Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 asm updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Cross-arch changes to move the linker sections for NOTES and
     EXCEPTION_TABLE into the RO_DATA area, where they belong on most
     architectures. (Kees Cook)

   - Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to
     trap jumps into the middle of those padding areas instead of
     sliding execution. (Kees Cook)

   - A thorough cleanup of symbol definitions within x86 assembler code.
     The rather randomly named macros got streamlined around a
     (hopefully) straightforward naming scheme:

        SYM_START(name, linkage, align...)
        SYM_END(name, sym_type)

        SYM_FUNC_START(name)
        SYM_FUNC_END(name)

        SYM_CODE_START(name)
        SYM_CODE_END(name)

        SYM_DATA_START(name)
        SYM_DATA_END(name)

     etc - with about three times of these basic primitives with some
     label, local symbol or attribute variant, expressed via postfixes.

     No change in functionality intended. (Jiri Slaby)

   - Misc other changes, cleanups and smaller fixes"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
  x86/entry/64: Remove pointless jump in paranoid_exit
  x86/entry/32: Remove unused resume_userspace label
  x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o
  m68k: Convert missed RODATA to RO_DATA
  x86/vmlinux: Use INT3 instead of NOP for linker fill bytes
  x86/mm: Report actual image regions in /proc/iomem
  x86/mm: Report which part of kernel image is freed
  x86/mm: Remove redundant address-of operators on addresses
  xtensa: Move EXCEPTION_TABLE to RO_DATA segment
  powerpc: Move EXCEPTION_TABLE to RO_DATA segment
  parisc: Move EXCEPTION_TABLE to RO_DATA segment
  microblaze: Move EXCEPTION_TABLE to RO_DATA segment
  ia64: Move EXCEPTION_TABLE to RO_DATA segment
  h8300: Move EXCEPTION_TABLE to RO_DATA segment
  c6x: Move EXCEPTION_TABLE to RO_DATA segment
  arm64: Move EXCEPTION_TABLE to RO_DATA segment
  alpha: Move EXCEPTION_TABLE to RO_DATA segment
  x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment
  x86/vmlinux: Actually use _etext for the end of the text segment
  vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA
  ...

7 files changed, 151 insertions, 152 deletions

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index f07baf0388bc..09fe5606a118 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -730,7 +730,7 @@
  * %eax: prev task
  * %edx: next task
  */
-ENTRY(__switch_to_asm)
+SYM_CODE_START(__switch_to_asm)
 	/*
 	 * Save callee-saved registers
 	 * This must match the order in struct inactive_task_frame
@@ -769,7 +769,7 @@ ENTRY(__switch_to_asm)
 	popl	%ebp
 
 	jmp	__switch_to
-END(__switch_to_asm)
+SYM_CODE_END(__switch_to_asm)
 
 /*
  * The unwinder expects the last frame on the stack to always be at the same
@@ -778,7 +778,7 @@ END(__switch_to_asm)
  * asmlinkage function so its argument has to be pushed on the stack.  This
  * wrapper creates a proper "end of stack" frame header before the call.
  */
-ENTRY(schedule_tail_wrapper)
+SYM_FUNC_START(schedule_tail_wrapper)
 	FRAME_BEGIN
 
 	pushl	%eax
@@ -787,7 +787,7 @@ ENTRY(schedule_tail_wrapper)
 
 	FRAME_END
 	ret
-ENDPROC(schedule_tail_wrapper)
+SYM_FUNC_END(schedule_tail_wrapper)
 /*
  * A newly forked process directly context switches into this address.
  *
@@ -795,7 +795,7 @@ ENDPROC(schedule_tail_wrapper)
  * ebx: kernel thread func (NULL for user thread)
  * edi: kernel thread arg
  */
-ENTRY(ret_from_fork)
+SYM_CODE_START(ret_from_fork)
 	call	schedule_tail_wrapper
 
 	testl	%ebx, %ebx
@@ -818,7 +818,7 @@ ENTRY(ret_from_fork)
 	 */
 	movl	$0, PT_EAX(%esp)
 	jmp	2b
-END(ret_from_fork)
+SYM_CODE_END(ret_from_fork)
 
 /*
  * Return to user mode is not as complex as all this looks,
@@ -828,8 +828,7 @@ END(ret_from_fork)
  */
 
 	# userspace resumption stub bypassing syscall exit tracing
-	ALIGN
-ret_from_exception:
+SYM_CODE_START_LOCAL(ret_from_exception)
 	preempt_stop(CLBR_ANY)
 ret_from_intr:
 #ifdef CONFIG_VM86
@@ -846,15 +845,14 @@ ret_from_intr:
 	cmpl	$USER_RPL, %eax
 	jb	restore_all_kernel		# not returning to v8086 or userspace
 
-ENTRY(resume_userspace)
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF
 	movl	%esp, %eax
 	call	prepare_exit_to_usermode
 	jmp	restore_all
-END(ret_from_exception)
+SYM_CODE_END(ret_from_exception)
 
-GLOBAL(__begin_SYSENTER_singlestep_region)
+SYM_ENTRY(__begin_SYSENTER_singlestep_region, SYM_L_GLOBAL, SYM_A_NONE)
 /*
  * All code from here through __end_SYSENTER_singlestep_region is subject
  * to being single-stepped if a user program sets TF and executes SYSENTER.
@@ -869,9 +867,10 @@ GLOBAL(__begin_SYSENTER_singlestep_region)
  * Xen doesn't set %esp to be precisely what the normal SYSENTER
  * entry point expects, so fix it up before using the normal path.
  */
-ENTRY(xen_sysenter_target)
+SYM_CODE_START(xen_sysenter_target)
 	addl	$5*4, %esp			/* remove xen-provided frame */
 	jmp	.Lsysenter_past_esp
+SYM_CODE_END(xen_sysenter_target)
 #endif
 
