Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 2007 insertions, 0 deletions

diff --git a/arch/x86_64/boot/video.S b/arch/x86_64/boot/video.S
new file mode 100644
index 000000000000..0587477c99f2
--- /dev/null
+++ b/arch/x86_64/boot/video.S
@@ -0,0 +1,2007 @@
+/*	video.S
+ *
+ *	Display adapter & video mode setup, version 2.13 (14-May-99)
+ *
+ *	Copyright (C) 1995 -- 1998 Martin Mares <mj@ucw.cz>
+ *	Based on the original setup.S code (C) Linus Torvalds and Mats Anderson
+ *
+ *	Rewritten to use GNU 'as' by Chris Noe <stiker@northlink.com> May 1999
+ *
+ *	For further information, look at Documentation/svga.txt.
+ *
+ */
+
+#include <linux/config.h> /* for CONFIG_VIDEO_* */
+
+/* Enable autodetection of SVGA adapters and modes. */
+#undef CONFIG_VIDEO_SVGA
+
+/* Enable autodetection of VESA modes */
+#define CONFIG_VIDEO_VESA
+
+/* Enable compacting of mode table */
+#define CONFIG_VIDEO_COMPACT
+
+/* Retain screen contents when switching modes */
+#define CONFIG_VIDEO_RETAIN
+
+/* Enable local mode list */
+#undef CONFIG_VIDEO_LOCAL
+
+/* Force 400 scan lines for standard modes (hack to fix bad BIOS behaviour */
+#undef CONFIG_VIDEO_400_HACK
+
+/* Hack that lets you force specific BIOS mode ID and specific dimensions */
+#undef CONFIG_VIDEO_GFX_HACK
+#define VIDEO_GFX_BIOS_AX 0x4f02	/* 800x600 on ThinkPad */
+#define VIDEO_GFX_BIOS_BX 0x0102
+#define VIDEO_GFX_DUMMY_RESOLUTION 0x6425	/* 100x37 */
+
+/* This code uses an extended set of video mode numbers. These include:
+ * Aliases for standard modes
+ *	NORMAL_VGA (-1)
+ *	EXTENDED_VGA (-2)
+ *	ASK_VGA (-3)
+ * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
+ * of compatibility when extending the table. These are between 0x00 and 0xff.
+ */
+#define VIDEO_FIRST_MENU 0x0000
+
+/* Standard BIOS video modes (BIOS number + 0x0100) */
+#define VIDEO_FIRST_BIOS 0x0100
+
+/* VESA BIOS video modes (VESA number + 0x0200) */
+#define VIDEO_FIRST_VESA 0x0200
+
+/* Video7 special modes (BIOS number + 0x0900) */
+#define VIDEO_FIRST_V7 0x0900
+
+/* Special video modes */
+#define VIDEO_FIRST_SPECIAL 0x0f00
+#define VIDEO_80x25 0x0f00
+#define VIDEO_8POINT 0x0f01
+#define VIDEO_80x43 0x0f02
+#define VIDEO_80x28 0x0f03
+#define VIDEO_CURRENT_MODE 0x0f04
+#define VIDEO_80x30 0x0f05
+#define VIDEO_80x34 0x0f06
+#define VIDEO_80x60 0x0f07
+#define VIDEO_GFX_HACK 0x0f08
+#define VIDEO_LAST_SPECIAL 0x0f09
+
+/* Video modes given by resolution */
+#define VIDEO_FIRST_RESOLUTION 0x1000
+
+/* The "recalculate timings" flag */
+#define VIDEO_RECALC 0x8000
+
+/* Positions of various video parameters passed to the kernel */
+/* (see also include/linux/tty.h) */
+#define PARAM_CURSOR_POS	0x00
+#define PARAM_VIDEO_PAGE	0x04
+#define PARAM_VIDEO_MODE	0x06
+#define PARAM_VIDEO_COLS	0x07
+#define PARAM_VIDEO_EGA_BX	0x0a
+#define PARAM_VIDEO_LINES	0x0e
+#define PARAM_HAVE_VGA		0x0f
+#define PARAM_FONT_POINTS	0x10
+
+#define PARAM_LFB_WIDTH		0x12
+#define PARAM_LFB_HEIGHT	0x14
+#define PARAM_LFB_DEPTH		0x16
+#define PARAM_LFB_BASE		0x18
+#define PARAM_LFB_SIZE		0x1c
+#define PARAM_LFB_LINELENGTH	0x24
+#define PARAM_LFB_COLORS	0x26
+#define PARAM_VESAPM_SEG	0x2e
+#define PARAM_VESAPM_OFF	0x30
+#define PARAM_LFB_PAGES		0x32
+#define PARAM_VESA_ATTRIB	0x34
+
+/* Define DO_STORE according to CONFIG_VIDEO_RETAIN */
+#ifdef CONFIG_VIDEO_RETAIN
+#define DO_STORE call store_screen
+#else
+#define DO_STORE
+#endif /* CONFIG_VIDEO_RETAIN */
+
+# This is the main entry point called by setup.S
+# %ds *must* be pointing to the bootsector
+video:	pushw	%ds		# We use different segments
+	pushw	%ds		# FS contains original DS
+	popw	%fs
+	pushw	%cs		# DS is equal to CS
+	popw	%ds
+	pushw	%cs		# ES is equal to CS
+	popw	%es
+	xorw	%ax, %ax
+	movw	%ax, %gs	# GS is zero
+	cld
+	call	basic_detect	# Basic adapter type testing (EGA/VGA/MDA/CGA)
+#ifdef CONFIG_VIDEO_SELECT
+	movw	%fs:(0x01fa), %ax		# User selected video mode
+	cmpw	$ASK_VGA, %ax			# Bring up the menu
+	jz	vid2
+
+	call	mode_set			# Set the mode
+	jc	vid1
+
+	leaw	badmdt, %si			# Invalid mode ID
+	call	prtstr
+vid2:	call	mode_menu
+vid1:
+#ifdef CONFIG_VIDEO_RETAIN
+	call	restore_screen			# Restore screen contents
+#endif /* CONFIG_VIDEO_RETAIN */
+	call	store_edid
+#endif /* CONFIG_VIDEO_SELECT */
+	call	mode_params			# Store mode parameters
+	popw	%ds				# Restore original DS
+	ret
+
+# Detect if we have CGA, MDA, EGA or VGA and pass it to the kernel.
+basic_detect:
+	movb	$0, %fs:(PARAM_HAVE_VGA)
+	movb	$0x12, %ah	# Check EGA/VGA
+	movb	$0x10, %bl
+	int	$0x10
+	movw	%bx, %fs:(PARAM_VIDEO_EGA_BX)	# Identifies EGA to the kernel
+	cmpb	$0x10, %bl			# No, it's a CGA/MDA/HGA card.
+	je	basret
+
+	incb	adapter
+	movw	$0x1a00, %ax			# Check EGA or VGA?
+	int	$0x10
+	cmpb	$0x1a, %al			# 1a means VGA...
+	jne	basret				# anything else is EGA.
+	
+	incb	%fs:(PARAM_HAVE_VGA)		# We've detected a VGA
+	incb	adapter
+basret:	ret
+
+# Store the video mode parameters for later usage by the kernel.
+# This is done by asking the BIOS except for the rows/columns
+# parameters in the default 80x25 mode -- these are set directly,
+# because some very obscure BIOSes supply insane values.
+mode_params:
+#ifdef CONFIG_VIDEO_SELECT
+	cmpb	$0, graphic_mode
+	jnz	mopar_gr
+#endif
+	movb	$0x03, %ah			# Read cursor position
+	xorb	%bh, %bh
+	int	$0x10
+	movw	%dx, %fs:(PARAM_CURSOR_POS)
+	movb	$0x0f, %ah			# Read page/mode/width
+	int	$0x10
+	movw	%bx, %fs:(PARAM_VIDEO_PAGE)
+	movw	%ax, %fs:(PARAM_VIDEO_MODE)	# Video mode and screen width
+	cmpb	$0x7, %al			# MDA/HGA => segment differs
+	jnz	mopar0
+
+	movw	$0xb000, video_segment
+mopar0: movw	%gs:(0x485), %ax		# Font size
+	movw	%ax, %fs:(PARAM_FONT_POINTS)	# (valid only on EGA/VGA)
+	movw	force_size, %ax			# Forced size?
+	orw	%ax, %ax
+	jz	mopar1
+
+	movb	%ah, %fs:(PARAM_VIDEO_COLS)
+	movb	%al, %fs:(PARAM_VIDEO_LINES)
+	ret
+
+mopar1:	movb	$25, %al
+	cmpb	$0, adapter			# If we are on CGA/MDA/HGA, the
+	jz	mopar2				# screen must have 25 lines.
