Merge tag 'v4.18' into rdma.git for-next

Resolve merge conflicts from the -rc cycle against the rdma.git tree:

Conflicts:
 drivers/infiniband/core/uverbs_cmd.c
  - New ifs added to ib_uverbs_ex_create_flow in -rc and for-next
  - Merge removal of file->ucontext in for-next with new code in -rc
 drivers/infiniband/core/uverbs_main.c
  - for-next removed code from ib_uverbs_write() that was modified
    in for-rc

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

3 files changed, 64 insertions, 29 deletions

diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index fa42f895fdde..169c2feda14a 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -106,9 +106,13 @@ define cmd_check_data_rel
 	done
 endef
 
+# We need to run two commands under "if_changed", so merge them into a
+# single invocation.
+quiet_cmd_check-and-link-vmlinux = LD      $@
+      cmd_check-and-link-vmlinux = $(cmd_check_data_rel); $(cmd_ld)
+
 $(obj)/vmlinux: $(vmlinux-objs-y) FORCE
-	$(call if_changed,check_data_rel)
-	$(call if_changed,ld)
+	$(call if_changed,check-and-link-vmlinux)
 
 OBJCOPYFLAGS_vmlinux.bin :=  -R .comment -S
 $(obj)/vmlinux.bin: vmlinux FORCE
diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index a8a8642d2b0b..e98522ea6f09 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -114,18 +114,12 @@ __setup_efi_pci(efi_pci_io_protocol_t *pci, struct pci_setup_rom **__rom)
 	struct pci_setup_rom *rom = NULL;
 	efi_status_t status;
 	unsigned long size;
-	uint64_t attributes, romsize;
+	uint64_t romsize;
 	void *romimage;
 
-	status = efi_call_proto(efi_pci_io_protocol, attributes, pci,
-				EfiPciIoAttributeOperationGet, 0, 0,
-				&attributes);
-	if (status != EFI_SUCCESS)
-		return status;
-
 	/*
-	 * Some firmware images contain EFI function pointers at the place where the
-	 * romimage and romsize fields are supposed to be. Typically the EFI
+	 * Some firmware images contain EFI function pointers at the place where
+	 * the romimage and romsize fields are supposed to be. Typically the EFI
 	 * code is mapped at high addresses, translating to an unrealistically
 	 * large romsize. The UEFI spec limits the size of option ROMs to 16
 	 * MiB so we reject any ROMs over 16 MiB in size to catch this.
diff --git a/arch/x86/boot/compressed/pgtable_64.c b/arch/x86/boot/compressed/pgtable_64.c
index 8c5107545251..9e2157371491 100644
--- a/arch/x86/boot/compressed/pgtable_64.c
+++ b/arch/x86/boot/compressed/pgtable_64.c
@@ -1,3 +1,4 @@
+#include <asm/e820/types.h>
 #include <asm/processor.h>
 #include "pgtable.h"
 #include "../string.h"
@@ -34,10 +35,62 @@ unsigned long *trampoline_32bit __section(.data);
 extern struct boot_params *boot_params;
 int cmdline_find_option_bool(const char *option);
 
+static unsigned long find_trampoline_placement(void)
+{
+	unsigned long bios_start, ebda_start;
+	unsigned long trampoline_start;
+	struct boot_e820_entry *entry;
+	int i;
+
+	/*
+	 * Find a suitable spot for the trampoline.
+	 * This code is based on reserve_bios_regions().
+	 */
+
+	ebda_start = *(unsigned short *)0x40e << 4;
+	bios_start = *(unsigned short *)0x413 << 10;
+
+	if (bios_start < BIOS_START_MIN || bios_start > BIOS_START_MAX)
+		bios_start = BIOS_START_MAX;
+
+	if (ebda_start > BIOS_START_MIN && ebda_start < bios_start)
+		bios_start = ebda_start;
+
+	bios_start = round_down(bios_start, PAGE_SIZE);
+
+	/* Find the first usable memory region under bios_start. */
+	for (i = boot_params->e820_entries - 1; i >= 0; i--) {
+		entry = &boot_params->e820_table[i];
+
+		/* Skip all entries above bios_start. */
+		if (bios_start <= entry->addr)
+			continue;
+
+		/* Skip non-RAM entries. */
+		if (entry->type != E820_TYPE_RAM)
+			continue;
+
+		/* Adjust bios_start to the end of the entry if needed. */
+		if (bios_start > entry->addr + entry->size)
+			bios_start = entry->addr + entry->size;
+
+		/* Keep bios_start page-aligned. */
+		bios_start = round_down(bios_start, PAGE_SIZE);
+
+		/* Skip the entry if it's too small. */
+		if (bios_start - TRAMPOLINE_32BIT_SIZE < entry->addr)
+			continue;
+
+		break;
+	}
+
+	/* Place the trampoline just below the end of low memory */
+	return bios_start - TRAMPOLINE_32BIT_SIZE;
+}
+
 struct paging_config paging_prepare(void *rmode)
 {
 	struct paging_config paging_config = {};
-	unsigned long bios_start, ebda_start;
 
 	/* Initialize boot_params. Required for cmdline_find_option_bool(). */
 	boot_params = rmode;
@@ -61,23 +114,7 @@ struct paging_config paging_prepare(void *rmode)
 		paging_config.l5_required = 1;
 	}
 
-	/*
-	 * Find a suitable spot for the trampoline.
-	 * This code is based on reserve_bios_regions().
-	 */
-
-	ebda_start = *(unsigned short *)0x40e << 4;
-	bios_start = *(unsigned short *)0x413 << 10;
-
-	if (bios_start < BIOS_START_MIN || bios_start > BIOS_START_MAX)
-		bios_start = BIOS_START_MAX;
-
-	if (ebda_start > BIOS_START_MIN && ebda_start < bios_start)
-		bios_start = ebda_start;
-
-	/* Place the trampoline just below the end of low memory, aligned to 4k */
-	paging_config.trampoline_start = bios_start - TRAMPOLINE_32BIT_SIZE;
-	paging_config.trampoline_start = round_down(paging_config.trampoline_start, PAGE_SIZE);
+	paging_config.trampoline_start = find_trampoline_placement();
 
 	trampoline_32bit = (unsigned long *)paging_config.trampoline_start;