summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-10-01 12:26:52 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-10-01 12:26:52 -0700
commit3498d13b8090c0b0ef911409fbc503a7c4cca6ef (patch)
tree254ca00276e863d9fba25707690c66b2a04c49e9 /arch
parentdef7cb8cd4e3258db88050eaaca5438bcc3dafca (diff)
parent0c57dfcc6c1d037243c2f8fbf62eab3633326ec0 (diff)
downloadlinux-3498d13b8090c0b0ef911409fbc503a7c4cca6ef.tar.bz2
Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY changes from Greg Kroah-Hartman: "As we skipped the merge window for 3.6-rc1 for the tty tree, everything is now settled down and working properly, so we are ready for 3.7-rc1. Here's the patchset, it's big, but the large changes are removing a firmware file and adding a staging tty driver (it depended on the tty core changes, so it's going through this tree instead of the staging tree.) All of these patches have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up more-or-less trivial conflicts in - drivers/char/pcmcia/synclink_cs.c: tty NULL dereference fix vs tty_port_cts_enabled() helper function - drivers/staging/{Kconfig,Makefile}: add-add conflict (dgrp driver added close to other staging drivers) - drivers/staging/ipack/devices/ipoctal.c: "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device" * tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits) tty/serial: Add kgdb_nmi driver tty/serial/amba-pl011: Quiesce interrupts in poll_get_char tty/serial/amba-pl011: Implement poll_init callback tty/serial/core: Introduce poll_init callback kdb: Turn KGDB_KDB=n stubs into static inlines kdb: Implement disable_nmi command kernel/debug: Mask KGDB NMI upon entry serial: pl011: handle corruption at high clock speeds serial: sccnxp: Make 'default' choice in switch last serial: sccnxp: Remove mask termios caps for SW flow control serial: sccnxp: Report actual baudrate back to core serial: samsung: Add poll_get_char & poll_put_char Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate Powerpc 8xx CPM_UART maxidl should not depend on fifo size Powerpc 8xx CPM_UART too many interrupts Powerpc 8xx CPM_UART desynchronisation serial: set correct baud_base for EXSYS EX-41092 Dual 16950 serial: omap: fix the reciever line error case 8250: blacklist Winbond CIR port 8250_pnp: do pnp probe before legacy probe ...
Diffstat (limited to 'arch')
-rw-r--r--arch/alpha/kernel/srmcons.c1
-rw-r--r--arch/arm/mach-omap2/serial.c18
-rw-r--r--arch/arm/mach-ux500/board-mop500.c21
-rw-r--r--arch/arm/plat-omap/include/plat/omap-serial.h50
-rw-r--r--arch/ia64/hp/sim/simserial.c3
-rw-r--r--arch/m68k/emu/nfcon.c4
-rw-r--r--arch/mips/cavium-octeon/serial.c30
-rw-r--r--arch/mips/sni/a20r.c32
-rw-r--r--arch/parisc/kernel/pdc_cons.c1
-rw-r--r--arch/um/drivers/line.c3
-rw-r--r--arch/xtensa/platforms/iss/console.c1
11 files changed, 79 insertions, 85 deletions
diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c
index 3ea809430eda..5d5865204a1d 100644
--- a/arch/alpha/kernel/srmcons.c
+++ b/arch/alpha/kernel/srmcons.c
@@ -223,6 +223,7 @@ srmcons_init(void)
driver->subtype = SYSTEM_TYPE_SYSCONS;
driver->init_termios = tty_std_termios;
tty_set_operations(driver, &srmcons_ops);
+ tty_port_link_device(&srmcons_singleton.port, driver, 0);
err = tty_register_driver(driver);
if (err) {
put_tty_driver(driver);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index c1b93c752d70..9e80d209d138 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -81,8 +81,9 @@ static struct omap_uart_port_info omap_serial_default_info[] __initdata = {
};
#ifdef CONFIG_PM
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
+static void omap_uart_enable_wakeup(struct device *dev, bool enable)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od = to_omap_device(pdev);
if (!od)
@@ -99,15 +100,17 @@ static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
* in Smartidle Mode When Configured for DMA Operations.