+
+	movb	%gs:(0x484), %al		# On EGA/VGA, use the EGA+ BIOS
+	incb	%al				# location of max lines.
+mopar2: movb	%al, %fs:(PARAM_VIDEO_LINES)
+	ret
+
+#ifdef CONFIG_VIDEO_SELECT
+# Fetching of VESA frame buffer parameters
+mopar_gr:
+	leaw	modelist+1024, %di
+	movb	$0x23, %fs:(PARAM_HAVE_VGA)
+	movw	16(%di), %ax
+	movw	%ax, %fs:(PARAM_LFB_LINELENGTH)
+	movw	18(%di), %ax
+	movw	%ax, %fs:(PARAM_LFB_WIDTH)
+	movw	20(%di), %ax
+	movw	%ax, %fs:(PARAM_LFB_HEIGHT)
+	movb	25(%di), %al
+	movb	$0, %ah
+	movw	%ax, %fs:(PARAM_LFB_DEPTH)
+	movb	29(%di), %al	
+	movb	$0, %ah
+	movw	%ax, %fs:(PARAM_LFB_PAGES)
+	movl	40(%di), %eax
+	movl	%eax, %fs:(PARAM_LFB_BASE)
+	movl	31(%di), %eax
+	movl	%eax, %fs:(PARAM_LFB_COLORS)
+	movl	35(%di), %eax
+	movl	%eax, %fs:(PARAM_LFB_COLORS+4)
+	movw	0(%di), %ax
+	movw	%ax, %fs:(PARAM_VESA_ATTRIB)
+
+# get video mem size
+	leaw	modelist+1024, %di
+	movw	$0x4f00, %ax
+	int	$0x10
+	xorl	%eax, %eax
+	movw	18(%di), %ax
+	movl	%eax, %fs:(PARAM_LFB_SIZE)
+
+# switching the DAC to 8-bit is for <= 8 bpp only
+	movw	%fs:(PARAM_LFB_DEPTH), %ax
+	cmpw	$8, %ax
+	jg	dac_done
+
+# get DAC switching capability
+	xorl	%eax, %eax
+	movb	10(%di), %al
+	testb	$1, %al
+	jz	dac_set
+
+# attempt to switch DAC to 8-bit
+	movw	$0x4f08, %ax
+	movw	$0x0800, %bx
+	int	$0x10
+	cmpw	$0x004f, %ax
+	jne     dac_set
+	movb    %bh, dac_size		# store actual DAC size
+
+dac_set:
+# set color size to DAC size
+	movb	dac_size, %al
+	movb	%al, %fs:(PARAM_LFB_COLORS+0)
+	movb	%al, %fs:(PARAM_LFB_COLORS+2)
+	movb	%al, %fs:(PARAM_LFB_COLORS+4)
+	movb	%al, %fs:(PARAM_LFB_COLORS+6)
+
+# set color offsets to 0
+	movb	$0, %fs:(PARAM_LFB_COLORS+1)
+	movb	$0, %fs:(PARAM_LFB_COLORS+3)
+	movb	$0, %fs:(PARAM_LFB_COLORS+5)
+	movb	$0, %fs:(PARAM_LFB_COLORS+7)
+
+dac_done:
+# get protected mode interface informations
+	movw	$0x4f0a, %ax
+	xorw	%bx, %bx
+	xorw	%di, %di
+	int	$0x10
+	cmp	$0x004f, %ax
+	jnz	no_pm
+
+	movw	%es, %fs:(PARAM_VESAPM_SEG)
+	movw	%di, %fs:(PARAM_VESAPM_OFF)
+no_pm:	ret
+
+# The video mode menu
+mode_menu:
+	leaw	keymsg, %si			# "Return/Space/Timeout" message
+	call	prtstr
+	call	flush
+nokey:	call	getkt
+
+	cmpb	$0x0d, %al			# ENTER ?
+	je	listm				# yes - manual mode selection
+
+	cmpb	$0x20, %al			# SPACE ?
+	je	defmd1				# no - repeat
+
+	call 	beep
+	jmp	nokey
+
+defmd1:	ret					# No mode chosen? Default 80x25
+
+listm:	call	mode_table			# List mode table
+listm0:	leaw	name_bann, %si			# Print adapter name
+	call	prtstr
+	movw	card_name, %si
+	orw	%si, %si
+	jnz	an2
+
+	movb	adapter, %al
+	leaw	old_name, %si
+	orb	%al, %al
+	jz	an1
+
+	leaw	ega_name, %si
+	decb	%al
+	jz	an1
+
+	leaw	vga_name, %si
+	jmp	an1
+
+an2:	call	prtstr
+	leaw	svga_name, %si
+an1:	call	prtstr
+	leaw	listhdr, %si			# Table header
+	call	prtstr
+	movb	$0x30, %dl			# DL holds mode number
+	leaw	modelist, %si
+lm1:	cmpw	$ASK_VGA, (%si)			# End?
+	jz	lm2
+
+	movb	%dl, %al			# Menu selection number
+	call	prtchr
+	call	prtsp2
+	lodsw
+	call	prthw				# Mode ID
+	call	prtsp2
+	movb	0x1(%si), %al
+	call	prtdec				# Rows
+	movb	$0x78, %al			# the letter 'x'
+	call	prtchr
+	lodsw
+	call	prtdec				# Columns
+	movb	$0x0d, %al			# New line
+	call	prtchr
+	movb	$0x0a, %al
+	call	prtchr
+	incb	%dl				# Next character
+	cmpb	$0x3a, %dl
+	jnz	lm1
+
+	movb	$0x61, %dl
+	jmp	lm1
+
+lm2:	leaw	prompt, %si			# Mode prompt
+	call	prtstr
+	leaw	edit_buf, %di			# Editor buffer
+lm3:	call	getkey
+	cmpb	$0x0d, %al			# Enter?
+	jz	lment
+
+	cmpb	$0x08, %al			# Backspace?
+	jz	lmbs
+
+	cmpb	$0x20, %al			# Printable?
+	jc	lm3
+
+	cmpw	$edit_buf+4, %di		# Enough space?
+	jz	lm3
+
+	stosb
+	call	prtchr
+	jmp	lm3
+
+lmbs:	cmpw	$edit_buf, %di			# Backspace
+	jz	lm3
+
+	decw	%di
+	movb	$0x08, %al
+	call	prtchr
+	call	prtspc
+	movb	$0x08, %al
+	call	prtchr
+	jmp	lm3
+	
+lment:	movb	$0, (%di)
+	leaw	crlft, %si
+	call	prtstr
+	leaw	edit_buf, %si
+	cmpb	$0, (%si)			# Empty string = default mode
+	jz	lmdef
+
+	cmpb	$0, 1(%si)			# One character = menu selection
+	jz	mnusel
+
+	cmpw	$0x6373, (%si)			# "scan" => mode scanning
+	jnz	lmhx
+
+	cmpw	$0x6e61, 2(%si)
+	jz	lmscan
+
+lmhx:	xorw	%bx, %bx			# Else => mode ID in hex
+lmhex:	lodsb
+	orb	%al, %al
+	jz	lmuse1
+
+	subb	$0x30, %al
+	jc	lmbad
+
+	cmpb	$10, %al
+	jc	lmhx1
+
+	subb	$7, %al
+	andb	$0xdf, %al
+	cmpb	$10, %al
+	jc	lmbad
+
+	cmpb	$16, %al
+	jnc	lmbad
+
+lmhx1:	shlw	$4, %bx
+	orb	%al, %bl
+	jmp	lmhex
+
+lmuse1:	movw	%bx, %ax
+	jmp	lmuse
+
+mnusel:	lodsb					# Menu selection
+	xorb	%ah, %ah
+	subb	$0x30, %al
+	jc	lmbad
+
+	cmpb	$10, %al
+	jc	lmuse
+	
+	cmpb	$0x61-0x30, %al
+	jc	lmbad
+	
+	subb	$0x61-0x30-10, %al
+	cmpb	$36, %al
+	jnc	lmbad
+
+lmuse:	call	mode_set
+	jc	lmdef
+
+lmbad:	leaw	unknt, %si
+	call	prtstr
+	jmp	lm2
+lmscan:	cmpb	$0, adapter			# Scanning only on EGA/VGA
+	jz	lmbad
+
+	movw	$0, mt_end			# Scanning of modes is
+	movb	$1, scanning			# done as new autodetection.
