summaryrefslogtreecommitdiffstats
path: root/arch/tile
diff options
context:
space:
mode:
authorChris Metcalf <cmetcalf@tilera.com>2012-03-30 15:47:38 -0400
committerChris Metcalf <cmetcalf@tilera.com>2012-04-02 12:13:53 -0400
commit54229ff359250ce7292dbeb59f157a2d3b67e30c (patch)
treedff9b36a7097c4606e2133610fa97426cf3dbcff /arch/tile
parentab306cae660e524edbeb8889e4e23d3c97717b9c (diff)
downloadlinux-54229ff359250ce7292dbeb59f157a2d3b67e30c.tar.bz2
arch/tile: fix finv_buffer_remote() for tilegx
There were some correctness issues with this code that are now fixed with this change. The change is likely less performant than it could be, but it should no longer be vulnerable to any races with memory operations on the memory network while invalidating a range of memory. This code is run infrequently so performance isn't critical, but correctness definitely is. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Diffstat (limited to 'arch/tile')
-rw-r--r--arch/tile/lib/cacheflush.c28
1 files changed, 26 insertions, 2 deletions
diff --git a/arch/tile/lib/cacheflush.c b/arch/tile/lib/cacheflush.c
index 6af2b97a6886..db4fb89e12d8 100644
--- a/arch/tile/lib/cacheflush.c
+++ b/arch/tile/lib/cacheflush.c
@@ -39,7 +39,21 @@ void finv_buffer_remote(void *buffer, size_t size, int hfh)
{
char *p, *base;
size_t step_size, load_count;
+
+ /*
+ * On TILEPro the striping granularity is a fixed 8KB; on
+ * TILE-Gx it is configurable, and we rely on the fact that
+ * the hypervisor always configures maximum striping, so that
+ * bits 9 and 10 of the PA are part of the stripe function, so
+ * every 512 bytes we hit a striping boundary.
+ *
+ */
+#ifdef __tilegx__
+ const unsigned long STRIPE_WIDTH = 512;
+#else
const unsigned long STRIPE_WIDTH = 8192;
+#endif
+
#ifdef __tilegx__
/*
* On TILE-Gx, we must disable the dstream prefetcher before doing
@@ -74,7 +88,7 @@ void finv_buffer_remote(void *buffer, size_t size, int hfh)
* memory, that one load would be sufficient, but since we may
* be, we also need to back up to the last load issued to
* another memory controller, which would be the point where
- * we crossed an 8KB boundary (the granularity of striping
+ * we crossed a "striping" boundary (the granularity of striping
* across memory controllers). Keep backing up and doing this
* until we are before the beginning of the buffer, or have
* hit all the controllers.
@@ -88,12 +102,22 @@ void finv_buffer_remote(void *buffer, size_t size, int hfh)
* every cache line on a full memory stripe on each
* controller" that we simply do that, to simplify the logic.
*
- * FIXME: See bug 9535 for some issues with this code.
+ * On TILE-Gx the hash-for-home function is much more complex,
+ * with the upshot being we can't readily guarantee we have
+ * hit both entries in the 128-entry AMT that were hit by any
+ * load in the entire range, so we just re-load them all.
+ * With larger buffers, we may want to consider using a hypervisor
+ * trap to issue loads directly to each hash-for-home tile for
+ * each controller (doing it from Linux would trash the TLB).
*/
if (hfh) {
step_size = L2_CACHE_BYTES;
+#ifdef __tilegx__
+ load_count = (size + L2_CACHE_BYTES - 1) / L2_CACHE_BYTES;
+#else
load_count = (STRIPE_WIDTH / L2_CACHE_BYTES) *
(1 << CHIP_LOG_NUM_MSHIMS());
+#endif
} else {
step_size = STRIPE_WIDTH;
load_count = (1 << CHIP_LOG_NUM_MSHIMS());