Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel config: Fix the APB_TIMER selection
  x86/mrst: Add additional debug prints for pb_keys
  x86/intel config: Revamp configuration to allow for Moorestown and Medfield
  x86/intel/scu/ipc: Match the changes in the x86 configuration
  x86/apb: Fix configuration constraints
  x86: Fix INTEL_MID silly
  x86/Kconfig: Cyclone-timer depends on x86-summit
  x86: Reduce clock calibration time during slave cpu startup
  x86/config: Revamp configuration for MID devices
  x86/sfi: Kill the IRQ as id hack

10 files changed, 70 insertions, 21 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 2513da0e6b67..a150f4c35e94 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -420,12 +420,14 @@ config X86_MRST
 	depends on PCI
 	depends on PCI_GOANY
 	depends on X86_IO_APIC
+	select X86_INTEL_MID
+	select SFI
+	select DW_APB_TIMER
 	select APB_TIMER
 	select I2C
 	select SPI
 	select INTEL_SCU_IPC
 	select X86_PLATFORM_DEVICES
-	select X86_INTEL_MID
 	---help---
 	  Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
 	  Internet Device(MID) platform. Moorestown consists of two chips:
@@ -434,6 +436,26 @@ config X86_MRST
 	  nor standard legacy replacement devices/features. e.g. Moorestown does
 	  not contain i8259, i8254, HPET, legacy BIOS, most of the io ports.
 
+config X86_MDFLD
+       bool "Medfield MID platform"
+	depends on PCI
+	depends on PCI_GOANY
+	depends on X86_IO_APIC
+	select X86_INTEL_MID
+	select SFI
+	select DW_APB_TIMER
+	select APB_TIMER
+	select I2C
+	select SPI
+	select INTEL_SCU_IPC
+	select X86_PLATFORM_DEVICES
+	---help---
+	  Medfield is Intel's Low Power Intel Architecture (LPIA) based Moblin
+	  Internet Device(MID) platform. 
+	  Unlike standard x86 PCs, Medfield does not have many legacy devices
+	  nor standard legacy replacement devices/features. e.g. Medfield does
+	  not contain i8259, i8254, HPET, legacy BIOS, most of the io ports.
+
 endif
 
 config X86_RDC321X
@@ -631,7 +653,7 @@ config X86_SUMMIT_NUMA
 
 config X86_CYCLONE_TIMER
 	def_bool y
-	depends on X86_32_NON_STANDARD
+	depends on X86_SUMMIT
 
 source "arch/x86/Kconfig.cpu"
 
@@ -659,9 +681,10 @@ config HPET_EMULATE_RTC
 	depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y)
 
 config APB_TIMER
-       def_bool y if MRST
-       prompt "Langwell APB Timer Support" if X86_MRST
+       def_bool y if X86_INTEL_MID
+       prompt "Intel MID APB Timer Support" if X86_INTEL_MID
        select DW_APB_TIMER
+       depends on X86_INTEL_MID && SFI
        help
          APB timer is the replacement for 8254, HPET on X86 MID platforms.
          The APBT provides a stable time base on SMP
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index aa4158f3ce62..e46c2147397f 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -43,9 +43,9 @@ config EARLY_PRINTK
 	  with klogd/syslogd or the X server. You should normally N here,
 	  unless you want to debug such a crash.
 
-config EARLY_PRINTK_MRST
-	bool "Early printk for MRST platform support"
-	depends on EARLY_PRINTK && X86_MRST
+config EARLY_PRINTK_INTEL_MID
+	bool "Early printk for Intel MID platform support"
+	depends on EARLY_PRINTK && X86_INTEL_MID
 
 config EARLY_PRINTK_DBGP
 	bool "Early printk via EHCI debug port"
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 460c74e4852c..4da3c0c4c974 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -117,7 +117,7 @@ enum fixed_addresses {
 #endif
 	FIX_TEXT_POKE1,	/* reserve 2 pages for text_poke() */
 	FIX_TEXT_POKE0, /* first page is last, because allocation is backward */
-#ifdef	CONFIG_X86_MRST
+#ifdef	CONFIG_X86_INTEL_MID
 	FIX_LNW_VRTC,
 #endif
 	__end_of_permanent_fixed_addresses,
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 9756551ec760..d0f19f9fb846 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -47,7 +47,7 @@ extern void reserve_standard_io_resources(void);
 extern void i386_reserve_resources(void);
 extern void setup_default_timer_irq(void);
 
