summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2008-05-10 21:14:05 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2008-05-10 21:14:05 -0700
commit5bb7ff795fffc9418e3039cac77b42adcaae1a57 (patch)
treec6dca94cc723a0079d04d254e0407e85c1980c66 /arch
parent3e1b83ab3912a6f583897635bee0a2e0cd1545f7 (diff)
parent1f2ee6496b1f71e9d5aa2448745e65fbafdc3bd5 (diff)
downloadlinux-5bb7ff795fffc9418e3039cac77b42adcaae1a57.tar.bz2
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5033/1: Unbreak corgi_ssp by registering ssp drivers earlier. [ARM] Orion: clean up addr-map.c after window setting code purge [ARM] Orion: pass proper t_clk into mv643xx_eth [ARM] Orion: use mv643xx_eth driver mbus window handling [ARM] pxa: Fix RCSR handling [ARM] lubbock: fix compilation [ARM] 5032/1: Added cpufreq support for pxa27x CPU [ARM] 5031/1: Indentation correction in cpu-pxa.c. [ARM] 5028/1: pxafb: fix broken "backward compatibility way" in framebuffer [ARM] 4882/2: Correction for S3C2410 clkout generation [ARM] 5027/1: Fixed random memory corruption on pxa suspend cycle. [ARM] 5024/1: Fix some minor clk issues in the MMCI PL18x driver [ARM] 5023/1: Fix broken gpio interrupts on ep93xx ns9xxx: fix sparse warning ns9xxx: check for irq lockups ns9xxx: fix handle_prio_irq to unmask irqs with lower priority
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-ep93xx/core.c2
-rw-r--r--arch/arm/mach-ns9xxx/irq.c22
-rw-r--r--arch/arm/mach-orion5x/addr-map.c66
-rw-r--r--arch/arm/mach-orion5x/common.c9
-rw-r--r--arch/arm/mach-orion5x/common.h1
-rw-r--r--arch/arm/mach-pxa/Makefile12
-rw-r--r--arch/arm/mach-pxa/corgi.c4
-rw-r--r--arch/arm/mach-pxa/cpu-pxa.c310
-rw-r--r--arch/arm/mach-pxa/lubbock.c2
-rw-r--r--arch/arm/mach-pxa/pm.c10
-rw-r--r--arch/arm/mach-pxa/poodle.c2
-rw-r--r--arch/arm/mach-pxa/pxa25x.c11
-rw-r--r--arch/arm/mach-pxa/pxa27x.c11
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c7
-rw-r--r--arch/arm/mach-pxa/spitz.c2
-rw-r--r--arch/arm/mach-pxa/spitz_pm.c3
-rw-r--r--arch/arm/mach-pxa/tosa.c2
-rw-r--r--arch/arm/mach-sa1100/pm.c8
-rw-r--r--arch/arm/plat-s3c24xx/clock.c4
19 files changed, 269 insertions, 219 deletions
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 8bc187240542..1d7bca6aa441 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -280,7 +280,7 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
const int port = gpio >> 3;
const int port_mask = 1 << (gpio & 7);
- gpio_direction_output(gpio, gpio_get_value(gpio));
+ gpio_direction_input(gpio);
switch (type) {
case IRQT_RISING:
diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c
index 36e5835e6097..ca85d24cf39f 100644
--- a/arch/arm/mach-ns9xxx/irq.c
+++ b/arch/arm/mach-ns9xxx/irq.c
@@ -62,7 +62,7 @@ static struct irq_chip ns9xxx_chip = {
#if 0
#define handle_irq handle_level_irq
#else
-void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
+static void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
{
unsigned int cpu = smp_processor_id();
struct irqaction *action;
@@ -70,27 +70,35 @@ void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
spin_lock(&desc->lock);
- if (unlikely(desc->status & IRQ_INPROGRESS))
- goto out_unlock;
+ BUG_ON(desc->status & IRQ_INPROGRESS);
desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
kstat_cpu(cpu).irqs[irq]++;
action = desc->action;
if (unlikely(!action || (desc->status & IRQ_DISABLED)))
- goto out_unlock;
+ goto out_mask;
desc->status |= IRQ_INPROGRESS;
spin_unlock(&desc->lock);
action_ret = handle_IRQ_event(irq, action);
+ /* XXX: There is no direct way to access noirqdebug, so check
+ * unconditionally for spurious irqs...
