, + [DMACH_UART0] = { + .name = "uart0", + .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1] = { + .name = "uart1", + .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2] = { + .name = "uart2", + .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_TIMER] = { + .name = "timer", + .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, + }, + [DMACH_I2S_IN] = { + .name = "i2s-sdi", + .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_I2S_OUT] = { + .name = "i2s-sdo", + .channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_PCM_IN] = { + .name = "pcm-in", + .channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID, + .channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID, + .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, + }, + [DMACH_PCM_OUT] = { + .name = "pcm-out", + .channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID, + .channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID, + .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, + }, + [DMACH_MIC_IN] = { + .name = "mic-in", + .channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID, + .channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID, + .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA, + }, + [DMACH_USB_EP1] = { + .name = "usb-ep1", + .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, + }, + [DMACH_USB_EP2] = { + .name = "usb-ep2", + .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, + }, + [DMACH_USB_EP3] = { + .name = "usb-ep3", + .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, + }, + [DMACH_USB_EP4] = { + .name = "usb-ep4", + .channels[3] = S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, + }, +}; + +static void s3c2440_dma_select(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map) +{ + chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; +} + +static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = { + .select = s3c2440_dma_select, + .dcon_mask = 7 << 24, + .map = s3c2440_dma_mappings, + .map_size = ARRAY_SIZE(s3c2440_dma_mappings), +}; + +static int s3c2440_dma_add(struct sys_device *sysdev) +{ + return s3c24xx_dma_init_map(&s3c2440_dma_sel); +} + +static struct sysdev_driver s3c2440_dma_driver = { + .add = s3c2440_dma_add, +}; + +static int __init s3c2440_dma_init(void) +{ + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_dma_driver); +} + +arch_initcall(s3c2440_dma_init); + diff --git a/arch/arm/mach-s3c2410/s3c2440-dsc.c b/arch/arm/mach-s3c2410/s3c2440-dsc.c index 16fa2a3b38fa..c92ea66ba45e 100644 --- a/arch/arm/mach-s3c2410/s3c2440-dsc.c +++ b/arch/arm/mach-s3c2410/s3c2440-dsc.c @@ -8,11 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 29-Aug-2004 BJD Start of drive-strength control - * 09-Nov-2004 BJD Added symbol export - * 11-Jan-2005 BJD Include fix */ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2410/s3c2440-irq.c index 1667ba1fa43d..fc08febe2e54 100644 --- a/arch/arm/mach-s3c2410/s3c2440-irq.c +++ b/arch/arm/mach-s3c2410/s3c2440-irq.c @@ -119,7 +119,7 @@ static int s3c2440_irq_add(struct sys_device *sysdev) } static struct sysdev_driver s3c2440_irq_driver = { - .add = s3c2440_irq_add, + .add = s3c2440_irq_add, }; static int s3c2440_irq_init(void) diff --git a/arch/arm/mach-s3c2410/s3c244x-irq.c b/arch/arm/mach-s3c2410/s3c244x-irq.c index 44c5affa9b89..0d13546c3500 100644 --- a/arch/arm/mach-s3c2410/s3c244x-irq.c +++ b/arch/arm/mach-s3c2410/s3c244x-irq.c @@ -120,7 +120,9 @@ static int s3c244x_irq_add(struct sys_device *sysdev) } static struct sysdev_driver s3c2440_irq_driver = { - .add = s3c244x_irq_add, + .add = s3c244x_irq_add, + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, }; static int s3c2440_irq_init(void) @@ -131,9 +133,12 @@ static int s3c2440_irq_init(void) arch_initcall(s3c2440_irq_init); static struct sysdev_driver s3c2442_irq_driver = { - .add = s3c244x_irq_add, + .add = s3c244x_irq_add, + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, }; + static int s3c2442_irq_init(void) { return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_irq_driver); diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S index a7561a79fc82..2018c2e1dcc5 100644 --- a/arch/arm/mach-s3c2410/sleep.S +++ b/arch/arm/mach-s3c2410/sleep.S @@ -41,15 +41,25 @@ .text - /* s3c2410_cpu_suspend + /* s3c2410_cpu_save * - * put the cpu into sleep mode + * save enough of the CPU state to allow us to re-start + * pm.c code. as we store items like the sp/lr, we will + * end up returning from this function when the cpu resumes + * so the return value is set to mark this. + * + * This arangement means we avoid having to flush the cache + * from this code. * * entry: - * r0 = sleep save block + * r0 = pointer to save block + * + * exit: + * r0 = 0 => we stored everything + * 1 => resumed from sleep */ -ENTRY(s3c2410_cpu_suspend) +ENTRY(s3c2410_cpu_save) stmfd sp!, { r4 - r12, lr } @@ store co-processor registers @@ -62,44 +72,14 @@ ENTRY(s3c2410_cpu_suspend) stmia r0, { r4 - r13 } - @@ flush the caches to ensure everything is back out to - @@ SDRAM before the core powers down - -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH - bl arm920_flush_kern_cache_all -#endif - - @@ prepare cpu to sleep - - ldr r4, =S3C2410_REFRESH - ldr r5, =S3C24XX_MISCCR - ldr r6, =S3C2410_CLKCON - ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB) - ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB) - ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB) - - orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command - orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals - orr r9, r9, #S3C2410_CLKCON_POWER @ power down command - - teq pc, #0 @ first as a trial-run to load cache - bl s3c2410_do_sleep - teq r0, r0 @ now do it for real - b s3c2410_do_sleep @ - - @@ align next bit of code to cache line - .align 8 -s3c2410_do_sleep: - streq r7, [ r4 ] @ SDRAM sleep command - streq r8, [ r5 ] @ SDRAM power-down config - streq r9, [ r6 ] @ CPU sleep -1: beq 1b - mov pc, r14 + mov r0, #0 + ldmfd sp, { r4 - r12, pc } @@ return to the caller, after having the MMU @@ turned on, this restores the last bits from the @@ stack resume_with_mmu: + mov r0, #1 ldmfd sp!, { r4 - r12, pc } .ltorg diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index 6b22d8f0a00d..c635efa7cd31 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -10,12 +10,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 14-Sep-2004 BJD Created - * 18-Oct-2004 BJD Cleanups, and added code to report OC cleared - * 09-Aug-2005 BJD Renamed s3c2410_report_oc to s3c2410_usb_report_oc - * 09-Aug-2005 BJD Ports powered only if both are enabled */ #define DEBUG diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index a0dfa390e34b..6496eb645cee 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -91,30 +91,29 @@ static struct mcp_plat_data collie_mcp_data = { /* * low-level UART features. */ -static struct locomo_dev *uart_dev = NULL; +struct platform_device collie_locomo_device; static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl) { - if (!uart_dev) return; - if (mctrl & TIOCM_RTS) - locomo_gpio_write(uart_dev, LOCOMO_GPIO_RTS, 0); + locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0); else - locomo_gpio_write(uart_dev, LOCOMO_GPIO_RTS, 1); + locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1); if (mctrl & TIOCM_DTR) - locomo_gpio_write(uart_dev, LOCOMO_GPIO_DTR, 0); + locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0); else - locomo_gpio_write(uart_dev, LOCOMO_GPIO_DTR, 1); + locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1); } static u_int collie_uart_get_mctrl(struct uart_port *port) { int ret = TIOCM_CD; unsigned int r; - if (!uart_dev) return ret; - r = locomo_gpio_read_output(uart_dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR); + r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR); + if (r == -ENODEV) + return ret; if (r & LOCOMO_GPIO_CTS) ret |= TIOCM_CTS; if (r & LOCOMO_GPIO_DSR) @@ -130,13 +129,11 @@ static struct sa1100_port_fns collie_port_fns __initdata = { static int collie_uart_probe(struct locomo_dev *dev) { - uart_dev = dev; return 0; } static int collie_uart_remove(struct locomo_dev *dev) { - uart_dev = NULL; return 0; } @@ -170,7 +167,7 @@ static struct resource locomo_resources[] = { }, }; -static struct platform_device locomo_device = { +struct platform_device collie_locomo_device = { .name = "locomo", .id = 0, .num_resources = ARRAY_SIZE(locomo_resources), @@ -178,7 +175,7 @@ static struct platform_device locomo_device = { }; static struct platform_device *devices[] __initdata = { - &locomo_device, + &collie_locomo_device, &colliescoop_device, }; diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 41b370090b60..13bbd08ff841 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -117,7 +117,6 @@ static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int wh } else { switch (size) { case 1: - addr &= ~3; v = __raw_readb(addr); break; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index b4f220dd5eb8..c0bfb8212b77 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -15,6 +15,7 @@ config CPU_ARM610 select CPU_32v3 select CPU_CACHE_V3 select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V3 if MMU select CPU_TLB_V3 if MMU help @@ -24,6 +25,20 @@ config CPU_ARM610 Say Y if you want support for the ARM610 processor. Otherwise, say N. +# ARM7TDMI +config CPU_ARM7TDMI + bool "Support ARM7TDMI processor" + depends on !MMU + select CPU_32v4T + select CPU_ABRT_LV4T + select CPU_CACHE_V4 + help + A 32-bit RISC microprocessor based on the ARM7 processor core + which has no memory control unit and cache. + + Say Y if you want support for the ARM7TDMI processor. + Otherwise, say N. + # ARM710 config CPU_ARM710 bool "Support ARM710 processor" if !ARCH_CLPS7500 && ARCH_RPC @@ -31,6 +46,7 @@ config CPU_ARM710 select CPU_32v3 select CPU_CACHE_V3 select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V3 if MMU select CPU_TLB_V3 if MMU help @@ -50,6 +66,7 @@ config CPU_ARM720T select CPU_ABRT_LV4T select CPU_CACHE_V4 select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WT if MMU select CPU_TLB_V4WT if MMU help @@ -59,6 +76,36 @@ config CPU_ARM720T Say Y if you want support for the ARM720T processor. Otherwise, say N. +# ARM740T +config CPU_ARM740T + bool "Support ARM740T processor" if ARCH_INTEGRATOR + depends on !MMU + select CPU_32v4T + select CPU_ABRT_LV4T + select CPU_CACHE_V3 # although the core is v4t + select CPU_CP15_MPU + help + A 32-bit RISC processor with 8KB cache or 4KB variants, + write buffer and MPU(Protection Unit) built around + an ARM7TDMI core. + + Say Y if you want support for the ARM740T processor. + Otherwise, say N. + +# ARM9TDMI +config CPU_ARM9TDMI + bool "Support ARM9TDMI processor" + depends on !MMU + select CPU_32v4T + select CPU_ABRT_NOMMU + select CPU_CACHE_V4 + help + A 32-bit RISC microprocessor based on the ARM9 processor core + which has no memory control unit and cache. + + Say Y if you want support for the ARM9TDMI processor. + Otherwise, say N. + # ARM920T config CPU_ARM920T bool "Support ARM920T processor" @@ -68,6 +115,7 @@ config CPU_ARM920T select CPU_ABRT_EV4T select CPU_CACHE_V4WT select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU select CPU_TLB_V4WBI if MMU help @@ -89,6 +137,7 @@ config CPU_ARM922T select CPU_ABRT_EV4T select CPU_CACHE_V4WT select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU select CPU_TLB_V4WBI if MMU help @@ -108,6 +157,7 @@ config CPU_ARM925T select CPU_ABRT_EV4T select CPU_CACHE_V4WT select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU select CPU_TLB_V4WBI if MMU help @@ -126,6 +176,7 @@ config CPU_ARM926T select CPU_32v5 select CPU_ABRT_EV5TJ select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU select CPU_TLB_V4WBI if MMU help @@ -136,6 +187,39 @@ config CPU_ARM926T Say Y if you want support for the ARM926T processor. Otherwise, say N. +# ARM940T +config CPU_ARM940T + bool "Support ARM940T processor" if ARCH_INTEGRATOR + depends on !MMU + select CPU_32v4T + select CPU_ABRT_NOMMU + select CPU_CACHE_VIVT + select CPU_CP15_MPU + help + ARM940T is a member of the ARM9TDMI family of general- + purpose microprocessors with MPU and seperate 4KB + instruction and 4KB data cases, each with a 4-word line + length. + + Say Y if you want support for the ARM940T processor. + Otherwise, say N. + +# ARM946E-S +config CPU_ARM946E + bool "Support ARM946E-S processor" if ARCH_INTEGRATOR + depends on !MMU + select CPU_32v5 + select CPU_ABRT_NOMMU + select CPU_CACHE_VIVT + select CPU_CP15_MPU + help + ARM946E-S is a member of the ARM9E-S family of high- + performance, 32-bit system-on-chip processor solutions. + The TCM and ARMv5TE 32-bit instruction set is supported. + + Say Y if you want support for the ARM946E-S processor. + Otherwise, say N. + # ARM1020 - needs validating config CPU_ARM1020 bool "Support ARM1020T (rev 0) processor" @@ -144,6 +228,7 @@ config CPU_ARM1020 select CPU_ABRT_EV4T select CPU_CACHE_V4WT select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU select CPU_TLB_V4WBI if MMU help @@ -161,6 +246,7 @@ config CPU_ARM1020E select CPU_ABRT_EV4T select CPU_CACHE_V4WT select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU select CPU_TLB_V4WBI if MMU depends on n @@ -172,6 +258,7 @@ config CPU_ARM1022 select CPU_32v5 select CPU_ABRT_EV4T select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU # can probably do better select CPU_TLB_V4WBI if MMU help @@ -189,6 +276,7 @@ config CPU_ARM1026 select CPU_32v5 select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10 select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU # can probably do better select CPU_TLB_V4WBI if MMU help @@ -207,6 +295,7 @@ config CPU_SA110 select CPU_ABRT_EV4 select CPU_CACHE_V4WB select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_COPY_V4WB if MMU select CPU_TLB_V4WB if MMU help @@ -227,16 +316,18 @@ config CPU_SA1100 select CPU_ABRT_EV4 select CPU_CACHE_V4WB select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_TLB_V4WB if MMU # XScale config CPU_XSCALE bool - depends on ARCH_IOP3XX || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000 + depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000 default y select CPU_32v5 select CPU_ABRT_EV5T select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_TLB_V4WBI if MMU # XScale Core Version 3 @@ -247,6 +338,7 @@ config CPU_XSC3 select CPU_32v5 select CPU_ABRT_EV5T select CPU_CACHE_VIVT + select CPU_CP15_MMU select CPU_TLB_V4WBI if MMU select IO_36 @@ -258,6 +350,7 @@ config CPU_V6 select CPU_ABRT_EV6 select CPU_CACHE_V6 select CPU_CACHE_VIPT + select CPU_CP15_MMU select CPU_COPY_V6 if MMU select CPU_TLB_V6 if MMU @@ -299,6 +392,9 @@ config CPU_32v6 bool # The abort model +config CPU_ABRT_NOMMU + bool + config CPU_ABRT_EV4 bool @@ -380,6 +476,23 @@ config CPU_TLB_V6 endif +config CPU_CP15 + bool + help + Processor has the CP15 register. + +config CPU_CP15_MMU + bool + select CPU_CP15 + help + Processor has the CP15 register, which has MMU related registers. + +config CPU_CP15_MPU + bool + select CPU_CP15 + help + Processor has the CP15 register, which has MPU related registers. + # # CPU supports 36-bit I/O # @@ -390,7 +503,7 @@ comment "Processor Features" config ARM_THUMB bool "Support Thumb user binaries" - depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 + depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 default y help Say Y if you want to include kernel support for running user space @@ -411,23 +524,48 @@ config CPU_BIG_ENDIAN port must properly enable any big-endian related features of your chipset/board/processor. +config CPU_HIGH_VECTOR + depends !MMU && CPU_CP15 && !CPU_ARM740T + bool "Select the High exception vector" + default n + help + Say Y here to select high exception vector(0xFFFF0000~). + The exception vector can be vary depending on the platform + design in nommu mode. If your platform needs to select + high exception vector, say Y. + Otherwise or if you are unsure, say N, and the low exception + vector (0x00000000~) will be used. + config CPU_ICACHE_DISABLE - bool "Disable I-Cache" - depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6 + bool "Disable I-Cache (I-bit)" + depends on CPU_CP15 && !(CPU_ARM610 || CPU_ARM710 || CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3) help Say Y here to disable the processor instruction cache. Unless you have a reason not to or are unsure, say N. config CPU_DCACHE_DISABLE - bool "Disable D-Cache" - depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6 + bool "Disable D-Cache (C-bit)" + depends on CPU_CP15 help Say Y here to disable the processor data cache. Unless you have a reason not to or are unsure, say N. +config CPU_DCACHE_SIZE + hex + depends on CPU_ARM740T || CPU_ARM946E + default 0x00001000 if CPU_ARM740T + default 0x00002000 # default size for ARM946E-S + help + Some cores are synthesizable to have various sized cache. For + ARM946E-S case, it can vary from 0KB to 1MB. + To support such cache operations, it is efficient to know the size + before compile time. + If your SoC is configured to have a different size, define the value + here with proper conditions. + config CPU_DCACHE_WRITETHROUGH bool "Force write through D-cache" - depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE + depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE default y if CPU_ARM925T help Say Y here to use the data cache in writethrough mode. Unless you @@ -435,7 +573,7 @@ config CPU_DCACHE_WRITETHROUGH config CPU_CACHE_ROUND_ROBIN bool "Round robin I and D cache replacement algorithm" - depends on (CPU_ARM926T || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE) + depends on (CPU_ARM926T || CPU_ARM946E || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE) help Say Y here to use the predictable round-robin cache replacement policy. Unless you specifically require this or are unsure, say N. diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 21a2770226ee..d2f5672ecf62 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -6,7 +6,7 @@ obj-y := consistent.o extable.o fault.o init.o \ iomap.o obj-$(CONFIG_MMU) += fault-armv.o flush.o ioremap.o mmap.o \ - mm-armv.o + pgd.o mmu.o ifneq ($(CONFIG_MMU),y) obj-y += nommu.o @@ -17,6 +17,7 @@ obj-$(CONFIG_MODULES) += proc-syms.o obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o obj-$(CONFIG_DISCONTIGMEM) += discontig.o +obj-$(CONFIG_CPU_ABRT_NOMMU) += abort-nommu.o obj-$(CONFIG_CPU_ABRT_EV4) += abort-ev4.o obj-$(CONFIG_CPU_ABRT_EV4T) += abort-ev4t.o obj-$(CONFIG_CPU_ABRT_LV4T) += abort-lv4t.o @@ -33,7 +34,7 @@ obj-$(CONFIG_CPU_CACHE_V6) += cache-v6.o obj-$(CONFIG_CPU_COPY_V3) += copypage-v3.o obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o obj-$(CONFIG_CPU_COPY_V4WB) += copypage-v4wb.o -obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o mmu.o +obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o context.o obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o @@ -46,11 +47,16 @@ obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o +obj-$(CONFIG_CPU_ARM7TDMI) += proc-arm7tdmi.o obj-$(CONFIG_CPU_ARM720T) += proc-arm720.o +obj-$(CONFIG_CPU_ARM740T) += proc-arm740.o +obj-$(CONFIG_CPU_ARM9TDMI) += proc-arm9tdmi.o obj-$(CONFIG_CPU_ARM920T) += proc-arm920.o obj-$(CONFIG_CPU_ARM922T) += proc-arm922.o obj-$(CONFIG_CPU_ARM925T) += proc-arm925.o obj-$(CONFIG_CPU_ARM926T) += proc-arm926.o +obj-$(CONFIG_CPU_ARM940T) += proc-arm940.o +obj-$(CONFIG_CPU_ARM946E) += proc-arm946.o obj-$(CONFIG_CPU_ARM1020) += proc-arm1020.o obj-$(CONFIG_CPU_ARM1020E) += proc-arm1020e.o obj-$(CONFIG_CPU_ARM1022) += proc-arm1022.o diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S index db743e510214..9fb7b0e25ea1 100644 --- a/arch/arm/mm/abort-lv4t.S +++ b/arch/arm/mm/abort-lv4t.S @@ -19,11 +19,16 @@ */ ENTRY(v4t_late_abort) tst r3, #PSR_T_BIT @ check for thumb mode +#ifdef CONFIG_CPU_CP15_MMU mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR + bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR +#else + mov r0, #0 @ clear r0, r1 (no FSR/FAR) + mov r1, #0 +#endif bne .data_thumb_abort ldr r8, [r2] @ read arm instruction - bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR tst r8, #1 << 20 @ L = 1 -> write? orreq r1, r1, #1 << 11 @ yes. and r7, r8, #15 << 24 diff --git a/arch/arm/mm/abort-nommu.S b/arch/arm/mm/abort-nommu.S new file mode 100644 index 000000000000..a7cc7f9ee45d --- /dev/null +++ b/arch/arm/mm/abort-nommu.S @@ -0,0 +1,19 @@ +#include <linux/linkage.h> +#include <asm/assembler.h> +/* + * Function: nommu_early_abort + * + * Params : r2 = address of aborted instruction + * : r3 = saved SPSR + * + * Returns : r0 = 0 (abort address) + * : r1 = 0 (FSR) + * + * Note: There is no FSR/FAR on !CPU_CP15_MMU cores. + * Just fill zero into the registers. + */ + .align 5 +ENTRY(nommu_early_abort) + mov r0, #0 @ clear r0, r1 (no FSR/FAR) + mov r1, #0 + mov pc, lr diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index e0d21bbbe7d7..aa109f074dd9 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -735,7 +735,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) /* * We got a fault - fix it up, or die. */ - do_bad_area(current, current->mm, addr, fsr, regs); + do_bad_area(addr, fsr, regs); return 0; swp: diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S index b8ad5d58ebe2..b2908063ed6a 100644 --- a/arch/arm/mm/cache-v4.S +++ b/arch/arm/mm/cache-v4.S @@ -29,9 +29,13 @@ ENTRY(v4_flush_user_cache_all) * Clean and invalidate the entire cache. */ ENTRY(v4_flush_kern_cache_all) +#ifdef CPU_CP15 mov r0, #0 mcr p15, 0, r0, c7, c7, 0 @ flush ID cache mov pc, lr +#else + /* FALLTHROUGH */ +#endif /* * flush_user_cache_range(start, end, flags) @@ -44,9 +48,13 @@ ENTRY(v4_flush_kern_cache_all) * - flags - vma_area_struct flags describing address space */ ENTRY(v4_flush_user_cache_range) +#ifdef CPU_CP15 mov ip, #0 mcreq p15, 0, ip, c7, c7, 0 @ flush ID cache mov pc, lr +#else + /* FALLTHROUGH */ +#endif /* * coherent_kern_range(start, end) @@ -108,8 +116,10 @@ ENTRY(v4_dma_inv_range) * - end - virtual end address */ ENTRY(v4_dma_flush_range) +#ifdef CPU_CP15 mov r0, #0 mcr p15, 0, r0, c7, c7, 0 @ flush ID cache +#endif /* FALLTHROUGH */ /* diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c new file mode 100644 index 000000000000..79e800202424 --- /dev/null +++ b/arch/arm/mm/context.c @@ -0,0 +1,45 @@ +/* + * linux/arch/arm/mm/context.c + * + * Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/mm.h> + +#include <asm/mmu_context.h> +#include <asm/tlbflush.h> + +unsigned int cpu_last_asid = { 1 << ASID_BITS }; + +/* + * We fork()ed a process, and we need a new context for the child + * to run in. We reserve version 0 for initial tasks so we will + * always allocate an ASID. + */ +void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + mm->context.id = 0; +} + +void __new_context(struct mm_struct *mm) +{ + unsigned int asid; + + asid = ++cpu_last_asid; + if (asid == 0) + asid = cpu_last_asid = 1 << ASID_BITS; + + /* + * If we've used up all our ASIDs, we need + * to start a new version and flush the TLB. + */ + if ((asid & ~ASID_MASK) == 0) + flush_tlb_all(); + + mm->context.id = asid; +} diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index fc69dccdace1..df1645e14b4c 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -20,6 +20,8 @@ #include <asm/pgtable.h> #include <asm/tlbflush.h> +#include "mm.h" + /* * 0xffff8000 to 0xffffffff is reserved for any ARM architecture * specific hacks for copying pages efficiently. @@ -27,8 +29,6 @@ #define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ L_PTE_CACHEABLE) -#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) - static DEFINE_SPINLOCK(minicache_lock); /* diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index 269ce6913ee9..3d0d3a963d20 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -17,6 +17,8 @@ #include <asm/tlbflush.h> #include <asm/cacheflush.h> +#include "mm.h" + #if SHMLBA > 16384 #error FIX ME #endif @@ -24,8 +26,6 @@ #define from_address (0xffff8000) #define to_address (0xffffc000) -#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) - static DEFINE_SPINLOCK(v6_lock); /* diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index 42a6ee255ce0..84ebe0aa379e 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -20,6 +20,8 @@ #include <asm/pgtable.h> #include <asm/tlbflush.h> +#include "mm.h" + /* * 0xffff8000 to 0xffffffff is reserved for any ARM architecture * specific hacks for copying pages efficiently. @@ -29,8 +31,6 @@ #define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ L_PTE_CACHEABLE) -#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) - static DEFINE_SPINLOCK(minicache_lock); /* diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index c5e0622c7765..5e658a874498 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -131,10 +131,11 @@ __do_user_fault(struct task_struct *tsk, unsigned long addr, force_sig_info(sig, &si, tsk); } -void -do_bad_area(struct task_struct *tsk, struct mm_struct *mm, unsigned long addr, - unsigned int fsr, struct pt_regs *regs) +void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { + struct task_struct *tsk = current; + struct mm_struct *mm = tsk->active_mm; + /* * If we are in kernel mode at this point, we * have no context to handle this fault with. @@ -170,7 +171,7 @@ good_area: if (fsr & (1 << 11)) /* write? */ mask = VM_WRITE; else - mask = VM_READ|VM_EXEC; + mask = VM_READ|VM_EXEC|VM_WRITE; fault = VM_FAULT_BADACCESS; if (!(vma->vm_flags & mask)) @@ -197,7 +198,7 @@ survive: return fault; } - if (tsk->pid != 1) + if (!is_init(tsk)) goto out; /* @@ -319,7 +320,6 @@ static int do_translation_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { - struct task_struct *tsk; unsigned int index; pgd_t *pgd, *pgd_k; pmd_t *pmd, *pmd_k; @@ -351,9 +351,7 @@ do_translation_fault(unsigned long addr, unsigned int fsr, return 0; bad_area: - tsk = current; - - do_bad_area(tsk, tsk->active_mm, addr, fsr, regs); + do_bad_area(addr, fsr, regs); return 0; } @@ -364,8 +362,7 @@ bad_area: static int do_sect_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { - struct task_struct *tsk = current; - do_bad_area(tsk, tsk->active_mm, addr, fsr, regs); + do_bad_area(addr, fsr, regs); return 0; } diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h index 73b59e83227f..49e9e3804de4 100644 --- a/arch/arm/mm/fault.h +++ b/arch/arm/mm/fault.h @@ -1,6 +1,3 @@ -void do_bad_area(struct task_struct *tsk, struct mm_struct *mm, - unsigned long addr, unsigned int fsr, struct pt_regs *regs); - -void show_pte(struct mm_struct *mm, unsigned long addr); +void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs); unsigned long search_exception_table(unsigned long addr); diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index d438ce41cdd5..454205b789d5 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -15,12 +15,12 @@ #include <asm/system.h> #include <asm/tlbflush.h> +#include "mm.h" + #ifdef CONFIG_CPU_CACHE_VIPT #define ALIAS_FLUSH_START 0xffff4000 -#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) - static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) { unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT); @@ -107,7 +107,7 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, /* VIPT non-aliasing cache */ if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask) && - vma->vm_flags | VM_EXEC) { + vma->vm_flags & VM_EXEC) { unsigned long addr = (unsigned long)kaddr; /* only flushing the kernel mapping on non-aliasing VIPT */ __cpuc_coherent_kern_range(addr, addr + len); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index fe3f7f625008..22217fe2650b 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -25,10 +25,9 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); +#include "mm.h" -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -extern void _stext, _text, _etext, __data_start, _end, __init_begin, __init_end; +extern void _text, _etext, __data_start, _end, __init_begin, __init_end; extern unsigned long phys_initrd_start; extern unsigned long phys_initrd_size; @@ -38,12 +37,6 @@ extern unsigned long phys_initrd_size; */ static struct meminfo meminfo __initdata = { 0, }; -/* - * empty_zero_page is a special page that is used for - * zero-initialized data and COW. - */ -struct page *empty_zero_page; - void show_mem(void) { int free = 0, total = 0, reserved = 0; @@ -83,16 +76,6 @@ void show_mem(void) printk("%d pages swap cached\n", cached); } -static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt) -{ - return pmd_offset(pgd, virt); -} - -static inline pmd_t *pmd_off_k(unsigned long virt) -{ - return pmd_off(pgd_offset_k(virt), virt); -} - #define for_each_nodebank(iter,mi,no) \ for (iter = 0; iter < mi->nr_banks; iter++) \ if (mi->bank[iter].node == no) @@ -176,62 +159,20 @@ static int __init check_initrd(struct meminfo *mi) return initrd_node; } -/* - * Reserve the various regions of node 0 - */ -static __init void reserve_node_zero(pg_data_t *pgdat) +static inline void map_memory_bank(struct membank *bank) { - unsigned long res_size = 0; - - /* - * Register the kernel text and data with bootmem. - * Note that this can only be in node 0. - */ -#ifdef CONFIG_XIP_KERNEL - reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start); -#else - reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext); -#endif - - /* - * Reserve the page tables. These are already in use, - * and can only be in node 0. - */ - reserve_bootmem_node(pgdat, __pa(swapper_pg_dir), - PTRS_PER_PGD * sizeof(pgd_t)); - - /* - * Hmm... This should go elsewhere, but we really really need to - * stop things allocating the low memory; ideally we need a better - * implementation of GFP_DMA which does not assume that DMA-able - * memory starts at zero. - */ - if (machine_is_integrator() || machine_is_cintegrator()) - res_size = __pa(swapper_pg_dir) - PHYS_OFFSET; +#ifdef CONFIG_MMU + struct map_desc map; - /* - * These should likewise go elsewhere. They pre-reserve the - * screen memory region at the start of main system memory. - */ - if (machine_is_edb7211()) - res_size = 0x00020000; - if (machine_is_p720t()) - res_size = 0x00014000; + map.pfn = __phys_to_pfn(bank->start); + map.virtual = __phys_to_virt(bank->start); + map.length = bank->size; + map.type = MT_MEMORY; -#ifdef CONFIG_SA1111 - /* - * Because of the SA1111 DMA bug, we want to preserve our - * precious DMA-able memory... - */ - res_size = __pa(swapper_pg_dir) - PHYS_OFFSET; + create_mapping(&map); #endif - if (res_size) - reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size); } -void __init build_mem_type_table(void); -void __init create_mapping(struct map_desc *md); - static unsigned long __init bootmem_init_node(int node, int initrd_node, struct meminfo *mi) { @@ -248,23 +189,18 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi) * Calculate the pfn range, and map the memory banks for this node. */ for_each_nodebank(i, mi, node) { + struct membank *bank = &mi->bank[i]; unsigned long start, end; - struct map_desc map; - start = mi->bank[i].start >> PAGE_SHIFT; - end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT; + start = bank->start >> PAGE_SHIFT; + end = (bank->start + bank->size) >> PAGE_SHIFT; if (start_pfn > start) start_pfn = start; if (end_pfn < end) end_pfn = end; - map.pfn = __phys_to_pfn(mi->bank[i].start); - map.virtual = __phys_to_virt(mi->bank[i].start); - map.length = mi->bank[i].size; - map.type = MT_MEMORY; - - create_mapping(&map); + map_memory_bank(bank); } /* @@ -346,9 +282,9 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi) return end_pfn; } -static void __init bootmem_init(struct meminfo *mi) +void __init bootmem_init(struct meminfo *mi) { - unsigned long addr, memend_pfn = 0; + unsigned long memend_pfn = 0; int node, initrd_node, i; /* @@ -361,26 +297,6 @@ static void __init bootmem_init(struct meminfo *mi) memcpy(&meminfo, mi, sizeof(meminfo)); /* - * Clear out all the mappings below the kernel image. - */ - for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE) - pmd_clear(pmd_off_k(addr)); -#ifdef CONFIG_XIP_KERNEL - /* The XIP kernel is mapped in the module area -- skip over it */ - addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK; -#endif - for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE) - pmd_clear(pmd_off_k(addr)); - - /* - * Clear out all the kernel space mappings, except for the first - * memory bank, up to the end of the vmalloc region. - */ - for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size); - addr < VMALLOC_END; addr += PGDIR_SIZE) - pmd_clear(pmd_off_k(addr)); - - /* * Locate which node contains the ramdisk image, if any. */ initrd_node = check_initrd(mi); @@ -413,114 +329,6 @@ static void __init bootmem_init(struct meminfo *mi) max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET; } -/* - * Set up device the mappings. Since we clear out the page tables for all - * mappings above VMALLOC_END, we will remove any debug device mappings. - * This means you have to be careful how you debug this function, or any - * called function. This means you can't use any function or debugging - * method which may touch any device, otherwise the kernel _will_ crash. - */ -static void __init devicemaps_init(struct machine_desc *mdesc) -{ - struct map_desc map; - unsigned long addr; - void *vectors; - - /* - * Allocate the vector page early. - */ - vectors = alloc_bootmem_low_pages(PAGE_SIZE); - BUG_ON(!vectors); - - for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) - pmd_clear(pmd_off_k(addr)); - - /* - * Map the kernel if it is XIP. - * It is always first in the modulearea. - */ -#ifdef CONFIG_XIP_KERNEL - map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & PGDIR_MASK); - map.virtual = MODULE_START; - map.length = ((unsigned long)&_etext - map.virtual + ~PGDIR_MASK) & PGDIR_MASK; - map.type = MT_ROM; - create_mapping(&map); -#endif - - /* - * Map the cache flushing regions. - */ -#ifdef FLUSH_BASE - map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS); - map.virtual = FLUSH_BASE; - map.length = SZ_1M; - map.type = MT_CACHECLEAN; - create_mapping(&map); -#endif -#ifdef FLUSH_BASE_MINICACHE - map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M); - map.virtual = FLUSH_BASE_MINICACHE; - map.length = SZ_1M; - map.type = MT_MINICLEAN; - create_mapping(&map); -#endif - - /* - * Create a mapping for the machine vectors at the high-vectors - * location (0xffff0000). If we aren't using high-vectors, also - * create a mapping at the low-vectors virtual address. - */ - map.pfn = __phys_to_pfn(virt_to_phys(vectors)); - map.virtual = 0xffff0000; - map.length = PAGE_SIZE; - map.type = MT_HIGH_VECTORS; - create_mapping(&map); - - if (!vectors_high()) { - map.virtual = 0; - map.type = MT_LOW_VECTORS; - create_mapping(&map); - } - - /* - * Ask the machine support to map in the statically mapped devices. - */ - if (mdesc->map_io) - mdesc->map_io(); - - /* - * Finally flush the caches and tlb to ensure that we're in a - * consistent state wrt the writebuffer. This also ensures that - * any write-allocated cache lines in the vector page are written - * back. After this point, we can start to touch devices again. - */ - local_flush_tlb_all(); - flush_cache_all(); -} - -/* - * paging_init() sets up the page tables, initialises the zone memory - * maps, and sets up the zero page, bad page and bad page tables. - */ -void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) -{ - void *zero_page; - - build_mem_type_table(); - bootmem_init(mi); - devicemaps_init(mdesc); - - top_pmd = pmd_off_k(0xffff0000); - - /* - * allocate the zero page. Note that we count on this going ok. - */ - zero_page = alloc_bootmem_low_pages(PAGE_SIZE); - memzero(zero_page, PAGE_SIZE); - empty_zero_page = virt_to_page(zero_page); - flush_dcache_page(empty_zero_page); -} - static inline void free_area(unsigned long addr, unsigned long end, char *s) { unsigned int size = (end - addr) >> 10; diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c deleted file mode 100644 index 38769f5862bc..000000000000 --- a/arch/arm/mm/mm-armv.c +++ /dev/null @@ -1,663 +0,0 @@ -/* - * linux/arch/arm/mm/mm-armv.c - * - * Copyright (C) 1998-2005 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Page table sludge for ARM v3 and v4 processor architectures. - */ -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/bootmem.h> -#include <linux/highmem.h> -#include <linux/nodemask.h> - -#include <asm/pgalloc.h> -#include <asm/page.h> -#include <asm/setup.h> -#include <asm/tlbflush.h> - -#include <asm/mach/map.h> - -#define CPOLICY_UNCACHED 0 -#define CPOLICY_BUFFERED 1 -#define CPOLICY_WRITETHROUGH 2 -#define CPOLICY_WRITEBACK 3 -#define CPOLICY_WRITEALLOC 4 - -static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK; -static unsigned int ecc_mask __initdata = 0; -pgprot_t pgprot_kernel; - -EXPORT_SYMBOL(pgprot_kernel); - -pmd_t *top_pmd; - -struct cachepolicy { - const char policy[16]; - unsigned int cr_mask; - unsigned int pmd; - unsigned int pte; -}; - -static struct cachepolicy cache_policies[] __initdata = { - { - .policy = "uncached", - .cr_mask = CR_W|CR_C, - .pmd = PMD_SECT_UNCACHED, - .pte = 0, - }, { - .policy = "buffered", - .cr_mask = CR_C, - .pmd = PMD_SECT_BUFFERED, - .pte = PTE_BUFFERABLE, - }, { - .policy = "writethrough", - .cr_mask = 0, - .pmd = PMD_SECT_WT, - .pte = PTE_CACHEABLE, - }, { - .policy = "writeback", - .cr_mask = 0, - .pmd = PMD_SECT_WB, - .pte = PTE_BUFFERABLE|PTE_CACHEABLE, - }, { - .policy = "writealloc", - .cr_mask = 0, - .pmd = PMD_SECT_WBWA, - .pte = PTE_BUFFERABLE|PTE_CACHEABLE, - } -}; - -/* - * These are useful for identifing cache coherency - * problems by allowing the cache or the cache and - * writebuffer to be turned off. (Note: the write - * buffer should not be on and the cache off). - */ -static void __init early_cachepolicy(char **p) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(cache_policies); i++) { - int len = strlen(cache_policies[i].policy); - - if (memcmp(*p, cache_policies[i].policy, len) == 0) { - cachepolicy = i; - cr_alignment &= ~cache_policies[i].cr_mask; - cr_no_alignment &= ~cache_policies[i].cr_mask; - *p += len; - break; - } - } - if (i == ARRAY_SIZE(cache_policies)) - printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n"); - flush_cache_all(); - set_cr(cr_alignment); -} - -static void __init early_nocache(char **__unused) -{ - char *p = "buffered"; - printk(KERN_WARNING "nocache is deprecated; use cachepolicy=%s\n", p); - early_cachepolicy(&p); -} - -static void __init early_nowrite(char **__unused) -{ - char *p = "uncached"; - printk(KERN_WARNING "nowb is deprecated; use cachepolicy=%s\n", p); - early_cachepolicy(&p); -} - -static void __init early_ecc(char **p) -{ - if (memcmp(*p, "on", 2) == 0) { - ecc_mask = PMD_PROTECTION; - *p += 2; - } else if (memcmp(*p, "off", 3) == 0) { - ecc_mask = 0; - *p += 3; - } -} - -__early_param("nocache", early_nocache); -__early_param("nowb", early_nowrite); -__early_param("cachepolicy=", early_cachepolicy); -__early_param("ecc=", early_ecc); - -static int __init noalign_setup(char *__unused) -{ - cr_alignment &= ~CR_A; - cr_no_alignment &= ~CR_A; - set_cr(cr_alignment); - return 1; -} - -__setup("noalign", noalign_setup); - -#define FIRST_KERNEL_PGD_NR (FIRST_USER_PGD_NR + USER_PTRS_PER_PGD) - -static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt) -{ - return pmd_offset(pgd, virt); -} - -static inline pmd_t *pmd_off_k(unsigned long virt) -{ - return pmd_off(pgd_offset_k(virt), virt); -} - -/* - * need to get a 16k page for level 1 - */ -pgd_t *get_pgd_slow(struct mm_struct *mm) -{ - pgd_t *new_pgd, *init_pgd; - pmd_t *new_pmd, *init_pmd; - pte_t *new_pte, *init_pte; - - new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 2); - if (!new_pgd) - goto no_pgd; - - memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t)); - - /* - * Copy over the kernel and IO PGD entries - */ - init_pgd = pgd_offset_k(0); - memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR, - (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t)); - - clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t)); - - if (!vectors_high()) { - /* - * On ARM, first page must always be allocated since it - * contains the machine vectors. - */ - new_pmd = pmd_alloc(mm, new_pgd, 0); - if (!new_pmd) - goto no_pmd; - - new_pte = pte_alloc_map(mm, new_pmd, 0); - if (!new_pte) - goto no_pte; - - init_pmd = pmd_offset(init_pgd, 0); - init_pte = pte_offset_map_nested(init_pmd, 0); - set_pte(new_pte, *init_pte); - pte_unmap_nested(init_pte); - pte_unmap(new_pte); - } - - return new_pgd; - -no_pte: - pmd_free(new_pmd); -no_pmd: - free_pages((unsigned long)new_pgd, 2); -no_pgd: - return NULL; -} - -void free_pgd_slow(pgd_t *pgd) -{ - pmd_t *pmd; - struct page *pte; - - if (!pgd) - return; - - /* pgd is always present and good */ - pmd = pmd_off(pgd, 0); - if (pmd_none(*pmd)) - goto free; - if (pmd_bad(*pmd)) { - pmd_ERROR(*pmd); - pmd_clear(pmd); - goto free; - } - - pte = pmd_page(*pmd); - pmd_clear(pmd); - dec_zone_page_state(virt_to_page((unsigned long *)pgd), NR_PAGETABLE); - pte_lock_deinit(pte); - pte_free(pte); - pmd_free(pmd); -free: - free_pages((unsigned long) pgd, 2); -} - -/* - * Create a SECTION PGD between VIRT and PHYS in domain - * DOMAIN with protection PROT. This operates on half- - * pgdir entry increments. - */ -static inline void -alloc_init_section(unsigned long virt, unsigned long phys, int prot) -{ - pmd_t *pmdp = pmd_off_k(virt); - - if (virt & (1 << 20)) - pmdp++; - - *pmdp = __pmd(phys | prot); - flush_pmd_entry(pmdp); -} - -/* - * Create a SUPER SECTION PGD between VIRT and PHYS with protection PROT - */ -static inline void -alloc_init_supersection(unsigned long virt, unsigned long phys, int prot) -{ - int i; - - for (i = 0; i < 16; i += 1) { - alloc_init_section(virt, phys, prot | PMD_SECT_SUPER); - - virt += (PGDIR_SIZE / 2); - } -} - -/* - * Add a PAGE mapping between VIRT and PHYS in domain - * DOMAIN with protection PROT. Note that due to the - * way we map the PTEs, we must allocate two PTE_SIZE'd - * blocks - one for the Linux pte table, and one for - * the hardware pte table. - */ -static inline void -alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pgprot_t prot) -{ - pmd_t *pmdp = pmd_off_k(virt); - pte_t *ptep; - - if (pmd_none(*pmdp)) { - ptep = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * - sizeof(pte_t)); - - __pmd_populate(pmdp, __pa(ptep) | prot_l1); - } - ptep = pte_offset_kernel(pmdp, virt); - - set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot)); -} - -struct mem_types { - unsigned int prot_pte; - unsigned int prot_l1; - unsigned int prot_sect; - unsigned int domain; -}; - -static struct mem_types mem_types[] __initdata = { - [MT_DEVICE] = { - .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | - L_PTE_WRITE, - .prot_l1 = PMD_TYPE_TABLE, - .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED | - PMD_SECT_AP_WRITE, - .domain = DOMAIN_IO, - }, - [MT_CACHECLEAN] = { - .prot_sect = PMD_TYPE_SECT | PMD_BIT4, - .domain = DOMAIN_KERNEL, - }, - [MT_MINICLEAN] = { - .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_MINICACHE, - .domain = DOMAIN_KERNEL, - }, - [MT_LOW_VECTORS] = { - .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | - L_PTE_EXEC, - .prot_l1 = PMD_TYPE_TABLE, - .domain = DOMAIN_USER, - }, - [MT_HIGH_VECTORS] = { - .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | - L_PTE_USER | L_PTE_EXEC, - .prot_l1 = PMD_TYPE_TABLE, - .domain = DOMAIN_USER, - }, - [MT_MEMORY] = { - .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_AP_WRITE, - .domain = DOMAIN_KERNEL, - }, - [MT_ROM] = { - .prot_sect = PMD_TYPE_SECT | PMD_BIT4, - .domain = DOMAIN_KERNEL, - }, - [MT_IXP2000_DEVICE] = { /* IXP2400 requires XCB=101 for on-chip I/O */ - .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | - L_PTE_WRITE, - .prot_l1 = PMD_TYPE_TABLE, - .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED | - PMD_SECT_AP_WRITE | PMD_SECT_BUFFERABLE | - PMD_SECT_TEX(1), - .domain = DOMAIN_IO, - }, - [MT_NONSHARED_DEVICE] = { - .prot_l1 = PMD_TYPE_TABLE, - .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_NONSHARED_DEV | - PMD_SECT_AP_WRITE, - .domain = DOMAIN_IO, - } -}; - -/* - * Adjust the PMD section entries according to the CPU in use. - */ -void __init build_mem_type_table(void) -{ - struct cachepolicy *cp; - unsigned int cr = get_cr(); - unsigned int user_pgprot, kern_pgprot; - int cpu_arch = cpu_architecture(); - int i; - -#if defined(CONFIG_CPU_DCACHE_DISABLE) - if (cachepolicy > CPOLICY_BUFFERED) - cachepolicy = CPOLICY_BUFFERED; -#elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH) - if (cachepolicy > CPOLICY_WRITETHROUGH) - cachepolicy = CPOLICY_WRITETHROUGH; -#endif - if (cpu_arch < CPU_ARCH_ARMv5) { - if (cachepolicy >= CPOLICY_WRITEALLOC) - cachepolicy = CPOLICY_WRITEBACK; - ecc_mask = 0; - } - - /* - * Xscale must not have PMD bit 4 set for section mappings. - */ - if (cpu_is_xscale()) - for (i = 0; i < ARRAY_SIZE(mem_types); i++) - mem_types[i].prot_sect &= ~PMD_BIT4; - - /* - * ARMv5 and lower, excluding Xscale, bit 4 must be set for - * page tables. - */ - if (cpu_arch < CPU_ARCH_ARMv6 && !cpu_is_xscale()) - for (i = 0; i < ARRAY_SIZE(mem_types); i++) - if (mem_types[i].prot_l1) - mem_types[i].prot_l1 |= PMD_BIT4; - - cp = &cache_policies[cachepolicy]; - kern_pgprot = user_pgprot = cp->pte; - - /* - * Enable CPU-specific coherency if supported. - * (Only available on XSC3 at the moment.) - */ - if (arch_is_coherent()) { - if (cpu_is_xsc3()) { - mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; - mem_types[MT_MEMORY].prot_pte |= L_PTE_COHERENT; - } - } - - /* - * ARMv6 and above have extended page tables. - */ - if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) { - /* - * bit 4 becomes XN which we must clear for the - * kernel memory mapping. - */ - mem_types[MT_MEMORY].prot_sect &= ~PMD_SECT_XN; - mem_types[MT_ROM].prot_sect &= ~PMD_SECT_XN; - - /* - * Mark cache clean areas and XIP ROM read only - * from SVC mode and no access from userspace. - */ - mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; - mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; - mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; - - /* - * Mark the device area as "shared device" - */ - mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE; - mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED; - - /* - * User pages need to be mapped with the ASID - * (iow, non-global) - */ - user_pgprot |= L_PTE_ASID; - -#ifdef CONFIG_SMP - /* - * Mark memory with the "shared" attribute for SMP systems - */ - user_pgprot |= L_PTE_SHARED; - kern_pgprot |= L_PTE_SHARED; - mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; -#endif - } - - for (i = 0; i < 16; i++) { - unsigned long v = pgprot_val(protection_map[i]); - v = (v & ~(L_PTE_BUFFERABLE|L_PTE_CACHEABLE)) | user_pgprot; - protection_map[i] = __pgprot(v); - } - - mem_types[MT_LOW_VECTORS].prot_pte |= kern_pgprot; - mem_types[MT_HIGH_VECTORS].prot_pte |= kern_pgprot; - - if (cpu_arch >= CPU_ARCH_ARMv5) { -#ifndef CONFIG_SMP - /* - * Only use write-through for non-SMP systems - */ - mem_types[MT_LOW_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE; - mem_types[MT_HIGH_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE; -#endif - } else { - mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1); - } - - pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | - L_PTE_DIRTY | L_PTE_WRITE | - L_PTE_EXEC | kern_pgprot); - - mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask; - mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask; - mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd; - mem_types[MT_ROM].prot_sect |= cp->pmd; - - switch (cp->pmd) { - case PMD_SECT_WT: - mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT; - break; - case PMD_SECT_WB: - case PMD_SECT_WBWA: - mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB; - break; - } - printk("Memory policy: ECC %sabled, Data cache %s\n", - ecc_mask ? "en" : "dis", cp->policy); -} - -#define vectors_base() (vectors_high() ? 0xffff0000 : 0) - -/* - * Create the page directory entries and any necessary - * page tables for the mapping specified by `md'. We - * are able to cope here with varying sizes and address - * offsets, and we take full advantage of sections and - * supersections. - */ -void __init create_mapping(struct map_desc *md) -{ - unsigned long virt, length; - int prot_sect, prot_l1, domain; - pgprot_t prot_pte; - unsigned long off = (u32)__pfn_to_phys(md->pfn); - - if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) { - printk(KERN_WARNING "BUG: not creating mapping for " - "0x%08llx at 0x%08lx in user region\n", - __pfn_to_phys((u64)md->pfn), md->virtual); - return; - } - - if ((md->type == MT_DEVICE || md->type == MT_ROM) && - md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) { - printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx " - "overlaps vmalloc space\n", - __pfn_to_phys((u64)md->pfn), md->virtual); - } - - domain = mem_types[md->type].domain; - prot_pte = __pgprot(mem_types[md->type].prot_pte); - prot_l1 = mem_types[md->type].prot_l1 | PMD_DOMAIN(domain); - prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain); - - /* - * Catch 36-bit addresses - */ - if(md->pfn >= 0x100000) { - if(domain) { - printk(KERN_ERR "MM: invalid domain in supersection " - "mapping for 0x%08llx at 0x%08lx\n", - __pfn_to_phys((u64)md->pfn), md->virtual); - return; - } - if((md->virtual | md->length | __pfn_to_phys(md->pfn)) - & ~SUPERSECTION_MASK) { - printk(KERN_ERR "MM: cannot create mapping for " - "0x%08llx at 0x%08lx invalid alignment\n", - __pfn_to_phys((u64)md->pfn), md->virtual); - return; - } - - /* - * Shift bits [35:32] of address into bits [23:20] of PMD - * (See ARMv6 spec). - */ - off |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20); - } - - virt = md->virtual; - off -= virt; - length = md->length; - - if (mem_types[md->type].prot_l1 == 0 && - (virt & 0xfffff || (virt + off) & 0xfffff || (virt + length) & 0xfffff)) { - printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not " - "be mapped using pages, ignoring.\n", - __pfn_to_phys(md->pfn), md->virtual); - return; - } - - while ((virt & 0xfffff || (virt + off) & 0xfffff) && length >= PAGE_SIZE) { - alloc_init_page(virt, virt + off, prot_l1, prot_pte); - - virt += PAGE_SIZE; - length -= PAGE_SIZE; - } - - /* N.B. ARMv6 supersections are only defined to work with domain 0. - * Since domain assignments can in fact be arbitrary, the - * 'domain == 0' check below is required to insure that ARMv6 - * supersections are only allocated for domain 0 regardless - * of the actual domain assignments in use. - */ - if ((cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3()) - && domain == 0) { - /* - * Align to supersection boundary if !high pages. - * High pages have already been checked for proper - * alignment above and they will fail the SUPSERSECTION_MASK - * check because of the way the address is encoded into - * offset. - */ - if (md->pfn <= 0x100000) { - while ((virt & ~SUPERSECTION_MASK || - (virt + off) & ~SUPERSECTION_MASK) && - length >= (PGDIR_SIZE / 2)) { - alloc_init_section(virt, virt + off, prot_sect); - - virt += (PGDIR_SIZE / 2); - length -= (PGDIR_SIZE / 2); - } - } - - while (length >= SUPERSECTION_SIZE) { - alloc_init_supersection(virt, virt + off, prot_sect); - - virt += SUPERSECTION_SIZE; - length -= SUPERSECTION_SIZE; - } - } - - /* - * A section mapping covers half a "pgdir" entry. - */ - while (length >= (PGDIR_SIZE / 2)) { - alloc_init_section(virt, virt + off, prot_sect); - - virt += (PGDIR_SIZE / 2); - length -= (PGDIR_SIZE / 2); - } - - while (length >= PAGE_SIZE) { - alloc_init_page(virt, virt + off, prot_l1, prot_pte); - - virt += PAGE_SIZE; - length -= PAGE_SIZE; - } -} - -/* - * In order to soft-boot, we need to insert a 1:1 mapping in place of - * the user-mode pages. This will then ensure that we have predictable - * results when turning the mmu off - */ -void setup_mm_for_reboot(char mode) -{ - unsigned long base_pmdval; - pgd_t *pgd; - int i; - - if (current->mm && current->mm->pgd) - pgd = current->mm->pgd; - else - pgd = init_mm.pgd; - - base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT; - if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) - base_pmdval |= PMD_BIT4; - - for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) { - unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval; - pmd_t *pmd; - - pmd = pmd_off(pgd, i << PGDIR_SHIFT); - pmd[0] = __pmd(pmdval); - pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1))); - flush_pmd_entry(pmd); - } -} - -/* - * Create the architecture specific mappings - */ -void __init iotable_init(struct map_desc *io_desc, int nr) -{ - int i; - - for (i = 0; i < nr; i++) - create_mapping(io_desc + i); -} diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h new file mode 100644 index 000000000000..bb2bc9ab6bd3 --- /dev/null +++ b/arch/arm/mm/mm.h @@ -0,0 +1,22 @@ +/* the upper-most page table pointer */ +extern pmd_t *top_pmd; + +#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) + +static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt) +{ + return pmd_offset(pgd, virt); +} + +static inline pmd_t *pmd_off_k(unsigned long virt) +{ + return pmd_off(pgd_offset_k(virt), virt); +} + +struct map_desc; +struct meminfo; +struct pglist_data; + +void __init create_mapping(struct map_desc *md); +void __init bootmem_init(struct meminfo *mi); +void reserve_node_zero(struct pglist_data *pgdat); diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 29e54807c5bc..b0b5f4694070 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -114,3 +114,25 @@ full_search: } } + +/* + * You really shouldn't be using read() or write() on /dev/mem. This + * might go away in the future. + */ +int valid_phys_addr_range(unsigned long addr, size_t size) +{ + if (addr + size > __pa(high_memory)) + return 0; + + return 1; +} + +/* + * We don't use supersection mappings for mmap() on /dev/mem, which + * means that we can't map the memory area above the 4G barrier into + * userspace. + */ +int valid_mmap_phys_addr_range(unsigned long pfn, size_t size) +{ + return !(pfn + (size >> PAGE_SHIFT) > 0x00100000); +} diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 0d90227a0a32..e566cbe4b222 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -1,45 +1,771 @@ /* * linux/arch/arm/mm/mmu.c * - * Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved. + * Copyright (C) 1995-2005 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> #include <linux/init.h> -#include <linux/sched.h> -#include <linux/mm.h> +#include <linux/bootmem.h> +#include <linux/mman.h> +#include <linux/nodemask.h> -#include <asm/mmu_context.h> -#include <asm/tlbflush.h> +#include <asm/mach-types.h> +#include <asm/setup.h> +#include <asm/sizes.h> +#include <asm/tlb.h> -unsigned int cpu_last_asid = { 1 << ASID_BITS }; +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "mm.h" + +DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); + +extern void _stext, __data_start, _end; +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; + +/* + * empty_zero_page is a special page that is used for + * zero-initialized data and COW. + */ +struct page *empty_zero_page; /* - * We fork()ed a process, and we need a new context for the child - * to run in. We reserve version 0 for initial tasks so we will - * always allocate an ASID. + * The pmd table for the upper-most set of pages. */ -void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) +pmd_t *top_pmd; + +#define CPOLICY_UNCACHED 0 +#define CPOLICY_BUFFERED 1 +#define CPOLICY_WRITETHROUGH 2 +#define CPOLICY_WRITEBACK 3 +#define CPOLICY_WRITEALLOC 4 + +static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK; +static unsigned int ecc_mask __initdata = 0; +pgprot_t pgprot_kernel; + +EXPORT_SYMBOL(pgprot_kernel); + +struct cachepolicy { + const char policy[16]; + unsigned int cr_mask; + unsigned int pmd; + unsigned int pte; +}; + +static struct cachepolicy cache_policies[] __initdata = { + { + .policy = "uncached", + .cr_mask = CR_W|CR_C, + .pmd = PMD_SECT_UNCACHED, + .pte = 0, + }, { + .policy = "buffered", + .cr_mask = CR_C, + .pmd = PMD_SECT_BUFFERED, + .pte = PTE_BUFFERABLE, + }, { + .policy = "writethrough", + .cr_mask = 0, + .pmd = PMD_SECT_WT, + .pte = PTE_CACHEABLE, + }, { + .policy = "writeback", + .cr_mask = 0, + .pmd = PMD_SECT_WB, + .pte = PTE_BUFFERABLE|PTE_CACHEABLE, + }, { + .policy = "writealloc", + .cr_mask = 0, + .pmd = PMD_SECT_WBWA, + .pte = PTE_BUFFERABLE|PTE_CACHEABLE, + } +}; + +/* + * These are useful for identifing cache coherency + * problems by allowing the cache or the cache and + * writebuffer to be turned off. (Note: the write + * buffer should not be on and the cache off). + */ +static void __init early_cachepolicy(char **p) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(cache_policies); i++) { + int len = strlen(cache_policies[i].policy); + + if (memcmp(*p, cache_policies[i].policy, len) == 0) { + cachepolicy = i; + cr_alignment &= ~cache_policies[i].cr_mask; + cr_no_alignment &= ~cache_policies[i].cr_mask; + *p += len; + break; + } + } + if (i == ARRAY_SIZE(cache_policies)) + printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n"); + flush_cache_all(); + set_cr(cr_alignment); +} +__early_param("cachepolicy=", early_cachepolicy); + +static void __init early_nocache(char **__unused) +{ + char *p = "buffered"; + printk(KERN_WARNING "nocache is deprecated; use cachepolicy=%s\n", p); + early_cachepolicy(&p); +} +__early_param("nocache", early_nocache); + +static void __init early_nowrite(char **__unused) +{ + char *p = "uncached"; + printk(KERN_WARNING "nowb is deprecated; use cachepolicy=%s\n", p); + early_cachepolicy(&p); +} +__early_param("nowb", early_nowrite); + +static void __init early_ecc(char **p) +{ + if (memcmp(*p, "on", 2) == 0) { + ecc_mask = PMD_PROTECTION; + *p += 2; + } else if (memcmp(*p, "off", 3) == 0) { + ecc_mask = 0; + *p += 3; + } +} +__early_param("ecc=", early_ecc); + +static int __init noalign_setup(char *__unused) { - mm->context.id = 0; + cr_alignment &= ~CR_A; + cr_no_alignment &= ~CR_A; + set_cr(cr_alignment); + return 1; } +__setup("noalign", noalign_setup); + +struct mem_types { + unsigned int prot_pte; + unsigned int prot_l1; + unsigned int prot_sect; + unsigned int domain; +}; -void __new_context(struct mm_struct *mm) +static struct mem_types mem_types[] __initdata = { + [MT_DEVICE] = { + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_WRITE, + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED | + PMD_SECT_AP_WRITE, + .domain = DOMAIN_IO, + }, + [MT_CACHECLEAN] = { + .prot_sect = PMD_TYPE_SECT | PMD_BIT4, + .domain = DOMAIN_KERNEL, + }, + [MT_MINICLEAN] = { + .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_MINICACHE, + .domain = DOMAIN_KERNEL, + }, + [MT_LOW_VECTORS] = { + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_EXEC, + .prot_l1 = PMD_TYPE_TABLE, + .domain = DOMAIN_USER, + }, + [MT_HIGH_VECTORS] = { + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_USER | L_PTE_EXEC, + .prot_l1 = PMD_TYPE_TABLE, + .domain = DOMAIN_USER, + }, + [MT_MEMORY] = { + .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_AP_WRITE, + .domain = DOMAIN_KERNEL, + }, + [MT_ROM] = { + .prot_sect = PMD_TYPE_SECT | PMD_BIT4, + .domain = DOMAIN_KERNEL, + }, + [MT_IXP2000_DEVICE] = { /* IXP2400 requires XCB=101 for on-chip I/O */ + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_WRITE, + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED | + PMD_SECT_AP_WRITE | PMD_SECT_BUFFERABLE | + PMD_SECT_TEX(1), + .domain = DOMAIN_IO, + }, + [MT_NONSHARED_DEVICE] = { + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_NONSHARED_DEV | + PMD_SECT_AP_WRITE, + .domain = DOMAIN_IO, + } +}; + +/* + * Adjust the PMD section entries according to the CPU in use. + */ +static void __init build_mem_type_table(void) { - unsigned int asid; + struct cachepolicy *cp; + unsigned int cr = get_cr(); + unsigned int user_pgprot, kern_pgprot; + int cpu_arch = cpu_architecture(); + int i; - asid = ++cpu_last_asid; - if (asid == 0) - asid = cpu_last_asid = 1 << ASID_BITS; +#if defined(CONFIG_CPU_DCACHE_DISABLE) + if (cachepolicy > CPOLICY_BUFFERED) + cachepolicy = CPOLICY_BUFFERED; +#elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH) + if (cachepolicy > CPOLICY_WRITETHROUGH) + cachepolicy = CPOLICY_WRITETHROUGH; +#endif + if (cpu_arch < CPU_ARCH_ARMv5) { + if (cachepolicy >= CPOLICY_WRITEALLOC) + cachepolicy = CPOLICY_WRITEBACK; + ecc_mask = 0; + } + + /* + * Xscale must not have PMD bit 4 set for section mappings. + */ + if (cpu_is_xscale()) + for (i = 0; i < ARRAY_SIZE(mem_types); i++) + mem_types[i].prot_sect &= ~PMD_BIT4; /* - * If we've used up all our ASIDs, we need - * to start a new version and flush the TLB. + * ARMv5 and lower, excluding Xscale, bit 4 must be set for + * page tables. */ - if ((asid & ~ASID_MASK) == 0) - flush_tlb_all(); + if (cpu_arch < CPU_ARCH_ARMv6 && !cpu_is_xscale()) + for (i = 0; i < ARRAY_SIZE(mem_types); i++) + if (mem_types[i].prot_l1) + mem_types[i].prot_l1 |= PMD_BIT4; + + cp = &cache_policies[cachepolicy]; + kern_pgprot = user_pgprot = cp->pte; + + /* + * Enable CPU-specific coherency if supported. + * (Only available on XSC3 at the moment.) + */ + if (arch_is_coherent()) { + if (cpu_is_xsc3()) { + mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; + mem_types[MT_MEMORY].prot_pte |= L_PTE_COHERENT; + } + } + + /* + * ARMv6 and above have extended page tables. + */ + if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) { + /* + * bit 4 becomes XN which we must clear for the + * kernel memory mapping. + */ + mem_types[MT_MEMORY].prot_sect &= ~PMD_SECT_XN; + mem_types[MT_ROM].prot_sect &= ~PMD_SECT_XN; + + /* + * Mark cache clean areas and XIP ROM read only + * from SVC mode and no access from userspace. + */ + mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; + mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; + mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; + + /* + * Mark the device area as "shared device" + */ + mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE; + mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED; + + /* + * User pages need to be mapped with the ASID + * (iow, non-global) + */ + user_pgprot |= L_PTE_ASID; + +#ifdef CONFIG_SMP + /* + * Mark memory with the "shared" attribute for SMP systems + */ + user_pgprot |= L_PTE_SHARED; + kern_pgprot |= L_PTE_SHARED; + mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; +#endif + } + + for (i = 0; i < 16; i++) { + unsigned long v = pgprot_val(protection_map[i]); + v = (v & ~(L_PTE_BUFFERABLE|L_PTE_CACHEABLE)) | user_pgprot; + protection_map[i] = __pgprot(v); + } + + mem_types[MT_LOW_VECTORS].prot_pte |= kern_pgprot; + mem_types[MT_HIGH_VECTORS].prot_pte |= kern_pgprot; + + if (cpu_arch >= CPU_ARCH_ARMv5) { +#ifndef CONFIG_SMP + /* + * Only use write-through for non-SMP systems + */ + mem_types[MT_LOW_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE; + mem_types[MT_HIGH_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE; +#endif + } else { + mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1); + } + + pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | + L_PTE_DIRTY | L_PTE_WRITE | + L_PTE_EXEC | kern_pgprot); + + mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask; + mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask; + mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd; + mem_types[MT_ROM].prot_sect |= cp->pmd; + + switch (cp->pmd) { + case PMD_SECT_WT: + mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT; + break; + case PMD_SECT_WB: + case PMD_SECT_WBWA: + mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB; + break; + } + printk("Memory policy: ECC %sabled, Data cache %s\n", + ecc_mask ? "en" : "dis", cp->policy); +} + +#define vectors_base() (vectors_high() ? 