-#ifdef CONFIG_X86_MRST
+#ifdef CONFIG_X86_INTEL_MID
 extern void x86_mrst_early_setup(void);
 #else
 static inline void x86_mrst_early_setup(void) { }
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 9d42a52d2331..9b9f18b49918 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -240,7 +240,7 @@ static int __init setup_early_printk(char *buf)
 		if (!strncmp(buf, "xen", 3))
 			early_console_register(&xenboot_console, keep);
 #endif
-#ifdef CONFIG_EARLY_PRINTK_MRST
+#ifdef CONFIG_EARLY_PRINTK_INTEL_MID
 		if (!strncmp(buf, "mrst", 4)) {
 			mrst_early_console_init();
 			early_console_register(&early_mrst_console, keep);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 79f636bc44c6..66d250c00d11 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -207,23 +207,29 @@ static void __cpuinit smp_callin(void)
 	 * Need to setup vector mappings before we enable interrupts.
 	 */
 	setup_vector_irq(smp_processor_id());
+
+	/*
+	 * Save our processor parameters. Note: this information
+	 * is needed for clock calibration.
+	 */
+	smp_store_cpu_info(cpuid);
+
 	/*
 	 * Get our bogomips.
+	 * Update loops_per_jiffy in cpu_data. Previous call to
+	 * smp_store_cpu_info() stored a value that is close but not as
+	 * accurate as the value just calculated.
 	 *
 	 * Need to enable IRQs because it can take longer and then
 	 * the NMI watchdog might kill us.
 	 */
 	local_irq_enable();
 	calibrate_delay();
+	cpu_data(cpuid).loops_per_jiffy = loops_per_jiffy;
 	local_irq_disable();
 	pr_debug("Stack at about %p\n", &cpuid);
 
 	/*
-	 * Save our processor parameters
-	 */
-	smp_store_cpu_info(cpuid);
-
-	/*
 	 * This must be done before setting cpu_online_mask
 	 * or calling notify_cpu_starting.
 	 */
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 2c9cf0fd78f5..c0dd5b603749 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -995,3 +995,23 @@ void __init tsc_init(void)
 	check_system_tsc_reliable();
 }
 
+#ifdef CONFIG_SMP
+/*
+ * If we have a constant TSC and are using the TSC for the delay loop,
+ * we can skip clock calibration if another cpu in the same socket has already
+ * been calibrated. This assumes that CONSTANT_TSC applies to all
+ * cpus in the socket - this should be a safe assumption.
+ */
+unsigned long __cpuinit calibrate_delay_is_known(void)
+{
+	int i, cpu = smp_processor_id();
+
+	if (!tsc_disabled && !cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC))
+		return 0;
+
+	for_each_online_cpu(i)
+		if (cpu_data(i).phys_proc_id == cpu_data(cpu).phys_proc_id)
+			return cpu_data(i).loops_per_jiffy;
+	return 0;
+}
+#endif
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index 6b8759f7634e..75b06f34b1f2 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_X86_VISWS)		+= visws.o
 
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 
-obj-$(CONFIG_X86_MRST)		+= mrst.o
+obj-$(CONFIG_X86_INTEL_MID)	+= mrst.o
 
 obj-y				+= common.o early.o
 obj-y				+= amd_bus.o bus_numa.o
diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile
index 1ea38775a6d3..7baed5135e0f 100644
--- a/arch/x86/platform/mrst/Makefile
+++ b/arch/x86/platform/mrst/Makefile
@@ -1,4 +1,4 @@
-obj-$(CONFIG_X86_MRST)		+= mrst.o
-obj-$(CONFIG_X86_MRST)		+= vrtc.o
-obj-$(CONFIG_EARLY_PRINTK_MRST)	+= early_printk_mrst.o
+obj-$(CONFIG_X86_INTEL_MID)	+= mrst.o
+obj-$(CONFIG_X86_INTEL_MID)	+= vrtc.o
+obj-$(CONFIG_EARLY_PRINTK_INTEL_MID)	+= early_printk_mrst.o
 obj-$(CONFIG_X86_MRST)		+= pmu.o
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index ad4ec1cb097e..475e2cd0f3c3 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -848,8 +848,7 @@ static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry)
 	if (mrst_has_msic())
 		return;
 
-	/* ID as IRQ is a hack that will go away */
-	pdev = platform_device_alloc(entry->name, entry->irq);
+	pdev = platform_device_alloc(entry->name, 0);
 	if (pdev == NULL) {
 		pr_err("out of memory for SFI platform device '%s'.\n",
 			entry->name);
@@ -1030,6 +1029,7 @@ static int __init pb_keys_init(void)
 	num = sizeof(gpio_button) / sizeof(struct gpio_keys_button);
 	for (i = 0; i < num; i++) {
 		gb[i].gpio = get_gpio_by_name(gb[i].desc);
+		pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc, gb[i].gpio);
 		if (gb[i].gpio == -1)
 			continue;