* WA: configure uart in force idle mode.
*/
-static void omap_uart_set_noidle(struct platform_device *pdev)
+static void omap_uart_set_noidle(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od = to_omap_device(pdev);
omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
}
-static void omap_uart_set_smartidle(struct platform_device *pdev)
+static void omap_uart_set_smartidle(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od = to_omap_device(pdev);
u8 idlemode;
@@ -120,10 +123,10 @@ static void omap_uart_set_smartidle(struct platform_device *pdev)
}
#else
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
+static void omap_uart_enable_wakeup(struct device *dev, bool enable)
{}
-static void omap_uart_set_noidle(struct platform_device *pdev) {}
-static void omap_uart_set_smartidle(struct platform_device *pdev) {}
+static void omap_uart_set_noidle(struct device *dev) {}
+static void omap_uart_set_smartidle(struct device *dev) {}
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
@@ -304,6 +307,9 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
omap_up.dma_rx_timeout = info->dma_rx_timeout;
omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
omap_up.autosuspend_timeout = info->autosuspend_timeout;
+ omap_up.DTR_gpio = info->DTR_gpio;
+ omap_up.DTR_inverted = info->DTR_inverted;
+ omap_up.DTR_present = info->DTR_present;
pdata = &omap_up;
pdata_size = sizeof(struct omap_uart_port_info);
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index a534d8880de1..1d2e3c6f8b59 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -524,33 +524,12 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
};
#endif
-#define PRCC_K_SOFTRST_SET 0x18
-#define PRCC_K_SOFTRST_CLEAR 0x1C
-static void ux500_uart0_reset(void)
-{
- void __iomem *prcc_rst_set, *prcc_rst_clr;
-
- prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
- PRCC_K_SOFTRST_SET);
- prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
- PRCC_K_SOFTRST_CLEAR);
-
- /* Activate soft reset PRCC_K_SOFTRST_CLEAR */
- writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
- udelay(1);
-
- /* Release soft reset PRCC_K_SOFTRST_SET */
- writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
- udelay(1);
-}
-
static struct amba_pl011_data uart0_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart0_dma_cfg_rx,
.dma_tx_param = &uart0_dma_cfg_tx,
#endif
- .reset = ux500_uart0_reset,
};
static struct amba_pl011_data uart1_plat = {
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index 1a52725ffcf2..a531149823bb 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -18,7 +18,7 @@
#define __OMAP_SERIAL_H__
#include <linux/serial_core.h>
-#include <linux/platform_device.h>
+#include <linux/device.h>
#include <linux/pm_qos.h>
#include <plat/mux.h>
@@ -42,10 +42,10 @@
#define OMAP_UART_WER_MOD_WKUP 0X7F
/* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX 0x04
+#define OMAP_UART_SW_TX 0x8
/* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX 0x04
+#define OMAP_UART_SW_RX 0x2
#define OMAP_UART_SYSC_RESET 0X07
#define OMAP_UART_TCR_TRIG 0X0F
@@ -69,11 +69,14 @@ struct omap_uart_port_info {
unsigned int dma_rx_timeout;
unsigned int autosuspend_timeout;
unsigned int dma_rx_poll_rate;
+ int DTR_gpio;
+ int DTR_inverted;
+ int DTR_present;
int (*get_context_loss_count)(struct device *);
- void (*set_forceidle)(struct platform_device *);
- void (*set_noidle)(struct platform_device *);
- void (*enable_wakeup)(struct platform_device *, bool);
+ void (*set_forceidle)(struct device *);
+ void (*set_noidle)(struct device *);
+ void (*enable_wakeup)(struct device *, bool);
};
struct uart_omap_dma {
@@ -102,39 +105,4 @@ struct uart_omap_dma {
unsigned int rx_timeout;
};
-struct uart_omap_port {
- struct uart_port port;
- struct uart_omap_dma uart_dma;
- struct platform_device *pdev;
-
- unsigned char ier;
- unsigned char lcr;
- unsigned char mcr;
- unsigned char fcr;
- unsigned char efr;
- unsigned char dll;
- unsigned char dlh;
- unsigned char mdr1;
- unsigned char scr;
-
- int use_dma;
- /*
- * Some bits in registers are cleared on a read, so they must
- * be saved whenever the register is read but the bits will not
- * be immediately processed.
