diff options
author | Chris Metcalf <cmetcalf@tilera.com> | 2013-08-06 16:04:13 -0400 |
---|---|---|
committer | Chris Metcalf <cmetcalf@tilera.com> | 2013-08-13 16:04:10 -0400 |
commit | 2f9ac29eec71a696cb0dcc5fb82c0f8d4dac28c9 (patch) | |
tree | ee33ba7e452e8614130a811211eb2383a3133194 /arch/tile/kernel/intvec_64.S | |
parent | f10da5472c6907a3fbd6886224b36d21925ce47b (diff) | |
download | linux-2f9ac29eec71a696cb0dcc5fb82c0f8d4dac28c9.tar.bz2 |
tile: fast-path unaligned memory access for tilegx
This change enables unaligned userspace memory access via a kernel
fast path on tilegx. The kernel tracks user PC/instruction pairs
per-thread using a direct-mapped cache in userspace. The cache
maps those PC/instruction pairs to JIT'ed instruction sequences that
load or store using byte-wide load store intructions and then
synthesize 2-, 4- or 8-byte load or store results. Once an
instruction has been seen to generate an unaligned access once,
subsequent hits on that instruction typically require overhead
of only around 50 cycles if cache and TLB is hot.
We support the prctl() PR_GET_UNALIGN / PR_SET_UNALIGN sys call to
enable or disable unaligned fixups on a per-process basis.
To do this we pull some of the tilepro unaligned support out of the
single_step.c file; tilepro uses instruction disassembly for both
single-step and unaligned access support. Since tilegx actually has
hardware singlestep support, though, it's cleaner to keep the tilegx
unaligned access code in a separate file. While we're at it,
properly rename the tilepro-specific types, etc., to have tilepro
suffixes instead of generic tile suffixes.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Diffstat (limited to 'arch/tile/kernel/intvec_64.S')
-rw-r--r-- | arch/tile/kernel/intvec_64.S | 231 |
1 files changed, 224 insertions, 7 deletions
diff --git a/arch/tile/kernel/intvec_64.S b/arch/tile/kernel/intvec_64.S index 85d483957027..884af9ea5bed 100644 --- a/arch/tile/kernel/intvec_64.S +++ b/arch/tile/kernel/intvec_64.S @@ -17,11 +17,13 @@ #include <linux/linkage.h> #include <linux/errno.h> #include <linux/unistd.h> +#include <linux/init.h> #include <asm/ptrace.h> #include <asm/thread_info.h> #include <asm/irqflags.h> #include <asm/asm-offsets.h> #include <asm/types.h> +#include <asm/traps.h> #include <asm/signal.h> #include <hv/hypervisor.h> #include <arch/abi.h> @@ -98,6 +100,189 @@ } .endm + /* + * Unalign data exception fast handling: In order to handle + * unaligned data access, a fast JIT version is generated and stored + * in a specific area in user space. We first need to do a quick poke + * to see if the JIT is available. We use certain bits in the fault + * PC (3 to 9 is used for 16KB page size) as index to address the JIT + * code area. The first 64bit word is the fault PC, and the 2nd one is + * the fault bundle itself. If these 2 words both match, then we + * directly "iret" to JIT code. If not, a slow path is invoked to + * generate new JIT code. Note: the current JIT code WILL be + * overwritten if it existed. So, ideally we can handle 128 unalign + * fixups via JIT. For lookup efficiency and to effectively support + * tight loops with multiple unaligned reference, a simple + * direct-mapped cache is used. + * + * SPR_EX_CONTEXT_K_0 is modified to return to JIT code. + * SPR_EX_CONTEXT_K_1 has ICS set. + * SPR_EX_CONTEXT_0_0 is setup to user program's next PC. + * SPR_EX_CONTEXT_0_1 = 0. + */ + .macro int_hand_unalign_fast vecnum, vecname + .org (\vecnum << 8) +intvec_\vecname: + /* Put r3 in SPR_SYSTEM_SAVE_K_1. */ + mtspr SPR_SYSTEM_SAVE_K_1, r3 + + mfspr r3, SPR_EX_CONTEXT_K_1 + /* + * Examine if exception comes from user without ICS set. + * If not, just go directly to the slow path. + */ + bnez r3, hand_unalign_slow_nonuser + + mfspr r3, SPR_SYSTEM_SAVE_K_0 + + /* Get &thread_info->unalign_jit_tmp[0] in r3. */ + mm r3, zero, LOG2_THREAD_SIZE, 63 +#if THREAD_SIZE < 65536 + addli r3, r3, -(PAGE_SIZE - THREAD_INFO_UNALIGN_JIT_TMP_OFFSET) +#else + addli r3, r3, -(PAGE_SIZE/2) + addli r3, r3, -(PAGE_SIZE/2 - THREAD_INFO_UNALIGN_JIT_TMP_OFFSET) +#endif + + /* + * Save r0, r1, r2 into thread_info array r3 points to + * from low to high memory in order. + */ + st_add r3, r0, 8 + st_add r3, r1, 8 + { + st_add r3, r2, 8 + andi r2, sp, 7 + } + + /* Save stored r3 value so we can revert it on a page fault. */ + mfspr r1, SPR_SYSTEM_SAVE_K_1 + st r3, r1 + + { + /* Generate a SIGBUS if sp is not 8-byte aligned. */ + bnez r2, hand_unalign_slow_badsp + } + + /* + * Get the thread_info in r0; load r1 with pc. Set the low bit of sp + * as an indicator to the page fault code in case we fault. + */ + { + ori sp, sp, 1 + mfspr r1, SPR_EX_CONTEXT_K_0 + } + + /* Add the jit_info offset in thread_info; extract r1 [3:9] into r2. */ + { + addli r0, r3, THREAD_INFO_UNALIGN_JIT_BASE_OFFSET - \ + (THREAD_INFO_UNALIGN_JIT_TMP_OFFSET + (3 * 8)) + bfextu r2, r1, 3, (2 + PAGE_SHIFT - UNALIGN_JIT_SHIFT) + } + + /* Load the jit_info; multiply r2 by 128. */ + { + ld r0, r0 + shli r2, r2, UNALIGN_JIT_SHIFT + } + + /* + * If r0 is NULL, the JIT page is not mapped, so go to slow path; + * add offset r2 to r0 at the same time. + */ + { + beqz r0, hand_unalign_slow + add r2, r0, r2 + } + + /* + * We are loading from userspace (both the JIT info PC and + * instruction word, and the instruction word we executed) + * and since either could fault while holding the interrupt + * critical section, we must tag this region and check it in + * do_page_fault() to handle it properly. + */ +ENTRY(__start_unalign_asm_code) + + /* Load first word of JIT in r0 and increment r2 by 8. */ + ld_add r0, r2, 8 + + /* + * Compare the PC with the 1st word in JIT; load the fault bundle + * into r1. + */ + { + cmpeq r0, r0, r1 + ld r1, r1 + } + + /* Go to slow path if PC doesn't match. */ + beqz r0, hand_unalign_slow + + /* + * Load the 2nd word of JIT, which is supposed to be the fault + * bundle for a cache hit. Increment r2; after this bundle r2 will + * point to the potential start of the JIT code we want to run. + */ + ld_add r0, r2, 8 + + /* No further accesses to userspace are done after this point. */ +ENTRY(__end_unalign_asm_code) + + /* Compare the real bundle with what is saved in the JIT area. */ + { + cmpeq r0, r1, r0 + mtspr SPR_EX_CONTEXT_0_1, zero + } + + /* Go to slow path if the fault bundle does not match. */ + beqz r0, hand_unalign_slow + + /* + * A cache hit is found. + * r2 points to start of JIT code (3rd word). + * r0 is the fault pc. + * r1 is the fault bundle. + * Reset the low bit of sp. + */ + { + mfspr r0, SPR_EX_CONTEXT_K_0 + andi sp, sp, ~1 + } + + /* Write r2 into EX_CONTEXT_K_0 and increment PC. */ + { + mtspr SPR_EX_CONTEXT_K_0, r2 + addi r0, r0, 8 + } + + /* + * Set ICS on kernel EX_CONTEXT_K_1 in order to "iret" to + * user with ICS set. This