 /*
@@ -906,7 +905,7 @@ ENTRY(xen_sysenter_target)
  * ebp  user stack
  * 0(%ebp) arg6
  */
-ENTRY(entry_SYSENTER_32)
+SYM_FUNC_START(entry_SYSENTER_32)
 	/*
 	 * On entry-stack with all userspace-regs live - save and
 	 * restore eflags and %eax to use it as scratch-reg for the cr3
@@ -1033,8 +1032,8 @@ ENTRY(entry_SYSENTER_32)
 	pushl	$X86_EFLAGS_FIXED
 	popfl
 	jmp	.Lsysenter_flags_fixed
-GLOBAL(__end_SYSENTER_singlestep_region)
-ENDPROC(entry_SYSENTER_32)
+SYM_ENTRY(__end_SYSENTER_singlestep_region, SYM_L_GLOBAL, SYM_A_NONE)
+SYM_FUNC_END(entry_SYSENTER_32)
 
 /*
  * 32-bit legacy system call entry.
@@ -1064,7 +1063,7 @@ ENDPROC(entry_SYSENTER_32)
  * edi  arg5
  * ebp  arg6
  */
-ENTRY(entry_INT80_32)
+SYM_FUNC_START(entry_INT80_32)
 	ASM_CLAC
 	pushl	%eax			/* pt_regs->orig_ax */
 
@@ -1120,7 +1119,7 @@ restore_all_kernel:
 	jmp	.Lirq_return
 
 .section .fixup, "ax"
-ENTRY(iret_exc	)
+SYM_CODE_START(iret_exc)
 	pushl	$0				# no error code
 	pushl	$do_iret_error
 
@@ -1137,9 +1136,10 @@ ENTRY(iret_exc	)
 #endif
 
 	jmp	common_exception
+SYM_CODE_END(iret_exc)
 .previous
 	_ASM_EXTABLE(.Lirq_return, iret_exc)
-ENDPROC(entry_INT80_32)
+SYM_FUNC_END(entry_INT80_32)
 
 .macro FIXUP_ESPFIX_STACK
 /*
@@ -1193,7 +1193,7 @@ ENDPROC(entry_INT80_32)
  * We pack 1 stub into every 8-byte block.
  */
 	.align 8
-ENTRY(irq_entries_start)
+SYM_CODE_START(irq_entries_start)
     vector=FIRST_EXTERNAL_VECTOR
     .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
 	pushl	$(~vector+0x80)			/* Note: always in signed byte range */
@@ -1201,11 +1201,11 @@ ENTRY(irq_entries_start)
 	jmp	common_interrupt
 	.align	8
     .endr
-END(irq_entries_start)
+SYM_CODE_END(irq_entries_start)
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	.align 8
-ENTRY(spurious_entries_start)
+SYM_CODE_START(spurious_entries_start)
     vector=FIRST_SYSTEM_VECTOR
     .rept (NR_VECTORS - FIRST_SYSTEM_VECTOR)
 	pushl	$(~vector+0x80)			/* Note: always in signed byte range */
@@ -1213,9 +1213,9 @@ ENTRY(spurious_entries_start)
 	jmp	common_spurious
 	.align	8
     .endr
-END(spurious_entries_start)
+SYM_CODE_END(spurious_entries_start)
 
-common_spurious:
+SYM_CODE_START_LOCAL(common_spurious)
 	ASM_CLAC
 	addl	$-0x80, (%esp)			/* Adjust vector into the [-256, -1] range */
 	SAVE_ALL switch_stacks=1
@@ -1224,7 +1224,7 @@ common_spurious:
 	movl	%esp, %eax
 	call	smp_spurious_interrupt
 	jmp	ret_from_intr
-ENDPROC(common_spurious)
+SYM_CODE_END(common_spurious)
 #endif
 
 /*
@@ -1232,7 +1232,7 @@ ENDPROC(common_spurious)
  * so IRQ-flags tracing has to follow that:
  */
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
-common_interrupt:
+SYM_CODE_START_LOCAL(common_interrupt)
 	ASM_CLAC
 	addl	$-0x80, (%esp)			/* Adjust vector into the [-256, -1] range */
 
@@ -1242,10 +1242,10 @@ common_interrupt:
 	movl	%esp, %eax
 	call	do_IRQ
 	jmp	ret_from_intr
-ENDPROC(common_interrupt)
+SYM_CODE_END(common_interrupt)
 
 #define BUILD_INTERRUPT3(name, nr, fn)			\
-ENTRY(name)						\
+SYM_FUNC_START(name)					\
 	ASM_CLAC;					\
 	pushl	$~(nr);					\
 	SAVE_ALL switch_stacks=1;			\
@@ -1254,7 +1254,7 @@ ENTRY(name)						\
 	movl	%esp, %eax;				\
 	call	fn;					\
 	jmp	ret_from_intr;				\
-ENDPROC(name)
+SYM_FUNC_END(name)
 
 #define BUILD_INTERRUPT(name, nr)		\
 	BUILD_INTERRUPT3(name, nr, smp_##name);	\
@@ -1262,14 +1262,14 @@ ENDPROC(name)
 /* The include is where all of the SMP etc. interrupts come from */
 #include <asm/entry_arch.h>
 
-ENTRY(coprocessor_error)
+SYM_CODE_START(coprocessor_error)
 	ASM_CLAC
 	pushl	$0
 	pushl	$do_coprocessor_error
 	jmp	common_exception
-END(coprocessor_error)
+SYM_CODE_END(coprocessor_error)
 
