summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-10-11 10:21:48 +0900
committerLinus Torvalds <torvalds@linux-foundation.org>2012-10-11 10:21:48 +0900
commitda06a8d7bed2f3bfc12979384b2d1247ec4873db (patch)
treeed60bec05c7d69d94ad048d404321ce759a48868 /arch
parent49999ab27eab6289a8e4f450e148bdab521361b2 (diff)
parent6bd5dbda2adeabba69c969886511e501a65b6e3c (diff)
downloadlinux-da06a8d7bed2f3bfc12979384b2d1247ec4873db.tar.bz2
Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson: "A series of fixes (and in some cases, some cleanups): Via Tony Lindgren: - A collection of OMAP regression fixes, in particular because firmware no longer sets up all pin states before starting the kernel. - cpufreq fixes for OMAP (Rafael is on vacation and this was pre-agreed). - A longer series of misc regression fixes and cleanups, warning removals, etc for OMAP From Arnd Bergmann: - A series of warning fixes for various platforms (defconfig builds) Misc: - A couple of tegra fixes, one for i.MX, some vt8500 fixes, etc." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: pxa: armcore: fix PCI PIO warnings ARM: integrator: use __iomem pointers for MMIO, part 2 ARM: assabet: fix bogus warning in get_assabet_scr (again) ARM: shmobile: mark shmobile_init_late as __init ARM: integrator_cp: fix build failure ARM: OMAP4/AM335x: hwmod: fix disable_module regression in hardreset handling ARM: OMAP3: fix workaround for EMU clockdomain arm/omap: Replace board_ref_clock with enum values ARM: OMAP2+: remove duplicated include from board-omap3stalker.c arch/arm/plat-omap/omap-pm-noop.c: Remove unecessary semicolon arch/arm/mach-omap2: Remove unecessary semicolon arch/arm/mach-omap1/devices.c: Remove unecessary semicolon ARM/dts: omap5-evm: pinmux configuration for audio ARM/dts: Add pinctrl driver entries for omap5 ARM/dts: omap4-panda: pinmux configuration for audio ARM/dts: omap4-sdp: pinmux configuration for audio ARM/dts: omap5-evm: Disable unused McBSP3 ARM/dts: omap4-sdp: Disable unused McBSP3 ARM/dts: omap4-panda: Disable unused audio IPs ARM: OMAP: board-omap4panda: Pin mux configuration for audio needs ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig3
-rw-r--r--arch/arm/boot/dts/Makefile15
-rw-r--r--arch/arm/boot/dts/omap4-panda.dts47
-rw-r--r--arch/arm/boot/dts/omap4-sdp.dts57
-rw-r--r--arch/arm/boot/dts/omap5-evm.dts58
-rw-r--r--arch/arm/boot/dts/omap5.dtsi17
-rw-r--r--arch/arm/boot/dts/tegra20-seaboard.dts2
-rw-r--r--arch/arm/boot/dts/tegra20.dtsi4
-rw-r--r--arch/arm/common/it8152.c12
-rw-r--r--arch/arm/mach-at91/pm.c5
-rw-r--r--arch/arm/mach-at91/setup.c2
-rw-r--r--arch/arm/mach-davinci/da850.c2
-rw-r--r--arch/arm/mach-footbridge/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-integrator/include/mach/cm.h2
-rw-r--r--arch/arm/mach-integrator/include/mach/platform.h6
-rw-r--r--arch/arm/mach-integrator/integrator_ap.c2
-rw-r--r--arch/arm/mach-integrator/integrator_cp.c4
-rw-r--r--arch/arm/mach-iop13xx/iq81340sc.c2
-rw-r--r--arch/arm/mach-iop13xx/pci.c2
-rw-r--r--arch/arm/mach-ks8695/include/mach/memory.h3
-rw-r--r--arch/arm/mach-mv78xx0/addr-map.c2
-rw-r--r--arch/arm/mach-mv78xx0/common.c2
-rw-r--r--arch/arm/mach-omap1/devices.c2
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c26
-rw-r--r--arch/arm/mach-omap2/board-flash.c2
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c2
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c3
-rw-r--r--arch/arm/mach-omap2/board-omap3stalker.c5
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c18
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c2
-rw-r--r--arch/arm/mach-omap2/board-zoom-peripherals.c3
-rw-r--r--arch/arm/mach-omap2/clkt_clksel.c2
-rw-r--r--arch/arm/mach-omap2/clock33xx_data.c2
-rw-r--r--arch/arm/mach-omap2/clockdomain2xxx_3xxx.c44
-rw-r--r--arch/arm/mach-omap2/display.c2
-rw-r--r--arch/arm/mach-omap2/gpmc.c4
-rw-r--r--arch/arm/mach-omap2/hsmmc.c2
-rw-r--r--arch/arm/mach-omap2/mux.c2
-rw-r--r--arch/arm/mach-omap2/omap-secure.c4
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c31
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c9
-rw-r--r--arch/arm/mach-omap2/opp.c23
-rw-r--r--arch/arm/mach-omap2/pm-debug.c2
-rw-r--r--arch/arm/mach-omap2/pm.c13
-rw-r--r--arch/arm/mach-omap2/sr_device.c2
-rw-r--r--arch/arm/mach-omap2/timer.c2
-rw-r--r--arch/arm/mach-omap2/twl-common.c2
-rw-r--r--arch/arm/mach-pxa/cm-x2xx.c1
-rw-r--r--arch/arm/mach-pxa/palmte2.c2
-rw-r--r--arch/arm/mach-pxa/sharpsl_pm.c48
-rw-r--r--arch/arm/mach-pxa/viper.c3
-rw-r--r--arch/arm/mach-rpc/ecard.c4
-rw-r--r--arch/arm/mach-s3c24xx/irq-s3c2416.c6
-rw-r--r--arch/arm/mach-s3c24xx/irq-s3c2443.c4
-rw-r--r--arch/arm/mach-s3c24xx/simtec-usb.c2
-rw-r--r--arch/arm/mach-sa1100/assabet.c2
-rw-r--r--arch/arm/mach-shark/pci.c2
-rw-r--r--arch/arm/mach-shmobile/include/mach/common.h2
-rw-r--r--arch/arm/mach-tegra/Kconfig6
-rw-r--r--arch/arm/mach-ux500/Kconfig4
-rw-r--r--arch/arm/mach-vt8500/include/mach/uncompress.h8
-rw-r--r--arch/arm/mach-vt8500/vt8500.c5
-rw-r--r--arch/arm/plat-omap/Kconfig2
-rw-r--r--arch/arm/plat-omap/counter_32k.c21
-rw-r--r--arch/arm/plat-omap/omap-pm-noop.c8
-rw-r--r--arch/arm/plat-omap/omap_device.c2
67 files changed, 410 insertions, 184 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e40eefb5d32d..767aae8277fa 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -494,7 +494,6 @@ config ARCH_IOP32X
depends on MMU
select CPU_XSCALE
select NEED_MACH_GPIO_H
- select NEED_MACH_IO_H
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
@@ -508,7 +507,6 @@ config ARCH_IOP33X
depends on MMU
select CPU_XSCALE
select NEED_MACH_GPIO_H
- select NEED_MACH_IO_H
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
@@ -1772,6 +1770,7 @@ source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
int "Maximum zone order" if ARCH_SHMOBILE
range 11 64 if ARCH_SHMOBILE
+ default "12" if SOC_AM33XX
default "9" if SA1111
default "11"
help
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 29f541f0e653..c1ce813fcc4a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -25,14 +25,6 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4210-trats.dtb \
exynos5250-smdk5250.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
-dtb-$(CONFIG_ARCH_IMX5) += imx51-babbage.dtb \
- imx53-ard.dtb \
- imx53-evk.dtb \
- imx53-qsb.dtb \
- imx53-smd.dtb
-dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
- imx6q-sabrelite.dtb \