way, if the JIT fixup causes another + * unalign exception (which shouldn't be possible) the user + * process will be terminated with SIGBUS. Also, our fixup will + * run without interleaving with external interrupts. + * Each fixup is at most 14 bundles, so it won't hold ICS for long. + */ + { + movei r1, PL_ICS_EX1(USER_PL, 1) + mtspr SPR_EX_CONTEXT_0_0, r0 + } + + { + mtspr SPR_EX_CONTEXT_K_1, r1 + addi r3, r3, -(3 * 8) + } + + /* Restore r0..r3. */ + ld_add r0, r3, 8 + ld_add r1, r3, 8 + ld_add r2, r3, 8 + ld r3, r3 + + iret + ENDPROC(intvec_\vecname) + .endm #ifdef __COLLECT_LINKER_FEEDBACK__ .pushsection .text.intvec_feedback,"ax" @@ -118,15 +303,21 @@ intvec_feedback: * The "processing" argument specifies the code for processing * the interrupt. Defaults to "handle_interrupt". */ - .macro int_hand vecnum, vecname, c_routine, processing=handle_interrupt - .org (\vecnum << 8) + .macro __int_hand vecnum, vecname, c_routine,processing=handle_interrupt intvec_\vecname: /* Temporarily save a register so we have somewhere to work. */ mtspr SPR_SYSTEM_SAVE_K_1, r0 mfspr r0, SPR_EX_CONTEXT_K_1 - andi r0, r0, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ + /* + * The unalign data fastpath code sets the low bit in sp to + * force us to reset it here on fault. + */ + { + blbs sp, 2f + andi r0, r0, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ + } .ifc \vecnum, INT_DOUBLE_FAULT /* @@ -176,7 +367,7 @@ intvec_\vecname: } .endif - +2: /* * SYSTEM_SAVE_K_0 holds the cpu number in the low bits, and * the current stack top in the higher bits. So we recover @@ -1223,10 +1414,31 @@ STD_ENTRY(_sys_clone) j sys_clone STD_ENDPROC(_sys_clone) -/* The single-step support may need to read all the registers. */ + /* + * Recover r3, r2, r1 and r0 here saved by unalign fast vector. + * The vector area limit is 32 bundles, so we handle the reload here. + * r0, r1, r2 are in thread_info from low to high memory in order. + * r3 points to location the original r3 was saved. + * We put this code in the __HEAD section so it can be reached + * via a conditional branch from the fast path. + */ + __HEAD +hand_unalign_slow: + andi sp, sp, ~1 +hand_unalign_slow_badsp: + addi r3, r3, -(3 * 8) + ld_add r0, r3, 8 + ld_add r1, r3, 8 + ld r2, r3 +hand_unalign_slow_nonuser: + mfspr r3, SPR_SYSTEM_SAVE_K_1 + __int_hand INT_UNALIGN_DATA, UNALIGN_DATA_SLOW, int_unalign + +/* The unaligned data support needs to read all the registers. */ int_unalign: push_extra_callee_saves r0 - j do_trap + j do_unaligned +ENDPROC(hand_unalign_slow) /* Fill the return address stack with nonzero entries. */ STD_ENTRY(fill_ra_stack) @@ -1240,6 +1452,11 @@ STD_ENTRY(fill_ra_stack) 4: jrp r0 STD_ENDPROC(fill_ra_stack) + .macro int_hand vecnum, vecname, c_routine, processing=handle_interrupt + .org (\vecnum << 8) + __int_hand \vecnum, \vecname, \c_routine, \processing + .endm + /* Include .intrpt1 array of interrupt vectors */ .section ".intrpt1", "ax" @@ -1272,7 +1489,7 @@ STD_ENTRY(fill_ra_stack) int_hand INT_SWINT_1, SWINT_1, SYSCALL, handle_syscall int_hand INT_SWINT_0, SWINT_0, do_trap int_hand INT_ILL_TRANS, ILL_TRANS, do_trap - int_hand INT_UNALIGN_DATA, UNALIGN_DATA, int_unalign + int_hand_unalign_fast INT_UNALIGN_DATA, UNALIGN_DATA int_hand INT_DTLB_MISS, DTLB_MISS, do_page_fault int_hand INT_DTLB_ACCESS, DTLB_ACCESS, do_page_fault int_hand INT_IDN_FIREWALL, IDN_FIREWALL, do_hardwall_trap |