Merge branch 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 old platform removal from Peter Anvin:
 "This patchset removes support for several completely obsolete
  platforms, where the maintainers either have completely vanished or
  acked the removal.  For some of them it is questionable if there even
  exists functional specimens of the hardware"

Geert Uytterhoeven apparently thought this was a April Fool's pull request ;)

* 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, platforms: Remove NUMAQ
  x86, platforms: Remove SGI Visual Workstation
  x86, apic: Remove support for IBM Summit/EXA chipset
  x86, apic: Remove support for ia32-based Unisys ES7000

10 files changed, 0 insertions, 485 deletions

diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 2377f5618fb7..8dcd35c4c787 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -90,12 +90,6 @@ enum fixed_addresses {
 	FIX_IO_APIC_BASE_0,
 	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
 #endif
-#ifdef CONFIG_X86_VISWS_APIC
-	FIX_CO_CPU,	/* Cobalt timer */
-	FIX_CO_APIC,	/* Cobalt APIC Redirection Table */
-	FIX_LI_PCIA,	/* Lithium PCI Bridge A */
-	FIX_LI_PCIB,	/* Lithium PCI Bridge B */
-#endif
 	FIX_RO_IDT,	/* Virtual mapping for read-only IDT */
 #ifdef CONFIG_X86_32
 	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index 67d69b8e2d20..a307b7530e54 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -98,7 +98,6 @@ extern void trace_call_function_single_interrupt(void);
 #define IO_APIC_IRQ(x) (((x) >= NR_IRQS_LEGACY) || ((1<<(x)) & io_apic_irqs))
 extern unsigned long io_apic_irqs;
 
-extern void init_VISWS_APIC_irqs(void);
 extern void setup_IO_APIC(void);
 extern void disable_IO_APIC(void);
 
diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h
index 8a9b3e288cb4..1ec990bd7dc0 100644
--- a/arch/x86/include/asm/mmzone_32.h
+++ b/arch/x86/include/asm/mmzone_32.h
@@ -11,9 +11,6 @@
 #ifdef CONFIG_NUMA
 extern struct pglist_data *node_data[];
 #define NODE_DATA(nid)	(node_data[nid])
-
-#include <asm/numaq.h>
-
 #endif /* CONFIG_NUMA */
 
 #ifdef CONFIG_DISCONTIGMEM
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 3e6b4920ef5d..f5a617956735 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -25,12 +25,6 @@ extern int pic_mode;
 
 extern unsigned int def_to_bigsmp;
 
-#ifdef CONFIG_X86_NUMAQ
-extern int mp_bus_id_to_node[MAX_MP_BUSSES];
-extern int mp_bus_id_to_local[MAX_MP_BUSSES];
-extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
-#endif
-
 #else /* CONFIG_X86_64: */
 