- imx6q-sabresd.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
kirkwood-dns325.dtb \
@@ -76,7 +68,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap4-pandaES.dtb \
omap4-var_som.dtb \
omap4-sdp.dtb \
- omap5-evm.dtb
+ omap5-evm.dtb \
+ am335x-evm.dtb \
+ am335x-bone.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
@@ -104,5 +98,8 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
vexpress-v2p-ca15-tc1.dtb \
vexpress-v2p-ca15_a7.dtb \
xenvm-4.2.dtb
+dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
+ wm8505-ref.dtb \
+ wm8650-mid.dtb
endif
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 20b966ee1bb3..e8f927cbb376 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -59,6 +59,41 @@
};
};
+&omap4_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &twl6040_pins
+ &mcpdm_pins
+ &mcbsp1_pins
+ >;
+
+ twl6040_pins: pinmux_twl6040_pins {
+ pinctrl-single,pins = <
+ 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
+ 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */
+ >;
+ };
+
+ mcpdm_pins: pinmux_mcpdm_pins {
+ pinctrl-single,pins = <
+ 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */
+ 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */
+ 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */
+ 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */
+ 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
+ >;
+ };
+
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */
+ 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */
+ 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */
+ 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
+ >;
+ };
+};
+
&i2c1 {
clock-frequency = <400000>;
@@ -137,3 +172,15 @@
cs1-used;
device-handle = <&elpida_ECB240ABACN>;
};
+
+&mcbsp2 {
+ status = "disabled";
+};
+
+&mcbsp3 {
+ status = "disabled";
+};
+
+&dmic {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 94a23b39033d..5b7e04fbff50 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -117,6 +117,15 @@
};
&omap4_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &twl6040_pins
+ &mcpdm_pins
+ &dmic_pins
+ &mcbsp1_pins
+ &mcbsp2_pins
+ >;
+
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
0xd8 0x118 /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */
@@ -141,6 +150,50 @@
0x11e 0 /* uart4_tx.uart4_tx OUTPUT | MODE0 */
>;
};
+
+ twl6040_pins: pinmux_twl6040_pins {
+ pinctrl-single,pins = <
+ 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
+ 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */
+ >;
+ };
+
+ mcpdm_pins: pinmux_mcpdm_pins {
+ pinctrl-single,pins = <
+ 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */
+ 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */
+ 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */
+ 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */
+ 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
+ >;
+ };
+
+ dmic_pins: pinmux_dmic_pins {
+ pinctrl-single,pins = <
+ 0xd0 0 /* abe_dmic_clk1.abe_dmic_clk1 OUTPUT | MODE0 */
+ 0xd2 0x100 /* abe_dmic_din1.abe_dmic_din1 INPUT | MODE0 */
+ 0xd4 0x100 /* abe_dmic_din2.abe_dmic_din2 INPUT | MODE0 */
+ 0xd6 0x100 /* abe_dmic_din3.abe_dmic_din3 INPUT | MODE0 */
+ >;
+ };
+
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */
+ 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */
+ 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */
+ 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
+ >;
+ };
+
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ 0xb6 0x100 /* abe_mcbsp2_clkx.abe_mcbsp2_clkx INPUT | MODE0 */
+ 0xb8 0x108 /* abe_mcbsp2_dr.abe_mcbsp2_dr INPUT PULLDOWN | MODE0 */
+ 0xba 0x8 /* abe_mcbsp2_dx.abe_mcbsp2_dx OUTPUT PULLDOWN | MODE0 */
+ 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
+ >;
+ };
};
&i2c1 {
@@ -349,3 +402,7 @@
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins>;
};
+
+&mcbsp3 {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
index 9c41a3f311aa..c663eba73168 100644
--- a/arch/arm/boot/dts/omap5-evm.dts
+++ b/arch/arm/boot/dts/omap5-evm.dts
@@ -27,6 +27,60 @@
};
+&omap5_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &twl6040_pins
+ &mcpdm_pins
+ &dmic_pins
+ &mcbsp1_pins
+ &mcbsp2_pins
+ >;
+
+ twl6040_pins: pinmux_twl6040_pins {
+ pinctrl-single,pins = <
+ 0x18a 0x6 /* perslimbus2_clock.gpio5_145 OUTPUT | MODE6 */
+ >;
+ };
+
+ mcpdm_pins: pinmux_mcpdm_pins {
+ pinctrl-single,pins = <
+ 0x142 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
+ 0x15c 0x108 /* abemcpdm_ul_data.abemcpdm_ul_data INPUT PULLDOWN | MODE0 */
+ 0x15e 0x108 /* abemcpdm_dl_data.abemcpdm_dl_data INPUT PULLDOWN | MODE0 */
+ 0x160 0x118 /* abemcpdm_frame.abemcpdm_frame INPUT PULLUP | MODE0 */
+ 0x162 0x108 /* abemcpdm_lb_clk.abemcpdm_lb_clk INPUT PULLDOWN | MODE0 */
+ >;
+ };
+
+ dmic_pins: pinmux_dmic_pins {
+ pinctrl-single,pins = <
+ 0x144 0x100 /* abedmic_din1.abedmic_din1 INPUT | MODE0 */
+ 0x146 0x100 /* abedmic_din2.abedmic_din2 INPUT | MODE0 */
+ 0x148 0x100 /* abedmic_din3.abedmic_din3 INPUT | MODE0 */
+ 0x14a 0 /* abedmic_clk1.abedmic_clk1 OUTPUT | MODE0 */
+ >;
+ };
+
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ 0x14c 0x101 /* abedmic_clk2.abemcbsp1_fsx INPUT | MODE1 */
+ 0x14e 0x9 /* abedmic_clk3.abemcbsp1_dx OUTPUT PULLDOWN | MODE1 */
+ 0x150 0x101 /* abeslimbus1_clock.abemcbsp1_clkx INPUT | MODE0 */
+ 0x152 0x109 /* abeslimbus1_data.abemcbsp1_dr INPUT PULLDOWN | MODE1 */
+ >;
+ };
+
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ 0x154 0x108 /* abemcbsp2_dr.abemcbsp2_dr INPUT PULLDOWN | MODE0 */
+ 0x156 0x8 /* abemcbsp2_dx.abemcbsp2_dx OUTPUT PULLDOWN | MODE0 */
+ 0x158 0x100 /* abemcbsp2_fsx.abemcbsp2_fsx INPUT | MODE0 */
+ 0x15a 0x100 /* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */
+ >;
+ };
+};
+
&mmc1 {
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <4>;
@@ -82,3 +136,7 @@
0x020700d9>; /* SEARCH */
linux,input-no-autorepeat;
};
+
+&mcbsp3 {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 5db33f481a33..42c78beb4fdc 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -77,6 +77,23 @@
ranges;
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+ omap5_pmx_core: pinmux@4a002840 {
+ compatible = "ti,omap4-padconf", "pinctrl-single";
+ reg = <0x4a002840 0x01b6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+ omap5_pmx_wkup: pinmux@4ae0c840 {
+ compatible = "ti,omap4-padconf", "pinctrl-single";