+	call	mode_table
+	jmp	listm0
+lmdef:	ret
+
+# Additional parts of mode_set... (relative jumps, you know)
+setv7:						# Video7 extended modes
+	DO_STORE
+	subb	$VIDEO_FIRST_V7>>8, %bh
+	movw	$0x6f05, %ax
+	int	$0x10
+	stc
+	ret
+
+_setrec:	jmp	setrec			# Ugly...
+_set_80x25:	jmp	set_80x25
+
+# Aliases for backward compatibility.
+setalias:
+	movw	$VIDEO_80x25, %ax
+	incw	%bx
+	jz	mode_set
+
+	movb	$VIDEO_8POINT-VIDEO_FIRST_SPECIAL, %al
+	incw	%bx
+	jnz	setbad				# Fall-through!
+
+# Setting of user mode (AX=mode ID) => CF=success
+mode_set:
+	movw	%ax, %fs:(0x01fa)		# Store mode for use in acpi_wakeup.S
+	movw	%ax, %bx
+	cmpb	$0xff, %ah
+	jz	setalias
+
+	testb	$VIDEO_RECALC>>8, %ah
+	jnz	_setrec
+
+	cmpb	$VIDEO_FIRST_RESOLUTION>>8, %ah
+	jnc	setres
+	
+	cmpb	$VIDEO_FIRST_SPECIAL>>8, %ah
+	jz	setspc
+	
+	cmpb	$VIDEO_FIRST_V7>>8, %ah
+	jz	setv7
+	
+	cmpb	$VIDEO_FIRST_VESA>>8, %ah
+	jnc	check_vesa
+	
+	orb	%ah, %ah
+	jz	setmenu
+	
+	decb	%ah
+	jz	setbios
+
+setbad:	clc
+	movb	$0, do_restore			# The screen needn't be restored
+	ret
+
+setvesa:
+	DO_STORE
+	subb	$VIDEO_FIRST_VESA>>8, %bh
+	movw	$0x4f02, %ax			# VESA BIOS mode set call
+	int	$0x10
+	cmpw	$0x004f, %ax			# AL=4f if implemented
+	jnz	setbad				# AH=0 if OK
+
+	stc
+	ret
+
+setbios:
+	DO_STORE
+	int	$0x10				# Standard BIOS mode set call
+	pushw	%bx
+	movb	$0x0f, %ah			# Check if really set
+	int	$0x10
+	popw	%bx
+	cmpb	%bl, %al
+	jnz	setbad
+	
+	stc
+	ret
+
+setspc:	xorb	%bh, %bh			# Set special mode
+	cmpb	$VIDEO_LAST_SPECIAL-VIDEO_FIRST_SPECIAL, %bl
+	jnc	setbad
+	
+	addw	%bx, %bx
+	jmp	*spec_inits(%bx)
+
+setmenu:
+	orb	%al, %al			# 80x25 is an exception
+	jz	_set_80x25
+	
+	pushw	%bx				# Set mode chosen from menu
+	call	mode_table			# Build the mode table
+	popw	%ax
+	shlw	$2, %ax
+	addw	%ax, %si
+	cmpw	%di, %si
+	jnc	setbad
+	
+	movw	(%si), %ax			# Fetch mode ID
+_m_s:	jmp	mode_set
+
+setres:	pushw	%bx				# Set mode chosen by resolution
+	call	mode_table
+	popw	%bx
+	xchgb	%bl, %bh
+setr1:	lodsw
+	cmpw	$ASK_VGA, %ax			# End of the list?
+	jz	setbad
+	
+	lodsw
+	cmpw	%bx, %ax
+	jnz	setr1
+	
+	movw	-4(%si), %ax			# Fetch mode ID
+	jmp	_m_s
+
+check_vesa:
+	leaw	modelist+1024, %di
+	subb	$VIDEO_FIRST_VESA>>8, %bh
+	movw	%bx, %cx			# Get mode information structure
+	movw	$0x4f01, %ax
+	int	$0x10
+	addb	$VIDEO_FIRST_VESA>>8, %bh
+	cmpw	$0x004f, %ax
+	jnz	setbad
+
+	movb	(%di), %al			# Check capabilities.
+	andb	$0x19, %al
+	cmpb	$0x09, %al
+	jz	setvesa				# This is a text mode
+
+	movb	(%di), %al			# Check capabilities.
+	andb	$0x99, %al
+	cmpb	$0x99, %al
+	jnz	_setbad				# Doh! No linear frame buffer.
+
+	subb	$VIDEO_FIRST_VESA>>8, %bh
+	orw	$0x4000, %bx			# Use linear frame buffer
+	movw	$0x4f02, %ax			# VESA BIOS mode set call
+	int	$0x10
+	cmpw	$0x004f, %ax			# AL=4f if implemented
+	jnz	_setbad				# AH=0 if OK
+
+	movb	$1, graphic_mode		# flag graphic mode
+	movb	$0, do_restore			# no screen restore
+	stc
+	ret
+
+_setbad:	jmp	setbad          	# Ugly...
+
+# Recalculate vertical display end registers -- this fixes various
+# inconsistencies of extended modes on many adapters. Called when
+# the VIDEO_RECALC flag is set in the mode ID.
+
+setrec:	subb	$VIDEO_RECALC>>8, %ah		# Set the base mode
+	call	mode_set
+	jnc	rct3
+
+	movw	%gs:(0x485), %ax		# Font size in pixels
+	movb	%gs:(0x484), %bl		# Number of rows
+	incb	%bl
+	mulb	%bl				# Number of visible
+	decw	%ax				# scan lines - 1
+	movw	$0x3d4, %dx
+	movw	%ax, %bx
+	movb	$0x12, %al			# Lower 8 bits
+	movb	%bl, %ah
+	outw	%ax, %dx
+	movb	$0x07, %al		# Bits 8 and 9 in the overflow register
+	call	inidx
+	xchgb	%al, %ah
+	andb	$0xbd, %ah
+	shrb	%bh
+	jnc	rct1
+	orb	$0x02, %ah
+rct1:	shrb	%bh
+	jnc	rct2
+	orb	$0x40, %ah
+rct2:	movb	$0x07, %al
+	outw	%ax, %dx
+	stc
+rct3:	ret
+
+# Table of routines for setting of the special modes.
+spec_inits:
+	.word	set_80x25
+	.word	set_8pixel
+	.word	set_80x43
+	.word	set_80x28
+	.word	set_current
+	.word	set_80x30
+	.word	set_80x34
+	.word	set_80x60
+	.word	set_gfx
+
+# Set the 80x25 mode. If already set, do nothing.
+set_80x25:
+	movw	$0x5019, force_size		# Override possibly broken BIOS
+use_80x25:
+#ifdef CONFIG_VIDEO_400_HACK
+	movw	$0x1202, %ax			# Force 400 scan lines
+	movb	$0x30, %bl
+	int	$0x10
+#else
+	movb	$0x0f, %ah			# Get current mode ID
+	int	$0x10
+	cmpw	$0x5007, %ax	# Mode 7 (80x25 mono) is the only one available
+	jz	st80		# on CGA/MDA/HGA and is also available on EGAM
+
+	cmpw	$0x5003, %ax	# Unknown mode, force 80x25 color
+	jnz	force3
+
+st80:	cmpb	$0, adapter	# CGA/MDA/HGA => mode 3/7 is always 80x25
+	jz	set80
+
+	movb	%gs:(0x0484), %al	# This is EGA+ -- beware of 80x50 etc.
+	orb	%al, %al		# Some buggy BIOS'es set 0 rows
+	jz	set80
+	
+	cmpb	$24, %al		# It's hopefully correct
+	jz	set80
+#endif /* CONFIG_VIDEO_400_HACK */
+force3:	DO_STORE
+	movw	$0x0003, %ax			# Forced set
+	int	$0x10
+set80:	stc
+	ret
+
+# Set the 80x50/80x43 8-pixel mode. Simple BIOS calls.
+set_8pixel:
+	DO_STORE
+	call	use_80x25			# The base is 80x25
+set_8pt:
+	movw	$0x1112, %ax			# Use 8x8 font
+	xorb	%bl, %bl
+	int	$0x10
+	movw	$0x1200, %ax			# Use alternate print screen
+	movb	$0x20, %bl
+	int	$0x10
+	movw	$0x1201, %ax			# Turn off cursor emulation
+	movb	$0x34, %bl
+	int	$0x10
+	movb	$0x01, %ah			# Define cursor scan lines 6-7
+	movw	$0x0607, %cx
+	int	$0x10
+set_current:
+	stc
+	ret
+
+# Set the 80x28 mode. This mode works on all VGA's, because it's a standard
+# 80x25 mode with 14-point fonts instead of 16-point.