 #define MAX_MP_BUSSES		256
diff --git a/arch/x86/include/asm/numaq.h b/arch/x86/include/asm/numaq.h
deleted file mode 100644
index c3b3c322fd87..000000000000
--- a/arch/x86/include/asm/numaq.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Written by: Patricia Gaughen, IBM Corporation
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <gone@us.ibm.com>
- */
-
-#ifndef _ASM_X86_NUMAQ_H
-#define _ASM_X86_NUMAQ_H
-
-#ifdef CONFIG_X86_NUMAQ
-
-extern int found_numaq;
-extern int numaq_numa_init(void);
-extern int pci_numaq_init(void);
-
-extern void *xquad_portio;
-
-#define XQUAD_PORTIO_BASE 0xfe400000
-#define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
-#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
-
-/*
- * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the
- */
-#define SYS_CFG_DATA_PRIV_ADDR		0x0009d000 /* place for scd in private
-						      quad space */
-
-/*
- * Communication area for each processor on lynxer-processor tests.
- *
- * NOTE: If you change the size of this eachproc structure you need
- *       to change the definition for EACH_QUAD_SIZE.
- */
-struct eachquadmem {
-	unsigned int	priv_mem_start;		/* Starting address of this */
-						/* quad's private memory. */
-						/* This is always 0. */
-						/* In MB. */
-	unsigned int	priv_mem_size;		/* Size of this quad's */
-						/* private memory. */
-						/* In MB. */
-	unsigned int	low_shrd_mem_strp_start;/* Starting address of this */
-						/* quad's low shared block */
-						/* (untranslated). */
-						/* In MB. */
-	unsigned int	low_shrd_mem_start;	/* Starting address of this */
-						/* quad's low shared memory */
-						/* (untranslated). */
-						/* In MB. */
-	unsigned int	low_shrd_mem_size;	/* Size of this quad's low */
-						/* shared memory. */
-						/* In MB. */
-	unsigned int	lmmio_copb_start;	/* Starting address of this */
-						/* quad's local memory */
-						/* mapped I/O in the */
-						/* compatibility OPB. */
-						/* In MB. */
-	unsigned int	lmmio_copb_size;	/* Size of this quad's local */
-						/* memory mapped I/O in the */
-						/* compatibility OPB. */
-						/* In MB. */
-	unsigned int	lmmio_nopb_start;	/* Starting address of this */
-						/* quad's local memory */
-						/* mapped I/O in the */
-						/* non-compatibility OPB. */
-						/* In MB. */
-	unsigned int	lmmio_nopb_size;	/* Size of this quad's local */
-						/* memory mapped I/O in the */
-						/* non-compatibility OPB. */
-						/* In MB. */
-	unsigned int	io_apic_0_start;	/* Starting address of I/O */
-						/* APIC 0. */
-	unsigned int	io_apic_0_sz;		/* Size I/O APIC 0. */
-	unsigned int	io_apic_1_start;	/* Starting address of I/O */
-						/* APIC 1. */
-	unsigned int	io_apic_1_sz;		/* Size I/O APIC 1. */
-	unsigned int	hi_shrd_mem_start;	/* Starting address of this */
-						/* quad's high shared memory.*/
-						/* In MB. */
-	unsigned int	hi_shrd_mem_size;	/* Size of this quad's high */
-						/* shared memory. */
-						/* In MB. */
-	unsigned int	mps_table_addr;		/* Address of this quad's */
-						/* MPS tables from BIOS, */
-						/* in system space.*/
-	unsigned int	lcl_MDC_pio_addr;	/* Port-I/O address for */
-						/* local access of MDC. */
-	unsigned int	rmt_MDC_mmpio_addr;	/* MM-Port-I/O address for */
-						/* remote access of MDC. */
-	unsigned int	mm_port_io_start;	/* Starting address of this */
-						/* quad's memory mapped Port */
-						/* I/O space. */
-	unsigned int	mm_port_io_size;	/* Size of this quad's memory*/
-						/* mapped Port I/O space. */
-	unsigned int	mm_rmt_io_apic_start;	/* Starting address of this */
-						/* quad's memory mapped */
-						/* remote I/O APIC space. */
-	unsigned int	mm_rmt_io_apic_size;	/* Size of this quad's memory*/
-						/* mapped remote I/O APIC */
-						/* space. */
-	unsigned int	mm_isa_start;		/* Starting address of this */
-						/* quad's memory mapped ISA */
-						/* space (contains MDC */
-						/* memory space). */
-	unsigned int	mm_isa_size;		/* Size of this quad's memory*/
-						/* mapped ISA space (contains*/
-						/* MDC memory space). */
-	unsigned int	rmt_qmi_addr;		/* Remote addr to access QMI.*/
-	unsigned int	lcl_qmi_addr;		/* Local addr to access QMI. */
-};
-
-/*
- * Note: This structure must be NOT be changed unless the multiproc and
- * OS are changed to reflect the new structure.
- */
-struct sys_cfg_data {
-	unsigned int	quad_id;
-	unsigned int	bsp_proc_id; /* Boot Strap Processor in this quad. */
-	unsigned int	scd_version; /* Version number of this table. */
-	unsigned int	first_quad_id;
-	unsigned int	quads_present31_0; /* 1 bit for each quad */
-	unsigned int	quads_present63_32; /* 1 bit for each quad */
-	unsigned int	config_flags;
-	unsigned int	boot_flags;
-	unsigned int	csr_start_addr; /* Absolute value (not in MB) */
-	unsigned int	csr_size; /* Absolute value (not in MB) */
-	unsigned int	lcl_apic_start_addr; /* Absolute value (not in MB) */
-	unsigned int	lcl_apic_size; /* Absolute value (not in MB) */
-	unsigned int	low_shrd_mem_base; /* 0 or 512MB or 1GB */
-	unsigned int	low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */
-					/* may not be totally populated */
-	unsigned int	split_mem_enbl; /* 0 for no low shared memory */
-	unsigned int	mmio_sz; /* Size of total system memory mapped I/O */
-				 /* (in MB). */
-	unsigned int	quad_spin_lock; /* Spare location used for quad */
-					/* bringup. */
-	unsigned int	nonzero55; /* For checksumming. */
-	unsigned int	nonzeroaa; /* For checksumming. */
-	unsigned int	scd_magic_number;
-	unsigned int	system_type;
-	unsigned int	checksum;
-	/*
-	 *	memory configuration area for each quad
-	 */
-	struct		eachquadmem eq[MAX_NUMNODES];	/* indexed by quad id */
-};
-
-void numaq_tsc_disable(void);
-
-#endif /* CONFIG_X86_NUMAQ */
-#endif /* _ASM_X86_NUMAQ_H */
-
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index d62c9f809bc5..9264f04a4c55 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -39,12 +39,6 @@ static inline void vsmp_init(void) { }
 
 void setup_bios_corruption_check(void);
 
