Merge tag 'armsoc-drivers' into test-merge

ARM: SoC: driver updates for v4.2

Some of these are for drivers/soc, where we're now putting
SoC-specific drivers these days. Some are for other driver subsystems
where we have received acks from the appropriate maintainers.

Some highlights:

- simple-mfd: document DT bindings and misc updates
- migrate mach-berlin to simple-mfd for clock, pinctrl and reset
- memory: support for Tegra132 SoC
- memory: introduce tegra EMC driver for scaling memory frequency
- misc. updates for ARM CCI and CCN busses

 Conflicts:
	arch/arm64/boot/dts/arm/juno-motherboard.dtsi

 Trivial add/add conflict with our dt branch.
 Resolution: take both sides.

# gpg: Signature made Wed Jun 24 21:32:17 2015 PDT using RSA key ID D3FBC665
# gpg: Good signature from "Kevin Hilman <khilman@deeprootsystems.com>"
# gpg:                 aka "Kevin Hilman <khilman@linaro.org>"
# gpg:                 aka "Kevin Hilman <khilman@kernel.org>"

# Conflicts:
#	arch/arm64/boot/dts/arm/juno-motherboard.dtsi

8 files changed, 242 insertions, 115 deletions

diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index ff26c7ed8c41..1bc64cda819e 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -114,7 +114,7 @@
 		ranges;
 
 		syscon: syscon@10000000 {
-			compatible = "arm,realview-pb1176-syscon", "syscon";
+			compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
 
 			led@08.0 {
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index da9adf8f69da..ef811de09908 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -84,7 +84,7 @@
 		sdhci0: sdhci@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
-			clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+			clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
 			clock-names = "io", "core";
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -93,7 +93,7 @@
 		sdhci1: sdhci@ab0800 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0800 0x200>;
-			clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO1>;
 			clock-names = "io", "core";
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -103,7 +103,7 @@
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab1000 0x200>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+			clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
 			clock-names = "io", "core";
 			pinctrl-0 = <&emmc_pmux>;
 			pinctrl-names = "default";
@@ -133,13 +133,13 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&chip CLKID_TWD>;
+			clocks = <&chip_clk CLKID_TWD>;
 		};
 
 		eth1: ethernet@b90000 {
 			compatible = "marvell,pxa168-eth";
 			reg = <0xb90000 0x10000>;
-			clocks = <&chip CLKID_GETH1>;
+			clocks = <&chip_clk CLKID_GETH1>;
 			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 			/* set by bootloader */
 			local-mac-address = [00 00 00 00 00 00];
@@ -162,7 +162,7 @@
 		eth0: ethernet@e50000 {
 			compatible = "marvell,pxa168-eth";
 			reg = <0xe50000 0x10000>;
-			clocks = <&chip CLKID_GETH0>;
+			clocks = <&chip_clk CLKID_GETH0>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			/* set by bootloader */
 			local-mac-address = [00 00 00 00 00 00];
@@ -261,7 +261,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c00 0x14>;
 				interrupts = <8>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -270,7 +270,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c14 0x14>;
 				interrupts = <9>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -279,7 +279,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c28 0x14>;
 				interrupts = <10>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -288,7 +288,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c3c 0x14>;
 				interrupts = <11>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -297,7 +297,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c50 0x14>;
 				interrupts = <12>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -306,7 +306,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c64 0x14>;
 				interrupts = <13>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -315,7 +315,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c78 0x14>;
 				interrupts = <14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -324,7 +324,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c8c 0x14>;
 				interrupts = <15>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -343,7 +343,7 @@
 			compatible = "marvell,berlin2-ahci", "generic-ahci";
 			reg = <0xe90000 0x1000>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_SATA>;
+			clocks = <&chip_clk CLKID_SATA>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -363,7 +363,7 @@
 		sata_phy: phy@e900a0 {
 			compatible = "marvell,berlin2-sata-phy";
 			reg = <0xe900a0 0x200>;
-			clocks = <&chip CLKID_SATA>;
+			clocks = <&chip_clk CLKID_SATA>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#phy-cells = <1>;
@@ -379,16 +379,28 @@
 		};
 
 		chip: chip-control@ea0000 {
-			compatible = "marvell,berlin2-chip-ctrl";
-			#clock-cells = <1>;
-			#reset-cells = <2>;
+			compatible = "simple-mfd", "syscon";
 			reg = <0xea0000 0x400>;
-			clocks = <&refclk>;
-			clock-names = "refclk";
 
