x86_64: move boot

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

6 files changed, 0 insertions, 771 deletions

diff --git a/arch/x86_64/boot/compressed/Makefile b/arch/x86_64/boot/compressed/Makefile
deleted file mode 100644
index 76ab5caddf9a..000000000000
--- a/arch/x86_64/boot/compressed/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-ifeq ($(CONFIG_X86_32),y)
-include ${srctree}/arch/x86/boot/compressed/Makefile_32
-else
-include ${srctree}/arch/x86_64/boot/compressed/Makefile_64
-endif
diff --git a/arch/x86_64/boot/compressed/Makefile_64 b/arch/x86_64/boot/compressed/Makefile_64
deleted file mode 100644
index 5bfd108f29d3..000000000000
--- a/arch/x86_64/boot/compressed/Makefile_64
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# linux/arch/x86_64/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-targets		:= vmlinux vmlinux.bin vmlinux.bin.gz head_64.o misc_64.o piggy.o
-
-CFLAGS := -m64 -D__KERNEL__ $(LINUXINCLUDE) -O2  \
-	  -fno-strict-aliasing -fPIC -mcmodel=small \
-	   $(call cc-option, -ffreestanding) \
-	   $(call cc-option, -fno-stack-protector)
-AFLAGS  := $(CFLAGS) -D__ASSEMBLY__
-LDFLAGS := -m elf_x86_64
-
-LDFLAGS_vmlinux := -T
-$(obj)/vmlinux: $(src)/vmlinux_64.lds $(obj)/head_64.o $(obj)/misc_64.o $(obj)/piggy.o FORCE
-	$(call if_changed,ld)
-	@:
-
-$(obj)/vmlinux.bin: vmlinux FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,gzip)
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
-
-$(obj)/piggy.o: $(obj)/vmlinux_64.scr $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,ld)
diff --git a/arch/x86_64/boot/compressed/head_64.S b/arch/x86_64/boot/compressed/head_64.S
deleted file mode 100644
index 49467640751f..000000000000
--- a/arch/x86_64/boot/compressed/head_64.S
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- *  linux/boot/head.S
- *
- *  Copyright (C) 1991, 1992, 1993  Linus Torvalds
- */
-
-/*
- *  head.S contains the 32-bit startup code.
- *
- * NOTE!!! Startup happens at absolute address 0x00001000, which is also where
- * the page directory will exist. The startup code will be overwritten by
- * the page directory. [According to comments etc elsewhere on a compressed
- * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
- *
- * Page 0 is deliberately kept safe, since System Management Mode code in 
- * laptops may need to access the BIOS data stored there.  This is also
- * useful for future device drivers that either access the BIOS via VM86 
- * mode.
- */
-
-/*
- * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
- */
-.code32
-.text
-
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/msr.h>
-
-.section ".text.head"
-	.code32
-	.globl startup_32
-
-startup_32:
-	cld
-	cli
-	movl	$(__KERNEL_DS), %eax
-	movl	%eax, %ds
-	movl	%eax, %es
-	movl	%eax, %ss
-
-/* Calculate the delta between where we were compiled to run
- * at and where we were actually loaded at.  This can only be done
- * with a short local call on x86.  Nothing  else will tell us what
- * address we are running at.  The reserved chunk of the real-mode
- * data at 0x1e4 (defined as a scratch field) are used as the stack
- * for this calculation. Only 4 bytes are needed.
- */
-	leal	(0x1e4+4)(%esi), %esp
-	call	1f
-1:	popl	%ebp
-	subl	$1b, %ebp
-
-/* setup a stack and make sure cpu supports long mode. */
-	movl	$user_stack_end, %eax
-	addl	%ebp, %eax
-	movl	%eax, %esp
-
-	call	verify_cpu
-	testl	%eax, %eax
-	jnz	no_longmode
-
-/* Compute the delta between where we were compiled to run at
- * and where the code will actually run at.
- */
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
- * contains the address where we should move the kernel image temporarily
- * for safe in-place decompression.
