summaryrefslogtreecommitdiffstats
path: root/arch/x86
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-11-26 10:12:28 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2019-11-26 10:12:28 -0800
commit5c4a1c090d8676d8b84e2ac40671602be44afdfc (patch)
tree1fc8c456266e37a7e5c2e584eeed546587142da0 /arch/x86
parent53a07a148fd05dc6d317745688270bc79fe73121 (diff)
parent4a13b0e3e10996b9aa0b45a764ecfe49f6fcd360 (diff)
downloadlinux-5c4a1c090d8676d8b84e2ac40671602be44afdfc.tar.bz2
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar: "These are the fixes left over from the v5.4 cycle: - Various low level 32-bit entry code fixes and improvements by Andy Lutomirski, Peter Zijlstra and Thomas Gleixner. - Fix 32-bit Xen PV breakage, by Jan Beulich" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/32: Fix FIXUP_ESPFIX_STACK with user CR3 x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise selftests/x86/sigreturn/32: Invalidate DS and ES when abusing the kernel selftests/x86/mov_ss_trap: Fix the SYSENTER test x86/entry/32: Fix NMI vs ESPFIX x86/entry/32: Unwind the ESPFIX stack earlier on exception entry x86/entry/32: Move FIXUP_FRAME after pushing %fs in SAVE_ALL x86/entry/32: Use %ss segment where required x86/entry/32: Fix IRET exception x86/cpu_entry_area: Add guard page for entry stack on 32bit x86/pti/32: Size initial_page_table correctly x86/doublefault/32: Fix stack canaries in the double fault handler x86/xen/32: Simplify ring check in xen_iret_crit_fixup() x86/xen/32: Make xen_iret_crit_fixup() independent of frame layout x86/stackframe/32: Repair 32-bit Xen PV
Diffstat (limited to 'arch/x86')
-rw-r--r--arch/x86/entry/entry_32.S211
-rw-r--r--arch/x86/include/asm/cpu_entry_area.h18
-rw-r--r--arch/x86/include/asm/pgtable_32_types.h8
-rw-r--r--arch/x86/include/asm/segment.h12
-rw-r--r--arch/x86/kernel/doublefault.c3
-rw-r--r--arch/x86/kernel/head_32.S10
-rw-r--r--arch/x86/mm/cpu_entry_area.c4
-rw-r--r--arch/x86/xen/xen-asm_32.S75
8 files changed, 202 insertions, 139 deletions
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index f83ca5aa8b77..f07baf0388bc 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -172,7 +172,7 @@
ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
.if \no_user_check == 0
/* coming from usermode? */
- testl $SEGMENT_RPL_MASK, PT_CS(%esp)
+ testl $USER_SEGMENT_RPL_MASK, PT_CS(%esp)
jz .Lend_\@
.endif
/* On user-cr3? */
@@ -205,64 +205,76 @@
#define CS_FROM_ENTRY_STACK (1 << 31)
#define CS_FROM_USER_CR3 (1 << 30)
#define CS_FROM_KERNEL (1 << 29)
+#define CS_FROM_ESPFIX (1 << 28)
.macro FIXUP_FRAME
/*
* The high bits of the CS dword (__csh) are used for CS_FROM_*.
* Clear them in case hardware didn't do this for us.
