Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 321 insertions, 0 deletions

diff --git a/arch/sparc/kernel/etrap.S b/arch/sparc/kernel/etrap.S
new file mode 100644
index 000000000000..a8b35bed12a2
--- /dev/null
+++ b/arch/sparc/kernel/etrap.S
@@ -0,0 +1,321 @@
+/* $Id: etrap.S,v 1.31 2000/01/08 16:38:18 anton Exp $
+ * etrap.S: Sparc trap window preparation for entry into the
+ *          Linux kernel.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <asm/head.h>
+#include <asm/asi.h>
+#include <asm/contregs.h>
+#include <asm/page.h>
+#include <asm/psr.h>
+#include <asm/ptrace.h>
+#include <asm/winmacro.h>
+#include <asm/asmmacro.h>
+#include <asm/thread_info.h>
+
+/* Registers to not touch at all. */
+#define t_psr        l0 /* Set by caller */
+#define t_pc         l1 /* Set by caller */
+#define t_npc        l2 /* Set by caller */
+#define t_wim        l3 /* Set by caller */
+#define t_twinmask   l4 /* Set at beginning of this entry routine. */
+#define t_kstack     l5 /* Set right before pt_regs frame is built */
+#define t_retpc      l6 /* If you change this, change winmacro.h header file */
+#define t_systable   l7 /* Never touch this, could be the syscall table ptr. */
+#define curptr       g6 /* Set after pt_regs frame is built */
+
+	.text
+	.align 4
+
+	/* SEVEN WINDOW PATCH INSTRUCTIONS */
+	.globl	tsetup_7win_patch1, tsetup_7win_patch2
+	.globl	tsetup_7win_patch3, tsetup_7win_patch4
+	.globl	tsetup_7win_patch5, tsetup_7win_patch6
+tsetup_7win_patch1:	sll	%t_wim, 0x6, %t_wim
+tsetup_7win_patch2:	and	%g2, 0x7f, %g2
+tsetup_7win_patch3:	and	%g2, 0x7f, %g2
+tsetup_7win_patch4:	and	%g1, 0x7f, %g1
+tsetup_7win_patch5:	sll	%t_wim, 0x6, %t_wim
+tsetup_7win_patch6:	and	%g2, 0x7f, %g2
+	/* END OF PATCH INSTRUCTIONS */
+
+	/* At trap time, interrupts and all generic traps do the
+	 * following:
+	 *
+	 * rd	%psr, %l0
+	 * b	some_handler
+	 * rd	%wim, %l3
+	 * nop
+	 *
+	 * Then 'some_handler' if it needs a trap frame (ie. it has
+	 * to call c-code and the trap cannot be handled in-window)
+	 * then it does the SAVE_ALL macro in entry.S which does
+	 *
+	 * sethi	%hi(trap_setup), %l4
+	 * jmpl		%l4 + %lo(trap_setup), %l6
+	 * nop
+	 */
+
+	/* 2 3 4  window number
+	 * -----
+	 * O T S  mnemonic
+	 *
+	 * O == Current window before trap
+	 * T == Window entered when trap occurred
+	 * S == Window we will need to save if (1<<T) == %wim
+	 *
+	 * Before execution gets here, it must be guaranteed that
+	 * %l0 contains trap time %psr, %l1 and %l2 contain the
+	 * trap pc and npc, and %l3 contains the trap time %wim.
+	 */
+
+	.globl	trap_setup, tsetup_patch1, tsetup_patch2
+	.globl	tsetup_patch3, tsetup_patch4
+	.globl	tsetup_patch5, tsetup_patch6
+trap_setup:
+	/* Calculate mask of trap window.  See if from user
+	 * or kernel and branch conditionally.
+	 */
+	mov	1, %t_twinmask
+	andcc	%t_psr, PSR_PS, %g0		 ! fromsupv_p = (psr & PSR_PS)
+	be	trap_setup_from_user		 ! nope, from user mode
+	 sll	%t_twinmask, %t_psr, %t_twinmask ! t_twinmask = (1 << psr)
+
+	/* From kernel, allocate more kernel stack and
+	 * build a pt_regs trap frame.
+	 */
+	sub	%fp, (STACKFRAME_SZ + TRACEREG_SZ), %t_kstack
+	STORE_PT_ALL(t_kstack, t_psr, t_pc, t_npc, g2)
+
+	/* See if we are in the trap window. */
+	andcc	%t_twinmask, %t_wim, %g0
+	bne	trap_setup_kernel_spill		! in trap window, clean up
+	 nop
+
+	/* Trap from kernel with a window available.
+	 * Just do it...