-#ifdef CONFIG_X86_VISWS
-extern void visws_early_detect(void);
-#else
-static inline void visws_early_detect(void) { }
-#endif
-
 extern unsigned long saved_video_mode;
 
 extern void reserve_standard_io_resources(void);
diff --git a/arch/x86/include/asm/visws/cobalt.h b/arch/x86/include/asm/visws/cobalt.h
deleted file mode 100644
index 2edb37637ead..000000000000
--- a/arch/x86/include/asm/visws/cobalt.h
+++ /dev/null
@@ -1,127 +0,0 @@
-#ifndef _ASM_X86_VISWS_COBALT_H
-#define _ASM_X86_VISWS_COBALT_H
-
-#include <asm/fixmap.h>
-
-/*
- * Cobalt SGI Visual Workstation system ASIC
- */ 
-
-#define CO_CPU_NUM_PHYS 0x1e00
-#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2)
-
-#define CO_CPU_MAX 4
-
-#define	CO_CPU_PHYS		0xc2000000
-#define	CO_APIC_PHYS		0xc4000000
-
-/* see set_fixmap() and asm/fixmap.h */
-#define	CO_CPU_VADDR		(fix_to_virt(FIX_CO_CPU))
-#define	CO_APIC_VADDR		(fix_to_virt(FIX_CO_APIC))
-
-/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */
-#define	CO_CPU_REV		0x08
-#define	CO_CPU_CTRL		0x10
-#define	CO_CPU_STAT		0x20
-#define	CO_CPU_TIMEVAL		0x30
-
-/* CO_CPU_CTRL bits */
-#define	CO_CTRL_TIMERUN		0x04		/* 0 == disabled */
-#define	CO_CTRL_TIMEMASK	0x08		/* 0 == unmasked */
-
-/* CO_CPU_STATUS bits */
-#define	CO_STAT_TIMEINTR	0x02	/* (r) 1 == int pend, (w) 0 == clear */
-
-/* CO_CPU_TIMEVAL value */
-#define	CO_TIME_HZ		100000000	/* Cobalt core rate */
-
-/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */
-#define	CO_APIC_HI(n)		(((n) * 0x10) + 4)
-#define	CO_APIC_LO(n)		((n) * 0x10)
-#define	CO_APIC_ID		0x0ffc
-
-/* CO_APIC_ID bits */
-#define	CO_APIC_ENABLE		0x00000100
-
-/* CO_APIC_LO bits */
-#define	CO_APIC_MASK		0x00010000	/* 0 = enabled */
-#define	CO_APIC_LEVEL		0x00008000	/* 0 = edge */
-
-/*
- * Where things are physically wired to Cobalt
- * #defines with no board _<type>_<rev>_ are common to all (thus far)
- */
-#define	CO_APIC_IDE0		4
-#define CO_APIC_IDE1		2		/* Only on 320 */
-
-#define	CO_APIC_8259		12		/* serial, floppy, par-l-l */
-
-/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */
-#define	CO_APIC_PCIA_BASE0	0 /* and 1 */	/* slot 0, line 0 */
-#define	CO_APIC_PCIA_BASE123	5 /* and 6 */	/* slot 0, line 1 */
-
-#define	CO_APIC_PIIX4_USB	7		/* this one is weird */
-
-/* Lithium PCI Bridge B -- "the one with PIIX4" */
-#define	CO_APIC_PCIB_BASE0	8 /* and 9-12 *//* slot 0, line 0 */
-#define	CO_APIC_PCIB_BASE123	13 /* 14.15 */	/* slot 0, line 1 */
-
-#define	CO_APIC_VIDOUT0		16
-#define	CO_APIC_VIDOUT1		17
-#define	CO_APIC_VIDIN0		18
-#define	CO_APIC_VIDIN1		19
-
-#define	CO_APIC_LI_AUDIO	22
-
-#define	CO_APIC_AS		24
-#define	CO_APIC_RE		25
-
-#define CO_APIC_CPU		28		/* Timer and Cache interrupt */
-#define	CO_APIC_NMI		29
-#define	CO_APIC_LAST		CO_APIC_NMI
-
-/*
- * This is how irqs are assigned on the Visual Workstation.
- * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU).
- * All other devices (including PCI) go to Cobalt and are irq's 16 on up.
- */
-#define	CO_IRQ_APIC0	16			/* irq of apic entry 0 */