*/
- andl $0x0000ffff, 3*4(%esp)
+ andl $0x0000ffff, 4*4(%esp)
#ifdef CONFIG_VM86
- testl $X86_EFLAGS_VM, 4*4(%esp)
+ testl $X86_EFLAGS_VM, 5*4(%esp)
jnz .Lfrom_usermode_no_fixup_\@
#endif
- testl $SEGMENT_RPL_MASK, 3*4(%esp)
+ testl $USER_SEGMENT_RPL_MASK, 4*4(%esp)
jnz .Lfrom_usermode_no_fixup_\@
- orl $CS_FROM_KERNEL, 3*4(%esp)
+ orl $CS_FROM_KERNEL, 4*4(%esp)
/*
* When we're here from kernel mode; the (exception) stack looks like:
*
- * 5*4(%esp) - <previous context>
- * 4*4(%esp) - flags
- * 3*4(%esp) - cs
- * 2*4(%esp) - ip
- * 1*4(%esp) - orig_eax
- * 0*4(%esp) - gs / function
+ * 6*4(%esp) - <previous context>
+ * 5*4(%esp) - flags
+ * 4*4(%esp) - cs
+ * 3*4(%esp) - ip
+ * 2*4(%esp) - orig_eax
+ * 1*4(%esp) - gs / function
+ * 0*4(%esp) - fs
*
* Lets build a 5 entry IRET frame after that, such that struct pt_regs
* is complete and in particular regs->sp is correct. This gives us
- * the original 5 enties as gap:
+ * the original 6 enties as gap:
*
- * 12*4(%esp) - <previous context>
- * 11*4(%esp) - gap / flags
- * 10*4(%esp) - gap / cs
- * 9*4(%esp) - gap / ip
- * 8*4(%esp) - gap / orig_eax
- * 7*4(%esp) - gap / gs / function
- * 6*4(%esp) - ss
- * 5*4(%esp) - sp
- * 4*4(%esp) - flags
- * 3*4(%esp) - cs
- * 2*4(%esp) - ip
- * 1*4(%esp) - orig_eax
- * 0*4(%esp) - gs / function
+ * 14*4(%esp) - <previous context>
+ * 13*4(%esp) - gap / flags
+ * 12*4(%esp) - gap / cs
+ * 11*4(%esp) - gap / ip
+ * 10*4(%esp) - gap / orig_eax
+ * 9*4(%esp) - gap / gs / function
+ * 8*4(%esp) - gap / fs
+ * 7*4(%esp) - ss
+ * 6*4(%esp) - sp
+ * 5*4(%esp) - flags
+ * 4*4(%esp) - cs
+ * 3*4(%esp) - ip
+ * 2*4(%esp) - orig_eax
+ * 1*4(%esp) - gs / function
+ * 0*4(%esp) - fs
*/
pushl %ss # ss
pushl %esp # sp (points at ss)
- addl $6*4, (%esp) # point sp back at the previous context
- pushl 6*4(%esp) # flags
- pushl 6*4(%esp) # cs
- pushl 6*4(%esp) # ip
- pushl 6*4(%esp) # orig_eax
- pushl 6*4(%esp) # gs / function
+ addl $7*4, (%esp) # point sp back at the previous context
+ pushl 7*4(%esp) # flags
+ pushl 7*4(%esp) # cs
+ pushl 7*4(%esp) # ip
+ pushl 7*4(%esp) # orig_eax
+ pushl 7*4(%esp) # gs / function
+ pushl 7*4(%esp) # fs
.Lfrom_usermode_no_fixup_\@:
.endm
.macro IRET_FRAME
+ /*
+ * We're called with %ds, %es, %fs, and %gs from the interrupted
+ * frame, so we shouldn't use them. Also, we may be in ESPFIX
+ * mode and therefore have a nonzero SS base and an offset ESP,
+ * so any attempt to access the stack needs to use SS. (except for
+ * accesses through %esp, which automatically use SS.)
+ */
testl $CS_FROM_KERNEL, 1*4(%esp)
jz .Lfinished_frame_\@
@@ -276,31 +288,40 @@
movl 5*4(%esp), %eax # (modified) regs->sp
movl 4*4(%esp), %ecx # flags
- movl %ecx, -4(%eax)
+ movl %ecx, %ss:-1*4(%eax)
movl 3*4(%esp), %ecx # cs
andl $0x0000ffff, %ecx
- movl %ecx, -8(%eax)
+ movl %ecx, %ss:-2*4(%eax)
movl 2*4(%esp), %ecx # ip
- movl %ecx, -12(%eax)
+ movl %ecx, %ss:-3*4(%eax)
movl 1*4(%esp), %ecx # eax
- movl %ecx, -16(%eax)
+ movl %ecx, %ss:-4*4(%eax)
popl %ecx
- lea -16(%eax), %esp
+ lea -4*4(%eax), %esp
popl %eax
.Lfinished_frame_\@:
.endm
-.macro SAVE_ALL pt_regs_ax=%eax switch_stacks=0 skip_gs=0
+.macro SAVE_ALL pt_regs_ax=%eax switch_stacks=0 skip_gs=0 unwind_espfix=0