-ENTRY(simd_coprocessor_error)
+SYM_CODE_START(simd_coprocessor_error)
 	ASM_CLAC
 	pushl	$0
 #ifdef CONFIG_X86_INVD_BUG
@@ -1281,99 +1281,99 @@ ENTRY(simd_coprocessor_error)
 	pushl	$do_simd_coprocessor_error
 #endif
 	jmp	common_exception
-END(simd_coprocessor_error)
+SYM_CODE_END(simd_coprocessor_error)
 
-ENTRY(device_not_available)
+SYM_CODE_START(device_not_available)
 	ASM_CLAC
 	pushl	$-1				# mark this as an int
 	pushl	$do_device_not_available
 	jmp	common_exception
-END(device_not_available)
+SYM_CODE_END(device_not_available)
 
 #ifdef CONFIG_PARAVIRT
-ENTRY(native_iret)
+SYM_CODE_START(native_iret)
 	iret
 	_ASM_EXTABLE(native_iret, iret_exc)
-END(native_iret)
+SYM_CODE_END(native_iret)
 #endif
 
-ENTRY(overflow)
+SYM_CODE_START(overflow)
 	ASM_CLAC
 	pushl	$0
 	pushl	$do_overflow
 	jmp	common_exception
-END(overflow)
+SYM_CODE_END(overflow)
 
-ENTRY(bounds)
+SYM_CODE_START(bounds)
 	ASM_CLAC
 	pushl	$0
 	pushl	$do_bounds
 	jmp	common_exception
-END(bounds)
+SYM_CODE_END(bounds)
 
-ENTRY(invalid_op)
+SYM_CODE_START(invalid_op)
 	ASM_CLAC
 	pushl	$0
 	pushl	$do_invalid_op
 	jmp	common_exception
-END(invalid_op)
+SYM_CODE_END(invalid_op)
 
-ENTRY(coprocessor_segment_overrun)
+SYM_CODE_START(coprocessor_segment_overrun)
 	ASM_CLAC
 	pushl	$0
 	pushl	$do_coprocessor_segment_overrun
 	jmp	common_exception
-END(coprocessor_segment_overrun)
+SYM_CODE_END(coprocessor_segment_overrun)
 
-ENTRY(invalid_TSS)
+SYM_CODE_START(invalid_TSS)
 	ASM_CLAC
 	pushl	$do_invalid_TSS
 	jmp	common_exception
-END(invalid_TSS)
+SYM_CODE_END(invalid_TSS)
 
-ENTRY(segment_not_present)
+SYM_CODE_START(segment_not_present)
 	ASM_CLAC
 	pushl	$do_segment_not_present
 	jmp	common_exception
-END(segment_not_present)
+SYM_CODE_END(segment_not_present)
 
-ENTRY(stack_segment)
+SYM_CODE_START(stack_segment)
 	ASM_CLAC
 	pushl	$do_stack_segment
 	jmp	common_exception
-END(stack_segment)
+SYM_CODE_END(stack_segment)
 
-ENTRY(alignment_check)
+SYM_CODE_START(alignment_check)
 	ASM_CLAC
 	pushl	$do_alignment_check
 	jmp	common_exception
-END(alignment_check)
+SYM_CODE_END(alignment_check)
 
-ENTRY(divide_error)
+SYM_CODE_START(divide_error)
 	ASM_CLAC
 	pushl	$0				# no error code
 	pushl	$do_divide_error
 	jmp	common_exception
-END(divide_error)
+SYM_CODE_END(divide_error)
 
 #ifdef CONFIG_X86_MCE
-ENTRY(machine_check)
+SYM_CODE_START(machine_check)
 	ASM_CLAC
 	pushl	$0
 	pushl	machine_check_vector
 	jmp	common_exception
-END(machine_check)
+SYM_CODE_END(machine_check)
 #endif
 
-ENTRY(spurious_interrupt_bug)
+SYM_CODE_START(spurious_interrupt_bug)
 	ASM_CLAC
 	pushl	$0
 	pushl	$do_spurious_interrupt_bug
 	jmp	common_exception
-END(spurious_interrupt_bug)
+SYM_CODE_END(spurious_interrupt_bug)
 
 #ifdef CONFIG_XEN_PV
-ENTRY(xen_hypervisor_callback)
+SYM_FUNC_START(xen_hypervisor_callback)
 	/*
 	 * Check to see if we got the event in the critical
 	 * region in xen_iret_direct, after we've reenabled
@@ -1397,7 +1397,7 @@ ENTRY(xen_hypervisor_callback)
 	call	xen_maybe_preempt_hcall
 #endif
 	jmp	ret_from_intr
-ENDPROC(xen_hypervisor_callback)
+SYM_FUNC_END(xen_hypervisor_callback)
 
 /*
  * Hypervisor uses this for application faults while it executes.
@@ -1411,7 +1411,7 @@ ENDPROC(xen_hypervisor_callback)
  * to pop the stack frame we end up in an infinite loop of failsafe callbacks.
  * We distinguish between categories by maintaining a status value in EAX.
  */
-ENTRY(xen_failsafe_callback)
+SYM_FUNC_START(xen_failsafe_callback)
 	pushl	%eax
 	movl	$1, %eax
 1:	mov	4(%esp), %ds
@@ -1448,7 +1448,7 @@ ENTRY(xen_failsafe_callback)
 	_ASM_EXTABLE(2b, 7b)
 	_ASM_EXTABLE(3b, 8b)
 	_ASM_EXTABLE(4b, 9b)
-ENDPROC(xen_failsafe_callback)
+SYM_FUNC_END(xen_failsafe_callback)
 #endif /* CONFIG_XEN_PV */
 
 #ifdef CONFIG_XEN_PVHVM
@@ -1470,13 +1470,13 @@ BUILD_INTERRUPT3(hv_stimer0_callback_vector, HYPERV_STIMER0_VECTOR,
 