-#define	IS_CO_APIC(irq)	((irq) >= CO_IRQ_APIC0)
-#define	CO_IRQ(apic)	(CO_IRQ_APIC0 + (apic))	/* apic ent to irq */
-#define	CO_APIC(irq)	((irq) - CO_IRQ_APIC0)	/* irq to apic ent */
-#define CO_IRQ_IDE0	14			/* knowledge of... */
-#define CO_IRQ_IDE1	15			/* ... ide driver defaults! */
-#define	CO_IRQ_8259	CO_IRQ(CO_APIC_8259)
-
-#ifdef CONFIG_X86_VISWS_APIC
-static inline void co_cpu_write(unsigned long reg, unsigned long v)
-{
-	*((volatile unsigned long *)(CO_CPU_VADDR+reg))=v;
-}
-
-static inline unsigned long co_cpu_read(unsigned long reg)
-{
-	return *((volatile unsigned long *)(CO_CPU_VADDR+reg));
-}            
-             
-static inline void co_apic_write(unsigned long reg, unsigned long v)
-{
-	*((volatile unsigned long *)(CO_APIC_VADDR+reg))=v;
-}            
-             
-static inline unsigned long co_apic_read(unsigned long reg)
-{
-	return *((volatile unsigned long *)(CO_APIC_VADDR+reg));
-}
-#endif
-
-extern char visws_board_type;
-
-#define	VISWS_320	0
-#define	VISWS_540	1
-
-extern char visws_board_rev;
-
-extern int pci_visws_init(void);
-
-#endif /* _ASM_X86_VISWS_COBALT_H */
diff --git a/arch/x86/include/asm/visws/lithium.h b/arch/x86/include/asm/visws/lithium.h
deleted file mode 100644
index a10d89bc1270..000000000000
--- a/arch/x86/include/asm/visws/lithium.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _ASM_X86_VISWS_LITHIUM_H
-#define _ASM_X86_VISWS_LITHIUM_H
-
-#include <asm/fixmap.h>
-
-/*
- * Lithium is the SGI Visual Workstation I/O ASIC
- */
-
-#define	LI_PCI_A_PHYS		0xfc000000	/* Enet is dev 3 */
-#define	LI_PCI_B_PHYS		0xfd000000	/* PIIX4 is here */
-
-/* see set_fixmap() and asm/fixmap.h */
-#define LI_PCIA_VADDR   (fix_to_virt(FIX_LI_PCIA))
-#define LI_PCIB_VADDR   (fix_to_virt(FIX_LI_PCIB))
-
-/* Not a standard PCI? (not in linux/pci.h) */
-#define	LI_PCI_BUSNUM	0x44			/* lo8: primary, hi8: sub */
-#define LI_PCI_INTEN    0x46
-
-/* LI_PCI_INTENT bits */
-#define	LI_INTA_0	0x0001
-#define	LI_INTA_1	0x0002
-#define	LI_INTA_2	0x0004
-#define	LI_INTA_3	0x0008
-#define	LI_INTA_4	0x0010
-#define	LI_INTB		0x0020
-#define	LI_INTC		0x0040
-#define	LI_INTD		0x0080
-
-/* More special purpose macros... */
-static inline void li_pcia_write16(unsigned long reg, unsigned short v)
-{
-	*((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v;
-}
-
-static inline unsigned short li_pcia_read16(unsigned long reg)
-{
-	 return *((volatile unsigned short *)(LI_PCIA_VADDR+reg));
-}
-
-static inline void li_pcib_write16(unsigned long reg, unsigned short v)
-{
-	*((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v;
-}
-
-static inline unsigned short li_pcib_read16(unsigned long reg)
-{
-	return *((volatile unsigned short *)(LI_PCIB_VADDR+reg));
-}
-
-#endif /* _ASM_X86_VISWS_LITHIUM_H */
-
diff --git a/arch/x86/include/asm/visws/piix4.h b/arch/x86/include/asm/visws/piix4.h
deleted file mode 100644
index d0af4d338e7f..000000000000
--- a/arch/x86/include/asm/visws/piix4.h
+++ /dev/null
@@ -1,107 +0,0 @@
-#ifndef _ASM_X86_VISWS_PIIX4_H
-#define _ASM_X86_VISWS_PIIX4_H
