diff options
author | Ingo Molnar <mingo@kernel.org> | 2018-03-12 12:10:03 +0100 |
---|---|---|
committer | Ingo Molnar <mingo@kernel.org> | 2018-03-12 12:10:03 +0100 |
commit | 3c76db70eb70a0fbd40b3e0dec8f69ca344d1ff8 (patch) | |
tree | a9dd314ac18992cdc2c50d4de60535a1b76ee351 /arch/x86/entry/entry_64.S | |
parent | 194a9749c73d650c0b1dfdee04fb0bdf0a888ba8 (diff) | |
parent | 7958b2246fadf54b7ff820a2a5a2c5ca1554716f (diff) | |
download | linux-3c76db70eb70a0fbd40b3e0dec8f69ca344d1ff8.tar.bz2 |
Merge branch 'x86/pti' into x86/mm, to pick up dependencies
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Diffstat (limited to 'arch/x86/entry/entry_64.S')
-rw-r--r-- | arch/x86/entry/entry_64.S | 153 |
1 files changed, 92 insertions, 61 deletions
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S index c9e55b89f03a..8a78030a82f2 100644 --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -369,8 +369,7 @@ ENTRY(__switch_to_asm) * exist, overwrite the RSB with entries which capture * speculative execution to prevent attack. */ - /* Clobbers %rbx */ - FILL_RETURN_BUFFER RSB_CLEAR_LOOPS, X86_FEATURE_RSB_CTXSW + FILL_RETURN_BUFFER %r12, RSB_CLEAR_LOOPS, X86_FEATURE_RSB_CTXSW #endif /* restore callee-saved registers */ @@ -454,9 +453,19 @@ END(irq_entries_start) * * The invariant is that, if irq_count != -1, then the IRQ stack is in use. */ -.macro ENTER_IRQ_STACK regs=1 old_rsp +.macro ENTER_IRQ_STACK regs=1 old_rsp save_ret=0 DEBUG_ENTRY_ASSERT_IRQS_OFF + + .if \save_ret + /* + * If save_ret is set, the original stack contains one additional + * entry -- the return address. Therefore, move the address one + * entry below %rsp to \old_rsp. + */ + leaq 8(%rsp), \old_rsp + .else movq %rsp, \old_rsp + .endif .if \regs UNWIND_HINT_REGS base=\old_rsp @@ -502,6 +511,15 @@ END(irq_entries_start) .if \regs UNWIND_HINT_REGS indirect=1 .endif + + .if \save_ret + /* + * Push the return address to the stack. This return address can + * be found at the "real" original RSP, which was offset by 8 at + * the beginning of this macro. + */ + pushq -8(\old_rsp) + .endif .endm /* @@ -525,27 +543,65 @@ END(irq_entries_start) .endm /* - * Interrupt entry/exit. - * - * Interrupt entry points save only callee clobbered registers in fast path. + * Interrupt entry helper function. * - * Entry runs with interrupts off. + * Entry runs with interrupts off. Stack layout at entry: + * +----------------------------------------------------+ + * | regs->ss | + * | regs->rsp | + * | regs->eflags | + * | regs->cs | + * | regs->ip | + * +----------------------------------------------------+ + * | regs->orig_ax = ~(interrupt number) | + * +----------------------------------------------------+ + * | return address | + * +----------------------------------------------------+ */ - -/* 0(%rsp): ~(interrupt number) */ - .macro interrupt func +ENTRY(interrupt_entry) + UNWIND_HINT_FUNC + ASM_CLAC cld - testb $3, CS-ORIG_RAX(%rsp) + testb $3, CS-ORIG_RAX+8(%rsp) jz 1f SWAPGS - call switch_to_thread_stack + + /* + * Switch to the thread stack. The IRET frame and orig_ax are + * on the stack, as well as the return address. RDI..R12 are + * not (yet) on the stack and space has not (yet) been + * allocated for them. + */ + pushq %rdi + + /* Need to switch before accessing the thread stack. */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi + movq %rsp, %rdi + movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp + + /* + * We have RDI, return address, and orig_ax on the stack on + * top of the IRET frame. That means offset=24 + */ + UNWIND_HINT_IRET_REGS base=%rdi offset=24 + + pushq 7*8(%rdi) /* regs->ss */ + pushq 6*8(%rdi) /* regs->rsp */ + pushq 5*8(%rdi) /* regs->eflags */ + pushq 4*8(%rdi) /* regs->cs */ + pushq 3*8(%rdi) /* regs->ip */ + pushq 2*8(%rdi) /* regs->orig_ax */ + pushq 8(%rdi) /* return address */ + UNWIND_HINT_FUNC + + movq (%rdi), %rdi 1: - PUSH_AND_CLEAR_REGS - ENCODE_FRAME_POINTER + PUSH_AND_CLEAR_REGS save_ret=1 + ENCODE_FRAME_POINTER 8 - testb $3, CS(%rsp) + testb $3, CS+8(%rsp) jz 1f /* @@ -553,7 +609,7 @@ END(irq_entries_start) * * We need to tell lockdep that IRQs are off. We can't do this until * we fix gsbase, and we should do it before enter_from_user_mode - * (which can take locks). Since TRACE_IRQS_OFF idempotent, + * (which can take locks). Since TRACE_IRQS_OFF is idempotent, * the simplest way to handle it is to just call it twice if * we enter from user mode. There's no reason to optimize this since * TRACE_IRQS_OFF is a no-op if lockdep is off. @@ -563,12 +619,15 @@ END(irq_entries_start) CALL_enter_from_user_mode 1: - ENTER_IRQ_STACK old_rsp=%rdi + ENTER_IRQ_STACK old_rsp=%rdi save_ret=1 /* We entered an interrupt context - irqs are off: */ TRACE_IRQS_OFF - call \func /* rdi points to pt_regs */ - .endm + ret +END(interrupt_entry) + + +/* Interrupt entry/exit. */ /* * The interrupt stubs push (~vector+0x80) onto the stack and @@ -576,9 +635,10 @@ END(irq_entries_start) */ .p2align CONFIG_X86_L1_CACHE_SHIFT common_interrupt: - ASM_CLAC addq $-0x80, (%rsp) /* Adjust vector to [-256, -1] range */ - interrupt do_IRQ + call interrupt_entry + UNWIND_HINT_REGS indirect=1 + call do_IRQ /* rdi points to pt_regs */ /* 0(%rsp): old RSP */ ret_from_intr: DISABLE_INTERRUPTS(CLBR_ANY) @@ -771,10 +831,11 @@ END(common_interrupt) .macro apicinterrupt3 num sym do_sym ENTRY(\sym) UNWIND_HINT_IRET_REGS - ASM_CLAC pushq $~(\num) .Lcommon_\sym: - interrupt \do_sym + call interrupt_entry + UNWIND_HINT_REGS indirect=1 + call \do_sym /* rdi points to pt_regs */ jmp ret_from_intr END(\sym) .endm @@ -837,34 +898,6 @@ apicinterrupt IRQ_WORK_VECTOR irq_work_interrupt smp_irq_work_interrupt */ #define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss_rw) + (TSS_ist + ((x) - 1) * 8) -/* - * Switch to the thread stack. This is called with the IRET frame and - * orig_ax on the stack. (That is, RDI..R12 are not on the stack and - * space has not been allocated for them.) - */ -ENTRY(switch_to_thread_stack) - UNWIND_HINT_FUNC - - pushq %rdi - /* Need to switch before accessing the thread stack. */ - SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi - movq %rsp, %rdi - movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp - UNWIND_HINT sp_offset=16 sp_reg=ORC_REG_DI - - pushq 7*8(%rdi) /* regs->ss */ - pushq 6*8(%rdi) /* regs->rsp */ - pushq 5*8(%rdi) /* regs->eflags */ - pushq 4*8(%rdi) /* regs->cs */ - pushq 3*8(%rdi) /* regs->ip */ - pushq 2*8(%rdi) /* regs->orig_ax */ - pushq 8(%rdi) /* return address */ - UNWIND_HINT_FUNC - - movq (%rdi), %rdi - ret -END(switch_to_thread_stack) - .macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1 ENTRY(\sym) UNWIND_HINT_IRET_REGS offset=\has_error_code*8 @@ -880,12 +913,8 @@ ENTRY(\sym) pushq $-1 /* ORIG_RAX: no syscall to restart */ .endif - /* Save all registers in pt_regs */ - PUSH_AND_CLEAR_REGS - ENCODE_FRAME_POINTER - .if \paranoid < 2 - testb $3, CS(%rsp) /* If coming from userspace, switch stacks */ + testb $3, CS-ORIG_RAX(%rsp) /* If coming from userspace, switch stacks */ jnz .Lfrom_usermode_switch_stack_\@ .endif @@ -1135,13 +1164,15 @@ idtentry machine_check do_mce has_error_code=0 paranoid=1 #endif /* - * Switch gs if needed. + * Save all registers in pt_regs, and switch gs if needed. * Use slow, but surefire "are we in kernel?" check. * Return: ebx=0: need swapgs on exit, ebx=1: otherwise */ ENTRY(paranoid_entry) UNWIND_HINT_FUNC cld + PUSH_AND_CLEAR_REGS save_ret=1 + ENCODE_FRAME_POINTER 8 movl $1, %ebx movl $MSR_GS_BASE, %ecx rdmsr @@ -1186,12 +1217,14 @@ ENTRY(paranoid_exit) END(paranoid_exit) /* - * Switch gs if needed. + * Save all registers in pt_regs, and switch GS if needed. * Return: EBX=0: came from user mode; EBX=1: otherwise */ ENTRY(error_entry) - UNWIND_HINT_REGS offset=8 + UNWIND_HINT_FUNC cld + PUSH_AND_CLEAR_REGS save_ret=1 + ENCODE_FRAME_POINTER 8 testb $3, CS+8(%rsp) jz .Lerror_kernelspace @@ -1582,8 +1615,6 @@ end_repeat_nmi: * frame to point back to repeat_nmi. */ pushq $-1 /* ORIG_RAX: no syscall to restart */ - PUSH_AND_CLEAR_REGS - ENCODE_FRAME_POINTER /* * Use paranoid_entry to handle SWAPGS, but no need to use paranoid_exit |