+set_80x28:
+	DO_STORE
+	call	use_80x25			# The base is 80x25
+set14:	movw	$0x1111, %ax			# Use 9x14 font
+	xorb	%bl, %bl
+	int	$0x10
+	movb	$0x01, %ah			# Define cursor scan lines 11-12
+	movw	$0x0b0c, %cx
+	int	$0x10
+	stc
+	ret
+
+# Set the 80x43 mode. This mode is works on all VGA's.
+# It's a 350-scanline mode with 8-pixel font.
+set_80x43:
+	DO_STORE
+	movw	$0x1201, %ax			# Set 350 scans
+	movb	$0x30, %bl
+	int	$0x10
+	movw	$0x0003, %ax			# Reset video mode
+	int	$0x10
+	jmp	set_8pt				# Use 8-pixel font
+
+# Set the 80x30 mode (all VGA's). 480 scanlines, 16-pixel font.
+set_80x30:
+	call	use_80x25			# Start with real 80x25
+	DO_STORE
+	movw	$0x3cc, %dx			# Get CRTC port
+	inb	%dx, %al
+	movb	$0xd4, %dl
+	rorb	%al				# Mono or color?
+	jc	set48a
+
+	movb	$0xb4, %dl
+set48a:	movw	$0x0c11, %ax		# Vertical sync end (also unlocks CR0-7)
+ 	call	outidx
+	movw	$0x0b06, %ax			# Vertical total
+ 	call	outidx
+	movw	$0x3e07, %ax			# (Vertical) overflow
+ 	call	outidx
+	movw	$0xea10, %ax			# Vertical sync start
+ 	call	outidx
+	movw	$0xdf12, %ax			# Vertical display end
+	call	outidx
+	movw	$0xe715, %ax			# Vertical blank start
+ 	call	outidx
+	movw	$0x0416, %ax			# Vertical blank end
+ 	call	outidx
+	pushw	%dx
+	movb	$0xcc, %dl			# Misc output register (read)
+ 	inb	%dx, %al
+ 	movb	$0xc2, %dl			# (write)
+ 	andb	$0x0d, %al	# Preserve clock select bits and color bit
+ 	orb	$0xe2, %al			# Set correct sync polarity
+ 	outb	%al, %dx
+	popw	%dx
+	movw	$0x501e, force_size
+	stc					# That's all.
+	ret
+
+# Set the 80x34 mode (all VGA's). 480 scans, 14-pixel font.
+set_80x34:
+	call	set_80x30			# Set 480 scans
+	call	set14				# And 14-pt font
+	movw	$0xdb12, %ax			# VGA vertical display end
+	movw	$0x5022, force_size
+setvde:	call	outidx
+	stc
+	ret
+
+# Set the 80x60 mode (all VGA's). 480 scans, 8-pixel font.
+set_80x60:
+	call	set_80x30			# Set 480 scans
+	call	set_8pt				# And 8-pt font
+	movw	$0xdf12, %ax			# VGA vertical display end
+	movw	$0x503c, force_size
+	jmp	setvde
+
+# Special hack for ThinkPad graphics
+set_gfx:
+#ifdef CONFIG_VIDEO_GFX_HACK
+	movw	$VIDEO_GFX_BIOS_AX, %ax
+	movw	$VIDEO_GFX_BIOS_BX, %bx
+	int	$0x10
+	movw	$VIDEO_GFX_DUMMY_RESOLUTION, force_size
+	stc
+#endif
+	ret
+
+#ifdef CONFIG_VIDEO_RETAIN
+
+# Store screen contents to temporary buffer.
+store_screen:
+	cmpb	$0, do_restore			# Already stored?
+	jnz	stsr
+
+	testb	$CAN_USE_HEAP, loadflags	# Have we space for storing?
+	jz	stsr
+	
+	pushw	%ax
+	pushw	%bx
+	pushw	force_size			# Don't force specific size
+	movw	$0, force_size
+	call	mode_params			# Obtain params of current mode
+	popw	force_size
+	movb	%fs:(PARAM_VIDEO_LINES), %ah
+	movb	%fs:(PARAM_VIDEO_COLS), %al
+	movw	%ax, %bx			# BX=dimensions
+	mulb	%ah
+	movw	%ax, %cx			# CX=number of characters
+	addw	%ax, %ax			# Calculate image size
+	addw	$modelist+1024+4, %ax
+	cmpw	heap_end_ptr, %ax
+	jnc	sts1				# Unfortunately, out of memory
+
+	movw	%fs:(PARAM_CURSOR_POS), %ax	# Store mode params
+	leaw	modelist+1024, %di
+	stosw
+	movw	%bx, %ax
+	stosw
+	pushw	%ds				# Store the screen
+	movw	video_segment, %ds
+	xorw	%si, %si
+	rep
+	movsw
+	popw	%ds
+	incb	do_restore			# Screen will be restored later
+sts1:	popw	%bx
+	popw	%ax
+stsr:	ret
+
+# Restore screen contents from temporary buffer.
+restore_screen:
+	cmpb	$0, do_restore			# Has the screen been stored?
+	jz	res1
+
+	call	mode_params			# Get parameters of current mode
+	movb	%fs:(PARAM_VIDEO_LINES), %cl
+	movb	%fs:(PARAM_VIDEO_COLS), %ch
+	leaw	modelist+1024, %si		# Screen buffer
+	lodsw					# Set cursor position
+	movw	%ax, %dx
+	cmpb	%cl, %dh
+	jc	res2
+	
+	movb	%cl, %dh
+	decb	%dh
+res2:	cmpb	%ch, %dl
+	jc	res3
+	
+	movb	%ch, %dl
+	decb	%dl
+res3:	movb	$0x02, %ah
+	movb	$0x00, %bh
+	int	$0x10
+	lodsw					# Display size
+	movb	%ah, %dl			# DL=number of lines
+	movb	$0, %ah				# BX=phys. length of orig. line
+	movw	%ax, %bx
+	cmpb	%cl, %dl			# Too many?
+	jc	res4
+
+	pushw	%ax
+	movb	%dl, %al
+	subb	%cl, %al
+	mulb	%bl
+	addw	%ax, %si
+	addw	%ax, %si
+	popw	%ax
+	movb	%cl, %dl
+res4:	cmpb	%ch, %al			# Too wide?
+	jc	res5
+	
+	movb	%ch, %al			# AX=width of src. line
+res5:	movb	$0, %cl
+	xchgb	%ch, %cl
+	movw	%cx, %bp			# BP=width of dest. line
+	pushw	%es
+	movw	video_segment, %es
+	xorw	%di, %di			# Move the data
+	addw	%bx, %bx			# Convert BX and BP to _bytes_
+	addw	%bp, %bp
+res6:	pushw	%si
+	pushw	%di
+	movw	%ax, %cx
+	rep
+	movsw
+	popw	%di
+	popw	%si
+	addw	%bp, %di
+	addw	%bx, %si
+	decb	%dl
+	jnz	res6
+	
+	popw	%es				# Done
+res1:	ret
+#endif /* CONFIG_VIDEO_RETAIN */
+
+# Write to indexed VGA register (AL=index, AH=data, DX=index reg. port)
+outidx:	outb	%al, %dx
+	pushw	%ax
+	movb	%ah, %al
+	incw	%dx
+	outb	%al, %dx
+	decw	%dx
+	popw	%ax
+	ret
+
+# Build the table of video modes (stored after the setup.S code at the
+# `modelist' label. Each video mode record looks like:
+#	.word	MODE-ID		(our special mode ID (see above))
+#	.byte	rows		(number of rows)
+#	.byte	columns		(number of columns)
+# Returns address of the end of the table in DI, the end is marked
+# with a ASK_VGA ID.
+mode_table:
+	movw	mt_end, %di			# Already filled?
+	orw	%di, %di
+	jnz	mtab1x
+	
+	leaw	modelist, %di			# Store standard modes:
+	movl	$VIDEO_80x25 + 0x50190000, %eax	# The 80x25 mode (ALL)
+	stosl
+	movb	adapter, %al			# CGA/MDA/HGA -- no more modes
+	orb	%al, %al
+	jz	mtabe
+	
+	decb	%al
+	jnz	mtabv
+	
+	movl	$VIDEO_8POINT + 0x502b0000, %eax	# The 80x43 EGA mode
+	stosl
+	jmp	mtabe
+
+mtab1x:	jmp	mtab1
+
+mtabv:	leaw	vga_modes, %si			# All modes for std VGA
+	movw	$vga_modes_end-vga_modes, %cx
+	rep	# I'm unable to use movsw as I don't know how to store a half
+	movsb	# of the expression above to cx without using explicit shr.