+ * Maybe this function should go to kernel/irq/chip.c? */
+ note_interrupt(irq, desc, action_ret);
+
spin_lock(&desc->lock);
desc->status &= ~IRQ_INPROGRESS;
- if (!(desc->status & IRQ_DISABLED) && desc->chip->ack)
- desc->chip->ack(irq);
-out_unlock:
+ if (desc->status & IRQ_DISABLED)
+out_mask:
+ desc->chip->mask(irq);
+
+ /* ack unconditionally to unmask lower prio irqs */
+ desc->chip->ack(irq);
+
spin_unlock(&desc->lock);
}
#define handle_irq handle_prio_irq
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 9608503d67f5..e63fb05dc893 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -34,11 +34,7 @@
* Non-CPU Masters address decoding --
* Unlike the CPU, we setup the access from Orion's master interfaces to DDR
* banks only (the typical use case).
- * Setup access for each master to DDR is issued by common.c.
- *
- * Note: although orion_setbits() and orion_clrbits() are not atomic
- * no locking is necessary here since code in this file is only called
- * at boot time when there is no concurrency issues.
+ * Setup access for each master to DDR is issued by platform device setup.
*/
/*
@@ -48,10 +44,6 @@
#define TARGET_DEV_BUS 1
#define TARGET_PCI 3
#define TARGET_PCIE 4
-#define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \
- ((n) == 1) ? 0xd : \
- ((n) == 2) ? 0xb : \
- ((n) == 3) ? 0x7 : 0xf)
#define ATTR_PCIE_MEM 0x59
#define ATTR_PCIE_IO 0x51
#define ATTR_PCIE_WA 0x79
@@ -61,17 +53,12 @@
#define ATTR_DEV_CS1 0x1d
#define ATTR_DEV_CS2 0x1b
#define ATTR_DEV_BOOT 0xf
-#define WIN_EN 1
/*
* Helpers to get DDR bank info
*/
-#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) * 8))
-#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) * 8))
-#define DDR_MAX_CS 4
-#define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1)
-#define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000)
-#define DDR_BANK_EN 1
+#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3))
+#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3))
/*
* CPU Address Decode Windows registers
@@ -81,17 +68,6 @@
#define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4))
#define CPU_WIN_REMAP_HI(n) ORION5X_BRIDGE_REG(0x00c | ((n) << 4))
-/*
- * Gigabit Ethernet Address Decode Windows registers
- */
-#define ETH_WIN_BASE(win) ORION5X_ETH_REG(0x200 + ((win) * 8))
-#define ETH_WIN_SIZE(win) ORION5X_ETH_REG(0x204 + ((win) * 8))
-#define ETH_WIN_REMAP(win) ORION5X_ETH_REG(0x280 + ((win) * 4))
-#define ETH_WIN_EN ORION5X_ETH_REG(0x290)
-#define ETH_WIN_PROT ORION5X_ETH_REG(0x294)
-#define ETH_MAX_WIN 6
-#define ETH_MAX_REMAP_WIN 4
-
struct mbus_dram_target_info orion5x_mbus_dram_info;
@@ -202,39 +178,3 @@ void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
{
setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1);
}
-
-void __init orion5x_setup_eth_wins(void)
-{
- int i;
-
- /*
- * First, disable and clear windows
- */
- for (i = 0; i < ETH_MAX_WIN; i++) {
- orion5x_write(ETH_WIN_BASE(i), 0);
- orion5x_write(ETH_WIN_SIZE(i), 0);
- orion5x_setbits(ETH_WIN_EN, 1 << i);
- orion5x_clrbits(ETH_WIN_PROT, 0x3 << (i * 2));
- if (i < ETH_MAX_REMAP_WIN)
- orion5x_write(ETH_WIN_REMAP(i), 0);
- }
-
- /*
- * Setup windows for DDR banks.
- */
- for (i = 0; i < DDR_MAX_CS; i++) {
- u32 base, size;
- size = orion5x_read(DDR_SIZE_CS(i));
- base = orion5x_read(DDR_BASE_CS(i));
- if (size & DDR_BANK_EN) {
- base = DDR_REG_TO_BASE(base);
- size = DDR_REG_TO_SIZE(size);
- orion5x_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000);
- orion5x_write(ETH_WIN_BASE(i), (base & 0xffff0000) |
- (ATTR_DDR_CS(i) << 8) |
- TARGET_DDR);
- orion5x_clrbits(ETH_WIN_EN, 1 << i);
- orion5x_setbits(ETH_WIN_PROT, 0x3 << (i * 2));
- }
- }
-}
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 0ecff5a61972..4f13fd037f04 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -190,6 +190,11 @@ static struct platform_device orion5x_ehci1 = {
* (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
****************************************************************************/
+struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = {
+ .dram = &orion5x_mbus_dram_info,
+ .t_clk = ORION5X_TCLK,
+};
+
static struct resource orion5x_eth_shared_resources[] = {
{
.start = ORION5X_ETH_PHYS_BASE + 0x2000,
@@ -201,6 +206,9 @@ static struct resource orion5x_eth_shared_resources[] = {
static struct platform_device orion5x_eth_shared = {
.name = MV643XX_ETH_SHARED_NAME,
.id = 0,
+ .dev = {
+ .platform_data = &orion5x_eth_shared_data,
+ },
.num_resources = 1,
.resource = orion5x_eth_shared_resources,
};
@@ -362,7 +370,6 @@ void __init orion5x_init(void)
* Setup Orion address map
*/
orion5x_setup_cpu_mbus_bridge();
- orion5x_setup_eth_wins();
/*
* Register devices.