cld
.if \skip_gs == 0
PUSH_GS
.endif
- FIXUP_FRAME
pushl %fs
+
+ pushl %eax
+ movl $(__KERNEL_PERCPU), %eax
+ movl %eax, %fs
+.if \unwind_espfix > 0
+ UNWIND_ESPFIX_STACK
+.endif
+ popl %eax
+
+ FIXUP_FRAME
pushl %es
pushl %ds
pushl \pt_regs_ax
@@ -313,8 +334,6 @@
movl $(__USER_DS), %edx
movl %edx, %ds
movl %edx, %es
- movl $(__KERNEL_PERCPU), %edx
- movl %edx, %fs
.if \skip_gs == 0
SET_KERNEL_GS %edx
.endif
@@ -324,8 +343,8 @@
.endif
.endm
-.macro SAVE_ALL_NMI cr3_reg:req
- SAVE_ALL
+.macro SAVE_ALL_NMI cr3_reg:req unwind_espfix=0
+ SAVE_ALL unwind_espfix=\unwind_espfix
BUG_IF_WRONG_CR3
@@ -357,6 +376,7 @@
2: popl %es
3: popl %fs
POP_GS \pop
+ IRET_FRAME
.pushsection .fixup, "ax"
4: movl $0, (%esp)
jmp 1b
@@ -395,7 +415,8 @@
.macro CHECK_AND_APPLY_ESPFIX
#ifdef CONFIG_X86_ESPFIX32
-#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8)
+#define GDT_ESPFIX_OFFSET (GDT_ENTRY_ESPFIX_SS * 8)
+#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + GDT_ESPFIX_OFFSET
ALTERNATIVE "jmp .Lend_\@", "", X86_BUG_ESPFIX
@@ -1075,7 +1096,6 @@ restore_all:
/* Restore user state */
RESTORE_REGS pop=4 # skip orig_eax/error_code
.Lirq_return:
- IRET_FRAME
/*
* ARCH_HAS_MEMBARRIER_SYNC_CORE rely on IRET core serialization
* when returning from IPI handler and when returning from
@@ -1128,30 +1148,43 @@ ENDPROC(entry_INT80_32)
* We can't call C functions using the ESPFIX stack. This code reads
* the high word of the segment base from the GDT and swiches to the
* normal stack and adjusts ESP with the matching offset.
+ *
+ * We might be on user CR3 here, so percpu data is not mapped and we can't
+ * access the GDT through the percpu segment. Instead, use SGDT to find
+ * the cpu_entry_area alias of the GDT.
*/
#ifdef CONFIG_X86_ESPFIX32
/* fixup the stack */
- mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */
- mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
+ pushl %ecx
+ subl $2*4, %esp
+ sgdt (%esp)
+ movl 2(%esp), %ecx /* GDT address */
+ /*
+ * Careful: ECX is a linear pointer, so we need to force base
+ * zero. %cs is the only known-linear segment we have right now.
+ */
+ mov %cs:GDT_ESPFIX_OFFSET + 4(%ecx), %al /* bits 16..23 */
+ mov %cs:GDT_ESPFIX_OFFSET + 7(%ecx), %ah /* bits 24..31 */
shl $16, %eax
+ addl $2*4, %esp
+ popl %ecx
addl %esp, %eax /* the adjusted stack pointer */
pushl $__KERNEL_DS
pushl %eax
lss (%esp), %esp /* switch to the normal stack segment */
#endif
.endm
+
.macro UNWIND_ESPFIX_STACK
+ /* It's safe to clobber %eax, all other regs need to be preserved */
#ifdef CONFIG_X86_ESPFIX32
movl %ss, %eax
/* see if on espfix stack */
cmpw $__ESPFIX_SS, %ax
- jne 27f
- movl $__KERNEL_DS, %eax
- movl %eax, %ds
- movl %eax, %es
+ jne .Lno_fixup_\@
/* switch to normal stack */
FIXUP_ESPFIX_STACK
-27:
+.Lno_fixup_\@:
#endif
.endm
@@ -1341,11 +1374,6 @@ END(spurious_interrupt_bug)
#ifdef CONFIG_XEN_PV
ENTRY(xen_hypervisor_callback)
- pushl $-1 /* orig_ax = -1 => not a system call */
- SAVE_ALL
- ENCODE_FRAME_POINTER
- TRACE_IRQS_OFF
-
/*
* Check to see if we got the event in the critical
* region in xen_iret_direct, after we've reenabled
@@ -1353,16 +1381,17 @@ ENTRY(xen_hypervisor_callback)