+ reg = <0x4ae0c840 0x0038>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+
gic: interrupt-controller@48211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index e60dc7124e92..f0ba901676ac 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -539,7 +539,7 @@
nvidia,invert-interrupt;
};
- memory-controller@0x7000f400 {
+ memory-controller@7000f400 {
emc-table@190000 {
reg = <190000>;
compatible = "nvidia,tegra20-emc-table";
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 67a6cd910b96..f3a09d0d45bc 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -170,7 +170,7 @@
reg = <0x7000e400 0x400>;
};
- memory-controller@0x7000f000 {
+ memory-controller@7000f000 {
compatible = "nvidia,tegra20-mc";
reg = <0x7000f000 0x024
0x7000f03c 0x3c4>;
@@ -183,7 +183,7 @@
0x58000000 0x02000000>; /* GART aperture */
};
- memory-controller@0x7000f400 {
+ memory-controller@7000f400 {
compatible = "nvidia,tegra20-emc";
reg = <0x7000f400 0x200>;
#address-cells = <1>;
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index c4110d1b1f2d..001f4913799c 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -284,11 +284,17 @@ int dma_set_coherent_mask(struct device *dev, u64 mask)
int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
{
- it8152_io.start = IT8152_IO_BASE + 0x12000;
- it8152_io.end = IT8152_IO_BASE + 0x12000 + 0x100000;
+ /*
+ * FIXME: use pci_ioremap_io to remap the IO space here and
+ * move over to the generic io.h implementation.
+ * This requires solving the same problem for PXA PCMCIA
+ * support.
+ */
+ it8152_io.start = (unsigned long)IT8152_IO_BASE + 0x12000;
+ it8152_io.end = (unsigned long)IT8152_IO_BASE + 0x12000 + 0x100000;
sys->mem_offset = 0x10000000;
- sys->io_offset = IT8152_IO_BASE;
+ sys->io_offset = (unsigned long)IT8152_IO_BASE;
if (request_resource(&ioport_resource, &it8152_io)) {
printk(KERN_ERR "PCI: unable to allocate IO region\n");
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 2c2d86505a54..5315f05896e9 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -153,7 +153,9 @@ static int at91_pm_verify_clocks(void)
}
}
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+ if (!IS_ENABLED(CONFIG_AT91_PROGRAMMABLE_CLOCKS))
+ return 1;
+
/* PCK0..PCK3 must be disabled, or configured to use clk32k */
for (i = 0; i < 4; i++) {
u32 css;
@@ -167,7 +169,6 @@ static int at91_pm_verify_clocks(void)
return 0;
}
}
-#endif
return 1;
}
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index e6f52de1062f..da9881b161e1 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -87,7 +87,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
iotable_init(desc, 1);
}
-static struct map_desc at91_io_desc __initdata = {
+static struct map_desc at91_io_desc __initdata __maybe_unused = {
.virtual = (unsigned long)AT91_VA_BASE_SYS,
.pfn = __phys_to_pfn(AT91_BASE_SYS),
.length = SZ_16K,
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 6676dee7104e..e517e1036b09 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -939,7 +939,7 @@ static struct platform_device da850_cpufreq_device = {
unsigned int da850_max_speed = 300000;
-int __init da850_register_cpufreq(char *async_clk)
+int da850_register_cpufreq(char *async_clk)
{
int i;
diff --git a/arch/arm/mach-footbridge/include/mach/irqs.h b/arch/arm/mach-footbridge/include/mach/irqs.h
index 400551e43e4e..61c714c4920e 100644
--- a/arch/arm/mach-footbridge/include/mach/irqs.h
+++ b/arch/arm/mach-footbridge/include/mach/irqs.h
@@ -89,8 +89,6 @@
#define IRQ_NETWINDER_VGA _ISA_IRQ(11)
#define IRQ_NETWINDER_SOUND _ISA_IRQ(12)
-#undef RTC_IRQ
-#define RTC_IRQ IRQ_ISA_RTC_ALARM
#define I8042_KBD_IRQ IRQ_ISA_KEYBOARD
#define I8042_AUX_IRQ (machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE)
#define IRQ_FLOPPYDISK IRQ_ISA_FLOPPY
diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h
index 1a78692e32a4..202e6a57f100 100644
--- a/arch/arm/mach-integrator/include/mach/cm.h
+++ b/arch/arm/mach-integrator/include/mach/cm.h
@@ -3,7 +3,7 @@
*/
void cm_control(u32, u32);
-#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL)
+#define CM_CTRL __io_address(INTEGRATOR_HDR_CTRL)
#define CM_CTRL_LED (1 << 0)
#define CM_CTRL_nMBDET (1 << 1)
diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h
index 4c0347526851..efeac5d0bc9e 100644
--- a/arch/arm/mach-integrator/include/mach/platform.h
+++ b/arch/arm/mach-integrator/include/mach/platform.h
@@ -324,9 +324,9 @@
*/
#define PHYS_PCI_V3_BASE 0x62000000
-#define PCI_MEMORY_VADDR 0xe8000000
-#define PCI_CONFIG_VADDR 0xec000000
-#define PCI_V3_VADDR 0xed000000
+#define PCI_MEMORY_VADDR IOMEM(0xe8000000)
+#define PCI_CONFIG_VADDR IOMEM(0xec000000)
+#define PCI_V3_VADDR IOMEM(0xed000000)
/* ------------------------------------------------------------------------
* Integrator Interrupt Controllers
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index d5b5435a09ae..e6617c134faf 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -157,7 +157,7 @@ static struct map_desc ap_io_desc[] __initdata = {
static void __init ap_map_io(void)
{
iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
- vga_base = PCI_MEMORY_VADDR;
+ vga_base = (unsigned long)PCI_MEMORY_VADDR;
pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE));
}
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 6870a1fbcd78..5b08e8e4cc83 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -261,6 +261,8 @@ static void __init intcp_init_early(void)
#endif
}
+#ifdef CONFIG_OF
+
static void __init intcp_timer_init_of(void)
{
struct device_node *node;
@@ -297,8 +299,6 @@ static struct sys_timer cp_of_timer = {
.init = intcp_timer_init_of,
};
-#ifdef CONFIG_OF
-
static const struct of_device_id fpga_irq_of_match[] __initconst = {
{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
{ /* Sentinel */ }
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index 060cddde2fd4..e94744111634 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -30,7 +30,7 @@
extern int init_atu;
static int __init
-iq81340sc_atux_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
+iq81340sc_atux_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin)
{
WARN_ON(idsel < 1 || idsel > 2);
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 9082b84aeebb..2f28018c4447 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -504,7 +504,7 @@ iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
/* Scan an IOP13XX PCI bus. nr selects which ATU we use.
