diff options
author | Borislav Petkov <bp@suse.de> | 2014-06-24 13:25:04 +0200 |
---|---|---|
committer | H. Peter Anvin <hpa@linux.intel.com> | 2014-07-14 12:21:40 -0700 |
commit | 26bfa5f89486a8926cd4d4ca81a04d3f0f174934 (patch) | |
tree | 5a51e1be2db950be44ffb3fb05f2df00811bda0f /arch/x86/kernel | |
parent | 80a208bd3948aceddf0429bd9f9b4cd858d526df (diff) | |
download | linux-26bfa5f89486a8926cd4d4ca81a04d3f0f174934.tar.bz2 |
x86, amd: Cleanup init_amd
Distribute family-specific code to corresponding functions.
Also,
* move the direct mapping splitting around the TSEG SMM area to
bsp_init_amd().
* kill ancient comment about what we should do for K5.
* merge amd_k7_smp_check() into its only caller init_amd_k7 and drop
cpu_has_mp macro.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1403609105-8332-3-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Diffstat (limited to 'arch/x86/kernel')
-rw-r--r-- | arch/x86/kernel/cpu/amd.c | 339 |
1 files changed, 161 insertions, 178 deletions
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 8714a78414bf..bc360d3df60e 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -8,6 +8,7 @@ #include <asm/processor.h> #include <asm/apic.h> #include <asm/cpu.h> +#include <asm/smp.h> #include <asm/pci-direct.h> #ifdef CONFIG_X86_64 @@ -50,7 +51,6 @@ static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val) return wrmsr_safe_regs(gprs); } -#ifdef CONFIG_X86_32 /* * B step AMD K6 before B 9730xxxx have hardware bugs that can cause * misexecution of code under Linux. Owners of such processors should @@ -70,6 +70,7 @@ __asm__(".globl vide\n\t.align 4\nvide: ret"); static void init_amd_k5(struct cpuinfo_x86 *c) { +#ifdef CONFIG_X86_32 /* * General Systems BIOSen alias the cpu frequency registers * of the Elan at 0x000df000. Unfortuantly, one of the Linux @@ -83,11 +84,12 @@ static void init_amd_k5(struct cpuinfo_x86 *c) if (inl(CBAR) & CBAR_ENB) outl(0 | CBAR_KEY, CBAR); } +#endif } - static void init_amd_k6(struct cpuinfo_x86 *c) { +#ifdef CONFIG_X86_32 u32 l, h; int mbytes = get_num_physpages() >> (20-PAGE_SHIFT); @@ -176,10 +178,44 @@ static void init_amd_k6(struct cpuinfo_x86 *c) /* placeholder for any needed mods */ return; } +#endif } -static void amd_k7_smp_check(struct cpuinfo_x86 *c) +static void init_amd_k7(struct cpuinfo_x86 *c) { +#ifdef CONFIG_X86_32 + u32 l, h; + + /* + * Bit 15 of Athlon specific MSR 15, needs to be 0 + * to enable SSE on Palomino/Morgan/Barton CPU's. + * If the BIOS didn't enable it already, enable it here. + */ + if (c->x86_model >= 6 && c->x86_model <= 10) { + if (!cpu_has(c, X86_FEATURE_XMM)) { + printk(KERN_INFO "Enabling disabled K7/SSE Support.\n"); + msr_clear_bit(MSR_K7_HWCR, 15); + set_cpu_cap(c, X86_FEATURE_XMM); + } + } + + /* + * It's been determined by AMD that Athlons since model 8 stepping 1 + * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx + * As per AMD technical note 27212 0.2 + */ + if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) { + rdmsr(MSR_K7_CLK_CTL, l, h); + if ((l & 0xfff00000) != 0x20000000) { + printk(KERN_INFO + "CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", + l, ((l & 0x000fffff)|0x20000000)); + wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h); + } + } + + set_cpu_cap(c, X86_FEATURE_K7); + /* calling