+
+	cmpb	$0, scanning			# Mode scan requested?
+	jz	mscan1
+	
+	call	mode_scan
+mscan1:
+
+#ifdef CONFIG_VIDEO_LOCAL
+	call	local_modes
+#endif /* CONFIG_VIDEO_LOCAL */
+
+#ifdef CONFIG_VIDEO_VESA
+	call	vesa_modes			# Detect VESA VGA modes
+#endif /* CONFIG_VIDEO_VESA */
+
+#ifdef CONFIG_VIDEO_SVGA
+	cmpb	$0, scanning			# Bypass when scanning
+	jnz	mscan2
+	
+	call	svga_modes			# Detect SVGA cards & modes
+mscan2:
+#endif /* CONFIG_VIDEO_SVGA */
+
+mtabe:
+
+#ifdef CONFIG_VIDEO_COMPACT
+	leaw	modelist, %si
+	movw	%di, %dx
+	movw	%si, %di
+cmt1:	cmpw	%dx, %si			# Scan all modes
+	jz	cmt2
+
+	leaw	modelist, %bx			# Find in previous entries
+	movw	2(%si), %cx
+cmt3:	cmpw	%bx, %si
+	jz	cmt4
+
+	cmpw	2(%bx), %cx			# Found => don't copy this entry
+	jz	cmt5
+
+	addw	$4, %bx
+	jmp	cmt3
+
+cmt4:	movsl					# Copy entry
+	jmp	cmt1
+
+cmt5:	addw	$4, %si				# Skip entry
+	jmp	cmt1
+
+cmt2:
+#endif	/* CONFIG_VIDEO_COMPACT */
+
+	movw	$ASK_VGA, (%di)			# End marker
+	movw	%di, mt_end
+mtab1:	leaw	modelist, %si			# SI=mode list, DI=list end
+ret0:	ret
+
+# Modes usable on all standard VGAs
+vga_modes:
+	.word	VIDEO_8POINT
+	.word	0x5032				# 80x50
+	.word	VIDEO_80x43
+	.word	0x502b				# 80x43
+	.word	VIDEO_80x28
+	.word	0x501c				# 80x28
+	.word	VIDEO_80x30
+	.word	0x501e				# 80x30
+	.word	VIDEO_80x34
+	.word	0x5022				# 80x34
+	.word	VIDEO_80x60
+	.word	0x503c				# 80x60
+#ifdef CONFIG_VIDEO_GFX_HACK
+	.word	VIDEO_GFX_HACK
+	.word	VIDEO_GFX_DUMMY_RESOLUTION
+#endif
+
+vga_modes_end:
+# Detect VESA modes.
+
+#ifdef CONFIG_VIDEO_VESA
+vesa_modes:
+	cmpb	$2, adapter			# VGA only
+	jnz	ret0
+
+	movw	%di, %bp			# BP=original mode table end
+	addw	$0x200, %di			# Buffer space
+	movw	$0x4f00, %ax			# VESA Get card info call
+	int	$0x10
+	movw	%bp, %di
+	cmpw	$0x004f, %ax			# Successful?
+	jnz	ret0
+	
+	cmpw	$0x4556, 0x200(%di)
+	jnz	ret0
+	
+	cmpw	$0x4153, 0x202(%di)
+	jnz	ret0
+	
+	movw	$vesa_name, card_name		# Set name to "VESA VGA"
+	pushw	%gs
+	lgsw	0x20e(%di), %si			# GS:SI=mode list
+	movw	$128, %cx			# Iteration limit
+vesa1:
+# gas version 2.9.1, using BFD version 2.9.1.0.23 buggers the next inst.
+# XXX:	lodsw	%gs:(%si), %ax			# Get next mode in the list
+	gs; lodsw
+	cmpw	$0xffff, %ax			# End of the table?
+	jz	vesar
+	
+	cmpw	$0x0080, %ax			# Check validity of mode ID
+	jc	vesa2
+	
+	orb	%ah, %ah		# Valid IDs: 0x0000-0x007f/0x0100-0x07ff
+	jz	vesan			# Certain BIOSes report 0x80-0xff!
+
+	cmpw	$0x0800, %ax
+	jnc	vesae
+
+vesa2:	pushw	%cx
+	movw	%ax, %cx			# Get mode information structure
+	movw	$0x4f01, %ax
+	int	$0x10
+	movw	%cx, %bx			# BX=mode number
+	addb	$VIDEO_FIRST_VESA>>8, %bh
+	popw	%cx
+	cmpw	$0x004f, %ax
+	jnz	vesan			# Don't report errors (buggy BIOSES)
+
+	movb	(%di), %al			# Check capabilities. We require
+	andb	$0x19, %al			# a color text mode.
+	cmpb	$0x09, %al
+	jnz	vesan
+	
+	cmpw	$0xb800, 8(%di)		# Standard video memory address required
+	jnz	vesan
+
+	testb	$2, (%di)			# Mode characteristics supplied?
+	movw	%bx, (%di)			# Store mode number
+	jz	vesa3
+	
+	xorw	%dx, %dx
+	movw	0x12(%di), %bx			# Width
+	orb	%bh, %bh
+	jnz	vesan
+	
+	movb	%bl, 0x3(%di)
+	movw	0x14(%di), %ax			# Height
+	orb	%ah, %ah
+	jnz	vesan
+	
+	movb	%al, 2(%di)
+	mulb	%bl
+	cmpw	$8193, %ax		# Small enough for Linux console driver?
+	jnc	vesan
+
+	jmp	vesaok
+
+vesa3:	subw	$0x8108, %bx	# This mode has no detailed info specified,
+	jc	vesan		# so it must be a standard VESA mode.
+
+	cmpw	$5, %bx
+	jnc	vesan
+
+	movw	vesa_text_mode_table(%bx), %ax
+	movw	%ax, 2(%di)
+vesaok:	addw	$4, %di				# The mode is valid. Store it.
+vesan:	loop	vesa1			# Next mode. Limit exceeded => error
+vesae:	leaw	vesaer, %si
+	call	prtstr
+	movw	%bp, %di			# Discard already found modes.
+vesar:	popw	%gs
+	ret
+
+# Dimensions of standard VESA text modes
+vesa_text_mode_table:
+	.byte	60, 80				# 0108
+	.byte	25, 132				# 0109
+	.byte	43, 132				# 010A
+	.byte	50, 132				# 010B
+	.byte	60, 132				# 010C
+#endif	/* CONFIG_VIDEO_VESA */
+
+# Scan for video modes. A bit dirty, but should work.
+mode_scan:
+	movw	$0x0100, %cx			# Start with mode 0
+scm1:	movb	$0, %ah				# Test the mode
+	movb	%cl, %al
+	int	$0x10
+	movb	$0x0f, %ah
+	int	$0x10
+	cmpb	%cl, %al
+	jnz	scm2				# Mode not set
+
+	movw	$0x3c0, %dx			# Test if it's a text mode
+	movb	$0x10, %al			# Mode bits
+	call	inidx
+	andb	$0x03, %al
+	jnz	scm2
+	
+	movb	$0xce, %dl			# Another set of mode bits
+	movb	$0x06, %al
+	call	inidx
+	shrb	%al
+	jc	scm2
+	
+	movb	$0xd4, %dl			# Cursor location
+	movb	$0x0f, %al
+	call	inidx
+	orb	%al, %al
+	jnz	scm2
+	
+	movw	%cx, %ax			# Ok, store the mode
+	stosw
+	movb	%gs:(0x484), %al		# Number of rows
+	incb	%al
+	stosb
+	movw	%gs:(0x44a), %ax		# Number of columns
+	stosb
+scm2:	incb	%cl
+	jns	scm1
+	
+	movw	$0x0003, %ax			# Return back to mode 3
+	int	$0x10
+	ret
+
+tstidx:	outw	%ax, %dx			# OUT DX,AX and inidx
+inidx:	outb	%al, %dx			# Read from indexed VGA register
+	incw	%dx			# AL=index, DX=index reg port -> AL=data
+	inb	%dx, %al
+	decw	%dx
+	ret
+
+# Try to detect type of SVGA card and supply (usually approximate) video
+# mode table for it.
