diff options
| author | Yong Wang <yong.y.wang@linux.intel.com> | 2009-11-10 09:38:24 +0800 |
|---|---|---|
| committer | Ingo Molnar <mingo@elte.hu> | 2009-11-10 05:57:55 +0100 |
| commit | a2202aa29289db64ca7988b12343158b67b27f10 (patch) | |
| tree | e84a34b587b07243b3d3557795f8e3fa03302fee /arch/x86/include/asm/mce.h | |
| parent | b33a6363649f0ff83ec81597ea7fe7e688f973cb (diff) | |
| download | linux-a2202aa29289db64ca7988b12343158b67b27f10.tar.bz2 | |
x86: Under BIOS control, restore AP's APIC_LVTTHMR to the BSP value
On platforms where the BIOS handles the thermal monitor interrupt,
APIC_LVTTHMR on each logical CPU is programmed to generate a SMI
and OS must not touch it.
Unfortunately AP bringup sequence using INIT-SIPI-SIPI clears all
the LVT entries except the mask bit. Essentially this results in
all LVT entries including the thermal monitoring interrupt set
to masked (clearing the bios programmed value for APIC_LVTTHMR).
And this leads to kernel take over the thermal monitoring
interrupt on AP's but not on BSP (leaving the bios programmed
value only on BSP).
As a result of this, we have seen system hangs when the thermal
monitoring interrupt is generated.
Fix this by reading the initial value of thermal LVT entry on
BSP and if bios has taken over the control, then program the
same value on all AP's and leave the thermal monitoring
interrupt control on all the logical cpu's to the bios.
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Reviewed-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20091110013824.GA24940@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: stable@kernel.org
Diffstat (limited to 'arch/x86/include/asm/mce.h')
| -rw-r--r-- | arch/x86/include/asm/mce.h | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 161485da6838..858baa061cfc 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -120,8 +120,10 @@ extern int mce_disabled; extern int mce_p5_enabled; #ifdef CONFIG_X86_MCE +int mcheck_init(void); void mcheck_cpu_init(struct cpuinfo_x86 *c); #else +static inline int mcheck_init(void) { return 0; } static inline void mcheck_cpu_init(struct cpuinfo_x86 *c) {} #endif @@ -215,5 +217,12 @@ extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu); void intel_init_thermal(struct cpuinfo_x86 *c); void mce_log_therm_throt_event(__u64 status); + +#ifdef CONFIG_X86_THERMAL_VECTOR +extern void mcheck_intel_therm_init(void); +#else +static inline void mcheck_intel_therm_init(void) { } +#endif + #endif /* __KERNEL__ */ #endif /* _ASM_X86_MCE_H */ |