* iret instruction's behaviour where it delivers a
* pending interrupt when enabling interrupts:
*/
- movl PT_EIP(%esp), %eax
- cmpl $xen_iret_start_crit, %eax
+ cmpl $xen_iret_start_crit, (%esp)
jb 1f
- cmpl $xen_iret_end_crit, %eax
+ cmpl $xen_iret_end_crit, (%esp)
jae 1f
-
- jmp xen_iret_crit_fixup
-
-ENTRY(xen_do_upcall)
-1: mov %esp, %eax
+ call xen_iret_crit_fixup
+1:
+ pushl $-1 /* orig_ax = -1 => not a system call */
+ SAVE_ALL
+ ENCODE_FRAME_POINTER
+ TRACE_IRQS_OFF
+ mov %esp, %eax
call xen_evtchn_do_upcall
#ifndef CONFIG_PREEMPTION
call xen_maybe_preempt_hcall
@@ -1449,10 +1478,9 @@ END(page_fault)
common_exception_read_cr2:
/* the function address is in %gs's slot on the stack */
- SAVE_ALL switch_stacks=1 skip_gs=1
+ SAVE_ALL switch_stacks=1 skip_gs=1 unwind_espfix=1
ENCODE_FRAME_POINTER
- UNWIND_ESPFIX_STACK
/* fixup %gs */
GS_TO_REG %ecx
@@ -1474,9 +1502,8 @@ END(common_exception_read_cr2)
common_exception:
/* the function address is in %gs's slot on the stack */
- SAVE_ALL switch_stacks=1 skip_gs=1
+ SAVE_ALL switch_stacks=1 skip_gs=1 unwind_espfix=1
ENCODE_FRAME_POINTER
- UNWIND_ESPFIX_STACK
/* fixup %gs */
GS_TO_REG %ecx
@@ -1515,6 +1542,10 @@ ENTRY(nmi)
ASM_CLAC
#ifdef CONFIG_X86_ESPFIX32
+ /*
+ * ESPFIX_SS is only ever set on the return to user path
+ * after we've switched to the entry stack.
+ */
pushl %eax
movl %ss, %eax
cmpw $__ESPFIX_SS, %ax
@@ -1550,6 +1581,11 @@ ENTRY(nmi)
movl %ebx, %esp
.Lnmi_return:
+#ifdef CONFIG_X86_ESPFIX32
+ testl $CS_FROM_ESPFIX, PT_CS(%esp)
+ jnz .Lnmi_from_espfix
+#endif
+
CHECK_AND_APPLY_ESPFIX
RESTORE_ALL_NMI cr3_reg=%edi pop=4
jmp .Lirq_return
@@ -1557,23 +1593,42 @@ ENTRY(nmi)
#ifdef CONFIG_X86_ESPFIX32
.Lnmi_espfix_stack:
/*
- * create the pointer to lss back
+ * Create the pointer to LSS back
*/
pushl %ss
pushl %esp
addl $4, (%esp)
- /* copy the iret frame of 12 bytes */
- .rept 3
- pushl 16(%esp)
- .endr
- pushl %eax
- SAVE_ALL_NMI cr3_reg=%edi
+
+ /* Copy the (short) IRET frame */
+ pushl 4*4(%esp) # flags
+ pushl 4*4(%esp) # cs
+ pushl 4*4(%esp) # ip
+
+ pushl %eax # orig_ax
+
+ SAVE_ALL_NMI cr3_reg=%edi unwind_espfix=1
ENCODE_FRAME_POINTER
- FIXUP_ESPFIX_STACK # %eax == %esp
+
+ /* clear CS_FROM_KERNEL, set CS_FROM_ESPFIX */
+ xorl $(CS_FROM_ESPFIX | CS_FROM_KERNEL), PT_CS(%esp)
+
xorl %edx, %edx # zero error code
- call do_nmi
+ movl %esp, %eax # pt_regs pointer
+ jmp .Lnmi_from_sysenter_stack
+
+.Lnmi_from_espfix:
RESTORE_ALL_NMI cr3_reg=%edi
- lss 12+4(%esp), %esp # back to espfix stack
+ /*
+ * Because we cleared CS_FROM_KERNEL, IRET_FRAME 'forgot' to
+ * fix up the gap and long frame:
+ *
+ * 3 - original frame (exception)
+ * 2 - ESPFIX block (above)
+ * 6 - gap (FIXUP_FRAME)
+ * 5 - long frame (FIXUP_FRAME)
+ * 1 - orig_ax
+ */
+ lss (1+5+6)*4(%esp), %esp # back to espfix stack
jmp .Lirq_return
#endif
END(nmi)
diff --git a/arch/x86/include/asm/cpu_entry_area.h b/arch/x86/include/asm/cpu_entry_area.h
index 8348f7d69fd5..ea866c7bf31d 100644
--- a/arch/x86/include/asm/cpu_entry_area.h
+++ b/arch/x86/include/asm/cpu_entry_area.h
@@ -78,8 +78,12 @@ struct cpu_entry_area {
/*
* The GDT is just below entry_stack and thus serves (on x86_64) as
- * a a read-only guard page.