 #endif /* CONFIG_HYPERV */
 
-ENTRY(page_fault)
+SYM_CODE_START(page_fault)
 	ASM_CLAC
 	pushl	$do_page_fault
 	jmp	common_exception_read_cr2
-END(page_fault)
+SYM_CODE_END(page_fault)
 
-common_exception_read_cr2:
+SYM_CODE_START_LOCAL_NOALIGN(common_exception_read_cr2)
 	/* the function address is in %gs's slot on the stack */
 	SAVE_ALL switch_stacks=1 skip_gs=1 unwind_espfix=1
 
@@ -1498,9 +1498,9 @@ common_exception_read_cr2:
 	movl	%esp, %eax			# pt_regs pointer
 	CALL_NOSPEC %edi
 	jmp	ret_from_exception
-END(common_exception_read_cr2)
+SYM_CODE_END(common_exception_read_cr2)
 
-common_exception:
+SYM_CODE_START_LOCAL_NOALIGN(common_exception)
 	/* the function address is in %gs's slot on the stack */
 	SAVE_ALL switch_stacks=1 skip_gs=1 unwind_espfix=1
 	ENCODE_FRAME_POINTER
@@ -1519,9 +1519,9 @@ common_exception:
 	movl	%esp, %eax			# pt_regs pointer
 	CALL_NOSPEC %edi
 	jmp	ret_from_exception
-END(common_exception)
+SYM_CODE_END(common_exception)
 
-ENTRY(debug)
+SYM_CODE_START(debug)
 	/*
 	 * Entry from sysenter is now handled in common_exception
 	 */
@@ -1529,7 +1529,7 @@ ENTRY(debug)
 	pushl	$-1				# mark this as an int
 	pushl	$do_debug
 	jmp	common_exception
-END(debug)
+SYM_CODE_END(debug)
 
 /*
  * NMI is doubly nasty.  It can happen on the first instruction of
@@ -1538,7 +1538,7 @@ END(debug)
  * switched stacks.  We handle both conditions by simply checking whether we
  * interrupted kernel code running on the SYSENTER stack.
  */
-ENTRY(nmi)
+SYM_CODE_START(nmi)
 	ASM_CLAC
 
 #ifdef CONFIG_X86_ESPFIX32
@@ -1631,9 +1631,9 @@ ENTRY(nmi)
 	lss	(1+5+6)*4(%esp), %esp			# back to espfix stack
 	jmp	.Lirq_return
 #endif
-END(nmi)
+SYM_CODE_END(nmi)
 
-ENTRY(int3)
+SYM_CODE_START(int3)
 	ASM_CLAC
 	pushl	$-1				# mark this as an int
 
@@ -1644,22 +1644,22 @@ ENTRY(int3)
 	movl	%esp, %eax			# pt_regs pointer
 	call	do_int3
 	jmp	ret_from_exception
-END(int3)
+SYM_CODE_END(int3)
 
-ENTRY(general_protection)
+SYM_CODE_START(general_protection)
 	pushl	$do_general_protection
 	jmp	common_exception
-END(general_protection)
+SYM_CODE_END(general_protection)
 
 #ifdef CONFIG_KVM_GUEST
-ENTRY(async_page_fault)
+SYM_CODE_START(async_page_fault)
 	ASM_CLAC
 	pushl	$do_async_page_fault
 	jmp	common_exception_read_cr2
-END(async_page_fault)
+SYM_CODE_END(async_page_fault)
 #endif
 
-ENTRY(rewind_stack_do_exit)
+SYM_CODE_START(rewind_stack_do_exit)
 	/* Prevent any naive code from trying to unwind to our caller. */
 	xorl	%ebp, %ebp
 
@@ -1668,4 +1668,4 @@ ENTRY(rewind_stack_do_exit)
 
 	call	do_exit
 1:	jmp 1b
-END(rewind_stack_do_exit)
+SYM_CODE_END(rewind_stack_do_exit)
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index b7c3ea4cb19d..76942cbd95a1 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -15,7 +15,7 @@
  *			at the top of the kernel process stack.
  *
  * Some macro usage:
- * - ENTRY/END:		Define functions in the symbol table.
+ * - SYM_FUNC_START/END:Define functions in the symbol table.
  * - TRACE_IRQ_*:	Trace hardirq state for lock debugging.
  * - idtentry:		Define exception entry points.
  */
@@ -46,11 +46,11 @@
 .section .entry.text, "ax"
 
 #ifdef CONFIG_PARAVIRT
-ENTRY(native_usergs_sysret64)
+SYM_CODE_START(native_usergs_sysret64)
 	UNWIND_HINT_EMPTY
 	swapgs
 	sysretq
-END(native_usergs_sysret64)
+SYM_CODE_END(native_usergs_sysret64)
 #endif /* CONFIG_PARAVIRT */
 
 .macro TRACE_IRQS_FLAGS flags:req
@@ -142,7 +142,7 @@ END(native_usergs_sysret64)
  * with them due to bugs in both AMD and Intel CPUs.
  */
 
-ENTRY(entry_SYSCALL_64)
+SYM_CODE_START(entry_SYSCALL_64)
 	UNWIND_HINT_EMPTY
 	/*
 	 * Interrupts are off on entry.
@@ -162,7 +162,7 @@ ENTRY(entry_SYSCALL_64)
 	pushq	%r11					/* pt_regs->flags */
 	pushq	$__USER_CS				/* pt_regs->cs */
 	pushq	%rcx					/* pt_regs->ip */
-GLOBAL(entry_SYSCALL_64_after_hwframe)
+SYM_INNER_LABEL(entry_SYSCALL_64_after_hwframe, SYM_L_GLOBAL)
 	pushq	%rax					/* pt_regs->orig_ax */
 
