x86/efi: Avoid triple faults during EFI mixed mode calls

Andy pointed out that if an NMI or MCE is received while we're in the
middle of an EFI mixed mode call a triple fault will occur. This can
happen, for example, when issuing an EFI mixed mode call while running
perf.

The reason for the triple fault is that we execute the mixed mode call
in 32-bit mode with paging disabled but with 64-bit kernel IDT handlers
installed throughout the call.

At Andy's suggestion, stop playing the games we currently do at runtime,
such as disabling paging and installing a 32-bit GDT for __KERNEL_CS. We
can simply switch to the __KERNEL32_CS descriptor before invoking
firmware services, and run in compatibility mode. This way, if an
NMI/MCE does occur the kernel IDT handler will execute correctly, since
it'll jump to __KERNEL_CS automatically.

However, this change is only possible post-ExitBootServices(). Before
then the firmware "owns" the machine and expects for its 32-bit IDT
handlers to be left intact to service interrupts, etc.

So, we now need to distinguish between early boot and runtime
invocations of EFI services. During early boot, we need to restore the
GDT that the firmware expects to be present. We can only jump to the
__KERNEL32_CS code segment for mixed mode calls after ExitBootServices()
has been invoked.

A liberal sprinkling of comments in the thunking code should make the
differences in early and late environments more apparent.

Reported-by: Andy Lutomirski <luto@amacapital.net>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

2 files changed, 104 insertions, 178 deletions

diff --git a/arch/x86/platform/efi/efi_stub_64.S b/arch/x86/platform/efi/efi_stub_64.S
index 5fcda7272550..86d0f9e08dd9 100644
--- a/arch/x86/platform/efi/efi_stub_64.S
+++ b/arch/x86/platform/efi/efi_stub_64.S
@@ -91,167 +91,6 @@ ENTRY(efi_call)
 	ret
 ENDPROC(efi_call)
 