-			emmc_pmux: emmc-pmux {
-				groups = "G26";
-				function = "emmc";
+			chip_clk: clock {
+				compatible = "marvell,berlin2-clk";
+				#clock-cells = <1>;
+				clocks = <&refclk>;
+				clock-names = "refclk";
+			};
+
+			soc_pinctrl: pin-controller {
+				compatible = "marvell,berlin2-soc-pinctrl";
+
+				emmc_pmux: emmc-pmux {
+					groups = "G26";
+					function = "emmc";
+				};
+			};
+
+			chip_rst: reset {
+				compatible = "marvell,berlin2-reset";
+				#reset-cells = <2>;
 			};
 		};
 
@@ -470,22 +482,24 @@
 			};
 
 			sysctrl: system-controller@d000 {
-				compatible = "marvell,berlin2-system-ctrl";
+				compatible = "simple-mfd", "syscon";
 				reg = <0xd000 0x100>;
 
-				uart0_pmux: uart0-pmux {
-					groups = "GSM4";
-					function = "uart0";
-				};
-
-				uart1_pmux: uart1-pmux {
-					groups = "GSM5";
-					function = "uart1";
-				};
-
-				uart2_pmux: uart2-pmux {
-					groups = "GSM3";
-					function = "uart2";
+				sys_pinctrl: pin-controller {
+					compatible = "marvell,berlin2-system-pinctrl";
+					uart0_pmux: uart0-pmux {
+						groups = "GSM4";
+						function = "uart0";
+					};
+
+					uart1_pmux: uart1-pmux {
+						groups = "GSM5";
+						function = "uart1";
+					};
+					uart2_pmux: uart2-pmux {
+						groups = "GSM3";
+						function = "uart2";
+					};
 				};
 			};
 
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index cb2a97cb9579..900213d78a32 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -81,7 +81,7 @@
 		sdhci0: sdhci@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
-			clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+			clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
 			clock-names = "io", "core";
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -105,14 +105,14 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&chip CLKID_TWD>;
+			clocks = <&chip_clk CLKID_TWD>;
 		};
 
 		usb_phy0: usb-phy@b74000 {
 			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xb74000 0x128>;
 			#phy-cells = <0>;
-			resets = <&chip 0x178 23>;
+			resets = <&chip_rst 0x178 23>;
 			status = "disabled";
 		};
 
@@ -120,14 +120,14 @@
 			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xb78000 0x128>;
 			#phy-cells = <0>;
-			resets = <&chip 0x178 24>;
+			resets = <&chip_rst 0x178 24>;
 			status = "disabled";
 		};
 
 		eth1: ethernet@b90000 {
 			compatible = "marvell,pxa168-eth";
 			reg = <0xb90000 0x10000>;
-			clocks = <&chip CLKID_GETH1>;
+			clocks = <&chip_clk CLKID_GETH1>;
 			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 			/* set by bootloader */
 			local-mac-address = [00 00 00 00 00 00];
@@ -145,7 +145,7 @@
 		eth0: ethernet@e50000 {
 			compatible = "marvell,pxa168-eth";
 			reg = <0xe50000 0x10000>;
-			clocks = <&chip CLKID_GETH0>;
+			clocks = <&chip_clk CLKID_GETH0>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			/* set by bootloader */
 			local-mac-address = [00 00 00 00 00 00];
@@ -244,7 +244,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c00 0x14>;
 				interrupts = <8>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -253,7 +253,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c14 0x14>;
 				interrupts = <9>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -262,7 +262,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c28 0x14>;
 				interrupts = <10>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -271,7 +271,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c3c 0x14>;
 				interrupts = <11>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -280,7 +280,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c50 0x14>;
 				interrupts = <12>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -289,7 +289,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c64 0x14>;
 				interrupts = <13>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -298,7 +298,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c78 0x14>;
 				interrupts = <14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -307,7 +307,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c8c 0x14>;
 				interrupts = <15>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -323,16 +323,28 @@
 		};
 
 		chip: chip-control@ea0000 {
-			compatible = "marvell,berlin2cd-chip-ctrl";
-			#clock-cells = <1>;
-			#reset-cells = <2>;
+			compatible = "simple-mfd", "syscon";
 			reg = <0xea0000 0x400>;
-			clocks = <&refclk>;
-			clock-names = "refclk";
 
