Merge tag 'omap-for-v4.2/wakeirq-drivers-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/late

Merge "omap generic wakeirq for v4.2 merge window" from Tony Lindgren:

Omap driver changes for v4.2 to switch drivers over to Linux generic
wake IRQ events for omap_hsmmc, 8250_omap and omap-serial
drivers.

The generic wake IRQs also fix issues that these drivers potentially
have with IRQ re-entrancy at least for serial-omap.

Note that because of dependencies and merge conflicts these are
based on Rafael's pm-wakeirq and Greg's tty-next branches.

* tag 'omap-for-v4.2/wakeirq-drivers-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (148 commits)
  serial: 8250_omap: Move wake-up interrupt to generic wakeirq
  serial: omap: Switch wake-up interrupt to generic wakeirq
  tty: move linux/gsmmux.h to uapi
  doc: dt: add documentation for nxp,lpc1850-uart
  serial: 8250: add LPC18xx/43xx UART driver
  serial: 8250_uniphier: add UniPhier serial driver
  serial: 8250_dw: support ACPI platforms with integrated DMA engine
  serial: of_serial: check the return value of clk_prepare_enable()
  serial: of_serial: use devm_clk_get() instead of clk_get()
  serial: earlycon: Add support for big-endian MMIO accesses
  serial: sirf: use hrtimer for data rx
  serial: sirf: correct the fifo empty_bit
  serial: sirf: fix system hung on console log output
  serial: 8250: remove return statements from void function
  sc16is7xx: use kworker for RS-485 configuration
  sc16is7xx: use kworker to update ier bits
  sc16is7xx: use kworker for md_proc
  sc16is7xx: move RTS delay to workqueue
  sc16is7xx: use kthread_worker for tx_work and irq
  sc16is7xx: use LSR_TEMT_BIT in .tx_empty()
  ...

6 files changed, 12 insertions, 9 deletions

diff --git a/arch/alpha/include/asm/serial.h b/arch/alpha/include/asm/serial.h
index 9d263e8d8ccc..22909b83f473 100644
--- a/arch/alpha/include/asm/serial.h
+++ b/arch/alpha/include/asm/serial.h
@@ -13,7 +13,7 @@
 #define BASE_BAUD ( 1843200 / 16 )
 
 /* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
+#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
 #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
 #define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
 #else
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index 5662a872689b..873dbfcc7dc9 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -1350,6 +1350,9 @@ void edma_stop(unsigned channel)
 		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
 		edma_write_array(ctlr, EDMA_EMCR, j, mask);
 
+		/* clear possibly pending completion interrupt */
+		edma_shadow0_write_array(ctlr, SH_ICR, j, mask);
+
 		pr_debug("EDMA: EER%d %08x\n", j,
 				edma_shadow0_read_array(ctlr, SH_EER, j));
 
diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h
index d00d732784b1..b550ada7321b 100644
--- a/arch/blackfin/include/asm/bfin_serial.h
+++ b/arch/blackfin/include/asm/bfin_serial.h
@@ -22,9 +22,9 @@
     defined(CONFIG_BFIN_UART2_CTSRTS) || \
     defined(CONFIG_BFIN_UART3_CTSRTS)
 # if defined(BFIN_UART_BF54X_STYLE) || defined(BFIN_UART_BF60X_STYLE)
-#  define CONFIG_SERIAL_BFIN_HARD_CTSRTS
+#  define SERIAL_BFIN_HARD_CTSRTS
 # else
-#  define CONFIG_SERIAL_BFIN_CTSRTS
+#  define SERIAL_BFIN_CTSRTS
 # endif
 #endif
 
@@ -50,8 +50,8 @@ struct bfin_serial_port {
 #elif ANOMALY_05000363
 	unsigned int anomaly_threshold;
 #endif
-#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
-	defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+#if defined(SERIAL_BFIN_CTSRTS) || \
+	defined(SERIAL_BFIN_HARD_CTSRTS)
 	int cts_pin;
 	int rts_pin;
 #endif
diff --git a/arch/m68k/include/asm/serial.h b/arch/m68k/include/asm/serial.h
index 7267536adbcc..06d0cb19b4e1 100644
--- a/arch/m68k/include/asm/serial.h
+++ b/arch/m68k/include/asm/serial.h
@@ -17,7 +17,7 @@
 #define BASE_BAUD ( 1843200 / 16 )
 
 /* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
+#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
 #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
 #define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
 #else
diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h
index 23a799293599..c1990218f18c 100644
--- a/arch/mn10300/include/asm/serial.h
+++ b/arch/mn10300/include/asm/serial.h
@@ -13,7 +13,7 @@
 #define _ASM_SERIAL_H
 
 /* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
+#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
 #define STD_COM_FLAGS	(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
 #define STD_COM4_FLAGS	(ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
 #else
@@ -21,7 +21,7 @@
 #define STD_COM4_FLAGS	ASYNC_BOOT_AUTOCONF
 #endif
 
-#ifdef CONFIG_SERIAL_MANY_PORTS
+#ifdef CONFIG_SERIAL_8250_MANY_PORTS
 #define FOURPORT_FLAGS	ASYNC_FOURPORT
 #define ACCENT_FLAGS	0
 #define BOCA_FLAGS	0
diff --git a/arch/x86/include/asm/serial.h b/arch/x86/include/asm/serial.h
index 8378b8c9109c..bb658211edad 100644
--- a/arch/x86/include/asm/serial.h
+++ b/arch/x86/include/asm/serial.h
@@ -11,7 +11,7 @@
 #define BASE_BAUD (1843200/16)
 
 /* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
+#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
 # define STD_COMX_FLAGS	(UPF_BOOT_AUTOCONF |	UPF_SKIP_TEST	| UPF_AUTO_IRQ)
 # define STD_COM4_FLAGS	(UPF_BOOT_AUTOCONF |	0		| UPF_AUTO_IRQ)
 #else