*/
-struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __devinit iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
{
int which_atu;
struct pci_bus *bus = NULL;
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index f7e1b9bce345..95e731a7ed6a 100644
--- a/arch/arm/mach-ks8695/include/mach/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -34,7 +34,8 @@ extern struct bus_type platform_bus_type;
#define __arch_dma_to_virt(dev, x) ({ (void *) (is_lbus_device(dev) ? \
__phys_to_virt(x) : __bus_to_virt(x)); })
#define __arch_virt_to_dma(dev, x) ({ is_lbus_device(dev) ? \
- (dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
+ (dma_addr_t)__virt_to_phys((unsigned long)x) \
+ : (dma_addr_t)__virt_to_bus(x); })
#define __arch_pfn_to_dma(dev, pfn) \
({ dma_addr_t __dma = __pfn_to_phys(pfn); \
if (!is_lbus_device(dev)) \
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
index 343c435b4176..26e9876b50e9 100644
--- a/arch/arm/mach-mv78xx0/addr-map.c
+++ b/arch/arm/mach-mv78xx0/addr-map.c
@@ -54,7 +54,7 @@ static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, i
/*
* Description of the windows needed by the platform code
*/
-static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+static struct orion_addr_map_cfg addr_map_cfg __initdata = {
.num_wins = 14,
.remappable_wins = 8,
.win_cfg_base = win_cfg_base,
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 131cd4883f3d..d0cb4857b4b3 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -336,7 +336,7 @@ void __init mv78xx0_init_early(void)
orion_time_set_base(TIMER_VIRT_BASE);
}
-static void mv78xx0_timer_init(void)
+static void __init_refok mv78xx0_timer_init(void)
{
orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
IRQ_MV78XX0_TIMER_1, get_tclk());
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 726c02c9c0cd..d3fec92c54cb 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -231,7 +231,7 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
omap_mmc_add("mmci-omap", i, base, size, irq,
rx_req, tx_req, mmc_data[i]);
- };
+ }
}
#endif
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index a88809a59ea9..5ff28afbefe7 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -830,6 +830,32 @@ static struct omap_board_mux board_mux[] __initdata = {
/* NIRQ2 for twl6040 */
OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
+ /* GPIO_127 for twl6040 */
+ OMAP4_MUX(HDQ_SIO, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
+ /* McPDM */
+ OMAP4_MUX(ABE_PDM_UL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_PDM_DL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_PDM_FRAME, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+ OMAP4_MUX(ABE_PDM_LB_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_CLKS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ /* DMIC */
+ OMAP4_MUX(ABE_DMIC_CLK1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP4_MUX(ABE_DMIC_DIN1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP4_MUX(ABE_DMIC_DIN2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP4_MUX(ABE_DMIC_DIN3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ /* McBSP1 */
+ OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
+ OMAP_PULL_ENA),
+ OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ /* McBSP2 */
+ OMAP4_MUX(ABE_MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP4_MUX(ABE_MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
+ OMAP_PULL_ENA),
+ OMAP4_MUX(ABE_MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 0cabe61cd507..e642acf9cad0 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -218,7 +218,7 @@ void __init board_flash_init(struct flash_partitions partition_info[],
if (onenandcs > GPMC_CS_NUM)
onenandcs = cs;
break;
- };
+ }
cs++;
}
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index a08bebc94ec5..388c431c745a 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -461,7 +461,7 @@ static void __init beagle_opp_init(void)
mpu_dev = omap_device_get_by_hwmod_name("mpu");
iva_dev = omap_device_get_by_hwmod_name("iva");
- if (!mpu_dev || !iva_dev) {
+ if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) {
pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
__func__, mpu_dev, iva_dev);
return;
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index a3959de85e05..b9b776b6c954 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -88,11 +88,10 @@ enum {
static u8 omap3_evm_version;
-u8 get_omap3_evm_rev(void)
+static u8 get_omap3_evm_rev(void)
{
return omap3_evm_version;
}
-EXPORT_SYMBOL(get_omap3_evm_rev);
static void __init omap3_evm_get_revision(void)
{
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index c7f3d026e6d4..731235eb319e 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -48,11 +48,6 @@
#include <video/omap-panel-tfp410.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/interrupt.h>
-#include <linux/smsc911x.h>
-#include <linux/i2c/at24.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mux.h"
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 2b012f9d6925..f62b903f3ea1 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -247,8 +247,7 @@ static struct platform_device omap_vwlan_device = {
};
static struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
- /* PANDA ref clock is 38.4 MHz */
- .board_ref_clock = 2,
+ .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
};
static struct twl6040_codec_data twl6040_codec = {
@@ -388,6 +387,21 @@ static struct omap_board_mux board_mux[] __initdata = {
/* NIRQ2 for twl6040 */
OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
+ /* GPIO_127 for twl6040 */
+ OMAP4_MUX(HDQ_SIO, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
+ /* McPDM */
+ OMAP4_MUX(ABE_PDM_UL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_PDM_DL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_PDM_FRAME, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+ OMAP4_MUX(ABE_PDM_LB_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_CLKS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ /* McBSP1 */
+ OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
+ OMAP_PULL_ENA),
+ OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index ed85fb898c7f..020e03c95bfe 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -748,7 +748,7 @@ static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module =
.subdev_board_info = &rx51_si4713_board_info,
};
-static struct platform_device rx51_si4713_dev = {
+static struct platform_device rx51_si4713_dev __initdata_or_module = {
.name = "radio-si4713",
.id = -1,
.dev = {
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 67f8540c8e07..c166fe1fdff9 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -195,8 +195,7 @@ static struct platform_device omap_vwlan_device = {