-			uart0_pmux: uart0-pmux {
-				groups = "G6";
-				function = "uart0";
+			chip_clk: clock {
+				compatible = "marvell,berlin2-clk";
+				#clock-cells = <1>;
+				clocks = <&refclk>;
+				clock-names = "refclk";
+			};
+
+			soc_pinctrl: pin-controller {
+				compatible = "marvell,berlin2cd-soc-pinctrl";
+
+				uart0_pmux: uart0-pmux {
+					groups = "G6";
+					function = "uart0";
+				};
+			};
+
+			chip_rst: reset {
+				compatible = "marvell,berlin2-reset";
+				#reset-cells = <2>;
 			};
 		};
 
@@ -340,7 +352,7 @@
 			compatible = "chipidea,usb2";
 			reg = <0xed0000 0x200>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_USB0>;
+			clocks = <&chip_clk CLKID_USB0>;
 			phys = <&usb_phy0>;
 			phy-names = "usb-phy";
 			status = "disabled";
@@ -350,7 +362,7 @@
 			compatible = "chipidea,usb2";
 			reg = <0xee0000 0x200>;
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_USB1>;
+			clocks = <&chip_clk CLKID_USB1>;
 			phys = <&usb_phy1>;
 			phy-names = "usb-phy";
 			status = "disabled";
@@ -417,8 +429,12 @@
 			};
 
 			sysctrl: system-controller@d000 {
-				compatible = "marvell,berlin2cd-system-ctrl";
+				compatible = "simple-mfd", "syscon";
 				reg = <0xd000 0x100>;
+
+				sys_pinctrl: pin-controller {
+					compatible = "marvell,berlin2cd-system-pinctrl";
+				};
 			};
 
 			sic: interrupt-controller@e000 {
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 703ce384e0d7..63a48490e2f9 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -102,7 +102,7 @@
 		sdhci0: sdhci@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
-			clocks = <&chip CLKID_SDIO1XIN>;
+			clocks = <&chip_clk CLKID_SDIO1XIN>;
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -110,7 +110,7 @@
 		sdhci1: sdhci@ab0800 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0800 0x200>;
-			clocks = <&chip CLKID_SDIO1XIN>;
+			clocks = <&chip_clk CLKID_SDIO1XIN>;
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -119,7 +119,7 @@
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab1000 0x200>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+			clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
 			clock-names = "io", "core";
 			status = "disabled";
 		};
@@ -140,7 +140,7 @@
 		local-timer@ad0600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
-			clocks = <&chip CLKID_TWD>;
+			clocks = <&chip_clk CLKID_TWD>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
@@ -155,7 +155,7 @@
 			compatible = "marvell,berlin2-usb-phy";
 			reg = <0xa2f400 0x128>;
 			#phy-cells = <0>;
-			resets = <&chip 0x104 14>;
+			resets = <&chip_rst 0x104 14>;
 			status = "disabled";
 		};
 
@@ -163,7 +163,7 @@
 			compatible = "chipidea,usb2";
 			reg = <0xa30000 0x10000>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_USB2>;
+			clocks = <&chip_clk CLKID_USB2>;
 			phys = <&usb_phy2>;
 			phy-names = "usb-phy";
 			status = "disabled";
@@ -173,7 +173,7 @@
 			compatible = "marvell,berlin2-usb-phy";
 			reg = <0xb74000 0x128>;
 			#phy-cells = <0>;
-			resets = <&chip 0x104 12>;
+			resets = <&chip_rst 0x104 12>;
 			status = "disabled";
 		};
 