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 14adf8d1a54a..bd0f05de6e18 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -22,7 +22,6 @@ void orion5x_setup_dev0_win(u32 base, u32 size);
void orion5x_setup_dev1_win(u32 base, u32 size);
void orion5x_setup_dev2_win(u32 base, u32 size);
void orion5x_setup_pcie_wa_win(u32 base, u32 size);
-void orion5x_setup_eth_wins(void);
/*
* Shared code used internally by other Orion core functions.
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 6a830853aa6a..0e6d05bb81aa 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -5,6 +5,13 @@
# Common support (must be linked before board specific support)
obj-y += clock.o devices.o generic.o irq.o dma.o \
time.o gpio.o
+obj-$(CONFIG_PM) += pm.o sleep.o standby.o
+obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
+
+# Generic drivers that other drivers may depend upon
+obj-$(CONFIG_PXA_SSP) += ssp.o
+
+# SoC-specific code
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa25x.o
obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa27x.o
obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o
@@ -48,11 +55,6 @@ led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
obj-$(CONFIG_LEDS) += $(led-y)
-# Misc features
-obj-$(CONFIG_PM) += pm.o sleep.o standby.o
-obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
-obj-$(CONFIG_PXA_SSP) += ssp.o
-
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
endif
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 259ca821e464..b757dd756655 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -493,8 +493,6 @@ static struct platform_device *devices[] __initdata = {
static void corgi_poweroff(void)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
if (!machine_is_corgi())
/* Green LED off tells the bootloader to halt */
reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
@@ -503,8 +501,6 @@ static void corgi_poweroff(void)
static void corgi_restart(char mode)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
if (!machine_is_corgi())
/* Green LED on tells the bootloader to reboot */
set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c
index 4b21479332ae..fb9ba1ab2826 100644
--- a/arch/arm/mach-pxa/cpu-pxa.c
+++ b/arch/arm/mach-pxa/cpu-pxa.c
@@ -49,125 +49,216 @@ MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
#define freq_debug 0
#endif
+static unsigned int pxa27x_maxfreq;
+module_param(pxa27x_maxfreq, uint, 0);
+MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
+ "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
+
typedef struct {
unsigned int khz;
unsigned int membus;
unsigned int cccr;
unsigned int div2;
+ unsigned int cclkcfg;
} pxa_freqs_t;
/* Define the refresh period in mSec for the SDRAM and the number of rows */
-#define SDRAM_TREF 64 /* standard 64ms SDRAM */
-#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */
-#define MDREFR_DRI(x) (((x) * SDRAM_TREF) / (SDRAM_ROWS * 32))
-
-#define CCLKCFG_TURBO 0x1
-#define CCLKCFG_FCS 0x2
-#define PXA25x_MIN_FREQ 99500
-#define PXA25x_MAX_FREQ 398100
-#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
-#define MDREFR_DRI_MASK 0xFFF
+#define SDRAM_TREF 64 /* standard 64ms SDRAM */
+#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */
+#define CCLKCFG_TURBO 0x1
+#define CCLKCFG_FCS 0x2
