sh: Reworked SH7780 PCI initialization.

This consolidates the PCI initialization code for all of the pci-sh7780
users, and sets up the memory window dynamically as opposed to using
hardcoded window positions.

A number of bugs were fixed at the same time, including the PIO handling
and master abort timeout settings being incorrect.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

5 files changed, 102 insertions, 145 deletions

diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c
index 15ca65cb667e..08b2d8658a00 100644
--- a/arch/sh/drivers/pci/fixups-r7780rp.c
+++ b/arch/sh/drivers/pci/fixups-r7780rp.c
@@ -22,15 +22,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
 {
 	return irq_tab[slot];
 }
-
-int pci_fixup_pcic(struct pci_channel *chan)
-{
-	pci_write_reg(chan, 0x000043ff, SH4_PCIINTM);
-	pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR);
-	pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0);
-	pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0);
-	pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1);
-	pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1);
-
-	return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c
index 250b0edd7365..0930f988ac29 100644
--- a/arch/sh/drivers/pci/fixups-sdk7780.c
+++ b/arch/sh/drivers/pci/fixups-sdk7780.c
@@ -31,22 +31,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
 {
        return sdk7780_irq_tab[pin-1][slot];
 }
-int pci_fixup_pcic(struct pci_channel *chan)
-{
-	/* Enable all interrupts, so we know what to fix */
-	pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR);
-
-	/* Set up standard PCI config registers */
-	pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0);	/* PCI */
-	pci_write_reg(chan, 0x08000000, SH4_PCILAR0);	/* SHwy */
-	pci_write_reg(chan, 0x07F00001, SH4_PCILSR0);	/* size 128M w/ MBAR */
-
-	pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1);
-	pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
-	pci_write_reg(chan, 0x00000000, SH4_PCILSR1);
-
-	pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR);
-	pci_write_reg(chan, 0xA5000C01, SH4_PCICR);
-
-	return 0;
-}
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
index 4744a7dede0c..43dddd827561 100644
--- a/arch/sh/drivers/pci/pci-sh4.h
+++ b/arch/sh/drivers/pci/pci-sh4.h
@@ -49,6 +49,17 @@
   #define SH4_PCIINT_MWPD	  0x00000002	/* Master Write PERR Detect */
   #define SH4_PCIINT_MRPD	  0x00000001	/* Master Read PERR Detect */
 #define SH4_PCIINTM		0x118		/* PCI Interrupt Mask */
+  #define SH4_PCIINTM_TTADIM	  BIT(14)	/* Target-target abort interrupt */
+  #define SH4_PCIINTM_TMTOIM	  BIT(9)	/* Target retry timeout */
+  #define SH4_PCIINTM_MDEIM	  BIT(8)	/* Master function disable error */
+  #define SH4_PCIINTM_APEDIM	  BIT(7)	/* Address parity error detection */
+  #define SH4_PCIINTM_SDIM	  BIT(6)	/* SERR detection */
+  #define SH4_PCIINTM_DPEITWM	  BIT(5)	/* Data parity error for target write */
+  #define SH4_PCIINTM_PEDITRM	  BIT(4)	/* PERR detection for target read */
+  #define SH4_PCIINTM_TADIMM	  BIT(3)	/* Target abort for master */
+  #define SH4_PCIINTM_MADIMM	  BIT(2)	/* Master abort for master */
+  #define SH4_PCIINTM_MWPDIM	  BIT(1)	/* Master write data parity error */
+  #define SH4_PCIINTM_MRDPEIM	  BIT(0)	/* Master read data parity error */
 #define SH4_PCIALR		0x11C		/* Error Address Register */
 #define SH4_PCICLR		0x120		/* Error Command/Data */
   #define SH4_PCICLR_MPIO	  0x80000000
@@ -61,7 +72,7 @@
 #define SH4_PCIAINT		0x130		/* Arbiter Interrupt Register */
   #define SH4_PCIAINT_MBKN	  0x00002000	/* Master Broken Interrupt */
   #define SH4_PCIAINT_TBTO	  0x00001000	/* Target Bus Time Out */
-  #define SH4_PCIAINT_MBTO	  0x00001000	/* Master Bus Time Out */
+  #define SH4_PCIAINT_MBTO	  0x00000800	/* Master Bus Time Out */
   #define SH4_PCIAINT_TABT	  0x00000008	/* Target Abort */
   #define SH4_PCIAINT_MABT	  0x00000004	/* Master Abort */
   #define SH4_PCIAINT_RDPE	  0x00000002	/* Read Data Parity Error */
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index 323b92d565fe..019e1afcd0a3 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -1,7 +1,7 @@
 /*
  * Low-Level PCI Support for the SH7780
  *
- *  Copyright (C) 2005 - 2009  Paul Mundt
+ *  Copyright (C) 2005 - 2010  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -14,11 +14,13 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include "pci-sh4.h"
+#include <asm/mmu.h>
+#include <asm/sizes.h>
 
