i386: move kernel

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 213 insertions, 0 deletions

diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S
new file mode 100644
index 000000000000..7d72cce00529
--- /dev/null
+++ b/arch/x86/kernel/vmlinux_32.lds.S
@@ -0,0 +1,213 @@
+/* ld script to make i386 Linux kernel
+ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
+ *
+ * Don't define absolute symbols until and unless you know that symbol
+ * value is should remain constant even if kernel image is relocated
+ * at run time. Absolute symbols are not relocated. If symbol value should
+ * change if kernel is relocated, make the symbol section relative and
+ * put it inside the section definition.
+ */
+
+/* Don't define absolute symbols until and unless you know that symbol
+ * value is should remain constant even if kernel image is relocated
+ * at run time. Absolute symbols are not relocated. If symbol value should
+ * change if kernel is relocated, make the symbol section relative and
+ * put it inside the section definition.
+ */
+#define LOAD_OFFSET __PAGE_OFFSET
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/boot.h>
+
+OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
+OUTPUT_ARCH(i386)
+ENTRY(phys_startup_32)
+jiffies = jiffies_64;
+
+PHDRS {
+	text PT_LOAD FLAGS(5);	/* R_E */
+	data PT_LOAD FLAGS(7);	/* RWE */
+	note PT_NOTE FLAGS(0);	/* ___ */
+}
+SECTIONS
+{
+  . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
+  phys_startup_32 = startup_32 - LOAD_OFFSET;
+
+  .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
+  	_text = .;			/* Text and read-only data */
+	*(.text.head)
+  } :text = 0x9090
+
+  /* read-only */
+  .text : AT(ADDR(.text) - LOAD_OFFSET) {
+	TEXT_TEXT
+	SCHED_TEXT
+	LOCK_TEXT
+	KPROBES_TEXT
+	*(.fixup)
+	*(.gnu.warning)
+  	_etext = .;			/* End of text section */
+  } :text = 0x9090
+
+  . = ALIGN(16);		/* Exception table */
+  __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+  	__start___ex_table = .;
+	 *(__ex_table)
+  	__stop___ex_table = .;
+  }
+
+  NOTES :text :note
+
+  BUG_TABLE :text
+
+  . = ALIGN(4);
+  .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {
+  	__tracedata_start = .;
+	*(.tracedata)
+  	__tracedata_end = .;
+  }
+
+  RODATA
+
+  /* writeable */
+  . = ALIGN(4096);
+  .data : AT(ADDR(.data) - LOAD_OFFSET) {	/* Data */
+	DATA_DATA
+	CONSTRUCTORS
+	} :data
+
+  . = ALIGN(4096);
+  .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
+  	__nosave_begin = .;
+	*(.data.nosave)
+  	. = ALIGN(4096);
+  	__nosave_end = .;
+  }
+
+  . = ALIGN(4096);
+  .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
+	*(.data.page_aligned)
+	*(.data.idt)
+  }
+
+  . = ALIGN(32);
+  .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
+	*(.data.cacheline_aligned)
+  }
+
+  /* rarely changed data like cpu maps */
+  . = ALIGN(32);
+  .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
+	*(.data.read_mostly)
+	_edata = .;		/* End of data section */
+  }
+
+  . = ALIGN(THREAD_SIZE);	/* init_task */
+  .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
+	*(.data.init_task)
+  }
+
+  /* might get freed after init */
+  . = ALIGN(4096);
+  .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+  	__smp_locks = .;
+	*(.smp_locks)
+	__smp_locks_end = .;
+  }
+  /* will be freed after init
+   * Following ALIGN() is required to make sure no other data falls on the
+   * same page where __smp_alt_end is pointing as that page might be freed
+   * after boot. Always make sure that ALIGN() directive is present after
+   * the section which contains __smp_alt_end.
+   */
+  . = ALIGN(4096);
+
+  /* will be freed after init */
+  . = ALIGN(4096);		/* Init code and data */
+  .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
+  	__init_begin = .;
+	_sinittext = .;
+	*(.init.text)
+	_einittext = .;
+  }
+  .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { *(.init.data) }
+  . = ALIGN(16);
+  .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
+  	__setup_start = .;
+	*(.init.setup)
+  	__setup_end = .;
+   }
+  .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
+  	__initcall_start = .;
+	INITCALLS
+  	__initcall_end = .;
+  }
+  .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+  	__con_initcall_start = .;
+	*(.con_initcall.init)
+  	__con_initcall_end = .;
+  }
+  SECURITY_INIT
+  . = ALIGN(4);
+  .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
+  	__alt_instructions = .;
+	*(.altinstructions)
+	__alt_instructions_end = .;
+  }
+  .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
+	*(.altinstr_replacement)
+  }
+  . = ALIGN(4);
+  .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
+  	__parainstructions = .;
+	*(.parainstructions)
+  	__parainstructions_end = .;
+  }
+  /* .exit.text is discard at runtime, not link time, to deal with references
+     from .altinstructions and .eh_frame */
+  .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { *(.exit.text) }
+  .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { *(.exit.data) }
+#if defined(CONFIG_BLK_DEV_INITRD)
+  . = ALIGN(4096);
+  .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
+	__initramfs_start = .;
+	*(.init.ramfs)
+	__initramfs_end = .;
+  }
+#endif
+  . = ALIGN(4096);
+  .data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
+	__per_cpu_start = .;
+	*(.data.percpu)
+	*(.data.percpu.shared_aligned)
+	__per_cpu_end = .;
+  }
+  . = ALIGN(4096);
+  /* freed after init ends here */
+	
+  .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
+	__init_end = .;
+	__bss_start = .;		/* BSS */
+	*(.bss.page_aligned)
+	*(.bss)
+	. = ALIGN(4);
+	__bss_stop = .;
+  	_end = . ;
+	/* This is where the kernel creates the early boot page tables */
+	. = ALIGN(4096);
+	pg0 = . ;
+  }
+
+  /* Sections to be discarded */
+  /DISCARD/ : {
+	*(.exitcall.exit)
+	}
+
+  STABS_DEBUG
+
+  DWARF_DEBUG
+}