+#define CCLKCFG_HALFTURBO 0x4
+#define CCLKCFG_FASTBUS 0x8
+#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
+#define MDREFR_DRI_MASK 0xFFF
+/*
+ * PXA255 definitions
+ */
/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
+#define CCLKCFG CCLKCFG_TURBO | CCLKCFG_FCS
+
static pxa_freqs_t pxa255_run_freqs[] =
{
- /* CPU MEMBUS CCCR DIV2*/
- { 99500, 99500, 0x121, 1}, /* run= 99, turbo= 99, PXbus=50, SDRAM=50 */
- {132700, 132700, 0x123, 1}, /* run=133, turbo=133, PXbus=66, SDRAM=66 */
- {199100, 99500, 0x141, 0}, /* run=199, turbo=199, PXbus=99, SDRAM=99 */
- {265400, 132700, 0x143, 1}, /* run=265, turbo=265, PXbus=133, SDRAM=66 */
- {331800, 165900, 0x145, 1}, /* run=331, turbo=331, PXbus=166, SDRAM=83 */
- {398100, 99500, 0x161, 0}, /* run=398, turbo=398, PXbus=196, SDRAM=99 */
- {0,}
+ /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
+ { 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */
+ {132700, 132700, 0x123, 1, CCLKCFG}, /* 133, 133, 66, 66 */
+ {199100, 99500, 0x141, 0, CCLKCFG}, /* 199, 199, 99, 99 */
+ {265400, 132700, 0x143, 1, CCLKCFG}, /* 265, 265, 133, 66 */
+ {331800, 165900, 0x145, 1, CCLKCFG}, /* 331, 331, 166, 83 */
+ {398100, 99500, 0x161, 0, CCLKCFG}, /* 398, 398, 196, 99 */
};
-#define NUM_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
-
-static struct cpufreq_frequency_table pxa255_run_freq_table[NUM_RUN_FREQS+1];
/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
static pxa_freqs_t pxa255_turbo_freqs[] =
{
- /* CPU MEMBUS CCCR DIV2*/
- { 99500, 99500, 0x121, 1}, /* run=99, turbo= 99, PXbus=50, SDRAM=50 */
- {199100, 99500, 0x221, 0}, /* run=99, turbo=199, PXbus=50, SDRAM=99 */
- {298500, 99500, 0x321, 0}, /* run=99, turbo=287, PXbus=50, SDRAM=99 */
- {298600, 99500, 0x1c1, 0}, /* run=199, turbo=287, PXbus=99, SDRAM=99 */
- {398100, 99500, 0x241, 0}, /* run=199, turbo=398, PXbus=99, SDRAM=99 */
- {0,}
+ /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
+ { 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */
+ {199100, 99500, 0x221, 0, CCLKCFG}, /* 99, 199, 50, 99 */
+ {298500, 99500, 0x321, 0, CCLKCFG}, /* 99, 287, 50, 99 */
+ {298600, 99500, 0x1c1, 0, CCLKCFG}, /* 199, 287, 99, 99 */
+ {398100, 99500, 0x241, 0, CCLKCFG}, /* 199, 398, 99, 99 */
+};
+
+#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
+#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
+
+static struct cpufreq_frequency_table
+ pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
+static struct cpufreq_frequency_table
+ pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
+
+/*
+ * PXA270 definitions
+ *
+ * For the PXA27x:
+ * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
+ *
+ * A = 0 => memory controller clock from table 3-7,
+ * A = 1 => memory controller clock = system bus clock
+ * Run mode frequency = 13 MHz * L
+ * Turbo mode frequency = 13 MHz * L * N
+ * System bus frequency = 13 MHz * L / (B + 1)
+ *
+ * In CCCR:
+ * A = 1
+ * L = 16 oscillator to run mode ratio
+ * 2N = 6 2 * (turbo mode to run mode ratio)
+ *
+ * In CCLKCFG:
+ * B = 1 Fast bus mode
+ * HT = 0 Half-Turbo mode
+ * T = 1 Turbo mode
+ *
+ * For now, just support some of the combinations in table 3-7 of
+ * PXA27x Processor Family Developer's Manual to simplify frequency
+ * change sequences.