 static struct resource sh7785_io_resource = {
 	.name	= "SH7785_IO",
-	.start	= SH7780_PCI_IO_BASE,
-	.end	= SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
+	.start	= 0x1000,
+	.end	= SH7780_PCI_IO_SIZE - 1,
 	.flags	= IORESOURCE_IO
 };
 
@@ -38,25 +40,14 @@ static struct pci_channel sh7780_pci_controller = {
 	.io_map_base	= SH7780_PCI_IO_BASE,
 };
 
-static struct sh4_pci_address_map sh7780_pci_map = {
-	.window0	= {
-#if defined(CONFIG_32BIT)
-		.base	= SH7780_32BIT_DDR_BASE_ADDR,
-		.size	= 0x40000000,
-#else
-		.base	= SH7780_CS0_BASE_ADDR,
-		.size	= 0x20000000,
-#endif
-	},
-};
-
 static int __init sh7780_pci_init(void)
 {
 	struct pci_channel *chan = &sh7780_pci_controller;
+	phys_addr_t memphys;
+	size_t memsize;
 	unsigned int id;
-	const char *type = NULL;
+	const char *type;
 	int ret;
-	u32 word;
 
 	printk(KERN_NOTICE "PCI: Starting intialization.\n");
 
@@ -65,17 +56,24 @@ static int __init sh7780_pci_init(void)
 	/* Enable CPU access to the PCIC registers. */
 	__raw_writel(PCIECR_ENBL, PCIECR);
 
-	id = __raw_readw(chan->reg_base + SH7780_PCIVID);
-	if (id != SH7780_VENDOR_ID) {
+	/* Reset */
+	__raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_PRST,
+		     chan->reg_base + SH4_PCICR);
+
+	/* Wait for it to come back up.. */
+	mdelay(100);
+
+	id = __raw_readw(chan->reg_base + PCI_VENDOR_ID);
+	if (id != PCI_VENDOR_ID_RENESAS) {
 		printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id);
 		return -ENODEV;
 	}
 
-	id = __raw_readw(chan->reg_base + SH7780_PCIDID);
-	type = (id == SH7763_DEVICE_ID)	? "SH7763" :
-	       (id == SH7780_DEVICE_ID) ? "SH7780" :
-	       (id == SH7781_DEVICE_ID) ? "SH7781" :
-	       (id == SH7785_DEVICE_ID) ? "SH7785" :
+	id = __raw_readw(chan->reg_base + PCI_DEVICE_ID);
+	type = (id == PCI_DEVICE_ID_RENESAS_SH7763) ? "SH7763" :
+	       (id == PCI_DEVICE_ID_RENESAS_SH7780) ? "SH7780" :
+	       (id == PCI_DEVICE_ID_RENESAS_SH7781) ? "SH7781" :
+	       (id == PCI_DEVICE_ID_RENESAS_SH7785) ? "SH7785" :
 					  NULL;
 	if (unlikely(!type)) {
 		printk(KERN_ERR "PCI: Found an unsupported Renesas host "
@@ -85,59 +83,78 @@ static int __init sh7780_pci_init(void)
 
 	printk(KERN_NOTICE "PCI: Found a Renesas %s host "
 	       "controller, revision %d.\n", type,
-	       __raw_readb(chan->reg_base + SH7780_PCIRID));
+	       __raw_readb(chan->reg_base + PCI_REVISION_ID));
 
 	if ((ret = sh4_pci_check_direct(chan)) != 0)
 		return ret;
 
 	/*
-	 * Set the class and sub-class codes.
+	 * Now throw it in to register initialization mode and
+	 * start the real work.
 	 */
-	__raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8,
-		     chan->reg_base + SH7780_PCIBCC);
-	__raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff,
-		     chan->reg_base + SH7780_PCISUB);
+	__raw_writel(SH4_PCICR_PREFIX, chan->reg_base + SH4_PCICR);
+
+	memphys = __pa(memory_start);
+	memsize = memory_end - memory_start;
 