0xffff0000 : 0) + +/* + * Create a SECTION PGD between VIRT and PHYS in domain + * DOMAIN with protection PROT. This operates on half- + * pgdir entry increments. + */ +static inline void +alloc_init_section(unsigned long virt, unsigned long phys, int prot) +{ + pmd_t *pmdp = pmd_off_k(virt); + + if (virt & (1 << 20)) + pmdp++; + + *pmdp = __pmd(phys | prot); + flush_pmd_entry(pmdp); +} + +/* + * Create a SUPER SECTION PGD between VIRT and PHYS with protection PROT + */ +static inline void +alloc_init_supersection(unsigned long virt, unsigned long phys, int prot) +{ + int i; + + for (i = 0; i < 16; i += 1) { + alloc_init_section(virt, phys, prot | PMD_SECT_SUPER); + + virt += (PGDIR_SIZE / 2); + } +} + +/* + * Add a PAGE mapping between VIRT and PHYS in domain + * DOMAIN with protection PROT. Note that due to the + * way we map the PTEs, we must allocate two PTE_SIZE'd + * blocks - one for the Linux pte table, and one for + * the hardware pte table. + */ +static inline void +alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pgprot_t prot) +{ + pmd_t *pmdp = pmd_off_k(virt); + pte_t *ptep; + + if (pmd_none(*pmdp)) { + ptep = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * + sizeof(pte_t)); + + __pmd_populate(pmdp, __pa(ptep) | prot_l1); + } + ptep = pte_offset_kernel(pmdp, virt); + + set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot)); +} + +/* + * Create the page directory entries and any necessary + * page tables for the mapping specified by `md'. We + * are able to cope here with varying sizes and address + * offsets, and we take full advantage of sections and + * supersections. + */ +void __init create_mapping(struct map_desc *md) +{ + unsigned long virt, length; + int prot_sect, prot_l1, domain; + pgprot_t prot_pte; + unsigned long off = (u32)__pfn_to_phys(md->pfn); + + if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) { + printk(KERN_WARNING "BUG: not creating mapping for " + "0x%08llx at 0x%08lx in user region\n", + __pfn_to_phys((u64)md->pfn), md->virtual); + return; + } + + if ((md->type == MT_DEVICE || md->type == MT_ROM) && + md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) { + printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx " + "overlaps vmalloc space\n", + __pfn_to_phys((u64)md->pfn), md->virtual); + } + + domain = mem_types[md->type].domain; + prot_pte = __pgprot(mem_types[md->type].prot_pte); + prot_l1 = mem_types[md->type].prot_l1 | PMD_DOMAIN(domain); + prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain); + + /* + * Catch 36-bit addresses + */ + if(md->pfn >= 0x100000) { + if(domain) { + printk(KERN_ERR "MM: invalid domain in supersection " + "mapping for 0x%08llx at 0x%08lx\n", + __pfn_to_phys((u64)md->pfn), md->virtual); + return; + } + if((md->virtual | md->length | __pfn_to_phys(md->pfn)) + & ~SUPERSECTION_MASK) { + printk(KERN_ERR "MM: cannot create mapping for " + "0x%08llx at 0x%08lx invalid alignment\n", + __pfn_to_phys((u64)md->pfn), md->virtual); + return; + } + + /* + * Shift bits [35:32] of address into bits [23:20] of PMD + * (See ARMv6 spec). + */ + off |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20); + } + + virt = md->virtual; + off -= virt; + length = md->length; + + if (mem_types[md->type].prot_l1 == 0 && + (virt & 0xfffff || (virt + off) & 0xfffff || (virt + length) & 0xfffff)) { + printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not " + "be mapped using pages, ignoring.\n", + __pfn_to_phys(md->pfn), md->virtual); + return; + } + + while ((virt & 0xfffff || (virt + off) & 0xfffff) && length >= PAGE_SIZE) { + alloc_init_page(virt, virt + off, prot_l1, prot_pte); + + virt += PAGE_SIZE; + length -= PAGE_SIZE; + } + + /* N.B. ARMv6 supersections are only defined to work with domain 0. + * Since domain assignments can in fact be arbitrary, the + * 'domain == 0' check below is required to insure that ARMv6 + * supersections are only allocated for domain 0 regardless + * of the actual domain assignments in use. + */ + if ((cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3()) + && domain == 0) { + /* + * Align to supersection boundary if !high pages. + * High pages have already been checked for proper + * alignment above and they will fail the SUPSERSECTION_MASK + * check because of the way the address is encoded into + * offset. + */ + if (md->pfn <= 0x100000) { + while ((virt & ~SUPERSECTION_MASK || + (virt + off) & ~SUPERSECTION_MASK) && + length >= (PGDIR_SIZE / 2)) { + alloc_init_section(virt, virt + off, prot_sect); + + virt += (PGDIR_SIZE / 2); + length -= (PGDIR_SIZE / 2); + } + } + + while (length >= SUPERSECTION_SIZE) { + alloc_init_supersection(virt, virt + off, prot_sect); + + virt += SUPERSECTION_SIZE; + length -= SUPERSECTION_SIZE; + } + } + + /* + * A section mapping covers half a "pgdir" entry. + */ + while (length >= (PGDIR_SIZE / 2)) { + alloc_init_section(virt, virt + off, prot_sect); + + virt += (PGDIR_SIZE / 2); + length -= (PGDIR_SIZE / 2); + } + + while (length >= PAGE_SIZE) { + alloc_init_page(virt, virt + off, prot_l1, prot_pte); + + virt += PAGE_SIZE; + length -= PAGE_SIZE; + } +} + +/* + * Create the architecture specific mappings + */ +void __init iotable_init(struct map_desc *io_desc, int nr) +{ + int i; + + for (i = 0; i < nr; i++) + create_mapping(io_desc + i); +} + +static inline void prepare_page_table(struct meminfo *mi) +{ + unsigned long addr; + + /* + * Clear out all the mappings below the kernel image. + */ + for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); + +#ifdef CONFIG_XIP_KERNEL + /* The XIP kernel is mapped in the module area -- skip over it */ + addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK; +#endif + for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); + + /* + * Clear out all the kernel space mappings, except for the first + * memory bank, up to the end of the vmalloc region. + */ + for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size); + addr < VMALLOC_END; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); +} + +/* + * Reserve the various regions of node 0 + */ +void __init reserve_node_zero(pg_data_t *pgdat) +{ + unsigned long res_size = 0; + + /* + * Register the kernel text and data with bootmem. + * Note that this can only be in node 0. + */ +#ifdef CONFIG_XIP_KERNEL + reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start); +#else + reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext); +#endif + + /* + * Reserve the page tables. These are already in use, + * and can only be in node 0. + */ + reserve_bootmem_node(pgdat, __pa(swapper_pg_dir), + PTRS_PER_PGD * sizeof(pgd_t)); + + /* + * Hmm... This should go elsewhere, but we really really need to + * stop things allocating the low memory; ideally we need a better + * implementation of GFP_DMA which does not assume that DMA-able + * memory starts at zero. + */ + if (machine_is_integrator() || machine_is_cintegrator()) + res_size = __pa(swapper_pg_dir) - PHYS_OFFSET; + + /* + * These should likewise go elsewhere. They pre-reserve the + * screen memory region at the start of main system memory. + */ + if (machine_is_edb7211()) + res_size = 0x00020000; + if (machine_is_p720t()) + res_size = 0x00014000; + +#ifdef CONFIG_SA1111 + /* + * Because of the SA1111 DMA bug, we want to preserve our + * precious DMA-able memory... + */ + res_size = __pa(swapper_pg_dir) - PHYS_OFFSET; +#endif + if (res_size) + reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size); +} + +/* + * Set up device the mappings. Since we clear out the page tables for all + * mappings above VMALLOC_END, we will remove any debug device mappings. + * This means you have to be careful how you debug this function, or any + * called function. This means you can't use any function or debugging + * method which may touch any device, otherwise the kernel _will_ crash. + */ +static void __init devicemaps_init(struct machine_desc *mdesc) +{ + struct map_desc map; + unsigned long addr; + void *vectors; + + /* + * Allocate the vector page early. + */ + vectors = alloc_bootmem_low_pages(PAGE_SIZE); + BUG_ON(!vectors); + + for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); + + /* + * Map the kernel if it is XIP. + * It is always first in the modulearea. + */ +#ifdef CONFIG_XIP_KERNEL + map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK); + map.virtual = MODULE_START; + map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK; + map.type = MT_ROM; + create_mapping(&map); +#endif + + /* + * Map the cache flushing regions. + */ +#ifdef FLUSH_BASE + map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS); + map.virtual = FLUSH_BASE; + map.length = SZ_1M; + map.type = MT_CACHECLEAN; + create_mapping(&map); +#endif +#ifdef FLUSH_BASE_MINICACHE + map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M); + map.virtual = FLUSH_BASE_MINICACHE; + map.length = SZ_1M; + map.type = MT_MINICLEAN; + create_mapping(&map); +#endif + + /* + * Create a mapping for the machine vectors at the high-vectors + * location (0xffff0000). If we aren't using high-vectors, also + * create a mapping at the low-vectors virtual address. + */ + map.pfn = __phys_to_pfn(virt_to_phys(vectors)); + map.virtual = 0xffff0000; + map.length = PAGE_SIZE; + map.type = MT_HIGH_VECTORS; + create_mapping(&map); + + if (!vectors_high()) { + map.virtual = 0; + map.type = MT_LOW_VECTORS; + create_mapping(&map); + } + + /* + * Ask the machine support to map in the statically mapped devices. + */ + if (mdesc->map_io) + mdesc->map_io(); + + /* + * Finally flush the caches and tlb to ensure that we're in a + * consistent state wrt the writebuffer. This also ensures that + * any write-allocated cache lines in the vector page are written + * back. After this point, we can start to touch devices again. + */ + local_flush_tlb_all(); + flush_cache_all(); +} + +/* + * paging_init() sets up the page tables, initialises the zone memory + * maps, and sets up the zero page, bad page and bad page tables. + */ +void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) +{ + void *zero_page; + + build_mem_type_table(); + prepare_page_table(mi); + bootmem_init(mi); + devicemaps_init(mdesc); + + top_pmd = pmd_off_k(0xffff0000); + + /* + * allocate the zero page. Note that we count on this going ok. + */ + zero_page = alloc_bootmem_low_pages(PAGE_SIZE); + memzero(zero_page, PAGE_SIZE); + empty_zero_page = virt_to_page(zero_page); + flush_dcache_page(empty_zero_page); +} + +/* + * In order to soft-boot, we need to insert a 1:1 mapping in place of + * the user-mode pages. This will then ensure that we have predictable + * results when turning the mmu off + */ +void setup_mm_for_reboot(char mode) +{ + unsigned long base_pmdval; + pgd_t *pgd; + int i; + + if (current->mm && current->mm->pgd) + pgd = current->mm->pgd; + else + pgd = init_mm.pgd; + + base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT; + if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) + base_pmdval |= PMD_BIT4; + + for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) { + unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval; + pmd_t *pmd; - mm->context.id = asid; + pmd = pmd_off(pgd, i << PGDIR_SHIFT); + pmd[0] = __pmd(pmdval); + pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1))); + flush_pmd_entry(pmd); + } } diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 1464ed817b5d..d0e66424a597 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -11,6 +11,49 @@ #include <asm/io.h> #include <asm/page.h> +#include "mm.h" + +extern void _stext, __data_start, _end; + +/* + * Reserve the various regions of node 0 + */ +void __init reserve_node_zero(pg_data_t *pgdat) +{ + /* + * Register the kernel text and data with bootmem. + * Note that this can only be in node 0. + */ +#ifdef CONFIG_XIP_KERNEL + reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start); +#else + reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext); +#endif + + /* + * Register the exception vector page. + * some architectures which the DRAM is the exception vector to trap, + * alloc_page breaks with error, although it is not NULL, but "0." + */ + reserve_bootmem_node(pgdat, CONFIG_VECTORS_BASE, PAGE_SIZE); +} + +/* + * paging_init() sets up the page tables, initialises the zone memory + * maps, and sets up the zero page, bad page and bad page tables. + */ +void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) +{ + bootmem_init(mi); +} + +/* + * We don't need to do anything here for nommu machines. + */ +void setup_mm_for_reboot(char mode) +{ +} + void flush_dcache_page(struct page *page) { __cpuc_flush_dcache_page(page_address(page)); diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c new file mode 100644 index 000000000000..20c1b0df75f2 --- /dev/null +++ b/arch/arm/mm/pgd.c @@ -0,0 +1,101 @@ +/* + * linux/arch/arm/mm/pgd.c + * + * Copyright (C) 1998-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/mm.h> +#include <linux/highmem.h> + +#include <asm/pgalloc.h> +#include <asm/page.h> +#include <asm/tlbflush.h> + +#include "mm.h" + +#define FIRST_KERNEL_PGD_NR (FIRST_USER_PGD_NR + USER_PTRS_PER_PGD) + +/* + * need to get a 16k page for level 1 + */ +pgd_t *get_pgd_slow(struct mm_struct *mm) +{ + pgd_t *new_pgd, *init_pgd; + pmd_t *new_pmd, *init_pmd; + pte_t *new_pte, *init_pte; + + new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 2); + if (!new_pgd) + goto no_pgd; + + memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t)); + + /* + * Copy over the kernel and IO PGD entries + */ + init_pgd = pgd_offset_k(0); + memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR, + (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t)); + + clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t)); + + if (!vectors_high()) { + /* + * On ARM, first page must always be allocated since it + * contains the machine vectors. + */ + new_pmd = pmd_alloc(mm, new_pgd, 0); + if (!new_pmd) + goto no_pmd; + + new_pte = pte_alloc_map(mm, new_pmd, 0); + if (!new_pte) + goto no_pte; + + init_pmd = pmd_offset(init_pgd, 0); + init_pte = pte_offset_map_nested(init_pmd, 0); + set_pte(new_pte, *init_pte); + pte_unmap_nested(init_pte); + pte_unmap(new_pte); + } + + return new_pgd; + +no_pte: + pmd_free(new_pmd); +no_pmd: + free_pages((unsigned long)new_pgd, 2); +no_pgd: + return NULL; +} + +void free_pgd_slow(pgd_t *pgd) +{ + pmd_t *pmd; + struct page *pte; + + if (!pgd) + return; + + /* pgd is always present and good */ + pmd = pmd_off(pgd, 0); + if (pmd_none(*pmd)) + goto free; + if (pmd_bad(*pmd)) { + pmd_ERROR(*pmd); + pmd_clear(pmd); + goto free; + } + + pte = pmd_page(*pmd); + pmd_clear(pmd); + dec_zone_page_state(virt_to_page((unsigned long *)pgd), NR_PAGETABLE); + pte_lock_deinit(pte); + pte_free(pte); + pmd_free(pmd); +free: + free_pages((unsigned long) pgd, 2); +} diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S new file mode 100644 index 000000000000..40713818a87b --- /dev/null +++ b/arch/arm/mm/proc-arm740.S @@ -0,0 +1,174 @@ +/* + * linux/arch/arm/mm/arm740.S: utility functions for ARM740 + * + * Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/asm-offsets.h> +#include <asm/pgtable-hwdef.h> +#include <asm/pgtable.h> +#include <asm/procinfo.h> +#include <asm/ptrace.h> + + .text +/* + * cpu_arm740_proc_init() + * cpu_arm740_do_idle() + * cpu_arm740_dcache_clean_area() + * cpu_arm740_switch_mm() + * + * These are not required. + */ +ENTRY(cpu_arm740_proc_init) +ENTRY(cpu_arm740_do_idle) +ENTRY(cpu_arm740_dcache_clean_area) +ENTRY(cpu_arm740_switch_mm) + mov pc, lr + +/* + * cpu_arm740_proc_fin() + */ +ENTRY(cpu_arm740_proc_fin) + stmfd sp!, {lr} + mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE + msr cpsr_c, ip + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #0x3f000000 @ bank/f/lock/s + bic r0, r0, #0x0000000c @ w-buffer/cache + mcr p15, 0, r0, c1, c0, 0 @ disable caches + mcr p15, 0, r0, c7, c0, 0 @ invalidate cache + ldmfd sp!, {pc} + +/* + * cpu_arm740_reset(loc) + * Params : r0 = address to jump to + * Notes : This sets up everything for a reset + */ +ENTRY(cpu_arm740_reset) + mov ip, #0 + mcr p15, 0, ip, c7, c0, 0 @ invalidate cache + mrc p15, 0, ip, c1, c0, 0 @ get ctrl register + bic ip, ip, #0x0000000c @ ............wc.. + mcr p15, 0, ip, c1, c0, 0 @ ctrl register + mov pc, r0 + + __INIT + + .type __arm740_setup, #function +__arm740_setup: + mov r0, #0 + mcr p15, 0, r0, c7, c0, 0 @ invalidate caches + + mcr p15, 0, r0, c6, c3 @ disable area 3~7 + mcr p15, 0, r0, c6, c4 + mcr p15, 0, r0, c6, c5 + mcr p15, 0, r0, c6, c6 + mcr p15, 0, r0, c6, c7 + + mov r0, #0x0000003F @ base = 0, size = 4GB + mcr p15, 0, r0, c6, c0 @ set area 0, default + + ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM + ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB) + mov r2, #10 @ 11 is the minimum (4KB) +1: add r2, r2, #1 @ area size *= 2 + mov r1, r1, lsr #1 + bne 1b @ count not zero r-shift + orr r0, r0, r2, lsl #1 @ the area register value + orr r0, r0, #1 @ set enable bit + mcr p15, 0, r0, c6, c1 @ set area 1, RAM + + ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH + ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB) + mov r2, #10 @ 11 is the minimum (4KB) +1: add r2, r2, #1 @ area size *= 2 + mov r1, r1, lsr #1 + bne 1b @ count not zero r-shift + orr r0, r0, r2, lsl #1 @ the area register value + orr r0, r0, #1 @ set enable bit + mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH + + mov r0, #0x06 + mcr p15, 0, r0, c2, c0 @ Region 1&2 cacheable +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mov r0, #0x00 @ disable whole write buffer +#else + mov r0, #0x02 @ Region 1 write bufferred +#endif + mcr p15, 0, r0, c3, c0 + + mov r0, #0x10000 + sub r0, r0, #1 @ r0 = 0xffff + mcr p15, 0, r0, c5, c0 @ all read/write access + + mrc p15, 0, r0, c1, c0 @ get control register + bic r0, r0, #0x3F000000 @ set to standard caching mode + @ need some benchmark + orr r0, r0, #0x0000000d @ MPU/Cache/WB + + mov pc, lr + + .size __arm740_setup, . - __arm740_setup + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + .type arm740_processor_functions, #object +ENTRY(arm740_processor_functions) + .word v4t_late_abort + .word cpu_arm740_proc_init + .word cpu_arm740_proc_fin + .word cpu_arm740_reset + .word cpu_arm740_do_idle + .word cpu_arm740_dcache_clean_area + .word cpu_arm740_switch_mm + .word 0 @ cpu_*_set_pte + .size arm740_processor_functions, . - arm740_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv4" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v4" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_arm740_name, #object +cpu_arm740_name: + .ascii "ARM740T" + .size cpu_arm740_name, . - cpu_arm740_name + + .align + + .section ".proc.info.init", #alloc, #execinstr + .type __arm740_proc_info,#object +__arm740_proc_info: + .long 0x41807400 + .long 0xfffffff0 + .long 0 + b __arm740_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT + .long cpu_arm740_name + .long arm740_processor_functions + .long 0 + .long 0 + .long v3_cache_fns @ cache model + .size __arm740_proc_info, . - __arm740_proc_info + + diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S new file mode 100644 index 000000000000..22d7e3100ea6 --- /dev/null +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -0,0 +1,249 @@ +/* + * linux/arch/arm/mm/proc-arm7tdmi.S: utility functions for ARM7TDMI + * + * Copyright (C) 2003-2006 Hyok S. Choi <hyok.choi@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/asm-offsets.h> +#include <asm/pgtable-hwdef.h> +#include <asm/pgtable.h> +#include <asm/procinfo.h> +#include <asm/ptrace.h> + + .text +/* + * cpu_arm7tdmi_proc_init() + * cpu_arm7tdmi_do_idle() + * cpu_arm7tdmi_dcache_clean_area() + * cpu_arm7tdmi_switch_mm() + * + * These are not required. + */ +ENTRY(cpu_arm7tdmi_proc_init) +ENTRY(cpu_arm7tdmi_do_idle) +ENTRY(cpu_arm7tdmi_dcache_clean_area) +ENTRY(cpu_arm7tdmi_switch_mm) + mov pc, lr + +/* + * cpu_arm7tdmi_proc_fin() + */ +ENTRY(cpu_arm7tdmi_proc_fin) + mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE + msr cpsr_c, r0 + mov pc, lr + +/* + * Function: cpu_arm7tdmi_reset(loc) + * Params : loc(r0) address to jump to + * Purpose : Sets up everything for a reset and jump to the location for soft reset. + */ +ENTRY(cpu_arm7tdmi_reset) + mov pc, r0 + + __INIT + + .type __arm7tdmi_setup, #function +__arm7tdmi_setup: + mov pc, lr + .size __arm7tdmi_setup, . - __arm7tdmi_setup + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + .type arm7tdmi_processor_functions, #object +ENTRY(arm7tdmi_processor_functions) + .word v4t_late_abort + .word cpu_arm7tdmi_proc_init + .word cpu_arm7tdmi_proc_fin + .word cpu_arm7tdmi_reset + .word cpu_arm7tdmi_do_idle + .word cpu_arm7tdmi_dcache_clean_area + .word cpu_arm7tdmi_switch_mm + .word 0 @ cpu_*_set_pte + .size arm7tdmi_processor_functions, . - arm7tdmi_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv4t" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v4" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_arm7tdmi_name, #object +cpu_arm7tdmi_name: + .asciz "ARM7TDMI" + .size cpu_arm7tdmi_name, . - cpu_arm7tdmi_name + + .type cpu_triscenda7_name, #object +cpu_triscenda7_name: + .asciz "Triscend-A7x" + .size cpu_triscenda7_name, . - cpu_triscenda7_name + + .type cpu_at91_name, #object +cpu_at91_name: + .asciz "Atmel-AT91M40xxx" + .size cpu_at91_name, . - cpu_at91_name + + .type cpu_s3c3410_name, #object +cpu_s3c3410_name: + .asciz "Samsung-S3C3410" + .size cpu_s3c3410_name, . - cpu_s3c3410_name + + .type cpu_s3c44b0x_name, #object +cpu_s3c44b0x_name: + .asciz "Samsung-S3C44B0x" + .size cpu_s3c44b0x_name, . - cpu_s3c44b0x_name + + .type cpu_s3c4510b, #object +cpu_s3c4510b_name: + .asciz "Samsung-S3C4510B" + .size cpu_s3c4510b_name, . - cpu_s3c4510b_name + + .type cpu_s3c4530_name, #object +cpu_s3c4530_name: + .asciz "Samsung-S3C4530" + .size cpu_s3c4530_name, . - cpu_s3c4530_name + + .type cpu_netarm_name, #object +cpu_netarm_name: + .asciz "NETARM" + .size cpu_netarm_name, . - cpu_netarm_name + + .align + + .section ".proc.info.init", #alloc, #execinstr + + .type __arm7tdmi_proc_info, #object +__arm7tdmi_proc_info: + .long 0x41007700 + .long 0xfff8ff00 + .long 0 + .long 0 + b __arm7tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_26BIT + .long cpu_arm7tdmi_name + .long arm7tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __arm7tdmi_proc_info, . - __arm7dmi_proc_info + + .type __triscenda7_proc_info, #object +__triscenda7_proc_info: + .long 0x0001d2ff + .long 0x0001ffff + .long 0 + .long 0 + b __arm7tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT + .long cpu_triscenda7_name + .long arm7tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __triscenda7_proc_info, . - __triscenda7_proc_info + + .type __at91_proc_info, #object +__at91_proc_info: + .long 0x14000040 + .long 0xfff000e0 + .long 0 + .long 0 + b __arm7tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT + .long cpu_at91_name + .long arm7tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __at91_proc_info, . - __at91_proc_info + + .type __s3c4510b_proc_info, #object +__s3c4510b_proc_info: + .long 0x36365000 + .long 0xfffff000 + .long 0 + .long 0 + b __arm7tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT + .long cpu_s3c4510b_name + .long arm7tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __s3c4510b_proc_info, . - __s3c4510b_proc_info + + .type __s3c4530_proc_info, #object +__s3c4530_proc_info: + .long 0x4c000000 + .long 0xfff000e0 + .long 0 + .long 0 + b __arm7tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT + .long cpu_s3c4530_name + .long arm7tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __s3c4530_proc_info, . - __s3c4530_proc_info + + .type __s3c3410_proc_info, #object +__s3c3410_proc_info: + .long 0x34100000 + .long 0xffff0000 + .long 0 + .long 0 + b __arm7tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT + .long cpu_s3c3410_name + .long arm7tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __s3c3410_proc_info, . - __s3c3410_proc_info + + .type __s3c44b0x_proc_info, #object +__s3c44b0x_proc_info: + .long 0x44b00000 + .long 0xffff0000 + .long 0 + .long 0 + b __arm7tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT + .long cpu_s3c44b0x_name + .long arm7tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __s3c44b0x_proc_info, . - __s3c44b0x_proc_info diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S new file mode 100644 index 000000000000..2397f4b6e151 --- /dev/null +++ b/arch/arm/mm/proc-arm940.S @@ -0,0 +1,369 @@ +/* + * linux/arch/arm/mm/arm940.S: utility functions for ARM940T + * + * Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/pgtable-hwdef.h> +#include <asm/pgtable.h> +#include <asm/procinfo.h> +#include <asm/ptrace.h> + +/* ARM940T has a 4KB DCache comprising 256 lines of 4 words */ +#define CACHE_DLINESIZE 16 +#define CACHE_DSEGMENTS 4 +#define CACHE_DENTRIES 64 + + .text +/* + * cpu_arm940_proc_init() + * cpu_arm940_switch_mm() + * + * These are not required. + */ +ENTRY(cpu_arm940_proc_init) +ENTRY(cpu_arm940_switch_mm) + mov pc, lr + +/* + * cpu_arm940_proc_fin() + */ +ENTRY(cpu_arm940_proc_fin) + stmfd sp!, {lr} + mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE + msr cpsr_c, ip + bl arm940_flush_kern_cache_all + mrc p15, 0, r0, c1, c0, 0 @ ctrl register + bic r0, r0, #0x00001000 @ i-cache + bic r0, r0, #0x00000004 @ d-cache + mcr p15, 0, r0, c1, c0, 0 @ disable caches + ldmfd sp!, {pc} + +/* + * cpu_arm940_reset(loc) + * Params : r0 = address to jump to + * Notes : This sets up everything for a reset + */ +ENTRY(cpu_arm940_reset) + mov ip, #0 + mcr p15, 0, ip, c7, c5, 0 @ flush I cache + mcr p15, 0, ip, c7, c6, 0 @ flush D cache + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mrc p15, 0, ip, c1, c0, 0 @ ctrl register + bic ip, ip, #0x00000005 @ .............c.p + bic ip, ip, #0x00001000 @ i-cache + mcr p15, 0, ip, c1, c0, 0 @ ctrl register + mov pc, r0 + +/* + * cpu_arm940_do_idle() + */ + .align 5 +ENTRY(cpu_arm940_do_idle) + mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt + mov pc, lr + +/* + * flush_user_cache_all() + */ +ENTRY(arm940_flush_user_cache_all) + /* FALLTHROUGH */ + +/* + * flush_kern_cache_all() + * + * Clean and invalidate the entire cache. + */ +ENTRY(arm940_flush_kern_cache_all) + mov r2, #VM_EXEC + /* FALLTHROUGH */ + +/* + * flush_user_cache_range(start, end, flags) + * + * There is no efficient way to flush a range of cache entries + * in the specified address range. Thus, flushes all. + * + * - start - start address (inclusive) + * - end - end address (exclusive) + * - flags - vm_flags describing address space + */ +ENTRY(arm940_flush_user_cache_range) + mov ip, #0 +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, ip, c7, c6, 0 @ flush D cache +#else + mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments +1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries +2: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index + subs r3, r3, #1 << 26 + bcs 2b @ entries 63 to 0 + subs r1, r1, #1 << 4 + bcs 1b @ segments 3 to 0 +#endif + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache + mcrne p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * coherent_kern_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm940_coherent_kern_range) + /* FALLTHROUGH */ + +/* + * coherent_user_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm940_coherent_user_range) + /* FALLTHROUGH */ + +/* + * flush_kern_dcache_page(void *page) + * + * Ensure no D cache aliasing occurs, either with itself or + * the I cache + * + * - addr - page aligned address + */ +ENTRY(arm940_flush_kern_dcache_page) + mov ip, #0 + mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments +1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries +2: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index + subs r3, r3, #1 << 26 + bcs 2b @ entries 63 to 0 + subs r1, r1, #1 << 4 + bcs 1b @ segments 7 to 0 + mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_inv_range(start, end) + * + * There is no efficient way to invalidate a specifid virtual + * address range. Thus, invalidates all. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm940_dma_inv_range) + mov ip, #0 + mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments +1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries +2: mcr p15, 0, r3, c7, c6, 2 @ flush D entry + subs r3, r3, #1 << 26 + bcs 2b @ entries 63 to 0 + subs r1, r1, #1 << 4 + bcs 1b @ segments 7 to 0 + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_clean_range(start, end) + * + * There is no efficient way to clean a specifid virtual + * address range. Thus, cleans all. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm940_dma_clean_range) +ENTRY(cpu_arm940_dcache_clean_area) + mov ip, #0 +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments +1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries +2: mcr p15, 0, r3, c7, c10, 2 @ clean D entry + subs r3, r3, #1 << 26 + bcs 2b @ entries 63 to 0 + subs r1, r1, #1 << 4 + bcs 1b @ segments 7 to 0 +#endif + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_flush_range(start, end) + * + * There is no efficient way to clean and invalidate a specifid + * virtual address range. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm940_dma_flush_range) + mov ip, #0 + mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments +1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries +2: +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, r3, c7, c14, 2 @ clean/flush D entry +#else + mcr p15, 0, r3, c7, c10, 2 @ clean D entry +#endif + subs r3, r3, #1 << 26 + bcs 2b @ entries 63 to 0 + subs r1, r1, #1 << 4 + bcs 1b @ segments 7 to 0 + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +ENTRY(arm940_cache_fns) + .long arm940_flush_kern_cache_all + .long arm940_flush_user_cache_all + .long arm940_flush_user_cache_range + .long arm940_coherent_kern_range + .long arm940_coherent_user_range + .long arm940_flush_kern_dcache_page + .long arm940_dma_inv_range + .long arm940_dma_clean_range + .long arm940_dma_flush_range + + __INIT + + .type __arm940_setup, #function +__arm940_setup: + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 0, r0, c7, c6, 0 @ invalidate D cache + mcr p15, 0, r0, c7, c10, 4 @ drain WB + + mcr p15, 0, r0, c6, c3, 0 @ disable data area 3~7 + mcr p15, 0, r0, c6, c4, 0 + mcr p15, 0, r0, c6, c5, 0 + mcr p15, 0, r0, c6, c6, 0 + mcr p15, 0, r0, c6, c7, 0 + + mcr p15, 0, r0, c6, c3, 1 @ disable instruction area 3~7 + mcr p15, 0, r0, c6, c4, 1 + mcr p15, 0, r0, c6, c5, 1 + mcr p15, 0, r0, c6, c6, 1 + mcr p15, 0, r0, c6, c7, 1 + + mov r0, #0x0000003F @ base = 0, size = 4GB + mcr p15, 0, r0, c6, c0, 0 @ set area 0, default + mcr p15, 0, r0, c6, c0, 1 + + ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM + ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB) + mov r2, #10 @ 11 is the minimum (4KB) +1: add r2, r2, #1 @ area size *= 2 + mov r1, r1, lsr #1 + bne 1b @ count not zero r-shift + orr r0, r0, r2, lsl #1 @ the area register value + orr r0, r0, #1 @ set enable bit + mcr p15, 0, r0, c6, c1, 0 @ set area 1, RAM + mcr p15, 0, r0, c6, c1, 1 + + ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH + ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB) + mov r2, #10 @ 11 is the minimum (4KB) +1: add r2, r2, #1 @ area size *= 2 + mov r1, r1, lsr #1 + bne 1b @ count not zero r-shift + orr r0, r0, r2, lsl #1 @ the area register value + orr r0, r0, #1 @ set enable bit + mcr p15, 0, r0, c6, c2, 0 @ set area 2, ROM/FLASH + mcr p15, 0, r0, c6, c2, 1 + + mov r0, #0x06 + mcr p15, 0, r0, c2, c0, 0 @ Region 1&2 cacheable + mcr p15, 0, r0, c2, c0, 1 +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mov r0, #0x00 @ disable whole write buffer +#else + mov r0, #0x02 @ Region 1 write bufferred +#endif + mcr p15, 0, r0, c3, c0, 0 + + mov r0, #0x10000 + sub r0, r0, #1 @ r0 = 0xffff + mcr p15, 0, r0, c5, c0, 0 @ all read/write access + mcr p15, 0, r0, c5, c0, 1 + + mrc p15, 0, r0, c1, c0 @ get control register + orr r0, r0, #0x00001000 @ I-cache + orr r0, r0, #0x00000005 @ MPU/D-cache + + mov pc, lr + + .size __arm940_setup, . - __arm940_setup + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + .type arm940_processor_functions, #object +ENTRY(arm940_processor_functions) + .word nommu_early_abort + .word cpu_arm940_proc_init + .word cpu_arm940_proc_fin + .word cpu_arm940_reset + .word cpu_arm940_do_idle + .word cpu_arm940_dcache_clean_area + .word cpu_arm940_switch_mm + .word 0 @ cpu_*_set_pte + .size arm940_processor_functions, . - arm940_processor_functions + + .section ".rodata" + +.type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv4t" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v4" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_arm940_name, #object +cpu_arm940_name: + .ascii "ARM940T" + .size cpu_arm940_name, . - cpu_arm940_name + + .align + + .section ".proc.info.init", #alloc, #execinstr + + .type __arm940_proc_info,#object +__arm940_proc_info: + .long 0x41009400 + .long 0xff00fff0 + .long 0 + b __arm940_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB + .long cpu_arm940_name + .long arm940_processor_functions + .long 0 + .long 0 + .long arm940_cache_fns + .size __arm940_proc_info, . - __arm940_proc_info + diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S new file mode 100644 index 000000000000..e18617564421 --- /dev/null +++ b/arch/arm/mm/proc-arm946.S @@ -0,0 +1,424 @@ +/* + * linux/arch/arm/mm/arm946.S: utility functions for ARM946E-S + * + * Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com) + * + * (Many of cache codes are from proc-arm926.S) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/pgtable-hwdef.h> +#include <asm/pgtable.h> +#include <asm/procinfo.h> +#include <asm/ptrace.h> + +/* + * ARM946E-S is synthesizable to have 0KB to 1MB sized D-Cache, + * comprising 256 lines of 32 bytes (8 words). + */ +#define CACHE_DSIZE (CONFIG_CPU_DCACHE_SIZE) /* typically 8KB. */ +#define CACHE_DLINESIZE 32 /* fixed */ +#define CACHE_DSEGMENTS 4 /* fixed */ +#define CACHE_DENTRIES (CACHE_DSIZE / CACHE_DSEGMENTS / CACHE_DLINESIZE) +#define CACHE_DLIMIT (CACHE_DSIZE * 4) /* benchmark needed */ + + .text +/* + * cpu_arm946_proc_init() + * cpu_arm946_switch_mm() + * + * These are not required. + */ +ENTRY(cpu_arm946_proc_init) +ENTRY(cpu_arm946_switch_mm) + mov pc, lr + +/* + * cpu_arm946_proc_fin() + */ +ENTRY(cpu_arm946_proc_fin) + stmfd sp!, {lr} + mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE + msr cpsr_c, ip + bl arm946_flush_kern_cache_all + mrc p15, 0, r0, c1, c0, 0 @ ctrl register + bic r0, r0, #0x00001000 @ i-cache + bic r0, r0, #0x00000004 @ d-cache + mcr p15, 0, r0, c1, c0, 0 @ disable caches + ldmfd sp!, {pc} + +/* + * cpu_arm946_reset(loc) + * Params : r0 = address to jump to + * Notes : This sets up everything for a reset + */ +ENTRY(cpu_arm946_reset) + mov ip, #0 + mcr p15, 0, ip, c7, c5, 0 @ flush I cache + mcr p15, 0, ip, c7, c6, 0 @ flush D cache + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mrc p15, 0, ip, c1, c0, 0 @ ctrl register + bic ip, ip, #0x00000005 @ .............c.p + bic ip, ip, #0x00001000 @ i-cache + mcr p15, 0, ip, c1, c0, 0 @ ctrl register + mov pc, r0 + +/* + * cpu_arm946_do_idle() + */ + .align 5 +ENTRY(cpu_arm946_do_idle) + mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt + mov pc, lr + +/* + * flush_user_cache_all() + */ +ENTRY(arm946_flush_user_cache_all) + /* FALLTHROUGH */ + +/* + * flush_kern_cache_all() + * + * Clean and invalidate the entire cache. + */ +ENTRY(arm946_flush_kern_cache_all) + mov r2, #VM_EXEC + mov ip, #0 +__flush_whole_cache: +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, ip, c7, c6, 0 @ flush D cache +#else + mov r1, #(CACHE_DSEGMENTS - 1) << 29 @ 4 segments +1: orr r3, r1, #(CACHE_DENTRIES - 1) << 4 @ n entries +2: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index + subs r3, r3, #1 << 4 + bcs 2b @ entries n to 0 + subs r1, r1, #1 << 29 + bcs 1b @ segments 3 to 0 +#endif + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c5, 0 @ flush I cache + mcrne p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * flush_user_cache_range(start, end, flags) + * + * Clean and invalidate a range of cache entries in the + * specified address range. + * + * - start - start address (inclusive) + * - end - end address (exclusive) + * - flags - vm_flags describing address space + * (same as arm926) + */ +ENTRY(arm946_flush_user_cache_range) + mov ip, #0 + sub r3, r1, r0 @ calculate total size + cmp r3, #CACHE_DLIMIT + bhs __flush_whole_cache + +1: tst r2, #VM_EXEC +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE + mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE +#else + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE +#endif + cmp r0, r1 + blo 1b + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * coherent_kern_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm946_coherent_kern_range) + /* FALLTHROUGH */ + +/* + * coherent_user_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + * (same as arm926) + */ +ENTRY(arm946_coherent_user_range) + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * flush_kern_dcache_page(void *page) + * + * Ensure no D cache aliasing occurs, either with itself or + * the I cache + * + * - addr - page aligned address + * (same as arm926) + */ +ENTRY(arm946_flush_kern_dcache_page) + add r1, r0, #PAGE_SZ +1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_inv_range(start, end) + * + * Invalidate (discard) the specified virtual address range. + * May not write back any entries. If 'start' or 'end' + * are not cache line aligned, those lines must be written + * back. + * + * - start - virtual start address + * - end - virtual end address + * (same as arm926) + */ +ENTRY(arm946_dma_inv_range) +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + tst r0, #CACHE_DLINESIZE - 1 + mcrne p15, 0, r0, c7, c10, 1 @ clean D entry + tst r1, #CACHE_DLINESIZE - 1 + mcrne p15, 0, r1, c7, c10, 1 @ clean D entry +#endif + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_clean_range(start, end) + * + * Clean the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + * + * (same as arm926) + */ +ENTRY(arm946_dma_clean_range) +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b +#endif + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_flush_range(start, end) + * + * Clean and invalidate the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + * + * (same as arm926) + */ +ENTRY(arm946_dma_flush_range) + bic r0, r0, #CACHE_DLINESIZE - 1 +1: +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry +#else + mcr p15, 0, r0, c7, c10, 1 @ clean D entry +#endif + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +ENTRY(arm946_cache_fns) + .long arm946_flush_kern_cache_all + .long arm946_flush_user_cache_all + .long arm946_flush_user_cache_range + .long arm946_coherent_kern_range + .long arm946_coherent_user_range + .long arm946_flush_kern_dcache_page + .long arm946_dma_inv_range + .long arm946_dma_clean_range + .long arm946_dma_flush_range + + +ENTRY(cpu_arm946_dcache_clean_area) +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHE_DLINESIZE + subs r1, r1, #CACHE_DLINESIZE + bhi 1b +#endif + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + + __INIT + + .type __arm946_setup, #function +__arm946_setup: + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 0, r0, c7, c6, 0 @ invalidate D cache + mcr p15, 0, r0, c7, c10, 4 @ drain WB + + mcr p15, 0, r0, c6, c3, 0 @ disable memory region 3~7 + mcr p15, 0, r0, c6, c4, 0 + mcr p15, 0, r0, c6, c5, 0 + mcr p15, 0, r0, c6, c6, 0 + mcr p15, 0, r0, c6, c7, 0 + + mov r0, #0x0000003F @ base = 0, size = 4GB + mcr p15, 0, r0, c6, c0, 0 @ set region 0, default + + ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM + ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB) + mov r2, #10 @ 11 is the minimum (4KB) +1: add r2, r2, #1 @ area size *= 2 + mov r1, r1, lsr #1 + bne 1b @ count not zero r-shift + orr r0, r0, r2, lsl #1 @ the region register value + orr r0, r0, #1 @ set enable bit + mcr p15, 0, r0, c6, c1, 0 @ set region 1, RAM + + ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH + ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB) + mov r2, #10 @ 11 is the minimum (4KB) +1: add r2, r2, #1 @ area size *= 2 + mov r1, r1, lsr #1 + bne 1b @ count not zero r-shift + orr r0, r0, r2, lsl #1 @ the region register value + orr r0, r0, #1 @ set enable bit + mcr p15, 0, r0, c6, c2, 0 @ set region 2, ROM/FLASH + + mov r0, #0x06 + mcr p15, 0, r0, c2, c0, 0 @ region 1,2 d-cacheable + mcr p15, 0, r0, c2, c0, 1 @ region 1,2 i-cacheable +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mov r0, #0x00 @ disable whole write buffer +#else + mov r0, #0x02 @ region 1 write bufferred +#endif + mcr p15, 0, r0, c3, c0, 0 + +/* + * Access Permission Settings for future permission control by PU. + * + * priv. user + * region 0 (whole) rw -- : b0001 + * region 1 (RAM) rw rw : b0011 + * region 2 (FLASH) rw r- : b0010 + * region 3~7 (none) -- -- : b0000 + */ + mov r0, #0x00000031 + orr r0, r0, #0x00000200 + mcr p15, 0, r0, c5, c0, 2 @ set data access permission + mcr p15, 0, r0, c5, c0, 3 @ set inst. access permission + + mrc p15, 0, r0, c1, c0 @ get control register + orr r0, r0, #0x00001000 @ I-cache + orr r0, r0, #0x00000005 @ MPU/D-cache +#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN + orr r0, r0, #0x00004000 @ .1.. .... .... .... +#endif + mov pc, lr + + .size __arm946_setup, . - __arm946_setup + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + .type arm946_processor_functions, #object +ENTRY(arm946_processor_functions) + .word nommu_early_abort + .word cpu_arm946_proc_init + .word cpu_arm946_proc_fin + .word cpu_arm946_reset + .word cpu_arm946_do_idle + + .word cpu_arm946_dcache_clean_area + .word cpu_arm946_switch_mm + .word 0 @ cpu_*_set_pte + .size arm946_processor_functions, . - arm946_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv5te" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v5t" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_arm946_name, #object +cpu_arm946_name: + .ascii "ARM946E-S" + .size cpu_arm946_name, . - cpu_arm946_name + + .align + + .section ".proc.info.init", #alloc, #execinstr + .type __arm946_proc_info,#object +__arm946_proc_info: + .long 0x41009460 + .long 0xff00fff0 + .long 0 + b __arm946_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB + .long cpu_arm946_name + .long arm946_processor_functions + .long 0 + .long 0 + .long arm940_cache_fns + .size __arm946_proc_info, . - __arm946_proc_info + diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S new file mode 100644 index 000000000000..918ebf65d4f6 --- /dev/null +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -0,0 +1,134 @@ +/* + * linux/arch/arm/mm/proc-arm9tdmi.S: utility functions for ARM9TDMI + * + * Copyright (C) 2003-2006 Hyok S. Choi <hyok.choi@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/asm-offsets.h> +#include <asm/pgtable-hwdef.h> +#include <asm/pgtable.h> +#include <asm/procinfo.h> +#include <asm/ptrace.h> + + .text +/* + * cpu_arm9tdmi_proc_init() + * cpu_arm9tdmi_do_idle() + * cpu_arm9tdmi_dcache_clean_area() + * cpu_arm9tdmi_switch_mm() + * + * These are not required. + */ +ENTRY(cpu_arm9tdmi_proc_init) +ENTRY(cpu_arm9tdmi_do_idle) +ENTRY(cpu_arm9tdmi_dcache_clean_area) +ENTRY(cpu_arm9tdmi_switch_mm) + mov pc, lr + +/* + * cpu_arm9tdmi_proc_fin() + */ +ENTRY(cpu_arm9tdmi_proc_fin) + mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE + msr cpsr_c, r0 + mov pc, lr + +/* + * Function: cpu_arm9tdmi_reset(loc) + * Params : loc(r0) address to jump to + * Purpose : Sets up everything for a reset and jump to the location for soft reset. + */ +ENTRY(cpu_arm9tdmi_reset) + mov pc, r0 + + __INIT + + .type __arm9tdmi_setup, #function +__arm9tdmi_setup: + mov pc, lr + .size __arm9tdmi_setup, . - __arm9tdmi_setup + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + .type arm9tdmi_processor_functions, #object +ENTRY(arm9tdmi_processor_functions) + .word nommu_early_abort + .word cpu_arm9tdmi_proc_init + .word cpu_arm9tdmi_proc_fin + .word cpu_arm9tdmi_reset + .word cpu_arm9tdmi_do_idle + .word cpu_arm9tdmi_dcache_clean_area + .word cpu_arm9tdmi_switch_mm + .word 0 @ cpu_*_set_pte + .size arm9tdmi_processor_functions, . - arm9tdmi_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv4t" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v4" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_arm9tdmi_name, #object +cpu_arm9tdmi_name: + .asciz "ARM9TDMI" + .size cpu_arm9tdmi_name, . - cpu_arm9tdmi_name + + .type cpu_p2001_name, #object +cpu_p2001_name: + .asciz "P2001" + .size cpu_p2001_name, . - cpu_p2001_name + + .align + + .section ".proc.info.init", #alloc, #execinstr + + .type __arm9tdmi_proc_info, #object +__arm9tdmi_proc_info: + .long 0x41009900 + .long 0xfff8ff00 + .long 0 + .long 0 + b __arm9tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT + .long cpu_arm9tdmi_name + .long arm9tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __arm9tdmi_proc_info, . - __arm9dmi_proc_info + + .type __p2001_proc_info, #object +__p2001_proc_info: + .long 0x41029000 + .long 0xffffffff + .long 0 + .long 0 + b __arm9tdmi_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT + .long cpu_p2001_name + .long arm9tdmi_processor_functions + .long 0 + .long 0 + .long v4_cache_fns + .size __p2001_proc_info, . - __p2001_proc_info diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 3ca0c92e98a2..e8b377d637f6 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -311,12 +311,6 @@ ENTRY(xscale_flush_kern_dcache_page) * - end - virtual end address */ ENTRY(xscale_dma_inv_range) - mrc p15, 0, r2, c0, c0, 0 @ read ID - eor r2, r2, #0x69000000 - eor r2, r2, #0x00052000 - bics r2, r2, #1 - beq xscale_dma_flush_range - tst r0, #CACHELINESIZE - 1 bic r0, r0, #CACHELINESIZE - 1 mcrne p15, 0, r0, c7, c10, 1 @ clean D entry @@ -375,6 +369,30 @@ ENTRY(xscale_cache_fns) .long xscale_dma_clean_range .long xscale_dma_flush_range +/* + * On stepping A0/A1 of the 80200, invalidating D-cache by line doesn't + * clear the dirty bits, which means that if we invalidate a dirty line, + * the dirty data can still be written back to external memory later on. + * + * The recommended workaround is to always do a clean D-cache line before + * doing an invalidate D-cache line, so on the affected processors, + * dma_inv_range() is implemented as dma_flush_range(). + * + * See erratum #25 of "Intel 80200 Processor Specification Update", + * revision January 22, 2003, available at: + * http://www.intel.com/design/iio/specupdt/273415.htm + */ +ENTRY(xscale_80200_A0_A1_cache_fns) + .long xscale_flush_kern_cache_all + .long xscale_flush_user_cache_all + .long xscale_flush_user_cache_range + .long xscale_coherent_kern_range + .long xscale_coherent_user_range + .long xscale_flush_kern_dcache_page + .long xscale_dma_flush_range + .long xscale_dma_clean_range + .long xscale_dma_flush_range + ENTRY(cpu_xscale_dcache_clean_area) 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #CACHELINESIZE @@ -531,6 +549,11 @@ cpu_elf_name: .asciz "v5" .size cpu_elf_name, . - cpu_elf_name + .type cpu_80200_A0_A1_name, #object +cpu_80200_A0_A1_name: + .asciz "XScale-80200 A0/A1" + .size cpu_80200_A0_A1_name, . - cpu_80200_A0_A1_name + .type cpu_80200_name, #object cpu_80200_name: .asciz "XScale-80200" @@ -595,6 +618,29 @@ cpu_pxa270_name: .section ".proc.info.init", #alloc, #execinstr + .type __80200_A0_A1_proc_info,#object +__80200_A0_A1_proc_info: + .long 0x69052000 + .long 0xfffffffe + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + .long PMD_TYPE_SECT | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __xscale_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_80200_name + .long xscale_processor_functions + .long v4wbi_tlb_fns + .long xscale_mc_user_fns + .long xscale_80200_A0_A1_cache_fns + .size __80200_A0_A1_proc_info, . - __80200_A0_A1_proc_info + .type __80200_proc_info,#object __80200_proc_info: .long 0x69052000 diff --git a/arch/arm/oprofile/op_model_xscale.c b/arch/arm/oprofile/op_model_xscale.c index 34fdc733743b..6576143f2559 100644 --- a/arch/arm/oprofile/op_model_xscale.c +++ b/arch/arm/oprofile/op_model_xscale.c @@ -36,11 +36,11 @@ #ifdef CONFIG_ARCH_IOP310 #define XSCALE_PMU_IRQ IRQ_XS80200_PMU #endif -#ifdef CONFIG_ARCH_IOP321 -#define XSCALE_PMU_IRQ IRQ_IOP321_CORE_PMU +#ifdef CONFIG_ARCH_IOP32X +#define XSCALE_PMU_IRQ IRQ_IOP32X_CORE_PMU #endif -#ifdef CONFIG_ARCH_IOP331 -#define XSCALE_PMU_IRQ IRQ_IOP331_CORE_PMU +#ifdef CONFIG_ARCH_IOP33X +#define XSCALE_PMU_IRQ IRQ_IOP33X_CORE_PMU #endif #ifdef CONFIG_ARCH_PXA #define XSCALE_PMU_IRQ IRQ_PMU @@ -88,7 +88,7 @@ static struct pmu_counter results[MAX_COUNTERS]; /* * There are two versions of the PMU in current XScale processors * with differing register layouts and number of performance counters. - * e.g. IOP321 is xsc1 whilst IOP331 is xsc2. + * e.g. IOP32x is xsc1 whilst IOP33x is xsc2. * We detect which register layout to use in xscale_detect_pmu() */ enum { PMU_XSC1, PMU_XSC2 }; diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile new file mode 100644 index 000000000000..23da00b11517 --- /dev/null +++ b/arch/arm/plat-iop/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the linux kernel. +# + +obj-y := gpio.o i2c.o pci.o setup.o time.o +obj-m := +obj-n := +obj- := diff --git a/arch/arm/plat-iop/gpio.c b/arch/arm/plat-iop/gpio.c new file mode 100644 index 000000000000..eda436083417 --- /dev/null +++ b/arch/arm/plat-iop/gpio.c @@ -0,0 +1,48 @@ +/* + * arch/arm/plat-iop/gpio.c + * GPIO handling for Intel IOP3xx processors. + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/device.h> +#include <asm/hardware/iop3xx.h> + +void gpio_line_config(int line, int direction) +{ + unsigned long flags; + + local_irq_save(flags); + if (direction == GPIO_IN) { + *IOP3XX_GPOE |= 1 << line; + } else if (direction == GPIO_OUT) { + *IOP3XX_GPOE &= ~(1 << line); + } + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_line_config); + +int gpio_line_get(int line) +{ + return !!(*IOP3XX_GPID & (1 << line)); +} +EXPORT_SYMBOL(gpio_line_get); + +void gpio_line_set(int line, int value) +{ + unsigned long flags; + + local_irq_save(flags); + if (value == GPIO_LOW) { + *IOP3XX_GPOD &= ~(1 << line); + } else if (value == GPIO_HIGH) { + *IOP3XX_GPOD |= 1 << line; + } + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_line_set); diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c new file mode 100644 index 000000000000..e99909bdba71 --- /dev/null +++ b/arch/arm/plat-iop/i2c.c @@ -0,0 +1,81 @@ +/* + * arch/arm/plat-iop/i2c.c + * + * Author: Nicolas Pitre <nico@cam.org> + * Copyright (C) 2001 MontaVista Software, Inc. + * Copyright (C) 2004 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/major.h> +#include <linux/fs.h> +#include <linux/platform_device.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_core.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/system.h> +#include <asm/memory.h> +#include <asm/hardware.h> +#include <asm/hardware/iop3xx.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#ifdef CONFIG_ARCH_IOP32X +#define IRQ_IOP3XX_I2C_0 IRQ_IOP32X_I2C_0 +#define IRQ_IOP3XX_I2C_1 IRQ_IOP32X_I2C_1 +#endif +#ifdef CONFIG_ARCH_IOP33X +#define IRQ_IOP3XX_I2C_0 IRQ_IOP33X_I2C_0 +#define IRQ_IOP3XX_I2C_1 IRQ_IOP33X_I2C_1 +#endif + +static struct resource iop3xx_i2c0_resources[] = { + [0] = { + .start = 0xfffff680, + .end = 0xfffff697, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP3XX_I2C_0, + .end = IRQ_IOP3XX_I2C_0, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device iop3xx_i2c0_device = { + .name = "IOP3xx-I2C", + .id = 0, + .num_resources = 2, + .resource = iop3xx_i2c0_resources, +}; + + +static struct resource iop3xx_i2c1_resources[] = { + [0] = { + .start = 0xfffff6a0, + .end = 0xfffff6b7, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP3XX_I2C_1, + .end = IRQ_IOP3XX_I2C_1, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device iop3xx_i2c1_device = { + .name = "IOP3xx-I2C", + .id = 1, + .num_resources = 2, + .resource = iop3xx_i2c1_resources, +}; diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c new file mode 100644 index 000000000000..e647812654f2 --- /dev/null +++ b/arch/arm/plat-iop/pci.c @@ -0,0 +1,247 @@ +/* + * arch/arm/plat-iop/pci.c + * + * PCI support for the Intel IOP32X and IOP33X processors + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/hardware.h> +#include <asm/mach/pci.h> +#include <asm/hardware/iop3xx.h> + +// #define DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) do { } while (0) +#endif + +/* + * This routine builds either a type0 or type1 configuration command. If the + * bus is on the 803xx then a type0 made, else a type1 is created. + */ +static u32 iop3xx_cfg_address(struct pci_bus *bus, int devfn, int where) +{ + struct pci_sys_data *sys = bus->sysdata; + u32 addr; + + if (sys->busnr == bus->number) + addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); + else + addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; + + addr |= PCI_FUNC(devfn) << 8 | (where & ~3); + + return addr; +} + +/* + * This routine checks the status of the last configuration cycle. If an error + * was detected it returns a 1, else it returns a 0. The errors being checked + * are parity, master abort, target abort (master and target). These types of + * errors occure during a config cycle where there is no device, like during + * the discovery stage. + */ +static int iop3xx_pci_status(void) +{ + unsigned int status; + int ret = 0; + + /* + * Check the status registers. + */ + status = *IOP3XX_ATUSR; + if (status & 0xf900) { + DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); + *IOP3XX_ATUSR = status & 0xf900; + ret = 1; + } + + status = *IOP3XX_ATUISR; + if (status & 0x679f) { + DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); + *IOP3XX_ATUISR = status & 0x679f; + ret = 1; + } + + return ret; +} + +/* + * Simply write the address register and read the configuration + * data. Note that the 4 nop's ensure that we are able to handle + * a delayed abort (in theory.) + */ +static inline u32 iop3xx_read(unsigned long addr) +{ + u32 val; + + __asm__ __volatile__( + "str %1, [%2]\n\t" + "ldr %0, [%3]\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : "=r" (val) + : "r" (addr), "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR)); + + return val; +} + +/* + * The read routines must check the error status of the last configuration + * cycle. If there was an error, the routine returns all hex f's. + */ +static int +iop3xx_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *value) +{ + unsigned long addr = iop3xx_cfg_address(bus, devfn, where); + u32 val = iop3xx_read(addr) >> ((where & 3) * 8); + + if (iop3xx_pci_status()) + val = 0xffffffff; + + *value = val; + + return PCIBIOS_SUCCESSFUL; +} + +static int +iop3xx_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 value) +{ + unsigned long addr = iop3xx_cfg_address(bus, devfn, where); + u32 val; + + if (size != 4) { + val = iop3xx_read(addr); + if (iop3xx_pci_status()) + return PCIBIOS_SUCCESSFUL; + + where = (where & 3) * 8; + + if (size == 1) + val &= ~(0xff << where); + else + val &= ~(0xffff << where); + + *IOP3XX_OCCDR = val | value << where; + } else { + asm volatile( + "str %1, [%2]\n\t" + "str %0, [%3]\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : + : "r" (value), "r" (addr), + "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR)); + } + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops iop3xx_ops = { + .read = iop3xx_read_config, + .write = iop3xx_write_config, +}; + +/* + * When a PCI device does not exist during config cycles, the 80200 gets a + * bus error instead of returning 0xffffffff. This handler simply returns. + */ +static int +iop3xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) +{ + DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", + addr, fsr, regs->ARM_pc, regs->ARM_lr); + + /* + * If it was an imprecise abort, then we need to correct the + * return address to be _after_ the instruction. + */ + if (fsr & (1 << 10)) + regs->ARM_pc += 4; + + return 0; +} + +int iop3xx_pci_setup(int nr, struct pci_sys_data *sys) +{ + struct resource *res; + + if (nr != 0) + return 0; + + res = kzalloc(2 * sizeof(struct resource), GFP_KERNEL); + if (!res) + panic("PCI: unable to alloc resources"); + + res[0].start = IOP3XX_PCI_LOWER_IO_VA; + res[0].end = IOP3XX_PCI_LOWER_IO_VA + IOP3XX_PCI_IO_WINDOW_SIZE - 1; + res[0].name = "IOP3XX PCI I/O Space"; + res[0].flags = IORESOURCE_IO; + request_resource(&ioport_resource, &res[0]); + + res[1].start = IOP3XX_PCI_LOWER_MEM_PA; + res[1].end = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1; + res[1].name = "IOP3XX PCI Memory Space"; + res[1].flags = IORESOURCE_MEM; + request_resource(&iomem_resource, &res[1]); + + sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - IOP3XX_PCI_LOWER_MEM_BA; + sys->io_offset = IOP3XX_PCI_LOWER_IO_VA - IOP3XX_PCI_LOWER_IO_BA; + + sys->resource[0] = &res[0]; + sys->resource[1] = &res[1]; + sys->resource[2] = NULL; + + return 1; +} + +struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &iop3xx_ops, sys); +} + +void iop3xx_pci_preinit(void) +{ + DBG("PCI: Intel 803xx PCI init code.\n"); + DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD); + DBG("ATU: IOP3XX_OMWTVR0=0x%04x, IOP3XX_OIOWTVR=0x%04x\n", + *IOP3XX_OMWTVR0, + *IOP3XX_OIOWTVR); + DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR); + DBG("ATU: IOP3XX_IABAR0=0x%08x IOP3XX_IALR0=0x%08x IOP3XX_IATVR0=%08x\n", + *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0); + DBG("ATU: IOP3XX_OMWTVR0=0x%08x\n", *IOP3XX_OMWTVR0); + DBG("ATU: IOP3XX_IABAR1=0x%08x IOP3XX_IALR1=0x%08x\n", + *IOP3XX_IABAR1, *IOP3XX_IALR1); + DBG("ATU: IOP3XX_ERBAR=0x%08x IOP3XX_ERLR=0x%08x IOP3XX_ERTVR=%08x\n", + *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR); + DBG("ATU: IOP3XX_IABAR2=0x%08x IOP3XX_IALR2=0x%08x IOP3XX_IATVR2=%08x\n", + *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2); + DBG("ATU: IOP3XX_IABAR3=0x%08x IOP3XX_IALR3=0x%08x IOP3XX_IATVR3=%08x\n", + *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3); + + hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, "imprecise external abort"); +} diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c new file mode 100644 index 000000000000..4689db638e95 --- /dev/null +++ b/arch/arm/plat-iop/setup.c @@ -0,0 +1,38 @@ +/* + * arch/arm/plat-iop/setup.c + * + * Author: Nicolas Pitre <nico@cam.org> + * Copyright (C) 2001 MontaVista Software, Inc. + * Copyright (C) 2004 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <asm/mach/map.h> +#include <asm/hardware/iop3xx.h> + +/* + * Standard IO mapping for all IOP3xx based systems + */ +static struct map_desc iop3xx_std_desc[] __initdata = { + { /* mem mapped registers */ + .virtual = IOP3XX_PERIPHERAL_VIRT_BASE, + .pfn = __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE), + .length = IOP3XX_PERIPHERAL_SIZE, + .type = MT_DEVICE, + }, { /* PCI IO space */ + .virtual = IOP3XX_PCI_LOWER_IO_VA, + .pfn = __phys_to_pfn(IOP3XX_PCI_LOWER_IO_PA), + .length = IOP3XX_PCI_IO_WINDOW_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init iop3xx_map_io(void) +{ + iotable_init(iop3xx_std_desc, ARRAY_SIZE(iop3xx_std_desc)); +} diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c new file mode 100644 index 000000000000..06282dffbdc6 --- /dev/null +++ b/arch/arm/plat-iop/time.c @@ -0,0 +1,98 @@ +/* + * arch/arm/plat-iop/time.c + * + * Timer code for IOP32x and IOP33x based systems + * + * Author: Deepak Saxena <dsaxena@mvista.com> + * + * Copyright 2002-2003 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/init.h> +#include <linux/timex.