+ */
+#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
+#define CCLKCFG2(B, HT, T) \
+ (CCLKCFG_FCS | \
+ ((B) ? CCLKCFG_FASTBUS : 0) | \
+ ((HT) ? CCLKCFG_HALFTURBO : 0) | \
+ ((T) ? CCLKCFG_TURBO : 0))
+
+static pxa_freqs_t pxa27x_freqs[] = {
+ {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1)},
+ {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1)},
+ {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1)},
+ {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1)},
+ {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1)},
+ {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1)},
+ {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1)}
};
-#define NUM_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
-static struct cpufreq_frequency_table pxa255_turbo_freq_table[NUM_TURBO_FREQS+1];
+#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
+static struct cpufreq_frequency_table
+ pxa27x_freq_table[NUM_PXA27x_FREQS+1];
extern unsigned get_clk_frequency_khz(int info);
+static void find_freq_tables(struct cpufreq_policy *policy,
+ struct cpufreq_frequency_table **freq_table,
+ pxa_freqs_t **pxa_freqs)
+{
+ if (cpu_is_pxa25x()) {
+ if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
+ *pxa_freqs = pxa255_run_freqs;
+ *freq_table = pxa255_run_freq_table;
+ } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
+ *pxa_freqs = pxa255_turbo_freqs;
+ *freq_table = pxa255_turbo_freq_table;
+ } else {
+ printk("CPU PXA: Unknown policy found. "
+ "Using CPUFREQ_POLICY_PERFORMANCE\n");
+ *pxa_freqs = pxa255_run_freqs;
+ *freq_table = pxa255_run_freq_table;
+ }
+ }
+ if (cpu_is_pxa27x()) {
+ *pxa_freqs = pxa27x_freqs;
+ *freq_table = pxa27x_freq_table;
+ }
+}
+
+static void pxa27x_guess_max_freq(void)
+{
+ if (!pxa27x_maxfreq) {
+ pxa27x_maxfreq = 416000;
+ printk(KERN_INFO "PXA CPU 27x max frequency not defined "
+ "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
+ pxa27x_maxfreq);
+ } else {
+ pxa27x_maxfreq *= 1000;
+ }
+}
+
+static u32 mdrefr_dri(unsigned int freq)
+{
+ u32 dri = 0;
+
+ if (cpu_is_pxa25x())
+ dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS * 32));
+ if (cpu_is_pxa27x())
+ dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS - 31)) / 32;
+ return dri;
+}
+
/* find a valid frequency point */
static int pxa_verify_policy(struct cpufreq_policy *policy)
{
struct cpufreq_frequency_table *pxa_freqs_table;
+ pxa_freqs_t *pxa_freqs;
int ret;
- if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
- pxa_freqs_table = pxa255_run_freq_table;
- } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
- pxa_freqs_table = pxa255_turbo_freq_table;
- } else {
- printk("CPU PXA: Unknown policy found. "
- "Using CPUFREQ_POLICY_PERFORMANCE\n");
- pxa_freqs_table = pxa255_run_freq_table;
- }
-
+ find_freq_tables(policy, &pxa_freqs_table, &pxa_freqs);
ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
if (freq_debug)
pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
- policy->min, policy->max);
+ policy->min, policy->max);
return ret;
}
+static unsigned int pxa_cpufreq_get(unsigned int cpu)
+{
+ return get_clk_frequency_khz(0);
+}
+
static int pxa_set_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
+ unsigned int target_freq,
+ unsigned int relation)
{
struct cpufreq_frequency_table *pxa_freqs_table;
pxa_freqs_t *pxa_freq_settings;
struct cpufreq_freqs freqs;
unsigned int idx;
unsigned long flags;
- unsigned int unused, preset_mdrefr, postset_mdrefr;
- void *ramstart = phys_to_virt(0xa0000000);
+ unsigned int new_freq_cpu, new_freq_mem;
+ unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
/* Get the current policy */
- if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
- pxa_freq_settings = pxa255_run_freqs;
- pxa_freqs_table = pxa255_run_freq_table;
- } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
- pxa_freq_settings = pxa255_turbo_freqs;
- pxa_freqs_table = pxa255_turbo_freq_table;
- } else {
- printk("CPU PXA: Unknown policy found. "
- "Using CPUFREQ_POLICY_PERFORMANCE\n");
- pxa_freq_settings = pxa255_run_freqs;
- pxa_freqs_table = pxa255_run_freq_table;
- }
+ find_freq_tables(policy, &pxa_freqs_table, &pxa_freq_settings);
/* Lookup the next frequency */
if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
- target_freq, relation, &idx)) {
+ target_freq, relation, &idx)) {
return -EINVAL;
}
+ new_freq_cpu = pxa_freq_settings[idx].khz;
+ new_freq_mem = pxa_freq_settings[idx].membus;
freqs.old = policy->cur;
- freqs.new = pxa_freq_settings[idx].khz;
+ freqs.new = new_freq_cpu;
freqs.cpu = policy->cpu;
if (freq_debug)
- pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
- freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
- (pxa_freq_settings[idx].membus / 2000) :
- (pxa_freq_settings[idx].membus / 1000));
+ pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
+ "(SDRAM %d Mhz)\n",
+ freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
+ (new_freq_mem / 2000) : (new_freq_mem / 1000));
/*
* Tell everyone what we're about to do...
@@ -177,16 +268,16 @@ static int pxa_set_target(struct cpufreq_policy *policy,
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
/* Calculate the next MDREFR. If we're slowing down the SDRAM clock
- * we need to preset the smaller DRI before the change. If we're speeding
- * up we need to set the larger DRI value after the change.
