summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorPaul Bolle <pebolle@tiscali.nl>2011-10-18 10:10:07 +0200
committerGreg Ungerer <gerg@uclinux.org>2011-10-21 14:56:43 +1000
commit95e82747d6e2abc513bfae416e6009968985d05b (patch)
tree12791f13a15d89f7ea8e22a8e0243edb498cb95d /arch
parent7a79a80f50a9c7f76b257a3a55dd6a055e6893cf (diff)
downloadlinux-95e82747d6e2abc513bfae416e6009968985d05b.tar.bz2
m68k: drop unused Kconfig symbols
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Diffstat (limited to 'arch')
-rw-r--r--arch/m68k/Kconfig.devices28
-rw-r--r--arch/m68k/Kconfig.machine43
2 files changed, 1 insertions, 70 deletions
diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices
index d964dc4c2ce8..dbff9413646f 100644
--- a/arch/m68k/Kconfig.devices
+++ b/arch/m68k/Kconfig.devices
@@ -77,32 +77,6 @@ config MULTIFACE_III_TTY
To compile this driver as a module, choose M here.
-config GVPIOEXT
- tristate "GVP IO-Extender support"
- depends on PARPORT=n && ZORRO
- help
- If you want to use a GVP IO-Extender serial card in Linux, say Y.
- Otherwise, say N.
-
-config GVPIOEXT_LP
- tristate "GVP IO-Extender parallel printer support"
- depends on GVPIOEXT
- help
- Say Y to enable driving a printer from the parallel port on your
- GVP IO-Extender card, N otherwise.
-
-config GVPIOEXT_PLIP
- tristate "GVP IO-Extender PLIP support"
- depends on GVPIOEXT
- help
- Say Y to enable doing IP over the parallel port on your GVP
- IO-Extender card, N otherwise.
-
-config MAC_HID
- bool
- depends on INPUT_ADBHID
- default y
-
config HPDCA
tristate "HP DCA serial support"
depends on DIO && SERIAL_8250
@@ -145,7 +119,7 @@ config DN_SERIAL
config SERIAL_CONSOLE
bool "Support for serial port console"
- depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
+ depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
---help---
If you say Y here, it will be possible to use a serial port as the
system console (the system console is the device which receives all
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index 7d5c20b896c7..ef4a26aff780 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -303,9 +303,6 @@ config COBRA5282
help
Support for the senTec COBRA5282 board.
-config EMAC_INC
- bool
-
config SOM5282EM
bool "EMAC.Inc SOM5282EM board support"
depends on M528x
@@ -371,27 +368,21 @@ config FIREBEE
help
Support for the FireBee ColdFire 5475 based board.
-config HW_FEITH
- bool
-
config CLEOPATRA
bool "Feith CLEOPATRA board support"
depends on (M5307 || M5407)
- select HW_FEITH
help
Support for the Feith Cleopatra boards.
config CANCam
bool "Feith CANCam board support"
depends on M5272
- select HW_FEITH
help
Support for the Feith CANCam board.
config SCALES
bool "Feith SCALES board support"
depends on M5272
- select HW_FEITH
help
Support for the Feith SCALES board.
@@ -438,13 +429,6 @@ if !MMU || COLDFIRE
comment "Machine Options"
-config ROMFS_FROM_ROM
- bool "ROMFS image not RAM resident"
- depends on (NETtel || SNAPGEAR)
- help
- The ROMfs filesystem will stay resident in the FLASH/ROM, not be
- moved into RAM.
-
config UBOOT
bool "Support for U-Boot command line parameters"
help
@@ -524,33 +508,6 @@ config KERNELBASE
a system with the RAM based at address 0, and leaving enough room
for the theoretical maximum number of 256 vectors.
-choice
- prompt "RAM bus width"
- default RAMAUTOBIT
-
-config RAMAUTOBIT
- bool "AUTO"
- help
- Select the physical RAM data bus size. Not needed on most platforms,
- so you can generally choose AUTO.
-
-config RAM8BIT
- bool "8bit"
- help
- Configure RAM bus to be 8 bits wide.
-
-config RAM16BIT
- bool "16bit"
- help
- Configure RAM bus to be 16 bits wide.
-
-config RAM32BIT
- bool "32bit"
- help
- Configure RAM bus to be 32 bits wide.
-
-endchoice
-
comment "ROM configuration"
config ROM