+ * a read-only guard page. On 32-bit the GDT must be writeable, so
+ * it needs an extra guard page.
*/
+#ifdef CONFIG_X86_32
+ char guard_entry_stack[PAGE_SIZE];
+#endif
struct entry_stack_page entry_stack_page;
/*
@@ -94,7 +98,6 @@ struct cpu_entry_area {
*/
struct cea_exception_stacks estacks;
#endif
-#ifdef CONFIG_CPU_SUP_INTEL
/*
* Per CPU debug store for Intel performance monitoring. Wastes a
* full page at the moment.
@@ -105,11 +108,13 @@ struct cpu_entry_area {
* Reserve enough fixmap PTEs.
*/
struct debug_store_buffers cpu_debug_buffers;
-#endif
};
-#define CPU_ENTRY_AREA_SIZE (sizeof(struct cpu_entry_area))
-#define CPU_ENTRY_AREA_TOT_SIZE (CPU_ENTRY_AREA_SIZE * NR_CPUS)
+#define CPU_ENTRY_AREA_SIZE (sizeof(struct cpu_entry_area))
+#define CPU_ENTRY_AREA_ARRAY_SIZE (CPU_ENTRY_AREA_SIZE * NR_CPUS)
+
+/* Total size includes the readonly IDT mapping page as well: */
+#define CPU_ENTRY_AREA_TOTAL_SIZE (CPU_ENTRY_AREA_ARRAY_SIZE + PAGE_SIZE)
DECLARE_PER_CPU(struct cpu_entry_area *, cpu_entry_area);
DECLARE_PER_CPU(struct cea_exception_stacks *, cea_exception_stacks);
@@ -117,13 +122,14 @@ DECLARE_PER_CPU(struct cea_exception_stacks *, cea_exception_stacks);
extern void setup_cpu_entry_areas(void);
extern void cea_set_pte(void *cea_vaddr, phys_addr_t pa, pgprot_t flags);
+/* Single page reserved for the readonly IDT mapping: */
#define CPU_ENTRY_AREA_RO_IDT CPU_ENTRY_AREA_BASE
#define CPU_ENTRY_AREA_PER_CPU (CPU_ENTRY_AREA_RO_IDT + PAGE_SIZE)
#define CPU_ENTRY_AREA_RO_IDT_VADDR ((void *)CPU_ENTRY_AREA_RO_IDT)
#define CPU_ENTRY_AREA_MAP_SIZE \
- (CPU_ENTRY_AREA_PER_CPU + CPU_ENTRY_AREA_TOT_SIZE - CPU_ENTRY_AREA_BASE)
+ (CPU_ENTRY_AREA_PER_CPU + CPU_ENTRY_AREA_ARRAY_SIZE - CPU_ENTRY_AREA_BASE)
extern struct cpu_entry_area *get_cpu_entry_area(int cpu);
diff --git a/arch/x86/include/asm/pgtable_32_types.h b/arch/x86/include/asm/pgtable_32_types.h
index b0bc0fff5f1f..1636eb8e5a5b 100644
--- a/arch/x86/include/asm/pgtable_32_types.h
+++ b/arch/x86/include/asm/pgtable_32_types.h
@@ -44,11 +44,11 @@ extern bool __vmalloc_start_set; /* set once high_memory is set */
* Define this here and validate with BUILD_BUG_ON() in pgtable_32.c
* to avoid include recursion hell
*/
-#define CPU_ENTRY_AREA_PAGES (NR_CPUS * 40)
+#define CPU_ENTRY_AREA_PAGES (NR_CPUS * 39)
-#define CPU_ENTRY_AREA_BASE \
- ((FIXADDR_TOT_START - PAGE_SIZE * (CPU_ENTRY_AREA_PAGES + 1)) \
- & PMD_MASK)
+/* The +1 is for the readonly IDT page: */
+#define CPU_ENTRY_AREA_BASE \
+ ((FIXADDR_TOT_START - PAGE_SIZE*(CPU_ENTRY_AREA_PAGES+1)) & PMD_MASK)
#define LDT_BASE_ADDR \
((CPU_ENTRY_AREA_BASE - PAGE_SIZE) & PMD_MASK)
diff --git a/arch/x86/include/asm/segment.h b/arch/x86/include/asm/segment.h
index ac3892920419..6669164abadc 100644
--- a/arch/x86/include/asm/segment.h
+++ b/arch/x86/include/asm/segment.h