is from identify_secondary_cpu() ? */ if (!c->cpu_index) return; @@ -207,7 +243,7 @@ static void amd_k7_smp_check(struct cpuinfo_x86 *c) if (((c->x86_model == 6) && (c->x86_mask >= 2)) || ((c->x86_model == 7) && (c->x86_mask >= 1)) || (c->x86_model > 7)) - if (cpu_has_mp) + if (cpu_has(c, X86_FEATURE_MP)) return; /* If we get here, not a certified SMP capable AMD system. */ @@ -219,45 +255,8 @@ static void amd_k7_smp_check(struct cpuinfo_x86 *c) WARN_ONCE(1, "WARNING: This combination of AMD" " processors is not suitable for SMP.\n"); add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_NOW_UNRELIABLE); -} - -static void init_amd_k7(struct cpuinfo_x86 *c) -{ - u32 l, h; - - /* - * Bit 15 of Athlon specific MSR 15, needs to be 0 - * to enable SSE on Palomino/Morgan/Barton CPU's. - * If the BIOS didn't enable it already, enable it here. - */ - if (c->x86_model >= 6 && c->x86_model <= 10) { - if (!cpu_has(c, X86_FEATURE_XMM)) { - printk(KERN_INFO "Enabling disabled K7/SSE Support.\n"); - msr_clear_bit(MSR_K7_HWCR, 15); - set_cpu_cap(c, X86_FEATURE_XMM); - } - } - - /* - * It's been determined by AMD that Athlons since model 8 stepping 1 - * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx - * As per AMD technical note 27212 0.2 - */ - if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) { - rdmsr(MSR_K7_CLK_CTL, l, h); - if ((l & 0xfff00000) != 0x20000000) { - printk(KERN_INFO - "CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", - l, ((l & 0x000fffff)|0x20000000)); - wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h); - } - } - - set_cpu_cap(c, X86_FEATURE_K7); - - amd_k7_smp_check(c); -} #endif +} #ifdef CONFIG_NUMA /* @@ -446,6 +445,26 @@ static void early_init_amd_mc(struct cpuinfo_x86 *c) static void bsp_init_amd(struct cpuinfo_x86 *c) { + +#ifdef CONFIG_X86_64 + if (c->x86 >= 0xf) { + unsigned long long tseg; + + /* + * Split up direct mapping around the TSEG SMM area. + * Don't do it for gbpages because there seems very little + * benefit in doing so. + */ + if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) { + unsigned long pfn = tseg >> PAGE_SHIFT; + + printk(KERN_DEBUG "tseg: %010llx\n", tseg); + if (pfn_range_is_mapped(pfn, pfn + 1)) + set_memory_4k((unsigned long)__va(tseg), 1); + } + } +#endif + if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) { if (c->x86 > 0x10 || @@ -515,10 +534,100 @@ static const int amd_erratum_383[]; static const int amd_erratum_400[]; static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum); +static void init_amd_k8(struct cpuinfo_x86 *c) +{ + u32 level; + u64 value; + + /* On C+ stepping K8 rep microcode works well for copy/memset */ + level = cpuid_eax(1); + if ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + + /* + * Some BIOSes incorrectly force this feature, but only K8 revision D + * (model = 0x14) and later actually support it. + * (AMD Erratum #110, docId: 25759). + */ + if (c->x86_model < 0x14 && cpu_has(c, X86_FEATURE_LAHF_LM)) { + clear_cpu_cap(c, X86_FEATURE_LAHF_LM); + if (!rdmsrl_amd_safe(0xc001100d, &value)) { + value &= ~BIT_64(32); + wrmsrl_amd_safe(0xc001100d, value); + } + } + + if (!c->x86_model_id[0]) + strcpy(c->x86_model_id, "Hammer"); +} + +static void