 	PUSH_AND_CLEAR_REGS rax=$-ENOSYS
@@ -273,13 +273,13 @@ syscall_return_via_sysret:
 	popq	%rdi
 	popq	%rsp
 	USERGS_SYSRET64
-END(entry_SYSCALL_64)
+SYM_CODE_END(entry_SYSCALL_64)
 
 /*
  * %rdi: prev task
  * %rsi: next task
  */
-ENTRY(__switch_to_asm)
+SYM_CODE_START(__switch_to_asm)
 	UNWIND_HINT_FUNC
 	/*
 	 * Save callee-saved registers
@@ -321,7 +321,7 @@ ENTRY(__switch_to_asm)
 	popq	%rbp
 
 	jmp	__switch_to
-END(__switch_to_asm)
+SYM_CODE_END(__switch_to_asm)
 
 /*
  * A newly forked process directly context switches into this address.
@@ -330,7 +330,7 @@ END(__switch_to_asm)
  * rbx: kernel thread func (NULL for user thread)
  * r12: kernel thread arg
  */
-ENTRY(ret_from_fork)
+SYM_CODE_START(ret_from_fork)
 	UNWIND_HINT_EMPTY
 	movq	%rax, %rdi
 	call	schedule_tail			/* rdi: 'prev' task parameter */
@@ -357,14 +357,14 @@ ENTRY(ret_from_fork)
 	 */
 	movq	$0, RAX(%rsp)
 	jmp	2b
-END(ret_from_fork)
+SYM_CODE_END(ret_from_fork)
 
 /*
  * Build the entry stubs with some assembler magic.
  * We pack 1 stub into every 8-byte block.
  */
 	.align 8
-ENTRY(irq_entries_start)
+SYM_CODE_START(irq_entries_start)
     vector=FIRST_EXTERNAL_VECTOR
     .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
 	UNWIND_HINT_IRET_REGS
@@ -373,10 +373,10 @@ ENTRY(irq_entries_start)
 	.align	8
 	vector=vector+1
     .endr
-END(irq_entries_start)
+SYM_CODE_END(irq_entries_start)
 
 	.align 8
-ENTRY(spurious_entries_start)
+SYM_CODE_START(spurious_entries_start)
     vector=FIRST_SYSTEM_VECTOR
     .rept (NR_VECTORS - FIRST_SYSTEM_VECTOR)
 	UNWIND_HINT_IRET_REGS
@@ -385,7 +385,7 @@ ENTRY(spurious_entries_start)
 	.align	8
 	vector=vector+1
     .endr
-END(spurious_entries_start)
+SYM_CODE_END(spurious_entries_start)
 
 .macro DEBUG_ENTRY_ASSERT_IRQS_OFF
 #ifdef CONFIG_DEBUG_ENTRY
@@ -511,7 +511,7 @@ END(spurious_entries_start)
  * | return address					|
  * +----------------------------------------------------+
  */
-ENTRY(interrupt_entry)
+SYM_CODE_START(interrupt_entry)
 	UNWIND_HINT_FUNC
 	ASM_CLAC
 	cld
@@ -579,7 +579,7 @@ ENTRY(interrupt_entry)
 	TRACE_IRQS_OFF
 
 	ret
-END(interrupt_entry)
+SYM_CODE_END(interrupt_entry)
 _ASM_NOKPROBE(interrupt_entry)
 
 
@@ -589,18 +589,18 @@ _ASM_NOKPROBE(interrupt_entry)
  * The interrupt stubs push (~vector+0x80) onto the stack and
  * then jump to common_spurious/interrupt.
  */
-common_spurious:
+SYM_CODE_START_LOCAL(common_spurious)
 	addq	$-0x80, (%rsp)			/* Adjust vector to [-256, -1] range */
 	call	interrupt_entry
 	UNWIND_HINT_REGS indirect=1
 	call	smp_spurious_interrupt		/* rdi points to pt_regs */
 	jmp	ret_from_intr
-END(common_spurious)
+SYM_CODE_END(common_spurious)
 _ASM_NOKPROBE(common_spurious)
 
 /* common_interrupt is a hotpath. Align it */
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
-common_interrupt:
+SYM_CODE_START_LOCAL(common_interrupt)
 	addq	$-0x80, (%rsp)			/* Adjust vector to [-256, -1] range */
 	call	interrupt_entry
 	UNWIND_HINT_REGS indirect=1
@@ -616,12 +616,12 @@ ret_from_intr:
 	jz	retint_kernel
 
 	/* Interrupt came from user space */
-GLOBAL(retint_user)
+.Lretint_user:
 	mov	%rsp,%rdi
 	call	prepare_exit_to_usermode
 	TRACE_IRQS_IRETQ
 
-GLOBAL(swapgs_restore_regs_and_return_to_usermode)
+SYM_INNER_LABEL(swapgs_restore_regs_and_return_to_usermode, SYM_L_GLOBAL)
 #ifdef CONFIG_DEBUG_ENTRY
 	/* Assert that pt_regs indicates user mode. */
 	testb	$3, CS(%rsp)
@@ -679,7 +679,7 @@ retint_kernel:
 	 */
 	TRACE_IRQS_IRETQ
 
-GLOBAL(restore_regs_and_return_to_kernel)
+SYM_INNER_LABEL(restore_regs_and_return_to_kernel, SYM_L_GLOBAL)
 #ifdef CONFIG_DEBUG_ENTRY
 	/* Assert that pt_regs indicates kernel mode. */
 	testb	$3, CS(%rsp)
@@ -695,7 +695,7 @@ GLOBAL(restore_regs_and_return_to_kernel)
 	 */
 	INTERRUPT_RETURN
 
-ENTRY(native_iret)
+SYM_INNER_LABEL_ALIGN(native_iret, SYM_L_GLOBAL)
 	UNWIND_HINT_IRET_REGS
 	/*
 	 * Are we returning to a stack segment from the LDT?  Note: in
@@ -706,8 +706,7 @@ ENTRY(native_iret)
 	jnz	native_irq_return_ldt
 #endif
 