@@ -31,6 +31,18 @@
*/
#define SEGMENT_RPL_MASK 0x3
+/*
+ * When running on Xen PV, the actual privilege level of the kernel is 1,
+ * not 0. Testing the Requested Privilege Level in a segment selector to
+ * determine whether the context is user mode or kernel mode with
+ * SEGMENT_RPL_MASK is wrong because the PV kernel's privilege level
+ * matches the 0x3 mask.
+ *
+ * Testing with USER_SEGMENT_RPL_MASK is valid for both native and Xen PV
+ * kernels because privilege level 2 is never used.
+ */
+#define USER_SEGMENT_RPL_MASK 0x2
+
/* User mode is privilege level 3: */
#define USER_RPL 0x3
diff --git a/arch/x86/kernel/doublefault.c b/arch/x86/kernel/doublefault.c
index 0b8cedb20d6d..d5c9b13bafdf 100644
--- a/arch/x86/kernel/doublefault.c
+++ b/arch/x86/kernel/doublefault.c
@@ -65,6 +65,9 @@ struct x86_hw_tss doublefault_tss __cacheline_aligned = {
.ss = __KERNEL_DS,
.ds = __USER_DS,
.fs = __KERNEL_PERCPU,
+#ifndef CONFIG_X86_32_LAZY_GS
+ .gs = __KERNEL_STACK_CANARY,
+#endif
.__cr3 = __pa_nodebug(swapper_pg_dir),
};
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 30f9cb2c0b55..2e6a0676c1f4 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -571,6 +571,16 @@ ENTRY(initial_page_table)
# error "Kernel PMDs should be 1, 2 or 3"
# endif
.align PAGE_SIZE /* needs to be page-sized too */
+
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+ /*
+ * PTI needs another page so sync_initial_pagetable() works correctly
+ * and does not scribble over the data which is placed behind the
+ * actual initial_page_table. See clone_pgd_range().
+ */
+ .fill 1024, 4, 0
+#endif
+
#endif
.data
diff --git a/arch/x86/mm/cpu_entry_area.c b/arch/x86/mm/cpu_entry_area.c
index 752ad11d6868..d9643647a9ce 100644
--- a/arch/x86/mm/cpu_entry_area.c
+++ b/arch/x86/mm/cpu_entry_area.c
@@ -178,7 +178,9 @@ static __init void setup_cpu_entry_area_ptes(void)
#ifdef CONFIG_X86_32
unsigned long start, end;
- BUILD_BUG_ON(CPU_ENTRY_AREA_PAGES * PAGE_SIZE < CPU_ENTRY_AREA_MAP_SIZE);
+ /* The +1 is for the readonly IDT: */
+ BUILD_BUG_ON((CPU_ENTRY_AREA_PAGES+1)*PAGE_SIZE != CPU_ENTRY_AREA_MAP_SIZE);
+ BUILD_BUG_ON(CPU_ENTRY_AREA_TOTAL_SIZE != CPU_ENTRY_AREA_MAP_SIZE);
BUG_ON(CPU_ENTRY_AREA_BASE & ~PMD_MASK);
start = CPU_ENTRY_AREA_BASE;
diff --git a/arch/x86/xen/xen-asm_32.S b/arch/x86/xen/xen-asm_32.S
index c15db060a242..cd177772fe4d 100644
--- a/arch/x86/xen/xen-asm_32.S
+++ b/arch/x86/xen/xen-asm_32.S
@@ -126,10 +126,9 @@ hyper_iret:
.globl xen_iret_start_crit, xen_iret_end_crit
/*
- * This is called by xen_hypervisor_callback in entry.S when it sees
+ * This is called by xen_hypervisor_callback in entry_32.S when it sees
* that the EIP at the time of interrupt was between
- * xen_iret_start_crit and xen_iret_end_crit. We're passed the EIP in
- * %eax so we can do a more refined determination of what to do.