+
+#ifdef CONFIG_VIDEO_SVGA
+svga_modes:
+	leaw	svga_table, %si			# Test all known SVGA adapters
+dosvga:	lodsw
+	movw	%ax, %bp			# Default mode table
+	orw	%ax, %ax
+	jz	didsv1
+
+	lodsw					# Pointer to test routine
+	pushw	%si
+	pushw	%di
+	pushw	%es
+	movw	$0xc000, %bx
+	movw	%bx, %es
+	call	*%ax				# Call test routine
+	popw	%es
+	popw	%di
+	popw	%si
+	orw	%bp, %bp
+	jz	dosvga
+	
+	movw	%bp, %si			# Found, copy the modes
+	movb	svga_prefix, %ah
+cpsvga:	lodsb
+	orb	%al, %al
+	jz	didsv
+	
+	stosw
+	movsw
+	jmp	cpsvga
+
+didsv:	movw	%si, card_name			# Store pointer to card name
+didsv1:	ret
+
+# Table of all known SVGA cards. For each card, we store a pointer to
+# a table of video modes supported by the card and a pointer to a routine
+# used for testing of presence of the card. The video mode table is always
+# followed by the name of the card or the chipset.
+svga_table:
+	.word	ati_md, ati_test
+	.word	oak_md, oak_test
+	.word	paradise_md, paradise_test
+	.word	realtek_md, realtek_test
+	.word	s3_md, s3_test
+	.word	chips_md, chips_test
+	.word	video7_md, video7_test
+	.word	cirrus5_md, cirrus5_test
+	.word	cirrus6_md, cirrus6_test
+	.word	cirrus1_md, cirrus1_test
+	.word	ahead_md, ahead_test
+	.word	everex_md, everex_test
+	.word	genoa_md, genoa_test
+	.word	trident_md, trident_test
+	.word	tseng_md, tseng_test
+	.word	0
+
+# Test routines and mode tables:
+
+# S3 - The test algorithm was taken from the SuperProbe package
+# for XFree86 1.2.1. Report bugs to Christoph.Niemann@linux.org
+s3_test:
+	movw	$0x0f35, %cx	# we store some constants in cl/ch
+	movw	$0x03d4, %dx
+	movb	$0x38, %al
+	call	inidx
+	movb	%al, %bh	# store current CRT-register 0x38
+	movw	$0x0038, %ax
+	call	outidx		# disable writing to special regs
+	movb	%cl, %al	# check whether we can write special reg 0x35
+	call	inidx
+	movb	%al, %bl	# save the current value of CRT reg 0x35
+	andb	$0xf0, %al	# clear bits 0-3
+	movb	%al, %ah
+	movb	%cl, %al	# and write it to CRT reg 0x35
+	call	outidx
+	call	inidx		# now read it back
+	andb	%ch, %al	# clear the upper 4 bits
+	jz	s3_2		# the first test failed. But we have a
+
+	movb	%bl, %ah	# second chance
+	movb	%cl, %al
+	call	outidx
+	jmp	s3_1		# do the other tests
+
+s3_2:	movw	%cx, %ax	# load ah with 0xf and al with 0x35
+	orb	%bl, %ah	# set the upper 4 bits of ah with the orig value
+	call	outidx		# write ...
+	call	inidx		# ... and reread 
+	andb	%cl, %al	# turn off the upper 4 bits
+	pushw	%ax
+	movb	%bl, %ah	# restore old value in register 0x35
+	movb	%cl, %al
+	call	outidx
+	popw	%ax
+	cmpb	%ch, %al	# setting lower 4 bits was successful => bad
+	je	no_s3		# writing is allowed => this is not an S3
+
+s3_1:	movw	$0x4838, %ax	# allow writing to special regs by putting
+	call	outidx		# magic number into CRT-register 0x38
+	movb	%cl, %al	# check whether we can write special reg 0x35
+	call	inidx
+	movb	%al, %bl
+	andb	$0xf0, %al
+	movb	%al, %ah
+	movb	%cl, %al
+	call	outidx
+	call	inidx
+	andb	%ch, %al
+	jnz	no_s3		# no, we can't write => no S3
+
+	movw	%cx, %ax
+	orb	%bl, %ah
+	call	outidx
+	call	inidx
+	andb	%ch, %al
+	pushw	%ax
+	movb	%bl, %ah	# restore old value in register 0x35
+	movb	%cl, %al
+	call	outidx
+	popw	%ax
+	cmpb	%ch, %al
+	jne	no_s31		# writing not possible => no S3
+	movb	$0x30, %al
+	call	inidx		# now get the S3 id ...
+	leaw	idS3, %di
+	movw	$0x10, %cx
+	repne
+	scasb
+	je	no_s31
+
+	movb	%bh, %ah
+	movb	$0x38, %al
+	jmp	s3rest
+
+no_s3:	movb	$0x35, %al	# restore CRT register 0x35
+	movb	%bl, %ah
+	call	outidx
+no_s31:	xorw	%bp, %bp	# Detection failed
+s3rest:	movb	%bh, %ah
+	movb	$0x38, %al	# restore old value of CRT register 0x38
+	jmp	outidx
+
+idS3:	.byte	0x81, 0x82, 0x90, 0x91, 0x92, 0x93, 0x94, 0x95
+	.byte	0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa8, 0xb0
+
+s3_md:	.byte	0x54, 0x2b, 0x84
+	.byte	0x55, 0x19, 0x84
+	.byte	0
+	.ascii	"S3"
+	.byte	0
+
+# ATI cards.
+ati_test:
+	leaw 	idati, %si
+	movw	$0x31, %di
+	movw	$0x09, %cx
+	repe
+	cmpsb
+	je	atiok
+
+	xorw	%bp, %bp
+atiok:	ret
+
+idati:	.ascii	"761295520"
+
+ati_md:	.byte	0x23, 0x19, 0x84
+	.byte	0x33, 0x2c, 0x84
+	.byte	0x22, 0x1e, 0x64
+	.byte	0x21, 0x19, 0x64
+	.byte	0x58, 0x21, 0x50
+	.byte	0x5b, 0x1e, 0x50
+	.byte	0
+	.ascii	"ATI"
+	.byte	0
+
+# AHEAD
+ahead_test:
+	movw	$0x200f, %ax
+	movw	$0x3ce, %dx
+	outw	%ax, %dx
+	incw	%dx
+	inb	%dx, %al
+	cmpb	$0x20, %al
+	je	isahed
+
+	cmpb	$0x21, %al
+	je	isahed
+	
+	xorw	%bp, %bp
+isahed:	ret
+
+ahead_md:
+	.byte	0x22, 0x2c, 0x84
+	.byte	0x23, 0x19, 0x84
+	.byte	0x24, 0x1c, 0x84
+	.byte	0x2f, 0x32, 0xa0
+	.byte	0x32, 0x22, 0x50
+	.byte	0x34, 0x42, 0x50
+	.byte	0
+	.ascii	"Ahead"
+	.byte	0
+
+# Chips & Tech.