 	/*
 	 * Set IO and Mem windows to local address
 	 * Make PCI and local address the same for easy 1 to 1 mapping
 	 */
-	pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0);
-	/* Set the values on window 0 PCI config registers */
-	pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0);
-	pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0);
-
-	pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
-
-	/* Set up standard PCI config registers */
-	__raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS);
-	__raw_writew(0x0047, chan->reg_base + SH7780_PCICMD);
-	__raw_writew(0x1912, chan->reg_base + SH7780_PCISVID);
-	__raw_writew(0x0001, chan->reg_base + SH7780_PCISID);
-
-	__raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF);
-
-	/* Apply any last-minute PCIC fixups */
-	pci_fixup_pcic(chan);
-
-	pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0);
-	pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0);
-
-#ifdef CONFIG_32BIT
-	pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2);
-	pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
-#endif
-
-	/* Set IOBR for windows containing area specified in pci.h */
-	pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1),
-		      SH7780_PCIIOBR);
-	pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)),
-		      SH7780_PCIIOBMR);
-
-	/* SH7780 init done, set central function init complete */
-	/* use round robin mode to stop a device starving/overruning */
-	word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
-	pci_write_reg(chan, word, SH4_PCICR);
+	__raw_writel(0, chan->reg_base + PCI_BASE_ADDRESS_0);
+
+	__raw_writel(memphys, chan->reg_base + SH4_PCILAR0);
+	__raw_writel((memsize - 1) << 9 | 1,
+		     chan->reg_base + SH4_PCILSR0);
+
+	/* Clear out PCI arbiter IRQs */
+	__raw_writel(0, chan->reg_base + SH4_PCIAINT);
+
+	/* Unmask all of the arbiter IRQs. */
+	__raw_writel(SH4_PCIAINT_MBKN | SH4_PCIAINT_TBTO | SH4_PCIAINT_MBTO | \
+		     SH4_PCIAINT_TABT | SH4_PCIAINT_MABT | SH4_PCIAINT_RDPE | \
+		     SH4_PCIAINT_WDPE, chan->reg_base + SH4_PCIAINTM);
+
+	/* Clear all error conditions */
+	__raw_writew(PCI_STATUS_DETECTED_PARITY  | \
+		     PCI_STATUS_SIG_SYSTEM_ERROR | \
+		     PCI_STATUS_REC_MASTER_ABORT | \
+		     PCI_STATUS_REC_TARGET_ABORT | \
+		     PCI_STATUS_SIG_TARGET_ABORT | \
+		     PCI_STATUS_PARITY, chan->reg_base + PCI_STATUS);
+
+	__raw_writew(PCI_COMMAND_SERR | PCI_COMMAND_WAIT | \
+		     PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | \
+		     PCI_COMMAND_MEMORY, chan->reg_base + PCI_COMMAND);
+
+	/* Unmask all of the PCI IRQs */
+	__raw_writel(SH4_PCIINTM_TTADIM  | SH4_PCIINTM_TMTOIM  | \
+		     SH4_PCIINTM_MDEIM   | SH4_PCIINTM_APEDIM  | \
+		     SH4_PCIINTM_SDIM    | SH4_PCIINTM_DPEITWM | \
+		     SH4_PCIINTM_PEDITRM | SH4_PCIINTM_TADIMM  | \
+		     SH4_PCIINTM_MADIMM  | SH4_PCIINTM_MWPDIM  | \
+		     SH4_PCIINTM_MRDPEIM, chan->reg_base + SH4_PCIINTM);
+
+	/*
+	 * Disable the cache snoop controller for non-coherent DMA.
+	 */
+	__raw_writel(0, chan->reg_base + SH7780_PCICSCR0);
+	__raw_writel(0, chan->reg_base + SH7780_PCICSAR0);
+	__raw_writel(0, chan->reg_base + SH7780_PCICSCR1);
+	__raw_writel(0, chan->reg_base + SH7780_PCICSAR1);
+
+	__raw_writel(0xfd000000, chan->reg_base + SH7780_PCIMBR0);
+	__raw_writel(0x00fc0000, chan->reg_base + SH7780_PCIMBMR0);
+
+	__raw_writel(0, chan->reg_base + SH7780_PCIIOBR);
+	__raw_writel(0, chan->reg_base + SH7780_PCIIOBMR);
+
+	/*
+	 * Initialization mode complete, release the control register and
+	 * enable round robin mode to stop device overruns/starvation.
+	 */
+	__raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO,
+		     chan->reg_base + SH4_PCICR);
 
 	register_pci_controller(chan);
 
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
index 4a52478c97cf..dee069c3865d 100644
--- a/arch/sh/drivers/pci/pci-sh7780.h
+++ b/arch/sh/drivers/pci/pci-sh7780.h
@@ -12,12 +12,11 @@
 #ifndef _PCI_SH7780_H_
 #define _PCI_SH7780_H_
 