- */
- unsigned int lsr_break_flag;
- unsigned char msr_saved_flags;
- char name[20];
- unsigned long port_activity;
- u32 context_loss_cnt;
- u32 errata;
- u8 wakeups_enabled;
-
- struct pm_qos_request pm_qos_request;
- u32 latency;
- u32 calc_latency;
- struct work_struct qos_work;
-};
-
#endif /* __OMAP_SERIAL_H__ */
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index c34785dca92b..ec536e4e36c9 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -338,7 +338,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
}
}
@@ -545,6 +545,7 @@ static int __init simrs_init(void)
/* the port is imaginary */
printk(KERN_INFO "ttyS0 at 0x03f8 (irq = %d) is a 16550\n", state->irq);
+ tty_port_link_device(&state->port, hp_simserial_driver, 0);
retval = tty_register_driver(hp_simserial_driver);
if (retval) {
printk(KERN_ERR "Couldn't register simserial driver\n");
diff --git a/arch/m68k/emu/nfcon.c b/arch/m68k/emu/nfcon.c
index 8db25e806947..16d170f53bfd 100644
--- a/arch/m68k/emu/nfcon.c
+++ b/arch/m68k/emu/nfcon.c
@@ -19,6 +19,7 @@
#include <asm/natfeat.h>
static int stderr_id;
+static struct tty_port nfcon_tty_port;
static struct tty_driver *nfcon_tty_driver;
static void nfputs(const char *str, unsigned int count)
@@ -119,6 +120,8 @@ static int __init nfcon_init(void)
{
int res;
+ tty_port_init(&nfcon_tty_port);
+
stderr_id = nf_get_id("NF_STDERR");
if (!stderr_id)
return -ENODEV;
@@ -135,6 +138,7 @@ static int __init nfcon_init(void)
nfcon_tty_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(nfcon_tty_driver, &nfcon_tty_ops);
+ tty_port_link_device(&nfcon_tty_port, nfcon_tty_driver, 0);
res = tty_register_driver(nfcon_tty_driver);
if (res) {
pr_err("failed to register nfcon tty driver\n");
diff --git a/arch/mips/cavium-octeon/serial.c b/arch/mips/cavium-octeon/serial.c
index 138b2216b4f8..569f41bdcc46 100644
--- a/arch/mips/cavium-octeon/serial.c
+++ b/arch/mips/cavium-octeon/serial.c
@@ -47,40 +47,40 @@ static int __devinit octeon_serial_probe(struct platform_device *pdev)
{
int irq, res;
struct resource *res_mem;
- struct uart_port port;
+ struct uart_8250_port up;
/* All adaptors have an irq. */
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
- memset(&port, 0, sizeof(port));
+ memset(&up, 0, sizeof(up));
- port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
- port.type = PORT_OCTEON;
- port.iotype = UPIO_MEM;
- port.regshift = 3;
- port.dev = &pdev->dev;
+ up.port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
+ up.port.type = PORT_OCTEON;
+ up.port.iotype = UPIO_MEM;
+ up.port.regshift = 3;
+ up.port.dev = &pdev->dev;
if (octeon_is_simulation())
/* Make simulator output fast*/
- port.uartclk = 115200 * 16;
+ up.port.uartclk = 115200 * 16;
else
- port.uartclk = octeon_get_io_clock_rate();
+ up.port.uartclk = octeon_get_io_clock_rate();
- port.serial_in = octeon_serial_in;
- port.serial_out = octeon_serial_out;
- port.irq = irq;
+ up.port.serial_in = octeon_serial_in;
+ up.port.serial_out = octeon_serial_out;
+ up.port.irq = irq;
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res_mem == NULL) {
dev_err(&pdev->dev, "found no memory resource\n");
return -ENXIO;
}
- port.mapbase = res_mem->start;
- port.membase = ioremap(res_mem->start, resource_size(res_mem));
+ up.port.mapbase = res_mem->start;
+ up.port.membase = ioremap(res_mem->start, resource_size(res_mem));
- res = serial8250_register_port(&port);
+ res = serial8250_register_8250_port(&up);
return res >= 0 ? 0 : res;
}
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
index c48194c3073b..b2d4f492d782 100644
--- a/arch/mips/sni/a20r.c
+++ b/arch/mips/sni/a20r.c
@@ -133,6 +133,38 @@ static struct platform_device sc26xx_pdev = {
}
};
+#warning "Please try migrate to use new driver SCCNXP and report the status" \
+ "in the linux-serial mailing list."