+	 */
+	jmpl	%t_retpc + 0x8, %g0	! return to caller
+	 mov	%t_kstack, %sp		! jump onto new stack
+
+trap_setup_kernel_spill:
+	ld	[%curptr + TI_UWINMASK], %g1
+	orcc	%g0, %g1, %g0
+	bne	trap_setup_user_spill	! there are some user windows, yuck
+	/* Spill from kernel, but only kernel windows, adjust
+	 * %wim and go.
+	 */
+	 srl	%t_wim, 0x1, %g2	! begin computation of new %wim
+tsetup_patch1:
+	sll	%t_wim, 0x7, %t_wim	! patched on 7 window Sparcs
+	or	%t_wim, %g2, %g2
+tsetup_patch2:
+	and	%g2, 0xff, %g2		! patched on 7 window Sparcs
+
+	save	%g0, %g0, %g0
+
+	/* Set new %wim value */
+	wr	%g2, 0x0, %wim
+
+	/* Save the kernel window onto the corresponding stack. */
+	STORE_WINDOW(sp)
+
+	restore	%g0, %g0, %g0
+
+	jmpl	%t_retpc + 0x8, %g0	! return to caller
+	 mov	%t_kstack, %sp		! and onto new kernel stack
+
+#define STACK_OFFSET (THREAD_SIZE - TRACEREG_SZ - STACKFRAME_SZ)
+
+trap_setup_from_user:
+	/* We can't use %curptr yet. */
+	LOAD_CURRENT(t_kstack, t_twinmask)
+
+	sethi	%hi(STACK_OFFSET), %t_twinmask
+	or	%t_twinmask, %lo(STACK_OFFSET), %t_twinmask
+	add	%t_kstack, %t_twinmask, %t_kstack
+
+	mov	1, %t_twinmask
+	sll	%t_twinmask, %t_psr, %t_twinmask ! t_twinmask = (1 << psr)
+
+	/* Build pt_regs frame. */
+	STORE_PT_ALL(t_kstack, t_psr, t_pc, t_npc, g2)
+
+#if 0
+	/* If we're sure every task_struct is THREAD_SIZE aligned,
+	   we can speed this up. */
+	sethi	%hi(STACK_OFFSET), %curptr
+	or	%curptr, %lo(STACK_OFFSET), %curptr
+	sub	%t_kstack, %curptr, %curptr
+#else
+	sethi	%hi(~(THREAD_SIZE - 1)), %curptr
+	and	%t_kstack, %curptr, %curptr
+#endif
+
+	/* Clear current_thread_info->w_saved */
+	st	%g0, [%curptr + TI_W_SAVED]
+
+	/* See if we are in the trap window. */
+	andcc	%t_twinmask, %t_wim, %g0
+	bne	trap_setup_user_spill		! yep we are
+	 orn	%g0, %t_twinmask, %g1		! negate trap win mask into %g1
+
+	/* Trap from user, but not into the invalid window.
+	 * Calculate new umask.  The way this works is,
+	 * any window from the %wim at trap time until
+	 * the window right before the one we are in now,
+	 * is a user window.  A diagram:
+	 *
+	 *      7 6 5 4 3 2 1 0    window number
+	 *      ---------------
+	 *        I     L T        mnemonic
+	 *
+	 * Window 'I' is the invalid window in our example,
+	 * window 'L' is the window the user was in when
+	 * the trap occurred, window T is the trap window
+	 * we are in now.  So therefore, windows 5, 4 and
+	 * 3 are user windows.  The following sequence
+	 * computes the user winmask to represent this.
+	 */
+	subcc	%t_wim, %t_twinmask, %g2
+	bneg,a	1f
+	 sub	%g2, 0x1, %g2
+1:
+	andn	%g2, %t_twinmask, %g2
+tsetup_patch3:
+	and	%g2, 0xff, %g2			! patched on 7win Sparcs
+	st	%g2, [%curptr + TI_UWINMASK]	! store new umask
+
+	jmpl	%t_retpc + 0x8, %g0		! return to caller
+	 mov	%t_kstack, %sp			! and onto kernel stack
+
+trap_setup_user_spill:
+	/* A spill occurred from either kernel or user mode
+	 * and there exist some user windows to deal with.
+	 * A mask of the currently valid user windows
+	 * is in %g1 upon entry to here.
+	 */
+
+tsetup_patch4:
+	and	%g1, 0xff, %g1		! patched on 7win Sparcs, mask
+	srl	%t_wim, 0x1, %g2	! compute new %wim
+tsetup_patch5:
+	sll	%t_wim, 0x7, %t_wim	! patched on 7win Sparcs
+	or	%t_wim, %g2, %g2	! %g2 is new %wim
+tsetup_patch6:
+	and	%g2, 0xff, %g2		! patched on 7win Sparcs
+	andn	%g1, %g2, %g1		! clear this bit in %g1
+	st	%g1, [%curptr + TI_UWINMASK]
+
+	save	%g0, %g0, %g0
+
+	wr	%g2, 0x0, %wim
+
+	/* Call MMU-architecture dependent stack checking
+	 * routine.