-.global native_irq_return_iret
-native_irq_return_iret:
+SYM_INNER_LABEL(native_irq_return_iret, SYM_L_GLOBAL)
 	/*
 	 * This may fault.  Non-paranoid faults on return to userspace are
 	 * handled by fixup_bad_iret.  These include #SS, #GP, and #NP.
@@ -789,14 +788,14 @@ native_irq_return_ldt:
 	 */
 	jmp	native_irq_return_iret
 #endif
-END(common_interrupt)
+SYM_CODE_END(common_interrupt)
 _ASM_NOKPROBE(common_interrupt)
 
 /*
  * APIC interrupts.
  */
 .macro apicinterrupt3 num sym do_sym
-ENTRY(\sym)
+SYM_CODE_START(\sym)
 	UNWIND_HINT_IRET_REGS
 	pushq	$~(\num)
 .Lcommon_\sym:
@@ -804,7 +803,7 @@ ENTRY(\sym)
 	UNWIND_HINT_REGS indirect=1
 	call	\do_sym	/* rdi points to pt_regs */
 	jmp	ret_from_intr
-END(\sym)
+SYM_CODE_END(\sym)
 _ASM_NOKPROBE(\sym)
 .endm
 
@@ -969,7 +968,7 @@ apicinterrupt IRQ_WORK_VECTOR			irq_work_interrupt		smp_irq_work_interrupt
  * #DF: if the thread stack is somehow unusable, we'll still get a useful OOPS.
  */
 .macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1 ist_offset=0 create_gap=0 read_cr2=0
-ENTRY(\sym)
+SYM_CODE_START(\sym)
 	UNWIND_HINT_IRET_REGS offset=\has_error_code*8
 
 	/* Sanity check */
@@ -1019,7 +1018,7 @@ ENTRY(\sym)
 	.endif
 
 _ASM_NOKPROBE(\sym)
-END(\sym)
+SYM_CODE_END(\sym)
 .endm
 
 idtentry divide_error			do_divide_error			has_error_code=0
@@ -1041,7 +1040,7 @@ idtentry simd_coprocessor_error		do_simd_coprocessor_error	has_error_code=0
 	 * Reload gs selector with exception handling
 	 * edi:  new selector
 	 */
-ENTRY(native_load_gs_index)
+SYM_FUNC_START(native_load_gs_index)
 	FRAME_BEGIN
 	pushfq
 	DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI)
@@ -1055,13 +1054,13 @@ ENTRY(native_load_gs_index)
 	popfq
 	FRAME_END
 	ret
-ENDPROC(native_load_gs_index)
+SYM_FUNC_END(native_load_gs_index)
 EXPORT_SYMBOL(native_load_gs_index)
 
 	_ASM_EXTABLE(.Lgs_change, .Lbad_gs)
 	.section .fixup, "ax"
 	/* running with kernelgs */
-.Lbad_gs:
+SYM_CODE_START_LOCAL_NOALIGN(.Lbad_gs)
 	SWAPGS					/* switch back to user gs */
 .macro ZAP_GS
 	/* This can't be a string because the preprocessor needs to see it. */
@@ -1072,10 +1071,11 @@ EXPORT_SYMBOL(native_load_gs_index)
 	xorl	%eax, %eax
 	movl	%eax, %gs
 	jmp	2b
+SYM_CODE_END(.Lbad_gs)
 	.previous
 
 /* Call softirq on interrupt stack. Interrupts are off. */
-ENTRY(do_softirq_own_stack)
+SYM_FUNC_START(do_softirq_own_stack)
 	pushq	%rbp
 	mov	%rsp, %rbp
 	ENTER_IRQ_STACK regs=0 old_rsp=%r11
@@ -1083,7 +1083,7 @@ ENTRY(do_softirq_own_stack)
 	LEAVE_IRQ_STACK regs=0
 	leaveq
 	ret
-ENDPROC(do_softirq_own_stack)
+SYM_FUNC_END(do_softirq_own_stack)
 
 #ifdef CONFIG_XEN_PV
 idtentry hypervisor_callback xen_do_hypervisor_callback has_error_code=0
@@ -1101,7 +1101,8 @@ idtentry hypervisor_callback xen_do_hypervisor_callback has_error_code=0
  * existing activation in its critical region -- if so, we pop the current
  * activation and restart the handler using the previous one.
  */
-ENTRY(xen_do_hypervisor_callback)		/* do_hypervisor_callback(struct *pt_regs) */
+/* do_hypervisor_callback(struct *pt_regs) */
+SYM_CODE_START_LOCAL(xen_do_hypervisor_callback)
 
 /*
  * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
@@ -1119,7 +1120,7 @@ ENTRY(xen_do_hypervisor_callback)		/* do_hypervisor_callback(struct *pt_regs) */
 	call	xen_maybe_preempt_hcall
 #endif
 	jmp	error_exit
-END(xen_do_hypervisor_callback)
+SYM_CODE_END(xen_do_hypervisor_callback)
 
 /*
  * Hypervisor uses this for application faults while it executes.
@@ -1134,7 +1135,7 @@ END(xen_do_hypervisor_callback)
  * We distinguish between categories by comparing each saved segment register
  * with its current contents: any discrepancy means we in category 1.
  */
-ENTRY(xen_failsafe_callback)
+SYM_CODE_START(xen_failsafe_callback)
 	UNWIND_HINT_EMPTY
 	movl	%ds, %ecx
 	cmpw	%cx, 0x10(%rsp)
@@ -1164,7 +1165,7 @@ ENTRY(xen_failsafe_callback)
 	PUSH_AND_CLEAR_REGS
 	ENCODE_FRAME_POINTER
 	jmp	error_exit
-END(xen_failsafe_callback)
+SYM_CODE_END(xen_failsafe_callback)
 #endif /* CONFIG_XEN_PV */
 
