summaryrefslogtreecommitdiffstats
path: root/arch/um
diff options
context:
space:
mode:
authorAl Viro <viro@ftp.linux.org.uk>2011-08-18 20:13:00 +0100
committerRichard Weinberger <richard@nod.at>2011-11-02 14:15:29 +0100
commitd805a78603bb489d71a12466e8f29c5e9837e50a (patch)
tree12d7273a3cbd4f28e833232e9d884b6c3b7f904e /arch/um
parentbad3118fcdeb4b7b5bf18cb40b2548cf891646b2 (diff)
downloadlinux-d805a78603bb489d71a12466e8f29c5e9837e50a.tar.bz2
um: clean Kconfig up a bit
* kill duplicates with drivers/char/Kconfig * take watchdog one into drivers/watchdog/Kconfig * take mmapper to arch/um/Kconfig.um * rename Kconfig.char menu to "UML Character Devices" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
Diffstat (limited to 'arch/um')
-rw-r--r--arch/um/Kconfig.char114
-rw-r--r--arch/um/Kconfig.um6
2 files changed, 7 insertions, 113 deletions
diff --git a/arch/um/Kconfig.char b/arch/um/Kconfig.char
index 70dabd1e0652..b9d7c4276682 100644
--- a/arch/um/Kconfig.char
+++ b/arch/um/Kconfig.char
@@ -1,5 +1,4 @@
-
-menu "Character Devices"
+menu "UML Character Devices"
config STDERR_CONSOLE
bool "stderr console"
@@ -105,92 +104,6 @@ config SSL_CHAN
this if you expect the UML that you build to be run in environments
which don't have a set of /dev/pty* devices.
-config UNIX98_PTYS
- bool "Unix98 PTY support"
- help
- A pseudo terminal (PTY) is a software device consisting of two
- halves: a master and a slave. The slave device behaves identical to
- a physical terminal; the master device is used by a process to
- read data from and write data to the slave, thereby emulating a
- terminal. Typical programs for the master side are telnet servers
- and xterms.
-
- Linux has traditionally used the BSD-like names /dev/ptyxx for
- masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
- has a number of problems. The GNU C library glibc 2.1 and later,
- however, supports the Unix98 naming standard: in order to acquire a
- pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
- terminal is then made available to the process and the pseudo
- terminal slave can be accessed as /dev/pts/<number>. What was
- traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
-
- All modern Linux systems use the Unix98 ptys. Say Y unless
- you're on an embedded system and want to conserve memory.
-
-config LEGACY_PTYS
- bool "Legacy (BSD) PTY support"
- default y
- help
- A pseudo terminal (PTY) is a software device consisting of two
- halves: a master and a slave. The slave device behaves identical to
- a physical terminal; the master device is used by a process to
- read data from and write data to the slave, thereby emulating a
- terminal. Typical programs for the master side are telnet servers
- and xterms.
-
- Linux has traditionally used the BSD-like names /dev/ptyxx
- for masters and /dev/ttyxx for slaves of pseudo
- terminals. This scheme has a number of problems, including
- security. This option enables these legacy devices; on most
- systems, it is safe to say N.
-
-config RAW_DRIVER
- tristate "RAW driver (/dev/raw/rawN)"
- depends on BLOCK
- help
- The raw driver permits block devices to be bound to /dev/raw/rawN.
- Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
- See the raw(8) manpage for more details.
-
- Applications should preferably open the device (eg /dev/hda1)
- with the O_DIRECT flag.
-
-config MAX_RAW_DEVS
- int "Maximum number of RAW devices to support (1-8192)"
- depends on RAW_DRIVER
- default "256"
- help
- The maximum number of RAW devices that are supported.
- Default is 256. Increase this number in case you need lots of
- raw devices.
-
-config LEGACY_PTY_COUNT
- int "Maximum number of legacy PTY in use"
- depends on LEGACY_PTYS
- default "256"
- help
- The maximum number of legacy PTYs that can be used at any one time.
- The default is 256, and should be more than enough. Embedded
- systems may want to reduce this to save memory.
-
- When not in use, each legacy PTY occupies 12 bytes on 32-bit
- architectures and 24 bytes on 64-bit architectures.
-
-config WATCHDOG
- bool "Watchdog Timer Support"
-
-config WATCHDOG_NOWAYOUT
- bool "Disable watchdog shutdown on close"
- depends on WATCHDOG
-
-config SOFT_WATCHDOG
- tristate "Software Watchdog"
- depends on WATCHDOG
-
-config UML_WATCHDOG
- tristate "UML watchdog"
- depends on WATCHDOG
-
config UML_SOUND
tristate "Sound support"
help
@@ -211,29 +124,4 @@ config HOSTAUDIO
tristate
default UML_SOUND
-#It is selected elsewhere, so kconfig would warn without this.
-config HW_RANDOM
- tristate
- default n
-
-config UML_RANDOM
- tristate "Hardware random number generator"
- help
- This option enables UML's "hardware" random number generator. It
- attaches itself to the host's /dev/random, supplying as much entropy
- as the host has, rather than the small amount the UML gets from its
- own drivers. It registers itself as a standard hardware random number
- generator, major 10, minor 183, and the canonical device name is
- /dev/hwrng.
- The way to make use of this is to install the rng-tools package
- (check your distro, or download from
- http://sourceforge.net/projects/gkernel/). rngd periodically reads
- /dev/hwrng and injects the entropy into /dev/random.
-
-config MMAPPER
- tristate "iomem emulation driver"
- help
- This driver allows a host file to be used as emulated IO memory inside
- UML.
-
endmenu
diff --git a/arch/um/Kconfig.um b/arch/um/Kconfig.um
index b5e675e370c6..70fd690964e4 100644
--- a/arch/um/Kconfig.um
+++ b/arch/um/Kconfig.um
@@ -148,5 +148,11 @@ config KERNEL_STACK_ORDER
be 1 << order pages. The default is OK unless you're running Valgrind
on UML, in which case, set this to 3.
+config MMAPPER
+ tristate "iomem emulation driver"
+ help
+ This driver allows a host file to be used as emulated IO memory inside
+ UML.
+
config NO_DMA
def_bool y