};
static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
- /* ZOOM ref clock is 26 MHz */
- .board_ref_clock = 1,
+ .board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */
};
static struct omap2_hsmmc_info mmc[] = {
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
index eaed3900a83c..3ff22114d702 100644
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -382,7 +382,7 @@ void omap2_init_clksel_parent(struct clk *clk)
__clk_get_name(parent) :
"NULL"));
clk_reparent(clk, clks->parent);
- };
+ }
found = 1;
}
}
diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c
index b87b88c2638b..114ab4b8e0e3 100644
--- a/arch/arm/mach-omap2/clock33xx_data.c
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@@ -1035,6 +1035,8 @@ static struct omap_clk am33xx_clks[] = {
CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk, CK_AM33XX),
CLK("davinci-mcasp.0", NULL, &mcasp0_fck, CK_AM33XX),
CLK("davinci-mcasp.1", NULL, &mcasp1_fck, CK_AM33XX),
+ CLK(NULL, "mcasp0_fck", &mcasp0_fck, CK_AM33XX),
+ CLK(NULL, "mcasp1_fck", &mcasp1_fck, CK_AM33XX),
CLK("NULL", "mmc2_fck", &mmc2_fck, CK_AM33XX),
CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX),
CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX),
diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
index 9a7792aec673..70294f54e35a 100644
--- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
@@ -183,17 +183,6 @@ static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
if (!clkdm->clktrctrl_mask)
return 0;
- /*
- * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
- * more details on the unpleasant problem this is working
- * around
- */
- if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
- !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
- _enable_hwsup(clkdm);
- return 0;
- }
-
hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
@@ -217,17 +206,6 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
if (!clkdm->clktrctrl_mask)
return 0;
- /*
- * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
- * more details on the unpleasant problem this is working
- * around
- */
- if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
- (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
- omap3_clkdm_wakeup(clkdm);
- return 0;
- }
-
hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
@@ -269,6 +247,17 @@ static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
if (!clkdm->clktrctrl_mask)
return 0;
+ /*
+ * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+ * more details on the unpleasant problem this is working
+ * around
+ */
+ if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
+ (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
+ omap3_clkdm_wakeup(clkdm);
+ return 0;
+ }
+
hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
@@ -292,6 +281,17 @@ static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
if (!clkdm->clktrctrl_mask)
return 0;
+ /*
+ * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+ * more details on the unpleasant problem this is working
+ * around
+ */
+ if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
+ !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+ _enable_hwsup(clkdm);
+ return 0;
+ }
+
hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 7012068ccbf6..a51ece491b91 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -221,7 +221,7 @@ static struct platform_device *create_dss_pdev(const char *pdev_name,
ohs[0] = oh;
od = omap_device_alloc(pdev, ohs, 1, NULL, 0);
- if (!od) {
+ if (IS_ERR(od)) {
pr_err("Could not alloc omap_device for %s\n", pdev_name);
r = -ENOMEM;
goto err;
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 8ab1e1bde5e9..5ac5cf30406a 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -838,7 +838,7 @@ static int gpmc_setup_irq(void)
return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
}
-static __exit int gpmc_free_irq(void)
+static __devexit int gpmc_free_irq(void)
{
int i;
@@ -944,7 +944,7 @@ static __devinit int gpmc_probe(struct platform_device *pdev)
return 0;
}
-static __exit int gpmc_remove(struct platform_device *pdev)
+static __devexit int gpmc_remove(struct platform_device *pdev)
{
gpmc_free_irq();
gpmc_mem_exit();
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 03ebf47cfa9a..4d3a6324155f 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -523,7 +523,7 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
od = omap_device_alloc(pdev, ohs, 1, NULL, 0);
- if (!od) {
+ if (IS_ERR(od)) {
pr_err("Could not allocate od for %s\n", name);
goto put_pdev;
}
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 9fe6829f4c16..701e17cba468 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -486,7 +486,7 @@ void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state)
default:
/* Nothing to be done */
break;
- };
+ }
if (val >= 0) {
omap_mux_write(pad->partition, val,
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index a004cb9acf52..e089e4d1ae38 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -61,8 +61,8 @@ int __init omap_secure_ram_reserve_memblock(void)
{
u32 size = OMAP_SECURE_RAM_STORAGE;
- size = ALIGN(size, SZ_1M);
- omap_secure_memblock_base = arm_memblock_steal(size, SZ_1M);
+ size = ALIGN(size, SECTION_SIZE);
+ omap_secure_memblock_base = arm_memblock_steal(size, SECTION_SIZE);
return 0;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 299ca2821ad1..b969ab1d258b 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1698,6 +1698,29 @@ static bool _are_all_hardreset_lines_asserted(struct omap_hwmod *oh)
}
/**
+ * _are_any_hardreset_lines_asserted - return true if any part of @oh is
+ * hard-reset
+ * @oh: struct omap_hwmod *
+ *
+ * If any hardreset lines associated with @oh are asserted, then
+ * return true. Otherwise, if no hardreset lines associated with @oh
+ * are asserted, or if @oh has no hardreset lines, then return false.
+ * This function is used to avoid executing some parts of the IP block
+ * enable/disable sequence if any hardreset line is set.
+ */
+static bool _are_any_hardreset_lines_asserted(struct omap_hwmod *oh)
+{
+ int rst_cnt = 0;
+ int i;
+
+ for (i = 0; i < oh->rst_lines_cnt && rst_cnt == 0; i++)
+ if (_read_hardreset(oh, oh->rst_lines[i].name) > 0)
+ rst_cnt++;
+
+ return (rst_cnt) ? true : false;
+}
+
+/**
* _omap4_disable_module - enable CLKCTRL modulemode on OMAP4
* @oh: struct omap_hwmod *
*
@@ -1715,7 +1738,7 @@ static int _omap4_disable_module(struct omap_hwmod *oh)
* Since integration code might still be doing something, only
* disable if all lines are under hardreset.