init_amd_gh(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_X86_64 + /* do this for boot cpu */ + if (c == &boot_cpu_data) + check_enable_amd_mmconf_dmi(); + + fam10h_check_enable_mmcfg(); +#endif + + /* + * Disable GART TLB Walk Errors on Fam10h. We do this here because this + * is always needed when GART is enabled, even in a kernel which has no + * MCE support built in. BIOS should disable GartTlbWlk Errors already. + * If it doesn't, we do it here as suggested by the BKDG. + * + * Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33012 + */ + msr_set_bit(MSR_AMD64_MCx_MASK(4), 10); + + /* + * On family 10h BIOS may not have properly enabled WC+ support, causing + * it to be converted to CD memtype. This may result in performance + * degradation for certain nested-paging guests. Prevent this conversion + * by clearing bit 24 in MSR_AMD64_BU_CFG2. + * + * NOTE: we want to use the _safe accessors so as not to #GP kvm + * guests on older kvm hosts. + */ + msr_clear_bit(MSR_AMD64_BU_CFG2, 24); + + if (cpu_has_amd_erratum(c, amd_erratum_383)) + set_cpu_bug(c, X86_BUG_AMD_TLB_MMATCH); +} + +static void init_amd_bd(struct cpuinfo_x86 *c) +{ + u64 value; + + /* re-enable TopologyExtensions if switched off by BIOS */ + if ((c->x86_model >= 0x10) && (c->x86_model <= 0x1f) && + !cpu_has(c, X86_FEATURE_TOPOEXT)) { + + if (msr_set_bit(0xc0011005, 54) > 0) { + rdmsrl(0xc0011005, value); + if (value & BIT_64(54)) { + set_cpu_cap(c, X86_FEATURE_TOPOEXT); + pr_info(FW_INFO "CPU: Re-enabling disabled Topology Extensions Support.\n"); + } + } + } + + /* + * The way access filter has a performance penalty on some workloads. + * Disable it on the affected CPUs. + */ + if ((c->x86_model >= 0x02) && (c->x86_model < 0x20)) { + if (!rdmsrl_safe(0xc0011021, &value) && !(value & 0x1E)) { + value |= 0x1E; + wrmsrl_safe(0xc0011021, value); + } + } +} + static void init_amd(struct cpuinfo_x86 *c) { u32 dummy; - unsigned long long value; #ifdef CONFIG_SMP /* @@ -540,100 +649,29 @@ static void init_amd(struct cpuinfo_x86 *c) */ clear_cpu_cap(c, 0*32+31); -#ifdef CONFIG_X86_64 - /* On C+ stepping K8 rep microcode works well for copy/memset */ - if (c->x86 == 0xf) { - u32 level; - - level = cpuid_eax(1); - if ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - - /* - * Some BIOSes incorrectly force this feature, but only K8 - * revision D (model = 0x14) and later actually support it. - * (AMD Erratum #110, docId: 25759). - */ - if (c->x86_model < 0x14 && cpu_has(c, X86_FEATURE_LAHF_LM)) { - clear_cpu_cap(c, X86_FEATURE_LAHF_LM); - if (!rdmsrl_amd_safe(0xc001100d, &value)) { - value &= ~(1ULL << 32); - wrmsrl_amd_safe(0xc001100d, value); - } - } - - } if (c->x86 >= 0x10) set_cpu_cap(c, X86_FEATURE_REP_GOOD); /* get apicid instead of initial apic id from cpuid */ c->apicid = hard_smp_processor_id(); -#else - - /* - * FIXME: We should handle the K5 here. Set up the write - * range and also turn on MSR 83 bits 4 and 31 (write alloc, - * no bus pipeline) - */ - - switch (c->x86) { - case 4: - init_amd_k5(c); - break; - case 5: - init_amd_k6(c); - break; - case 6: /* An Athlon/Duron */ - init_amd_k7(c); - break; - } /* K6s reports MCEs but don't actually have all the MSRs */ if (c->x86 < 6) clear_cpu_cap(c, X86_FEATURE_MCE); -#endif + + switch (c->x86) { + case 4: init_amd_k5(c); break; + case 5: init_amd_k6(c); break; + case 6: init_amd_k7(c); break; + case 0xf: init_amd_k8(c); break; + case 0x10: init_amd_gh(c); break; + case 0x15: init_amd_bd(c); break; + } /* Enable workaround for FXSAVE leak */ if (c->x86 >= 6) set_cpu_bug(c, X86_BUG_FXSAVE_LEAK); - if (!c->x86_model_id[0]) { - switch (c->x86) { - case 0xf: - /* Should distinguish Models here, but this is only - a fallback anyways. */ - strcpy(c->x86_model_id, "Hammer"); - break; - } - } - - /* re-enable TopologyExtensions if switched off by BIOS */ - if ((c->x86 == 0x15) && - (c->x86_model >= 0x10) && (c->x86_model <= 0x1f) && - !cpu_has(c, X86_FEATURE_TOPOEXT)) { - - if (msr_set_bit(0xc0011005, 54) > 0) { - rdmsrl(0xc0011005, value); - if (value & BIT_64(54)) { - set_cpu_cap(c, X86_FEATURE_TOPOEXT); - pr_info(FW_INFO "CPU: Re-enabling disabled Topology Extensions Support.\n"); - } - } - } - - /* - * The way access filter has a performance penalty on some workloads. - * Disable it on the affected CPUs. - */ - if ((c->x86 == 0x15) && - (c->x86_model >= 0x02) && (c->x86_model < 0x20)) { - - if (!rdmsrl_safe(0xc0011021, &value) && !(value & 0x1E)) { - value |= 0x1E; - wrmsrl_safe(0xc0011021, value); - } - } - cpu_detect_cache_sizes(c); /* Multi core CPU? */ @@ -656,33 +694,6 @@ static void init_amd(struct cpuinfo_x86 *c) set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); } -#ifdef CONFIG_X86_64 - if (c->x86 == 0x10) { - /* do this for boot cpu */ - if (c == &boot_cpu_data) - check_enable_amd_mmconf_dmi(); - - fam10h_check_enable_mmcfg(); - } - - if (c == &boot_cpu_data && c->x86 >= 0xf) { - unsigned long long tseg; - - /* - * Split up direct mapping around the TSEG SMM area. - * Don't do it for gbpages because there seems very little - * benefit in doing so. - */ - if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) { - unsigned long pfn = tseg >> PAGE_SHIFT; - - printk(KERN_DEBUG "tseg: %010llx\n", tseg); - if (pfn_range_is_mapped(pfn, pfn + 1)) - set_memory_4k((unsigned long)__va(tseg), 1); - } - } -#endif - /* * Family 0x12 and above processors have APIC timer * running in deep C states. @@ -690,34 +701,6 @@ static void init_amd(struct cpuinfo_x86 *c) if (c->x86 > 0x11) set_cpu_cap(c, X86_FEATURE_ARAT); - if (c->x86 == 0x10) { - /* - * Disable GART TLB Walk Errors on Fam10h. We do this here - * because this is always needed when GART is enabled, even in a - * kernel which has no MCE support built in. - * BIOS should disable GartTlbWlk Errors already. If - * it doesn't, do it here as suggested by the BKDG. - * - * Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33012 - */ - msr_set_bit(MSR_AMD64_MCx_MASK(4), 10); - - /* - * On family 10h BIOS may not have properly enabled WC+ support, - * causing it to be converted to CD memtype. This may result in - * performance degradation for certain nested-paging guests. - * Prevent this conversion by clearing bit 24 in - * MSR_AMD64_BU_CFG2. - * - * NOTE: we want to use the _safe accessors so as not to #GP kvm - * guests on older kvm hosts. - */ - msr_clear_bit(MSR_AMD64_BU_CFG2, 24); - - if (cpu_has_amd_erratum(c, amd_erratum_383)) - set_cpu_bug(c, X86_BUG_AMD_TLB_MMATCH); - } - if (cpu_has_amd_erratum(c, amd_erratum_400)) set_cpu_bug(c, X86_BUG_AMD_APIC_C1E); |