-#ifdef CONFIG_EFI_MIXED
-
-/*
- * We run this function from the 1:1 mapping.
- *
- * This function must be invoked with a 1:1 mapped stack.
- */
-ENTRY(__efi64_thunk)
-	movl	%ds, %eax
-	push	%rax
-	movl	%es, %eax
-	push	%rax
-	movl	%ss, %eax
-	push	%rax
-
-	subq	$32, %rsp
-	movl	%esi, 0x0(%rsp)
-	movl	%edx, 0x4(%rsp)
-	movl	%ecx, 0x8(%rsp)
-	movq	%r8, %rsi
-	movl	%esi, 0xc(%rsp)
-	movq	%r9, %rsi
-	movl	%esi,  0x10(%rsp)
-
-	sgdt	save_gdt(%rip)
-
-	leaq	1f(%rip), %rbx
-	movq	%rbx, func_rt_ptr(%rip)
-
-	/* Switch to gdt with 32-bit segments */
-	movl	64(%rsp), %eax
-	lgdt	(%rax)
-
-	leaq	efi_enter32(%rip), %rax
-	pushq	$__KERNEL_CS
-	pushq	%rax
-	lretq
-
-1:	addq	$32, %rsp
-
-	lgdt	save_gdt(%rip)
-
-	pop	%rbx
-	movl	%ebx, %ss
-	pop	%rbx
-	movl	%ebx, %es
-	pop	%rbx
-	movl	%ebx, %ds
-
-	/*
-	 * Convert 32-bit status code into 64-bit.
-	 */
-	test	%rax, %rax
-	jz	1f
-	movl	%eax, %ecx
-	andl	$0x0fffffff, %ecx
-	andl	$0xf0000000, %eax
-	shl	$32, %rax
-	or	%rcx, %rax
-1:
-	ret
-ENDPROC(__efi64_thunk)
-
-ENTRY(efi_exit32)
-	movq	func_rt_ptr(%rip), %rax
-	push	%rax
-	mov	%rdi, %rax
-	ret
-ENDPROC(efi_exit32)
-
-	.code32
-/*
- * EFI service pointer must be in %edi.
- *
- * The stack should represent the 32-bit calling convention.
- */
-ENTRY(efi_enter32)
-	movl	$__KERNEL_DS, %eax
-	movl	%eax, %ds
-	movl	%eax, %es
-	movl	%eax, %ss
-
-	/* Reload pgtables */
-	movl	%cr3, %eax
-	movl	%eax, %cr3
-
-	/* Disable paging */
-	movl	%cr0, %eax
-	btrl	$X86_CR0_PG_BIT, %eax
-	movl	%eax, %cr0
-
-	/* Disable long mode via EFER */
-	movl	$MSR_EFER, %ecx
-	rdmsr
-	btrl	$_EFER_LME, %eax
-	wrmsr
-
-	call	*%edi
-
-	/* We must preserve return value */
-	movl	%eax, %edi
-
-	/*
-	 * Some firmware will return with interrupts enabled. Be sure to
-	 * disable them before we switch GDTs.
-	 */
-	cli
-
-	movl	68(%esp), %eax
-	movl	%eax, 2(%eax)
-	lgdtl	(%eax)
-
-	movl	%cr4, %eax
-	btsl	$(X86_CR4_PAE_BIT), %eax
-	movl	%eax, %cr4
-
-	movl	%cr3, %eax
-	movl	%eax, %cr3
-
-	movl	$MSR_EFER, %ecx
-	rdmsr
-	btsl	$_EFER_LME, %eax
-	wrmsr
-
-	xorl	%eax, %eax
-	lldt	%ax
-
-	movl	72(%esp), %eax
-	pushl	$__KERNEL_CS
-	pushl	%eax
-
-	/* Enable paging */
-	movl	%cr0, %eax
-	btsl	$X86_CR0_PG_BIT, %eax
-	movl	%eax, %cr0
-	lret
-ENDPROC(efi_enter32)
-
-	.data
-	.balign	8
-	.global	efi32_boot_gdt
-efi32_boot_gdt:	.word	0
-		.quad	0
-
-save_gdt:	.word	0
-		.quad	0
-func_rt_ptr:	.quad	0
-
-	.global efi_gdt64
-efi_gdt64:
-	.word	efi_gdt64_end - efi_gdt64
-	.long	0			/* Filled out by user */
-	.word	0
-	.quad	0x0000000000000000	/* NULL descriptor */
-	.quad	0x00af9a000000ffff	/* __KERNEL_CS */
-	.quad	0x00cf92000000ffff	/* __KERNEL_DS */
-	.quad	0x0080890000000000	/* TS descriptor */
-	.quad   0x0000000000000000	/* TS continued */
-efi_gdt64_end:
-#endif /* CONFIG_EFI_MIXED */
-
 	.data
 ENTRY(efi_scratch)
 	.fill 3,8,0
diff --git a/arch/x86/platform/efi/efi_thunk_64.S b/arch/x86/platform/efi/efi_thunk_64.S
index 8806fa73e6e6..ff85d28c50f2 100644
--- a/arch/x86/platform/efi/efi_thunk_64.S
+++ b/arch/x86/platform/efi/efi_thunk_64.S
@@ -1,9 +1,26 @@
 /*
  * Copyright (C) 2014 Intel Corporation; author Matt Fleming
+ *
+ * Support for invoking 32-bit EFI runtime services from a 64-bit
+ * kernel.
+ *
+ * The below thunking functions are only used after ExitBootServices()
+ * has been called. This simplifies things considerably as compared with
+ * the early EFI thunking because we can leave all the kernel state
+ * intact (GDT, IDT, etc) and simply invoke the the 32-bit EFI runtime
+ * services from __KERNEL32_CS. This means we can continue to service
+ * interrupts across an EFI mixed mode call.
+ *
+ * We do however, need to handle the fact that we're running in a full
+ * 64-bit virtual address space. Things like the stack and instruction
+ * addresses need to be accessible by the 32-bit firmware, so we rely on
+ * using the identity mappings in the EFI page table to access the stack
+ * and kernel text (see efi_setup_page_tables()).
  */
 