- */
-
-#ifdef CONFIG_RELOCATABLE
-	movl	%ebp, %ebx
-	addl	$(LARGE_PAGE_SIZE -1), %ebx
-	andl	$LARGE_PAGE_MASK, %ebx
-#else
-	movl	$CONFIG_PHYSICAL_START, %ebx
-#endif
-
-	/* Replace the compressed data size with the uncompressed size */
-	subl	input_len(%ebp), %ebx
-	movl	output_len(%ebp), %eax
-	addl	%eax, %ebx
-	/* Add 8 bytes for every 32K input block */
-	shrl	$12, %eax
-	addl	%eax, %ebx
-	/* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
-	addl	$(32768 + 18 + 4095), %ebx
-	andl	$~4095, %ebx
-
-/*
- * Prepare for entering 64 bit mode
- */
-
-	/* Load new GDT with the 64bit segments using 32bit descriptor */
-	leal	gdt(%ebp), %eax
-	movl	%eax, gdt+2(%ebp)
-	lgdt	gdt(%ebp)
-
-	/* Enable PAE mode */
-	xorl	%eax, %eax
-	orl	$(1 << 5), %eax
-	movl	%eax, %cr4
-
- /*
-  * Build early 4G boot pagetable
-  */
-	/* Initialize Page tables to 0*/
-	leal	pgtable(%ebx), %edi
-	xorl	%eax, %eax
-	movl	$((4096*6)/4), %ecx
-	rep	stosl
-
-	/* Build Level 4 */
-	leal	pgtable + 0(%ebx), %edi
-	leal	0x1007 (%edi), %eax
-	movl	%eax, 0(%edi)
-
-	/* Build Level 3 */
-	leal	pgtable + 0x1000(%ebx), %edi
-	leal	0x1007(%edi), %eax
-	movl	$4, %ecx
-1:	movl	%eax, 0x00(%edi)
-	addl	$0x00001000, %eax
-	addl	$8, %edi
-	decl	%ecx
-	jnz	1b
-
-	/* Build Level 2 */
-	leal	pgtable + 0x2000(%ebx), %edi
-	movl	$0x00000183, %eax
-	movl	$2048, %ecx
-1:	movl	%eax, 0(%edi)
-	addl	$0x00200000, %eax
-	addl	$8, %edi
-	decl	%ecx
-	jnz	1b
-
-	/* Enable the boot page tables */
-	leal	pgtable(%ebx), %eax
-	movl	%eax, %cr3
-
-	/* Enable Long mode in EFER (Extended Feature Enable Register) */
-	movl	$MSR_EFER, %ecx
-	rdmsr
-	btsl	$_EFER_LME, %eax
-	wrmsr
-
-	/* Setup for the jump to 64bit mode
-	 *
-	 * When the jump is performend we will be in long mode but
-	 * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
-	 * (and in turn EFER.LMA = 1).	To jump into 64bit mode we use
-	 * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
-	 * We place all of the values on our mini stack so lret can
-	 * used to perform that far jump.
-	 */
-	pushl	$__KERNEL_CS
-	leal	startup_64(%ebp), %eax
-	pushl	%eax
-
-	/* Enter paged protected Mode, activating Long Mode */
-	movl	$0x80000001, %eax /* Enable Paging and Protected mode */
-	movl	%eax, %cr0
-
-	/* Jump from 32bit compatibility mode into 64bit mode. */
-	lret
-
-no_longmode:
-	/* This isn't an x86-64 CPU so hang */
-1:
-	hlt
-	jmp     1b
-
-#include "../../kernel/verify_cpu_64.S"
-
-	/* Be careful here startup_64 needs to be at a predictable
-	 * address so I can export it in an ELF header.  Bootloaders
-	 * should look at the ELF header to find this address, as
-	 * it may change in the future.
-	 */
-	.code64
-	.org 0x200
-ENTRY(startup_64)
-	/* We come here either from startup_32 or directly from a
-	 * 64bit bootloader.  If we come here from a bootloader we depend on
-	 * an identity mapped page table being provied that maps our
-	 * entire text+data+bss and hopefully all of memory.
-	 */
-
-	/* Setup data segments. */
-	xorl	%eax, %eax
-	movl	%eax, %ds
-	movl	%eax, %es
-	movl	%eax, %ss
-	movl	%eax, %fs
-	movl	%eax, %gs
-	lldt	%ax
-	movl    $0x20, %eax
-	ltr	%ax
-
-	/* Compute the decompressed kernel start address.  It is where
-	 * we were loaded at aligned to a 2M boundary. %rbp contains the
-	 * decompressed kernel start address.
-	 *
-	 * If it is a relocatable kernel then decompress and run the kernel
-	 * from load address aligned to 2MB addr, otherwise decompress and
-	 * run the kernel from CONFIG_PHYSICAL_START
-	 */
-
-	/* Start with the delta to where the kernel will run at. */
-#ifdef CONFIG_RELOCATABLE
-	leaq	startup_32(%rip) /* - $startup_32 */, %rbp
-	addq	$(LARGE_PAGE_SIZE - 1), %rbp
-	andq	$LARGE_PAGE_MASK, %rbp
-	movq	%rbp, %rbx
-#else
-	movq	$CONFIG_PHYSICAL_START, %rbp
-	movq	%rbp, %rbx
-#endif
-
-	/* Replace the compressed data size with the uncompressed size */
-	movl	input_len(%rip), %eax
-	subq	%rax, %rbx
-	movl	output_len(%rip), %eax
-	addq	%rax, %rbx
-	/* Add 8 bytes for every 32K input block */
-	shrq	$12, %rax
-	addq	%rax, %rbx
-	/* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
-	addq	$(32768 + 18 + 4095), %rbx
-	andq	$~4095, %rbx
-
-/* Copy the compressed kernel to the end of our buffer
- * where decompression in place becomes safe.