+ * xen_iret_start_crit and xen_iret_end_crit.
*
* The stack format at this point is:
* ----------------
@@ -138,70 +137,46 @@ hyper_iret:
* eflags } outer exception info
* cs }
* eip }
- * ---------------- <- edi (copy dest)
- * eax : outer eax if it hasn't been restored
* ----------------
- * eflags } nested exception info
- * cs } (no ss/esp because we're nested
- * eip } from the same ring)
- * orig_eax }<- esi (copy src)
- * - - - - - - - -
- * fs }
- * es }
- * ds } SAVE_ALL state
- * eax }
- * : :
- * ebx }<- esp
+ * eax : outer eax if it hasn't been restored
* ----------------
+ * eflags }
+ * cs } nested exception info
+ * eip }
+ * return address : (into xen_hypervisor_callback)
*
- * In order to deliver the nested exception properly, we need to shift
- * everything from the return addr up to the error code so it sits
- * just under the outer exception info. This means that when we
- * handle the exception, we do it in the context of the outer
- * exception rather than starting a new one.
+ * In order to deliver the nested exception properly, we need to discard the
+ * nested exception frame such that when we handle the exception, we do it
+ * in the context of the outer exception rather than starting a new one.
*
- * The only caveat is that if the outer eax hasn't been restored yet
- * (ie, it's still on stack), we need to insert its value into the
- * SAVE_ALL state before going on, since it's usermode state which we
- * eventually need to restore.
+ * The only caveat is that if the outer eax hasn't been restored yet (i.e.
+ * it's still on stack), we need to restore its value here.
*/
ENTRY(xen_iret_crit_fixup)
/*
* Paranoia: Make sure we're really coming from kernel space.
* One could imagine a case where userspace jumps into the
* critical range address, but just before the CPU delivers a
- * GP, it decides to deliver an interrupt instead. Unlikely?
- * Definitely. Easy to avoid? Yes. The Intel documents
- * explicitly say that the reported EIP for a bad jump is the
- * jump instruction itself, not the destination, but some
- * virtual environments get this wrong.
+ * PF, it decides to deliver an interrupt instead. Unlikely?
+ * Definitely. Easy to avoid? Yes.
*/
- movl PT_CS(%esp), %ecx
- andl $SEGMENT_RPL_MASK, %ecx
- cmpl $USER_RPL, %ecx
- je 2f
-
- lea PT_ORIG_EAX(%esp), %esi
- lea PT_EFLAGS(%esp), %edi
+ testb $2, 2*4(%esp) /* nested CS */
+ jnz 2f
/*
* If eip is before iret_restore_end then stack
* hasn't been restored yet.
*/
- cmp $iret_restore_end, %eax
+ cmpl $iret_restore_end, 1*4(%esp)
jae 1f
- movl 0+4(%edi), %eax /* copy EAX (just above top of frame) */
- movl %eax, PT_EAX(%esp)
+ movl 4*4(%esp), %eax /* load outer EAX */
+ ret $4*4 /* discard nested EIP, CS, and EFLAGS as
+ * well as the just restored EAX */
- lea ESP_OFFSET(%edi), %edi /* move dest up over saved regs */
-
- /* set up the copy */
-1: std
- mov $PT_EIP / 4, %ecx /* saved regs up to orig_eax */
- rep movsl
- cld
-
- lea 4(%edi), %esp /* point esp to new frame */
-2: jmp xen_do_upcall
+1:
+ ret $3*4 /* discard nested EIP, CS, and EFLAGS */
+2:
+ ret
+END(xen_iret_crit_fixup)