@@ -181,14 +181,14 @@
 			compatible = "marvell,berlin2-usb-phy";
 			reg = <0xb78000 0x128>;
 			#phy-cells = <0>;
-			resets = <&chip 0x104 13>;
+			resets = <&chip_rst 0x104 13>;
 			status = "disabled";
 		};
 
 		eth0: ethernet@b90000 {
 			compatible = "marvell,pxa168-eth";
 			reg = <0xb90000 0x10000>;
-			clocks = <&chip CLKID_GETH0>;
+			clocks = <&chip_clk CLKID_GETH0>;
 			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 			/* set by bootloader */
 			local-mac-address = [00 00 00 00 00 00];
@@ -295,7 +295,7 @@
 				reg = <0x1400 0x100>;
 				interrupt-parent = <&aic>;
 				interrupts = <4>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				pinctrl-0 = <&twsi0_pmux>;
 				pinctrl-names = "default";
 				status = "disabled";
@@ -308,7 +308,7 @@
 				reg = <0x1800 0x100>;
 				interrupt-parent = <&aic>;
 				interrupts = <5>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				pinctrl-0 = <&twsi1_pmux>;
 				pinctrl-names = "default";
 				status = "disabled";
@@ -317,7 +317,7 @@
 			timer0: timer@2c00 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c00 0x14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				interrupts = <8>;
 			};
@@ -325,14 +325,14 @@
 			timer1: timer@2c14 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c14 0x14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 			};
 
 			timer2: timer@2c28 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c28 0x14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -340,7 +340,7 @@
 			timer3: timer@2c3c {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c3c 0x14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -348,7 +348,7 @@
 			timer4: timer@2c50 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c50 0x14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -356,7 +356,7 @@
 			timer5: timer@2c64 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c64 0x14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -364,7 +364,7 @@
 			timer6: timer@2c78 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c78 0x14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -372,7 +372,7 @@
 			timer7: timer@2c8c {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c8c 0x14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -388,21 +388,33 @@
 		};
 
 		chip: chip-control@ea0000 {
-			compatible = "marvell,berlin2q-chip-ctrl";
-			#clock-cells = <1>;
-			#reset-cells = <2>;
+			compatible = "simple-mfd", "syscon";
 			reg = <0xea0000 0x400>, <0xdd0170 0x10>;
-			clocks = <&refclk>;
-			clock-names = "refclk";
 
-			twsi0_pmux: twsi0-pmux {
-				groups = "G6";
-				function = "twsi0";
+			chip_clk: clock {
+				compatible = "marvell,berlin2q-clk";
+				#clock-cells = <1>;
+				clocks = <&refclk>;
+				clock-names = "refclk";
 			};
 
-			twsi1_pmux: twsi1-pmux {
-				groups = "G7";
-				function = "twsi1";
+			soc_pinctrl: pin-controller {
+				compatible = "marvell,berlin2q-soc-pinctrl";
+
+				twsi0_pmux: twsi0-pmux {
+					groups = "G6";
+					function = "twsi0";
+				};
+
+				twsi1_pmux: twsi1-pmux {
+					groups = "G7";
+					function = "twsi1";
+				};
+			};
+
+			chip_rst: reset {
+				compatible = "marvell,berlin2-reset";
+				#reset-cells = <2>;
 			};
 		};
 
@@ -410,7 +422,7 @@
 			compatible = "marvell,berlin2q-ahci", "generic-ahci";
 			reg = <0xe90000 0x1000>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_SATA>;
+			clocks = <&chip_clk CLKID_SATA>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -430,7 +442,7 @@
 		sata_phy: phy@e900a0 {
 			compatible = "marvell,berlin2q-sata-phy";
 			reg = <0xe900a0 0x200>;
-			clocks = <&chip CLKID_SATA>;
+			clocks = <&chip_clk CLKID_SATA>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#phy-cells = <1>;
@@ -449,7 +461,7 @@
 			compatible = "chipidea,usb2";
 			reg = <0xed0000 0x10000>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_USB0>;
+			clocks = <&chip_clk CLKID_USB0>;
 			phys = <&usb_phy0>;
 			phy-names = "usb-phy";
 			status = "disabled";
@@ -459,7 +471,7 @@
 			compatible = "chipidea,usb2";
 			reg = <0xee0000 0x10000>;
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_USB1>;
+			clocks = <&chip_clk CLKID_USB1>;
 			phys = <&usb_phy1>;
 			phy-names = "usb-phy";
 			status = "disabled";
@@ -554,27 +566,37 @@
 			};
 
 			sysctrl: pin-controller@d000 {
-				compatible = "marvell,berlin2q-system-ctrl";
+				compatible = "simple-mfd", "syscon";
 				reg = <0xd000 0x100>;
 