*/
- if (!_are_all_hardreset_lines_asserted(oh))
+ if (_are_any_hardreset_lines_asserted(oh))
return 0;
pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
@@ -1749,12 +1772,12 @@ static int _am33xx_disable_module(struct omap_hwmod *oh)
pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
+ if (_are_any_hardreset_lines_asserted(oh))
+ return 0;
+
am33xx_cm_module_disable(oh->clkdm->cm_inst, oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
- if (_are_all_hardreset_lines_asserted(oh))
- return 0;
-
v = _am33xx_wait_target_disable(oh);
if (v)
pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index 35dcdb66a4e0..bd9220ed5ab9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -219,7 +219,7 @@ struct omap_hwmod omap2xxx_l4_wkup_hwmod = {
/* MPU */
static struct omap_hwmod_irq_info omap2xxx_mpu_irqs[] = {
- { .name = "pmu", .irq = 3 },
+ { .name = "pmu", .irq = 3 + OMAP_INTC_START },
{ .irq = -1 }
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 285777241d5a..f67b7ee07dd4 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -94,7 +94,7 @@ static struct omap_hwmod omap3xxx_l4_sec_hwmod = {
/* MPU */
static struct omap_hwmod_irq_info omap3xxx_mpu_irqs[] = {
- { .name = "pmu", .irq = 3 },
+ { .name = "pmu", .irq = 3 + OMAP_INTC_START },
{ .irq = -1 }
};
@@ -3683,6 +3683,7 @@ static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__usb_tll_hs,
&omap3xxx_l4_core__es3plus_mmc1,
&omap3xxx_l4_core__es3plus_mmc2,
+ &omap3xxx_l4_core__hdq1w,
&am35xx_mdio__l3,
&am35xx_l4_core__mdio,
&am35xx_emac__l3,
@@ -3737,7 +3738,7 @@ int __init omap3xxx_hwmod_init(void)
} else {
WARN(1, "OMAP3 hwmod family init: unknown chip type\n");
return -EINVAL;
- };
+ }
r = omap_hwmod_register_links(h);
if (r < 0)
@@ -3754,7 +3755,7 @@ int __init omap3xxx_hwmod_init(void)
rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
rev == OMAP3430_REV_ES3_1_2) {
h = omap3430es2plus_hwmod_ocp_ifs;
- };
+ }
if (h) {
r = omap_hwmod_register_links(h);
@@ -3769,7 +3770,7 @@ int __init omap3xxx_hwmod_init(void)
} else if (rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
rev == OMAP3430_REV_ES3_1_2) {
h = omap3430_es3plus_hwmod_ocp_ifs;
- };
+ }
if (h)
r = omap_hwmod_register_links(h);
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index 45ad7f74f356..58e16aef40bb 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -18,6 +18,7 @@
*/
#include <linux/module.h>
#include <linux/opp.h>
+#include <linux/cpu.h>
#include <plat/omap_device.h>
@@ -62,13 +63,23 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def,
__func__, i);
return -EINVAL;
}
- oh = omap_hwmod_lookup(opp_def->hwmod_name);
- if (!oh || !oh->od) {
- pr_debug("%s: no hwmod or odev for %s, [%d] cannot add OPPs.\n",
- __func__, opp_def->hwmod_name, i);
- continue;
+
+ if (!strncmp(opp_def->hwmod_name, "mpu", 3)) {
+ /*
+ * All current OMAPs share voltage rail and
+ * clock source, so CPU0 is used to represent
+ * the MPU-SS.
+ */
+ dev = get_cpu_device(0);
+ } else {
+ oh = omap_hwmod_lookup(opp_def->hwmod_name);
+ if (!oh || !oh->od) {
+ pr_debug("%s: no hwmod or odev for %s, [%d] cannot add OPPs.\n",
+ __func__, opp_def->hwmod_name, i);
+ continue;
+ }
+ dev = &oh->od->pdev->dev;
}
- dev = &oh->od->pdev->dev;
r = opp_add(dev, opp_def->freq, opp_def->u_volt);
if (r) {
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 3e1345fc0713..46092cd806fa 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -168,7 +168,7 @@ static int pm_dbg_open(struct inode *inode, struct file *file)
default:
return single_open(file, pm_dbg_show_timers,
&inode->i_private);
- };
+ }
}
static const struct file_operations debug_fops = {
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index abefbc4d8e0b..ea61c32957bd 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -16,6 +16,7 @@
#include <linux/opp.h>
#include <linux/export.h>
#include <linux/suspend.h>
+#include <linux/cpu.h>
#include <asm/system_misc.h>
@@ -169,7 +170,15 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
goto exit;
}
- dev = omap_device_get_by_hwmod_name(oh_name);
+ if (!strncmp(oh_name, "mpu", 3))
+ /*
+ * All current OMAPs share voltage rail and clock
+ * source, so CPU0 is used to represent the MPU-SS.