 #include <linux/linkage.h>
 #include <asm/page_types.h>
+#include <asm/segment.h>
 
 	.text
 	.code64
@@ -33,14 +50,6 @@ ENTRY(efi64_thunk)
 	leaq	efi_exit32(%rip), %rbx
 	subq	%rax, %rbx
 	movl	%ebx, 8(%rsp)
-	leaq	efi_gdt64(%rip), %rbx
-	subq	%rax, %rbx
-	movl	%ebx, 2(%ebx)
-	movl	%ebx, 4(%rsp)
-	leaq	efi_gdt32(%rip), %rbx
-	subq	%rax, %rbx
-	movl	%ebx, 2(%ebx)
-	movl	%ebx, (%rsp)
 
 	leaq	__efi64_thunk(%rip), %rbx
 	subq	%rax, %rbx
@@ -52,14 +61,92 @@ ENTRY(efi64_thunk)
 	retq
 ENDPROC(efi64_thunk)
 
-	.data
-efi_gdt32:
-	.word 	efi_gdt32_end - efi_gdt32
-	.long	0			/* Filled out above */
-	.word	0
-	.quad	0x0000000000000000	/* NULL descriptor */
-	.quad	0x00cf9a000000ffff	/* __KERNEL_CS */
-	.quad	0x00cf93000000ffff	/* __KERNEL_DS */
-efi_gdt32_end:
+/*
+ * We run this function from the 1:1 mapping.
+ *
+ * This function must be invoked with a 1:1 mapped stack.
+ */
+ENTRY(__efi64_thunk)
+	movl	%ds, %eax
+	push	%rax
+	movl	%es, %eax
+	push	%rax
+	movl	%ss, %eax
+	push	%rax
+
+	subq	$32, %rsp
+	movl	%esi, 0x0(%rsp)
+	movl	%edx, 0x4(%rsp)
+	movl	%ecx, 0x8(%rsp)
+	movq	%r8, %rsi
+	movl	%esi, 0xc(%rsp)
+	movq	%r9, %rsi
+	movl	%esi,  0x10(%rsp)
+
+	leaq	1f(%rip), %rbx
+	movq	%rbx, func_rt_ptr(%rip)
+
+	/* Switch to 32-bit descriptor */
+	pushq	$__KERNEL32_CS
+	leaq	efi_enter32(%rip), %rax
+	pushq	%rax
+	lretq
+
+1:	addq	$32, %rsp
+
+	pop	%rbx
+	movl	%ebx, %ss
+	pop	%rbx
+	movl	%ebx, %es
+	pop	%rbx
+	movl	%ebx, %ds
 
+	/*
+	 * Convert 32-bit status code into 64-bit.
+	 */
+	test	%rax, %rax
+	jz	1f
+	movl	%eax, %ecx
+	andl	$0x0fffffff, %ecx
+	andl	$0xf0000000, %eax
+	shl	$32, %rax
+	or	%rcx, %rax
+1:
+	ret
+ENDPROC(__efi64_thunk)
+
+ENTRY(efi_exit32)
+	movq	func_rt_ptr(%rip), %rax
+	push	%rax
+	mov	%rdi, %rax
+	ret
+ENDPROC(efi_exit32)
+
+	.code32
+/*
+ * EFI service pointer must be in %edi.
+ *
+ * The stack should represent the 32-bit calling convention.
+ */
+ENTRY(efi_enter32)
+	movl	$__KERNEL_DS, %eax
+	movl	%eax, %ds
+	movl	%eax, %es
+	movl	%eax, %ss
+
+	call	*%edi
+
+	/* We must preserve return value */
+	movl	%eax, %edi
+
+	movl	72(%esp), %eax
+	pushl	$__KERNEL_CS
+	pushl	%eax
+
+	lret
+ENDPROC(efi_enter32)
+
+	.data
+	.balign	8
+func_rt_ptr:		.quad 0
 efi_saved_sp:		.quad 0