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include <asm/mach/irq.h> +#include <asm/mach/time.h> + +#ifdef CONFIG_ARCH_IOP32X +#define IRQ_IOP3XX_TIMER0 IRQ_IOP32X_TIMER0 +#else +#ifdef CONFIG_ARCH_IOP33X +#define IRQ_IOP3XX_TIMER0 IRQ_IOP33X_TIMER0 +#endif +#endif + +static unsigned long ticks_per_jiffy; +static unsigned long ticks_per_usec; +static unsigned long next_jiffy_time; + +unsigned long iop3xx_gettimeoffset(void) +{ + unsigned long offset; + + offset = next_jiffy_time - *IOP3XX_TU_TCR1; + + return offset / ticks_per_usec; +} + +static irqreturn_t +iop3xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + write_seqlock(&xtime_lock); + + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (1)); + iop3xx_cp6_disable(); + + while ((signed long)(next_jiffy_time - *IOP3XX_TU_TCR1) + >= ticks_per_jiffy) { + timer_tick(regs); + next_jiffy_time -= ticks_per_jiffy; + } + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction iop3xx_timer_irq = { + .name = "IOP3XX Timer Tick", + .handler = iop3xx_timer_interrupt, + .flags = IRQF_DISABLED | IRQF_TIMER, +}; + +void __init iop3xx_init_time(unsigned long tick_rate) +{ + u32 timer_ctl; + + ticks_per_jiffy = (tick_rate + HZ/2) / HZ; + ticks_per_usec = tick_rate / 1000000; + next_jiffy_time = 0xffffffff; + + timer_ctl = IOP3XX_TMR_EN | IOP3XX_TMR_PRIVILEGED | + IOP3XX_TMR_RELOAD | IOP3XX_TMR_RATIO_1_1; + + /* + * We use timer 0 for our timer interrupt, and timer 1 as + * monotonic counter for tracking missed jiffies. + */ + iop3xx_cp6_enable(); + asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (ticks_per_jiffy - 1)); + asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (timer_ctl)); + asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (0xffffffff)); + asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (timer_ctl)); + iop3xx_cp6_disable(); + + setup_irq(IRQ_IOP3XX_TIMER0, &iop3xx_timer_irq); +} diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 7f45c7c3e673..f1179ad4be1b 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -100,6 +100,7 @@ void clk_disable(struct clk *clk) return; spin_lock_irqsave(&clockfw_lock, flags); + BUG_ON(clk->usecount == 0); if (arch_clock->clk_disable) arch_clock->clk_disable(clk); spin_unlock_irqrestore(&clockfw_lock, flags); @@ -322,6 +323,31 @@ EXPORT_SYMBOL(clk_allow_idle); /*-------------------------------------------------------------------------*/ +#ifdef CONFIG_OMAP_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + unsigned long flags; + + list_for_each_entry(ck, &clocks, node) { + if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) || + ck->enable_reg == 0) + continue; + + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_disable_unused) + arch_clock->clk_disable_unused(ck); + spin_unlock_irqrestore(&clockfw_lock, flags); + } + + return 0; +} +late_initcall(clk_disable_unused); +#endif + int __init clk_init(struct clk_functions * custom_clocks) { if (!custom_clocks) { diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 1812f237d12f..dbc3f44e07a6 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -148,7 +148,7 @@ static inline void omap_init_kp(void) {} #ifdef CONFIG_ARCH_OMAP24XX #define OMAP_MMC1_BASE 0x4809c000 -#define OMAP_MMC1_INT 83 +#define OMAP_MMC1_INT INT_24XX_MMC_IRQ #else #define OMAP_MMC1_BASE 0xfffb7800 #define OMAP_MMC1_INT INT_MMC @@ -225,7 +225,14 @@ static void __init omap_init_mmc(void) /* block 1 is always available and has just one pinout option */ mmc = &mmc_conf->mmc[0]; if (mmc->enabled) { - if (!cpu_is_omap24xx()) { + if (cpu_is_omap24xx()) { + omap_cfg_reg(H18_24XX_MMC_CMD); + omap_cfg_reg(H15_24XX_MMC_CLKI); + omap_cfg_reg(G19_24XX_MMC_CLKO); + omap_cfg_reg(F20_24XX_MMC_DAT0); + omap_cfg_reg(F19_24XX_MMC_DAT_DIR0); + omap_cfg_reg(G18_24XX_MMC_CMD_DIR); + } else { omap_cfg_reg(MMC_CMD); omap_cfg_reg(MMC_CLK); omap_cfg_reg(MMC_DAT0); @@ -236,7 +243,14 @@ static void __init omap_init_mmc(void) } } if (mmc->wire4) { - if (!cpu_is_omap24xx()) { + if (cpu_is_omap24xx()) { + omap_cfg_reg(H14_24XX_MMC_DAT1); + omap_cfg_reg(E19_24XX_MMC_DAT2); + omap_cfg_reg(D19_24XX_MMC_DAT3); + omap_cfg_reg(E20_24XX_MMC_DAT_DIR1); + omap_cfg_reg(F18_24XX_MMC_DAT_DIR2); + omap_cfg_reg(E18_24XX_MMC_DAT_DIR3); + } else { omap_cfg_reg(MMC_DAT1); /* NOTE: DAT2 can be on W10 (here) or M15 */ if (!mmc->nomux) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 9eddc9507147..1bbb431843ce 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -119,32 +119,41 @@ static void clear_lch_regs(int lch) omap_writew(0, lch_base + i); } -void omap_set_dma_priority(int dst_port, int priority) +void omap_set_dma_priority(int lch, int dst_port, int priority) { unsigned long reg; u32 l; - switch (dst_port) { - case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */ - reg = OMAP_TC_OCPT1_PRIOR; - break; - case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */ - reg = OMAP_TC_OCPT2_PRIOR; - break; - case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */ - reg = OMAP_TC_EMIFF_PRIOR; - break; - case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */ - reg = OMAP_TC_EMIFS_PRIOR; - break; - default: - BUG(); - return; + if (cpu_class_is_omap1()) { + switch (dst_port) { + case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */ + reg = OMAP_TC_OCPT1_PRIOR; + break; + case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */ + reg = OMAP_TC_OCPT2_PRIOR; + break; + case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */ + reg = OMAP_TC_EMIFF_PRIOR; + break; + case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */ + reg = OMAP_TC_EMIFS_PRIOR; + break; + default: + BUG(); + return; + } + l = omap_readl(reg); + l &= ~(0xf << 8); + l |= (priority & 0xf) << 8; + omap_writel(l, reg); + } + + if (cpu_is_omap24xx()) { + if (priority) + OMAP_DMA_CCR_REG(lch) |= (1 << 6); + else + OMAP_DMA_CCR_REG(lch) &= ~(1 << 6); } - l = omap_readl(reg); - l &= ~(0xf << 8); - l |= (priority & 0xf) << 8; - omap_writel(l, reg); } void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, @@ -234,6 +243,14 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) OMAP1_DMA_LCH_CTRL_REG(lch) = w; } +void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode) +{ + if (cpu_is_omap24xx()) { + OMAP_DMA_CSDP_REG(lch) &= ~(0x3 << 16); + OMAP_DMA_CSDP_REG(lch) |= (mode << 16); + } +} + /* Note that src_port is only for omap1 */ void omap_set_dma_src_params(int lch, int src_port, int src_amode, unsigned long src_start, @@ -698,6 +715,32 @@ void omap_stop_dma(int lch) } /* + * Allows changing the DMA callback function or data. This may be needed if + * the driver shares a single DMA channel for multiple dma triggers. + */ +int omap_set_dma_callback(int lch, + void (* callback)(int lch, u16 ch_status, void *data), + void *data) +{ + unsigned long flags; + + if (lch < 0) + return -ENODEV; + + spin_lock_irqsave(&dma_chan_lock, flags); + if (dma_chan[lch].dev_id == -1) { + printk(KERN_ERR "DMA callback for not set for free channel\n"); + spin_unlock_irqrestore(&dma_chan_lock, flags); + return -EINVAL; + } + dma_chan[lch].callback = callback; + dma_chan[lch].data = data; + spin_unlock_irqrestore(&dma_chan_lock, flags); + + return 0; +} + +/* * Returns current physical source address for the given DMA channel. * If the channel is running the caller must disable interrupts prior calling * this function and process the returned value before re-enabling interrupt to @@ -1339,6 +1382,14 @@ static int __init omap_init_dma(void) dma_chan_count = 16; } else dma_chan_count = 9; + if (cpu_is_omap16xx()) { + u16 w; + + /* this would prevent OMAP sleep */ + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w &= ~(1 << 8); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + } } else if (cpu_is_omap24xx()) { u8 revision = omap_readb(OMAP_DMA4_REVISION); printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", @@ -1414,11 +1465,13 @@ EXPORT_SYMBOL(omap_request_dma); EXPORT_SYMBOL(omap_free_dma); EXPORT_SYMBOL(omap_start_dma); EXPORT_SYMBOL(omap_stop_dma); +EXPORT_SYMBOL(omap_set_dma_callback); EXPORT_SYMBOL(omap_enable_dma_irq); EXPORT_SYMBOL(omap_disable_dma_irq); EXPORT_SYMBOL(omap_set_dma_transfer_params); EXPORT_SYMBOL(omap_set_dma_color_mode); +EXPORT_SYMBOL(omap_set_dma_write_mode); EXPORT_SYMBOL(omap_set_dma_src_params); EXPORT_SYMBOL(omap_set_dma_src_index); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 50524436de63..bcbb8d7392be 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -75,10 +75,14 @@ struct omap_dm_timer { #endif void __iomem *io_base; unsigned reserved:1; + unsigned enabled:1; }; #ifdef CONFIG_ARCH_OMAP1 +#define omap_dm_clk_enable(x) +#define omap_dm_clk_disable(x) + static struct omap_dm_timer dm_timers[] = { { .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 }, { .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 }, @@ -92,6 +96,9 @@ static struct omap_dm_timer dm_timers[] = { #elif defined(CONFIG_ARCH_OMAP2) +#define omap_dm_clk_enable(x) clk_enable(x) +#define omap_dm_clk_disable(x) clk_disable(x) + static struct omap_dm_timer dm_timers[] = { { .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 }, { .phys_base = 0x4802a000, .irq = INT_24XX_GPTIMER2 }, @@ -154,24 +161,28 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer) { u32 l; - if (timer != &dm_timers[0]) { + if (!cpu_class_is_omap2() || timer != &dm_timers[0]) { omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); omap_dm_timer_wait_for_reset(timer); } - omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_SYS_CLK); + omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); /* Set to smart-idle mode */ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG); l |= 0x02 << 3; + + if (cpu_class_is_omap2() && timer == &dm_timers[0]) { + /* Enable wake-up only for GPT1 on OMAP2 CPUs*/ + l |= 1 << 2; + /* Non-posted mode */ + omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0); + } omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l); } static void omap_dm_timer_prepare(struct omap_dm_timer *timer) { -#ifdef CONFIG_ARCH_OMAP2 - clk_enable(timer->iclk); - clk_enable(timer->fclk); -#endif + omap_dm_timer_enable(timer); omap_dm_timer_reset(timer); } @@ -223,15 +234,36 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) void omap_dm_timer_free(struct omap_dm_timer *timer) { + omap_dm_timer_enable(timer); omap_dm_timer_reset(timer); -#ifdef CONFIG_ARCH_OMAP2 - clk_disable(timer->iclk); - clk_disable(timer->fclk); -#endif + omap_dm_timer_disable(timer); + WARN_ON(!timer->reserved); timer->reserved = 0; } +void omap_dm_timer_enable(struct omap_dm_timer *timer) +{ + if (timer->enabled) + return; + + omap_dm_clk_enable(timer->fclk); + omap_dm_clk_enable(timer->iclk); + + timer->enabled = 1; +} + +void omap_dm_timer_disable(struct omap_dm_timer *timer) +{ + if (!timer->enabled) + return; + + omap_dm_clk_disable(timer->iclk); + omap_dm_clk_disable(timer->fclk); + + timer->enabled = 0; +} + int omap_dm_timer_get_irq(struct omap_dm_timer *timer) { return timer->irq; @@ -276,7 +308,7 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask) struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer) { - return timer->fclk; + return timer->fclk; } __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask) @@ -406,11 +438,16 @@ void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value) { omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value); + omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, value); } unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer) { - return omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG); + unsigned int l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG); + + return l; } void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) @@ -420,12 +457,16 @@ void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer) { - return omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG); + unsigned int l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG); + + return l; } void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value) { - return omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value); + omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value); } int omap_dm_timers_active(void) @@ -436,9 +477,14 @@ int omap_dm_timers_active(void) struct omap_dm_timer *timer; timer = &dm_timers[i]; + + if (!timer->enabled) + continue; + if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) & - OMAP_TIMER_CTRL_ST) + OMAP_TIMER_CTRL_ST) { return 1; + } } return 0; } diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index cd7f973fb286..f55f99ae58ae 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -94,6 +94,8 @@ #define OMAP24XX_GPIO_SYSCONFIG 0x0010 #define OMAP24XX_GPIO_SYSSTATUS 0x0014 #define OMAP24XX_GPIO_IRQSTATUS1 0x0018 +#define OMAP24XX_GPIO_IRQSTATUS2 0x0028 +#define OMAP24XX_GPIO_IRQENABLE2 0x002c #define OMAP24XX_GPIO_IRQENABLE1 0x001c #define OMAP24XX_GPIO_CTRL 0x0030 #define OMAP24XX_GPIO_OE 0x0034 @@ -110,8 +112,6 @@ #define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 #define OMAP24XX_GPIO_SETDATAOUT 0x0094 -#define OMAP_MPUIO_MASK (~OMAP_MAX_GPIO_LINES & 0xff) - struct gpio_bank { void __iomem *base; u16 irq; @@ -216,11 +216,13 @@ static inline int gpio_valid(int gpio) { if (gpio < 0) return -1; +#ifndef CONFIG_ARCH_OMAP24XX if (OMAP_GPIO_IS_MPUIO(gpio)) { - if ((gpio & OMAP_MPUIO_MASK) > 16) + if (gpio >= OMAP_MAX_GPIO_LINES + 16) return -1; return 0; } +#endif #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx() && gpio < 16) return 0; @@ -529,6 +531,10 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) return; } __raw_writel(gpio_mask, reg); + + /* Workaround for clearing DSP GPIO interrupts to allow retention */ + if (cpu_is_omap2420()) + __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2); } static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) @@ -662,6 +668,14 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) } } +static void _reset_gpio(struct gpio_bank *bank, int gpio) +{ + _set_gpio_direction(bank, get_gpio_index(gpio), 1); + _set_gpio_irqenable(bank, gpio, 0); + _clear_gpio_irqstatus(bank, gpio); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); +} + /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ static int gpio_wake_enable(unsigned int irq, unsigned int enable) { @@ -672,9 +686,7 @@ static int gpio_wake_enable(unsigned int irq, unsigned int enable) if (check_gpio(gpio) < 0) return -ENODEV; bank = get_gpio_bank(gpio); - spin_lock(&bank->lock); retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable); - spin_unlock(&bank->lock); return retval; } @@ -696,7 +708,9 @@ int omap_request_gpio(int gpio) } bank->reserved_map |= (1 << get_gpio_index(gpio)); - /* Set trigger to none. You need to enable the trigger after request_irq */ + /* Set trigger to none. You need to enable the desired trigger with + * request_irq() or set_irq_type(). + */ _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); #ifdef CONFIG_ARCH_OMAP15XX @@ -756,9 +770,7 @@ void omap_free_gpio(int gpio) } #endif bank->reserved_map &= ~(1 << get_gpio_index(gpio)); - _set_gpio_direction(bank, get_gpio_index(gpio), 1); - _set_gpio_irqenable(bank, gpio, 0); - _clear_gpio_irqstatus(bank, gpio); + _reset_gpio(bank, gpio); spin_unlock(&bank->lock); } @@ -898,6 +910,14 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, } +static void gpio_irq_shutdown(unsigned int irq) +{ + unsigned int gpio = irq - IH_GPIO_BASE; + struct gpio_bank *bank = get_gpio_bank(gpio); + + _reset_gpio(bank, gpio); +} + static void gpio_ack_irq(unsigned int irq) { unsigned int gpio = irq - IH_GPIO_BASE; @@ -946,6 +966,7 @@ static void mpuio_unmask_irq(unsigned int irq) static struct irq_chip gpio_irq_chip = { .name = "GPIO", + .shutdown = gpio_irq_shutdown, .ack = gpio_ack_irq, .mask = gpio_mask_irq, .unmask = gpio_unmask_irq, @@ -985,7 +1006,7 @@ static int __init _omap_gpio_init(void) else clk_enable(gpio_ick); gpio_fck = clk_get(NULL, "gpios_fck"); - if (IS_ERR(gpio_ick)) + if (IS_ERR(gpio_fck)) printk("Could not get gpios_fck\n"); else clk_enable(gpio_fck); @@ -1144,8 +1165,8 @@ static int omap_gpio_resume(struct sys_device *dev) wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; case METHOD_GPIO_24XX: - wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; + wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; break; default: continue; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 196aac3ac329..ade9a0fa6ef6 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -75,8 +75,6 @@ static struct clk *mcbsp1_ick = 0; static struct clk *mcbsp1_fck = 0; static struct clk *mcbsp2_ick = 0; static struct clk *mcbsp2_fck = 0; -static struct clk *sys_ck = 0; -static struct clk *sys_clkout = 0; #endif static void omap_mcbsp_dump_reg(u8 id) @@ -232,7 +230,6 @@ static void omap2_mcbsp2_mux_setup(void) omap_cfg_reg(W15_24XX_MCBSP2_DR); omap_cfg_reg(V15_24XX_MCBSP2_DX); omap_cfg_reg(V14_24XX_GPIO117); - omap_cfg_reg(W14_24XX_SYS_CLKOUT); } #endif @@ -984,13 +981,7 @@ static int __init omap_mcbsp_init(void) if (cpu_is_omap24xx()) { mcbsp_info = mcbsp_24xx; mcbsp_count = ARRAY_SIZE(mcbsp_24xx); - - /* REVISIT: where's the right place? */ omap2_mcbsp2_mux_setup(); - sys_ck = clk_get(0, "sys_ck"); - sys_clkout = clk_get(0, "sys_clkout"); - clk_set_parent(sys_clkout, sys_ck); - clk_enable(sys_clkout); } #endif for (i = 0; i < OMAP_MAX_MCBSP_COUNT ; i++) { diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c deleted file mode 100644 index 04b4102727a8..000000000000 --- a/arch/arm/plat-omap/pm.c +++ /dev/null @@ -1,670 +0,0 @@ -/* - * linux/arch/arm/plat-omap/pm.c - * - * OMAP Power Management Routines - * - * Original code for the SA11x0: - * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com> - * - * Modified for the PXA250 by Nicolas Pitre: - * Copyright (c) 2002 Monta Vista Software, Inc. - * - * Modified for the OMAP1510 by David Singleton: - * Copyright (c) 2002 Monta Vista Software, Inc. - * - * Cleanup 2004 for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/pm.h> -#include <linux/sched.h> -#include <linux/proc_fs.h> -#include <linux/pm.h> -#include <linux/interrupt.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/mach/time.h> -#include <asm/mach/irq.h> - -#include <asm/mach-types.h> -#include <asm/arch/irqs.h> -#include <asm/arch/tc.h> -#include <asm/arch/pm.h> -#include <asm/arch/mux.h> -#include <asm/arch/tps65010.h> -#include <asm/arch/dsp_common.h> - -#include <asm/arch/clock.h> -#include <asm/arch/sram.h> - -static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; -static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; -static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE]; -static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; -static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; - -static void (*omap_sram_idle)(void) = NULL; -static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; - -/* - * Let's power down on idle, but only if we are really - * idle, because once we start down the path of - * going idle we continue to do idle even if we get - * a clock tick interrupt . . - */ -void omap_pm_idle(void) -{ - unsigned int mask32 = 0; - - /* - * If the DSP is being used let's just idle the CPU, the overhead - * to wake up from Big Sleep is big, milliseconds versus micro - * seconds for wait for interrupt. - */ - - local_irq_disable(); - local_fiq_disable(); - if (need_resched()) { - local_fiq_enable(); - local_irq_enable(); - return; - } - mask32 = omap_readl(ARM_SYSST); - - /* - * Prevent the ULPD from entering low power state by setting - * POWER_CTRL_REG:4 = 0 - */ - omap_writew(omap_readw(ULPD_POWER_CTRL) & - ~ULPD_DEEP_SLEEP_TRANSITION_EN, ULPD_POWER_CTRL); - - /* - * Since an interrupt may set up a timer, we don't want to - * reprogram the hardware timer with interrupts enabled. - * Re-enable interrupts only after returning from idle. - */ - timer_dyn_reprogram(); - - if ((mask32 & DSP_IDLE) == 0) { - __asm__ volatile ("mcr p15, 0, r0, c7, c0, 4"); - } else - omap_sram_idle(); - - local_fiq_enable(); - local_irq_enable(); -} - -/* - * Configuration of the wakeup event is board specific. For the - * moment we put it into this helper function. Later it may move - * to board specific files. - */ -static void omap_pm_wakeup_setup(void) -{ - u32 level1_wake = 0; - u32 level2_wake = OMAP_IRQ_BIT(INT_UART2); - - /* - * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade, - * and the L2 wakeup interrupts: keypad and UART2. Note that the - * drivers must still separately call omap_set_gpio_wakeup() to - * wake up to a GPIO interrupt. - */ - if (cpu_is_omap730()) - level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) | - OMAP_IRQ_BIT(INT_730_IH2_IRQ); - else if (cpu_is_omap1510()) - level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | - OMAP_IRQ_BIT(INT_1510_IH2_IRQ); - else if (cpu_is_omap16xx()) - level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | - OMAP_IRQ_BIT(INT_1610_IH2_IRQ); - - omap_writel(~level1_wake, OMAP_IH1_MIR); - - if (cpu_is_omap730()) { - omap_writel(~level2_wake, OMAP_IH2_0_MIR); - omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), OMAP_IH2_1_MIR); - } else if (cpu_is_omap1510()) { - level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); - omap_writel(~level2_wake, OMAP_IH2_MIR); - } else if (cpu_is_omap16xx()) { - level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); - omap_writel(~level2_wake, OMAP_IH2_0_MIR); - - /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */ - omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR); - omap_writel(~0x0, OMAP_IH2_2_MIR); - omap_writel(~0x0, OMAP_IH2_3_MIR); - } - - /* New IRQ agreement, recalculate in cascade order */ - omap_writel(1, OMAP_IH2_CONTROL); - omap_writel(1, OMAP_IH1_CONTROL); -} - -void omap_pm_suspend(void) -{ - unsigned long arg0 = 0, arg1 = 0; - - printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev); - - omap_serial_wake_trigger(1); - - if (machine_is_omap_osk()) { - /* Stop LED1 (D9) blink */ - tps65010_set_led(LED1, OFF); - } - - omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG); - - /* - * Step 1: turn off interrupts (FIXME: NOTE: already disabled) - */ - - local_irq_disable(); - local_fiq_disable(); - - /* - * Step 2: save registers - * - * The omap is a strange/beautiful device. The caches, memory - * and register state are preserved across power saves. - * We have to save and restore very little register state to - * idle the omap. - * - * Save interrupt, MPUI, ARM and UPLD control registers. - */ - - if (cpu_is_omap730()) { - MPUI730_SAVE(OMAP_IH1_MIR); - MPUI730_SAVE(OMAP_IH2_0_MIR); - MPUI730_SAVE(OMAP_IH2_1_MIR); - MPUI730_SAVE(MPUI_CTRL); - MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI730_SAVE(MPUI_DSP_API_CONFIG); - MPUI730_SAVE(EMIFS_CONFIG); - MPUI730_SAVE(EMIFF_SDRAM_CONFIG); - - } else if (cpu_is_omap1510()) { - MPUI1510_SAVE(OMAP_IH1_MIR); - MPUI1510_SAVE(OMAP_IH2_MIR); - MPUI1510_SAVE(MPUI_CTRL); - MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI1510_SAVE(MPUI_DSP_API_CONFIG); - MPUI1510_SAVE(EMIFS_CONFIG); - MPUI1510_SAVE(EMIFF_SDRAM_CONFIG); - } else if (cpu_is_omap16xx()) { - MPUI1610_SAVE(OMAP_IH1_MIR); - MPUI1610_SAVE(OMAP_IH2_0_MIR); - MPUI1610_SAVE(OMAP_IH2_1_MIR); - MPUI1610_SAVE(OMAP_IH2_2_MIR); - MPUI1610_SAVE(OMAP_IH2_3_MIR); - MPUI1610_SAVE(MPUI_CTRL); - MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI1610_SAVE(MPUI_DSP_API_CONFIG); - MPUI1610_SAVE(EMIFS_CONFIG); - MPUI1610_SAVE(EMIFF_SDRAM_CONFIG); - } - - ARM_SAVE(ARM_CKCTL); - ARM_SAVE(ARM_IDLECT1); - ARM_SAVE(ARM_IDLECT2); - if (!(cpu_is_omap1510())) - ARM_SAVE(ARM_IDLECT3); - ARM_SAVE(ARM_EWUPCT); - ARM_SAVE(ARM_RSTCT1); - ARM_SAVE(ARM_RSTCT2); - ARM_SAVE(ARM_SYSST); - ULPD_SAVE(ULPD_CLOCK_CTRL); - ULPD_SAVE(ULPD_STATUS_REQ); - - /* (Step 3 removed - we now allow deep sleep by default) */ - - /* - * Step 4: OMAP DSP Shutdown - */ - - - /* - * Step 5: Wakeup Event Setup - */ - - omap_pm_wakeup_setup(); - - /* - * Step 6: ARM and Traffic controller shutdown - */ - - /* disable ARM watchdog */ - omap_writel(0x00F5, OMAP_WDT_TIMER_MODE); - omap_writel(0x00A0, OMAP_WDT_TIMER_MODE); - - /* - * Step 6b: ARM and Traffic controller shutdown - * - * Step 6 continues here. Prepare jump to power management - * assembly code in internal SRAM. - * - * Since the omap_cpu_suspend routine has been copied to - * SRAM, we'll do an indirect procedure call to it and pass the - * contents of arm_idlect1 and arm_idlect2 so it can restore - * them when it wakes up and it will return. - */ - - arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1]; - arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2]; - - /* - * Step 6c: ARM and Traffic controller shutdown - * - * Jump to assembly code. The processor will stay there - * until wake up. - */ - omap_sram_suspend(arg0, arg1); - - /* - * If we are here, processor is woken up! - */ - - /* - * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did - */ - - if (!(cpu_is_omap1510())) - ARM_RESTORE(ARM_IDLECT3); - ARM_RESTORE(ARM_CKCTL); - ARM_RESTORE(ARM_EWUPCT); - ARM_RESTORE(ARM_RSTCT1); - ARM_RESTORE(ARM_RSTCT2); - ARM_RESTORE(ARM_SYSST); - ULPD_RESTORE(ULPD_CLOCK_CTRL); - ULPD_RESTORE(ULPD_STATUS_REQ); - - if (cpu_is_omap730()) { - MPUI730_RESTORE(EMIFS_CONFIG); - MPUI730_RESTORE(EMIFF_SDRAM_CONFIG); - MPUI730_RESTORE(OMAP_IH1_MIR); - MPUI730_RESTORE(OMAP_IH2_0_MIR); - MPUI730_RESTORE(OMAP_IH2_1_MIR); - } else if (cpu_is_omap1510()) { - MPUI1510_RESTORE(MPUI_CTRL); - MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG); - MPUI1510_RESTORE(MPUI_DSP_API_CONFIG); - MPUI1510_RESTORE(EMIFS_CONFIG); - MPUI1510_RESTORE(EMIFF_SDRAM_CONFIG); - MPUI1510_RESTORE(OMAP_IH1_MIR); - MPUI1510_RESTORE(OMAP_IH2_MIR); - } else if (cpu_is_omap16xx()) { - MPUI1610_RESTORE(MPUI_CTRL); - MPUI1610_RESTORE(MPUI_DSP_BOOT_CONFIG); - MPUI1610_RESTORE(MPUI_DSP_API_CONFIG); - MPUI1610_RESTORE(EMIFS_CONFIG); - MPUI1610_RESTORE(EMIFF_SDRAM_CONFIG); - - MPUI1610_RESTORE(OMAP_IH1_MIR); - MPUI1610_RESTORE(OMAP_IH2_0_MIR); - MPUI1610_RESTORE(OMAP_IH2_1_MIR); - MPUI1610_RESTORE(OMAP_IH2_2_MIR); - MPUI1610_RESTORE(OMAP_IH2_3_MIR); - } - - omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG); - - /* - * Reenable interrupts - */ - - local_irq_enable(); - local_fiq_enable(); - - omap_serial_wake_trigger(0); - - printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev); - - if (machine_is_omap_osk()) { - /* Let LED1 (D9) blink again */ - tps65010_set_led(LED1, BLINK); - } -} - -#if defined(DEBUG) && defined(CONFIG_PROC_FS) -static int g_read_completed; - -/* - * Read system PM registers for debugging - */ -static int omap_pm_read_proc( - char *page_buffer, - char **my_first_byte, - off_t virtual_start, - int length, - int *eof, - void *data) -{ - int my_buffer_offset = 0; - char * const my_base = page_buffer; - - ARM_SAVE(ARM_CKCTL); - ARM_SAVE(ARM_IDLECT1); - ARM_SAVE(ARM_IDLECT2); - if (!(cpu_is_omap1510())) - ARM_SAVE(ARM_IDLECT3); - ARM_SAVE(ARM_EWUPCT); - ARM_SAVE(ARM_RSTCT1); - ARM_SAVE(ARM_RSTCT2); - ARM_SAVE(ARM_SYSST); - - ULPD_SAVE(ULPD_IT_STATUS); - ULPD_SAVE(ULPD_CLOCK_CTRL); - ULPD_SAVE(ULPD_SOFT_REQ); - ULPD_SAVE(ULPD_STATUS_REQ); - ULPD_SAVE(ULPD_DPLL_CTRL); - ULPD_SAVE(ULPD_POWER_CTRL); - - if (cpu_is_omap730()) { - MPUI730_SAVE(MPUI_CTRL); - MPUI730_SAVE(MPUI_DSP_STATUS); - MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI730_SAVE(MPUI_DSP_API_CONFIG); - MPUI730_SAVE(EMIFF_SDRAM_CONFIG); - MPUI730_SAVE(EMIFS_CONFIG); - } else if (cpu_is_omap1510()) { - MPUI1510_SAVE(MPUI_CTRL); - MPUI1510_SAVE(MPUI_DSP_STATUS); - MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI1510_SAVE(MPUI_DSP_API_CONFIG); - MPUI1510_SAVE(EMIFF_SDRAM_CONFIG); - MPUI1510_SAVE(EMIFS_CONFIG); - } else if (cpu_is_omap16xx()) { - MPUI1610_SAVE(MPUI_CTRL); - MPUI1610_SAVE(MPUI_DSP_STATUS); - MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI1610_SAVE(MPUI_DSP_API_CONFIG); - MPUI1610_SAVE(EMIFF_SDRAM_CONFIG); - MPUI1610_SAVE(EMIFS_CONFIG); - } - - if (virtual_start == 0) { - g_read_completed = 0; - - my_buffer_offset += sprintf(my_base + my_buffer_offset, - "ARM_CKCTL_REG: 0x%-8x \n" - "ARM_IDLECT1_REG: 0x%-8x \n" - "ARM_IDLECT2_REG: 0x%-8x \n" - "ARM_IDLECT3_REG: 0x%-8x \n" - "ARM_EWUPCT_REG: 0x%-8x \n" - "ARM_RSTCT1_REG: 0x%-8x \n" - "ARM_RSTCT2_REG: 0x%-8x \n" - "ARM_SYSST_REG: 0x%-8x \n" - "ULPD_IT_STATUS_REG: 0x%-4x \n" - "ULPD_CLOCK_CTRL_REG: 0x%-4x \n" - "ULPD_SOFT_REQ_REG: 0x%-4x \n" - "ULPD_DPLL_CTRL_REG: 0x%-4x \n" - "ULPD_STATUS_REQ_REG: 0x%-4x \n" - "ULPD_POWER_CTRL_REG: 0x%-4x \n", - ARM_SHOW(ARM_CKCTL), - ARM_SHOW(ARM_IDLECT1), - ARM_SHOW(ARM_IDLECT2), - ARM_SHOW(ARM_IDLECT3), - ARM_SHOW(ARM_EWUPCT), - ARM_SHOW(ARM_RSTCT1), - ARM_SHOW(ARM_RSTCT2), - ARM_SHOW(ARM_SYSST), - ULPD_SHOW(ULPD_IT_STATUS), - ULPD_SHOW(ULPD_CLOCK_CTRL), - ULPD_SHOW(ULPD_SOFT_REQ), - ULPD_SHOW(ULPD_DPLL_CTRL), - ULPD_SHOW(ULPD_STATUS_REQ), - ULPD_SHOW(ULPD_POWER_CTRL)); - - if (cpu_is_omap730()) { - my_buffer_offset += sprintf(my_base + my_buffer_offset, - "MPUI730_CTRL_REG 0x%-8x \n" - "MPUI730_DSP_STATUS_REG: 0x%-8x \n" - "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n" - "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n" - "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n" - "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n", - MPUI730_SHOW(MPUI_CTRL), - MPUI730_SHOW(MPUI_DSP_STATUS), - MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG), - MPUI730_SHOW(MPUI_DSP_API_CONFIG), - MPUI730_SHOW(EMIFF_SDRAM_CONFIG), - MPUI730_SHOW(EMIFS_CONFIG)); - } else if (cpu_is_omap1510()) { - my_buffer_offset += sprintf(my_base + my_buffer_offset, - "MPUI1510_CTRL_REG 0x%-8x \n" - "MPUI1510_DSP_STATUS_REG: 0x%-8x \n" - "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n" - "MPUI1510_DSP_API_CONFIG_REG: 0x%-8x \n" - "MPUI1510_SDRAM_CONFIG_REG: 0x%-8x \n" - "MPUI1510_EMIFS_CONFIG_REG: 0x%-8x \n", - MPUI1510_SHOW(MPUI_CTRL), - MPUI1510_SHOW(MPUI_DSP_STATUS), - MPUI1510_SHOW(MPUI_DSP_BOOT_CONFIG), - MPUI1510_SHOW(MPUI_DSP_API_CONFIG), - MPUI1510_SHOW(EMIFF_SDRAM_CONFIG), - MPUI1510_SHOW(EMIFS_CONFIG)); - } else if (cpu_is_omap16xx()) { - my_buffer_offset += sprintf(my_base + my_buffer_offset, - "MPUI1610_CTRL_REG 0x%-8x \n" - "MPUI1610_DSP_STATUS_REG: 0x%-8x \n" - "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n" - "MPUI1610_DSP_API_CONFIG_REG: 0x%-8x \n" - "MPUI1610_SDRAM_CONFIG_REG: 0x%-8x \n" - "MPUI1610_EMIFS_CONFIG_REG: 0x%-8x \n", - MPUI1610_SHOW(MPUI_CTRL), - MPUI1610_SHOW(MPUI_DSP_STATUS), - MPUI1610_SHOW(MPUI_DSP_BOOT_CONFIG), - MPUI1610_SHOW(MPUI_DSP_API_CONFIG), - MPUI1610_SHOW(EMIFF_SDRAM_CONFIG), - MPUI1610_SHOW(EMIFS_CONFIG)); - } - - g_read_completed++; - } else if (g_read_completed >= 1) { - *eof = 1; - return 0; - } - g_read_completed++; - - *my_first_byte = page_buffer; - return my_buffer_offset; -} - -static void omap_pm_init_proc(void) -{ - struct proc_dir_entry *entry; - - entry = create_proc_read_entry("driver/omap_pm", - S_IWUSR | S_IRUGO, NULL, - omap_pm_read_proc, NULL); -} - -#endif /* DEBUG && CONFIG_PROC_FS */ - -/* - * omap_pm_prepare - Do preliminary suspend work. - * @state: suspend state we're entering. - * - */ -//#include <asm/hardware.h> - -static int omap_pm_prepare(suspend_state_t state) -{ - int error = 0; - - switch (state) - { - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - break; - - case PM_SUSPEND_DISK: - return -ENOTSUPP; - - default: - return -EINVAL; - } - - return error; -} - - -/* - * omap_pm_enter - Actually enter a sleep state. - * @state: State we're entering. - * - */ - -static int omap_pm_enter(suspend_state_t state) -{ - switch (state) - { - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - omap_pm_suspend(); - break; - - case PM_SUSPEND_DISK: - return -ENOTSUPP; - - default: - return -EINVAL; - } - - return 0; -} - - -/** - * omap_pm_finish - Finish up suspend sequence. - * @state: State we're coming out of. - * - * This is called after we wake back up (or if entering the sleep state - * failed). - */ - -static int omap_pm_finish(suspend_state_t state) -{ - return 0; -} - - -static irqreturn_t omap_wakeup_interrupt(int irq, void * dev, - struct pt_regs * regs) -{ - return IRQ_HANDLED; -} - -static struct irqaction omap_wakeup_irq = { - .name = "peripheral wakeup", - .flags = IRQF_DISABLED, - .handler = omap_wakeup_interrupt -}; - - - -static struct pm_ops omap_pm_ops ={ - .pm_disk_mode = 0, - .prepare = omap_pm_prepare, - .enter = omap_pm_enter, - .finish = omap_pm_finish, -}; - -static int __init omap_pm_init(void) -{ - printk("Power Management for TI OMAP.\n"); - /* - * We copy the assembler sleep/wakeup routines to SRAM. - * These routines need to be in SRAM as that's the only - * memory the MPU can see when it wakes up. - */ - if (cpu_is_omap730()) { - omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend, - omap730_idle_loop_suspend_sz); - omap_sram_suspend = omap_sram_push(omap730_cpu_suspend, - omap730_cpu_suspend_sz); - } else if (cpu_is_omap1510()) { - omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend, - omap1510_idle_loop_suspend_sz); - omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, - omap1510_cpu_suspend_sz); - } else if (cpu_is_omap16xx()) { - omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend, - omap1610_idle_loop_suspend_sz); - omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend, - omap1610_cpu_suspend_sz); - } - - if (omap_sram_idle == NULL || omap_sram_suspend == NULL) { - printk(KERN_ERR "PM not initialized: Missing SRAM support\n"); - return -ENODEV; - } - - pm_idle = omap_pm_idle; - - if (cpu_is_omap730()) - setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); - else if (cpu_is_omap16xx()) - setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); - -#if 0 - /* --- BEGIN BOARD-DEPENDENT CODE --- */ - /* Sleepx mask direction */ - omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008); - /* Unmask sleepx signal */ - omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); - /* --- END BOARD-DEPENDENT CODE --- */ -#endif - - /* Program new power ramp-up time - * (0 for most boards since we don't lower voltage when in deep sleep) - */ - omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3); - - /* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */ - omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); - - /* Configure IDLECT3 */ - if (cpu_is_omap730()) - omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3); - else if (cpu_is_omap16xx()) - omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); - - pm_set_ops(&omap_pm_ops); - -#if defined(DEBUG) && defined(CONFIG_PROC_FS) - omap_pm_init_proc(); -#endif - - if (cpu_is_omap16xx()) { - /* configure LOW_PWR pin */ - omap_cfg_reg(T20_1610_LOW_PWR); - } - - return 0; -} -__initcall(omap_pm_init); - diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index e75718301b0f..19014b2ff4c6 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -174,10 +174,7 @@ void __init omap_map_sram(void) if (cpu_is_omap24xx()) { omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA; - if (is_sram_locked()) - base = OMAP2_SRAM_PUB_PA; - else - base = OMAP2_SRAM_PA; + base = OMAP2_SRAM_PA; base = ROUND_DOWN(base, PAGE_SIZE); omap_sram_io_desc[0].pfn = __phys_to_pfn(base); } diff --git a/arch/arm/plat-omap/timer32k.c b/arch/arm/plat-omap/timer32k.c index 281ecc7fcdfc..cf6df3378d37 100644 --- a/arch/arm/plat-omap/timer32k.c +++ b/arch/arm/plat-omap/timer32k.c @@ -105,6 +105,8 @@ static inline unsigned long omap_32k_timer_read(int reg) static inline void omap_32k_timer_start(unsigned long load_val) { + if (!load_val) + load_val = 1; omap_32k_timer_write(load_val, OMAP1_32K_TIMER_TVR); omap_32k_timer_write(0x0f, OMAP1_32K_TIMER_CR); } @@ -192,14 +194,11 @@ unsigned long long sched_clock(void) * issues with dynamic tick. In the dynamic tick case, we need to lock * with irqsave. */ -static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, - struct pt_regs *regs) +static inline irqreturn_t _omap_32k_timer_interrupt(int irq, void *dev_id, + struct pt_regs *regs) { - unsigned long flags; unsigned long now; - write_seqlock_irqsave(&xtime_lock, flags); - omap_32k_timer_ack_irq(); now = omap_32k_sync_timer_read(); @@ -215,6 +214,23 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, * continuous timer can be overridden from pm_idle to be longer. */ omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now); + + return IRQ_HANDLED; +} + +static irqreturn_t omap_32k_timer_handler(int irq, void *dev_id, + struct pt_regs *regs) +{ + return _omap_32k_timer_interrupt(irq, dev_id, regs); +} + +static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + unsigned long flags; + + write_seqlock_irqsave(&xtime_lock, flags); + _omap_32k_timer_interrupt(irq, dev_id, regs); write_sequnlock_irqrestore(&xtime_lock, flags); return IRQ_HANDLED; @@ -230,7 +246,15 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, */ void omap_32k_timer_reprogram(unsigned long next_tick) { - omap_32k_timer_start(JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1); + unsigned long ticks = JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1; + unsigned long now = omap_32k_sync_timer_read(); + unsigned long idled = now - omap_32k_last_tick; + + if (idled + 1 < ticks) + ticks -= idled; + else + ticks = 1; + omap_32k_timer_start(ticks); } static struct irqaction omap_32k_timer_irq; @@ -252,7 +276,7 @@ static struct dyn_tick_timer omap_dyn_tick_timer = { .enable = omap_32k_timer_enable_dyn_tick, .disable = omap_32k_timer_disable_dyn_tick, .reprogram = omap_32k_timer_reprogram, - .handler = omap_32k_timer_interrupt, + .handler = omap_32k_timer_handler, }; #endif /* CONFIG_NO_IDLE_HZ */ diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index e1372a25311d..b02af1d740fa 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Mon Jun 26 22:26:08 2006 +# Last update: Sat Sep 23 13:20:43 2006 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -329,7 +329,7 @@ nimbra29x ARCH_NIMBRA29X NIMBRA29X 311 nimbra210 ARCH_NIMBRA210 NIMBRA210 312 hhp_d95xx ARCH_HHP_D95XX HHP_D95XX 313 labarm ARCH_LABARM LABARM 314 -comcerto ARCH_M825XX M825XX 315 +m825xx ARCH_M825XX M825XX 315 m7100 SA1100_M7100 M7100 316 nipc2 ARCH_NIPC2 NIPC2 317 fu7202 ARCH_FU7202 FU7202 318 @@ -857,12 +857,12 @@ osiris MACH_OSIRIS OSIRIS 842 maestro MACH_MAESTRO MAESTRO 843 tunge2 MACH_TUNGE2 TUNGE2 844 ixbbm MACH_IXBBM IXBBM 845 -mx27ads MACH_MX27 MX27 846 +mx27ads MACH_MX27ADS MX27ADS 846 ax8004 MACH_AX8004 AX8004 847 at91sam9261ek MACH_AT91SAM9261EK AT91SAM9261EK 848 loft MACH_LOFT LOFT 849 magpie MACH_MAGPIE MAGPIE 850 -mx21ads MACH_MX21 MX21 851 +mx21ads MACH_MX21ADS MX21ADS 851 mb87m3400 MACH_MB87M3400 MB87M3400 852 mguard_delta MACH_MGUARD_DELTA MGUARD_DELTA 853 davinci_dvdp MACH_DAVINCI_DVDP DAVINCI_DVDP 854 @@ -1058,7 +1058,7 @@ akai9307 MACH_AKAI9307 AKAI9307 1044 fontaine MACH_FONTAINE FONTAINE 1045 wombat MACH_WOMBAT WOMBAT 1046 acq300 MACH_ACQ300 ACQ300 1047 -mod_270 MACH_MOD_270 MOD_270 1048 +mod272 MACH_MOD_270 MOD_270 1048 vmc_vc0820 MACH_VC0820 VC0820 1049 ani_aim MACH_ANI_AIM ANI_AIM 1050 jellyfish MACH_JELLYFISH JELLYFISH 1051 @@ -1093,3 +1093,67 @@ msm6100 MACH_MSM6100 MSM6100 1079 eti_b1 MACH_ETI_B1 ETI_B1 1080 za9l_series MACH_ZILOG_ZA9L ZILOG_ZA9L 1081 bit2440 MACH_BIT2440 BIT2440 1082 +nbi MACH_NBI NBI 1083 +smdk2443 MACH_SMDK2443 SMDK2443 1084 +vdavinci MACH_VDAVINCI VDAVINCI 1085 +atc6 MACH_ATC6 ATC6 1086 +multmdw MACH_MULTMDW MULTMDW 1087 +mba2440 MACH_MBA2440 MBA2440 1088 +ecsd MACH_ECSD ECSD 1089 +zire31 MACH_ZIRE31 ZIRE31 1090 +fsg MACH_FSG FSG 1091 +razor101 MACH_RAZOR101 RAZOR101 1092 +opera_tdm MACH_OPERA_TDM OPERA_TDM 1093 +comcerto MACH_COMCERTO COMCERTO 1094 +tb0319 MACH_TB0319 TB0319 1095 +kws8000 MACH_KWS8000 KWS8000 1096 +b2 MACH_B2 B2 1097 +lcl54 MACH_LCL54 LCL54 1098 +at91sam9260ek MACH_AT91SAM9260EK AT91SAM9260EK 1099 +glantank MACH_GLANTANK GLANTANK 1100 +n2100 MACH_N2100 N2100 1101 +n4100 MACH_N4100 N4100 1102 +rsc4 MACH_VERTICAL_RSC4 VERTICAL_RSC4 1103 +sg8100 MACH_SG8100 SG8100 1104 +im42xx MACH_IM42XX IM42XX 1105 +ftxx MACH_FTXX FTXX 1106 +lwfusion MACH_LWFUSION LWFUSION 1107 +qt2410 MACH_QT2410 QT2410 1108 +kixrp435 MACH_KIXRP435 KIXRP435 1109 +ccw9c MACH_CCW9C CCW9C 1110 +dabhs MACH_DABHS DABHS 1111 +gzmx MACH_GZMX GZMX 1112 +ipnw100ap MACH_IPNW100AP IPNW100AP 1113 +cc9p9360dev MACH_CC9P9360DEV CC9P9360DEV 1114 +cc9p9750dev MACH_CC9P9750DEV CC9P9750DEV 1115 +cc9p9360val MACH_CC9P9360VAL CC9P9360VAL 1116 +cc9p9750val MACH_CC9P9750VAL CC9P9750VAL 1117 +nx70v MACH_NX70V NX70V 1118 +at91rm9200df MACH_AT91RM9200DF AT91RM9200DF 1119 +se_pilot2 MACH_SE_PILOT2 SE_PILOT2 1120 +mtcn_t800 MACH_MTCN_T800 MTCN_T800 1121 +vcmx212 MACH_VCMX212 VCMX212 1122 +lynx MACH_LYNX LYNX 1123 +at91sam9260id MACH_AT91SAM9260ID AT91SAM9260ID 1124 +hw86052 MACH_HW86052 HW86052 1125 +pilz_pmi3 MACH_PILZ_PMI3 PILZ_PMI3 1126 +edb9302a MACH_EDB9302A EDB9302A 1127 +edb9307a MACH_EDB9307A EDB9307A 1128 +ct_dfs MACH_CT_DFS CT_DFS 1129 +pilz_pmi4 MACH_PILZ_PMI4 PILZ_PMI4 1130 +xceednp_ixp MACH_XCEEDNP_IXP XCEEDNP_IXP 1131 +smdk2442b MACH_SMDK2442B SMDK2442B 1132 +xnode MACH_XNODE XNODE 1133 +aidx270 MACH_AIDX270 AIDX270 1134 +rema MACH_REMA REMA 1135 +bps1000 MACH_BPS1000 BPS1000 1136 +hw90350 MACH_HW90350 HW90350 1137 +omap_sdp3430 MACH_OMAP_SDP3430 OMAP_SDP3430 1138 +bluetouch MACH_BLUETOUCH BLUETOUCH 1139 +vstms MACH_VSTMS VSTMS 1140 +xsbase270 MACH_XSBASE270 XSBASE270 1141 +at91sam9260ek_cn MACH_AT91SAM9260EK_CN AT91SAM9260EK_CN 1142 +adsturboxb MACH_ADSTURBOXB ADSTURBOXB 1143 +oti4110 MACH_OTI4110 OTI4110 1144 +hme_pxa MACH_HME_PXA HME_PXA 1145 +deisterdca MACH_DEISTERDCA DEISTERDCA 1146 diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h index 96fdf30f6a3b..f2797896e6d5 100644 --- a/arch/arm/vfp/vfp.h +++ b/arch/arm/vfp/vfp.h @@ -355,3 +355,18 @@ u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand); * we check for an error. */ #define VFP_EXCEPTION_ERROR ((u32)-1 & ~VFP_NAN_FLAG) + +/* + * A flag to tell vfp instruction type. + * OP_SCALAR - this operation always operates in scalar mode + * OP_SD - the instruction exceptionally writes to a single precision result. + * OP_DD - the instruction exceptionally writes to a double precision result. + */ +#define OP_SCALAR (1 << 0) +#define OP_SD (1 << 1) +#define OP_DD (1 << 1) + +struct op { + u32 (* const fn)(int dd, int dn, int dm, u32 fpscr); + u32 flags; +}; diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c index add48e36c2dc..4fc05ee0a2ef 100644 --- a/arch/arm/vfp/vfpdouble.c +++ b/arch/arm/vfp/vfpdouble.c @@ -659,22 +659,22 @@ static u32 vfp_double_ftosiz(int dd, int unused, int dm, u32 fpscr) } -static u32 (* const fop_extfns[32])(int dd, int unused, int dm, u32 fpscr) = { - [FEXT_TO_IDX(FEXT_FCPY)] = vfp_double_fcpy, - [FEXT_TO_IDX(FEXT_FABS)] = vfp_double_fabs, - [FEXT_TO_IDX(FEXT_FNEG)] = vfp_double_fneg, - [FEXT_TO_IDX(FEXT_FSQRT)] = vfp_double_fsqrt, - [FEXT_TO_IDX(FEXT_FCMP)] = vfp_double_fcmp, - [FEXT_TO_IDX(FEXT_FCMPE)] = vfp_double_fcmpe, - [FEXT_TO_IDX(FEXT_FCMPZ)] = vfp_double_fcmpz, - [FEXT_TO_IDX(FEXT_FCMPEZ)] = vfp_double_fcmpez, - [FEXT_TO_IDX(FEXT_FCVT)] = vfp_double_fcvts, - [FEXT_TO_IDX(FEXT_FUITO)] = vfp_double_fuito, - [FEXT_TO_IDX(FEXT_FSITO)] = vfp_double_fsito, - [FEXT_TO_IDX(FEXT_FTOUI)] = vfp_double_ftoui, - [FEXT_TO_IDX(FEXT_FTOUIZ)] = vfp_double_ftouiz, - [FEXT_TO_IDX(FEXT_FTOSI)] = vfp_double_ftosi, - [FEXT_TO_IDX(FEXT_FTOSIZ)] = vfp_double_ftosiz, +static struct op fops_ext[32] = { + [FEXT_TO_IDX(FEXT_FCPY)] = { vfp_double_fcpy, 0 }, + [FEXT_TO_IDX(FEXT_FABS)] = { vfp_double_fabs, 0 }, + [FEXT_TO_IDX(FEXT_FNEG)] = { vfp_double_fneg, 0 }, + [FEXT_TO_IDX(FEXT_FSQRT)] = { vfp_double_fsqrt, 0 }, + [FEXT_TO_IDX(FEXT_FCMP)] = { vfp_double_fcmp, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FCMPE)] = { vfp_double_fcmpe, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FCMPZ)] = { vfp_double_fcmpz, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FCMPEZ)] = { vfp_double_fcmpez, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FCVT)] = { vfp_double_fcvts, OP_SCALAR|OP_SD }, + [FEXT_TO_IDX(FEXT_FUITO)] = { vfp_double_fuito, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FSITO)] = { vfp_double_fsito, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FTOUI)] = { vfp_double_ftoui, OP_SCALAR|OP_SD }, + [FEXT_TO_IDX(FEXT_FTOUIZ)] = { vfp_double_ftouiz, OP_SCALAR|OP_SD }, + [FEXT_TO_IDX(FEXT_FTOSI)] = { vfp_double_ftosi, OP_SCALAR|OP_SD }, + [FEXT_TO_IDX(FEXT_FTOSIZ)] = { vfp_double_ftosiz, OP_SCALAR|OP_SD }, }; @@ -1108,16 +1108,16 @@ static u32 vfp_double_fdiv(int dd, int dn, int dm, u32 fpscr) return FPSCR_IOC; } -static u32 (* const fop_fns[16])(int dd, int dn, int dm, u32 fpscr) = { - [FOP_TO_IDX(FOP_FMAC)] = vfp_double_fmac, - [FOP_TO_IDX(FOP_FNMAC)] = vfp_double_fnmac, - [FOP_TO_IDX(FOP_FMSC)] = vfp_double_fmsc, - [FOP_TO_IDX(FOP_FNMSC)] = vfp_double_fnmsc, - [FOP_TO_IDX(FOP_FMUL)] = vfp_double_fmul, - [FOP_TO_IDX(FOP_FNMUL)] = vfp_double_fnmul, - [FOP_TO_IDX(FOP_FADD)] = vfp_double_fadd, - [FOP_TO_IDX(FOP_FSUB)] = vfp_double_fsub, - [FOP_TO_IDX(FOP_FDIV)] = vfp_double_fdiv, +static struct op fops[16] = { + [FOP_TO_IDX(FOP_FMAC)] = { vfp_double_fmac, 0 }, + [FOP_TO_IDX(FOP_FNMAC)] = { vfp_double_fnmac, 0 }, + [FOP_TO_IDX(FOP_FMSC)] = { vfp_double_fmsc, 0 }, + [FOP_TO_IDX(FOP_FNMSC)] = { vfp_double_fnmsc, 0 }, + [FOP_TO_IDX(FOP_FMUL)] = { vfp_double_fmul, 0 }, + [FOP_TO_IDX(FOP_FNMUL)] = { vfp_double_fnmul, 0 }, + [FOP_TO_IDX(FOP_FADD)] = { vfp_double_fadd, 0 }, + [FOP_TO_IDX(FOP_FSUB)] = { vfp_double_fsub, 0 }, + [FOP_TO_IDX(FOP_FDIV)] = { vfp_double_fdiv, 0 }, }; #define FREG_BANK(x) ((x) & 0x0c) @@ -1131,69 +1131,60 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr) unsigned int dn = vfp_get_dn(inst); unsigned int dm = vfp_get_dm(inst); unsigned int vecitr, veclen, vecstride; - u32 (*fop)(int, int, s32, u32); + struct op *fop; - veclen = fpscr & FPSCR_LENGTH_MASK; vecstride = (1 + ((fpscr & FPSCR_STRIDE_MASK) == FPSCR_STRIDE_MASK)) * 2; + fop = (op == FOP_EXT) ? &fops_ext[FEXT_TO_IDX(inst)] : &fops[FOP_TO_IDX(op)]; + /* * fcvtds takes an sN register number as destination, not dN. * It also always operates on scalars. */ - if ((inst & FEXT_MASK) == FEXT_FCVT) { - veclen = 0; + if (fop->flags & OP_SD) dest = vfp_get_sd(inst); - } else + else dest = vfp_get_dd(inst); /* * If destination bank is zero, vector length is always '1'. * ARM DDI0100F C5.1.3, C5.3.2. */ - if (FREG_BANK(dest) == 0) + if ((fop->flags & OP_SCALAR) || (FREG_BANK(dest) == 0)) veclen = 0; + else + veclen = fpscr & FPSCR_LENGTH_MASK; pr_debug("VFP: vecstride=%u veclen=%u\n", vecstride, (veclen >> FPSCR_LENGTH_BIT) + 1); - fop = (op == FOP_EXT) ? fop_extfns[FEXT_TO_IDX(inst)] : fop_fns[FOP_TO_IDX(op)]; - if (!fop) + if (!fop->fn) goto invalid; for (vecitr = 0; vecitr <= veclen; vecitr += 1 << FPSCR_LENGTH_BIT) { u32 except; + char type; - if (op == FOP_EXT && (inst & FEXT_MASK) == FEXT_FCVT) - pr_debug("VFP: itr%d (s%u) = op[%u] (d%u)\n", - vecitr >> FPSCR_LENGTH_BIT, - dest, dn, dm); - else if (op == FOP_EXT) - pr_debug("VFP: itr%d (d%u) = op[%u] (d%u)\n", + type = fop->flags & OP_SD ? 's' : 'd'; + if (op == FOP_EXT) + pr_debug("VFP: itr%d (%c%u) = op[%u] (d%u)\n", vecitr >> FPSCR_LENGTH_BIT, - dest, dn, dm); + type, dest, dn, dm); else - pr_debug("VFP: itr%d (d%u) = (d%u) op[%u] (d%u)\n", + pr_debug("VFP: itr%d (%c%u) = (d%u) op[%u] (d%u)\n", vecitr >> FPSCR_LENGTH_BIT, - dest, dn, FOP_TO_IDX(op), dm); + type, dest, dn, FOP_TO_IDX(op), dm); - except = fop(dest, dn, dm, fpscr); + except = fop->fn(dest, dn, dm, fpscr); pr_debug("VFP: itr%d: exceptions=%08x\n", vecitr >> FPSCR_LENGTH_BIT, except); exceptions |= except; /* - * This ensures that comparisons only operate on scalars; - * comparisons always return with one FPSCR status bit set. - */ - if (except & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V)) - break; - - /* * CHECK: It appears to be undefined whether we stop when * we encounter an exception. We continue. */ - dest = FREG_BANK(dest) + ((FREG_IDX(dest) + vecstride) & 6); dn = FREG_BANK(dn) + ((FREG_IDX(dn) + vecstride) & 6); if (FREG_BANK(dm) != 0) diff --git a/arch/arm/vfp/vfpinstr.h b/arch/arm/vfp/vfpinstr.h index 6c819aeae006..7f343a4beca0 100644 --- a/arch/arm/vfp/vfpinstr.h +++ b/arch/arm/vfp/vfpinstr.h @@ -73,14 +73,14 @@ #define fmrx(_vfp_) ({ \ u32 __v; \ - asm("mrc%? p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmrx %0, " #_vfp_ \ - : "=r" (__v)); \ + asm("mrc p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmrx %0, " #_vfp_ \ + : "=r" (__v) : : "cc"); \ __v; \ }) #define fmxr(_vfp_,_var_) \ - asm("mcr%? p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmxr " #_vfp_ ", %0" \ - : : "r" (_var_)) + asm("mcr p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmxr " #_vfp_ ", %0" \ + : : "r" (_var_) : "cc") u32 vfp_single_cpdo(u32 inst, u32 fpscr); u32 vfp_single_cprt(u32 inst, u32 fpscr, struct pt_regs *regs); diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 4178f6cc3d37..dedbb449632e 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -40,10 +40,19 @@ unsigned int VFP_arch; static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) { struct thread_info *thread = v; - union vfp_state *vfp = &thread->vfpstate; + union vfp_state *vfp; - switch (cmd) { - case THREAD_NOTIFY_FLUSH: + if (likely(cmd == THREAD_NOTIFY_SWITCH)) { + /* + * Always disable VFP so we can lazily save/restore the + * old state. + */ + fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE); + return NOTIFY_DONE; + } + + vfp = &thread->vfpstate; + if (cmd == THREAD_NOTIFY_FLUSH) { /* * Per-thread VFP initialisation. */ @@ -56,29 +65,12 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) * Disable VFP to ensure we initialise it first. */ fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE); - - /* - * FALLTHROUGH: Ensure we don't try to overwrite our newly - * initialised state information on the first fault. - */ - - case THREAD_NOTIFY_RELEASE: - /* - * Per-thread VFP cleanup. - */ - if (last_VFP_context == vfp) - last_VFP_context = NULL; - break; - - case THREAD_NOTIFY_SWITCH: - /* - * Always disable VFP so we can lazily save/restore the - * old state. - */ - fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE); - break; } + /* flush and release case: Per-thread VFP cleanup. */ + if (last_VFP_context == vfp) + last_VFP_context = NULL; + return NOTIFY_DONE; } diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c index 8f6c179cafbe..ab5e9503bae5 100644 --- a/arch/arm/vfp/vfpsingle.c +++ b/arch/arm/vfp/vfpsingle.c @@ -702,22 +702,22 @@ static u32 vfp_single_ftosiz(int sd, int unused, s32 m, u32 fpscr) return vfp_single_ftosi(sd, unused, m, FPSCR_ROUND_TOZERO); } -static u32 (* const fop_extfns[32])(int sd, int unused, s32 m, u32 fpscr) = { - [FEXT_TO_IDX(FEXT_FCPY)] = vfp_single_fcpy, - [FEXT_TO_IDX(FEXT_FABS)] = vfp_single_fabs, - [FEXT_TO_IDX(FEXT_FNEG)] = vfp_single_fneg, - [FEXT_TO_IDX(FEXT_FSQRT)] = vfp_single_fsqrt, - [FEXT_TO_IDX(FEXT_FCMP)] = vfp_single_fcmp, - [FEXT_TO_IDX(FEXT_FCMPE)] = vfp_single_fcmpe, - [FEXT_TO_IDX(FEXT_FCMPZ)] = vfp_single_fcmpz, - [FEXT_TO_IDX(FEXT_FCMPEZ)] = vfp_single_fcmpez, - [FEXT_TO_IDX(FEXT_FCVT)] = vfp_single_fcvtd, - [FEXT_TO_IDX(FEXT_FUITO)] = vfp_single_fuito, - [FEXT_TO_IDX(FEXT_FSITO)] = vfp_single_fsito, - [FEXT_TO_IDX(FEXT_FTOUI)] = vfp_single_ftoui, - [FEXT_TO_IDX(FEXT_FTOUIZ)] = vfp_single_ftouiz, - [FEXT_TO_IDX(FEXT_FTOSI)] = vfp_single_ftosi, - [FEXT_TO_IDX(FEXT_FTOSIZ)] = vfp_single_ftosiz, +static struct op fops_ext[32] = { + [FEXT_TO_IDX(FEXT_FCPY)] = { vfp_single_fcpy, 0 }, + [FEXT_TO_IDX(FEXT_FABS)] = { vfp_single_fabs, 0 }, + [FEXT_TO_IDX(FEXT_FNEG)] = { vfp_single_fneg, 0 }, + [FEXT_TO_IDX(FEXT_FSQRT)] = { vfp_single_fsqrt, 0 }, + [FEXT_TO_IDX(FEXT_FCMP)] = { vfp_single_fcmp, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FCMPE)] = { vfp_single_fcmpe, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FCMPZ)] = { vfp_single_fcmpz, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FCMPEZ)] = { vfp_single_fcmpez, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FCVT)] = { vfp_single_fcvtd, OP_SCALAR|OP_DD }, + [FEXT_TO_IDX(FEXT_FUITO)] = { vfp_single_fuito, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FSITO)] = { vfp_single_fsito, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FTOUI)] = { vfp_single_ftoui, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FTOUIZ)] = { vfp_single_ftouiz, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FTOSI)] = { vfp_single_ftosi, OP_SCALAR }, + [FEXT_TO_IDX(FEXT_FTOSIZ)] = { vfp_single_ftosiz, OP_SCALAR }, }; @@ -1151,16 +1151,16 @@ static u32 vfp_single_fdiv(int sd, int sn, s32 m, u32 fpscr) return FPSCR_IOC; } -static u32 (* const fop_fns[16])(int sd, int sn, s32 m, u32 fpscr) = { - [FOP_TO_IDX(FOP_FMAC)] = vfp_single_fmac, - [FOP_TO_IDX(FOP_FNMAC)] = vfp_single_fnmac, - [FOP_TO_IDX(FOP_FMSC)] = vfp_single_fmsc, - [FOP_TO_IDX(FOP_FNMSC)] = vfp_single_fnmsc, - [FOP_TO_IDX(FOP_FMUL)] = vfp_single_fmul, - [FOP_TO_IDX(FOP_FNMUL)] = vfp_single_fnmul, - [FOP_TO_IDX(FOP_FADD)] = vfp_single_fadd, - [FOP_TO_IDX(FOP_FSUB)] = vfp_single_fsub, - [FOP_TO_IDX(FOP_FDIV)] = vfp_single_fdiv, +static struct op fops[16] = { + [FOP_TO_IDX(FOP_FMAC)] = { vfp_single_fmac, 0 }, + [FOP_TO_IDX(FOP_FNMAC)] = { vfp_single_fnmac, 0 }, + [FOP_TO_IDX(FOP_FMSC)] = { vfp_single_fmsc, 0 }, + [FOP_TO_IDX(FOP_FNMSC)] = { vfp_single_fnmsc, 0 }, + [FOP_TO_IDX(FOP_FMUL)] = { vfp_single_fmul, 0 }, + [FOP_TO_IDX(FOP_FNMUL)] = { vfp_single_fnmul, 0 }, + [FOP_TO_IDX(FOP_FADD)] = { vfp_single_fadd, 0 }, + [FOP_TO_IDX(FOP_FSUB)] = { vfp_single_fsub, 0 }, + [FOP_TO_IDX(FOP_FDIV)] = { vfp_single_fdiv, 0 }, }; #define FREG_BANK(x) ((x) & 0x18) @@ -1174,70 +1174,63 @@ u32 vfp_single_cpdo(u32 inst, u32 fpscr) unsigned int sn = vfp_get_sn(inst); unsigned int sm = vfp_get_sm(inst); unsigned int vecitr, veclen, vecstride; - u32 (*fop)(int, int, s32, u32); + struct op *fop; - veclen = fpscr & FPSCR_LENGTH_MASK; vecstride = 1 + ((fpscr & FPSCR_STRIDE_MASK) == FPSCR_STRIDE_MASK); + fop = (op == FOP_EXT) ? &fops_ext[FEXT_TO_IDX(inst)] : &fops[FOP_TO_IDX(op)]; + /* * fcvtsd takes a dN register number as destination, not sN. * Technically, if bit 0 of dd is set, this is an invalid * instruction. However, we ignore this for efficiency. * It also only operates on scalars. */ - if ((inst & FEXT_MASK) == FEXT_FCVT) { - veclen = 0; + if (fop->flags & OP_DD) dest = vfp_get_dd(inst); - } else + else dest = vfp_get_sd(inst); /* * If destination bank is zero, vector length is always '1'. * ARM DDI0100F C5.1.3, C5.3.2. */ - if (FREG_BANK(dest) == 0) + if ((fop->flags & OP_SCALAR) || FREG_BANK(dest) == 0) veclen = 0; + else + veclen = fpscr & FPSCR_LENGTH_MASK; pr_debug("VFP: vecstride=%u veclen=%u\n", vecstride, (veclen >> FPSCR_LENGTH_BIT) + 1); - fop = (op == FOP_EXT) ? fop_extfns[FEXT_TO_IDX(inst)] : fop_fns[FOP_TO_IDX(op)]; - if (!fop) + if (!fop->fn) goto invalid; for (vecitr = 0; vecitr <= veclen; vecitr += 1 << FPSCR_LENGTH_BIT) { s32 m = vfp_get_float(sm); u32 except; + char type; - if (op == FOP_EXT && (inst & FEXT_MASK) == FEXT_FCVT) - pr_debug("VFP: itr%d (d%u) = op[%u] (s%u=%08x)\n", - vecitr >> FPSCR_LENGTH_BIT, dest, sn, sm, m); - else if (op == FOP_EXT) - pr_debug("VFP: itr%d (s%u) = op[%u] (s%u=%08x)\n", - vecitr >> FPSCR_LENGTH_BIT, dest, sn, sm, m); + type = fop->flags & OP_DD ? 'd' : 's'; + if (op == FOP_EXT) + pr_debug("VFP: itr%d (%c%u) = op[%u] (s%u=%08x)\n", + vecitr >> FPSCR_LENGTH_BIT, type, dest, sn, + sm, m); else - pr_debug("VFP: itr%d (s%u) = (s%u) op[%u] (s%u=%08x)\n", - vecitr >> FPSCR_LENGTH_BIT, dest, sn, + pr_debug("VFP: itr%d (%c%u) = (s%u) op[%u] (s%u=%08x)\n", + vecitr >> FPSCR_LENGTH_BIT, type, dest, sn, FOP_TO_IDX(op), sm, m); - except = fop(dest, sn, m, fpscr); + except = fop->fn(dest, sn, m, fpscr); pr_debug("VFP: itr%d: exceptions=%08x\n", vecitr >> FPSCR_LENGTH_BIT, except); exceptions |= except; /* - * This ensures that comparisons only operate on scalars; - * comparisons always return with one FPSCR status bit set. - */ - if (except & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V)) - break; - - /* * CHECK: It appears to be undefined whether we stop when * we encounter an exception. We continue. */ - dest = FREG_BANK(dest) + ((FREG_IDX(dest) + vecstride) & 7); sn = FREG_BANK(sn) + ((FREG_IDX(sn) + vecstride) & 7); if (FREG_BANK(sm) != 0) diff --git a/arch/arm26/kernel/time.c b/arch/arm26/kernel/time.c index db63d75d0715..1206469b2b86 100644 --- a/arch/arm26/kernel/time.c +++ b/arch/arm26/kernel/time.c @@ -33,8 +33,6 @@ #include <asm/irq.h> #include <asm/ioc.h> -extern unsigned long wall_jiffies; - /* this needs a better home */ DEFINE_SPINLOCK(rtc_lock); @@ -136,16 +134,11 @@ void do_gettimeofday(struct timeval *tv) { unsigned long flags; unsigned long seq; - unsigned long usec, sec, lost; + unsigned long usec, sec; do { seq = read_seqbegin_irqsave(&xtime_lock, flags); usec = gettimeoffset(); - - lost = jiffies - wall_jiffies; - if (lost) - usec += lost * USECS_PER_JIFFY; - sec = xtime.tv_sec; usec += xtime.tv_nsec / 1000; } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); @@ -174,8 +167,7 @@ int do_settimeofday(struct timespec *tv) * wall time. Discover what correction gettimeofday() would have * done, and then undo it! */ - tv->tv_nsec -= 1000 * (gettimeoffset() + - (jiffies - wall_jiffies) * USECS_PER_JIFFY); + tv->tv_nsec -= 1000 * gettimeoffset(); while (tv->tv_nsec < 0) { tv->tv_nsec += NSEC_PER_SEC; @@ -194,7 +186,7 @@ EXPORT_SYMBOL(do_settimeofday); static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - do_timer(regs); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif diff --git a/arch/arm26/mm/fault.c b/arch/arm26/mm/fault.c index 761938b56679..a1f6d8a9cc32 100644 --- a/arch/arm26/mm/fault.c +++ b/arch/arm26/mm/fault.c @@ -155,7 +155,7 @@ __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr, */ good_area: if (READ_FAULT(fsr)) /* read? */ - mask = VM_READ|VM_EXEC; + mask = VM_READ|VM_EXEC|VM_WRITE; else mask = VM_WRITE; @@ -185,7 +185,7 @@ survive: } fault = -3; /* out of memory */ - if (tsk->pid != 1) + if (!is_init(tsk)) goto out; /* diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c index b0e6b5855a38..3e56b9f4358a 100644 --- a/arch/avr32/kernel/time.c +++ b/arch/avr32/kernel/time.c @@ -148,7 +148,7 @@ timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * Call the generic timer interrupt handler */ write_seqlock(&xtime_lock); - do_timer(regs); + do_timer(1); write_sequnlock(&xtime_lock); /* diff --git a/arch/avr32/mm/ioremap.c b/arch/avr32/mm/ioremap.c index 536021877df6..8cfec65e37f7 100644 --- a/arch/avr32/mm/ioremap.c +++ b/arch/avr32/mm/ioremap.c @@ -7,119 +7,11 @@ */ #include <linux/vmalloc.h> #include <linux/module.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/pgtable.h> -#include <asm/cacheflush.h> -#include <asm/tlbflush.h> #include <asm/addrspace.h> -static inline int remap_area_pte(pte_t *pte, unsigned long address, - unsigned long end, unsigned long phys_addr, - pgprot_t prot) -{ - unsigned long pfn; - - pfn = phys_addr >> PAGE_SHIFT; - do { - WARN_ON(!pte_none(*pte)); - - set_pte(pte, pfn_pte(pfn, prot)); - address += PAGE_SIZE; - pfn++; - pte++; - } while (address && (address < end)); - - return 0; -} - -static inline int remap_area_pmd(pmd_t *pmd, unsigned long address, - unsigned long end, unsigned long phys_addr, - pgprot_t prot) -{ - unsigned long next; - - phys_addr -= address; - - do { - pte_t *pte = pte_alloc_kernel(pmd, address); - if (!pte) - return -ENOMEM; - - next = (address + PMD_SIZE) & PMD_MASK; - if (remap_area_pte(pte, address, next, - address + phys_addr, prot)) - return -ENOMEM; - - address = next; - pmd++; - } while (address && (address < end)); - return 0; -} - -static int remap_area_pud(pud_t *pud, unsigned long address, - unsigned long end, unsigned long phys_addr, - pgprot_t prot) -{ - unsigned long next; - - phys_addr -= address; - - do { - pmd_t *pmd = pmd_alloc(&init_mm, pud, address); - if (!pmd) - return -ENOMEM; - next = (address + PUD_SIZE) & PUD_MASK; - if (remap_area_pmd(pmd, address, next, - phys_addr + address, prot)) - return -ENOMEM; - - address = next; - pud++; - } while (address && address < end); - - return 0; -} - -static int remap_area_pages(unsigned long address, unsigned long phys_addr, - size_t size, pgprot_t prot) -{ - unsigned long end = address + size; - unsigned long next; - pgd_t *pgd; - int err = 0; - - phys_addr -= address; - - pgd = pgd_offset_k(address); - flush_cache_all(); - BUG_ON(address >= end); - - spin_lock(&init_mm.page_table_lock); - do { - pud_t *pud = pud_alloc(&init_mm, pgd, address); - - err = -ENOMEM; - if (!pud) - break; - - next = (address + PGDIR_SIZE) & PGDIR_MASK; - if (next < address || next > end) - next = end; - err = remap_area_pud(pud, address, next, - phys_addr + address, prot); - if (err) - break; - - address = next; - pgd++; - } while (address && (address < end)); - - spin_unlock(&init_mm.page_table_lock); - flush_tlb_all(); - return err; -} - /* * Re-map an arbitrary physical address space into the kernel virtual * address space. Needed when the kernel wants to access physical @@ -128,7 +20,7 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr, void __iomem *__ioremap(unsigned long phys_addr, size_t size, unsigned long flags) { - void *addr; + unsigned long addr; struct vm_struct *area; unsigned long offset, last_addr; pgprot_t prot; @@ -159,7 +51,7 @@ void __iomem *__ioremap(unsigned long phys_addr, size_t size, phys_addr &= PAGE_MASK; size = PAGE_ALIGN(last_addr + 1) - phys_addr; - prot = __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY + prot = __pgprot(_PAGE_PRESENT | _PAGE_GLOBAL | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_TYPE_SMALL | flags); /* @@ -169,9 +61,9 @@ void __iomem *__ioremap(unsigned long phys_addr, size_t size, if (!area) return NULL; area->phys_addr = phys_addr; - addr = area->addr; - if (remap_area_pages((unsigned long)addr, phys_addr, size, prot)) { - vunmap(addr); + addr = (unsigned long )area->addr; + if (ioremap_page_range(addr, addr + size, phys_addr, prot)) { + vunmap((void *)addr); return NULL; } diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c index 9c22b76e129a..ebacf1457d91 100644 --- a/arch/cris/arch-v10/kernel/time.c +++ b/arch/cris/arch-v10/kernel/time.c @@ -227,7 +227,7 @@ timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) /* call the real timer interrupt handler */ - do_timer(regs); + do_timer(1); cris_do_profile(regs); /* Save profiling information */ diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c index 50f3f93293d6..be0a01657d4f 100644 --- a/arch/cris/arch-v32/kernel/time.c +++ b/arch/cris/arch-v32/kernel/time.c @@ -219,7 +219,7 @@ timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; /* call the real timer interrupt handler */ - do_timer(regs); + do_timer(1); /* * If we have an externally synchronized Linux clock, then update diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c index 66ba8898db07..0f9213cbd48e 100644 --- a/arch/cris/kernel/time.c +++ b/arch/cris/kernel/time.c @@ -37,7 +37,6 @@ int have_rtc; /* used to remember if we have an RTC or not */; #define TICK_SIZE tick -extern unsigned long wall_jiffies; extern unsigned long loops_per_jiffy; /* init/main.c */ unsigned long loops_per_usec; @@ -58,11 +57,6 @@ void do_gettimeofday(struct timeval *tv) local_irq_save(flags); local_irq_disable(); usec = do_gettimeoffset(); - { - unsigned long lost = jiffies - wall_jiffies; - if (lost) - usec += lost * (1000000 / HZ); - } /* * If time_adjust is negative then NTP is slowing the clock @@ -103,7 +97,6 @@ int do_settimeofday(struct timespec *tv) * made, and then undo it! */ nsec -= do_gettimeoffset() * NSEC_PER_USEC; - nsec -= (jiffies - wall_jiffies) * TICK_NSEC; wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); diff --git a/arch/cris/mm/ioremap.c b/arch/cris/mm/ioremap.c index 1780df3ed9e5..8b0b9348b574 100644 --- a/arch/cris/mm/ioremap.c +++ b/arch/cris/mm/ioremap.c @@ -10,93 +10,10 @@ */ #include <linux/vmalloc.