+ */
+ dev = get_cpu_device(0);
+ else
+ dev = omap_device_get_by_hwmod_name(oh_name);
+
if (IS_ERR(dev)) {
pr_err("%s: Unable to get dev pointer for hwmod %s\n",
__func__, oh_name);
@@ -177,7 +186,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
}
voltdm = voltdm_lookup(vdd_name);
- if (IS_ERR(voltdm)) {
+ if (!voltdm) {
pr_err("%s: unable to get vdd pointer for vdd_%s\n",
__func__, vdd_name);
goto exit;
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index cbeae56b56a9..f8217a5a4a26 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -122,7 +122,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
sr_data->senp_mod = 0x1;
sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name);
- if (IS_ERR(sr_data->voltdm)) {
+ if (!sr_data->voltdm) {
pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
__func__, sr_dev_attr->sensor_voltdm_name);
goto exit;
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 8847d6eb2313..44f9aa7ec0c0 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -378,7 +378,7 @@ static void __init realtime_counter_init(void)
return;
}
sys_clk = clk_get(NULL, "sys_clkin_ck");
- if (!sys_clk) {
+ if (IS_ERR(sys_clk)) {
pr_err("%s: failed to get system clock handle\n", __func__);
iounmap(base);
return;
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 18a851959425..d83ae4540b9b 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -158,7 +158,7 @@ static struct regulator_init_data omap3_vpll2_idata = {
};
static struct regulator_consumer_supply omap3_vdd1_supply[] = {
- REGULATOR_SUPPLY("vcc", "mpu.0"),
+ REGULATOR_SUPPLY("vcc", "cpu0"),
};
static struct regulator_consumer_supply omap3_vdd2_supply[] = {
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index fc3afc7cd366..a103c8ffea9f 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -22,6 +22,7 @@
#include <asm/mach/map.h>
#include <mach/pxa25x.h>
+#undef GPIO24_SSP1_SFRM
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <linux/platform_data/video-pxafb.h>
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 997e6da9a9c4..32e0d7998355 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -105,6 +105,7 @@ static struct pxamci_platform_data palmte2_mci_platform_data = {
.gpio_power = GPIO_NR_PALMTE2_SD_POWER,
};
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
/******************************************************************************
* GPIO keys
******************************************************************************/
@@ -132,6 +133,7 @@ static struct platform_device palmte2_pxa_keys = {
.platform_data = &palmte2_pxa_keys_data,
},
};
+#endif
/******************************************************************************
* Backlight
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 5a406f794798..ec55c575ed19 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -55,7 +55,6 @@
#ifdef CONFIG_PM
static int sharpsl_off_charge_battery(void);
static int sharpsl_check_battery_voltage(void);
-static int sharpsl_fatal_check(void);
#endif
static int sharpsl_check_battery_temp(void);
static int sharpsl_ac_check(void);
@@ -686,53 +685,6 @@ static int corgi_pxa_pm_enter(suspend_state_t state)
return 0;
}
-/*
- * Check for fatal battery errors
- * Fatal returns -1
- */
-static int sharpsl_fatal_check(void)
-{
- int buff[5], temp, i, acin;
-
- dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
-
- /* Check AC-Adapter */
- acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
- if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
- sharpsl_pm.machinfo->charge(0);
- udelay(100);
- sharpsl_pm.machinfo->discharge(1); /* enable discharge */
- mdelay(SHARPSL_WAIT_DISCHARGE_ON);
- }
-
- if (sharpsl_pm.machinfo->discharge1)
- sharpsl_pm.machinfo->discharge1(1);
-
- /* Check battery : check inserting battery ? */
- for (i = 0; i < 5; i++) {
- buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
- mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
- }
-
- if (sharpsl_pm.machinfo->discharge1)
- sharpsl_pm.machinfo->discharge1(0);
-
- if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
- udelay(100);
- sharpsl_pm.machinfo->charge(1);
- sharpsl_pm.machinfo->discharge(0);
- }
-
- temp = get_select_val(buff);
- dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
-
- if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
- (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
- return -1;
- return 0;
-}
-
static int sharpsl_off_charge_error(void)
{
dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 392412ce4dac..c773e4dded64 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -768,8 +768,7 @@ static unsigned long viper_tpm;
static int __init viper_tpm_setup(char *str)
{
- strict_strtoul(str, 10, &viper_tpm);
- return 1;
+ return strict_strtoul(str, 10, &viper_tpm) >= 0;
}
__setup("tpm=", viper_tpm_setup);
diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c
index b91bc87b3dcf..fcb1d59f7aec 100644
--- a/arch/arm/mach-rpc/ecard.c
+++ b/arch/arm/mach-rpc/ecard.c
@@ -960,7 +960,9 @@ static int __init ecard_probe(int slot, unsigned irq, card_type_t type)
*ecp = ec;
slot_to_expcard[slot] = ec;
- device_register(&ec->dev);
+ rc = device_register(&ec->dev);
+ if (rc)
+ goto nodev;
return 0;
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2416.c b/arch/arm/mach-s3c24xx/irq-s3c2416.c
index 23ec97370f32..ff141b0af26b 100644
--- a/arch/arm/mach-s3c24xx/irq-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/irq-s3c2416.c
@@ -232,7 +232,7 @@ struct irq_chip s3c2416_irq_second = {
/* IRQ initialisation code */
-static int __init s3c2416_add_sub(unsigned int base,
+static int s3c2416_add_sub(unsigned int base,
void (*demux)(unsigned int,
struct irq_desc *),
struct irq_chip *chip,
@@ -251,7 +251,7 @@ static int __init s3c2416_add_sub(unsigned int base,
return 0;
}
-static void __init s3c2416_irq_add_second(void)
+static void s3c2416_irq_add_second(void)
{
unsigned long pend;
unsigned long last;
@@ -287,7 +287,7 @@ static void __init s3c2416_irq_add_second(void)
}
}
-static int __init s3c2416_irq_add(struct device *dev,
+static int s3c2416_irq_add(struct device *dev,
struct subsys_interface *sif)
{
printk(KERN_INFO "S3C2416: IRQ Support\n");
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2443.c b/arch/arm/mach-s3c24xx/irq-s3c2443.c
index ac2829f56d12..5e69109c0928 100644
--- a/arch/arm/mach-s3c24xx/irq-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/irq-s3c2443.c
@@ -222,7 +222,7 @@ static struct irq_chip s3c2443_irq_cam = {
/* IRQ initialisation code */
-static int __init s3c2443_add_sub(unsigned int base,
+static int s3c2443_add_sub(unsigned int base,
void (*demux)(unsigned int,
struct irq_desc *),
struct irq_chip *chip,
@@ -241,7 +241,7 @@ static int __init s3c2443_add_sub(unsigned int base,
return 0;
}
-static int __init s3c2443_irq_add(struct device *dev,
+static int s3c2443_irq_add(struct device *dev,
struct subsys_interface *sif)
{
printk("S3C2443: IRQ Support\n");
diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c
index 17f8356177c1..ddf7a3c743ac 100644
--- a/arch/arm/mach-s3c24xx/simtec-usb.c
+++ b/arch/arm/mach-s3c24xx/simtec-usb.c
@@ -104,7 +104,7 @@ static struct s3c2410_hcd_info usb_simtec_info __initdata = {
};
-int usb_simtec_init(void)
+int __init usb_simtec_init(void)
{
int ret;
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index e1ccda6128eb..6a7ad3c2a3fc 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -388,7 +388,7 @@ static void __init map_sa1100_gpio_regs( void )
*/
static void __init get_assabet_scr(void)
{
- unsigned long scr, i;
+ unsigned long uninitialized_var(scr), i;
GPDR |= 0x3fc; /* Configure GPIO 9:2 as outputs */
GPSR = 0x3fc; /* Write 0xFF to GPIO 9:2 */
diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c
index b8b4ab323a3e..6d91a914c1dd 100644
--- a/arch/arm/mach-shark/pci.c
+++ b/arch/arm/mach-shark/pci.c
@@ -41,7 +41,7 @@ static struct hw_pci shark_pci __initdata = {
static int __init shark_pci_init(void)
{
if (!machine_is_shark())
- return;
+ return -ENODEV;
pcibios_min_io = 0x6000;
pcibios_min_mem = 0x50000000;
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index ed77ab8c9143..d47e215aca87 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -100,7 +100,7 @@ static inline int shmobile_cpu_is_dead(unsigned int cpu) { return 1; }
extern void shmobile_smp_init_cpus(unsigned int ncores);
-static inline void shmobile_init_late(void)
+static inline void __init shmobile_init_late(void)
{
shmobile_suspend_init();
shmobile_cpuidle_init();
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 5f3c03b61f8e..11680c532b38 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -16,7 +16,7 @@ config ARCH_TEGRA_2x_SOC
select ARM_ERRATA_742230
select ARM_ERRATA_751472
select ARM_ERRATA_754327
- select ARM_ERRATA_764369
+ select ARM_ERRATA_764369 if SMP
select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
select CPU_FREQ_TABLE if CPU_FREQ
@@ -37,7 +37,7 @@ config ARCH_TEGRA_3x_SOC
select ARM_ERRATA_743622
select ARM_ERRATA_751472
select ARM_ERRATA_754322
- select ARM_ERRATA_764369
+ select ARM_ERRATA_764369 if SMP
select PL310_ERRATA_769419 if CACHE_L2X0
select CPU_FREQ_TABLE if CPU_FREQ
help
@@ -57,8 +57,6 @@ config TEGRA_AHB
which controls AHB bus master arbitration and some
perfomance parameters(priority, prefech size).
