x86/boot/e820: Introduce arch/x86/include/asm/e820/types.h

First baby steps towards saner e820 headers: create an exact copy of
arch/x86/include/uapi/asm/e820.h and use it from the asm/e820.h file.

No other changes - this is done to decouple the code from UAPI headers,
plus to make sure that subsequent modifications to the file can be more
clearly seen.

The plan is to keep the old UAPI header in place but the kernel won't
use it anymore - and after some time we'll try to remove it. (User-space
tools better have local copies of headers anyway, instead of relying
on kernel headers.)

This gives the kernel the freedom to reorganize the e820 code.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 81 insertions, 0 deletions

diff --git a/arch/x86/include/asm/e820/types.h b/arch/x86/include/asm/e820/types.h
new file mode 100644
index 000000000000..9dafe59cf6e2
--- /dev/null
+++ b/arch/x86/include/asm/e820/types.h
@@ -0,0 +1,81 @@
+#ifndef _UAPI_ASM_X86_E820_H
+#define _UAPI_ASM_X86_E820_H
+#define E820MAP	0x2d0		/* our map */
+#define E820MAX	128		/* number of entries in E820MAP */
+
+/*
+ * Legacy E820 BIOS limits us to 128 (E820MAX) nodes due to the
+ * constrained space in the zeropage.  If we have more nodes than
+ * that, and if we've booted off EFI firmware, then the EFI tables
+ * passed us from the EFI firmware can list more nodes.  Size our
+ * internal memory map tables to have room for these additional
+ * nodes, based on up to three entries per node for which the
+ * kernel was built: MAX_NUMNODES == (1 << CONFIG_NODES_SHIFT),
+ * plus E820MAX, allowing space for the possible duplicate E820
+ * entries that might need room in the same arrays, prior to the
+ * call to sanitize_e820_map() to remove duplicates.  The allowance
+ * of three memory map entries per node is "enough" entries for
+ * the initial hardware platform motivating this mechanism to make
+ * use of additional EFI map entries.  Future platforms may want
+ * to allow more than three entries per node or otherwise refine
+ * this size.
+ */
+
+#ifndef __KERNEL__
+#define E820_X_MAX E820MAX
+#endif
+
+#define E820NR	0x1e8		/* # entries in E820MAP */
+
+#define E820_RAM	1
+#define E820_RESERVED	2
+#define E820_ACPI	3
+#define E820_NVS	4
+#define E820_UNUSABLE	5
+#define E820_PMEM	7
+
+/*
+ * This is a non-standardized way to represent ADR or NVDIMM regions that
+ * persist over a reboot.  The kernel will ignore their special capabilities
+ * unless the CONFIG_X86_PMEM_LEGACY option is set.
+ *
+ * ( Note that older platforms also used 6 for the same type of memory,
+ *   but newer versions switched to 12 as 6 was assigned differently.  Some
+ *   time they will learn... )
+ */
+#define E820_PRAM	12
+
+/*
+ * reserved RAM used by kernel itself
+ * if CONFIG_INTEL_TXT is enabled, memory of this type will be
+ * included in the S3 integrity calculation and so should not include
+ * any memory that BIOS might alter over the S3 transition
+ */
+#define E820_RESERVED_KERN        128
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+struct e820entry {
+	__u64 addr;	/* start of memory segment */
+	__u64 size;	/* size of memory segment */
+	__u32 type;	/* type of memory segment */
+} __attribute__((packed));
+
+struct e820map {
+	__u32 nr_map;
+	struct e820entry map[E820_X_MAX];
+};
+
+#define ISA_START_ADDRESS	0xa0000
+#define ISA_END_ADDRESS		0x100000
+
+#define BIOS_BEGIN		0x000a0000
+#define BIOS_END		0x00100000
+
+#define BIOS_ROM_BASE		0xffe00000
+#define BIOS_ROM_END		0xffffffff
+
+#endif /* __ASSEMBLY__ */
+
+
+#endif /* _UAPI_ASM_X86_E820_H */