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/pgalloc.h> -#include <asm/cacheflush.h> -#include <asm/tlbflush.h> #include <asm/arch/memmap.h> -static inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, - unsigned long phys_addr, pgprot_t prot) -{ - unsigned long end; - - address &= ~PMD_MASK; - end = address + size; - if (end > PMD_SIZE) - end = PMD_SIZE; - if (address >= end) - BUG(); - do { - if (!pte_none(*pte)) { - printk("remap_area_pte: page already exists\n"); - BUG(); - } - set_pte(pte, mk_pte_phys(phys_addr, prot)); - address += PAGE_SIZE; - phys_addr += PAGE_SIZE; - pte++; - } while (address && (address < end)); -} - -static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size, - unsigned long phys_addr, pgprot_t prot) -{ - unsigned long end; - - address &= ~PGDIR_MASK; - end = address + size; - if (end > PGDIR_SIZE) - end = PGDIR_SIZE; - phys_addr -= address; - if (address >= end) - BUG(); - do { - pte_t * pte = pte_alloc_kernel(pmd, address); - if (!pte) - return -ENOMEM; - remap_area_pte(pte, address, end - address, address + phys_addr, prot); - address = (address + PMD_SIZE) & PMD_MASK; - pmd++; - } while (address && (address < end)); - return 0; -} - -static int remap_area_pages(unsigned long address, unsigned long phys_addr, - unsigned long size, pgprot_t prot) -{ - int error; - pgd_t * dir; - unsigned long end = address + size; - - phys_addr -= address; - dir = pgd_offset(&init_mm, address); - flush_cache_all(); - if (address >= end) - BUG(); - do { - pud_t *pud; - pmd_t *pmd; - - error = -ENOMEM; - pud = pud_alloc(&init_mm, dir, address); - if (!pud) - break; - pmd = pmd_alloc(&init_mm, pud, address); - - if (!pmd) - break; - if (remap_area_pmd(pmd, address, end - address, - phys_addr + address, prot)) - break; - error = 0; - address = (address + PGDIR_SIZE) & PGDIR_MASK; - dir++; - } while (address && (address < end)); - flush_tlb_all(); - return error; -} - /* * Generic mapping function (not visible outside): */ @@ -135,7 +52,8 @@ void __iomem * __ioremap_prot(unsigned long phys_addr, unsigned long size, pgpro if (!area) return NULL; addr = (void __iomem *)area->addr; - if (remap_area_pages((unsigned long) addr, phys_addr, size, prot)) { + if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size, + phys_addr, prot)) { vfree((void __force *)addr); return NULL; } diff --git a/arch/frv/kernel/time.c b/arch/frv/kernel/time.c index 3d0284bccb94..7e55884135ed 100644 --- a/arch/frv/kernel/time.c +++ b/arch/frv/kernel/time.c @@ -70,7 +70,7 @@ static irqreturn_t timer_interrupt(int irq, void *dummy, struct pt_regs * regs) */ write_seqlock(&xtime_lock); - do_timer(regs); + do_timer(1); update_process_times(user_mode(regs)); profile_tick(CPU_PROFILING, regs); diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c index 688a5100604c..e569d17b4ae6 100644 --- a/arch/h8300/kernel/time.c +++ b/arch/h8300/kernel/time.c @@ -41,7 +41,7 @@ static void timer_interrupt(int irq, void *dummy, struct pt_regs * regs) /* may need to kick the hardware timer */ platform_timer_eoi(); - do_timer(regs); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif diff --git a/arch/i386/boot/video.S b/arch/i386/boot/video.S index 8c2a6faeeae5..2c5b5cc55f79 100644 --- a/arch/i386/boot/video.S +++ b/arch/i386/boot/video.S @@ -11,8 +11,6 @@ * */ -#include <linux/config.h> /* for CONFIG_VIDEO_* */ - /* Enable autodetection of SVGA adapters and modes. */ #undef CONFIG_VIDEO_SVGA diff --git a/arch/i386/defconfig b/arch/i386/defconfig index 1a29bfa26d0c..ee2d79bd8af7 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-git5 -# Tue Sep 26 09:30:47 2006 +# Linux kernel version: 2.6.18-git7 +# Wed Sep 27 21:53:10 2006 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y @@ -210,6 +210,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_PM=y CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set +CONFIG_PM_SYSFS_DEPRECATED=y # # ACPI (Advanced Configuration and Power Interface) Support @@ -292,6 +293,7 @@ CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCIEPORTBUS is not set CONFIG_PCI_MSI=y +# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set CONFIG_ISA_DMA_API=y # CONFIG_ISA is not set @@ -1427,6 +1429,7 @@ CONFIG_KPROBES=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_KERNEL=y diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index ff9ce4b5eaa8..b42f2d914af3 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -225,6 +225,7 @@ #include <linux/smp_lock.h> #include <linux/dmi.h> #include <linux/suspend.h> +#include <linux/kthread.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -402,8 +403,6 @@ static int realmode_power_off = 1; #else static int realmode_power_off; #endif -static int exit_kapmd __read_mostly; -static int kapmd_running __read_mostly; #ifdef CONFIG_APM_ALLOW_INTS static int allow_ints = 1; #else @@ -419,6 +418,8 @@ static const struct desc_struct bad_bios_desc = { 0, 0x00409200 }; static const char driver_version[] = "1.16ac"; /* no spaces */ +static struct task_struct *kapmd_task; + /* * APM event names taken from the APM 1.2 specification. These are * the message codes that the BIOS uses to tell us about events @@ -1423,7 +1424,7 @@ static void apm_mainloop(void) set_current_state(TASK_INTERRUPTIBLE); for (;;) { schedule_timeout(APM_CHECK_TIMEOUT); - if (exit_kapmd) + if (kthread_should_stop()) break; /* * Ok, check all events, check for idle (and mark us sleeping @@ -1706,12 +1707,6 @@ static int apm(void *unused) char * power_stat; char * bat_stat; - kapmd_running = 1; - - daemonize("kapmd"); - - current->flags |= PF_NOFREEZE; - #ifdef CONFIG_SMP /* 2002/08/01 - WT * This is to avoid random crashes at boot time during initialization @@ -1821,7 +1816,6 @@ static int apm(void *unused) console_blank_hook = NULL; #endif } - kapmd_running = 0; return 0; } @@ -2220,7 +2214,7 @@ static int __init apm_init(void) { struct proc_dir_entry *apm_proc; struct desc_struct *gdt; - int ret; + int err; dmi_check_system(apm_dmi_table); @@ -2329,12 +2323,17 @@ static int __init apm_init(void) if (apm_proc) apm_proc->owner = THIS_MODULE; - ret = kernel_thread(apm, NULL, CLONE_KERNEL | SIGCHLD); - if (ret < 0) { - printk(KERN_ERR "apm: disabled - Unable to start kernel thread.\n"); + kapmd_task = kthread_create(apm, NULL, "kapmd"); + if (IS_ERR(kapmd_task)) { + printk(KERN_ERR "apm: disabled - Unable to start kernel " + "thread.\n"); + err = PTR_ERR(kapmd_task); + kapmd_task = NULL; remove_proc_entry("apm", NULL); - return -ENOMEM; + return err; } + kapmd_task->flags |= PF_NOFREEZE; + wake_up_process(kapmd_task); if (num_online_cpus() > 1 && !smp ) { printk(KERN_NOTICE @@ -2384,9 +2383,10 @@ static void __exit apm_exit(void) remove_proc_entry("apm", NULL); if (power_off) pm_power_off = NULL; - exit_kapmd = 1; - while (kapmd_running) - schedule(); + if (kapmd_task) { + kthread_stop(kapmd_task); + kapmd_task = NULL; + } #ifdef CONFIG_PM_LEGACY pm_active = 0; #endif diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index ea19d091fd41..57c880bf0bd6 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -396,13 +396,13 @@ static int acpi_cpufreq_early_init_acpi(void) */ static int bios_with_sw_any_bug; -static int __init sw_any_bug_found(struct dmi_system_id *d) +static int sw_any_bug_found(struct dmi_system_id *d) { bios_with_sw_any_bug = 1; return 0; } -static struct dmi_system_id __initdata sw_any_bug_dmi_table[] = { +static struct dmi_system_id sw_any_bug_dmi_table[] = { { .callback = sw_any_bug_found, .ident = "Supermicro Server X6DLP", @@ -597,7 +597,6 @@ static struct cpufreq_driver acpi_cpufreq_driver = { .name = "acpi-cpufreq", .owner = THIS_MODULE, .attr = acpi_cpufreq_attr, - .flags = CPUFREQ_STICKY, }; @@ -608,7 +607,7 @@ acpi_cpufreq_init (void) acpi_cpufreq_early_init_acpi(); - return cpufreq_register_driver(&acpi_cpufreq_driver); + return cpufreq_register_driver(&acpi_cpufreq_driver); } diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index f5cc9f5c9bab..7233abe5d695 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -178,11 +178,17 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) safe_halt(); /* Change frequency on next halt or sleep */ wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - ACPI_FLUSH_CPU_CACHE(); - /* Invoke C3 */ - inb(cx_address); - /* Dummy op - must do something useless after P_LVL3 read */ - t = inl(acpi_fadt.xpm_tmr_blk.address); + if (port22_en) { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C1 */ + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 read */ + t = inl(acpi_fadt.xpm_tmr_blk.address); + } /* Disable bus ratio bit */ local_irq_disable(); @@ -567,16 +573,23 @@ static acpi_status longhaul_walk_callback(acpi_handle obj_handle, static int enable_arbiter_disable(void) { struct pci_dev *dev; + int reg; u8 pci_cmd; /* Find PLE133 host bridge */ + reg = 0x78; dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, NULL); + /* Find CLE266 host bridge */ + if (dev == NULL) { + reg = 0x76; + dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_862X_0, NULL); + } if (dev != NULL) { /* Enable access to port 0x22 */ - pci_read_config_byte(dev, 0x78, &pci_cmd); + pci_read_config_byte(dev, reg, &pci_cmd); if ( !(pci_cmd & 1<<7) ) { pci_cmd |= 1<<7; - pci_write_config_byte(dev, 0x78, pci_cmd); + pci_write_config_byte(dev, reg, pci_cmd); } return 1; } @@ -680,20 +693,25 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) if (longhaul_version == TYPE_POWERSAVER) { /* Check ACPI support for C3 state */ cx = &pr->power.states[ACPI_STATE_C3]; - if (cx->address == 0 || - (cx->latency > 1000 && ignore_latency == 0) ) + if (cx->address > 0 && + (cx->latency <= 1000 || ignore_latency != 0) ) { + goto print_support_type; + } + } + /* Check ACPI support for bus master arbiter disable */ + if (!pr->flags.bm_control) { + if (enable_arbiter_disable()) { + port22_en = 1; + } else { goto err_acpi; - - } else { - /* Check ACPI support for bus master arbiter disable */ - if (!pr->flags.bm_control) { - if (!enable_arbiter_disable()) { - printk(KERN_ERR PFX "No ACPI support. No VT8601 host bridge. Aborting.\n"); - return -ENODEV; - } else - port22_en = 1; } } +print_support_type: + if (!port22_en) { + printk (KERN_INFO PFX "Using ACPI support.\n"); + } else { + printk (KERN_INFO PFX "Using northbridge support.\n"); + } ret = longhaul_get_ranges(); if (ret != 0) @@ -716,7 +734,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) return 0; err_acpi: - printk(KERN_ERR PFX "No ACPI support for CPU frequency changes.\n"); + printk(KERN_ERR PFX "No ACPI support. No VT8601 or VT8623 northbridge. Aborting.\n"); return -ENODEV; } diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 7a9325349e94..e8993baf3d14 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -386,7 +386,7 @@ static int centrino_cpu_early_init_acpi(void) * than OS intended it to run at. Detect it and handle it cleanly. */ static int bios_with_sw_any_bug; -static int __init sw_any_bug_found(struct dmi_system_id *d) +static int sw_any_bug_found(struct dmi_system_id *d) { bios_with_sw_any_bug = 1; return 0; diff --git a/arch/i386/kernel/crash.c b/arch/i386/kernel/crash.c index 67d297dc1003..144b43288965 100644 --- a/arch/i386/kernel/crash.c +++ b/arch/i386/kernel/crash.c @@ -23,6 +23,7 @@ #include <asm/hw_irq.h> #include <asm/apic.h> #include <asm/kdebug.h> +#include <asm/smp.h> #include <mach_ipi.h> @@ -88,7 +89,7 @@ static void crash_save_self(struct pt_regs *regs) { int cpu; - cpu = smp_processor_id(); + cpu = safe_smp_processor_id(); crash_save_this_cpu(regs, cpu); } @@ -133,7 +134,10 @@ static int crash_nmi_callback(struct notifier_block *self, static void smp_send_nmi_allbutself(void) { - send_IPI_allbutself(NMI_VECTOR); + cpumask_t mask = cpu_online_map; + cpu_clear(safe_smp_processor_id(), mask); + if (!cpus_empty(mask)) + send_IPI_mask(mask, NMI_VECTOR); } static struct notifier_block crash_nmi_nb = { @@ -185,7 +189,7 @@ void machine_crash_shutdown(struct pt_regs *regs) local_irq_disable(); /* Make a note of crashing cpu. Will be used in NMI callback.*/ - crashing_cpu = smp_processor_id(); + crashing_cpu = safe_smp_processor_id(); nmi_shootdown_cpus(); lapic_shutdown(); #if defined(CONFIG_X86_IO_APIC) diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c index fe158042110b..f9436989473c 100644 --- a/arch/i386/kernel/efi.c +++ b/arch/i386/kernel/efi.c @@ -65,7 +65,7 @@ static unsigned long efi_rt_eflags; static DEFINE_SPINLOCK(efi_rt_lock); static pgd_t efi_bak_pg_dir_pointer[2]; -static void efi_call_phys_prelog(void) +static void efi_call_phys_prelog(void) __acquires(efi_rt_lock) { unsigned long cr4; unsigned long temp; @@ -109,7 +109,7 @@ static void efi_call_phys_prelog(void) load_gdt(cpu_gdt_descr); } -static void efi_call_phys_epilog(void) +static void efi_call_phys_epilog(void) __releases(efi_rt_lock) { unsigned long cr4; struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, 0); diff --git a/arch/i386/kernel/i8237.c b/arch/i386/kernel/i8237.c index c36d1c006c2f..6f508e8d7c57 100644 --- a/arch/i386/kernel/i8237.c +++ b/arch/i386/kernel/i8237.c @@ -2,6 +2,11 @@ * i8237.c: 8237A DMA controller suspend functions. * * Written by Pierre Ossman, 2005. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. */ #include <linux/init.h> diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index dbda706fdd14..3e8e3adb0489 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -13,7 +13,6 @@ * Mikael Pettersson : PM converted to driver model. Disable/enable API. */ -#include <linux/config.h> #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/module.h> @@ -31,6 +30,9 @@ #include "mach_traps.h" +int unknown_nmi_panic; +int nmi_watchdog_enabled; + /* perfctr_nmi_owner tracks the ownership of the perfctr registers: * evtsel_nmi_owner tracks the ownership of the event selection * - different performance counters/ event selection may be reserved for diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 8c190ca7ae44..96cd0232e1e0 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -425,13 +425,12 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long esp, tsk = current; if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) { - p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL); + p->thread.io_bitmap_ptr = kmemdup(tsk->thread.io_bitmap_ptr, + IO_BITMAP_BYTES, GFP_KERNEL); if (!p->thread.io_bitmap_ptr) { p->thread.io_bitmap_max = 0; return -ENOMEM; } - memcpy(p->thread.io_bitmap_ptr, tsk->thread.io_bitmap_ptr, - IO_BITMAP_BYTES); set_tsk_thread_flag(p, TIF_IO_BITMAP); } diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 814cdebf7377..000cf03751fe 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -209,9 +209,6 @@ static struct resource adapter_rom_resources[] = { { .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM } }; -#define ADAPTER_ROM_RESOURCES \ - (sizeof adapter_rom_resources / sizeof adapter_rom_resources[0]) - static struct resource video_rom_resource = { .name = "Video ROM", .start = 0xc0000, @@ -273,9 +270,6 @@ static struct resource standard_io_resources[] = { { .flags = IORESOURCE_BUSY | IORESOURCE_IO } }; -#define STANDARD_IO_RESOURCES \ - (sizeof standard_io_resources / sizeof standard_io_resources[0]) - #define romsignature(x) (*(unsigned short *)(x) == 0xaa55) static int __init romchecksum(unsigned char *rom, unsigned long length) @@ -332,7 +326,7 @@ static void __init probe_roms(void) } /* check for adapter roms on 2k boundaries */ - for (i = 0; i < ADAPTER_ROM_RESOURCES && start < upper; start += 2048) { + for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; start += 2048) { rom = isa_bus_to_virt(start); if (!romsignature(rom)) continue; @@ -1272,7 +1266,7 @@ static int __init request_standard_resources(void) request_resource(&iomem_resource, &video_ram_resource); /* request I/O space for devices used on all i[345]86 PCs */ - for (i = 0; i < STANDARD_IO_RESOURCES; i++) + for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) request_resource(&ioport_resource, &standard_io_resources[i]); return 0; } diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c index 465188e2d701..1b080ab8a49f 100644 --- a/arch/i386/kernel/smp.c +++ b/arch/i386/kernel/smp.c @@ -700,3 +700,30 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info, return 0; } EXPORT_SYMBOL(smp_call_function_single); + +static int convert_apicid_to_cpu(int apic_id) +{ + int i; + + for (i = 0; i < NR_CPUS; i++) { + if (x86_cpu_to_apicid[i] == apic_id) + return i; + } + return -1; +} + +int safe_smp_processor_id(void) +{ + int apicid, cpuid; + + if (!boot_cpu_has(X86_FEATURE_APIC)) + return 0; + + apicid = hard_smp_processor_id(); + if (apicid == BAD_APICID) + return 0; + + cpuid = convert_apicid_to_cpu(apicid); + + return cpuid >= 0 ? cpuid : 0; +} diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 020d873b7d21..0831f709f777 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -102,6 +102,8 @@ u8 x86_cpu_to_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = 0xff }; EXPORT_SYMBOL(x86_cpu_to_apicid); +u8 apicid_2_node[MAX_APICID]; + /* * Trampoline 80x86 program as an array. */ @@ -645,7 +647,7 @@ static void map_cpu_to_logical_apicid(void) { int cpu = smp_processor_id(); int apicid = logical_smp_processor_id(); - int node = apicid_to_node(apicid); + int node = apicid_to_node(hard_smp_processor_id()); if (!node_online(node)) node = first_online_node; @@ -954,6 +956,7 @@ static int __devinit do_boot_cpu(int apicid, int cpu) irq_ctx_init(cpu); + x86_cpu_to_apicid[cpu] = apicid; /* * This grunge runs the startup process for * the targeted processor. @@ -1058,7 +1061,7 @@ static void __cpuinit do_warm_boot_cpu(void *p) static int __cpuinit __smp_prepare_cpu(int cpu) { - DECLARE_COMPLETION(done); + DECLARE_COMPLETION_ONSTACK(done); struct warm_boot_cpu_info info; struct work_struct task; int apicid, ret; diff --git a/arch/i386/kernel/srat.c b/arch/i386/kernel/srat.c index 32413122c4c2..f7e735c077c3 100644 --- a/arch/i386/kernel/srat.c +++ b/arch/i386/kernel/srat.c @@ -30,6 +30,7 @@ #include <linux/nodemask.h> #include <asm/srat.h> #include <asm/topology.h> +#include <asm/smp.h> /* * proximity macros and definitions @@ -54,6 +55,7 @@ struct node_memory_chunk_s { static struct node_memory_chunk_s node_memory_chunk[MAXCHUNKS]; static int num_memory_chunks; /* total number of memory chunks */ +static u8 __initdata apicid_to_pxm[MAX_APICID]; extern void * boot_ioremap(unsigned long, unsigned long); @@ -69,6 +71,8 @@ static void __init parse_cpu_affinity_structure(char *p) /* mark this node as "seen" in node bitmap */ BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain); + apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain; + printk("CPU 0x%02X in proximity domain 0x%02X\n", cpu_affinity->apic_id, cpu_affinity->proximity_domain); } @@ -235,6 +239,9 @@ static int __init acpi20_parse_srat(struct acpi_table_srat *sratp) printk("Number of logical nodes in system = %d\n", num_online_nodes()); printk("Number of memory chunks in system = %d\n", num_memory_chunks); + for (i = 0; i < MAX_APICID; i++) + apicid_2_node[i] = pxm_to_node(apicid_to_pxm[i]); + for (j = 0; j < num_memory_chunks; j++){ struct node_memory_chunk_s * chunk = &node_memory_chunk[j]; printk("chunk %d nid %d start_pfn %08lx end_pfn %08lx\n", diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index 86944acfb647..58a2d5582419 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -76,8 +76,6 @@ int pit_latch_buggy; /* extern */ unsigned int cpu_khz; /* Detected as we calibrate the TSC */ EXPORT_SYMBOL(cpu_khz); -extern unsigned long wall_jiffies; - DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); @@ -329,7 +327,6 @@ static int timer_resume(struct sys_device *dev) do_settimeofday(&ts); write_seqlock_irqsave(&xtime_lock, flags); jiffies_64 += sleep_length; - wall_jiffies += sleep_length; write_sequnlock_irqrestore(&xtime_lock, flags); touch_softlockup_watchdog(); return 0; diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index a13037fe0ee3..6820b8d643c7 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -57,6 +57,8 @@ #include "mach_traps.h" +int panic_on_unrecovered_nmi; + asmlinkage int system_call(void); struct desc_struct default_ldt[] = { { 0, 0 }, { 0, 0 }, { 0, 0 }, diff --git a/arch/i386/lib/delay.c b/arch/i386/lib/delay.c index 3c0714c4b669..f6edb11364df 100644 --- a/arch/i386/lib/delay.c +++ b/arch/i386/lib/delay.c @@ -11,7 +11,6 @@ */ #include <linux/module.h> -#include <linux/config.h> #include <linux/sched.h> #include <linux/delay.h> diff --git a/arch/i386/lib/usercopy.c b/arch/i386/lib/usercopy.c index efc7e7d5f4d0..08502fc6d0cb 100644 --- a/arch/i386/lib/usercopy.c +++ b/arch/i386/lib/usercopy.c @@ -739,7 +739,7 @@ survive: retval = get_user_pages(current, current->mm, (unsigned long )to, 1, 1, 0, &pg, NULL); - if (retval == -ENOMEM && current->pid == 1) { + if (retval == -ENOMEM && is_init(current)) { up_read(¤t->mm->mmap_sem); blk_congestion_wait(WRITE, HZ/50); goto survive; diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c index 6c86575ffdcb..856c73fcb7e7 100644 --- a/arch/i386/mach-voyager/voyager_smp.c +++ b/arch/i386/mach-voyager/voyager_smp.c @@ -99,6 +99,7 @@ static void do_boot_cpu(__u8 cpuid); static void do_quad_bootstrap(void); int hard_smp_processor_id(void); +int safe_smp_processor_id(void); /* Inline functions */ static inline void @@ -1247,6 +1248,12 @@ hard_smp_processor_id(void) return 0; } +int +safe_smp_processor_id(void) +{ + return hard_smp_processor_id(); +} + /* broadcast a halt to all other CPUs */ void smp_send_stop(void) diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c index 5e17a3f43b41..2581575786c1 100644 --- a/arch/i386/mm/fault.c +++ b/arch/i386/mm/fault.c @@ -440,7 +440,7 @@ good_area: case 1: /* read, present */ goto bad_area; case 0: /* read, not present */ - if (!(vma->vm_flags & (VM_READ | VM_EXEC))) + if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) goto bad_area; } @@ -589,7 +589,7 @@ no_context: */ out_of_memory: up_read(&mm->mmap_sem); - if (tsk->pid == 1) { + if (is_init(tsk)) { yield(); down_read(&mm->mmap_sem); goto survive; diff --git a/arch/i386/mm/highmem.c b/arch/i386/mm/highmem.c index ba44000b9069..f9f647cdbc7b 100644 --- a/arch/i386/mm/highmem.c +++ b/arch/i386/mm/highmem.c @@ -38,22 +38,19 @@ void *kmap_atomic(struct page *page, enum km_type type) idx = type + KM_TYPE_NR*smp_processor_id(); vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); -#ifdef CONFIG_DEBUG_HIGHMEM if (!pte_none(*(kmap_pte-idx))) BUG(); -#endif set_pte(kmap_pte-idx, mk_pte(page, kmap_prot)); - __flush_tlb_one(vaddr); return (void*) vaddr; } void kunmap_atomic(void *kvaddr, enum km_type type) { -#ifdef CONFIG_DEBUG_HIGHMEM unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id(); +#ifdef CONFIG_DEBUG_HIGHMEM if (vaddr >= PAGE_OFFSET && vaddr < (unsigned long)high_memory) { dec_preempt_count(); preempt_check_resched(); @@ -62,14 +59,14 @@ void kunmap_atomic(void *kvaddr, enum km_type type) if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN+idx)) BUG(); - +#endif /* - * force other mappings to Oops if they'll try to access - * this pte without first remap it + * Force other mappings to Oops if they'll try to access this pte + * without first remap it. Keeping stale mappings around is a bad idea + * also, in case the page changes cacheability attributes or becomes + * a protected page in a hypervisor. */ - pte_clear(&init_mm, vaddr, kmap_pte-idx); - __flush_tlb_one(vaddr); -#endif + kpte_clear_flush(kmap_pte-idx, vaddr); dec_preempt_count(); preempt_check_resched(); @@ -88,7 +85,6 @@ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type) idx = type + KM_TYPE_NR*smp_processor_id(); vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot)); - __flush_tlb_one(vaddr); return (void*) vaddr; } diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c index 4a5a914b3432..90089c14c23d 100644 --- a/arch/i386/mm/init.c +++ b/arch/i386/mm/init.c @@ -493,6 +493,7 @@ int __init set_kernel_exec(unsigned long vaddr, int enable) pte->pte_high &= ~(1 << (_PAGE_BIT_NX - 32)); else pte->pte_high |= 1 << (_PAGE_BIT_NX - 32); + pte_update_defer(&init_mm, vaddr, pte); __flush_tlb_all(); out: return ret; diff --git a/arch/i386/mm/ioremap.c b/arch/i386/mm/ioremap.c index 247fde76aaed..fff08ae7b5ed 100644 --- a/arch/i386/mm/ioremap.c +++ b/arch/i386/mm/ioremap.c @@ -12,7 +12,7 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/module.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/fixmap.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> @@ -21,82 +21,6 @@ #define ISA_START_ADDRESS 0xa0000 #define ISA_END_ADDRESS 0x100000 -static int ioremap_pte_range(pmd_t *pmd, unsigned long addr, - unsigned long end, unsigned long phys_addr, unsigned long flags) -{ - pte_t *pte; - unsigned long pfn; - - pfn = phys_addr >> PAGE_SHIFT; - pte = pte_alloc_kernel(pmd, addr); - if (!pte) - return -ENOMEM; - do { - BUG_ON(!pte_none(*pte)); - set_pte(pte, pfn_pte(pfn, __pgprot(_PAGE_PRESENT | _PAGE_RW | - _PAGE_DIRTY | _PAGE_ACCESSED | flags))); - pfn++; - } while (pte++, addr += PAGE_SIZE, addr != end); - return 0; -} - -static inline int ioremap_pmd_range(pud_t *pud, unsigned long addr, - unsigned long end, unsigned long phys_addr, unsigned long flags) -{ - pmd_t *pmd; - unsigned long next; - - phys_addr -= addr; - pmd = pmd_alloc(&init_mm, pud, addr); - if (!pmd) - return -ENOMEM; - do { - next = pmd_addr_end(addr, end); - if (ioremap_pte_range(pmd, addr, next, phys_addr + addr, flags)) - return -ENOMEM; - } while (pmd++, addr = next, addr != end); - return 0; -} - -static inline int ioremap_pud_range(pgd_t *pgd, unsigned long addr, - unsigned long end, unsigned long phys_addr, unsigned long flags) -{ - pud_t *pud; - unsigned long next; - - phys_addr -= addr; - pud = pud_alloc(&init_mm, pgd, addr); - if (!pud) - return -ENOMEM; - do { - next = pud_addr_end(addr, end); - if (ioremap_pmd_range(pud, addr, next, phys_addr + addr, flags)) - return -ENOMEM; - } while (pud++, addr = next, addr != end); - return 0; -} - -static int ioremap_page_range(unsigned long addr, - unsigned long end, unsigned long phys_addr, unsigned long flags) -{ - pgd_t *pgd; - unsigned long next; - int err; - - BUG_ON(addr >= end); - flush_cache_all(); - phys_addr -= addr; - pgd = pgd_offset_k(addr); - do { - next = pgd_addr_end(addr, end); - err = ioremap_pud_range(pgd, addr, next, phys_addr+addr, flags); - if (err) - break; - } while (pgd++, addr = next, addr != end); - flush_tlb_all(); - return err; -} - /* * Generic mapping function (not visible outside): */ @@ -115,6 +39,7 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l void __iomem * addr; struct vm_struct * area; unsigned long offset, last_addr; + pgprot_t prot; /* Don't allow wraparound or zero size */ last_addr = phys_addr + size - 1; @@ -142,6 +67,9 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l return NULL; } + prot = __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY + | _PAGE_ACCESSED | flags); + /* * Mappings have to be page-aligned */ @@ -158,7 +86,7 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l area->phys_addr = phys_addr; addr = (void __iomem *) area->addr; if (ioremap_page_range((unsigned long) addr, - (unsigned long) addr + size, phys_addr, flags)) { + (unsigned long) addr + size, phys_addr, prot)) { vunmap((void __force *) addr); return NULL; } diff --git a/arch/i386/oprofile/op_model_ppro.c b/arch/i386/oprofile/op_model_ppro.c index f88e05ba8eb3..ca2447e05e15 100644 --- a/arch/i386/oprofile/op_model_ppro.c +++ b/arch/i386/oprofile/op_model_ppro.c @@ -138,11 +138,14 @@ static int ppro_check_ctrs(struct pt_regs * const regs, static void ppro_start(struct op_msrs const * const msrs) { unsigned int low,high; + int i; - if (reset_value[0]) { - CTRL_READ(low, high, msrs, 0); - CTRL_SET_ACTIVE(low); - CTRL_WRITE(low, high, msrs, 0); + for (i = 0; i < NUM_COUNTERS; ++i) { + if (reset_value[i]) { + CTRL_READ(low, high, msrs, i); + CTRL_SET_ACTIVE(low); + CTRL_WRITE(low, high, msrs, i); + } } } @@ -150,11 +153,14 @@ static void ppro_start(struct op_msrs const * const msrs) static void ppro_stop(struct op_msrs const * const msrs) { unsigned int low,high; + int i; - if (reset_value[0]) { - CTRL_READ(low, high, msrs, 0); + for (i = 0; i < NUM_COUNTERS; ++i) { + if (!reset_value[i]) + continue; + CTRL_READ(low, high, msrs, i); CTRL_SET_INACTIVE(low); - CTRL_WRITE(low, high, msrs, 0); + CTRL_WRITE(low, high, msrs, i); } } diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 05be8db58a8c..d0c3da3aa2aa 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -67,7 +67,10 @@ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) return 0; } -static inline void pci_exp_set_dev_base(unsigned int base, int bus, int devfn) +/* + * This is always called under pci_config_lock + */ +static void pci_exp_set_dev_base(unsigned int base, int bus, int devfn) { u32 dev_base = base | (bus << 20) | (devfn << 12); if (dev_base != mmcfg_last_accessed_device) { diff --git a/arch/ia64/hp/sim/simeth.c b/arch/ia64/hp/sim/simeth.c index b5195be62818..e1a1b11473e2 100644 --- a/arch/ia64/hp/sim/simeth.c +++ b/arch/ia64/hp/sim/simeth.c @@ -320,7 +320,7 @@ simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr) } printk(KERN_INFO "simeth_device_event: %s ipaddr=0x%x\n", - dev->name, htonl(ifa->ifa_local)); + dev->name, ntohl(ifa->ifa_local)); /* * XXX Fix me @@ -331,7 +331,7 @@ simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr) local = dev->priv; /* now do it for real */ r = event == NETDEV_UP ? - netdev_attach(local->simfd, dev->irq, htonl(ifa->ifa_local)): + netdev_attach(local->simfd, dev->irq, ntohl(ifa->ifa_local)): netdev_detach(local->simfd); printk(KERN_INFO "simeth: netdev_attach/detach: event=%s ->%d\n", diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index bfbd8986153b..663230183254 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -388,7 +388,7 @@ ia64_log_get(int sal_info_type, u8 **buffer, int irq_safe) { sal_log_record_header_t *log_buffer; u64 total_len = 0; - int s; + unsigned long s; IA64_LOG_LOCK(sal_info_type); diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 6928ef0d64d8..62e07f906e05 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -29,8 +29,6 @@ #include <asm/sections.h> #include <asm/system.h> -extern unsigned long wall_jiffies; - volatile int time_keeper_id = 0; /* smp_processor_id() of time-keeper */ #ifdef CONFIG_IA64_DEBUG_IRQ @@ -78,7 +76,7 @@ timer_interrupt (int irq, void *dev_id, struct pt_regs *regs) * xtime_lock. */ write_seqlock(&xtime_lock); - do_timer(regs); + do_timer(1); local_cpu_data->itm_next = new_itm; write_sequnlock(&xtime_lock); } else diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c index 14ef7cceb208..59f3ab937615 100644 --- a/arch/ia64/mm/fault.c +++ b/arch/ia64/mm/fault.c @@ -146,9 +146,11 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re # error File is out of sync with <linux/mm.h>. Please update. # endif + if (((isr >> IA64_ISR_R_BIT) & 1UL) && (!(vma->vm_flags & (VM_READ | VM_WRITE)))) + goto bad_area; + mask = ( (((isr >> IA64_ISR_X_BIT) & 1UL) << VM_EXEC_BIT) - | (((isr >> IA64_ISR_W_BIT) & 1UL) << VM_WRITE_BIT) - | (((isr >> IA64_ISR_R_BIT) & 1UL) << VM_READ_BIT)); + | (((isr >> IA64_ISR_W_BIT) & 1UL) << VM_WRITE_BIT)); if ((vma->vm_flags & mask) != mask) goto bad_area; @@ -278,7 +280,7 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re out_of_memory: up_read(&mm->mmap_sem); - if (current->pid == 1) { + if (is_init(current)) { yield(); down_read(&mm->mmap_sem); goto survive; diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c index 64e4c21f311c..7807fc5c0422 100644 --- a/arch/ia64/mm/numa.c +++ b/arch/ia64/mm/numa.c @@ -16,6 +16,7 @@ #include <linux/node.h> #include <linux/init.h> #include <linux/bootmem.h> +#include <linux/module.h> #include <asm/mmzone.h> #include <asm/numa.h> @@ -69,4 +70,21 @@ int early_pfn_to_nid(unsigned long pfn) return 0; } + +#ifdef CONFIG_MEMORY_HOTPLUG +/* + * SRAT information is stored in node_memblk[], then we can use SRAT + * information at memory-hot-add if necessary. + */ + +int memory_add_physaddr_to_nid(u64 addr) +{ + int nid = paddr_to_nid(addr); + if (nid < 0) + return 0; + return nid; +} + +EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); +#endif #endif diff --git a/arch/ia64/sn/pci/pcibr/pcibr_ate.c b/arch/ia64/sn/pci/pcibr/pcibr_ate.c index 1f0253bfe0a0..5eb1e1e078b4 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_ate.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_ate.c @@ -160,7 +160,7 @@ void pcibr_ate_free(struct pcibus_info *pcibus_info, int index) volatile u64 ate; int count; - u64 flags; + unsigned long flags; if (pcibr_invalidate_ate) { /* For debugging purposes, clear the valid bit in the ATE */ diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c index a86c7b945962..1ee977fb6ebb 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c @@ -237,7 +237,7 @@ void sn_dma_flush(u64 addr) int is_tio; int wid_num; int i, j; - u64 flags; + unsigned long flags; u64 itte; struct hubdev_info *hubinfo; struct sn_flush_device_kernel *p; diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c index ded0be07a476..d8af155db984 100644 --- a/arch/m32r/kernel/time.c +++ b/arch/m32r/kernel/time.c @@ -38,7 +38,6 @@ extern void send_IPI_allbutself(int, int); extern void smp_local_timer_interrupt(struct pt_regs *); #endif -extern unsigned long wall_jiffies; #define TICK_SIZE (tick_nsec / 1000) /* @@ -108,24 +107,17 @@ void do_gettimeofday(struct timeval *tv) unsigned long max_ntp_tick = tick_usec - tickadj; do { - unsigned long lost; - seq = read_seqbegin(&xtime_lock); usec = do_gettimeoffset(); - lost = jiffies - wall_jiffies; /* * If time_adjust is negative then NTP is slowing the clock * so make sure not to go into next possible interval. * Better to lose some accuracy than have time go backwards.. */ - if (unlikely(time_adjust < 0)) { + if (unlikely(time_adjust < 0)) usec = min(usec, max_ntp_tick); - if (lost) - usec += lost * max_ntp_tick; - } else if (unlikely(lost)) - usec += lost * tick_usec; sec = xtime.tv_sec; usec += (xtime.tv_nsec / 1000); @@ -158,7 +150,6 @@ int do_settimeofday(struct timespec *tv) * made, and then undo it! */ nsec -= do_gettimeoffset() * NSEC_PER_USEC; - nsec -= (jiffies - wall_jiffies) * TICK_NSEC; wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); @@ -202,7 +193,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) #ifndef CONFIG_SMP profile_tick(CPU_PROFILING, regs); #endif - do_timer(regs); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c index dc18a33eefef..8d5f551b5754 100644 --- a/arch/m32r/mm/fault.c +++ b/arch/m32r/mm/fault.c @@ -299,7 +299,7 @@ no_context: */ out_of_memory: up_read(&mm->mmap_sem); - if (tsk->pid == 1) { + if (is_init(tsk)) { yield(); down_read(&mm->mmap_sem); goto survive; diff --git a/arch/m32r/mm/ioremap.c b/arch/m32r/mm/ioremap.c index a151849a605e..5152c4e6ac80 100644 --- a/arch/m32r/mm/ioremap.c +++ b/arch/m32r/mm/ioremap.c @@ -20,92 +20,8 @@ #include <asm/byteorder.h> #include <linux/vmalloc.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/pgalloc.h> -#include <asm/cacheflush.h> -#include <asm/tlbflush.h> - -static inline void -remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, - unsigned long phys_addr, unsigned long flags) -{ - unsigned long end; - unsigned long pfn; - pgprot_t pgprot = __pgprot(_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_READ - | _PAGE_WRITE | flags); - - address &= ~PMD_MASK; - end = address + size; - if (end > PMD_SIZE) - end = PMD_SIZE; - if (address >= end) - BUG(); - pfn = phys_addr >> PAGE_SHIFT; - do { - if (!pte_none(*pte)) { - printk("remap_area_pte: page already exists\n"); - BUG(); - } - set_pte(pte, pfn_pte(pfn, pgprot)); - address += PAGE_SIZE; - pfn++; - pte++; - } while (address && (address < end)); -} - -static inline int -remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size, - unsigned long phys_addr, unsigned long flags) -{ - unsigned long end; - - address &= ~PGDIR_MASK; - end = address + size; - if (end > PGDIR_SIZE) - end = PGDIR_SIZE; - phys_addr -= address; - if (address >= end) - BUG(); - do { - pte_t * pte = pte_alloc_kernel(pmd, address); - if (!pte) - return -ENOMEM; - remap_area_pte(pte, address, end - address, address + phys_addr, flags); - address = (address + PMD_SIZE) & PMD_MASK; - pmd++; - } while (address && (address < end)); - return 0; -} - -static int -remap_area_pages(unsigned long address, unsigned long phys_addr, - unsigned long size, unsigned long flags) -{ - int error; - pgd_t * dir; - unsigned long end = address + size; - - phys_addr -= address; - dir = pgd_offset(&init_mm, address); - flush_cache_all(); - if (address >= end) - BUG(); - do { - pmd_t *pmd; - pmd = pmd_alloc(&init_mm, dir, address); - error = -ENOMEM; - if (!pmd) - break; - if (remap_area_pmd(pmd, address, end - address, - phys_addr + address, flags)) - break; - error = 0; - address = (address + PGDIR_SIZE) & PGDIR_MASK; - dir++; - } while (address && (address < end)); - flush_tlb_all(); - return error; -} /* * Generic mapping function (not visible outside): @@ -129,6 +45,7 @@ __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags) void __iomem * addr; struct vm_struct * area; unsigned long offset, last_addr; + pgprot_t pgprot; /* Don't allow wraparound or zero size */ last_addr = phys_addr + size - 1; @@ -157,6 +74,9 @@ __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags) return NULL; } + pgprot = __pgprot(_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_READ + | _PAGE_WRITE | flags); + /* * Mappings have to be page-aligned */ @@ -172,7 +92,8 @@ __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags) return NULL; area->phys_addr = phys_addr; addr = (void __iomem *) area->addr; - if (remap_area_pages((unsigned long)addr, phys_addr, size, flags)) { + if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size, + phys_addr, pgprot)) { vunmap((void __force *) addr); return NULL; } diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c index 98e4b1adfa29..6cfc984380d9 100644 --- a/arch/m68k/kernel/time.c +++ b/arch/m68k/kernel/time.c @@ -40,7 +40,7 @@ static inline int set_rtc_mmss(unsigned long nowtime) */ static irqreturn_t timer_interrupt(int irq, void *dummy, struct pt_regs * regs) { - do_timer(regs); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif @@ -96,31 +96,23 @@ void time_init(void) void do_gettimeofday(struct timeval *tv) { unsigned long flags; - extern unsigned long wall_jiffies; unsigned long seq; - unsigned long usec, sec, lost; + unsigned long usec, sec; unsigned long max_ntp_tick = tick_usec - tickadj; do { seq = read_seqbegin_irqsave(&xtime_lock, flags); usec = mach_gettimeoffset(); - lost = jiffies - wall_jiffies; /* * If time_adjust is negative then NTP is slowing the clock * so make sure not to go into next possible interval. * Better to lose some accuracy than have time go backwards.. */ - if (unlikely(time_adjust < 0)) { + if (unlikely(time_adjust < 0)) usec = min(usec, max_ntp_tick); - if (lost) - usec += lost * max_ntp_tick; - } - else if (unlikely(lost)) - usec += lost * tick_usec; - sec = xtime.tv_sec; usec += xtime.tv_nsec/1000; } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); @@ -141,7 +133,6 @@ int do_settimeofday(struct timespec *tv) { time_t wtm_sec, sec = tv->tv_sec; long wtm_nsec, nsec = tv->tv_nsec; - extern unsigned long wall_jiffies; if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) return -EINVAL; @@ -153,8 +144,7 @@ int do_settimeofday(struct timespec *tv) * Discover what correction gettimeofday * would have done, and then undo it! */ - nsec -= 1000 * (mach_gettimeoffset() + - (jiffies - wall_jiffies) * (1000000 / HZ)); + nsec -= 1000 * mach_gettimeoffset(); wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); diff --git a/arch/m68k/mm/fault.c b/arch/m68k/mm/fault.c index aec15270d334..911f2ce3f53e 100644 --- a/arch/m68k/mm/fault.c +++ b/arch/m68k/mm/fault.c @@ -144,7 +144,7 @@ good_area: case 1: /* read, present */ goto acc_err; case 0: /* read, not present */ - if (!(vma->vm_flags & (VM_READ | VM_EXEC))) + if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) goto acc_err; } @@ -181,7 +181,7 @@ good_area: */ out_of_memory: up_read(&mm->mmap_sem); - if (current->pid == 1) { + if (is_init(current)) { yield(); down_read(&mm->mmap_sem); goto survive; diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index f18b9d3ef16d..dc4ea7e074a6 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -65,7 +65,7 @@ static irqreturn_t sun3_int5(int irq, void *dev_id, struct pt_regs *fp) #ifdef CONFIG_SUN3 intersil_clear(); #endif - do_timer(fp); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(fp)); #endif diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c index 1db987272220..c5667bdddd5e 100644 --- a/arch/m68knommu/kernel/time.c +++ b/arch/m68knommu/kernel/time.c @@ -26,8 +26,6 @@ #define TICK_SIZE (tick_nsec / 1000) -extern unsigned long wall_jiffies; - static inline int set_rtc_mmss(unsigned long nowtime) { @@ -51,7 +49,7 @@ static irqreturn_t timer_interrupt(int irq, void *dummy, struct pt_regs * regs) write_seqlock(&xtime_lock); - do_timer(regs); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif @@ -124,15 +122,12 @@ void time_init(void) void do_gettimeofday(struct timeval *tv) { unsigned long flags; - unsigned long lost, seq; + unsigned long seq; unsigned long usec, sec; do { seq = read_seqbegin_irqsave(&xtime_lock, flags); usec = mach_gettimeoffset ? mach_gettimeoffset() : 0; - lost = jiffies - wall_jiffies; - if (lost) - usec += lost * (1000000 / HZ); sec = xtime.tv_sec; usec += (xtime.tv_nsec / 1000); } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c index 7fbea1bf7b48..0a067f3113a5 100644 --- a/arch/mips/au1000/common/time.c +++ b/arch/mips/au1000/common/time.c @@ -96,7 +96,7 @@ void mips_timer_interrupt(struct pt_regs *regs) timerlo = count; kstat_this_cpu.irqs[irq]++; - do_timer(regs); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif @@ -137,7 +137,7 @@ irqreturn_t counter0_irq(int irq, void *dev_id, struct pt_regs *regs) } while (time_elapsed > 0) { - do_timer(regs); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif @@ -156,7 +156,7 @@ irqreturn_t counter0_irq(int irq, void *dev_id, struct pt_regs *regs) if (jiffie_drift >= 999) { jiffie_drift -= 999; - do_timer(regs); /* increment jiffies by one */ + do_timer(1); /* increment jiffies by one */ #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif diff --git a/arch/mips/gt64120/common/time.c b/arch/mips/gt64120/common/time.c index d837b26fbe51..7feca49350d1 100644 --- a/arch/mips/gt64120/common/time.c +++ b/arch/mips/gt64120/common/time.c @@ -34,7 +34,7 @@ static void gt64120_irq(int irq, void *dev_id, struct pt_regs *regs) if (irq_src & 0x00000800) { /* Check for timer interrupt */ handled = 1; irq_src &= ~0x00000800; - do_timer(regs); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index 477c5334ec1b..50c17eaa7f25 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -42,6 +42,8 @@ #include "signal-common.h" +extern void sigset_from_compat(sigset_t *set, compat_sigset_t *compat); + /* * Including <asm/unistd.h> would give use the 64-bit syscall numbers ... */ @@ -81,8 +83,6 @@ struct rt_sigframe_n32 { #endif }; -extern void sigset_from_compat (sigset_t *set, compat_sigset_t *compat); - save_static_function(sysn32_rt_sigsuspend); __attribute_used__ noinline static int _sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 170cb67f4ede..845c7e55505d 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -47,8 +47,6 @@ /* * forward reference */ -extern volatile unsigned long wall_jiffies; - DEFINE_SPINLOCK(rtc_lock); /* @@ -159,7 +157,6 @@ void (*mips_hpt_init)(unsigned int); void do_gettimeofday(struct timeval *tv) { unsigned long seq; - unsigned long lost; unsigned long usec, sec; unsigned long max_ntp_tick; @@ -168,8 +165,6 @@ void do_gettimeofday(struct timeval *tv) usec = do_gettimeoffset(); - lost = jiffies - wall_jiffies; - /* * If time_adjust is negative then NTP is slowing the clock * so make sure not to go into next possible interval. @@ -178,11 +173,7 @@ void do_gettimeofday(struct timeval *tv) if (unlikely(time_adjust < 0)) { max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj; usec = min(usec, max_ntp_tick); - - if (lost) - usec += lost * max_ntp_tick; - } else if (unlikely(lost)) - usec += lost * (USEC_PER_SEC / HZ); + } sec = xtime.tv_sec; usec += (xtime.tv_nsec / 1000); @@ -217,7 +208,6 @@ int do_settimeofday(struct timespec *tv) * made, and then undo it! */ nsec -= do_gettimeoffset() * NSEC_PER_USEC; - nsec -= (jiffies - wall_jiffies) * tick_nsec; wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); @@ -434,7 +424,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) /* * call the generic timer interrupt handling */ - do_timer(regs); + do_timer(1); /* * If we have an externally synchronized Linux clock, then update diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index a4f8c45c4e8e..8423d8590779 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -171,7 +171,7 @@ no_context: */ out_of_memory: up_read(&mm->mmap_sem); - if (tsk->pid == 1) { + if (is_init(tsk)) { yield(); down_read(&mm->mmap_sem); goto survive; diff --git a/arch/mips/momentum/ocelot_g/gt-irq.c b/arch/mips/momentum/ocelot_g/gt-irq.c index 9fb2493fff02..6cd87cf0195a 100644 --- a/arch/mips/momentum/ocelot_g/gt-irq.c +++ b/arch/mips/momentum/ocelot_g/gt-irq.c @@ -133,7 +133,7 @@ static irqreturn_t gt64240_p0int_irq(int irq, void *dev, struct pt_regs *regs) MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0); /* handle the timer call */ - do_timer(regs); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index b029ba79c27a..257ce118e380 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -42,8 +42,6 @@ static unsigned long ct_cur[NR_CPUS]; /* What counter should be at next timer irq */ static long last_rtc_update; /* Last time the rtc clock got updated */ -extern volatile unsigned long wall_jiffies; - #if 0 static int set_rtc_mmss(unsigned long nowtime) { @@ -111,7 +109,7 @@ again: kstat_this_cpu.irqs[irq]++; /* kstat only for bootcpu? */ if (cpu == 0) - do_timer(regs); + do_timer(1); update_process_times(user_mode(regs)); diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c index 4398d2a95789..c2531ae032cf 100644 --- a/arch/parisc/kernel/firmware.c +++ b/arch/parisc/kernel/firmware.c @@ -1049,7 +1049,7 @@ void pdc_iodc_putc(unsigned char c) static int __attribute__((aligned(8))) iodc_retbuf[32]; static char __attribute__((aligned(64))) iodc_dbuf[4096]; unsigned int n; - unsigned int flags; + unsigned long flags; switch (c) { case '\n': @@ -1088,7 +1088,8 @@ void pdc_iodc_putc(unsigned char c) */ void pdc_iodc_outc(unsigned char c) { - unsigned int n, flags; + unsigned int n; + unsigned long flags; /* fill buffer with one caracter and print it */ static int __attribute__((aligned(8))) iodc_retbuf[32]; @@ -1113,7 +1114,7 @@ void pdc_iodc_outc(unsigned char c) */ int pdc_iodc_getc(void) { - unsigned int flags; + unsigned long flags; static int __attribute__((aligned(8))) iodc_retbuf[32]; static char __attribute__((aligned(64))) iodc_dbuf[4096]; int ch; diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c index aee311884f3f..f50b982b0834 100644 --- a/arch/parisc/kernel/module.c +++ b/arch/parisc/kernel/module.c @@ -27,7 +27,7 @@ * - SEGREL32 handling * We are not doing SEGREL32 handling correctly. According to the ABI, we * should do a value offset, like this: - * if (is_init(me, (void *)val)) + * if (in_init(me, (void *)val)) * val -= (uint32_t)me->module_init; * else * val -= (uint32_t)me->module_core; @@ -72,27 +72,27 @@ /* three functions to determine where in the module core * or init pieces the location is */ -static inline int is_init(struct module *me, void *loc) +static inline int in_init(struct module *me, void *loc) { return (loc >= me->module_init && loc <= (me->module_init + me->init_size)); } -static inline int is_core(struct module *me, void *loc) +static inline int in_core(struct module *me, void *loc) { return (loc >= me->module_core && loc <= (me->module_core + me->core_size)); } -static inline int is_local(struct module *me, void *loc) +static inline int in_local(struct module *me, void *loc) { - return is_init(me, loc) || is_core(me, loc); + return in_init(me, loc) || in_core(me, loc); } -static inline int is_local_section(struct module *me, void *loc, void *dot) +static inline int in_local_section(struct module *me, void *loc, void *dot) { - return (is_init(me, loc) && is_init(me, dot)) || - (is_core(me, loc) && is_core(me, dot)); + return (in_init(me, loc) && in_init(me, dot)) || + (in_core(me, loc) && in_core(me, dot)); } @@ -566,14 +566,14 @@ int apply_relocate_add(Elf_Shdr *sechdrs, break; case R_PARISC_PCREL17F: /* 17-bit PC relative address */ - val = get_stub(me, val, addend, ELF_STUB_GOT, is_init(me, loc)); + val = get_stub(me, val, addend, ELF_STUB_GOT, in_init(me, loc)); val = (val - dot - 8)/4; CHECK_RELOC(val, 17) *loc = (*loc & ~0x1f1ffd) | reassemble_17(val); break; case R_PARISC_PCREL22F: /* 22-bit PC relative address; only defined for pa20 */ - val = get_stub(me, val, addend, ELF_STUB_GOT, is_init(me, loc)); + val = get_stub(me, val, addend, ELF_STUB_GOT, in_init(me, loc)); DEBUGP("STUB FOR %s loc %lx+%lx at %lx\n", strtab + sym->st_name, (unsigned long)loc, addend, val) @@ -670,9 +670,9 @@ int apply_relocate_add(Elf_Shdr *sechdrs, strtab + sym->st_name, loc, val); /* can we reach it locally? */ - if(!is_local_section(me, (void *)val, (void *)dot)) { + if(!in_local_section(me, (void *)val, (void *)dot)) { - if (is_local(me, (void *)val)) + if (in_local(me, (void *)val)) /* this is the case where the * symbol is local to the * module, but in a different @@ -680,14 +680,14 @@ int apply_relocate_add(Elf_Shdr *sechdrs, * in case it's more than 22 * bits away */ val = get_stub(me, val, addend, ELF_STUB_DIRECT, - is_init(me, loc)); + in_init(me, loc)); else if (strncmp(strtab + sym->st_name, "$$", 2) == 0) val = get_stub(me, val, addend, ELF_STUB_MILLI, - is_init(me, loc)); + in_init(me, loc)); else val = get_stub(me, val, addend, ELF_STUB_GOT, - is_init(me, loc)); + in_init(me, loc)); } DEBUGP("STUB FOR %s loc %lx, val %lx+%lx at %lx\n", strtab + sym->st_name, loc, sym->st_value, @@ -720,7 +720,7 @@ int apply_relocate_add(Elf_Shdr *sechdrs, break; case R_PARISC_FPTR64: /* 64-bit function address */ - if(is_local(me, (void *)(val + addend))) { + if(in_local(me, (void *)(val + addend))) { *loc64 = get_fdesc(me, val+addend); DEBUGP("FDESC for %s at %p points to %lx\n", strtab + sym->st_name, *loc64, diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index 5facc9bff4ef..ab641d67f551 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -32,9 +32,6 @@ #include <linux/timex.h> -/* xtime and wall_jiffies keep wall-clock time */ -extern unsigned long wall_jiffies; - static long clocktick __read_mostly; /* timer cycles per tick */ static long halftick __read_mostly; @@ -79,7 +76,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) #endif if (cpu == 0) { write_seqlock(&xtime_lock); - do_timer(regs); + do_timer(1); write_sequnlock(&xtime_lock); } } @@ -112,7 +109,7 @@ EXPORT_SYMBOL(profile_pc); /*** converted from ia64 ***/ /* * Return the number of micro-seconds that elapsed since the last - * update to wall time (aka xtime aka wall_jiffies). The xtime_lock + * update to wall time (aka xtime). The xtime_lock * must be at least read-locked when calling this routine. */ static inline unsigned long diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index e0df2ba1ab9f..79a17795d17b 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -67,10 +67,6 @@ int have_of = 1; dev_t boot_dev; #endif /* CONFIG_PPC_MULTIPLATFORM */ -#ifdef CONFIG_MAGIC_SYSRQ -unsigned long SYSRQ_KEY = 0x54; -#endif /* CONFIG_MAGIC_SYSRQ */ - #ifdef CONFIG_VGA_CONSOLE unsigned long vgacon_remap_base; #endif diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 00d6b8addd78..962ad5ebc767 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -93,11 +93,6 @@ int dcache_bsize; int icache_bsize; int ucache_bsize; -#ifdef CONFIG_MAGIC_SYSRQ -unsigned long SYSRQ_KEY; -#endif /* CONFIG_MAGIC_SYSRQ */ - - #ifdef CONFIG_SMP static int smt_enabled_cmdline; diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 7a3c3f791ade..8b278d85ca4e 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -117,8 +117,6 @@ unsigned tb_to_ns_shift; struct gettimeofday_struct do_gtod; -extern unsigned long wall_jiffies; - extern struct timezone sys_tz; static long timezone_offset; @@ -693,7 +691,7 @@ void timer_interrupt(struct pt_regs * regs) tb_next_jiffy = tb_last_jiffy + tb_ticks_per_jiffy; if (per_cpu(last_jiffy, cpu) >= tb_next_jiffy) { tb_last_jiffy = tb_next_jiffy; - do_timer(regs); + do_timer(1); timer_recalc_offset(tb_last_jiffy); timer_check_rtc(); } @@ -816,11 +814,6 @@ int do_settimeofday(struct timespec *tv) /* * Subtract off the number of nanoseconds since the * beginning of the last tick. - * Note that since we don't increment jiffies_64 anywhere other - * than in do_timer (since we don't have a lost tick problem), - * wall_jiffies will always be the same as jiffies, - * and therefore the (jiffies - wall_jiffies) computation - * has been removed. */ tb_delta = tb_ticks_since(tb_last_jiffy); tb_delta = mulhdu(tb_delta, do_gtod.varp->tb_to_xs); /* in xsec */ diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 78a0d59903ee..e8fa50624b70 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -333,7 +333,7 @@ good_area: /* protection fault */ if (error_code & 0x08000000) goto bad_area; - if (!(vma->vm_flags & (VM_READ | VM_EXEC))) + if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) goto bad_area; } @@ -386,7 +386,7 @@ bad_area_nosemaphore: */ out_of_memory: up_read(&mm->mmap_sem); - if (current->pid == 1) { + if (is_init(current)) { yield(); down_read(&mm->mmap_sem); goto survive; diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c index d30466d74194..9d22361a26d6 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -104,7 +104,7 @@ static void g5_smu_switch_volt(int speed_mode) { struct smu_simple_cmd cmd; - DECLARE_COMPLETION(comp); + DECLARE_COMPLETION_ONSTACK(comp); smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete, &comp, 'V', 'S', 'L', 'E', 'W', 0xff, g5_fvt_cur+1, speed_mode); diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c index 6a36ea9bf673..692945c14919 100644 --- a/arch/powerpc/platforms/powermac/nvram.c +++ b/arch/powerpc/platforms/powermac/nvram.c @@ -195,7 +195,7 @@ static void pmu_nvram_complete(struct adb_request *req) static unsigned char pmu_nvram_read_byte(int addr) { struct adb_request req; - DECLARE_COMPLETION(req_complete); + DECLARE_COMPLETION_ONSTACK(req_complete); req.arg = system_state == SYSTEM_RUNNING ? &req_complete : NULL; if (pmu_request(&req, pmu_nvram_complete, 3, PMU_READ_NVRAM, @@ -211,7 +211,7 @@ static unsigned char pmu_nvram_read_byte(int addr) static void pmu_nvram_write_byte(int addr, unsigned char val) { struct adb_request req; - DECLARE_COMPLETION(req_complete); + DECLARE_COMPLETION_ONSTACK(req_complete); req.arg = system_state == SYSTEM_RUNNING ? &req_complete : NULL; if (pmu_request(&req, pmu_nvram_complete, 4, PMU_WRITE_NVRAM, diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index 903115d67fdc..311ed1993fc0 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -337,7 +337,7 @@ static int recover_mce(struct pt_regs *regs, struct rtas_error_log * err) err->disposition == RTAS_DISP_NOT_RECOVERED && err->target == RTAS_TARGET_MEMORY && err->type == RTAS_TYPE_ECC_UNCORR && - !(current->pid == 0 || current->pid == 1)) { + !(current->pid == 0 || is_init(current))) { /* Kill off a user process with an ECC error */ printk(KERN_ERR "MCE: uncorrectable ecc error for pid %d\n", current->pid); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index a6398fbe530d..8ed362140452 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -415,6 +415,12 @@ static int pSeries_check_legacy_ioport(unsigned int baseport) return -ENODEV; of_node_put(np); break; + case PARALLEL_BASE: + np = of_find_node_by_type(NULL, "parallel"); + if (np == NULL) + return -ENODEV; + of_node_put(np); + break; } return 0; } diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 5458ac5da7c3..75fe13815be2 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -86,10 +86,6 @@ int ppc_do_canonicalize_irqs; EXPORT_SYMBOL(ppc_do_canonicalize_irqs); #endif -#ifdef CONFIG_MAGIC_SYSRQ -unsigned long SYSRQ_KEY = 0x54; -#endif /* CONFIG_MAGIC_SYSRQ */ - #ifdef CONFIG_VGA_CONSOLE unsigned long vgacon_remap_base; #endif diff --git a/arch/ppc/kernel/time.c b/arch/ppc/kernel/time.c index 6ab8cc7226ab..187388625a76 100644 --- a/arch/ppc/kernel/time.c +++ b/arch/ppc/kernel/time.c @@ -80,8 +80,6 @@ unsigned tb_to_us; unsigned tb_last_stamp; unsigned long tb_to_ns_scale; -extern unsigned long wall_jiffies; - /* used for timezone offset */ static long timezone_offset; @@ -153,7 +151,7 @@ void timer_interrupt(struct pt_regs * regs) /* We are in an interrupt, no need to save/restore flags */ write_seqlock(&xtime_lock); tb_last_stamp = jiffy_stamp; - do_timer(regs); + do_timer(1); /* * update the rtc when needed, this should be performed on the @@ -173,8 +171,7 @@ void timer_interrupt(struct pt_regs * regs) */ if ( ppc_md.set_rtc_time && ntp_synced() && xtime.tv_sec - last_rtc_update >= 659 && - abs((xtime.tv_nsec / 1000) - (1000000-1000000/HZ)) < 500000/HZ && - jiffies - wall_jiffies == 1) { + abs((xtime.tv_nsec / 1000) - (1000000-1000000/HZ)) < 500000/HZ) { if (ppc_md.set_rtc_time(xtime.tv_sec+1 + timezone_offset) == 0) last_rtc_update = xtime.tv_sec+1; else @@ -200,7 +197,7 @@ void do_gettimeofday(struct timeval *tv) { unsigned long flags; unsigned long seq; - unsigned delta, lost_ticks, usec, sec; + unsigned delta, usec, sec; do { seq = read_seqbegin_irqsave(&xtime_lock, flags); @@ -214,10 +211,9 @@ void do_gettimeofday(struct timeval *tv) if (!smp_tb_synchronized) delta = 0; #endif /* CONFIG_SMP */ - lost_ticks = jiffies - wall_jiffies; } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - usec += mulhwu(tb_to_us, tb_ticks_per_jiffy * lost_ticks + delta); + usec += mulhwu(tb_to_us, delta); while (usec >= 1000000) { sec++; usec -= 1000000; @@ -258,7 +254,6 @@ int do_settimeofday(struct timespec *tv) * still reasonable when gettimeofday resolution is 1 jiffy. */ tb_delta = tb_ticks_since(last_jiffy_stamp(smp_processor_id())); - tb_delta += (jiffies - wall_jiffies) * tb_ticks_per_jiffy; new_nsec -= 1000 * mulhwu(tb_to_us, tb_delta); diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index d7a433049b48..aafc8e8893d1 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -119,7 +119,7 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) * generate the same exception over and over again and we get * nowhere. Better to kill it and let the kernel panic. */ - if (current->pid == 1) { + if (is_init(current)) { __sighandler_t handler; spin_lock_irq(¤t->sighand->siglock); diff --git a/arch/ppc/mm/fault.c b/arch/ppc/mm/fault.c index 5cdfb71fcb07..465f451f3bc3 100644 --- a/arch/ppc/mm/fault.c +++ b/arch/ppc/mm/fault.c @@ -239,7 +239,7 @@ good_area: /* protection fault */ if (error_code & 0x08000000) goto bad_area; - if (!