x86_64: move kernel

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 194 insertions, 0 deletions

diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
new file mode 100644
index 000000000000..ecb01eefdd27
--- /dev/null
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -0,0 +1,194 @@
+/*
+ * Copyright 2004 James Cleverdon, IBM.
+ * Subject to the GNU Public License, v.2
+ *
+ * Flat APIC subarch code.
+ *
+ * Hacked for x86-64 by James Cleverdon from i386 architecture code by
+ * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
+ * James Cleverdon.
+ */
+#include <linux/errno.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <asm/smp.h>
+#include <asm/ipi.h>
+#include <asm/genapic.h>
+
+static cpumask_t flat_target_cpus(void)
+{
+	return cpu_online_map;
+}
+
+static cpumask_t flat_vector_allocation_domain(int cpu)
+{
+	/* Careful. Some cpus do not strictly honor the set of cpus
+	 * specified in the interrupt destination when using lowest
+	 * priority interrupt delivery mode.
+	 *
+	 * In particular there was a hyperthreading cpu observed to
+	 * deliver interrupts to the wrong hyperthread when only one
+	 * hyperthread was specified in the interrupt desitination.
+	 */
+	cpumask_t domain = { { [0] = APIC_ALL_CPUS, } };
+	return domain;
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static void flat_init_apic_ldr(void)
+{
+	unsigned long val;
+	unsigned long num, id;
+
+	num = smp_processor_id();
+	id = 1UL << num;
+	x86_cpu_to_log_apicid[num] = id;
+	apic_write(APIC_DFR, APIC_DFR_FLAT);
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	val |= SET_APIC_LOGICAL_ID(id);
+	apic_write(APIC_LDR, val);
+}
+
+static void flat_send_IPI_mask(cpumask_t cpumask, int vector)
+{
+	unsigned long mask = cpus_addr(cpumask)[0];
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__send_IPI_dest_field(mask, vector, APIC_DEST_LOGICAL);
+	local_irq_restore(flags);
+}
+
+static void flat_send_IPI_allbutself(int vector)
+{
+#ifdef	CONFIG_HOTPLUG_CPU
+	int hotplug = 1;
+#else
+	int hotplug = 0;
+#endif
+	if (hotplug || vector == NMI_VECTOR) {
+		cpumask_t allbutme = cpu_online_map;
+
+		cpu_clear(smp_processor_id(), allbutme);
+
+		if (!cpus_empty(allbutme))
+			flat_send_IPI_mask(allbutme, vector);
+	} else if (num_online_cpus() > 1) {
+		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector,APIC_DEST_LOGICAL);
+	}
+}
+
+static void flat_send_IPI_all(int vector)
+{
+	if (vector == NMI_VECTOR)
+		flat_send_IPI_mask(cpu_online_map, vector);
+	else
+		__send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL);
+}
+
+static int flat_apic_id_registered(void)
+{
+	return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map);
+}
+
+static unsigned int flat_cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	return cpus_addr(cpumask)[0] & APIC_ALL_CPUS;
+}
+
+static unsigned int phys_pkg_id(int index_msb)
+{
+	return hard_smp_processor_id() >> index_msb;
+}
+
+struct genapic apic_flat =  {
+	.name = "flat",
+	.int_delivery_mode = dest_LowestPrio,
+	.int_dest_mode = (APIC_DEST_LOGICAL != 0),
+	.target_cpus = flat_target_cpus,
+	.vector_allocation_domain = flat_vector_allocation_domain,
+	.apic_id_registered = flat_apic_id_registered,
+	.init_apic_ldr = flat_init_apic_ldr,
+	.send_IPI_all = flat_send_IPI_all,
+	.send_IPI_allbutself = flat_send_IPI_allbutself,
+	.send_IPI_mask = flat_send_IPI_mask,
+	.cpu_mask_to_apicid = flat_cpu_mask_to_apicid,
+	.phys_pkg_id = phys_pkg_id,
+};
+
+/*
+ * Physflat mode is used when there are more than 8 CPUs on a AMD system.
+ * We cannot use logical delivery in this case because the mask
+ * overflows, so use physical mode.
+ */
+
+static cpumask_t physflat_target_cpus(void)
+{
+	return cpu_online_map;
+}
+
+static cpumask_t physflat_vector_allocation_domain(int cpu)
+{
+	cpumask_t domain = CPU_MASK_NONE;
+	cpu_set(cpu, domain);
+	return domain;
+}
+
+
+static void physflat_send_IPI_mask(cpumask_t cpumask, int vector)
+{
+	send_IPI_mask_sequence(cpumask, vector);
+}
+
+static void physflat_send_IPI_allbutself(int vector)
+{
+	cpumask_t allbutme = cpu_online_map;
+
+	cpu_clear(smp_processor_id(), allbutme);
+	physflat_send_IPI_mask(allbutme, vector);
+}
+
+static void physflat_send_IPI_all(int vector)
+{
+	physflat_send_IPI_mask(cpu_online_map, vector);
+}
+
+static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	cpu = first_cpu(cpumask);
+	if ((unsigned)cpu < NR_CPUS)
+		return x86_cpu_to_apicid[cpu];
+	else
+		return BAD_APICID;
+}
+
+struct genapic apic_physflat =  {
+	.name = "physical flat",
+	.int_delivery_mode = dest_Fixed,
+	.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
+	.target_cpus = physflat_target_cpus,
+	.vector_allocation_domain = physflat_vector_allocation_domain,
+	.apic_id_registered = flat_apic_id_registered,
+	.init_apic_ldr = flat_init_apic_ldr,/*not needed, but shouldn't hurt*/
+	.send_IPI_all = physflat_send_IPI_all,
+	.send_IPI_allbutself = physflat_send_IPI_allbutself,
+	.send_IPI_mask = physflat_send_IPI_mask,
+	.cpu_mask_to_apicid = physflat_cpu_mask_to_apicid,
+	.phys_pkg_id = phys_pkg_id,
+};