Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A batch of fixes for -rc4, for various platforms.

  Nothing really substantial and worth pointing out in particular; small
  fixes for various bugs, see shortlog for details"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: sa1100: remove references to the defunct handhelds.org
  bus: uniphier-system-bus: fix condition of overlap check
  ARM: uniphier: drop weird sizeof()
  ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link type
  ARM: OMAP: Correct interrupt type for ARM TWD
  ARM: DRA722: Add ID detect for Silicon Rev 2.0
  ARM: dts: am43xx: fix edma memcpy channel allocation
  ARM: dts: AM43x-epos: Fix clk parent for synctimer
  ARM: OMAP2: Fix up interconnect barrier initialization for DRA7
  documentation: Fix pinctrl documentation for Meson8 / Meson8b
  ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b
  ARM: mvebu: Correct unit address for linksys
  bus: mvebu-mbus: use %pa to print phys_addr_t
  arm64: dts: vulcan: Update PCI ranges
  ARM: u8500_defconfig: turn on the Synaptics RMI4 driver
  ARM: pxa: fix the number of DMA requestor lines
  ARM: OMAP2+: hwmod: Fix updating of sysconfig register
  ARM: OMAP2+: Use srst_udelay for USB on dm814x

17 files changed, 80 insertions, 52 deletions

diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 6c667fb35449..4e28d87e9356 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -470,9 +470,12 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <1>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
 };
 
 &cpsw_emac1 {
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 6e4f5af3d8f8..344b861a55a5 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -207,7 +207,7 @@
 			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
 				   <&edma_tptc2 0>;
 
-			ti,edma-memcpy-channels = <32 33>;
+			ti,edma-memcpy-channels = <58 59>;
 		};
 
 		edma_tptc0: tptc@49800000 {
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 83dfafaaba1b..d5dd72047a7e 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -794,3 +794,8 @@
 	tx-num-evt = <32>;
 	rx-num-evt = <32>;
 };
+
+&synctimer_32kclk {
+	assigned-clocks = <&mux_synctimer32k_ck>;
+	assigned-clock-parents = <&clkdiv32k_ick>;
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index 3710755c6d76..85d2c377c332 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -117,7 +117,7 @@
 			};
 
 			/* USB part of the eSATA/USB 2.0 port */
-			usb@50000 {
+			usb@58000 {
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index a2ddcb8c545a..45619f6162c5 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -91,8 +91,8 @@
 		clock-frequency = <141666666>;
 	};
 
-	pinctrl: pinctrl@c1109880 {
-		compatible = "amlogic,meson8-pinctrl";
+	pinctrl_cbus: pinctrl@c1109880 {
+		compatible = "amlogic,meson8-cbus-pinctrl";
 		reg = <0xc1109880 0x10>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -108,29 +108,6 @@
 			#gpio-cells = <2>;
 		};
 
-		gpio_ao: ao-bank@c1108030 {
-			reg = <0xc8100014 0x4>,
-			      <0xc810002c 0x4>,
-			      <0xc8100024 0x8>;
-			reg-names = "mux", "pull", "gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		uart_ao_a_pins: uart_ao_a {
-			mux {
-				groups = "uart_tx_ao_a", "uart_rx_ao_a";
-				function = "uart_ao";
-			};
-		};
-
-		i2c_ao_pins: i2c_mst_ao {
-			mux {
-				groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
-				function = "i2c_mst_ao";
-			};
-		};
-
 		spi_nor_pins: nor {
 			mux {
 				groups = "nor_d", "nor_q", "nor_c", "nor_cs";
@@ -157,4 +134,34 @@
 		};
 	};
 
+	pinctrl_aobus: pinctrl@c8100084 {
+		compatible = "amlogic,meson8-aobus-pinctrl";
+		reg = <0xc8100084 0xc>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio_ao: ao-bank@c1108030 {
+			reg = <0xc8100014 0x4>,
+			      <0xc810002c 0x4>,
+			      <0xc8100024 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+			};
+		};
+
+		i2c_ao_pins: i2c_mst_ao {
+			mux {
+				groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
+				function = "i2c_mst_ao";
+			};
+		};
+	};
 }; /* end of / */
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 8bad5571af46..2bfe401a4da9 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -155,8 +155,8 @@
 			reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
 		};
 
-		pinctrl: pinctrl@c1109880 {
-			compatible = "amlogic,meson8b-pinctrl";
+		pinctrl_cbus: pinctrl@c1109880 {
+			compatible = "amlogic,meson8b-cbus-pinctrl";
 			reg = <0xc1109880 0x10>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -171,6 +171,14 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 			};
+		};
+
+		pinctrl_aobus: pinctrl@c8100084 {
+			compatible = "amlogic,meson8b-aobus-pinctrl";
+			reg = <0xc8100084 0xc>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 
 			gpio_ao: ao-bank@c1108030 {
 				reg = <0xc8100014 0x4>,
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 2bd9c83300b2..421fe9f8a9eb 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -70,7 +70,7 @@
 		compatible = "arm,cortex-a9-twd-timer";
 		clocks = <&mpu_periphclk>;
 		reg = <0x48240600 0x20>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>;
 		interrupt-parent = <&gic>;
 	};
 