+ * we need to preset the smaller DRI before the change. If we're
+ * speeding up we need to set the larger DRI value after the change.
*/
preset_mdrefr = postset_mdrefr = MDREFR;
- if ((MDREFR & MDREFR_DRI_MASK) > MDREFR_DRI(pxa_freq_settings[idx].membus)) {
- preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK) |
- MDREFR_DRI(pxa_freq_settings[idx].membus);
+ if ((MDREFR & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
+ preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
+ preset_mdrefr |= mdrefr_dri(new_freq_mem);
}
- postset_mdrefr = (postset_mdrefr & ~MDREFR_DRI_MASK) |
- MDREFR_DRI(pxa_freq_settings[idx].membus);
+ postset_mdrefr =
+ (postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem);
/* If we're dividing the memory clock by two for the SDRAM clock, this
* must be set prior to the change. Clearing the divide must be done
@@ -201,26 +292,27 @@ static int pxa_set_target(struct cpufreq_policy *policy,
local_irq_save(flags);
- /* Set new the CCCR */
+ /* Set new the CCCR and prepare CCLKCFG */
CCCR = pxa_freq_settings[idx].cccr;
+ cclkcfg = pxa_freq_settings[idx].cclkcfg;
asm volatile(" \n\
ldr r4, [%1] /* load MDREFR */ \n\
b 2f \n\
- .align 5 \n\
+ .align 5 \n\
1: \n\
- str %4, [%1] /* preset the MDREFR */ \n\
+ str %3, [%1] /* preset the MDREFR */ \n\
mcr p14, 0, %2, c6, c0, 0 /* set CCLKCFG[FCS] */ \n\
- str %5, [%1] /* postset the MDREFR */ \n\
+ str %4, [%1] /* postset the MDREFR */ \n\
\n\
b 3f \n\
2: b 1b \n\
3: nop \n\
"
- : "=&r" (unused)
- : "r" (&MDREFR), "r" (CCLKCFG_TURBO|CCLKCFG_FCS), "r" (ramstart),
- "r" (preset_mdrefr), "r" (postset_mdrefr)
- : "r4", "r5");
+ : "=&r" (unused)
+ : "r" (&MDREFR), "r" (cclkcfg),
+ "r" (preset_mdrefr), "r" (postset_mdrefr)
+ : "r4", "r5");
local_irq_restore(flags);
/*
@@ -233,38 +325,57 @@ static int pxa_set_target(struct cpufreq_policy *policy,
return 0;
}
-static unsigned int pxa_cpufreq_get(unsigned int cpu)
-{
- return get_clk_frequency_khz(0);
-}
-
-static int pxa_cpufreq_init(struct cpufreq_policy *policy)
+static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
{
int i;
+ unsigned int freq;
+
+ /* try to guess pxa27x cpu */
+ if (cpu_is_pxa27x())
+ pxa27x_guess_max_freq();
/* set default policy and cpuinfo */
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
- policy->policy = CPUFREQ_POLICY_PERFORMANCE;
- policy->cpuinfo.max_freq = PXA25x_MAX_FREQ;
- policy->cpuinfo.min_freq = PXA25x_MIN_FREQ;
+ if (cpu_is_pxa25x())
+ policy->policy = CPUFREQ_POLICY_PERFORMANCE;
policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
- policy->cur = get_clk_frequency_khz(0); /* current freq */
+ policy->cur = get_clk_frequency_khz(0); /* current freq */
policy->min = policy->max = policy->cur;
- /* Generate the run cpufreq_frequency_table struct */
- for (i = 0; i < NUM_RUN_FREQS; i++) {
+ /* Generate pxa25x the run cpufreq_frequency_table struct */
+ for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
pxa255_run_freq_table[i].index = i;
}
-
pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
- /* Generate the turbo cpufreq_frequency_table struct */
- for (i = 0; i < NUM_TURBO_FREQS; i++) {
- pxa255_turbo_freq_table[i].frequency = pxa255_turbo_freqs[i].khz;
+
+ /* Generate pxa25x the turbo cpufreq_frequency_table struct */
+ for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
+ pxa255_turbo_freq_table[i].frequency =
+ pxa255_turbo_freqs[i].khz;
pxa255_turbo_freq_table[i].index = i;
}
pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
+ /* Generate the pxa27x cpufreq_frequency_table struct */
+ for (i = 0; i < NUM_PXA27x_FREQS; i++) {
+ freq = pxa27x_freqs[i].khz;
+ if (freq > pxa27x_maxfreq)
+ break;
+ pxa27x_freq_table[i].frequency = freq;
+ pxa27x_freq_table[i].index = i;
+ }
+ pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+ /*
+ * Set the policy's minimum and maximum frequencies from the tables
+ * just constructed. This sets cpuinfo.mxx_freq, min and max.