-/* Platform Specific Values */
-#define SH7780_VENDOR_ID	0x1912
-#define SH7781_DEVICE_ID	0x0001
-#define SH7780_DEVICE_ID	0x0002
-#define SH7763_DEVICE_ID	0x0004
-#define SH7785_DEVICE_ID	0x0007
+#define PCI_VENDOR_ID_RENESAS		0x1912
+#define PCI_DEVICE_ID_RENESAS_SH7781	0x0001
+#define PCI_DEVICE_ID_RENESAS_SH7780	0x0002
+#define PCI_DEVICE_ID_RENESAS_SH7763	0x0004
+#define PCI_DEVICE_ID_RENESAS_SH7785	0x0007
 
 /* SH7780 Control Registers */
 #define	PCIECR			0xFE000008
@@ -36,35 +35,6 @@
 #define SH7780_PCIREG_BASE	0xFE040000	/* PCI regs base address */
 
 /* SH7780 PCI Config Registers */
-#define SH7780_PCIVID		0x000		/* Vendor ID */
-#define SH7780_PCIDID		0x002		/* Device ID */
-#define SH7780_PCICMD		0x004		/* Command */
-#define SH7780_PCISTATUS	0x006		/* Status */
-#define SH7780_PCIRID		0x008		/* Revision ID */
-#define SH7780_PCIPIF		0x009		/* Program Interface */
-#define SH7780_PCISUB		0x00a		/* Sub class code */
-#define SH7780_PCIBCC		0x00b		/* Base class code */
-#define SH7780_PCICLS		0x00c		/* Cache line size */
-#define SH7780_PCILTM		0x00d		/* latency timer */
-#define SH7780_PCIHDR		0x00e		/* Header type */
-#define SH7780_PCIBIST		0x00f		/* BIST */
-#define SH7780_PCIIBAR		0x010		/* IO Base address */
-#define SH7780_PCIMBAR0		0x014		/* Memory base address0 */
-#define SH7780_PCIMBAR1		0x018		/* Memory base address1 */
-#define SH7780_PCISVID		0x02c		/* Sub system vendor ID */
-#define SH7780_PCISID		0x02e		/* Sub system ID */
-#define SH7780_PCICP		0x034
-#define SH7780_PCIINTLINE	0x03c		/* Interrupt line */
-#define SH7780_PCIINTPIN	0x03d		/* Interrupt pin */
-#define SH7780_PCIMINGNT	0x03e		/* Minumum grand */
-#define SH7780_PCIMAXLAT	0x03f		/* Maxmum latency */
-#define SH7780_PCICID		0x040
-#define SH7780_PCINIP		0x041
-#define SH7780_PCIPMC		0x042
-#define SH7780_PCIPMCSR		0x044
-#define SH7780_PCIPMCSR_BSE	0x046
-#define SH7780_PCICDD		0x047
-
 #define SH7780_PCIIR		0x114		/* PCI Interrupt Register */
 #define SH7780_PCIIMR		0x118		/* PCI Interrupt Mask Register */
 #define SH7780_PCIAIR		0x11C		/* Error Address Register */
@@ -78,6 +48,8 @@
 
 #define SH7780_PCIMBR0		0x1E0
 #define SH7780_PCIMBMR0		0x1E4
+#define SH7780_PCIMBR1		0x1E8
+#define SH7780_PCIMBMR1		0x1EC
 #define SH7780_PCIMBR2		0x1F0
 #define SH7780_PCIMBMR2		0x1F4
 #define SH7780_PCIIOBR		0x1F8
@@ -87,16 +59,4 @@
 #define SH7780_PCICSAR0		0x218	/* Cache Snoop1 Addr. Register */
 #define SH7780_PCICSAR1		0x21C	/* Cache Snoop2 Addr. Register */
 
-/* General Memory Config Addresses */
-#define SH7780_CS0_BASE_ADDR	0x0
-#define SH7780_MEM_REGION_SIZE	0x04000000
-#define SH7780_CS1_BASE_ADDR	(SH7780_CS0_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS2_BASE_ADDR	(SH7780_CS1_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS3_BASE_ADDR	(SH7780_CS2_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS4_BASE_ADDR	(SH7780_CS3_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS5_BASE_ADDR	(SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS6_BASE_ADDR	(SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-
-#define SH7780_32BIT_DDR_BASE_ADDR	0x40000000
-
 #endif /* _PCI_SH7780_H_ */