-
-/*
- * PIIX4 as used on SGI Visual Workstations
- */
-
-#define	PIIX_PM_START		0x0F80
-
-#define	SIO_GPIO_START		0x0FC0
-
-#define	SIO_PM_START		0x0FC8
-
-#define	PMBASE			PIIX_PM_START
-#define	GPIREG0			(PMBASE+0x30)
-#define	GPIREG(x)		(GPIREG0+((x)/8))
-#define	GPIBIT(x)		(1 << ((x)%8))
-
-#define	PIIX_GPI_BD_ID1		18
-#define	PIIX_GPI_BD_ID2		19
-#define	PIIX_GPI_BD_ID3		20
-#define	PIIX_GPI_BD_ID4		21
-#define	PIIX_GPI_BD_REG		GPIREG(PIIX_GPI_BD_ID1)
-#define	PIIX_GPI_BD_MASK	(GPIBIT(PIIX_GPI_BD_ID1) | \
-				GPIBIT(PIIX_GPI_BD_ID2) | \
-				GPIBIT(PIIX_GPI_BD_ID3) | \
-				GPIBIT(PIIX_GPI_BD_ID4) )
-
-#define	PIIX_GPI_BD_SHIFT	(PIIX_GPI_BD_ID1 % 8)
-
-#define	SIO_INDEX		0x2e
-#define	SIO_DATA		0x2f
-
-#define	SIO_DEV_SEL		0x7
-#define	SIO_DEV_ENB		0x30
-#define	SIO_DEV_MSB		0x60
-#define	SIO_DEV_LSB		0x61
-
-#define	SIO_GP_DEV		0x7
-
-#define	SIO_GP_BASE		SIO_GPIO_START
-#define	SIO_GP_MSB		(SIO_GP_BASE>>8)
-#define	SIO_GP_LSB		(SIO_GP_BASE&0xff)
-
-#define	SIO_GP_DATA1		(SIO_GP_BASE+0)
-
-#define	SIO_PM_DEV		0x8
-
-#define	SIO_PM_BASE		SIO_PM_START
-#define	SIO_PM_MSB		(SIO_PM_BASE>>8)
-#define	SIO_PM_LSB		(SIO_PM_BASE&0xff)
-#define	SIO_PM_INDEX		(SIO_PM_BASE+0)
-#define	SIO_PM_DATA		(SIO_PM_BASE+1)
-
-#define	SIO_PM_FER2		0x1
-
-#define	SIO_PM_GP_EN		0x80
-
-
-
-/*
- * This is the dev/reg where generating a config cycle will
- * result in a PCI special cycle.
- */
-#define SPECIAL_DEV		0xff
-#define SPECIAL_REG		0x00
-
-/*
- * PIIX4 needs to see a special cycle with the following data
- * to be convinced the processor has gone into the stop grant
- * state.  PIIX4 insists on seeing this before it will power
- * down a system.
- */
-#define PIIX_SPECIAL_STOP		0x00120002
-
-#define PIIX4_RESET_PORT	0xcf9
-#define PIIX4_RESET_VAL		0x6
-
-#define PMSTS_PORT		0xf80	// 2 bytes	PM Status
-#define PMEN_PORT		0xf82	// 2 bytes	PM Enable
-#define	PMCNTRL_PORT		0xf84	// 2 bytes	PM Control
-
-#define PM_SUSPEND_ENABLE	0x2000	// start sequence to suspend state
-
-/*
- * PMSTS and PMEN I/O bit definitions.
- * (Bits are the same in both registers)
- */
-#define PM_STS_RSM		(1<<15)	// Resume Status
-#define PM_STS_PWRBTNOR		(1<<11)	// Power Button Override
-#define PM_STS_RTC		(1<<10)	// RTC status
-#define PM_STS_PWRBTN		(1<<8)	// Power Button Pressed?
-#define PM_STS_GBL		(1<<5)	// Global Status
-#define PM_STS_BM		(1<<4)	// Bus Master Status
-#define PM_STS_TMROF		(1<<0)	// Timer Overflow Status.
-
-/*
- * Stop clock GPI register
- */
-#define PIIX_GPIREG0			(0xf80 + 0x30)
-
-/*
- * Stop clock GPI bit in GPIREG0
- */
-#define	PIIX_GPI_STPCLK		0x4	// STPCLK signal routed back in
-
-#endif /* _ASM_X86_VISWS_PIIX4_H */
diff --git a/arch/x86/include/asm/visws/sgivw.h b/arch/x86/include/asm/visws/sgivw.h
deleted file mode 100644
index 5fbf63e1003c..000000000000
--- a/arch/x86/include/asm/visws/sgivw.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * Frame buffer position and size:
- */
-extern unsigned long sgivwfb_mem_phys;
-extern unsigned long sgivwfb_mem_size;