+chips_test:
+	movw	$0x3c3, %dx
+	inb	%dx, %al
+	orb	$0x10, %al
+	outb	%al, %dx
+	movw	$0x104, %dx
+	inb	%dx, %al
+	movb	%al, %bl
+	movw	$0x3c3, %dx
+	inb	%dx, %al
+	andb	$0xef, %al
+	outb	%al, %dx
+	cmpb	$0xa5, %bl
+	je	cantok
+	
+	xorw	%bp, %bp
+cantok:	ret
+
+chips_md:
+	.byte	0x60, 0x19, 0x84
+	.byte	0x61, 0x32, 0x84
+	.byte	0
+	.ascii	"Chips & Technologies"
+	.byte	0
+
+# Cirrus Logic 5X0
+cirrus1_test:
+	movw	$0x3d4, %dx
+	movb	$0x0c, %al
+	outb	%al, %dx
+	incw	%dx
+	inb	%dx, %al
+	movb	%al, %bl
+	xorb	%al, %al
+	outb	%al, %dx
+	decw	%dx
+	movb	$0x1f, %al
+	outb	%al, %dx
+	incw	%dx
+	inb	%dx, %al
+	movb	%al, %bh
+	xorb	%ah, %ah
+	shlb	$4, %al
+	movw	%ax, %cx
+	movb	%bh, %al
+	shrb	$4, %al
+	addw	%ax, %cx
+	shlw	$8, %cx
+	addw	$6, %cx
+	movw	%cx, %ax
+	movw	$0x3c4, %dx
+	outw	%ax, %dx
+	incw	%dx
+	inb	%dx, %al
+	andb	%al, %al
+	jnz	nocirr
+	
+	movb	%bh, %al
+	outb	%al, %dx
+	inb	%dx, %al
+	cmpb	$0x01, %al
+	je	iscirr
+
+nocirr:	xorw	%bp, %bp
+iscirr: movw	$0x3d4, %dx
+	movb	%bl, %al
+	xorb	%ah, %ah
+	shlw	$8, %ax
+	addw	$0x0c, %ax
+	outw	%ax, %dx
+	ret
+
+cirrus1_md:
+	.byte	0x1f, 0x19, 0x84
+	.byte	0x20, 0x2c, 0x84
+	.byte	0x22, 0x1e, 0x84
+	.byte	0x31, 0x25, 0x64
+	.byte	0
+	.ascii	"Cirrus Logic 5X0"
+	.byte	0
+
+# Cirrus Logic 54XX
+cirrus5_test:
+	movw	$0x3c4, %dx
+	movb	$6, %al
+	call	inidx
+	movb	%al, %bl			# BL=backup
+	movw	$6, %ax
+	call	tstidx
+	cmpb	$0x0f, %al
+	jne	c5fail
+	
+	movw	$0x1206, %ax
+	call	tstidx
+	cmpb	$0x12, %al
+	jne	c5fail
+	
+	movb	$0x1e, %al
+	call	inidx
+	movb	%al, %bh
+	movb	%bh, %ah
+	andb	$0xc0, %ah
+	movb	$0x1e, %al
+	call	tstidx
+	andb	$0x3f, %al
+	jne	c5xx
+	
+	movb	$0x1e, %al
+	movb	%bh, %ah
+	orb	$0x3f, %ah
+	call	tstidx
+	xorb	$0x3f, %al
+	andb	$0x3f, %al
+c5xx:	pushf
+	movb	$0x1e, %al
+	movb	%bh, %ah
+	outw	%ax, %dx
+	popf
+	je	c5done
+
+c5fail:	xorw	%bp, %bp
+c5done:	movb	$6, %al
+	movb	%bl, %ah
+	outw	%ax, %dx
+	ret
+
+cirrus5_md:
+	.byte	0x14, 0x19, 0x84
+	.byte	0x54, 0x2b, 0x84
+	.byte	0
+	.ascii	"Cirrus Logic 54XX"
+	.byte	0
+
+# Cirrus Logic 64XX -- no known extra modes, but must be identified, because
+# it's misidentified by the Ahead test.
+cirrus6_test:
+	movw	$0x3ce, %dx
+	movb	$0x0a, %al
+	call	inidx
+	movb	%al, %bl	# BL=backup
+	movw	$0xce0a, %ax
+	call	tstidx
+	orb	%al, %al
+	jne	c2fail
+	
+	movw	$0xec0a, %ax
+	call	tstidx
+	cmpb	$0x01, %al
+	jne	c2fail
+	
+	movb	$0xaa, %al
+	call	inidx		# 4X, 5X, 7X and 8X are valid 64XX chip ID's. 
+	shrb	$4, %al
+	subb	$4, %al
+	jz	c6done
+	
+	decb	%al
+	jz	c6done
+	
+	subb	$2, %al
+	jz	c6done
+	
+	decb	%al
+	jz	c6done
+	
+c2fail:	xorw	%bp, %bp
+c6done:	movb	$0x0a, %al
+	movb	%bl, %ah
+	outw	%ax, %dx
+	ret
+
+cirrus6_md:
+	.byte	0
+	.ascii	"Cirrus Logic 64XX"
+	.byte	0
+
+# Everex / Trident
+everex_test:
+	movw	$0x7000, %ax
+	xorw	%bx, %bx
+	int	$0x10
+	cmpb	$0x70, %al
+	jne	noevrx
+	
+	shrw	$4, %dx
+	cmpw	$0x678, %dx
+	je	evtrid
+	
+	cmpw	$0x236, %dx
+	jne	evrxok
+
+evtrid:	leaw	trident_md, %bp
+evrxok:	ret
+
+noevrx:	xorw	%bp, %bp
+	ret
+
+everex_md:
+	.byte	0x03, 0x22, 0x50
+	.byte	0x04, 0x3c, 0x50
+	.byte	0x07, 0x2b, 0x64
+	.byte	0x08, 0x4b, 0x64
+	.byte	0x0a, 0x19, 0x84
+	.byte	0x0b, 0x2c, 0x84
+	.byte	0x16, 0x1e, 0x50
+	.byte	0x18, 0x1b, 0x64
+	.byte	0x21, 0x40, 0xa0
+	.byte	0x40, 0x1e, 0x84
+	.byte	0
+	.ascii	"Everex/Trident"
+	.byte	0
+
+# Genoa.
+genoa_test:
+	leaw	idgenoa, %si			# Check Genoa 'clues'
+	xorw	%ax, %ax
+	movb	%es:(0x37), %al
+	movw	%ax, %di
+	movw	$0x04, %cx
+	decw	%si
+	decw	%di
+l1:	incw	%si
+	incw	%di
+	movb	(%si), %al
+	testb	%al, %al
+	jz	l2
+
+	cmpb	%es:(%di), %al
+l2:	loope 	l1
+	orw	%cx, %cx
+	je	isgen
+	
+	xorw	%bp, %bp
+isgen:	ret
+
+idgenoa: .byte	0x77, 0x00, 0x99, 0x66
+
+genoa_md:
+	.byte	0x58, 0x20, 0x50
+	.byte	0x5a, 0x2a, 0x64
+	.byte	0x60, 0x19, 0x84
+	.byte	0x61, 0x1d, 0x84
+	.byte	0x62, 0x20, 0x84
+	.byte	0x63, 0x2c, 0x84
+	.byte	0x64, 0x3c, 0x84
+	.byte	0x6b, 0x4f, 0x64
+	.byte	0x72, 0x3c, 0x50
+	.byte	0x74, 0x42, 0x50
+	.byte	0x78, 0x4b, 0x64
+	.byte	0
+	.ascii	"Genoa"
+	.byte	0
+
+# OAK
+oak_test:
+	leaw	idoakvga, %si
+	movw	$0x08, %di
+	movw	$0x08, %cx
+	repe
+	cmpsb
+	je	isoak
+	
+	xorw	%bp, %bp
+isoak:	ret
+
+idoakvga: .ascii  "OAK VGA "
+
+oak_md: .byte	0x4e, 0x3c, 0x50
+	.byte	0x4f, 0x3c, 0x84
+	.byte	0x50, 0x19, 0x84
+	.byte	0x51, 0x2b, 0x84
+	.byte	0
+	.ascii	"OAK"
+	.byte	0
+
+# WD Paradise.
+paradise_test:
+	leaw	idparadise, %si
+	movw	$0x7d, %di
+	movw	$0x04, %cx
+	repe
+	cmpsb
+	je	ispara
+	
+	xorw	%bp, %bp
+ispara:	ret
+
+idparadise:	.ascii	"VGA="
+
+paradise_md:
+	.byte	0x41, 0x22, 0x50
+	.byte	0x47, 0x1c, 0x84
+	.byte	0x55, 0x19, 0x84
+	.byte	0x54, 0x2c, 0x84
+	.byte	0
+	.ascii	"Paradise"
+	.byte	0
+
+# Trident.
+trident_test:
+	movw	$0x3c4, %dx
+	movb	$0x0e, %al
+	outb	%al, %dx
+	incw	%dx
+	inb	%dx, %al
+	xchgb	%al, %ah
+	xorb	%al, %al
+	outb	%al, %dx
+	inb	%dx, %al
+	xchgb	%ah, %al
+	movb	%al, %bl	# Strange thing ... in the book this wasn't
+	andb	$0x02, %bl	# necessary but it worked on my card which
+	jz	setb2		# is a trident. Without it the screen goes
+				# blurred ...
+	andb	$0xfd, %al
+	jmp	clrb2		
+
+setb2:	orb	$0x02, %al	
+clrb2:	outb	%al, %dx
+	andb	$0x0f, %ah
+	cmpb	$0x02, %ah
+	je	istrid
+
+	xorw	%bp, %bp
+istrid:	ret
+
+trident_md:
+	.byte	0x50, 0x1e, 0x50
+	.byte	0x51, 0x2b, 0x50
+	.byte	0x52, 0x3c, 0x50
+	.byte	0x57, 0x19, 0x84
+	.byte	0x58, 0x1e, 0x84
+	.byte	0x59, 0x2b, 0x84
+	.byte	0x5a, 0x3c, 0x84
+	.byte	0
+	.ascii	"Trident"
+	.byte	0
+
+# Tseng.