- */
-	leaq	_end(%rip), %r8
-	leaq	_end(%rbx), %r9
-	movq	$_end /* - $startup_32 */, %rcx
-1:	subq	$8, %r8
-	subq	$8, %r9
-	movq	0(%r8), %rax
-	movq	%rax, 0(%r9)
-	subq	$8, %rcx
-	jnz	1b
-
-/*
- * Jump to the relocated address.
- */
-	leaq	relocated(%rbx), %rax
-	jmp	*%rax
-
-.section ".text"
-relocated:
-
-/*
- * Clear BSS
- */
-	xorq	%rax, %rax
-	leaq    _edata(%rbx), %rdi
-	leaq    _end(%rbx), %rcx
-	subq	%rdi, %rcx
-	cld
-	rep
-	stosb
-
-	/* Setup the stack */
-	leaq	user_stack_end(%rip), %rsp
-
-	/* zero EFLAGS after setting rsp */
-	pushq	$0
-	popfq
-
-/*
- * Do the decompression, and jump to the new kernel..
- */
-	pushq	%rsi			# Save the real mode argument
-	movq	%rsi, %rdi		# real mode address
-	leaq	_heap(%rip), %rsi	# _heap
-	leaq	input_data(%rip), %rdx  # input_data
-	movl	input_len(%rip), %eax
-	movq	%rax, %rcx		# input_len
-	movq	%rbp, %r8		# output
-	call	decompress_kernel
-	popq	%rsi
-
-
-/*
- * Jump to the decompressed kernel.
- */
-	jmp	*%rbp
-
-	.data
-gdt:
-	.word	gdt_end - gdt
-	.long	gdt
-	.word	0
-	.quad	0x0000000000000000	/* NULL descriptor */
-	.quad	0x00af9a000000ffff	/* __KERNEL_CS */
-	.quad	0x00cf92000000ffff	/* __KERNEL_DS */
-	.quad	0x0080890000000000	/* TS descriptor */
-	.quad   0x0000000000000000	/* TS continued */
-gdt_end:
-	.bss
-/* Stack for uncompression */
-	.balign 4
-user_stack:
-	.fill 4096,4,0
-user_stack_end:
diff --git a/arch/x86_64/boot/compressed/misc_64.c b/arch/x86_64/boot/compressed/misc_64.c
deleted file mode 100644
index f932b0e89096..000000000000
--- a/arch/x86_64/boot/compressed/misc_64.c
+++ /dev/null
@@ -1,371 +0,0 @@
-/*
- * misc.c
- * 
- * This is a collection of several routines from gzip-1.0.3 
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
- */
-
-#define _LINUX_STRING_H_ 1
-#define __LINUX_BITMAP_H 1
-
-#include <linux/linkage.h>
-#include <linux/screen_info.h>
-#include <asm/io.h>
-#include <asm/page.h>
-
-/* WARNING!!
- * This code is compiled with -fPIC and it is relocated dynamically
- * at run time, but no relocation processing is performed.
- * This means that it is not safe to place pointers in static structures.
- */
-
-/*
- * Getting to provable safe in place decompression is hard.
- * Worst case behaviours need to be analized.
- * Background information:
- *
- * The file layout is:
- *    magic[2]
- *    method[1]
- *    flags[1]
- *    timestamp[4]
- *    extraflags[1]
- *    os[1]
- *    compressed data blocks[N]
- *    crc[4] orig_len[4]
- *
- * resulting in 18 bytes of non compressed data overhead.
- *
- * Files divided into blocks
- * 1 bit (last block flag)
- * 2 bits (block type)
- *
- * 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved.
- * The smallest block type encoding is always used.
- *
- * stored:
- *    32 bits length in bytes.
- *
- * fixed:
- *    magic fixed tree.
- *    symbols.
- *
- * dynamic:
- *    dynamic tree encoding.
- *    symbols.
- *
- *
- * The buffer for decompression in place is the length of the
- * uncompressed data, plus a small amount extra to keep the algorithm safe.
