Merge branch 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull uaccess.h prepwork from Al Viro:
 "Preparations to tree-wide switch to use of linux/uaccess.h (which,
  obviously, will allow to start unifying stuff for real). The last step
  there, ie

    PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
    sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
            `git grep -l "$PATT"|grep -v ^include/linux/uaccess.h`

  is not taken here - I would prefer to do it once just before or just
  after -rc1.  However, everything should be ready for it"

* 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  remove a stray reference to asm/uaccess.h in docs
  sparc64: separate extable_64.h, switch elf_64.h to it
  score: separate extable.h, switch module.h to it
  mips: separate extable.h, switch module.h to it
  x86: separate extable.h, switch sections.h to it
  remove stray include of asm/uaccess.h from cacheflush.h
  mn10300: remove a bogus processor.h->uaccess.h include
  xtensa: split uaccess.h into C and asm sides
  bonding: quit messing with IOCTL
  kill __kernel_ds_p off
  mn10300: finish verify_area() off
  frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h
  exceptions: detritus removal

5 files changed, 38 insertions, 34 deletions

diff --git a/arch/x86/include/asm/cacheflush.h b/arch/x86/include/asm/cacheflush.h
index 61518cf79437..872877d930de 100644
--- a/arch/x86/include/asm/cacheflush.h
+++ b/arch/x86/include/asm/cacheflush.h
@@ -4,7 +4,6 @@
 /* Caches aren't brain-dead on the intel. */
 #include <asm-generic/cacheflush.h>
 #include <asm/special_insns.h>
-#include <asm/uaccess.h>
 
 /*
  * The set_memory_* API can be used to change various attributes of a virtual
diff --git a/arch/x86/include/asm/extable.h b/arch/x86/include/asm/extable.h
new file mode 100644
index 000000000000..b8ad261d11dc
--- /dev/null
+++ b/arch/x86/include/asm/extable.h
@@ -0,0 +1,35 @@
+#ifndef _ASM_X86_EXTABLE_H
+#define _ASM_X86_EXTABLE_H
+/*
+ * The exception table consists of triples of addresses relative to the
+ * exception table entry itself. The first address is of an instruction
+ * that is allowed to fault, the second is the target at which the program
+ * should continue. The third is a handler function to deal with the fault
+ * caused by the instruction in the first field.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+	int insn, fixup, handler;
+};
+struct pt_regs;
+
+#define ARCH_HAS_RELATIVE_EXTABLE
+
+#define swap_ex_entry_fixup(a, b, tmp, delta)			\
+	do {							\
+		(a)->fixup = (b)->fixup + (delta);		\
+		(b)->fixup = (tmp).fixup - (delta);		\
+		(a)->handler = (b)->handler + (delta);		\
+		(b)->handler = (tmp).handler - (delta);		\
+	} while (0)
+
+extern int fixup_exception(struct pt_regs *regs, int trapnr);
+extern bool ex_has_fault_handler(unsigned long ip);
+extern void early_fixup_exception(struct pt_regs *regs, int trapnr);
+
+#endif
diff --git a/arch/x86/include/asm/sections.h b/arch/x86/include/asm/sections.h
index 13b6cdd0af57..2f75f30cb2f6 100644
--- a/arch/x86/include/asm/sections.h
+++ b/arch/x86/include/asm/sections.h
@@ -2,7 +2,7 @@
 #define _ASM_X86_SECTIONS_H
 
 #include <asm-generic/sections.h>
-#include <asm/uaccess.h>
+#include <asm/extable.h>
 
 extern char __brk_base[], __brk_limit[];
 extern struct exception_table_entry __stop___ex_table[];
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 2131c4ce7d8a..faf3687f1035 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -11,6 +11,7 @@
 #include <asm/asm.h>
 #include <asm/page.h>
 #include <asm/smap.h>
+#include <asm/extable.h>
 
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
@@ -91,37 +92,6 @@ static inline bool __chk_range_not_ok(unsigned long addr, unsigned long size, un
 	likely(!__range_not_ok(addr, size, user_addr_max()))
 
 /*
- * The exception table consists of triples of addresses relative to the
- * exception table entry itself. The first address is of an instruction
- * that is allowed to fault, the second is the target at which the program
- * should continue. The third is a handler function to deal with the fault
- * caused by the instruction in the first field.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
-	int insn, fixup, handler;
-};
-
-#define ARCH_HAS_RELATIVE_EXTABLE
-
-#define swap_ex_entry_fixup(a, b, tmp, delta)			\
-	do {							\
-		(a)->fixup = (b)->fixup + (delta);		\
-		(b)->fixup = (tmp).fixup - (delta);		\
-		(a)->handler = (b)->handler + (delta);		\
-		(b)->handler = (tmp).handler - (delta);		\
-	} while (0)
-
-extern int fixup_exception(struct pt_regs *regs, int trapnr);
-extern bool ex_has_fault_handler(unsigned long ip);
-extern void early_fixup_exception(struct pt_regs *regs, int trapnr);
-
-/*
  * These are the main single-value transfer routines.  They automatically
  * use the right size if we just have the right pointer type.
  *
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 4dc13340653e..9f72ca3b2669 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -5,7 +5,7 @@
  */
 #include <linux/sched.h>		/* test_thread_flag(), ...	*/
 #include <linux/kdebug.h>		/* oops_begin/end, ...		*/
-#include <linux/extable.h>		/* search_exception_table	*/
+#include <linux/extable.h>		/* search_exception_tables	*/
 #include <linux/bootmem.h>		/* max_low_pfn			*/
 #include <linux/kprobes.h>		/* NOKPROBE_SYMBOL, ...		*/
 #include <linux/mmiotrace.h>		/* kmmio_handler, ...		*/