+	 */
+	.globl	tsetup_mmu_patchme
+tsetup_mmu_patchme:
+	b	tsetup_sun4c_stackchk
+	 andcc	%sp, 0x7, %g0
+
+	/* Architecture specific stack checking routines.  When either
+	 * of these routines are called, the globals are free to use
+	 * as they have been safely stashed on the new kernel stack
+	 * pointer.  Thus the definition below for simplicity.
+	 */
+#define glob_tmp     g1
+
+	.globl	tsetup_sun4c_stackchk
+tsetup_sun4c_stackchk:
+	/* Done by caller: andcc %sp, 0x7, %g0 */
+	bne	trap_setup_user_stack_is_bolixed
+	 sra	%sp, 29, %glob_tmp
+
+	add	%glob_tmp, 0x1, %glob_tmp
+	andncc	%glob_tmp, 0x1, %g0
+	bne	trap_setup_user_stack_is_bolixed
+	 and	%sp, 0xfff, %glob_tmp		! delay slot
+
+	/* See if our dump area will be on more than one
+	 * page.
+	 */
+	add	%glob_tmp, 0x38, %glob_tmp
+	andncc	%glob_tmp, 0xff8, %g0
+	be	tsetup_sun4c_onepage		! only one page to check
+	 lda	[%sp] ASI_PTE, %glob_tmp	! have to check first page anyways
+
+tsetup_sun4c_twopages:
+	/* Is first page ok permission wise? */
+	srl	%glob_tmp, 29, %glob_tmp
+	cmp	%glob_tmp, 0x6
+	bne	trap_setup_user_stack_is_bolixed
+	 add	%sp, 0x38, %glob_tmp		/* Is second page in vma hole? */
+
+	sra	%glob_tmp, 29, %glob_tmp
+	add	%glob_tmp, 0x1, %glob_tmp
+	andncc	%glob_tmp, 0x1, %g0
+	bne	trap_setup_user_stack_is_bolixed
+	 add	%sp, 0x38, %glob_tmp
+
+	lda	[%glob_tmp] ASI_PTE, %glob_tmp
+
+tsetup_sun4c_onepage:
+	srl	%glob_tmp, 29, %glob_tmp
+	cmp	%glob_tmp, 0x6				! can user write to it?
+	bne	trap_setup_user_stack_is_bolixed	! failure
+	 nop
+
+	STORE_WINDOW(sp)
+
+	restore %g0, %g0, %g0
+
+	jmpl	%t_retpc + 0x8, %g0
+	 mov	%t_kstack, %sp
+
+	.globl	tsetup_srmmu_stackchk
+tsetup_srmmu_stackchk:
+	/* Check results of callers andcc %sp, 0x7, %g0 */
+	bne	trap_setup_user_stack_is_bolixed
+	 sethi   %hi(PAGE_OFFSET), %glob_tmp
+
+	cmp	%glob_tmp, %sp
+	bleu,a	1f
+	 lda	[%g0] ASI_M_MMUREGS, %glob_tmp		! read MMU control
+
+trap_setup_user_stack_is_bolixed:
+	/* From user/kernel into invalid window w/bad user
+	 * stack. Save bad user stack, and return to caller.
+	 */
+	SAVE_BOLIXED_USER_STACK(curptr, g3)
+	restore	%g0, %g0, %g0
+
+	jmpl	%t_retpc + 0x8, %g0
+	 mov	%t_kstack, %sp
+
+1:
+	/* Clear the fault status and turn on the no_fault bit. */
+	or	%glob_tmp, 0x2, %glob_tmp		! or in no_fault bit
+	sta	%glob_tmp, [%g0] ASI_M_MMUREGS		! set it
+
+	/* Dump the registers and cross fingers. */
+	STORE_WINDOW(sp)
+
+	/* Clear the no_fault bit and check the status. */
+	andn	%glob_tmp, 0x2, %glob_tmp
+	sta	%glob_tmp, [%g0] ASI_M_MMUREGS
+	mov	AC_M_SFAR, %glob_tmp
+	lda	[%glob_tmp] ASI_M_MMUREGS, %g0
+	mov	AC_M_SFSR, %glob_tmp
+	lda	[%glob_tmp] ASI_M_MMUREGS, %glob_tmp	! save away status of winstore
+	andcc	%glob_tmp, 0x2, %g0			! did we fault?
+	bne	trap_setup_user_stack_is_bolixed	! failure
+	 nop
+
+	restore %g0, %g0, %g0
+
+	jmpl	%t_retpc + 0x8, %g0
+	 mov	%t_kstack, %sp
+