- * The compressed data is placed at the end of the buffer.  The output
- * pointer is placed at the start of the buffer and the input pointer
- * is placed where the compressed data starts.  Problems will occur
- * when the output pointer overruns the input pointer.
- *
- * The output pointer can only overrun the input pointer if the input
- * pointer is moving faster than the output pointer.  A condition only
- * triggered by data whose compressed form is larger than the uncompressed
- * form.
- *
- * The worst case at the block level is a growth of the compressed data
- * of 5 bytes per 32767 bytes.
- *
- * The worst case internal to a compressed block is very hard to figure.
- * The worst case can at least be boundined by having one bit that represents
- * 32764 bytes and then all of the rest of the bytes representing the very
- * very last byte.
- *
- * All of which is enough to compute an amount of extra data that is required
- * to be safe.  To avoid problems at the block level allocating 5 extra bytes
- * per 32767 bytes of data is sufficient.  To avoind problems internal to a block
- * adding an extra 32767 bytes (the worst case uncompressed block size) is
- * sufficient, to ensure that in the worst case the decompressed data for
- * block will stop the byte before the compressed data for a block begins.
- * To avoid problems with the compressed data's meta information an extra 18
- * bytes are needed.  Leading to the formula:
- *
- * extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size.
- *
- * Adding 8 bytes per 32K is a bit excessive but much easier to calculate.
- * Adding 32768 instead of 32767 just makes for round numbers.
- * Adding the decompressor_size is necessary as it musht live after all
- * of the data as well.  Last I measured the decompressor is about 14K.
- * 10K of actuall data and 4K of bss.
- *
- */
-
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-#define STATIC static
-
-#undef memset
-#undef memcpy
-#define memzero(s, n)     memset ((s), 0, (n))
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x80000000	/* Window size must be at least 32k,
-				 * and a power of two
-				 * We don't actually have a window just
-				 * a huge output buffer so I report
-				 * a 2G windows size, as that should
-				 * always be larger than our output buffer.
-				 */
-
-static uch *inbuf;	/* input buffer */
-static uch *window;	/* Sliding window buffer, (and final output buffer) */
-
-static unsigned insize;  /* valid bytes in inbuf */
-static unsigned inptr;   /* index of next byte to be processed in inbuf */
-static unsigned outcnt;  /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-		
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-static int  fill_inbuf(void);
-static void flush_window(void);
-static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
-  
-/*
- * This is set up by the setup-routine at boot-time
- */
-static unsigned char *real_mode; /* Pointer to real-mode data */
-
-#define RM_EXT_MEM_K   (*(unsigned short *)(real_mode + 0x2))
-#ifndef STANDARD_MEMORY_BIOS_CALL
-#define RM_ALT_MEM_K   (*(unsigned long *)(real_mode + 0x1e0))
-#endif
-#define RM_SCREEN_INFO (*(struct screen_info *)(real_mode+0))
-
-extern unsigned char input_data[];
-extern int input_len;
-
-static long bytes_out = 0;
-
-static void *malloc(int size);
-static void free(void *where);
-
-static void *memset(void *s, int c, unsigned n);
-static void *memcpy(void *dest, const void *src, unsigned n);
-
-static void putstr(const char *);
-
-static long free_mem_ptr;
-static long free_mem_end_ptr;
-
-#define HEAP_SIZE             0x7000
-
-static char *vidmem = (char *)0xb8000;
-static int vidport;
-static int lines, cols;
-
-#include "../../../../lib/inflate.c"
-
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr <= 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
- 
-static void scroll(void)
-{
-	int i;
-
-	memcpy ( vidmem, vidmem + cols * 2, ( lines - 1 ) * cols * 2 );
-	for ( i = ( lines - 1 ) * cols * 2; i < lines * cols * 2; i += 2 )
-		vidmem[i] = ' ';
-}
-
-static void putstr(const char *s)
-{
-	int x,y,pos;
-	char c;
-
-	x = RM_SCREEN_INFO.orig_x;
-	y = RM_SCREEN_INFO.orig_y;
-
-	while ( ( c = *s++ ) != '\0' ) {
-		if ( c == '\n' ) {
-			x = 0;
-			if ( ++y >= lines ) {
-				scroll();
-				y--;
-			}
-		} else {
-			vidmem [ ( x + cols * y ) * 2 ] = c; 
-			if ( ++x >= cols ) {
-				x = 0;
-				if ( ++y >= lines ) {
-					scroll();
-					y--;
-				}
-			}
-		}
-	}
-
-	RM_SCREEN_INFO.orig_x = x;
-	RM_SCREEN_INFO.orig_y = y;
-
-	pos = (x + cols * y) * 2;	/* Update cursor position */
-	outb_p(14, vidport);
-	outb_p(0xff & (pos >> 9), vidport+1);
-	outb_p(15, vidport);
-	outb_p(0xff & (pos >> 1), vidport+1);
-}
-
-static void* memset(void* s, int c, unsigned n)
-{
-	int i;
-	char *ss = (char*)s;
-
-	for (i=0;i<n;i++) ss[i] = c;
-	return s;
-}
-
-static void* memcpy(void* dest, const void* src, unsigned n)
-{
-	int i;
-	char *d = (char *)dest, *s = (char *)src;
-
-	for (i=0;i<n;i++) d[i] = s[i];
-	return dest;
-}
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
-	error("ran out of input data");
-	return 0;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
-	/* With my window equal to my output buffer
-	 * I only need to compute the crc here.