(vma->vm_flags & (VM_READ | VM_EXEC))) + if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) goto bad_area; } @@ -291,7 +291,7 @@ bad_area: */ out_of_memory: up_read(&mm->mmap_sem); - if (current->pid == 1) { + if (is_init(current)) { yield(); down_read(&mm->mmap_sem); goto survive; diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index b216ca659cdf..f900a516f099 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -51,6 +51,10 @@ config 64BIT Select this option if you have a 64 bit IBM zSeries machine and want to use the 64 bit addressing mode. +config 32BIT + bool + default y if !64BIT + config SMP bool "Symmetric multi-processing support" ---help--- @@ -149,6 +153,14 @@ config MARCH_Z990 This will be slightly faster but does not work on older machines such as the z900. +config MARCH_Z9_109 + bool "IBM System z9" + help + Select this to enable optimizations for IBM System z9-109, IBM + System z9 Enterprise Class (z9 EC), and IBM System z9 Business + Class (z9 BC). The kernel will be slightly faster but will not + work on older machines such as the z990, z890, z900, and z800. + endchoice config PACK_STACK diff --git a/arch/s390/Makefile b/arch/s390/Makefile index 74ef57dcfa60..5deb9f7544a1 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -33,6 +33,7 @@ endif cflags-$(CONFIG_MARCH_G5) += $(call cc-option,-march=g5) cflags-$(CONFIG_MARCH_Z900) += $(call cc-option,-march=z900) cflags-$(CONFIG_MARCH_Z990) += $(call cc-option,-march=z990) +cflags-$(CONFIG_MARCH_Z9_109) += $(call cc-option,-march=z9-109) # # Prevent tail-call optimizations, to get clearer backtraces: diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index b69ed742f981..2b1e6c9a6e0e 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -16,7 +16,7 @@ #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/proc_fs.h> -#include <linux/page-flags.h> +#include <linux/mm.h> #include <linux/swap.h> #include <linux/pagemap.h> #include <linux/sysctl.h> @@ -157,12 +157,12 @@ int appldata_diag(char record_nr, u16 function, unsigned long buffer, .prod_nr = {0xD3, 0xC9, 0xD5, 0xE4, 0xE7, 0xD2, 0xD9}, /* "LINUXKR" */ .prod_fn = 0xD5D3, /* "NL" */ - .record_nr = record_nr, .version_nr = 0xF2F6, /* "26" */ .release_nr = 0xF0F1, /* "01" */ - .mod_lvl = (mod_lvl[0]) << 8 | mod_lvl[1], }; + id.record_nr = record_nr; + id.mod_lvl = (mod_lvl[0]) << 8 | mod_lvl[1]; return appldata_asm(&id, function, (void *) buffer, length); } /************************ timer, work, DIAG <END> ****************************/ diff --git a/arch/s390/crypto/crypt_s390.h b/arch/s390/crypto/crypt_s390.h index efd836c2e4a6..2b137089f625 100644 --- a/arch/s390/crypto/crypt_s390.h +++ b/arch/s390/crypto/crypt_s390.h @@ -105,63 +105,6 @@ struct crypt_s390_query_status { }; /* - * Standard fixup and ex_table sections for crypt_s390 inline functions. - * label 0: the s390 crypto operation - * label 1: just after 1 to catch illegal operation exception - * (unsupported model) - * label 6: the return point after fixup - * label 7: set error value if exception _in_ crypto operation - * label 8: set error value if illegal operation exception - * [ret] is the variable to receive the error code - * [ERR] is the error code value - */ -#ifndef CONFIG_64BIT -#define __crypt_s390_fixup \ - ".section .fixup,\"ax\" \n" \ - "7: lhi %0,%h[e1] \n" \ - " bras 1,9f \n" \ - " .long 6b \n" \ - "8: lhi %0,%h[e2] \n" \ - " bras 1,9f \n" \ - " .long 6b \n" \ - "9: l 1,0(1) \n" \ - " br 1 \n" \ - ".previous \n" \ - ".section __ex_table,\"a\" \n" \ - " .align 4 \n" \ - " .long 0b,7b \n" \ - " .long 1b,8b \n" \ - ".previous" -#else /* CONFIG_64BIT */ -#define __crypt_s390_fixup \ - ".section .fixup,\"ax\" \n" \ - "7: lhi %0,%h[e1] \n" \ - " jg 6b \n" \ - "8: lhi %0,%h[e2] \n" \ - " jg 6b \n" \ - ".previous\n" \ - ".section __ex_table,\"a\" \n" \ - " .align 8 \n" \ - " .quad 0b,7b \n" \ - " .quad 1b,8b \n" \ - ".previous" -#endif /* CONFIG_64BIT */ - -/* - * Standard code for setting the result of s390 crypto instructions. - * %0: the register which will receive the result - * [result]: the register containing the result (e.g. second operand length - * to compute number of processed bytes]. - */ -#ifndef CONFIG_64BIT -#define __crypt_s390_set_result \ - " lr %0,%[result] \n" -#else /* CONFIG_64BIT */ -#define __crypt_s390_set_result \ - " lgr %0,%[result] \n" -#endif - -/* * Executes the KM (CIPHER MESSAGE) operation of the CPU. * @param func: the function code passed to KM; see crypt_s390_km_func * @param param: address of parameter block; see POP for details on each func @@ -176,28 +119,24 @@ crypt_s390_km(long func, void* param, u8* dest, const u8* src, long src_len) { register long __func asm("0") = func & CRYPT_S390_FUNC_MASK; register void* __param asm("1") = param; - register u8* __dest asm("4") = dest; register const u8* __src asm("2") = src; register long __src_len asm("3") = src_len; + register u8* __dest asm("4") = dest; int ret; - ret = 0; - __asm__ __volatile__ ( - "0: .insn rre,0xB92E0000,%1,%2 \n" /* KM opcode */ + asm volatile( + "0: .insn rre,0xb92e0000,%3,%1 \n" /* KM opcode */ "1: brc 1,0b \n" /* handle partial completion */ - __crypt_s390_set_result - "6: \n" - __crypt_s390_fixup - : "+d" (ret), "+a" (__dest), "+a" (__src), - [result] "+d" (__src_len) - : [e1] "K" (-EFAULT), [e2] "K" (-ENOSYS), "d" (__func), - "a" (__param) - : "cc", "memory" - ); - if (ret >= 0 && func & CRYPT_S390_FUNC_MASK){ - ret = src_len - ret; - } - return ret; + " ahi %0,%h7\n" + "2: ahi %0,%h8\n" + "3:\n" + EX_TABLE(0b,3b) EX_TABLE(1b,2b) + : "=d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest) + : "d" (__func), "a" (__param), "0" (-EFAULT), + "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory"); + if (ret < 0) + return ret; + return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len; } /* @@ -215,28 +154,24 @@ crypt_s390_kmc(long func, void* param, u8* dest, const u8* src, long src_len) { register long __func asm("0") = func & CRYPT_S390_FUNC_MASK; register void* __param asm("1") = param; - register u8* __dest asm("4") = dest; register const u8* __src asm("2") = src; register long __src_len asm("3") = src_len; + register u8* __dest asm("4") = dest; int ret; - ret = 0; - __asm__ __volatile__ ( - "0: .insn rre,0xB92F0000,%1,%2 \n" /* KMC opcode */ + asm volatile( + "0: .insn rre,0xb92f0000,%3,%1 \n" /* KMC opcode */ "1: brc 1,0b \n" /* handle partial completion */ - __crypt_s390_set_result - "6: \n" - __crypt_s390_fixup - : "+d" (ret), "+a" (__dest), "+a" (__src), - [result] "+d" (__src_len) - : [e1] "K" (-EFAULT), [e2] "K" (-ENOSYS), "d" (__func), - "a" (__param) - : "cc", "memory" - ); - if (ret >= 0 && func & CRYPT_S390_FUNC_MASK){ - ret = src_len - ret; - } - return ret; + " ahi %0,%h7\n" + "2: ahi %0,%h8\n" + "3:\n" + EX_TABLE(0b,3b) EX_TABLE(1b,2b) + : "=d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest) + : "d" (__func), "a" (__param), "0" (-EFAULT), + "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory"); + if (ret < 0) + return ret; + return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len; } /* @@ -258,22 +193,19 @@ crypt_s390_kimd(long func, void* param, const u8* src, long src_len) register long __src_len asm("3") = src_len; int ret; - ret = 0; - __asm__ __volatile__ ( - "0: .insn rre,0xB93E0000,%1,%1 \n" /* KIMD opcode */ - "1: brc 1,0b \n" /* handle partical completion */ - __crypt_s390_set_result - "6: \n" - __crypt_s390_fixup - : "+d" (ret), "+a" (__src), [result] "+d" (__src_len) - : [e1] "K" (-EFAULT), [e2] "K" (-ENOSYS), "d" (__func), - "a" (__param) - : "cc", "memory" - ); - if (ret >= 0 && (func & CRYPT_S390_FUNC_MASK)){ - ret = src_len - ret; - } - return ret; + asm volatile( + "0: .insn rre,0xb93e0000,%1,%1 \n" /* KIMD opcode */ + "1: brc 1,0b \n" /* handle partial completion */ + " ahi %0,%h6\n" + "2: ahi %0,%h7\n" + "3:\n" + EX_TABLE(0b,3b) EX_TABLE(1b,2b) + : "=d" (ret), "+a" (__src), "+d" (__src_len) + : "d" (__func), "a" (__param), "0" (-EFAULT), + "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory"); + if (ret < 0) + return ret; + return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len; } /* @@ -294,22 +226,19 @@ crypt_s390_klmd(long func, void* param, const u8* src, long src_len) register long __src_len asm("3") = src_len; int ret; - ret = 0; - __asm__ __volatile__ ( - "0: .insn rre,0xB93F0000,%1,%1 \n" /* KLMD opcode */ - "1: brc 1,0b \n" /* handle partical completion */ - __crypt_s390_set_result - "6: \n" - __crypt_s390_fixup - : "+d" (ret), "+a" (__src), [result] "+d" (__src_len) - : [e1] "K" (-EFAULT), [e2] "K" (-ENOSYS), "d" (__func), - "a" (__param) - : "cc", "memory" - ); - if (ret >= 0 && func & CRYPT_S390_FUNC_MASK){ - ret = src_len - ret; - } - return ret; + asm volatile( + "0: .insn rre,0xb93f0000,%1,%1 \n" /* KLMD opcode */ + "1: brc 1,0b \n" /* handle partial completion */ + " ahi %0,%h6\n" + "2: ahi %0,%h7\n" + "3:\n" + EX_TABLE(0b,3b) EX_TABLE(1b,2b) + : "=d" (ret), "+a" (__src), "+d" (__src_len) + : "d" (__func), "a" (__param), "0" (-EFAULT), + "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory"); + if (ret < 0) + return ret; + return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len; } /* @@ -331,22 +260,19 @@ crypt_s390_kmac(long func, void* param, const u8* src, long src_len) register long __src_len asm("3") = src_len; int ret; - ret = 0; - __asm__ __volatile__ ( - "0: .insn rre,0xB91E0000,%5,%5 \n" /* KMAC opcode */ - "1: brc 1,0b \n" /* handle partical completion */ - __crypt_s390_set_result - "6: \n" - __crypt_s390_fixup - : "+d" (ret), "+a" (__src), [result] "+d" (__src_len) - : [e1] "K" (-EFAULT), [e2] "K" (-ENOSYS), "d" (__func), - "a" (__param) - : "cc", "memory" - ); - if (ret >= 0 && func & CRYPT_S390_FUNC_MASK){ - ret = src_len - ret; - } - return ret; + asm volatile( + "0: .insn rre,0xb91e0000,%1,%1 \n" /* KLAC opcode */ + "1: brc 1,0b \n" /* handle partial completion */ + " ahi %0,%h6\n" + "2: ahi %0,%h7\n" + "3:\n" + EX_TABLE(0b,3b) EX_TABLE(1b,2b) + : "=d" (ret), "+a" (__src), "+d" (__src_len) + : "d" (__func), "a" (__param), "0" (-EFAULT), + "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory"); + if (ret < 0) + return ret; + return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len; } /** diff --git a/arch/s390/hypfs/hypfs_diag.c b/arch/s390/hypfs/hypfs_diag.c index 75144efbb92b..443fa377d9ff 100644 --- a/arch/s390/hypfs/hypfs_diag.c +++ b/arch/s390/hypfs/hypfs_diag.c @@ -333,22 +333,14 @@ static int diag204(unsigned long subcode, unsigned long size, void *addr) register unsigned long _subcode asm("0") = subcode; register unsigned long _size asm("1") = size; - asm volatile (" diag %2,%0,0x204\n" - "0: \n" ".section __ex_table,\"a\"\n" -#ifndef __s390x__ - " .align 4\n" - " .long 0b,0b\n" -#else - " .align 8\n" - " .quad 0b,0b\n" -#endif - ".previous":"+d" (_subcode), "+d"(_size) - :"d"(addr) - :"memory"); + asm volatile( + " diag %2,%0,0x204\n" + "0:\n" + EX_TABLE(0b,0b) + : "+d" (_subcode), "+d" (_size) : "d" (addr) : "memory"); if (_subcode) return -1; - else - return _size; + return _size; } /* @@ -403,7 +395,8 @@ static void *diag204_get_buffer(enum diag204_format fmt, int *pages) *pages = 1; return diag204_alloc_rbuf(); } else {/* INFO_EXT */ - *pages = diag204(SUBC_RSI | INFO_EXT, 0, NULL); + *pages = diag204((unsigned long)SUBC_RSI | + (unsigned long)INFO_EXT, 0, NULL); if (*pages <= 0) return ERR_PTR(-ENOSYS); else @@ -490,8 +483,7 @@ out: static void diag224(void *ptr) { - asm volatile(" diag %0,%1,0x224\n" - : :"d" (0), "d"(ptr) : "memory"); + asm volatile("diag %0,%1,0x224" : :"d" (0), "d"(ptr) : "memory"); } static int diag224_get_name_table(void) diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c index 813fc21358f9..cd702ae45d6d 100644 --- a/arch/s390/hypfs/inode.c +++ b/arch/s390/hypfs/inode.c @@ -134,12 +134,20 @@ static int hypfs_open(struct inode *inode, struct file *filp) return 0; } -static ssize_t hypfs_aio_read(struct kiocb *iocb, __user char *buf, - size_t count, loff_t offset) +static ssize_t hypfs_aio_read(struct kiocb *iocb, const struct iovec *iov, + unsigned long nr_segs, loff_t offset) { char *data; size_t len; struct file *filp = iocb->ki_filp; + /* XXX: temporary */ + char __user *buf = iov[0].iov_base; + size_t count = iov[0].iov_len; + + if (nr_segs != 1) { + count = -EINVAL; + goto out; + } data = filp->private_data; len = strlen(data); @@ -158,12 +166,13 @@ static ssize_t hypfs_aio_read(struct kiocb *iocb, __user char *buf, out: return count; } -static ssize_t hypfs_aio_write(struct kiocb *iocb, const char __user *buf, - size_t count, loff_t pos) +static ssize_t hypfs_aio_write(struct kiocb *iocb, const struct iovec *iov, + unsigned long nr_segs, loff_t offset) { int rc; struct super_block *sb; struct hypfs_sb_info *fs_info; + size_t count = iov_length(iov, nr_segs); sb = iocb->ki_filp->f_dentry->d_inode->i_sb; fs_info = sb->s_fs_info; diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index 91b2884fa5c4..c46e3d48e410 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -544,10 +544,7 @@ sys32_execve(struct pt_regs regs) current->ptrace &= ~PT_DTRACE; task_unlock(current); current->thread.fp_regs.fpc=0; - __asm__ __volatile__ - ("sr 0,0\n\t" - "sfpc 0,0\n\t" - : : :"0"); + asm volatile("sfpc %0,0" : : "d" (0)); } putname(filename); out: diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 4d53b2739357..4aabeeaa7cf7 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -4,97 +4,97 @@ * * Copyright (C) IBM Corp. 2000,2006 * Author(s): Gerhard Tonn (ton@de.ibm.com), -* Thomas Spatzier (tspat@de.ibm.com) -*/ +* Thomas Spatzier (tspat@de.ibm.com) +*/ - .globl sys32_exit_wrapper + .globl sys32_exit_wrapper sys32_exit_wrapper: lgfr %r2,%r2 # int jg sys_exit # branch to sys_exit - - .globl sys32_read_wrapper + + .globl sys32_read_wrapper sys32_read_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # char * llgfr %r4,%r4 # size_t jg sys32_read # branch to sys_read - .globl sys32_write_wrapper + .globl sys32_write_wrapper sys32_write_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # const char * llgfr %r4,%r4 # size_t jg sys32_write # branch to system call - .globl sys32_open_wrapper + .globl sys32_open_wrapper sys32_open_wrapper: llgtr %r2,%r2 # const char * lgfr %r3,%r3 # int lgfr %r4,%r4 # int jg sys_open # branch to system call - .globl sys32_close_wrapper + .globl sys32_close_wrapper sys32_close_wrapper: llgfr %r2,%r2 # unsigned int jg sys_close # branch to system call - .globl sys32_creat_wrapper + .globl sys32_creat_wrapper sys32_creat_wrapper: llgtr %r2,%r2 # const char * lgfr %r3,%r3 # int jg sys_creat # branch to system call - .globl sys32_link_wrapper + .globl sys32_link_wrapper sys32_link_wrapper: llgtr %r2,%r2 # const char * llgtr %r3,%r3 # const char * jg sys_link # branch to system call - .globl sys32_unlink_wrapper + .globl sys32_unlink_wrapper sys32_unlink_wrapper: llgtr %r2,%r2 # const char * jg sys_unlink # branch to system call - .globl sys32_chdir_wrapper + .globl sys32_chdir_wrapper sys32_chdir_wrapper: llgtr %r2,%r2 # const char * jg sys_chdir # branch to system call - .globl sys32_time_wrapper + .globl sys32_time_wrapper sys32_time_wrapper: llgtr %r2,%r2 # int * jg compat_sys_time # branch to system call - .globl sys32_mknod_wrapper + .globl sys32_mknod_wrapper sys32_mknod_wrapper: llgtr %r2,%r2 # const char * - lgfr %r3,%r3 # int + lgfr %r3,%r3 # int llgfr %r4,%r4 # dev jg sys_mknod # branch to system call - .globl sys32_chmod_wrapper + .globl sys32_chmod_wrapper sys32_chmod_wrapper: llgtr %r2,%r2 # const char * llgfr %r3,%r3 # mode_t jg sys_chmod # branch to system call - .globl sys32_lchown16_wrapper + .globl sys32_lchown16_wrapper sys32_lchown16_wrapper: llgtr %r2,%r2 # const char * - llgfr %r3,%r3 # __kernel_old_uid_emu31_t - llgfr %r4,%r4 # __kernel_old_uid_emu31_t + llgfr %r3,%r3 # __kernel_old_uid_emu31_t + llgfr %r4,%r4 # __kernel_old_uid_emu31_t jg sys32_lchown16 # branch to system call - .globl sys32_lseek_wrapper + .globl sys32_lseek_wrapper sys32_lseek_wrapper: llgfr %r2,%r2 # unsigned int lgfr %r3,%r3 # off_t llgfr %r4,%r4 # unsigned int jg sys_lseek # branch to system call -#sys32_getpid_wrapper # void +#sys32_getpid_wrapper # void - .globl sys32_mount_wrapper + .globl sys32_mount_wrapper sys32_mount_wrapper: llgtr %r2,%r2 # char * llgtr %r3,%r3 # char * @@ -103,19 +103,19 @@ sys32_mount_wrapper: llgtr %r6,%r6 # void * jg compat_sys_mount # branch to system call - .globl sys32_oldumount_wrapper + .globl sys32_oldumount_wrapper sys32_oldumount_wrapper: llgtr %r2,%r2 # char * jg sys_oldumount # branch to system call - .globl sys32_setuid16_wrapper + .globl sys32_setuid16_wrapper sys32_setuid16_wrapper: - llgfr %r2,%r2 # __kernel_old_uid_emu31_t + llgfr %r2,%r2 # __kernel_old_uid_emu31_t jg sys32_setuid16 # branch to system call -#sys32_getuid16_wrapper # void +#sys32_getuid16_wrapper # void - .globl sys32_ptrace_wrapper + .globl sys32_ptrace_wrapper sys32_ptrace_wrapper: lgfr %r2,%r2 # long lgfr %r3,%r3 # long @@ -123,168 +123,168 @@ sys32_ptrace_wrapper: llgfr %r5,%r5 # long jg sys_ptrace # branch to system call - .globl sys32_alarm_wrapper + .globl sys32_alarm_wrapper sys32_alarm_wrapper: llgfr %r2,%r2 # unsigned int jg sys_alarm # branch to system call -#sys32_pause_wrapper # void +#sys32_pause_wrapper # void - .globl compat_sys_utime_wrapper + .globl compat_sys_utime_wrapper compat_sys_utime_wrapper: llgtr %r2,%r2 # char * llgtr %r3,%r3 # struct compat_utimbuf * jg compat_sys_utime # branch to system call - .globl sys32_access_wrapper + .globl sys32_access_wrapper sys32_access_wrapper: llgtr %r2,%r2 # const char * lgfr %r3,%r3 # int jg sys_access # branch to system call - .globl sys32_nice_wrapper + .globl sys32_nice_wrapper sys32_nice_wrapper: lgfr %r2,%r2 # int jg sys_nice # branch to system call -#sys32_sync_wrapper # void +#sys32_sync_wrapper # void - .globl sys32_kill_wrapper + .globl sys32_kill_wrapper sys32_kill_wrapper: lgfr %r2,%r2 # int lgfr %r3,%r3 # int jg sys_kill # branch to system call - .globl sys32_rename_wrapper + .globl sys32_rename_wrapper sys32_rename_wrapper: llgtr %r2,%r2 # const char * llgtr %r3,%r3 # const char * jg sys_rename # branch to system call - .globl sys32_mkdir_wrapper + .globl sys32_mkdir_wrapper sys32_mkdir_wrapper: llgtr %r2,%r2 # const char * lgfr %r3,%r3 # int jg sys_mkdir # branch to system call - .globl sys32_rmdir_wrapper + .globl sys32_rmdir_wrapper sys32_rmdir_wrapper: llgtr %r2,%r2 # const char * jg sys_rmdir # branch to system call - .globl sys32_dup_wrapper + .globl sys32_dup_wrapper sys32_dup_wrapper: llgfr %r2,%r2 # unsigned int jg sys_dup # branch to system call - .globl sys32_pipe_wrapper + .globl sys32_pipe_wrapper sys32_pipe_wrapper: llgtr %r2,%r2 # u32 * jg sys_pipe # branch to system call - .globl compat_sys_times_wrapper + .globl compat_sys_times_wrapper compat_sys_times_wrapper: llgtr %r2,%r2 # struct compat_tms * jg compat_sys_times # branch to system call - .globl sys32_brk_wrapper + .globl sys32_brk_wrapper sys32_brk_wrapper: llgtr %r2,%r2 # unsigned long jg sys_brk # branch to system call - .globl sys32_setgid16_wrapper + .globl sys32_setgid16_wrapper sys32_setgid16_wrapper: - llgfr %r2,%r2 # __kernel_old_gid_emu31_t + llgfr %r2,%r2 # __kernel_old_gid_emu31_t jg sys32_setgid16 # branch to system call -#sys32_getgid16_wrapper # void +#sys32_getgid16_wrapper # void .globl sys32_signal_wrapper sys32_signal_wrapper: - lgfr %r2,%r2 # int + lgfr %r2,%r2 # int llgtr %r3,%r3 # __sighandler_t jg sys_signal -#sys32_geteuid16_wrapper # void +#sys32_geteuid16_wrapper # void -#sys32_getegid16_wrapper # void +#sys32_getegid16_wrapper # void - .globl sys32_acct_wrapper + .globl sys32_acct_wrapper sys32_acct_wrapper: llgtr %r2,%r2 # char * jg sys_acct # branch to system call - .globl sys32_umount_wrapper + .globl sys32_umount_wrapper sys32_umount_wrapper: llgtr %r2,%r2 # char * lgfr %r3,%r3 # int jg sys_umount # branch to system call - .globl compat_sys_ioctl_wrapper + .globl compat_sys_ioctl_wrapper compat_sys_ioctl_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # unsigned int llgfr %r4,%r4 # unsigned int jg compat_sys_ioctl # branch to system call - .globl compat_sys_fcntl_wrapper + .globl compat_sys_fcntl_wrapper compat_sys_fcntl_wrapper: llgfr %r2,%r2 # unsigned int - llgfr %r3,%r3 # unsigned int + llgfr %r3,%r3 # unsigned int llgfr %r4,%r4 # unsigned long jg compat_sys_fcntl # branch to system call - .globl sys32_setpgid_wrapper + .globl sys32_setpgid_wrapper sys32_setpgid_wrapper: lgfr %r2,%r2 # pid_t lgfr %r3,%r3 # pid_t jg sys_setpgid # branch to system call - .globl sys32_umask_wrapper + .globl sys32_umask_wrapper sys32_umask_wrapper: lgfr %r2,%r2 # int jg sys_umask # branch to system call - .globl sys32_chroot_wrapper + .globl sys32_chroot_wrapper sys32_chroot_wrapper: llgtr %r2,%r2 # char * jg sys_chroot # branch to system call .globl sys32_ustat_wrapper sys32_ustat_wrapper: - llgfr %r2,%r2 # dev_t + llgfr %r2,%r2 # dev_t llgtr %r3,%r3 # struct ustat * jg sys_ustat - .globl sys32_dup2_wrapper + .globl sys32_dup2_wrapper sys32_dup2_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # unsigned int jg sys_dup2 # branch to system call -#sys32_getppid_wrapper # void +#sys32_getppid_wrapper # void -#sys32_getpgrp_wrapper # void +#sys32_getpgrp_wrapper # void -#sys32_setsid_wrapper # void +#sys32_setsid_wrapper # void - .globl sys32_sigaction_wrapper + .globl sys32_sigaction_wrapper sys32_sigaction_wrapper: - lgfr %r2,%r2 # int + lgfr %r2,%r2 # int llgtr %r3,%r3 # const struct old_sigaction * llgtr %r4,%r4 # struct old_sigaction32 * jg sys32_sigaction # branch to system call - .globl sys32_setreuid16_wrapper + .globl sys32_setreuid16_wrapper sys32_setreuid16_wrapper: - llgfr %r2,%r2 # __kernel_old_uid_emu31_t - llgfr %r3,%r3 # __kernel_old_uid_emu31_t + llgfr %r2,%r2 # __kernel_old_uid_emu31_t + llgfr %r3,%r3 # __kernel_old_uid_emu31_t jg sys32_setreuid16 # branch to system call - .globl sys32_setregid16_wrapper + .globl sys32_setregid16_wrapper sys32_setregid16_wrapper: - llgfr %r2,%r2 # __kernel_old_gid_emu31_t - llgfr %r3,%r3 # __kernel_old_gid_emu31_t + llgfr %r2,%r2 # __kernel_old_gid_emu31_t + llgfr %r3,%r3 # __kernel_old_gid_emu31_t jg sys32_setregid16 # branch to system call .globl sys_sigsuspend_wrapper @@ -294,95 +294,95 @@ sys_sigsuspend_wrapper: llgfr %r4,%r4 # old_sigset_t jg sys_sigsuspend - .globl compat_sys_sigpending_wrapper + .globl compat_sys_sigpending_wrapper compat_sys_sigpending_wrapper: llgtr %r2,%r2 # compat_old_sigset_t * jg compat_sys_sigpending # branch to system call - .globl sys32_sethostname_wrapper + .globl sys32_sethostname_wrapper sys32_sethostname_wrapper: llgtr %r2,%r2 # char * lgfr %r3,%r3 # int jg sys_sethostname # branch to system call - .globl compat_sys_setrlimit_wrapper + .globl compat_sys_setrlimit_wrapper compat_sys_setrlimit_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # struct rlimit_emu31 * jg compat_sys_setrlimit # branch to system call - .globl compat_sys_old_getrlimit_wrapper + .globl compat_sys_old_getrlimit_wrapper compat_sys_old_getrlimit_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # struct rlimit_emu31 * jg compat_sys_old_getrlimit # branch to system call - .globl compat_sys_getrlimit_wrapper + .globl compat_sys_getrlimit_wrapper compat_sys_getrlimit_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # struct rlimit_emu31 * jg compat_sys_getrlimit # branch to system call - .globl sys32_mmap2_wrapper + .globl sys32_mmap2_wrapper sys32_mmap2_wrapper: llgtr %r2,%r2 # struct mmap_arg_struct_emu31 * jg sys32_mmap2 # branch to system call - .globl compat_sys_getrusage_wrapper + .globl compat_sys_getrusage_wrapper compat_sys_getrusage_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # struct rusage_emu31 * jg compat_sys_getrusage # branch to system call - .globl sys32_gettimeofday_wrapper + .globl sys32_gettimeofday_wrapper sys32_gettimeofday_wrapper: llgtr %r2,%r2 # struct timeval_emu31 * llgtr %r3,%r3 # struct timezone * jg sys32_gettimeofday # branch to system call - .globl sys32_settimeofday_wrapper + .globl sys32_settimeofday_wrapper sys32_settimeofday_wrapper: llgtr %r2,%r2 # struct timeval_emu31 * llgtr %r3,%r3 # struct timezone * jg sys32_settimeofday # branch to system call - .globl sys32_getgroups16_wrapper + .globl sys32_getgroups16_wrapper sys32_getgroups16_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # __kernel_old_gid_emu31_t * jg sys32_getgroups16 # branch to system call - .globl sys32_setgroups16_wrapper + .globl sys32_setgroups16_wrapper sys32_setgroups16_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # __kernel_old_gid_emu31_t * jg sys32_setgroups16 # branch to system call - .globl sys32_symlink_wrapper + .globl sys32_symlink_wrapper sys32_symlink_wrapper: llgtr %r2,%r2 # const char * llgtr %r3,%r3 # const char * jg sys_symlink # branch to system call - .globl sys32_readlink_wrapper + .globl sys32_readlink_wrapper sys32_readlink_wrapper: llgtr %r2,%r2 # const char * llgtr %r3,%r3 # char * lgfr %r4,%r4 # int jg sys_readlink # branch to system call - .globl sys32_uselib_wrapper + .globl sys32_uselib_wrapper sys32_uselib_wrapper: llgtr %r2,%r2 # const char * jg sys_uselib # branch to system call - .globl sys32_swapon_wrapper + .globl sys32_swapon_wrapper sys32_swapon_wrapper: llgtr %r2,%r2 # const char * lgfr %r3,%r3 # int jg sys_swapon # branch to system call - .globl sys32_reboot_wrapper + .globl sys32_reboot_wrapper sys32_reboot_wrapper: lgfr %r2,%r2 # int lgfr %r3,%r3 # int @@ -390,121 +390,121 @@ sys32_reboot_wrapper: llgtr %r5,%r5 # void * jg sys_reboot # branch to system call - .globl old32_readdir_wrapper + .globl old32_readdir_wrapper old32_readdir_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # void * llgfr %r4,%r4 # unsigned int jg compat_sys_old_readdir # branch to system call - .globl old32_mmap_wrapper + .globl old32_mmap_wrapper old32_mmap_wrapper: llgtr %r2,%r2 # struct mmap_arg_struct_emu31 * jg old32_mmap # branch to system call - .globl sys32_munmap_wrapper + .globl sys32_munmap_wrapper sys32_munmap_wrapper: llgfr %r2,%r2 # unsigned long - llgfr %r3,%r3 # size_t + llgfr %r3,%r3 # size_t jg sys_munmap # branch to system call - .globl sys32_truncate_wrapper + .globl sys32_truncate_wrapper sys32_truncate_wrapper: llgtr %r2,%r2 # const char * llgfr %r3,%r3 # unsigned long jg sys_truncate # branch to system call - .globl sys32_ftruncate_wrapper + .globl sys32_ftruncate_wrapper sys32_ftruncate_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # unsigned long jg sys_ftruncate # branch to system call - .globl sys32_fchmod_wrapper + .globl sys32_fchmod_wrapper sys32_fchmod_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # mode_t jg sys_fchmod # branch to system call - .globl sys32_fchown16_wrapper + .globl sys32_fchown16_wrapper sys32_fchown16_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # compat_uid_t llgfr %r4,%r4 # compat_uid_t jg sys32_fchown16 # branch to system call - .globl sys32_getpriority_wrapper + .globl sys32_getpriority_wrapper sys32_getpriority_wrapper: lgfr %r2,%r2 # int lgfr %r3,%r3 # int jg sys_getpriority # branch to system call - .globl sys32_setpriority_wrapper + .globl sys32_setpriority_wrapper sys32_setpriority_wrapper: lgfr %r2,%r2 # int lgfr %r3,%r3 # int lgfr %r4,%r4 # int jg sys_setpriority # branch to system call - .globl compat_sys_statfs_wrapper + .globl compat_sys_statfs_wrapper compat_sys_statfs_wrapper: llgtr %r2,%r2 # char * llgtr %r3,%r3 # struct compat_statfs * jg compat_sys_statfs # branch to system call - .globl compat_sys_fstatfs_wrapper + .globl compat_sys_fstatfs_wrapper compat_sys_fstatfs_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # struct compat_statfs * jg compat_sys_fstatfs # branch to system call - .globl compat_sys_socketcall_wrapper + .globl compat_sys_socketcall_wrapper compat_sys_socketcall_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # u32 * jg compat_sys_socketcall # branch to system call - .globl sys32_syslog_wrapper + .globl sys32_syslog_wrapper sys32_syslog_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # char * lgfr %r4,%r4 # int jg sys_syslog # branch to system call - .globl compat_sys_setitimer_wrapper + .globl compat_sys_setitimer_wrapper compat_sys_setitimer_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # struct itimerval_emu31 * llgtr %r4,%r4 # struct itimerval_emu31 * jg compat_sys_setitimer # branch to system call - .globl compat_sys_getitimer_wrapper + .globl compat_sys_getitimer_wrapper compat_sys_getitimer_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # struct itimerval_emu31 * jg compat_sys_getitimer # branch to system call - .globl compat_sys_newstat_wrapper + .globl compat_sys_newstat_wrapper compat_sys_newstat_wrapper: llgtr %r2,%r2 # char * llgtr %r3,%r3 # struct stat_emu31 * jg compat_sys_newstat # branch to system call - .globl compat_sys_newlstat_wrapper + .globl compat_sys_newlstat_wrapper compat_sys_newlstat_wrapper: llgtr %r2,%r2 # char * llgtr %r3,%r3 # struct stat_emu31 * jg compat_sys_newlstat # branch to system call - .globl compat_sys_newfstat_wrapper + .globl compat_sys_newfstat_wrapper compat_sys_newfstat_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # struct stat_emu31 * jg compat_sys_newfstat # branch to system call -#sys32_vhangup_wrapper # void +#sys32_vhangup_wrapper # void - .globl compat_sys_wait4_wrapper + .globl compat_sys_wait4_wrapper compat_sys_wait4_wrapper: lgfr %r2,%r2 # pid_t llgtr %r3,%r3 # unsigned int * @@ -512,17 +512,17 @@ compat_sys_wait4_wrapper: llgtr %r5,%r5 # struct rusage * jg compat_sys_wait4 # branch to system call - .globl sys32_swapoff_wrapper + .globl sys32_swapoff_wrapper sys32_swapoff_wrapper: llgtr %r2,%r2 # const char * jg sys_swapoff # branch to system call - .globl sys32_sysinfo_wrapper + .globl sys32_sysinfo_wrapper sys32_sysinfo_wrapper: llgtr %r2,%r2 # struct sysinfo_emu31 * jg sys32_sysinfo # branch to system call - .globl sys32_ipc_wrapper + .globl sys32_ipc_wrapper sys32_ipc_wrapper: llgfr %r2,%r2 # uint lgfr %r3,%r3 # int @@ -531,59 +531,59 @@ sys32_ipc_wrapper: llgfr %r6,%r6 # u32 jg sys32_ipc # branch to system call - .globl sys32_fsync_wrapper + .globl sys32_fsync_wrapper sys32_fsync_wrapper: llgfr %r2,%r2 # unsigned int jg sys_fsync # branch to system call -#sys32_sigreturn_wrapper # done in sigreturn_glue +#sys32_sigreturn_wrapper # done in sigreturn_glue -#sys32_clone_wrapper # done in clone_glue +#sys32_clone_wrapper # done in clone_glue - .globl sys32_setdomainname_wrapper + .globl sys32_setdomainname_wrapper sys32_setdomainname_wrapper: llgtr %r2,%r2 # char * lgfr %r3,%r3 # int jg sys_setdomainname # branch to system call - .globl sys32_newuname_wrapper + .globl sys32_newuname_wrapper sys32_newuname_wrapper: llgtr %r2,%r2 # struct new_utsname * jg s390x_newuname # branch to system call - .globl compat_sys_adjtimex_wrapper + .globl compat_sys_adjtimex_wrapper compat_sys_adjtimex_wrapper: llgtr %r2,%r2 # struct compat_timex * jg compat_sys_adjtimex # branch to system call - .globl sys32_mprotect_wrapper + .globl sys32_mprotect_wrapper sys32_mprotect_wrapper: llgtr %r2,%r2 # unsigned long (actually pointer llgfr %r3,%r3 # size_t llgfr %r4,%r4 # unsigned long jg sys_mprotect # branch to system call - .globl compat_sys_sigprocmask_wrapper + .globl compat_sys_sigprocmask_wrapper compat_sys_sigprocmask_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # compat_old_sigset_t * llgtr %r4,%r4 # compat_old_sigset_t * jg compat_sys_sigprocmask # branch to system call - .globl sys32_init_module_wrapper + .globl sys32_init_module_wrapper sys32_init_module_wrapper: llgtr %r2,%r2 # void * llgfr %r3,%r3 # unsigned long llgtr %r4,%r4 # char * jg sys32_init_module # branch to system call - .globl sys32_delete_module_wrapper + .globl sys32_delete_module_wrapper sys32_delete_module_wrapper: llgtr %r2,%r2 # const char * llgfr %r3,%r3 # unsigned int jg sys32_delete_module # branch to system call - .globl sys32_quotactl_wrapper + .globl sys32_quotactl_wrapper sys32_quotactl_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # const char * @@ -591,45 +591,45 @@ sys32_quotactl_wrapper: llgtr %r5,%r5 # caddr_t jg sys_quotactl # branch to system call - .globl sys32_getpgid_wrapper + .globl sys32_getpgid_wrapper sys32_getpgid_wrapper: lgfr %r2,%r2 # pid_t jg sys_getpgid # branch to system call - .globl sys32_fchdir_wrapper + .globl sys32_fchdir_wrapper sys32_fchdir_wrapper: llgfr %r2,%r2 # unsigned int jg sys_fchdir # branch to system call - .globl sys32_bdflush_wrapper + .globl sys32_bdflush_wrapper sys32_bdflush_wrapper: lgfr %r2,%r2 # int lgfr %r3,%r3 # long jg sys_bdflush # branch to system call - .globl sys32_sysfs_wrapper + .globl sys32_sysfs_wrapper sys32_sysfs_wrapper: lgfr %r2,%r2 # int llgfr %r3,%r3 # unsigned long llgfr %r4,%r4 # unsigned long jg sys_sysfs # branch to system call - .globl sys32_personality_wrapper + .globl sys32_personality_wrapper sys32_personality_wrapper: llgfr %r2,%r2 # unsigned long jg s390x_personality # branch to system call - .globl sys32_setfsuid16_wrapper + .globl sys32_setfsuid16_wrapper sys32_setfsuid16_wrapper: - llgfr %r2,%r2 # __kernel_old_uid_emu31_t + llgfr %r2,%r2 # __kernel_old_uid_emu31_t jg sys32_setfsuid16 # branch to system call - .globl sys32_setfsgid16_wrapper + .globl sys32_setfsgid16_wrapper sys32_setfsgid16_wrapper: - llgfr %r2,%r2 # __kernel_old_gid_emu31_t + llgfr %r2,%r2 # __kernel_old_gid_emu31_t jg sys32_setfsgid16 # branch to system call - .globl sys32_llseek_wrapper + .globl sys32_llseek_wrapper sys32_llseek_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # unsigned long @@ -638,14 +638,14 @@ sys32_llseek_wrapper: llgfr %r6,%r6 # unsigned int jg sys_llseek # branch to system call - .globl sys32_getdents_wrapper + .globl sys32_getdents_wrapper sys32_getdents_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # void * llgfr %r4,%r4 # unsigned int jg compat_sys_getdents # branch to system call - .globl compat_sys_select_wrapper + .globl compat_sys_select_wrapper compat_sys_select_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # compat_fd_set * @@ -654,113 +654,113 @@ compat_sys_select_wrapper: llgtr %r6,%r6 # struct compat_timeval * jg compat_sys_select # branch to system call - .globl sys32_flock_wrapper + .globl sys32_flock_wrapper sys32_flock_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # unsigned int jg sys_flock # branch to system call - .globl sys32_msync_wrapper + .globl sys32_msync_wrapper sys32_msync_wrapper: llgfr %r2,%r2 # unsigned long llgfr %r3,%r3 # size_t lgfr %r4,%r4 # int jg sys_msync # branch to system call - .globl compat_sys_readv_wrapper + .globl compat_sys_readv_wrapper compat_sys_readv_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # const struct compat_iovec * llgfr %r4,%r4 # unsigned long jg compat_sys_readv # branch to system call - .globl compat_sys_writev_wrapper + .globl compat_sys_writev_wrapper compat_sys_writev_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # const struct compat_iovec * llgfr %r4,%r4 # unsigned long jg compat_sys_writev # branch to system call - .globl sys32_getsid_wrapper + .globl sys32_getsid_wrapper sys32_getsid_wrapper: lgfr %r2,%r2 # pid_t jg sys_getsid # branch to system call - .globl sys32_fdatasync_wrapper + .globl sys32_fdatasync_wrapper sys32_fdatasync_wrapper: llgfr %r2,%r2 # unsigned int jg sys_fdatasync # branch to system call -#sys32_sysctl_wrapper # tbd +#sys32_sysctl_wrapper # tbd - .globl sys32_mlock_wrapper + .globl sys32_mlock_wrapper sys32_mlock_wrapper: llgfr %r2,%r2 # unsigned long llgfr %r3,%r3 # size_t jg sys_mlock # branch to system call - .globl sys32_munlock_wrapper + .globl sys32_munlock_wrapper sys32_munlock_wrapper: llgfr %r2,%r2 # unsigned long llgfr %r3,%r3 # size_t jg sys_munlock # branch to system call - .globl sys32_mlockall_wrapper + .globl sys32_mlockall_wrapper sys32_mlockall_wrapper: lgfr %r2,%r2 # int jg sys_mlockall # branch to system call -#sys32_munlockall_wrapper # void +#sys32_munlockall_wrapper # void - .globl sys32_sched_setparam_wrapper + .globl sys32_sched_setparam_wrapper sys32_sched_setparam_wrapper: lgfr %r2,%r2 # pid_t llgtr %r3,%r3 # struct sched_param * jg sys_sched_setparam # branch to system call - .globl sys32_sched_getparam_wrapper + .globl sys32_sched_getparam_wrapper sys32_sched_getparam_wrapper: lgfr %r2,%r2 # pid_t llgtr %r3,%r3 # struct sched_param * jg sys_sched_getparam # branch to system call - .globl sys32_sched_setscheduler_wrapper + .globl sys32_sched_setscheduler_wrapper sys32_sched_setscheduler_wrapper: lgfr %r2,%r2 # pid_t lgfr %r3,%r3 # int llgtr %r4,%r4 # struct sched_param * jg sys_sched_setscheduler # branch to system call - .globl sys32_sched_getscheduler_wrapper + .globl sys32_sched_getscheduler_wrapper sys32_sched_getscheduler_wrapper: lgfr %r2,%r2 # pid_t jg sys_sched_getscheduler # branch to system call -#sys32_sched_yield_wrapper # void +#sys32_sched_yield_wrapper # void - .globl sys32_sched_get_priority_max_wrapper + .globl sys32_sched_get_priority_max_wrapper sys32_sched_get_priority_max_wrapper: lgfr %r2,%r2 # int jg sys_sched_get_priority_max # branch to system call - .globl sys32_sched_get_priority_min_wrapper + .globl sys32_sched_get_priority_min_wrapper sys32_sched_get_priority_min_wrapper: lgfr %r2,%r2 # int jg sys_sched_get_priority_min # branch to system call - .globl sys32_sched_rr_get_interval_wrapper + .globl sys32_sched_rr_get_interval_wrapper sys32_sched_rr_get_interval_wrapper: lgfr %r2,%r2 # pid_t llgtr %r3,%r3 # struct compat_timespec * jg sys32_sched_rr_get_interval # branch to system call - .globl compat_sys_nanosleep_wrapper + .globl compat_sys_nanosleep_wrapper compat_sys_nanosleep_wrapper: llgtr %r2,%r2 # struct compat_timespec * llgtr %r3,%r3 # struct compat_timespec * jg compat_sys_nanosleep # branch to system call - .globl sys32_mremap_wrapper + .globl sys32_mremap_wrapper sys32_mremap_wrapper: llgfr %r2,%r2 # unsigned long llgfr %r3,%r3 # unsigned long @@ -769,49 +769,49 @@ sys32_mremap_wrapper: llgfr %r6,%r6 # unsigned long jg sys_mremap # branch to system call - .globl sys32_setresuid16_wrapper + .globl sys32_setresuid16_wrapper sys32_setresuid16_wrapper: - llgfr %r2,%r2 # __kernel_old_uid_emu31_t - llgfr %r3,%r3 # __kernel_old_uid_emu31_t - llgfr %r4,%r4 # __kernel_old_uid_emu31_t + llgfr %r2,%r2 # __kernel_old_uid_emu31_t + llgfr %r3,%r3 # __kernel_old_uid_emu31_t + llgfr %r4,%r4 # __kernel_old_uid_emu31_t jg sys32_setresuid16 # branch to system call - .globl sys32_getresuid16_wrapper + .globl sys32_getresuid16_wrapper sys32_getresuid16_wrapper: llgtr %r2,%r2 # __kernel_old_uid_emu31_t * llgtr %r3,%r3 # __kernel_old_uid_emu31_t * llgtr %r4,%r4 # __kernel_old_uid_emu31_t * jg sys32_getresuid16 # branch to system call - .globl sys32_poll_wrapper + .globl sys32_poll_wrapper sys32_poll_wrapper: - llgtr %r2,%r2 # struct pollfd * - llgfr %r3,%r3 # unsigned int - lgfr %r4,%r4 # long + llgtr %r2,%r2 # struct pollfd * + llgfr %r3,%r3 # unsigned int + lgfr %r4,%r4 # long jg sys_poll # branch to system call - .globl compat_sys_nfsservctl_wrapper + .globl compat_sys_nfsservctl_wrapper compat_sys_nfsservctl_wrapper: - lgfr %r2,%r2 # int + lgfr %r2,%r2 # int llgtr %r3,%r3 # struct compat_nfsctl_arg* llgtr %r4,%r4 # union compat_nfsctl_res* jg compat_sys_nfsservctl # branch to system call - .globl sys32_setresgid16_wrapper + .globl sys32_setresgid16_wrapper sys32_setresgid16_wrapper: - llgfr %r2,%r2 # __kernel_old_gid_emu31_t - llgfr %r3,%r3 # __kernel_old_gid_emu31_t - llgfr %r4,%r4 # __kernel_old_gid_emu31_t + llgfr %r2,%r2 # __kernel_old_gid_emu31_t + llgfr %r3,%r3 # __kernel_old_gid_emu31_t + llgfr %r4,%r4 # __kernel_old_gid_emu31_t jg sys32_setresgid16 # branch to system call - .globl sys32_getresgid16_wrapper + .globl sys32_getresgid16_wrapper sys32_getresgid16_wrapper: llgtr %r2,%r2 # __kernel_old_gid_emu31_t * llgtr %r3,%r3 # __kernel_old_gid_emu31_t * llgtr %r4,%r4 # __kernel_old_gid_emu31_t * jg sys32_getresgid16 # branch to system call - .globl sys32_prctl_wrapper + .globl sys32_prctl_wrapper sys32_prctl_wrapper: lgfr %r2,%r2 # int llgfr %r3,%r3 # unsigned long @@ -820,9 +820,9 @@ sys32_prctl_wrapper: llgfr %r6,%r6 # unsigned long jg sys_prctl # branch to system call -#sys32_rt_sigreturn_wrapper # done in rt_sigreturn_glue +#sys32_rt_sigreturn_wrapper # done in rt_sigreturn_glue - .globl sys32_rt_sigaction_wrapper + .globl sys32_rt_sigaction_wrapper sys32_rt_sigaction_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # const struct sigaction_emu31 * @@ -830,7 +830,7 @@ sys32_rt_sigaction_wrapper: llgfr %r5,%r5 # size_t jg sys32_rt_sigaction # branch to system call - .globl sys32_rt_sigprocmask_wrapper + .globl sys32_rt_sigprocmask_wrapper sys32_rt_sigprocmask_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # old_sigset_emu31 * @@ -838,13 +838,13 @@ sys32_rt_sigprocmask_wrapper: llgfr %r5,%r5 # size_t jg sys32_rt_sigprocmask # branch to system call - .globl sys32_rt_sigpending_wrapper + .globl sys32_rt_sigpending_wrapper sys32_rt_sigpending_wrapper: llgtr %r2,%r2 # sigset_emu31 * llgfr %r3,%r3 # size_t jg sys32_rt_sigpending # branch to system call - .globl compat_sys_rt_sigtimedwait_wrapper + .globl compat_sys_rt_sigtimedwait_wrapper compat_sys_rt_sigtimedwait_wrapper: llgtr %r2,%r2 # const sigset_emu31_t * llgtr %r3,%r3 # siginfo_emu31_t * @@ -852,7 +852,7 @@ compat_sys_rt_sigtimedwait_wrapper: llgfr %r5,%r5 # size_t jg compat_sys_rt_sigtimedwait # branch to system call - .globl sys32_rt_sigqueueinfo_wrapper + .globl sys32_rt_sigqueueinfo_wrapper sys32_rt_sigqueueinfo_wrapper: lgfr %r2,%r2 # int lgfr %r3,%r3 # int @@ -865,7 +865,7 @@ compat_sys_rt_sigsuspend_wrapper: llgfr %r3,%r3 # compat_size_t jg compat_sys_rt_sigsuspend - .globl sys32_pread64_wrapper + .globl sys32_pread64_wrapper sys32_pread64_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # char * @@ -874,7 +874,7 @@ sys32_pread64_wrapper: llgfr %r6,%r6 # u32 jg sys32_pread64 # branch to system call - .globl sys32_pwrite64_wrapper + .globl sys32_pwrite64_wrapper sys32_pwrite64_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # const char * @@ -883,26 +883,26 @@ sys32_pwrite64_wrapper: llgfr %r6,%r6 # u32 jg sys32_pwrite64 # branch to system call - .globl sys32_chown16_wrapper + .globl sys32_chown16_wrapper sys32_chown16_wrapper: llgtr %r2,%r2 # const char * - llgfr %r3,%r3 # __kernel_old_uid_emu31_t - llgfr %r4,%r4 # __kernel_old_gid_emu31_t + llgfr %r3,%r3 # __kernel_old_uid_emu31_t + llgfr %r4,%r4 # __kernel_old_gid_emu31_t jg sys32_chown16 # branch to system call - .globl sys32_getcwd_wrapper + .globl sys32_getcwd_wrapper sys32_getcwd_wrapper: llgtr %r2,%r2 # char * llgfr %r3,%r3 # unsigned long jg sys_getcwd # branch to system call - .globl sys32_capget_wrapper + .globl sys32_capget_wrapper sys32_capget_wrapper: llgtr %r2,%r2 # cap_user_header_t llgtr %r3,%r3 # cap_user_data_t jg sys_capget # branch to system call - .globl sys32_capset_wrapper + .globl sys32_capset_wrapper sys32_capset_wrapper: llgtr %r2,%r2 # cap_user_header_t llgtr %r3,%r3 # const cap_user_data_t @@ -910,11 +910,11 @@ sys32_capset_wrapper: .globl sys32_sigaltstack_wrapper sys32_sigaltstack_wrapper: - llgtr %r2,%r2 # const stack_emu31_t * - llgtr %r3,%r3 # stack_emu31_t * + llgtr %r2,%r2 # const stack_emu31_t * + llgtr %r3,%r3 # stack_emu31_t * jg sys32_sigaltstack - .globl sys32_sendfile_wrapper + .globl sys32_sendfile_wrapper sys32_sendfile_wrapper: lgfr %r2,%r2 # int lgfr %r3,%r3 # int @@ -922,33 +922,33 @@ sys32_sendfile_wrapper: llgfr %r5,%r5 # size_t jg sys32_sendfile # branch to system call -#sys32_vfork_wrapper # done in vfork_glue +#sys32_vfork_wrapper # done in vfork_glue - .globl sys32_truncate64_wrapper + .globl sys32_truncate64_wrapper sys32_truncate64_wrapper: llgtr %r2,%r2 # const char * llgfr %r3,%r3 # unsigned long llgfr %r4,%r4 # unsigned long jg sys32_truncate64 # branch to system call - .globl sys32_ftruncate64_wrapper + .globl sys32_ftruncate64_wrapper sys32_ftruncate64_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # unsigned long llgfr %r4,%r4 # unsigned long jg sys32_ftruncate64 # branch to system call - .globl sys32_lchown_wrapper + .globl sys32_lchown_wrapper sys32_lchown_wrapper: llgtr %r2,%r2 # const char * llgfr %r3,%r3 # uid_t llgfr %r4,%r4 # gid_t jg sys_lchown # branch to system call -#sys32_getuid_wrapper # void -#sys32_getgid_wrapper # void -#sys32_geteuid_wrapper # void -#sys32_getegid_wrapper # void +#sys32_getuid_wrapper # void +#sys32_getgid_wrapper # void +#sys32_geteuid_wrapper # void +#sys32_getegid_wrapper # void .globl sys32_setreuid_wrapper sys32_setreuid_wrapper: @@ -962,111 +962,111 @@ sys32_setregid_wrapper: llgfr %r3,%r3 # gid_t jg sys_setregid # branch to system call - .globl sys32_getgroups_wrapper + .globl sys32_getgroups_wrapper sys32_getgroups_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # gid_t * jg sys_getgroups # branch to system call - .globl sys32_setgroups_wrapper + .globl sys32_setgroups_wrapper sys32_setgroups_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # gid_t * jg sys_setgroups # branch to system call - .globl sys32_fchown_wrapper + .globl sys32_fchown_wrapper sys32_fchown_wrapper: llgfr %r2,%r2 # unsigned int llgfr %r3,%r3 # uid_t llgfr %r4,%r4 # gid_t jg sys_fchown # branch to system call - .globl sys32_setresuid_wrapper + .globl sys32_setresuid_wrapper sys32_setresuid_wrapper: llgfr %r2,%r2 # uid_t llgfr %r3,%r3 # uid_t llgfr %r4,%r4 # uid_t jg sys_setresuid # branch to system call - .globl sys32_getresuid_wrapper + .globl sys32_getresuid_wrapper sys32_getresuid_wrapper: llgtr %r2,%r2 # uid_t * llgtr %r3,%r3 # uid_t * llgtr %r4,%r4 # uid_t * jg sys_getresuid # branch to system call - .globl sys32_setresgid_wrapper + .globl sys32_setresgid_wrapper sys32_setresgid_wrapper: llgfr %r2,%r2 # gid_t llgfr %r3,%r3 # gid_t llgfr %r4,%r4 # gid_t jg sys_setresgid # branch to system call - .globl sys32_getresgid_wrapper + .globl sys32_getresgid_wrapper sys32_getresgid_wrapper: llgtr %r2,%r2 # gid_t * llgtr %r3,%r3 # gid_t * llgtr %r4,%r4 # gid_t * jg sys_getresgid # branch to system call - .globl sys32_chown_wrapper + .globl sys32_chown_wrapper sys32_chown_wrapper: llgtr %r2,%r2 # const char * llgfr %r3,%r3 # uid_t llgfr %r4,%r4 # gid_t jg sys_chown # branch to system call - .globl sys32_setuid_wrapper + .globl sys32_setuid_wrapper sys32_setuid_wrapper: llgfr %r2,%r2 # uid_t jg sys_setuid # branch to system call - .globl sys32_setgid_wrapper + .globl sys32_setgid_wrapper sys32_setgid_wrapper: llgfr %r2,%r2 # gid_t jg sys_setgid # branch to system call - .globl sys32_setfsuid_wrapper + .globl sys32_setfsuid_wrapper sys32_setfsuid_wrapper: llgfr %r2,%r2 # uid_t jg sys_setfsuid # branch to system call - .globl sys32_setfsgid_wrapper + .globl sys32_setfsgid_wrapper sys32_setfsgid_wrapper: llgfr %r2,%r2 # gid_t jg sys_setfsgid # branch to system call - .globl sys32_pivot_root_wrapper + .globl sys32_pivot_root_wrapper sys32_pivot_root_wrapper: llgtr %r2,%r2 # const char * llgtr %r3,%r3 # const char * jg sys_pivot_root # branch to system call - .globl sys32_mincore_wrapper + .globl sys32_mincore_wrapper sys32_mincore_wrapper: llgfr %r2,%r2 # unsigned long llgfr %r3,%r3 # size_t llgtr %r4,%r4 # unsigned char * jg sys_mincore # branch to system call - .globl sys32_madvise_wrapper + .globl sys32_madvise_wrapper sys32_madvise_wrapper: llgfr %r2,%r2 # unsigned long llgfr %r3,%r3 # size_t lgfr %r4,%r4 # int jg sys_madvise # branch to system call - .globl sys32_getdents64_wrapper + .globl sys32_getdents64_wrapper sys32_getdents64_wrapper: llgfr %r2,%r2 # unsigned int llgtr %r3,%r3 # void * llgfr %r4,%r4 # unsigned int jg sys_getdents64 # branch to system call - .globl compat_sys_fcntl64_wrapper + .globl compat_sys_fcntl64_wrapper compat_sys_fcntl64_wrapper: llgfr %r2,%r2 # unsigned int - llgfr %r3,%r3 # unsigned int + llgfr %r3,%r3 # unsigned int llgfr %r4,%r4 # unsigned long jg compat_sys_fcntl64 # branch to system call @@ -1087,10 +1087,10 @@ sys32_stime_wrapper: llgtr %r2,%r2 # long * jg compat_sys_stime # branch to system call - .globl sys32_sysctl_wrapper + .globl sys32_sysctl_wrapper sys32_sysctl_wrapper: - llgtr %r2,%r2 # struct __sysctl_args32 * - jg sys32_sysctl + llgtr %r2,%r2 # struct __sysctl_args32 * + jg sys32_sysctl .globl sys32_fstat64_wrapper sys32_fstat64_wrapper: @@ -1098,7 +1098,7 @@ sys32_fstat64_wrapper: llgtr %r3,%r3 # struct stat64 * jg sys32_fstat64 # branch to system call - .globl compat_sys_futex_wrapper + .globl compat_sys_futex_wrapper compat_sys_futex_wrapper: llgtr %r2,%r2 # u32 * lgfr %r3,%r3 # int @@ -1213,22 +1213,22 @@ sys32_sched_getaffinity_wrapper: llgtr %r4,%r4 # unsigned long * jg compat_sys_sched_getaffinity - .globl sys32_exit_group_wrapper + .globl sys32_exit_group_wrapper sys32_exit_group_wrapper: lgfr %r2,%r2 # int jg sys_exit_group # branch to system call - .globl sys32_set_tid_address_wrapper + .globl sys32_set_tid_address_wrapper sys32_set_tid_address_wrapper: llgtr %r2,%r2 # int * jg sys_set_tid_address # branch to system call - .globl sys_epoll_create_wrapper + .globl sys_epoll_create_wrapper sys_epoll_create_wrapper: lgfr %r2,%r2 # int jg sys_epoll_create # branch to system call - .globl sys_epoll_ctl_wrapper + .globl sys_epoll_ctl_wrapper sys_epoll_ctl_wrapper: lgfr %r2,%r2 # int lgfr %r3,%r3 # int @@ -1236,7 +1236,7 @@ sys_epoll_ctl_wrapper: llgtr %r5,%r5 # struct epoll_event * jg sys_epoll_ctl # branch to system call - .globl sys_epoll_wait_wrapper + .globl sys_epoll_wait_wrapper sys_epoll_wait_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # struct epoll_event * diff --git a/arch/s390/kernel/cpcmd.c b/arch/s390/kernel/cpcmd.c index 4ef44e536b2c..1eae74e72f95 100644 --- a/arch/s390/kernel/cpcmd.c +++ b/arch/s390/kernel/cpcmd.c @@ -25,11 +25,8 @@ static char cpcmd_buf[241]; */ int __cpcmd(const char *cmd, char *response, int rlen, int *response_code) { - const int mask = 0x40000000L; - unsigned long flags; - int return_code; - int return_len; - int cmdlen; + unsigned long flags, cmdlen; + int return_code, return_len; spin_lock_irqsave(&cpcmd_lock, flags); cmdlen = strlen(cmd); @@ -38,64 +35,44 @@ int __cpcmd(const char *cmd, char *response, int rlen, int *response_code) ASCEBC(cpcmd_buf, cmdlen); if (response != NULL && rlen > 0) { + register unsigned long reg2 asm ("2") = (addr_t) cpcmd_buf; + register unsigned long reg3 asm ("3") = (addr_t) response; + register unsigned long reg4 asm ("4") = cmdlen | 0x40000000L; + register unsigned long reg5 asm ("5") = rlen; + memset(response, 0, rlen); + asm volatile( #ifndef CONFIG_64BIT - asm volatile ( "lra 2,0(%2)\n" - "lr 4,%3\n" - "o 4,%6\n" - "lra 3,0(%4)\n" - "lr 5,%5\n" - "diag 2,4,0x8\n" - "brc 8, 1f\n" - "ar 5, %5\n" - "1: \n" - "lr %0,4\n" - "lr %1,5\n" - : "=d" (return_code), "=d" (return_len) - : "a" (cpcmd_buf), "d" (cmdlen), - "a" (response), "d" (rlen), "m" (mask) - : "cc", "2", "3", "4", "5" ); + " diag %2,%0,0x8\n" + " brc 8,1f\n" + " ar %1,%4\n" #else /* CONFIG_64BIT */ - asm volatile ( "lrag 2,0(%2)\n" - "lgr 4,%3\n" - "o 4,%6\n" - "lrag 3,0(%4)\n" - "lgr 5,%5\n" - "sam31\n" - "diag 2,4,0x8\n" - "sam64\n" - "brc 8, 1f\n" - "agr 5, %5\n" - "1: \n" - "lgr %0,4\n" - "lgr %1,5\n" - : "=d" (return_code), "=d" (return_len) - : "a" (cpcmd_buf), "d" (cmdlen), - "a" (response), "d" (rlen), "m" (mask) - : "cc", "2", "3", "4", "5" ); + " sam31\n" + " diag %2,%0,0x8\n" + " sam64\n" + " brc 8,1f\n" + " agr %1,%4\n" #endif /* CONFIG_64BIT */ + "1:\n" + : "+d" (reg4), "+d" (reg5) + : "d" (reg2), "d" (reg3), "d" (rlen) : "cc"); + return_code = (int) reg4; + return_len = (int) reg5; EBCASC(response, rlen); } else { + register unsigned long reg2 asm ("2") = (addr_t) cpcmd_buf; + register unsigned long reg3 asm ("3") = cmdlen; return_len = 0; + asm volatile( #ifndef CONFIG_64BIT - asm volatile ( "lra 2,0(%1)\n" - "lr 3,%2\n" - "diag 2,3,0x8\n" - "lr %0,3\n" - : "=d" (return_code) - : "a" (cpcmd_buf), "d" (cmdlen) - : "2", "3" ); + " diag %1,%0,0x8\n" #else /* CONFIG_64BIT */ - asm volatile ( "lrag 2,0(%1)\n" - "lgr 3,%2\n" - "sam31\n" - "diag 2,3,0x8\n" - "sam64\n" - "lgr %0,3\n" - : "=d" (return_code) - : "a" (cpcmd_buf), "d" (cmdlen) - : "2", "3" ); + " sam31\n" + " diag %1,%0,0x8\n" + " sam64\n" #endif /* CONFIG_64BIT */ + : "+d" (reg3) : "d" (reg2) : "cc"); + return_code = (int) reg3; } spin_unlock_irqrestore(&cpcmd_lock, flags); if (response_code != NULL) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 0c712b78a7e8..dddc3de30401 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -4,8 +4,8 @@ * * Copyright (C) IBM Corp. 1999,2006 * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), - * Hartmut Penner (hp@de.ibm.com), - * Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), + * Hartmut Penner (hp@de.ibm.com), + * Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), * Heiko Carstens <heiko.carstens@de.ibm.com> */ @@ -24,29 +24,29 @@ * Stack layout for the system_call stack entry. * The first few entries are identical to the user_regs_struct. */ -SP_PTREGS = STACK_FRAME_OVERHEAD -SP_ARGS = STACK_FRAME_OVERHEAD + __PT_ARGS -SP_PSW = STACK_FRAME_OVERHEAD + __PT_PSW -SP_R0 = STACK_FRAME_OVERHEAD + __PT_GPRS -SP_R1 = STACK_FRAME_OVERHEAD + __PT_GPRS + 4 -SP_R2 = STACK_FRAME_OVERHEAD + __PT_GPRS + 8 -SP_R3 = STACK_FRAME_OVERHEAD + __PT_GPRS + 12 -SP_R4 = STACK_FRAME_OVERHEAD + __PT_GPRS + 16 -SP_R5 = STACK_FRAME_OVERHEAD + __PT_GPRS + 20 -SP_R6 = STACK_FRAME_OVERHEAD + __PT_GPRS + 24 -SP_R7 = STACK_FRAME_OVERHEAD + __PT_GPRS + 28 -SP_R8 = STACK_FRAME_OVERHEAD + __PT_GPRS + 32 -SP_R9 = STACK_FRAME_OVERHEAD + __PT_GPRS + 36 -SP_R10 = STACK_FRAME_OVERHEAD + __PT_GPRS + 40 -SP_R11 = STACK_FRAME_OVERHEAD + __PT_GPRS + 44 -SP_R12 = STACK_FRAME_OVERHEAD + __PT_GPRS + 48 -SP_R13 = STACK_FRAME_OVERHEAD + __PT_GPRS + 52 -SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 56 -SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 60 -SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2 -SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC -SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP -SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE +SP_PTREGS = STACK_FRAME_OVERHEAD +SP_ARGS = STACK_FRAME_OVERHEAD + __PT_ARGS +SP_PSW = STACK_FRAME_OVERHEAD + __PT_PSW +SP_R0 = STACK_FRAME_OVERHEAD + __PT_GPRS +SP_R1 = STACK_FRAME_OVERHEAD + __PT_GPRS + 4 +SP_R2 = STACK_FRAME_OVERHEAD + __PT_GPRS + 8 +SP_R3 = STACK_FRAME_OVERHEAD + __PT_GPRS + 12 +SP_R4 = STACK_FRAME_OVERHEAD + __PT_GPRS + 16 +SP_R5 = STACK_FRAME_OVERHEAD + __PT_GPRS + 20 +SP_R6 = STACK_FRAME_OVERHEAD + __PT_GPRS + 24 +SP_R7 = STACK_FRAME_OVERHEAD + __PT_GPRS + 28 +SP_R8 = STACK_FRAME_OVERHEAD + __PT_GPRS + 32 +SP_R9 = STACK_FRAME_OVERHEAD + __PT_GPRS + 36 +SP_R10 = STACK_FRAME_OVERHEAD + __PT_GPRS + 40 +SP_R11 = STACK_FRAME_OVERHEAD + __PT_GPRS + 44 +SP_R12 = STACK_FRAME_OVERHEAD + __PT_GPRS + 48 +SP_R13 = STACK_FRAME_OVERHEAD + __PT_GPRS + 52 +SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 56 +SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 60 +SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2 +SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC +SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP +SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \ _TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_SINGLE_STEP ) @@ -81,14 +81,14 @@ STACK_SIZE = 1 << STACK_SHIFT * R15 - kernel stack pointer */ - .macro STORE_TIMER lc_offset + .macro STORE_TIMER lc_offset #ifdef CONFIG_VIRT_CPU_ACCOUNTING stpt \lc_offset #endif .endm #ifdef CONFIG_VIRT_CPU_ACCOUNTING - .macro UPDATE_VTIME lc_from,lc_to,lc_sum + .macro UPDATE_VTIME lc_from,lc_to,lc_sum lm %r10,%r11,\lc_from sl %r10,\lc_to sl %r11,\lc_to+4 @@ -147,7 +147,7 @@ STACK_SIZE = 1 << STACK_SHIFT 2: .endm - .macro CREATE_STACK_FRAME psworg,savearea + .macro CREATE_STACK_FRAME psworg,savearea s %r15,BASED(.Lc_spsize) # make room for registers & psw mvc SP_PSW(8,%r15),0(%r12) # move user PSW to stack la %r12,\psworg @@ -160,7 +160,7 @@ STACK_SIZE = 1 << STACK_SHIFT st %r12,__SF_BACKCHAIN(%r15) # clear back chain .endm - .macro RESTORE_ALL psworg,sync + .macro RESTORE_ALL psworg,sync mvc \psworg(8),SP_PSW(%r15) # move user PSW to lowcore .if !