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 07055eacbb0f..a691d590fbd1 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -63,6 +63,9 @@ CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_BU21013=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_AB8500_PONKEY=y
+CONFIG_RMI4_CORE=y
+CONFIG_RMI4_I2C=y
+CONFIG_RMI4_F11=y
 # CONFIG_SERIO is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index d85c24918c17..2abd53ae3e7a 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -669,9 +669,9 @@ void __init dra7xxx_check_revision(void)
 		case 0:
 			omap_revision = DRA722_REV_ES1_0;
 			break;
+		case 1:
 		default:
-			/* If we have no new revisions */
-			omap_revision = DRA722_REV_ES1_0;
+			omap_revision = DRA722_REV_ES2_0;
 			break;
 		}
 		break;
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3c87e40650cf..9821be6dfd5e 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -368,6 +368,7 @@ void __init omap5_map_io(void)
 void __init dra7xx_map_io(void)
 {
 	iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc));
+	omap_barriers_init();
 }
 #endif
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index b6d62e4cdfdd..2af6ff63e3b4 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1416,9 +1416,7 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	    (sf & SYSC_HAS_CLOCKACTIVITY))
 		_set_clockactivity(oh, oh->class->sysc->clockact, &v);
 
-	/* If the cached value is the same as the new value, skip the write */
-	if (oh->_sysc_cache != v)
-		_write_sysconfig(v, oh);
+	_write_sysconfig(v, oh);
 
 	/*
 	 * Set the autoidle bit only after setting the smartidle bit
@@ -1481,7 +1479,9 @@ static void _idle_sysc(struct omap_hwmod *oh)
 		_set_master_standbymode(oh, idlemode, &v);
 	}
 
-	_write_sysconfig(v, oh);
+	/* If the cached value is the same as the new value, skip the write */
+	if (oh->_sysc_cache != v)
+		_write_sysconfig(v, oh);
 }
 
 /**
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index 39736ad2a754..df8327713d06 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -582,9 +582,11 @@ static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__gpmc = {
 	.user		= OCP_USER_MPU,
 };
 
+/* USB needs udelay 1 after reset at least on hp t410, use 2 for margin */
 static struct omap_hwmod_class_sysconfig dm81xx_usbhsotg_sysc = {
 	.rev_offs	= 0x0,
 	.sysc_offs	= 0x10,
+	.srst_udelay	= 2,
 	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
 				SYSC_HAS_SOFTRESET,
 	.idlemodes	= SIDLE_SMART | MSTANDBY_FORCE | MSTANDBY_SMART,
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index 70df8f6cddcc..364418c78bf3 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -489,6 +489,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define DRA752_REV_ES2_0	(DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8))
 #define DRA722_REV_ES1_0	(DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
 #define DRA722_REV_ES1_0	(DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
+#define DRA722_REV_ES2_0	(DRA7XX_CLASS | (0x22 << 16) | (0x20 << 8))
 
 void omap2xxx_check_revision(void);
 void omap3xxx_check_revision(void);
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 913a319c7b00..fffb697bbf0e 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -1235,5 +1235,6 @@ static struct platform_device pxa2xx_pxa_dma = {
 void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors)
 {
 	pxa_dma_pdata.dma_channels = nb_channels;
+	pxa_dma_pdata.nb_requestors = nb_requestors;
 	pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata);
 }
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index c6f6ed1cbed0..36e3c79f4973 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -61,10 +61,7 @@ config SA1100_H3100
 	select MFD_IPAQ_MICRO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
-	  H3100 handheld computer.  Information about this machine and the
-	  Linux port to this machine can be found at:
-
-	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
+	  H3100 handheld computer.
 
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
@@ -73,10 +70,7 @@ config SA1100_H3600
 	select MFD_IPAQ_MICRO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
-	  H3600 handheld computer.  Information about this machine and the
-	  Linux port to this machine can be found at:
-
-	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
+	  H3600 and H3700 handheld computers.
 
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c
index 69141357afe8..db04142f88bc 100644
--- a/arch/arm/mach-uniphier/platsmp.c
+++ b/arch/arm/mach-uniphier/platsmp.c
@@ -120,7 +120,7 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
 	if (ret)
 		return ret;
 
-	uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, sizeof(SZ_4));
+	uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, SZ_4);
 	if (!uniphier_smp_rom_boot_rsv2) {
 		pr_err("failed to map ROM_BOOT_RSV2 register\n");
 		return -ENOMEM;
diff --git a/arch/arm64/boot/dts/broadcom/vulcan.dtsi b/arch/arm64/boot/dts/broadcom/vulcan.dtsi
index c49b5a85809c..85820e2bca9d 100644
--- a/arch/arm64/boot/dts/broadcom/vulcan.dtsi
+++ b/arch/arm64/boot/dts/broadcom/vulcan.dtsi
@@ -108,12 +108,15 @@
 		reg = <0x0 0x30000000  0x0 0x10000000>;
 		reg-names = "PCI ECAM";
 
-			  /* IO 0x4000_0000 - 0x4001_0000 */
-		ranges = <0x01000000 0 0x40000000 0 0x40000000 0 0x00010000
-			  /* MEM 0x4800_0000 - 0x5000_0000 */
-			  0x02000000 0 0x48000000 0 0x48000000 0 0x08000000
-			  /* MEM64 pref 0x6_0000_0000 - 0x7_0000_0000 */
-			  0x43000000 6 0x00000000 6 0x00000000 1 0x00000000>;
+		/*
+		 * PCI ranges:
+		 *   IO		no supported
+		 *   MEM        0x4000_0000 - 0x6000_0000
+		 *   MEM64 pref 0x40_0000_0000 - 0x60_0000_0000
+		 */
+		ranges =
+		  <0x02000000    0 0x40000000    0 0x40000000    0 0x20000000
+		   0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
 		interrupt-map-mask = <0 0 0 7>;
 		interrupt-map =
 		      /* addr  pin  ic   icaddr  icintr */