+ */
+ if (cpu_is_pxa25x())
+ cpufreq_frequency_table_cpuinfo(policy, pxa255_run_freq_table);
+ else if (cpu_is_pxa27x())
+ cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
+
printk(KERN_INFO "PXA CPU frequency change support initialized\n");
return 0;
@@ -275,26 +386,25 @@ static struct cpufreq_driver pxa_cpufreq_driver = {
.target = pxa_set_target,
.init = pxa_cpufreq_init,
.get = pxa_cpufreq_get,
- .name = "PXA25x",
+ .name = "PXA2xx",
};
static int __init pxa_cpu_init(void)
{
int ret = -ENODEV;
- if (cpu_is_pxa25x())
+ if (cpu_is_pxa25x() || cpu_is_pxa27x())
ret = cpufreq_register_driver(&pxa_cpufreq_driver);
return ret;
}
static void __exit pxa_cpu_exit(void)
{
- if (cpu_is_pxa25x())
- cpufreq_unregister_driver(&pxa_cpufreq_driver);
+ cpufreq_unregister_driver(&pxa_cpufreq_driver);
}
-MODULE_AUTHOR ("Intrinsyc Software Inc.");
-MODULE_DESCRIPTION ("CPU frequency changing driver for the PXA architecture");
+MODULE_AUTHOR("Intrinsyc Software Inc.");
+MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
MODULE_LICENSE("GPL");
module_init(pxa_cpu_init);
module_exit(pxa_cpu_exit);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 0993f4d1a0bc..7b9bdd0c6665 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -396,7 +396,7 @@ static struct pxafb_mach_info sharp_lm8v31 = {
.cmap_inverse = 0,
.cmap_static = 0,
.lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
- LCD_AC_BIAS_FREQ(255);
+ LCD_AC_BIAS_FREQ(255),
};
#define MMC_POLL_RATE msecs_to_jiffies(1000)
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index ec1bbf333a3a..7d4debbdcca3 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -42,20 +42,17 @@ int pxa_pm_enter(suspend_state_t state)
if (state != PM_SUSPEND_STANDBY) {
pxa_cpu_pm_fns->save(sleep_save);
/* before sleeping, calculate and save a checksum */
- for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
+ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
sleep_save_checksum += sleep_save[i];
}
- /* Clear reset status */
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
/* *** go zzz *** */
pxa_cpu_pm_fns->enter(state);
cpu_init();
if (state != PM_SUSPEND_STANDBY) {
/* after sleeping, validate the checksum */
- for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
+ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
checksum += sleep_save[i];
/* if invalid, display message and wait for a hardware reset */
@@ -101,7 +98,8 @@ static int __init pxa_pm_init(void)
return -EINVAL;
}
- sleep_save = kmalloc(pxa_cpu_pm_fns->save_size, GFP_KERNEL);
+ sleep_save = kmalloc(pxa_cpu_pm_fns->save_count * sizeof(unsigned long),
+ GFP_KERNEL);
if (!sleep_save) {
printk(KERN_ERR "failed to alloc memory for pm save\n");
return -ENOMEM;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index ca5ac196b47b..0b30f25cff3c 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -326,13 +326,11 @@ static struct platform_device *devices[] __initdata = {
static void poodle_poweroff(void)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
arm_machine_restart('h');
}
static void poodle_restart(char mode)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
arm_machine_restart('h');
}
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index d9b5450aee5b..e5b417d14bb0 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -150,9 +150,7 @@ static struct clk pxa25x_clks[] = {
* More ones like CP and general purpose register values are preserved
* with the stack pointer in sleep.S.
*/
-enum { SLEEP_SAVE_START = 0,
-
- SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
+enum { SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
@@ -162,7 +160,7 @@ enum { SLEEP_SAVE_START = 0,
SLEEP_SAVE_CKEN,
- SLEEP_SAVE_SIZE
+ SLEEP_SAVE_COUNT
};
@@ -200,6 +198,9 @@ static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
static void pxa25x_cpu_pm_enter(suspend_state_t state)
{
+ /* Clear reset status */
+ RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
switch (state) {
case PM_SUSPEND_MEM:
/* set resume return address */
@@ -210,7 +211,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state)
}
static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = {
- .save_size = SLEEP_SAVE_SIZE,
+ .save_count = SLEEP_SAVE_COUNT,
.valid = suspend_valid_only_mem,
.save = pxa25x_cpu_pm_save,
.restore = pxa25x_cpu_pm_restore,
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 7a2449dd0fd4..7e945836e129 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -181,9 +181,7 @@ static struct clk pxa27x_clks[] = {
* More ones like CP and general purpose register values are preserved
* with the stack pointer in sleep.S.