 #ifdef CONFIG_XEN_PVHVM
@@ -1214,7 +1215,7 @@ idtentry machine_check		do_mce			has_error_code=0	paranoid=1
  * Use slow, but surefire "are we in kernel?" check.
  * Return: ebx=0: need swapgs on exit, ebx=1: otherwise
  */
-ENTRY(paranoid_entry)
+SYM_CODE_START_LOCAL(paranoid_entry)
 	UNWIND_HINT_FUNC
 	cld
 	PUSH_AND_CLEAR_REGS save_ret=1
@@ -1248,7 +1249,7 @@ ENTRY(paranoid_entry)
 	FENCE_SWAPGS_KERNEL_ENTRY
 
 	ret
-END(paranoid_entry)
+SYM_CODE_END(paranoid_entry)
 
 /*
  * "Paranoid" exit path from exception stack.  This is invoked
@@ -1262,7 +1263,7 @@ END(paranoid_entry)
  *
  * On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it)
  */
-ENTRY(paranoid_exit)
+SYM_CODE_START_LOCAL(paranoid_exit)
 	UNWIND_HINT_REGS
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF_DEBUG
@@ -1272,19 +1273,18 @@ ENTRY(paranoid_exit)
 	/* Always restore stashed CR3 value (see paranoid_entry) */
 	RESTORE_CR3	scratch_reg=%rbx save_reg=%r14
 	SWAPGS_UNSAFE_STACK
-	jmp	.Lparanoid_exit_restore
+	jmp	restore_regs_and_return_to_kernel
 .Lparanoid_exit_no_swapgs:
 	TRACE_IRQS_IRETQ_DEBUG
 	/* Always restore stashed CR3 value (see paranoid_entry) */
 	RESTORE_CR3	scratch_reg=%rbx save_reg=%r14
-.Lparanoid_exit_restore:
 	jmp restore_regs_and_return_to_kernel
-END(paranoid_exit)
+SYM_CODE_END(paranoid_exit)
 
 /*
  * Save all registers in pt_regs, and switch GS if needed.
  */
-ENTRY(error_entry)
+SYM_CODE_START_LOCAL(error_entry)
 	UNWIND_HINT_FUNC
 	cld
 	PUSH_AND_CLEAR_REGS save_ret=1
@@ -1364,16 +1364,16 @@ ENTRY(error_entry)
 	call	fixup_bad_iret
 	mov	%rax, %rsp
 	jmp	.Lerror_entry_from_usermode_after_swapgs
-END(error_entry)
+SYM_CODE_END(error_entry)
 
-ENTRY(error_exit)
+SYM_CODE_START_LOCAL(error_exit)
 	UNWIND_HINT_REGS
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF
 	testb	$3, CS(%rsp)
 	jz	retint_kernel
-	jmp	retint_user
-END(error_exit)
+	jmp	.Lretint_user
+SYM_CODE_END(error_exit)
 
 /*
  * Runs on exception stack.  Xen PV does not go through this path at all,
@@ -1383,7 +1383,7 @@ END(error_exit)
  *	%r14: Used to save/restore the CR3 of the interrupted context
  *	      when PAGE_TABLE_ISOLATION is in use.  Do not clobber.
  */
-ENTRY(nmi)
+SYM_CODE_START(nmi)
 	UNWIND_HINT_IRET_REGS
 
 	/*
@@ -1718,21 +1718,21 @@ nmi_restore:
 	 * about espfix64 on the way back to kernel mode.
 	 */
 	iretq
-END(nmi)
+SYM_CODE_END(nmi)
 
 #ifndef CONFIG_IA32_EMULATION
 /*
  * This handles SYSCALL from 32-bit code.  There is no way to program
  * MSRs to fully disable 32-bit SYSCALL.
  */
-ENTRY(ignore_sysret)
+SYM_CODE_START(ignore_sysret)
 	UNWIND_HINT_EMPTY
 	mov	$-ENOSYS, %eax
 	sysret
-END(ignore_sysret)
+SYM_CODE_END(ignore_sysret)
 #endif
 
-ENTRY(rewind_stack_do_exit)
+SYM_CODE_START(rewind_stack_do_exit)
 	UNWIND_HINT_FUNC
 	/* Prevent any naive code from trying to unwind to our caller. */
 	xorl	%ebp, %ebp
@@ -1742,4 +1742,4 @@ ENTRY(rewind_stack_do_exit)
 	UNWIND_HINT_FUNC sp_offset=PTREGS_SIZE
 
 	call	do_exit
-END(rewind_stack_do_exit)
+SYM_CODE_END(rewind_stack_do_exit)
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
index 39913770a44d..f1d3ccae5dd5 100644
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -46,7 +46,7 @@
  * ebp  user stack
  * 0(%ebp) arg6
  */
-ENTRY(entry_SYSENTER_compat)
+SYM_FUNC_START(entry_SYSENTER_compat)
 	/* Interrupts are off on entry. */
 	SWAPGS
 
@@ -146,8 +146,8 @@ ENTRY(entry_SYSENTER_compat)
 	pushq	$X86_EFLAGS_FIXED
 	popfq
 	jmp	.Lsysenter_flags_fixed
-GLOBAL(__end_entry_SYSENTER_compat)
-ENDPROC(entry_SYSENTER_compat)
+SYM_INNER_LABEL(__end_entry_SYSENTER_compat, SYM_L_GLOBAL)
+SYM_FUNC_END(entry_SYSENTER_compat)
 