\sync ni \psworg+1,0xfd # clear wait state bit @@ -177,16 +177,16 @@ STACK_SIZE = 1 << STACK_SHIFT * Returns: * gpr2 = prev */ - .globl __switch_to + .globl __switch_to __switch_to: - basr %r1,0 + basr %r1,0 __switch_to_base: tm __THREAD_per(%r3),0xe8 # new process is using per ? bz __switch_to_noper-__switch_to_base(%r1) # if not we're fine - stctl %c9,%c11,__SF_EMPTY(%r15) # We are using per stuff - clc __THREAD_per(12,%r3),__SF_EMPTY(%r15) - be __switch_to_noper-__switch_to_base(%r1) # we got away w/o bashing TLB's - lctl %c9,%c11,__THREAD_per(%r3) # Nope we didn't + stctl %c9,%c11,__SF_EMPTY(%r15) # We are using per stuff + clc __THREAD_per(12,%r3),__SF_EMPTY(%r15) + be __switch_to_noper-__switch_to_base(%r1) # we got away w/o bashing TLB's + lctl %c9,%c11,__THREAD_per(%r3) # Nope we didn't __switch_to_noper: l %r4,__THREAD_info(%r2) # get thread_info of prev tm __TI_flags+3(%r4),_TIF_MCCK_PENDING # machine check pending? @@ -195,13 +195,13 @@ __switch_to_noper: l %r4,__THREAD_info(%r3) # get thread_info of next oi __TI_flags+3(%r4),_TIF_MCCK_PENDING # set it in next __switch_to_no_mcck: - stm %r6,%r15,__SF_GPRS(%r15)# store __switch_to registers of prev task + stm %r6,%r15,__SF_GPRS(%r15)# store __switch_to registers of prev task st %r15,__THREAD_ksp(%r2) # store kernel stack to prev->tss.ksp l %r15,__THREAD_ksp(%r3) # load kernel stack from next->tss.ksp lm %r6,%r15,__SF_GPRS(%r15)# load __switch_to registers of next task st %r3,__LC_CURRENT # __LC_CURRENT = current task struct lctl %c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4 - l %r3,__THREAD_info(%r3) # load thread_info from task struct + l %r3,__THREAD_info(%r3) # load thread_info from task struct st %r3,__LC_THREAD_INFO ahi %r3,STACK_SIZE st %r3,__LC_KERNEL_STACK # __LC_KERNEL_STACK = new kernel stack @@ -213,7 +213,7 @@ __critical_start: * are executed with interrupts enabled. */ - .globl system_call + .globl system_call system_call: STORE_TIMER __LC_SYNC_ENTER_TIMER sysc_saveall: @@ -233,24 +233,24 @@ sysc_update: #endif sysc_do_svc: l %r9,__LC_THREAD_INFO # load pointer to thread_info struct - sla %r7,2 # *4 and test for svc 0 - bnz BASED(sysc_nr_ok) # svc number > 0 + sla %r7,2 # *4 and test for svc 0 + bnz BASED(sysc_nr_ok) # svc number > 0 # svc 0: system call number in %r1 cl %r1,BASED(.Lnr_syscalls) bnl BASED(sysc_nr_ok) - lr %r7,%r1 # copy svc number to %r7 - sla %r7,2 # *4 + lr %r7,%r1 # copy svc number to %r7 + sla %r7,2 # *4 sysc_nr_ok: mvc SP_ARGS(4,%r15),SP_R7(%r15) sysc_do_restart: l %r8,BASED(.Lsysc_table) tm __TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT) l %r8,0(%r7,%r8) # get system call addr. - bnz BASED(sysc_tracesys) - basr %r14,%r8 # call sys_xxxx - st %r2,SP_R2(%r15) # store return value (change R2 on stack) - # ATTENTION: check sys_execve_glue before - # changing anything here !! + bnz BASED(sysc_tracesys) + basr %r14,%r8 # call sys_xxxx + st %r2,SP_R2(%r15) # store return value (change R2 on stack) + # ATTENTION: check sys_execve_glue before + # changing anything here !! sysc_return: tm SP_PSW+1(%r15),0x01 # returning to user ? @@ -258,14 +258,14 @@ sysc_return: tm __TI_flags+3(%r9),_TIF_WORK_SVC bnz BASED(sysc_work) # there is work to do (signals etc.) sysc_leave: - RESTORE_ALL __LC_RETURN_PSW,1 + RESTORE_ALL __LC_RETURN_PSW,1 # # recheck if there is more work to do # sysc_work_loop: tm __TI_flags+3(%r9),_TIF_WORK_SVC - bz BASED(sysc_leave) # there is no work to do + bz BASED(sysc_leave) # there is no work to do # # One of the work bits is on. Find out which one. # @@ -284,11 +284,11 @@ sysc_work: # # _TIF_NEED_RESCHED is set, call schedule -# -sysc_reschedule: - l %r1,BASED(.Lschedule) - la %r14,BASED(sysc_work_loop) - br %r1 # call scheduler +# +sysc_reschedule: + l %r1,BASED(.Lschedule) + la %r14,BASED(sysc_work_loop) + br %r1 # call scheduler # # _TIF_MCCK_PENDING is set, call handler @@ -301,11 +301,11 @@ sysc_mcck_pending: # # _TIF_SIGPENDING or _TIF_RESTORE_SIGMASK is set, call do_signal # -sysc_sigpending: +sysc_sigpending: ni __TI_flags+3(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP - la %r2,SP_PTREGS(%r15) # load pt_regs - l %r1,BASED(.Ldo_signal) - basr %r14,%r1 # call do_signal + la %r2,SP_PTREGS(%r15) # load pt_regs + l %r1,BASED(.Ldo_signal) + basr %r14,%r1 # call do_signal tm __TI_flags+3(%r9),_TIF_RESTART_SVC bo BASED(sysc_restart) tm __TI_flags+3(%r9),_TIF_SINGLE_STEP @@ -317,11 +317,11 @@ sysc_sigpending: # sysc_restart: ni __TI_flags+3(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC - l %r7,SP_R2(%r15) # load new svc number + l %r7,SP_R2(%r15) # load new svc number sla %r7,2 mvc SP_R2(4,%r15),SP_ORIG_R2(%r15) # restore first argument - lm %r2,%r6,SP_R2(%r15) # load svc arguments - b BASED(sysc_do_restart) # restart svc + lm %r2,%r6,SP_R2(%r15) # load svc arguments + b BASED(sysc_do_restart) # restart svc # # _TIF_SINGLE_STEP is set, call do_single_step @@ -338,8 +338,8 @@ sysc_singlestep: # call trace before and after sys_call # sysc_tracesys: - l %r1,BASED(.Ltrace) - la %r2,SP_PTREGS(%r15) # load pt_regs + l %r1,BASED(.Ltrace) + la %r2,SP_PTREGS(%r15) # load pt_regs la %r3,0 srl %r7,2 st %r7,SP_R2(%r15) @@ -347,19 +347,19 @@ sysc_tracesys: clc SP_R2(4,%r15),BASED(.Lnr_syscalls) bnl BASED(sysc_tracenogo) l %r8,BASED(.Lsysc_table) - l %r7,SP_R2(%r15) # strace might have changed the - sll %r7,2 # system call + l %r7,SP_R2(%r15) # strace might have changed the + sll %r7,2 # system call l %r8,0(%r7,%r8) sysc_tracego: lm %r3,%r6,SP_R3(%r15) l %r2,SP_ORIG_R2(%r15) - basr %r14,%r8 # call sys_xxx - st %r2,SP_R2(%r15) # store return value + basr %r14,%r8 # call sys_xxx + st %r2,SP_R2(%r15) # store return value sysc_tracenogo: tm __TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT) - bz BASED(sysc_return) + bz BASED(sysc_return) l %r1,BASED(.Ltrace) - la %r2,SP_PTREGS(%r15) # load pt_regs + la %r2,SP_PTREGS(%r15) # load pt_regs la %r3,1 la %r14,BASED(sysc_return) br %r1 @@ -367,17 +367,17 @@ sysc_tracenogo: # # a new process exits the kernel with ret_from_fork # - .globl ret_from_fork + .globl ret_from_fork ret_from_fork: l %r13,__LC_SVC_NEW_PSW+4 l %r9,__LC_THREAD_INFO # load pointer to thread_info struct tm SP_PSW+1(%r15),0x01 # forking a kernel thread ? bo BASED(0f) st %r15,SP_R15(%r15) # store stack pointer for new kthread -0: l %r1,BASED(.Lschedtail) - basr %r14,%r1 +0: l %r1,BASED(.Lschedtail) + basr %r14,%r1 TRACE_IRQS_ON - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + stosm __SF_EMPTY(%r15),0x03 # reenable interrupts b BASED(sysc_return) # @@ -386,52 +386,51 @@ ret_from_fork: # but are called with different parameter. # return-address is set up above # -sys_clone_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - l %r1,BASED(.Lclone) - br %r1 # branch to sys_clone - -sys_fork_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - l %r1,BASED(.Lfork) - br %r1 # branch to sys_fork - -sys_vfork_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - l %r1,BASED(.Lvfork) - br %r1 # branch to sys_vfork - -sys_execve_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - l %r1,BASED(.Lexecve) - lr %r12,%r14 # save return address - basr %r14,%r1 # call sys_execve - ltr %r2,%r2 # check if execve failed - bnz 0(%r12) # it did fail -> store result in gpr2 - b 4(%r12) # SKIP ST 2,SP_R2(15) after BASR 14,8 - # in system_call/sysc_tracesys - -sys_sigreturn_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs as parameter - l %r1,BASED(.Lsigreturn) - br %r1 # branch to sys_sigreturn - -sys_rt_sigreturn_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs as parameter - l %r1,BASED(.Lrt_sigreturn) - br %r1 # branch to sys_sigreturn +sys_clone_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + l %r1,BASED(.Lclone) + br %r1 # branch to sys_clone -sys_sigaltstack_glue: - la %r4,SP_PTREGS(%r15) # load pt_regs as parameter - l %r1,BASED(.Lsigaltstack) - br %r1 # branch to sys_sigreturn +sys_fork_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + l %r1,BASED(.Lfork) + br %r1 # branch to sys_fork +sys_vfork_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + l %r1,BASED(.Lvfork) + br %r1 # branch to sys_vfork + +sys_execve_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + l %r1,BASED(.Lexecve) + lr %r12,%r14 # save return address + basr %r14,%r1 # call sys_execve + ltr %r2,%r2 # check if execve failed + bnz 0(%r12) # it did fail -> store result in gpr2 + b 4(%r12) # SKIP ST 2,SP_R2(15) after BASR 14,8 + # in system_call/sysc_tracesys + +sys_sigreturn_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs as parameter + l %r1,BASED(.Lsigreturn) + br %r1 # branch to sys_sigreturn + +sys_rt_sigreturn_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs as parameter + l %r1,BASED(.Lrt_sigreturn) + br %r1 # branch to sys_sigreturn + +sys_sigaltstack_glue: + la %r4,SP_PTREGS(%r15) # load pt_regs as parameter + l %r1,BASED(.Lsigaltstack) + br %r1 # branch to sys_sigreturn /* * Program check handler routine */ - .globl pgm_check_handler + .globl pgm_check_handler pgm_check_handler: /* * First we need to check for a special case: @@ -448,8 +447,8 @@ pgm_check_handler: */ STORE_TIMER __LC_SYNC_ENTER_TIMER SAVE_ALL_BASE __LC_SAVE_AREA - tm __LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception - bnz BASED(pgm_per) # got per exception -> special case + tm __LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception + bnz BASED(pgm_per) # got per exception -> special case SAVE_ALL_SYNC __LC_PGM_OLD_PSW,__LC_SAVE_AREA CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA #ifdef CONFIG_VIRT_CPU_ACCOUNTING @@ -461,29 +460,29 @@ pgm_check_handler: pgm_no_vtime: #endif l %r9,__LC_THREAD_INFO # load pointer to thread_info struct - l %r3,__LC_PGM_ILC # load program interruption code + l %r3,__LC_PGM_ILC # load program interruption code la %r8,0x7f nr %r8,%r3 pgm_do_call: - l %r7,BASED(.Ljump_table) - sll %r8,2 - l %r7,0(%r8,%r7) # load address of handler routine - la %r2,SP_PTREGS(%r15) # address of register-save area - la %r14,BASED(sysc_return) - br %r7 # branch to interrupt-handler + l %r7,BASED(.Ljump_table) + sll %r8,2 + l %r7,0(%r8,%r7) # load address of handler routine + la %r2,SP_PTREGS(%r15) # address of register-save area + la %r14,BASED(sysc_return) + br %r7 # branch to interrupt-handler # # handle per exception # pgm_per: - tm __LC_PGM_OLD_PSW,0x40 # test if per event recording is on - bnz BASED(pgm_per_std) # ok, normal per event from user space + tm __LC_PGM_OLD_PSW,0x40 # test if per event recording is on + bnz BASED(pgm_per_std) # ok, normal per event from user space # ok its one of the special cases, now we need to find out which one - clc __LC_PGM_OLD_PSW(8),__LC_SVC_NEW_PSW - be BASED(pgm_svcper) + clc __LC_PGM_OLD_PSW(8),__LC_SVC_NEW_PSW + be BASED(pgm_svcper) # no interesting special case, ignore PER event - lm %r12,%r15,__LC_SAVE_AREA - lpsw 0x28 + lm %r12,%r15,__LC_SAVE_AREA + lpsw 0x28 # # Normal per exception @@ -507,10 +506,10 @@ pgm_no_vtime2: oi __TI_flags+3(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP tm SP_PSW+1(%r15),0x01 # kernel per event ? bz BASED(kernel_per) - l %r3,__LC_PGM_ILC # load program interruption code + l %r3,__LC_PGM_ILC # load program interruption code la %r8,0x7f - nr %r8,%r3 # clear per-event-bit and ilc - be BASED(sysc_return) # only per or per+check ? + nr %r8,%r3 # clear per-event-bit and ilc + be BASED(sysc_return) # only per or per+check ? b BASED(pgm_do_call) # @@ -552,7 +551,7 @@ kernel_per: * IO interrupt handler routine */ - .globl io_int_handler + .globl io_int_handler io_int_handler: STORE_TIMER __LC_ASYNC_ENTER_TIMER stck __LC_INT_CLOCK @@ -569,42 +568,42 @@ io_no_vtime: #endif l %r9,__LC_THREAD_INFO # load pointer to thread_info struct TRACE_IRQS_OFF - l %r1,BASED(.Ldo_IRQ) # load address of do_IRQ - la %r2,SP_PTREGS(%r15) # address of register-save area - basr %r14,%r1 # branch to standard irq handler + l %r1,BASED(.Ldo_IRQ) # load address of do_IRQ + la %r2,SP_PTREGS(%r15) # address of register-save area + basr %r14,%r1 # branch to standard irq handler TRACE_IRQS_ON io_return: - tm SP_PSW+1(%r15),0x01 # returning to user ? + tm SP_PSW+1(%r15),0x01 # returning to user ? #ifdef CONFIG_PREEMPT - bno BASED(io_preempt) # no -> check for preemptive scheduling + bno BASED(io_preempt) # no -> check for preemptive scheduling #else - bno BASED(io_leave) # no-> skip resched & signal + bno BASED(io_leave) # no-> skip resched & signal #endif tm __TI_flags+3(%r9),_TIF_WORK_INT - bnz BASED(io_work) # there is work to do (signals etc.) + bnz BASED(io_work) # there is work to do (signals etc.) io_leave: - RESTORE_ALL __LC_RETURN_PSW,0 + RESTORE_ALL __LC_RETURN_PSW,0 io_done: #ifdef CONFIG_PREEMPT io_preempt: icm %r0,15,__TI_precount(%r9) - bnz BASED(io_leave) + bnz BASED(io_leave) l %r1,SP_R15(%r15) s %r1,BASED(.Lc_spsize) mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) - xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain + xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain lr %r15,%r1 io_resume_loop: tm __TI_flags+3(%r9),_TIF_NEED_RESCHED bno BASED(io_leave) - mvc __TI_precount(4,%r9),BASED(.Lc_pactive) - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - l %r1,BASED(.Lschedule) + mvc __TI_precount(4,%r9),BASED(.Lc_pactive) + stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + l %r1,BASED(.Lschedule) basr %r14,%r1 # call schedule - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts - xc __TI_precount(4,%r9),__TI_precount(%r9) + stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts + xc __TI_precount(4,%r9),__TI_precount(%r9) b BASED(io_resume_loop) #endif @@ -615,16 +614,16 @@ io_work: l %r1,__LC_KERNEL_STACK s %r1,BASED(.Lc_spsize) mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) - xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain + xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain lr %r15,%r1 # # One of the work bits is on. Find out which one. # Checked are: _TIF_SIGPENDING, _TIF_RESTORE_SIGMASK, _TIF_NEED_RESCHED -# and _TIF_MCCK_PENDING +# and _TIF_MCCK_PENDING # io_work_loop: tm __TI_flags+3(%r9),_TIF_MCCK_PENDING - bo BASED(io_mcck_pending) + bo BASED(io_mcck_pending) tm __TI_flags+3(%r9),_TIF_NEED_RESCHED bo BASED(io_reschedule) tm __TI_flags+3(%r9),(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK) @@ -637,36 +636,36 @@ io_work_loop: io_mcck_pending: l %r1,BASED(.Ls390_handle_mcck) la %r14,BASED(io_work_loop) - br %r1 # TIF bit will be cleared by handler + br %r1 # TIF bit will be cleared by handler # # _TIF_NEED_RESCHED is set, call schedule -# -io_reschedule: - l %r1,BASED(.Lschedule) - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - basr %r14,%r1 # call scheduler - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts +# +io_reschedule: + l %r1,BASED(.Lschedule) + stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + basr %r14,%r1 # call scheduler + stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts tm __TI_flags+3(%r9),_TIF_WORK_INT - bz BASED(io_leave) # there is no work to do + bz BASED(io_leave) # there is no work to do b BASED(io_work_loop) # # _TIF_SIGPENDING or _TIF_RESTORE_SIGMASK is set, call do_signal # -io_sigpending: - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - la %r2,SP_PTREGS(%r15) # load pt_regs - l %r1,BASED(.Ldo_signal) - basr %r14,%r1 # call do_signal - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts +io_sigpending: + stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + la %r2,SP_PTREGS(%r15) # load pt_regs + l %r1,BASED(.Ldo_signal) + basr %r14,%r1 # call do_signal + stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts b BASED(io_work_loop) /* * External interrupt handler routine */ - .globl ext_int_handler + .globl ext_int_handler ext_int_handler: STORE_TIMER __LC_ASYNC_ENTER_TIMER stck __LC_INT_CLOCK @@ -683,8 +682,8 @@ ext_no_vtime: #endif l %r9,__LC_THREAD_INFO # load pointer to thread_info struct TRACE_IRQS_OFF - la %r2,SP_PTREGS(%r15) # address of register-save area - lh %r3,__LC_EXT_INT_CODE # get interruption code + la %r2,SP_PTREGS(%r15) # address of register-save area + lh %r3,__LC_EXT_INT_CODE # get interruption code l %r1,BASED(.Ldo_extint) basr %r14,%r1 TRACE_IRQS_ON @@ -696,13 +695,13 @@ __critical_end: * Machine check handler routines */ - .globl mcck_int_handler + .globl mcck_int_handler mcck_int_handler: spt __LC_CPU_TIMER_SAVE_AREA # revalidate cpu timer lm %r0,%r15,__LC_GPREGS_SAVE_AREA # revalidate gprs SAVE_ALL_BASE __LC_SAVE_AREA+32 la %r12,__LC_MCK_OLD_PSW - tm __LC_MCCK_CODE,0x80 # system damage? + tm __LC_MCCK_CODE,0x80 # system damage? bo BASED(mcck_int_main) # yes -> rest of mcck code invalid #ifdef CONFIG_VIRT_CPU_ACCOUNTING mvc __LC_SAVE_AREA+52(8),__LC_ASYNC_ENTER_TIMER @@ -741,7 +740,7 @@ mcck_int_main: l %r15,__LC_PANIC_STACK # load panic stack 0: CREATE_STACK_FRAME __LC_MCK_OLD_PSW,__LC_SAVE_AREA+32 #ifdef CONFIG_VIRT_CPU_ACCOUNTING - tm __LC_MCCK_CODE+2,0x08 # mwp of old psw valid? + tm __LC_MCCK_CODE+2,0x08 # mwp of old psw valid? bno BASED(mcck_no_vtime) # no -> skip cleanup critical tm SP_PSW+1(%r15),0x01 # interrupting from user ? bz BASED(mcck_no_vtime) @@ -752,14 +751,14 @@ mcck_no_vtime: #endif l %r9,__LC_THREAD_INFO # load pointer to thread_info struct la %r2,SP_PTREGS(%r15) # load pt_regs - l %r1,BASED(.Ls390_mcck) - basr %r14,%r1 # call machine check handler - tm SP_PSW+1(%r15),0x01 # returning to user ? + l %r1,BASED(.Ls390_mcck) + basr %r14,%r1 # call machine check handler + tm SP_PSW+1(%r15),0x01 # returning to user ? bno BASED(mcck_return) - l %r1,__LC_KERNEL_STACK # switch to kernel stack + l %r1,__LC_KERNEL_STACK # switch to kernel stack s %r1,BASED(.Lc_spsize) mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) - xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain + xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain lr %r15,%r1 stosm __SF_EMPTY(%r15),0x04 # turn dat on tm __TI_flags+3(%r9),_TIF_MCCK_PENDING @@ -783,36 +782,36 @@ mcck_return: lm %r0,%r15,SP_R0(%r15) # load gprs 0-15 lpsw __LC_RETURN_MCCK_PSW # back to caller - RESTORE_ALL __LC_RETURN_MCCK_PSW,0 + RESTORE_ALL __LC_RETURN_MCCK_PSW,0 #ifdef CONFIG_SMP /* * Restart interruption handler, kick starter for additional CPUs */ - .globl restart_int_handler + .globl restart_int_handler restart_int_handler: - l %r15,__LC_SAVE_AREA+60 # load ksp - lctl %c0,%c15,__LC_CREGS_SAVE_AREA # get new ctl regs - lam %a0,%a15,__LC_AREGS_SAVE_AREA - lm %r6,%r15,__SF_GPRS(%r15) # load registers from clone - stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on - basr %r14,0 - l %r14,restart_addr-.(%r14) - br %r14 # branch to start_secondary + l %r15,__LC_SAVE_AREA+60 # load ksp + lctl %c0,%c15,__LC_CREGS_SAVE_AREA # get new ctl regs + lam %a0,%a15,__LC_AREGS_SAVE_AREA + lm %r6,%r15,__SF_GPRS(%r15) # load registers from clone + stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on + basr %r14,0 + l %r14,restart_addr-.(%r14) + br %r14 # branch to start_secondary restart_addr: - .long start_secondary + .long start_secondary #else /* * If we do not run with SMP enabled, let the new CPU crash ... */ - .globl restart_int_handler + .globl restart_int_handler restart_int_handler: - basr %r1,0 + basr %r1,0 restart_base: - lpsw restart_crash-restart_base(%r1) - .align 8 + lpsw restart_crash-restart_base(%r1) + .align 8 restart_crash: - .long 0x000a0000,0x00000000 + .long 0x000a0000,0x00000000 restart_go: #endif @@ -834,11 +833,11 @@ stack_overflow: be BASED(0f) la %r1,__LC_SAVE_AREA+16 0: mvc SP_R12(16,%r15),0(%r1) # move %r12-%r15 to stack - xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear back chain + xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear back chain l %r1,BASED(1f) # branch to kernel_stack_overflow - la %r2,SP_PTREGS(%r15) # load pt_regs + la %r2,SP_PTREGS(%r15) # load pt_regs br %r1 -1: .long kernel_stack_overflow +1: .long kernel_stack_overflow #endif cleanup_table_system_call: @@ -940,10 +939,10 @@ cleanup_novtime: cleanup_system_call_insn: .long sysc_saveall + 0x80000000 #ifdef CONFIG_VIRT_CPU_ACCOUNTING - .long system_call + 0x80000000 - .long sysc_vtime + 0x80000000 - .long sysc_stime + 0x80000000 - .long sysc_update + 0x80000000 + .long system_call + 0x80000000 + .long sysc_vtime + 0x80000000 + .long sysc_stime + 0x80000000 + .long sysc_update + 0x80000000 #endif cleanup_sysc_return: @@ -1009,57 +1008,57 @@ cleanup_io_leave_insn: /* * Integer constants */ - .align 4 -.Lc_spsize: .long SP_SIZE -.Lc_overhead: .long STACK_FRAME_OVERHEAD -.Lc_pactive: .long PREEMPT_ACTIVE -.Lnr_syscalls: .long NR_syscalls -.L0x018: .short 0x018 -.L0x020: .short 0x020 -.L0x028: .short 0x028 -.L0x030: .short 0x030 -.L0x038: .short 0x038 -.Lc_1: .long 1 + .align 4 +.Lc_spsize: .long SP_SIZE +.Lc_overhead: .long STACK_FRAME_OVERHEAD +.Lc_pactive: .long PREEMPT_ACTIVE +.Lnr_syscalls: .long NR_syscalls +.L0x018: .short 0x018 +.L0x020: .short 0x020 +.L0x028: .short 0x028 +.L0x030: .short 0x030 +.L0x038: .short 0x038 +.Lc_1: .long 1 /* * Symbol constants */ -.Ls390_mcck: .long s390_do_machine_check +.Ls390_mcck: .long s390_do_machine_check .Ls390_handle_mcck: - .long s390_handle_mcck -.Lmck_old_psw: .long __LC_MCK_OLD_PSW -.Ldo_IRQ: .long do_IRQ -.Ldo_extint: .long do_extint -.Ldo_signal: .long do_signal -.Lhandle_per: .long do_single_step -.Ljump_table: .long pgm_check_table -.Lschedule: .long schedule -.Lclone: .long sys_clone -.Lexecve: .long sys_execve -.Lfork: .long sys_fork -.Lrt_sigreturn:.long sys_rt_sigreturn + .long s390_handle_mcck +.Lmck_old_psw: .long __LC_MCK_OLD_PSW +.Ldo_IRQ: .long do_IRQ +.Ldo_extint: .long do_extint +.Ldo_signal: .long do_signal +.Lhandle_per: .long do_single_step +.Ljump_table: .long pgm_check_table +.Lschedule: .long schedule +.Lclone: .long sys_clone +.Lexecve: .long sys_execve +.Lfork: .long sys_fork +.Lrt_sigreturn: .long sys_rt_sigreturn .Lrt_sigsuspend: - .long sys_rt_sigsuspend -.Lsigreturn: .long sys_sigreturn -.Lsigsuspend: .long sys_sigsuspend -.Lsigaltstack: .long sys_sigaltstack -.Ltrace: .long syscall_trace -.Lvfork: .long sys_vfork -.Lschedtail: .long schedule_tail -.Lsysc_table: .long sys_call_table + .long sys_rt_sigsuspend +.Lsigreturn: .long sys_sigreturn +.Lsigsuspend: .long sys_sigsuspend +.Lsigaltstack: .long sys_sigaltstack +.Ltrace: .long syscall_trace +.Lvfork: .long sys_vfork +.Lschedtail: .long schedule_tail +.Lsysc_table: .long sys_call_table #ifdef CONFIG_TRACE_IRQFLAGS -.Ltrace_irq_on:.long trace_hardirqs_on +.Ltrace_irq_on: .long trace_hardirqs_on .Ltrace_irq_off: - .long trace_hardirqs_off + .long trace_hardirqs_off #endif .Lcritical_start: - .long __critical_start + 0x80000000 + .long __critical_start + 0x80000000 .Lcritical_end: - .long __critical_end + 0x80000000 + .long __critical_end + 0x80000000 .Lcleanup_critical: - .long cleanup_critical + .long cleanup_critical - .section .rodata, "a" + .section .rodata, "a" #define SYSCALL(esa,esame,emu) .long esa sys_call_table: #include "syscalls.S" diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 29bbfbab7332..0f758c329a5d 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -4,8 +4,8 @@ * * Copyright (C) IBM Corp. 1999,2006 * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), - * Hartmut Penner (hp@de.ibm.com), - * Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), + * Hartmut Penner (hp@de.ibm.com), + * Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), * Heiko Carstens <heiko.carstens@de.ibm.com> */ @@ -24,29 +24,29 @@ * Stack layout for the system_call stack entry. * The first few entries are identical to the user_regs_struct. */ -SP_PTREGS = STACK_FRAME_OVERHEAD -SP_ARGS = STACK_FRAME_OVERHEAD + __PT_ARGS -SP_PSW = STACK_FRAME_OVERHEAD + __PT_PSW -SP_R0 = STACK_FRAME_OVERHEAD + __PT_GPRS -SP_R1 = STACK_FRAME_OVERHEAD + __PT_GPRS + 8 -SP_R2 = STACK_FRAME_OVERHEAD + __PT_GPRS + 16 -SP_R3 = STACK_FRAME_OVERHEAD + __PT_GPRS + 24 -SP_R4 = STACK_FRAME_OVERHEAD + __PT_GPRS + 32 -SP_R5 = STACK_FRAME_OVERHEAD + __PT_GPRS + 40 -SP_R6 = STACK_FRAME_OVERHEAD + __PT_GPRS + 48 -SP_R7 = STACK_FRAME_OVERHEAD + __PT_GPRS + 56 -SP_R8 = STACK_FRAME_OVERHEAD + __PT_GPRS + 64 -SP_R9 = STACK_FRAME_OVERHEAD + __PT_GPRS + 72 -SP_R10 = STACK_FRAME_OVERHEAD + __PT_GPRS + 80 -SP_R11 = STACK_FRAME_OVERHEAD + __PT_GPRS + 88 -SP_R12 = STACK_FRAME_OVERHEAD + __PT_GPRS + 96 -SP_R13 = STACK_FRAME_OVERHEAD + __PT_GPRS + 104 -SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 112 -SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 120 -SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2 -SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC -SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP -SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE +SP_PTREGS = STACK_FRAME_OVERHEAD +SP_ARGS = STACK_FRAME_OVERHEAD + __PT_ARGS +SP_PSW = STACK_FRAME_OVERHEAD + __PT_PSW +SP_R0 = STACK_FRAME_OVERHEAD + __PT_GPRS +SP_R1 = STACK_FRAME_OVERHEAD + __PT_GPRS + 8 +SP_R2 = STACK_FRAME_OVERHEAD + __PT_GPRS + 16 +SP_R3 = STACK_FRAME_OVERHEAD + __PT_GPRS + 24 +SP_R4 = STACK_FRAME_OVERHEAD + __PT_GPRS + 32 +SP_R5 = STACK_FRAME_OVERHEAD + __PT_GPRS + 40 +SP_R6 = STACK_FRAME_OVERHEAD + __PT_GPRS + 48 +SP_R7 = STACK_FRAME_OVERHEAD + __PT_GPRS + 56 +SP_R8 = STACK_FRAME_OVERHEAD + __PT_GPRS + 64 +SP_R9 = STACK_FRAME_OVERHEAD + __PT_GPRS + 72 +SP_R10 = STACK_FRAME_OVERHEAD + __PT_GPRS + 80 +SP_R11 = STACK_FRAME_OVERHEAD + __PT_GPRS + 88 +SP_R12 = STACK_FRAME_OVERHEAD + __PT_GPRS + 96 +SP_R13 = STACK_FRAME_OVERHEAD + __PT_GPRS + 104 +SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 112 +SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 120 +SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2 +SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC +SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP +SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER STACK_SIZE = 1 << STACK_SHIFT @@ -71,14 +71,14 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \ #define TRACE_IRQS_OFF #endif - .macro STORE_TIMER lc_offset + .macro STORE_TIMER lc_offset #ifdef CONFIG_VIRT_CPU_ACCOUNTING stpt \lc_offset #endif .endm #ifdef CONFIG_VIRT_CPU_ACCOUNTING - .macro UPDATE_VTIME lc_from,lc_to,lc_sum + .macro UPDATE_VTIME lc_from,lc_to,lc_sum lg %r10,\lc_from slg %r10,\lc_to alg %r10,\lc_sum @@ -94,7 +94,7 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \ * R15 - kernel stack pointer */ - .macro SAVE_ALL_BASE savearea + .macro SAVE_ALL_BASE savearea stmg %r12,%r15,\savearea larl %r13,system_call .endm @@ -139,8 +139,8 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \ .endm .macro CREATE_STACK_FRAME psworg,savearea - aghi %r15,-SP_SIZE # make room for registers & psw - mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack + aghi %r15,-SP_SIZE # make room for registers & psw + mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack la %r12,\psworg stg %r2,SP_ORIG_R2(%r15) # store original content of gpr 2 icm %r12,12,__LC_SVC_ILC @@ -149,7 +149,7 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \ mvc SP_R12(32,%r15),\savearea # move %r12-%r15 to stack la %r12,0 stg %r12,__SF_BACKCHAIN(%r15) - .endm + .endm .macro RESTORE_ALL psworg,sync mvc \psworg(16),SP_PSW(%r15) # move user PSW to lowcore @@ -168,29 +168,29 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \ * Returns: * gpr2 = prev */ - .globl __switch_to + .globl __switch_to __switch_to: tm __THREAD_per+4(%r3),0xe8 # is the new process using per ? jz __switch_to_noper # if not we're fine - stctg %c9,%c11,__SF_EMPTY(%r15)# We are using per stuff - clc __THREAD_per(24,%r3),__SF_EMPTY(%r15) - je __switch_to_noper # we got away without bashing TLB's - lctlg %c9,%c11,__THREAD_per(%r3) # Nope we didn't + stctg %c9,%c11,__SF_EMPTY(%r15)# We are using per stuff + clc __THREAD_per(24,%r3),__SF_EMPTY(%r15) + je __switch_to_noper # we got away without bashing TLB's + lctlg %c9,%c11,__THREAD_per(%r3) # Nope we didn't __switch_to_noper: - lg %r4,__THREAD_info(%r2) # get thread_info of prev + lg %r4,__THREAD_info(%r2) # get thread_info of prev tm __TI_flags+7(%r4),_TIF_MCCK_PENDING # machine check pending? jz __switch_to_no_mcck ni __TI_flags+7(%r4),255-_TIF_MCCK_PENDING # clear flag in prev lg %r4,__THREAD_info(%r3) # get thread_info of next oi __TI_flags+7(%r4),_TIF_MCCK_PENDING # set it in next __switch_to_no_mcck: - stmg %r6,%r15,__SF_GPRS(%r15)# store __switch_to registers of prev task + stmg %r6,%r15,__SF_GPRS(%r15)# store __switch_to registers of prev task stg %r15,__THREAD_ksp(%r2) # store kernel stack to prev->tss.ksp lg %r15,__THREAD_ksp(%r3) # load kernel stack from next->tss.ksp - lmg %r6,%r15,__SF_GPRS(%r15)# load __switch_to registers of next task + lmg %r6,%r15,__SF_GPRS(%r15)# load __switch_to registers of next task stg %r3,__LC_CURRENT # __LC_CURRENT = current task struct lctl %c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4 - lg %r3,__THREAD_info(%r3) # load thread_info from task struct + lg %r3,__THREAD_info(%r3) # load thread_info from task struct stg %r3,__LC_THREAD_INFO aghi %r3,STACK_SIZE stg %r3,__LC_KERNEL_STACK # __LC_KERNEL_STACK = new kernel stack @@ -202,14 +202,14 @@ __critical_start: * are executed with interrupts enabled. */ - .globl system_call + .globl system_call system_call: STORE_TIMER __LC_SYNC_ENTER_TIMER sysc_saveall: SAVE_ALL_BASE __LC_SAVE_AREA SAVE_ALL_SYNC __LC_SVC_OLD_PSW,__LC_SAVE_AREA - CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA - llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore + CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA + llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore #ifdef CONFIG_VIRT_CPU_ACCOUNTING sysc_vtime: tm SP_PSW+1(%r15),0x01 # interrupting from user ? @@ -222,45 +222,45 @@ sysc_update: #endif sysc_do_svc: lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct - slag %r7,%r7,2 # *4 and test for svc 0 + slag %r7,%r7,2 # *4 and test for svc 0 jnz sysc_nr_ok # svc 0: system call number in %r1 cl %r1,BASED(.Lnr_syscalls) jnl sysc_nr_ok - lgfr %r7,%r1 # clear high word in r1 - slag %r7,%r7,2 # svc 0: system call number in %r1 + lgfr %r7,%r1 # clear high word in r1 + slag %r7,%r7,2 # svc 0: system call number in %r1 sysc_nr_ok: mvc SP_ARGS(8,%r15),SP_R7(%r15) sysc_do_restart: - larl %r10,sys_call_table + larl %r10,sys_call_table #ifdef CONFIG_COMPAT tm __TI_flags+5(%r9),(_TIF_31BIT>>16) # running in 31 bit mode ? jno sysc_noemu - larl %r10,sys_call_table_emu # use 31 bit emulation system calls + larl %r10,sys_call_table_emu # use 31 bit emulation system calls sysc_noemu: #endif tm __TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT) - lgf %r8,0(%r7,%r10) # load address of system call routine - jnz sysc_tracesys - basr %r14,%r8 # call sys_xxxx - stg %r2,SP_R2(%r15) # store return value (change R2 on stack) - # ATTENTION: check sys_execve_glue before - # changing anything here !! + lgf %r8,0(%r7,%r10) # load address of system call routine + jnz sysc_tracesys + basr %r14,%r8 # call sys_xxxx + stg %r2,SP_R2(%r15) # store return value (change R2 on stack) + # ATTENTION: check sys_execve_glue before + # changing anything here !! sysc_return: - tm SP_PSW+1(%r15),0x01 # returning to user ? - jno sysc_leave + tm SP_PSW+1(%r15),0x01 # returning to user ? + jno sysc_leave tm __TI_flags+7(%r9),_TIF_WORK_SVC - jnz sysc_work # there is work to do (signals etc.) + jnz sysc_work # there is work to do (signals etc.) sysc_leave: - RESTORE_ALL __LC_RETURN_PSW,1 + RESTORE_ALL __LC_RETURN_PSW,1 # # recheck if there is more work to do # sysc_work_loop: tm __TI_flags+7(%r9),_TIF_WORK_SVC - jz sysc_leave # there is no work to do + jz sysc_leave # there is no work to do # # One of the work bits is on. Find out which one. # @@ -279,25 +279,25 @@ sysc_work: # # _TIF_NEED_RESCHED is set, call schedule -# -sysc_reschedule: - larl %r14,sysc_work_loop - jg schedule # return point is sysc_return +# +sysc_reschedule: + larl %r14,sysc_work_loop + jg schedule # return point is sysc_return # # _TIF_MCCK_PENDING is set, call handler # sysc_mcck_pending: larl %r14,sysc_work_loop - jg s390_handle_mcck # TIF bit will be cleared by handler + jg s390_handle_mcck # TIF bit will be cleared by handler # # _TIF_SIGPENDING or _TIF_RESTORE_SIGMASK is set, call do_signal # -sysc_sigpending: +sysc_sigpending: ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP - la %r2,SP_PTREGS(%r15) # load pt_regs - brasl %r14,do_signal # call do_signal + la %r2,SP_PTREGS(%r15) # load pt_regs + brasl %r14,do_signal # call do_signal tm __TI_flags+7(%r9),_TIF_RESTART_SVC jo sysc_restart tm __TI_flags+7(%r9),_TIF_SINGLE_STEP @@ -309,11 +309,11 @@ sysc_sigpending: # sysc_restart: ni __TI_flags+7(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC - lg %r7,SP_R2(%r15) # load new svc number - slag %r7,%r7,2 # *4 + lg %r7,SP_R2(%r15) # load new svc number + slag %r7,%r7,2 # *4 mvc SP_R2(8,%r15),SP_ORIG_R2(%r15) # restore first argument - lmg %r2,%r6,SP_R2(%r15) # load svc arguments - j sysc_do_restart # restart svc + lmg %r2,%r6,SP_R2(%r15) # load svc arguments + j sysc_do_restart # restart svc # # _TIF_SINGLE_STEP is set, call do_single_step @@ -326,49 +326,48 @@ sysc_singlestep: larl %r14,sysc_return # load adr. of system return jg do_single_step # branch to do_sigtrap - # # call syscall_trace before and after system call # special linkage: %r12 contains the return address for trace_svc # sysc_tracesys: - la %r2,SP_PTREGS(%r15) # load pt_regs + la %r2,SP_PTREGS(%r15) # load pt_regs la %r3,0 srl %r7,2 - stg %r7,SP_R2(%r15) - brasl %r14,syscall_trace + stg %r7,SP_R2(%r15) + brasl %r14,syscall_trace lghi %r0,NR_syscalls clg %r0,SP_R2(%r15) jnh sysc_tracenogo - lg %r7,SP_R2(%r15) # strace might have changed the - sll %r7,2 # system call + lg %r7,SP_R2(%r15) # strace might have changed the + sll %r7,2 # system call lgf %r8,0(%r7,%r10) sysc_tracego: - lmg %r3,%r6,SP_R3(%r15) - lg %r2,SP_ORIG_R2(%r15) - basr %r14,%r8 # call sys_xxx - stg %r2,SP_R2(%r15) # store return value + lmg %r3,%r6,SP_R3(%r15) + lg %r2,SP_ORIG_R2(%r15) + basr %r14,%r8 # call sys_xxx + stg %r2,SP_R2(%r15) # store return value sysc_tracenogo: tm __TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT) - jz sysc_return - la %r2,SP_PTREGS(%r15) # load pt_regs + jz sysc_return + la %r2,SP_PTREGS(%r15) # load pt_regs la %r3,1 - larl %r14,sysc_return # return point is sysc_return + larl %r14,sysc_return # return point is sysc_return jg syscall_trace # # a new process exits the kernel with ret_from_fork # - .globl ret_from_fork + .globl ret_from_fork ret_from_fork: lg %r13,__LC_SVC_NEW_PSW+8 lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct tm SP_PSW+1(%r15),0x01 # forking a kernel thread ? jo 0f stg %r15,SP_R15(%r15) # store stack pointer for new kthread -0: brasl %r14,schedule_tail +0: brasl %r14,schedule_tail TRACE_IRQS_ON - stosm 24(%r15),0x03 # reenable interrupts + stosm 24(%r15),0x03 # reenable interrupts j sysc_return # @@ -377,78 +376,78 @@ ret_from_fork: # but are called with different parameter. # return-address is set up above # -sys_clone_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - jg sys_clone # branch to sys_clone +sys_clone_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + jg sys_clone # branch to sys_clone #ifdef CONFIG_COMPAT -sys32_clone_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - jg sys32_clone # branch to sys32_clone +sys32_clone_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + jg sys32_clone # branch to sys32_clone #endif -sys_fork_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - jg sys_fork # branch to sys_fork - -sys_vfork_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - jg sys_vfork # branch to sys_vfork - -sys_execve_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - lgr %r12,%r14 # save return address - brasl %r14,sys_execve # call sys_execve - ltgr %r2,%r2 # check if execve failed - bnz 0(%r12) # it did fail -> store result in gpr2 - b 6(%r12) # SKIP STG 2,SP_R2(15) in - # system_call/sysc_tracesys +sys_fork_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + jg sys_fork # branch to sys_fork + +sys_vfork_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + jg sys_vfork # branch to sys_vfork + +sys_execve_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + lgr %r12,%r14 # save return address + brasl %r14,sys_execve # call sys_execve + ltgr %r2,%r2 # check if execve failed + bnz 0(%r12) # it did fail -> store result in gpr2 + b 6(%r12) # SKIP STG 2,SP_R2(15) in + # system_call/sysc_tracesys #ifdef CONFIG_COMPAT -sys32_execve_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs - lgr %r12,%r14 # save return address - brasl %r14,sys32_execve # call sys32_execve - ltgr %r2,%r2 # check if execve failed - bnz 0(%r12) # it did fail -> store result in gpr2 - b 6(%r12) # SKIP STG 2,SP_R2(15) in - # system_call/sysc_tracesys +sys32_execve_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs + lgr %r12,%r14 # save return address + brasl %r14,sys32_execve # call sys32_execve + ltgr %r2,%r2 # check if execve failed + bnz 0(%r12) # it did fail -> store result in gpr2 + b 6(%r12) # SKIP STG 2,SP_R2(15) in + # system_call/sysc_tracesys #endif -sys_sigreturn_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs as parameter - jg sys_sigreturn # branch to sys_sigreturn +sys_sigreturn_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs as parameter + jg sys_sigreturn # branch to sys_sigreturn #ifdef CONFIG_COMPAT -sys32_sigreturn_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs as parameter - jg sys32_sigreturn # branch to sys32_sigreturn +sys32_sigreturn_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs as parameter + jg sys32_sigreturn # branch to sys32_sigreturn #endif -sys_rt_sigreturn_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs as parameter - jg sys_rt_sigreturn # branch to sys_sigreturn +sys_rt_sigreturn_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs as parameter + jg sys_rt_sigreturn # branch to sys_sigreturn #ifdef CONFIG_COMPAT -sys32_rt_sigreturn_glue: - la %r2,SP_PTREGS(%r15) # load pt_regs as parameter - jg sys32_rt_sigreturn # branch to sys32_sigreturn +sys32_rt_sigreturn_glue: + la %r2,SP_PTREGS(%r15) # load pt_regs as parameter + jg sys32_rt_sigreturn # branch to sys32_sigreturn #endif sys_sigaltstack_glue: - la %r4,SP_PTREGS(%r15) # load pt_regs as parameter - jg sys_sigaltstack # branch to sys_sigreturn + la %r4,SP_PTREGS(%r15) # load pt_regs as parameter + jg sys_sigaltstack # branch to sys_sigreturn #ifdef CONFIG_COMPAT sys32_sigaltstack_glue: - la %r4,SP_PTREGS(%r15) # load pt_regs as parameter - jg sys32_sigaltstack_wrapper # branch to sys_sigreturn + la %r4,SP_PTREGS(%r15) # load pt_regs as parameter + jg sys32_sigaltstack_wrapper # branch to sys_sigreturn #endif /* * Program check handler routine */ - .globl pgm_check_handler + .globl pgm_check_handler pgm_check_handler: /* * First we need to check for a special case: @@ -465,8 +464,8 @@ pgm_check_handler: */ STORE_TIMER __LC_SYNC_ENTER_TIMER SAVE_ALL_BASE __LC_SAVE_AREA - tm __LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception - jnz pgm_per # got per exception -> special case + tm __LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception + jnz pgm_per # got per exception -> special case SAVE_ALL_SYNC __LC_PGM_OLD_PSW,__LC_SAVE_AREA CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA #ifdef CONFIG_VIRT_CPU_ACCOUNTING @@ -478,29 +477,29 @@ pgm_check_handler: pgm_no_vtime: #endif lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct - lgf %r3,__LC_PGM_ILC # load program interruption code + lgf %r3,__LC_PGM_ILC # load program interruption code lghi %r8,0x7f ngr %r8,%r3 pgm_do_call: - sll %r8,3 - larl %r1,pgm_check_table - lg %r1,0(%r8,%r1) # load address of handler routine - la %r2,SP_PTREGS(%r15) # address of register-save area + sll %r8,3 + larl %r1,pgm_check_table + lg %r1,0(%r8,%r1) # load address of handler routine + la %r2,SP_PTREGS(%r15) # address of register-save area larl %r14,sysc_return - br %r1 # branch to interrupt-handler + br %r1 # branch to interrupt-handler # # handle per exception # pgm_per: - tm __LC_PGM_OLD_PSW,0x40 # test if per event recording is on - jnz pgm_per_std # ok, normal per event from user space + tm __LC_PGM_OLD_PSW,0x40 # test if per event recording is on + jnz pgm_per_std # ok, normal per event from user space # ok its one of the special cases, now we need to find out which one - clc __LC_PGM_OLD_PSW(16),__LC_SVC_NEW_PSW - je pgm_svcper + clc __LC_PGM_OLD_PSW(16),__LC_SVC_NEW_PSW + je pgm_svcper # no interesting special case, ignore PER event lmg %r12,%r15,__LC_SAVE_AREA - lpswe __LC_PGM_OLD_PSW + lpswe __LC_PGM_OLD_PSW # # Normal per exception @@ -524,9 +523,9 @@ pgm_no_vtime2: mvc __THREAD_per+__PER_address(8,%r1),__LC_PER_ADDRESS mvc __THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID oi __TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP - lgf %r3,__LC_PGM_ILC # load program interruption code + lgf %r3,__LC_PGM_ILC # load program interruption code lghi %r8,0x7f - ngr %r8,%r3 # clear per-event-bit and ilc + ngr %r8,%r3 # clear per-event-bit and ilc je sysc_return j pgm_do_call @@ -544,7 +543,7 @@ pgm_svcper: mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER pgm_no_vtime3: #endif - llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore + llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct lg %r1,__TI_task(%r9) mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID @@ -568,7 +567,7 @@ kernel_per: /* * IO interrupt handler routine */ - .globl io_int_handler + .globl io_int_handler io_int_handler: STORE_TIMER __LC_ASYNC_ENTER_TIMER stck __LC_INT_CLOCK @@ -585,42 +584,42 @@ io_no_vtime: #endif lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct TRACE_IRQS_OFF - la %r2,SP_PTREGS(%r15) # address of register-save area - brasl %r14,do_IRQ # call standard irq handler + la %r2,SP_PTREGS(%r15) # address of register-save area + brasl %r14,do_IRQ # call standard irq handler TRACE_IRQS_ON io_return: - tm SP_PSW+1(%r15),0x01 # returning to user ? + tm SP_PSW+1(%r15),0x01 # returning to user ? #ifdef CONFIG_PREEMPT - jno io_preempt # no -> check for preemptive scheduling + jno io_preempt # no -> check for preemptive scheduling #else - jno io_leave # no-> skip resched & signal + jno io_leave # no-> skip resched & signal #endif tm __TI_flags+7(%r9),_TIF_WORK_INT - jnz io_work # there is work to do (signals etc.) + jnz io_work # there is work to do (signals etc.) io_leave: - RESTORE_ALL __LC_RETURN_PSW,0 + RESTORE_ALL __LC_RETURN_PSW,0 io_done: #ifdef CONFIG_PREEMPT io_preempt: - icm %r0,15,__TI_precount(%r9) - jnz io_leave + icm %r0,15,__TI_precount(%r9) + jnz io_leave # switch to kernel stack lg %r1,SP_R15(%r15) aghi %r1,-SP_SIZE mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) - xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain + xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain lgr %r15,%r1 io_resume_loop: tm __TI_flags+7(%r9),_TIF_NEED_RESCHED jno io_leave - larl %r1,.Lc_pactive - mvc __TI_precount(4,%r9),0(%r1) - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - brasl %r14,schedule # call schedule - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts - xc __TI_precount(4,%r9),__TI_precount(%r9) + larl %r1,.Lc_pactive + mvc __TI_precount(4,%r9),0(%r1) + stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + brasl %r14,schedule # call schedule + stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts + xc __TI_precount(4,%r9),__TI_precount(%r9) j io_resume_loop #endif @@ -631,7 +630,7 @@ io_work: lg %r1,__LC_KERNEL_STACK aghi %r1,-SP_SIZE mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) - xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain + xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain lgr %r15,%r1 # # One of the work bits is on. Find out which one. @@ -656,11 +655,11 @@ io_mcck_pending: # # _TIF_NEED_RESCHED is set, call schedule -# -io_reschedule: - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - brasl %r14,schedule # call scheduler - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts +# +io_reschedule: + stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + brasl %r14,schedule # call scheduler + stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts tm __TI_flags+7(%r9),_TIF_WORK_INT jz io_leave # there is no work to do j io_work_loop @@ -668,17 +667,17 @@ io_reschedule: # # _TIF_SIGPENDING or _TIF_RESTORE_SIGMASK is set, call do_signal # -io_sigpending: - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - la %r2,SP_PTREGS(%r15) # load pt_regs +io_sigpending: + stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + la %r2,SP_PTREGS(%r15) # load pt_regs brasl %r14,do_signal # call do_signal - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts + stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts j io_work_loop /* * External interrupt handler routine */ - .globl ext_int_handler + .globl ext_int_handler ext_int_handler: STORE_TIMER __LC_ASYNC_ENTER_TIMER stck __LC_INT_CLOCK @@ -695,9 +694,9 @@ ext_no_vtime: #endif lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct TRACE_IRQS_OFF - la %r2,SP_PTREGS(%r15) # address of register-save area - llgh %r3,__LC_EXT_INT_CODE # get interruption code - brasl %r14,do_extint + la %r2,SP_PTREGS(%r15) # address of register-save area + llgh %r3,__LC_EXT_INT_CODE # get interruption code + brasl %r14,do_extint TRACE_IRQS_ON j io_return @@ -706,14 +705,14 @@ __critical_end: /* * Machine check handler routines */ - .globl mcck_int_handler + .globl mcck_int_handler mcck_int_handler: la %r1,4095 # revalidate r1 spt __LC_CPU_TIMER_SAVE_AREA-4095(%r1) # revalidate cpu timer - lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)# revalidate gprs + lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)# revalidate gprs SAVE_ALL_BASE __LC_SAVE_AREA+64 la %r12,__LC_MCK_OLD_PSW - tm __LC_MCCK_CODE,0x80 # system damage? + tm __LC_MCCK_CODE,0x80 # system damage? jo mcck_int_main # yes -> rest of mcck code invalid #ifdef CONFIG_VIRT_CPU_ACCOUNTING la %r14,4095 @@ -737,19 +736,19 @@ mcck_int_handler: #endif tm __LC_MCCK_CODE+2,0x09 # mwp + ia of old psw valid? jno mcck_int_main # no -> skip cleanup critical - tm __LC_MCK_OLD_PSW+1,0x01 # test problem state bit + tm __LC_MCK_OLD_PSW+1,0x01 # test problem state bit jnz mcck_int_main # from user -> load kernel stack clc __LC_MCK_OLD_PSW+8(8),BASED(.Lcritical_end) jhe mcck_int_main - clc __LC_MCK_OLD_PSW+8(8),BASED(.Lcritical_start) + clc __LC_MCK_OLD_PSW+8(8),BASED(.Lcritical_start) jl mcck_int_main - brasl %r14,cleanup_critical + brasl %r14,cleanup_critical mcck_int_main: - lg %r14,__LC_PANIC_STACK # are we already on the panic stack? + lg %r14,__LC_PANIC_STACK # are we already on the panic stack? slgr %r14,%r15 srag %r14,%r14,PAGE_SHIFT jz 0f - lg %r15,__LC_PANIC_STACK # load panic stack + lg %r15,__LC_PANIC_STACK # load panic stack 0: CREATE_STACK_FRAME __LC_MCK_OLD_PSW,__LC_SAVE_AREA+64 #ifdef CONFIG_VIRT_CPU_ACCOUNTING tm __LC_MCCK_CODE+2,0x08 # mwp of old psw valid? @@ -764,7 +763,7 @@ mcck_no_vtime: lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct la %r2,SP_PTREGS(%r15) # load pt_regs brasl %r14,s390_do_machine_check - tm SP_PSW+1(%r15),0x01 # returning to user ? + tm SP_PSW+1(%r15),0x01 # returning to user ? jno mcck_return lg %r1,__LC_KERNEL_STACK # switch to kernel stack aghi %r1,-SP_SIZE @@ -794,28 +793,28 @@ mcck_return: /* * Restart interruption handler, kick starter for additional CPUs */ - .globl restart_int_handler + .globl restart_int_handler restart_int_handler: - lg %r15,__LC_SAVE_AREA+120 # load ksp - lghi %r10,__LC_CREGS_SAVE_AREA - lctlg %c0,%c15,0(%r10) # get new ctl regs - lghi %r10,__LC_AREGS_SAVE_AREA - lam %a0,%a15,0(%r10) - lmg %r6,%r15,__SF_GPRS(%r15) # load registers from clone - stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on - jg start_secondary + lg %r15,__LC_SAVE_AREA+120 # load ksp + lghi %r10,__LC_CREGS_SAVE_AREA + lctlg %c0,%c15,0(%r10) # get new ctl regs + lghi %r10,__LC_AREGS_SAVE_AREA + lam %a0,%a15,0(%r10) + lmg %r6,%r15,__SF_GPRS(%r15) # load registers from clone + stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on + jg start_secondary #else /* * If we do not run with SMP enabled, let the new CPU crash ... */ - .globl restart_int_handler + .globl restart_int_handler restart_int_handler: - basr %r1,0 + basr %r1,0 restart_base: - lpswe restart_crash-restart_base(%r1) - .align 8 + lpswe restart_crash-restart_base(%r1) + .align 8 restart_crash: - .long 0x000a0000,0x00000000,0x00000000,0x00000000 + .long 0x000a0000,0x00000000,0x00000000,0x00000000 restart_go: #endif @@ -836,9 +835,9 @@ stack_overflow: chi %r12,__LC_PGM_OLD_PSW je 0f la %r1,__LC_SAVE_AREA+32 -0: mvc SP_R12(32,%r15),0(%r1) # move %r12-%r15 to stack - xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) # clear back chain - la %r2,SP_PTREGS(%r15) # load pt_regs +0: mvc SP_R12(32,%r15),0(%r1) # move %r12-%r15 to stack + xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) # clear back chain + la %r2,SP_PTREGS(%r15) # load pt_regs jg kernel_stack_overflow #endif @@ -941,10 +940,10 @@ cleanup_novtime: cleanup_system_call_insn: .quad sysc_saveall #ifdef CONFIG_VIRT_CPU_ACCOUNTING - .quad system_call - .quad sysc_vtime - .quad sysc_stime - .quad sysc_update + .quad system_call + .quad sysc_vtime + .quad sysc_stime + .quad sysc_update #endif cleanup_sysc_return: @@ -1010,21 +1009,21 @@ cleanup_io_leave_insn: /* * Integer constants */ - .align 4 + .align 4 .Lconst: -.Lc_pactive: .long PREEMPT_ACTIVE -.Lnr_syscalls: .long NR_syscalls -.L0x0130: .short 0x130 -.L0x0140: .short 0x140 -.L0x0150: .short 0x150 -.L0x0160: .short 0x160 -.L0x0170: .short 0x170 +.Lc_pactive: .long PREEMPT_ACTIVE +.Lnr_syscalls: .long NR_syscalls +.L0x0130: .short 0x130 +.L0x0140: .short 0x140 +.L0x0150: .short 0x150 +.L0x0160: .short 0x160 +.L0x0170: .short 0x170 .Lcritical_start: - .quad __critical_start + .quad __critical_start .Lcritical_end: - .quad __critical_end + .quad __critical_end - .section .rodata, "a" + .section .rodata, "a" #define SYSCALL(esa,esame,emu) .long esame sys_call_table: #include "syscalls.S" diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 0f1db268a8a9..0cf59bb7a857 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -36,449 +36,449 @@ #endif #ifndef CONFIG_IPL - .org 0 - .long 0x00080000,0x80000000+startup # Just a restart PSW + .org 0 + .long 0x00080000,0x80000000+startup # Just a restart PSW #else #ifdef CONFIG_IPL_TAPE #define IPL_BS 1024 - .org 0 - .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded - .long 0x27000000,0x60000001 # by ipl to addresses 0-23. - .long 0x02000000,0x20000000+IPL_BS # (a PSW and two CCWs). - .long 0x00000000,0x00000000 # external old psw - .long 0x00000000,0x00000000 # svc old psw - .long 0x00000000,0x00000000 # program check old psw - .long 0x00000000,0x00000000 # machine check old psw - .long 0x00000000,0x00000000 # io old psw - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x000a0000,0x00000058 # external new psw - .long 0x000a0000,0x00000060 # svc new psw - .long 0x000a0000,0x00000068 # program check new psw - .long 0x000a0000,0x00000070 # machine check new psw - .long 0x00080000,0x80000000+.Lioint # io new psw + .org 0 + .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded + .long 0x27000000,0x60000001 # by ipl to addresses 0-23. + .long 0x02000000,0x20000000+IPL_BS # (a PSW and two CCWs). + .long 0x00000000,0x00000000 # external old psw + .long 0x00000000,0x00000000 # svc old psw + .long 0x00000000,0x00000000 # program check old psw + .long 0x00000000,0x00000000 # machine check old psw + .long 0x00000000,0x00000000 # io old psw + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x000a0000,0x00000058 # external new psw + .long 0x000a0000,0x00000060 # svc new psw + .long 0x000a0000,0x00000068 # program check new psw + .long 0x000a0000,0x00000070 # machine check new psw + .long 0x00080000,0x80000000+.Lioint # io new psw - .org 0x100 + .org 0x100 # # subroutine for loading from tape -# Paramters: +# Paramters: # R1 = device number # R2 = load address -.Lloader: - st %r14,.Lldret - la %r3,.Lorbread # r3 = address of orb - la %r5,.Lirb # r5 = address of irb - st %r2,.Lccwread+4 # initialize CCW data addresses - lctl %c6,%c6,.Lcr6 - slr %r2,%r2 +.Lloader: + st %r14,.Lldret + la %r3,.Lorbread # r3 = address of orb + la %r5,.Lirb # r5 = address of irb + st %r2,.Lccwread+4 # initialize CCW data addresses + lctl %c6,%c6,.Lcr6 + slr %r2,%r2 .Lldlp: - la %r6,3 # 3 retries + la %r6,3 # 3 retries .Lssch: - ssch 0(%r3) # load chunk of IPL_BS bytes - bnz .Llderr + ssch 0(%r3) # load chunk of IPL_BS bytes + bnz .Llderr .Lw4end: - bas %r14,.Lwait4io - tm 8(%r5),0x82 # do we have a problem ? - bnz .Lrecov - slr %r7,%r7 - icm %r7,3,10(%r5) # get residual count - lcr %r7,%r7 - la %r7,IPL_BS(%r7) # IPL_BS-residual=#bytes read - ar %r2,%r7 # add to total size - tm 8(%r5),0x01 # found a tape mark ? - bnz .Ldone - l %r0,.Lccwread+4 # update CCW data addresses - ar %r0,%r7 - st %r0,.Lccwread+4 - b .Lldlp + bas %r14,.Lwait4io + tm 8(%r5),0x82 # do we have a problem ? + bnz .Lrecov + slr %r7,%r7 + icm %r7,3,10(%r5) # get residual count + lcr %r7,%r7 + la %r7,IPL_BS(%r7) # IPL_BS-residual=#bytes read + ar %r2,%r7 # add to total size + tm 8(%r5),0x01 # found a tape mark ? + bnz .Ldone + l %r0,.Lccwread+4 # update CCW data addresses + ar %r0,%r7 + st %r0,.Lccwread+4 + b .Lldlp .Ldone: - l %r14,.Lldret - br %r14 # r2 contains the total size + l %r14,.Lldret + br %r14 # r2 contains the total size .Lrecov: - bas %r14,.Lsense # do the sensing - bct %r6,.Lssch # dec. retry count & branch - b .Llderr + bas %r14,.Lsense # do the sensing + bct %r6,.Lssch # dec. retry count & branch + b .Llderr # # Sense subroutine # .Lsense: - st %r14,.Lsnsret - la %r7,.Lorbsense - ssch 0(%r7) # start sense command - bnz .Llderr - bas %r14,.Lwait4io - l %r14,.Lsnsret - tm 8(%r5),0x82 # do we have a problem ? - bnz .Llderr - br %r14 + st %r14,.Lsnsret + la %r7,.Lorbsense + ssch 0(%r7) # start sense command + bnz .Llderr + bas %r14,.Lwait4io + l %r14,.Lsnsret + tm 8(%r5),0x82 # do we have a problem ? + bnz .Llderr + br %r14 # # Wait for interrupt subroutine # .Lwait4io: - lpsw .Lwaitpsw + lpsw .Lwaitpsw .Lioint: - c %r1,0xb8 # compare subchannel number - bne .Lwait4io - tsch 0(%r5) - slr %r0,%r0 - tm 8(%r5),0x82 # do we have a problem ? - bnz .Lwtexit - tm 8(%r5),0x04 # got device end ? - bz .Lwait4io + c %r1,0xb8 # compare subchannel number + bne .Lwait4io + tsch 0(%r5) + slr %r0,%r0 + tm 8(%r5),0x82 # do we have a problem ? + bnz .Lwtexit + tm 8(%r5),0x04 # got device end ? + bz .Lwait4io .Lwtexit: - br %r14 + br %r14 .Llderr: - lpsw .Lcrash + lpsw .Lcrash - .align 8 + .align 8 .Lorbread: - .long 0x00000000,0x0080ff00,.Lccwread - .align 8 + .long 0x00000000,0x0080ff00,.Lccwread + .align 8 .Lorbsense: - .long 0x00000000,0x0080ff00,.Lccwsense - .align 8 + .long 0x00000000,0x0080ff00,.Lccwsense + .align 8 .Lccwread: - .long 0x02200000+IPL_BS,0x00000000 + .long 0x02200000+IPL_BS,0x00000000 .Lccwsense: - .long 0x04200001,0x00000000 + .long 0x04200001,0x00000000 .Lwaitpsw: - .long 0x020a0000,0x80000000+.Lioint + .long 0x020a0000,0x80000000+.Lioint -.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 -.Lcr6: .long 0xff000000 - .align 8 -.Lcrash:.long 0x000a0000,0x00000000 -.Lldret:.long 0 +.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 +.Lcr6: .long 0xff000000 + .align 8 +.Lcrash:.long 0x000a0000,0x00000000 +.Lldret:.long 0 .Lsnsret: .long 0 -#endif /* CONFIG_IPL_TAPE */ +#endif /* CONFIG_IPL_TAPE */ #ifdef CONFIG_IPL_VM -#define IPL_BS 0x730 - .org 0 - .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded - .long 0x02000018,0x60000050 # by ipl to addresses 0-23. - .long 0x02000068,0x60000050 # (a PSW and two CCWs). - .fill 80-24,1,0x40 # bytes 24-79 are discarded !! - .long 0x020000f0,0x60000050 # The next 160 byte are loaded - .long 0x02000140,0x60000050 # to addresses 0x18-0xb7 - .long 0x02000190,0x60000050 # They form the continuation - .long 0x020001e0,0x60000050 # of the CCW program started - .long 0x02000230,0x60000050 # by ipl and load the range - .long 0x02000280,0x60000050 # 0x0f0-0x730 from the image - .long 0x020002d0,0x60000050 # to the range 0x0f0-0x730 - .long 0x02000320,0x60000050 # in memory. At the end of - .long 0x02000370,0x60000050 # the channel program the PSW - .long 0x020003c0,0x60000050 # at location 0 is loaded. - .long 0x02000410,0x60000050 # Initial processing starts - .long 0x02000460,0x60000050 # at 0xf0 = iplstart. - .long 0x020004b0,0x60000050 - .long 0x02000500,0x60000050 - .long 0x02000550,0x60000050 - .long 0x020005a0,0x60000050 - .long 0x020005f0,0x60000050 - .long 0x02000640,0x60000050 - .long 0x02000690,0x60000050 - .long 0x020006e0,0x20000050 +#define IPL_BS 0x730 + .org 0 + .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded + .long 0x02000018,0x60000050 # by ipl to addresses 0-23. + .long 0x02000068,0x60000050 # (a PSW and two CCWs). + .fill 80-24,1,0x40 # bytes 24-79 are discarded !! + .long 0x020000f0,0x60000050 # The next 160 byte are loaded + .long 0x02000140,0x60000050 # to addresses 0x18-0xb7 + .long 0x02000190,0x60000050 # They form the continuation + .long 0x020001e0,0x60000050 # of the CCW program started + .long 0x02000230,0x60000050 # by ipl and load the range + .long 0x02000280,0x60000050 # 0x0f0-0x730 from the image + .long 0x020002d0,0x60000050 # to the range 0x0f0-0x730 + .long 0x02000320,0x60000050 # in memory. At the end of + .long 0x02000370,0x60000050 # the channel program the PSW + .long 0x020003c0,0x60000050 # at location 0 is loaded. + .long 0x02000410,0x60000050 # Initial processing starts + .long 0x02000460,0x60000050 # at 0xf0 = iplstart. + .long 0x020004b0,0x60000050 + .long 0x02000500,0x60000050 + .long 0x02000550,0x60000050 + .long 0x020005a0,0x60000050 + .long 0x020005f0,0x60000050 + .long 0x02000640,0x60000050 + .long 0x02000690,0x60000050 + .long 0x020006e0,0x20000050 - .org 0xf0 + .org 0xf0 # # subroutine for loading cards from the reader # -.Lloader: - la %r3,.Lorb # r2 = address of orb into r2 - la %r5,.Lirb # r4 = address of irb - la %r6,.Lccws - la %r7,20 +.Lloader: + la %r3,.Lorb # r2 = address of orb into r2 + la %r5,.Lirb # r4 = address of irb + la %r6,.Lccws + la %r7,20 .Linit: - st %r2,4(%r6) # initialize CCW data addresses - la %r2,0x50(%r2) - la %r6,8(%r6) - bct 7,.Linit + st %r2,4(%r6) # initialize CCW data addresses + la %r2,0x50(%r2) + la %r6,8(%r6) + bct 7,.Linit - lctl %c6,%c6,.Lcr6 # set IO subclass mask - slr %r2,%r2 + lctl %c6,%c6,.Lcr6 # set IO subclass mask + slr %r2,%r2 .Lldlp: - ssch 0(%r3) # load chunk of 1600 bytes - bnz .Llderr + ssch 0(%r3) # load chunk of 1600 bytes + bnz .Llderr .Lwait4irq: - mvc 0x78(8),.Lnewpsw # set up IO interrupt psw - lpsw .Lwaitpsw + mvc 0x78(8),.Lnewpsw # set up IO interrupt psw + lpsw .Lwaitpsw .Lioint: - c %r1,0xb8 # compare subchannel number - bne .Lwait4irq - tsch 0(%r5) + c %r1,0xb8 # compare subchannel number + bne .Lwait4irq + tsch 0(%r5) - slr %r0,%r0 - ic %r0,8(%r5) # get device status - chi %r0,8 # channel end ? - be .Lcont - chi %r0,12 # channel end + device end ? - be .Lcont + slr %r0,%r0 + ic %r0,8(%r5) # get device status + chi %r0,8 # channel end ? + be .Lcont + chi %r0,12 # channel end + device end ? + be .Lcont - l %r0,4(%r5) - s %r0,8(%r3) # r0/8 = number of ccws executed - mhi %r0,10 # *10 = number of bytes in ccws - lh %r3,10(%r5) # get residual count - sr %r0,%r3 # #ccws*80-residual=#bytes read - ar %r2,%r0 - - br %r14 # r2 contains the total size + l %r0,4(%r5) + s %r0,8(%r3) # r0/8 = number of ccws executed + mhi %r0,10 # *10 = number of bytes in ccws + lh %r3,10(%r5) # get residual count + sr %r0,%r3 # #ccws*80-residual=#bytes read + ar %r2,%r0 + + br %r14 # r2 contains the total size .Lcont: - ahi %r2,0x640 # add 0x640 to total size - la %r6,.Lccws - la %r7,20 + ahi %r2,0x640 # add 0x640 to total size + la %r6,.Lccws + la %r7,20 .Lincr: - l %r0,4(%r6) # update CCW data addresses - ahi %r0,0x640 - st %r0,4(%r6) - ahi %r6,8 - bct 7,.Lincr + l %r0,4(%r6) # update CCW data addresses + ahi %r0,0x640 + st %r0,4(%r6) + ahi %r6,8 + bct 7,.Lincr - b .Lldlp + b .Lldlp .Llderr: - lpsw .Lcrash + lpsw .Lcrash - .align 8 -.Lorb: .long 0x00000000,0x0080ff00,.Lccws -.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 -.Lcr6: .long 0xff000000 -.Lloadp:.long 0,0 - .align 8 -.Lcrash:.long 0x000a0000,0x00000000 + .align 8 +.Lorb: .long 0x00000000,0x0080ff00,.Lccws +.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 +.Lcr6: .long 0xff000000 +.Lloadp:.long 0,0 + .align 8 +.Lcrash:.long 0x000a0000,0x00000000 .Lnewpsw: - .long 0x00080000,0x80000000+.Lioint + .long 0x00080000,0x80000000+.Lioint .Lwaitpsw: - .long 0x020a0000,0x80000000+.Lioint + .long 0x020a0000,0x80000000+.Lioint - .align 8 -.Lccws: .rept 19 - .long 0x02600050,0x00000000 - .endr - .long 0x02200050,0x00000000 -#endif /* CONFIG_IPL_VM */ + .align 8 +.Lccws: .rept 19 + .long 0x02600050,0x00000000 + .endr + .long 0x02200050,0x00000000 +#endif /* CONFIG_IPL_VM */ iplstart: - lh %r1,0xb8 # test if subchannel number - bct %r1,.Lnoload # is valid - l %r1,0xb8 # load ipl subchannel number - la %r2,IPL_BS # load start address - bas %r14,.Lloader # load rest of ipl image - l %r12,.Lparm # pointer to parameter area - st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number + lh %r1,0xb8 # test if subchannel number + bct %r1,.Lnoload # is valid + l %r1,0xb8 # load ipl subchannel number + la %r2,IPL_BS # load start address + bas %r14,.Lloader # load rest of ipl image + l %r12,.Lparm # pointer to parameter area + st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number # # load parameter file from ipl device # .Lagain1: - l %r2,.Linitrd # ramdisk loc. is temp - bas %r14,.Lloader # load parameter file - ltr %r2,%r2 # got anything ? - bz .Lnopf - chi %r2,895 - bnh .Lnotrunc - la %r2,895 + l %r2,.Linitrd # ramdisk loc. is temp + bas %r14,.Lloader # load parameter file + ltr %r2,%r2 # got anything ? + bz .Lnopf + chi %r2,895 + bnh .Lnotrunc + la %r2,895 .Lnotrunc: - l %r4,.Linitrd - clc 0(3,%r4),.L_hdr # if it is HDRx - bz .Lagain1 # skip dataset header - clc 0(3,%r4),.L_eof # if it is EOFx - bz .Lagain1 # skip dateset trailer - la %r5,0(%r4,%r2) - lr %r3,%r2 + l %r4,.Linitrd + clc 0(3,%r4),.L_hdr # if it is HDRx + bz .Lagain1 # skip dataset header + clc 0(3,%r4),.L_eof # if it is EOFx + bz .Lagain1 # skip dateset trailer + la %r5,0(%r4,%r2) + lr %r3,%r2 .Lidebc: - tm 0(%r5),0x80 # high order bit set ? - bo .Ldocv # yes -> convert from EBCDIC - ahi %r5,-1 - bct %r3,.Lidebc - b .Lnocv + tm 0(%r5),0x80 # high order bit set ? + bo .Ldocv # yes -> convert from EBCDIC + ahi %r5,-1 + bct %r3,.Lidebc + b .Lnocv .Ldocv: - l %r3,.Lcvtab - tr 0(256,%r4),0(%r3) # convert parameters to ascii - tr 256(256,%r4),0(%r3) - tr 512(256,%r4),0(%r3) - tr 768(122,%r4),0(%r3) -.Lnocv: la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line - mvc 0(256,%r3),0(%r4) - mvc 256(256,%r3),256(%r4) - mvc 512(256,%r3),512(%r4) - mvc 768(122,%r3),768(%r4) - slr %r0,%r0 - b .Lcntlp + l %r3,.Lcvtab + tr 0(256,%r4),0(%r3) # convert parameters to ascii + tr 256(256,%r4),0(%r3) + tr 512(256,%r4),0(%r3) + tr 768(122,%r4),0(%r3) +.Lnocv: la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line + mvc 0(256,%r3),0(%r4) + mvc 256(256,%r3),256(%r4) + mvc 512(256,%r3),512(%r4) + mvc 768(122,%r3),768(%r4) + slr %r0,%r0 + b .Lcntlp .Ldelspc: - ic %r0,0(%r2,%r3) - chi %r0,0x20 # is it a space ? - be .Lcntlp - ahi %r2,1 - b .Leolp + ic %r0,0(%r2,%r3) + chi %r0,0x20 # is it a space ? + be .Lcntlp + ahi %r2,1 + b .Leolp .Lcntlp: - brct %r2,.Ldelspc + brct %r2,.Ldelspc .Leolp: - slr %r0,%r0 - stc %r0,0(%r2,%r3) # terminate buffer + slr %r0,%r0 + stc %r0,0(%r2,%r3) # terminate buffer .Lnopf: # # load ramdisk from ipl device -# +# .Lagain2: - l %r2,.Linitrd # addr of ramdisk - st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) - bas %r14,.Lloader # load ramdisk - st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of ramdisk - ltr %r2,%r2 - bnz .Lrdcont - st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found + l %r2,.Linitrd # addr of ramdisk + st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) + bas %r14,.Lloader # load ramdisk + st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of rd + ltr %r2,%r2 + bnz .Lrdcont + st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found .Lrdcont: - l %r2,.Linitrd + l %r2,.Linitrd - clc 0(3,%r2),.L_hdr # skip HDRx and EOFx - bz .Lagain2 - clc 0(3,%r2),.L_eof - bz .Lagain2 + clc 0(3,%r2),.L_hdr # skip HDRx and EOFx + bz .Lagain2 + clc 0(3,%r2),.L_eof + bz .Lagain2 #ifdef CONFIG_IPL_VM # # reset files in VM reader # - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running VM ? - bno .Lnoreset - la %r2,.Lreset - lhi %r3,26 - diag %r2,%r3,8 - la %r5,.Lirb - stsch 0(%r5) # check if irq is pending - tm 30(%r5),0x0f # by verifying if any of the - bnz .Lwaitforirq # activity or status control - tm 31(%r5),0xff # bits is set in the schib - bz .Lnoreset + stidp __LC_CPUID # store cpuid + tm __LC_CPUID,0xff # running VM ? + bno .Lnoreset + la %r2,.Lreset + lhi %r3,26 + diag %r2,%r3,8 + la %r5,.Lirb + stsch 0(%r5) # check if irq is pending + tm 30(%r5),0x0f # by verifying if any of the + bnz .Lwaitforirq # activity or status control + tm 31(%r5),0xff # bits is set in the schib + bz .Lnoreset .Lwaitforirq: - mvc 0x78(8),.Lrdrnewpsw # set up IO interrupt psw + mvc 0x78(8),.Lrdrnewpsw # set up IO interrupt psw .Lwaitrdrirq: - lpsw .Lrdrwaitpsw + lpsw .Lrdrwaitpsw .Lrdrint: - c %r1,0xb8 # compare subchannel number - bne .Lwaitrdrirq - la %r5,.Lirb - tsch 0(%r5) + c %r1,0xb8 # compare subchannel number + bne .Lwaitrdrirq + la %r5,.Lirb + tsch 0(%r5) .Lnoreset: - b .Lnoload + b .Lnoload - .align 8 + .align 8 .Lrdrnewpsw: - .long 0x00080000,0x80000000+.Lrdrint + .long 0x00080000,0x80000000+.Lrdrint .Lrdrwaitpsw: - .long 0x020a0000,0x80000000+.Lrdrint + .long 0x020a0000,0x80000000+.Lrdrint #endif # # everything loaded, go for it # .Lnoload: - l %r1,.Lstartup - br %r1 + l %r1,.Lstartup + br %r1 -.Linitrd:.long _end + 0x400000 # default address of initrd +.Linitrd:.long _end + 0x400000 # default address of initrd .Lparm: .long PARMAREA .Lstartup: .long startup -.Lcvtab:.long _ebcasc # ebcdic to ascii table -.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40 - .byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6 - .byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold" -.L_eof: .long 0xc5d6c600 /* C'EOF' */ -.L_hdr: .long 0xc8c4d900 /* C'HDR' */ +.Lcvtab:.long _ebcasc # ebcdic to ascii table +.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40 + .byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6 + .byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold" +.L_eof: .long 0xc5d6c600 /* C'EOF' */ +.L_hdr: .long 0xc8c4d900 /* C'HDR' */ -#endif /* CONFIG_IPL */ +#endif /* CONFIG_IPL */ # # SALIPL loader support. Based on a patch by Rob van der Heij. # This entry point is called directly from the SALIPL loader and # doesn't need a builtin ipl record. # - .org 0x800 - .globl start + .org 0x800 + .globl start start: - stm %r0,%r15,0x07b0 # store registers - basr %r12,%r0 + stm %r0,%r15,0x07b0 # store registers + basr %r12,%r0 .base: - l %r11,.parm - l %r8,.cmd # pointer to command buffer + l %r11,.parm + l %r8,.cmd # pointer to command buffer - ltr %r9,%r9 # do we have SALIPL parameters? - bp .sk8x8 + ltr %r9,%r9 # do we have SALIPL parameters? + bp .sk8x8 - mvc 0(64,%r8),0x00b0 # copy saved registers - xc 64(240-64,%r8),0(%r8) # remainder of buffer - tr 0(64,%r8),.lowcase - b .gotr + mvc 0(64,%r8),0x00b0 # copy saved registers + xc 64(240-64,%r8),0(%r8) # remainder of buffer + tr 0(64,%r8),.lowcase + b .gotr .sk8x8: - mvc 0(240,%r8),0(%r9) # copy iplparms into buffer + mvc 0(240,%r8),0(%r9) # copy iplparms into buffer .gotr: - l %r10,.tbl # EBCDIC to ASCII table - tr 0(240,%r8),0(%r10) - stidp __LC_CPUID # Are we running on VM maybe - cli __LC_CPUID,0xff - bnz .test - .long 0x83300060 # diag 3,0,x'0060' - storage size - b .done + l %r10,.tbl # EBCDIC to ASCII table + tr 0(240,%r8),0(%r10) + stidp __LC_CPUID # Are we running on VM maybe + cli __LC_CPUID,0xff + bnz .test + .long 0x83300060 # diag 3,0,x'0060' - storage size + b .done .test: - mvc 0x68(8),.pgmnw # set up pgm check handler - l %r2,.fourmeg - lr %r3,%r2 - bctr %r3,%r0 # 4M-1 -.loop: iske %r0,%r3 - ar %r3,%r2 + mvc 0x68(8),.pgmnw # set up pgm check handler + l %r2,.fourmeg + lr %r3,%r2 + bctr %r3,%r0 # 4M-1 +.loop: iske %r0,%r3 + ar %r3,%r2 .pgmx: - sr %r3,%r2 - la %r3,1(%r3) + sr %r3,%r2 + la %r3,1(%r3) .done: - l %r1,.memsize - st %r3,ARCH_OFFSET(%r1) - slr %r0,%r0 - st %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11) - st %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11) - j startup # continue with startup -.tbl: .long _ebcasc # translate table -.cmd: .long COMMAND_LINE # address of command line buffer -.parm: .long PARMAREA + l %r1,.memsize + st %r3,ARCH_OFFSET(%r1) + slr %r0,%r0 + st %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11) + st %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11) + j startup # continue with startup +.tbl: .long _ebcasc # translate table +.cmd: .long COMMAND_LINE # address of command line buffer +.parm: .long PARMAREA .memsize: .long memory_size .fourmeg: .long 0x00400000 # 4M -.pgmnw: .long 0x00080000,.pgmx +.pgmnw: .long 0x00080000,.pgmx .lowcase: - .byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07 + .byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07 .byte 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f - .byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17 + .byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17 .byte 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f - .byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27 + .byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27 .byte 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f - .byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37 + .byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37 .byte 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f - .byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47 + .byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47 .byte 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f - .byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57 + .byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57 .byte 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f - .byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67 + .byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67 .byte 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f - .byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77 + .byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77 .byte 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f - .byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87 + .byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87 .byte 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f - .byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97 + .byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97 .byte 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f - .byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 + .byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 .byte 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf - .byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7 + .byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7 .byte 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf - .byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87 # .abcdefg + .byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87 # .abcdefg .byte 0x88,0x89,0xca,0xcb,0xcc,0xcd,0xce,0xcf # hi - .byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 # .jklmnop + .byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 # .jklmnop .byte 0x98,0x99,0xda,0xdb,0xdc,0xdd,0xde,0xdf # qr .byte 0xe0,0xe1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 # ..stuvwx .byte 0xa8,0xa9,0xea,0xeb,0xec,0xed,0xee,0xef # yz - .