-				uart0_pmux: uart0-pmux {
-					groups = "GSM12";
-					function = "uart0";
-				};
+				sys_pinctrl: pin-controller {
+					compatible = "marvell,berlin2q-system-pinctrl";
 
-				uart1_pmux: uart1-pmux {
-					groups = "GSM14";
-					function = "uart1";
-				};
+					uart0_pmux: uart0-pmux {
+						groups = "GSM12";
+						function = "uart0";
+					};
+
+					uart1_pmux: uart1-pmux {
+						groups = "GSM14";
+						function = "uart1";
+					};
+
+					twsi2_pmux: twsi2-pmux {
+						groups = "GSM13";
+						function = "twsi2";
+					};
 
-				twsi2_pmux: twsi2-pmux {
-					groups = "GSM13";
-					function = "twsi2";
+					twsi3_pmux: twsi3-pmux {
+						groups = "GSM14";
+						function = "twsi3";
+					};
 				};
 
-				twsi3_pmux: twsi3-pmux {
-					groups = "GSM14";
-					function = "twsi3";
+				adc: adc {
+					compatible = "marvell,berlin2-adc";
+					interrupts = <12>, <14>;
+					interrupt-names = "adc", "tsen";
 				};
 			};
 
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
index 28e38f8c6b0f..3807d4f46ef7 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -6,7 +6,7 @@
 
 / {
 	core-module@10000000 {
-		compatible = "arm,core-module-integrator", "syscon";
+		compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
 		reg = <0x10000000 0x200>;
 
 		/* Use core module LED to indicate CPU load */
@@ -95,7 +95,7 @@
 
 		syscon {
 			/* Debug registers mapped as syscon */
-			compatible = "syscon";
+			compatible = "syscon", "simple-mfd";
 			reg = <0x1a000000 0x10>;
 
 			led@04.0 {
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index 3e40a947f3ea..742d53a5f7f9 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -6,6 +6,7 @@ menuconfig ARCH_BERLIN
 	select DW_APB_ICTL
 	select DW_APB_TIMER_OF
 	select GENERIC_IRQ_CHIP
+	select MFD_SYSCON
 	select PINCTRL
 
 if ARCH_BERLIN
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index fde0cfad09de..021e0f40f419 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -138,6 +138,74 @@
 					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
 				};
 
+				apbregs@010000 {
+					compatible = "syscon", "simple-mfd";
+					reg = <0x010000 0x1000>;
+
+					led@08.0 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x01>;
+						label = "vexpress:0";
+						linux,default-trigger = "heartbeat";
+						default-state = "on";
+					};
+					led@08.1 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x02>;
+						label = "vexpress:1";
+						linux,default-trigger = "mmc0";
+						default-state = "off";
+					};
+					led@08.2 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x04>;
+						label = "vexpress:2";
+						linux,default-trigger = "cpu0";
+						default-state = "off";
+					};
+					led@08.3 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x08>;
+						label = "vexpress:3";
+						linux,default-trigger = "cpu1";
+						default-state = "off";
+					};
+					led@08.4 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x10>;
+						label = "vexpress:4";
+						linux,default-trigger = "cpu2";
+						default-state = "off";
+					};
+					led@08.5 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x20>;
+						label = "vexpress:5";
+						linux,default-trigger = "cpu3";
+						default-state = "off";
+					};
+					led@08.6 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x40>;
+						label = "vexpress:6";
+						default-state = "off";
+					};
+					led@08.7 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x80>;
+						label = "vexpress:7";
+						default-state = "off";
+					};
+				};
+
 				mmci@050000 {
 					compatible = "arm,pl180", "arm,primecell";
 					reg = <0x050000 0x1000>;
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 1d293ea16f46..ab66f1600cec 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -139,6 +139,12 @@ CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SPI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_EFI=y
 CONFIG_RTC_DRV_XGENE=y