tile: remove support for TILE64

This chip is no longer being actively developed for (it was superceded
by the TILEPro64 in 2008), and in any case the existing compiler and
toolchain in the community do not support it.  It's unlikely that the
kernel works with TILE64 at this point as the configuration has not been
tested in years.  The support is also awkward as it requires maintaining
a significant number of ifdefs.  So, just remove it altogether.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

1 files changed, 0 insertions, 61 deletions

diff --git a/arch/tile/lib/memcpy_32.S b/arch/tile/lib/memcpy_32.S
index 8ba7626cfeb1..a2771ae5da53 100644
--- a/arch/tile/lib/memcpy_32.S
+++ b/arch/tile/lib/memcpy_32.S
@@ -22,14 +22,6 @@
 
 #include <linux/linkage.h>
 
-/* On TILE64, we wrap these functions via arch/tile/lib/memcpy_tile64.c */
-#if !CHIP_HAS_COHERENT_LOCAL_CACHE()
-#define memcpy __memcpy_asm
-#define __copy_to_user_inatomic __copy_to_user_inatomic_asm
-#define __copy_from_user_inatomic __copy_from_user_inatomic_asm
-#define __copy_from_user_zeroing __copy_from_user_zeroing_asm
-#endif
-
 #define IS_MEMCPY	  0
 #define IS_COPY_FROM_USER  1
 #define IS_COPY_FROM_USER_ZEROING  2
@@ -159,12 +151,9 @@ EX:	{ sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 }
 
 	{ addi r3, r1, 60; andi r9, r9, -64 }
 
-#if CHIP_HAS_WH64()
 	/* No need to prefetch dst, we'll just do the wh64
 	 * right before we copy a line.
 	 */
-#endif
-
 EX:	{ lw r5, r3; addi r3, r3, 64; movei r4, 1 }
 	/* Intentionally stall for a few cycles to leave L2 cache alone. */
 	{ bnzt zero, .; move r27, lr }
@@ -172,21 +161,6 @@ EX:	{ lw r6, r3; addi r3, r3, 64 }
 	/* Intentionally stall for a few cycles to leave L2 cache alone. */
 	{ bnzt zero, . }
 EX:	{ lw r7, r3; addi r3, r3, 64 }
-#if !CHIP_HAS_WH64()
-	/* Prefetch the dest */
-	/* Intentionally stall for a few cycles to leave L2 cache alone. */
-	{ bnzt zero, . }
-	/* Use a real load to cause a TLB miss if necessary.  We aren't using
-	 * r28, so this should be fine.
-	 */
-EX:	{ lw r28, r9; addi r9, r9, 64 }
-	/* Intentionally stall for a few cycles to leave L2 cache alone. */
-	{ bnzt zero, . }
-	{ prefetch r9; addi r9, r9, 64 }
-	/* Intentionally stall for a few cycles to leave L2 cache alone. */
-	{ bnzt zero, . }
-	{ prefetch r9; addi r9, r9, 64 }
-#endif
 	/* Intentionally stall for a few cycles to leave L2 cache alone. */
 	{ bz zero, .Lbig_loop2 }
 
@@ -287,13 +261,8 @@ EX:	{ lw r7, r3; addi r3, r3, 64 }
 	/* Fill second L1D line. */
 EX:	{ lw r17, r17; addi r1, r1, 48; mvz r3, r13, r1 } /* r17 = WORD_4 */
 
-#if CHIP_HAS_WH64()
 	/* Prepare destination line for writing. */
 EX:	{ wh64 r9; addi r9, r9, 64 }
-#else
-	/* Prefetch dest line */
-	{ prefetch r9; addi r9, r9, 64 }
-#endif
 	/* Load seven words that are L1D hits to cover wh64 L2 usage. */
 
 	/* Load the three remaining words from the last L1D line, which
@@ -331,16 +300,7 @@ EX:	{ lw r18, r1; addi r1, r1, 4 }                  /* r18 = WORD_8 */
 EX:	{ sw r0, r16; addi r0, r0, 4; add r16, r0, r2 } /* store(WORD_0) */
 EX:	{ sw r0, r13; addi r0, r0, 4; andi r16, r16, -64 } /* store(WORD_1) */
 EX:	{ sw r0, r14; addi r0, r0, 4; slt_u r16, r9, r16 } /* store(WORD_2) */
-#if CHIP_HAS_WH64()
 EX:	{ sw r0, r15; addi r0, r0, 4; addi r13, sp, -64 } /* store(WORD_3) */
-#else
-	/* Back up the r9 to a cache line we are already storing to
-	 * if it gets past the end of the dest vector.  Strictly speaking,
-	 * we don't need to back up to the start of a cache line, but it's free
-	 * and tidy, so why not?
-	 */
-EX:	{ sw r0, r15; addi r0, r0, 4; andi r13, r0, -64 } /* store(WORD_3) */
-#endif
 	/* Store second L1D line. */
 EX:	{ sw r0, r17; addi r0, r0, 4; mvz r9, r16, r13 }/* store(WORD_4) */
 EX:	{ sw r0, r19; addi r0, r0, 4 }                  /* store(WORD_5) */
@@ -404,7 +364,6 @@ EX:	{ sb r0, r3;   addi r0, r0, 1; addi r2, r2, -1 }
 
 .Ldest_is_word_aligned:
 
-#if CHIP_HAS_DWORD_ALIGN()
 EX:	{ andi r8, r0, 63; lwadd_na r6, r1, 4}
 	{ slti_u r9, r2, 64; bz r8, .Ldest_is_L2_line_aligned }
 
@@ -512,26 +471,6 @@ EX:	{ swadd r0, r13, 4; addi r2, r2, -32 }
 	/* Move r1 back to the point where it corresponds to r0. */
 	{ addi r1, r1, -4 }
 
-#else /* !CHIP_HAS_DWORD_ALIGN() */
-
-	/* Compute right/left shift counts and load initial source words. */
-	{ andi r5, r1, -4; andi r3, r1, 3 }
-EX:	{ lw r6, r5; addi r5, r5, 4; shli r3, r3, 3 }
-EX:	{ lw r7, r5; addi r5, r5, 4; sub r4, zero, r3 }
-
-	/* Load and store one word at a time, using shifts and ORs
-	 * to correct for the misaligned src.
-	 */
-.Lcopy_unaligned_src_loop:
-	{ shr r6, r6, r3; shl r8, r7, r4 }
-EX:	{ lw r7, r5; or r8, r8, r6; move r6, r7 }
-EX:	{ sw r0, r8; addi r0, r0, 4; addi r2, r2, -4 }
-	{ addi r5, r5, 4; slti_u r8, r2, 8 }
-	{ bzt r8, .Lcopy_unaligned_src_loop; addi r1, r1, 4 }
-
-	{ bz r2, .Lcopy_unaligned_done }
-#endif /* !CHIP_HAS_DWORD_ALIGN() */
-
 	/* Fall through */
 
 /*