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7 + .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7 .byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff #ifdef CONFIG_64BIT diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S index 1fa9fa1ca740..1b952a3664e2 100644 --- a/arch/s390/kernel/head31.S +++ b/arch/s390/kernel/head31.S @@ -254,6 +254,16 @@ startup_continue: oi 3(%r12),0x80 # set IDTE flag .Lchkidte: +# +# find out if the diag 0x9c is available +# + mvc __LC_PGM_NEW_PSW(8),.Lpcdiag9c-.LPG1(%r13) + stap __LC_CPUID+4 # store cpu address + lh %r1,__LC_CPUID+4 + diag %r1,0,0x9c # test diag 0x9c + oi 2(%r12),1 # set diag9c flag +.Lchkdiag9c: + lpsw .Lentry-.LPG1(13) # jump to _stext in primary-space, # virtual and never return ... .align 8 @@ -281,6 +291,7 @@ startup_continue: .Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp .Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg .Lpcidte:.long 0x00080000,0x80000000 + .Lchkidte +.Lpcdiag9c:.long 0x00080000,0x80000000 + .Lchkdiag9c .Lmemsize:.long memory_size .Lmchunk:.long memory_chunk .Lmflags:.long machine_flags diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index a8bdd96494c7..b30e5897cdf7 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -15,232 +15,232 @@ # this is called either by the ipl loader or directly by PSW restart # or linload or SALIPL # - .org 0x10000 -startup:basr %r13,0 # get base -.LPG0: l %r13,0f-.LPG0(%r13) - b 0(%r13) -0: .long startup_continue + .org 0x10000 +startup:basr %r13,0 # get base +.LPG0: l %r13,0f-.LPG0(%r13) + b 0(%r13) +0: .long startup_continue # # params at 10400 (setup.h) # - .org PARMAREA - .quad 0 # IPL_DEVICE - .quad 0 # INITRD_START - .quad 0 # INITRD_SIZE + .org PARMAREA + .quad 0 # IPL_DEVICE + .quad 0 # INITRD_START + .quad 0 # INITRD_SIZE - .org COMMAND_LINE - .byte "root=/dev/ram0 ro" - .byte 0 + .org COMMAND_LINE + .byte "root=/dev/ram0 ro" + .byte 0 - .org 0x11000 + .org 0x11000 startup_continue: - basr %r13,0 # get base -.LPG1: sll %r13,1 # remove high order bit - srl %r13,1 - lhi %r1,1 # mode 1 = esame - mvi __LC_AR_MODE_ID,1 # set esame flag - slr %r0,%r0 # set cpuid to zero - sigp %r1,%r0,0x12 # switch to esame mode - sam64 # switch to 64 bit mode - lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers - lg %r12,.Lparmaddr-.LPG1(%r13)# pointer to parameter area - # move IPL device to lowcore - mvc __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12) + basr %r13,0 # get base +.LPG1: sll %r13,1 # remove high order bit + srl %r13,1 + lhi %r1,1 # mode 1 = esame + mvi __LC_AR_MODE_ID,1 # set esame flag + slr %r0,%r0 # set cpuid to zero + sigp %r1,%r0,0x12 # switch to esame mode + sam64 # switch to 64 bit mode + lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers + lg %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area + # move IPL device to lowcore + mvc __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12) # # Setup stack # - larl %r15,init_thread_union - lg %r14,__TI_task(%r15) # cache current in lowcore - stg %r14,__LC_CURRENT - aghi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE - stg %r15,__LC_KERNEL_STACK # set end of kernel stack - aghi %r15,-160 - xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain + larl %r15,init_thread_union + lg %r14,__TI_task(%r15) # cache current in lowcore + stg %r14,__LC_CURRENT + aghi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE + stg %r15,__LC_KERNEL_STACK # set end of kernel stack + aghi %r15,-160 + xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain - brasl %r14,ipl_save_parameters + brasl %r14,ipl_save_parameters # # clear bss memory # - larl %r2,__bss_start # start of bss segment - larl %r3,_end # end of bss segment - sgr %r3,%r2 # length of bss - sgr %r4,%r4 # - sgr %r5,%r5 # set src,length and pad to zero - mvcle %r2,%r4,0 # clear mem - jo .-4 # branch back, if not finish + larl %r2,__bss_start # start of bss segment + larl %r3,_end # end of bss segment + sgr %r3,%r2 # length of bss + sgr %r4,%r4 # + sgr %r5,%r5 # set src,length and pad to zero + mvcle %r2,%r4,0 # clear mem + jo .-4 # branch back, if not finish - l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word + l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word .Lservicecall: - stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts + stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts - stctg %r0,%r0,.Lcr-.LPG1(%r13) # get cr0 - la %r1,0x200 # set bit 22 - og %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 - stg %r1,.Lcr-.LPG1(%r13) - lctlg %r0,%r0,.Lcr-.LPG1(%r13) # load modified cr0 + stctg %r0,%r0,.Lcr-.LPG1(%r13) # get cr0 + la %r1,0x200 # set bit 22 + og %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 + stg %r1,.Lcr-.LPG1(%r13) + lctlg %r0,%r0,.Lcr-.LPG1(%r13) # load modified cr0 - mvc __LC_EXT_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) # set postcall psw - larl %r1,.Lsclph - stg %r1,__LC_EXT_NEW_PSW+8 # set handler + mvc __LC_EXT_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) # set postcall psw + larl %r1,.Lsclph + stg %r1,__LC_EXT_NEW_PSW+8 # set handler - larl %r4,.Lsccb # %r4 is our index for sccb stuff - lgr %r1,%r4 # our sccb - .insn rre,0xb2200000,%r2,%r1 # service call - ipm %r1 - srl %r1,28 # get cc code - xr %r3,%r3 - chi %r1,3 - be .Lfchunk-.LPG1(%r13) # leave - chi %r1,2 - be .Lservicecall-.LPG1(%r13) - lpswe .Lwaitsclp-.LPG1(%r13) + larl %r4,.Lsccb # %r4 is our index for sccb stuff + lgr %r1,%r4 # our sccb + .insn rre,0xb2200000,%r2,%r1 # service call + ipm %r1 + srl %r1,28 # get cc code + xr %r3,%r3 + chi %r1,3 + be .Lfchunk-.LPG1(%r13) # leave + chi %r1,2 + be .Lservicecall-.LPG1(%r13) + lpswe .Lwaitsclp-.LPG1(%r13) .Lsclph: - lh %r1,.Lsccbr-.Lsccb(%r4) - chi %r1,0x10 # 0x0010 is the sucess code - je .Lprocsccb # let's process the sccb - chi %r1,0x1f0 - bne .Lfchunk-.LPG1(%r13) # unhandled error code - c %r2,.Lrcp-.LPG1(%r13) # Did we try Read SCP forced - bne .Lfchunk-.LPG1(%r13) # if no, give up - l %r2,.Lrcp2-.LPG1(%r13) # try with Read SCP - b .Lservicecall-.LPG1(%r13) + lh %r1,.Lsccbr-.Lsccb(%r4) + chi %r1,0x10 # 0x0010 is the sucess code + je .Lprocsccb # let's process the sccb + chi %r1,0x1f0 + bne .Lfchunk-.LPG1(%r13) # unhandled error code + c %r2,.Lrcp-.LPG1(%r13) # Did we try Read SCP forced + bne .Lfchunk-.LPG1(%r13) # if no, give up + l %r2,.Lrcp2-.LPG1(%r13) # try with Read SCP + b .Lservicecall-.LPG1(%r13) .Lprocsccb: - lghi %r1,0 - icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0 - jnz .Lscnd - lg %r1,.Lscpincr2-.Lsccb(%r4) # otherwise use this one + lghi %r1,0 + icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0 + jnz .Lscnd + lg %r1,.Lscpincr2-.Lsccb(%r4) # otherwise use this one .Lscnd: - xr %r3,%r3 # same logic - ic %r3,.Lscpa1-.Lsccb(%r4) - chi %r3,0x00 - jne .Lcompmem - l %r3,.Lscpa2-.Lsccb(%r4) + xr %r3,%r3 # same logic + ic %r3,.Lscpa1-.Lsccb(%r4) + chi %r3,0x00 + jne .Lcompmem + l %r3,.Lscpa2-.Lsccb(%r4) .Lcompmem: - mlgr %r2,%r1 # mem in MB on 128-bit - l %r1,.Lonemb-.LPG1(%r13) - mlgr %r2,%r1 # mem size in bytes in %r3 - b .Lfchunk-.LPG1(%r13) + mlgr %r2,%r1 # mem in MB on 128-bit + l %r1,.Lonemb-.LPG1(%r13) + mlgr %r2,%r1 # mem size in bytes in %r3 + b .Lfchunk-.LPG1(%r13) - .align 4 + .align 4 .Lpmask: - .byte 0 - .align 8 + .byte 0 + .align 8 .Lcr: - .quad 0x00 # place holder for cr0 + .quad 0x00 # place holder for cr0 .Lwaitsclp: - .quad 0x0102000180000000,.Lsclph + .quad 0x0102000180000000,.Lsclph .Lrcp: - .int 0x00120001 # Read SCP forced code + .int 0x00120001 # Read SCP forced code .Lrcp2: - .int 0x00020001 # Read SCP code + .int 0x00020001 # Read SCP code .Lonemb: - .int 0x100000 + .int 0x100000 .Lfchunk: - # set program check new psw mask - mvc __LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) + # set program check new psw mask + mvc __LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) # # find memory chunks. # - lgr %r9,%r3 # end of mem - larl %r1,.Lchkmem # set program check address - stg %r1,__LC_PGM_NEW_PSW+8 - la %r1,1 # test in increments of 128KB - sllg %r1,%r1,17 - larl %r3,memory_chunk - slgr %r4,%r4 # set start of chunk to zero - slgr %r5,%r5 # set end of chunk to zero - slr %r6,%r6 # set access code to zero - la %r10,MEMORY_CHUNKS # number of chunks + lgr %r9,%r3 # end of mem + larl %r1,.Lchkmem # set program check address + stg %r1,__LC_PGM_NEW_PSW+8 + la %r1,1 # test in increments of 128KB + sllg %r1,%r1,17 + larl %r3,memory_chunk + slgr %r4,%r4 # set start of chunk to zero + slgr %r5,%r5 # set end of chunk to zero + slr %r6,%r6 # set access code to zero + la %r10,MEMORY_CHUNKS # number of chunks .Lloop: - tprot 0(%r5),0 # test protection of first byte - ipm %r7 - srl %r7,28 - clr %r6,%r7 # compare cc with last access code - je .Lsame - j .Lchkmem + tprot 0(%r5),0 # test protection of first byte + ipm %r7 + srl %r7,28 + clr %r6,%r7 # compare cc with last access code + je .Lsame + j .Lchkmem .Lsame: - algr %r5,%r1 # add 128KB to end of chunk - # no need to check here, - brc 12,.Lloop # this is the same chunk -.Lchkmem: # > 16EB or tprot got a program check - clgr %r4,%r5 # chunk size > 0? - je .Lchkloop - stg %r4,0(%r3) # store start address of chunk - lgr %r0,%r5 - slgr %r0,%r4 - stg %r0,8(%r3) # store size of chunk - st %r6,20(%r3) # store type of chunk - la %r3,24(%r3) - larl %r8,memory_size - stg %r5,0(%r8) # store memory size - ahi %r10,-1 # update chunk number + algr %r5,%r1 # add 128KB to end of chunk + # no need to check here, + brc 12,.Lloop # this is the same chunk +.Lchkmem: # > 16EB or tprot got a program check + clgr %r4,%r5 # chunk size > 0? + je .Lchkloop + stg %r4,0(%r3) # store start address of chunk + lgr %r0,%r5 + slgr %r0,%r4 + stg %r0,8(%r3) # store size of chunk + st %r6,20(%r3) # store type of chunk + la %r3,24(%r3) + larl %r8,memory_size + stg %r5,0(%r8) # store memory size + ahi %r10,-1 # update chunk number .Lchkloop: - lr %r6,%r7 # set access code to last cc + lr %r6,%r7 # set access code to last cc # we got an exception or we're starting a new # chunk , we must check if we should # still try to find valid memory (if we detected # the amount of available storage), and if we # have chunks left - lghi %r4,1 - sllg %r4,%r4,31 - clgr %r5,%r4 - je .Lhsaskip - xr %r0, %r0 - clgr %r0, %r9 # did we detect memory? - je .Ldonemem # if not, leave - chi %r10, 0 # do we have chunks left? - je .Ldonemem + lghi %r4,1 + sllg %r4,%r4,31 + clgr %r5,%r4 + je .Lhsaskip + xr %r0, %r0 + clgr %r0, %r9 # did we detect memory? + je .Ldonemem # if not, leave + chi %r10, 0 # do we have chunks left? + je .Ldonemem .Lhsaskip: - algr %r5,%r1 # add 128KB to end of chunk - lgr %r4,%r5 # potential new chunk - clgr %r5,%r9 # should we go on? - jl .Lloop -.Ldonemem: + algr %r5,%r1 # add 128KB to end of chunk + lgr %r4,%r5 # potential new chunk + clgr %r5,%r9 # should we go on? + jl .Lloop +.Ldonemem: - larl %r12,machine_flags + larl %r12,machine_flags # # find out if we are running under VM # - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running under VM ? - bno 0f-.LPG1(%r13) - oi 7(%r12),1 # set VM flag -0: lh %r0,__LC_CPUID+4 # get cpu version - chi %r0,0x7490 # running on a P/390 ? - bne 1f-.LPG1(%r13) - oi 7(%r12),4 # set P/390 flag + stidp __LC_CPUID # store cpuid + tm __LC_CPUID,0xff # running under VM ? + bno 0f-.LPG1(%r13) + oi 7(%r12),1 # set VM flag +0: lh %r0,__LC_CPUID+4 # get cpu version + chi %r0,0x7490 # running on a P/390 ? + bne 1f-.LPG1(%r13) + oi 7(%r12),4 # set P/390 flag 1: # # find out if we have the MVPG instruction # - la %r1,0f-.LPG1(%r13) # set program check address - stg %r1,__LC_PGM_NEW_PSW+8 - sgr %r0,%r0 - lghi %r1,0 - lghi %r2,0 - mvpg %r1,%r2 # test MVPG instruction - oi 7(%r12),16 # set MVPG flag + la %r1,0f-.LPG1(%r13) # set program check address + stg %r1,__LC_PGM_NEW_PSW+8 + sgr %r0,%r0 + lghi %r1,0 + lghi %r2,0 + mvpg %r1,%r2 # test MVPG instruction + oi 7(%r12),16 # set MVPG flag 0: # # find out if the diag 0x44 works in 64 bit mode # - la %r1,0f-.LPG1(%r13) # set program check address - stg %r1,__LC_PGM_NEW_PSW+8 - diag 0,0,0x44 # test diag 0x44 - oi 7(%r12),32 # set diag44 flag -0: + la %r1,0f-.LPG1(%r13) # set program check address + stg %r1,__LC_PGM_NEW_PSW+8 + diag 0,0,0x44 # test diag 0x44 + oi 7(%r12),32 # set diag44 flag +0: # # find out if we have the IDTE instruction # - la %r1,0f-.LPG1(%r13) # set program check address - stg %r1,__LC_PGM_NEW_PSW+8 + la %r1,0f-.LPG1(%r13) # set program check address + stg %r1,__LC_PGM_NEW_PSW+8 .long 0xb2b10000 # store facility list tm 0xc8,0x08 # check bit for clearing-by-ASCE bno 0f-.LPG1(%r13) @@ -251,6 +251,17 @@ startup_continue: 0: # +# find out if the diag 0x9c is available +# + la %r1,0f-.LPG1(%r13) # set program check address + stg %r1,__LC_PGM_NEW_PSW+8 + stap __LC_CPUID+4 # store cpu address + lh %r1,__LC_CPUID+4 + diag %r1,0,0x9c # test diag 0x9c + oi 6(%r12),1 # set diag9c flag +0: + +# # find out if we have the MVCOS instruction # la %r1,0f-.LPG1(%r13) # set program check address @@ -263,45 +274,45 @@ startup_continue: oi 6(%r12),2 # set MVCOS flag 1: - lpswe .Lentry-.LPG1(13) # jump to _stext in primary-space, - # virtual and never return ... - .align 16 -.Lentry:.quad 0x0000000180000000,_stext -.Lctl: .quad 0x04b50002 # cr0: various things - .quad 0 # cr1: primary space segment table - .quad .Lduct # cr2: dispatchable unit control table - .quad 0 # cr3: instruction authorization - .quad 0 # cr4: instruction authorization - .quad 0xffffffffffffffff # cr5: primary-aste origin - .quad 0 # cr6: I/O interrupts - .quad 0 # cr7: secondary space segment table - .quad 0 # cr8: access registers translation - .quad 0 # cr9: tracing off - .quad 0 # cr10: tracing off - .quad 0 # cr11: tracing off - .quad 0 # cr12: tracing off - .quad 0 # cr13: home space segment table - .quad 0xc0000000 # cr14: machine check handling off - .quad 0 # cr15: linkage stack operations -.Lduct: .long 0,0,0,0,0,0,0,0 - .long 0,0,0,0,0,0,0,0 -.Lpcmsk:.quad 0x0000000180000000 + lpswe .Lentry-.LPG1(13) # jump to _stext in primary-space, + # virtual and never return ... + .align 16 +.Lentry:.quad 0x0000000180000000,_stext +.Lctl: .quad 0x04b50002 # cr0: various things + .quad 0 # cr1: primary space segment table + .quad .Lduct # cr2: dispatchable unit control table + .quad 0 # cr3: instruction authorization + .quad 0 # cr4: instruction authorization + .quad 0xffffffffffffffff # cr5: primary-aste origin + .quad 0 # cr6: I/O interrupts + .quad 0 # cr7: secondary space segment table + .quad 0 # cr8: access registers translation + .quad 0 # cr9: tracing off + .quad 0 # cr10: tracing off + .quad 0 # cr11: tracing off + .quad 0 # cr12: tracing off + .quad 0 # cr13: home space segment table + .quad 0xc0000000 # cr14: machine check handling off + .quad 0 # cr15: linkage stack operations +.Lduct: .long 0,0,0,0,0,0,0,0 + .long 0,0,0,0,0,0,0,0 +.Lpcmsk:.quad 0x0000000180000000 .L4malign:.quad 0xffffffffffc00000 -.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8 -.Lnop: .long 0x07000700 +.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8 +.Lnop: .long 0x07000700 .Lparmaddr: .quad PARMAREA - .globl ipl_schib + .globl ipl_schib ipl_schib: .rept 13 .long 0 .endr - .globl ipl_flags + .globl ipl_flags ipl_flags: - .long 0 - .globl ipl_devno + .long 0 + .globl ipl_devno ipl_devno: .word 0 @@ -309,47 +320,47 @@ ipl_devno: .globl s390_readinfo_sccb s390_readinfo_sccb: .Lsccb: - .hword 0x1000 # length, one page - .byte 0x00,0x00,0x00 - .byte 0x80 # variable response bit set + .hword 0x1000 # length, one page + .byte 0x00,0x00,0x00 + .byte 0x80 # variable response bit set .Lsccbr: - .hword 0x00 # response code + .hword 0x00 # response code .Lscpincr1: - .hword 0x00 + .hword 0x00 .Lscpa1: - .byte 0x00 - .fill 89,1,0 + .byte 0x00 + .fill 89,1,0 .Lscpa2: - .int 0x00 + .int 0x00 .Lscpincr2: - .quad 0x00 - .fill 3984,1,0 + .quad 0x00 + .fill 3984,1,0 .org 0x13000 #ifdef CONFIG_SHARED_KERNEL - .org 0x100000 + .org 0x100000 #endif - + # # startup-code, running in absolute addressing mode # - .globl _stext -_stext: basr %r13,0 # get base + .globl _stext +_stext: basr %r13,0 # get base .LPG3: # check control registers - stctg %c0,%c15,0(%r15) - oi 6(%r15),0x40 # enable sigp emergency signal - oi 4(%r15),0x10 # switch on low address proctection - lctlg %c0,%c15,0(%r15) + stctg %c0,%c15,0(%r15) + oi 6(%r15),0x40 # enable sigp emergency signal + oi 4(%r15),0x10 # switch on low address proctection + lctlg %c0,%c15,0(%r15) - lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess - brasl %r14,start_kernel # go to C code + lam 0,15,.Laregs-.LPG3(%r13) # load acrs needed by uaccess + brasl %r14,start_kernel # go to C code # # We returned from start_kernel ?!? PANIK # - basr %r13,0 - lpswe .Ldw-.(%r13) # load disabled wait psw + basr %r13,0 + lpswe .Ldw-.(%r13) # load disabled wait psw - .align 8 -.Ldw: .quad 0x0002000180000000,0x0000000000000000 -.Laregs: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + .align 8 +.Ldw: .quad 0x0002000180000000,0x0000000000000000 +.Laregs:.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 6555cc48e28f..1f5e782b3d05 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -120,24 +120,15 @@ static enum shutdown_action on_panic_action = SHUTDOWN_STOP; static int diag308(unsigned long subcode, void *addr) { - register unsigned long _addr asm("0") = (unsigned long)addr; + register unsigned long _addr asm("0") = (unsigned long) addr; register unsigned long _rc asm("1") = 0; - asm volatile ( - " diag %0,%2,0x308\n" - "0: \n" - ".section __ex_table,\"a\"\n" -#ifdef CONFIG_64BIT - " .align 8\n" - " .quad 0b, 0b\n" -#else - " .align 4\n" - " .long 0b, 0b\n" -#endif - ".previous\n" + asm volatile( + " diag %0,%2,0x308\n" + "0:\n" + EX_TABLE(0b,0b) : "+d" (_addr), "+d" (_rc) - : "d" (subcode) : "cc", "memory" ); - + : "d" (subcode) : "cc", "memory"); return _rc; } diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index d3cbfa3005ec..6603fbb41d07 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -45,7 +45,7 @@ #include <asm/irq.h> #include <asm/timer.h> -asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); +asmlinkage void ret_from_fork(void) asm ("ret_from_fork"); /* * Return saved PC of a blocked thread. used in kernel/sched. @@ -177,7 +177,8 @@ void show_regs(struct pt_regs *regs) extern void kernel_thread_starter(void); -__asm__(".align 4\n" +asm( + ".align 4\n" "kernel_thread_starter:\n" " la 2,0(10)\n" " basr 14,9\n" diff --git a/arch/s390/kernel/reipl.S b/arch/s390/kernel/reipl.S index 4562cdbce8eb..0340477f3b08 100644 --- a/arch/s390/kernel/reipl.S +++ b/arch/s390/kernel/reipl.S @@ -32,58 +32,58 @@ do_reipl_asm: basr %r13,0 st %r13, __LC_PSW_SAVE_AREA+4 lctl %c6,%c6,.Lall-.Lpg0(%r13) - lr %r1,%r2 - mvc __LC_PGM_NEW_PSW(8),.Lpcnew-.Lpg0(%r13) - stsch .Lschib-.Lpg0(%r13) - oi .Lschib+5-.Lpg0(%r13),0x84 -.Lecs: xi .Lschib+27-.Lpg0(%r13),0x01 - msch .Lschib-.Lpg0(%r13) - lhi %r0,5 -.Lssch: ssch .Liplorb-.Lpg0(%r13) + lr %r1,%r2 + mvc __LC_PGM_NEW_PSW(8),.Lpcnew-.Lpg0(%r13) + stsch .Lschib-.Lpg0(%r13) + oi .Lschib+5-.Lpg0(%r13),0x84 +.Lecs: xi .Lschib+27-.Lpg0(%r13),0x01 + msch .Lschib-.Lpg0(%r13) + lhi %r0,5 +.Lssch: ssch .Liplorb-.Lpg0(%r13) jz .L001 - brct %r0,.Lssch + brct %r0,.Lssch bas %r14,.Ldisab-.Lpg0(%r13) -.L001: mvc __LC_IO_NEW_PSW(8),.Lionew-.Lpg0(%r13) -.Ltpi: lpsw .Lwaitpsw-.Lpg0(%r13) +.L001: mvc __LC_IO_NEW_PSW(8),.Lionew-.Lpg0(%r13) +.Ltpi: lpsw .Lwaitpsw-.Lpg0(%r13) .Lcont: c %r1,__LC_SUBCHANNEL_ID jnz .Ltpi clc __LC_IO_INT_PARM(4),.Liplorb-.Lpg0(%r13) jnz .Ltpi - tsch .Liplirb-.Lpg0(%r13) + tsch .Liplirb-.Lpg0(%r13) tm .Liplirb+9-.Lpg0(%r13),0xbf - jz .L002 - bas %r14,.Ldisab-.Lpg0(%r13) -.L002: tm .Liplirb+8-.Lpg0(%r13),0xf3 - jz .L003 - bas %r14,.Ldisab-.Lpg0(%r13) + jz .L002 + bas %r14,.Ldisab-.Lpg0(%r13) +.L002: tm .Liplirb+8-.Lpg0(%r13),0xf3 + jz .L003 + bas %r14,.Ldisab-.Lpg0(%r13) .L003: spx .Lnull-.Lpg0(%r13) - st %r1,__LC_SUBCHANNEL_ID - lpsw 0 - sigp 0,0,0(6) -.Ldisab: st %r14,.Ldispsw+4-.Lpg0(%r13) + st %r1,__LC_SUBCHANNEL_ID + lpsw 0 + sigp 0,0,0(6) +.Ldisab: st %r14,.Ldispsw+4-.Lpg0(%r13) lpsw .Ldispsw-.Lpg0(%r13) - .align 8 + .align 8 .Lclkcmp: .quad 0x0000000000000000 .Lall: .long 0xff000000 -.Lnull: .long 0x00000000 +.Lnull: .long 0x00000000 .Lctlsave1: .long 0x00000000 .Lctlsave2: .long 0x00000000 - .align 8 -.Lnewpsw: .long 0x00080000,0x80000000+.Lpg1 -.Lpcnew: .long 0x00080000,0x80000000+.Lecs -.Lionew: .long 0x00080000,0x80000000+.Lcont + .align 8 +.Lnewpsw: .long 0x00080000,0x80000000+.Lpg1 +.Lpcnew: .long 0x00080000,0x80000000+.Lecs +.Lionew: .long 0x00080000,0x80000000+.Lcont .Lwaitpsw: .long 0x020a0000,0x00000000+.Ltpi -.Ldispsw: .long 0x000a0000,0x00000000 -.Liplccws: .long 0x02000000,0x60000018 - .long 0x08000008,0x20000001 +.Ldispsw: .long 0x000a0000,0x00000000 +.Liplccws: .long 0x02000000,0x60000018 + .long 0x08000008,0x20000001 .Liplorb: .long 0x0049504c,0x0040ff80 .long 0x00000000+.Liplccws -.Lschib: .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 +.Lschib: .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 .Liplirb: .long 0x00000000,0x00000000 .long 0x00000000,0x00000000 .long 0x00000000,0x00000000 @@ -92,6 +92,3 @@ do_reipl_asm: basr %r13,0 .long 0x00000000,0x00000000 .long 0x00000000,0x00000000 .long 0x00000000,0x00000000 - - - diff --git a/arch/s390/kernel/reipl64.S b/arch/s390/kernel/reipl64.S index 95bd1e234f63..de7435054f7c 100644 --- a/arch/s390/kernel/reipl64.S +++ b/arch/s390/kernel/reipl64.S @@ -4,7 +4,7 @@ * S390 version * Copyright (C) 2000 IBM Deutschland Entwicklung GmbH, IBM Corporation * Author(s): Holger Smolinski (Holger.Smolinski@de.ibm.com) - Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) + Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) */ #include <asm/lowcore.h> @@ -32,46 +32,46 @@ do_reipl_asm: basr %r13,0 stctg %c0,%c0,.Lregsave-.Lpg0(%r13) ni .Lregsave+4-.Lpg0(%r13),0xef lctlg %c0,%c0,.Lregsave-.Lpg0(%r13) - lgr %r1,%r2 - mvc __LC_PGM_NEW_PSW(16),.Lpcnew-.Lpg0(%r13) - stsch .Lschib-.Lpg0(%r13) - oi .Lschib+5-.Lpg0(%r13),0x84 -.Lecs: xi .Lschib+27-.Lpg0(%r13),0x01 - msch .Lschib-.Lpg0(%r13) - lghi %r0,5 -.Lssch: ssch .Liplorb-.Lpg0(%r13) + lgr %r1,%r2 + mvc __LC_PGM_NEW_PSW(16),.Lpcnew-.Lpg0(%r13) + stsch .Lschib-.Lpg0(%r13) + oi .Lschib+5-.Lpg0(%r13),0x84 +.Lecs: xi .Lschib+27-.Lpg0(%r13),0x01 + msch .Lschib-.Lpg0(%r13) + lghi %r0,5 +.Lssch: ssch .Liplorb-.Lpg0(%r13) jz .L001 - brct %r0,.Lssch + brct %r0,.Lssch bas %r14,.Ldisab-.Lpg0(%r13) -.L001: mvc __LC_IO_NEW_PSW(16),.Lionew-.Lpg0(%r13) -.Ltpi: lpswe .Lwaitpsw-.Lpg0(%r13) +.L001: mvc __LC_IO_NEW_PSW(16),.Lionew-.Lpg0(%r13) +.Ltpi: lpswe .Lwaitpsw-.Lpg0(%r13) .Lcont: c %r1,__LC_SUBCHANNEL_ID jnz .Ltpi clc __LC_IO_INT_PARM(4),.Liplorb-.Lpg0(%r13) jnz .Ltpi - tsch .Liplirb-.Lpg0(%r13) + tsch .Liplirb-.Lpg0(%r13) tm .Liplirb+9-.Lpg0(%r13),0xbf - jz .L002 - bas %r14,.Ldisab-.Lpg0(%r13) -.L002: tm .Liplirb+8-.Lpg0(%r13),0xf3 - jz .L003 - bas %r14,.Ldisab-.Lpg0(%r13) + jz .L002 + bas %r14,.Ldisab-.Lpg0(%r13) +.L002: tm .Liplirb+8-.Lpg0(%r13),0xf3 + jz .L003 + bas %r14,.Ldisab-.Lpg0(%r13) .L003: spx .Lnull-.Lpg0(%r13) - st %r1,__LC_SUBCHANNEL_ID - lhi %r1,0 # mode 0 = esa - slr %r0,%r0 # set cpuid to zero - sigp %r1,%r0,0x12 # switch to esa mode - lpsw 0 -.Ldisab: sll %r14,1 - srl %r14,1 # need to kill hi bit to avoid specification exceptions. - st %r14,.Ldispsw+12-.Lpg0(%r13) + st %r1,__LC_SUBCHANNEL_ID + lhi %r1,0 # mode 0 = esa + slr %r0,%r0 # set cpuid to zero + sigp %r1,%r0,0x12 # switch to esa mode + lpsw 0 +.Ldisab: sll %r14,1 + srl %r14,1 # need to kill hi bit to avoid specification exceptions. + st %r14,.Ldispsw+12-.Lpg0(%r13) lpswe .Ldispsw-.Lpg0(%r13) - .align 8 + .align 8 .Lclkcmp: .quad 0x0000000000000000 .Lall: .quad 0x00000000ff000000 .Lregsave: .quad 0x0000000000000000 -.Lnull: .long 0x0000000000000000 - .align 16 +.Lnull: .long 0x0000000000000000 + .align 16 /* * These addresses have to be 31 bit otherwise * the sigp will throw a specifcation exception @@ -81,26 +81,26 @@ do_reipl_asm: basr %r13,0 * 31bit lpswe instruction a fact they appear to have * ommited from the pop. */ -.Lnewpsw: .quad 0x0000000080000000 - .quad .Lpg1 -.Lpcnew: .quad 0x0000000080000000 - .quad .Lecs -.Lionew: .quad 0x0000000080000000 - .quad .Lcont +.Lnewpsw: .quad 0x0000000080000000 + .quad .Lpg1 +.Lpcnew: .quad 0x0000000080000000 + .quad .Lecs +.Lionew: .quad 0x0000000080000000 + .quad .Lcont .Lwaitpsw: .quad 0x0202000080000000 - .quad .Ltpi -.Ldispsw: .quad 0x0002000080000000 - .quad 0x0000000000000000 -.Liplccws: .long 0x02000000,0x60000018 - .long 0x08000008,0x20000001 + .quad .Ltpi +.Ldispsw: .quad 0x0002000080000000 + .quad 0x0000000000000000 +.Liplccws: .long 0x02000000,0x60000018 + .long 0x08000008,0x20000001 .Liplorb: .long 0x0049504c,0x0040ff80 .long 0x00000000+.Liplccws -.Lschib: .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 +.Lschib: .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 + .long 0x00000000,0x00000000 .Liplirb: .long 0x00000000,0x00000000 .long 0x00000000,0x00000000 .long 0x00000000,0x00000000 @@ -109,4 +109,3 @@ do_reipl_asm: basr %r13,0 .long 0x00000000,0x00000000 .long 0x00000000,0x00000000 .long 0x00000000,0x00000000 - diff --git a/arch/s390/kernel/relocate_kernel.S b/arch/s390/kernel/relocate_kernel.S index 2a25ec7147ff..f9899ff2e5b0 100644 --- a/arch/s390/kernel/relocate_kernel.S +++ b/arch/s390/kernel/relocate_kernel.S @@ -3,7 +3,7 @@ * * (C) Copyright IBM Corp. 2005 * - * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com> + * Author(s): Rolf Adelsberger, * Heiko Carstens <heiko.carstens@de.ibm.com> * */ @@ -24,14 +24,14 @@ .text .globl relocate_kernel relocate_kernel: - basr %r13,0 #base address + basr %r13,0 # base address .base: - stnsm sys_msk-.base(%r13),0xf8 #disable DAT and IRQ (external) - spx zero64-.base(%r13) #absolute addressing mode + stnsm sys_msk-.base(%r13),0xf8 # disable DAT and IRQ (external) + spx zero64-.base(%r13) # absolute addressing mode stctl %c0,%c15,ctlregs-.base(%r13) stm %r0,%r15,gprregs-.base(%r13) la %r1,load_psw-.base(%r13) - mvc 0(8,%r0),0(%r1) + mvc 0(8,%r0),0(%r1) la %r0,.back-.base(%r13) st %r0,4(%r0) oi 4(%r0),0x80 @@ -51,50 +51,50 @@ .back_pgm: lm %r0,%r15,gprregs-.base(%r13) .start_reloc: - lhi %r10,-1 #preparing the mask - sll %r10,12 #shift it such that it becomes 0xf000 + lhi %r10,-1 # preparing the mask + sll %r10,12 # shift it such that it becomes 0xf000 .top: - lhi %r7,4096 #load PAGE_SIZE in r7 - lhi %r9,4096 #load PAGE_SIZE in r9 - l %r5,0(%r2) #read another word for indirection page - ahi %r2,4 #increment pointer - tml %r5,0x1 #is it a destination page? - je .indir_check #NO, goto "indir_check" - lr %r6,%r5 #r6 = r5 - nr %r6,%r10 #mask it out and... - j .top #...next iteration + lhi %r7,4096 # load PAGE_SIZE in r7 + lhi %r9,4096 # load PAGE_SIZE in r9 + l %r5,0(%r2) # read another word for indirection page + ahi %r2,4 # increment pointer + tml %r5,0x1 # is it a destination page? + je .indir_check # NO, goto "indir_check" + lr %r6,%r5 # r6 = r5 + nr %r6,%r10 # mask it out and... + j .top # ...next iteration .indir_check: - tml %r5,0x2 #is it a indirection page? - je .done_test #NO, goto "done_test" - nr %r5,%r10 #YES, mask out, - lr %r2,%r5 #move it into the right register, - j .top #and read next... + tml %r5,0x2 # is it a indirection page? + je .done_test # NO, goto "done_test" + nr %r5,%r10 # YES, mask out, + lr %r2,%r5 # move it into the right register, + j .top # and read next... .done_test: - tml %r5,0x4 #is it the done indicator? - je .source_test #NO! Well, then it should be the source indicator... - j .done #ok, lets finish it here... + tml %r5,0x4 # is it the done indicator? + je .source_test # NO! Well, then it should be the source indicator... + j .done # ok, lets finish it here... .source_test: - tml %r5,0x8 #it should be a source indicator... - je .top #NO, ignore it... - lr %r8,%r5 #r8 = r5 - nr %r8,%r10 #masking - 0: mvcle %r6,%r8,0x0 #copy PAGE_SIZE bytes from r8 to r6 - pad with 0 + tml %r5,0x8 # it should be a source indicator... + je .top # NO, ignore it... + lr %r8,%r5 # r8 = r5 + nr %r8,%r10 # masking + 0: mvcle %r6,%r8,0x0 # copy PAGE_SIZE bytes from r8 to r6 - pad with 0 jo 0b j .top .done: - sr %r0,%r0 #clear register r0 - la %r4,load_psw-.base(%r13) #load psw-address into the register - o %r3,4(%r4) #or load address into psw + sr %r0,%r0 # clear register r0 + la %r4,load_psw-.base(%r13) # load psw-address into the register + o %r3,4(%r4) # or load address into psw st %r3,4(%r4) - mvc 0(8,%r0),0(%r4) #copy psw to absolute address 0 + mvc 0(8,%r0),0(%r4) # copy psw to absolute address 0 tm have_diag308-.base(%r13),0x01 jno .no_diag308 diag %r0,%r0,0x308 .no_diag308: - sr %r1,%r1 #clear %r1 - sr %r2,%r2 #clear %r2 - sigp %r1,%r2,0x12 #set cpuid to zero - lpsw 0 #hopefully start new kernel... + sr %r1,%r1 # clear %r1 + sr %r2,%r2 # clear %r2 + sigp %r1,%r2,0x12 # set cpuid to zero + lpsw 0 # hopefully start new kernel... .align 8 zero64: diff --git a/arch/s390/kernel/relocate_kernel64.S b/arch/s390/kernel/relocate_kernel64.S index 8cdb86e8911f..4fb443042d9c 100644 --- a/arch/s390/kernel/relocate_kernel64.S +++ b/arch/s390/kernel/relocate_kernel64.S @@ -3,7 +3,7 @@ * * (C) Copyright IBM Corp. 2005 * - * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com> + * Author(s): Rolf Adelsberger, * Heiko Carstens <heiko.carstens@de.ibm.com> * */ @@ -25,10 +25,10 @@ .text .globl relocate_kernel relocate_kernel: - basr %r13,0 #base address + basr %r13,0 # base address .base: - stnsm sys_msk-.base(%r13),0xf8 #disable DAT and IRQs - spx zero64-.base(%r13) #absolute addressing mode + stnsm sys_msk-.base(%r13),0xf8 # disable DAT and IRQs + spx zero64-.base(%r13) # absolute addressing mode stctg %c0,%c15,ctlregs-.base(%r13) stmg %r0,%r15,gprregs-.base(%r13) lghi %r0,3 @@ -37,16 +37,16 @@ la %r0,.back_pgm-.base(%r13) stg %r0,0x1d8(%r0) la %r1,load_psw-.base(%r13) - mvc 0(8,%r0),0(%r1) + mvc 0(8,%r0),0(%r1) la %r0,.back-.base(%r13) st %r0,4(%r0) oi 4(%r0),0x80 lghi %r0,0 diag %r0,%r0,0x308 .back: - lhi %r1,1 #mode 1 = esame - sigp %r1,%r0,0x12 #switch to esame mode - sam64 #switch to 64 bit addressing mode + lhi %r1,1 # mode 1 = esame + sigp %r1,%r0,0x12 # switch to esame mode + sam64 # switch to 64 bit addressing mode basr %r13,0 .back_base: oi have_diag308-.back_base(%r13),0x01 @@ -56,50 +56,50 @@ .back_pgm: lmg %r0,%r15,gprregs-.base(%r13) .top: - lghi %r7,4096 #load PAGE_SIZE in r7 - lghi %r9,4096 #load PAGE_SIZE in r9 - lg %r5,0(%r2) #read another word for indirection page - aghi %r2,8 #increment pointer - tml %r5,0x1 #is it a destination page? - je .indir_check #NO, goto "indir_check" - lgr %r6,%r5 #r6 = r5 - nill %r6,0xf000 #mask it out and... - j .top #...next iteration + lghi %r7,4096 # load PAGE_SIZE in r7 + lghi %r9,4096 # load PAGE_SIZE in r9 + lg %r5,0(%r2) # read another word for indirection page + aghi %r2,8 # increment pointer + tml %r5,0x1 # is it a destination page? + je .indir_check # NO, goto "indir_check" + lgr %r6,%r5 # r6 = r5 + nill %r6,0xf000 # mask it out and... + j .top # ...next iteration .indir_check: - tml %r5,0x2 #is it a indirection page? - je .done_test #NO, goto "done_test" - nill %r5,0xf000 #YES, mask out, - lgr %r2,%r5 #move it into the right register, - j .top #and read next... + tml %r5,0x2 # is it a indirection page? + je .done_test # NO, goto "done_test" + nill %r5,0xf000 # YES, mask out, + lgr %r2,%r5 # move it into the right register, + j .top # and read next... .done_test: - tml %r5,0x4 #is it the done indicator? - je .source_test #NO! Well, then it should be the source indicator... - j .done #ok, lets finish it here... + tml %r5,0x4 # is it the done indicator? + je .source_test # NO! Well, then it should be the source indicator... + j .done # ok, lets finish it here... .source_test: - tml %r5,0x8 #it should be a source indicator... - je .top #NO, ignore it... - lgr %r8,%r5 #r8 = r5 - nill %r8,0xf000 #masking - 0: mvcle %r6,%r8,0x0 #copy PAGE_SIZE bytes from r8 to r6 - pad with 0 + tml %r5,0x8 # it should be a source indicator... + je .top # NO, ignore it... + lgr %r8,%r5 # r8 = r5 + nill %r8,0xf000 # masking + 0: mvcle %r6,%r8,0x0 # copy PAGE_SIZE bytes from r8 to r6 - pad with 0 jo 0b - j .top + j .top .done: - sgr %r0,%r0 #clear register r0 - la %r4,load_psw-.base(%r13) #load psw-address into the register - o %r3,4(%r4) #or load address into psw + sgr %r0,%r0 # clear register r0 + la %r4,load_psw-.base(%r13) # load psw-address into the register + o %r3,4(%r4) # or load address into psw st %r3,4(%r4) - mvc 0(8,%r0),0(%r4) #copy psw to absolute address 0 + mvc 0(8,%r0),0(%r4) # copy psw to absolute address 0 tm have_diag308-.base(%r13),0x01 jno .no_diag308 diag %r0,%r0,0x308 .no_diag308: - sam31 #31 bit mode - sr %r1,%r1 #erase register r1 - sr %r2,%r2 #erase register r2 - sigp %r1,%r2,0x12 #set cpuid to zero - lpsw 0 #hopefully start new kernel... + sam31 # 31 bit mode + sr %r1,%r1 # erase register r1 + sr %r2,%r2 # erase register r2 + sigp %r1,%r2,0x12 # set cpuid to zero + lpsw 0 # hopefully start new kernel... - .align 8 + .align 8 zero64: .quad 0 load_psw: diff --git a/arch/s390/kernel/semaphore.c b/arch/s390/kernel/semaphore.c index 8dfb690c159f..191303f6c1d8 100644 --- a/arch/s390/kernel/semaphore.c +++ b/arch/s390/kernel/semaphore.c @@ -26,17 +26,17 @@ static inline int __sem_update_count(struct semaphore *sem, int incr) { int old_val, new_val; - __asm__ __volatile__(" l %0,0(%3)\n" - "0: ltr %1,%0\n" - " jhe 1f\n" - " lhi %1,0\n" - "1: ar %1,%4\n" - " cs %0,%1,0(%3)\n" - " jl 0b\n" - : "=&d" (old_val), "=&d" (new_val), - "=m" (sem->count) - : "a" (&sem->count), "d" (incr), "m" (sem->count) - : "cc" ); + asm volatile( + " l %0,0(%3)\n" + "0: ltr %1,%0\n" + " jhe 1f\n" + " lhi %1,0\n" + "1: ar %1,%4\n" + " cs %0,%1,0(%3)\n" + " jl 0b\n" + : "=&d" (old_val), "=&d" (new_val), "=m" (sem->count) + : "a" (&sem->count), "d" (incr), "m" (sem->count) + : "cc"); return old_val; } diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index e3d9325f6022..a21cfbb9d97e 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -101,7 +101,7 @@ void __devinit cpu_init (void) /* * Store processor id in lowcore (used e.g. in timer_interrupt) */ - asm volatile ("stidp %0": "=m" (S390_lowcore.cpu_data.cpu_id)); + asm volatile("stidp %0": "=m" (S390_lowcore.cpu_data.cpu_id)); S390_lowcore.cpu_data.cpu_addr = addr; /* diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index b2e6f4c8d382..a8e6199755d4 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -63,7 +63,7 @@ static void smp_ext_bitcall(int, ec_bit_sig); static void smp_ext_bitcall_others(ec_bit_sig); /* - * Structure and data for smp_call_function(). This is designed to minimise +5B * Structure and data for smp_call_function(). This is designed to minimise * static memory requirements. It also looks cleaner. */ static DEFINE_SPINLOCK(call_lock); @@ -418,59 +418,49 @@ void smp_send_reschedule(int cpu) /* * parameter area for the set/clear control bit callbacks */ -typedef struct -{ - __u16 start_ctl; - __u16 end_ctl; +struct ec_creg_mask_parms { unsigned long orvals[16]; unsigned long andvals[16]; -} ec_creg_mask_parms; +}; /* * callback for setting/clearing control bits */ void smp_ctl_bit_callback(void *info) { - ec_creg_mask_parms *pp; + struct ec_creg_mask_parms *pp = info; unsigned long cregs[16]; int i; - pp = (ec_creg_mask_parms *) info; - __ctl_store(cregs[pp->start_ctl], pp->start_ctl, pp->end_ctl); - for (i = pp->start_ctl; i <= pp->end_ctl; i++) + __ctl_store(cregs, 0, 15); + for (i = 0; i <= 15; i++) cregs[i] = (cregs[i] & pp->andvals[i]) | pp->orvals[i]; - __ctl_load(cregs[pp->start_ctl], pp->start_ctl, pp->end_ctl); + __ctl_load(cregs, 0, 15); } /* * Set a bit in a control register of all cpus */ -void smp_ctl_set_bit(int cr, int bit) { - ec_creg_mask_parms parms; +void smp_ctl_set_bit(int cr, int bit) +{ + struct ec_creg_mask_parms parms; - parms.start_ctl = cr; - parms.end_ctl = cr; + memset(&parms.orvals, 0, sizeof(parms.orvals)); + memset(&parms.andvals, 0xff, sizeof(parms.andvals)); parms.orvals[cr] = 1 << bit; - parms.andvals[cr] = -1L; - preempt_disable(); - smp_call_function(smp_ctl_bit_callback, &parms, 0, 1); - __ctl_set_bit(cr, bit); - preempt_enable(); + on_each_cpu(smp_ctl_bit_callback, &parms, 0, 1); } /* * Clear a bit in a control register of all cpus */ -void smp_ctl_clear_bit(int cr, int bit) { - ec_creg_mask_parms parms; +void smp_ctl_clear_bit(int cr, int bit) +{ + struct ec_creg_mask_parms parms; - parms.start_ctl = cr; - parms.end_ctl = cr; - parms.orvals[cr] = 0; + memset(&parms.orvals, 0, sizeof(parms.orvals)); + memset(&parms.andvals, 0xff, sizeof(parms.andvals)); parms.andvals[cr] = ~(1L << bit); - preempt_disable(); - smp_call_function(smp_ctl_bit_callback, &parms, 0, 1); - __ctl_clear_bit(cr, bit); - preempt_enable(); + on_each_cpu(smp_ctl_bit_callback, &parms, 0, 1); } /* @@ -650,9 +640,9 @@ __cpu_up(unsigned int cpu) sf->gprs[9] = (unsigned long) sf; cpu_lowcore->save_area[15] = (unsigned long) sf; __ctl_store(cpu_lowcore->cregs_save_area[0], 0, 15); - __asm__ __volatile__("stam 0,15,0(%0)" - : : "a" (&cpu_lowcore->access_regs_save_area) - : "memory"); + asm volatile( + " stam 0,15,0(%0)" + : : "a" (&cpu_lowcore->access_regs_save_area) : "memory"); cpu_lowcore->percpu_offset = __per_cpu_offset[cpu]; cpu_lowcore->current_task = (unsigned long) idle; cpu_lowcore->cpu_data.cpu_nr = cpu; @@ -708,7 +698,7 @@ int __cpu_disable(void) { unsigned long flags; - ec_creg_mask_parms cr_parms; + struct ec_creg_mask_parms cr_parms; int cpu = smp_processor_id(); spin_lock_irqsave(&smp_reserve_lock, flags); @@ -724,30 +714,21 @@ __cpu_disable(void) pfault_fini(); #endif - /* disable all external interrupts */ + memset(&cr_parms.orvals, 0, sizeof(cr_parms.orvals)); + memset(&cr_parms.andvals, 0xff, sizeof(cr_parms.andvals)); - cr_parms.start_ctl = 0; - cr_parms.end_ctl = 0; + /* disable all external interrupts */ cr_parms.orvals[0] = 0; cr_parms.andvals[0] = ~(1<<15 | 1<<14 | 1<<13 | 1<<12 | 1<<11 | 1<<10 | 1<< 6 | 1<< 4); - smp_ctl_bit_callback(&cr_parms); - /* disable all I/O interrupts */ - - cr_parms.start_ctl = 6; - cr_parms.end_ctl = 6; cr_parms.orvals[6] = 0; cr_parms.andvals[6] = ~(1<<31 | 1<<30 | 1<<29 | 1<<28 | 1<<27 | 1<<26 | 1<<25 | 1<<24); - smp_ctl_bit_callback(&cr_parms); - /* disable most machine checks */ - - cr_parms.start_ctl = 14; - cr_parms.end_ctl = 14; cr_parms.orvals[14] = 0; cr_parms.andvals[14] = ~(1<<28 | 1<<27 | 1<<26 | 1<<25 | 1<<24); + smp_ctl_bit_callback(&cr_parms); spin_unlock_irqrestore(&smp_reserve_lock, flags); diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 74e6178fbaf2..4bf66cc4a267 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -53,8 +53,6 @@ static u64 init_timer_cc; static u64 jiffies_timer_cc; static u64 xtime_cc; -extern unsigned long wall_jiffies; - /* * Scheduler clock - returns current time in nanosec units. */ @@ -87,9 +85,8 @@ static inline unsigned long do_gettimeoffset(void) { __u64 now; - now = (get_clock() - jiffies_timer_cc) >> 12; - /* We require the offset from the latest update of xtime */ - now -= (__u64) wall_jiffies*USECS_PER_JIFFY; + now = (get_clock() - jiffies_timer_cc) >> 12; + now -= (__u64) jiffies * USECS_PER_JIFFY; return (unsigned long) now; } @@ -166,7 +163,7 @@ EXPORT_SYMBOL(do_settimeofday); void account_ticks(struct pt_regs *regs) { __u64 tmp; - __u32 ticks, xticks; + __u32 ticks; /* Calculate how many ticks have passed. */ if (S390_lowcore.int_clock < S390_lowcore.jiffy_timer) { @@ -204,6 +201,7 @@ void account_ticks(struct pt_regs *regs) */ write_seqlock(&xtime_lock); if (S390_lowcore.jiffy_timer > xtime_cc) { + __u32 xticks; tmp = S390_lowcore.jiffy_timer - xtime_cc; if (tmp >= 2*CLK_TICKS_PER_JIFFY) { xticks = __div(tmp, CLK_TICKS_PER_JIFFY); @@ -212,13 +210,11 @@ void account_ticks(struct pt_regs *regs) xticks = 1; xtime_cc += CLK_TICKS_PER_JIFFY; } - while (xticks--) - do_timer(regs); + do_timer(xticks); } write_sequnlock(&xtime_lock); #else - for (xticks = ticks; xticks > 0; xticks--) - do_timer(regs); + do_timer(ticks); #endif #ifdef CONFIG_VIRT_CPU_ACCOUNTING @@ -351,10 +347,12 @@ void __init time_init(void) int cc; /* kick the TOD clock */ - asm volatile ("STCK 0(%1)\n\t" - "IPM %0\n\t" - "SRL %0,28" : "=r" (cc) : "a" (&init_timer_cc) - : "memory", "cc"); + asm volatile( + " stck 0(%2)\n" + " ipm %0\n" + " srl %0,28" + : "=d" (cc), "=m" (init_timer_cc) + : "a" (&init_timer_cc) : "cc"); switch (cc) { case 0: /* clock in set state: all is fine */ break; diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index c4982c963424..3eb4fab048b8 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -597,8 +597,7 @@ asmlinkage void data_exception(struct pt_regs * regs, long interruption_code) local_irq_enable(); if (MACHINE_HAS_IEEE) - __asm__ volatile ("stfpc %0\n\t" - : "=m" (current->thread.fp_regs.fpc)); + asm volatile("stfpc %0" : "=m" (current->thread.fp_regs.fpc)); #ifdef CONFIG_MATHEMU else if (regs->psw.mask & PSW_MASK_PSTATE) { diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile index c42ffedfdb49..b0cfa6c4883d 100644 --- a/arch/s390/lib/Makefile +++ b/arch/s390/lib/Makefile @@ -5,5 +5,6 @@ EXTRA_AFLAGS := -traditional lib-y += delay.o string.o uaccess_std.o +lib-$(CONFIG_32BIT) += div64.o lib-$(CONFIG_64BIT) += uaccess_mvcos.o lib-$(CONFIG_SMP) += spinlock.o diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c index 468f4ea33f99..027c4742a001 100644 --- a/arch/s390/lib/delay.c +++ b/arch/s390/lib/delay.c @@ -27,9 +27,7 @@ void __delay(unsigned long loops) * yield the megahertz number of the cpu. The important function * is udelay and that is done using the tod clock. -- martin. */ - __asm__ __volatile__( - "0: brct %0,0b" - : /* no outputs */ : "r" ((loops/2) + 1)); + asm volatile("0: brct %0,0b" : : "d" ((loops/2) + 1)); } /* @@ -38,13 +36,12 @@ void __delay(unsigned long loops) */ void __udelay(unsigned long usecs) { - uint64_t start_cc, end_cc; + uint64_t start_cc; if (usecs == 0) return; - asm volatile ("STCK %0" : "=m" (start_cc)); + start_cc = get_clock(); do { cpu_relax(); - asm volatile ("STCK %0" : "=m" (end_cc)); - } while (((end_cc - start_cc)/4096) < usecs); + } while (((get_clock() - start_cc)/4096) < usecs); } diff --git a/arch/s390/lib/div64.c b/arch/s390/lib/div64.c new file mode 100644 index 000000000000..0481f3424a13 --- /dev/null +++ b/arch/s390/lib/div64.c @@ -0,0 +1,151 @@ +/* + * arch/s390/lib/div64.c + * + * __div64_32 implementation for 31 bit. + * + * Copyright (C) IBM Corp. 2006 + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), + */ + +#include <linux/types.h> +#include <linux/module.h> + +#ifdef CONFIG_MARCH_G5 + +/* + * Function to divide an unsigned 64 bit integer by an unsigned + * 31 bit integer using signed 64/32 bit division. + */ +static uint32_t __div64_31(uint64_t *n, uint32_t base) +{ + register uint32_t reg2 asm("2"); + register uint32_t reg3 asm("3"); + uint32_t *words = (uint32_t *) n; + uint32_t tmp; + + /* Special case base==1, remainder = 0, quotient = n */ + if (base == 1) + return 0; + /* + * Special case base==0 will cause a fixed point divide exception + * on the dr instruction and may not happen anyway. For the + * following calculation we can assume base > 1. The first + * signed 64 / 32 bit division with an upper half of 0 will + * give the correct upper half of the 64 bit quotient. + */ + reg2 = 0UL; + reg3 = words[0]; + asm volatile( + " dr %0,%2\n" + : "+d" (reg2), "+d" (reg3) : "d" (base) : "cc" ); + words[0] = reg3; + reg3 = words[1]; + /* + * To get the lower half of the 64 bit quotient and the 32 bit + * remainder we have to use a little trick. Since we only have + * a signed division the quotient can get too big. To avoid this + * the 64 bit dividend is halved, then the signed division will + * work. Afterwards the quotient and the remainder are doubled. + * If the last bit of the dividend has been one the remainder + * is increased by one then checked against the base. If the + * remainder has overflown subtract base and increase the + * quotient. Simple, no ? + */ + asm volatile( + " nr %2,%1\n" + " srdl %0,1\n" + " dr %0,%3\n" + " alr %0,%0\n" + " alr %1,%1\n" + " alr %0,%2\n" + " clr %0,%3\n" + " jl 0f\n" + " slr %0,%3\n" + " alr %1,%2\n" + "0:\n" + : "+d" (reg2), "+d" (reg3), "=d" (tmp) + : "d" (base), "2" (1UL) : "cc" ); + words[1] = reg3; + return reg2; +} + +/* + * Function to divide an unsigned 64 bit integer by an unsigned + * 32 bit integer using the unsigned 64/31 bit division. + */ +uint32_t __div64_32(uint64_t *n, uint32_t base) +{ + uint32_t r; + + /* + * If the most significant bit of base is set, divide n by + * (base/2). That allows to use 64/31 bit division and gives a + * good approximation of the result: n = (base/2)*q + r. The + * result needs to be corrected with two simple transformations. + * If base is already < 2^31-1 __div64_31 can be used directly. + */ + r = __div64_31(n, ((signed) base < 0) ? (base/2) : base); + if ((signed) base < 0) { + uint64_t q = *n; + /* + * First transformation: + * n = (base/2)*q + r + * = ((base/2)*2)*(q/2) + ((q&1) ? (base/2) : 0) + r + * Since r < (base/2), r + (base/2) < base. + * With q1 = (q/2) and r1 = r + ((q&1) ? (base/2) : 0) + * n = ((base/2)*2)*q1 + r1 with r1 < base. + */ + if (q & 1) + r += base/2; + q >>= 1; + /* + * Second transformation. ((base/2)*2) could have lost the + * last bit. + * n = ((base/2)*2)*q1 + r1 + * = base*q1 - ((base&1) ? q1 : 0) + r1 + */ + if (base & 1) { + int64_t rx = r - q; + /* + * base is >= 2^31. The worst case for the while + * loop is n=2^64-1 base=2^31+1. That gives a + * maximum for q=(2^64-1)/2^31 = 0x1ffffffff. Since + * base >= 2^31 the loop is finished after a maximum + * of three iterations. + */ + while (rx < 0) { + rx += base; + q--; + } + r = rx; + } + *n = q; + } + return r; +} + +#else /* MARCH_G5 */ + +uint32_t __div64_32(uint64_t *n, uint32_t base) +{ + register uint32_t reg2 asm("2"); + register uint32_t reg3 asm("3"); + uint32_t *words = (uint32_t *) n; + + reg2 = 0UL; + reg3 = words[0]; + asm volatile( + " dlr %0,%2\n" + : "+d" (reg2), "+d" (reg3) : "d" (base) : "cc" ); + words[0] = reg3; + reg3 = words[1]; + asm volatile( + " dlr %0,%2\n" + : "+d" (reg2), "+d" (reg3) : "d" (base) : "cc" ); + words[1] = reg3; + return reg2; +} + +#endif /* MARCH_G5 */ + +EXPORT_SYMBOL(__div64_32); diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c index b9b7958a226a..8d76403fcf89 100644 --- a/arch/s390/lib/spinlock.c +++ b/arch/s390/lib/spinlock.c @@ -24,57 +24,76 @@ static int __init spin_retry_setup(char *str) } __setup("spin_retry=", spin_retry_setup); -static inline void -_diag44(void) +static inline void _raw_yield(void) { -#ifdef CONFIG_64BIT if (MACHINE_HAS_DIAG44) -#endif asm volatile("diag 0,0,0x44"); } -void -_raw_spin_lock_wait(raw_spinlock_t *lp, unsigned int pc) +static inline void _raw_yield_cpu(int cpu) +{ + if (MACHINE_HAS_DIAG9C) + asm volatile("diag %0,0,0x9c" + : : "d" (__cpu_logical_map[cpu])); + else + _raw_yield(); +} + +void _raw_spin_lock_wait(raw_spinlock_t *lp, unsigned int pc) { int count = spin_retry; + unsigned int cpu = ~smp_processor_id(); while (1) { if (count-- <= 0) { - _diag44(); + unsigned int owner = lp->owner_cpu; + if (owner != 0) + _raw_yield_cpu(~owner); count = spin_retry; } if (__raw_spin_is_locked(lp)) continue; - if (_raw_compare_and_swap(&lp->lock, 0, pc) == 0) + if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0) { + lp->owner_pc = pc; return; + } } } EXPORT_SYMBOL(_raw_spin_lock_wait); -int -_raw_spin_trylock_retry(raw_spinlock_t *lp, unsigned int pc) +int _raw_spin_trylock_retry(raw_spinlock_t *lp, unsigned int pc) { - int count = spin_retry; + unsigned int cpu = ~smp_processor_id(); + int count; - while (count-- > 0) { + for (count = spin_retry; count > 0; count--) { if (__raw_spin_is_locked(lp)) continue; - if (_raw_compare_and_swap(&lp->lock, 0, pc) == 0) + if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0) { + lp->owner_pc = pc; return 1; + } } return 0; } EXPORT_SYMBOL(_raw_spin_trylock_retry); -void -_raw_read_lock_wait(raw_rwlock_t *rw) +void _raw_spin_relax(raw_spinlock_t *lock) +{ + unsigned int cpu = lock->owner_cpu; + if (cpu != 0) + _raw_yield_cpu(~cpu); +} +EXPORT_SYMBOL(_raw_spin_relax); + +void _raw_read_lock_wait(raw_rwlock_t *rw) { unsigned int old; int count = spin_retry; while (1) { if (count-- <= 0) { - _diag44(); + _raw_yield(); count = spin_retry; } if (!__raw_read_can_lock(rw)) @@ -86,8 +105,7 @@ _raw_read_lock_wait(raw_rwlock_t *rw) } EXPORT_SYMBOL(_raw_read_lock_wait); -int -_raw_read_trylock_retry(raw_rwlock_t *rw) +int _raw_read_trylock_retry(raw_rwlock_t *rw) { unsigned int old; int count = spin_retry; @@ -103,14 +121,13 @@ _raw_read_trylock_retry(raw_rwlock_t *rw) } EXPORT_SYMBOL(_raw_read_trylock_retry); -void -_raw_write_lock_wait(raw_rwlock_t *rw) +void _raw_write_lock_wait(raw_rwlock_t *rw) { int count = spin_retry; while (1) { if (count-- <= 0) { - _diag44(); + _raw_yield(); count = spin_retry; } if (!__raw_write_can_lock(rw)) @@ -121,8 +138,7 @@ _raw_write_lock_wait(raw_rwlock_t *rw) } EXPORT_SYMBOL(_raw_write_lock_wait); -int -_raw_write_trylock_retry(raw_rwlock_t *rw) +int _raw_write_trylock_retry(raw_rwlock_t *rw) { int count = spin_retry; diff --git a/arch/s390/lib/uaccess_mvcos.c b/arch/s390/lib/uaccess_mvcos.c index 86c96d6c191a..121b2935a422 100644 --- a/arch/s390/lib/uaccess_mvcos.c +++ b/arch/s390/lib/uaccess_mvcos.c @@ -35,7 +35,7 @@ size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x) tmp1 = -4096UL; asm volatile( "0: .insn ss,0xc80000000000,0(%0,%2),0(%1),0\n" - " jz 4f\n" + " jz 7f\n" "1:"ALR" %0,%3\n" " "SLR" %1,%3\n" " "SLR" %2,%3\n" @@ -44,13 +44,23 @@ size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x) " nr %4,%3\n" /* %4 = (ptr + 4095) & -4096 */ " "SLR" %4,%1\n" " "CLR" %0,%4\n" /* copy crosses next page boundary? */ - " jnh 5f\n" + " jnh 4f\n" "3: .insn ss,0xc80000000000,0(%4,%2),0(%1),0\n" " "SLR" %0,%4\n" - " j 5f\n" - "4:"SLR" %0,%0\n" - "5: \n" - EX_TABLE(0b,2b) EX_TABLE(3b,5b) + " "ALR" %2,%4\n" + "4:"LHI" %4,-1\n" + " "ALR" %4,%0\n" /* copy remaining size, subtract 1 */ + " bras %3,6f\n" /* memset loop */ + " xc 0(1,%2),0(%2)\n" + "5: xc 0(256,%2),0(%2)\n" + " la %2,256(%2)\n" + "6:"AHI" %4,-256\n" + " jnm 5b\n" + " ex %4,0(%3)\n" + " j 8f\n" + "7:"SLR" %0,%0\n" + "8: \n" + EX_TABLE(0b,2b) EX_TABLE(3b,4b) : "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2) : "d" (reg0) : "cc", "memory"); return size; diff --git a/arch/s390/lib/uaccess_std.c b/arch/s390/lib/uaccess_std.c index 9a4d4a29ea79..f44f0078b354 100644 --- a/arch/s390/lib/uaccess_std.c +++ b/arch/s390/lib/uaccess_std.c @@ -35,25 +35,35 @@ size_t copy_from_user_std(size_t size, const void __user *ptr, void *x) tmp1 = -256UL; asm volatile( "0: mvcp 0(%0,%2),0(%1),%3\n" - " jz 5f\n" + " jz 8f\n" "1:"ALR" %0,%3\n" " la %1,256(%1)\n" " la %2,256(%2)\n" "2: mvcp 0(%0,%2),0(%1),%3\n" " jnz 1b\n" - " j 5f\n" + " j 8f\n" "3: la %4,255(%1)\n" /* %4 = ptr + 255 */ " "LHI" %3,-4096\n" " nr %4,%3\n" /* %4 = (ptr + 255) & -4096 */ " "SLR" %4,%1\n" " "CLR" %0,%4\n" /* copy crosses next page boundary? */ - " jnh 6f\n" + " jnh 5f\n" "4: mvcp 0(%4,%2),0(%1),%3\n" " "SLR" %0,%4\n" - " j 6f\n" - "5:"SLR" %0,%0\n" - "6: \n" - EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,6b) + " "ALR" %2,%4\n" + "5:"LHI" %4,-1\n" + " "ALR" %4,%0\n" /* copy remaining size, subtract 1 */ + " bras %3,7f\n" /* memset loop */ + " xc 0(1,%2),0(%2)\n" + "6: xc 0(256,%2),0(%2)\n" + " la %2,256(%2)\n" + "7:"AHI" %4,-256\n" + " jnm 6b\n" + " ex %4,0(%3)\n" + " j 9f\n" + "8:"SLR" %0,%0\n" + "9: \n" + EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,5b) : "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2) : : "cc", "memory"); return size; @@ -67,16 +77,22 @@ size_t copy_from_user_std_small(size_t size, const void __user *ptr, void *x) asm volatile( "0: mvcp 0(%0,%2),0(%1),%3\n" " "SLR" %0,%0\n" - " j 3f\n" + " j 5f\n" "1: la %4,255(%1)\n" /* %4 = ptr + 255 */ " "LHI" %3,-4096\n" " nr %4,%3\n" /* %4 = (ptr + 255) & -4096 */ " "SLR" %4,%1\n" " "CLR" %0,%4\n" /* copy crosses next page boundary? */ - " jnh 3f\n" + " jnh 5f\n" "2: mvcp 0(%4,%2),0(%1),%3\n" " "SLR" %0,%4\n" - "3:\n" + " "ALR" %2,%4\n" + "3:"LHI" %4,-1\n" + " "ALR" %4,%0\n" /* copy remaining size, subtract 1 */ + " bras %3,4f\n" + " xc 0(1,%2),0(%2)\n" + "4: ex %4,0(%3)\n" + "5:\n" EX_TABLE(0b,1b) EX_TABLE(2b,3b) : "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2) : : "cc", "memory"); diff --git a/arch/s390/math-emu/math.c b/arch/s390/math-emu/math.c index b4957c84e4d6..6b9aec5a2c18 100644 --- a/arch/s390/math-emu/math.c +++ b/arch/s390/math-emu/math.c @@ -1564,52 +1564,52 @@ static int emu_tceb (struct pt_regs *regs, int rx, long val) { } static inline void emu_load_regd(int reg) { - if ((reg&9) != 0) /* test if reg in {0,2,4,6} */ + if ((reg&9) != 0) /* test if reg in {0,2,4,6} */ return; - asm volatile ( /* load reg from fp_regs.fprs[reg] */ - " bras 1,0f\n" - " ld 0,0(%1)\n" - "0: ex %0,0(1)" - : /* no output */ - : "a" (reg<<4),"a" (¤t->thread.fp_regs.fprs[reg].d) - : "1" ); + asm volatile( /* load reg from fp_regs.fprs[reg] */ + " bras 1,0f\n" + " ld 0,0(%1)\n" + "0: ex %0,0(1)" + : /* no output */ + : "a" (reg<<4),"a" (¤t->thread.fp_regs.fprs[reg].d) + : "1"); } static inline void emu_load_rege(int reg) { - if ((reg&9) != 0) /* test if reg in {0,2,4,6} */ + if ((reg&9) != 0) /* test if reg in {0,2,4,6} */ return; - asm volatile ( /* load reg from fp_regs.fprs[reg] */ - " bras 1,0f\n" - " le 0,0(%1)\n" - "0: ex %0,0(1)" - : /* no output */ - : "a" (reg<<4), "a" (¤t->thread.fp_regs.fprs[reg].f) - : "1" ); + asm volatile( /* load reg from fp_regs.fprs[reg] */ + " bras 1,0f\n" + " le 0,0(%1)\n" + "0: ex %0,0(1)" + : /* no output */ + : "a" (reg<<4), "a" (¤t->thread.fp_regs.fprs[reg].f) + : "1"); } static inline void emu_store_regd(int reg) { - if ((reg&9) != 0) /* test if reg in {0,2,4,6} */ + if ((reg&9) != 0) /* test if reg in {0,2,4,6} */ return; - asm volatile ( /* store reg to fp_regs.fprs[reg] */ - " bras 1,0f\n" - " std 0,0(%1)\n" - "0: ex %0,0(1)" - : /* no output */ - : "a" (reg<<4), "a" (¤t->thread.fp_regs.fprs[reg].d) - : "1" ); + asm volatile( /* store reg to fp_regs.fprs[reg] */ + " bras 1,0f\n" + " std 0,0(%1)\n" + "0: ex %0,0(1)" + : /* no output */ + : "a" (reg<<4), "a" (¤t->thread.fp_regs.fprs[reg].d) + : "1"); } static inline void emu_store_rege(int reg) { - if ((reg&9) != 0) /* test if reg in {0,2,4,6} */ + if ((reg&9) != 0) /* test if reg in {0,2,4,6} */ return; - asm volatile ( /* store reg to fp_regs.fprs[reg] */ - " bras 1,0f\n" - " ste 0,0(%1)\n" - "0: ex %0,0(1)" - : /* no output */ - : "a" (reg<<4), "a" (¤t->thread.fp_regs.fprs[reg].f) - : "1" ); + asm volatile( /* store reg to fp_regs.fprs[reg] */ + " bras 1,0f\n" + " ste 0,0(%1)\n" + "0: ex %0,0(1)" + : /* no output */ + : "a" (reg<<4), "a" (¤t->thread.fp_regs.fprs[reg].f) + : "1"); } int math_emu_b3(__u8 *opcode, struct pt_regs * regs) { @@ -2089,23 +2089,22 @@ int math_emu_ldr(__u8 *opcode) { if ((opc & 0x90) == 0) { /* test if rx in {0,2,4,6} */ /* we got an exception therfore ry can't be in {0,2,4,6} */ - __asm__ __volatile ( /* load rx from fp_regs.fprs[ry] */ - " bras 1,0f\n" - " ld 0,0(%1)\n" - "0: ex %0,0(1)" - : /* no output */ - : "a" (opc & 0xf0), - "a" (&fp_regs->fprs[opc & 0xf].d) - : "1" ); + asm volatile( /* load rx from fp_regs.fprs[ry] */ + " bras 1,0f\n" + " ld 0,0(%1)\n" + "0: ex %0,0(1)" + : /* no output */ + : "a" (opc & 0xf0), "a" (&fp_regs->fprs[opc & 0xf].d) + : "1"); } else if ((opc & 0x9) == 0) { /* test if ry in {0,2,4,6} */ - __asm__ __volatile ( /* store ry to fp_regs.fprs[rx] */ - " bras 1,0f\n" - " std 0,0(%1)\n" - "0: ex %0,0(1)" - : /* no output */ - : "a" ((opc & 0xf) << 4), - "a" (&fp_regs->fprs[(opc & 0xf0)>>4].d) - : "1" ); + asm volatile ( /* store ry to fp_regs.fprs[rx] */ + " bras 1,0f\n" + " std 0,0(%1)\n" + "0: ex %0,0(1)" + : /* no output */ + : "a" ((opc & 0xf) << 4), + "a" (&fp_regs->fprs[(opc & 0xf0)>>4].d) + : "1"); } else /* move fp_regs.fprs[ry] to fp_regs.fprs[rx] */ fp_regs->fprs[(opc & 0xf0) >> 4] = fp_regs->fprs[opc & 0xf]; return 0; @@ -2120,23 +2119,22 @@ int math_emu_ler(__u8 *opcode) { if ((opc & 0x90) == 0) { /* test if rx in {0,2,4,6} */ /* we got an exception therfore ry can't be in {0,2,4,6} */ - __asm__ __volatile ( /* load rx from fp_regs.fprs[ry] */ - " bras 1,0f\n" - " le 0,0(%1)\n" - "0: ex %0,0(1)" - : /* no output */ - : "a" (opc & 0xf0), - "a" (&fp_regs->fprs[opc & 0xf].f) - : "1" ); + asm volatile( /* load rx from fp_regs.fprs[ry] */ + " bras 1,0f\n" + " le 0,0(%1)\n" + "0: ex %0,0(1)" + : /* no output */ + : "a" (opc & 0xf0), "a" (&fp_regs->fprs[opc & 0xf].f) + : "1"); } else if ((opc & 0x9) == 0) { /* test if ry in {0,2,4,6} */ - __asm__ __volatile ( /* store ry to fp_regs.fprs[rx] */ - " bras 1,0f\n" - " ste 0,0(%1)\n" - "0: ex %0,0(1)" - : /* no output */ - : "a" ((opc & 0xf) << 4), - "a" (&fp_regs->fprs[(opc & 0xf0) >> 4].f) - : "1" ); + asm volatile( /* store ry to fp_regs.fprs[rx] */ + " bras 1,0f\n" + " ste 0,0(%1)\n" + "0: ex %0,0(1)" + : /* no output */ + : "a" ((opc & 0xf) << 4), + "a" (&fp_regs->fprs[(opc & 0xf0) >> 4].f) + : "1"); } else /* move fp_regs.fprs[ry] to fp_regs.fprs[rx] */ fp_regs->fprs[(opc & 0xf0) >> 4] = fp_regs->fprs[opc & 0xf]; return 0; diff --git a/arch/s390/math-emu/sfp-util.h b/arch/s390/math-emu/sfp-util.h index ab556b600f73..5b6ca4570ea4 100644 --- a/arch/s390/math-emu/sfp-util.h +++ b/arch/s390/math-emu/sfp-util.h @@ -4,48 +4,51 @@ #include <asm/byteorder.h> #define add_ssaaaa(sh, sl, ah, al, bh, bl) ({ \ - unsigned int __sh = (ah); \ - unsigned int __sl = (al); \ - __asm__ (" alr %1,%3\n" \ - " brc 12,0f\n" \ - " ahi %0,1\n" \ - "0: alr %0,%2" \ - : "+&d" (__sh), "+d" (__sl) \ - : "d" (bh), "d" (bl) : "cc" ); \ - (sh) = __sh; \ - (sl) = __sl; \ + unsigned int __sh = (ah); \ + unsigned int __sl = (al); \ + asm volatile( \ + " alr %1,%3\n" \ + " brc 12,0f\n" \ + " ahi %0,1\n" \ + "0: alr %0,%2" \ + : "+&d" (__sh), "+d" (__sl) \ + : "d" (bh), "d" (bl) : "cc"); \ + (sh) = __sh; \ + (sl) = __sl; \ }) #define sub_ddmmss(sh, sl, ah, al, bh, bl) ({ \ - unsigned int __sh = (ah); \ - unsigned int __sl = (al); \ - __asm__ (" slr %1,%3\n" \ - " brc 3,0f\n" \ - " ahi %0,-1\n" \ - "0: slr %0,%2" \ - : "+&d" (__sh), "+d" (__sl) \ - : "d" (bh), "d" (bl) : "cc" ); \ - (sh) = __sh; \ - (sl) = __sl; \ + unsigned int __sh = (ah); \ + unsigned int __sl = (al); \ + asm volatile( \ + " slr %1,%3\n" \ + " brc 3,0f\n" \ + " ahi %0,-1\n" \ + "0: slr %0,%2" \ + : "+&d" (__sh), "+d" (__sl) \ + : "d" (bh), "d" (bl) : "cc"); \ + (sh) = __sh; \ + (sl) = __sl; \ }) /* a umul b = a mul b + (a>=2<<31) ? b<<32:0 + (b>=2<<31) ? a<<32:0 */ #define umul_ppmm(wh, wl, u, v) ({ \ - unsigned int __wh = u; \ - unsigned int __wl = v; \ - __asm__ (" ltr 1,%0\n" \ - " mr 0,%1\n" \ - " jnm 0f\n" \ - " alr 0,%1\n" \ - "0: ltr %1,%1\n" \ - " jnm 1f\n" \ - " alr 0,%0\n" \ - "1: lr %0,0\n" \ - " lr %1,1\n" \ - : "+d" (__wh), "+d" (__wl) \ - : : "0", "1", "cc" ); \ - wh = __wh; \ - wl = __wl; \ + unsigned int __wh = u; \ + unsigned int __wl = v; \ + asm volatile( \ + " ltr 1,%0\n" \ + " mr 0,%1\n" \ + " jnm 0f\n" \ + " alr 0,%1\n" \ + "0: ltr %1,%1\n" \ + " jnm 1f\n" \ + " alr 0,%0\n" \ + "1: lr %0,0\n" \ + " lr %1,1\n" \ + : "+d" (__wh), "+d" (__wl) \ + : : "0", "1", "cc"); \ + wh = __wh; \ + wl = __wl; \ }) #define udiv_qrnnd(q, r, n1, n0, d) \ diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c index 9b11e3e20903..226275d5c4f6 100644 --- a/arch/s390/mm/extmem.c +++ b/arch/s390/mm/extmem.c @@ -142,17 +142,17 @@ dcss_diag (__u8 func, void *parameter, rx = (unsigned long) parameter; ry = (unsigned long) func; - __asm__ __volatile__( + asm volatile( #ifdef CONFIG_64BIT - " sam31\n" // switch to 31 bit - " diag %0,%1,0x64\n" - " sam64\n" // switch back to 64 bit + " sam31\n" + " diag %0,%1,0x64\n" + " sam64\n" #else - " diag %0,%1,0x64\n" + " diag %0,%1,0x64\n" #endif - " ipm %2\n" - " srl %2,28\n" - : "+d" (rx), "+d" (ry), "=d" (rc) : : "cc" ); + " ipm %2\n" + " srl %2,28\n" + : "+d" (rx), "+d" (ry), "=d" (rc) : : "cc"); *ret1 = rx; *ret2 = ry; return rc; diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 44f0cda7e72e..9c3c19fe62fc 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -353,8 +353,9 @@ no_context: */ out_of_memory: up_read(&mm->mmap_sem); - if (tsk->pid == 1) { + if (is_init(tsk)) { yield(); + down_read(&mm->mmap_sem); goto survive; } printk("VM: killing process %s\n", tsk->comm); @@ -423,20 +424,13 @@ int pfault_init(void) if (pfault_disable) return -1; - __asm__ __volatile__( - " diag %1,%0,0x258\n" - "0: j 2f\n" - "1: la %0,8\n" + asm volatile( + " diag %1,%0,0x258\n" + "0: j 2f\n" + "1: la %0,8\n" "2:\n" - ".section __ex_table,\"a\"\n" - " .align 4\n" -#ifndef CONFIG_64BIT - " .long 0b,1b\n" -#else /* CONFIG_64BIT */ - " .quad 0b,1b\n" -#endif /* CONFIG_64BIT */ - ".previous" - : "=d" (rc) : "a" (&refbk), "m" (refbk) : "cc" ); + EX_TABLE(0b,1b) + : "=d" (rc) : "a" (&refbk), "m" (refbk) : "cc"); __ctl_set_bit(0, 9); return rc; } @@ -449,18 +443,11 @@ void pfault_fini(void) if (pfault_disable) return; __ctl_clear_bit(0,9); - __asm__ __volatile__( - " diag %0,0,0x258\n" + asm volatile( + " diag %0,0,0x258\n" "0:\n" - ".section __ex_table,\"a\"\n" - " .align 4\n" -#ifndef CONFIG_64BIT - " .long 0b,0b\n" -#else /* CONFIG_64BIT */ - " .quad 0b,0b\n" -#endif /* CONFIG_64BIT */ - ".previous" - : : "a" (&refbk), "m" (refbk) : "cc" ); + EX_TABLE(0b,0b) + : : "a" (&refbk), "m" (refbk) : "cc"); } asmlinkage void diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index cfd9b8f7a523..127044e1707c 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -45,26 +45,17 @@ void diag10(unsigned long addr) { if (addr >= 0x7ff00000) return; + asm volatile( #ifdef CONFIG_64BIT - asm volatile ( - " sam31\n" - " diag %0,%0,0x10\n" - "0: sam64\n" - ".section __ex_table,\"a\"\n" - " .align 8\n" - " .quad 0b, 0b\n" - ".previous\n" - : : "a" (addr)); + " sam31\n" + " diag %0,%0,0x10\n" + "0: sam64\n" #else - asm volatile ( - " diag %0,%0,0x10\n" + " diag %0,%0,0x10\n" "0:\n" - ".section __ex_table,\"a\"\n" - " .align 4\n" - " .long 0b, 0b\n" - ".previous\n" - : : "a" (addr)); #endif + EX_TABLE(0b,0b) + : : "a" (addr)); } void show_mem(void) @@ -156,11 +147,10 @@ void __init paging_init(void) S390_lowcore.kernel_asce = pgdir_k; /* enable virtual mapping in kernel mode */ - __asm__ __volatile__(" LCTL 1,1,%0\n" - " LCTL 7,7,%0\n" - " LCTL 13,13,%0\n" - " SSM %1" - : : "m" (pgdir_k), "m" (ssm_mask)); + __ctl_load(pgdir_k, 1, 1); + __ctl_load(pgdir_k, 7, 7); + __ctl_load(pgdir_k, 13, 13); + __raw_local_irq_ssm(ssm_mask); local_flush_tlb(); return; @@ -241,11 +231,10 @@ void __init paging_init(void) S390_lowcore.kernel_asce = pgdir_k; /* enable virtual mapping in kernel mode */ - __asm__ __volatile__("lctlg 1,1,%0\n\t" - "lctlg 7,7,%0\n\t" - "lctlg 13,13,%0\n\t" - "ssm %1" - : :"m" (pgdir_k), "m" (ssm_mask)); + __ctl_load(pgdir_k, 1, 1); + __ctl_load(pgdir_k, 7, 7); + __ctl_load(pgdir_k, 13, 13); + __raw_local_irq_ssm(ssm_mask); local_flush_tlb(); diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index 149d9713eddf..450c68f1df05 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -18,7 +18,6 @@ #include <asm/timer.h> #include <asm/kgdb.h> -extern unsigned long wall_jiffies; struct sys_timer *sys_timer; /* Move this somewhere more sensible.. */ @@ -52,16 +51,10 @@ void do_gettimeofday(struct timeval *tv) { unsigned long seq; unsigned long usec, sec; - unsigned long lost; do { seq = read_seqbegin(&xtime_lock); usec = get_timer_offset(); - - lost = jiffies - wall_jiffies; - if (lost) - usec += lost * (1000000 / HZ); - sec = xtime.tv_sec; usec += xtime.tv_nsec / 1000; } while (read_seqretry(&xtime_lock, seq)); @@ -91,8 +84,7 @@ int do_settimeofday(struct timespec *tv) * wall time. Discover what correction gettimeofday() would have * made, and then undo it! */ - nsec -= 1000 * (get_timer_offset() + - (jiffies - wall_jiffies) * (1000000 / HZ)); + nsec -= 1000 * get_timer_offset(); wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); @@ -117,7 +109,7 @@ static long last_rtc_update; */ void handle_timer_tick(struct pt_regs *regs) { - do_timer(regs); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index c69fd603226a..68663b8f99ae 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -69,7 +69,7 @@ good_area: if (!