+tseng_test:
+	movw	$0x3cd, %dx
+	inb	%dx, %al	# Could things be this simple ! :-)
+	movb	%al, %bl
+	movb	$0x55, %al
+	outb	%al, %dx
+	inb	%dx, %al
+	movb	%al, %ah
+	movb	%bl, %al
+	outb	%al, %dx
+	cmpb	$0x55, %ah
+ 	je	istsen
+
+isnot:	xorw	%bp, %bp
+istsen:	ret
+
+tseng_md:
+	.byte	0x26, 0x3c, 0x50
+	.byte	0x2a, 0x28, 0x64
+	.byte	0x23, 0x19, 0x84
+	.byte	0x24, 0x1c, 0x84
+	.byte	0x22, 0x2c, 0x84
+	.byte	0x21, 0x3c, 0x84
+	.byte	0
+	.ascii	"Tseng"
+	.byte	0
+
+# Video7.
+video7_test:
+	movw	$0x3cc, %dx
+	inb	%dx, %al
+	movw	$0x3b4, %dx
+	andb	$0x01, %al
+	jz	even7
+
+	movw	$0x3d4, %dx
+even7:	movb	$0x0c, %al
+	outb	%al, %dx
+	incw	%dx
+	inb	%dx, %al
+	movb	%al, %bl
+	movb	$0x55, %al
+	outb	%al, %dx
+	inb	%dx, %al
+	decw	%dx
+	movb	$0x1f, %al
+	outb	%al, %dx
+	incw	%dx
+	inb	%dx, %al
+	movb	%al, %bh
+	decw	%dx
+	movb	$0x0c, %al
+	outb	%al, %dx
+	incw	%dx
+	movb	%bl, %al
+	outb	%al, %dx
+	movb	$0x55, %al
+	xorb	$0xea, %al
+	cmpb	%bh, %al
+	jne	isnot
+	
+	movb	$VIDEO_FIRST_V7>>8, svga_prefix # Use special mode switching
+	ret
+
+video7_md:
+	.byte	0x40, 0x2b, 0x50
+	.byte	0x43, 0x3c, 0x50
+	.byte	0x44, 0x3c, 0x64
+	.byte	0x41, 0x19, 0x84
+	.byte	0x42, 0x2c, 0x84
+	.byte	0x45, 0x1c, 0x84
+	.byte	0
+	.ascii	"Video 7"
+	.byte	0
+
+# Realtek VGA
+realtek_test:
+	leaw	idrtvga, %si
+	movw	$0x45, %di
+	movw	$0x0b, %cx
+	repe
+	cmpsb
+	je	isrt
+	
+	xorw	%bp, %bp
+isrt:	ret
+
+idrtvga:	.ascii	"REALTEK VGA"
+
+realtek_md:
+	.byte	0x1a, 0x3c, 0x50
+	.byte	0x1b, 0x19, 0x84
+	.byte	0x1c, 0x1e, 0x84
+	.byte	0x1d, 0x2b, 0x84
+	.byte	0x1e, 0x3c, 0x84
+	.byte	0
+	.ascii	"REALTEK"
+	.byte	0
+
+#endif	/* CONFIG_VIDEO_SVGA */
+
+# User-defined local mode table (VGA only)
+#ifdef CONFIG_VIDEO_LOCAL
+local_modes:
+	leaw	local_mode_table, %si
+locm1:	lodsw
+	orw	%ax, %ax
+	jz	locm2
+	
+	stosw
+	movsw
+	jmp	locm1
+
+locm2:	ret
+
+# This is the table of local video modes which can be supplied manually
+# by the user. Each entry consists of mode ID (word) and dimensions
+# (byte for column count and another byte for row count). These modes
+# are placed before all SVGA and VESA modes and override them if table
+# compacting is enabled. The table must end with a zero word followed
+# by NUL-terminated video adapter name.
+local_mode_table:
+	.word	0x0100				# Example: 40x25
+	.byte	25,40
+	.word	0
+	.ascii	"Local"
+	.byte	0
+#endif	/* CONFIG_VIDEO_LOCAL */
+
+# Read a key and return the ASCII code in al, scan code in ah
+getkey:	xorb	%ah, %ah
+	int	$0x16
+	ret
+
+# Read a key with a timeout of 30 seconds.
+# The hardware clock is used to get the time.
+getkt:	call	gettime
+	addb	$30, %al			# Wait 30 seconds
+	cmpb	$60, %al
+	jl	lminute
+
+	subb	$60, %al
+lminute:
+	movb	%al, %cl
+again:	movb	$0x01, %ah
+	int	$0x16
+	jnz	getkey				# key pressed, so get it
+
+	call	gettime
+	cmpb	%cl, %al
+	jne	again
+
+	movb	$0x20, %al			# timeout, return `space'
+	ret
+
+# Flush the keyboard buffer
+flush:	movb	$0x01, %ah
+	int	$0x16
+	jz	empty
+	
+	xorb	%ah, %ah
+	int	$0x16
+	jmp	flush
+
+empty:	ret
+
+# Print hexadecimal number.
+prthw:	pushw	%ax
+	movb	%ah, %al
+	call	prthb
+	popw	%ax
+prthb:	pushw	%ax
+	shrb	$4, %al
+	call	prthn
+	popw	%ax
+	andb	$0x0f, %al
+prthn:	cmpb	$0x0a, %al
+	jc	prth1
+
+	addb	$0x07, %al
+prth1:	addb	$0x30, %al
+	jmp	prtchr
+
+# Print decimal number in al
+prtdec:	pushw	%ax
+	pushw	%cx
+	xorb	%ah, %ah
+	movb	$0x0a, %cl
+	idivb	%cl
+	cmpb	$0x09, %al
+	jbe	lt100
+
+	call	prtdec
+	jmp	skip10
+
+lt100:	addb	$0x30, %al
+	call	prtchr
+skip10:	movb	%ah, %al
+	addb	$0x30, %al
+	call	prtchr	
+	popw	%cx
+	popw	%ax
+	ret
+
+store_edid:
+	pushw	%es				# just save all registers
+	pushw	%ax
+	pushw	%bx
+	pushw   %cx
+	pushw	%dx
+	pushw   %di
+
+	pushw	%fs
+	popw    %es
+
+	movl	$0x13131313, %eax		# memset block with 0x13
+	movw    $32, %cx
+	movw	$0x140, %di
+	cld
+	rep
+	stosl
+
+	movw	$0x4f15, %ax                    # do VBE/DDC
+	movw	$0x01, %bx
+	movw	$0x00, %cx
+	movw    $0x01, %dx
+	movw	$0x140, %di
+	int	$0x10
+
+	popw	%di				# restore all registers
+	popw	%dx
+	popw	%cx
+	popw	%bx
+	popw	%ax
+	popw	%es
+	ret
+
+# VIDEO_SELECT-only variables
+mt_end:		.word	0	# End of video mode table if built
+edit_buf:	.space	6	# Line editor buffer
+card_name:	.word	0	# Pointer to adapter name
+scanning:	.byte	0	# Performing mode scan
+do_restore:	.byte	0	# Screen contents altered during mode change
+svga_prefix:	.byte	VIDEO_FIRST_BIOS>>8	# Default prefix for BIOS modes
+graphic_mode:	.byte	0	# Graphic mode with a linear frame buffer
+dac_size:	.byte	6	# DAC bit depth
+
+# Status messages
+keymsg:		.ascii	"Press <RETURN> to see video modes available, "
+		.ascii	"<SPACE> to continue or wait 30 secs"
+		.byte	0x0d, 0x0a, 0
+
+listhdr:	.byte	0x0d, 0x0a
+		.ascii	"Mode:    COLSxROWS:"
+
+crlft:		.byte	0x0d, 0x0a, 0
+
+prompt:		.byte	0x0d, 0x0a
+		.asciz	"Enter mode number or `scan': "
+
+unknt:		.asciz	"Unknown mode ID. Try again."
+
+badmdt:		.ascii	"You passed an undefined mode number."
+		.byte	0x0d, 0x0a, 0
+
+vesaer:		.ascii	"Error: Scanning of VESA modes failed. Please "
+		.ascii	"report to <mj@ucw.cz>."
+		.byte	0x0d, 0x0a, 0
+
+old_name:	.asciz	"CGA/MDA/HGA"
+
+ega_name:	.asciz	"EGA"
+
+svga_name:	.ascii	" "
+
+vga_name:	.asciz	"VGA"
+
+vesa_name:	.asciz	"VESA"
+
+name_bann:	.asciz	"Video adapter: "
+#endif /* CONFIG_VIDEO_SELECT */
+
+# Other variables:
+adapter:	.byte	0	# Video adapter: 0=CGA/MDA/HGA,1=EGA,2=VGA
+video_segment:	.word	0xb800	# Video memory segment
+force_size:	.word	0	# Use this size instead of the one in BIOS vars