 /*
  * 32-bit SYSCALL entry.
@@ -196,7 +196,7 @@ ENDPROC(entry_SYSENTER_compat)
  * esp  user stack
  * 0(%esp) arg6
  */
-ENTRY(entry_SYSCALL_compat)
+SYM_CODE_START(entry_SYSCALL_compat)
 	/* Interrupts are off on entry. */
 	swapgs
 
@@ -215,7 +215,7 @@ ENTRY(entry_SYSCALL_compat)
 	pushq	%r11			/* pt_regs->flags */
 	pushq	$__USER32_CS		/* pt_regs->cs */
 	pushq	%rcx			/* pt_regs->ip */
-GLOBAL(entry_SYSCALL_compat_after_hwframe)
+SYM_INNER_LABEL(entry_SYSCALL_compat_after_hwframe, SYM_L_GLOBAL)
 	movl	%eax, %eax		/* discard orig_ax high bits */
 	pushq	%rax			/* pt_regs->orig_ax */
 	pushq	%rdi			/* pt_regs->di */
@@ -311,7 +311,7 @@ sysret32_from_system_call:
 	xorl	%r10d, %r10d
 	swapgs
 	sysretl
-END(entry_SYSCALL_compat)
+SYM_CODE_END(entry_SYSCALL_compat)
 
 /*
  * 32-bit legacy system call entry.
@@ -339,7 +339,7 @@ END(entry_SYSCALL_compat)
  * edi  arg5
  * ebp  arg6
  */
-ENTRY(entry_INT80_compat)
+SYM_CODE_START(entry_INT80_compat)
 	/*
 	 * Interrupts are off on entry.
 	 */
@@ -416,4 +416,4 @@ ENTRY(entry_INT80_compat)
 	/* Go back to user mode. */
 	TRACE_IRQS_ON
 	jmp	swapgs_restore_regs_and_return_to_usermode
-END(entry_INT80_compat)
+SYM_CODE_END(entry_INT80_compat)
diff --git a/arch/x86/entry/thunk_32.S b/arch/x86/entry/thunk_32.S
index 2713490611a3..e010d4ae11f1 100644
--- a/arch/x86/entry/thunk_32.S
+++ b/arch/x86/entry/thunk_32.S
@@ -10,8 +10,7 @@
 
 	/* put return address in eax (arg1) */
 	.macro THUNK name, func, put_ret_addr_in_eax=0
-	.globl \name
-\name:
+SYM_CODE_START_NOALIGN(\name)
 	pushl %eax
 	pushl %ecx
 	pushl %edx
@@ -27,6 +26,7 @@
 	popl %eax
 	ret
 	_ASM_NOKPROBE(\name)
+SYM_CODE_END(\name)
 	.endm
 
 #ifdef CONFIG_TRACE_IRQFLAGS
diff --git a/arch/x86/entry/thunk_64.S b/arch/x86/entry/thunk_64.S
index ea5c4167086c..c5c3b6e86e62 100644
--- a/arch/x86/entry/thunk_64.S
+++ b/arch/x86/entry/thunk_64.S
@@ -12,7 +12,7 @@
 
 	/* rdi:	arg1 ... normal C conventions. rax is saved/restored. */
 	.macro THUNK name, func, put_ret_addr_in_rdi=0
-	ENTRY(\name)
+SYM_FUNC_START_NOALIGN(\name)
 	pushq %rbp
 	movq %rsp, %rbp
 
@@ -33,7 +33,7 @@
 
 	call \func
 	jmp  .L_restore
-	ENDPROC(\name)
+SYM_FUNC_END(\name)
 	_ASM_NOKPROBE(\name)
 	.endm
 
@@ -56,7 +56,7 @@
 #if defined(CONFIG_TRACE_IRQFLAGS) \
  || defined(CONFIG_DEBUG_LOCK_ALLOC) \
  || defined(CONFIG_PREEMPTION)
-.L_restore:
+SYM_CODE_START_LOCAL_NOALIGN(.L_restore)
 	popq %r11
 	popq %r10
 	popq %r9
@@ -69,4 +69,5 @@
 	popq %rbp
 	ret
 	_ASM_NOKPROBE(.L_restore)
+SYM_CODE_END(.L_restore)
 #endif
diff --git a/arch/x86/entry/vdso/Makefile b/arch/x86/entry/vdso/Makefile
index 0f2154106d01..2b75e80f6b41 100644
--- a/arch/x86/entry/vdso/Makefile
+++ b/arch/x86/entry/vdso/Makefile
@@ -87,11 +87,9 @@ $(vobjs): KBUILD_CFLAGS := $(filter-out $(GCC_PLUGINS_CFLAGS) $(RETPOLINE_CFLAGS
 #
 # vDSO code runs in userspace and -pg doesn't help with profiling anyway.
 #
-CFLAGS_REMOVE_vdso-note.o = -pg
 CFLAGS_REMOVE_vclock_gettime.o = -pg
 CFLAGS_REMOVE_vdso32/vclock_gettime.o = -pg
 CFLAGS_REMOVE_vgetcpu.o = -pg
-CFLAGS_REMOVE_vvar.o = -pg
 
 #
 # X32 processes use x32 vDSO to access 64bit kernel data.
diff --git a/arch/x86/entry/vdso/vdso32/system_call.S b/arch/x86/entry/vdso/vdso32/system_call.S
index 263d7433dea8..de1fff7188aa 100644
--- a/arch/x86/entry/vdso/vdso32/system_call.S
+++ b/arch/x86/entry/vdso/vdso32/system_call.S
@@ -62,7 +62,7 @@ __kernel_vsyscall:
 
 	/* Enter using int $0x80 */
 	int	$0x80
-GLOBAL(int80_landing_pad)
+SYM_INNER_LABEL(int80_landing_pad, SYM_L_GLOBAL)
 
 	/*
 	 * Restore EDX and ECX in case they were clobbered.  EBP is not