(vma->vm_flags & VM_WRITE)) goto bad_area; } else { - if (!(vma->vm_flags & (VM_READ | VM_EXEC))) + if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) goto bad_area; } @@ -149,7 +149,7 @@ no_context: */ out_of_memory: up_read(&mm->mmap_sem); - if (current->pid == 1) { + if (is_init(current)) { yield(); down_read(&mm->mmap_sem); goto survive; diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c index b8162e59030e..9c4a38a8698c 100644 --- a/arch/sh64/kernel/time.c +++ b/arch/sh64/kernel/time.c @@ -107,8 +107,6 @@ #define TICK_SIZE (tick_nsec / 1000) -extern unsigned long wall_jiffies; - static unsigned long tmu_base, rtc_base; unsigned long cprc_base; @@ -194,13 +192,6 @@ void do_gettimeofday(struct timeval *tv) do { seq = read_seqbegin_irqsave(&xtime_lock, flags); usec = usecs_since_tick(); - { - unsigned long lost = jiffies - wall_jiffies; - - if (lost) - usec += lost * (1000000 / HZ); - } - sec = xtime.tv_sec; usec += xtime.tv_nsec / 1000; } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); @@ -229,8 +220,7 @@ int do_settimeofday(struct timespec *tv) * wall time. Discover what correction gettimeofday() would have * made, and then undo it! */ - nsec -= 1000 * (usecs_since_tick() + - (jiffies - wall_jiffies) * (1000000 / HZ)); + nsec -= 1000 * usecs_since_tick(); wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); @@ -298,7 +288,7 @@ static inline void do_timer_interrupt(int irq, struct pt_regs *regs) asm ("getcon cr62, %0" : "=r" (current_ctc)); ctc_last_interrupt = (unsigned long) current_ctc; - do_timer(regs); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif diff --git a/arch/sh64/mm/fault.c b/arch/sh64/mm/fault.c index f08d0eaf6497..8e2f6c28b739 100644 --- a/arch/sh64/mm/fault.c +++ b/arch/sh64/mm/fault.c @@ -277,7 +277,7 @@ bad_area: show_regs(regs); #endif } - if (tsk->pid == 1) { + if (is_init(tsk)) { panic("INIT had user mode bad_area\n"); } tsk->thread.address = address; @@ -319,14 +319,14 @@ no_context: * us unable to handle the page fault gracefully. */ out_of_memory: - if (current->pid == 1) { + if (is_init(current)) { panic("INIT out of memory\n"); yield(); goto survive; } printk("fault:Out of memory\n"); up_read(&mm->mmap_sem); - if (current->pid == 1) { + if (is_init(current)) { yield(); down_read(&mm->mmap_sem); goto survive; diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index bfd31aac2df3..edb6cc665f56 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -712,7 +712,7 @@ static irqreturn_t pcic_timer_handler (int irq, void *h, struct pt_regs *regs) { write_seqlock(&xtime_lock); /* Dummy, to show that we remember */ pcic_clear_clock_irq(); - do_timer(regs); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif @@ -765,8 +765,6 @@ static __inline__ unsigned long do_gettimeoffset(void) return count; } -extern unsigned long wall_jiffies; - static void pci_do_gettimeofday(struct timeval *tv) { unsigned long flags; @@ -775,26 +773,17 @@ static void pci_do_gettimeofday(struct timeval *tv) unsigned long max_ntp_tick = tick_usec - tickadj; do { - unsigned long lost; - seq = read_seqbegin_irqsave(&xtime_lock, flags); usec = do_gettimeoffset(); - lost = jiffies - wall_jiffies; /* * If time_adjust is negative then NTP is slowing the clock * so make sure not to go into next possible interval. * Better to lose some accuracy than have time go backwards.. */ - if (unlikely(time_adjust < 0)) { + if (unlikely(time_adjust < 0)) usec = min(usec, max_ntp_tick); - if (lost) - usec += lost * max_ntp_tick; - } - else if (unlikely(lost)) - usec += lost * tick_usec; - sec = xtime.tv_sec; usec += (xtime.tv_nsec / 1000); } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); @@ -819,8 +808,7 @@ static int pci_do_settimeofday(struct timespec *tv) * wall time. Discover what correction gettimeofday() would have * made, and then undo it! */ - tv->tv_nsec -= 1000 * (do_gettimeoffset() + - (jiffies - wall_jiffies) * (USEC_PER_SEC / HZ)); + tv->tv_nsec -= 1000 * do_gettimeoffset(); while (tv->tv_nsec < 0) { tv->tv_nsec += NSEC_PER_SEC; tv->tv_sec--; diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c index 845081b01267..e10dc831944d 100644 --- a/arch/sparc/kernel/time.c +++ b/arch/sparc/kernel/time.c @@ -43,8 +43,6 @@ #include <asm/pcic.h> #include <asm/of_device.h> -extern unsigned long wall_jiffies; - DEFINE_SPINLOCK(rtc_lock); enum sparc_clock_type sp_clock_typ; DEFINE_SPINLOCK(mostek_lock); @@ -128,7 +126,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs * regs) #endif clear_clock_irq(); - do_timer(regs); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif @@ -449,7 +447,7 @@ unsigned long long sched_clock(void) /* Ok, my cute asm atomicity trick doesn't work anymore. * There are just too many variables that need to be protected - * now (both members of xtime, wall_jiffies, et al.) + * now (both members of xtime, et al.) */ void do_gettimeofday(struct timeval *tv) { @@ -459,26 +457,17 @@ void do_gettimeofday(struct timeval *tv) unsigned long max_ntp_tick = tick_usec - tickadj; do { - unsigned long lost; - seq = read_seqbegin_irqsave(&xtime_lock, flags); usec = do_gettimeoffset(); - lost = jiffies - wall_jiffies; /* * If time_adjust is negative then NTP is slowing the clock * so make sure not to go into next possible interval. * Better to lose some accuracy than have time go backwards.. */ - if (unlikely(time_adjust < 0)) { + if (unlikely(time_adjust < 0)) usec = min(usec, max_ntp_tick); - if (lost) - usec += lost * max_ntp_tick; - } - else if (unlikely(lost)) - usec += lost * tick_usec; - sec = xtime.tv_sec; usec += (xtime.tv_nsec / 1000); } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); @@ -521,8 +510,7 @@ static int sbus_do_settimeofday(struct timespec *tv) * wall time. Discover what correction gettimeofday() would have * made, and then undo it! */ - nsec -= 1000 * (do_gettimeoffset() + - (jiffies - wall_jiffies) * (USEC_PER_SEC / HZ)); + nsec -= 1000 * do_gettimeoffset(); wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); diff --git a/arch/sparc/lib/copy_user.S b/arch/sparc/lib/copy_user.S index 577505b692ae..ef095b6c43b1 100644 --- a/arch/sparc/lib/copy_user.S +++ b/arch/sparc/lib/copy_user.S @@ -14,6 +14,7 @@ #include <asm/ptrace.h> #include <asm/asmmacro.h> #include <asm/page.h> +#include <asm/thread_info.h> /* Work around cpp -rob */ #define ALLOC #alloc @@ -366,6 +367,9 @@ fixupretl: blu 1f cmp %o1, %g1 bgeu 1f + ld [%g6 + TI_PREEMPT], %g1 + cmp %g1, 0 + bne 1f nop save %sp, -64, %sp mov %i0, %o0 diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index b0b4feeec098..00f6fc4aaaff 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -53,8 +53,6 @@ void __iomem *mstk48t02_regs = NULL; unsigned long ds1287_regs = 0UL; #endif -extern unsigned long wall_jiffies; - static void __iomem *mstk48t08_regs; static void __iomem *mstk48t59_regs; @@ -465,7 +463,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs * regs) profile_tick(CPU_PROFILING, regs); update_process_times(user_mode(regs)); #endif - do_timer(regs); + do_timer(1); /* Guarantee that the following sequences execute * uninterrupted. @@ -496,7 +494,7 @@ void timer_tick_interrupt(struct pt_regs *regs) { write_seqlock(&xtime_lock); - do_timer(regs); + do_timer(1); timer_check_rtc(); diff --git a/arch/sparc64/solaris/misc.c b/arch/sparc64/solaris/misc.c index 642541769a17..9c581328e76a 100644 --- a/arch/sparc64/solaris/misc.c +++ b/arch/sparc64/solaris/misc.c @@ -11,6 +11,7 @@ #include <linux/limits.h> #include <linux/mm.h> #include <linux/smp.h> +#include <linux/tty.h> #include <linux/mman.h> #include <linux/file.h> #include <linux/timex.h> @@ -422,7 +423,9 @@ asmlinkage int solaris_procids(int cmd, s32 pid, s32 pgid) Solaris setpgrp and setsid? */ ret = sys_setpgid(0, 0); if (ret) return ret; + mutex_lock(&tty_mutex); current->signal->tty = NULL; + mutex_unlock(&tty_mutex); return process_group(current); } case 2: /* getsid */ diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index 79610b5ce67e..773a134e7fdb 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -598,6 +598,11 @@ out: mconsole_reply(req, err_msg, err, 0); } +struct mconsole_output { + struct list_head list; + struct mc_request *req; +}; + static DEFINE_SPINLOCK(console_lock); static LIST_HEAD(clients); static char console_buf[MCONSOLE_MAX_DATA]; @@ -622,10 +627,10 @@ static void console_write(struct console *console, const char *string, return; list_for_each(ele, &clients){ - struct mconsole_entry *entry; + struct mconsole_output *entry; - entry = list_entry(ele, struct mconsole_entry, list); - mconsole_reply_len(&entry->request, console_buf, + entry = list_entry(ele, struct mconsole_output, list); + mconsole_reply_len(entry->req, console_buf, console_index, 0, 1); } @@ -649,10 +654,10 @@ late_initcall(mc_add_console); static void with_console(struct mc_request *req, void (*proc)(void *), void *arg) { - struct mconsole_entry entry; + struct mconsole_output entry; unsigned long flags; - entry.request = *req; + entry.req = req; list_add(&entry.list, &clients); spin_lock_irqsave(&console_lock, flags); diff --git a/arch/um/drivers/mconsole_user.c b/arch/um/drivers/mconsole_user.c index 5b2f5fe9e426..17068eb746c0 100644 --- a/arch/um/drivers/mconsole_user.c +++ b/arch/um/drivers/mconsole_user.c @@ -131,6 +131,10 @@ int mconsole_get_request(int fd, struct mc_request *req) int mconsole_reply_len(struct mc_request *req, const char *str, int total, int err, int more) { + /* XXX This is a stack consumption problem. It'd be nice to + * make it global and serialize access to it, but there are a + * ton of callers to this function. + */ struct mconsole_reply reply; int len, n; diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index 664c2e2fb820..300a54a6523e 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -119,11 +119,6 @@ static int uml_net_open(struct net_device *dev) goto out; } - if(!lp->have_mac){ - dev_ip_addr(dev, &lp->mac[2]); - set_ether_mac(dev, lp->mac); - } - lp->fd = (*lp->open)(&lp->user); if(lp->fd < 0){ err = lp->fd; @@ -287,6 +282,37 @@ void uml_net_user_timer_expire(unsigned long _conn) #endif } +static void setup_etheraddr(char *str, unsigned char *addr) +{ + char *end; + int i; + + if(str == NULL) + goto random; + + for(i=0;i<6;i++){ + addr[i] = simple_strtoul(str, &end, 16); + if((end == str) || + ((*end != ':') && (*end != ',') && (*end != '\0'))){ + printk(KERN_ERR + "setup_etheraddr: failed to parse '%s' " + "as an ethernet address\n", str); + goto random; + } + str = end + 1; + } + if(addr[0] & 1){ + printk(KERN_ERR + "Attempt to assign a broadcast ethernet address to a " + "device disallowed\n"); + goto random; + } + return; + +random: + random_ether_addr(addr); +} + static DEFINE_SPINLOCK(devices_lock); static LIST_HEAD(devices); @@ -322,15 +348,13 @@ static int eth_configure(int n, void *init, char *mac, list_add(&device->list, &devices); spin_unlock(&devices_lock); - if (setup_etheraddr(mac, device->mac)) - device->have_mac = 1; + setup_etheraddr(mac, device->mac); printk(KERN_INFO "Netdevice %d ", n); - if (device->have_mac) - printk("(%02x:%02x:%02x:%02x:%02x:%02x) ", - device->mac[0], device->mac[1], - device->mac[2], device->mac[3], - device->mac[4], device->mac[5]); + printk("(%02x:%02x:%02x:%02x:%02x:%02x) ", + device->mac[0], device->mac[1], + device->mac[2], device->mac[3], + device->mac[4], device->mac[5]); printk(": "); dev = alloc_etherdev(size); if (dev == NULL) { @@ -396,7 +420,6 @@ static int eth_configure(int n, void *init, char *mac, .dev = dev, .fd = -1, .mac = { 0xfe, 0xfd, 0x0, 0x0, 0x0, 0x0}, - .have_mac = device->have_mac, .protocol = transport->kern->protocol, .open = transport->user->open, .close = transport->user->close, @@ -411,14 +434,12 @@ static int eth_configure(int n, void *init, char *mac, init_timer(&lp->tl); spin_lock_init(&lp->lock); lp->tl.function = uml_net_user_timer_expire; - if (lp->have_mac) - memcpy(lp->mac, device->mac, sizeof(lp->mac)); + memcpy(lp->mac, device->mac, sizeof(lp->mac)); if (transport->user->init) (*transport->user->init)(&lp->user, dev); - if (device->have_mac) - set_ether_mac(dev, device->mac); + set_ether_mac(dev, device->mac); return 0; } @@ -747,47 +768,6 @@ static void close_devices(void) __uml_exitcall(close_devices); -int setup_etheraddr(char *str, unsigned char *addr) -{ - char *end; - int i; - - if(str == NULL) - return(0); - for(i=0;i<6;i++){ - addr[i] = simple_strtoul(str, &end, 16); - if((end == str) || - ((*end != ':') && (*end != ',') && (*end != '\0'))){ - printk(KERN_ERR - "setup_etheraddr: failed to parse '%s' " - "as an ethernet address\n", str); - return(0); - } - str = end + 1; - } - if(addr[0] & 1){ - printk(KERN_ERR - "Attempt to assign a broadcast ethernet address to a " - "device disallowed\n"); - return(0); - } - return(1); -} - -void dev_ip_addr(void *d, unsigned char *bin_buf) -{ - struct net_device *dev = d; - struct in_device *ip = dev->ip_ptr; - struct in_ifaddr *in; - - if((ip == NULL) || ((in = ip->ifa_list) == NULL)){ - printk(KERN_WARNING "dev_ip_addr - device not assigned an " - "IP address\n"); - return; - } - memcpy(bin_buf, &in->ifa_address, sizeof(in->ifa_address)); -} - struct sk_buff *ether_adjust_skb(struct sk_buff *skb, int extra) { if((skb != NULL) && (skb_tailroom(skb) < extra)){ @@ -825,7 +805,7 @@ int dev_netmask(void *d, void *m) struct net_device *dev = d; struct in_device *ip = dev->ip_ptr; struct in_ifaddr *in; - __u32 *mask_out = m; + __be32 *mask_out = m; if(ip == NULL) return(1); diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c index 107c5e43fa00..f3a3f8a29c7a 100644 --- a/arch/um/drivers/net_user.c +++ b/arch/um/drivers/net_user.c @@ -12,6 +12,7 @@ #include <string.h> #include <sys/socket.h> #include <sys/wait.h> +#include <sys/time.h> #include "user.h" #include "user_util.h" #include "kern_util.h" diff --git a/arch/um/drivers/null.c b/arch/um/drivers/null.c index 3683ed44315d..9016c68beee8 100644 --- a/arch/um/drivers/null.c +++ b/arch/um/drivers/null.c @@ -8,6 +8,7 @@ #include "chan_user.h" #include "os.h" +/* This address is used only as a unique identifer */ static int null_chan; static void *null_init(char *str, int device, const struct chan_opts *opts) diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c index ae9909415b9c..73b2bdd6d2d3 100644 --- a/arch/um/drivers/random.c +++ b/arch/um/drivers/random.c @@ -20,6 +20,10 @@ #define RNG_MISCDEV_MINOR 183 /* official */ +/* Changed at init time, in the non-modular case, and at module load + * time, in the module case. Presumably, the module subsystem + * protects against a module being loaded twice at the same time. + */ static int random_fd = -1; static int rng_dev_open (struct inode *inode, struct file *filp) diff --git a/arch/um/drivers/stderr_console.c b/arch/um/drivers/stderr_console.c index 6d2cf32a9e8f..911539293871 100644 --- a/arch/um/drivers/stderr_console.c +++ b/arch/um/drivers/stderr_console.c @@ -9,6 +9,8 @@ /* * Don't register by default -- as this registeres very early in the * boot process it becomes the default console. + * + * Initialized at init time. */ static int use_stderr_console = 0; diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index 5e44adb07051..e4bfcfe8550b 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -108,6 +108,7 @@ static int con_open(struct tty_struct *tty, struct file *filp) return line_open(vts, tty); } +/* Set in an initcall, checked in an exitcall */ static int con_init_done = 0; static const struct tty_operations console_ops = { diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 34085315aa57..fda4a3940698 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -668,18 +668,15 @@ static int ubd_add(int n) if(dev->file == NULL) goto out; - if (ubd_open_dev(dev)) - goto out; - err = ubd_file_size(dev, &dev->size); if(err < 0) - goto out_close; + goto out; dev->size = ROUND_BLOCK(dev->size); err = ubd_new_disk(MAJOR_NR, dev->size, n, &ubd_gendisk[n]); if(err) - goto out_close; + goto out; if(fake_major != MAJOR_NR) ubd_new_disk(fake_major, dev->size, n, @@ -691,8 +688,6 @@ static int ubd_add(int n) make_ide_entries(ubd_gendisk[n]->disk_name); err = 0; -out_close: - ubd_close(dev); out: return err; } @@ -986,8 +981,6 @@ static int prepare_request(struct request *req, struct io_thread_req *io_req) __u64 offset; int len; - if(req->rq_status == RQ_INACTIVE) return(1); - /* This should be impossible now */ if((rq_data_dir(req) == WRITE) && !dev->openflags.w){ printk("Write attempted on readonly ubd device %s\n", diff --git a/arch/um/include/net_kern.h b/arch/um/include/net_kern.h index 769fba43ee03..280459fb0b26 100644 --- a/arch/um/include/net_kern.h +++ b/arch/um/include/net_kern.h @@ -18,7 +18,6 @@ struct uml_net { struct platform_device pdev; int index; unsigned char mac[ETH_ALEN]; - int have_mac; }; struct uml_net_private { @@ -29,7 +28,6 @@ struct uml_net_private { struct net_device_stats stats; int fd; unsigned char mac[ETH_ALEN]; - int have_mac; unsigned short (*protocol)(struct sk_buff *); int (*open)(void *); void (*close)(int, void *); @@ -62,7 +60,6 @@ struct transport { extern struct net_device *ether_init(int); extern unsigned short ether_protocol(struct sk_buff *); -extern int setup_etheraddr(char *str, unsigned char *addr); extern struct sk_buff *ether_adjust_skb(struct sk_buff *skb, int extra); extern int tap_setup_common(char *str, char *type, char **dev_name, char **mac_out, char **gate_addr); @@ -70,14 +67,3 @@ extern void register_transport(struct transport *new); extern unsigned short eth_protocol(struct sk_buff *skb); #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/net_user.h b/arch/um/include/net_user.h index 47ef7cb49a8e..19f207cd70fe 100644 --- a/arch/um/include/net_user.h +++ b/arch/um/include/net_user.h @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -25,9 +25,8 @@ struct net_user_info { }; extern void ether_user_init(void *data, void *dev); -extern void dev_ip_addr(void *d, unsigned char *bin_buf); -extern void iter_addresses(void *d, void (*cb)(unsigned char *, - unsigned char *, void *), +extern void iter_addresses(void *d, void (*cb)(unsigned char *, + unsigned char *, void *), void *arg); extern void *get_output_buffer(int *len_out); @@ -52,14 +51,3 @@ extern char *split_if_spec(char *str, ...); extern int dev_netmask(void *d, void *m); #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/exitcode.c b/arch/um/kernel/exitcode.c index d21ebad666b4..8b7f2cdedf94 100644 --- a/arch/um/kernel/exitcode.c +++ b/arch/um/kernel/exitcode.c @@ -16,9 +16,13 @@ int uml_exitcode = 0; static int read_proc_exitcode(char *page, char **start, off_t off, int count, int *eof, void *data) { - int len; + int len, val; - len = sprintf(page, "%d\n", uml_exitcode); + /* Save uml_exitcode in a local so that we don't need to guarantee + * that sprintf accesses it atomically. + */ + val = uml_exitcode; + len = sprintf(page, "%d\n", val); len -= off; if(len <= off+count) *eof = 1; *start = page + off; diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c index 79c22707a637..4cd2ff546ef6 100644 --- a/arch/um/kernel/skas/mmu.c +++ b/arch/um/kernel/skas/mmu.c @@ -61,8 +61,10 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc, #endif *pte = mk_pte(virt_to_page(kernel), __pgprot(_PAGE_PRESENT)); - *pte = pte_mkexec(*pte); - *pte = pte_wrprotect(*pte); + /* This is wrong for the code page, but it doesn't matter since the + * stub is mapped by hand with the correct permissions. + */ + *pte = pte_mkwrite(*pte); return(0); out_pmd: diff --git a/arch/um/kernel/skas/process_kern.c b/arch/um/kernel/skas/process_kern.c deleted file mode 100644 index 0f3d5d084dc7..000000000000 --- a/arch/um/kernel/skas/process_kern.c +++ /dev/null @@ -1,484 +0,0 @@ -/* - * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com) - * Copyright 2003 PathScale, Inc. - * Licensed under the GPL - */ - -#include "linux/config.h" -#include "linux/kernel.h" -#include "linux/sched.h" -#include "linux/interrupt.h" -#include "linux/string.h" -#include "linux/mm.h" -#include "linux/slab.h" -#include "linux/utsname.h" -#include "linux/fs.h" -#include "linux/utime.h" -#include "linux/smp_lock.h" -#include "linux/module.h" -#include "linux/init.h" -#include "linux/capability.h" -#include "linux/vmalloc.h" -#include "linux/spinlock.h" -#include "linux/proc_fs.h" -#include "linux/ptrace.h" -#include "linux/random.h" -#include "linux/personality.h" -#include "asm/unistd.h" -#include "asm/mman.h" -#include "asm/segment.h" -#include "asm/stat.h" -#include "asm/pgtable.h" -#include "asm/processor.h" -#include "asm/tlbflush.h" -#include "asm/uaccess.h" -#include "asm/user.h" -#include "user_util.h" -#include "kern_util.h" -#include "kern.h" -#include "signal_kern.h" -#include "init.h" -#include "irq_user.h" -#include "mem_user.h" -#include "tlb.h" -#include "frame_kern.h" -#include "sigcontext.h" -#include "os.h" -#include "mode.h" -#include "mode_kern.h" -#include "choose-mode.h" - -/* This is a per-cpu array. A processor only modifies its entry and it only - * cares about its entry, so it's OK if another processor is modifying its - * entry. - */ -struct cpu_task cpu_tasks[NR_CPUS] = { [0 ... NR_CPUS - 1] = { -1, NULL } }; - -int external_pid(void *t) -{ - struct task_struct *task = t ? t : current; - - return(CHOOSE_MODE_PROC(external_pid_tt, external_pid_skas, task)); -} - -int pid_to_processor_id(int pid) -{ - int i; - - for(i = 0; i < ncpus; i++){ - if(cpu_tasks[i].pid == pid) return(i); - } - return(-1); -} - -void free_stack(unsigned long stack, int order) -{ - free_pages(stack, order); -} - -unsigned long alloc_stack(int order, int atomic) -{ - unsigned long page; - gfp_t flags = GFP_KERNEL; - - if (atomic) - flags = GFP_ATOMIC; - page = __get_free_pages(flags, order); - if(page == 0) - return(0); - stack_protections(page); - return(page); -} - -int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) -{ - int pid; - - current->thread.request.u.thread.proc = fn; - current->thread.request.u.thread.arg = arg; - pid = do_fork(CLONE_VM | CLONE_UNTRACED | flags, 0, - ¤t->thread.regs, 0, NULL, NULL); - if(pid < 0) - panic("do_fork failed in kernel_thread, errno = %d", pid); - return(pid); -} - -void set_current(void *t) -{ - struct task_struct *task = t; - - cpu_tasks[task_thread_info(task)->cpu] = ((struct cpu_task) - { external_pid(task), task }); -} - -void *_switch_to(void *prev, void *next, void *last) -{ - struct task_struct *from = prev; - struct task_struct *to= next; - - to->thread.prev_sched = from; - set_current(to); - - do { - current->thread.saved_task = NULL ; - CHOOSE_MODE_PROC(switch_to_tt, switch_to_skas, prev, next); - if(current->thread.saved_task) - show_regs(&(current->thread.regs)); - next= current->thread.saved_task; - prev= current; - } while(current->thread.saved_task); - - return(current->thread.prev_sched); - -} - -void interrupt_end(void) -{ - if(need_resched()) schedule(); - if(test_tsk_thread_flag(current, TIF_SIGPENDING)) do_signal(); -} - -void release_thread(struct task_struct *task) -{ - CHOOSE_MODE(release_thread_tt(task), release_thread_skas(task)); -} - -void exit_thread(void) -{ - unprotect_stack((unsigned long) current_thread); -} - -void *get_current(void) -{ - return(current); -} - -int copy_thread(int nr, unsigned long clone_flags, unsigned long sp, - unsigned long stack_top, struct task_struct * p, - struct pt_regs *regs) -{ - int ret; - - p->thread = (struct thread_struct) INIT_THREAD; - ret = CHOOSE_MODE_PROC(copy_thread_tt, copy_thread_skas, nr, - clone_flags, sp, stack_top, p, regs); - - if (ret || !current->thread.forking) - goto out; - - clear_flushed_tls(p); - - /* - * Set a new TLS for the child thread? - */ - if (clone_flags & CLONE_SETTLS) - ret = arch_copy_tls(p); - -out: - return ret; -} - -void initial_thread_cb(void (*proc)(void *), void *arg) -{ - int save_kmalloc_ok = kmalloc_ok; - - kmalloc_ok = 0; - CHOOSE_MODE_PROC(initial_thread_cb_tt, initial_thread_cb_skas, proc, - arg); - kmalloc_ok = save_kmalloc_ok; -} - -unsigned long stack_sp(unsigned long page) -{ - return(page + PAGE_SIZE - sizeof(void *)); -} - -int current_pid(void) -{ - return(current->pid); -} - -void default_idle(void) -{ - CHOOSE_MODE(uml_idle_timer(), (void) 0); - - while(1){ - /* endless idle loop with no priority at all */ - - /* - * although we are an idle CPU, we do not want to - * get into the scheduler unnecessarily. - */ - if(need_resched()) - schedule(); - - idle_sleep(10); - } -} - -void cpu_idle(void) -{ - CHOOSE_MODE(init_idle_tt(), init_idle_skas()); -} - -int page_size(void) -{ - return(PAGE_SIZE); -} - -void *um_virt_to_phys(struct task_struct *task, unsigned long addr, - pte_t *pte_out) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - pte_t ptent; - - if(task->mm == NULL) - return(ERR_PTR(-EINVAL)); - pgd = pgd_offset(task->mm, addr); - if(!pgd_present(*pgd)) - return(ERR_PTR(-EINVAL)); - - pud = pud_offset(pgd, addr); - if(!pud_present(*pud)) - return(ERR_PTR(-EINVAL)); - - pmd = pmd_offset(pud, addr); - if(!pmd_present(*pmd)) - return(ERR_PTR(-EINVAL)); - - pte = pte_offset_kernel(pmd, addr); - ptent = *pte; - if(!pte_present(ptent)) - return(ERR_PTR(-EINVAL)); - - if(pte_out != NULL) - *pte_out = ptent; - return((void *) (pte_val(ptent) & PAGE_MASK) + (addr & ~PAGE_MASK)); -} - -char *current_cmd(void) -{ -#if defined(CONFIG_SMP) || defined(CONFIG_HIGHMEM) - return("(Unknown)"); -#else - void *addr = um_virt_to_phys(current, current->mm->arg_start, NULL); - return IS_ERR(addr) ? "(Unknown)": __va((unsigned long) addr); -#endif -} - -void force_sigbus(void) -{ - printk(KERN_ERR "Killing pid %d because of a lack of memory\n", - current->pid); - lock_kernel(); - sigaddset(¤t->pending.signal, SIGBUS); - recalc_sigpending(); - current->flags |= PF_SIGNALED; - do_exit(SIGBUS | 0x80); -} - -void dump_thread(struct pt_regs *regs, struct user *u) -{ -} - -void enable_hlt(void) -{ - panic("enable_hlt"); -} - -EXPORT_SYMBOL(enable_hlt); - -void disable_hlt(void) -{ - panic("disable_hlt"); -} - -EXPORT_SYMBOL(disable_hlt); - -void *um_kmalloc(int size) -{ - return kmalloc(size, GFP_KERNEL); -} - -void *um_kmalloc_atomic(int size) -{ - return kmalloc(size, GFP_ATOMIC); -} - -void *um_vmalloc(int size) -{ - return vmalloc(size); -} - -void *um_vmalloc_atomic(int size) -{ - return __vmalloc(size, GFP_ATOMIC | __GFP_HIGHMEM, PAGE_KERNEL); -} - -int __cant_sleep(void) { - return in_atomic() || irqs_disabled() || in_interrupt(); - /* Is in_interrupt() really needed? */ -} - -unsigned long get_fault_addr(void) -{ - return((unsigned long) current->thread.fault_addr); -} - -EXPORT_SYMBOL(get_fault_addr); - -void not_implemented(void) -{ - printk(KERN_DEBUG "Something isn't implemented in here\n"); -} - -EXPORT_SYMBOL(not_implemented); - -int user_context(unsigned long sp) -{ - unsigned long stack; - - stack = sp & (PAGE_MASK << CONFIG_KERNEL_STACK_ORDER); - return(stack != (unsigned long) current_thread); -} - -extern exitcall_t __uml_exitcall_begin, __uml_exitcall_end; - -void do_uml_exitcalls(void) -{ - exitcall_t *call; - - call = &__uml_exitcall_end; - while (--call >= &__uml_exitcall_begin) - (*call)(); -} - -char *uml_strdup(char *string) -{ - return kstrdup(string, GFP_KERNEL); -} - -int copy_to_user_proc(void __user *to, void *from, int size) -{ - return(copy_to_user(to, from, size)); -} - -int copy_from_user_proc(void *to, void __user *from, int size) -{ - return(copy_from_user(to, from, size)); -} - -int clear_user_proc(void __user *buf, int size) -{ - return(clear_user(buf, size)); -} - -int strlen_user_proc(char __user *str) -{ - return(strlen_user(str)); -} - -int smp_sigio_handler(void) -{ -#ifdef CONFIG_SMP - int cpu = current_thread->cpu; - IPI_handler(cpu); - if(cpu != 0) - return(1); -#endif - return(0); -} - -int cpu(void) -{ - return(current_thread->cpu); -} - -static atomic_t using_sysemu = ATOMIC_INIT(0); -int sysemu_supported; - -void set_using_sysemu(int value) -{ - if (value > sysemu_supported) - return; - atomic_set(&using_sysemu, value); -} - -int get_using_sysemu(void) -{ - return atomic_read(&using_sysemu); -} - -static int proc_read_sysemu(char *buf, char **start, off_t offset, int size,int *eof, void *data) -{ - if (snprintf(buf, size, "%d\n", get_using_sysemu()) < size) /*No overflow*/ - *eof = 1; - - return strlen(buf); -} - -static int proc_write_sysemu(struct file *file,const char __user *buf, unsigned long count,void *data) -{ - char tmp[2]; - - if (copy_from_user(tmp, buf, 1)) - return -EFAULT; - - if (tmp[0] >= '0' && tmp[0] <= '2') - set_using_sysemu(tmp[0] - '0'); - return count; /*We use the first char, but pretend to write everything*/ -} - -int __init make_proc_sysemu(void) -{ - struct proc_dir_entry *ent; - if (!sysemu_supported) - return 0; - - ent = create_proc_entry("sysemu", 0600, &proc_root); - - if (ent == NULL) - { - printk(KERN_WARNING "Failed to register /proc/sysemu\n"); - return(0); - } - - ent->read_proc = proc_read_sysemu; - ent->write_proc = proc_write_sysemu; - - return 0; -} - -late_initcall(make_proc_sysemu); - -int singlestepping(void * t) -{ - struct task_struct *task = t ? t : current; - - if ( ! (task->ptrace & PT_DTRACE) ) - return(0); - - if (task->thread.singlestep_syscall) - return(1); - - return 2; -} - -/* - * Only x86 and x86_64 have an arch_align_stack(). - * All other arches have "#define arch_align_stack(x) (x)" - * in their asm/system.h - * As this is included in UML from asm-um/system-generic.h, - * we can use it to behave as the subarch does. - */ -#ifndef arch_align_stack -unsigned long arch_align_stack(unsigned long sp) -{ - if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) - sp -= get_random_int() % 8192; - return sp & ~0xf; -} -#endif diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c index 820affbf3e16..a92965f8f9cd 100644 --- a/arch/um/kernel/time.c +++ b/arch/um/kernel/time.c @@ -93,7 +93,7 @@ irqreturn_t um_timer(int irq, void *dev, struct pt_regs *regs) write_seqlock_irqsave(&xtime_lock, flags); - do_timer(regs); + do_timer(1); nsecs = get_time(); xtime.tv_sec = nsecs / NSEC_PER_SEC; diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c index 61a23fff4395..c7b195c7e51f 100644 --- a/arch/um/kernel/trap.c +++ b/arch/um/kernel/trap.c @@ -120,7 +120,7 @@ out_nosemaphore: * us unable to handle the page fault gracefully. */ out_of_memory: - if (current->pid == 1) { + if (is_init(current)) { up_read(&mm->mmap_sem); yield(); down_read(&mm->mmap_sem); diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c index b170b4704dc4..4203681e508d 100644 --- a/arch/um/os-Linux/mem.c +++ b/arch/um/os-Linux/mem.c @@ -132,6 +132,9 @@ err: else if(found < 0) printf("read returned errno %d\n", -found); +out: + close(fd); + return; found: @@ -141,11 +144,12 @@ found: if(strncmp(buf, "tmpfs", strlen("tmpfs"))){ printf("not tmpfs\n"); - return; + goto out; } printf("OK\n"); default_tmpdir = "/dev/shm"; + goto out; } /* diff --git a/arch/v850/kernel/memcons.c b/arch/v850/kernel/memcons.c index 491614c435cd..815f8a43926f 100644 --- a/arch/v850/kernel/memcons.c +++ b/arch/v850/kernel/memcons.c @@ -30,7 +30,7 @@ static DEFINE_SPINLOCK(memcons_lock); static size_t write (const char *buf, size_t len) { - int flags; + unsigned long flags; char *point; spin_lock_irqsave (memcons_lock, flags); diff --git a/arch/v850/kernel/rte_cb_leds.c b/arch/v850/kernel/rte_cb_leds.c index f654088b2760..996bd4f33ecb 100644 --- a/arch/v850/kernel/rte_cb_leds.c +++ b/arch/v850/kernel/rte_cb_leds.c @@ -42,7 +42,7 @@ do { \ len = LED_NUM_DIGITS - pos; \ \ if (len > 0) { \ - int _flags; \ + unsigned long _flags; \ const char *_end = buf + len; \ img_decl = &leds_image[pos]; \ \ diff --git a/arch/v850/kernel/rte_mb_a_pci.c b/arch/v850/kernel/rte_mb_a_pci.c index f36b778f1432..35213fa9f7d8 100644 --- a/arch/v850/kernel/rte_mb_a_pci.c +++ b/arch/v850/kernel/rte_mb_a_pci.c @@ -365,7 +365,7 @@ static DEFINE_SPINLOCK(mb_sram_lock); static void *alloc_mb_sram (size_t size) { struct mb_sram_free_area *prev, *fa; - int flags; + unsigned long flags; void *mem = 0; spin_lock_irqsave (mb_sram_lock, flags); @@ -406,7 +406,7 @@ static void *alloc_mb_sram (size_t size) static void free_mb_sram (void *mem, size_t size) { struct mb_sram_free_area *prev, *fa, *new_fa; - int flags; + unsigned long flags; void *end = mem + size; spin_lock_irqsave (mb_sram_lock, flags); @@ -517,7 +517,7 @@ static DEFINE_SPINLOCK(dma_mappings_lock); static struct dma_mapping *new_dma_mapping (size_t size) { - int flags; + unsigned long flags; struct dma_mapping *mapping; void *mb_sram_block = alloc_mb_sram (size); @@ -575,7 +575,7 @@ static struct dma_mapping *new_dma_mapping (size_t size) static struct dma_mapping *find_dma_mapping (void *mb_sram_addr) { - int flags; + unsigned long flags; struct dma_mapping *mapping; spin_lock_irqsave (dma_mappings_lock, flags); @@ -592,7 +592,7 @@ static struct dma_mapping *find_dma_mapping (void *mb_sram_addr) static struct dma_mapping *deactivate_dma_mapping (void *mb_sram_addr) { - int flags; + unsigned long flags; struct dma_mapping *mapping, *prev; spin_lock_irqsave (dma_mappings_lock, flags); @@ -622,7 +622,7 @@ static struct dma_mapping *deactivate_dma_mapping (void *mb_sram_addr) static inline void free_dma_mapping (struct dma_mapping *mapping) { - int flags; + unsigned long flags; free_mb_sram (mapping->mb_sram_addr, mapping->size); diff --git a/arch/v850/kernel/time.c b/arch/v850/kernel/time.c index a0b46695f186..f4d1a4d3cdc2 100644 --- a/arch/v850/kernel/time.c +++ b/arch/v850/kernel/time.c @@ -51,7 +51,7 @@ static irqreturn_t timer_interrupt (int irq, void *dummy, struct pt_regs *regs) if (mach_tick) mach_tick (); - do_timer (regs); + do_timer (1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 32ae1378f35c..b87a19f0d584 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -367,6 +367,10 @@ config ARCH_FLATMEM_ENABLE source "mm/Kconfig" +config MEMORY_HOTPLUG_RESERVE + def_bool y + depends on (MEMORY_HOTPLUG && DISCONTIGMEM) + config HAVE_ARCH_EARLY_PFN_TO_NID def_bool y depends on NUMA diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index 647610ecb580..4844b543bed0 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -1,11 +1,12 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-git5 -# Tue Sep 26 09:30:47 2006 +# Linux kernel version: 2.6.18-git7 +# Wed Sep 27 21:53:10 2006 # CONFIG_X86_64=y CONFIG_64BIT=y CONFIG_X86=y +CONFIG_ZONE_DMA32=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y @@ -179,6 +180,7 @@ CONFIG_GENERIC_PENDING_IRQ=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set CONFIG_SOFTWARE_SUSPEND=y CONFIG_PM_STD_PARTITION="" CONFIG_SUSPEND_SMP=y @@ -251,6 +253,7 @@ CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCIEPORTBUS=y CONFIG_PCI_MSI=y +# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set # @@ -1458,6 +1461,7 @@ CONFIG_KPROBES=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_KERNEL=y diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index 20e88f4b564b..b8d53dfa9931 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -152,6 +152,21 @@ static void __init MP_bus_info (struct mpc_config_bus *m) } } +static int bad_ioapic(unsigned long address) +{ + if (nr_ioapics >= MAX_IO_APICS) { + printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " + "(found %d)\n", MAX_IO_APICS, nr_ioapics); + panic("Recompile kernel with bigger MAX_IO_APICS!\n"); + } + if (!address) { + printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" + " found in table, skipping!\n"); + return 1; + } + return 0; +} + static void __init MP_ioapic_info (struct mpc_config_ioapic *m) { if (!(m->mpc_flags & MPC_APIC_USABLE)) @@ -159,16 +174,10 @@ static void __init MP_ioapic_info (struct mpc_config_ioapic *m) printk("I/O APIC #%d at 0x%X.\n", m->mpc_apicid, m->mpc_apicaddr); - if (nr_ioapics >= MAX_IO_APICS) { - printk(KERN_ERR "Max # of I/O APICs (%d) exceeded (found %d).\n", - MAX_IO_APICS, nr_ioapics); - panic("Recompile kernel with bigger MAX_IO_APICS!.\n"); - } - if (!m->mpc_apicaddr) { - printk(KERN_ERR "WARNING: bogus zero I/O APIC address" - " found in MP table, skipping!\n"); + + if (bad_ioapic(m->mpc_apicaddr)) return; - } + mp_ioapics[nr_ioapics] = *m; nr_ioapics++; } @@ -647,16 +656,8 @@ void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base) { int idx = 0; - if (nr_ioapics >= MAX_IO_APICS) { - printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " - "(found %d)\n", MAX_IO_APICS, nr_ioapics); - panic("Recompile kernel with bigger MAX_IO_APICS!\n"); - } - if (!address) { - printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" - " found in MADT table, skipping!\n"); + if (bad_ioapic(address)) return; - } idx = nr_ioapics++; diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 4d6fb047952e..7af9cb3e2d99 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -28,6 +28,10 @@ #include <asm/mce.h> #include <asm/intel_arch_perfmon.h> +int unknown_nmi_panic; +int nmi_watchdog_enabled; +int panic_on_unrecovered_nmi; + /* perfctr_nmi_owner tracks the ownership of the perfctr registers: * evtsel_nmi_owner tracks the ownership of the event selection * - different performance counters/ event selection may be reserved for diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c index 4dcb671bd19f..f8d857453f8a 100644 --- a/arch/x86_64/kernel/pci-dma.c +++ b/arch/x86_64/kernel/pci-dma.c @@ -170,8 +170,20 @@ void dma_free_coherent(struct device *dev, size_t size, } EXPORT_SYMBOL(dma_free_coherent); +static int forbid_dac __read_mostly; + int dma_supported(struct device *dev, u64 mask) { +#ifdef CONFIG_PCI + if (mask > 0xffffffff && forbid_dac > 0) { + + + + printk(KERN_INFO "PCI: Disallowing DAC for device %s\n", dev->bus_id); + return 0; + } +#endif + if (dma_ops->dma_supported) return dma_ops->dma_supported(dev, mask); @@ -231,57 +243,64 @@ EXPORT_SYMBOL(dma_set_mask); allowed overwrite iommu off workarounds for specific chipsets. soft Use software bounce buffering (default for Intel machines) noaperture Don't touch the aperture for AGP. + allowdac Allow DMA >4GB + nodac Forbid DMA >4GB + panic Force panic when IOMMU overflows */ __init int iommu_setup(char *p) { - iommu_merge = 1; + iommu_merge = 1; if (!p) return -EINVAL; - while (*p) { - if (!strncmp(p,"off",3)) - no_iommu = 1; - /* gart_parse_options has more force support */ - if (!strncmp(p,"force",5)) - force_iommu = 1; - if (!strncmp(p,"noforce",7)) { - iommu_merge = 0; - force_iommu = 0; - } - - if (!strncmp(p, "biomerge",8)) { - iommu_bio_merge = 4096; - iommu_merge = 1; - force_iommu = 1; - } - if (!strncmp(p, "panic",5)) - panic_on_overflow = 1; - if (!strncmp(p, "nopanic",7)) - panic_on_overflow = 0; - if (!strncmp(p, "merge",5)) { - iommu_merge = 1; - force_iommu = 1; - } - if (!strncmp(p, "nomerge",7)) - iommu_merge = 0; - if (!strncmp(p, "forcesac",8)) - iommu_sac_force = 1; + while (*p) { + if (!strncmp(p,"off",3)) + no_iommu = 1; + /* gart_parse_options has more force support */ + if (!strncmp(p,"force",5)) + force_iommu = 1; + if (!strncmp(p,"noforce",7)) { + iommu_merge = 0; + force_iommu = 0; + } + + if (!strncmp(p, "biomerge",8)) { + iommu_bio_merge = 4096; + iommu_merge = 1; + force_iommu = 1; + } + if (!strncmp(p, "panic",5)) + panic_on_overflow = 1; + if (!strncmp(p, "nopanic",7)) + panic_on_overflow = 0; + if (!strncmp(p, "merge",5)) { + iommu_merge = 1; + force_iommu = 1; + } + if (!strncmp(p, "nomerge",7)) + iommu_merge = 0; + if (!strncmp(p, "forcesac",8)) + iommu_sac_force = 1; + if (!strncmp(p, "allowdac", 8)) + forbid_dac = 0; + if (!strncmp(p, "nodac", 5)) + forbid_dac = -1; #ifdef CONFIG_SWIOTLB - if (!strncmp(p, "soft",4)) - swiotlb = 1; + if (!strncmp(p, "soft",4)) + swiotlb = 1; #endif #ifdef CONFIG_IOMMU - gart_parse_options(p); + gart_parse_options(p); #endif - p += strcspn(p, ","); - if (*p == ',') - ++p; - } - return 0; + p += strcspn(p, ","); + if (*p == ',') + ++p; + } + return 0; } early_param("iommu", iommu_setup); diff --git a/arch/x86_64/kernel/pci-swiotlb.c b/arch/x86_64/kernel/pci-swiotlb.c index 6a55f87ba97f..697f0aa794b9 100644 --- a/arch/x86_64/kernel/pci-swiotlb.c +++ b/arch/x86_64/kernel/pci-swiotlb.c @@ -3,7 +3,8 @@ #include <linux/pci.h> #include <linux/cache.h> #include <linux/module.h> -#include <asm/dma-mapping.h> +#include <linux/dma-mapping.h> + #include <asm/proto.h> #include <asm/swiotlb.h> #include <asm/dma.h> diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 0b00bb2ea576..fc944b5e8f4a 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -123,9 +123,6 @@ struct resource standard_io_resources[] = { .flags = IORESOURCE_BUSY | IORESOURCE_IO } }; -#define STANDARD_IO_RESOURCES \ - (sizeof standard_io_resources / sizeof standard_io_resources[0]) - #define IORESOURCE_RAM (IORESOURCE_BUSY | IORESOURCE_MEM) struct resource data_resource = { @@ -172,9 +169,6 @@ static struct resource adapter_rom_resources[] = { .flags = IORESOURCE_ROM } }; -#define ADAPTER_ROM_RESOURCES \ - (sizeof adapter_rom_resources / sizeof adapter_rom_resources[0]) - static struct resource video_rom_resource = { .name = "Video ROM", .start = 0xc0000, @@ -245,7 +239,8 @@ static void __init probe_roms(void) } /* check for adapter roms on 2k boundaries */ - for (i = 0; i < ADAPTER_ROM_RESOURCES && start < upper; start += 2048) { + for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; + start += 2048) { rom = isa_bus_to_virt(start); if (!romsignature(rom)) continue; @@ -537,7 +532,7 @@ void __init setup_arch(char **cmdline_p) { unsigned i; /* request I/O space for devices used on all i[345]86 PCs */ - for (i = 0; i < STANDARD_IO_RESOURCES; i++) + for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) request_resource(&ioport_resource, &standard_io_resources[i]); } diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 1c255ee76e7c..557e92af7bea 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -77,7 +77,6 @@ unsigned long long monotonic_base; struct vxtime_data __vxtime __section_vxtime; /* for vsyscalls */ volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES; -unsigned long __wall_jiffies __section_wall_jiffies = INITIAL_JIFFIES; struct timespec __xtime __section_xtime; struct timezone __sys_tz __section_sys_tz; @@ -119,7 +118,7 @@ unsigned int (*do_gettimeoffset)(void) = do_gettimeoffset_tsc; void do_gettimeofday(struct timeval *tv) { - unsigned long seq, t; + unsigned long seq; unsigned int sec, usec; do { @@ -136,10 +135,7 @@ void do_gettimeofday(struct timeval *tv) be found. Note when you fix it here you need to do the same in arch/x86_64/kernel/vsyscall.c and export all needed variables in vmlinux.lds. -AK */ - - t = (jiffies - wall_jiffies) * USEC_PER_TICK + - do_gettimeoffset(); - usec += t; + usec += do_gettimeoffset(); } while (read_seqretry(&xtime_lock, seq)); @@ -165,8 +161,7 @@ int do_settimeofday(struct timespec *tv) write_seqlock_irq(&xtime_lock); - nsec -= do_gettimeoffset() * NSEC_PER_USEC + - (jiffies - wall_jiffies) * NSEC_PER_TICK; + nsec -= do_gettimeoffset() * NSEC_PER_USEC; wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); @@ -415,16 +410,16 @@ void main_timer_handler(struct pt_regs *regs) (((long) offset << US_SCALE) / vxtime.tsc_quot) - 1; } - if (lost > 0) { + if (lost > 0) handle_lost_ticks(lost, regs); - jiffies += lost; - } + else + lost = 0; /* * Do the timer stuff. */ - do_timer(regs); + do_timer(lost + 1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif @@ -1071,7 +1066,6 @@ static int timer_resume(struct sys_device *dev) vxtime.last_tsc = get_cycles_sync(); write_sequnlock_irqrestore(&xtime_lock,flags); jiffies += sleep_length; - wall_jiffies += sleep_length; monotonic_base += sleep_length * (NSEC_PER_SEC/HZ); touch_softlockup_watchdog(); return 0; diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S index d0564f1bcb0b..b9df2ab6529f 100644 --- a/arch/x86_64/kernel/vmlinux.lds.S +++ b/arch/x86_64/kernel/vmlinux.lds.S @@ -67,13 +67,6 @@ SECTIONS _edata = .; /* End of data section */ - __bss_start = .; /* BSS */ - .bss : AT(ADDR(.bss) - LOAD_OFFSET) { - *(.bss.page_aligned) - *(.bss) - } - __bss_stop = .; - . = ALIGN(PAGE_SIZE); . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { @@ -108,9 +101,6 @@ SECTIONS .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) } vgetcpu_mode = VVIRT(.vgetcpu_mode); - .wall_jiffies : AT(VLOAD(.wall_jiffies)) { *(.wall_jiffies) } - wall_jiffies = VVIRT(.wall_jiffies); - .sys_tz : AT(VLOAD(.sys_tz)) { *(.sys_tz) } sys_tz = VVIRT(.sys_tz); @@ -229,6 +219,13 @@ SECTIONS . = ALIGN(4096); __nosave_end = .; + __bss_start = .; /* BSS */ + .bss : AT(ADDR(.bss) - LOAD_OFFSET) { + *(.bss.page_aligned) + *(.bss) + } + __bss_stop = .; + _end = . ; /* Sections to be discarded */ diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86_64/kernel/vsyscall.c index ac48c3857ddb..a98b460af6a1 100644 --- a/arch/x86_64/kernel/vsyscall.c +++ b/arch/x86_64/kernel/vsyscall.c @@ -66,8 +66,7 @@ static __always_inline void do_vgettimeofday(struct timeval * tv) sequence = read_seqbegin(&__xtime_lock); sec = __xtime.tv_sec; - usec = (__xtime.tv_nsec / 1000) + - (__jiffies - __wall_jiffies) * (1000000 / HZ); + usec = __xtime.tv_nsec / 1000; if (__vxtime.mode != VXTIME_HPET) { t = get_cycles_sync(); @@ -155,8 +154,8 @@ vgetcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache) We do this here because otherwise user space would do it on its own in a likely inferior way (no access to jiffies). If you don't like it pass NULL. */ - if (tcache && tcache->t0 == (j = __jiffies)) { - p = tcache->t1; + if (tcache && tcache->blob[0] == (j = __jiffies)) { + p = tcache->blob[1]; } else if (__vgetcpu_mode == VGETCPU_RDTSCP) { /* Load per CPU data from RDTSCP */ rdtscp(dummy, dummy, p); @@ -165,8 +164,8 @@ vgetcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache) asm("lsl %1,%0" : "=r" (p) : "r" (__PER_CPU_SEG)); } if (tcache) { - tcache->t0 = j; - tcache->t1 = p; + tcache->blob[0] = j; + tcache->blob[1] = p; } if (cpu) *cpu = p & 0xfff; diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c index 1a17b0733ab5..3751b4788e28 100644 --- a/arch/x86_64/mm/fault.c +++ b/arch/x86_64/mm/fault.c @@ -244,7 +244,7 @@ static int is_errata93(struct pt_regs *regs, unsigned long address) int unhandled_signal(struct task_struct *tsk, int sig) { - if (tsk->pid == 1) + if (is_init(tsk)) return 1; if (tsk->ptrace & PT_PTRACED) return 0; @@ -464,7 +464,7 @@ good_area: case PF_PROT: /* read, present */ goto bad_area; case 0: /* read, not present */ - if (!(vma->vm_flags & (VM_READ | VM_EXEC))) + if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) goto bad_area; } @@ -580,7 +580,7 @@ no_context: */ out_of_memory: up_read(&mm->mmap_sem); - if (current->pid == 1) { + if (is_init(current)) { yield(); goto again; } diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index 3e16fe08150e..19c72520a868 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -463,19 +463,6 @@ void online_page(struct page *page) #ifdef CONFIG_MEMORY_HOTPLUG /* - * XXX: memory_add_physaddr_to_nid() is to find node id from physical address - * via probe interface of sysfs. If acpi notifies hot-add event, then it - * can tell node id by searching dsdt. But, probe interface doesn't have - * node id. So, return 0 as node id at this time. - */ -#ifdef CONFIG_NUMA -int memory_add_physaddr_to_nid(u64 start) -{ - return 0; -} -#endif - -/* * Memory is added always to NORMAL zone. This means you will never get * additional DMA/DMA32 memory. */ @@ -487,12 +474,12 @@ int arch_add_memory(int nid, u64 start, u64 size) unsigned long nr_pages = size >> PAGE_SHIFT; int ret; + init_memory_mapping(start, (start + size -1)); + ret = __add_pages(zone, start_pfn, nr_pages); if (ret) goto error; - init_memory_mapping(start, (start + size -1)); - return ret; error: printk("%s: Problem encountered in __add_pages!\n", __func__); @@ -506,7 +493,24 @@ int remove_memory(u64 start, u64 size) } EXPORT_SYMBOL_GPL(remove_memory); -#else /* CONFIG_MEMORY_HOTPLUG */ +#ifndef CONFIG_ACPI_NUMA +int memory_add_physaddr_to_nid(u64 start) +{ + return 0; +} +EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); +#endif + +#ifndef CONFIG_ACPI_NUMA +int memory_add_physaddr_to_nid(u64 start) +{ + return 0; +} +#endif + +#endif /* CONFIG_MEMORY_HOTPLUG */ + +#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE /* * Memory Hotadd without sparsemem. The mem_maps have been allocated in advance, * just online the pages. @@ -532,7 +536,7 @@ int __add_pages(struct zone *z, unsigned long start_pfn, unsigned long nr_pages) } return err; } -#endif /* CONFIG_MEMORY_HOTPLUG */ +#endif static struct kcore_list kcore_mem, kcore_vmalloc, kcore_kernel, kcore_modules, kcore_vsyscall; diff --git a/arch/x86_64/mm/ioremap.c b/arch/x86_64/mm/ioremap.c index 45d7d823c3b8..c6e5e8d401a4 100644 --- a/arch/x86_64/mm/ioremap.c +++ b/arch/x86_64/mm/ioremap.c @@ -12,117 +12,16 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/module.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/pgalloc.h> #include <asm/fixmap.h> -#include <asm/cacheflush.h> #include <asm/tlbflush.h> +#include <asm/cacheflush.h> #include <asm/proto.h> #define ISA_START_ADDRESS 0xa0000 #define ISA_END_ADDRESS 0x100000 -static inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, - unsigned long phys_addr, unsigned long flags) -{ - unsigned long end; - unsigned long pfn; - - address &= ~PMD_MASK; - end = address + size; - if (end > PMD_SIZE) - end = PMD_SIZE; - if (address >= end) - BUG(); - pfn = phys_addr >> PAGE_SHIFT; - do { - if (!pte_none(*pte)) { - printk("remap_area_pte: page already exists\n"); - BUG(); - } - set_pte(pte, pfn_pte(pfn, __pgprot(_PAGE_PRESENT | _PAGE_RW | - _PAGE_GLOBAL | _PAGE_DIRTY | _PAGE_ACCESSED | flags))); - address += PAGE_SIZE; - pfn++; - pte++; - } while (address && (address < end)); -} - -static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size, - unsigned long phys_addr, unsigned long flags) -{ - unsigned long end; - - address &= ~PUD_MASK; - end = address + size; - if (end > PUD_SIZE) - end = PUD_SIZE; - phys_addr -= address; - if (address >= end) - BUG(); - do { - pte_t * pte = pte_alloc_kernel(pmd, address); - if (!pte) - return -ENOMEM; - remap_area_pte(pte, address, end - address, address + phys_addr, flags); - address = (address + PMD_SIZE) & PMD_MASK; - pmd++; - } while (address && (address < end)); - return 0; -} - -static inline int remap_area_pud(pud_t * pud, unsigned long address, unsigned long size, - unsigned long phys_addr, unsigned long flags) -{ - unsigned long end; - - address &= ~PGDIR_MASK; - end = address + size; - if (end > PGDIR_SIZE) - end = PGDIR_SIZE; - phys_addr -= address; - if (address >= end) - BUG(); - do { - pmd_t * pmd = pmd_alloc(&init_mm, pud, address); - if (!pmd) - return -ENOMEM; - remap_area_pmd(pmd, address, end - address, address + phys_addr, flags); - address = (address + PUD_SIZE) & PUD_MASK; - pud++; - } while (address && (address < end)); - return 0; -} - -static int remap_area_pages(unsigned long address, unsigned long phys_addr, - unsigned long size, unsigned long flags) -{ - int error; - pgd_t *pgd; - unsigned long end = address + size; - - phys_addr -= address; - pgd = pgd_offset_k(address); - flush_cache_all(); - if (address >= end) - BUG(); - do { - pud_t *pud; - pud = pud_alloc(&init_mm, pgd, address); - error = -ENOMEM; - if (!pud) - break; - if (remap_area_pud(pud, address, end - address, - phys_addr + address, flags)) - break; - error = 0; - address = (address + PGDIR_SIZE) & PGDIR_MASK; - pgd++; - } while (address && (address < end)); - flush_tlb_all(); - return error; -} - /* * Fix up the linear direct mapping of the kernel to avoid cache attribute * conflicts. @@ -165,6 +64,7 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l void * addr; struct vm_struct * area; unsigned long offset, last_addr; + pgprot_t pgprot; /* Don't allow wraparound or zero size */ last_addr = phys_addr + size - 1; @@ -194,6 +94,8 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l } #endif + pgprot = __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_GLOBAL + | _PAGE_DIRTY | _PAGE_ACCESSED | flags); /* * Mappings have to be page-aligned */ @@ -209,7 +111,8 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l return NULL; area->phys_addr = phys_addr; addr = area->addr; - if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) { + if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size, + phys_addr, pgprot)) { remove_vm_area((void *)(PAGE_MASK & (unsigned long) addr)); return NULL; } diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c index f8c04d6935c9..3cc0544e25f5 100644 --- a/arch/x86_64/mm/srat.c +++ b/arch/x86_64/mm/srat.c @@ -23,22 +23,13 @@ int acpi_numa __initdata; -#if (defined(CONFIG_ACPI_HOTPLUG_MEMORY) || \ - defined(CONFIG_ACPI_HOTPLUG_MEMORY_MODULE)) \ - && !defined(CONFIG_MEMORY_HOTPLUG) -#define RESERVE_HOTADD 1 -#endif - static struct acpi_table_slit *acpi_slit; static nodemask_t nodes_parsed __initdata; static struct bootnode nodes[MAX_NUMNODES] __initdata; -static struct bootnode nodes_add[MAX_NUMNODES] __initdata; +static struct bootnode nodes_add[MAX_NUMNODES]; static int found_add_area __initdata; int hotadd_percent __initdata = 0; -#ifndef RESERVE_HOTADD -#define hotadd_percent 0 /* Ignore all settings */ -#endif /* Too small nodes confuse the VM badly. Usually they result from BIOS bugs. */ @@ -160,7 +151,7 @@ acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa) pxm, pa->apic_id, node); } -#ifdef RESERVE_HOTADD +#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE /* * Protect against too large hotadd areas that would fill up memory. */ @@ -203,15 +194,37 @@ static int hotadd_enough_memory(struct bootnode *nd) return 1; } +static int update_end_of_memory(unsigned long end) +{ + found_add_area = 1; + if ((end >> PAGE_SHIFT) > end_pfn) + end_pfn = end >> PAGE_SHIFT; + return 1; +} + +static inline int save_add_info(void) +{ + return hotadd_percent > 0; +} +#else +int update_end_of_memory(unsigned long end) {return 0;} +static int hotadd_enough_memory(struct bootnode *nd) {return 1;} +#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE +static inline int save_add_info(void) {return 1;} +#else +static inline int save_add_info(void) {return 0;} +#endif +#endif /* - * It is fine to add this area to the nodes data it will be used later + * Update nodes_add and decide if to include add are in the zone. + * Both SPARSE and RESERVE need nodes_add infomation. * This code supports one contigious hot add area per node. */ static int reserve_hotadd(int node, unsigned long start, unsigned long end) { unsigned long s_pfn = start >> PAGE_SHIFT; unsigned long e_pfn = end >> PAGE_SHIFT; - int changed = 0; + int ret = 0, changed = 0; struct bootnode *nd = &nodes_add[node]; /* I had some trouble with strange memory hotadd regions breaking @@ -240,7 +253,6 @@ static int reserve_hotadd(int node, unsigned long start, unsigned long end) /* Looks good */ - found_add_area = 1; if (nd->start == nd->end) { nd->start = start; nd->end = end; @@ -258,14 +270,12 @@ static int reserve_hotadd(int node, unsigned long start, unsigned long end) printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n"); } - if ((nd->end >> PAGE_SHIFT) > end_pfn) - end_pfn = nd->end >> PAGE_SHIFT; + ret = update_end_of_memory(nd->end); if (changed) printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n", nd->start, nd->end); - return 0; + return ret; } -#endif /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */ void __init @@ -284,7 +294,7 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) } if (ma->flags.enabled == 0) return; - if (ma->flags.hot_pluggable && hotadd_percent == 0) + if (ma->flags.hot_pluggable && !save_add_info()) return; start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32); end = start + (ma->length_lo | ((u64)ma->length_hi << 32)); @@ -327,15 +337,13 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) push_node_boundaries(node, nd->start >> PAGE_SHIFT, nd->end >> PAGE_SHIFT); -#ifdef RESERVE_HOTADD - if (ma->flags.hot_pluggable && reserve_hotadd(node, start, end) < 0) { + if (ma->flags.hot_pluggable && !reserve_hotadd(node, start, end) < 0) { /* Ignore hotadd region. Undo damage */ printk(KERN_NOTICE "SRAT: Hotplug region ignored\n"); *nd = oldnode; if ((nd->start | nd->end) == 0) node_clear(node, nodes_parsed); } -#endif } /* Sanity check to catch more bad SRATs (they are amazingly common). @@ -351,7 +359,6 @@ static int nodes_cover_memory(void) unsigned long e = nodes[i].end >> PAGE_SHIFT; pxmram += e - s; pxmram -= absent_pages_in_range(s, e); - pxmram -= nodes_add[i].end - nodes_add[i].start; if ((long)pxmram < 0) pxmram = 0; } @@ -459,3 +466,16 @@ int __node_distance(int a, int b) } EXPORT_SYMBOL(__node_distance); + +int memory_add_physaddr_to_nid(u64 start) +{ + int i, ret = 0; + + for_each_node(i) + if (nodes_add[i].start <= start && nodes_add[i].end > start) + ret = i; + + return ret; +} +EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); + diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index 412ab32de391..37347e369987 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -26,8 +26,6 @@ #include <asm/platform.h> -extern volatile unsigned long wall_jiffies; - DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); @@ -110,7 +108,6 @@ int do_settimeofday(struct timespec *tv) */ ccount = get_ccount(); nsec -= (ccount - last_ccount_stamp) * CCOUNT_NSEC; - nsec -= (jiffies - wall_jiffies) * CCOUNT_PER_JIFFY * CCOUNT_NSEC; wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); @@ -129,7 +126,7 @@ EXPORT_SYMBOL(do_settimeofday); void do_gettimeofday(struct timeval *tv) { unsigned long flags; - unsigned long sec, usec, delta, lost, seq; + unsigned long sec, usec, delta, seq; do { seq = read_seqbegin_irqsave(&xtime_lock, flags); @@ -137,12 +134,9 @@ void do_gettimeofday(struct timeval *tv) delta = get_ccount() - last_ccount_stamp; sec = xtime.tv_sec; usec = (xtime.tv_nsec / NSEC_PER_USEC); - - lost = jiffies - wall_jiffies; - } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - usec += lost * (1000000UL/HZ) + (delta * CCOUNT_NSEC) / NSEC_PER_USEC; + usec += (delta * CCOUNT_NSEC) / NSEC_PER_USEC; for (; usec >= 1000000; sec++, usec -= 1000000) ; @@ -175,12 +169,11 @@ again: last_ccount_stamp = next; next += CCOUNT_PER_JIFFY; - do_timer (regs); /* Linux handler in kernel/timer.c */ + do_timer (1); /* Linux handler in kernel/timer.c */ if (ntp_synced() && xtime.tv_sec - last_rtc_update >= 659 && - abs((xtime.tv_nsec/1000)-(1000000-1000000/HZ))<5000000/HZ && - jiffies - wall_jiffies == 1) { + abs((xtime.tv_nsec/1000)-(1000000-1000000/HZ))<5000000/HZ) { if (platform_set_rtc_time(xtime.tv_sec+1) == 0) last_rtc_update = xtime.tv_sec+1; diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c index a945a33e85a1..dd0dbec2e57e 100644 --- a/arch/xtensa/mm/fault.c +++ b/arch/xtensa/mm/fault.c @@ -144,7 +144,7 @@ bad_area: */ out_of_memory: up_read(&mm->mmap_sem); - if (current->pid == 1) { + if (is_init(current)) { yield(); down_read(&mm->mmap_sem); goto survive; diff --git a/arch/xtensa/platform-iss/network.c b/arch/xtensa/platform-iss/network.c index d96164e602fe..15d64414bd60 100644 --- a/arch/xtensa/platform-iss/network.c +++ b/arch/xtensa/platform-iss/network.c @@ -201,7 +201,7 @@ static void dev_ip_addr(void *d, char *buf, char *bin_buf) struct net_device *dev = d; struct in_device *ip = dev->ip_ptr; struct in_ifaddr *in; - u32 addr; + __be32 addr; if ((ip == NULL) || ((in = ip->ifa_list) == NULL)) { printk(KERN_WARNING "Device not assigned an IP address!\n"); |