-comment "Tegra board type"
-
choice
prompt "Default low-level debug console UART"
default TEGRA_DEBUG_UART_NONE
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index c77c86c47369..5848206ee9b9 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -5,9 +5,9 @@ config UX500_SOC_COMMON
default y
select ARM_GIC
select HAS_MTU
- select PL310_ERRATA_753970
+ select PL310_ERRATA_753970 if CACHE_PL310
select ARM_ERRATA_754322
- select ARM_ERRATA_764369
+ select ARM_ERRATA_764369 if SMP
select CACHE_L2X0
select PINCTRL
select PINCTRL_NOMADIK
diff --git a/arch/arm/mach-vt8500/include/mach/uncompress.h b/arch/arm/mach-vt8500/include/mach/uncompress.h
index bb9e2d23fee3..e6e81fdaf109 100644
--- a/arch/arm/mach-vt8500/include/mach/uncompress.h
+++ b/arch/arm/mach-vt8500/include/mach/uncompress.h
@@ -15,15 +15,15 @@
*
*/
-#define UART0_PHYS 0xd8200000
-#include <asm/io.h>
+#define UART0_PHYS 0xd8200000
+#define UART0_ADDR(x) *(volatile unsigned char *)(UART0_PHYS + x)
static void putc(const char c)
{
- while (readb(UART0_PHYS + 0x1c) & 0x2)
+ while (UART0_ADDR(0x1c) & 0x2)
/* Tx busy, wait and poll */;
- writeb(c, UART0_PHYS);
+ UART0_ADDR(0) = c;
}
static void flush(void)
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 587ea950d08b..8d3871f110a5 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -77,8 +77,11 @@ static void vt8500_power_off(void)
void __init vt8500_init(void)
{
- struct device_node *np, *fb;
+ struct device_node *np;
+#if defined(CONFIG_FB_VT8500) || defined(CONFIG_FB_WM8505)
+ struct device_node *fb;
void __iomem *gpio_base;
+#endif
#ifdef CONFIG_FB_VT8500
fb = of_find_compatible_node(NULL, NULL, "via,vt8500-fb");
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ca83a7659aef..c9d1c3603bbf 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -43,11 +43,13 @@ config OMAP_DEBUG_DEVICES
config OMAP_DEBUG_LEDS
def_bool y if NEW_LEDS
+ select LEDS_CLASS
depends on OMAP_DEBUG_DEVICES
config POWER_AVS_OMAP
bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM
+ select POWER_SUPPLY
help
Say Y to enable AVS(Adaptive Voltage Scaling)
support on OMAP containing the version 1 or
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 2e826f1faf7b..87ba8dd0d791 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -52,22 +52,29 @@ static u32 notrace omap_32k_read_sched_clock(void)
* nsecs and adds to a monotonically increasing timespec.
*/
static struct timespec persistent_ts;
-static cycles_t cycles, last_cycles;
+static cycles_t cycles;
static unsigned int persistent_mult, persistent_shift;
+static DEFINE_SPINLOCK(read_persistent_clock_lock);
+
static void omap_read_persistent_clock(struct timespec *ts)
{
unsigned long long nsecs;
- cycles_t delta;
- struct timespec *tsp = &persistent_ts;
+ cycles_t last_cycles;
+ unsigned long flags;
+
+ spin_lock_irqsave(&read_persistent_clock_lock, flags);
last_cycles = cycles;
cycles = sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0;
- delta = cycles - last_cycles;
- nsecs = clocksource_cyc2ns(delta, persistent_mult, persistent_shift);
+ nsecs = clocksource_cyc2ns(cycles - last_cycles,
+ persistent_mult, persistent_shift);
+
+ timespec_add_ns(&persistent_ts, nsecs);
+
+ *ts = persistent_ts;
- timespec_add_ns(tsp, nsecs);
- *ts = *tsp;
+ spin_unlock_irqrestore(&read_persistent_clock_lock, flags);
}
/**
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index 9f6413324df9..9722f418ae1f 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -38,7 +38,7 @@ int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
if (!dev || t < -1) {
WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
return -EINVAL;
- };
+ }
if (t == -1)
pr_debug("OMAP PM: remove max MPU wakeup latency constraint: dev %s\n",
@@ -67,7 +67,7 @@ int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
agent_id != OCP_TARGET_AGENT)) {
WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
return -EINVAL;
- };
+ }
if (r == 0)
pr_debug("OMAP PM: remove min bus tput constraint: dev %s for agent_id %d\n",
@@ -93,7 +93,7 @@ int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
if (!req_dev || !dev || t < -1) {
WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
return -EINVAL;
- };
+ }
if (t == -1)
pr_debug("OMAP PM: remove max device latency constraint: dev %s\n",
@@ -123,7 +123,7 @@ int omap_pm_set_max_sdma_lat(struct device *dev, long t)
if (!dev || t < -1) {
WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
return -EINVAL;
- };
+ }
if (t == -1)
pr_debug("OMAP PM: remove max DMA latency constraint: dev %s\n",
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index cee85a55bd82..7a7d1f2a65e9 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -725,7 +725,7 @@ struct platform_device __init *omap_device_build_ss(const char *pdev_name, int p
dev_set_name(&pdev->dev, "%s", pdev->name);
od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt);
- if (!od)
+ if (IS_ERR(od))
goto odbs_exit1;
ret = platform_device_add_data(pdev, pdata, pdata_len);