-	 */
-	ulg c = crc;         /* temporary variable */
-	unsigned n;
-	uch *in, ch;
-
-	in = window;
-	for (n = 0; n < outcnt; n++) {
-		ch = *in++;
-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg)outcnt;
-	outcnt = 0;
-}
-
-static void error(char *x)
-{
-	putstr("\n\n");
-	putstr(x);
-	putstr("\n\n -- System halted");
-
-	while(1);	/* Halt */
-}
-
-asmlinkage void decompress_kernel(void *rmode, unsigned long heap,
-	uch *input_data, unsigned long input_len, uch *output)
-{
-	real_mode = rmode;
-
-	if (RM_SCREEN_INFO.orig_video_mode == 7) {
-		vidmem = (char *) 0xb0000;
-		vidport = 0x3b4;
-	} else {
-		vidmem = (char *) 0xb8000;
-		vidport = 0x3d4;
-	}
-
-	lines = RM_SCREEN_INFO.orig_video_lines;
-	cols = RM_SCREEN_INFO.orig_video_cols;
-
-	window = output;  		/* Output buffer (Normally at 1M) */
-	free_mem_ptr     = heap;	/* Heap  */
-	free_mem_end_ptr = heap + HEAP_SIZE;
-	inbuf  = input_data;		/* Input buffer */
-	insize = input_len;
-	inptr  = 0;
-
-	if ((ulg)output & (__KERNEL_ALIGN - 1))
-		error("Destination address not 2M aligned");
-	if ((ulg)output >= 0xffffffffffUL)
-		error("Destination address too large");
-
-	makecrc();
-	putstr(".\nDecompressing Linux...");
-	gunzip();
-	putstr("done.\nBooting the kernel.\n");
-	return;
-}
diff --git a/arch/x86_64/boot/compressed/vmlinux_64.lds b/arch/x86_64/boot/compressed/vmlinux_64.lds
deleted file mode 100644
index 94c13e557fb4..000000000000
--- a/arch/x86_64/boot/compressed/vmlinux_64.lds
+++ /dev/null
@@ -1,44 +0,0 @@
-OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
-OUTPUT_ARCH(i386:x86-64)
-ENTRY(startup_64)
-SECTIONS
-{
-	/* Be careful parts of head.S assume startup_32 is at
- 	 * address 0.
-	 */
-	. = 0;
-	.text :	{
-		_head = . ;
-		*(.text.head)
-		_ehead = . ;
-		*(.text.compressed)
-		_text = .; 	/* Text */
-		*(.text)
-		*(.text.*)
-		_etext = . ;
-	}
-	.rodata : {
-		_rodata = . ;
-		*(.rodata)	 /* read-only data */
-		*(.rodata.*)
-		_erodata = . ;
-	}
-	.data :	{
-		_data = . ;
-		*(.data)
-		*(.data.*)
-		_edata = . ;
-	}
-	.bss : {
-		_bss = . ;
-		*(.bss)
-		*(.bss.*)
-		*(COMMON)
-		. = ALIGN(8);
-		_end = . ;
-		. = ALIGN(4096);
-		pgtable = . ;
-		. = . + 4096 * 6;
-		_heap = .;
-	}
-}
diff --git a/arch/x86_64/boot/compressed/vmlinux_64.scr b/arch/x86_64/boot/compressed/vmlinux_64.scr
deleted file mode 100644
index bd1429ce193e..000000000000
--- a/arch/x86_64/boot/compressed/vmlinux_64.scr
+++ /dev/null
@@ -1,10 +0,0 @@
-SECTIONS
-{
-  .text.compressed : {
-	input_len = .;
-	LONG(input_data_end - input_data) input_data = .;
-	*(.data)
-	output_len = . - 4;
-	input_data_end = .;
-	}
-}