+
+/* The code bellow is a replacement of SC26XX to SCCNXP */
+#if 0
+#include <linux/platform_data/sccnxp.h>
+
+static struct sccnxp_pdata sccnxp_data = {
+ .reg_shift = 2,
+ .frequency = 3686400,
+ .mctrl_cfg[0] = MCTRL_SIG(DTR_OP, LINE_OP7) |
+ MCTRL_SIG(RTS_OP, LINE_OP3) |
+ MCTRL_SIG(DSR_IP, LINE_IP5) |
+ MCTRL_SIG(DCD_IP, LINE_IP6),
+ .mctrl_cfg[1] = MCTRL_SIG(DTR_OP, LINE_OP2) |
+ MCTRL_SIG(RTS_OP, LINE_OP1) |
+ MCTRL_SIG(DSR_IP, LINE_IP0) |
+ MCTRL_SIG(CTS_IP, LINE_IP1) |
+ MCTRL_SIG(DCD_IP, LINE_IP2) |
+ MCTRL_SIG(RNG_IP, LINE_IP3),
+};
+
+static struct platform_device sc2681_pdev = {
+ .name = "sc2681",
+ .resource = sc2xxx_rsrc,
+ .num_resources = ARRAY_SIZE(sc2xxx_rsrc),
+ .dev = {
+ .platform_data = &sccnxp_data,
+ },
+};
+#endif
+
static u32 a20r_ack_hwint(void)
{
u32 status = read_c0_status();
diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c
index 47341aa208f2..88238638aee6 100644
--- a/arch/parisc/kernel/pdc_cons.c
+++ b/arch/parisc/kernel/pdc_cons.c
@@ -202,6 +202,7 @@ static int __init pdc_console_tty_driver_init(void)
pdc_console_tty_driver->flags = TTY_DRIVER_REAL_RAW |
TTY_DRIVER_RESET_TERMIOS;
tty_set_operations(pdc_console_tty_driver, &pdc_console_tty_ops);
+ tty_port_link_device(&tty_port, pdc_console_tty_driver, 0);
err = tty_register_driver(pdc_console_tty_driver);
if (err) {
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index bbaf2c59830a..457475f98414 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -409,7 +409,8 @@ int setup_one_line(struct line *lines, int n, char *init,
line->valid = 1;
err = parse_chan_pair(new, line, n, opts, error_out);
if (!err) {
- struct device *d = tty_register_device(driver, n, NULL);
+ struct device *d = tty_port_register_device(&line->port,
+ driver, n, NULL);
if (IS_ERR(d)) {
*error_out = "Failed to register device";
err = PTR_ERR(d);
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index f9726f6afdf1..2cd3d3a3400b 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -223,6 +223,7 @@ int __init rs_init(void)
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &serial_ops);
+ tty_port_link_device(&serial_port, serial_driver, 0);
if (tty_register_driver(serial_driver))
panic("Couldn't register serial driver\n");