*/
-enum { SLEEP_SAVE_START = 0,
-
- SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
+enum { SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
@@ -198,7 +196,7 @@ enum { SLEEP_SAVE_START = 0,
SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
- SLEEP_SAVE_SIZE
+ SLEEP_SAVE_COUNT
};
void pxa27x_cpu_pm_save(unsigned long *sleep_save)
@@ -251,6 +249,9 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
/* Clear edge-detect status register. */
PEDR = 0xDF12FE1B;
+ /* Clear reset status */
+ RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
switch (state) {
case PM_SUSPEND_STANDBY:
pxa_cpu_standby();
@@ -269,7 +270,7 @@ static int pxa27x_cpu_pm_valid(suspend_state_t state)
}
static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
- .save_size = SLEEP_SAVE_SIZE,
+ .save_count = SLEEP_SAVE_COUNT,
.save = pxa27x_cpu_pm_save,
.restore = pxa27x_cpu_pm_restore,
.valid = pxa27x_cpu_pm_valid,
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index b6a6f5fcc77a..644550bfa330 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -256,12 +256,11 @@ static unsigned long wakeup_src;
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
-enum { SLEEP_SAVE_START = 0,
- SLEEP_SAVE_CKENA,
+enum { SLEEP_SAVE_CKENA,
SLEEP_SAVE_CKENB,
SLEEP_SAVE_ACCR,
- SLEEP_SAVE_SIZE,
+ SLEEP_SAVE_COUNT,
};
static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
@@ -376,7 +375,7 @@ static int pxa3xx_cpu_pm_valid(suspend_state_t state)
}
static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
- .save_size = SLEEP_SAVE_SIZE,
+ .save_count = SLEEP_SAVE_COUNT,
.save = pxa3xx_cpu_pm_save,
.restore = pxa3xx_cpu_pm_restore,
.valid = pxa3xx_cpu_pm_valid,
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 62a02c3927c5..e7d0fcd9b43f 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -529,8 +529,6 @@ static struct platform_device *devices[] __initdata = {
static void spitz_poweroff(void)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT);
GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET);
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 7a7f5f947cc5..23f050feb208 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -119,9 +119,6 @@ static void spitz_presuspend(void)
/* nRESET_OUT Disable */
PSLR |= PSLR_SL_ROD;
- /* Clear reset status */
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
PCFR = PCFR_GPR_EN | PCFR_OPDE;
}
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 6458f6d371d9..c2cbd66db814 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -467,8 +467,6 @@ static struct platform_device *devices[] __initdata = {
static void tosa_poweroff(void)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 246c573e7252..1693d447a224 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -43,20 +43,18 @@ extern void sa1100_cpu_resume(void);
* More ones like CP and general purpose register values are preserved
* on the stack and then the stack pointer is stored last in sleep.S.
*/
-enum { SLEEP_SAVE_SP = 0,
-
- SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR,
+enum { SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR,
SLEEP_SAVE_PPDR, SLEEP_SAVE_PPSR, SLEEP_SAVE_PPAR, SLEEP_SAVE_PSDR,
SLEEP_SAVE_Ser1SDCR0,
- SLEEP_SAVE_SIZE
+ SLEEP_SAVE_COUNT
};
static int sa11x0_pm_enter(suspend_state_t state)
{
- unsigned long gpio, sleep_save[SLEEP_SAVE_SIZE];
+ unsigned long gpio, sleep_save[SLEEP_SAVE_COUNT];
gpio = GPLR;
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index d84167fb33b1..3ac8d8d781b3 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -411,7 +411,7 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
clk->parent = parent;
- if (clk == &s3c24xx_dclk0)
+ if (clk == &s3c24xx_clkout0)
mask = S3C2410_MISCCR_CLK0_MASK;
else {
source <<= 4;
@@ -437,7 +437,7 @@ struct clk s3c24xx_dclk0 = {
struct clk s3c24xx_dclk1 = {
.name = "dclk1",
.id = -1,
- .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
+ .ctrlbit = S3C2410_DCLKCON_DCLK1EN,
.enable = s3c24xx_dclk_enable,
.set_parent = s3c24xx_dclk_setparent,
.set_rate = s3c24xx_set_dclk_rate,